Re: Network Manager drops wireless connections



> When the device is up, does 'iwlist eth1 scan' show any results?  If it
> does, but NM doesn't, then I think that's a bug in NM.

Hi,

OK, NM is running fine since I last booted, no hangups as yet.

When I run  'iwlist eth1 scan'  the results vary. Sometimes I get 

root localhost ~ > /sbin/iwlist eth1 scan
eth1      No scan results

if I try again straight away I get

root localhost ~ > /sbin/iwlist eth1 scan
eth1      Scan completed :
          Cell 01 - Address: 00:0C:41:9B:26:88
                    ESSID:"8MarfieldCourt"
                    Protocol:IEEE 802.11b
                    Mode:Master
                    Channel:10
                    Encryption key:off
                    Bit Rate:11 Mb/s
                    Extra: Rates (Mb/s): 1 2 5.5 11
                    Signal level=-56 dBm
                    Extra: Last beacon: 32ms ago

which is my network. Sometimes, I also get other neighbouring networks

root localhost ~ > /sbin/iwlist eth1 scan
eth1      Scan completed :
          Cell 01 - Address: 00:0C:41:9B:26:88
                    ESSID:"8MarfieldCourt"
                    Protocol:IEEE 802.11b
                    Mode:Master
                    Channel:10
                    Encryption key:off
                    Bit Rate:11 Mb/s
                    Extra: Rates (Mb/s): 1 2 5.5 11
                    Signal level=-50 dBm
                    Extra: Last beacon: 206ms ago
          Cell 02 - Address: 00:0C:41:9E:07:6A
                    ESSID:"antimony"
                    Protocol:IEEE 802.11bg
                    Mode:Master
                    Channel:11
                    Encryption key:off
                    Bit Rate:54 Mb/s
                    Extra: Rates (Mb/s): 1 2 5.5 6 9 11 12 18 24 36 48 54
                    Signal level=-88 dBm
                    Extra: Last beacon: 204ms ago


Does this indicate my signal strength is weak ( I did recently move my 
wireless station a little, although it is still next door about 5 metres away 
so pretty close)? NM always reports exactly 100% on the icon applet, which 
does now I think about it seem a little odd - Shouldn't it occasionally dip a 
little ? ( Also, I have NEVER had the little bar charts working when I left 
click on the applet - IS this also something I should worry about ? )


many thanks  

Chris



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]