From treverxiao at gmail.com Wed Jun 13 10:15:20 2012 From: treverxiao at gmail.com (Yang Xiao) Date: Wed, 13 Jun 2012 18:15:20 +0800 Subject: [Ekiga-list] compile error with ptlib cannot find Message-ID: Hi I had below error when I try to ./configure --prefix=/usr or PKG_CONFIG_PATH=/usr/lib/pkgconfig ./configure --prefix=/usr. Please help. besides, I have successfully installed ptlib 2.6.7. ERRER LOG: checking for PTLIB... configure: error: Package requirements (ptlib >= 2.6.6) were not met: No package 'ptlib' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables PTLIB_CFLAGS and PTLIB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jun 13 12:45:42 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 13 Jun 2012 14:45:42 +0200 Subject: [Ekiga-list] compile error with ptlib cannot find In-Reply-To: References: Message-ID: <4FD88B76.50906@pu-pm.univ-fcomte.fr> On 13/06/12 12:15, Yang Xiao wrote: > Hi > I had below error when I try to ./configure --prefix=/usr or > PKG_CONFIG_PATH=/usr/lib/pkgconfig ./configure --prefix=/usr. Please > help. > > besides, I have successfully installed ptlib 2.6.7. > > ERRER LOG: > checking for PTLIB... configure: error: Package requirements (ptlib>= > 2.6.6) were not met: > > No package 'ptlib' found > > Consider adjusting the PKG_CONFIG_PATH environment variable if you > installed software in a non-standard prefix. > > Alternatively, you may set the environment variables PTLIB_CFLAGS > and PTLIB_LIBS to avoid the need to call pkg-config. > See the pkg-config man page for more details. What was the configure command for ptlib? It has probably been installed in /usr/local. Where is ptlib.pc found on your harddisk? Try for ekiga: PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./configure --prefix=/usr -- Eugen From coordinadorcallcenter at univerplus.com Wed Jun 20 21:22:21 2012 From: coordinadorcallcenter at univerplus.com (Paul Salamanca) Date: Wed, 20 Jun 2012 16:22:21 -0500 Subject: [Ekiga-list] Ayuda Ekiga Message-ID: Ayer se me cerro el ekiga y no me volvio a abrir, me aparece el icono en las aplicaciones en el escritorio, pero no me abre. Lo desistale y volv? a instalar 3 veces y nada no me abre. Que hago? Cordialmente; *PAUL SALAMANCA BLANCO *Coordinador Call Center Talentum CTA - UEN UNIVER ?PTICAS M?vil 3164913326 Bogot?-Colombia *PAntes de imprimir este mensaje, aseg?rate de que sea necesario. El medio ambiente est? en nuestras manos* -------------- next part -------------- An HTML attachment was scrubbed... URL: From russ at mannex.com Wed Jun 20 22:36:21 2012 From: russ at mannex.com (Russ Mannex) Date: Wed, 20 Jun 2012 15:36:21 -0700 Subject: [Ekiga-list] Ayuda Ekiga In-Reply-To: References: Message-ID: <1340231781.15502.9.camel@Leviathan> Por favor perdonen mi Espa?ol malo. Qu? sistema operativo est? usando? Lo que sucede cuando se ejecuta desde la l?nea de comandos? -- -Mannex -----Original Message----- From: Paul Salamanca Reply-to: Ekiga mailing list To: ekiga-list at gnome.org Subject: [Ekiga-list] Ayuda Ekiga Date: Wed, 20 Jun 2012 16:22:21 -0500 Que hago? -------------- next part -------------- An HTML attachment was scrubbed... URL: From coordinadorcallcenter at univerplus.com Wed Jun 20 22:54:32 2012 From: coordinadorcallcenter at univerplus.com (Paul Salamanca) Date: Wed, 20 Jun 2012 17:54:32 -0500 Subject: [Ekiga-list] Ayuda Ekiga In-Reply-To: <1340231781.15502.9.camel@Leviathan> References: <1340231781.15502.9.camel@Leviathan> Message-ID: Linux Ubuntu El 20/06/12, Russ Mannex escribi?: > Por favor perdonen mi Espa?ol malo. > > Qu? sistema operativo est? usando? > > Lo que sucede cuando se ejecuta desde la l?nea de comandos? > > -- > -Mannex > > > > -----Original Message----- > From: Paul Salamanca > Reply-to: Ekiga mailing list > To: ekiga-list at gnome.org > Subject: [Ekiga-list] Ayuda Ekiga > Date: Wed, 20 Jun 2012 16:22:21 -0500 > > Que hago? > -- Cordialmente; *PAUL SALAMANCA BLANCO *Coordinador Call Center Talentum CTA - UEN UNIVER ?PTICAS M?vil 3164913326 Bogot?-Colombia *PAntes de imprimir este mensaje, aseg?rate de que sea necesario. El medio ambiente est? en nuestras manos* From russ at mannex.com Wed Jun 20 22:59:33 2012 From: russ at mannex.com (Russ Mannex) Date: Wed, 20 Jun 2012 15:59:33 -0700 Subject: [Ekiga-list] Ayuda Ekiga In-Reply-To: References: <1340231781.15502.9.camel@Leviathan> Message-ID: <1340233173.15502.13.camel@Leviathan> Pruebe esto en la l?nea de comandos: ekiga -d 4 Se deber? imprimir la informaci?n de depuraci?n mucho m?s. Si hay demasiada informaci?n, usted puede reducir el n?mero. H?ganos saber lo que hay. -- -Mannex -----Original Message----- From: Paul Salamanca Reply-to: Ekiga mailing list To: Ekiga mailing list Subject: Re: [Ekiga-list] Ayuda Ekiga Date: Wed, 20 Jun 2012 17:54:32 -0500 Linux Ubuntu El 20/06/12, Russ Mannex escribi?: > Por favor perdonen mi Espa?ol malo. > > Qu? sistema operativo est? usando? > > Lo que sucede cuando se ejecuta desde la l?nea de comandos? > > -- > -Mannex > > > > -----Original Message----- > From: Paul Salamanca > Reply-to: Ekiga mailing list > To: ekiga-list at gnome.org > Subject: [Ekiga-list] Ayuda Ekiga > Date: Wed, 20 Jun 2012 16:22:21 -0500 > > Que hago? > -------------- next part -------------- An HTML attachment was scrubbed... URL: From bartosz.c at gmail.com Wed Jun 27 07:09:08 2012 From: bartosz.c at gmail.com (Bartosz.C) Date: Wed, 27 Jun 2012 09:09:08 +0200 Subject: [Ekiga-list] polycom qdx 6000 Message-ID: Hi, I have a problem with ekiga (windows 7 on dell vostro 1540) + polycom qdx 6000 h.323. Audio works well, but video is gone. In both places video not working - on the ekiga and on the polycom. I made a debug from videoconference - but it has 466kb. I saw in faq "dont sent files larger than 30kb" so Im putting it outside: http://www.sendspace.com/file/cb9lus I would be grateful for any idea what could be wrong. Bartosz. From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jun 27 08:21:03 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 27 Jun 2012 10:21:03 +0200 Subject: [Ekiga-list] polycom qdx 6000 In-Reply-To: References: Message-ID: <4FEAC26F.4080606@pu-pm.univ-fcomte.fr> On 27/06/12 09:09, Bartosz.C wrote: > Hi, > I have a problem with ekiga (windows 7 on dell vostro 1540) + polycom > qdx 6000 h.323. > Audio works well, but video is gone. > In both places video not working - on the ekiga and on the polycom. > > I made a debug from videoconference - but it has 466kb. I saw in faq > "dont sent files larger than 30kb" so Im putting it outside: > http://www.sendspace.com/file/cb9lus There is no call in that debug file, so you need to redo it. Also, I noticed several fixes for Polycom made recently, *after* the release, and it appears that interoperation with Polycom works well now. However, we are still preparing a new release... -- Eugen Dedu http://eugen.dedu.free.fr From bartosz.c at gmail.com Wed Jun 27 10:32:05 2012 From: bartosz.c at gmail.com (Bartosz.C) Date: Wed, 27 Jun 2012 12:32:05 +0200 Subject: [Ekiga-list] polycom qdx 6000 In-Reply-To: <4FEAC26F.4080606@pu-pm.univ-fcomte.fr> References: <4FEAC26F.4080606@pu-pm.univ-fcomte.fr> Message-ID: On 27 June 2012 10:21, Eugen Dedu wrote: > On 27/06/12 09:09, Bartosz.C wrote: >> >> Hi, >> I have a problem with ekiga (windows 7 on dell vostro 1540) + polycom >> qdx 6000 h.323. >> Audio works well, but video is gone. >> In both places video not working - on the ekiga and on the polycom. >> >> I made a debug from videoconference - but it has 466kb. I saw in faq >> "dont sent files larger than 30kb" so Im putting it outside: >> http://www.sendspace.com/file/cb9lus > > > There is no call in that debug file, so you need to redo it. > > Also, I noticed several fixes for Polycom made recently, *after* the > release, and it appears that interoperation with Polycom works well now. > ?However, we are still preparing a new release... > > -- > Eugen Dedu > http://eugen.dedu.free.fr > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > https://mail.gnome.org/mailman/listinfo/ekiga-list Thanks, Im sending new debug - it should be fine. http://www.sendspace.com/file/ltdv2o My release version in Polycom r-4-0-2-3152 - i think its one of the newest. Bartosz. From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jun 27 11:35:20 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 27 Jun 2012 13:35:20 +0200 Subject: [Ekiga-list] polycom qdx 6000 In-Reply-To: References: <4FEAC26F.4080606@pu-pm.univ-fcomte.fr> Message-ID: <4FEAEFF8.8070902@pu-pm.univ-fcomte.fr> On 27/06/12 12:32, Bartosz.C wrote: > On 27 June 2012 10:21, Eugen Dedu wrote: >> On 27/06/12 09:09, Bartosz.C wrote: >>> >>> Hi, >>> I have a problem with ekiga (windows 7 on dell vostro 1540) + polycom >>> qdx 6000 h.323. >>> Audio works well, but video is gone. >>> In both places video not working - on the ekiga and on the polycom. >>> >>> I made a debug from videoconference - but it has 466kb. I saw in faq >>> "dont sent files larger than 30kb" so Im putting it outside: >>> http://www.sendspace.com/file/cb9lus >> >> >> There is no call in that debug file, so you need to redo it. >> >> Also, I noticed several fixes for Polycom made recently, *after* the >> release, and it appears that interoperation with Polycom works well now. >> However, we are still preparing a new release... >> >> -- >> Eugen Dedu >> http://eugen.dedu.free.fr >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> https://mail.gnome.org/mailman/listinfo/ekiga-list > > Thanks, > Im sending new debug - it should be fine. > http://www.sendspace.com/file/ltdv2o > My release version in Polycom > r-4-0-2-3152 - i think its one of the newest. I will take a look. The fixes I spoke about were for ekiga, not for Polycom. -- Eugen From tecnico.sistemas at igualdadebenestar.org Fri Jun 29 12:50:06 2012 From: tecnico.sistemas at igualdadebenestar.org (Jose Luis Suarez) Date: Fri, 29 Jun 2012 14:50:06 +0200 Subject: [Ekiga-list] must always type @domain_name in sip calls Message-ID: <4FEDA47E.2090800@igualdadebenestar.org> Hello. I've just installed Ubuntu 12.04 and Ekiga 3.3.2 from repositories. I have an Asterisk pbx and register with my sip account Name: 76 Server: 192.168.1.200 User: 76 Authentication user: 76 Password: ******* Expiration time: 3600 and this is the only existing Ekiga account. All I usually do works fine whith this only exception: In every sip call I always must introduce the phone number + @192.168.1.200 Formerly it was enough just type the phone number, being default account server used. Is this a known issue? I am missing some configuration? I tried to install 3.2.7 version in Ubuntu 12.04, but not possible for dependencies problesm. Thank you very much. -- Jos? Luis Su?rez. Tlf:981568705 ext.76 Departamento de Sistemas Consorcio Galego de Servizos de Igualdade e Benestar From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Jun 29 14:20:53 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 29 Jun 2012 16:20:53 +0200 Subject: [Ekiga-list] polycom qdx 6000 In-Reply-To: References: <4FEAC26F.4080606@pu-pm.univ-fcomte.fr> Message-ID: <4FEDB9C5.9090200@pu-pm.univ-fcomte.fr> On 27/06/12 12:32, Bartosz.C wrote: > On 27 June 2012 10:21, Eugen Dedu wrote: >> On 27/06/12 09:09, Bartosz.C wrote: >>> >>> Hi, >>> I have a problem with ekiga (windows 7 on dell vostro 1540) + polycom >>> qdx 6000 h.323. >>> Audio works well, but video is gone. >>> In both places video not working - on the ekiga and on the polycom. >>> >>> I made a debug from videoconference - but it has 466kb. I saw in faq >>> "dont sent files larger than 30kb" so Im putting it outside: >>> http://www.sendspace.com/file/cb9lus >> >> >> There is no call in that debug file, so you need to redo it. >> >> Also, I noticed several fixes for Polycom made recently, *after* the >> release, and it appears that interoperation with Polycom works well now. >> However, we are still preparing a new release... >> > Thanks, > Im sending new debug - it should be fine. > http://www.sendspace.com/file/ltdv2o > My release version in Polycom > r-4-0-2-3152 - i think its one of the newest. Ah, sorry, it is h323, not sip... I do not know this one, hoping someone else can help you. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Jun 29 14:35:36 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 29 Jun 2012 16:35:36 +0200 Subject: [Ekiga-list] must always type @domain_name in sip calls In-Reply-To: <4FEDA47E.2090800@igualdadebenestar.org> References: <4FEDA47E.2090800@igualdadebenestar.org> Message-ID: <4FEDBD38.1080207@pu-pm.univ-fcomte.fr> On 29/06/12 14:50, Jose Luis Suarez wrote: > Hello. > I've just installed Ubuntu 12.04 and Ekiga 3.3.2 from repositories. > I have an Asterisk pbx and register with my sip account > Name: 76 > Server: 192.168.1.200 > User: 76 > Authentication user: 76 > Password: ******* > Expiration time: 3600 > > and this is the only existing Ekiga account. > > All I usually do works fine whith this only exception: > In every sip call I always must introduce the phone number + @192.168.1.200 > > Formerly it was enough just type the phone number, being default account > server used. > > Is this a known issue? > I am missing some configuration? This is related to https://bugzilla.gnome.org/show_bug.cgi?id=589119. Please comment there so that it gets fixed properly. -- Eugen