RE: installing 2.8

[Matt Eisemann <meisemann dsrnet com>]

so should my LD_LIBRARY_PATH be set to the directory that contains the 
files such as libglib.a, libglib.la, libgmodule.a... and so forth.
If so, they both seem right.  The environment GLIB_CONFIG is set to 
/home/matt/mppcm/ssep/GTK/glib/glib-1.2.8 which is the directory which 
contains the file glib-config.  Any other ideas?  I did not have this 
variable set so thanks but I still get the exect same message as below.

Thanks for your help.

Matt




-----Original Message-----
From:	Dugas, Alan [SMTP:alan dugas analog com]
Sent:	Thursday, October 26, 2000 4:34 PM
To:	gtk-list gnome org; Matt Eisemann
Subject:	RE: installing 2.8

Have you set environmental variables GLIB_CONFIG to point to the 
glib-config
file and LD_LIBRARY_PATH to include the directory containing the glib
libraries?  These are environmental variables I had to set in order for me
to get glib-1.2.8 and gtk+-1.2.8 installed locally (i.e. without root
privleges) on a SPARC20.  Using this approach I managed to get both working
under Solaris 5.6 and SunOS 4.1.4.



				-- Stupid Genius

> ----------
> From: 	Matt Eisemann[SMTP:meisemann dsrnet com]
> Sent: 	Thursday, October 26, 2000 4:00 PM
> To: 	gtk-list gnome org
> Subject: 	installing 2.8
>
> Trying unsuccessfully to install GTK 1.2.8.  It looks like I succeffully
> installed GLIB successfully and I downloaded 1.2.8 for both versions of
> GTK+ and GLIB.  I am installing this on a Sun Solaris 2.6 machine, as far 
> as I know and it seems the GLIB works succefully.  When I did the
>    ./configure --prefix=/home/matt/mppcm/ssep/GTK/glib/glib-1.2.8
>
> both the make and the make install seemed to work but I did not check
> everything that was printed out.
>
> For GTK+, I also did a similar command
>
>       ./configure --prefix=/home/matt/mppcm/ssep/GTK/gtk+-1.2.8
>
> and it seemed to work fine for a while till it got to the end where it
> said
> " checking for GLIB - version >= 1.2.8 ... ./configure:
> /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
>
> ./configure: /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> ./configure: /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> ./configure: /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> ./configure: /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8: cannot execute
> no
> *** Could not run GLIB test program, checking why...
> *** The test program failed to compile or link.  See the file config.log
> for the
> *** exact error that occured.  This usually means GLIB was incorrectly
> installed
> *** or that you have moved GLIB since it was installed.  In the latter
> case, you
> *** may want to edit the glib-config script:
>  /home/matt/mppcm/ssep/GTK/glib/glib-1.2.8
> configure: error:
> *** GLIB 1.2.8 or better is required.  The latest version of GLIB
> *** is always available from ftp://ftp.gtk.org
>
> any ideas what happened?  There did not seem to be any errors when I
> installed GLIB?  Since I do not have root privledge I have to use my 
local
>
> directory and not
> the /usr/local.
>
> Thanks for your help.
>
> Matt
>
>
>
>
>
>
>
>
> _______________________________________________
> gtk-list mailing list
> gtk-list gnome org
> http://mail.gnome.org/mailman/listinfo/gtk-list
>