From dave at dawoodfall.net Fri Aug 3 00:53:59 2012 From: dave at dawoodfall.net (David Woodfall) Date: Fri, 3 Aug 2012 01:53:59 +0100 Subject: [Ekiga-list] Make problem Message-ID: <20120803005359.GA21625@Junius> Hi, I just tried to compile ekiga 3.3.2 on slackware 14 beta 1 This is the compile error: In file included from ../../../../lib/engine/components/call-history/history-book.h:42:0, from ../../../../lib/engine/components/call-history/history-book.cpp:46: ../../../../lib/engine/addressbook/book-impl.h: In instantiation of ?void Ekiga::BookImpl::add_contact(gmref_ptr) [with ContactType = History::Contact]?: ../../../../lib/engine/components/call-history/history-book.cpp:107:3: required from here ../../../../lib/engine/addressbook/book-impl.h:207:3: error: ?add_object? was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive] ../../../../lib/engine/addressbook/book-impl.h:207:3: note: declarations in dependent base ?Ekiga::RefLister? are not found by unqualified lookup ../../../../lib/engine/addressbook/book-impl.h:207:3: note: use ?this->add_object? instead make[6]: *** [history-book.lo] Error 1 Anyone any ideas on a fix please? Cheers David From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Aug 3 07:40:00 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 03 Aug 2012 09:40:00 +0200 Subject: [Ekiga-list] Make problem In-Reply-To: <20120803005359.GA21625@Junius> References: <20120803005359.GA21625@Junius> Message-ID: <501B8050.3020605@pu-pm.univ-fcomte.fr> On 03/08/12 02:53, David Woodfall wrote: > Hi, I just tried to compile ekiga 3.3.2 on slackware 14 beta 1 > > This is the compile error: > > > In file included from > ../../../../lib/engine/components/call-history/history-book.h:42:0, from > ../../../../lib/engine/components/call-history/history-book.cpp:46: > ../../../../lib/engine/addressbook/book-impl.h: In instantiation of > ?void Ekiga::BookImpl::add_contact(gmref_ptr) [with > ContactType = History::Contact]?: > ../../../../lib/engine/components/call-history/history-book.cpp:107:3: > required from here ../../../../lib/engine/addressbook/book-impl.h:207:3: > error: ?add_object? was not declared in this scope, and no declarations > were found by argument-dependent lookup at the point of instantiation > [-fpermissive] > ../../../../lib/engine/addressbook/book-impl.h:207:3: note: declarations > in dependent base ?Ekiga::RefLister? are not found by > unqualified lookup ../../../../lib/engine/addressbook/book-impl.h:207:3: > note: use ?this->add_object? instead make[6]: *** [history-book.lo] Error 1 > > Anyone any ideas on a fix please? Apply the patch at http://git.gnome.org/browse/ekiga/commit/?id=f81a43f2c4ed5. -- Eugen From hydrometeor at gmail.com Sun Aug 5 05:43:52 2012 From: hydrometeor at gmail.com (Hydro Meteor) Date: Sun, 5 Aug 2012 00:43:52 -0500 Subject: [Ekiga-list] Ekiga and Mac OS X Message-ID: Hello, I'm totally new to Ekiga and it looks like a great project. I am wondering why Ekiga is not capable of running on Mac OS X? This is somewhat perplexing considering Ekiga can run on Linux and Windows and not to mention OPAL can run on Unix (and this means it should run on modern major versions of OS X such as Snow Leopard, Lion, Mountain Lion). Thank you! -hydro -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Sun Aug 5 16:25:56 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sun, 05 Aug 2012 18:25:56 +0200 Subject: [Ekiga-list] Ekiga and Mac OS X In-Reply-To: References: Message-ID: <501E9E94.7040507@pu-pm.univ-fcomte.fr> On 05/08/12 07:43, Hydro Meteor wrote: > Hello, > > I'm totally new to Ekiga and it looks like a great project. I am wondering > why Ekiga is not capable of running on Mac OS X? This is somewhat > perplexing considering Ekiga can run on Linux and Windows and not to > mention OPAL can run on Unix (and this means it should run on modern major > versions of OS X such as Snow Leopard, Lion, Mountain Lion). Someone with a MacOS system should look into this and see if there are problems and fi them if any... If you can help, please do. -- Eugen From hydrometeor at gmail.com Fri Aug 10 05:28:27 2012 From: hydrometeor at gmail.com (Hydro Meteor) Date: Fri, 10 Aug 2012 00:28:27 -0500 Subject: [Ekiga-list] Ekiga and Mac OS X In-Reply-To: <501E9E94.7040507@pu-pm.univ-fcomte.fr> References: <501E9E94.7040507@pu-pm.univ-fcomte.fr> Message-ID: On Sun, Aug 5, 2012 at 11:25 AM, Eugen Dedu wrote: > On 05/08/12 07:43, Hydro Meteor wrote: > >> Hello, >> >> I'm totally new to Ekiga and it looks like a great project. I am wondering >> why Ekiga is not capable of running on Mac OS X? This is somewhat >> perplexing considering Ekiga can run on Linux and Windows and not to >> mention OPAL can run on Unix (and this means it should run on modern major >> versions of OS X such as Snow Leopard, Lion, Mountain Lion). >> > > Someone with a MacOS system should look into this and see if there are > problems and fi them if any... If you can help, please do. > A good idea. I'm kind of surprised no one has tried this yet. Isn't there anyone in the Ekiga community who has a Mac and wants to use Ekiga on Mac OS X? -h > > -- > Eugen > ______________________________**_________________ > ekiga-list mailing list > ekiga-list at gnome.org > https://mail.gnome.org/**mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Aug 10 06:18:44 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 10 Aug 2012 08:18:44 +0200 Subject: [Ekiga-list] Ekiga and Mac OS X In-Reply-To: References: <501E9E94.7040507@pu-pm.univ-fcomte.fr> Message-ID: <5024A7C4.4050302@pu-pm.univ-fcomte.fr> On 10/08/12 07:28, Hydro Meteor wrote: > On Sun, Aug 5, 2012 at 11:25 AM, Eugen Dedu> wrote: > >> On 05/08/12 07:43, Hydro Meteor wrote: >> >>> Hello, >>> >>> I'm totally new to Ekiga and it looks like a great project. I am wondering >>> why Ekiga is not capable of running on Mac OS X? This is somewhat >>> perplexing considering Ekiga can run on Linux and Windows and not to >>> mention OPAL can run on Unix (and this means it should run on modern major >>> versions of OS X such as Snow Leopard, Lion, Mountain Lion). >>> >> >> Someone with a MacOS system should look into this and see if there are >> problems and fi them if any... If you can help, please do. >> > > A good idea. I'm kind of surprised no one has tried this yet. Isn't there > anyone in the Ekiga community who has a Mac and wants to use Ekiga on Mac > OS X? There are, but no one is helping with that. -- Eugen From sri_k_n at yahoo.com Thu Aug 16 14:59:55 2012 From: sri_k_n at yahoo.com (Sridhar K.N.) Date: Thu, 16 Aug 2012 22:59:55 +0800 (SGT) Subject: [Ekiga-list] Remote Video only in Full Screen Mode. Message-ID: <1345129195.80632.YahooMailNeo@web190804.mail.sg3.yahoo.com> Dear All, I'm new to Ekiga, and would first like to thank the developers. I would like to know if it is possible to have only remote-video when we do the full screen? Currently when I choose the fullscreen it shows both remote and local in PIP. I have chosen only Remote video from the view tab. I'm using 3.2.7 version on Ubuntu 11.10. Any suggestion would be extremely appreciated. Thanks and Regards Sridhar -------------- next part -------------- An HTML attachment was scrubbed... URL: From satyagunturi at yahoo.co.in Thu Aug 16 15:11:35 2012 From: satyagunturi at yahoo.co.in (Sreenivas Gunturi) Date: Thu, 16 Aug 2012 23:11:35 +0800 (SGT) Subject: [Ekiga-list] Not able to see remote video Message-ID: <1345129895.97753.YahooMailNeo@web193503.mail.sg3.yahoo.com> Hi I had raised this issue a few months ago but did not get any solution.? Hence I am posting again... I am not able to do any video call with Ekiga.? At the most I see my own picture but never the other side.? In fact the option View-> Remote Video is always greyed out.? I have tried it now on Windows 7, Mageia, fedora and mint but it has never worked.? I have installed and reinstalled the software a number of times but have not been able to make it work.? Any help will be greatly appreciated! Regards Sreenivas -------------- next part -------------- An HTML attachment was scrubbed... URL: From stuart at gathman.org Thu Aug 16 16:07:53 2012 From: stuart at gathman.org (Stuart Gathman) Date: Thu, 16 Aug 2012 12:07:53 -0400 Subject: [Ekiga-list] Not able to see remote video In-Reply-To: <1345129895.97753.YahooMailNeo@web193503.mail.sg3.yahoo.com> References: <1345129895.97753.YahooMailNeo@web193503.mail.sg3.yahoo.com> Message-ID: <502D1AD9.8010303@gathman.org> Long ago, Nostradamus foresaw that on 08/16/2012 11:11 AM, Sreenivas Gunturi would write: > > I am not able to do any video call with Ekiga. At the most I see my > own picture but never the other side. In fact the option View-> > Remote Video is always greyed out. I have tried it now on Windows 7, > Mageia, fedora and mint but it has never worked. I have installed and > reinstalled the software a number of times but have not been able to > make it work. Any help will be greatly appreciated! > The remote end has to enable sending video. The option being greyed out suggests that as the problem. If the option was active, but you didn't actually see any video, that would suggest a firewall or NAT problem (although usually such problems would affect audio also). -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Aug 16 19:52:36 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 16 Aug 2012 21:52:36 +0200 Subject: [Ekiga-list] Not able to see remote video In-Reply-To: <1345129895.97753.YahooMailNeo@web193503.mail.sg3.yahoo.com> References: <1345129895.97753.YahooMailNeo@web193503.mail.sg3.yahoo.com> Message-ID: <502D4F84.8030607@pu-pm.univ-fcomte.fr> On 16/08/12 17:11, Sreenivas Gunturi wrote: > Hi > > I had raised this issue a few months ago but did not get any solution. Hence I am posting again... > > > I am not able to do any video call with Ekiga. At the most I see my own picture but never the other side. In fact the option View-> Remote Video is always greyed out. I have tried it now on Windows 7, Mageia, fedora and mint but it has never worked. I have installed and reinstalled the software a number of times but have not been able to make it work. Any help will be greatly appreciated! Well, I looked over your trace and do not see where the problem is, sorry. Before looking into more detail, could you test the latest Windows release, http://eugen.dedu.free.fr/ekiga-setup-3.3.3-git-456_g3c233b5-ok.exe, and tell me if the problem is still there? -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Aug 17 12:13:30 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 17 Aug 2012 14:13:30 +0200 Subject: [Ekiga-list] Remote Video only in Full Screen Mode. In-Reply-To: <1345129195.80632.YahooMailNeo@web190804.mail.sg3.yahoo.com> References: <1345129195.80632.YahooMailNeo@web190804.mail.sg3.yahoo.com> Message-ID: <502E356A.1050607@pu-pm.univ-fcomte.fr> On 16/08/12 16:59, Sridhar K.N. wrote: > Dear All, > > I'm new to Ekiga, and would first like to thank the developers. > > > I would like to know if it is possible to have only remote-video when we do the full screen? Currently when I choose the fullscreen it shows both remote and local in PIP. I have chosen only Remote video from the view tab. > > > I'm using 3.2.7 version on Ubuntu 11.10. Any suggestion would be extremely appreciated. No, it is not possible, even with the last version. Is it so important for you to have only remote video on fullscreen? -- Eugen From patrik.lermon at gmail.com Sat Aug 18 06:16:38 2012 From: patrik.lermon at gmail.com (Patrik Lermon) Date: Sat, 18 Aug 2012 08:16:38 +0200 Subject: [Ekiga-list] Passwords stored and sent unencrypted - Security problem Message-ID: Greetings. I'm not sure this is the correct list, but I just performed a password reset on my ekiga.net account (here: https://www.ekiga.net/index.php?page=forgot), and I was not very pleased by receiving my password back in plain text. This means ekiga not only stores my password (hopefully not in clear text, but what do I know), but also chooses to send my password unencrypted via mail. Ekiga should only store a hash, preferably salted, and thus not send the password but instead offer me to reset it and choose a new password. I would like to get in touch with someone with the power to change this behavior. Best regards, Patrik From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Aug 20 13:27:19 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 20 Aug 2012 15:27:19 +0200 Subject: [Ekiga-list] Passwords stored and sent unencrypted - Security problem In-Reply-To: References: Message-ID: <50323B37.80102@pu-pm.univ-fcomte.fr> On 18/08/12 08:16, Patrik Lermon wrote: > Greetings. > > I'm not sure this is the correct list, but I just performed a password > reset on my ekiga.net account (here: > https://www.ekiga.net/index.php?page=forgot), and I was not very > pleased by receiving my password back in plain text. > > This means ekiga not only stores my password (hopefully not in clear > text, but what do I know), but also chooses to send my password > unencrypted via mail. Ekiga should only store a hash, preferably > salted, and thus not send the password but instead offer me to reset > it and choose a new password. > I would like to get in touch with someone with the power to change > this behavior. At http://wiki.ekiga.org/index.php/Manual#Authors you will find the authors of ekiga. See also https://bugzilla.gnome.org/show_bug.cgi?id=568135. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Aug 20 15:46:31 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 20 Aug 2012 17:46:31 +0200 Subject: [Ekiga-list] Beta release Message-ID: <50325BD7.5000408@pu-pm.univ-fcomte.fr> For your information, ekiga team agreed to do a beta release in two days. The new stable release should appear next month. Feel free to test it, I consider it overall (much) better than last stable release, 3.2.7. Here is the NEWS file, compared to ekiga unstable 3.3.2: * Changes in ekiga 3.9.90 (2012-08-20) ** Major user-visible fixes - Major overhaul of the main window - Auto-answering to calls (in 3.3.0 in fact) - Add a new page in assistant with an introduction to accounts - Unregister accounts when quitting - Speed up startup by not getting canonical name of servers - Partial support of H.239 - Speed up registration when packets get lost - Use optimised flags for H.264 video decoder - Limit history book to 100 entries, fixing some crashes - Improvements to the still experimental loudmouth plugin - Fix chat messages are received several times if several network interfaces - Set presence to offline upon quitting - Blacklist NSE, fixing registration with some registrars, such as Eutelia - Canonise address introduced when adding/editing a contact in roster - Use gnome icons instead of ekiga's own - Some fixes on online/offline presence - Disable IPv6 by default, which caused some problems (will be enabled later) - Fix a race condition in PulseAudio plugin ** Protocol fixes - Fixes for Contact field during registration: - Use two additional compatibility mode for some bogus registrars - Fix order of items in Contact field - Fix presence with asterisk - Fixes on INVITE packets in some corner cases - Fix own presence stopping to be sent after some time - Fix loading of codecs without an encoding name, e.g. MS-IMA-ADPCM - Use SIP OPTIONS to refresh NAT bindings - Numerous other fixes, especially on H264 support ** Windows port fixes - Fix crash when using gdb - Support mingw-w64 and its own headers for building - Reduce startup time (explicitly precise plugin directory) - Other miscellaneous improvements on building ** Build fixes - Add arm-linux-gnueabihf (armhf) and GNU/Hurd support - Support current libav/ffmpeg libraries - Fix compile errors with gcc 4.7 - Fix boost detection on some 64 bit machines - Support new API of Evolution-Data-Server 3.5.3 too - Fix error when linking with -Wl,--as-needed ** Translation updates ... Check http://git.gnome.org/browse/ekiga/plain/NEWS to see the changes to ekiga 3.2.7, I will write them a bit later. -- Eugen From dave.koelmeyer at davekoelmeyer.co.nz Tue Aug 21 07:46:59 2012 From: dave.koelmeyer at davekoelmeyer.co.nz (Dave Koelmeyer) Date: Tue, 21 Aug 2012 19:46:59 +1200 Subject: [Ekiga-list] Beta release In-Reply-To: <50325BD7.5000408@pu-pm.univ-fcomte.fr> References: <50325BD7.5000408@pu-pm.univ-fcomte.fr> Message-ID: <50333CF3.2060503@davekoelmeyer.co.nz> On 21/08/12 03:46 AM, Eugen Dedu wrote: > For your information, ekiga team agreed to do a beta release in two > days. The new stable release should appear next month. Feel free to > test it, I consider it overall (much) better than last stable release, > 3.2.7. That's an incredibly good-looking list of changes - can't wait to give this a spin. Cheers, -- Dave Koelmeyer http://www.davekoelmeyer.co.nz From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Aug 23 21:55:53 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 23 Aug 2012 23:55:53 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.9.90 [UNSTABLE] available Message-ID: <5036A6E9.3030205@pu-pm.univ-fcomte.fr> Hello everyone, This is the beta release of the upcoming 4.0.0 version of Ekiga. It is an important release, which has an overhaul of the main window, reduces startup time in some cases, supports latest ffmpeg/libav for H.263, H.264 and MPEG4 video codecs and fixes many other issues (but no security fix) since the previous unstable release 3.3.2 (released exactly one year before!!) One regression is known: editing account settings might crash ekiga. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: http://ftp.gnome.org/pub/gnome/sources/ekiga/3.9/ Required librairies can be found at: http://ftp.gnome.org/pub/gnome/sources/opal/3.10/ http://ftp.gnome.org/pub/gnome/sources/ptlib/2.10/ Install executable for Windows OS: http://ftp.gnome.org/pub/gnome/binaries/win32/ekiga/3.9/ * What's changed ? ================== * Changes in ekiga 3.9.90 (2012-08-23) ** Major user-visible fixes - Major overhaul of the main window - Add a new page in assistant with an introduction to accounts - Unregister accounts when quitting - Auto-answering to calls (in 3.3.0 in fact) - Faster startup by not getting canonical name of servers - Partial support of H.239 - Speed up registration when packets get lost - Use optimised flags for H.264 video decoder - Limit history book to 100 entries, fixing some crashes - Improvements to the still experimental loudmouth plugin - Fix chat messages are received several times if several network interfaces - Set presence to offline upon quitting - Blacklist NSE, fixing registration with some registrars, such as Eutelia - Canonise address introduced when adding/editing a contact in roster - Use gnome icons instead of ekiga's own - Some fixes on online/offline presence - Disable IPv6 by default, which caused some problems (will be enabled later) - Fix a race condition in PulseAudio plugin - Initial support for handling multiple video streams (H.239) ** Protocol fixes - Fixes for Contact field during registration: - Use two additional compatibility mode for some bogus registrars - Fix order of items in Contact field - Fix presence with asterisk - Fixes on INVITE packets in some corner cases - Fix own presence stopping to be sent after some time - Fix loading of codecs without an encoding name, e.g. MS-IMA-ADPCM - Use SIP OPTIONS to refresh NAT bindings - Numerous other fixes, especially on H264 support ** Distributor-visible changes - Disable IPv6 by default, which caused some problems (will be enabled later) ** Windows port fixes - Fix crash when using gdb - Support mingw-w64 and its own headers for building - Reduce startup time (explicitly precise plugin directory) - Other miscellaneous improvements on building ** Build fixes - Add arm-linux-gnueabihf (armhf) and GNU/Hurd support - Support current libav/ffmpeg libraries - Fix compile errors with gcc 4.7 - Fix boost detection on some 64 bit machines - Support new API of Evolution-Data-Server 3.5.3 too - Fix error when linking with -Wl,--as-needed ** Translation updates - Updated translations: cs, de, el, eo, es, fr, gl, gu, he, hu, id, ja, lt, lv, pl, sl, sr, sr at latin, vi - Updated help translations: es On behalf of Ekiga/ptlib/opal teams, Eugen Dedu From sevmek at free.fr Thu Aug 23 23:40:34 2012 From: sevmek at free.fr (Yannick) Date: Fri, 24 Aug 2012 01:40:34 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.9.90 [UNSTABLE] available In-Reply-To: <5036A6E9.3030205@pu-pm.univ-fcomte.fr> References: <5036A6E9.3030205@pu-pm.univ-fcomte.fr> Message-ID: <1345765234.3161.1.camel@athena.fbx.proxad.net> The announcement is now visible on http://ekiga.org/ Regards, Yannick From Junkiefun at yandex.ru Fri Aug 24 10:35:18 2012 From: Junkiefun at yandex.ru (=?koi8-r?B?7c/Ty9fJ1MnOIPfMwcTJ08zB1w==?=) Date: Fri, 24 Aug 2012 14:35:18 +0400 Subject: [Ekiga-list] (no subject) Message-ID: <736891345804518@web18h.yandex.ru> iuyu7ytr From anto.trande at gmail.com Fri Aug 24 10:48:47 2012 From: anto.trande at gmail.com (Antonio Trande) Date: Fri, 24 Aug 2012 12:48:47 +0200 Subject: [Ekiga-list] Compiling opal-3.10.7 on Fedora 17 64bit Message-ID: Hi all. I'm working to compile opal-3.10.7 on my Fedora 17 64bit. After *./configure --disable-silk*, *make* fails with [CC] h263-1998.cxx > In file included from /usr/include/ffmpeg/libavutil/samplefmt.h:22:0, > from /usr/include/ffmpeg/libavcodec/avcodec.h:30, > from ../common/ffmpeg.h:48, > from h263-1998.h:52, > from h263-1998.cxx:50: > /usr/include/ffmpeg/libavutil/avutil.h:305:5: error: expected identifier > before numeric constant > /usr/include/ffmpeg/libavutil/avutil.h:305:5: error: expected ?}? before > numeric constant > /usr/include/ffmpeg/libavutil/avutil.h:305:5: error: expected > unqualified-id before numeric constant > /usr/include/ffmpeg/libavutil/avutil.h:313:1: error: expected declaration > before ?}? token > make[3]: *** > [/home/sagitter/SoftwareCompilato/opal-3.10.7/plugins/../lib_linux_x86_64/plugins/h263_ffmpeg/h263-1998.o] > Error 1 > make[3]: Leaving directory > `/home/sagitter/SoftwareCompilato/opal-3.10.7/plugins/video/H.263-1998' > make[2]: *** [all] Error 2 > make[2]: Leaving directory > `/home/sagitter/SoftwareCompilato/opal-3.10.7/plugins' > make[1]: *** [subdirs] Error 2 > make[1]: Leaving directory `/home/sagitter/SoftwareCompilato/opal-3.10.7' > make: *** [opt] Error 2 What can i do ? Regards. -- *Antonio Trande * * **mail*: mailto:sagitter at fedoraproject.org *Homepage*: http://www.fedora-os.org *Sip Address* : sip:sagitter AT ekiga.net *Jabber * :sagitter AT jabber.org *GPG Key: 19E6DF27* -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- $ ./configure --disable-silk checking for pkg-config... /bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for a BSD-compatible install... /bin/install -c checking for ranlib... ranlib checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for ar... ar configure: gcc version is 4.7.0 checking if gcc version is valid... yes checking for working bit scan intrinsic... no configure: Opal version is 3.10.7 checking for PTLIB... yes checking linkable PTLib... release, static Version: 2.10.2 CFLAGS: -DP_64BIT -DPTRACING=1 -D_REENTRANT -D_GNU_SOURCE=1 -fno-exceptions -I/usr/include/SDL CXXFLAGS: -felide-constructors -Wreorder DEBUG: -Wl,-z,relro -lpt_d_s -lrt -lsasl2 -lldap -llber -lldap_r -lssl -lcrypto -lexpat -lSDL -lpthread -lresolv -ldl RELEASE: -Wl,-z,relro -lpt_s -lrt -lsasl2 -lldap -llber -lldap_r -lssl -lcrypto -lexpat -lSDL -lpthread -lresolv -ldl checking where plugins are being installed... linux /usr/local/lib/opal-3.10.7 checking if debug build accepts -g3 -ggdb -O0... yes checking ptlib version... 2.10.2 checking PTLIB has URL... yes checking PTLIB has STUN... yes checking PTLIB has SSL... yes checking PTLIB has ASN.1... yes checking PTLIB has expat... yes checking PTLIB has video... yes checking PTLIB has wavfile... yes checking PTLIB has vxml... yes checking PTLIB has ipv6... no checking PTLIB has dtmf... yes checking PTLIB has ldap... yes checking PTLIB has dns... yes checking PTLIB has audio... yes checking PTLIB has config... yes checking PTLIB has option ssl/aes... yes checking how to run the C++ preprocessor... g++ -E checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking if dlopen is available... yes checking for dlopen in -ldl... yes checking size of short... 2 checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking for SPEEXDSP... yes checking speex/speex.h usability... yes checking speex/speex.h presence... yes checking for speex/speex.h... yes checking for speex/speex.h... (cached) yes checking Speex has float... no checking ZRTP protocol support... no checking libsrtp support... no checking capi20.h usability... no checking capi20.h presence... no checking for capi20.h... no checking for swig... /bin/swig checking jni.h usability... no checking jni.h presence... no checking for jni.h... no checking for ruby... yes checking ruby.h usability... no checking ruby.h presence... no checking for ruby.h... no checking whether to enable video codec support... yes checking whether to enable SIP protocol support... yes checking whether to enable H.323 protocol support... yes checking PTLIB has ASN... yes checking whether to enable IAX2 protocol support... yes checking whether to enable H.224 protocol support... yes checking whether to enable H.281 (Far End Camera Control) protocol support... yes checking whether to enable T.38 capability support... yes checking whether to enable MSRP support... yes checking whether to enable SIPIM session support... yes checking whether to enable RFC4103 support... yes checking whether to enable T.38 FAX protocol support... yes checking whether to enable H.450... yes checking whether to enable H.460... yes checking whether to enable H.239... yes checking whether to enable H.501... yes checking whether to enable T.120... no checking whether to enable LID support... yes checking whether to enable IVR support... yes checking whether to enable RFC4175 support... yes checking whether to enable RFC2435 support (experimental)... no checking whether to enable accoustic echo cancellation support... yes checking whether to enable Packet Loss Concealment for G.711... yes checking whether to enable RTCP Extended Reports support... yes checking whether to enable statistics gathering support... yes checking whether to enable media mixing support... yes checking whether to enable PC sound system support... yes checking whether to enable plugin support... yes checking whether to enable samples build... no configure: creating ./config.status config.status: creating opal_defs.mak config.status: creating Makefile config.status: creating opal.pc config.status: creating opal.spec config.status: creating opal_cfg.dxy config.status: creating src/codec/speex/libspeex/speex_config_types.h config.status: creating include/opal/buildopts.h config.status: include/opal/buildopts.h is unchanged === configuring in plugins (/home/sagitter/SoftwareCompilato/opal-3.10.7/plugins) configure: running /bin/sh ./configure --disable-option-checking '--prefix=/usr/local' '--disable-silk' --cache-file=/dev/null --srcdir=. PTLIB_REC_VERSION 2.10.1 checking for pkg-config... /bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for g++... g++ checking whether the C++ compiler works... yes checking for C++ compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for PTLIB... yes checking linkable PTLib... release, static Version: 2.10.2 CFLAGS: -DP_64BIT -DPTRACING=1 -D_REENTRANT -D_GNU_SOURCE=1 -fno-exceptions -I/usr/include/SDL CXXFLAGS: -felide-constructors -Wreorder DEBUG: -Wl,-z,relro -lpt_d_s -lrt -lsasl2 -lldap -llber -lldap_r -lssl -lcrypto -lexpat -lSDL -lpthread -lresolv -ldl RELEASE: -Wl,-z,relro -lpt_s -lrt -lsasl2 -lldap -llber -lldap_r -lssl -lcrypto -lexpat -lSDL -lpthread -lresolv -ldl checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking for gcc... gcc checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for a BSD-compatible install... /bin/install -c checking for ranlib... ranlib checking for nm... nm checking for ldd... ldd checking for objdump... objdump checking how to run the C++ preprocessor... g++ -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking stddef.h usability... yes checking stddef.h presence... yes checking for stddef.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking float.h usability... yes checking float.h presence... yes checking for float.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking OPAL Version... 3.10.7 checking Plugin install directory... /usr/local/lib/opal-3.10.7 checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking if dlopen is available... yes checking for dlopen in -ldl... yes checking if linker accepts -Wl,--no-as-needed... yes checking for gsm_create in -lgsm... yes checking if system GSM library has WAV49... yes checking System GSM... yes using system GSM checking how to run the C preprocessor... gcc -E configure: checking if iLBC is installed checking for iLBC_encode in -lilbc... no checking System iLBC... no configure: creating ./config.status config.status: creating audio/GSM0610/Makefile config.status: creating audio/gsm-amr/Makefile config.status: creating audio/iLBC/Makefile config.status: creating audio/Speex/libspeex/speex_config_types.h checking size of short... 2 checking size of int... 4 checking size of long... 8 checking size of long long... 8 checking internal Speex version... 1.1.11.1 configure: checking whether system Speex or internal Speex is more recent checking for SPEEX... yes using system Speex version 1.2rc1 checking for CELT... no checking default to full capabilities at empty fmtp lines... yes checking for LIBAVCODEC... yes checking filename of libavcodec library... libavcodec.so.53 configure: libavcodec stack align hack disabled checking libavcodec source... disabled checking for LIBAVUTIL... yes checking filename of libavutil library... libavutil.so.51 checking if libavcodec has rtp_mode... no checking if libavutil has AV_PICTURE_TYPE_NONE... no checking if libavutil has AVPictureType... no checking for X264... no checking for THEORA... no checking IXJ... no checking enable voicetronix vpb... no checking for fax_free in -lspandsp... yes checking for t38_core_get_logging_state in -lspandsp... yes checking for spandsp.h... yes checking for t38_set_fastest_image_data_rate in -lspandsp... yes checking for posix_memalign... yes configure: creating ./config.status config.status: creating audio/GSM0610/Makefile config.status: creating audio/gsm-amr/Makefile config.status: creating audio/iLBC/Makefile config.status: creating audio/Speex/libspeex/speex_config_types.h config.status: creating audio/Speex/Makefile config.status: creating audio/G722/Makefile config.status: creating audio/G.722.1/Makefile config.status: creating audio/G.722.2/Makefile config.status: creating audio/G726/Makefile config.status: creating audio/LPC_10/Makefile config.status: creating audio/IMA_ADPCM/Makefile config.status: creating video/H.261-vic/Makefile config.status: creating video/H.263-1998/Makefile config.status: creating video/MPEG4-ffmpeg/Makefile config.status: creating fax/fax_spandsp/Makefile config.status: creating Makefile config.status: creating plugin-inc.mak config.status: creating plugin-config.h config.status: plugin-config.h is unchanged =================== Plugin configuration ====================== prefix : /usr/local exec_prefix : ${prefix} libdir : ${exec_prefix}/lib Audio Codec plugin install dir : ${libdir}/opal-3.10.7/codecs/audio Video Codec plugin install prefix: ${libdir}/opal-3.10.7/codecs/video LID plugin install prefix : ${libdir}/opal-3.10.7/lid FAX plugin install prefix : ${libdir}/opal-3.10.7/fax GSM : yes (system) GSM-AMR : yes iLBC : yes (internal) Speex : yes (system, version 1.2rc1) G.722 : yes G.722.1 : yes G.722.2 : yes G.726 : yes LPC10 : yes IMA_ADPCM : yes SBC : no CELT : no SILK : no H.261 : yes (vic) H.263/H.263+ : yes (ffmpeg) H.264 : no THEORA : no MPEG4 Part 2 : yes (no rate control correction) SpanDSP FAX : yes Quicknet xJACK support : no Voicetronics VPB support : no OS Type : linux-gnu Machine Type : x86_64 If all settings are OK, type make and make install ======================================================== From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Aug 24 10:57:32 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 24 Aug 2012 12:57:32 +0200 Subject: [Ekiga-list] Compiling opal-3.10.7 on Fedora 17 64bit In-Reply-To: References: Message-ID: <50375E1C.7050001@pu-pm.univ-fcomte.fr> On 24/08/12 12:48, Antonio Trande wrote: > Hi all. > > I'm working to compile opal-3.10.7 on my Fedora 17 64bit. After *./configure > --disable-silk*, *make* fails with > > [CC] h263-1998.cxx >> In file included from /usr/include/ffmpeg/libavutil/samplefmt.h:22:0, >> from /usr/include/ffmpeg/libavcodec/avcodec.h:30, >> from ../common/ffmpeg.h:48, >> from h263-1998.h:52, >> from h263-1998.cxx:50: >> /usr/include/ffmpeg/libavutil/avutil.h:305:5: error: expected identifier >> before numeric constant >> /usr/include/ffmpeg/libavutil/avutil.h:305:5: error: expected ?}? before >> numeric constant >> /usr/include/ffmpeg/libavutil/avutil.h:305:5: error: expected >> unqualified-id before numeric constant >> /usr/include/ffmpeg/libavutil/avutil.h:313:1: error: expected declaration >> before ?}? token >> make[3]: *** >> [/home/sagitter/SoftwareCompilato/opal-3.10.7/plugins/../lib_linux_x86_64/plugins/h263_ffmpeg/h263-1998.o] >> Error 1 Peter, do you know what is the problem? I tested it with libav... -- Eugen From anto.trande at gmail.com Fri Aug 24 12:08:55 2012 From: anto.trande at gmail.com (Antonio Trande) Date: Fri, 24 Aug 2012 14:08:55 +0200 Subject: [Ekiga-list] Compiling opal-3.10.7 on Fedora 17 64bit In-Reply-To: <50375E1C.7050001@pu-pm.univ-fcomte.fr> References: <50375E1C.7050001@pu-pm.univ-fcomte.fr> Message-ID: 2012/8/24 Eugen Dedu > On 24/08/12 12:48, Antonio Trande wrote: > >> Hi all. >> >> I'm working to compile opal-3.10.7 on my Fedora 17 64bit. After >> *./configure >> --disable-silk*, *make* fails with >> >> >> [CC] h263-1998.cxx >> >>> In file included from /usr/include/ffmpeg/libavutil/**samplefmt.h:22:0, >>> from /usr/include/ffmpeg/**libavcodec/avcodec.h:30, >>> from ../common/ffmpeg.h:48, >>> from h263-1998.h:52, >>> from h263-1998.cxx:50: >>> /usr/include/ffmpeg/libavutil/**avutil.h:305:5: error: expected >>> identifier >>> before numeric constant >>> /usr/include/ffmpeg/libavutil/**avutil.h:305:5: error: expected ?}? >>> before >>> numeric constant >>> /usr/include/ffmpeg/libavutil/**avutil.h:305:5: error: expected >>> unqualified-id before numeric constant >>> /usr/include/ffmpeg/libavutil/**avutil.h:313:1: error: expected >>> declaration >>> before ?}? token >>> make[3]: *** >>> [/home/sagitter/**SoftwareCompilato/opal-3.10.7/** >>> plugins/../lib_linux_x86_64/**plugins/h263_ffmpeg/h263-1998.**o] >>> Error 1 >>> >> > Peter, do you know what is the problem? I tested it with libav... > > -- > Eugen > ______________________________**_________________ > ekiga-list mailing list > ekiga-list at gnome.org > https://mail.gnome.org/**mailman/listinfo/ekiga-list With the option *--disable-libavcodec, *make completes its work but ffmpeg codecs are not available. If i remember properly this issue pops up with the old release of Ekiga too and it was linked to ffmpeg. prefix : /usr/local exec_prefix : ${prefix} libdir : ${exec_prefix}/lib Audio Codec plugin install dir : ${libdir}/opal-3.10.7/codecs/audio Video Codec plugin install prefix: ${libdir}/opal-3.10.7/codecs/video LID plugin install prefix : ${libdir}/opal-3.10.7/lid FAX plugin install prefix : ${libdir}/opal-3.10.7/fax GSM : yes (system) GSM-AMR : yes iLBC : yes (internal) Speex : yes (system, version 1.2rc1) G.722 : yes G.722.1 : yes G.722.2 : yes G.726 : yes LPC10 : yes IMA_ADPCM : yes SBC : no CELT : no SILK : yes H.261 : yes (vic) H.263/H.263+ : no (ffmpeg) H.264 : no THEORA : no MPEG4 Part 2 : no SpanDSP FAX : yes Quicknet xJACK support : no Voicetronics VPB support : no OS Type : linux-gnu Machine Type : x86_64 If all settings are OK, type make and make install -- *Antonio Trande "Fedora Ambassador"* *"Fedora italian translation group"* *"Blogger" **mail*: mailto:sagitter at fedoraproject.org *Homepage*: http://www.fedora-os.org *Sip Address* : sip:sagitter AT ekiga.net *Jabber * :sagitter AT jabber.org *GPG Key: 19E6DF27* -------------- next part -------------- An HTML attachment was scrubbed... URL: From dave at dawoodfall.net Sat Aug 25 19:37:22 2012 From: dave at dawoodfall.net (David Woodfall) Date: Sat, 25 Aug 2012 20:37:22 +0100 Subject: [Ekiga-list] Installing Ekiga-3.9.90 Icons Missing For DialPad and Contacts Message-ID: <20120825193722.GA21121@Junius> Hi, I've just installed ekiga 3.9.90 and notice that these two icons are missing from the icon bar. The make line I am using: make pixmaps install Any ideas? From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Aug 25 19:47:57 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 25 Aug 2012 21:47:57 +0200 Subject: [Ekiga-list] Installing Ekiga-3.9.90 Icons Missing For DialPad and Contacts In-Reply-To: <20120825193722.GA21121@Junius> References: <20120825193722.GA21121@Junius> Message-ID: <50392BED.7070008@pu-pm.univ-fcomte.fr> On 25/08/12 21:37, David Woodfall wrote: > Hi, I've just installed ekiga 3.9.90 and notice that these two icons > are missing from the icon bar. > > The make line I am using: > > make pixmaps install On Windows or on Linux? Which Linux? -- Eugen From dave at dawoodfall.net Sun Aug 26 00:51:05 2012 From: dave at dawoodfall.net (David Woodfall) Date: Sun, 26 Aug 2012 01:51:05 +0100 Subject: [Ekiga-list] Installing Ekiga-3.9.90 Icons Missing For DialPad and Contacts In-Reply-To: <50392BED.7070008@pu-pm.univ-fcomte.fr> References: <20120825193722.GA21121@Junius> <50392BED.7070008@pu-pm.univ-fcomte.fr> Message-ID: <20120826005105.GA8841@Junius> On (21:47 25/08/12), Eugen Dedu put forth the proposition: >On 25/08/12 21:37, David Woodfall wrote: >>Hi, I've just installed ekiga 3.9.90 and notice that these two icons >>are missing from the icon bar. >> >>The make line I am using: >> >>make pixmaps install > >On Windows or on Linux? Which Linux? Slackware Linux. It seems that icons are really down to the gtk icon theme? I have been using LaGaDesk-BlackWhite-II, so it looks like I need a theme with a fuller set of icons? D. From Eugen.Dedu at pu-pm.univ-fcomte.fr Sun Aug 26 02:00:07 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sun, 26 Aug 2012 04:00:07 +0200 Subject: [Ekiga-list] Installing Ekiga-3.9.90 Icons Missing For DialPad and Contacts In-Reply-To: <20120826005105.GA8841@Junius> References: <20120825193722.GA21121@Junius> <50392BED.7070008@pu-pm.univ-fcomte.fr> <20120826005105.GA8841@Junius> Message-ID: <50398327.2020903@pu-pm.univ-fcomte.fr> On 26/08/12 02:51, David Woodfall wrote: > On (21:47 25/08/12), Eugen Dedu put > forth the proposition: >> On 25/08/12 21:37, David Woodfall wrote: >>> Hi, I've just installed ekiga 3.9.90 and notice that these two icons >>> are missing from the icon bar. >>> >>> The make line I am using: >>> >>> make pixmaps install >> >> On Windows or on Linux? Which Linux? > > Slackware Linux. > > It seems that icons are really down to the gtk icon theme? I have been > using LaGaDesk-BlackWhite-II, so it looks like I need a theme with a > fuller set of icons? Yes. I use gnome-icon-theme package, what is the name of this package in your distribution? I is mandatory in this version, since it provides some icons. I have to add it as dependency, but I do not know exactly yet how. -- Eugen From dave at dawoodfall.net Sun Aug 26 03:06:58 2012 From: dave at dawoodfall.net (David Woodfall) Date: Sun, 26 Aug 2012 04:06:58 +0100 Subject: [Ekiga-list] Installing Ekiga-3.9.90 Icons Missing For DialPad and Contacts In-Reply-To: <50398327.2020903@pu-pm.univ-fcomte.fr> References: <20120825193722.GA21121@Junius> <50392BED.7070008@pu-pm.univ-fcomte.fr> <20120826005105.GA8841@Junius> <50398327.2020903@pu-pm.univ-fcomte.fr> Message-ID: <20120826030658.GA27229@Junius> On (04:00 26/08/12), Eugen Dedu put forth the proposition: >On 26/08/12 02:51, David Woodfall wrote: >>On (21:47 25/08/12), Eugen Dedu put >>forth the proposition: >>>On 25/08/12 21:37, David Woodfall wrote: >>>>Hi, I've just installed ekiga 3.9.90 and notice that these two icons >>>>are missing from the icon bar. >>>> >>>>The make line I am using: >>>> >>>>make pixmaps install >>> >>>On Windows or on Linux? Which Linux? >> >>Slackware Linux. >> >>It seems that icons are really down to the gtk icon theme? I have been >>using LaGaDesk-BlackWhite-II, so it looks like I need a theme with a >>fuller set of icons? > >Yes. I use gnome-icon-theme package, what is the name of this >package in your distribution? I is mandatory in this version, since >it provides some icons. I have to add it as dependency, but I do not >know exactly yet how. It's the same name in Slackware. I think it needs specifying in gtkrc-2.0. It doesn't seem to pick up on it if no icon theme is set manually. From anto.trande at gmail.com Mon Aug 27 17:45:36 2012 From: anto.trande at gmail.com (Antonio Trande) Date: Mon, 27 Aug 2012 19:45:36 +0200 Subject: [Ekiga-list] Compiling opal-3.10.7 on Fedora 17 64bit In-Reply-To: References: <50375E1C.7050001@pu-pm.univ-fcomte.fr> Message-ID: 2012/8/24 Antonio Trande > 2012/8/24 Eugen Dedu > >> On 24/08/12 12:48, Antonio Trande wrote: >> >>> Hi all. >>> >>> I'm working to compile opal-3.10.7 on my Fedora 17 64bit. After >>> *./configure >>> --disable-silk*, *make* fails with >>> >>> >>> [CC] h263-1998.cxx >>> >>>> In file included from /usr/include/ffmpeg/libavutil/**samplefmt.h:22:0, >>>> from /usr/include/ffmpeg/**libavcodec/avcodec.h:30, >>>> from ../common/ffmpeg.h:48, >>>> from h263-1998.h:52, >>>> from h263-1998.cxx:50: >>>> /usr/include/ffmpeg/libavutil/**avutil.h:305:5: error: expected >>>> identifier >>>> before numeric constant >>>> /usr/include/ffmpeg/libavutil/**avutil.h:305:5: error: expected ?}? >>>> before >>>> numeric constant >>>> /usr/include/ffmpeg/libavutil/**avutil.h:305:5: error: expected >>>> unqualified-id before numeric constant >>>> /usr/include/ffmpeg/libavutil/**avutil.h:313:1: error: expected >>>> declaration >>>> before ?}? token >>>> make[3]: *** >>>> [/home/sagitter/**SoftwareCompilato/opal-3.10.7/** >>>> plugins/../lib_linux_x86_64/**plugins/h263_ffmpeg/h263-1998.**o] >>>> Error 1 >>>> >>> >> Peter, do you know what is the problem? I tested it with libav... >> >> -- >> Eugen >> ______________________________**_________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> https://mail.gnome.org/**mailman/listinfo/ekiga-list > > > With the option *--disable-libavcodec, *make completes its work but > ffmpeg codecs are not available. > If i remember properly this issue pops up with the old release of Ekiga > too and it was linked to ffmpeg. > > prefix : /usr/local > exec_prefix : ${prefix} > libdir : ${exec_prefix}/lib > Audio Codec plugin install dir : ${libdir}/opal-3.10.7/codecs/audio > Video Codec plugin install prefix: ${libdir}/opal-3.10.7/codecs/video > LID plugin install prefix : ${libdir}/opal-3.10.7/lid > FAX plugin install prefix : ${libdir}/opal-3.10.7/fax > > GSM : yes (system) > GSM-AMR : yes > iLBC : yes (internal) > Speex : yes (system, version 1.2rc1) > G.722 : yes > G.722.1 : yes > G.722.2 : yes > G.726 : yes > LPC10 : yes > IMA_ADPCM : yes > SBC : no > CELT : no > SILK : yes > > H.261 : yes (vic) > H.263/H.263+ : no (ffmpeg) > H.264 : no > THEORA : no > MPEG4 Part 2 : no > > SpanDSP FAX : yes > > Quicknet xJACK support : no > Voicetronics VPB support : no > > OS Type : linux-gnu > Machine Type : x86_64 > > If all settings are OK, type make and make install > Please, i wish understand if this is a issue related to Ekiga or to ffmpeg in Fedora. -- *Antonio Trande "Fedora Ambassador"* *"Fedora italian translation group"* *"Blogger" **mail*: mailto:sagitter at fedoraproject.org *Homepage*: http://www.fedora-os.org *Sip Address* : sip:sagitter AT ekiga.net *Jabber * :sagitter AT jabber.org *GPG Key: 19E6DF27* -------------- next part -------------- An HTML attachment was scrubbed... URL: