Re: Handspring

[Joakim Elofsson <joakimelofsson telia com>]

hi,
when you press hotsyncbutton (on cradel)
you should found somthing like this:
usbserial.c: Sony Clié 4.0 converter detected
visor.c: Sony Clié 4.0: Number of ports: 2
visor.c: Sony Clié 4.0: port 1, is for Generic use and is bound to ttyUSB0
visor.c: Sony Clié 4.0: port 2, is for HotSync use and is bound to ttyUSB1
usbserial.c: Sony Clié 4.0 converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
usbserial.c: Sony Clié 4.0 converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
usb.c: USB disconnect on device 14
usbserial.c: Sony Clié 4.0 converter now disconnected from ttyUSB0
usbserial.c: Sony Clié 4.0 converter now disconnected from ttyUSB1

in your syslog/dmesg

to check that you may run 'dmesg' in a terminalwindow
// Joakim Elofsson

On 20 Jan 2002 08:05:13 -0500
Neil West <westn cox net> wrote:

> I cannot get my handspring visor working with my RH 7.0 System.  I have
> compiled a 2.4.14 Kernel.  I am not so sure that the USB port is working
> properly.  How can I test that USB port and the gnome-pilot application?
> 
> Thanks for your help.
> 
> 
> 
> _______________________________________________
> gnome-pilot-list mailing list
> gnome-pilot-list gnome org
> http://mail.gnome.org/mailman/listinfo/gnome-pilot-list


-----------------------------------------
Joakim Elofsson <joakim elofsson home se>
http://hem.passagen.se/joakime/index.html