Re: gpilotd not working stable with my Clie SJ30

[Lars Weissflog <L RS-W DE>]

A little continuation of this story ;-((

trying to install apps via pilot-xfer works once and than ten times not,
too. It says_

fungata romanic:~/myfiles/Clie/Install> pilot-xfer -v
   .--------------------------------------------.
   | (c) Copyright 1996-2003, pilot-link team   |
   |   Join the pilot-link lists to help out.   |
   `--------------------------------------------'
   This is pilot-xfer, from pilot-link version 0.11.6

   Build target..: i686-pc-linux-gnu
   Build date....: Dec 28 2002 16:42:44

   pilot-link 0.11.6 is covered under the GPL/LGPL
   See the file COPYING under docs for more info.

   Please use -h for more detailed options.
fungata romanic:~/myfiles/Clie/Install> pilot-xfer -p /dev/pilot -i *

   Listening to port: /dev/pilot

   Please press the HotSync button now...
fungata romanic:~/myfiles/Clie/Install> pilot-xfer -p /dev/pilot -i *

   Listening to port: /dev/pilot

   Please press the HotSync button now...

fungata romanic:~/myfiles/Clie/Install> pilot-xfer -p /dev/pilot -i *

   Listening to port: /dev/pilot

   Please press the HotSync button now...



I can do this as often as I want. Same problem I guess. But which ...
????

Regs.
Lars



On Sat, 2002-12-28 at 23:03, Lars Weissflog wrote:
> Hi List,
> 
> after I seem to have got half-way to a working sync, I found this
> problem:
> 
> When I connect my SJ30 (Palm OS 4.1) for the first time to the Cable,
> kill any running gpilotd with 
> # killall gpilotd
> 
> and restart it with 
> # gpilotd --activate-goad-server gpilotd --goad-fd 16
> 
> and then switch my Clie on and tap on the hotsync-app, I get this:
> 
> --- snip ---
> gpilotd-Message: gnome-pilot 0.1.70 starting...
> gpilotd-Message: compiled for pilot-link version 0.11.5
> gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network]
> gpilotd-Message: Activating CORBA server
> gpilotd-Message: Watching ClieUSB (/dev/pilot)
> gpilotd-Message: setting PILOTRATE=57600
> 
> gpilotd-WARNING **: pi_accept_to: Connection timed out
> 
> gpilotd-WARNING **: pi_accept_to: timeout was 2 secs
> gpilotd-Message: Exiting (caught SIGINT)...
> --- snap ---
> off cours the Exit happens because I press Ctrl+C to end the gpilotd
> 
> 
> 
> Next, I cancel the hotsync on the Clie. 
> After restarting the gpilotd and initializing another Hotsync from the
> Clie, it SOMETIMES works, sometimes I have to repeat this
> switch-on-off-restard-deamon-bunch a couple of times until it connects
> one time. Anoying. Really. ;-(((
> 
> 
> I allready tried to upgrade pilot link to V 0.11.6 with success, as
> pilot-xfer -v gives me
> 
> --- snip ---
> romanic:/home/fungata # /usr/local/bin/pilot-xfer -v
>    .--------------------------------------------.
>    | (c) Copyright 1996-2003, pilot-link team   |
>    |   Join the pilot-link lists to help out.   |
>    `--------------------------------------------'
>    This is /usr/local/bin/pilot-xfer, from pilot-link version 0.11.6
> 
>    Build target..: i686-pc-linux-gnu
>    Build date....: Dec 28 2002 16:42:44
> 
>    pilot-link 0.11.6 is covered under the GPL/LGPL
>    See the file COPYING under docs for more info.
> 
>    Please use -h for more detailed options.
> 
> --- snap ---
> 
> 
> Compilation of gnome-pilot itself (v 0.1.71) failed with an Error I
> posted in this Thread:
> 
> http://mail.gnome.org/archives/gnome-pilot-list/2002-December/msg00039.html
> 
> So will this behaviour be gone after I recompile gnome-pilot? I wouldn't
> believe it. Anyway I'll have to wait until someone can provide help with
> that compile-error.
> 
> Here is some output from my syslog
> 
> --- snip ---
> ....
> ec 28 22:49:48 romanic kernel: usb.c: USB disconnect on device 00:07.2-2
> address 31
> Dec 28 22:49:48 romanic kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now disconnected from ttyUSB0
> Dec 28 22:49:48 romanic kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now disconnected from ttyUSB1
> Dec 28 22:49:48 romanic kernel: usb.c: kusbd: /sbin/hotplug remove 31
> Dec 28 22:49:48 romanic kernel: hub.c: port 1, portstatus 303, change 0,
> 1.5 Mb/s
> Dec 28 22:49:48 romanic kernel: hub.c: port 2, portstatus 100, change 2,
> 12 Mb/s
> Dec 28 22:49:48 romanic kernel: hub.c: port 2 enable change, status 100
> Dec 28 22:49:53 romanic kernel: hub.c: port 1, portstatus 303, change 0,
> 1.5 Mb/s
> Dec 28 22:49:53 romanic kernel: hub.c: port 2, portstatus 101, change 1,
> 12 Mb/s
> Dec 28 22:49:53 romanic kernel: hub.c: port 2 connection change
> Dec 28 22:49:53 romanic kernel: hub.c: port 2, portstatus 101, change 1,
> 12 Mb/s
> Dec 28 22:49:53 romanic kernel: hub.c: port 2, portstatus 101, change 0,
> 12 Mb/s
> Dec 28 22:49:53 romanic last message repeated 3 times
> Dec 28 22:49:53 romanic kernel: hub.c: port 2, portstatus 103, change 0,
> 12 Mb/s
> Dec 28 22:49:53 romanic kernel: hub.c: new USB device 00:07.2-2,
> assigned address 32
> Dec 28 22:49:53 romanic kernel: usb.c: kmalloc IF dedbeb40, numif 1
> Dec 28 22:49:53 romanic kernel: usb.c: new device strings: Mfr=1,
> Product=2, SerialNumber=0
> Dec 28 22:49:53 romanic kernel: usb.c: USB device number 32 default
> language ID 0x409
> Dec 28 22:49:53 romanic kernel: Manufacturer: Palm, Inc.
> Dec 28 22:49:53 romanic kernel: Product: Palm Handheld
> Dec 28 22:49:53 romanic kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter detected
> Dec 28 22:49:53 romanic kernel: visor.c: Handspring Visor / Palm 4.0 /
> Clié 4.x: Number of ports: 2
> Dec 28 22:49:53 romanic kernel: visor.c: Handspring Visor / Palm 4.0 /
> Clié 4.x: port 1, is for Generic use and is bound to ttyUSB0
> Dec 28 22:49:53 romanic kernel: visor.c: Handspring Visor / Palm 4.0 /
> Clié 4.x: port 2, is for HotSync use and is bound to ttyUSB1
> Dec 28 22:49:53 romanic kernel: usb-uhci.c: interrupt, status 2, frame#
> 1409
> Dec 28 22:49:53 romanic kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
> Dec 28 22:49:53 romanic kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
> Dec 28 22:49:53 romanic kernel: usb.c: serial driver claimed interface
> dedbeb40
> Dec 28 22:49:53 romanic kernel: usb.c: kusbd: /sbin/hotplug add 32
> Dec 28 22:49:53 romanic kernel: hub.c: port 1, portstatus 303, change 0,
> 1.5 Mb/s
> Dec 28 22:49:53 romanic kernel: hub.c: port 2, portstatus 103, change 0,
> 12 Mb/s
> Dec 28 22:50:11 romanic kernel: usb-uhci.c: interrupt, status 2, frame#
> 446
> Dec 28 22:50:11 romanic kernel: hub.c: port 1, portstatus 303, change 0,
> 1.5 Mb/s
> Dec 28 22:50:11 romanic kernel: hub.c: port 2, portstatus 100, change 3,
> 12 Mb/s
> Dec 28 22:50:11 romanic kernel: hub.c: port 2 connection change
> Dec 28 22:50:11 romanic kernel: hub.c: port 2, portstatus 100, change 3,
> 12 Mb/s
> Dec 28 22:50:11 romanic kernel: usb.c: USB disconnect on device
> 00:07.2-2 address 32
> Dec 28 22:50:11 romanic kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now disconnected from ttyUSB0
> Dec 28 22:50:11 romanic kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now disconnected from ttyUSB1
> Dec 28 22:50:11 romanic kernel: usb.c: kusbd: /sbin/hotplug remove 32
> Dec 28 22:50:11 romanic kernel: hub.c: port 1, portstatus 303, change 0,
> 1.5 Mb/s
> Dec 28 22:50:11 romanic kernel: hub.c: port 2, portstatus 100, change 2,
> 12 Mb/s
> Dec 28 22:50:11 romanic kernel: hub.c: port 2 enable change, status 100
> 
> 
> --- snap ---
> This looks quite good to me. But has anyone an Idea what to do to get
> gpilotd sync in a reliable manner?
> 
> Any Help greatly appreciated!
> 
> Regards
> Lars 
-- 
Lars Weissflog <L RS-W DE>