Re: [gtk-list] Select timing, please test this program (was:Signals in Gtk+)

[Dino Sangoi <g1001863 univ trieste it>]

On 15 Sep 1998, Sascha Ziemann wrote:

> 
> Can please some people test the program on other systems? I would like
> to know how this problem is handled there.
> 
Hi,
   Under Digital Unix 4.0 the program compiles both with cc and gcc. But
it doesn't run, I get a "select 1 failed" error. With a perror() after the
select I get "./seltim: No such device". (I can copy with dd from
/dev/zero without problems). So the timings below are obtained opening a
big enough regular file.

This is an Alpha, I don't know the clock speed, but is low, not greater
than 275 MHz, On a very Loaded system (lots of people running netscape...)

starting test 1 with 5000 iterations ... done
starting test 2 with 5000 iterations ... done
results for: OSF1 uts.univ.trieste.it V4.0 564 alpha
select without timeout:    f1 =   16853.12 Hz     d1 =   0.059336 ms
select without reading:    f2 =     732.15 Hz     d2 =   1.365848 ms

Linux - Why use Windows, since there is a door?
=============================================================================
: Sangoi Dino Leonardo  :                 You can reach me on               :
: Via Della Roggia 27/2 :         Internet : g1001863@univ.trieste.it       :
: 33013 Gemona, Italy   :     Phone: +39 432 970036   Fax: +39 432 974171   :
=============================================================================