RE: installing 2.8

["Dugas, Alan" <alan dugas analog com>]

Hmm... I believe GLIB_CONFIG needs to point directly to the file (i.e.
path/glib-config) not the directory containing the file, whereas LD_LIBRARY_PATH
needs to point to the directory holding the glib libraries.



				-- Stupid Genius

> ----------
> From: 	Matt Eisemann[SMTP:meisemann dsrnet com]
> Sent: 	Thursday, October 26, 2000 5:03 PM
> To: 	'Dugas, Alan'; gtk-list gnome org
> Subject: 	RE: installing 2.8
> 
> so should my LD_LIBRARY_PATH be set to the directory that contains the 
> files such as libglib.a, libglib.la, libgmodule.a... and so forth.
> If so, they both seem right.  The environment GLIB_CONFIG is set to 
> /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8 which is the directory which 
> contains the file glib-config.  Any other ideas?  I did not have this 
> variable set so thanks but I still get the exect same message as below.
> 
> Thanks for your help.
> 
> Matt
> 
> 
> 
> 
> -----Original Message-----
> From:	Dugas, Alan [SMTP:alan dugas analog com]
> Sent:	Thursday, October 26, 2000 4:34 PM
> To:	gtk-list gnome org; Matt Eisemann
> Subject:	RE: installing 2.8
> 
> Have you set environmental variables GLIB_CONFIG to point to the 
> glib-config
> file and LD_LIBRARY_PATH to include the directory containing the glib
> libraries?  These are environmental variables I had to set in order for me
> to get glib-1.2.8 and gtk+-1.2.8 installed locally (i.e. without root
> privleges) on a SPARC20.  Using this approach I managed to get both working
> under Solaris 5.6 and SunOS 4.1.4.
> 
> 
> 
> 				-- Stupid Genius
> 
> > ----------
> > From: 	Matt Eisemann[SMTP:meisemann dsrnet com]
> > Sent: 	Thursday, October 26, 2000 4:00 PM
> > To: 	gtk-list gnome org
> > Subject: 	installing 2.8
> >
> > Trying unsuccessfully to install GTK 1.2.8.  It looks like I succeffully
> > installed GLIB successfully and I downloaded 1.2.8 for both versions of
> > GTK+ and GLIB.  I am installing this on a Sun Solaris 2.6 machine, as far 
> > as I know and it seems the GLIB works succefully.  When I did the
> >    ./configure --prefix=/home/matt/mppcm/ssep/GTK/glib/glib-1.2.8
> >
> > both the make and the make install seemed to work but I did not check
> > everything that was printed out.
> >
> > For GTK+, I also did a similar command
> >
> >       ./configure --prefix=/home/matt/mppcm/ssep/GTK/gtk+-1.2.8
> >
> > and it seemed to work fine for a while till it got to the end where it
> > said
> > " checking for GLIB - version >= 1.2.8 ... ./configure:
> > /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> >
> > ./configure: /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> > ./configure: /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> > ./configure: /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> > ./configure: /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> > no
> > *** Could not run GLIB test program, checking why...
> > *** The test program failed to compile or link.  See the file config.log
> > for the
> > *** exact error that occured.  This usually means GLIB was incorrectly
> > installed
> > *** or that you have moved GLIB since it was installed.  In the latter
> > case, you
> > *** may want to edit the glib-config script:
> >  /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8
> > configure: error:
> > *** GLIB 1.2.8 or better is required.  The latest version of GLIB
> > *** is always available from ftp://ftp.gtk.org
> >
> > any ideas what happened?  There did not seem to be any errors when I
> > installed GLIB?  Since I do not have root privledge I have to use my 
> local
> >
> > directory and not
> > the /usr/local.
> >
> > Thanks for your help.
> >
> > Matt
> >
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > gtk-list mailing list
> > gtk-list gnome org
> > http://mail.gnome.org/mailman/listinfo/gtk-list
> > 
> 
> 
> _______________________________________________
> gtk-list mailing list
> gtk-list gnome org
> http://mail.gnome.org/mailman/listinfo/gtk-list
>