Re: [GnomeMeeting-list] phonedev module

[George <geboyd netzero net>]

Thanks for the help Damien,

I made a bad assumption that the IP translation in gnomemeeting would
take care of the masquerading on the network for pc to phone. I opened
the ports on the router and now pc to phone works as expected. 

I'm not familiar with gdb, but I think I figured out how to run
gnomemeeting in it. However, it doesn't produce a backtrace:

(gdb) run gnomemeeting
Starting program: /usr/bin/gnomemeeting gnomemeeting
Segmentation fault

This is all the output I get.

Please let me know if you need more info.

Thanks


> Hi,
> 
> Having a segfault is obviously not normal and it is the first report of
> that kind that I get.
> 
> I suggest you to :
> - run gnomemeeting in gdb and send me the backtrace by mail (not to the
> list)
> - check that your installation is correct, I suppose that you compiled
> GnomeMeeting yourself. Make sure that there were no old OpenH323
> libraries or headers on your system.
> 
> The fact that you didn't hear your correspondant indicates firewall
> problems. Are you sure that you have forwarded all required ports ?
> Have you tested normal calls (not PC-To-Phone) ?
> 
> Btw, Tunneling and Fast Start are required for MicroTelco to work.
> 
> Le jeu 06/03/2003 à 07:57, George a écrit :
> > As a follow up, this behaviour is the same with the ixj and nixj
> > drivers.
> > 
> > 
> >  
> > >  I downloaded and compiled the nixj drivers. The ixj and phonedev modules
> > >  load fine now. However, when I start gnomemeeting after entering my
> > >  microtelco information, gnomemeeting gives a segfault. If I clear the
> > >  error window, gnomemeeting seems to still work ok. If I remove my
> > >  microtelco information, gnomemeeting doesn't give the segfault anymore.
> > >  
> > >  When gnomemeeting gives the segfault, it doesn't produce a backtrace.
> > >  
> > >  When I try to use pc to phone, the other party can hear me but I cannot
> > >  hear them (except for one call only).
> > >  
> > >  System set up:
> > >  
> > >  RedHat 7.3 / Ximain Gnome 2
> > >  Kernel 2.4.18-10
> > >  nixj drivers
> > >  gnomemeeting 0.96
> > >  internet Phonejack card
> > >  IP translation enabled in gnomemeeting
> > >  Tried with and without fast start and tunneling enabled
> > >  
> > >  Can someone please help me to resolve these problems. Since purchasing
> > >  the internet Phonejack card and the microtelco account, I would REALLY
> > >  like to get this working.
> > >  
> > >  Thanks in advance,
> > >  
> > >  
-- 
George <geboyd netzero net>