Re: [Ekiga-list] Log

[Eugen Dedu <Eugen Dedu pu-pm univ-fcomte fr>]

Jan, your case is a bit difficult, I need to things:

1. with network enabled, and the account *name* as xyz%limit and account 
*user* as usual (Mediadev24, not ...%limit... !!!), give me the -d 4 log

2. give me the -d 4 log of ekiga 3.2.7 working.  To install that ekiga, 
uninstall first ekiga, uninstall gtk, install ekiga 3.2.7 from 
http://eugen.dedu.free.fr/aa, start ekiga and check if account 
parameters are ok, and finally restart ekiga with -d 4 and give us the 
log.  (Registration works in this case, is that right?)

Thank you!

On 03/01/13 05:57, Jan Laugesen wrote:
> Sry, will only reply to my own post in the future.
> Here is the log with network disabled http://pastebin.ca/2298893
> Here is the log with network enabled http://pastebin.ca/2298895
> Thanks
>
> *Gesendet:* Mittwoch, 02. Januar 2013 um 20:51 Uhr
> *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
> *An:* "Ekiga mailing list"<ekiga-list gnome org>
> *Betreff:* Re: [Ekiga-list] Log
> Jan, do not answer to other's posts, but to your own post.
>
> Now, please send us a -d 4 output with network enabled and one with
> network disabled.
>
> On 20/12/12 17:43, Jan Laugesen wrote:
>   >  thx so far. here is the log with enable network turned off
>   >  http://pastebin.ca/2295297
>   >  still unregistered even it's turned off and i restart Ekiga.
>   >  Here is the log after i changed the account-name http://pastebin.ca/2295299
>   >  it says processing now.
>   >  it is the ip pool ending address on my router, the one u asked about.
>   >
>   >  *Gesendet:* Donnerstag, 20. Dezember 2012 um 16:47 Uhr
>   >  *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
>   >  *An:* "Ekiga mailing list"<ekiga-list gnome org>
>   >  *Betreff:* Re: [Ekiga-list] Log
>   >  The first problem was solved, but another one surfaced: your
>   >  firewall/router changes packets, for ex. it adds the address
>   >  192.168.254.100, is this address of a firewall/router? I see this:
>   >
>   >  SIP/2.0 200 OK
>   >  CSeq: 2 REGISTER
>   >  Contact:<sip:Mediadev24@192.168.254.100:5060>;expires=3600
>   >
>   >  and:
>   >
>   >  2012/12/20 23:02:56.531 0:05.609 Pool:3840
>   >  SIP REGISTER returned no Contact addresses we requested, not really
>   >  registered.
>   >
>   >  Also, send me a log with Enable network detection checked off and tell
>   >  me if it works.
>   >
>   >  Finally, send me a log with: rename name of account to xyz%limit, quit
>   >  ekiga, restart it and send me the log (and tell me if it works).
>   >
>   >  On 20/12/12 16:07, Jan Laugesen wrote:
>   >  >  I see, that's why. Here is the new log http://pastebin.ca/2295275
>   >  >
>   >  >  *Gesendet:* Donnerstag, 20. Dezember 2012 um 15:43 Uhr
>   >  >  *Von:* "Eugen Dedu"<Eugen Dedu pu-pm univ-fcomte fr>
>   >  >  *An:* "Ekiga mailing list"<ekiga-list gnome org>
>   >  >  *Betreff:* Re: [Ekiga-list] Log
>   >  >  On 20/12/12 15:05, Jan Laugesen wrote:
>   >  >  >  Thx for the link. I'm done with the set-up and an Ekiga window (like a
> cmd) is
>   >  >  >  opening every time I'm logging on, but the status is still unregistered.
> I have
>   >  >  >  tried re-booting and filling in the account-information again, but seems it's
>   >  >  >  not helping.
>   >  >
>   >  >  The command window is normal, it is because it is a testing .exe for my
>   >  >  purposes, I can do one without it...
>   >  >
>   >  >  Please send me a log with this new version.
>   >  >
>   >  >  >  On 20/12/12 13:02, Jan Laugesen wrote:
>   >  >  >  >  Trying again....Here is the link http://pastebin.ca/2295222
>   >  >  >
>   >  >  >  Ok, this bug was fixed 1-2 weeks ago. You can use
>   >  >  >  http://eugen.dedu.free.fr/ekiga-setup-4.1.0-git-37_gb092039-ok.exe,
>   >  >  >  which has the fix (or wait until a new release appears).