Hi Damien, Thank you for your quick response. I immediately opened Ekiga in Feisty and went to internet settings and found that the ppp0 address was not present in the list of alternative interfaces, only eth1 and eth2 were displayed. This I had experienced previously when investigating non-registration. I closed Ekiga because I had to leave the computer briefly. When I returned, I opened Ekiga again. This time the ppp0 interface was displayed! So I selected it, clicked on "apply", closed and then re-opened Ekiga and my two accounts were instantly registered. I called <a href="mailto:500@ekiga.net">500@ekiga.net</a> and it worked perfectly. As feedback I mention that the delay was almost zero before my voice was played back to me. I also made an international call to the U.K. as a final test and everything was AOK, with quality equal to that which I am accustomed in Dapper. So Ekiga is up and running in Feisty, albeit with some uncertainty when starting. Thanks again for your help. If you have any thoughts about the initial non-appearence of the ppp0 interface, please let me know. I note your comments with regard to the Ekiga server being offline due to a power failure and I think you are correct in your analisis. Finally, is it possible for you, or another member of your team, to give me some guidance on the continuing problems I am experiencing in my efforts to get my webcam functioning in Ekiga and which are described in my original posting to this string. My decision to migrate to Feisty was specifically caused by my need to upgrade to Ekiga 2.0.11, which was not easy to accomplish in Dapper, and which offered greater prospects of success with my webcam project. Although this migration has resulted in some advances with the webcam, there remain serious difficulties to resolve. So I remain in need of expert help. The way forward is by no means clear to me. I will appreciate your comments. Regards, Ian Murdoch. <div class="gmail_quote">Message 3: <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> Date: Sat, 01 Dec 2007 11:42:08 +0100 From: Damien Sandras <<a href="mailto:dsandras@seconix.com">dsandras@seconix.com</a>> Subject: Re: [Ekiga-list] [Date Prev][Date Next] [Thread Prev][Thread Next] [Thread Index] [Date Index] [Author Index] Re: Problem getting Ekiga to work in Kubuntu Gutsy - Submitted by Jim Ruxton - Response by Damien Sandras in Vol 16, Issue 41, Message 5, Mon. N To: Ekiga mailing list <<a href="mailto:ekiga-list@gnome.org"> ekiga-list@gnome.org</a>> Message-ID: <1196505728.4165.11.camel@scorpion> Content-Type: text/plain; charset=UTF-8 Le vendredi 30 novembre 2007 ? 15:21 -0500, Ian Murdoch a ?crit : > Hi Damien, > I accidentally lost my copy of this thread, so had to take this copy > from your archives. Thank you for your recommendation. I looked at the > internet interfaces and found the following: > 1 - In Dapper, where Ekiga continues to work efficiently: Interface > address - ppp0[ <a href="http://190.83.59.138" target="_blank">190.83.59.138</a>] > 2 - In Feisty, where Ekiga will not register my account: Interface > addresses - ppp0[<a href="http://190.83.59.120" target="_blank"> 190.83.59.120</a>] > > - eth1:avahi[ <a href="http://169.254.7.219" target="_blank">169.254.7.219</a>] > > - eth2:avahi[<a href="http://169.254.8.201" target="_blank">169.254.8.201</a>] Please also note that <a href="http://Ekiga.net" target="_blank">Ekiga.net</a> was down most of the afternoon yesterday due to a power outage. If you tried during that time, it explains why it never worked... -- _ Damien Sandras </blockquote></div>