Re: [GnomeMeeting-list] PC-to-Phone with Quicknet

[b2g <ggb2g yahoo fr>]

Le Vendredi 28 Février 2003 05:33, derek indranet co nz a écrit :
> Hi,
>  thanks for your note.
>
> I am trying to get an idea of where the drivers are known to work.
>
> What version are you compiling - and what is your box?
I am using Linux Mandrake 9.1RC1 kernel 2.4.21pre4-6mdk (PII 450MHz, 256Mb 
RAM)


> Are you using the new (nixj) or the old (ixj) version ?
I got the nixj from openh323 cvs
>
> To find the version,
>  cat /proc/ixj |head
$Id: ixj.c,v 1.27 2003/02/26 21:53:22 dereks Exp $
$Id: ixj.h,v 1.8 2003/02/26 21:42:38 dereks Exp $
$Id: ixjuser.h,v 1.5 2003/02/26 21:42:39 dereks Exp $
$Id: ixj_data.h,v 1.7 2003/02/26 21:42:39 dereks Exp $
Driver version 2.0.1
sizeof IXJ struct 23852 bytes
sizeof DAA struct 642 bytes
Using old telephony API
Debug flags:


do you need more?
very good job. I wish I know how to code to help you.
Gerald
>
> Derek.
> ===========================================================================
>=====
>
> On Fri, 28 Feb 2003, b2g wrote:
> > OK!
> > I was afraid to go for compiling but finally it went smoothly and it
> > works! Thanks to you guys.
> > Gerald
> >
> > Le Jeudi 27 Février 2003 18:58, Damien Sandras a écrit :
> > > Le jeu 27/02/2003 à 10:01, derek indranet co nz a écrit :
> > > > Now, you should be able to run Gnomemeeting as an ordinary user.
> > > >
> > > > Running Gnomemeeting as root - surely, this a security problem?
> > >
> > > I didn't suggest to run GnomeMeeting as root, I suggested to try to run
> > > it as root to determine if it is a permissions problem. If it is simply
> > > a permission problem, no need to install a new driver version.
> > >
> > > > Derek.
> > > > ========
> > > >
> > > > On 27 Feb 2003, Damien Sandras wrote:
> > > > > Le jeu 27/02/2003 à 07:31, b2g a écrit :
> > > > > > 1. yes I've subscribe to microtelco service through linuxjack.com
> > > > > > and get a special gnomemeeting account. Gnomemeeting is connected
> > > > > > to the hote gatekeeper gk.microtelco.com and display something
> > > > > > like : bmac ip-similar-number  And I can check online my account
> > > > > > status through GM.
> > > > >
> > > > > That's correct :)
> > > > >
> > > > > > 2. I've check the rights:  /proc/ixj is r--r--r--. Is it that I
> > > > > > have to check?
> > > > >
> > > > > No, but simply running GnomeMeeting as "root" could help to
> > > > > determine if it is a permission problem. If it detects the
> > > > > /dev/phone0 as root, then it is ok.
> > > > >
> > > > > Also, do you have any /dev/phone0 or /dev/phone device ?
> > > > >
> > > > > > 3. the output of cat /proc/ixj is:
> > > > > > ====================================
> > > > > > $Id: ixj.c,v 4.7 2001/08/13 06:19:33 craigs Exp $
> > > > > > $Id: ixj.h,v 4.1 2001/08/04 14:49:27 craigs Exp $
> > > > > > $Id: ixjuser.h,v 4.1 2001/08/05 00:17:37 craigs Exp $
> > > > > > Driver version 1.0.1
> > > > > > sizeof IXJ struct 21144 bytes
> > > > > > sizeof DAA struct 642 bytes
> > > > > > Using old telephony API
> > > > > > Debug Level 0
> > > > > >
> > > > > > Card Num 0
> > > > > > DSP Base Address 0xb000
> > > > > > XILINX Base Address 0xb010
> > > > > > DSP Type 8022
> > > > > > DSP Version 01.17
> > > > > > Serial Number 5119034c
> > > > > > Card Type = Internet PhoneJACK PCI
> > > > > > Readers 0
> > > > > > Writers 0
> > > > > > Capabilities 13
> > > > > > DSP Processor load 0
> > > > > > Caller ID data not sent
> > > > > > Play CODEC NO CODEC CHOSEN
> > > > > > Record CODEC NO CODEC CHOSEN
> > > > > > AEC Off
> > > > > > Rec volume 0x100
> > > > > > Play volume 0x100
> > > > > > DTMF prescale 0x40
> > > > > > Hook state 0
> > > > > > Port POTS
> > > > > > SLIC state RINGING
> > > > > > Base Frame 00.00
> > > > > > CID Base Frame  0
> > > > > > Timer Checks 3537
> > > > > > RX Ready Checks 3537
> > > > > > TX Ready Checks 3537
> > > > > > Frames Read 0
> > > > > > Frames Written 0
> > > > > > Dry Buffer 0
> > > > > > Read Waits 0
> > > > > > Write Waits 0
> > > > > > Status Waits 82
> > > > > > Status Wait Fails 0
> > > > > > PControl Waits 0
> > > > > > PControl Wait Fails 0
> > > > > > Is Control Ready Checks 0
> > > > > > Is Control Ready Check failures 0
> > > > > > =======================================
> > > > > >
> > > > > >
> > > > > > I am going to try to compile the latest driver to see if any
> > > > > > difference. I will probably recontact you guys for more help.
> > > > > > Thanks a lot for your help and this wonderful soft.
> > > > > >
> > > > > > Gerald
> > > > > >
> > > > > > _______________________________________________
> > > > > > GnomeMeeting-list mailing list
> > > > > > GnomeMeeting-list gnome org
> > > > > > http://mail.gnome.org/mailman/listinfo/gnomemeeting-list
> >
> > _______________________________________________
> > GnomeMeeting-list mailing list
> > GnomeMeeting-list gnome org
> > http://mail.gnome.org/mailman/listinfo/gnomemeeting-list