From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 1 08:08:33 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 01 Sep 2010 10:08:33 +0200 Subject: [Ekiga-list] 1080p video conference In-Reply-To: References: <4C7D6C92.3020003@pu-pm.univ-fcomte.fr> Message-ID: <4C7E0A01.3090908@pu-pm.univ-fcomte.fr> On 31/08/10 23:00, Josu Lazkano wrote: > Thanks for your reply, where could I get those threads? http://mail.gnome.org/archives/ekiga-devel-list/2009-April/thread.html, search for "High" (two threads). > I must compile it? I am new on this, I use Debian Squeeze packages. Yes, you must compile opal, and also ekiga I think, afterwards, see http://wiki.ekiga.org/index.php/Download_Ekiga_sources. But it will be a bit of work, the patches are not finished it seems. > Thanks and regards. > > 2010/8/31 Eugen Dedu: >> On 31/08/10 22:51, Josu Lazkano wrote: >>> >>> Hello everybody! I am new on this list. I am interested on 1080p video >>> conference with Ekiga and this webcam: >>> >>> http://www.logitech.com/webcam_communications/webcams/devices/6816?WT.mc_id=global_pr-c910_redirect_072010 >>> >>> Is possible to make working? I need some hardware encode/decoder? >>> >>> Is there any interesting HD webcam? >> >> Ekiga works at 640x480 max for the moment. There were 1 or two threads on >> this list (or -devel list) about increasing the max resolution, even with >> patches. >> >> -- >> Eugen From dudumomo at hotmail.fr Wed Sep 1 16:42:29 2010 From: dudumomo at hotmail.fr (Morgan Alias Dudumomo) Date: Wed, 1 Sep 2010 16:42:29 +0000 Subject: [Ekiga-list] Could not register (Failed) Message-ID: Hi there, I'm trying to connect Ekiga to my ekiga's account but I always got the following error: Could not register sip:dudumomo at ekiga.net Any idea why ? I'm running Ubuntu 10.04 with Ekiga 3.2.6 (~nat) Thanks for your help -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 1 17:28:41 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 01 Sep 2010 19:28:41 +0200 Subject: [Ekiga-list] Could not register (Failed) In-Reply-To: References: Message-ID: <4C7E8D49.6020304@pu-pm.univ-fcomte.fr> On 01/09/10 18:42, Morgan Alias Dudumomo wrote: > Hi there, > I'm trying to connect Ekiga to my ekiga's account but I always got the following error: > Could not register sip:dudumomo at ekiga.net > > Any idea why ? > > I'm running Ubuntu 10.04 with Ekiga 3.2.6 (~nat) > > Thanks for your help Start ekiga with debugging option -d 4 and look at the output. If you do not find out what is the error, send the output to us. Are you sure the password you use is correct? -- Eugen From dudumomo at hotmail.fr Wed Sep 1 17:46:02 2010 From: dudumomo at hotmail.fr (Morgan Alias Dudumomo) Date: Wed, 1 Sep 2010 17:46:02 +0000 Subject: [Ekiga-list] Could not register (Failed) In-Reply-To: <4C7E8D49.6020304@pu-pm.univ-fcomte.fr> References: , <4C7E8D49.6020304@pu-pm.univ-fcomte.fr> Message-ID: Thanks for the tips. Could it be due to the SRV record ? (Sound wierd) Here is the result: 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 OpalUDP Setting interface to 172.20.23.253%usb0 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 SIP Transaction timers set: retry=0.500, completion=6.000 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 SIP Starting SUBSCRIBE for offline retry 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 SIP Changing SUBSCRIBE handler from Unavailable to Restoring, target=sip:500 at ekiga.net, id=aedb787d-5db4-df11-9d24-ce1185568896 at maryse-desktop 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 OpalUDP Writing to interface 0 - "172.20.23.253%usb0" 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 SIP Transaction created. 2010/09/01 19:41:31.011 2:33.779 Housekeeper:0xb7415b70 DNS SRV Lookup ekiga.net service _sip._udp 2010/09/01 19:41:34.867 2:37.634 Housekeeper:0xb7415b70 SIP No SRV record found. 2010/09/01 19:41:34.867 2:37.635 Housekeeper:0xb7415b70 SIP Transaction remote address is udp$ekiga.net:5060 2010/09/01 19:41:34.867 2:37.635 Housekeeper:0xb7415b70 SIP Sending PDU (560 bytes) to: rem=udp$86.64.162.35:5060,local=udp$172.20.23.253:5060,if=172.20.23.253%usb0 SUBSCRIBE sip:500 at ekiga.net SIP/2.0 CSeq: 5 SUBSCRIBE Via: SIP/2.0/UDP 172.20.23.253:5060;branch=z9hG4bK7c5c0bd3-5db4-df11-9d24-ce1185568896;rport User-Agent: Ekiga/3.2.6 From: ;tag=b8700480-5db4-df11-9d24-ce1185568896 Call-ID: aedb787d-5db4-df11-9d24-ce1185568896 at maryse-desktop To: Contact: Accept: application/dialog-info xml Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,SUBSCRIBE,NOTIFY,REFER,MESSAGE,INFO,PING Expires: 300 Event: dialog;sla;ma Content-Length: 0 Max-Forwards: 70 Thanks for your help > Date: Wed, 1 Sep 2010 19:28:41 +0200 > From: Eugen.Dedu at pu-pm.univ-fcomte.fr > To: ekiga-list at gnome.org > Subject: Re: [Ekiga-list] Could not register (Failed) > > On 01/09/10 18:42, Morgan Alias Dudumomo wrote: > > Hi there, > > I'm trying to connect Ekiga to my ekiga's account but I always got the following error: > > Could not register sip:dudumomo at ekiga.net > > > > Any idea why ? > > > > I'm running Ubuntu 10.04 with Ekiga 3.2.6 (~nat) > > > > Thanks for your help > > Start ekiga with debugging option -d 4 and look at the output. If you > do not find out what is the error, send the output to us. Are you sure > the password you use is correct? > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 1 17:51:31 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 01 Sep 2010 19:51:31 +0200 Subject: [Ekiga-list] Could not register (Failed) In-Reply-To: References: , <4C7E8D49.6020304@pu-pm.univ-fcomte.fr> Message-ID: <4C7E92A3.8000803@pu-pm.univ-fcomte.fr> No. You must search for "INVITE " (note the space) and look right afterwards at the answer (SIP received). On 01/09/10 19:46, Morgan Alias Dudumomo wrote: > Thanks for the tips. > > Could it be due to the SRV record ? (Sound wierd) > > Here is the result: > > 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 OpalUDP Setting interface to 172.20.23.253%usb0 > 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 SIP Transaction timers set: retry=0.500, completion=6.000 > 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 SIP Starting SUBSCRIBE for offline retry > 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 SIP Changing SUBSCRIBE handler from Unavailable to Restoring, target=sip:500 at ekiga.net, id=aedb787d-5db4-df11-9d24-ce1185568896 at maryse-desktop > 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 OpalUDP Writing to interface 0 - "172.20.23.253%usb0" > 2010/09/01 19:41:31.008 2:33.776 Housekeeper:0xb7415b70 SIP Transaction created. > 2010/09/01 19:41:31.011 2:33.779 Housekeeper:0xb7415b70 DNS SRV Lookup ekiga.net service _sip._udp > 2010/09/01 19:41:34.867 2:37.634 Housekeeper:0xb7415b70 SIP No SRV record found. > 2010/09/01 19:41:34.867 2:37.635 Housekeeper:0xb7415b70 SIP Transaction remote address is udp$ekiga.net:5060 > 2010/09/01 19:41:34.867 2:37.635 Housekeeper:0xb7415b70 SIP Sending PDU (560 bytes) to: rem=udp$86.64.162.35:5060,local=udp$172.20.23.253:5060,if=172.20.23.253%usb0 > SUBSCRIBE sip:500 at ekiga.net SIP/2.0 > CSeq: 5 SUBSCRIBE > Via: SIP/2.0/UDP 172.20.23.253:5060;branch=z9hG4bK7c5c0bd3-5db4-df11-9d24-ce1185568896;rport > User-Agent: Ekiga/3.2.6 > From: ;tag=b8700480-5db4-df11-9d24-ce1185568896 > Call-ID: aedb787d-5db4-df11-9d24-ce1185568896 at maryse-desktop > To: > Contact: > Accept: application/dialog-info xml > Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,SUBSCRIBE,NOTIFY,REFER,MESSAGE,INFO,PING > Expires: 300 > Event: dialog;sla;ma > Content-Length: 0 > Max-Forwards: 70 > > Thanks for your help > >> Date: Wed, 1 Sep 2010 19:28:41 +0200 >> From: Eugen.Dedu at pu-pm.univ-fcomte.fr >> To: ekiga-list at gnome.org >> Subject: Re: [Ekiga-list] Could not register (Failed) >> >> On 01/09/10 18:42, Morgan Alias Dudumomo wrote: >>> Hi there, >>> I'm trying to connect Ekiga to my ekiga's account but I always got the following error: >>> Could not register sip:dudumomo at ekiga.net >>> >>> Any idea why ? >>> >>> I'm running Ubuntu 10.04 with Ekiga 3.2.6 (~nat) >>> >>> Thanks for your help >> >> Start ekiga with debugging option -d 4 and look at the output. If you >> do not find out what is the error, send the output to us. Are you sure >> the password you use is correct? >> >> -- >> Eugen >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From aspamkiller at yandex.ru Wed Sep 1 20:26:27 2010 From: aspamkiller at yandex.ru (D.P.) Date: Wed, 1 Sep 2010 23:26:27 +0300 Subject: [Ekiga-list] Could not register (Failed) In-Reply-To: <4C7E92A3.8000803@pu-pm.univ-fcomte.fr> References: <4C7E8D49.6020304@pu-pm.univ-fcomte.fr> <4C7E92A3.8000803@pu-pm.univ-fcomte.fr> Message-ID: <20100901232627.2667fc4b.aspamkiller@yandex.ru> On Wed, 01 Sep 2010 19:51:31 +0200 Eugen Dedu wrote: > No. You must search for "INVITE " (note the space) and look right > afterwards at the answer (SIP received). Hi. I have now the similar problem with (sic!) VoipCheap, but with more details. The same account, and exactly the same config files (I copied the full ~/.gconf/apps/ekiga/ directory) from two boxes - one in Ukraine, another in Belgium. That one in Ukraine registers well, and I can make calls. The box from Belgium can`t register at all. The first box - that`s an archlinux 64bit running on a desktop, the second - a laptop, arch-linux 32-bit. Ekiga versions sure are the same. When started ekiga with -d 4 I did`nt found any "INVITE " lines in his output, but subscriber:0xafe49b70 SIP No SRV record found. AND ekiga.net account works well on both boxes. Any help is very much welcome. //Dima From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 1 21:22:09 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 01 Sep 2010 23:22:09 +0200 Subject: [Ekiga-list] Could not register (Failed) In-Reply-To: <20100901232627.2667fc4b.aspamkiller@yandex.ru> References: <4C7E8D49.6020304@pu-pm.univ-fcomte.fr> <4C7E92A3.8000803@pu-pm.univ-fcomte.fr> <20100901232627.2667fc4b.aspamkiller@yandex.ru> Message-ID: <4C7EC401.2010701@pu-pm.univ-fcomte.fr> On 01/09/10 22:26, D.P. wrote: > On Wed, 01 Sep 2010 19:51:31 +0200 > Eugen Dedu wrote: > >> No. You must search for "INVITE " (note the space) and look right >> afterwards at the answer (SIP received). > > Hi. I have now the similar problem with (sic!) VoipCheap, but with more details. > > The same account, and exactly the same config files (I copied the full ~/.gconf/apps/ekiga/ directory) from two boxes - one in Ukraine, another in Belgium. That one in Ukraine registers well, and I can make calls. The box from Belgium can`t register at all. > > The first box - that`s an archlinux 64bit running on a desktop, the second - a laptop, arch-linux 32-bit. > > Ekiga versions sure are the same. > > When started ekiga with -d 4 I did`nt found any "INVITE " lines in his output, but > subscriber:0xafe49b70 SIP No SRV record found. > > AND ekiga.net account works well on both boxes. > > Any help is very much welcome. Look at the small script from http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output, which keeps from the output only the SIP conversations. REGISTER is for registering, INVITE is for calling. You will get useful information about what is wrong. Also, be sure that before copying .gconf data, you kill gconf and remove ~/.gconfd/saved_state. -- Eugen From mberard at groupesdp.com Tue Sep 7 05:42:42 2010 From: mberard at groupesdp.com (=?iso-8859-1?Q?Martin_B=E9rard?=) Date: Tue, 7 Sep 2010 01:42:42 -0400 Subject: [Ekiga-list] Citrix HDX Ready Message-ID: We are very impressed with Ekiga and wish to use it and deploy it into our Citrix XenApp Farm. I know the current Windows version is in beta but anyone knows why I,m unable to use Citrix HDX Webcam redirection? Thank you Martin From adamecra at seznam.cz Tue Sep 7 21:35:45 2010 From: adamecra at seznam.cz (adamecra at seznam.cz) Date: Tue, 07 Sep 2010 23:35:45 +0200 (CEST) Subject: [Ekiga-list] Citrix HDX Ready In-Reply-To: Message-ID: <501.289.665-14614-1876029992-1283895345@seznam.cz> > ------------ P?vodn? zpr?va ------------ > Od: Martin B?rard > P?edm?t: [Ekiga-list] Citrix HDX Ready > Datum: 07.9.2010 07:55:31 > ---------------------------------------- > We are very impressed with Ekiga and wish to use it and deploy it into our > Citrix XenApp Farm. I know the current Windows version is in beta but anyone > knows why I,m unable to use Citrix HDX Webcam redirection? > > Thank you > > Martin > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > don?t spam me pls From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 8 08:47:22 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Sep 2010 10:47:22 +0200 Subject: [Ekiga-list] VoipCheap calls does not work In-Reply-To: <20100822163652.b4718a82.aspamkiller@yandex.ru> References: <20100821230054.947f405f.aspamkiller@yandex.ru> <4C710A4F.2080004@pu-pm.univ-fcomte.fr> <20100822144809.89df5e1f.aspamkiller@yandex.ru> <4C711129.9090101@pu-pm.univ-fcomte.fr> <20100822153458.da2cfd91.aspamkiller@yandex.ru> <4C712004.9050908@pu-pm.univ-fcomte.fr> <20100822163652.b4718a82.aspamkiller@yandex.ru> Message-ID: <4C874D9A.7010504@pu-pm.univ-fcomte.fr> On 22/08/10 15:36, D.P. wrote: > Ok. I switched off all G7* audio and theora and MP4V-ES video codecs. > Call won`t work. > Then I restarted ekiga, but the same. > > Then I switched off all of videocodecs except theora. > Calls working. > > Then I switched on all audiocodecs, video is still theora only. > Calls won`t work. > > So switching off G7* audiocodecs. > > Then I started playing with video codecs: > theora calls works > theora + h261 calls works > theora + h261 + h263 calls won`t work > theora + h261 + h263-1998 calls won`t work > theora + h261 + MP4V-ES calls won`t work > MP4V-ES calls works > h263-1998 calls works > h263 calls works > > So there`s exactly only one video-codec that can running, with no G7* audio at the same time. Sorry to answer so late. I see that theora + h261 works, so two video codecs work too... The only thing I can tell is to look over the debug output (-d 4) for each of the cases where the calls do not work to test if it is the issue of too big packet, look at http://wiki.ekiga.org/index.php/Troubleshooting#I_hear_the_ring.2C_but_the_communication_is_not_established. If not, create a bug report. If yes, you have nothing to do, it is a known issue. > On Sun, 22 Aug 2010 15:03:00 +0200 > Eugen Dedu wrote: > >> I was wrong. Your issue is not related to video codecs. It is just >> that you have too many codecs enabled, and the packet is too big to >> enter the network. > > Where do I need to change the packet size for sip protocol, and why there`s no auto negotiation? You cannot change the packet size. The "auto-negotiation" means using TCP instead of UDP, but this is not yet finished, see https://bugzilla.gnome.org/show_bug.cgi?id=341518 > Really, I don`t know which codecs needed for which providers, so how can I switch off unused, if I don`t know which codecs do I use? You are right. Hint: As it seems your provider is an audio-only service, you can check off all video codecs. >> Just remove say 7 audio and video codecs you do not use (such as G.72x) >> and tell us if it works with video codecs enabled too. > > Also, could I complain to the small, non-resizable list of codecs, that makes it very unusable? ) Yes. Create a bug report and add a screenshot. -- Eugen From listofx at gmail.com Wed Sep 8 08:48:00 2010 From: listofx at gmail.com (Mouse Rusty) Date: Wed, 8 Sep 2010 16:48:00 +0800 Subject: [Ekiga-list] Ekiga for windows behind a home router can not make a call to the client on Ubuntu behind the same router. Message-ID: Ekiga for windows behind a home router can not make a call to the client on Ubuntu behind the same router. Instead of ekiga for windows, I have tried eyebeam. eyebeam works very well ( to make a call ). Wireshark ( a network traffic analyzer ) give me some results. But I am not familiar to sip protocol and feel a little difficult to analysis it. But I am sure the logs will be helpful. ?attached? -------------- next part -------------- A non-text attachment was scrubbed... Name: sip log.7z Type: application/x-7z-compressed Size: 14810 bytes Desc: not available URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 8 09:32:46 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Sep 2010 11:32:46 +0200 Subject: [Ekiga-list] Ekiga for windows behind a home router can not make a call to the client on Ubuntu behind the same router. In-Reply-To: References: Message-ID: <4C87583E.3@pu-pm.univ-fcomte.fr> On 08/09/10 10:48, Mouse Rusty wrote: > Ekiga for windows behind a home router can not make a call to the > client on Ubuntu behind the same router. > > Instead of ekiga for windows, I have tried eyebeam. eyebeam works very > well ( to make a call ). > > Wireshark ( a network traffic analyzer ) give me some results. But I > am not familiar to sip protocol and feel a little difficult to > analysis it. But I am sure the logs will be helpful. ?attached? I do not understand why in linux pcap the IP is .100, while in windows pcap-s the IP is .102. Haven't the captures been taken from the same communication? By the way, me too I noticed that a linux and a windows on the same lan cannot communicate each other (but they can communicate with ekiga.net concurrently). -- Eugen From listofx at gmail.com Wed Sep 8 13:03:09 2010 From: listofx at gmail.com (Mouse Rusty) Date: Wed, 8 Sep 2010 21:03:09 +0800 Subject: [Ekiga-list] Ekiga for windows behind a home router can not make a call to the client on Ubuntu behind the same router. In-Reply-To: <4C87583E.3@pu-pm.univ-fcomte.fr> References: <4C87583E.3@pu-pm.univ-fcomte.fr> Message-ID: > > I do not understand why in linux pcap the IP is .100, while in windows > pcap-s the IP is .102. ?Haven't the captures been taken from the same > communication? Linux box's IP was designated to 192.168.1.100 and the windows was assigned to .102 These logs did not be taken from the same communication (not exactly in the same session). You might be willing to have a look at the invite message from 'ekiga for windows' log. The following request caused different subsequent packets when comparing it to eyebeam's log. 77 15:52:18.517797 192.168.1.102 81.23.228.150 SIP/SDP Request: INVITE sip:2233424123 at sip2sip.info, with session description ...... ...... > > By the way, me too I noticed that a linux and a windows on the same lan > cannot communicate each other (but they can communicate with ekiga.net > concurrently). > Do you mean that a calling initiated outside can ring any client on the LAN? From javibarroso at gmail.com Thu Sep 9 09:48:52 2010 From: javibarroso at gmail.com (Javier Barroso) Date: Thu, 9 Sep 2010 11:48:52 +0200 Subject: [Ekiga-list] Why my ekiga is continually trying to subscribe to my contacts telephone numbers ? Message-ID: Hi list, I'm having troubles with ekiga. When I left it open two days open, normally it will start to fail. It say that it is registered, but it is not in our asterisk server. Today I investigated the problem some time. I'll try to explain here, and will ask about another question related: First, Seems like my ekiga lost the register this night, asterisk tell us about is unknown status but ekiga dialog show us about connected status. After editing and cancel accounts preferences ekiga tell about not connect status. >From ekiga -d4 logs: 2010/09/08 16:30:34.588 32:13:29.082 Housekeeper:0xb48ffb70 SIP Set state Terminated_Timeout for SUBSCRIBE transaction id=z9hG4bKd43fdd4b-c3b9-df11-8850-0017a420b5ad 2010/09/08 16:30:34.588 32:13:29.082 Housekeeper:0xb48ffb70 SIP Changing SUBSCRIBE handler from Restoring to Unavailable, target=sip:javi at xxxx, id=8c307b3c-b5b8-df11-8850-0017a420b5ad at pepinux 2010/09/08 16:30:34.588 32:13:29.082 Housekeeper:0xb48ffb70 SIP Retrying SUBSCRIBE in 30 seconds. 2010/09/08 16:30:34.588 32:13:29.082 Housekeeper:0xb48ffb70 SIP Set state Terminated_Timeout for SUBSCRIBE transaction id=z9hG4bKbe95de4b-c3b9-df11-8850-0017a420b5ad 2010/09/08 16:30:34.589 32:13:29.082 Housekeeper:0xb48ffb70 SIP Changing SUBSCRIBE handler from Unavailable to Unavailable, target=sip:javi at xxxxx, id=8c307b3c-b5b8-df11-8850-0017a420b5ad at pepinux 2010/09/08 16:30:34.589 32:13:29.082 Housekeeper:0xb48ffb70 SIP Retrying SUBSCRIBE in 30 seconds. I'm viewing this continualy in ekiga.log: grep "2010/09/09.*Set state Terminated_Timeout for SUBSCRIBE" ekiga.log | awk '{gsub ("....$","",$2); print $2}' | uniq -c | sort -n 36 00:00:36 36 00:01:12 36 00:01:49 36 00:02:25 36 00:03:02 36 00:03:39 36 00:04:16 36 00:04:53 .... all the time ... 36 11:26:34 36 11:27:11 36 11:27:48 36 11:28:24 36 11:29:01 36 11:29:38 36 11:30:15 36 11:30:52 36 11:31:29 36 11:32:05 (the time which I'm writting this mail) Is it normal ? I'm viewing too this in wireshark capture (continuously launching SIP SUBSCRIBE REQUEST): 198 6.674571 192.168.101.120 38.223.166.2 SIP Request: SUBSCRIBE sip:javi at xxxxx 199 6.676041 10.4.0.120 38.223.166.2 SIP Request: SUBSCRIBE sip:javi at xxxxxx 202 6.681867 192.168.101.120 38.117.97.125 SIP Request: SUBSCRIBE sip:javi at yyyyyy 203 6.683218 10.4.0.120 38.117.97.125 SIP Request: SUBSCRIBE sip:javi at yyyyy I'm viewing at least 4 ips against ekiga is trying to subscribe my contacts: 38.117.97.125, 38.223.166.2, 40.233.138.214, 39.165.13.136 I has only one account in my ekiga, and is to our internal asterisk. Can I configure ekiga to not do such things (subscribe to externals ips)? Anther issue, do you know why my linux is logging as two ip different (10.4.0.120 and 192.168.101.120) ? My ip route config is: $ ip route 10.4.0.0/24 dev br-gest proto kernel scope link src 10.4.0.120 192.168.0.0/16 dev br-lan proto kernel scope link src 192.168.101.120 default via 192.168.100.1 dev br-lan So I don't understand why connections to 38.223.166.2 goes sometimes with my 10.4.0.120 ip ... And another thing which could be related are this logs: 2010/09/09 11:43:43.629 51:26:38.123 Opal Liste...0xb48beb70 MonSock Socket read UDP error (113): No existe ninguna ruta hasta el `host' 2010/09/09 11:43:43.629 51:26:38.123 Opal Liste...0xb48beb70 Listen UDP read error. 2010/09/09 11:43:43.629 51:26:38.123 Opal Liste...0xb48beb70 MonSock Socket read UDP error (113): No existe ninguna ruta hasta el `host' 2010/09/09 11:43:43.629 51:26:38.123 Opal Liste...0xb48beb70 Listen UDP read error. 2010/09/09 11:44:13.371 51:27:07.865 Housekeeper:0xb48ffb70 SIP Starting SUBSCRIBE for offline retry 2010/09/09 11:44:13.371 51:27:07.865 Housekeeper:0xb48ffb70 SIP Changing SUBSCRIBE handler from Unavailable to Restoring, target=sip:javi at 659466050, id=8c307b3c-b5b8-df11-8850-0017a420b5ad at pepinux It is related ? grep "2010/09/09.*No existe ninguna" ekiga.log | awk '{gsub ("....$","",$2); print $2}' | uniq -c | sort -n 2 00:00:00 2 00:00:37 2 00:01:13 2 00:01:50 2 00:02:26 2 00:03:03 2 00:03:40 2 00:04:17 2 00:04:54 ...... 3 11:42:26 3 11:43:02 3 11:44:16 3 11:44:53 3 11:45:30 3 11:46:06 3 11:46:44 Can I stop this setting ekiga with any network configuration ? Any tip is appreciated Thank you very much ! From rowens at ptd.net Thu Sep 9 13:55:31 2010 From: rowens at ptd.net (Rob Owens) Date: Thu, 9 Sep 2010 09:55:31 -0400 Subject: [Ekiga-list] private conference rooms not working? In-Reply-To: <20100108152225.GA32683@aurora.owens.net> References: <20100108152225.GA32683@aurora.owens.net> Message-ID: <20100909135531.GA20247@aurora.owens.net> On Fri, Jan 08, 2010 at 10:22:26AM -0500, Rob Owens wrote: > I've tried dialing sip:5001234 at ekiga.net as specified on > http://wiki.ekiga.org/index.php/Fun_Numbers. The conference room > feature seems to work, but it's always public. I tried entering a PIN > (even though I was never asked for one), but it didn't have any effect. > > How can I get a private conference room set up? > I'm still having this problem. Has anybody successfully used the private conference rooms offered by ekiga.org? If not, could somebody else test it for me to verify the problem? By the way, there was a mistake in my original email. I'm dialing sip:5011234 at ekiga.net, and I never get asked for a PIN. I'm using Ekiga 2.0.12 on Debian Lenny. -Rob From listofx at gmail.com Fri Sep 10 03:41:33 2010 From: listofx at gmail.com (Mouse Rusty) Date: Fri, 10 Sep 2010 11:41:33 +0800 Subject: [Ekiga-list] keypress at promts during a pc to phone call does not work. Message-ID: Hi , everybody, I am in China. Today, I called a local number of postal service using ekiga softphone on ubuntu. After I got through, It prompted that I need to press 0 to get the manual service. Neither keypress on the keyboard nor mouse click on the dial pad of ekiga worked. Linphone works. Kind Regards, xiang From listofx at gmail.com Fri Sep 10 03:41:33 2010 From: listofx at gmail.com (Mouse Rusty) Date: Fri, 10 Sep 2010 11:41:33 +0800 Subject: [Ekiga-list] keypress at promts during a pc to phone call does not work. Message-ID: Hi , everybody, I am in China. Today, I called a local number of postal service using ekiga softphone on ubuntu. After I got through, It prompted that I need to press 0 to get the manual service. Neither keypress on the keyboard nor mouse click on the dial pad of ekiga worked. Linphone works. Kind Regards, xiang From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Sep 10 07:44:35 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 10 Sep 2010 09:44:35 +0200 Subject: [Ekiga-list] keypress at promts during a pc to phone call does not work. In-Reply-To: References: Message-ID: <4C89E1E3.4030606@pu-pm.univ-fcomte.fr> On 10/09/10 05:41, Mouse Rusty wrote: > Hi , everybody, > > I am in China. Today, I called a local number of postal service using > ekiga softphone on ubuntu. After I got through, It prompted that I > need to press 0 to get the manual service. Neither keypress on the > keyboard nor mouse click on the dial pad of ekiga worked. Try changing Protocols->SIPSettings->SendDTMF in Edit->Preferences. What ekiga version do you use? -- Eugen From listofx at gmail.com Fri Sep 10 08:46:22 2010 From: listofx at gmail.com (Mouse Rusty) Date: Fri, 10 Sep 2010 16:46:22 +0800 Subject: [Ekiga-list] keypress at promts during a pc to phone call does not work. In-Reply-To: <4C89E1E3.4030606@pu-pm.univ-fcomte.fr> References: <4C89E1E3.4030606@pu-pm.univ-fcomte.fr> Message-ID: On 10 September 2010 15:44, Eugen Dedu wrote: > On 10/09/10 05:41, Mouse Rusty wrote: >> >> Hi , everybody, >> >> I am in China. Today, I called a local number of postal service using >> ekiga softphone on ubuntu. After I got through, It prompted that I >> need to press 0 to get the manual service. Neither keypress on the >> keyboard nor mouse click on the dial pad of ekiga worked. > > Try changing Protocols->SIPSettings->SendDTMF in Edit->Preferences. What > ekiga version do you use? > After setting 'Send DTMF as' RFC2833, It works now. Thanks. version: ekiga 3.2.6 From info at ingesi.it Wed Sep 15 09:15:09 2010 From: info at ingesi.it (INGeSI di Alessandro Barisone) Date: Wed, 15 Sep 2010 11:15:09 +0200 Subject: [Ekiga-list] how to configure STUN in Ekiga 3.2.7 Message-ID: <4C908E9D.7040406@ingesi.it> Hi I have installed (from source) Ekiga 3.2.7 on slackware 13.3 I have some problems (other people can't hear my voice, sometimes I can't be reached from incoming calls). I'm not able to configure the router beacuse I don't have the password. So I would like to try to configure the STUN server, but I can't find where to set up the STUN server. I've read in the wiki, and I've found that exists an option Edit ? Preferences ? General Settings ? Network Settings where I can enable or disable netwok detection. Searching on google I've also found that in ekiga preferences I should see a "network settings" menu voice under "Protocols", where I should be able to insert the STUN server address, but in my version this option doesn't appear. I've configured ekiga to use an euteliavoip account following this howto http://www.euteliavoip.com/download/manuals/EUTELIAVOIPGuida_Ekiga_Rev1-0.pdf It refers to an old ekiga version, I've adapted to the current version I would like to try using the Euteliavoip STUN Thank you for any help Alessandro Barisone From misc at nezmer.info Wed Sep 15 14:04:50 2010 From: misc at nezmer.info (Nezmer) Date: Wed, 15 Sep 2010 17:04:50 +0300 Subject: [Ekiga-list] ekiga from git fails to build with opal from svn Message-ID: <20100915140450.GA19689@mail> Hi, I wanted to test the H264 fixes committed lately to opal. But unfortunately ekiga (release and from git) fails to build with opal from svn. I can see there is not much going on in ekiga's git repo. But I hope someone can look into this. Here is the build error If someone is interested: CXX opal-call.lo /usr/include/opal/opal/connection.h: In member function ?virtual void Opal::Call::toggle_hold()?: /usr/include/opal/opal/connection.h:1864:5: error: ?virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::IsConnectionOnHold(bool)? is private ../lib/engine/components/opal/opal-call.cpp:160:52: error: within this context ../lib/engine/components/opal/opal-call.cpp:160:52: warning: ?virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::IsConnectionOnHold(bool)? is deprecated (declared at /usr/include/opal/opal/connection.h:1864) /usr/include/opal/opal/connection.h:1862:5: error: ?virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::HoldConnection()? is private ../lib/engine/components/opal/opal-call.cpp:162:35: error: within this context ../lib/engine/components/opal/opal-call.cpp:162:35: warning: ?virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::HoldConnection()? is deprecated (declared at /usr/include/opal/opal/connection.h:1862) /usr/include/opal/opal/connection.h:1863:5: error: ?virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::RetrieveConnection()? is private ../lib/engine/components/opal/opal-call.cpp:164:39: error: within this context ../lib/engine/components/opal/opal-call.cpp:164:39: warning: ?virtual ptlib_virtual_function_changed_or_removed****** OpalConnection::RetrieveConnection()? is deprecated (declared at /usr/include/opal/opal/connection.h:1863) ../lib/engine/components/opal/opal-call.cpp:162:36: warning: ignoring return value of function declared with attribute warn_unused_result ../lib/engine/components/opal/opal-call.cpp:164:40: warning: ignoring return value of function declared with attribute warn_unused_result /usr/include/opal/opal/mediatype.h: At global scope: /usr/include/opal/opal/mediatype.h:328:1: warning: ?PFactoryLoader::T38PseudoRTP_Handler_loader? defined but not used /usr/include/opal/rtp/rtp.h:1195:1: warning: ?PFactoryLoader::RTP_Encoding_loader? defined but not used /usr/include/opal/opal/pres_ent.h:688:1: warning: ?PFactoryLoader::SIPLocal_Presentity_loader? defined but not used /usr/include/opal/opal/pres_ent.h:689:1: warning: ?PFactoryLoader::SIPXCAP_Presentity_loader? defined but not used /usr/include/opal/opal/pres_ent.h:690:1: warning: ?PFactoryLoader::SIPOMA_Presentity_loader? defined but not used /usr/include/opal/opal/recording.h:194:1: warning: ?PFactoryLoader::OpalWAVRecordManager_loader? defined but not used make[3]: *** [opal-call.lo] Error 1 make[3]: Leaving directory `build_dir/ekiga/src/ekiga-build/lib' make[2]: *** [all] Error 2 make[2]: Leaving directory `build_dir/ekiga/src/ekiga-build/lib' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `build_dir/ekiga/src/ekiga-build' make: *** [all] Error 2 From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 15 14:47:00 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 15 Sep 2010 16:47:00 +0200 Subject: [Ekiga-list] how to configure STUN in Ekiga 3.2.7 In-Reply-To: <4C908E9D.7040406@ingesi.it> References: <4C908E9D.7040406@ingesi.it> Message-ID: <4C90DC64.5020301@pu-pm.univ-fcomte.fr> On 15/09/10 11:15, INGeSI di Alessandro Barisone wrote: > Hi > > I have installed (from source) Ekiga 3.2.7 on slackware 13.3 > > I have some problems (other people can't hear my voice, sometimes I > can't be reached from incoming calls). > > I'm not able to configure the router beacuse I don't have the password. > > So I would like to try to configure the STUN server, but I can't find > where to set up the STUN server. > > I've read in the wiki, and I've found that exists an option > Edit ? Preferences ? General Settings ? Network Settings > where I can enable or disable netwok detection. > > Searching on google I've also found that in ekiga preferences I should > see a "network settings" menu voice under "Protocols", where I should be > able to insert the STUN server address, but in my version this option > doesn't appear. > > I've configured ekiga to use an euteliavoip account following this howto > http://www.euteliavoip.com/download/manuals/EUTELIAVOIPGuida_Ekiga_Rev1-0.pdf > > It refers to an old ekiga version, I've adapted to the current version > > I would like to try using the Euteliavoip STUN Hi, In ekiga v3 I think, STUN server cannot be entered graphically, via Preferences, a wishlist bug exists https://bugzilla.gnome.org/show_bug.cgi?id=599434. You must use gconf-editor, choose apps/ekiga/general/nat. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 15 14:50:15 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 15 Sep 2010 16:50:15 +0200 Subject: [Ekiga-list] ekiga from git fails to build with opal from svn In-Reply-To: <20100915140450.GA19689@mail> References: <20100915140450.GA19689@mail> Message-ID: <4C90DD27.1000901@pu-pm.univ-fcomte.fr> On 15/09/10 16:04, Nezmer wrote: > Hi, > > I wanted to test the H264 fixes committed lately to opal. But > unfortunately ekiga (release and from git) fails to build with opal from > svn. > > I can see there is not much going on in ekiga's git repo. But I hope someone > can look into this. > > Here is the build error If someone is interested: > > CXX opal-call.lo > /usr/include/opal/opal/connection.h: In member function ?virtual void > Opal::Call::toggle_hold()?: We have decided that ekiga git be used with ptlib/opal stable branch, see http://wiki.ekiga.org/index.php/Download_Ekiga_sources If you need to use ptlib/opal svn, you can fix that compilation error by reverting http://git.gnome.org/browse/ekiga/commit/?id=b1f97c6b5a. -- Eugen From brandon at burn.net Wed Sep 15 17:15:29 2010 From: brandon at burn.net (Brandon Applegate) Date: Wed, 15 Sep 2010 13:15:29 -0400 (EDT) Subject: [Ekiga-list] Multiple network interfaces/INVITES == 503 error Message-ID: Using Ekiga 3.2.6 (Ubuntu). I see that there was some previous discussion / work around this. In summary, it seems Ekiga can have issues when there are multiple active network interfaces. https://bugzilla.gnome.org/show_bug.cgi?id=587504 http://www.mail-archive.com/ekiga-list at gnome.org/msg05088.html I am using Ekiga primarily with our Cisco Callmanager at work. When I am in the office, and have a single active interface, Ekiga works great (I really like it ! :)). When I am VPN'ed into work, I have 2 'active' network interfaces - my 'lan' and my 'vpn'. Using wireshark I see that Ekiga sends INVITES using both addresses embedded. This seems to tie the Cisco side in a knot, and it gives me a 503 'Unable to find device handler...' whenever I try to make a call. So my question is, is there anything I can do ? I also see messages that seem to indicate that something related to this issue had been fixed in Ekiga. I'm currently using Twinkle while on VPN. Thanks for any info. -- Brandon Applegate - CCIE 10273 PGP Key fingerprint: 7407 DC86 AA7B A57F 62D1 A715 3C63 66A1 181E 6996 "SH1-0151. This is the serial number, of our orbital gun." From rowens at ptd.net Wed Sep 15 23:45:04 2010 From: rowens at ptd.net (Rob Owens) Date: Wed, 15 Sep 2010 19:45:04 -0400 Subject: [Ekiga-list] best option for private conference calling Message-ID: <20100915234504.GA28699@aurora.owens.net> I've tried using ekiga.net's private conference rooms, but they don't work. What is the best way for me to hold a private conference with several (10-20) participants? -Rob From arcfide at sacrideo.us Thu Sep 16 00:56:28 2010 From: arcfide at sacrideo.us (arcfide at sacrideo.us) Date: Wed, 15 Sep 2010 20:56:28 -0400 Subject: [Ekiga-list] Problems with CallCentric and DTMF/RFC Message-ID: <31cea525e1fb76a34a134eab4eeba364@sacrideo.us> Hey Everyone, I am running Ekiga 3.2.7 with an SIP CallCentric account. Everything seems to work fairly well right now, but the DTMF feature doesn't seem to work. CallCentric supports only RFC2833 or Inline DTMF, and Ekiga only supports INFO or RFC2833 protocols. For some reason DTMF doesn't work with Ekiga and RFC2833. I have tried with other softphones and the tones seem to work with CallCentric + RFC2833, but Ekiga doesn't seem to work right. Is there something I can do about this? Is this a known problem? Aaron W. Hsu From kotnees at gmail.com Thu Sep 16 07:58:11 2010 From: kotnees at gmail.com (Karthikeyan Kotnees) Date: Thu, 16 Sep 2010 13:28:11 +0530 Subject: [Ekiga-list] UNABLE TO MAKE A BASIC H.323 Basic call - Ekiga to Ekiga Message-ID: Dear Ekiga Users, I am unable to make a basic H.323 call between two Ekiga phones. Ekiga--------------------H323----------------Ekiga The Terminating Ekiga always responds with Release complete after sending call proceding. Am I missing something in config.I Tried all combinations in preferences. Regds karthikeyan -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 16 08:31:53 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 16 Sep 2010 10:31:53 +0200 Subject: [Ekiga-list] UNABLE TO MAKE A BASIC H.323 Basic call - Ekiga to Ekiga In-Reply-To: References: Message-ID: <4C91D5F9.8030004@pu-pm.univ-fcomte.fr> On 16/09/10 09:58, Karthikeyan Kotnees wrote: > Dear Ekiga Users, > > I am unable to make a basic H.323 call between two Ekiga phones. > > Ekiga--------------------H323----------------Ekiga > > The Terminating Ekiga always responds with Release complete after sending > call proceding. > > Am I missing something in config.I Tried all combinations in preferences. Indeed, it seems there are problems with H323, see bugzilla. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 16 09:15:01 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 16 Sep 2010 11:15:01 +0200 Subject: [Ekiga-list] best option for private conference calling In-Reply-To: <20100915234504.GA28699@aurora.owens.net> References: <20100915234504.GA28699@aurora.owens.net> Message-ID: <4C91E015.6020106@pu-pm.univ-fcomte.fr> On 16/09/10 01:45, Rob Owens wrote: > I've tried using ekiga.net's private conference rooms, but they don't > work. What is the best way for me to hold a private conference with > several (10-20) participants? I have no idea, sorry. -- Eugen From kotnees at gmail.com Thu Sep 16 11:05:57 2010 From: kotnees at gmail.com (Karthikeyan Kotnees) Date: Thu, 16 Sep 2010 16:35:57 +0530 Subject: [Ekiga-list] UNABLE TO MAKE A BASIC H.323 Basic call - Ekiga to Ekiga In-Reply-To: <4C91D5F9.8030004@pu-pm.univ-fcomte.fr> References: <4C91D5F9.8030004@pu-pm.univ-fcomte.fr> Message-ID: Which version of Ekiga works perfect for H323 On Thu, Sep 16, 2010 at 2:01 PM, Eugen Dedu wrote: > On 16/09/10 09:58, Karthikeyan Kotnees wrote: > >> Dear Ekiga Users, >> >> I am unable to make a basic H.323 call between two Ekiga phones. >> >> Ekiga--------------------H323----------------Ekiga >> >> The Terminating Ekiga always responds with Release complete after sending >> call proceding. >> >> Am I missing something in config.I Tried all combinations in preferences. >> > > Indeed, it seems there are problems with H323, see bugzilla. > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Thu Sep 16 11:08:25 2010 From: michel.memeteau at gmail.com (michel memeteau) Date: Thu, 16 Sep 2010 13:08:25 +0200 Subject: [Ekiga-list] best option for private conference calling In-Reply-To: <4C91E015.6020106@pu-pm.univ-fcomte.fr> References: <20100915234504.GA28699@aurora.owens.net> <4C91E015.6020106@pu-pm.univ-fcomte.fr> Message-ID: try http://www.freeconferencecall.com/ 2010/9/16 Eugen Dedu > On 16/09/10 01:45, Rob Owens wrote: > >> I've tried using ekiga.net's private conference rooms, but they don't >> work. What is the best way for me to hold a private conference with >> several (10-20) participants? >> > > I have no idea, sorry. > > -- > Eugen > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- <-------------------------------------------------------> web perso : http://memeteau.com Boutique Ordinateurs GNU/Linux : http://shop.ekimia.fr Fixe : 0974763294 Mobile : 0624808051 Visio/jabber/GTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 16 17:18:53 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 16 Sep 2010 19:18:53 +0200 Subject: [Ekiga-list] UNABLE TO MAKE A BASIC H.323 Basic call - Ekiga to Ekiga In-Reply-To: References: <4C91D5F9.8030004@pu-pm.univ-fcomte.fr> Message-ID: <4C92517D.3000105@pu-pm.univ-fcomte.fr> I do not know, I do not use H323. Maybe 3.0.x? On 16/09/10 13:05, Karthikeyan Kotnees wrote: > Which version of Ekiga works perfect for H323 > > > > On Thu, Sep 16, 2010 at 2:01 PM, Eugen Dedu> wrote: > >> On 16/09/10 09:58, Karthikeyan Kotnees wrote: >> >>> Dear Ekiga Users, >>> >>> I am unable to make a basic H.323 call between two Ekiga phones. >>> >>> Ekiga--------------------H323----------------Ekiga >>> >>> The Terminating Ekiga always responds with Release complete after sending >>> call proceding. >>> >>> Am I missing something in config.I Tried all combinations in preferences. >>> >> >> Indeed, it seems there are problems with H323, see bugzilla. >> >> -- >> Eugen >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From rowens at ptd.net Thu Sep 16 20:36:17 2010 From: rowens at ptd.net (Rob Owens) Date: Thu, 16 Sep 2010 16:36:17 -0400 Subject: [Ekiga-list] best option for private conference calling In-Reply-To: References: <20100915234504.GA28699@aurora.owens.net> <4C91E015.6020106@pu-pm.univ-fcomte.fr> Message-ID: <20100916203617.GC6654@aurora.owens.net> Thanks, I'll look into that. If anybody else has an idea, let me know. -Rob On Thu, Sep 16, 2010 at 01:08:25PM +0200, michel memeteau wrote: > try http://www.freeconferencecall.com/ > > 2010/9/16 Eugen Dedu > > > On 16/09/10 01:45, Rob Owens wrote: > > > >> I've tried using ekiga.net's private conference rooms, but they don't > >> work. What is the best way for me to hold a private conference with > >> several (10-20) participants? > >> > > > > I have no idea, sorry. > > > > -- > > Eugen > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > -- > <-------------------------------------------------------> > web perso : http://memeteau.com > Boutique Ordinateurs GNU/Linux : http://shop.ekimia.fr > Fixe : 0974763294 Mobile : 0624808051 > Visio/jabber/GTalk : xmpp:freechelmi at jabber.fr > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From adamecra at seznam.cz Fri Sep 17 17:43:35 2010 From: adamecra at seznam.cz (adamecra at seznam.cz) Date: Fri, 17 Sep 2010 19:43:35 +0200 (CEST) Subject: [Ekiga-list] (no subject) Message-ID: <550.258.587-16279-349404496-1284745415@seznam.cz> don't spam me pls From jpuydt at free.fr Fri Sep 17 18:14:46 2010 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 17 Sep 2010 20:14:46 +0200 Subject: [Ekiga-list] (no subject) In-Reply-To: <550.258.587-16279-349404496-1284745415@seznam.cz> References: <550.258.587-16279-349404496-1284745415@seznam.cz> Message-ID: <4C93B016.5070307@free.fr> Le 17/09/2010 19:43, adamecra at seznam.cz a ?crit : > don't spam me pls > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > 1. you're the one who subscribed ; 2. each and every message to the list ends with information on how to unsubscribe. You know what to do, Snark on #ekiga From elgitanito at gmx.net Sat Sep 18 09:14:18 2010 From: elgitanito at gmx.net (elgitanito at gmx.net) Date: Sat, 18 Sep 2010 11:14:18 +0200 Subject: [Ekiga-list] Problems while being connected Message-ID: <20100918091418.289220@gmx.net> Hi Folks, the description of 3 problems in as few words as possible: PC A: openSUSE 11.2, Ekiga 3.2.6, connected via WLAN to www PC B: openSUSE 11.1, Ekiga 3.0.1, connected via LAN to www Neither A nor B use video functionality. -Ekiga can be started on A and B without problems -Both users can connect with Ekiga Server -Both users can perform the echotest without problems (so, everything should be installed well and should work fine) -Messaging (chat) can be performed without problems between A and B PROBLEM 1: When Calling from A to B, both users can hear the ringing-tone, but it is not possible for B to pick up the call from A (the window with the accept or reject option is not presented on B when receiving a call on B). QUESTION 1: How a call can be answered without options-box (as it is shown on A, when B calls A) on Ekiga 3.0.1. PROBLEM 2 (Main-problem): When calling from B to A, the connection can be established by pushing the accept-button within the message-box, which is presented on A (Ekiga 3.2.6) when receiving a call. But the call works only in one direction: B can hear A speaking, but A can`t hear B speaking. QUESTION 2: What is going wrong here ? Problem 3: When B connects to Ekiga-Server, A is informed about the presence of B on the net. B does not receive any information about the presence of A on the net. QUESTION 3: Does version 3.0.1 of Ekiga not contain this functionality ? We don`t have any idea where to search for the problem. As the echotests and the messaging works without problems, we do not expect any problems with own hard/soft/ware or server connection. Any Ideas ? Thanks a lot in advance and greetings from Germany Rafa -- GRATIS: Spider-Man 1-3 sowie 300 weitere Videos! Jetzt freischalten! http://portal.gmx.net/de/go/maxdome From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Sep 18 13:24:52 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 18 Sep 2010 15:24:52 +0200 Subject: [Ekiga-list] Problems while being connected In-Reply-To: <20100918091418.289220@gmx.net> References: <20100918091418.289220@gmx.net> Message-ID: <4C94BDA4.70507@pu-pm.univ-fcomte.fr> On 18/09/10 11:14, elgitanito at gmx.net wrote: > Hi Folks, > > the description of 3 problems in as few words as possible: > > PC A: openSUSE 11.2, Ekiga 3.2.6, connected via WLAN to www > PC B: openSUSE 11.1, Ekiga 3.0.1, connected via LAN to www You mean to Internet, not to www... > Neither A nor B use video functionality. > > -Ekiga can be started on A and B without problems > -Both users can connect with Ekiga Server > -Both users can perform the echotest without problems (so, everything should be installed well and should work fine) > -Messaging (chat) can be performed without problems between A and B > > PROBLEM 1: When Calling from A to B, both users can hear the ringing-tone, but it is not possible for B to pick up the call from A (the window with the accept or reject option is not presented on B when receiving a call on B). QUESTION 1: How a call can be answered without options-box (as it is shown on A, when B calls A) on Ekiga 3.0.1. It is not normal that B does not show the call dialog box. Are A and B on the same LAN? If yes, do you use Neighbours tab when calling (better) or do you pass through ekiga.net? Otherwise, you need to send us the -d 4 output. Answering automatically a call is called auto-answering, and it is available in the not-yet-released 3.4 series, see http://wiki.ekiga.org/index.php/Features#Call > PROBLEM 2 (Main-problem): When calling from B to A, the connection can be established by pushing the accept-button within the message-box, which is presented on A (Ekiga 3.2.6) when receiving a call. But the call works only in one direction: B can hear A speaking, but A can`t hear B speaking. QUESTION 2: What is going wrong here ? Try removing a few unused codecs on both machines, for ex. all the video codecs. See http://wiki.ekiga.org/index.php/Troubleshooting#I_hear_the_ring.2C_but_the_communication_is_not_established. If still does not help, send us the -d 4 output. > Problem 3: When B connects to Ekiga-Server, A is informed about the presence of B on the net. B does not receive any information about the presence of A on the net. QUESTION 3: Does version 3.0.1 of Ekiga not contain this functionality ? I looked at NEWS file, there is nothing about that. I do not remember anything about that, so I do not know if there is a problem or not in 3.0.1. Send us the -d 4 output on B. (I am sure that A sends its presence information to ekiga.net.) > We don`t have any idea where to search for the problem. As the echotests and the messaging works without problems, we do not expect any problems with own hard/soft/ware or server connection. I think you are right. > Any Ideas ? Thanks a lot in advance and greetings from Germany And from France :o) -- Eugen From elgitanito at gmx.net Sat Sep 18 14:11:13 2010 From: elgitanito at gmx.net (Ralf Kunze) Date: Sat, 18 Sep 2010 16:11:13 +0200 Subject: [Ekiga-list] Problems while being connected In-Reply-To: <4C94BDA4.70507@pu-pm.univ-fcomte.fr> References: <20100918091418.289220@gmx.net> <4C94BDA4.70507@pu-pm.univ-fcomte.fr> Message-ID: <20100918141113.162310@gmx.net> > On 18/09/10 11:14, elgitanito at gmx.net wrote: > > Hi Folks, > > > > the description of 3 problems in as few words as possible: > > > > PC A: openSUSE 11.2, Ekiga 3.2.6, connected via WLAN to www > > PC B: openSUSE 11.1, Ekiga 3.0.1, connected via LAN to www > > You mean to Internet, not to www... Sorry, you are right :-) Connected to Internet, or better to ekiga.net > > > Neither A nor B use video functionality. > > > > -Ekiga can be started on A and B without problems > > -Both users can connect with Ekiga Server > > -Both users can perform the echotest without problems (so, everything > should be installed well and should work fine) > > -Messaging (chat) can be performed without problems between A and B > > > > PROBLEM 1: When Calling from A to B, both users can hear the > ringing-tone, but it is not possible for B to pick up the call from A (the window with > the accept or reject option is not presented on B when receiving a call on > B). QUESTION 1: How a call can be answered without options-box (as it is > shown on A, when B calls A) on Ekiga 3.0.1. > > It is not normal that B does not show the call dialog box. Are A and B > on the same LAN? If yes, do you use Neighbours tab when calling > (better) or do you pass through ekiga.net? Otherwise, you need to send > us the -d 4 output. Answering automatically a call is called > auto-answering, and it is available in the not-yet-released 3.4 series, > see http://wiki.ekiga.org/index.php/Features#Call No, this effect didn`t take place within the same LAN but in different locations with 60km distance between. > > > PROBLEM 2 (Main-problem): When calling from B to A, the connection can > be established by pushing the accept-button within the message-box, which is > presented on A (Ekiga 3.2.6) when receiving a call. But the call works > only in one direction: B can hear A speaking, but A can`t hear B speaking. > QUESTION 2: What is going wrong here ? > > Try removing a few unused codecs on both machines, for ex. all the video > codecs. See > http://wiki.ekiga.org/index.php/Troubleshooting#I_hear_the_ring.2C_but_the_communication_is_not_established. > If still does not help, send us the -d 4 output. > OK, within the next 2 or 3 days we`ll be able to test the communication with less codecs selected again, then I`ll send you the -d 4 traces of both machines. Am I right in thinking of starting ekiga within a terminal-window with the - d 4 option and sending you the terminal-trace ? Then there will be quiet large files for you to read... > > Problem 3: When B connects to Ekiga-Server, A is informed about the > presence of B on the net. B does not receive any information about the presence > of A on the net. QUESTION 3: Does version 3.0.1 of Ekiga not contain this > functionality ? > > I looked at NEWS file, there is nothing about that. I do not remember > anything about that, so I do not know if there is a problem or not in > 3.0.1. Send us the -d 4 output on B. (I am sure that A sends its > presence information to ekiga.net.) Ok, will be done within the next 2 or 3 days. So far, thanks for that quick reply and I wish a nice weekend to the french expert. Greetings, Rafa -- GMX DSL SOMMER-SPECIAL: Surf & Phone Flat 16.000 f?r nur 19,99 Euro/mtl.!* http://portal.gmx.net/de/go/dsl From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Sep 18 18:23:10 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 18 Sep 2010 20:23:10 +0200 Subject: [Ekiga-list] Problems while being connected In-Reply-To: <20100918141113.162310@gmx.net> References: <20100918091418.289220@gmx.net> <4C94BDA4.70507@pu-pm.univ-fcomte.fr> <20100918141113.162310@gmx.net> Message-ID: <4C95038E.3090006@pu-pm.univ-fcomte.fr> On 18/09/10 16:11, Ralf Kunze wrote: >> On 18/09/10 11:14, elgitanito at gmx.net wrote: > OK, within the next 2 or 3 days we`ll be able to test the communication with less codecs selected again, then I`ll send you the -d 4 traces of both machines. Am I right in thinking of starting ekiga within a terminal-window with the - d 4 option and sending you the terminal-trace ? Then there will be quiet large files for you to read... You need to compress them or put them on www, see wiki. Do not worry, we read very fast :o) From mikehalmarack at gmail.com Sun Sep 19 13:45:05 2010 From: mikehalmarack at gmail.com (Mike Halmarack) Date: Sun, 19 Sep 2010 14:45:05 +0100 Subject: [Ekiga-list] Creative Webcam NX not working in Ekiga for Windows? Message-ID: I can't get my Creative Webcam NX to work in the Windows version of Ekiga 3.2.7 There are three Creative Webcam NX options available in Edit>Preferences>Video>Devices>Input Device and none of them enable the showing of video in the call panel. The 2 alternative Creative Webcam NX options cause error messages when they're chosen. I did a search of the list archive for similar problems and saw it suggested that the user select: Preferences>Video> V4L2 or V4L These choices aren't available in the Windows prefs. Nor are there any mentions of V4L2 or V4L in any of the files associated with the application. Maybe these options only apply to the Linux platform. Can anyone please tell me how I might fix this, or alternatively can someone recommend a Webcam that will work with the Windows version of Ekiga? -- Regards, Mike Halmarack -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Sep 20 08:12:36 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 20 Sep 2010 10:12:36 +0200 Subject: [Ekiga-list] Creative Webcam NX not working in Ekiga for Windows? In-Reply-To: References: Message-ID: <4C971774.4070503@pu-pm.univ-fcomte.fr> On 19/09/10 15:45, Mike Halmarack wrote: > I can't get my Creative Webcam NX to work in the Windows version of Ekiga > 3.2.7 > There are three Creative Webcam NX options available in > Edit>Preferences>Video>Devices>Input Device > and none of them enable the showing of video in the call panel. The 2 > alternative Creative Webcam NX options cause error messages when they're > chosen. Please choose the option which had not generate an error. Quit ekiga and restart it, and tell if the images are shown. If not, please restart ekiga with -d 4 and give us the output (http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2). > I did a search of the list archive for similar problems and saw it suggested > that the user select: > Preferences>Video> V4L2 or V4L > These choices aren't available in the Windows prefs. Nor are there any > mentions of V4L2 or V4L in any of the files associated with the application. > Maybe these options only apply to the Linux platform. Indeed. > Can anyone please tell me how I might fix this, or alternatively can someone > recommend a Webcam that will work with the Windows version of Ekiga? -- Eugen From support at 7dfx.com Mon Sep 20 13:50:44 2010 From: support at 7dfx.com (support7dfx) Date: Mon, 20 Sep 2010 06:50:44 -0700 (PDT) Subject: [Ekiga-list] Ekiga keeps crashing on windows + magicjack Message-ID: <1284990644374-2547013.post@n4.nabble.com> Hi, we were using magicjack for a while at our business but recently switched to a trixbox server and now want to ditch MJ and use a unified softphone. On linux ubuntu 10.04, my ekiga keeps crashing from time to time and i can't make it work so i use twinkle and everything is fine. My partner on the other hand, is tryng all the softphone of the world on his machine and ekiga is the only one that seems to work for outgoing calls. All income calls make Ekiga crash all the time. (We tried, ekiga, x-lite and a few other top of the list phone app for windows) We discovered later that MJ seems to hook something in the system, so when doing our tests, we unplug MJ and restart the computer and outgoing works fine. But all incoming fails miserably. Any queues to help me trouble shoot this? -- View this message in context: http://ekiga.1756082.n4.nabble.com/Ekiga-keeps-crashing-on-windows-magicjack-tp2547013p2547013.html Sent from the Ekiga General mailing list archive at Nabble.com. From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Sep 20 13:55:08 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 20 Sep 2010 15:55:08 +0200 Subject: [Ekiga-list] Ekiga keeps crashing on windows + magicjack In-Reply-To: <1284990644374-2547013.post@n4.nabble.com> References: <1284990644374-2547013.post@n4.nabble.com> Message-ID: <4C9767BC.1000404@pu-pm.univ-fcomte.fr> On 20/09/10 15:50, support7dfx wrote: > > Hi, we were using magicjack for a while at our business but recently switched > to a trixbox server and now want to ditch MJ and use a unified softphone. > > On linux ubuntu 10.04, my ekiga keeps crashing from time to time and i can't > make it work so i use twinkle and everything is fine. > > My partner on the other hand, is tryng all the softphone of the world on his > machine and ekiga is the only one that seems to work for outgoing calls. All > income calls make Ekiga crash all the time. (We tried, ekiga, x-lite and a > few other top of the list phone app for windows) > > We discovered later that MJ seems to hook something in the system, so when > doing our tests, we unplug MJ and restart the computer and outgoing works > fine. But all incoming fails miserably. You need to send us a gdb output for the crash, see wiki Web site. -- Eugen From mikehalmarack at gmail.com Mon Sep 20 18:05:56 2010 From: mikehalmarack at gmail.com (Mike Halmarack) Date: Mon, 20 Sep 2010 19:05:56 +0100 Subject: [Ekiga-list] Creative Webcam NX not working in Ekiga for Windows? In-Reply-To: <4C971774.4070503@pu-pm.univ-fcomte.fr> References: <4C971774.4070503@pu-pm.univ-fcomte.fr> Message-ID: Hi Eugen, thanks for the advice. Here's the debug output link. http://pastebin.ca/1945257 Regards, Mike On Mon, Sep 20, 2010 at 9:12 AM, Eugen Dedu wrote: > On 19/09/10 15:45, Mike Halmarack wrote: > >> I can't get my Creative Webcam NX to work in the Windows version of Ekiga >> 3.2.7 >> There are three Creative Webcam NX options available in >> Edit>Preferences>Video>Devices>Input Device >> and none of them enable the showing of video in the call panel. The 2 >> alternative Creative Webcam NX options cause error messages when they're >> chosen. >> > > Please choose the option which had not generate an error. Quit ekiga and > restart it, and tell if the images are shown. > > If not, please restart ekiga with -d 4 and give us the output ( > http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2 > ). > > > I did a search of the list archive for similar problems and saw it >> suggested >> that the user select: >> Preferences>Video> V4L2 or V4L >> These choices aren't available in the Windows prefs. Nor are there any >> mentions of V4L2 or V4L in any of the files associated with the >> application. >> Maybe these options only apply to the Linux platform. >> > > Indeed. > > > Can anyone please tell me how I might fix this, or alternatively can >> someone >> recommend a Webcam that will work with the Windows version of Ekiga? >> > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Regards, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: From jacobo.urdiales at gmail.com Wed Sep 22 20:43:30 2010 From: jacobo.urdiales at gmail.com (Jacobo Urdiales) Date: Wed, 22 Sep 2010 22:43:30 +0200 Subject: [Ekiga-list] video h263/h264 in ubuntu Message-ID: <4C9A6A72.3020003@gmail.com> Hello everybody! I am a very happy ubuntu user. Nowadays I use the 10.04 Lucid version and would like to use my webcam to transfer video using SIP and H263. I noticed the though ekiga supports it in linux we need to install the mp4 libraries in order for ekiga to recognise them. So I installed ffmpeg and libopal (using the debian repositories for installing ekiga it also downloads the latest libopal...) but still only appears h261 and thedora. Also tried to download the source, tried to build on my system but still keeps on asking for dependancies issues ... The point is, does it really support h26-3/4? Wich is the way to get those codecs in ubuntu? Waiting for your answer and thank you in advance, Jacobo Urdiales -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 23 07:39:22 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 23 Sep 2010 09:39:22 +0200 Subject: [Ekiga-list] video h263/h264 in ubuntu In-Reply-To: <4C9A6A72.3020003@gmail.com> References: <4C9A6A72.3020003@gmail.com> Message-ID: <4C9B042A.6030708@pu-pm.univ-fcomte.fr> On 22/09/10 22:43, Jacobo Urdiales wrote: > > Hello everybody! > I am a very happy ubuntu user. Nowadays I use the 10.04 Lucid version > and would like to use my webcam to transfer video using SIP and H263. > I noticed the though ekiga supports it in linux we need to install the > mp4 libraries in order for ekiga to recognise them. > So I installed ffmpeg and libopal (using the debian repositories for > installing ekiga it also downloads the latest libopal...) but still only > appears h261 and thedora. > Also tried to download the source, tried to build on my system but still > keeps on asking for dependancies issues ... > > The point is, does it really support h26-3/4? > Wich is the way to get those codecs in ubuntu? Since about one year, these two codecs do not work in ekiga anymore, as shown in bugzilla and various e-mails in mailing lists. I advise you to install ffmpeg from say April 2009 and compile opal and ekiga with it, it should work. -- Eugen From email_anfrage at web.de Thu Sep 23 10:08:24 2010 From: email_anfrage at web.de (email_anfrage at web.de) Date: Thu, 23 Sep 2010 12:08:24 +0200 Subject: [Ekiga-list] how to make the size of the main window permanent? Message-ID: <4C9B2718.90903@web.de> Hello. Is there a possibility to make the size of the ekiga main window permanent? Almost every time I make a call and hang up, the size of the window changes, so I have to readjust it. It's a bit annoying. greetings john From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 23 10:17:14 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 23 Sep 2010 12:17:14 +0200 Subject: [Ekiga-list] how to make the size of the main window permanent? In-Reply-To: <4C9B2718.90903@web.de> References: <4C9B2718.90903@web.de> Message-ID: <4C9B292A.6010307@pu-pm.univ-fcomte.fr> On 23/09/10 12:08, email_anfrage at web.de wrote: > Hello. > > Is there a possibility to make the size of the ekiga main window permanent? Almost every time I make a call and hang up, the size of the window changes, so I have to readjust it. It's a bit annoying. Nope. Please comment on https://bugzilla.gnome.org/show_bug.cgi?id=592866, hoping someone will fix it. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 23 12:26:56 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 23 Sep 2010 14:26:56 +0200 Subject: [Ekiga-list] Problems with CallCentric and DTMF/RFC In-Reply-To: <31cea525e1fb76a34a134eab4eeba364@sacrideo.us> References: <31cea525e1fb76a34a134eab4eeba364@sacrideo.us> Message-ID: <4C9B4790.2050902@pu-pm.univ-fcomte.fr> On 16/09/10 02:56, arcfide at sacrideo.us wrote: > Hey Everyone, > > I am running Ekiga 3.2.7 with an SIP CallCentric account. Everything > seems to work fairly well right now, but the DTMF feature doesn't seem to > work. CallCentric supports only RFC2833 or Inline DTMF, and Ekiga only > supports INFO or RFC2833 protocols. For some reason DTMF doesn't work > with Ekiga and RFC2833. I have tried with other softphones and the tones > seem to work with CallCentric + RFC2833, but Ekiga doesn't seem to work > right. Is there something I can do about this? Is this a known problem? In Ekiga <= 3.2.7, RFC2833 and Info are exchanged. This was later fixed with http://git.gnome.org/browse/ekiga/commit/?id=d5abac28. Does it work by using Info instead of RFC2833? -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 23 13:23:24 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 23 Sep 2010 15:23:24 +0200 Subject: [Ekiga-list] Citrix HDX Ready In-Reply-To: References: Message-ID: <4C9B54CC.5090005@pu-pm.univ-fcomte.fr> On 07/09/10 07:42, Martin B?rard wrote: > We are very impressed with Ekiga and wish to use it and deploy it into our Citrix XenApp Farm. I know the current Windows version is in beta but anyone knows why I,m unable to use Citrix HDX Webcam redirection? Sorry to answer so late. What is Citrix HDX and Webcam redirection? -- Eugen From a1pacis at yahoo.com Thu Sep 23 13:47:50 2010 From: a1pacis at yahoo.com (Santiago Jr Pacis) Date: Thu, 23 Sep 2010 06:47:50 -0700 (PDT) Subject: [Ekiga-list] ekiga chat for LAN users Message-ID: <860305.49145.qm@web56604.mail.re3.yahoo.com> Good pm, Thank you for providing us with ekiga. I am using it now in my communication to my family. However, in our office set up wherein we used the IP PBX, we cannot activate the chat for computer to computer inside the LAN. We are using 8ix zenith software for our PBX which has a platform of Asterisk. Can you help us on how to activate the chat with ekiga 3.2.7 inside our LAN Again, thank you -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: --static--liam_crowdsurfer_bottom.gif Type: image/gif Size: 21362 bytes Desc: not available URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 23 13:52:07 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 23 Sep 2010 15:52:07 +0200 Subject: [Ekiga-list] ekiga chat for LAN users In-Reply-To: <860305.49145.qm@web56604.mail.re3.yahoo.com> References: <860305.49145.qm@web56604.mail.re3.yahoo.com> Message-ID: <4C9B5B87.5090104@pu-pm.univ-fcomte.fr> On 23/09/10 15:47, Santiago Jr Pacis wrote: > > Good pm, > > Thank you for providing us with ekiga. I am using it now in my communication to > my family. > However, in our office set up wherein we used the IP PBX, we cannot activate the > chat for computer to computer inside the LAN. We are using 8ix zenith software > for our PBX which has a platform of Asterisk. Can you help us on how to activate > the chat with ekiga 3.2.7 inside our LAN Neighbours (call and/or chat) does not work on Windows version of ekiga. If chat does not work on linux for you, send us a -d 4 output from both machines (chat sender and chat receiver). -- Eugen From psikomo at gmail.com Thu Sep 23 14:14:34 2010 From: psikomo at gmail.com (pablo de la fuente) Date: Thu, 23 Sep 2010 16:14:34 +0200 Subject: [Ekiga-list] video h263/h264 in ubuntu In-Reply-To: <4C9B042A.6030708@pu-pm.univ-fcomte.fr> References: <4C9A6A72.3020003@gmail.com> <4C9B042A.6030708@pu-pm.univ-fcomte.fr> Message-ID: Hi Eugen, I had the same problem. I solved it downloading the sources of OPAL, PTLIB and ffmpeg. I followed this way and works. Check this links: http://wiki.ekiga.org/index.php/Compiling_Ekiga#H.264.2C_MPEG4_Part_2_and_H.263.2B_.2F_H.263-1998_using_debian_prebuild_binaries_.28maybe_working_for_UBUNTU.2C_too.29 (you can see what dependences are necessaries) For ffmpeg: ./configure --enable-shared make sudo make install For ptlib: ./configure make sudo make install For OPAL ./configure make sudo make install and for ekiga ./configure make sudo make install I have a philips web-cam on Ubuntu 10.04 with Ekiga and works fine. I'm using this versions: Ekiga 3.2.7 OPAL 3.6.8 PTLIB 2.6.7 And in Ekiga Edit->Preferences->Video->Codecs I can see h263 option. I hope help you. Regards Pablo. On Thu, Sep 23, 2010 at 9:39 AM, Eugen Dedu wrote: > On 22/09/10 22:43, Jacobo Urdiales wrote: > >> >> Hello everybody! >> I am a very happy ubuntu user. Nowadays I use the 10.04 Lucid version >> and would like to use my webcam to transfer video using SIP and H263. >> I noticed the though ekiga supports it in linux we need to install the >> mp4 libraries in order for ekiga to recognise them. >> So I installed ffmpeg and libopal (using the debian repositories for >> installing ekiga it also downloads the latest libopal...) but still only >> appears h261 and thedora. >> Also tried to download the source, tried to build on my system but still >> keeps on asking for dependancies issues ... >> >> The point is, does it really support h26-3/4? >> Wich is the way to get those codecs in ubuntu? >> > > Since about one year, these two codecs do not work in ekiga anymore, as > shown in bugzilla and various e-mails in mailing lists. > > I advise you to install ffmpeg from say April 2009 and compile opal and > ekiga with it, it should work. > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From cavenel at gmail.com Thu Sep 23 14:27:39 2010 From: cavenel at gmail.com (Christophe Avenel) Date: Thu, 23 Sep 2010 16:27:39 +0200 Subject: [Ekiga-list] SIP impossible from my new appartment Message-ID: Hello everybody! I was using SIP with Ekiga without a problem until last week. I am right now in a new place, and I don't know how to parametrize Ekiga. Unfortunately, I don't have the control on the router, as I am not the owner of the place... My ISP is JazzTel (a Spanish one) and I heard that there was a problem with it. I send you a -d 4 output: I can't understand a single line... Maybe you can help me to know where exactly is the problem and how I can resolve it. Thank you in advance, -- Christophe PS: here are some informations on SIP and jazztel, in spanish: http://bandaancha.eu/tema/1657400/jazztel-bloquea-voip http://www.adslayuda.com/foro/proveedores-servicios-adsl/jazztel/protocolos-capados-en-jazztel-t61564.html http://www.adslzone.net/posts216228-0.html From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 23 14:29:24 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 23 Sep 2010 16:29:24 +0200 Subject: [Ekiga-list] video h263/h264 in ubuntu In-Reply-To: References: <4C9A6A72.3020003@gmail.com> <4C9B042A.6030708@pu-pm.univ-fcomte.fr> Message-ID: <4C9B6444.2080804@pu-pm.univ-fcomte.fr> On 23/09/10 16:14, pablo de la fuente wrote: > Hi Eugen, > > I had the same problem. > I solved it downloading the sources of OPAL, PTLIB and ffmpeg. I followed > this way and works. > > Check this links: > http://wiki.ekiga.org/index.php/Compiling_Ekiga#H.264.2C_MPEG4_Part_2_and_H.263.2B_.2F_H.263-1998_using_debian_prebuild_binaries_.28maybe_working_for_UBUNTU.2C_too.29 > (you can see what dependences are necessaries) This page is for latest version of ffmpeg, which is known not to work with ekiga, see below. Maybe this page should be updated... > For ffmpeg: > > > ./configure --enable-shared > make > sudo make install > > > For ptlib: > > > ./configure > make > sudo make install > > > For OPAL > > > ./configure > make > sudo make install > > > and for ekiga > > > ./configure > make > sudo make install > > > > > I have a philips web-cam on Ubuntu 10.04 with Ekiga and works fine. > > I'm using this versions: > > Ekiga 3.2.7 > OPAL 3.6.8 > PTLIB 2.6.7 > > And in Ekiga Edit->Preferences->Video->Codecs I can see h263 option. Yes, but doesn't it crash? Try calling 500 with H263 as video codec... > I hope help you. > > Regards > Pablo. > > On Thu, Sep 23, 2010 at 9:39 AM, Eugen Dedu> wrote: > >> On 22/09/10 22:43, Jacobo Urdiales wrote: >> >>> >>> Hello everybody! >>> I am a very happy ubuntu user. Nowadays I use the 10.04 Lucid version >>> and would like to use my webcam to transfer video using SIP and H263. >>> I noticed the though ekiga supports it in linux we need to install the >>> mp4 libraries in order for ekiga to recognise them. >>> So I installed ffmpeg and libopal (using the debian repositories for >>> installing ekiga it also downloads the latest libopal...) but still only >>> appears h261 and thedora. >>> Also tried to download the source, tried to build on my system but still >>> keeps on asking for dependancies issues ... >>> >>> The point is, does it really support h26-3/4? >>> Wich is the way to get those codecs in ubuntu? >>> >> >> Since about one year, these two codecs do not work in ekiga anymore, as >> shown in bugzilla and various e-mails in mailing lists. >> >> I advise you to install ffmpeg from say April 2009 and compile opal and >> ekiga with it, it should work. From rowens at ptd.net Thu Sep 23 19:18:54 2010 From: rowens at ptd.net (Rob Owens) Date: Thu, 23 Sep 2010 15:18:54 -0400 Subject: [Ekiga-list] SIP impossible from my new appartment In-Reply-To: References: Message-ID: <20100923191854.GA25033@aurora.owens.net> On Thu, Sep 23, 2010 at 04:27:39PM +0200, Christophe Avenel wrote: > Hello everybody! > > I was using SIP with Ekiga without a problem until last week. I am > right now in a new place, and I don't know how to parametrize Ekiga. > Unfortunately, I don't have the control on the router, as I am not the > owner of the place... > Try getting a sip account from iptel.org and use it with your Ekiga software. I've had better luck with NAT traversal when using the iptel account. -Rob From elgitanito at gmx.net Thu Sep 23 20:02:34 2010 From: elgitanito at gmx.net (elgitanito at gmx.net) Date: Thu, 23 Sep 2010 22:02:34 +0200 Subject: [Ekiga-list] Problems while being connected In-Reply-To: <4C95038E.3090006@pu-pm.univ-fcomte.fr> References: <20100918091418.289220@gmx.net> <4C94BDA4.70507@pu-pm.univ-fcomte.fr> <20100918141113.162310@gmx.net> <4C95038E.3090006@pu-pm.univ-fcomte.fr> Message-ID: <20100923200234.185110@gmx.net> Hi Eugen, for personal reasons I have to wait until the middle of october until having the opportunity to check the connection and to send you the trace file. Thanks up to now, Ralf -------- Original-Nachricht -------- > Datum: Sat, 18 Sep 2010 20:23:10 +0200 > Von: Eugen Dedu > An: Ekiga mailing list > Betreff: Re: [Ekiga-list] Problems while being connected > On 18/09/10 16:11, Ralf Kunze wrote: > >> On 18/09/10 11:14, elgitanito at gmx.net wrote: > > OK, within the next 2 or 3 days we`ll be able to test the communication > with less codecs selected again, then I`ll send you the -d 4 traces of both > machines. Am I right in thinking of starting ekiga within a > terminal-window with the - d 4 option and sending you the terminal-trace ? Then there > will be quiet large files for you to read... > > You need to compress them or put them on www, see wiki. Do not worry, > we read very fast :o) > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Neu: GMX De-Mail - Einfach wie E-Mail, sicher wie ein Brief! Jetzt De-Mail-Adresse reservieren: http://portal.gmx.net/de/go/demail From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Sep 24 14:32:17 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 24 Sep 2010 16:32:17 +0200 Subject: [Ekiga-list] Creative Webcam NX not working in Ekiga for Windows? In-Reply-To: References: <4C971774.4070503@pu-pm.univ-fcomte.fr> Message-ID: <4C9CB671.2060804@pu-pm.univ-fcomte.fr> Sorry, I do not see anything wrong. Does the name of your camera contain non-ASCII characters, like registered mark etc.? I see a # there, but this should not pose problem. Please create a bug report on bugzilla about this bug, so that we do not forget it. Eugen On 20/09/10 20:05, Mike Halmarack wrote: > Hi Eugen, thanks for the advice. Here's the debug output link. > > http://pastebin.ca/1945257 > > Regards, > Mike > > On Mon, Sep 20, 2010 at 9:12 AM, Eugen Dedu> wrote: > >> On 19/09/10 15:45, Mike Halmarack wrote: >> >>> I can't get my Creative Webcam NX to work in the Windows version of Ekiga >>> 3.2.7 >>> There are three Creative Webcam NX options available in >>> Edit>Preferences>Video>Devices>Input Device >>> and none of them enable the showing of video in the call panel. The 2 >>> alternative Creative Webcam NX options cause error messages when they're >>> chosen. >>> >> >> Please choose the option which had not generate an error. Quit ekiga and >> restart it, and tell if the images are shown. >> >> If not, please restart ekiga with -d 4 and give us the output ( >> http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2 >> ). >> >> >> I did a search of the list archive for similar problems and saw it >>> suggested >>> that the user select: >>> Preferences>Video> V4L2 or V4L >>> These choices aren't available in the Windows prefs. Nor are there any >>> mentions of V4L2 or V4L in any of the files associated with the >>> application. >>> Maybe these options only apply to the Linux platform. >>> >> >> Indeed. >> >> >> Can anyone please tell me how I might fix this, or alternatively can >>> someone >>> recommend a Webcam that will work with the Windows version of Ekiga? >>> >> >> -- >> Eugen From palama at inwind.it Sat Sep 25 12:40:55 2010 From: palama at inwind.it (palama at inwind.it) Date: Sat, 25 Sep 2010 14:40:55 +0200 Subject: [Ekiga-list] Ekiga.net refuses registering Twinkle In-Reply-To: <4C9CB671.2060804@pu-pm.univ-fcomte.fr> References: <4C971774.4070503@pu-pm.univ-fcomte.fr> <4C9CB671.2060804@pu-pm.univ-fcomte.fr> Message-ID: <20100925144055.4207917f.palama@inwind.it> At random occasions but at least once a day it happens that ekiga.net refuses my registration if I use twinkle 1.4.2 while it accepts registration if I use ekiga 2.0.12, same username and same password of course. Does anybody know if this the normal behaviuor of ekiga.net, maybe due to giving priority to people using ekiga, or if it is a bug? Best regards, Antonio Palam? -- From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Sep 25 13:03:14 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 25 Sep 2010 15:03:14 +0200 Subject: [Ekiga-list] Ekiga.net refuses registering Twinkle In-Reply-To: <20100925144055.4207917f.palama@inwind.it> References: <4C971774.4070503@pu-pm.univ-fcomte.fr> <4C9CB671.2060804@pu-pm.univ-fcomte.fr> <20100925144055.4207917f.palama@inwind.it> Message-ID: <4C9DF312.6080703@pu-pm.univ-fcomte.fr> On 25/09/10 14:40, palama at inwind.it wrote: > At random occasions but at least once a day it happens that ekiga.net refuses my registration if I use twinkle 1.4.2 while it accepts registration if I use ekiga 2.0.12, same username and same password of course. > Does anybody know if this the normal behaviuor of ekiga.net, maybe due to giving priority to people using ekiga, or if it is a bug? > Best regards, Hello Antonio, glad to hear from you. I think this is a bug (I do not think there is a preference on Ekiga over other clients), but as I am not admnistrator I cannot be sure. -- Eugen From thedogfarted at gmail.com Sun Sep 26 11:07:48 2010 From: thedogfarted at gmail.com (=?UTF-8?B?SsSBbmlzIFJ1a8WhxIFucw==?=) Date: Sun, 26 Sep 2010 14:07:48 +0300 Subject: [Ekiga-list] Why my ekiga is continually trying to subscribe to my contacts telephone numbers ? In-Reply-To: References: Message-ID: Hi, On Thu, Sep 9, 2010 at 12:48 PM, Javier Barroso wrote: > From ekiga -d4 logs: > 2010/09/08 16:30:34.588 32:13:29.082 ? ? Housekeeper:0xb48ffb70 SIP ? ? Set > state Terminated_Timeout for SUBSCRIBE transaction > id=z9hG4bKd43fdd4b-c3b9-df11-8850-0017a420b5ad > 2010/09/08 16:30:34.588 32:13:29.082 > Housekeeper:0xb48ffb70 ?SIP ? ? Changing SUBSCRIBE handler from Restoring > to Unavailable, target=sip:javi at xxxx, > id=8c307b3c-b5b8-df11-8850-0017a420b5ad at pepinux > 2010/09/08 16:30:34.588 32:13:29.082 > Housekeeper:0xb48ffb70 ?SIP ? ? Retrying SUBSCRIBE in 30 seconds. > 2010/09/08 16:30:34.588 32:13:29.082 ? ? Housekeeper:0xb48ffb70 SIP ? ? Set > state Terminated_Timeout for SUBSCRIBE transaction > id=z9hG4bKbe95de4b-c3b9-df11-8850-0017a420b5ad > 2010/09/08 16:30:34.589 32:13:29.082 > Housekeeper:0xb48ffb70 ?SIP ? ? Changing SUBSCRIBE handler from Unavailable > to Unavailable, target=sip:javi at xxxxx, > id=8c307b3c-b5b8-df11-8850-0017a420b5ad at pepinux > 2010/09/08 16:30:34.589 32:13:29.082 > Housekeeper:0xb48ffb70 ?SIP ? ? Retrying SUBSCRIBE in 30 seconds. > > I'm viewing this continualy in ekiga.log: > > grep "2010/09/09.*Set state Terminated_Timeout for SUBSCRIBE" > ekiga.log ?| awk '{gsub ("....$","",$2); print $2}' | uniq -c | sort > -n > ? ? 36 00:00:36 > ? ? 36 00:01:12 > ? ? 36 00:01:49 > ? ? 36 00:02:25 > ? ? 36 00:03:02 > ? ? 36 00:03:39 > ? ? 36 00:04:16 > ? ? 36 00:04:53 > .... all the time ... > ? ? 36 11:26:34 > ? ? 36 11:27:11 > ? ? 36 11:27:48 > ? ? 36 11:28:24 > ? ? 36 11:29:01 > ? ? 36 11:29:38 > ? ? 36 11:30:15 > ? ? 36 11:30:52 > ? ? 36 11:31:29 > ? ? 36 11:32:05 (the time which I'm writting this mail) > > Is it normal ? Yes, it is normal - Ekiga sends SUBSCRIBE messages to query the presence status (offline, online, away etc) of your contacts. > I'm viewing too this in wireshark capture (continuously launching SIP > SUBSCRIBE REQUEST): > ?198 ? ?6.674571 ? ? ? ?192.168.101.120 38.223.166.2 ? ?SIP ? ? Request: SUBSCRIBE sip:javi at xxxxx > 199 ? ? 6.676041 ? ? ? ?10.4.0.120 ? ? ?38.223.166.2 ? ?SIP ? ? Request: SUBSCRIBE sip:javi at xxxxxx > 202 ? ? 6.681867 ? ? ? ?192.168.101.120 38.117.97.125 ? SIP ? ? Request: SUBSCRIBE > sip:javi at yyyyyy > 203 ? ? 6.683218 ? ? ? ?10.4.0.120 ? ? ?38.117.97.125 ? SIP ? ? Request: SUBSCRIBE sip:javi at yyyyy > > I'm viewing at least 4 ips against ekiga is trying to subscribe my contacts: > 38.117.97.125, 38.223.166.2, 40.233.138.214, 39.165.13.136 > > I has only one account in my ekiga, and is to our internal asterisk. SUBSCRIBEs are sent to the server of the particular contact, not the server of your account. Those IPs should correspond to what xxxxxx and yyyyyy resolve to. Thus, if you have somecontact at ekiga.net, then the SUBSCRIBE will be sent to 86.64.162.35 (which is the IP of ekiga.net). > Can I configure ekiga to not do such things (subscribe to externals ips)? I'm not sure, but I think no, presence status can't be disabled. > Anther issue, do you know why my linux is logging as two ip different > (10.4.0.120 and 192.168.101.120) ? > > My ip route config is: > $ ip route > 10.4.0.0/24 dev br-gest ?proto kernel ?scope link ?src 10.4.0.120 > 192.168.0.0/16 dev br-lan ?proto kernel ?scope link ?src 192.168.101.120 > default via 192.168.100.1 dev br-lan > > So I don't understand why connections to 38.223.166.2 goes sometimes > with my 10.4.0.120 ip ... I could be wrong (I'm not Ekiga developer), but here's my guess. First, SIP requires the sent message to contain the IP of the interface through which it was sent (in Via header). Therefore Ekiga can't send from 0.0.0.0 and let the kernel decide the source IP. Second, Ekiga doesn't "know" which interface (and therefore source address) will be used by the kernel for packets going to 38.223.166.2. AFAIK there is no way to query it; the other way would be to reproduce the kernel routing algorithm in Ekiga, which is impossible. Therefore Ekiga sends two copies of the message - one w/ 10.4.0.120 in Via and as the source address, and the other w/ 192.168.101.120. I'm not sure about the current version of Ekiga, but in older ones it was possible to specify which interface to use. -- Ian From javibarroso at gmail.com Sun Sep 26 22:35:35 2010 From: javibarroso at gmail.com (Javier Barroso) Date: Mon, 27 Sep 2010 00:35:35 +0200 Subject: [Ekiga-list] Why my ekiga is continually trying to subscribe to my contacts telephone numbers ? In-Reply-To: References: Message-ID: Hi, On Sun, Sep 26, 2010 at 1:07 PM, J?nis Ruk??ns wrote: > Hi, > >> I'm viewing too this in wireshark capture (continuously launching SIP >> SUBSCRIBE REQUEST): >> ?198 ? ?6.674571 ? ? ? ?192.168.101.120 38.223.166.2 ? ?SIP ? ? Request: SUBSCRIBE sip:javi at xxxxx >> 199 ? ? 6.676041 ? ? ? ?10.4.0.120 ? ? ?38.223.166.2 ? ?SIP ? ? Request: SUBSCRIBE sip:javi at xxxxxx >> 202 ? ? 6.681867 ? ? ? ?192.168.101.120 38.117.97.125 ? SIP ? ? Request: SUBSCRIBE >> sip:javi at yyyyyy >> 203 ? ? 6.683218 ? ? ? ?10.4.0.120 ? ? ?38.117.97.125 ? SIP ? ? Request: SUBSCRIBE sip:javi at yyyyy >> >> I'm viewing at least 4 ips against ekiga is trying to subscribe my contacts: >> 38.117.97.125, 38.223.166.2, 40.233.138.214, 39.165.13.136 >> >> I has only one account in my ekiga, and is to our internal asterisk. > > SUBSCRIBEs are sent to the server of the particular contact, not the > server of your account. Those IPs should correspond to what xxxxxx and > yyyyyy resolve to. Thus, if you have somecontact at ekiga.net, then the > SUBSCRIBE will be sent to 86.64.162.35 (which is the IP of ekiga.net). > >> Can I configure ekiga to not do such things (subscribe to externals ips)? > > I'm not sure, but I think no, presence status can't be disabled. Thank you, clarifying this, should be awesome that ekiga could offer this option > >> Anther issue, do you know why my linux is logging as two ip different >> (10.4.0.120 and 192.168.101.120) ? >> >> My ip route config is: >> $ ip route >> 10.4.0.0/24 dev br-gest ?proto kernel ?scope link ?src 10.4.0.120 >> 192.168.0.0/16 dev br-lan ?proto kernel ?scope link ?src 192.168.101.120 >> default via 192.168.100.1 dev br-lan >> >> So I don't understand why connections to 38.223.166.2 goes sometimes >> with my 10.4.0.120 ip ... > > I could be wrong (I'm not Ekiga developer), but here's my guess. > > First, SIP requires the sent message to contain the IP of the > interface through which it was sent (in Via header). Therefore Ekiga > can't send from 0.0.0.0 and let the kernel decide the source IP. > > Second, Ekiga doesn't "know" which interface (and therefore source > address) will be used by the kernel for packets going to 38.223.166.2. > AFAIK there is no way to query it; the other way would be to reproduce > the kernel routing algorithm in Ekiga, which is impossible. Therefore > Ekiga sends two copies of the message - one w/ 10.4.0.120 in Via and > as the source address, and the other w/ 192.168.101.120. > > I'm not sure about the current version of Ekiga, but in older ones it > was possible to specify which interface to use. I will try changing ekiga/protocols/sip/listen_port gconf settings to ip:port, but I'm not sure it will work. Thank you very much! From arcfide at sacrideo.us Mon Sep 27 01:01:16 2010 From: arcfide at sacrideo.us (arcfide at sacrideo.us) Date: Sun, 26 Sep 2010 21:01:16 -0400 Subject: [Ekiga-list] Problems with CallCentric and DTMF/RFC In-Reply-To: <4C9B4790.2050902@pu-pm.univ-fcomte.fr> Message-ID: Eugen, I just tried it with the settings switched around and it works great now. Thanks for the tip. Aaron Hsu -------------- next part -------------- An embedded message was scrubbed... From: Eugen Dedu Subject: Re: [Ekiga-list] Problems with CallCentric and DTMF/RFC Date: Thu, 23 Sep 2010 14:26:56 +0200 Size: 3925 URL: From javibarroso at gmail.com Mon Sep 27 08:19:44 2010 From: javibarroso at gmail.com (Javier Barroso) Date: Mon, 27 Sep 2010 10:19:44 +0200 Subject: [Ekiga-list] Why my ekiga is continually trying to subscribe to my contacts telephone numbers ? In-Reply-To: References: Message-ID: On Mon, Sep 27, 2010 at 12:35 AM, Javier Barroso wrote: >> I'm not sure about the current version of Ekiga, but in older ones it >> was possible to specify which interface to use. > I will try changing ekiga/protocols/sip/listen_port gconf settings to > ip:port, but I'm not sure it will work. Ough, this settings is an integer, so I can't change it ! :( Thanks From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Sep 27 09:30:28 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 27 Sep 2010 11:30:28 +0200 Subject: [Ekiga-list] Creative Webcam NX not working in Ekiga for Windows? In-Reply-To: <4C9CB671.2060804@pu-pm.univ-fcomte.fr> References: <4C971774.4070503@pu-pm.univ-fcomte.fr> <4C9CB671.2060804@pu-pm.univ-fcomte.fr> Message-ID: <4CA06434.20607@pu-pm.univ-fcomte.fr> I have another idea: you could press a few times the video preview button (on top of the video image) and send again the -d 4 output log, in ordre to see clearer the error triggered by the camera. On 24/09/10 16:32, Eugen Dedu wrote: > Sorry, I do not see anything wrong. Does the name of your camera > contain non-ASCII characters, like registered mark etc.? I see a # > there, but this should not pose problem. > > Please create a bug report on bugzilla about this bug, so that we do not > forget it. > > Eugen > > On 20/09/10 20:05, Mike Halmarack wrote: >> Hi Eugen, thanks for the advice. Here's the debug output link. >> >> http://pastebin.ca/1945257 >> >> Regards, >> Mike >> >> On Mon, Sep 20, 2010 at 9:12 AM, Eugen >> Dedu>> wrote: >> >>> On 19/09/10 15:45, Mike Halmarack wrote: >>> >>>> I can't get my Creative Webcam NX to work in the Windows version of >>>> Ekiga >>>> 3.2.7 >>>> There are three Creative Webcam NX options available in >>>> Edit>Preferences>Video>Devices>Input Device >>>> and none of them enable the showing of video in the call panel. The 2 >>>> alternative Creative Webcam NX options cause error messages when >>>> they're >>>> chosen. >>>> >>> >>> Please choose the option which had not generate an error. Quit ekiga and >>> restart it, and tell if the images are shown. >>> >>> If not, please restart ekiga with -d 4 and give us the output ( >>> http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_2 >>> >>> ). >>> >>> >>> I did a search of the list archive for similar problems and saw it >>>> suggested >>>> that the user select: >>>> Preferences>Video> V4L2 or V4L >>>> These choices aren't available in the Windows prefs. Nor are there any >>>> mentions of V4L2 or V4L in any of the files associated with the >>>> application. >>>> Maybe these options only apply to the Linux platform. >>>> >>> >>> Indeed. >>> >>> >>> Can anyone please tell me how I might fix this, or alternatively can >>>> someone >>>> recommend a Webcam that will work with the Windows version of Ekiga? From thedogfarted at gmail.com Mon Sep 27 17:16:45 2010 From: thedogfarted at gmail.com (=?UTF-8?B?SsSBbmlzIFJ1a8WhxIFucw==?=) Date: Mon, 27 Sep 2010 20:16:45 +0300 Subject: [Ekiga-list] Why my ekiga is continually trying to subscribe to my contacts telephone numbers ? In-Reply-To: References: Message-ID: On Mon, Sep 27, 2010 at 11:19 AM, Javier Barroso wrote: > On Mon, Sep 27, 2010 at 12:35 AM, Javier Barroso wrote: >>> I'm not sure about the current version of Ekiga, but in older ones it >>> was possible to specify which interface to use. >> I will try changing ekiga/protocols/sip/listen_port gconf settings to >> ip:port, but I'm not sure it will work. > Ough, this settings is an integer, so I can't change it ! :( For Ekiga 2.0.x (yes that's the version I have installed) there is /apps/ekiga/protocols/interface which is a string. For me it is set to "eth0 [192.168.0.31]". -- Ian From palama at inwind.it Tue Sep 28 07:41:18 2010 From: palama at inwind.it (palama at inwind.it) Date: Tue, 28 Sep 2010 09:41:18 +0200 Subject: [Ekiga-list] Ekiga.net refuses registering Twinkle In-Reply-To: <4C9DF312.6080703@pu-pm.univ-fcomte.fr> References: <4C971774.4070503@pu-pm.univ-fcomte.fr> <4C9CB671.2060804@pu-pm.univ-fcomte.fr> <20100925144055.4207917f.palama@inwind.it> <4C9DF312.6080703@pu-pm.univ-fcomte.fr> Message-ID: <20100928094118.27aa49a1.palama@inwind.it> On Sat, 25 Sep 2010 15:03:14 +0200 Eugen Dedu wrote: > Hello Antonio, glad to hear from you. > > I think this is a bug (I do not think there is a preference on Ekiga > over other clients), but as I am not admnistrator I cannot be sure. > Hello Eugen, it usually happens in late evening after Twinkle has been registered for many hours. I would like to help debbugging but, unfortunately it seems twinkle has no debug option so I will have to cut and paste from the log window or use the command line version with tee. Do you know whom should I mail this logs to find out what happens? Best regards, Antonio -- From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Sep 28 08:23:15 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 28 Sep 2010 10:23:15 +0200 Subject: [Ekiga-list] Ekiga.net refuses registering Twinkle In-Reply-To: <20100928094118.27aa49a1.palama@inwind.it> References: <4C971774.4070503@pu-pm.univ-fcomte.fr> <4C9CB671.2060804@pu-pm.univ-fcomte.fr> <20100925144055.4207917f.palama@inwind.it> <4C9DF312.6080703@pu-pm.univ-fcomte.fr> <20100928094118.27aa49a1.palama@inwind.it> Message-ID: <4CA1A5F3.3040608@pu-pm.univ-fcomte.fr> On 28/09/10 09:41, palama at inwind.it wrote: > On Sat, 25 Sep 2010 15:03:14 +0200 > Eugen Dedu wrote: > >> Hello Antonio, glad to hear from you. >> >> I think this is a bug (I do not think there is a preference on Ekiga >> over other clients), but as I am not admnistrator I cannot be sure. >> > Hello Eugen, > > it usually happens in late evening after Twinkle has been registered for many hours. > I would like to help debbugging but, unfortunately it seems twinkle has no debug option so I will have to cut and paste from the log window or use the command line version with tee. > Do you know whom should I mail this logs to find out what happens? Well, it should be Twinkle developers who need to be contacter. Cheers, -- Eugen From javibarroso at gmail.com Tue Sep 28 09:53:18 2010 From: javibarroso at gmail.com (Javier Barroso) Date: Tue, 28 Sep 2010 11:53:18 +0200 Subject: [Ekiga-list] Why my ekiga is continually trying to subscribe to my contacts telephone numbers ? In-Reply-To: References: Message-ID: On Mon, Sep 27, 2010 at 7:16 PM, J?nis Ruk??ns wrote: > On Mon, Sep 27, 2010 at 11:19 AM, Javier Barroso wrote: >> On Mon, Sep 27, 2010 at 12:35 AM, Javier Barroso wrote: >>>> I'm not sure about the current version of Ekiga, but in older ones it >>>> was possible to specify which interface to use. >>> I will try changing ekiga/protocols/sip/listen_port gconf settings to >>> ip:port, but I'm not sure it will work. >> Ough, this settings is an integer, so I can't change it ! :( > > For Ekiga 2.0.x (yes that's the version I have installed) there is > /apps/ekiga/protocols/interface which is a string. For me it is set to > "eth0 [192.168.0.31]". Here (ekiga 3.2) seems to be a integer too (liken listen address), but I don't know how can I guess which value is the best. I changed to 5 because 'ip add' show me 5: br-lan ... (the bridge to use), but after restart ekiga it continues sending thought the other interface I tried to change from integer to string, but it didn't work (I know I shouldn't change it) Thanks! From psikomo at gmail.com Wed Sep 29 13:58:31 2010 From: psikomo at gmail.com (pablo de la fuente) Date: Wed, 29 Sep 2010 15:58:31 +0200 Subject: [Ekiga-list] Flows of buffer videoinput Message-ID: Hello all of you, I need work with the buffer videoinput to recode it. I have a MCU (multiconferece unit) and several clients scenario. I want recode videoinput of one of them. But I don't know how to catch each one of them (videoinput flows) Has Ekiga a ID for each videoinput of a client, in a multiconference? I saw the videoinput-manager files but I don't understand. Any suggestion is welcome or something. Thank you. Pablo. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Sep 29 15:12:07 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 29 Sep 2010 17:12:07 +0200 Subject: [Ekiga-list] Flows of buffer videoinput In-Reply-To: References: Message-ID: <4CA35747.2090702@pu-pm.univ-fcomte.fr> On 29/09/10 15:58, pablo de la fuente wrote: > Hello all of you, > > I need work with the buffer videoinput to recode it. I have a MCU > (multiconferece unit) and several clients scenario. I want recode > videoinput of one of them. But I don't know how to catch each one of > them (videoinput flows) Has Ekiga a ID for each videoinput of a client, > in a multiconference? > I saw the videoinput-manager files but I don't understand. > > Any suggestion is welcome or something. No suggestion, sorry. -- Eugen From rowens at ptd.net Thu Sep 30 02:43:41 2010 From: rowens at ptd.net (Rob Owens) Date: Wed, 29 Sep 2010 22:43:41 -0400 Subject: [Ekiga-list] zrtp encryption? Message-ID: <20100930024341.GA30996@aurora.owens.net> What's the status of zrtp encryption in Ekiga? I thought I remembered reading somewhere that it was planned for somewhere in the 3.x release, but everything I can find about it now says "not yet". I just tested Twinkle with zrtp and it works nice and easy (I didn't sniff any packets to make sure it's working right, but the GUI tells me it is). But Twinkle doesn't support video... I'd love to use Ekiga for encrypted video conversations. Any chance it'll happen? -Rob From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 30 11:59:16 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 30 Sep 2010 13:59:16 +0200 Subject: [Ekiga-list] zrtp encryption? In-Reply-To: <20100930024341.GA30996@aurora.owens.net> References: <20100930024341.GA30996@aurora.owens.net> Message-ID: <4CA47B94.8090300@pu-pm.univ-fcomte.fr> On 30/09/10 04:43, Rob Owens wrote: > What's the status of zrtp encryption in Ekiga? I thought I remembered > reading somewhere that it was planned for somewhere in the 3.x release, > but everything I can find about it now says "not yet". > > I just tested Twinkle with zrtp and it works nice and easy (I didn't > sniff any packets to make sure it's working right, but the GUI tells me > it is). But Twinkle doesn't support video... > > I'd love to use Ekiga for encrypted video conversations. Any chance > it'll happen? According to http://www.opalvoip.org/wiki/index.php?n=Main.Milestones, zrtp will be complete when the current development becomes stable. I would say this appears in 3-12 months (if you want more precision, contact its author). Ekiga will hopefully release a version with it 0-3 months later, but this interval can be greater. -- Eugen From rowens at ptd.net Thu Sep 30 15:34:20 2010 From: rowens at ptd.net (Rob Owens) Date: Thu, 30 Sep 2010 11:34:20 -0400 Subject: [Ekiga-list] zrtp encryption? In-Reply-To: <4CA47B94.8090300@pu-pm.univ-fcomte.fr> References: <20100930024341.GA30996@aurora.owens.net> <4CA47B94.8090300@pu-pm.univ-fcomte.fr> Message-ID: <20100930153420.GA1566@aurora.owens.net> On Thu, Sep 30, 2010 at 01:59:16PM +0200, Eugen Dedu wrote: > On 30/09/10 04:43, Rob Owens wrote: >> What's the status of zrtp encryption in Ekiga? I thought I remembered >> reading somewhere that it was planned for somewhere in the 3.x release, >> but everything I can find about it now says "not yet". >> >> I just tested Twinkle with zrtp and it works nice and easy (I didn't >> sniff any packets to make sure it's working right, but the GUI tells me >> it is). But Twinkle doesn't support video... >> >> I'd love to use Ekiga for encrypted video conversations. Any chance >> it'll happen? > > According to http://www.opalvoip.org/wiki/index.php?n=Main.Milestones, > zrtp will be complete when the current development becomes stable. I > would say this appears in 3-12 months (if you want more precision, > contact its author). > > Ekiga will hopefully release a version with it 0-3 months later, but > this interval can be greater. > Thanks for the info. Twinkle uses libzrtpcpp for its zrtp support. I guess Ekiga can't use that due to architecture reasons? -Rob From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Sep 30 19:58:19 2010 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 30 Sep 2010 21:58:19 +0200 Subject: [Ekiga-list] zrtp encryption? In-Reply-To: <20100930153420.GA1566@aurora.owens.net> References: <20100930024341.GA30996@aurora.owens.net> <4CA47B94.8090300@pu-pm.univ-fcomte.fr> <20100930153420.GA1566@aurora.owens.net> Message-ID: <4CA4EBDB.3070105@pu-pm.univ-fcomte.fr> On 30/09/10 17:34, Rob Owens wrote: > On Thu, Sep 30, 2010 at 01:59:16PM +0200, Eugen Dedu wrote: >> On 30/09/10 04:43, Rob Owens wrote: >>> What's the status of zrtp encryption in Ekiga? I thought I remembered >>> reading somewhere that it was planned for somewhere in the 3.x release, >>> but everything I can find about it now says "not yet". >>> >>> I just tested Twinkle with zrtp and it works nice and easy (I didn't >>> sniff any packets to make sure it's working right, but the GUI tells me >>> it is). But Twinkle doesn't support video... >>> >>> I'd love to use Ekiga for encrypted video conversations. Any chance >>> it'll happen? >> >> According to http://www.opalvoip.org/wiki/index.php?n=Main.Milestones, >> zrtp will be complete when the current development becomes stable. I >> would say this appears in 3-12 months (if you want more precision, >> contact its author). >> >> Ekiga will hopefully release a version with it 0-3 months later, but >> this interval can be greater. >> > Thanks for the info. Twinkle uses libzrtpcpp for its zrtp support. I > guess Ekiga can't use that due to architecture reasons? I do not know. Someone needs to look into that... -- Eugen