[gdome]gdome2 installing

[Peter Drienovsky <7drienovsky pauli fmph uniba sk>]

Dear team,

I'm not sure if this is the best way how to ask but I do not
know another. Be know, that before writing this, I've been looking for answer at many forums, but with no success. That is the reason why I'm asking you
personaly. 

My goal is to install gdome2 under Linux where I do not have root
access.

Firstly I've installed glib-1.2.10 to ~/usr by: 

(shell:) 
./configure --prefix=/home/d/7drienovsky/usr 
make 
make test (all ok) 
make install 

The problem occurs during installation of gdome2-0.7.1 to ~/usr by: 

./configure --prefix=/home/d/7drienovsky/usr 

Here goes error message: 

. 
. 
. 
checking for glib-config... /home/d/7drienovsky/usr/bin/glib-config 
checking for GLIB - version >= 1.2.10... 
*** 'glib-config --version' returned 1.2.10, but GLIB (1.2.7) 
*** was found! If glib-config was correct, then it is best 
*** to remove the old version of GLIB. You may also be able to fix the
error 
*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing 
*** /etc/ld.so.conf. Make sure you have run ldconfig if that is 
*** required on your system. 
*** If glib-config was wrong, set the environment variable GLIB_CONFIG 
*** to point to the correct copy of glib-config, and remove the file
config.cache 
*** before re-running configure 
no 
configure: error: Could not find GLIB (see config.log for details). 
. 
. 
. 

glib1.2.7 is realy instaled in root. 
Since I'm not root, I've done the following: 

(shell:) 
LD_LIBRARY_PATH="/home/d/7drienovsky/usr/lib/" 
echo $LD_LIBRARY_PATH 
(output:) 
/home/d/7drienovsky/usr/lib/ 

Then I repeated command: 

(shell:) 
./configure --prefix=/home/d/7drienovsky/usr 

but the output was the same: 

. 
. 
. 
checking for glib-config... /home/d/7drienovsky/usr/bin/glib-config 
checking for GLIB - version >= 1.2.10... 
*** 'glib-config --version' returned 1.2.10, but GLIB (1.2.7) 
*** was found! If glib-config was correct, then it is best 
*** to remove the old version of GLIB. You may also be able to fix the
error 
*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing 
*** /etc/ld.so.conf. Make sure you have run ldconfig if that is 
*** required on your system. 
*** If glib-config was wrong, set the environment variable GLIB_CONFIG 
*** to point to the correct copy of glib-config, and remove the file
config.cache 
*** before re-running configure 
no 
configure: error: Could not find GLIB (see config.log for details). 
. 
. 
. 

Please let me know how to correct this. 
Thank you.
--
Peter Drienovsky
Comenius University Bratislava
Slovak Republic