Re: [Ekiga-list] Call question

[Damien Sandras <dsandras seconix com>]

Le dimanche 30 décembre 2007 à 13:04 -0800, Christopher Dick a écrit :
> I am running two boxes with OpenSuSE 10.3 32-bit.  I
> installed Ekiga 2.0.11 on both of them, and registered
> SIP accounts with Ekiga as well.
> 
> I used the 500 ekiga net to test connectivity for both
> boxes, and everything seemed to be working fine.
> 
> I opened a PC-to-Phone account, and that seems to work
> just fine, too.
> 
> These two machines are on a LAN together (at the
> moment).  I used the STUN settings, as the firewall
> was detected as "Port restricted NAT" and recommended
> it.
> 
> I can call the other machine using the accounts I
> created, and the call seems to go through.  However,
> no video or audio is transmitted in a detectable form.
>  If I "dial" directly to the other machine's IP
> address, the call seems to go through, but again, no
> sound or video.
> 
> What should I look for as far as packages installed
> and/or setting I should look for?  Any ideas?

When using the IP address, do you use the internal IP address ?

-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   NOVACOM         : http://www.novacom.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras ekiga net