From gio_6b at yahoo.it Thu Jun 2 21:13:13 2011 From: gio_6b at yahoo.it (Giorgio) Date: Thu, 02 Jun 2011 23:13:13 +0200 Subject: [Ekiga-list] Missing library in Mandriva In-Reply-To: <4DE52E04.9070604@laposte.net> References: <4DE4AF54.1000607@laposte.net> <4DE4DA6F.8000807@laposte.net> <4DE4F56A.4020300@pu-pm.univ-fcomte.fr> <4DE4FD8F.9010204@laposte.net> <4DE51EF4.50807@yahoo.it> <4DE52E04.9070604@laposte.net> Message-ID: <4DE7FCE9.6030305@yahoo.it> Thanks for information. My Mandriva isn't so customized nevertheless Ekiga don't works. Probably I'll wait for 2011 coming in july to see if something has improved. Il 31/05/2011 20:05, geo cherchetout ha scritto: > Le 31/05/2011 19:01, *Giorgio* wrote : >> to geo cherchetout >> >> I'm using Mandriva 2010.2 64 bit, your is 32 or 64 bit ? > Mine is 32 bits. > >> I've tried Ekiga 3.2.6 from repositories with no luck. Echo isn't working. > I had also many problems like this one with 3.2.6 and was hopping 3.2.7 > resolve them. > >> I'm interested in 3.2.7 because I hope it can solve my audio problems. >> Please let me know how 3.2.7 works in your Mandriva. > For me it's not better than 3.2.6 but I can't blame Ekiga because my > Mandriva 2010.2 is very "customized" and also my router. I suspect also a > bug in gconf-editor because some changes in ekiga configuration seems not > always taken in account... > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From geo.cherchetout at laposte.net Sat Jun 4 12:27:18 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 14:27:18 +0200 Subject: [Ekiga-list] Compatibility question Message-ID: <4DEA24A6.20502@laposte.net> Hello, To day, following links given in this page at the "stable" line: http://wiki.ekiga.org/index.php/Download_Ekiga_sources I installed from tarballs ptlib-2.6.7, opal-3.6.8 and ekiga-3.2.7. Then I try to launch ekiga : $ LD_LIBRARY_PATH=/usr/local/lib /usr/local/bin/ekiga /usr/local/bin/ekiga: error while loading shared libraries: libopal.so.3.6-beta9: cannot open shared object file: No such file or directory Ekiga-3.2.7 asks for libopal.so.3.6-beta9 but the library provided by opal-3.2.7 is libopal.so.3.6.8. In the same way, Ekiga-3.2.7 asks for libpt.so.2.6-beta8 but the library provided by ptlib-2.6.7 is libpt.so.2.6.7. Is this an error to suppose that these 3 recommended "stable tarballs" would be compatible with each other ? From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jun 4 12:33:58 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 04 Jun 2011 14:33:58 +0200 Subject: [Ekiga-list] Compatibility question In-Reply-To: <4DEA24A6.20502@laposte.net> References: <4DEA24A6.20502@laposte.net> Message-ID: <4DEA2636.2020003@pu-pm.univ-fcomte.fr> On 04/06/11 14:27, geo cherchetout wrote: > Hello, > > To day, following links given in this page at the "stable" line: > http://wiki.ekiga.org/index.php/Download_Ekiga_sources > I installed from tarballs ptlib-2.6.7, opal-3.6.8 and ekiga-3.2.7. > > Then I try to launch ekiga : > > $ LD_LIBRARY_PATH=/usr/local/lib /usr/local/bin/ekiga > /usr/local/bin/ekiga: error while loading shared libraries: > libopal.so.3.6-beta9: cannot open shared object file: No such file or directory > > Ekiga-3.2.7 asks for libopal.so.3.6-beta9 but the library provided by > opal-3.2.7 is libopal.so.3.6.8. > > In the same way, Ekiga-3.2.7 asks for libpt.so.2.6-beta8 but the library > provided by ptlib-2.6.7 is libpt.so.2.6.7. Probably you have built ptlib 2.6.7 but you have also ptlib 2.6.8 installed on your system. What ls -l /usr/lib/libpt* show? > Is this an error to suppose that these 3 recommended "stable tarballs" would > be compatible with each other ? They are compatible. -- Eugen From geo.cherchetout at laposte.net Sat Jun 4 13:38:20 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 15:38:20 +0200 Subject: [Ekiga-list] Compatibility question In-Reply-To: <4DEA2636.2020003@pu-pm.univ-fcomte.fr> References: <4DEA24A6.20502@laposte.net> <4DEA2636.2020003@pu-pm.univ-fcomte.fr> Message-ID: <4DEA354C.4090704@laposte.net> Le 04/06/2011 14:33, *Eugen Dedu* a ?crit fort ? propos : > Probably you have built ptlib 2.6.7 but you have also ptlib 2.6.8 > installed on your system. What ls -l /usr/lib/libpt* show? # ls -l /usr/lib/libpt.* lrwxrwxrwx 1 root root 16 2011-05-21 15:56 /usr/lib/libpt.so.1 -> libpt.so.1.10.10* lrwxrwxrwx 1 root root 16 2011-05-21 15:56 /usr/lib/libpt.so.1.10 -> libpt.so.1.10.10* -rwxr-xr-x 1 root root 3403520 2010-05-05 05:55 /usr/lib/libpt.so.1.10.10* -rwxr-xr-x 1 root root 3536252 2010-04-28 18:57 /usr/lib/libpt.so.2.6.5* # ls -l /usr/lib/libopal* -rwxr-xr-x 1 root root 7178972 2010-05-05 11:25 /usr/lib/libopal.so.3.6.6* (Rpms libpt2.6.5 and libpt2.6.5-plugins from Mandriva repositories are still installed, and also libopal3.6.6 and libopal3.6.6-plugins from plf repositories.) # ls -l /usr/local/lib/libpt* -r--r--r-- 1 root root 7352988 2011-06-04 11:14 /usr/local/lib/libpt_s.a lrwxrwxrwx 1 root root 14 2011-06-04 11:14 /usr/local/lib/libpt.so -> libpt.so.2.6.7 -r--r--r-- 1 root root 3214830 2011-06-04 11:14 /usr/local/lib/libpt.so.2.6.7 > They are compatible. Thank you to confirm this. :-) Before installing stable tarballs, I uninstalled svn ones (make uninstall) but several empty directories where remaining. Perhaps I didn't delete them soon enough ? Do you recommend to me to uninstall libpt and libopal rpm packages ? From geo.cherchetout at laposte.net Sat Jun 4 16:49:06 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 18:49:06 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DE550E6.2070501@laposte.net> References: <4DE550E6.2070501@laposte.net> Message-ID: <4DEA6202.1090405@laposte.net> Le 31/05/2011 22:34, I wrote: > Same problem with Ekiga 3.2.6 on another machine with the same distribution > Mandriva. And same problem with Ekiga-3.3.0... > No problem on the two machines with Linphone and Twinkle to hear > Simon's voice. > > What is wrong in my Ekiga configuration or my Mandriva ? From geo.cherchetout at laposte.net Sat Jun 4 17:03:46 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 19:03:46 +0200 Subject: [Ekiga-list] Is Ekiga robot working ? Is stun.ekiga.net working ? Message-ID: <4DEA6572.9050306@laposte.net> I know sip:500 at ekiga.net is frequently down... From davekoelmeyer at me.com Sat Jun 4 18:05:16 2011 From: davekoelmeyer at me.com (Dave Koelmeyer) Date: Sun, 05 Jun 2011 06:05:16 +1200 Subject: [Ekiga-list] Is Ekiga robot working ? Is stun.ekiga.net working ? In-Reply-To: <4DEA6572.9050306@laposte.net> References: <4DEA6572.9050306@laposte.net> Message-ID: <4DEA73DC.1060204@me.com> On 5/06/11 05:03 AM, geo cherchetout wrote: > I know sip:500 at ekiga.net is frequently down... Can't connect to the echo test service here either at the time of writing. -- Dave Koelmeyer http://davekoelmeyer.wordpress.com/ From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jun 4 18:14:28 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 04 Jun 2011 20:14:28 +0200 Subject: [Ekiga-list] Is Ekiga robot working ? Is stun.ekiga.net working ? In-Reply-To: <4DEA73DC.1060204@me.com> References: <4DEA6572.9050306@laposte.net> <4DEA73DC.1060204@me.com> Message-ID: <4DEA7604.7010004@pu-pm.univ-fcomte.fr> On 04/06/11 20:05, Dave Koelmeyer wrote: > On 5/06/11 05:03 AM, geo cherchetout wrote: >> I know sip:500 at ekiga.net is frequently down... > > Can't connect to the echo test service here either at the time of writing. Indeed. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jun 4 18:17:42 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 04 Jun 2011 20:17:42 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DE550E6.2070501@laposte.net> References: <4DE550E6.2070501@laposte.net> Message-ID: <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> On 31/05/11 22:34, geo cherchetout wrote: > Hello, > > Ekiga 3.2.7 and sipomatic are running on the same machine with Mandriva > 2010.2 32 bits distribution. > Stun is disabled. Video is disabled. I am not registered to any registrar. > Only sound codecs PCMA and PCMU are activated and not any video codec. Sound > is working. > When I call sip:robot at 127.0.0.1:5064 I only get this message after some time > at the bottom of main ekiga window: "Impossible de se connecter au > correspondant distant". > > The messages gotten in Terminal during an ekiga session with one such call > are recorded in this file: > http://www.cijoint.fr/cjlink.php?file=cj201105/cijjTlCgQC.txt > > Same problem with Ekiga 3.2.6 on another machine with the same distribution > Mandriva. No problem on the two machines with Linphone and Twinkle to hear > Simon's voice. > > What is wrong in my Ekiga configuration or my Mandriva ? Only -d 4 output (for 3.2.x or 3.3.0) can give us what happens. Have you finally solved your problem with libraries? -- Eugen From geo.cherchetout at laposte.net Sat Jun 4 18:50:38 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 20:50:38 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> References: <4DE550E6.2070501@laposte.net> <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> Message-ID: <4DEA7E7E.6030002@laposte.net> Le 04/06/2011 20:17, *Eugen Dedu* a ?crit fort ? propos : >> The messages gotten in Terminal during an ekiga session with one such call >> are recorded in this file: >> http://www.cijoint.fr/cjlink.php?file=cj201105/cijjTlCgQC.txt >> >> Same problem with Ekiga 3.2.6 on another machine with the same distribution >> Mandriva. No problem on the two machines with Linphone and Twinkle to hear >> Simon's voice. >> >> What is wrong in my Ekiga configuration or my Mandriva ? > > Only -d 4 output (for 3.2.x or 3.3.0) can give us what happens. The link above is an -d4 output. If this one is not sufficient I will make a new one with ekiga-3.3.0. And preferably send it to you by private e-mail ? > Have you finally solved your problem with libraries? Yes, all is coherent after rpms are uninstalled and old ptlib, opal and ekiga libraries deleted in /usr/local, thank you. As always, I whas the uniq one in the wrong. From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jun 4 19:05:08 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 04 Jun 2011 21:05:08 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEA7E7E.6030002@laposte.net> References: <4DE550E6.2070501@laposte.net> <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> <4DEA7E7E.6030002@laposte.net> Message-ID: <4DEA81E4.3050700@pu-pm.univ-fcomte.fr> On 04/06/11 20:50, geo cherchetout wrote: > Le 04/06/2011 20:17, *Eugen Dedu* a ?crit fort ? propos : > >>> The messages gotten in Terminal during an ekiga session with one such call >>> are recorded in this file: >>> http://www.cijoint.fr/cjlink.php?file=cj201105/cijjTlCgQC.txt >>> >>> Same problem with Ekiga 3.2.6 on another machine with the same distribution >>> Mandriva. No problem on the two machines with Linphone and Twinkle to hear >>> Simon's voice. >>> >>> What is wrong in my Ekiga configuration or my Mandriva ? >> >> Only -d 4 output (for 3.2.x or 3.3.0) can give us what happens. > > The link above is an -d4 output. If this one is not sufficient I will make a > new one with ekiga-3.3.0. And preferably send it to you by private e-mail ? Ah, the text on the Web page is not good: "pour enregistrer" -> "pour voir"... I looked for 1 min, no idea, it seems your invitation packet is not received. I will look again this evening or tomorrow. -- Eugen From geo.cherchetout at laposte.net Sat Jun 4 19:27:42 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 21:27:42 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEA81E4.3050700@pu-pm.univ-fcomte.fr> References: <4DE550E6.2070501@laposte.net> <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> <4DEA7E7E.6030002@laposte.net> <4DEA81E4.3050700@pu-pm.univ-fcomte.fr> Message-ID: <4DEA872E.8060206@laposte.net> Le 04/06/2011 21:05, *Eugen Dedu* wrote: > Ah, the text on the Web page is not good: "pour enregistrer" -> "pour > voir"... > > I looked for 1 min, no idea, it seems your invitation packet is not > received. I will look again this evening or tomorrow. OK, thank you. I have also a new -d 4 output with ekiga-3.3.0 for the case you want to see it. From geo.cherchetout at laposte.net Sat Jun 4 20:02:46 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 22:02:46 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEA81E4.3050700@pu-pm.univ-fcomte.fr> References: <4DE550E6.2070501@laposte.net> <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> <4DEA7E7E.6030002@laposte.net> <4DEA81E4.3050700@pu-pm.univ-fcomte.fr> Message-ID: <4DEA8F66.80404@laposte.net> Le 04/06/2011 21:05, *Eugen Dedu* a ?crit fort ? propos : > Ah, the text on the Web page is not good: "pour enregistrer" -> "pour > voir"... Right clic to save, left clic to see. :-) From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jun 4 20:50:26 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 04 Jun 2011 22:50:26 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEA7E7E.6030002@laposte.net> References: <4DE550E6.2070501@laposte.net> <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> <4DEA7E7E.6030002@laposte.net> Message-ID: <4DEA9A92.2080308@pu-pm.univ-fcomte.fr> On 04/06/11 20:50, geo cherchetout wrote: > Le 04/06/2011 20:17, *Eugen Dedu* a ?crit fort ? propos : > >>> The messages gotten in Terminal during an ekiga session with one such call >>> are recorded in this file: >>> http://www.cijoint.fr/cjlink.php?file=cj201105/cijjTlCgQC.txt >>> >>> Same problem with Ekiga 3.2.6 on another machine with the same distribution >>> Mandriva. No problem on the two machines with Linphone and Twinkle to hear >>> Simon's voice. >>> >>> What is wrong in my Ekiga configuration or my Mandriva ? >> >> Only -d 4 output (for 3.2.x or 3.3.0) can give us what happens. > > The link above is an -d4 output. If this one is not sufficient I will make a > new one with ekiga-3.3.0. And preferably send it to you by private e-mail ? The problem is that you are not registered. Shouldn't you have an account and register before calling someone? Do not you do it for the other SIP software? -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jun 4 20:51:02 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 04 Jun 2011 22:51:02 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEA8F66.80404@laposte.net> References: <4DE550E6.2070501@laposte.net> <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> <4DEA7E7E.6030002@laposte.net> <4DEA81E4.3050700@pu-pm.univ-fcomte.fr> <4DEA8F66.80404@laposte.net> Message-ID: <4DEA9AB6.7080208@pu-pm.univ-fcomte.fr> On 04/06/11 22:02, geo cherchetout wrote: > Le 04/06/2011 21:05, *Eugen Dedu* a ?crit fort ? propos : > >> Ah, the text on the Web page is not good: "pour enregistrer" -> "pour >> voir"... > > Right clic to save, left clic to see. :-) I thought that save is for save to the site (upload)... -- Eugen From geo.cherchetout at laposte.net Sat Jun 4 21:26:00 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 23:26:00 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEA9A92.2080308@pu-pm.univ-fcomte.fr> References: <4DE550E6.2070501@laposte.net> <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> <4DEA7E7E.6030002@laposte.net> <4DEA9A92.2080308@pu-pm.univ-fcomte.fr> Message-ID: <4DEAA2E8.8000108@laposte.net> Le 04/06/2011 22:50, *Eugen Dedu* a ?crit fort ? propos : > The problem is that you are not registered. Shouldn't you have an > account and register before calling someone? I have several account : Ekiga, Wengo, Terrasip, Linphone. But to send a call to localhost I didn't think I have to register anywhere. > Do not you do it for the other SIP software? With Linphone, I hear Simon's voice without (or with) being registered anywhere. Same thing with Twinkle. With Ekiga 3.3.0 I can't register this evening to ekiga's registrar (perhaps because stun is actually disabled) but I can register to Linphone's one. Then I don't hear Simon's voice. After 20/30 seconds I get the message : "Votre correspondant n'est pas connect?" (Your remote correspondent is not connected.) Exactly the same scenario as when I am not registered. Sipomatic is running on the same computer than softphones. From geo.cherchetout at laposte.net Sat Jun 4 21:41:25 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Sat, 04 Jun 2011 23:41:25 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEAA2E8.8000108@laposte.net> References: <4DE550E6.2070501@laposte.net> <4DEA76C6.5010609@pu-pm.univ-fcomte.fr> <4DEA7E7E.6030002@laposte.net> <4DEA9A92.2080308@pu-pm.univ-fcomte.fr> <4DEAA2E8.8000108@laposte.net> Message-ID: <4DEAA685.3080502@laposte.net> Le 04/06/2011 23:26, I wrote: > With Ekiga 3.3.0 I can't register this evening to ekiga's registrar (perhaps > because stun is actually disabled) but I can register to Linphone's one. > Then I don't hear Simon's voice. After 20/30 seconds I get the message : > "Votre correspondant n'est pas connect?" (Your remote correspondent is not > connected.) Exactly the same scenario as when I am not registered. Now I have enabled stun and registered to Linphone, Wengo and Terrasip's registrars. I can't register to Ekiga's one. Nothing is changed when calling local Sipomatic or 500 at ekiga.net or wengo's echo. The only echo I get is Terrasip's one. (A low price provider.) > Sipomatic is running on the same computer than softphones. From gandalfinium at yahoo.fr Sun Jun 5 10:31:54 2011 From: gandalfinium at yahoo.fr (Gandalfinium Le blanc) Date: Sun, 5 Jun 2011 11:31:54 +0100 (BST) Subject: [Ekiga-list] Re : USB Hercules Muse LT3 [SOLVED] In-Reply-To: <890951.12003.qm@web29102.mail.ird.yahoo.com> Message-ID: <117339.868.qm@web29113.mail.ird.yahoo.com> Got It Solved, in fact, USB Muse LT3 is a cheap cound card and is not able to support all codec and all change of rate sample. This particular problem was solved with the selection of CELT 32 KHz Codec Thanks --- En date de?: Mar 31.5.11, Gandalfinium Le blanc a ?crit?: De: Gandalfinium Le blanc Objet: [Ekiga-list] USB Hercules Muse LT3 ?: ekiga-list at gnome.org Date: Mardi 31 mai 2011, 20h53 Hi, I'm using this marvellous software (Ekiga) with an external sound card : the USB Hercules Gamesurround Muse XL LT3. I've configured the audio driver of ekiga to use this card specifically.? Emission of sound with mic ou line if ok but reception of sound is inaudible. It makes a incomprehensible creepy voice. I'm on Debian squeeze, I tested with a good server in gigabyte LAN still the same. I tested with the internal sound card everything was OK. Unfortunately I have to use an external sound card, such as muse. Do you think it's a codec problem that could not be sync with rate sample of the card ? Is there a specific configuration to improve the reception of sound via USB sound card ? Thank for answer -----La pi?ce jointe associ?e suit----- _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From stefan.angrick at gmail.com Sun Jun 5 11:32:46 2011 From: stefan.angrick at gmail.com (Stefan A.) Date: Sun, 5 Jun 2011 13:32:46 +0200 Subject: [Ekiga-list] Where to find Ekiga settings folder(s) Message-ID: Hi everyone, I recently started using Ekiga Ekiga 3.2.7 on Ubuntu Natty 11.04 (amd64) with an Ekiga CallOut Diamondcard account and I am so far very satisfied with it. I even decided to use it for all of my VoIP communication. However, before taking that step, I need to figure out where Ekiga keeps its settings and where it saves the contact list. I recently had to transfer all my files to a new computer and thought that copying over .gconf/apps/ekiga would do the job. However, after running Ekiga on the new system for the first time, I found that none of my data was present. Ekiga came up and presented me with the configuration wizard, as if I had run it for the first time. Since I tend to keep a lot (100+) of contacts and phone numbers in my contact list, being able to back up Ekiga's data is essential for me. I was hoping that someone more knowledgable than me could give me a hint on how to back up all of Ekiga's configuration data, so I can transfer it to my new system. Thanks in advance! From grenello at unisa.it Sun Jun 5 15:07:23 2011 From: grenello at unisa.it (Gian Paolo Renello) Date: Sun, 5 Jun 2011 17:07:23 +0200 Subject: [Ekiga-list] cannot register my sip address Message-ID: <201106051507.p55F7I3M030965@fe02.unisa.it> Hi, I installed ekiga 3.2.7 and registered with ekiga.net a sip address. But when i start the program i get the message that can't register my sip address. Sometime i get also the message that ekiga was unable to configure the network and that I should configure it manually, but this also is already done (I followed the instructions at http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually) I added a gzip output of ekiga hoping it will helps to solve the problem. Regards GPR -------------- next part -------------- A non-text attachment was scrubbed... Name: ekiga-output.gz Type: application/x-gzip Size: 5431 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: not available URL: From rm.riches at jacob21819.net Sun Jun 5 20:31:34 2011 From: rm.riches at jacob21819.net (Robert M. Riches Jr.) Date: Sun, 05 Jun 2011 13:31:34 -0700 Subject: [Ekiga-list] cannot register my sip address In-Reply-To: <201106051507.p55F7I3M030965@fe02.unisa.it> References: <201106051507.p55F7I3M030965@fe02.unisa.it> Message-ID: <20110605203135.3CE0351D5E@one.localnet> I'm also quite new to Ekiga, but I found one trick to get past the message that it can't register your sip address. When you run the initial configuration assistant (wizard), on the screen where it asks for your sip account, _DON'T_ enter anything, but check the checkbox that you don't want to register a sip address and go on. It's not very clear, but it appears that page is for you to register a _new_ address that has never been registered before. I think I had to also delete my saved configuration in the ~/.gconf/apps/ekiga to get it to let me start over from scratch. After I got through the configuration assistant, I added the pre-existing sip account through edit -> accounts or something similar. Then again, I'm trying to use 3.2.6, so it might be different. (The UI for that part of the configuration assistant could be made more clear...) Good luck with the network configuration. I'm still battling that issue myself. It appears 500 at ekiga.net is often down, which complicates the issue. At the moment, I'm am able to connect a call, but there's no audio output, even though I am able to hear test plays of wav files. HTH Robert > Date: Sun, 5 Jun 2011 17:07:23 +0200 > From: Gian Paolo Renello > To: ekiga-list at gnome.org > > > > > Hi, > > I installed ekiga 3.2.7 and registered with ekiga.net a sip > address. But when i start the program i get the message that can't > register my sip address. Sometime i get > also the message that ekiga was unable to configure the network and > that I should configure it manually, but this also is already done > (I followed the instructions at > http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually) > > I added a gzip output of ekiga hoping it will helps to solve the > problem. > > Regards > > GPR From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Jun 6 07:22:31 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 06 Jun 2011 09:22:31 +0200 Subject: [Ekiga-list] Where to find Ekiga settings folder(s) In-Reply-To: References: Message-ID: <4DEC8037.5010604@pu-pm.univ-fcomte.fr> On 05/06/11 13:32, Stefan A. wrote: > Hi everyone, I recently started using Ekiga Ekiga 3.2.7 on Ubuntu > Natty 11.04 (amd64) with an Ekiga CallOut Diamondcard account and I am > so far very satisfied with it. I even decided to use it for all of my > VoIP communication. However, before taking that step, I need to figure > out where Ekiga keeps its settings and where it saves the contact > list. > > I recently had to transfer all my files to a new computer and thought > that copying over .gconf/apps/ekiga would do the job. However, after > running Ekiga on the new system for the first time, I found that none > of my data was present. Ekiga came up and presented me with the > configuration wizard, as if I had run it for the first time. Since I > tend to keep a lot (100+) of contacts and phone numbers in my contact > list, being able to back up Ekiga's data is essential for me. > > I was hoping that someone more knowledgable than me could give me a > hint on how to back up all of Ekiga's configuration data, so I can > transfer it to my new system. Thanks in advance! The configuration, including contact list, is indeed in .gconf/apps/ekiga (contacts sub-directory). Be sure you have killed gconf on destination machine right before making the copy, since gconf has a cache. -- Eugen From geo.cherchetout at laposte.net Mon Jun 6 14:56:47 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Mon, 06 Jun 2011 16:56:47 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DE550E6.2070501@laposte.net> References: <4DE550E6.2070501@laposte.net> Message-ID: <4DECEAAF.7090405@laposte.net> Le 31/05/2011 22:34, I wrote: > Ekiga 3.2.7 and sipomatic are running on the same machine with Mandriva > 2010.2 32 bits distribution. > Stun is disabled. Video is disabled. I am not registered to any registrar. > Only sound codecs PCMA and PCMU are activated and not any video codec. Sound > is working. > When I call sip:robot at 127.0.0.1:5064 I only get this message after some time > at the bottom of main ekiga window: "Impossible de se connecter au > correspondant distant". To-day I dumped streams on lo interface with wireshark while calling sipomatic robot. The main difference I see between Ekiga's calls and Linphone's ones is that, using Ekiga, rtp streams go from 127.0.0.1 to 127.0.0.1 while, using successfully Linphone, rtp streams go from 192.168.1.6 to 192.168.1.6. Perhaps this is the beginning of an indication ? In this dump, Stun is disabled and Ekiga-3.3.0 isn't registered anywhere: http://www.cijoint.fr/cjlink.php?file=cj201106/cijo0zGqht.txt In that one, Stun is enabled (stun.ekiga.net) and Ekiga-3.3.0 is registered only at ekiga.net: http://www.cijoint.fr/cjlink.php?file=cj201106/cijLvyTPrw.txt There, Linphone is registered only at ekiga.net and STUN is enabled (stun.ekiga.net): http://www.cijoint.fr/cjlink.php?file=cj201106/cijQz2NwNI.txt Any help from anybody will be very appreciated. From norge02011 at ssp.jovenclub.cu Mon Jun 6 18:16:41 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Mon, 6 Jun 2011 12:16:41 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110606155947.A3DE67501FE@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: Re: [Ekiga-list] Can't connect to robot sipomatic Date: Mon, 6 Jun 2011 10:59:44 -0600 Size: 7768 URL: From mafeuser at gmail.com Mon Jun 6 17:27:17 2011 From: mafeuser at gmail.com (mafeuser at gmail.com) Date: Mon, 06 Jun 2011 19:27:17 +0200 Subject: [Ekiga-list] SIP RTP client offer. can I turn off Named Signalling Events Message-ID: Hallo Group Members. When ekiga issues new connection, it offers in RTP/SDP named signalling event. something like: a=rtpmap:122 NSE/8000 can I prevent Ekiga from such offer somehow? I am running ekiga 3.2.7. best regards, Paul From norge02011 at ssp.jovenclub.cu Mon Jun 6 20:18:02 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Mon, 6 Jun 2011 14:18:02 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110606174941.ABCEE7500CB@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: [Ekiga-list] SIP RTP client offer. can I turn off Named SignallingEvents Date: Mon, 6 Jun 2011 13:47:26 -0600 Size: 7541 URL: From mafeuser at gmail.com Mon Jun 6 19:33:18 2011 From: mafeuser at gmail.com (mafeuser at gmail.com) Date: Mon, 06 Jun 2011 21:33:18 +0200 Subject: [Ekiga-list] SIP RTP client offer. can I turn off Named Signalling Events Message-ID: Hallo Group Members. When ekiga issues new connection, it offers in RTP/SDP named signalling event. something like: a=rtpmap:122 NSE/8000 can I prevent Ekiga from such offer somehow? I am running ekiga 3.2.7. best regards, Paul From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jun 7 17:50:15 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 07 Jun 2011 19:50:15 +0200 Subject: [Ekiga-list] SIP RTP client offer. can I turn off Named Signalling Events In-Reply-To: References: Message-ID: <4DEE64D7.2070402@pu-pm.univ-fcomte.fr> On 06/06/11 21:33, mafeuser at gmail.com wrote: > Hallo Group Members. > > When ekiga issues new connection, it offers in RTP/SDP named signalling > event. something like: > a=rtpmap:122 NSE/8000 > > can I prevent Ekiga from such offer somehow? No, you cannot. Except if you modify sources of opal library, which adds that line. -- Eugen Dedu http://eugen.dedu.free.fr From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jun 7 18:01:05 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 07 Jun 2011 20:01:05 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DECEAAF.7090405@laposte.net> References: <4DE550E6.2070501@laposte.net> <4DECEAAF.7090405@laposte.net> Message-ID: <4DEE6761.5040904@pu-pm.univ-fcomte.fr> On 06/06/11 16:56, geo cherchetout wrote: > Le 31/05/2011 22:34, I wrote: > >> Ekiga 3.2.7 and sipomatic are running on the same machine with Mandriva >> 2010.2 32 bits distribution. >> Stun is disabled. Video is disabled. I am not registered to any registrar. >> Only sound codecs PCMA and PCMU are activated and not any video codec. Sound >> is working. >> When I call sip:robot at 127.0.0.1:5064 I only get this message after some time >> at the bottom of main ekiga window: "Impossible de se connecter au >> correspondant distant". > > To-day I dumped streams on lo interface with wireshark while calling > sipomatic robot. > The main difference I see between Ekiga's calls and Linphone's ones is that, > using Ekiga, rtp streams go from 127.0.0.1 to 127.0.0.1 while, using > successfully Linphone, rtp streams go from 192.168.1.6 to 192.168.1.6. Does it work when calling using 192.168.1.6 address? > Perhaps this is the beginning of an indication ? > > In this dump, Stun is disabled and Ekiga-3.3.0 isn't registered anywhere: > http://www.cijoint.fr/cjlink.php?file=cj201106/cijo0zGqht.txt > > In that one, Stun is enabled (stun.ekiga.net) and Ekiga-3.3.0 is registered > only at ekiga.net: > http://www.cijoint.fr/cjlink.php?file=cj201106/cijLvyTPrw.txt > > There, Linphone is registered only at ekiga.net and STUN is enabled > (stun.ekiga.net): > http://www.cijoint.fr/cjlink.php?file=cj201106/cijQz2NwNI.txt From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jun 7 18:03:30 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 07 Jun 2011 20:03:30 +0200 Subject: [Ekiga-list] cannot register my sip address In-Reply-To: <201106051507.p55F7I3M030965@fe02.unisa.it> References: <201106051507.p55F7I3M030965@fe02.unisa.it> Message-ID: <4DEE67F2.1000802@pu-pm.univ-fcomte.fr> On 05/06/11 17:07, Gian Paolo Renello wrote: > Hi, > > I installed ekiga 3.2.7 and registered with ekiga.net a sip > address. But when i start the program i get the message that can't > register my sip address. Sometime i get > also the message that ekiga was unable to configure the network and > that I should configure it manually, but this also is already done > (I followed the instructions at > http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually) > > I added a gzip output of ekiga hoping it will helps to solve the > problem. Yes, it helps. It seems to me that there was a problem with ekiga.net's stun. It should be fixed now. If it appears again, please repost with output. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jun 7 18:07:33 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 07 Jun 2011 20:07:33 +0200 Subject: [Ekiga-list] cannot register my sip address In-Reply-To: <20110605203135.3CE0351D5E@one.localnet> References: <201106051507.p55F7I3M030965@fe02.unisa.it> <20110605203135.3CE0351D5E@one.localnet> Message-ID: <4DEE68E5.2060406@pu-pm.univ-fcomte.fr> On 05/06/11 22:31, Robert M. Riches Jr. wrote: > I'm also quite new to Ekiga, but I found one trick to get past > the message that it can't register your sip address. When you > run the initial configuration assistant (wizard), on the screen > where it asks for your sip account, _DON'T_ enter anything, but > check the checkbox that you don't want to register a sip address > and go on. It's not very clear, but it appears that page is for > you to register a _new_ address that has never been registered > before. I think I had to also delete my saved configuration in > the ~/.gconf/apps/ekiga to get it to let me start over from > scratch. After I got through the configuration assistant, I > added the pre-existing sip account through edit -> accounts or > something similar. Then again, I'm trying to use 3.2.6, so it > might be different. > > (The UI for that part of the configuration assistant could be > made more clear...) Just tell more precisely what cannot be understood. On ekiga.net page in assistant is written "if you have not an account yet, you can create one below" etc. > Good luck with the network configuration. I'm still battling > that issue myself. It appears 500 at ekiga.net is often down, > which complicates the issue. At the moment, I'm am able to 500 is ok now. > connect a call, but there's no audio output, even though I am > able to hear test plays of wav files. Send us the -d 4 output, or look yourself into it. -- Eugen From geo.cherchetout at laposte.net Tue Jun 7 19:13:59 2011 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Tue, 07 Jun 2011 21:13:59 +0200 Subject: [Ekiga-list] Can't connect to robot sipomatic In-Reply-To: <4DEE6761.5040904@pu-pm.univ-fcomte.fr> References: <4DE550E6.2070501@laposte.net> <4DECEAAF.7090405@laposte.net> <4DEE6761.5040904@pu-pm.univ-fcomte.fr> Message-ID: <4DEE7877.7000504@laposte.net> Le 07/06/2011 20:01, *Eugen Dedu* wrote: > Does it work when calling using 192.168.1.6 address? Yes, Simon answers to me when I call sip:192.168.1.6:5064 or sip:robot at 192.168.1.6:5064 ! (Ekiga client not registered anywhere and STUN disabled. Same thing whis STUN enabled and Ekiga client registered at ekiga.net.) From mafeuser at gmail.com Tue Jun 7 20:47:03 2011 From: mafeuser at gmail.com (mafeuser at gmail.com) Date: Tue, 07 Jun 2011 22:47:03 +0200 Subject: [Ekiga-list] SIP RTP client offer. can I turn off Named Signalling Events In-Reply-To: <4DEE64D7.2070402@pu-pm.univ-fcomte.fr> (Eugen Dedu's message of "Tue, 07 Jun 2011 19:50:15 +0200") References: <4DEE64D7.2070402@pu-pm.univ-fcomte.fr> Message-ID: Eugen Dedu writes: > On 06/06/11 21:33, mafeuser at gmail.com wrote: >> Hallo Group Members. >> >> When ekiga issues new connection, it offers in RTP/SDP named signalling >> event. something like: >> a=rtpmap:122 NSE/8000 >> >> can I prevent Ekiga from such offer somehow? > > No, you cannot. Except if you modify sources of opal library, which adds that line. Thank You for the answer. Best regards, Paul From norge02011 at ssp.jovenclub.cu Wed Jun 8 15:04:32 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 09:04:32 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608123039.96CC37500B8@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: Re: [Ekiga-list] SIP RTP client offer. can I turn off NamedSignalling Events Date: Wed, 8 Jun 2011 08:29:11 -0600 Size: 8020 URL: From norge02011 at ssp.jovenclub.cu Wed Jun 8 15:04:29 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 09:04:29 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608123013.1C6297500B8@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: Re: [Ekiga-list] Can't connect to robot sipomatic Date: Wed, 8 Jun 2011 08:28:16 -0600 Size: 6722 URL: From norge02011 at ssp.jovenclub.cu Wed Jun 8 15:04:27 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 09:04:27 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608123002.6369075021B@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: Re: [Ekiga-list] cannot register my sip address Date: Wed, 8 Jun 2011 08:28:15 -0600 Size: 8157 URL: From norge02011 at ssp.jovenclub.cu Wed Jun 8 15:04:24 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 09:04:24 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608122950.279C87500B8@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: Re: [Ekiga-list] cannot register my sip address Date: Wed, 8 Jun 2011 08:28:13 -0600 Size: 7355 URL: From norge02011 at ssp.jovenclub.cu Wed Jun 8 15:04:21 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 09:04:21 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608122926.BD9D17500B8@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: Re: [Ekiga-list] SIP RTP client offer. can I turn off Named Signalling Events Date: Wed, 8 Jun 2011 08:28:11 -0600 Size: 7018 URL: From norge02011 at ssp.jovenclub.cu Wed Jun 8 15:04:23 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 09:04:23 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608122935.A672775021B@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: Re: [Ekiga-list] Can't connect to robot sipomatic Date: Wed, 8 Jun 2011 08:28:12 -0600 Size: 8081 URL: From norge02011 at ssp.jovenclub.cu Wed Jun 8 15:04:22 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 09:04:22 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608122920.8DDC9750234@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: [Ekiga-list] SIP RTP client offer. can I turn off Named SignallingEvents Date: Wed, 8 Jun 2011 08:26:39 -0600 Size: 7562 URL: From rm.riches at jacob21819.net Wed Jun 8 02:22:07 2011 From: rm.riches at jacob21819.net (Robert M. Riches Jr.) Date: Tue, 07 Jun 2011 19:22:07 -0700 Subject: [Ekiga-list] cannot register my sip address In-Reply-To: <4DEE68E5.2060406@pu-pm.univ-fcomte.fr> References: <201106051507.p55F7I3M030965@fe02.unisa.it> <20110605203135.3CE0351D5E@one.localnet> <4DEE68E5.2060406@pu-pm.univ-fcomte.fr> Message-ID: <20110608022208.6CFEB51D5E@one.localnet> > Date: Tue, 07 Jun 2011 20:07:33 +0200 > From: Eugen Dedu > To: Ekiga mailing list > > On 05/06/11 22:31, Robert M. Riches Jr. wrote: > > I'm also quite new to Ekiga, but I found one trick to get past > > the message that it can't register your sip address. When you > > run the initial configuration assistant (wizard), on the screen > > where it asks for your sip account, _DON'T_ enter anything, but > > check the checkbox that you don't want to register a sip address > > and go on. It's not very clear, but it appears that page is for > > you to register a _new_ address that has never been registered > > before. I think I had to also delete my saved configuration in > > the ~/.gconf/apps/ekiga to get it to let me start over from > > scratch. After I got through the configuration assistant, I > > added the pre-existing sip account through edit -> accounts or > > something similar. Then again, I'm trying to use 3.2.6, so it > > might be different. > > > > (The UI for that part of the configuration assistant could be > > made more clear...) > > Just tell more precisely what cannot be understood. On ekiga.net page > in assistant is written "if you have not an account yet, you can create > one below" etc. Thank you for the reply. Ah, yes, there it is, in italics in the middle lines of a paragraph. I try to read and follow the instructions, but I missed it. I suspect other users might also miss it. I would offer a few suggestions for consideration: Change the heading of page 3 of 8 to something like "Create a New Ekiga.net Account". The same could be done to the heading on page 4 of 8. Change the font in the two paragraphs from icalic to normal. At last on my monitor, that would make it easier to read. Add to the second paragraph so it reads something like this: You may skip this step if you already have an ekiga.net address, if you you an alternative SIP service, or if you would prefer to specify the login details later. With user interface issues, the key is not simply to make it possible for the user to understand; the key is to make is impossible for the user to not understand. > > Good luck with the network configuration. I'm still battling > > that issue myself. It appears 500 at ekiga.net is often down, > > which complicates the issue. At the moment, I'm am able to > > 500 is ok now. > > > connect a call, but there's no audio output, even though I am > > able to hear test plays of wav files. > > Send us the -d 4 output, or look yourself into it. Attaching gzipped -d 4 output. When I terminate the call by using the 'hangup' menu selection, the process appears to get very large and run into problems. It asks whether to abort or dump core. Thank you, Robert Riches rm.riches at jacob21819.net -------------- next part -------------- A non-text attachment was scrubbed... Name: zlog.gz Type: application/octet-stream Size: 31752 bytes Desc: not available URL: From chris at cvine.freeserve.co.uk Wed Jun 8 17:44:32 2011 From: chris at cvine.freeserve.co.uk (Chris Vine) Date: Wed, 8 Jun 2011 18:44:32 +0100 Subject: [Ekiga-list] Undelivered Mail Returned to Sender In-Reply-To: <20110608122926.BD9D17500B8@menubar.gnome.org> References: <20110608122926.BD9D17500B8@menubar.gnome.org> Message-ID: <20110608184432.14a1fae3@laptop.homenet> I have got a spate of these. Could whoever administers this list please set it up correctly, in particular so that it does not spam list members with bounce messages. Chris From norge02011 at ssp.jovenclub.cu Wed Jun 8 19:49:28 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 13:49:28 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608164819.3CD6F7500C1@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/rfc822-headers Size: 6173 bytes Desc: Undelivered Message Headers URL: From norge02011 at ssp.jovenclub.cu Wed Jun 8 20:53:56 2011 From: norge02011 at ssp.jovenclub.cu (Norge Rodriguez) Date: Wed, 8 Jun 2011 14:53:56 -0600 Subject: [Ekiga-list] Undelivered Mail Returned to Sender Message-ID: <20110608182329.891F97500F0@menubar.gnome.org> This is the mail system at host menubar.gnome.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system : mail forwarding loop for ekiga-list at gnome.org __________ Informaci?n de ESET NOD32 Antivirus, versi?n de la base de firmas de virus 6145 (20110523) __________ ESET NOD32 Antivirus ha comprobado este mensaje. http://www.eset.com -------------- next part -------------- An embedded message was scrubbed... From: "Norge Rodriguez" Subject: Re: [Ekiga-list] Undelivered Mail Returned to Sender Date: Wed, 8 Jun 2011 14:23:24 -0600 Size: 7004 URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Jun 9 07:20:59 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 09 Jun 2011 09:20:59 +0200 Subject: [Ekiga-list] Undelivered Mail Returned to Sender In-Reply-To: <20110608184432.14a1fae3@laptop.homenet> References: <20110608122926.BD9D17500B8@menubar.gnome.org> <20110608184432.14a1fae3@laptop.homenet> Message-ID: <4DF0745B.7040402@pu-pm.univ-fcomte.fr> On 08/06/11 19:44, Chris Vine wrote: > I have got a spate of these. > > Could whoever administers this list please set it up correctly, in > particular so that it does not spam list members with bounce messages. It has been fixed, see https://bugzilla.gnome.org/show_bug.cgi?id=652147. -- Eugen From anto.trande at gmail.com Thu Jun 9 09:30:52 2011 From: anto.trande at gmail.com (Antonio Trande) Date: Thu, 9 Jun 2011 11:30:52 +0200 Subject: [Ekiga-list] chat In-Reply-To: <4DD27C19.8030309@pu-pm.univ-fcomte.fr> References: <4DD2768A.9020400@pu-pm.univ-fcomte.fr> <4DD27C19.8030309@pu-pm.univ-fcomte.fr> Message-ID: News ? 2011/5/17 Eugen Dedu > On 17/05/11 15:37, Antonio Trande wrote: > >> gtk3-3.0.9-1 >> gdk-pixbuf2-2.23.3-1.fc15.x86_64 >> >> 2011/5/17 Antonio Trande >> >> >>> >>> 2011/5/17 Eugen Dedu >>> >>> On 17/05/11 12:33, Antonio Trande wrote: >>>> >>>> If try to send a textual message to another acconut, the phrase doesn't >>>>> seem >>>>> to be displayed. >>>>> >>>>> PS. Screenshot on attachment. >>>>> >>>>> >>>> Trace does not show any message sent. The problem is that when you type >>>> ENTER, ekiga does not see it: the cursor is on the second line. >>>> >>>> Have you modified ENTER key? What gdk and gtk do you use? >>>> >>> >>> >>> No, absolutely. >>> I use gtk. >>> >> > Ok. I think you have to wait a bit, we are preparing a GTK3 port, and > probably we will see that the ENTER key should be treated differently. > Recall us in let's say 10 days. > > (If you are ready to compile ekiga yourself, I can tell you a modification > to try.) > > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- *Antonio Trande ** **Sip Address* : sip:sagitter AT ekiga.net *Jabber * :sagitter AT jabber.org *GPG Key: CFE3479C** * -------------- next part -------------- An HTML attachment was scrubbed... URL: From grenello at unisa.it Thu Jun 9 12:02:12 2011 From: grenello at unisa.it (Gian Paolo Renello) Date: Thu, 9 Jun 2011 14:02:12 +0200 Subject: [Ekiga-list] cannot register my sip address In-Reply-To: <4DEE67F2.1000802@pu-pm.univ-fcomte.fr> References: <201106051507.p55F7I3M030965@fe02.unisa.it> <4DEE67F2.1000802@pu-pm.univ-fcomte.fr> Message-ID: <201106091202.p59C2DlV003057@fe02.unisa.it> Hi Eugen Dedu, tx for your answer. I repost a new debug output since it is still not possible to register. I suspect there is a problem in my sistem (Debian Sid), because I also tried with Qutecom and Linphone to see if worked and i have also problems. Regards Gian Paolo > On 05/06/11 17:07, Gian Paolo Renello wrote: > > Hi, > > > > I installed ekiga 3.2.7 and registered with ekiga.net a sip > > address. But when i start the program i get the message that can't > > register my sip address. Sometime i get > > also the message that ekiga was unable to configure the network and > > that I should configure it manually, but this also is already done > > (I followed the instructions at > > http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually) > > > > I added a gzip output of ekiga hoping it will helps to solve the > > problem. > > Yes, it helps. It seems to me that there was a problem with > ekiga.net's stun. It should be fixed now. > > If it appears again, please repost with output. > Public pgp key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x894B0EB0 -------------- next part -------------- A non-text attachment was scrubbed... Name: ekiga-output1.gz Type: application/x-gzip Size: 8258 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: not available URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Jun 9 12:28:43 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 09 Jun 2011 14:28:43 +0200 Subject: [Ekiga-list] cannot register my sip address In-Reply-To: <201106091202.p59C2DlV003057@fe02.unisa.it> References: <201106051507.p55F7I3M030965@fe02.unisa.it> <4DEE67F2.1000802@pu-pm.univ-fcomte.fr> <201106091202.p59C2DlV003057@fe02.unisa.it> Message-ID: <4DF0BC7B.2090201@pu-pm.univ-fcomte.fr> Unfortunately, there is a problem with stun server right now :o( I think we need to investigate how to cope with such problem automatically in ekiga... On 09/06/11 14:02, Gian Paolo Renello wrote: > Hi Eugen Dedu, > > tx for your answer. I repost a new debug output since it is > still not possible to register. I suspect there is a problem in my > sistem (Debian Sid), because I also tried with Qutecom and Linphone to > see if worked and i have also problems. > > Regards > > Gian Paolo > >> On 05/06/11 17:07, Gian Paolo Renello wrote: >>> Hi, >>> >>> I installed ekiga 3.2.7 and registered with ekiga.net a sip >>> address. But when i start the program i get the message that can't >>> register my sip address. Sometime i get >>> also the message that ekiga was unable to configure the network and >>> that I should configure it manually, but this also is already done >>> (I followed the instructions at >>> http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually) >>> >>> I added a gzip output of ekiga hoping it will helps to solve the >>> problem. >> >> Yes, it helps. It seems to me that there was a problem with >> ekiga.net's stun. It should be fixed now. >> >> If it appears again, please repost with output. >> > > > > > > Public pgp key: > http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x894B0EB0 > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From pervlex at hotmail.com Thu Jun 9 14:03:17 2011 From: pervlex at hotmail.com (Alfonso Napoles) Date: Thu, 9 Jun 2011 09:03:17 -0500 Subject: [Ekiga-list] Ekiga STUN server failure, please repair it... Message-ID: Hello, some hours ago my ekiga service fail, my ATA device simply can't register anymore with ekiga service... after a lot of troubleshooting I discovered that changing the STUN server from stun.ekiga.net to a different one (like stun.xten.com or stun.fwd.net) all work again... Can you repair your STUN server please, and also please consider a way to edit the STUN server manually on your ekiga softphone. Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL: From pervlex at hotmail.com Thu Jun 9 14:24:40 2011 From: pervlex at hotmail.com (Alfonso Napoles) Date: Thu, 9 Jun 2011 09:24:40 -0500 Subject: [Ekiga-list] STUN server alternative, maybe? Message-ID: Maybe you can consider the use of a STUN server alternative: http://www.stunserver.org/ an open and freely-available STUN server... The following information was obtained from the stunserver.org web site: Anyone is welcome to use the STUN server that can be found at stunserver.org. We intend to leave this STUN server up permanently using this domain name. However, do not hardwire the name "stunserver.org" into any STUN client software delivered to users; instead, give it as as suggested name. At this moment, we have a single STUN server running the open-source stund server software. The server resides at iol.unh.edu in Durham, NH, USA, and is not behind a NAT of any kind. http://sourceforge.net/projects/stun/ Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL: From anto.trande at gmail.com Thu Jun 9 15:43:00 2011 From: anto.trande at gmail.com (Antonio Trande) Date: Thu, 9 Jun 2011 17:43:00 +0200 Subject: [Ekiga-list] STUN server alternative, maybe? In-Reply-To: References: Message-ID: Are Ekiga-client going to connect to the new stun server ? 2011/6/9 Alfonso Napoles > Maybe you can consider the use of a STUN server alternative: > > http://www.stunserver.org/ > > an open and freely-available STUN server... > > The following information was obtained from the stunserver.org web site: > > Anyone is welcome to use the STUN server that can be found at > stunserver.org. We intend to leave this STUN server up permanently using > this domain name. However, *do not* hardwire the name "stunserver.org" > into any STUN client software delivered to users; instead, give it as as > suggested name. > > At this moment, we have a single STUN server running the open-source stund > server software. The server resides at iol.unh.edu in Durham, NH, USA, and > is not behind a NAT of any kind. > > http://sourceforge.net/projects/stun/ > > Thank you. > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- *Antonio Trande "Fedora Ambassador" "Fedora Italian Translator" **mail*: mailto:sagitter at fedoraproject.org *Homepage*: http://fedora-os.org/ *Sip Address* : sip:sagitter AT ekiga.net *Jabber * :sagitter AT jabber.org *GPG Key: CFE3479C** * -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Jun 9 20:31:46 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 09 Jun 2011 22:31:46 +0200 Subject: [Ekiga-list] Ekiga STUN server failure, please repair it... In-Reply-To: References: Message-ID: <4DF12DB2.7010208@pu-pm.univ-fcomte.fr> On 09/06/11 16:03, Alfonso Napoles wrote: > > Hello, some hours ago my ekiga service fail, my ATA device simply can't register anymore with ekiga service... after a lot of troubleshooting I discovered that changing the STUN server from stun.ekiga.net to a different one (like stun.xten.com or stun.fwd.net) all work again... > > Can you repair your STUN server please, and also please consider a way to edit the STUN server manually on your ekiga softphone. Back in the past, there were users who told that stun.ekiga.net does not function reliably. A few days ago, stun.ekiga.net was changed to point to stun.opalvoip.org, who was said to work reliably. Here is what happened when it became inaccessible: On 09/06/11 17:30, Craig Southeren wrote: > The stun.opalvoip.org server became unresponsive earlier today due to > saturation of it's 10Mbit/sec network connection. > At this point, I was notified by my hosting company that the server was > probably under attack due to the rapid and unexpected increase in traffic. > > It's taken me until now to realise what the problem was :) > > So, I will pay to increase bandwidth to 100MBit/sec for an extra $10 per > month and lets see if this solves the problem :) We can see this as ekiga effect, aka slashdot effect :o) Now it is online. As it was a really transient problem, it is better to stand with it. If things go bad later, then we can think at an alternative solution. -- Eugen From anto.trande at gmail.com Fri Jun 10 09:53:43 2011 From: anto.trande at gmail.com (Antonio Trande) Date: Fri, 10 Jun 2011 11:53:43 +0200 Subject: [Ekiga-list] Ekiga STUN server failure, please repair it... In-Reply-To: <4DF12DB2.7010208@pu-pm.univ-fcomte.fr> References: <4DF12DB2.7010208@pu-pm.univ-fcomte.fr> Message-ID: My client works fine with stun.ekiga.net . [?] Must i change stun server ? 2011/6/9 Eugen Dedu > On 09/06/11 16:03, Alfonso Napoles wrote: > >> >> Hello, some hours ago my ekiga service fail, my ATA device simply can't >> register anymore with ekiga service... after a lot of troubleshooting I >> discovered that changing the STUN server from stun.ekiga.net to a >> different one (like stun.xten.com or stun.fwd.net) all work again... >> >> Can you repair your STUN server please, and also please consider a way to >> edit the STUN server manually on your ekiga softphone. >> > > Back in the past, there were users who told that stun.ekiga.net does not > function reliably. > > A few days ago, stun.ekiga.net was changed to point to stun.opalvoip.org, > who was said to work reliably. Here is what happened when it became > inaccessible: > > On 09/06/11 17:30, Craig Southeren wrote: > > The stun.opalvoip.org server became unresponsive earlier today due to > > saturation of it's 10Mbit/sec network connection. > > At this point, I was notified by my hosting company that the server was > > probably under attack due to the rapid and unexpected increase in > traffic. > > > > It's taken me until now to realise what the problem was :) > > > > So, I will pay to increase bandwidth to 100MBit/sec for an extra $10 per > > month and lets see if this solves the problem :) > > We can see this as ekiga effect, aka slashdot effect :o) > > Now it is online. As it was a really transient problem, it is better to > stand with it. If things go bad later, then we can think at an alternative > solution. > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- *Antonio Trande "Fedora Ambassador" "Fedora Italian Translator" **mail*: mailto:sagitter at fedoraproject.org *Homepage*: http://fedora-os.org/ *Sip Address* : sip:sagitter AT ekiga.net *Jabber * :sagitter AT jabber.org *GPG Key: CFE3479C** * -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 331.gif Type: image/gif Size: 362 bytes Desc: not available URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Jun 10 09:58:04 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 10 Jun 2011 11:58:04 +0200 Subject: [Ekiga-list] Ekiga STUN server failure, please repair it... In-Reply-To: References: <4DF12DB2.7010208@pu-pm.univ-fcomte.fr> Message-ID: <4DF1EAAC.7090203@pu-pm.univ-fcomte.fr> On 10/06/11 11:53, Antonio Trande wrote: > My client works fine with stun.ekiga.net . [?] > > Must i change stun server ? No. > 2011/6/9 Eugen Dedu > >> On 09/06/11 16:03, Alfonso Napoles wrote: >> >>> >>> Hello, some hours ago my ekiga service fail, my ATA device simply can't >>> register anymore with ekiga service... after a lot of troubleshooting I >>> discovered that changing the STUN server from stun.ekiga.net to a >>> different one (like stun.xten.com or stun.fwd.net) all work again... >>> >>> Can you repair your STUN server please, and also please consider a way to >>> edit the STUN server manually on your ekiga softphone. >>> >> >> Back in the past, there were users who told that stun.ekiga.net does not >> function reliably. >> >> A few days ago, stun.ekiga.net was changed to point to stun.opalvoip.org, >> who was said to work reliably. Here is what happened when it became >> inaccessible: >> >> On 09/06/11 17:30, Craig Southeren wrote: >>> The stun.opalvoip.org server became unresponsive earlier today due to >>> saturation of it's 10Mbit/sec network connection. >>> At this point, I was notified by my hosting company that the server was >>> probably under attack due to the rapid and unexpected increase in >> traffic. >>> >>> It's taken me until now to realise what the problem was :) >>> >>> So, I will pay to increase bandwidth to 100MBit/sec for an extra $10 per >>> month and lets see if this solves the problem :) >> >> We can see this as ekiga effect, aka slashdot effect :o) >> >> Now it is online. As it was a really transient problem, it is better to >> stand with it. If things go bad later, then we can think at an alternative >> solution. >> >> -- >> Eugen >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > > > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From rm.riches at jacob21819.net Mon Jun 13 00:38:10 2011 From: rm.riches at jacob21819.net (Robert M. Riches Jr.) Date: Sun, 12 Jun 2011 17:38:10 -0700 Subject: [Ekiga-list] cannot register my sip address In-Reply-To: <4DEE68E5.2060406@pu-pm.univ-fcomte.fr> References: <201106051507.p55F7I3M030965@fe02.unisa.it> <20110605203135.3CE0351D5E@one.localnet> <4DEE68E5.2060406@pu-pm.univ-fcomte.fr> Message-ID: <20110613003811.B1EB951D5E@one.localnet> I tried replying a week ago, but I think my reply got lost, possibly due to the problems the mailing list was having at the time. > Date: Tue, 07 Jun 2011 20:07:33 +0200 > From: Eugen Dedu > To: Ekiga mailing list > > On 05/06/11 22:31, Robert M. Riches Jr. wrote: > > I'm also quite new to Ekiga, but I found one trick to get past > > the message that it can't register your sip address. When you > > run the initial configuration assistant (wizard), on the screen > > where it asks for your sip account, _DON'T_ enter anything, but > > check the checkbox that you don't want to register a sip address > > and go on. It's not very clear, but it appears that page is for > > you to register a _new_ address that has never been registered > > before. I think I had to also delete my saved configuration in > > the ~/.gconf/apps/ekiga to get it to let me start over from > > scratch. After I got through the configuration assistant, I > > added the pre-existing sip account through edit -> accounts or > > something similar. Then again, I'm trying to use 3.2.6, so it > > might be different. > > > > (The UI for that part of the configuration assistant could be > > made more clear...) > > Just tell more precisely what cannot be understood. On ekiga.net page > in assistant is written "if you have not an account yet, you can create > one below" etc. Thank you for the reply. Ah, yes, there it is, in italics in the middle lines of a paragraph. I try to read and follow the instructions, but I missed it. I suspect other users might also miss it. I would offer a few suggestions for consideration: Change the heading of page 3 of 8 to something like "Create a New Ekiga.net Account". The same could be done to the heading on page 4 of 8. Change the font in the two paragraphs from icalic to normal. At last on my monitor, that would make it easier to read. Add to the second paragraph so it reads something like this: You may skip this step if you already have an ekiga.net address, if you you an alternative SIP service, or if you would prefer to specify the login details later. With user interface issues, the key is not simply to make it possible for the user to understand; the key is to make is impossible for the user to not understand. > > Good luck with the network configuration. I'm still battling > > that issue myself. It appears 500 at ekiga.net is often down, > > which complicates the issue. At the moment, I'm am able to > > 500 is ok now. > > > connect a call, but there's no audio output, even though I am > > able to hear test plays of wav files. > > Send us the -d 4 output, or look yourself into it. Attaching new gzipped -d 4 output. When I terminate the call by using the 'hangup' menu selection, the process appears to get very large and run into problems. The 'top' program showed the ekiga process with a virtual size of about 1.9GB and a resident size of about 0.9GB. The (2003-era) machine has 1GB of RAM. After a while, it asks whether to abort or dump core. This time, I tried dumping core to see what that would do. System load average shot up above 10, 'vmstat' showed that the machine was thrashing, and the core file ended up about 1.9GB in size. I'm currently trying to use the Ekiga 3.2.6 that came with Mandriva 2010.0. I looked through the -d 4 output, but I don't know how to interpret it to tell what the problem might be with the audio. Thank you, Robert Riches rm.riches at jacob21819.net -------------- next part -------------- A non-text attachment was scrubbed... Name: z-ekiga-log.gz Type: application/octet-stream Size: 34166 bytes Desc: not available URL: From david.halliday at silvaco.com Wed Jun 15 00:22:17 2011 From: david.halliday at silvaco.com (David Halliday) Date: Tue, 14 Jun 2011 17:22:17 -0700 Subject: [Ekiga-list] Disconnect after about 30 sec Message-ID: <4DF7FB39.7050408@silvaco.com> I am running Ekiga on Rhel 6.1 and using it to connect directly to various Tandberg systems via H323: The problem is some of the systems will disconnect 32 seconds into the call with. "Remote user cleared the connection" The Tandberg systems have no problems maintaining the call between themselves and Microsoft Netmeeting also has no problem maintaining the call to the 'problem' Tandberg units either. I did find a reference to back in the Dec 08 archives that seems similar but no conclusion on how to fix the problem. Changing the Tandberg systems in any way is out of the question as they are mostly EOL and out of maintenance. I have uploaded a debug (-d 4) trace to http://www.silvaco.com/pub/misc/ekiga_fails.txt in the hope someone can help. Thanks, Dave. From david.halliday at silvaco.com Wed Jun 15 01:39:50 2011 From: david.halliday at silvaco.com (David Halliday) Date: Tue, 14 Jun 2011 18:39:50 -0700 Subject: [Ekiga-list] Disconnect after about 30 sec In-Reply-To: <4DF7FB39.7050408@silvaco.com> References: <4DF7FB39.7050408@silvaco.com> Message-ID: <4DF80D66.4080601@silvaco.com> One more data point, I have also downloaded Ekiga 3.3.0 for XP and it shows the same problem of disconnecting after about 30 seconds so I don't suspect the Redhat OS from the previous post. Dave. From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jun 15 17:41:13 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 15 Jun 2011 19:41:13 +0200 Subject: [Ekiga-list] 3.3.1 release very soon Message-ID: <4DF8EEB9.7000306@pu-pm.univ-fcomte.fr> Hi, Just to inform you that as soon as I find a bit of time, there will be a new 3.3.1 unstable release. No major (disruptive) changes are planned in the following months, so starting from this release ekiga will be better and better, at least for the following months. But I cannot assure you about that, since my previous assumptions about the future were often wrong :o) If you have a simple bug which can be fixed before, please tell us. -- Eugen From anto.trande at gmail.com Wed Jun 15 18:33:43 2011 From: anto.trande at gmail.com (Antonio Trande) Date: Wed, 15 Jun 2011 20:33:43 +0200 Subject: [Ekiga-list] 3.3.1 release very soon In-Reply-To: <4DF8EEB9.7000306@pu-pm.univ-fcomte.fr> References: <4DF8EEB9.7000306@pu-pm.univ-fcomte.fr> Message-ID: Hello ! I don't know if is a bug. ekiga chat doesn't work indeed if i write a message, after enter key click it is not sent to interlocutor. That happens with Ekiga 3.2.6/Fedora14 or Ekiga 3.3/Fedora15. 2011/6/15 Eugen Dedu > Hi, > > Just to inform you that as soon as I find a bit of time, there will be a > new 3.3.1 unstable release. No major (disruptive) changes are planned in > the following months, so starting from this release ekiga will be better and > better, at least for the following months. But I cannot assure you about > that, since my previous assumptions about the future were often wrong :o) > > If you have a simple bug which can be fixed before, please tell us. > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- *Antonio Trande "Fedora Ambassador" **mail*: mailto:sagitter at fedoraproject.org *Homepage*: http://feora-os.org *Sip Address* : sip:sagitter AT ekiga.net *Jabber * :sagitter AT jabber.org *GPG Key: CFE3479C* -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Screenshot.png Type: image/png Size: 10638 bytes Desc: not available URL: From frank2701 at gmail.com Wed Jun 15 19:04:58 2011 From: frank2701 at gmail.com (Francisco Ferron) Date: Wed, 15 Jun 2011 21:04:58 +0200 Subject: [Ekiga-list] Help Ekiga configuration Message-ID: <1308164698.2722.2.camel@francisco-desktop> Hello all I need your help to configure properly Ekiga. I create my account and used the guided configuration to set up the software. I tried to make a test using sip:500 at ekiga.net but I have the following message (Impossible to register sip:myusername at ekiga.net). I'm using a router D-Link model DSL-2640B, internet is working properly. My operative system is Ubuntu 9.10 karmic koala. Video is working properly. I try also to install ekiga with windows creating a new account, but I found the same problem. Could you help me to configure the software, please?? Many thanks in Advance Frank -------------- next part -------------- An HTML attachment was scrubbed... URL: From craigs at postincrement.com Wed Jun 15 22:43:12 2011 From: craigs at postincrement.com (Craig Southeren) Date: Thu, 16 Jun 2011 08:43:12 +1000 Subject: [Ekiga-list] Disconnect after about 30 sec In-Reply-To: <4DF80D66.4080601@silvaco.com> References: <4DF7FB39.7050408@silvaco.com> <4DF80D66.4080601@silvaco.com> Message-ID: <4DF93580.4070708@postincrement.com> On 15/06/2011 11:39 AM, David Halliday wrote: > One more data point, I have also downloaded Ekiga 3.3.0 for XP and it shows the same problem of disconnecting after about 30 seconds so I don't suspect the Redhat OS from the previous post. A quick look at the logs shows that it was the Tandberg that dropped the call. So, we have to determine why it might do this. Dropouts near the 30 second mark are sometimes due to one end dropping the call because they have not received media. This may be due to a codec mismatch, or a NAT problem, or even lack of support for RTCP. I would start with a simple call, say G.711 only, and see if that works. If it does, try adding video but use low bandwidth and try different codecs. Note that the Opal H.261 codec is very, very simple-minded. It could well be that it is too simple for the other end :) Craig ----------------------------------------------------------------------- Craig Southeren Post Increment ? VoIP Consulting and Software craigs at postincrement.com.au www.postincrement.com.au Phone: +61 243654666 ICQ: #86852844 Fax: +61 243656905 MSN: craig_southeren at hotmail.com Mobile: +61 417231046 Jabber: craigs at jabber.org "Science is the poetry of reality." Richard Dawkins From david.halliday at silvaco.com Thu Jun 16 05:57:28 2011 From: david.halliday at silvaco.com (David Halliday) Date: Wed, 15 Jun 2011 22:57:28 -0700 Subject: [Ekiga-list] Disconnect after about 30 sec In-Reply-To: <4DF93580.4070708@postincrement.com> References: <4DF7FB39.7050408@silvaco.com> <4DF80D66.4080601@silvaco.com> <4DF93580.4070708@postincrement.com> Message-ID: <4DF99B48.6010800@silvaco.com> > Note that the Opal H.261 codec is very, very simple-minded. It could > well be that it is too simple for the other end :) Thanks Craig, that helped narrowed it down but unfortunately does not yield a solution. If I disable video it stays connected. The problem is while the Tandberg supports many codecs Ekiga only had Theora and H.261 installed on Redhat. Many hours later after compiling up a version of Opal that has all the nice codecs I finally go to try one of the others and they are ALL flagged SIP only no H.323!! Is there a way to make the other video codecs work with H.323? The Tandberg units support: Digital Signaling Protocol: H.323, H.320 Data Compression Protocol: G.711, G.728, G.722, H.261, H.263, H.264, H.263+ So SIP is not an option. Thanks Dave. From david.halliday at silvaco.com Fri Jun 17 19:46:43 2011 From: david.halliday at silvaco.com (David Halliday) Date: Fri, 17 Jun 2011 12:46:43 -0700 Subject: [Ekiga-list] Ekiga 3.2.7 with Ptlib 2.10.1 and Opal 3.10.1 Message-ID: <4DFBAF23.6050702@silvaco.com> I am trying to compile Ekiga 3.2.7 with the latest released ptlib and opal. These libs supposedly add support for H323 to many of the video codecs. (I need this to around a problem with H261 to Tandberg systems). Moving to the Ekiga 3.3.0 is not practical as it seems to demand updated versions of just about all system libs from glibc to boost none of which are available on the latest Redhat 6update1 I am using. There seem to be only a few issues with the 3.2.7 compile and I hope someone has some patches i can apply to make the above combo work. The errors I get are: bash-4.1$ make -k 2>&1 | grep error /site/local/programs/ekiga-exp/x86_64-linux/include/opal/opal/connection.h:1852: error: \u2018virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::IsConnectionOnHold()\u2019 is private ../../../../lib/engine/components/opal/opal-call.cpp:157: error: within this context /site/local/programs/ekiga-exp/x86_64-linux/include/opal/opal/connection.h:1859: error: \u2018virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::HoldConnection()\u2019 is private ../../../../lib/engine/components/opal/opal-call.cpp:159: error: within this context /site/local/programs/ekiga-exp/x86_64-linux/include/opal/opal/connection.h:1860: error: \u2018virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::RetrieveConnection()\u2019 is private ../../../../lib/engine/components/opal/opal-call.cpp:161: error: within this context ../../../../lib/engine/components/opal/opal-call.cpp:480: error: \u2018EndedWithQ931Code\u2019 is not a member of \u2018OpalConnection\u2019 ../../../../lib/engine/components/opal/sip-endpoint.h:183: error: conflicting return type specified for \u2018virtual void Opal::Sip::EndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 /site/local/programs/ekiga-exp/x86_64-linux/include/opal/sip/sipep.h:1034: error: overriding \u2018virtual ptlib_virtual_function_changed_or_removed****** SIPEndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 ../../../../lib/engine/components/opal/sip-endpoint.h:183: error: conflicting return type specified for \u2018virtual void Opal::Sip::EndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 /site/local/programs/ekiga-exp/x86_64-linux/include/opal/sip/sipep.h:1034: error: overriding \u2018virtual ptlib_virtual_function_changed_or_removed****** SIPEndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 ../../../../lib/engine/components/opal/sip-endpoint.h:183: error: conflicting return type specified for \u2018virtual void Opal::Sip::EndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 /site/local/programs/ekiga-exp/x86_64-linux/include/opal/sip/sipep.h:1034: error: overriding \u2018virtual ptlib_virtual_function_changed_or_removed****** SIPEndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 ../../../../lib/engine/components/opal/sip-endpoint.cpp:355: error: no matching function for call to \u2018Opal::Sip::EndPoint::Message(const std::basic_string, std::allocator >&, const std::basic_string, std::allocator >&)\u2019 Many Thanks. Dave. From m971668 at gmail.com Sat Jun 18 02:19:52 2011 From: m971668 at gmail.com (Marc Dunivan) Date: Fri, 17 Jun 2011 19:19:52 -0700 Subject: [Ekiga-list] Linphone for iPhone Ekiga account setup Message-ID: Does anyone know how to get Ekiga working in Linphone for iPhone? Domain: ekiga.net Proxy: stun.ekiga.net outbound proxy: off transport: udp codecs: Speex 16Khz Speex 8Khz GSM ILBC PCMA PCMU -Marc From drmesmith at yahoo.com Sat Jun 18 13:45:03 2011 From: drmesmith at yahoo.com (Mark Smith) Date: Sat, 18 Jun 2011 08:45:03 -0500 Subject: [Ekiga-list] unsubscribe Message-ID: <4DFCABDF.7080705@yahoo.com> From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Jun 20 20:41:27 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 20 Jun 2011 22:41:27 +0200 Subject: [Ekiga-list] Linphone for iPhone Ekiga account setup In-Reply-To: References: Message-ID: <4DFFB077.8010600@pu-pm.univ-fcomte.fr> On 18/06/11 04:19, Marc Dunivan wrote: > > Does anyone know how to get Ekiga working in Linphone for iPhone? > Domain: ekiga.net > Proxy: stun.ekiga.net > outbound proxy: off > transport: udp > codecs: > Speex 16Khz > Speex 8Khz > GSM > ILBC > PCMA > PCMU Do you mean "working WITH linphone"? Does http://wiki.ekiga.org/index.php/Ekiga_Interoperability help? -- Eugen Dedu http://eugen.dedu.free.fr From gleam.uahmed at gmail.com Wed Jun 22 08:32:35 2011 From: gleam.uahmed at gmail.com (uahmed) Date: Wed, 22 Jun 2011 13:32:35 +0500 Subject: [Ekiga-list] Ekiga Installer Windows Message-ID: Hi Is there anyway to remove the installer windows and intstall the ekiga with its default settings . Thank You Bye Ahmed -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jun 22 09:08:53 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 22 Jun 2011 11:08:53 +0200 Subject: [Ekiga-list] Ekiga 3.2.7 with Ptlib 2.10.1 and Opal 3.10.1 In-Reply-To: <4DFBAF23.6050702@silvaco.com> References: <4DFBAF23.6050702@silvaco.com> Message-ID: <4E01B125.5010004@pu-pm.univ-fcomte.fr> On 17/06/11 21:46, David Halliday wrote: > I am trying to compile Ekiga 3.2.7 with the latest released ptlib and > opal. These libs supposedly add support for H323 to many of the video > codecs. (I need this to around a problem with H261 to Tandberg systems). > > Moving to the Ekiga 3.3.0 is not practical as it seems to demand updated > versions of just about all system libs from glibc to boost none of which > are available on the latest Redhat 6update1 I am using. Sorry to answer so late. ptlib/opal libraries evolve continuously without retaining backward compatibility. So it is generally impossible to use an old ekiga with new ptlib/opal. If you really wish to do it, look at http://git.gnome.org/browse/ekiga/log/ and search for changes fixing your compilation errors. For ex., for your errors look at: http://git.gnome.org/browse/ekiga/commit/?id=72d7b95bd8df3b667 http://git.gnome.org/browse/ekiga/commit/?id=6eb6995892c49226 etc. I would really advise to use 3.3.0 (or the very soon 3.3.1). If you have problems with gtk or other lib dependency (which one?), I think it is better to use ekiga 3.3.0/1 and revert changes which push the dependencies. Finally, I am not sure that updating ptlib/opal will allow you to use H323, I suppose that ekiga too needs a modification. Whether this modification consists in only ekiga.schemes change (adding H323 to the codecs concerned) or other changes, I could not answer yet... > There seem to be only a few issues with the 3.2.7 compile and I hope > someone has some patches i can apply to make the above combo work. > > The errors I get are: > > bash-4.1$ make -k 2>&1 | grep error > /site/local/programs/ekiga-exp/x86_64-linux/include/opal/opal/connection.h:1852: > error: \u2018virtual ptlib_virtual_function_changed_or_removed****** > OpalConnection::IsConnectionOnHold()\u2019 is private > ../../../../lib/engine/components/opal/opal-call.cpp:157: error: within > this context > /site/local/programs/ekiga-exp/x86_64-linux/include/opal/opal/connection.h:1859: > error: \u2018virtual ptlib_virtual_function_changed_or_removed****** > OpalConnection::HoldConnection()\u2019 is private > ../../../../lib/engine/components/opal/opal-call.cpp:159: error: within > this context > /site/local/programs/ekiga-exp/x86_64-linux/include/opal/opal/connection.h:1860: > error: \u2018virtual ptlib_virtual_function_changed_or_removed****** > OpalConnection::RetrieveConnection()\u2019 is private > ../../../../lib/engine/components/opal/opal-call.cpp:161: error: within > this context > ../../../../lib/engine/components/opal/opal-call.cpp:480: error: > \u2018EndedWithQ931Code\u2019 is not a member of \u2018OpalConnection\u2019 > ../../../../lib/engine/components/opal/sip-endpoint.h:183: error: > conflicting return type specified for \u2018virtual void > Opal::Sip::EndPoint::OnMessageFailed(const SIPURL&, > SIP_PDU::StatusCodes)\u2019 > /site/local/programs/ekiga-exp/x86_64-linux/include/opal/sip/sipep.h:1034: > error: overriding \u2018virtual > ptlib_virtual_function_changed_or_removed****** > SIPEndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 > ../../../../lib/engine/components/opal/sip-endpoint.h:183: error: > conflicting return type specified for \u2018virtual void > Opal::Sip::EndPoint::OnMessageFailed(const SIPURL&, > SIP_PDU::StatusCodes)\u2019 > /site/local/programs/ekiga-exp/x86_64-linux/include/opal/sip/sipep.h:1034: > error: overriding \u2018virtual > ptlib_virtual_function_changed_or_removed****** > SIPEndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 > ../../../../lib/engine/components/opal/sip-endpoint.h:183: error: > conflicting return type specified for \u2018virtual void > Opal::Sip::EndPoint::OnMessageFailed(const SIPURL&, > SIP_PDU::StatusCodes)\u2019 > /site/local/programs/ekiga-exp/x86_64-linux/include/opal/sip/sipep.h:1034: > error: overriding \u2018virtual > ptlib_virtual_function_changed_or_removed****** > SIPEndPoint::OnMessageFailed(const SIPURL&, SIP_PDU::StatusCodes)\u2019 > ../../../../lib/engine/components/opal/sip-endpoint.cpp:355: error: no > matching function for call to \u2018Opal::Sip::EndPoint::Message(const > std::basic_string, std::allocator >&, > const std::basic_string, > std::allocator >&)\u2019 From chandrashekaran.iyer at gmail.com Sun Jun 26 14:42:36 2011 From: chandrashekaran.iyer at gmail.com (Chandrashekaran Iyer) Date: Sun, 26 Jun 2011 20:12:36 +0530 Subject: [Ekiga-list] Problems Message-ID: Hello Ekiga Team, I believe Ekiga is a great programme. On Ubuntu-11.04, barring a couple of hiccups initially I was able to set up everything nicely. Testing of both Audio & Vid worked out well indeed. However, on Win XP and in the case of my Brother-in-Law, Windows7, Ekiga is very problematic. On XP Vid works but audio is totally NIL. On Windows7, Neither audio nor Vid work. In bothcases we have followed the procedure as given out by you folks. Be good if you could give us HELP in getting Ekiga installed and functional in XP & Win7 Waiting to hear from you Regards AS Chandrashekaran -- Flat8, Rajeswari Apts, 58,Baktavatchalam Rd, Mylapore, Chennai - 600004 Tel:+914424934742 -------------- next part -------------- An HTML attachment was scrubbed... URL: From ncassanova11 at gmail.com Tue Jun 28 02:11:12 2011 From: ncassanova11 at gmail.com (Nikolai Cassanova) Date: Mon, 27 Jun 2011 22:11:12 -0400 Subject: [Ekiga-list] Nikolai Cassanova: does ekiga work with dialup Message-ID: Hi wanted to know if ekiga works over dialup internet connection? -------------- next part -------------- An HTML attachment was scrubbed... URL: From tiberiu.breana at gmail.com Tue Jun 28 12:07:01 2011 From: tiberiu.breana at gmail.com (Tiberiu Breana) Date: Tue, 28 Jun 2011 15:07:01 +0300 Subject: [Ekiga-list] ekiga.net subscribe spam Message-ID: Hello. Is there any way to stop Ekiga from spamming SUBSCRIBE requests to 500 at ekiga.net? I'm not using the Ekiga account service and these messages are disturbing my SIP server. -------------- next part -------------- An HTML attachment was scrubbed... URL: From andre at bwh.harvard.edu Wed Jun 29 11:09:11 2011 From: andre at bwh.harvard.edu (Andre Robatino) Date: Wed, 29 Jun 2011 07:09:11 -0400 Subject: [Ekiga-list] stun server down Message-ID: <4E0B07D7.1070806@bwh.harvard.edu> The stun server stun.ekiga.net (alias for stun.opalvoip.org) has been down for about a day now. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jun 29 14:09:08 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 29 Jun 2011 16:09:08 +0200 Subject: [Ekiga-list] stun server down In-Reply-To: <4E0B07D7.1070806@bwh.harvard.edu> References: <4E0B07D7.1070806@bwh.harvard.edu> Message-ID: <4E0B3204.6080004@pu-pm.univ-fcomte.fr> On 29/06/11 13:09, Andre Robatino wrote: > The stun server stun.ekiga.net (alias for stun.opalvoip.org) has been > down for about a day now. Indeed, we are sorry. stun.opalvoip.org STUN server was stopped, since the bandwidth was really too high. We need to find a good server (as soon as we release), in the meantime please use stun.xten.com or the other from the thread with stun... -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jun 29 14:16:29 2011 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 29 Jun 2011 16:16:29 +0200 Subject: [Ekiga-list] ekiga.net subscribe spam In-Reply-To: References: Message-ID: <4E0B33BD.9080805@pu-pm.univ-fcomte.fr> On 28/06/11 14:07, Tiberiu Breana wrote: > Hello. Is there any way to stop Ekiga from spamming SUBSCRIBE requests to > 500 at ekiga.net? > I'm not using the Ekiga account service and these messages are disturbing my > SIP server. Please look at https://bugzilla.gnome.org/show_bug.cgi?id=618607 for a workaround. Also, remove 500 account. -- Eugen