[Ekiga-list] no echo with sip:500 at ekiga.net

[Damien Sandras]

Le samedi 17 novembre 2007 à 09:02 -0200, Emmanuel Favre-Nicolin a
écrit :
> > If you hear the female voice, the problem is on the microphone side.
> >
> > When you pass the audio test, what is the delay between the time you
> > speak and the time you hear what you said ?
> 
> between 3 and 4 seconds, about 3.5 seconds.
> 
> When doing this test, I had another problem. 
> After 3.5 seconds, I hear a first echo with reasonnable intensity.
> After 7 seconds, I hear a 2n echo with greater intensity.
> After 10.5 seconds, I hear a 3rd echo with greater intensity and it is 
> saturating quite a lot! (then I stopped)
> 
> It look like echo are summing them. The reason was because the recording 
> source was mix. I switched to mic and then I hear normal echos, first echos 
> intensity is OK, and the 2nd echo is of smaller intensity etc....
> 
> After that modification, I observe no changes with sip:500 at ekiga.net, I just 
> here the woman voice.
> 
> >From time to time, the woman voice is stopped before ending and the traffic on 
> my ethernet card is symetric flux received=sent flux
> 
> When the woman voice is not cutted, the traffic on my ethernet card is not 
> symetric the sent flux stop before the received flux.
> 
> I don't know if thqt could help understanding what's happening here.

I don't understand what it could be...

Can you post a -d 4 output somehwere?
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   NOVACOM         : http://www.novacom.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras at ekiga.net