From vanherkhoek at gmail.com Sun May 3 08:00:43 2009 From: vanherkhoek at gmail.com (Van Herk Hoek Holding BV) Date: Sun, 3 May 2009 10:00:43 +0200 Subject: [Ekiga-list] question about the SIP link in webpages Message-ID: <8738498D-1A6D-4714-97FA-1006EC2E1D42@gmail.com> Hi, I would like to set up a webpage containing several links to make phonecalls, to different persons. However, I can't find anything on the correct syntax to the links. I mean, is there only sip:name at ekiga.net, or are there ways to pass on parameters to ekiga? Like telling Ekiga to open a videocall to the one link, and a voice- only call to the other link? I did look through the wiki but could not find anything on this subject.. Any help would be greatly appreciated! Best regards, Ron van Herk From sevmek at free.fr Sun May 3 08:36:18 2009 From: sevmek at free.fr (yannick) Date: Sun, 03 May 2009 10:36:18 +0200 Subject: [Ekiga-list] question about the SIP link in webpages In-Reply-To: <8738498D-1A6D-4714-97FA-1006EC2E1D42@gmail.com> References: <8738498D-1A6D-4714-97FA-1006EC2E1D42@gmail.com> Message-ID: <49FD5782.4070107@free.fr> Van Herk Hoek Holding BV a ?crit : > Hi, > > I would like to set up a webpage containing several links to make > phonecalls, to different persons. However, I can't find anything on the > correct syntax to the links. I mean, is there only sip:name at ekiga.net, > or are there ways to pass on parameters to ekiga? Hi, It's not possible to pass argument. As a workaround you can setup your ekiga client to use only audio, disabling all video codecs. I do not see how to configure ekiga on a sip address basis. Here you can find an exemple of using HTML to place calls: http://wiki.ekiga.org/index.php/Ekiga_Interoperability#Web and an experimental web button reflecting presence status here: http://ekiga.net/yannick/helper.php Best regards, Yannick > > Like telling Ekiga to open a videocall to the one link, and a voice-only > call to the other link? > > I did look through the wiki but could not find anything on this subject.. > > Any help would be greatly appreciated! > > Best regards, > Ron van Herk > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > From cameron.camo47 at gmail.com Sun May 3 23:17:10 2009 From: cameron.camo47 at gmail.com (Cameron K Denton) Date: Mon, 04 May 2009 03:47:10 +0430 Subject: [Ekiga-list] (no subject) Message-ID: <49FE25F6.5030404@gmail.com> Help! I recently did i fresh install of Ubuntu 9.04 and ekiga either 1.closes when I attempt to make a call with call button or 2.when I call for an echo test(double clicking it) it calls and immediately hangs up or connects with no sound. here it is ran -d 1 3.2.0 by on Unix Linux (2.6.30-020630rc2-generic-i686) with PTLib (v2.6.1) at 2009/5/4 3:33:52.130 2009/05/04 03:33:52.131 0:00.103 Ekiga SVN revision: unknown 2009/05/04 03:33:52.300 0:00.272 HalManager_dbusPopulating full interface list failed - Method "getDevices" with signature "" on interface "org.freedesktop.NetworkManager" doesn't exist 2009/05/04 03:33:52.301 0:00.273 Detecting V4L2 devices 2009/05/04 03:33:52.301 0:00.273 Unable to detect v4l2 directory 2009/05/04 03:33:52.371 0:00.343 OpalMan Registered endpoint with prefix pc I: caps.c: Limited capabilities successfully to CAP_SYS_NICE. I: caps.c: Dropping root privileges. I: caps.c: Limited capabilities successfully to CAP_SYS_NICE. 2009/05/04 03:33:52.543 0:00.515 OpalMan Registered endpoint with prefix sip 2009/05/04 03:33:52.548 0:00.520 OpalMan Registered endpoint with prefix sips 2009/05/04 03:33:52.551 0:00.523 OpalMan Registered endpoint with prefix h323 2009/05/04 03:33:52.552 0:00.524 OpalMan Registered endpoint with prefix h323s 2009/05/04 03:34:12.680 0:20.652 subscriber:0xb5506b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.680 0:20.652 subscriber:0xb5506b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.681 0:20.653 subscriber:0xb5506b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.681 0:20.653 subscriber:0xb5506b90 SIP Could not find udp$ekiga.net:5060 2009/05/04 03:34:12.752 0:20.724 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.752 0:20.725 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.753 0:20.725 SIP Could not find udp$ekiga.net:5060 2009/05/04 03:34:12.753 0:20.725 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.753 0:20.725 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.753 0:20.725 SIP Could not find udp$ekiga.net:5060 2009/05/04 03:34:12.754 0:20.726 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.754 0:20.726 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.754 0:20.726 SIP Could not find udp$ekiga.net:5060 2009/05/04 03:34:12.755 0:20.727 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.755 0:20.727 Opal Could not find host "ekiga.net" 2009/05/04 03:34:12.755 0:20.727 SIP Could not find udp$ekiga.net:5060 2009/05/04 03:34:13.261 0:21.233 Ekiga version 3.2.0 2009/05/04 03:34:13.262 0:21.234 OPAL version 3.6.1 2009/05/04 03:34:13.263 0:21.235 PTLIB version 2.6.1 2009/05/04 03:34:13.263 0:21.235 GNOME support disabled 2009/05/04 03:34:13.264 0:21.236 Accelerated rendering support enabled 2009/05/04 03:34:13.264 0:21.236 DBUS support enabled 2009/05/04 03:34:13.264 0:21.236 GConf support enabled 2009/05/04 03:34:13.264 0:21.237 ESound support disabled 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 SIP Could not find udp$ekiga.net:5060 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:24.812 0:32.785 CallSetup:0xb4914b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:24.813 0:32.785 CallSetup:0xb4914b90 SIP Could not find udp$ekiga.net:5060 2009/05/04 03:34:27.648 0:35.621 CallSetup:0xb4892b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 SIP Could not find udp$ekiga.net:5060 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 Opal Could not find host "ekiga.net" 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 SIP Could not find udp$ekiga.net:5060 terminate called after throwing an instance of 'std::length_error' what(): basic_string::_S_create Aborted From sevmek at free.fr Mon May 4 06:22:39 2009 From: sevmek at free.fr (yannick) Date: Mon, 04 May 2009 08:22:39 +0200 Subject: [Ekiga-list] (no subject) In-Reply-To: <49FE25F6.5030404@gmail.com> References: <49FE25F6.5030404@gmail.com> Message-ID: <49FE89AF.1070301@free.fr> Cameron K Denton a ?crit : > Help! I recently did i fresh install of Ubuntu 9.04 and ekiga either Are you sure it is a fresh install? In the log you provided I noticed your kernel is 2.6.30-020630rc2-generic-i686; Ubuntu 9.04 do not ship with this kernel, as you can see in this page: http://packages.ubuntu.com/search?suite=default§ion=all&arch=any&searchon=names&keywords=linux The command "uname -a" will provide you further information about the installed kernel. > 1.closes when I attempt to make a call with call button or This seems a crash. In case of crash Ubuntu should run a programm named "apport" which ask you to report the crash and will help you to add valuable information to track the bug down. Please use it. > 2.when I call for an echo test(double clicking it) it calls and > immediately hangs up or connects with no sound. Did you register an account to Ekiga.net? Here are detailed informations to setup Ekiga: http://wiki.ekiga.org/index.php/Configuring_Ekiga > > here it is ran -d 1 > 3.2.0 by on Unix Linux (2.6.30-020630rc2-generic-i686) with PTLib > (v2.6.1) at 2009/5/4 3:33:52.130 > 2009/05/04 03:33:52.131 0:00.103 > Ekiga SVN revision: unknown > 2009/05/04 03:33:52.300 0:00.272 > HalManager_dbusPopulating full interface list failed - Method > "getDevices" with signature "" on interface > "org.freedesktop.NetworkManager" doesn't exist > > 2009/05/04 03:33:52.301 0:00.273 > Detecting V4L2 devices > 2009/05/04 03:33:52.301 0:00.273 > Unable to detect v4l2 directory > 2009/05/04 03:33:52.371 0:00.343 > OpalMan Registered endpoint with prefix pc > I: caps.c: Limited capabilities successfully to CAP_SYS_NICE. > I: caps.c: Dropping root privileges. > I: caps.c: Limited capabilities successfully to CAP_SYS_NICE. > 2009/05/04 03:33:52.543 0:00.515 > OpalMan Registered endpoint with prefix sip > 2009/05/04 03:33:52.548 0:00.520 > OpalMan Registered endpoint with prefix sips > 2009/05/04 03:33:52.551 0:00.523 > OpalMan Registered endpoint with prefix h323 > 2009/05/04 03:33:52.552 0:00.524 > OpalMan Registered endpoint with prefix h323s > 2009/05/04 03:34:12.680 0:20.652 subscriber:0xb5506b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.680 0:20.652 subscriber:0xb5506b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.681 0:20.653 subscriber:0xb5506b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.681 0:20.653 subscriber:0xb5506b90 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:12.752 0:20.724 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.752 0:20.725 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.753 0:20.725 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:12.753 0:20.725 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.753 0:20.725 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.753 0:20.725 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:12.754 0:20.726 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.754 0:20.726 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.754 0:20.726 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:12.755 0:20.727 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.755 0:20.727 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.755 0:20.727 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:13.261 0:21.233 > Ekiga version 3.2.0 > 2009/05/04 03:34:13.262 0:21.234 OPAL > version 3.6.1 > 2009/05/04 03:34:13.263 0:21.235 > PTLIB version 2.6.1 > 2009/05/04 03:34:13.263 0:21.235 > GNOME support disabled > 2009/05/04 03:34:13.264 0:21.236 > Accelerated rendering support enabled > 2009/05/04 03:34:13.264 0:21.236 DBUS > support enabled > 2009/05/04 03:34:13.264 0:21.236 > GConf support enabled > 2009/05/04 03:34:13.264 0:21.237 > ESound support disabled > 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:24.812 0:32.785 CallSetup:0xb4914b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:24.813 0:32.785 CallSetup:0xb4914b90 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:27.648 0:35.621 CallSetup:0xb4892b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > SIP Could not find udp$ekiga.net:5060 > terminate called after throwing an instance of 'std::length_error' > what(): basic_string::_S_create > Aborted > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > From otakuj462 at gmail.com Wed May 6 17:44:37 2009 From: otakuj462 at gmail.com (Jake B) Date: Wed, 6 May 2009 13:44:37 -0400 Subject: [Ekiga-list] seeking good VOIP provider to replace Skype Message-ID: <8e648abd0905061044m26fdfb9ega3f52a64abae51a2@mail.gmail.com> Hi all, I'm currently examining the feasibility of replacing Skype with Ekiga. Right now, I'm using SkypeOut with a monthly plan that offers unlimited calling to landline phones in North America for $3/month. I think this is a very competitive rate, and I was wondering if anyone was aware of a VOIP provider that offered a similar plan (monthly, unlimited to North America) and similar rates. I'd appreciate any guidance anyone can offer. Thanks, Jake -------------- next part -------------- An HTML attachment was scrubbed... URL: From evanrmurphy at gmail.com Wed May 6 18:50:06 2009 From: evanrmurphy at gmail.com (Evan R. Murphy) Date: Wed, 6 May 2009 13:50:06 -0500 Subject: [Ekiga-list] seeking good VOIP provider to replace Skype In-Reply-To: <8e648abd0905061044m26fdfb9ega3f52a64abae51a2@mail.gmail.com> References: <8e648abd0905061044m26fdfb9ega3f52a64abae51a2@mail.gmail.com> Message-ID: <50c8be3c0905061150y45ff4018g853e9c2ece4e11a@mail.gmail.com> 2009/5/6 Jake B : > Hi all, > > I'm currently examining the feasibility of replacing Skype with Ekiga. Right > now, I'm using SkypeOut with a monthly plan that offers unlimited calling to > landline phones in North America for $3/month. I think this is a very > competitive rate, and I was wondering if anyone was aware of a VOIP provider > that offered a similar plan (monthly, unlimited to North America) and > similar rates. > > I'd appreciate any guidance anyone can offer. Thanks, > > Jake Hey Jake, I'm not immediately aware of a VoIP provider who could offer unlimited calling to landline phones as part of a monthly plan with Ekiga. But I'm also kind of new to this, so maybe someone can correct me. What I do know is that Diamond (http://tinyurl.com/dx2bs9), a recommended provider for Ekiga, offers better pay-as-you-go rates to the US than SkypeOut. Compare Diamond's $0.016 with SkypeOut's $0.024 after the value added tax (http://tinyurl.com/cysfq7). Cheers, Evan From simos.lists at googlemail.com Wed May 6 19:41:56 2009 From: simos.lists at googlemail.com (Simos Xenitellis) Date: Wed, 6 May 2009 20:41:56 +0100 Subject: [Ekiga-list] seeking good VOIP provider to replace Skype In-Reply-To: <50c8be3c0905061150y45ff4018g853e9c2ece4e11a@mail.gmail.com> References: <8e648abd0905061044m26fdfb9ega3f52a64abae51a2@mail.gmail.com> <50c8be3c0905061150y45ff4018g853e9c2ece4e11a@mail.gmail.com> Message-ID: <598e9210905061241j37540adaga47361cf138e0144@mail.gmail.com> On Wed, May 6, 2009 at 7:50 PM, Evan R. Murphy wrote: > 2009/5/6 Jake B : >> Hi all, >> >> I'm currently examining the feasibility of replacing Skype with Ekiga. Right >> now, I'm using SkypeOut with a monthly plan that offers unlimited calling to >> landline phones in North America for $3/month. I think this is a very >> competitive rate, and I was wondering if anyone was aware of a VOIP provider >> that offered a similar plan (monthly, unlimited to North America) and >> similar rates. >> >> I'd appreciate any guidance anyone can offer. Thanks, >> >> Jake > > Hey Jake, > > I'm not immediately aware of a VoIP provider who could offer unlimited > calling to landline phones as part of a monthly plan with Ekiga. But > I'm also kind of new to this, so maybe someone can correct me. What I > do know is that Diamond (http://tinyurl.com/dx2bs9), a recommended > provider for Ekiga, offers better pay-as-you-go rates to the US than > SkypeOut. Compare Diamond's $0.016 with SkypeOut's $0.024 after the > value added tax (http://tinyurl.com/cysfq7). There are several third-party VOIP services which offer cheaper services than Skype, and offer SIP support so that you can use your favorite softphone, like Ekiga. For example, VoipBuster Pro (1 year subscription, ?15; there is a connection fee), http://www.voipbusterpro.com/en/ http://progx.ch/home-voip-clone-3-1-14.html In order to test before you buy (1 minute test calls), create an account at http://www.justvoip.com/en/websignup.php and configure Ekiga according to http://progx.ch/home-voip-clone-3-1-15.html http://wiki.ekiga.org/index.php/List_of_PC_to_phone_providers Investigate more the http://progx.ch website to compare and find the best service for your calling profile. Hope this helps, Simos From chinku.linux at gmail.com Thu May 7 09:28:17 2009 From: chinku.linux at gmail.com (chaitanya mehandru) Date: Thu, 7 May 2009 14:58:17 +0530 Subject: [Ekiga-list] Ekiga 3.0.2 with IPP codecs doesn't connect using SIP protocol Message-ID: <24b40b2b0905070228y1c229f41m48b59d4ff0cc5d81@mail.gmail.com> Hi,I am trying to make video call(H264 codec) using IPP codecs with Ekiga. When I use the SIP protocol, the remote user gets the invitation and on accepting the invitation, the call terminates. In the status bar at the bottom, I see the 'Missed Call' message. If I use the H323 protocol, then the call gets connected but remote video is not available. I am using H264 video codec and the image size for video is QCIF. Please suggest me what to do. Thanks, Chaitanya -------------- next part -------------- An HTML attachment was scrubbed... URL: From stenka1 at go.com Thu May 7 14:18:59 2009 From: stenka1 at go.com (stenka1 at go.com) Date: Thu, 7 May 2009 14:18:59 +0000 (GMT) Subject: [Ekiga-list] seeking good VOIP provider to replace Skype Message-ID: <1027590039.269690.1241705939938.JavaMail.mail@webmail06> An HTML attachment was scrubbed... URL: From simos.lists at googlemail.com Thu May 7 15:41:44 2009 From: simos.lists at googlemail.com (Simos Xenitellis) Date: Thu, 7 May 2009 16:41:44 +0100 Subject: [Ekiga-list] seeking good VOIP provider to replace Skype In-Reply-To: <1027590039.269690.1241705939938.JavaMail.mail@webmail06> References: <1027590039.269690.1241705939938.JavaMail.mail@webmail06> Message-ID: <598e9210905070841v55e84fc9ne37a49e2883a7beb@mail.gmail.com> On Thu, May 7, 2009 at 3:18 PM, wrote: > > VoiPStunt is the best. You have free calls in North America and you use the > credit to make calls to your relatives in Iran :-) As I mentioned in my previous e-mail, there are several providers so it makes sense to compare prices based on the countries you are planning to make phonecalls to. All provider in the following page belong to the same company (Betamax), so their business plan is to float new providers with slightly different price structures. The full list, which helps for comparison, is at http://progx.ch/home-voip-prixbetamax-3-1-2.html Normally one would opt for a provider that gives you the most 'Freedays' (typically 120), has cheap rates for landlines and mobiles, may offer free or cheap SMS messages (can send from the website), has VoipIn telephone numbers (works with Ekiga ;-)), but most importantly it must support SIP. You mentioned above Iran. According to the comparison page, there are other providers that are cheaper than JustVoip. Good luck, Simos > just use sip.voipstunt.com as the registrar and make default. use iLBC as > codec, GSM is not very good. > > however it seems you are using Windows, so you can use thier own software > which will allow you to use VoipBuster Mate to enable your USB phone to > control the software, so you can dial directly from the phone in your hand. > > pity Ekiga does not have a plugin for USB phones. I only have Osol, no > windows. > > Stephen C. Bond > > > On May 7, 2009, ekiga-list-request at gnome.org wrote: > > Send ekiga-list mailing list submissions to > ekiga-list at gnome.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.gnome.org/mailman/listinfo/ekiga-list > or, via email, send a message with subject or body 'help' to > ekiga-list-request at gnome.org > > You can reach the person managing the list at > ekiga-list-owner at gnome.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ekiga-list digest..." > > > Today's Topics: > > ? 1. seeking good VOIP provider to replace Skype (Jake B) > ? 2. Re: seeking good VOIP provider to replace Skype (Evan R. Murphy) > ? 3. Re: seeking good VOIP provider to replace Skype (Simos Xenitellis) > ? 4. Ekiga 3.0.2 with IPP codecs doesn't connect using SIP > ? ? ?protocol (chaitanya mehandru) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 6 May 2009 13:44:37 -0400 > From: Jake B > Subject: [Ekiga-list] seeking good VOIP provider to replace Skype > To: ekiga-list at gnome.org > Message-ID: > <8e648abd0905061044m26fdfb9ega3f52a64abae51a2 at mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi all, > > I'm currently examining the feasibility of replacing Skype with Ekiga. Right > now, I'm using SkypeOut with a monthly plan that offers unlimited calling to > landline phones in North America for $3/month. I think this is a very > competitive rate, and I was wondering if anyone was aware of a VOIP provider > that offered a similar plan (monthly, unlimited to North America) and > similar rates. > > I'd appreciate any guidance anyone can offer. Thanks, > > Jake > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > > ------------------------------ > > Message: 2 > Date: Wed, 6 May 2009 13:50:06 -0500 > From: "Evan R. Murphy" > Subject: Re: [Ekiga-list] seeking good VOIP provider to replace Skype > To: Ekiga mailing list > Message-ID: > <50c8be3c0905061150y45ff4018g853e9c2ece4e11a at mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > 2009/5/6 Jake B : >> Hi all, >> >> I'm currently examining the feasibility of replacing Skype with Ekiga. >> Right >> now, I'm using SkypeOut with a monthly plan that offers unlimited calling >> to >> landline phones in North America for $3/month. I think this is a very >> competitive rate, and I was wondering if anyone was aware of a VOIP >> provider >> that offered a similar plan (monthly, unlimited to North America) and >> similar rates. >> >> I'd appreciate any guidance anyone can offer. Thanks, >> >> Jake > > Hey Jake, > > I'm not immediately aware of a VoIP provider who could offer unlimited > calling to landline phones as part of a monthly plan with Ekiga. But > I'm also kind of new to this, so maybe someone can correct me. What I > do know is that Diamond (http://tinyurl.com/dx2bs9), a recommended > provider for Ekiga, offers better pay-as-you-go rates to the US than > SkypeOut. Compare Diamond's $0.016 with SkypeOut's $0.024 after the > value added tax (http://tinyurl.com/cysfq7). > > Cheers, > Evan > > > ------------------------------ > > Message: 3 > Date: Wed, 6 May 2009 20:41:56 +0100 > From: Simos Xenitellis > Subject: Re: [Ekiga-list] seeking good VOIP provider to replace Skype > To: Ekiga mailing list > Message-ID: > <598e9210905061241j37540adaga47361cf138e0144 at mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > On Wed, May 6, 2009 at 7:50 PM, Evan R. Murphy > wrote: >> 2009/5/6 Jake B : >>> Hi all, >>> >>> I'm currently examining the feasibility of replacing Skype with Ekiga. >>> Right >>> now, I'm using SkypeOut with a monthly plan that offers unlimited calling >>> to >>> landline phones in North America for $3/month. I think this is a very >>> competitive rate, and I was wondering if anyone was aware of a VOIP >>> provider >>> that offered a similar plan (monthly, unlimited to North America) and >>> similar rates. >>> >>> I'd appreciate any guidance anyone can offer. Thanks, >>> >>> Jake >> >> Hey Jake, >> >> I'm not immediately aware of a VoIP provider who could offer unlimited >> calling to landline phones as part of a monthly plan with Ekiga. But >> I'm also kind of new to this, so maybe someone can correct me. What I >> do know is that Diamond (http://tinyurl.com/dx2bs9), a recommended >> provider for Ekiga, offers better pay-as-you-go rates to the US than >> SkypeOut. Compare Diamond's $0.016 with SkypeOut's $0.024 after the >> value added tax (http://tinyurl.com/cysfq7). > > There are several third-party VOIP services which offer cheaper > services than Skype, > and offer SIP support so that you can use your favorite softphone, like > Ekiga. > > For example, VoipBuster Pro (1 year subscription, ?15; there is a > connection fee), > http://www.voipbusterpro.com/en/ > http://progx.ch/home-voip-clone-3-1-14.html > > In order to test before you buy (1 minute test calls), create an account at > http://www.justvoip.com/en/websignup.php > and configure Ekiga according to > http://progx.ch/home-voip-clone-3-1-15.html > http://wiki.ekiga.org/index.php/List_of_PC_to_phone_providers > > Investigate more the http://progx.ch website to compare and find the > best service for your calling profile. > > Hope this helps, > Simos > > > ------------------------------ > > Message: 4 > Date: Thu, 7 May 2009 14:58:17 +0530 > From: chaitanya mehandru > Subject: [Ekiga-list] Ekiga 3.0.2 with IPP codecs doesn't connect > using SIP protocol > To: Ekiga mailing list > Message-ID: > <24b40b2b0905070228y1c229f41m48b59d4ff0cc5d81 at mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi,I am trying to make video call(H264 codec) using IPP codecs with Ekiga. > When I use the SIP protocol, the remote user gets the invitation and on > accepting the invitation, the call terminates. In the status bar at the > bottom, I see the 'Missed Call' message. > If I use the H323 protocol, then the call gets connected but remote video is > not available. > > I am using H264 video codec and the image size for video is QCIF. > > Please suggest me what to do. > > Thanks, > Chaitanya > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > > ------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > End of ekiga-list Digest, Vol 34, Issue 4 > ***************************************** > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From omegamormegil at gmail.com Thu May 7 18:25:24 2009 From: omegamormegil at gmail.com (Nate) Date: Thu, 7 May 2009 14:25:24 -0400 Subject: [Ekiga-list] Observations and challenges of switching from Skype to Ekiga Message-ID: Greetings! I decided last fall to switch from Skype to Ekiga for a few reasons, and I wanted to present you with some of my observations and a few wish list items. I prefer Ekiga because it is free software, and it integrates better with my OS (Ubuntu). Also, in spite of the fact that Skype works really well, and even supports Linux, it is distasteful to me that the service and software are proprietary. In addition, I purchased webcams for many of my extended family members for Christmas, as my immediate family was moving and I thought video calling would be a great way to stay in touch. In addition to giving my family members webcams, I wanted to give them a Free Software VOIP application to call me on, so that my gifts wouldn't have the effect of locking them into a proprietary system forever. What follows begins as a list of things I wish Ekiga did better, which transitions into a list of things Skype does better. Some of the items in the list could be more descriptive, so if you are interested in more information about my experience, I'll be happy to provide it. (Disclaimer: Some of these items likely have existing bug reports, or Ekiga may do it already and I couldn't figure out how, or it isn't Ekiga's but the SIP provider's responsibility. If any bugs here are new, I'd be happy to report them - just let me know.) -I can't Import/Export contacts from inside Ekiga (Roster and/or Evolution contacts) -The difference between the Ekiga Roster and Evolution contacts in Ekiga is very unclear. Why can't the Roster be called the Ekiga Address Book (or Ekiga Contacts) and the Evolution Address book be called the Evolution Address Book? This would make understanding the address book stuff significantly easier. The two contact lists should also behave the same way in the software, or the Evolution address book should be dropped, and the Ekiga Roster should gain the ability to import (sync?) contacts from Evolution instead. -Import contact info from Evolution Address book to Ekiga Roster. -Import contact info and phone numbers from Skype (probably a longshot, but it would be Really Awesome, and helpful, if not absolutely necessary, in getting normal people to make the switch) -Add Contact phone numbers to address book without requiring the full sip address (couldn't the full SIP address for traditional phone numbers be assumed in the configuration settings? This would also enable someone to try out a different SIP provider without having to manually edit all of their contacts) -Option for automatically entering the country code when dialing -When I leave the Ekiga PC to PC phone on all the time, I get calls from people I don't know at 3AM, waking up the baby. I want to have Ekiga running 24/7 so that it is useful for incoming calls from people I give my SIP phone number to (like customers). Setting a forced Do Not Disturb mode for each different SIP service would be useful, or only allowing calls from people I have on my contact list (like Skype) -Skype is prettier and more fun to use (UI, sound effects, more attractive and useful website) -Skype stores your contacts online (Huge! - it would be great if Ekiga could host my contacts, and if I also had the choice to host them myself on a home server) -Some settings are easier to configure Skype, especially in regard to settings which are currently handled through the Diamondville website, such as configuring call forwarding and voicemail, and adjusting call redirect settings (could this be done in Ekiga through an API?) -The Diamondville website is ugly and confusing to navigate, although the service generally seems good. I pay for incoming and outgoing calls to/from traditional phones, but I've had difficulty configuring the Diamondville service to forward to my cellphone if I don't answer it, something really easy to set up in Skype (I really need to call their customer service to get it straightened out, I know) Overall my biggest issue has been with the contacts. I had to set up Evolution with my email account for the sole purpose of exporting my Ekiga address book (which I now understand is really the Evolution address book). I'd really love to only use the Ekiga Roster, but right now I can't import my evolution contacts, and I don't see any way to export my Ekiga roster, which is a BIG DEAL since I need to copy the settings to a bunch of different computers. It would be easiest if I could use some online repository to store my contact list, so it would be available even if I was at a friend's house (currently this is the ONLY reason I ever access my Skype account - signing into Skype makes all of my contacts available when I'm away from home and just need to get a phone number). In spite of my issues, I do think Ekiga is great and improving with each release, and if it didn't exist, we'd all be stuck using Skype. I personally want Ekiga to improve to the point that it is the best VOIP software available. Hopefully some of the points I've raised above are useful. Thanks for all your hard work. Omegamormegil -------------- next part -------------- An HTML attachment was scrubbed... URL: From volkerbradley at gmail.com Fri May 8 14:52:32 2009 From: volkerbradley at gmail.com (Volker Bradley) Date: Fri, 8 May 2009 10:52:32 -0400 Subject: [Ekiga-list] Adding a Call Out account? Message-ID: Hi, Just installed Ekiga 3.20 in Kubuntu Jaunty. Then confirmed that my account at DiamondCard is current and contains a balance. To add a Call out account, I added the following information: Name: Ekiga Call Out Registrar: sip.diamondcard.us User: 44444 (this is not my actual Account Id) Authentication User: 44444 Password: 111111111111 (this is not my actual PIN code) Timeout: 3600 After entering my actual Account Id and PIN code information, Ekiga states: Ekiga Call Out Status: Could not register(Unauthorized) Can you suggest how to properly fill out the fields so that Ekiga Call Out will work? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 8 15:52:53 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 08 May 2009 17:52:53 +0200 Subject: [Ekiga-list] Adding a Call Out account? In-Reply-To: References: Message-ID: <4A045555.8030909@pu-pm.univ-fcomte.fr> Volker Bradley wrote: > Hi, > Just installed Ekiga 3.20 in Kubuntu Jaunty. Then confirmed that my account > at DiamondCard is current and contains a balance. > To add a Call out account, I added the following information: > Name: Ekiga Call Out > Registrar: sip.diamondcard.us > User: 44444 (this is not my actual Account Id) > Authentication User: 44444 > Password: 111111111111 (this is not my actual PIN code) > Timeout: 3600 Could you try Accounts->Add an ekiga call out account? It's simpler. As for why this does not work, maybe someone else has a clue... -- Eugen From volkerbradley at gmail.com Fri May 8 18:21:30 2009 From: volkerbradley at gmail.com (Volker Bradley) Date: Fri, 8 May 2009 14:21:30 -0400 Subject: [Ekiga-list] Adding a Call Out account? In-Reply-To: <4A045555.8030909@pu-pm.univ-fcomte.fr> References: <4A045555.8030909@pu-pm.univ-fcomte.fr> Message-ID: Interesting, That is what I had done. I did it again and it worked today. I must have mistyped. Thank you for the tip. Volker On Fri, May 8, 2009 at 11:52 AM, Eugen Dedu wrote: > Volker Bradley wrote: > >> Hi, >> Just installed Ekiga 3.20 in Kubuntu Jaunty. Then confirmed that my >> account >> at DiamondCard is current and contains a balance. >> To add a Call out account, I added the following information: >> Name: Ekiga Call Out >> Registrar: sip.diamondcard.us >> User: 44444 (this is not my actual Account Id) >> Authentication User: 44444 >> Password: 111111111111 (this is not my actual PIN code) >> Timeout: 3600 >> > > Could you try Accounts->Add an ekiga call out account? It's simpler. > > As for why this does not work, maybe someone else has a clue... > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From evanrmurphy at gmail.com Sat May 9 09:02:16 2009 From: evanrmurphy at gmail.com (Evan R. Murphy) Date: Sat, 9 May 2009 04:02:16 -0500 Subject: [Ekiga-list] Ekiga 3.0.2 with IPP codecs doesn't connect using SIP protocol In-Reply-To: <24b40b2b0905070228y1c229f41m48b59d4ff0cc5d81@mail.gmail.com> References: <24b40b2b0905070228y1c229f41m48b59d4ff0cc5d81@mail.gmail.com> Message-ID: <50c8be3c0905090202xd8dd2f2te6b56bcd720c9405@mail.gmail.com> 2009/5/7 chaitanya mehandru : > Hi, > I am trying to make video call(H264 codec) using IPP codecs with Ekiga. When > I use the SIP protocol, the remote user gets the invitation and on accepting > the invitation, the call terminates. In the status bar at the bottom, I see > the 'Missed Call' message. > If I use the H323 protocol, then the call gets connected but remote video is > not available. > I am using H264 video codec and the image size for video is QCIF. > Please suggest me what to do. > Thanks, > Chaitanya Hi Chaitanya, Are you sure the remote user has H.264? Mismatched codecs can create the kind of video passage issue you seem to be having on the H.323 protocol. (Can you see the remote user's video in this case?) Also, which version of Ekiga are you running, and on which OS? Regards, Evan From evanrmurphy at gmail.com Sat May 9 09:20:59 2009 From: evanrmurphy at gmail.com (Evan R. Murphy) Date: Sat, 9 May 2009 04:20:59 -0500 Subject: [Ekiga-list] Ekiga 3.0.2 with IPP codecs doesn't connect using SIP protocol In-Reply-To: <50c8be3c0905090202xd8dd2f2te6b56bcd720c9405@mail.gmail.com> References: <24b40b2b0905070228y1c229f41m48b59d4ff0cc5d81@mail.gmail.com> <50c8be3c0905090202xd8dd2f2te6b56bcd720c9405@mail.gmail.com> Message-ID: <50c8be3c0905090220v77695cfegcf5878a63754cd45@mail.gmail.com> 2009/5/9 Evan R. Murphy : > (Can you see the remote user's video in this case?) Let me make that more clear: You said, "If I use the H323 protocol, then the call gets connected but remote video is not available." I was wondering on which end caller's remote video is unavailable, or if it's both. From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat May 9 09:41:42 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 09 May 2009 11:41:42 +0200 Subject: [Ekiga-list] Ekiga 3.0.2 with IPP codecs doesn't connect using SIP protocol In-Reply-To: <50c8be3c0905090202xd8dd2f2te6b56bcd720c9405@mail.gmail.com> References: <24b40b2b0905070228y1c229f41m48b59d4ff0cc5d81@mail.gmail.com> <50c8be3c0905090202xd8dd2f2te6b56bcd720c9405@mail.gmail.com> Message-ID: <4A054FD6.3070701@pu-pm.univ-fcomte.fr> Evan R. Murphy wrote: > 2009/5/7 chaitanya mehandru : >> Hi, >> I am trying to make video call(H264 codec) using IPP codecs with Ekiga. When >> I use the SIP protocol, the remote user gets the invitation and on accepting >> the invitation, the call terminates. In the status bar at the bottom, I see >> the 'Missed Call' message. >> If I use the H323 protocol, then the call gets connected but remote video is >> not available. >> I am using H264 video codec and the image size for video is QCIF. >> Please suggest me what to do. >> Thanks, >> Chaitanya > > Hi Chaitanya, > > Are you sure the remote user has H.264? Mismatched codecs can create > the kind of video passage issue you seem to be having on the H.323 > protocol. (Can you see the remote user's video in this case?) Also, > which version of Ekiga are you running, and on which OS? With H323, only H.261 is available. So no video should be seen on *both* parties. (Please someone correct me if I am wrong.) As for SIP case, could you send the -d 4 output? -- Eugen From sevmek at free.fr Sat May 9 09:51:54 2009 From: sevmek at free.fr (yannick) Date: Sat, 09 May 2009 11:51:54 +0200 Subject: [Ekiga-list] Ekiga 3.0.2 with IPP codecs doesn't connect using SIP protocol In-Reply-To: <4A054FD6.3070701@pu-pm.univ-fcomte.fr> References: <24b40b2b0905070228y1c229f41m48b59d4ff0cc5d81@mail.gmail.com> <50c8be3c0905090202xd8dd2f2te6b56bcd720c9405@mail.gmail.com> <4A054FD6.3070701@pu-pm.univ-fcomte.fr> Message-ID: <4A05523A.9070505@free.fr> Eugen Dedu a ?crit : > Evan R. Murphy wrote: >> 2009/5/7 chaitanya mehandru : >>> Hi, >>> I am trying to make video call(H264 codec) using IPP codecs with >>> Ekiga. When >>> I use the SIP protocol, the remote user gets the invitation and on >>> accepting >>> the invitation, the call terminates. In the status bar at the bottom, >>> I see >>> the 'Missed Call' message. >>> If I use the H323 protocol, then the call gets connected but remote >>> video is >>> not available. >>> I am using H264 video codec and the image size for video is QCIF. >>> Please suggest me what to do. >>> Thanks, >>> Chaitanya >> >> Hi Chaitanya, >> >> Are you sure the remote user has H.264? Mismatched codecs can create >> the kind of video passage issue you seem to be having on the H.323 >> protocol. (Can you see the remote user's video in this case?) Also, >> which version of Ekiga are you running, and on which OS? > > With H323, only H.261 is available. So no video should be seen on > *both* parties. (Please someone correct me if I am wrong.) > > As for SIP case, could you send the -d 4 output? > AFAIK, using H.323, if the other end supports video, it *must* support H.261 codec. see e.g. "While video capabilities are optional, any video-enabled H.323 terminal must support the H.261 codec; support for H.263 is optional." source: http://www.packetizer.com/ipmc/h323/papers/primer/ As Ekiga only support H.261 video codec for the H.323 protocol, it seems there is an issue with the other end, or a bug in ekiga which is unlikely as it supports this feature since a long time now. Best regards, Yannick From tim_pattinson at hotmail.com Mon May 11 06:15:33 2009 From: tim_pattinson at hotmail.com (Tim Pattinson) Date: Mon, 11 May 2009 06:15:33 +0000 Subject: [Ekiga-list] Registration failed: 606 Message-ID: Hi, I've just registered for a new account at ekiga.net, and got a new username and password. But when I use these in the account druid in Ekiga, I just get the message "Registration failed: Registration failed" in the status bar, and "Registered accounts: 0" in the dialog. No other explanation what's wrong. If I capture the debug output, it contains the phrase "SIP/2.0 606 Not Acceptable", "CSeq: 1 REGISTER" right after it says "PDU received". What could be wrong? System is Mandriva linux 2008.1 with the standard "ekiga-2.0.12-1mdv2008.1" rpm from the repositories. It's a home network with a single router. Things I've tried: checking the name and password, I'm sure that's not the problem. And I read somewhere that funny characters (eg %, []) confuse the login process, so I made sure I don't have those in the username or password. Things I've not tried: I'm still using v2 of ekiga, I assume that should still work even though v3 is still out. I tried to just take a newer ekiga rpm but it wanted to pull in several dependencies so I played safe. And I haven't tried altering the NAT/STUN configuration because I really don't understand what they are and can't find a simple explanation. I don't think my firewall settings are particularly severe, just the default router settings and normal security level in Mandriva. What should I look for? Thanks! _________________________________________________________________ Insert movie times and more without leaving Hotmail?. http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd1_052009 -------------- next part -------------- An HTML attachment was scrubbed... URL: From chinku.linux at gmail.com Mon May 11 06:27:23 2009 From: chinku.linux at gmail.com (chaitanya mehandru) Date: Mon, 11 May 2009 11:57:23 +0530 Subject: [Ekiga-list] Ekiga 3.0.2 with IPP codecs doesn't connect using SIP protocol In-Reply-To: <50c8be3c0905090202xd8dd2f2te6b56bcd720c9405@mail.gmail.com> References: <24b40b2b0905070228y1c229f41m48b59d4ff0cc5d81@mail.gmail.com> <50c8be3c0905090202xd8dd2f2te6b56bcd720c9405@mail.gmail.com> Message-ID: <24b40b2b0905102327q76ee2682qe8574d4bce709590@mail.gmail.com> Hi,Thanks so much for the multiple replies!!! I guessed but was not sure if we can use H264 video using H323 protocol. Thanks to all, Chaitanya On Sat, May 9, 2009 at 2:32 PM, Evan R. Murphy wrote: > 2009/5/7 chaitanya mehandru : > > Hi, > > I am trying to make video call(H264 codec) using IPP codecs with Ekiga. > When > > I use the SIP protocol, the remote user gets the invitation and on > accepting > > the invitation, the call terminates. In the status bar at the bottom, I > see > > the 'Missed Call' message. > > If I use the H323 protocol, then the call gets connected but remote video > is > > not available. > > I am using H264 video codec and the image size for video is QCIF. > > Please suggest me what to do. > > Thanks, > > Chaitanya > > Hi Chaitanya, > > Are you sure the remote user has H.264? Mismatched codecs can create > the kind of video passage issue you seem to be having on the H.323 > protocol. (Can you see the remote user's video in this case?) Also, > which version of Ekiga are you running, and on which OS? > > Regards, > Evan > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From volkerbradley at gmail.com Mon May 11 19:42:36 2009 From: volkerbradley at gmail.com (Volker Bradley) Date: Mon, 11 May 2009 15:42:36 -0400 Subject: [Ekiga-list] Using Ekiga Call Out Message-ID: Hi, Am using Ekiga 3.20 in Kubuntu Jaunty and have a Diamond Card account. Using a Plantronics SP500 USB headset. Just called someone's cell phone and was bothered by having to wait for the other party to stop speaking for a noticeable period before I could speak. The conversation was forced and a bit uncomfortable for this reason Right now Ekiga is set to use the following Codecs: Speex 16 kHz H.323 Sip PCMU 8 kHz H.323 Sip PCMA 8 kHz H.323 Sip G722 16 kHz H.323 Sip Are there any changes that I can make to make it possible for the conversation to flow more easily? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: From hs.samix at gmail.com Tue May 12 02:06:07 2009 From: hs.samix at gmail.com (H.S.) Date: Mon, 11 May 2009 22:06:07 -0400 Subject: [Ekiga-list] updated Debain Testing and Ekiga segfaults Message-ID: Hello, I did an upgdate of my Debian Testing machine earlier today and now when I start Ekiga, it segfaults. The debugging info from Ekiga is: $> ekiga -d4 2009/05/11 10:29:30.042 0:00.842 ekiga ekiga Version 2.0.12 by on Unix Linux (2.6.26-2-686-i686) at 2009/5/11 10:29:30.042 2009/05/11 10:29:30.353 0:01.152 ekiga Detected audio plugins: ALSA 2009/05/11 10:29:30.353 0:01.152 ekiga Detected video plugins: Picture,V4L 2009/05/11 10:29:30.353 0:01.152 ekiga Detected audio plugins: ALSA 2009/05/11 10:29:30.353 0:01.152 ekiga Detected video plugins: Picture,V4L 2009/05/11 10:29:30.361 0:01.161 ekiga Detected the following audio input devices: Default,Microsoft LifeChat LX-3000 ,Ensoniq AudioPCI with plugin ALSA 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following audio output devices: Default,Microsoft LifeChat LX-3000 ,Ensoniq AudioPCI with plugin ALSA 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following video input devices: StaticPicture,MovingLogo with plugin Picture 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following audio input devices: Default,Microsoft LifeChat LX-3000 ,Ensoniq AudioPCI with plugin ALSA 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following audio output devices: Default,Microsoft LifeChat LX-3000 ,Ensoniq AudioPCI with plugin ALSA 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following video input devices: StaticPicture,MovingLogo with plugin Picture 2009/05/11 10:29:30.399 0:01.198 ekiga PWLib File handle high water mark set: 33 PUDPSocket Segmentation fault This is on Ekiga version 2.0.12-1+nmu1+b1. Anybody have any idea what happened today to cause this problem and how to fix it? Ekiga was working fine till yesterday morning at least. Thanks. -- Please reply to this list only. I read this list on its corresponding newsgroup on gmane.org. Replies sent to my email address are just filtered to a folder in my mailbox and get periodically deleted without ever having been read. From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue May 12 10:40:39 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 12 May 2009 12:40:39 +0200 Subject: [Ekiga-list] updated Debain Testing and Ekiga segfaults In-Reply-To: References: Message-ID: <4A095227.3000502@pu-pm.univ-fcomte.fr> H.S. wrote: > Hello, > > I did an upgdate of my Debian Testing machine earlier today and now when > I start Ekiga, it segfaults. > > The debugging info from Ekiga is: > $> ekiga -d4 > 2009/05/11 10:29:30.042 0:00.842 ekiga ekiga > Version 2.0.12 by on Unix Linux (2.6.26-2-686-i686) at 2009/5/11 > 10:29:30.042 > 2009/05/11 10:29:30.353 0:01.152 ekiga Detected audio plugins: ALSA > 2009/05/11 10:29:30.353 0:01.152 ekiga Detected video plugins: > Picture,V4L > 2009/05/11 10:29:30.353 0:01.152 ekiga Detected audio plugins: ALSA > 2009/05/11 10:29:30.353 0:01.152 ekiga Detected video plugins: > Picture,V4L > 2009/05/11 10:29:30.361 0:01.161 ekiga Detected the following audio > input devices: Default,Microsoft LifeChat LX-3000 ,Ensoniq AudioPCI with > plugin ALSA > 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following audio > output devices: Default,Microsoft LifeChat LX-3000 ,Ensoniq AudioPCI > with plugin ALSA > 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following video > input devices: StaticPicture,MovingLogo with plugin Picture > 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following audio > input devices: Default,Microsoft LifeChat LX-3000 ,Ensoniq AudioPCI with > plugin ALSA > 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following audio > output devices: Default,Microsoft LifeChat LX-3000 ,Ensoniq AudioPCI > with plugin ALSA > 2009/05/11 10:29:30.362 0:01.161 ekiga Detected the following video > input devices: StaticPicture,MovingLogo with plugin Picture > 2009/05/11 10:29:30.399 0:01.198 ekiga PWLib File handle high water > mark set: 33 PUDPSocket > Segmentation fault > > > This is on Ekiga version 2.0.12-1+nmu1+b1. Anybody have any idea what > happened today to cause this problem and how to fix it? Ekiga was > working fine till yesterday morning at least. I am pretty sure it is because a recent upload of pwlib, whose ekiga depends. I have contacted several times ekiga team to upload the new version, still ekiga v3 is not yet uploaded. :o( Maybe you could make a lobby to them in order to upload ekiga 3 (everything is in place, needs just upload). -- Eugen From hs.samix at gmail.com Tue May 12 14:09:59 2009 From: hs.samix at gmail.com (H.S.) Date: Tue, 12 May 2009 10:09:59 -0400 Subject: [Ekiga-list] updated Debain Testing and Ekiga segfaults In-Reply-To: <4A095227.3000502@pu-pm.univ-fcomte.fr> References: <4A095227.3000502@pu-pm.univ-fcomte.fr> Message-ID: Eugen Dedu wrote: > H.S. wrote: >> Hello, >> >> I did an upgdate of my Debian Testing machine earlier today and now when >> I start Ekiga, it segfaults. >> >> This is on Ekiga version 2.0.12-1+nmu1+b1. Anybody have any idea what >> happened today to cause this problem and how to fix it? Ekiga was >> working fine till yesterday morning at least. > > I am pretty sure it is because a recent upload of pwlib, whose ekiga > depends. I have contacted several times ekiga team to upload the new > version, still ekiga v3 is not yet uploaded. :o( > > Maybe you could make a lobby to them in order to upload ekiga 3 > (everything is in place, needs just upload). > I tried to file bug report in Debian for this problem, but noticed that somebody already has filed it regarding Sid (Debian Unstable) a few weeks ago. I chimed in too and have added that the problem is in Testing as well now. You seem to be right. libpt was upgraded yesterday in my machine. From aptitude log: [UPGRADE] libpt-1.10.10 1.10.10-2 -> 1.10.10-3 [UPGRADE] libpt-1.10.10-plugins-alsa 1.10.10-2 -> 1.10.10-3 [UPGRADE] libpt-1.10.10-plugins-v4l 1.10.10-2 -> 1.10.10-3 Also, Debian Unstable has new Ekiga added: ekiga | 3.0.1-1 So I suppose it is just a matter of days till it trickles down to Debian Testing. Thanks. -- Please reply to this list only. I read this list on its corresponding newsgroup on gmane.org. Replies sent to my email address are just filtered to a folder in my mailbox and get periodically deleted without ever having been read. From devel at tootai.net Tue May 12 21:55:29 2009 From: devel at tootai.net (Daniel Huhardeaux) Date: Tue, 12 May 2009 23:55:29 +0200 Subject: [Ekiga-list] updated Debain Testing and Ekiga segfaults In-Reply-To: References: <4A095227.3000502@pu-pm.univ-fcomte.fr> Message-ID: <4A09F051.1000205@tootai.net> H.S. a ?crit : > [...] > I tried to file bug report in Debian for this problem, but noticed that > somebody already has filed it regarding Sid (Debian Unstable) a few > weeks ago. I chimed in too and have added that the problem is in Testing > as well now. > > You seem to be right. libpt was upgraded yesterday in my machine. From > aptitude log: > [UPGRADE] libpt-1.10.10 1.10.10-2 -> 1.10.10-3 > [UPGRADE] libpt-1.10.10-plugins-alsa 1.10.10-2 -> 1.10.10-3 > [UPGRADE] libpt-1.10.10-plugins-v4l 1.10.10-2 -> 1.10.10-3 > > Also, Debian Unstable has new Ekiga added: > ekiga | 3.0.1-1 > > So I suppose it is just a matter of days till it trickles down to Debian > Testing. > Hi, in SID there is something messi: I removed Ekiga 2~3 weeks ago to start a fresh install and since then I was unable to reinstall Ekiga, always dependencies problem. Now it is: Les paquets suivants sont CASS?S : ekiga Les NOUVEAUX paquets suivants vont ?tre install?s : libpt-1.10.10{a} libpt-1.10.10-plugins-alsa{a} libpt-1.10.10-plugins-v4l{a} 0 paquets mis ? jour, 4 nouvellement install?s, 0 ? enlever et 0 non mis ? jour. Il est n?cessaire de t?l?charger 9712ko d'archives. Apr?s d?paquetage, 21,7Mo seront utilis?s. Les paquets suivants ont des d?pendances non satisfaites : ekiga: D?pend: libopal-2.2 (>= 2.2.11~) qui est un paquet virtuel ou libopal-2.2-develop (>= 2.2.11~) qui est un paquet virtuel Les actions suivantes permettront de r?soudre ces d?pendances : Conserver les paquets suivants dans leur version actuelle : ekiga [Non install?] and ~>sudo aptitude search libopal c libopal-cvs - Open Phone Abstraction Library - successor of OpenH323 p libopal-dev - OPAL library header files p libopal-doc - OPAL library documentation files p libopal-snapshot - Open Phone Abstraction Library - successor of OpenH323 - svn snapshot p libopal-snapshot-dbg - OPAL library debug symbols - svn snapshot p libopal-snapshot-dev - OPAL library header files - svn snapshot p libopal-snapshot-doc - OPAL library documentation files - svn snapshot p libopal-snapshot-plugins-non-free - OPAL non-free codecs (iLBC, h264, h263-1998, mp4v-es) p libopal-snapshot-plugins-non-free-dbg - OPAL non-free codecs, library debug symbols c libopal3.3-beta1 - Open Phone Abstraction Library - successor of OpenH323 - svn snapshot i libopal3.4.1 - Open Phone Abstraction Library - successor of OpenH323 - svn snapshot c libopal3.4.2 - Open Phone Abstraction Library - successor of OpenH323 - svn snapshot p libopal3.6.1 - Open Phone Abstraction Library - successor of OpenH323 p libopal3.6.1-dbg - OPAL library debug symbols So no libopal-2.2 anymore! -- Daniel From zhang.wei.qd at gmail.com Wed May 13 06:28:29 2009 From: zhang.wei.qd at gmail.com (wei zhang) Date: Wed, 13 May 2009 14:28:29 +0800 Subject: [Ekiga-list] ekiga video size Message-ID: <87731b90905122328t2be51d84gd3ef3c169ddc9a94@mail.gmail.com> hi? I have a video device that can output the maximum resolution of 1280X1024, I would like to ask whether ekiga to support such a resolution?if possible, I should be in how to set up ekiga?I am very worried, please help me????thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: From chinku.linux at gmail.com Wed May 13 06:46:28 2009 From: chinku.linux at gmail.com (chaitanya mehandru) Date: Wed, 13 May 2009 12:16:28 +0530 Subject: [Ekiga-list] ekiga video size In-Reply-To: <87731b90905122328t2be51d84gd3ef3c169ddc9a94@mail.gmail.com> References: <87731b90905122328t2be51d84gd3ef3c169ddc9a94@mail.gmail.com> Message-ID: <24b40b2b0905122346n2cb40654i7cebb03cdf20da54@mail.gmail.com> Ekiga 3.0.2 supports an image size upto 704X576. The support for webcams that can output higher resolutions is being implemented by ekiga developers. 2009/5/13 wei zhang > hi? > I have a video device that can output the maximum resolution of 1280X1024, > I would like to ask whether ekiga to support such a resolution?if possible, > I should be in how to set up ekiga?I am very worried, please help > me????thanks > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From chinku.linux at gmail.com Wed May 13 08:26:43 2009 From: chinku.linux at gmail.com (chaitanya mehandru) Date: Wed, 13 May 2009 13:56:43 +0530 Subject: [Ekiga-list] IPP codecs support for fully operational H264 on LINUX Message-ID: <24b40b2b0905130126iabc50ccx34fc0243a33281db@mail.gmail.com> Do the IPP codecs support fully operational H264 on LINUX? On the website of ipp codecs, *www.ippcodecs.org*, I just see that H264 is quoted as '*Fully Implemented*' and the operating system is not specified. I am asking such a question because I am using ekiga with IPP codecs for H264 videoconferencing between linux and windows. I see 0/30 fps from ekiga on linux and a 30/0 fps from ekiga on windows which means there is no encode happening. Also, the remote video( local video from linux setup) decoded by ekiga on windows is showing a consistent green colored image. This doesnt happen when i am using the default codecs. Please let me know what should I do to get H264 encoded frames with IPP codecs. I am using IPP codec version 5.3. I have also tried the IPP codec v6.0 but Ekiga seems to be having support until v5.3 only. While using IPP v6.0 I see an error message which says that Ekiga could not find ippcore-5.3.dll. Thanks, Chaitanya -------------- next part -------------- An HTML attachment was scrubbed... URL: From sip.siva.sip at gmail.com Wed May 13 11:39:00 2009 From: sip.siva.sip at gmail.com (Siva) Date: Wed, 13 May 2009 17:09:00 +0530 Subject: [Ekiga-list] Unable to load the source in 'Eclipse IDE(3.4.1)' Message-ID: Hi, I'm the new member of this team. I'm working with 'ekiga-3.2.0' and I have compiled the source without any issues. I have to work the source in 'Eclipse IDE (3.4.1)'. But when imported the source 'ekiga-3.2.0', in my project, its shows some errors. The error is mentioned below. **** Build of configuration Debug for project Ekiga **** make all Building file: ../src/ekiga.cpp Invoking: GCC C++ Compiler g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"src/ekiga.d" -MT"src/ekiga.d" -o"src/ekiga.o" "../src/ekiga.cpp" ../src/ekiga.cpp:39:20: error: config.h: No such file or directory In file included from ../src/ekiga.h:44, from ../src/ekiga.cpp:41: ../src/common.h:42:28: warning: opal/buildopts.h: No such file or directory ../src/common.h:47:26: warning: opal/manager.h: No such file or directory ../src/common.h:48:23: warning: opal/pcss.h: No such file or directory ../src/common.h:50:23: warning: h323/h323.h: No such file or directory ../src/common.h:51:21: warning: sip/sip.h: No such file or directory ../src/common.h:53:18: warning: glib.h: No such file or directory ../src/common.h:54:21: warning: gtk/gtk.h: No such file or directory In file included from ../src/ekiga.cpp:41: ../src/ekiga.h:46:22: error: services.h: No such file or directory ../src/ekiga.h:47:26: error: runtime-glib.h: No such file or directory ../src/ekiga.h:49:24: error: statusicon.h: No such file or directory ../src/ekiga.cpp:42:23: error: callbacks.h: No such file or directory ../src/ekiga.cpp:43:25: error: preferences.h: No such file or directory ../src/ekiga.cpp:44:25: error: chat-window.h: No such file or directory ../src/ekiga.cpp:45:23: error: assistant.h: No such file or directory ../src/ekiga.cpp:47:22: error: accounts.h: No such file or directory ../src/ekiga.cpp:48:18: error: main.h: No such file or directory ../src/ekiga.cpp:49:18: error: misc.h: No such file or directory ../src/ekiga.cpp:55:22: error: gmdialog.h: No such file or directory ../src/ekiga.cpp:56:26: error: gmstockicons.h: No such file or directory ../src/ekiga.cpp:57:20: error: gmconf.h: No such file or directory ../src/ekiga.cpp:59:20: error: engine.h: No such file or directory In file included from ../src/ekiga.cpp:41: ../src/ekiga.h:59: error: expected class-name before ?{? token ../src/ekiga.h:60: error: ?Comparison? does not name a type ../src/ekiga.h:108: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:108: error: expected ?;? before ?*? token ../src/ekiga.h:115: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:115: error: expected ?;? before ?*? token ../src/ekiga.h:122: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:122: error: expected ?;? before ?*? token ../src/ekiga.h:129: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:129: error: expected ?;? before ?*? token ../src/ekiga.h:136: error: ISO C++ forbids declaration of ?StatusIcon? with no type ../src/ekiga.h:136: error: expected ?;? before ?*? token ../src/ekiga.h:147: error: ?Ekiga? has not been declared ../src/ekiga.h:147: error: ISO C++ forbids declaration of ?ServiceCore? with no type ../src/ekiga.h:147: error: expected ?;? before ?*? token ../src/ekiga.h:170: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:170: error: expected ?;? before ?*? token ../src/ekiga.h:171: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:171: error: expected ?;? before ?*? token ../src/ekiga.h:172: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:172: error: expected ?;? before ?*? token ../src/ekiga.h:173: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:173: error: expected ?;? before ?*? token ../src/ekiga.h:174: error: ISO C++ forbids declaration of ?GtkWidget? with no type ../src/ekiga.h:174: error: expected ?;? before ?*? token ../src/ekiga.h:175: error: ISO C++ forbids declaration of ?StatusIcon? with no type ../src/ekiga.h:175: error: expected ?;? before ?*? token ../src/ekiga.h: In member function ?virtual PBoolean GnomeMeeting::InternalIsDescendant(const char*) const?: ../src/ekiga.h:60: error: ?PProcess? has not been declared ../src/ekiga.h: In member function ?virtual const char* GnomeMeeting::GetClass(unsigned int) const?: ../src/ekiga.h:60: error: ?PProcess? has not been declared ../src/ekiga.cpp: In constructor ?GnomeMeeting::GnomeMeeting()?: ../src/ekiga.cpp:68: error: class ?GnomeMeeting? does not have any field named ?PProcess? ../src/ekiga.cpp:68: error: ?MAJOR_VERSION? was not declared in this scope ../src/ekiga.cpp:68: error: ?MINOR_VERSION? was not declared in this scope ../src/ekiga.cpp:68: error: ?BUILD_TYPE? was not declared in this scope ../src/ekiga.cpp:68: error: ?BUILD_NUMBER? was not declared in this scope ../src/ekiga.cpp:75: error: ?assistant_window? was not declared in this scope ../src/ekiga.cpp:76: error: ?prefs_window? was not declared in this scope ../src/ekiga.cpp: In member function ?void GnomeMeeting::Exit()?: ../src/ekiga.cpp:91: error: ?prefs_window? was not declared in this scope ../src/ekiga.cpp:92: error: ?gtk_widget_destroy? was not declared in this scope ../src/ekiga.cpp:93: error: ?prefs_window? was not declared in this scope ../src/ekiga.cpp:95: error: ?main_window? was not declared in this scope ../src/ekiga.cpp:96: error: ?gtk_widget_destroy? was not declared in this scope ../src/ekiga.cpp:97: error: ?main_window? was not declared in this scope ../src/ekiga.cpp:99: error: ?assistant_window? was not declared in this scope ../src/ekiga.cpp:100: error: ?gtk_widget_destroy? was not declared in this scope ../src/ekiga.cpp:101: error: ?assistant_window? was not declared in this scope ../src/ekiga.cpp:103: error: ?accounts_window? was not declared in this scope ../src/ekiga.cpp:104: error: ?gtk_widget_destroy? was not declared in this scope ../src/ekiga.cpp:105: error: ?accounts_window? was not declared in this scope ../src/ekiga.cpp:107: error: ?statusicon? was not declared in this scope ../src/ekiga.cpp:108: error: ?g_object_unref? was not declared in this scope ../src/ekiga.cpp:109: error: ?statusicon? was not declared in this scope ../src/ekiga.cpp: At global scope: ../src/ekiga.cpp:119: error: ?Ekiga? has not been declared ../src/ekiga.cpp:119: error: expected constructor, destructor, or type conversion before ?*? token ../src/ekiga.cpp:135: error: expected constructor, destructor, or type conversion before ?*? token ../src/ekiga.cpp:142: error: expected constructor, destructor, or type conversion before ?*? token make: *** [src/ekiga.o] Error 1 Can you please help me to solve this problem ?. It will helps me to work with 'Ekiga'. Thanks in Advance ... Regards Siva -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Wed May 13 12:29:35 2009 From: michel.memeteau at gmail.com (michel memeteau) Date: Wed, 13 May 2009 14:29:35 +0200 Subject: [Ekiga-list] Unable to load the source in 'Eclipse IDE(3.4.1)' In-Reply-To: References: Message-ID: Siva : it seems 50 % of the dependencies are not present. opal, Ptlib etc... You can read of a lot of info in the Wiki on compiling Ekiga for various platform On Wed, May 13, 2009 at 1:39 PM, Siva wrote: > Hi, > I'm the new member of this team. I'm working with 'ekiga-3.2.0' and I > have compiled the source without any issues. I have to work the source in > 'Eclipse IDE (3.4.1)'. But when imported the source 'ekiga-3.2.0', in my > project, its shows some errors. The error is mentioned below. > > > **** Build of configuration Debug for project Ekiga **** > > make all > Building file: ../src/ekiga.cpp > Invoking: GCC C++ Compiler > g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"src/ekiga.d" > -MT"src/ekiga.d" -o"src/ekiga.o" "../src/ekiga.cpp" > ../src/ekiga.cpp:39:20: error: config.h: No such file or directory > In file included from ../src/ekiga.h:44, > from ../src/ekiga.cpp:41: > ../src/common.h:42:28: warning: opal/buildopts.h: No such file or directory > ../src/common.h:47:26: warning: opal/manager.h: No such file or directory > ../src/common.h:48:23: warning: opal/pcss.h: No such file or directory > ../src/common.h:50:23: warning: h323/h323.h: No such file or directory > ../src/common.h:51:21: warning: sip/sip.h: No such file or directory > ../src/common.h:53:18: warning: glib.h: No such file or directory > ../src/common.h:54:21: warning: gtk/gtk.h: No such file or directory > In file included from ../src/ekiga.cpp:41: > ../src/ekiga.h:46:22: error: services.h: No such file or directory > ../src/ekiga.h:47:26: error: runtime-glib.h: No such file or directory > ../src/ekiga.h:49:24: error: statusicon.h: No such file or directory > ../src/ekiga.cpp:42:23: error: callbacks.h: No such file or directory > ../src/ekiga.cpp:43:25: error: preferences.h: No such file or directory > ../src/ekiga.cpp:44:25: error: chat-window.h: No such file or directory > ../src/ekiga.cpp:45:23: error: assistant.h: No such file or directory > ../src/ekiga.cpp:47:22: error: accounts.h: No such file or directory > ../src/ekiga.cpp:48:18: error: main.h: No such file or directory > ../src/ekiga.cpp:49:18: error: misc.h: No such file or directory > ../src/ekiga.cpp:55:22: error: gmdialog.h: No such file or directory > ../src/ekiga.cpp:56:26: error: gmstockicons.h: No such file or directory > ../src/ekiga.cpp:57:20: error: gmconf.h: No such file or directory > ../src/ekiga.cpp:59:20: error: engine.h: No such file or directory > In file included from ../src/ekiga.cpp:41: > ../src/ekiga.h:59: error: expected class-name before ?{? token > ../src/ekiga.h:60: error: ?Comparison? does not name a type > ../src/ekiga.h:108: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:108: error: expected ?;? before ?*? token > ../src/ekiga.h:115: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:115: error: expected ?;? before ?*? token > ../src/ekiga.h:122: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:122: error: expected ?;? before ?*? token > ../src/ekiga.h:129: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:129: error: expected ?;? before ?*? token > ../src/ekiga.h:136: error: ISO C++ forbids declaration of ?StatusIcon? with > no type > ../src/ekiga.h:136: error: expected ?;? before ?*? token > ../src/ekiga.h:147: error: ?Ekiga? has not been declared > ../src/ekiga.h:147: error: ISO C++ forbids declaration of ?ServiceCore? > with no type > ../src/ekiga.h:147: error: expected ?;? before ?*? token > ../src/ekiga.h:170: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:170: error: expected ?;? before ?*? token > ../src/ekiga.h:171: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:171: error: expected ?;? before ?*? token > ../src/ekiga.h:172: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:172: error: expected ?;? before ?*? token > ../src/ekiga.h:173: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:173: error: expected ?;? before ?*? token > ../src/ekiga.h:174: error: ISO C++ forbids declaration of ?GtkWidget? with > no type > ../src/ekiga.h:174: error: expected ?;? before ?*? token > ../src/ekiga.h:175: error: ISO C++ forbids declaration of ?StatusIcon? with > no type > ../src/ekiga.h:175: error: expected ?;? before ?*? token > ../src/ekiga.h: In member function ?virtual PBoolean > GnomeMeeting::InternalIsDescendant(const char*) const?: > ../src/ekiga.h:60: error: ?PProcess? has not been declared > ../src/ekiga.h: In member function ?virtual const char* > GnomeMeeting::GetClass(unsigned int) const?: > ../src/ekiga.h:60: error: ?PProcess? has not been declared > ../src/ekiga.cpp: In constructor ?GnomeMeeting::GnomeMeeting()?: > ../src/ekiga.cpp:68: error: class ?GnomeMeeting? does not have any field > named ?PProcess? > ../src/ekiga.cpp:68: error: ?MAJOR_VERSION? was not declared in this scope > ../src/ekiga.cpp:68: error: ?MINOR_VERSION? was not declared in this scope > ../src/ekiga.cpp:68: error: ?BUILD_TYPE? was not declared in this scope > ../src/ekiga.cpp:68: error: ?BUILD_NUMBER? was not declared in this scope > ../src/ekiga.cpp:75: error: ?assistant_window? was not declared in this > scope > ../src/ekiga.cpp:76: error: ?prefs_window? was not declared in this scope > ../src/ekiga.cpp: In member function ?void GnomeMeeting::Exit()?: > ../src/ekiga.cpp:91: error: ?prefs_window? was not declared in this scope > ../src/ekiga.cpp:92: error: ?gtk_widget_destroy? was not declared in this > scope > ../src/ekiga.cpp:93: error: ?prefs_window? was not declared in this scope > ../src/ekiga.cpp:95: error: ?main_window? was not declared in this scope > ../src/ekiga.cpp:96: error: ?gtk_widget_destroy? was not declared in this > scope > ../src/ekiga.cpp:97: error: ?main_window? was not declared in this scope > ../src/ekiga.cpp:99: error: ?assistant_window? was not declared in this > scope > ../src/ekiga.cpp:100: error: ?gtk_widget_destroy? was not declared in this > scope > ../src/ekiga.cpp:101: error: ?assistant_window? was not declared in this > scope > ../src/ekiga.cpp:103: error: ?accounts_window? was not declared in this > scope > ../src/ekiga.cpp:104: error: ?gtk_widget_destroy? was not declared in this > scope > ../src/ekiga.cpp:105: error: ?accounts_window? was not declared in this > scope > ../src/ekiga.cpp:107: error: ?statusicon? was not declared in this scope > ../src/ekiga.cpp:108: error: ?g_object_unref? was not declared in this > scope > ../src/ekiga.cpp:109: error: ?statusicon? was not declared in this scope > ../src/ekiga.cpp: At global scope: > ../src/ekiga.cpp:119: error: ?Ekiga? has not been declared > ../src/ekiga.cpp:119: error: expected constructor, destructor, or type > conversion before ?*? token > ../src/ekiga.cpp:135: error: expected constructor, destructor, or type > conversion before ?*? token > ../src/ekiga.cpp:142: error: expected constructor, destructor, or type > conversion before ?*? token > make: *** [src/ekiga.o] Error 1 > > > Can you please help me to solve this problem ?. It will helps me to work > with 'Ekiga'. > > Thanks in Advance ... > > Regards > Siva > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0974763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at ippi.fr jabber/GTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From ben at lauretland.com Wed May 13 13:02:02 2009 From: ben at lauretland.com (Benjamin Lauret) Date: Wed, 13 May 2009 15:02:02 +0200 Subject: [Ekiga-list] EKiga windows + Sphere AF. In-Reply-To: References: Message-ID: <4A0AC4CA.2060600@lauretland.com> Hi Guys, I tried to plug today a logitech spher AF into ekiga window 3.0.3 Actually, I did two things. Just plugged cam and launch ekiga. It worked fine. Then I installed the Sw from logitech (and I guess the driver), then launched ekiga. Now it just crash the computer. Anyway the webcam can be used with Skype or others applications. I wonder if someone already had that kind of issue. Rgds, Ben From dotancohen at gmail.com Thu May 14 13:55:43 2009 From: dotancohen at gmail.com (Dotan Cohen) Date: Thu, 14 May 2009 16:55:43 +0300 Subject: [Ekiga-list] Ekiga website Message-ID: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> I am a Skype user who has recently been introduced to Ekiga. Of course, I now have the task of convincing some of my contacts to use Ekiga, so I went to the Ekiga website to see what Windows users would be up against in installing the app. I did not even get to download the application before realizing that Windows users would not be able to handle Ekiga. My criticism is below, please keep in mind that it is constructive criticism intended to help Ekiga, not a "rant" or troll. This is copied verbatim from my post on the ubuntu-users list: 1) If the user looks for "ekiga" via google, then the url is gnomemeeting.org for some reason. What is that? (Yes, _I_ know, but should I have to explain that to potential users?). If the user types in ekiga.com then she arrives at ekiga.net. Redirect? That scares Windows users, who suspect malware and trickery. In my Windows days, I would have left right here. 2) "Downloads: Choose your distribution below and start downloading." What is a distribution? How do I download this? Where is the big green "download here" animated GIF? 3) If the user happens to find the Windows link (and even knows that is what she needs) then she gets a page with no files to download! She will _not_ open the README file to find what she needs! 4) If the user actually did find and open the README file under Windows downloads, the file contains this single line of text (no hyperlink): Please download from : http://snapshots.ekiga.net/snapshots/win32/archives/ 5) If the user actually follows the hyperlink then she goes to an Apache directory listing. This is what she sees: [ ] ekiga-setup-3.0.1beta-7144.exe 02-Oct-2008 23:08 18M [ ] ekiga-setup-3.0.1beta-7144d.exe 02-Oct-2008 23:05 61M [ ] ekiga-setup-3.0.1beta-7205.exe 14-Oct-2008 20:31 18M [ ] ekiga-setup-3.0.1beta-7205d.exe 14-Oct-2008 20:31 61M [ ] ekiga-setup-3.0.2beta-7300.exe 30-Oct-2008 21:33 22M [ ] ekiga-setup-3.0.2beta-7300d.exe 30-Oct-2008 21:30 65M [ ] ekiga-setup-3.0.2beta-7316.exe 02-Nov-2008 09:49 22M [ ] ekiga-setup-3.0.2beta-7316d.exe 02-Nov-2008 09:59 65M Which one should she click on? How much further do you think she is going to get? -- Dotan Cohen http://what-is-what.com http://gibberish.co.il From simos.lists at googlemail.com Thu May 14 14:40:35 2009 From: simos.lists at googlemail.com (Simos Xenitellis) Date: Thu, 14 May 2009 15:40:35 +0100 Subject: [Ekiga-list] Ekiga website In-Reply-To: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> Message-ID: <598e9210905140740u71466ae8h8f987b7531923efa@mail.gmail.com> These are good and valid concerns. I am trying to think how to implement those changes. On Thu, May 14, 2009 at 2:55 PM, Dotan Cohen wrote: > I am a Skype user who has recently been introduced to Ekiga. Of > course, I now have the task of convincing some of my contacts to use > Ekiga, so I went to the Ekiga website to see what Windows users would > be up against in installing the app. I did not even get to download > the application before realizing that Windows users would not be able > to handle Ekiga. My criticism is below, please keep in mind that it is > constructive criticism intended to help Ekiga, not a "rant" or troll. > > This is copied verbatim from my post on the ubuntu-users list: > > 1) If the user looks for "ekiga" via google, then the url is > gnomemeeting.org for some reason. What is that? (Yes, _I_ know, but > should I have to explain that to potential users?). If the user types > in ekiga.com then she arrives at ekiga.net. Redirect? That scares > Windows users, who suspect malware and trickery. In my Windows days, I > would have left right here. $ wget -S www.gnomemeeting.org --2009-05-14 15:35:26-- http://www.gnomemeeting.org/ Resolving www.gnomemeeting.org... 130.104.229.225 Connecting to www.gnomemeeting.org|130.104.229.225|:80... connected. HTTP request sent, awaiting response... HTTP/1.1 200 OK Date: Thu, 14 May 2009 14:35:26 GMT Server: Apache/2.0.52 (CentOS) Connection: close Content-Type: text/html; charset=UTF-8 Length: unspecified [text/html] There should be a redirect to Ekiga.net (Apache mod_rewrite) so that search engines elevate the Ekiga website. For example, as Mozilla does with 'mozilla.net': > wget -S www.mozilla.net --2009-05-14 15:38:39-- http://www.mozilla.net/ Resolving www.mozilla.net... 63.245.209.24 Connecting to www.mozilla.net|63.245.209.24|:80... connected. HTTP request sent, awaiting response... HTTP/1.1 302 Found Date: Thu, 14 May 2009 14:38:39 GMT Server: Apache/2.2.3 (Red Hat) Location: http://www.mozilla.com/ Content-Length: 288 Keep-Alive: timeout=20, max=972 Connection: Keep-Alive Content-Type: text/html; charset=iso-8859-1 Location: http://www.mozilla.com/ [following] --2009-05-14 15:38:39-- http://www.mozilla.com/ Resolving www.mozilla.com... 63.245.213.13 Connecting to www.mozilla.com|63.245.213.13|:80... connected. ... This requires web admin access to ekiga.net. > 2) "Downloads: Choose your distribution below and start downloading." > What is a distribution? How do I download this? Where is the big green > "download here" animated GIF? > > 3) If the user happens to find the Windows link (and even knows that > is what she needs) then she gets a page with no files to download! She > will _not_ open the README file to find what she needs! > > 4) If the user actually did find and open the README file under > Windows downloads, the file contains this single line of text (no > hyperlink): > Please download from : http://snapshots.ekiga.net/snapshots/win32/archives/ > > 5) If the user actually follows the hyperlink then she goes to an > Apache directory listing. This is what she sees: > [ ? ] ekiga-setup-3.0.1beta-7144.exe ?02-Oct-2008 23:08 ? 18M > [ ? ] ekiga-setup-3.0.1beta-7144d.exe 02-Oct-2008 23:05 ? 61M > [ ? ] ekiga-setup-3.0.1beta-7205.exe ?14-Oct-2008 20:31 ? 18M > [ ? ] ekiga-setup-3.0.1beta-7205d.exe 14-Oct-2008 20:31 ? 61M > [ ? ] ekiga-setup-3.0.2beta-7300.exe ?30-Oct-2008 21:33 ? 22M > [ ? ] ekiga-setup-3.0.2beta-7300d.exe 30-Oct-2008 21:30 ? 65M > [ ? ] ekiga-setup-3.0.2beta-7316.exe ?02-Nov-2008 09:49 ? 22M > [ ? ] ekiga-setup-3.0.2beta-7316d.exe 02-Nov-2008 09:59 ? 65M > > Which one should she click on? How much further do you think she is > going to get? For these, it is an issue of getting access to Ekiga CMS and making the enhancements. Who can give that? Simos From dotancohen at gmail.com Thu May 14 15:00:30 2009 From: dotancohen at gmail.com (Dotan Cohen) Date: Thu, 14 May 2009 18:00:30 +0300 Subject: [Ekiga-list] Ekiga website In-Reply-To: <598e9210905140740u71466ae8h8f987b7531923efa@mail.gmail.com> References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> <598e9210905140740u71466ae8h8f987b7531923efa@mail.gmail.com> Message-ID: <880dece00905140800o79a71137x9e92901ba7c01200@mail.gmail.com> > These are good and valid concerns. > I am trying to think how to implement those changes. > Thank you for taking me seriously, Simos. I hate to post to a new list with a post so critical. Hopefully as things improve we can help spread the use of Ekiga. Right now I have no users to test my installation with! -- Dotan Cohen http://what-is-what.com http://gibberish.co.il From dotancohen at gmail.com Thu May 14 15:03:07 2009 From: dotancohen at gmail.com (Dotan Cohen) Date: Thu, 14 May 2009 18:03:07 +0300 Subject: [Ekiga-list] Ekiga locking up when hanging up test call Message-ID: <880dece00905140803y38896731o4ef45f0af1789b27@mail.gmail.com> I tried making a test call with Ekiga 3.2.0 with the Test Call service. When I tried to hang up, Ekiga locked up and I could not perform any functions. There was no terminal output for the entire session, which included me configuring the client: jaunty2 at laptop:~$ ekiga Killed jaunty2 at laptop:~$ The "killed" happended when I clicked "close" from the taskbar context menu (KDE). I was told that the application is not responding (I already knew that) and given an option to terminate, which I did. -- Dotan Cohen http://what-is-what.com http://gibberish.co.il From simos.lists at googlemail.com Thu May 14 15:08:41 2009 From: simos.lists at googlemail.com (Simos Xenitellis) Date: Thu, 14 May 2009 16:08:41 +0100 Subject: [Ekiga-list] Ekiga website In-Reply-To: <880dece00905140800o79a71137x9e92901ba7c01200@mail.gmail.com> References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> <598e9210905140740u71466ae8h8f987b7531923efa@mail.gmail.com> <880dece00905140800o79a71137x9e92901ba7c01200@mail.gmail.com> Message-ID: <598e9210905140808x40bb40d3qf5751468acbae565@mail.gmail.com> On Thu, May 14, 2009 at 4:00 PM, Dotan Cohen wrote: >> These are good and valid concerns. >> I am trying to think how to implement those changes. >> > > Thank you for taking me seriously, ?Simos. I hate to post to a new > list with a post so critical. Hopefully as things improve we can help > spread the use of Ekiga. Right now I have no users to test my > installation with! Have a look at http://wiki.ekiga.org/index.php/Fun_Numbers I am 'simosx' on Ekiga. Simos From dotancohen at gmail.com Thu May 14 15:16:03 2009 From: dotancohen at gmail.com (Dotan Cohen) Date: Thu, 14 May 2009 18:16:03 +0300 Subject: [Ekiga-list] Ekiga website In-Reply-To: <598e9210905140808x40bb40d3qf5751468acbae565@mail.gmail.com> References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> <598e9210905140740u71466ae8h8f987b7531923efa@mail.gmail.com> <880dece00905140800o79a71137x9e92901ba7c01200@mail.gmail.com> <598e9210905140808x40bb40d3qf5751468acbae565@mail.gmail.com> Message-ID: <880dece00905140816q54f8bcb1t782907f7a4041259@mail.gmail.com> > Have a look at > http://wiki.ekiga.org/index.php/Fun_Numbers > > I am 'simosx' on Ekiga. > Thanks, I will look at that next week. I'm leaving in just a few minutes. Have a great weekend, I'm starting mine early (new Star Trek film! Yay!). -- Dotan Cohen http://what-is-what.com http://gibberish.co.il From sevmek at free.fr Thu May 14 15:35:34 2009 From: sevmek at free.fr (yannick) Date: Thu, 14 May 2009 17:35:34 +0200 Subject: [Ekiga-list] Ekiga locking up when hanging up test call In-Reply-To: <880dece00905140803y38896731o4ef45f0af1789b27@mail.gmail.com> References: <880dece00905140803y38896731o4ef45f0af1789b27@mail.gmail.com> Message-ID: <4A0C3A46.8050207@free.fr> Dotan Cohen a ?crit : > I tried making a test call with Ekiga 3.2.0 with the Test Call > service. When I tried to hang up, Ekiga locked up and I could not > perform any functions. There was no terminal output for the entire > session, which included me configuring the client: > jaunty2 at laptop:~$ ekiga > Killed > jaunty2 at laptop:~$ > > The "killed" happended when I clicked "close" from the taskbar context > menu (KDE). I was told that the application is not responding (I > already knew that) and given an option to terminate, which I did. > There is a recent update for jaunty. Try to update your system to see if that fix your issue. From jbeard4 at cs.mcgill.ca Thu May 14 19:08:30 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Thu, 14 May 2009 15:08:30 -0400 Subject: [Ekiga-list] STUN support on Windows XP Message-ID: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> Hi, I just installed the latest Ekiga on Windows XP. When installing, it said that it was unable to automatically configure my network, and directed me to the page instructing me to set up port forwarding. This would be fine, except my Linksys WRT54G2 seems to be having some trouble with port forwarding... maybe after I upgrade the firmware, this will have changed. In the meantime, I tried to manually configure STUN, but was unable to find the option in the place where it was located on Ekiga 2.0, namely Protocols -> Network Settings. Is STUN supported in the current Windows build? Please let me know what you think. Thanks, Jake From law_ence.dev at ntlworld.com Thu May 14 19:20:04 2009 From: law_ence.dev at ntlworld.com (ael) Date: Thu, 14 May 2009 20:20:04 +0100 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> Message-ID: <4A0C6EE4.7000505@ntlworld.com> Jacob Beard wrote: > Hi, > > I just installed the latest Ekiga on Windows XP. When installing, it > said that it was unable to automatically configure my network, and > directed me to the page instructing me to set up port forwarding. This > would be fine, except my Linksys WRT54G2 seems to be having some You might be better off with port triggering on that linksys: details on the ekiga wiki. ael From jbeard4 at cs.mcgill.ca Thu May 14 19:48:22 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Thu, 14 May 2009 15:48:22 -0400 Subject: [Ekiga-list] STUN support on Windows XP Message-ID: <8e648abd0905141248g3f790bbfx7ccc5055b6579425@mail.gmail.com> Hi, thanks for the reply. I actually think it's the DSL modem that is more likely to be the cause of the problems. Right now it appears to be configured to use NAT, as opposed to acting as a network bridge, and it doesn't present any configuration options through its web interface. So the PC now is behind a double NAT :( I've found some info on how to configure the modem: http://www.dslreports.com/forum/remark,17538756 But, unfortunately, I'm actually doing all of this setup for my girlfriend (she's graciously giving me the opportunity to migrate her away from Skype), and I don't have access to the DSL username and password, which I would need to configure the router after turning the modem into a bridge. So, it looks like my only hope right now might be STUN. Does anyone have any idea as to why this feature might not be exposed for me on Ekiga 3 on Windows? Please let me know. Thanks, Jake Jacob Beard wrote: > Hi, > > I just installed the latest Ekiga on Windows XP. When installing, it > said that it was unable to automatically configure my network, and > directed me to the page instructing me to set up port forwarding. This > would be fine, except my Linksys WRT54G2 seems to be having some > >You might be better off with port triggering on that linksys: details on the ekiga wiki. ael From mike at cchtml.com Thu May 14 19:50:38 2009 From: mike at cchtml.com (Michael Cronenworth) Date: Thu, 14 May 2009 14:50:38 -0500 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> Message-ID: <4A0C760E.1090301@cchtml.com> -------- Original Message -------- Subject: [Ekiga-list] STUN support on Windows XP From: Jacob Beard To: ekiga-list at gnome.org Date: 05/14/2009 02:08 PM > > Please let me know what you think. Thanks, STUN has nothing to do with Windows. It's provided by Ekiga and ekiga.net. Your issue is related to your local network. From jbeard4 at cs.mcgill.ca Thu May 14 20:05:59 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Thu, 14 May 2009 16:05:59 -0400 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <4A0C760E.1090301@cchtml.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> <4A0C760E.1090301@cchtml.com> Message-ID: <8e648abd0905141305o63c1e6dfpe646c84de87676e2@mail.gmail.com> On Thu, May 14, 2009 at 3:50 PM, Michael Cronenworth wrote: > -------- Original Message -------- > Subject: [Ekiga-list] STUN support on Windows XP > From: Jacob Beard > To: ekiga-list at gnome.org > Date: 05/14/2009 02:08 PM > >> >> Please let me know what you think. Thanks, > > > STUN has nothing to do with Windows. It's provided by Ekiga and ekiga.net. Yes, that's true. I'm just confused as to why the option to configure STUN is not exposed in the user interface in Ekiga 3 on Windows. I might just be missing it though, as the only thing I have to compare it to right now is Ekiga 2 on Ubuntu. > Your issue is related to your local network. > I believe there are two issues here: the first being that I cannot find the STUN configuration options in the Ekiga 3 UI; and the second being my network configuration. I'd appreciate any guidance you can offer on either of these issues, including whether STUN is not an appropriate solution to the problem of being behind a double NAT. Please let me know what you think. Thanks, Jake From mike at cchtml.com Thu May 14 20:12:09 2009 From: mike at cchtml.com (Michael Cronenworth) Date: Thu, 14 May 2009 15:12:09 -0500 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <8e648abd0905141305o63c1e6dfpe646c84de87676e2@mail.gmail.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> <4A0C760E.1090301@cchtml.com> <8e648abd0905141305o63c1e6dfpe646c84de87676e2@mail.gmail.com> Message-ID: <4A0C7B19.1030804@cchtml.com> -------- Original Message -------- Subject: Re: [Ekiga-list] STUN support on Windows XP From: Jacob Beard To: Michael Cronenworth Date: 05/14/2009 03:05 PM > I believe there are two issues here: the first being that I cannot > find the STUN configuration options in the Ekiga 3 UI; and the second > being my network configuration. I'd appreciate any guidance you can > offer on either of these issues, including whether STUN is not an > appropriate solution to the problem of being behind a double NAT. > Ekiga 3 does not give you STUN options anymore. There were many changes inbetween version 2 and 3. Why do you think there should be STUN options? From joerlend.schinstad at gmail.com Thu May 14 20:33:36 2009 From: joerlend.schinstad at gmail.com (Jo-Erlend Schinstad) Date: Thu, 14 May 2009 22:33:36 +0200 Subject: [Ekiga-list] Ekiga website In-Reply-To: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> Message-ID: [snip] 2009/5/14 Dotan Cohen : > I am a Skype user who has recently been introduced to Ekiga. Of > course, I now have the task of convincing some of my contacts to use > Ekiga [snip] I just wanted to comment on the fact that unlike Skype, Ekiga uses real VoIP protocols. Skype, on the other hand, uses a proprietary protocol that forces everyone to use Skype. If you use Ekiga, then your friends doesn't necessarily need to use Ekiga. They can use any real VoIP client capable of SIP or H.323, be it a softphone or a physical phone, like ones from Cisco. I really don't understand why anyone would want to submit to Skype, seeing how they're more expensive than their competitors in many countries, and cannot even provide connections to the "real" telephony networks in many countries. Not to mention the fact that they use force to keep their customers from choosing other service providers. In my experience, once people are made aware of these issues, they're not so hesitant about switching to real internet telephony services which are free and also gives you the freedom of choice. Good luck! Jo-Erlend Schinstad From jbeard4 at cs.mcgill.ca Thu May 14 21:13:15 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Thu, 14 May 2009 17:13:15 -0400 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <4A0C7B19.1030804@cchtml.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> <4A0C760E.1090301@cchtml.com> <8e648abd0905141305o63c1e6dfpe646c84de87676e2@mail.gmail.com> <4A0C7B19.1030804@cchtml.com> Message-ID: <8e648abd0905141413s40a65c5fvac5434819338d80e@mail.gmail.com> Bell Canada fail :( The SpeedStream 5200 ADSL modem support neither port forwarding nor bridged network connection. So, unfortunately, it really does seem like clever NAT traversal is my only hope. Unfortunately, I don't really have an in-depth knowledge of how STUN works, so I don't know the extent that it should be working given my network's peculiarities. Any guidance on this would be appreciated. More replies below: On Thu, May 14, 2009 at 4:12 PM, Michael Cronenworth wrote: > -------- Original Message -------- > Subject: Re: [Ekiga-list] STUN support on Windows XP > From: Jacob Beard > To: Michael Cronenworth > Date: 05/14/2009 03:05 PM > > Ekiga 3 does not give you STUN options anymore. There were many changes > inbetween version 2 and 3. Why do you think there should be STUN options? > Losing the STUN configuration preferences pane between versions 2 and 3 caused a bit of cognitive dissonance. Given the change of major version number, and the change of platform, it wasn't clear to me whether it was simply the UI that had changed, or whether the STUN feature had been removed entirely. I don't have much of an opinion on this besides these first impressions. I'm more concerned with just getting the application to work. In that regard, a STUN configuration screen would be useful, because it at least would allow me to visually verify that Ekiga is configured to use STUN, and thus troubleshoot my problem. If there is another way to accomplish this, I'd greatly appreciate it if you would let me know. Thanks, Jake From otakuj462 at gmail.com Thu May 14 21:21:45 2009 From: otakuj462 at gmail.com (Jake B) Date: Thu, 14 May 2009 17:21:45 -0400 Subject: [Ekiga-list] Ekiga website In-Reply-To: References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> Message-ID: <8e648abd0905141421x4472d73dybd8134db51d3eedc@mail.gmail.com> On Thu, May 14, 2009 at 4:33 PM, Jo-Erlend Schinstad wrote: > I really don't understand why anyone would want to submit to Skype, Skype makes NAT traversal really, really easy, so much that it's a non-issue. I feel like this may be an area where Ekiga is lacking. Please see my other post about trying to get Ekiga to work behind a double-NAT where port forwarding is impossible, for more details in this regard. Just my .02 Thanks, Jake From castromd at tcd.ie Fri May 15 15:52:37 2009 From: castromd at tcd.ie (Daniel Castro) Date: Fri, 15 May 2009 16:52:37 +0100 Subject: [Ekiga-list] Dialing rules? Message-ID: Hello, I'm using ekiga 3.2.0 On my Address Book I have configured my LDAP and I can search and find people. My problem is that what LDAP returns as telephoneNumber is different from what I need to use as the sip uri. To make it more clear, my LDAP search returns: telephoneNumber: +111 22 33 4444 But my call manager is only expecting 4444 as the sip uri. Is there a way to apply dialing rules? Or how can I workaround this? Thanks! -- ________________________ Daniel Castro, M.Sc. +353 083-318-2058 dancasmo at gmail.com castromd at tcd.ie ________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 15 18:05:09 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 15 May 2009 20:05:09 +0200 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> Message-ID: <4A0DAED5.6010703@pu-pm.univ-fcomte.fr> Jacob Beard wrote: > Hi, > > I just installed the latest Ekiga on Windows XP. When installing, it > said that it was unable to automatically configure my network, and > directed me to the page instructing me to set up port forwarding. This > would be fine, except my Linksys WRT54G2 seems to be having some > trouble with port forwarding... maybe after I upgrade the firmware, > this will have changed. In the meantime, I tried to manually configure > STUN, but was unable to find the option in the place where it was > located on Ekiga 2.0, namely Protocols -> Network Settings. Is STUN > supported in the current Windows build? Hi, STUN option (boolean) was removed from the GUI in 3.0 (if I remember correctly) and was added back in 3.2. Still, in 3.0 you can check it on/off in gconf settings, .gconf/apps/ekiga/general/nat - disable_stun. I do not know in Windows where these gconf settings are stored. You can execute ekiga -d 4 | grep STUN to see if it is used (if it is used, you will see a line such as "STUN server replied Symmetric NAT (or other type of NAT)). See http://wiki.ekiga.org/index.php/Debugging_Ekiga#Debugging_Ekiga_on_Windows to see how to use -d 4 on Windows. The purpose of STUN is to allow private addresses (when your machine is behind a NAT, or a router allowing several computers to connect to Internet) to still use VoIP software (and others). So, with few exceptions, you need it, and it is on by default. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 15 18:48:13 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 15 May 2009 20:48:13 +0200 Subject: [Ekiga-list] IPP codecs support for fully operational H264 on LINUX In-Reply-To: <24b40b2b0905130126iabc50ccx34fc0243a33281db@mail.gmail.com> References: <24b40b2b0905130126iabc50ccx34fc0243a33281db@mail.gmail.com> Message-ID: <4A0DB8ED.9030304@pu-pm.univ-fcomte.fr> chaitanya mehandru wrote: > Do the IPP codecs support fully operational H264 on LINUX? On the website of > ipp codecs, *www.ippcodecs.org*, I just see that H264 is quoted as '*Fully > Implemented*' and the operating system is not specified. > I am asking such a question because I am using ekiga with IPP codecs for > H264 videoconferencing between linux and windows. I see 0/30 fps from ekiga > on linux and a 30/0 fps from ekiga on windows which means there is no encode > happening. Also, the remote video( local video from linux setup) decoded by > ekiga on windows is showing a consistent green colored image. This doesnt > happen when i am using the default codecs. > > Please let me know what should I do to get H264 encoded frames with IPP > codecs. I am using IPP codec version 5.3. I do not know. Maybe running ekiga -d 4 will show useful information. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 15 18:49:31 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 15 May 2009 20:49:31 +0200 Subject: [Ekiga-list] updated Debain Testing and Ekiga segfaults In-Reply-To: <4A09F051.1000205@tootai.net> References: <4A095227.3000502@pu-pm.univ-fcomte.fr> <4A09F051.1000205@tootai.net> Message-ID: <4A0DB93B.1070307@pu-pm.univ-fcomte.fr> Daniel Huhardeaux wrote: > H.S. a ?crit : >> [...] >> I tried to file bug report in Debian for this problem, but noticed that >> somebody already has filed it regarding Sid (Debian Unstable) a few >> weeks ago. I chimed in too and have added that the problem is in Testing >> as well now. >> >> You seem to be right. libpt was upgraded yesterday in my machine. From >> aptitude log: >> [UPGRADE] libpt-1.10.10 1.10.10-2 -> 1.10.10-3 >> [UPGRADE] libpt-1.10.10-plugins-alsa 1.10.10-2 -> 1.10.10-3 >> [UPGRADE] libpt-1.10.10-plugins-v4l 1.10.10-2 -> 1.10.10-3 >> >> Also, Debian Unstable has new Ekiga added: >> ekiga | 3.0.1-1 >> >> So I suppose it is just a matter of days till it trickles down to Debian >> Testing. >> > Hi, > > in SID there is something messi: I removed Ekiga 2~3 weeks ago to start > a fresh install and since then I was unable to reinstall Ekiga, always > dependencies problem. Now it is: I hope ekiga v3, with new and correct dependencies, will be uploaded very soon! -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 15 18:52:43 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 15 May 2009 20:52:43 +0200 Subject: [Ekiga-list] EKiga windows + Sphere AF. In-Reply-To: <4A0AC4CA.2060600@lauretland.com> References: <4A0AC4CA.2060600@lauretland.com> Message-ID: <4A0DB9FB.80302@pu-pm.univ-fcomte.fr> Benjamin Lauret wrote: > Hi Guys, > > I tried to plug today a logitech spher AF into ekiga window 3.0.3 > Actually, I did two things. Just plugged cam and launch ekiga. It worked > fine. > Then I installed the Sw from logitech (and I guess the driver), then > launched ekiga. Now it just crash the computer. When the computer crashes, the OS (drivers included) if surely faulty! If ekiga only is faulty, it is killed by the OS and the computer continues to work as expected. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 15 18:55:40 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 15 May 2009 20:55:40 +0200 Subject: [Ekiga-list] Registration failed: 606 In-Reply-To: References: Message-ID: <4A0DBAAC.4020101@pu-pm.univ-fcomte.fr> Tim Pattinson wrote: > Hi, > > I've just registered for a new account at ekiga.net, and got a new username and password. But when I use these in the account druid in Ekiga, I just get the message "Registration failed: Registration failed" in the status bar, and "Registered accounts: 0" in the dialog. No other explanation what's wrong. > > If I capture the debug output, it contains the phrase "SIP/2.0 606 Not Acceptable", "CSeq: 1 REGISTER" right after it says "PDU received". What could be wrong? > > System is Mandriva linux 2008.1 with the standard "ekiga-2.0.12-1mdv2008.1" rpm from the repositories. It's a home network with a single router. > > Things I've tried: checking the name and password, I'm sure that's not the problem. And I read somewhere that funny characters (eg %, []) confuse the login process, so I made sure I don't have those in the username or password. > Things I've not tried: I'm still using v2 of ekiga, I assume that should still work even though v3 is still out. I tried to just take a newer ekiga rpm but it wanted to pull in several dependencies so I played safe. And I haven't tried altering the NAT/STUN configuration because I really don't understand what they are and can't find a simple explanation. I don't think my firewall settings are particularly severe, just the default router settings and normal security level in Mandriva. What should I look for? Send us the complete -d 4 output (see the wiki). Sometimes there is an error code (606), but afterwards it works or gives another meaningful error. -- Eugen From jbeard4 at cs.mcgill.ca Fri May 15 19:10:23 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Fri, 15 May 2009 15:10:23 -0400 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <8e648abd0905151115j331c911atc32065f1839f2c55@mail.gmail.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> <4A0DAED5.6010703@pu-pm.univ-fcomte.fr> <8e648abd0905151115j331c911atc32065f1839f2c55@mail.gmail.com> Message-ID: <8e648abd0905151210q1a285110v3f3e07269b09dca9@mail.gmail.com> Hi all, I can't seem to get the Windows build of Ekiga to produce console debugging output, but it now suddenly seems to be possible to make and receive calls to/from other SIP clients! Hopefully it will continue to work, and I won't need figure out how to debug it. Messaging, webcam and voice all work fine from Windows to Ubuntu. The only thing that doesn't work is presence (on the Windows version; Ubuntu version is 2, and doesn't seem to incorporate presence information), but I don't think this is a dealbreaker. I'm going to use this system for a few days to confirm that it is stable. If it is, I'll begin to recommend to my friends that they switch. Thanks for all of the advice, Jake On Fri, May 15, 2009 at 2:15 PM, Jacob Beard wrote: > Thank you, Eugen, that was extremely informative. I'll look into it > and see what I can figure out. > > Best regards, > > Jake > > On Fri, May 15, 2009 at 2:05 PM, Eugen Dedu > wrote: >> Jacob Beard wrote: >>> >>> Hi, >>> >>> I just installed the latest Ekiga on Windows XP. When installing, it >>> said that it was unable to automatically configure my network, and >>> directed me to the page instructing me to set up port forwarding. This >>> would be fine, except my Linksys WRT54G2 seems to be having some >>> trouble with port forwarding... maybe after I upgrade the firmware, >>> this will have changed. In the meantime, I tried to manually configure >>> STUN, but was unable to find the option in the place where it was >>> located on Ekiga 2.0, namely Protocols -> Network Settings. Is STUN >>> supported in the current Windows build? >> >> Hi, >> >> STUN option (boolean) was removed from the GUI in 3.0 (if I remember >> correctly) and was added back in 3.2. >> >> Still, in 3.0 you can check it on/off in gconf settings, >> .gconf/apps/ekiga/general/nat - disable_stun. ?I do not know in Windows >> where these gconf settings are stored. >> >> You can execute ekiga -d 4 | grep STUN to see if it is used (if it is used, >> you will see a line such as "STUN server replied Symmetric NAT (or other >> type of NAT)). ?See >> http://wiki.ekiga.org/index.php/Debugging_Ekiga#Debugging_Ekiga_on_Windows >> to see how to use -d 4 on Windows. >> >> The purpose of STUN is to allow private addresses (when your machine is >> behind a NAT, or a router allowing several computers to connect to Internet) >> to still use VoIP software (and others). ?So, with few exceptions, you need >> it, and it is on by default. >> >> -- >> Eugen >> > From jbeard4 at cs.mcgill.ca Fri May 15 19:22:20 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Fri, 15 May 2009 15:22:20 -0400 Subject: [Ekiga-list] How to control Ekiga via CLI on Windows? Message-ID: <8e648abd0905151222n216975e1ka998969afab89d18@mail.gmail.com> Hi all, I'm currently examining the feasibility of switching my grandparents from Skype to Ekiga. I think that learning a brand-new interface is going to be too hard for them, and so I'd like to make things very simple by just giving them a desktop icon that they can double-click in order to call me. In GNU/Linux, this is very simple, as I can just invoke ekiga from the command-line with the -c flag. On Windows version 3.02, though, it complains that an instance of Ekiga is already running, and ignores the flag. Is there a way to get the Ekiga Windows build to accept the command-line arguments? If not, is there another way to implement the effect I have described, where it is possible to create an icon that forces an already-running Ekiga instance to dial out to a particular SIP address? Please let me know. Thanks, Jake From ben at lauretland.com Fri May 15 19:58:43 2009 From: ben at lauretland.com (Benjamin Lauret) Date: Fri, 15 May 2009 21:58:43 +0200 Subject: [Ekiga-list] EKiga windows + Sphere AF. In-Reply-To: <4A0DB9FB.80302@pu-pm.univ-fcomte.fr> References: <4A0AC4CA.2060600@lauretland.com> <4A0DB9FB.80302@pu-pm.univ-fcomte.fr> Message-ID: <4A0DC973.9050506@lauretland.com> Hi Eugen, Yes for sure, it comes from the webcam driver. I was wondering if someone experiencing the same issue would have found a workaround. Anyway, there is something wrong in the driver, I think PTLIB does something none of the others apps I found does. Eventually, I would like to investigate on that. Is there a way to get a debug trace on windows? Rgds, Ben Eugen Dedu wrote: > Benjamin Lauret wrote: >> Hi Guys, >> >> I tried to plug today a logitech spher AF into ekiga window 3.0.3 >> Actually, I did two things. Just plugged cam and launch ekiga. It worked >> fine. >> Then I installed the Sw from logitech (and I guess the driver), then >> launched ekiga. Now it just crash the computer. > > When the computer crashes, the OS (drivers included) if surely faulty! > > If ekiga only is faulty, it is killed by the OS and the computer > continues to work as expected. > From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 15 20:01:45 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 15 May 2009 22:01:45 +0200 Subject: [Ekiga-list] EKiga windows + Sphere AF. In-Reply-To: <4A0DC973.9050506@lauretland.com> References: <4A0AC4CA.2060600@lauretland.com> <4A0DB9FB.80302@pu-pm.univ-fcomte.fr> <4A0DC973.9050506@lauretland.com> Message-ID: <4A0DCA29.80707@pu-pm.univ-fcomte.fr> Benjamin Lauret wrote: > Hi Eugen, > > Yes for sure, it comes from the webcam driver. I was wondering if > someone experiencing the same issue would have found a workaround. > Anyway, there is something wrong in the driver, I think PTLIB does > something none of the others apps I found does. Eventually, I would like > to investigate on that. Is there a way to get a debug trace on windows? Yes, it's shown in the wiki. > Eugen Dedu wrote: >> Benjamin Lauret wrote: >>> Hi Guys, >>> >>> I tried to plug today a logitech spher AF into ekiga window 3.0.3 >>> Actually, I did two things. Just plugged cam and launch ekiga. It worked >>> fine. >>> Then I installed the Sw from logitech (and I guess the driver), then >>> launched ekiga. Now it just crash the computer. >> When the computer crashes, the OS (drivers included) if surely faulty! >> >> If ekiga only is faulty, it is killed by the OS and the computer >> continues to work as expected. >> > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From sevmek at free.fr Fri May 15 20:46:57 2009 From: sevmek at free.fr (yannick) Date: Fri, 15 May 2009 22:46:57 +0200 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <8e648abd0905151210q1a285110v3f3e07269b09dca9@mail.gmail.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> <4A0DAED5.6010703@pu-pm.univ-fcomte.fr> <8e648abd0905151115j331c911atc32065f1839f2c55@mail.gmail.com> <8e648abd0905151210q1a285110v3f3e07269b09dca9@mail.gmail.com> Message-ID: <4A0DD4C1.7050501@free.fr> Jacob Beard a ?crit : > and voice all work fine from Windows to Ubuntu. The only thing that > doesn't work is presence (on the Windows version; Ubuntu version is 2, > and doesn't seem to incorporate presence information), but I don't > think this is a dealbreaker. > Version 2 do not provide presence information, thus you cannot get it. Version 9.04 of Ubuntu ship with Ekiga 3.2.0 (with presence support and better codecs for audio and video; using a 3.0.x you will notice better video if you use the theora codec) From otakuj462 at gmail.com Fri May 15 21:05:29 2009 From: otakuj462 at gmail.com (Jake B) Date: Fri, 15 May 2009 17:05:29 -0400 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <4A0DD4C1.7050501@free.fr> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> <4A0DAED5.6010703@pu-pm.univ-fcomte.fr> <8e648abd0905151115j331c911atc32065f1839f2c55@mail.gmail.com> <8e648abd0905151210q1a285110v3f3e07269b09dca9@mail.gmail.com> <4A0DD4C1.7050501@free.fr> Message-ID: <8e648abd0905151405y9e329b4iaa7aa81eff7d1a89@mail.gmail.com> Thanks, that explains that issue. I'm on Ubuntu 8.04 right now, and I'm keen to hold off from upgrading for a while yet, as everything is currently working extremely well. It may be worthwhile to spawn this question into a separate thread, but, has anyone had any success backporting Ekiga 3.2 to Ubuntu Hardy? I'm going to go ahead and try and compile the latest version myself. We'll see how that works :P Cheers, Jake On Fri, May 15, 2009 at 4:46 PM, yannick wrote: > Jacob Beard a ?crit : > >> and voice all work fine from Windows to Ubuntu. The only thing that >> doesn't work is presence (on the Windows version; Ubuntu version is 2, >> and doesn't seem to incorporate presence information), but I don't >> think this is a dealbreaker. >> > > Version 2 do not provide presence information, thus you cannot get it. > > Version 9.04 of Ubuntu ship with Ekiga 3.2.0 (with presence support and > better codecs for audio and video; using a 3.0.x you will notice better > video if you use the theora codec) > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From sevmek at free.fr Fri May 15 21:19:28 2009 From: sevmek at free.fr (yannick) Date: Fri, 15 May 2009 23:19:28 +0200 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <8e648abd0905151405y9e329b4iaa7aa81eff7d1a89@mail.gmail.com> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> <4A0DAED5.6010703@pu-pm.univ-fcomte.fr> <8e648abd0905151115j331c911atc32065f1839f2c55@mail.gmail.com> <8e648abd0905151210q1a285110v3f3e07269b09dca9@mail.gmail.com> <4A0DD4C1.7050501@free.fr> <8e648abd0905151405y9e329b4iaa7aa81eff7d1a89@mail.gmail.com> Message-ID: <4A0DDC60.2010304@free.fr> Jake B a ?crit : > I'm on Ubuntu 8.04 right now, and I'm keen to hold off from upgrading > for a while yet, as everything is currently working extremely well. It > may be worthwhile to spawn this question into a separate thread, but, > has anyone had any success backporting Ekiga 3.2 to Ubuntu Hardy? I'm bojo42 is working on that here: https://launchpad.net/~bojo42/+archive/ekiga But not ready yet, follow the progress here too: https://bugs.launchpad.net/ubuntu/+source/opal/+bug/316971 From otakuj462 at gmail.com Fri May 15 21:23:08 2009 From: otakuj462 at gmail.com (Jake B) Date: Fri, 15 May 2009 17:23:08 -0400 Subject: [Ekiga-list] STUN support on Windows XP In-Reply-To: <4A0DDC60.2010304@free.fr> References: <8e648abd0905141208k1fbfcafdmff3cbb433a13f952@mail.gmail.com> <4A0DAED5.6010703@pu-pm.univ-fcomte.fr> <8e648abd0905151115j331c911atc32065f1839f2c55@mail.gmail.com> <8e648abd0905151210q1a285110v3f3e07269b09dca9@mail.gmail.com> <4A0DD4C1.7050501@free.fr> <8e648abd0905151405y9e329b4iaa7aa81eff7d1a89@mail.gmail.com> <4A0DDC60.2010304@free.fr> Message-ID: <8e648abd0905151423m7ce3cf5bg654964f44d8eaeaa@mail.gmail.com> Thanks, I've actually following that bug report. I'll be very happy once a they have a Hardy version ready. Jake On Fri, May 15, 2009 at 5:19 PM, yannick wrote: > Jake B a ?crit : >> I'm on Ubuntu 8.04 right now, and I'm keen to hold off from upgrading >> for a while yet, as everything is currently working extremely well. It >> may be worthwhile to spawn this question into a separate thread, but, >> has anyone had any success backporting Ekiga 3.2 to Ubuntu Hardy? I'm > > bojo42 is working on that here: > https://launchpad.net/~bojo42/+archive/ekiga > But not ready yet, follow the progress here too: > https://bugs.launchpad.net/ubuntu/+source/opal/+bug/316971 > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From jbeard4 at cs.mcgill.ca Sat May 16 00:21:11 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Fri, 15 May 2009 20:21:11 -0400 Subject: [Ekiga-list] SIP client for Mac OS 10.3? Message-ID: <8e648abd0905151721u4cadd4b5lcdc9d43904fc32ce@mail.gmail.com> Hi, I'm wondering if anyone knows of a good SIP client for PowerPC Mac OS 10.3? Most of the client's listed on the interop page of Ekiga's wiki are for Mac OS 10.4 Please let me know. Thanks, Jake From djblake14 at aol.com Sat May 16 15:08:43 2009 From: djblake14 at aol.com (David Blake) Date: Sat, 16 May 2009 16:08:43 +0100 Subject: [Ekiga-list] Ekiga setup Message-ID: When I try the the setup on Ekiga running on Suse Enterprise I get the message at the subscription failed forbidden, but if I try the 500, 0r 502 options the system connects any suggestions David Blake djblake14 at aol.com From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat May 16 15:14:40 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 16 May 2009 17:14:40 +0200 Subject: [Ekiga-list] Ekiga setup In-Reply-To: References: Message-ID: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> David Blake wrote: > When I try the the setup on Ekiga running on Suse Enterprise I get the > message at the subscription failed forbidden, but if I try the 500, 0r > 502 options the system connects any suggestions Hi, - what version of ekiga do you use? - is it about ekiga.net account? If yes, what is shown in the Accounts window? - could you send us the -d 4 output (see wiki for how to do it)? -- Eugen From djblake14 at aol.com Sat May 16 15:30:12 2009 From: djblake14 at aol.com (David Blake) Date: Sat, 16 May 2009 16:30:12 +0100 Subject: [Ekiga-list] Ekiga setup In-Reply-To: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> References: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> Message-ID: <2748536F-B017-4F1E-AA20-8945261FBE3E@aol.com> I am some what of a Linux novice but if I run command as shown in Terminal I get no output that I can find the only thing that happens is ekiga starts On 16 May 2009, at 16:14, Eugen Dedu wrote: > David Blake wrote: >> When I try the the setup on Ekiga running on Suse Enterprise I get >> the message at the subscription failed forbidden, but if I try the >> 500, 0r 502 options the system connects any suggestions > > Hi, > > - what version of ekiga do you use? > > - is it about ekiga.net account? If yes, what is shown in the > Accounts window? > > - could you send us the -d 4 output (see wiki for how to do it)? > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list David Blake djblake14 at aol.com From djblake14 at aol.com Sat May 16 15:37:08 2009 From: djblake14 at aol.com (David Blake) Date: Sat, 16 May 2009 16:37:08 +0100 Subject: [Ekiga-list] Ekiga setup In-Reply-To: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> References: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> Message-ID: Ekiga version is 2.14.0 my account name and password have both worked on the ekiga site OK On 16 May 2009, at 16:14, Eugen Dedu wrote: > David Blake wrote: >> When I try the the setup on Ekiga running on Suse Enterprise I get >> the message at the subscription failed forbidden, but if I try the >> 500, 0r 502 options the system connects any suggestions > > Hi, > > - what version of ekiga do you use? > > - is it about ekiga.net account? If yes, what is shown in the > Accounts window? > > - could you send us the -d 4 output (see wiki for how to do it)? > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list David Blake djblake14 at aol.com From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat May 16 16:48:37 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 16 May 2009 18:48:37 +0200 Subject: [Ekiga-list] Ekiga setup In-Reply-To: <2748536F-B017-4F1E-AA20-8945261FBE3E@aol.com> References: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> <2748536F-B017-4F1E-AA20-8945261FBE3E@aol.com> Message-ID: <4A0EEE65.7000709@pu-pm.univ-fcomte.fr> Even if you have subscription failed, you say that the system connects, so everything is ok then... David Blake wrote: > I am some what of a Linux novice but if I run command as shown in > Terminal I get no output that I can find the only thing that happens is > ekiga starts > On 16 May 2009, at 16:14, Eugen Dedu wrote: > >> David Blake wrote: >>> When I try the the setup on Ekiga running on Suse Enterprise I get >>> the message at the subscription failed forbidden, but if I try the >>> 500, 0r 502 options the system connects any suggestions >> >> Hi, >> >> - what version of ekiga do you use? >> >> - is it about ekiga.net account? If yes, what is shown in the >> Accounts window? >> >> - could you send us the -d 4 output (see wiki for how to do it)? From volkerbradley at gmail.com Sat May 16 17:02:20 2009 From: volkerbradley at gmail.com (Volker Bradley) Date: Sat, 16 May 2009 13:02:20 -0400 Subject: [Ekiga-list] Questions regarding Ekiga function Message-ID: Hi, Am using Ekiga 3.2.0 on a T43p Lenovo Thinkpad with Kubuntu Jaunty. Just made a call to a cell phone using Ekiga Call Out which uses my diamondcard.us account. I noticed that both the other party and I had to be careful to wait until the other person stopped talking or else some of the conversation was cut off. The result was a somewhat strained conversation. Is that the normal behavior for Ekiga? Can this be corrected by using a different codec? Any other suggestions? Thanks. Volker -------------- next part -------------- An HTML attachment was scrubbed... URL: From djblake14 at aol.com Sat May 16 18:05:50 2009 From: djblake14 at aol.com (David Blake) Date: Sat, 16 May 2009 19:05:50 +0100 Subject: [Ekiga-list] Ekiga setup In-Reply-To: <4A0EEE65.7000709@pu-pm.univ-fcomte.fr> References: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> <2748536F-B017-4F1E-AA20-8945261FBE3E@aol.com> <4A0EEE65.7000709@pu-pm.univ-fcomte.fr> Message-ID: <1242497150.4479.1.camel@linux-yiso.dbhome24> But it says I have no registered accounts On Sat, 2009-05-16 at 18:48 +0200, Eugen Dedu wrote: > Even if you have subscription failed, you say that the system connects, > so everything is ok then... > > David Blake wrote: > > I am some what of a Linux novice but if I run command as shown in > > Terminal I get no output that I can find the only thing that happens is > > ekiga starts > > On 16 May 2009, at 16:14, Eugen Dedu wrote: > > > >> David Blake wrote: > >>> When I try the the setup on Ekiga running on Suse Enterprise I get > >>> the message at the subscription failed forbidden, but if I try the > >>> 500, 0r 502 options the system connects any suggestions > >> > >> Hi, > >> > >> - what version of ekiga do you use? > >> > >> - is it about ekiga.net account? If yes, what is shown in the > >> Accounts window? > >> > >> - could you send us the -d 4 output (see wiki for how to do it)? > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From djblake14 at aol.com Sat May 16 18:09:37 2009 From: djblake14 at aol.com (David Blake) Date: Sat, 16 May 2009 19:09:37 +0100 Subject: [Ekiga-list] Ekiga setup In-Reply-To: <4A0EEE65.7000709@pu-pm.univ-fcomte.fr> References: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> <2748536F-B017-4F1E-AA20-8945261FBE3E@aol.com> <4A0EEE65.7000709@pu-pm.univ-fcomte.fr> Message-ID: <1242497377.4880.1.camel@linux-yiso.dbhome24> I have just checked again and if you go into the accounts tab the default account says registration failed On Sat, 2009-05-16 at 18:48 +0200, Eugen Dedu wrote: > Even if you have subscription failed, you say that the system connects, > so everything is ok then... > > David Blake wrote: > > I am some what of a Linux novice but if I run command as shown in > > Terminal I get no output that I can find the only thing that happens is > > ekiga starts > > On 16 May 2009, at 16:14, Eugen Dedu wrote: > > > >> David Blake wrote: > >>> When I try the the setup on Ekiga running on Suse Enterprise I get > >>> the message at the subscription failed forbidden, but if I try the > >>> 500, 0r 502 options the system connects any suggestions > >> > >> Hi, > >> > >> - what version of ekiga do you use? > >> > >> - is it about ekiga.net account? If yes, what is shown in the > >> Accounts window? > >> > >> - could you send us the -d 4 output (see wiki for how to do it)? > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From devel at tootai.net Sat May 16 19:59:11 2009 From: devel at tootai.net (Daniel Huhardeaux) Date: Sat, 16 May 2009 21:59:11 +0200 Subject: [Ekiga-list] Ekiga website In-Reply-To: <8e648abd0905141421x4472d73dybd8134db51d3eedc@mail.gmail.com> References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> <8e648abd0905141421x4472d73dybd8134db51d3eedc@mail.gmail.com> Message-ID: <4A0F1B0F.3090202@tootai.net> Jake B a ?crit : > On Thu, May 14, 2009 at 4:33 PM, Jo-Erlend Schinstad > wrote: > > >> I really don't understand why anyone would want to submit to Skype, >> > > Skype makes NAT traversal really, really easy, so much that it's a > non-issue. I feel like this may be an area where Ekiga is lacking. > Please see my other post about trying to get Ekiga to work behind a > double-NAT where port forwarding is impossible, for more details in > this regard. Just my .02 > Knowing how Skype is working and being network administrator, Skype is banned (I'm not alone and more and more administrations, at least in Europe, do the same). Sorry. but if you have to use port 80 to go out for VoIP I can't accept this. I can't also accept the fact that I have to share my xDSL|fiber line with my neighbours. If I share *I* decide what and with who. -- Daniel From malik_jemes at hotmail.com Sat May 16 19:59:39 2009 From: malik_jemes at hotmail.com (malik_jemes at hotmail.com) Date: Sat, 16 May 2009 12:59:39 -0700 Subject: [Ekiga-list] Vacation reply In-Reply-To: Message-ID: An HTML attachment was scrubbed... URL: From castromd at tcd.ie Sat May 16 21:13:07 2009 From: castromd at tcd.ie (Daniel Castro) Date: Sat, 16 May 2009 22:13:07 +0100 Subject: [Ekiga-list] Dialing rules? In-Reply-To: References: Message-ID: Anyone? 2009/5/15 Daniel Castro > Hello, > > I'm using ekiga 3.2.0 > > On my Address Book I have configured my LDAP and I can search and find > people. > My problem is that what LDAP returns as telephoneNumber is different from > what I need to use as the sip uri. > > To make it more clear, my LDAP search returns: > telephoneNumber: +111 22 33 4444 > > But my call manager is only expecting 4444 as the sip uri. > > Is there a way to apply dialing rules? Or how can I workaround this? > > Thanks! > > -- > ________________________ > > Daniel Castro, M.Sc. > +353 083-318-2058 > dancasmo at gmail.com > castromd at tcd.ie > ________________________ > -- ________________________ Daniel Castro, M.Sc. +353 083-318-2058 dancasmo at gmail.com castromd at tcd.ie ________________________ -------------- next part -------------- An HTML attachment was scrubbed... URL: From john_re at fastmail.us Sun May 17 08:21:30 2009 From: john_re at fastmail.us (john_re) Date: Sun, 17 May 2009 01:21:30 -0700 Subject: [Ekiga-list] TODAY May 17 Sunday Asterisk VOIP Conference server & Ekiga for BerkeleyTIP Message-ID: <1242548490.28039.1315842787@webmail.messagingengine.com> As usual, the BerkeleyTIP group programming project is to learn about & work toward implementing our own Asterisk VOIP conference server, during our meeting. 10A-6P Pacific USA (-8H GMT) = 1P-9P Eastern US = 6P-2AM GMT. http://sites.google.com/site/berkeleytip/ Join the VOIP online conference & help out, or chat with your buddies. :) http://sites.google.com/site/berkeleytip/remote-attendance #berekeleytip on freenode.irc.net Join the mailing list. http://groups.google.com/group/BerkTIPGlobal == This message is mainly for sending to the Ekiga & Asterisk mailing lists. From john_re at fastmail.us Sun May 17 08:26:55 2009 From: john_re at fastmail.us (john_re) Date: Sun, 17 May 2009 01:26:55 -0700 Subject: [Ekiga-list] Correction IRC Channel name - was TODAY May 17 Sunday Asterisk VOIP Conference server & Ekiga for BerkeleyTIP Message-ID: <1242548815.29099.1315843269@webmail.messagingengine.com> http://sites.google.com/site/berkeleytip/ Join the VOIP online conference & help out, or chat with your buddies. :) http://sites.google.com/site/berkeleytip/remote-attendance er, correct spelling: Freenode channel #BerkeleyTIP, irc.freenode.net NOT -> #berekeleytip on freenode.irc.net From dotancohen at gmail.com Sun May 17 08:44:54 2009 From: dotancohen at gmail.com (Dotan Cohen) Date: Sun, 17 May 2009 11:44:54 +0300 Subject: [Ekiga-list] Ekiga website In-Reply-To: References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> Message-ID: <880dece00905170144r746671e1r969a8805e3d8ecec@mail.gmail.com> > I just wanted to comment on the fact that unlike Skype, Ekiga uses real > VoIP protocols. Skype, on the other hand, uses a proprietary protocol > that forces everyone to use Skype. If you use Ekiga, then your friends > doesn't necessarily need to use Ekiga. They can use any real VoIP > client capable of SIP or H.323, be it a softphone or a physical phone, like > ones from Cisco. > > I really don't understand why anyone would want to submit to Skype, seeing > how they're more expensive than their competitors in many countries, and > cannot even provide connections to the "real" telephony networks in many > countries. Not to mention the fact that they use force to keep their > customers from choosing other service providers. > > In my experience, once people are made aware of these issues, they're not > so hesitant about switching to real internet telephony services which are free > and also gives you the freedom of choice. > The problem is that people just don't care. Skype is easy to set up, works well, and is reasonable affordable. Add to that a large userbase and that is all the reason people need. You may be part of a thinking elite, but do not assume that people use Skype because of reason. They use it because it is easy to use and their friends already use it. That said, please do not hijack this thread into an anti-Skype thread. I would like to help resolve the issues mentioned so that we can help people move to Ekiga from Skype. You are preaching to the choir here, and cluttering the thread. -- Dotan Cohen http://what-is-what.com http://gibberish.co.il From simos.lists at googlemail.com Sun May 17 10:08:30 2009 From: simos.lists at googlemail.com (Simos Xenitellis) Date: Sun, 17 May 2009 11:08:30 +0100 Subject: [Ekiga-list] Ekiga website In-Reply-To: <880dece00905170144r746671e1r969a8805e3d8ecec@mail.gmail.com> References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> <880dece00905170144r746671e1r969a8805e3d8ecec@mail.gmail.com> Message-ID: <598e9210905170308u9419844pc9a3c27de767d655@mail.gmail.com> On Sun, May 17, 2009 at 9:44 AM, Dotan Cohen wrote: >> I just wanted to comment on the fact that unlike Skype, ?Ekiga uses real >> VoIP protocols. Skype, on the other hand, uses a proprietary protocol >> that forces everyone to use Skype. If you use Ekiga, then your friends >> doesn't necessarily need to use Ekiga. They can use any real VoIP >> client capable of SIP or H.323, be it a softphone or a physical phone, like >> ones from Cisco. >> >> I really don't understand why anyone would want to submit to Skype, seeing >> how they're more expensive than their competitors in many countries, and >> cannot even provide connections to the "real" telephony networks in many >> countries. Not to mention the fact that they use force to keep their >> customers from choosing other service providers. >> >> In my experience, once people are made aware of these issues, they're not >> so hesitant about switching to real internet telephony services which are free >> and also gives you the freedom of choice. >> > > The problem is that people just don't care. Skype is easy to set up, > works well, and is reasonable affordable. Add to that a large userbase > and that is all the reason people need. You may be part of a thinking > elite, but do not assume that people use Skype because of reason. They > use it because it is easy to use and their friends already use it. > > That said, please do not hijack this thread into an anti-Skype thread. > I would like to help resolve the issues mentioned so that we can help > people move to Ekiga from Skype. You are preaching to the choir here, > and cluttering the thread. As far as I understand, Damien Sandras, who has access to the website, etc has limited Internet connectivity at this time. Is there someone else who has access and can help make these usability fixes happen? Simos From michel.memeteau at gmail.com Sun May 17 13:20:39 2009 From: michel.memeteau at gmail.com (michel memeteau) Date: Sun, 17 May 2009 15:20:39 +0200 Subject: [Ekiga-list] Ekiga website In-Reply-To: References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> Message-ID: Dotan , your remarks are really appreciated and shared IMO. Ekiga website is still too scary for the basic tardeted audience, a few minor changes can make it even easier than Skype/MSN/otherShit. But : On Thu, May 14, 2009 at 10:33 PM, Jo-Erlend Schinstad < joerlend.schinstad at gmail.com> wrote: > > I really don't understand why anyone would want to submit to Skype, seeing > how they're more expensive than their competitors in many countries, and > cannot even provide connections to the "real" telephony networks in many > countries. Not to mention the fact that they use force to keep their > customers from choosing other service providers. > It's really simple : >From skype website , you're just 3 clicks away from VideoCalling your friend , whatever his x86 OS is ( almost ). 90% skype users ( 14 Millions ) don't even use the callout service. they just want to call their friends on their computer and use the webcam. Webcam is a killer app , we all know this. > > In my experience, once people are made aware of these issues, they're not > so hesitant about switching to real internet telephony services which are > free > and also gives you the freedom of choice. > I hate skype and the system behind it but what you say is not true. Usually , the tehnics and ethics behind a software does not influence people choice. as long as the software does not cost money , is easy and work well without any stupid ads or malware, they will use it forever. Look how ubuntu users wanted ekiga to be removed from defailt ubuntu and be replaced with some skype shit. that shows how even freeOS users don't care... so Windows users... To carry on your thoughts I guess : - User agent detection to launch the right download as most Websites would be great. ( at least for windows and mac ( Xmeeting ? ) ) - Static Build for Linux would be great, it's just too complicated to support the 100 distros. ( I tried to generate a static but failed ..) -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0974763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at ippi.fr jabber/GTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Sun May 17 13:43:25 2009 From: michel.memeteau at gmail.com (michel memeteau) Date: Sun, 17 May 2009 15:43:25 +0200 Subject: [Ekiga-list] SIP client for Mac OS 10.3? In-Reply-To: <8e648abd0905151721u4cadd4b5lcdc9d43904fc32ce@mail.gmail.com> References: <8e648abd0905151721u4cadd4b5lcdc9d43904fc32ce@mail.gmail.com> Message-ID: I guess you've tested Xmeeting and Xlite ? I know that's a bug issue with apple , you have to pay to upgrade. On Sat, May 16, 2009 at 2:21 AM, Jacob Beard wrote: > Hi, > > I'm wondering if anyone knows of a good SIP client for PowerPC Mac OS > 10.3? Most of the client's listed on the interop page of Ekiga's wiki > are for Mac OS 10.4 > > Please let me know. Thanks, > > Jake > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0974763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at ippi.fr jabber/GTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Sun May 17 18:33:28 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sun, 17 May 2009 20:33:28 +0200 Subject: [Ekiga-list] Ekiga website In-Reply-To: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> References: <880dece00905140655n545b3a47p69418fb1e806384f@mail.gmail.com> Message-ID: <4A105878.40209@pu-pm.univ-fcomte.fr> Hi, Dotan Cohen wrote: [...] > 1) If the user looks for "ekiga" via google, then the url is > gnomemeeting.org for some reason. What is that? (Yes, _I_ know, but > should I have to explain that to potential users?). If the user types > in ekiga.com then she arrives at ekiga.net. Redirect? That scares > Windows users, who suspect malware and trickery. In my Windows days, I > would have left right here. I propose to empty this web site, i.e. remove the redirection, so that this website is empty, so that it disappears from google. gnomemeeting is already old. > 2) "Downloads: Choose your distribution below and start downloading." > What is a distribution? How do I download this? Where is the big green > "download here" animated GIF? > > 3) If the user happens to find the Windows link (and even knows that > is what she needs) then she gets a page with no files to download! She > will _not_ open the README file to find what she needs! > > 4) If the user actually did find and open the README file under > Windows downloads, the file contains this single line of text (no > hyperlink): > Please download from : http://snapshots.ekiga.net/snapshots/win32/archives/ > > 5) If the user actually follows the hyperlink then she goes to an > Apache directory listing. This is what she sees: > [ ] ekiga-setup-3.0.1beta-7144.exe 02-Oct-2008 23:08 18M > [ ] ekiga-setup-3.0.1beta-7144d.exe 02-Oct-2008 23:05 61M > [ ] ekiga-setup-3.0.1beta-7205.exe 14-Oct-2008 20:31 18M > [ ] ekiga-setup-3.0.1beta-7205d.exe 14-Oct-2008 20:31 61M > [ ] ekiga-setup-3.0.2beta-7300.exe 30-Oct-2008 21:33 22M > [ ] ekiga-setup-3.0.2beta-7300d.exe 30-Oct-2008 21:30 65M > [ ] ekiga-setup-3.0.2beta-7316.exe 02-Nov-2008 09:49 22M > [ ] ekiga-setup-3.0.2beta-7316d.exe 02-Nov-2008 09:59 65M > > Which one should she click on? How much further do you think she is > going to get? I agree with you. The problem is that we are still in the middle of transition having started long ago. www.ekiga.org is more beautiful and only one person can change it (so secure), but nearly all the pages are obsolete, while wiki.ekiga.org has practically all the information (and is community-based). Someone proposed to change mediawiki in drupal (in the wiki site) and integrate www.ekiga.org web site too. That would finish the transition and all the problems. Of course, you are free to comment on the wiki web site too :o) Eugen From dotancohen at gmail.com Mon May 18 09:18:20 2009 From: dotancohen at gmail.com (Dotan Cohen) Date: Mon, 18 May 2009 12:18:20 +0300 Subject: [Ekiga-list] New users signup: enable from within Ekiga Message-ID: <880dece00905180218r3d07eb2eo18b401043468875@mail.gmail.com> Currently, new Ekiga users must sign up for the service from the Ekiga website. As simple as that may be to you and me, my first attempt at watching a new user try to use Ekiga failed today because she was confused by the signup process. In my opinion, allowing the user to sign up from within the application itself is important. -- Dotan Cohen http://what-is-what.com http://gibberish.co.il From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 18 09:52:27 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 18 May 2009 11:52:27 +0200 Subject: [Ekiga-list] New users signup: enable from within Ekiga In-Reply-To: <880dece00905180218r3d07eb2eo18b401043468875@mail.gmail.com> References: <880dece00905180218r3d07eb2eo18b401043468875@mail.gmail.com> Message-ID: <4A112FDB.7000909@pu-pm.univ-fcomte.fr> Dotan Cohen wrote: > Currently, new Ekiga users must sign up for the service from the Ekiga > website. As simple as that may be to you and me, my first attempt at > watching a new user try to use Ekiga failed today because she was > confused by the signup process. In my opinion, allowing the user to > sign up from within the application itself is important. Right, it's a known bug (on http://wiki.ekiga.org/index.php/ToDo). Could you create a bug report please? -- Eugen From dotancohen at gmail.com Mon May 18 10:14:25 2009 From: dotancohen at gmail.com (Dotan Cohen) Date: Mon, 18 May 2009 13:14:25 +0300 Subject: [Ekiga-list] New users signup: enable from within Ekiga In-Reply-To: <4A112FDB.7000909@pu-pm.univ-fcomte.fr> References: <880dece00905180218r3d07eb2eo18b401043468875@mail.gmail.com> <4A112FDB.7000909@pu-pm.univ-fcomte.fr> Message-ID: <880dece00905180314h3b5b1a2epc677224124cfbd6e@mail.gmail.com> > Right, it's a known bug (on http://wiki.ekiga.org/index.php/ToDo). Could you > create a bug report please? > http://bugzilla.gnome.org/show_bug.cgi?id=583032 -- Dotan Cohen http://what-is-what.com http://gibberish.co.il From christian.bourke1 at gmail.com Tue May 19 06:32:35 2009 From: christian.bourke1 at gmail.com (Bilbo) Date: Mon, 18 May 2009 23:32:35 -0700 (PDT) Subject: [Ekiga-list] H323_H263 video codec Message-ID: <23610492.post@talk.nabble.com> Hi, I would like to use Ekiga to receive H323 video calls using the H263 video codec. My understanding is that is only supports H.261. Does anyone know if Ekiga is compatible with the h323_h263 video codec? I read a post about a user attempting to compile Ekiga with h323_h263 codec. Has anyone done this before of know if its possible? Thanks, -- View this message in context: http://www.nabble.com/H323_H263-video-codec-tp23610492p23610492.html Sent from the Ekiga General mailing list archive at Nabble.com. From dsandras at seconix.com Mon May 18 18:43:04 2009 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 18 May 2009 20:43:04 +0200 Subject: [Ekiga-list] Questions regarding Ekiga function In-Reply-To: References: Message-ID: <1242672184.2332.55.camel@scorpion.multitel.be> Hi, Le samedi 16 mai 2009 ? 13:02 -0400, Volker Bradley a ?crit : > Hi, > Am using Ekiga 3.2.0 on a T43p Lenovo Thinkpad with Kubuntu Jaunty. > Just made a call to a cell phone using Ekiga Call Out which uses my > diamondcard.us account. > I noticed that both the other party and I had to be careful to wait > until the other person stopped talking or else some of the > conversation was cut off. > The result was a somewhat strained conversation. > Is that the normal behavior for Ekiga? Can this be corrected by using > a different codec? Any other suggestions? That's not a normal behavior. You could indeed check what codec is used, and use a codec using less bandwidth like GSM. Also make sure there is no video transmitted at all. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon May 18 18:43:38 2009 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 18 May 2009 20:43:38 +0200 Subject: [Ekiga-list] Ekiga setup In-Reply-To: References: <4A0ED860.4080305@pu-pm.univ-fcomte.fr> Message-ID: <1242672218.2332.56.camel@scorpion.multitel.be> Le samedi 16 mai 2009 ? 16:37 +0100, David Blake a ?crit : > Ekiga version is 2.14.0 > my account name and password have both worked on the ekiga site OK You should examine the output of ekiga -d 4. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon May 18 18:45:40 2009 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 18 May 2009 20:45:40 +0200 Subject: [Ekiga-list] How to control Ekiga via CLI on Windows? In-Reply-To: <8e648abd0905151222n216975e1ka998969afab89d18@mail.gmail.com> References: <8e648abd0905151222n216975e1ka998969afab89d18@mail.gmail.com> Message-ID: <1242672340.2332.58.camel@scorpion.multitel.be> Hi, Le vendredi 15 mai 2009 ? 15:22 -0400, Jacob Beard a ?crit : > Hi all, > > I'm currently examining the feasibility of switching my grandparents > from Skype to Ekiga. I think that learning a brand-new interface is > going to be too hard for them, and so I'd like to make things very > simple by just giving them a desktop icon that they can double-click > in order to call me. In GNU/Linux, this is very simple, as I can just > invoke ekiga from the command-line with the -c flag. On Windows > version 3.02, though, it complains that an instance of Ekiga is > already running, and ignores the flag. Is there a way to get the Ekiga > Windows build to accept the command-line arguments? If not, is there > another way to implement the effect I have described, where it is > possible to create an icon that forces an already-running Ekiga > instance to dial out to a particular SIP address? > Unfortunately I see no way. Nobody implemented that mechanism for WIN32. It is not very difficult to do. I remember that XMMS in the old days was using a socket mechanism to check that an instance was running and if it was the case, it was simply sending a command over the socket interface. Ekiga can not do that (yet). But Michael Rickmann is doing a lot of work on the win32 build nowadays. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon May 18 18:46:07 2009 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 18 May 2009 20:46:07 +0200 Subject: [Ekiga-list] Dialing rules? In-Reply-To: References: Message-ID: <1242672367.2332.59.camel@scorpion.multitel.be> Hi, It is on the TODO. Somebody was working on it, but I think he gave up due to my lack of responsiveness. Le samedi 16 mai 2009 ? 22:13 +0100, Daniel Castro a ?crit : > Anyone? > > 2009/5/15 Daniel Castro > Hello, > > I'm using ekiga 3.2.0 > > On my Address Book I have configured my LDAP and I can search > and find people. > My problem is that what LDAP returns as telephoneNumber is > different from what I need to use as the sip uri. > > To make it more clear, my LDAP search returns: > telephoneNumber: +111 22 33 4444 > > But my call manager is only expecting 4444 as the sip uri. > > Is there a way to apply dialing rules? Or how can I workaround > this? > > Thanks! > > -- > ________________________ > > Daniel Castro, M.Sc. > +353 083-318-2058 > dancasmo at gmail.com > castromd at tcd.ie > ________________________ > > > > -- > ________________________ > > Daniel Castro, M.Sc. > +353 083-318-2058 > dancasmo at gmail.com > castromd at tcd.ie > ________________________ > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jbeard4 at cs.mcgill.ca Tue May 19 13:30:45 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Tue, 19 May 2009 09:30:45 -0400 Subject: [Ekiga-list] How to control Ekiga via CLI on Windows? In-Reply-To: <1242672340.2332.58.camel@scorpion.multitel.be> References: <8e648abd0905151222n216975e1ka998969afab89d18@mail.gmail.com> <1242672340.2332.58.camel@scorpion.multitel.be> Message-ID: <8e648abd0905190630j12293c9bubf967004c443e6ae@mail.gmail.com> I'll submit it as a feature request. Thanks, Jake On Mon, May 18, 2009 at 2:45 PM, Damien Sandras wrote: > Hi, > > Le vendredi 15 mai 2009 ? 15:22 -0400, Jacob Beard a ?crit : >> Hi all, >> >> I'm currently examining the feasibility of switching my grandparents >> from Skype to Ekiga. I think that learning a brand-new interface is >> going to be too hard for them, and so I'd like to make things very >> simple by just giving them a desktop icon that they can double-click >> in order to call me. In GNU/Linux, this is very simple, as I can just >> invoke ekiga from the command-line with the -c flag. On Windows >> version 3.02, though, it complains that an instance of Ekiga is >> already running, and ignores the flag. Is there a way to get the Ekiga >> Windows build to accept the command-line arguments? If not, is there >> another way to implement the effect I have described, where it is >> possible to create an icon that forces an already-running Ekiga >> instance to dial out to a particular SIP address? >> > > Unfortunately I see no way. > > Nobody implemented that mechanism for WIN32. It is not very difficult to > do. I remember that XMMS in the old days was using a socket mechanism to > check that an instance was running and if it was the case, it was simply > sending a command over the socket interface. > > Ekiga can not do that (yet). But Michael Rickmann is doing a lot of work > on the win32 build nowadays. > -- > ?_ ? ? Damien Sandras > (o- > //\ ? ?Ekiga Softphone : http://www.ekiga.org/ > v_/_ ? Be IP ? ? ? ? ? : http://www.beip.be/ > ? ? ? FOSDEM ? ? ? ? ?: http://www.fosdem.org/ > ? ? ? SIP Phone ? ? ? : sip:dsandras at ekiga.net > > > From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue May 19 14:32:14 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 19 May 2009 16:32:14 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.1 [STABLE] available Message-ID: <4A12C2EE.2020906@pu-pm.univ-fcomte.fr> This is the first stable release of the 3.2 release series of Ekiga. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free audio and video calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2 (take 3.2.1) Required librairies can be found at: ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/ (take 3.6.2) ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ (take 2.6.2) * What's changed ? ================== - Fixed various crashes on shutdown - Fixed crash when opening preferences or assistant - Fixed crash when no account - Fixed SIP registration - Fixed DTMF mode for SIP endpoint - Migrate ekiga.net configuration from 3.0 to 3.2 - Maintain window position on hiding/showing the main window - On some failed registration, do not show the unuseful RequestTerminated code, but the actual error - In assistant, fill user name field, if empty, with user name - In preferences, audio/video devices, remove unused FFMPEG and WAVFile modules - Fixed recognition of cameras with non-ascii characters - Fixed compilation with --disable-tracing - Various fixes during configuration - Fixed issue with having multiple registrations with the same SIP registrar - Fixed problem with not waiting till ACK arrives, some implementations get offended if the ACK gets a transaction does not exist error. Thanks hongsion for the report - Fixed bug where if a non-INVITE transaction gets a 1xx response, but then the 2xx (or above) response is lost, the command is not retransmitted - Added fix for video plug in shared library loading, current code would not look anywhere but default path - Fixed compiling G722 plug in on SUN - Fixed correct value for remote party address - Fixed compilation on NetBSD - Fixed INVITE sent in response to a REFER command using a different local user name to the original call - Fixed bug where opal tries to install plugins even if they have been disabled - Fixed crash in PStandardColourConverter::YUY2toYUV420PWithResize - Fixed include path overrides package include path - Fixed search for connection matching replaces header dialog info, broken during changes to make calls back into the same stack - Fixed from/to fields reversed in call dialog identifier information, needed for a INVITE with replaces header - Fixed thread leaks - Fixed video I-frame detection - Fixed media format matching option additions - Fixed advanced rate controller support - Fixed popping frames problem when rate controller skips input frames - Fixed missing re-lock of mutex on jitter buffer shut down - Fixed gatekeeper discovery - Added YUV2 support to DirectX code - Fixed crash in PInterfaceMonitor::Stop - If SIP answer to our offer contains only media formats we never offered then abort the call as this is SO not to specification! - Fixed possible assertion if the soundcard blocks and prevents the device to be closed - Fixed possible path through unsubscribe/unregister code that could lead to a NULL pointer being used - Fixed issue in SIP registering, if both a full AOR and a registrar host name is provided then we would normally disable all registrar searches (e.g. SRV record lookup) and just use the host name specified - Change default TSTO in H.263 to give better quality - Fixed issue with SIP call hairpinning back into the same stack - Fixed possibility of closing a channel twice - Fixed intermittent problem with losing an audio channel when using INVITE with a replace header - Fixed being able to switch off jitter buffer while still a thread reading from it - Fixed bug with "hairpin" SIP calls, subsequent commands to INVITE are not routed to the correct connection instance - H.224 should not be enabled when H.323 is disabled - Various Solaris build fixes - Fixed RFC3890 support - Don't stop a call from clearing due to lack of media just because a session has not received any packets - Fixed memory leaks in the plugins code - Improved the RTP stack performances - Fixed various video payload problems - Fixed issue with outgoing re-INVITE that gets a 401/407 authentication required error, the re-transmitted INVITE was not a re-INVITE but another normal INVITE, so "hold" doesn't work - Fixed issue with incoming re-INVITE that has no SDp in the INVITE, if the eventual ACK has the same streams but only changed the IP address/port for RTP, then we did not change our RTP send addresss/port - Add numerous boundary checks to H.263 codec - Discard out of order packets, mode A frames that don't begin with a start code, and frames that don't begin with a start code in H.263 codec - Fixed initial H.323 call set up honouring the auto-start configuration for "don't offer" - Fixes for gcc 4.4.0 - Fixed compilation with video, h.323 or sip disabled - Windows port: - DirectX fixes - Better LDAP support - Add back devices - Fixed issue with empty strings for Windows sound devices being returned when being used over a Remote Desktop connection - Fixed G.722 compilation - Fixed linker problems - Other minor fixes - Updates translations: ar, as, crh, es, kn, nb, or, zh_CN - Updated help translation: el, es Special thanks to Julien Puydt, Michael Rickmann, Mounir Lamouri, Eugen Dedu, Jan Schampera and Yannick Defais for their continuous work on Ekiga. On behalf of Ekiga team, Eugen Dedu From volkerbradley at gmail.com Tue May 19 18:30:00 2009 From: volkerbradley at gmail.com (Volker Bradley) Date: Tue, 19 May 2009 14:30:00 -0400 Subject: [Ekiga-list] Questions regarding Ekiga function In-Reply-To: <1242672184.2332.55.camel@scorpion.multitel.be> References: <1242672184.2332.55.camel@scorpion.multitel.be> Message-ID: Thank you very much for your response. Volker On Mon, May 18, 2009 at 2:43 PM, Damien Sandras wrote: > Hi, > > Le samedi 16 mai 2009 ? 13:02 -0400, Volker Bradley a ?crit : > > Hi, > > Am using Ekiga 3.2.0 on a T43p Lenovo Thinkpad with Kubuntu Jaunty. > > Just made a call to a cell phone using Ekiga Call Out which uses my > > diamondcard.us account. > > I noticed that both the other party and I had to be careful to wait > > until the other person stopped talking or else some of the > > conversation was cut off. > > The result was a somewhat strained conversation. > > Is that the normal behavior for Ekiga? Can this be corrected by using > > a different codec? Any other suggestions? > > That's not a normal behavior. You could indeed check what codec is used, > and use a codec using less bandwidth like GSM. Also make sure there is > no video transmitted at all. > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ Be IP : > http://www.beip.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Tue May 19 19:24:27 2009 From: sevmek at free.fr (yannick) Date: Tue, 19 May 2009 21:24:27 +0200 Subject: [Ekiga-list] [Ekiga-devel-list] ANNOUNCE - Ekiga 3.2.1 [STABLE] available In-Reply-To: <4A12C2EE.2020906@pu-pm.univ-fcomte.fr> References: <4A12C2EE.2020906@pu-pm.univ-fcomte.fr> Message-ID: <4A13076B.1090500@free.fr> Eugen Dedu a ?crit : > This is the first stable release of the 3.2 release series of Ekiga. > We already have packages for slackware here: http://wiki.ekiga.org/index.php/Download_Ekiga#Slackware From dsandras at seconix.com Wed May 20 07:52:17 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 20 May 2009 09:52:17 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.2 [STABLE] available Message-ID: <1242805937.23556.21.camel@scorpion.multitel.be> This is the second stable release of the 3.2 release series of Ekiga. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free audio and video calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2 (take 3.2.2) Required librairies can be found at: ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/ (take 3.6.2) ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ (take 2.6.2) * What's changed ? ================== - Fixed various crashes on incoming calls. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed May 20 08:33:24 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 20 May 2009 10:33:24 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.3 [STABLE] available Message-ID: <1242808404.23556.25.camel@scorpion.multitel.be> This is the third stable release of the 3.2 release series of Ekiga. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free audio and video calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2 (take 3.2.3) Required librairies can be found at: ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/ (take 3.6.2) ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ (take 2.6.2) * What's changed ? ================== - It contains a fix for invalid uris displayed in the main GUI. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed May 20 08:35:16 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 20 May 2009 10:35:16 +0200 Subject: [Ekiga-list] [Ekiga-devel-list] ANNOUNCE - Ekiga 3.2.2 [STABLE] available In-Reply-To: <5256d0b0905200125g6af53c7r4d90baf3d8427994@mail.gmail.com> References: <1242805937.23556.21.camel@scorpion.multitel.be> <5256d0b0905200125g6af53c7r4d90baf3d8427994@mail.gmail.com> Message-ID: <1242808516.23556.27.camel@scorpion.multitel.be> Le mercredi 20 mai 2009 ? 09:25 +0100, Peter Robinson a ?crit : > Hi, > > > * What is it ? > > ============== > > > > Ekiga is a free Voice over IP softphone allowing you to do free audio > > and video calls over the Internet. > > > > Ekiga is the first Open Source application to support both H.323 and > > SIP, as well as audio and video. Ekiga was formerly known as > > GnomeMeeting. > > > > More information can be found at http://www.ekiga.org > > > > > > * Where to get it ? > > =================== > > > > Ekiga is available at: > > ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2 (take 3.2.2) > > > > Required librairies can be found at: > > ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/ (take 3.6.2) > > ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ (take 2.6.2) > > Apparently this wants ptlib 2.6.3 and presumably opal 3.6.3, details > below. Is this a mistake in the configure check or the release notes? > > Peter > > checking for AVAHI... yes > checking for scrollkeeper-config... /usr/bin/scrollkeeper-config > checking for PTLIB... configure: error: Package requirements (ptlib >= > 2.6.3) were not met: > > Requested 'ptlib >= 2.6.3' but version of ptlib is 2.6.2 > > Consider adjusting the PKG_CONFIG_PATH environment variable if you > installed software in a non-standard prefix. oh shit. Well, I won't release 3.2.4. I give up, sorry. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed May 20 08:55:55 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 20 May 2009 10:55:55 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.4 [STABLE] available Message-ID: <1242809755.23556.28.camel@scorpion.multitel.be> This is the fourth stable release of the 3.2 release series of Ekiga. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free audio and video calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2 (take 3.2.2) Required librairies can be found at: ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/ (take 3.6.2) ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ (take 2.6.2) * What's changed ? ================== It contains a fix for invalid OPAL and PTLIB recommended versions. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sevmek at free.fr Wed May 20 09:14:56 2009 From: sevmek at free.fr (yannick) Date: Wed, 20 May 2009 11:14:56 +0200 Subject: [Ekiga-list] [Ekiga-devel-list] ANNOUNCE - Ekiga 3.2.2 [STABLE] available In-Reply-To: <5256d0b0905200210q7e2ea83fhcfafac1861fbbca3@mail.gmail.com> References: <1242805937.23556.21.camel@scorpion.multitel.be> <5256d0b0905200125g6af53c7r4d90baf3d8427994@mail.gmail.com> <1242808516.23556.27.camel@scorpion.multitel.be> <5256d0b0905200210q7e2ea83fhcfafac1861fbbca3@mail.gmail.com> Message-ID: <4A13CA10.2000801@free.fr> Peter Robinson a ?crit : >> Well, I won't release 3.2.4. I give up, sorry. > > No issue, I've patched it now. No doubt there will be queries about it > so it was more a FYI. > > If you do a 3.2.4 release it would be nice to have bug 583260 looked > at [1]. In my F11 test env it doesn't start up (I don't get a icon in > the tray). > Well, there is a 3.2.4 now. I suppose it is better to rest a bit. There is some days worst than other... Still, congrats Damien :) From palos at post.sk Wed May 20 10:00:21 2009 From: palos at post.sk (Palo S.) Date: 20 May 2009 12:00:21 +0200 (CEST) Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.4 [STABLE] available Message-ID: <4A13D4B5.000001.18857@kamasutra> Thanks for all these bugfix releases! I know it must have been a pain. But the important thing is that it should be ok now. I will test soon as well (and perhaps only report any problems later - I think the developers deserve some rest now :) P. ----- Origin?lna Spr?va ----- Od: Damien Sandras Komu: , Ekiga mailing list , Ekiga mailing list Poslan?: 20.05.2009 10:55 Predmet: [Ekiga-list] ANNOUNCE - Ekiga 3.2.4 [STABLE] available > This is the fourth stable release of the 3.2 release series of Ekiga. > > > * What is it ? > ============== > > Ekiga is a free Voice over IP softphone allowing you to do free audio > and video calls over the Internet. > > Ekiga is the first Open Source application to support both H.323 and > SIP, as well as audio and video. Ekiga was formerly known as > GnomeMeeting. > > More information can be found at http://www.ekiga.org > > > * Where to get it ? > =================== > > Ekiga is available at: > ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2 (take 3.2.2) > > Required librairies can be found at: > ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/ (take 3.6.2) > ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ (take 2.6.2) > > > * What\'s changed ? > ================== > > It contains a fix for invalid OPAL and PTLIB recommended versions. > -- > _ Damien Sandras > (o- > //\\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ Be IP : http://www.beip.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > __________ http://www.tahaj.sk - Najnavstevovanejsia stranka slovenskeho downloadu From Gerhard.Stengel at o2online.de Thu May 21 17:29:22 2009 From: Gerhard.Stengel at o2online.de (Gerhard Stengel) Date: Thu, 21 May 2009 19:29:22 +0200 Subject: [Ekiga-list] compile problems with ekiga 3.2.4 Message-ID: <200905211929.22141.Gerhard.Stengel@o2online.de> Hello, I get following compiler error when I try to compile ekiga 3.2.4: ../../../../lib/engine/components/opal/h323-endpoint.cpp: In member function ?void Opal::H323::EndPoint::Register(const Opal::Account&)?: ../../../../lib/engine/components/opal/h323-endpoint.cpp:277: internal compiler error: in set_uids_in_ptset, at tree-ssa-structalias.c:4817 Please submit a full bug report, with preprocessed source if appropriate. See for instructions. It seems to be an internal compiler error, very strange. g++ --version delivers this result: g++ (SUSE Linux) 4.3.2 [gcc-4_3-branch revision 141291] I have a 64 bit machine. Does anyone have an idea how to fix that or work around the problem? best regards Gerhard From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu May 21 17:41:18 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 21 May 2009 19:41:18 +0200 Subject: [Ekiga-list] compile problems with ekiga 3.2.4 In-Reply-To: <200905211929.22141.Gerhard.Stengel@o2online.de> References: <200905211929.22141.Gerhard.Stengel@o2online.de> Message-ID: <4A15923E.7030700@pu-pm.univ-fcomte.fr> Gerhard Stengel wrote: > Hello, > > I get following compiler error when I try to compile ekiga 3.2.4: > > ../../../../lib/engine/components/opal/h323-endpoint.cpp: In member function > ?void Opal::H323::EndPoint::Register(const Opal::Account&)?: > ../../../../lib/engine/components/opal/h323-endpoint.cpp:277: internal > compiler error: in set_uids_in_ptset, at tree-ssa-structalias.c:4817 > Please submit a full bug report, > with preprocessed source if appropriate. > See for instructions. > > It seems to be an internal compiler error, very strange. > > g++ --version delivers this result: > g++ (SUSE Linux) 4.3.2 [gcc-4_3-branch revision 141291] > > I have a 64 bit machine. I have it too, and everything is fine, same compiler. > Does anyone have an idea how to fix that or work around the problem? Peter Robinson posted a bug report with crash and he told afterwards he cannot build anymore because of this, I cannot retrieve the bug report... The solution is to upgrade the compiler... Eugen From dfox94085 at gmail.com Thu May 21 17:43:06 2009 From: dfox94085 at gmail.com (David Fox) Date: Thu, 21 May 2009 10:43:06 -0700 Subject: [Ekiga-list] compile problems with ekiga 3.2.4 In-Reply-To: <200905211929.22141.Gerhard.Stengel@o2online.de> References: <200905211929.22141.Gerhard.Stengel@o2online.de> Message-ID: <359a3c580905211043p25c4031dm4b0a1900a45d371f@mail.gmail.com> On Thu, May 21, 2009 at 10:29 AM, Gerhard Stengel wrote: > Hello, > > ../../../../lib/engine/components/opal/h323-endpoint.cpp:277: internal > compiler error: in set_uids_in_ptset, at tree-ssa-structalias.c:4817 > Please submit a full bug report, I didn't have any issue here. I am also running 64-bit (Ubuntu Jaunty). Is the error repeatable? Have you tried compiling other source trees? Usually, an internal compiler error suggests a bug in gcc, or possibly a hardware issue (bad RAM) - #2 especially if there is a sig11 (segmentation violation). g++ on Jaunty is 4.3.3, if that makes a difference. -- thanks for letting me change the magnetic patterns on your hard disk. From vinifera at riseup.net Thu May 21 17:51:36 2009 From: vinifera at riseup.net (vin) Date: Thu, 21 May 2009 19:51:36 +0200 Subject: [Ekiga-list] how is the current state of ZRTP integration into Ekiga? Message-ID: <1242928296.3564.0.camel@kuzguz-B> Hi, how is the current state of ZRTP integration into Ekiga? I think it is stalled...-- greetz vin From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu May 21 18:03:25 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 21 May 2009 20:03:25 +0200 Subject: [Ekiga-list] how is the current state of ZRTP integration into Ekiga? In-Reply-To: <1242928296.3564.0.camel@kuzguz-B> References: <1242928296.3564.0.camel@kuzguz-B> Message-ID: <4A15976D.3040806@pu-pm.univ-fcomte.fr> vin wrote: > Hi, > > how is the current state of ZRTP integration into Ekiga? > I think it is stalled...-- Indeed. -- Eugen From Gerhard.Stengel at o2online.de Thu May 21 18:49:29 2009 From: Gerhard.Stengel at o2online.de (Gerhard Stengel) Date: Thu, 21 May 2009 20:49:29 +0200 Subject: [Ekiga-list] compile problems with ekiga 3.2.4 Message-ID: <200905212049.29393.Gerhard.Stengel@o2online.de> Hello, it's 100% reproducible, always stops at the same place. So I suppose it's no hardware problem. I've succesfully built quite a few other sources (at least latest ptlib and opal :-) , no problems at all. Seems like I have to file a bug report at Suse. regards Gerhard Am Donnerstag 21 Mai 2009 19:43:06 schrieb David Fox: > On Thu, May 21, 2009 at 10:29 AM, Gerhard Stengel > wrote: > > Hello, > > > > > ../../../../lib/engine/components/opal/h323-endpoint.cpp:277: internal > > compiler error: in set_uids_in_ptset, at tree-ssa-structalias.c:4817 > > Please submit a full bug report, > > I didn't have any issue here. I am also running 64-bit (Ubuntu > Jaunty). Is the error repeatable? Have you tried compiling other > source trees? Usually, an internal compiler error suggests a bug in > gcc, or possibly a hardware issue (bad RAM) - #2 especially if there > is a sig11 (segmentation violation). > > g++ on Jaunty is 4.3.3, if that makes a difference. > > > > -- > thanks for letting me change the magnetic patterns on your hard disk. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > ------------------------------------------------------------- From andrew.swerlick at gmail.com Fri May 22 05:33:44 2009 From: andrew.swerlick at gmail.com (Andrew Swerlick) Date: Fri, 22 May 2009 01:33:44 -0400 Subject: [Ekiga-list] Ekiga timeout trying to register with hostedsip.net since upgrade to version 3 In-Reply-To: <00163630ee1d0ea6610469c2067e@google.com> References: <00163630ee1d0ea6610469c2067e@google.com> Message-ID: Hi, I've had some trouble with ekiga ever since I upgraded to v3 last week. My company has a sip account with the provider hostedsip.net. In v2 I set up this account in ekiga's accounts section and everything worked fine, both inbound and out. However, since my upgrade, ekiga can no longer connect with the hostedsip.net account. Instead every time I get a time out error. Below is the relevant debug output. Any recommendations? Route: CSeq: 1 REGISTER Via: SIP/2.0/UDP 24.99.59.0:5060 ;branch=z9hG4bK42e92df2-d23d-de11-9808-001fe11b6237;rport User-Agent: Ekiga/3.2.0 From: >;tag=ecee28f2-d23d-de11-9808-001fe11b6237 Call-ID: f4aa0af2-d23d-de11-9808-001fe11b6237 at andrew-laptop To: > Contact: >;q=1, < sip:254 at 192.168.1.100 >;q=0.800, < sip:254 at 192.168.122.1 >;q=0.600, < sip:254 at 172.16.251.1 >;q=0.400, < sip:254 at 172.16.192.1 >;q=0.200 Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,SUBSCRIBE,NOTIFY,REFER,MESSAGE,INFO,PING Expires: 10000 Content-Length: 0 Max-Forwards: 70 2009/05/12 22:25:08.824 0:07.583 Housekeeper:0xb549cb90 OpalUDP Setting interface to 172.16.192.1%vmnet1 2009/05/12 22:25:08.829 0:07.588 Housekeeper:0xb549cb90 SIP Transaction 1 REGISTER timeout, making retry 1 2009/05/12 22:25:08.829 0:07.588 Housekeeper:0xb549cb90 OpalUDP Setting interface to 192.168.122.1%virbr0 2009/05/12 22:25:08.829 0:07.588 Housekeeper:0xb549cb90 SIP Set new interface 192.168.122.1%virbr0 for transport udp$65.168.93.26:5060 2009/05/12 22:25:08.830 0:07.589 Housekeeper:0xb549cb90 SIP Sending PDU (667 bytes) to: rem=udp$65.168.93.26:5060,local=udp$192.168.122.1:5060 ,if=192.168.122.1%virbr0 REGISTER sip:hostedsip.net SIP/2.0 Route: CSeq: 1 REGISTER Via: SIP/2.0/UDP 24.99.59.0:5060 ;branch=z9hG4bK229f2ef2-d23d-de11-9808-001fe11b6237;rport User-Agent: Ekiga/3.2.0 From: >;tag=ecee28f2-d23d-de11-9808-001fe11b6237 Call-ID: f4aa0af2-d23d-de11-9808-001fe11b6237 at andrew-laptop To: > Contact: >;q=1, < sip:254 at 192.168.1.100 >;q=0.800, < sip:254 at 192.168.122.1 >;q=0.600, < sip:254 at 172.16.251.1 >;q=0.400, < sip:254 at 172.16.192.1 >;q=0.200 Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,SUBSCRIBE,NOTIFY,REFER,MESSAGE,INFO,PING Expires: 10000 Content-Length: 0 Max-Forwards: 70 2009/05/12 22:25:08.830 0:07.589 Housekeeper:0xb549cb90 OpalUDP Setting interface to 172.16.192.1%vmnet1 2009/05/12 22:25:08.833 0:07.592 Housekeeper:0xb549cb90 SIP Transaction 1 REGISTER timeout, making retry 1 2009/05/12 22:25:08.834 0:07.593 Housekeeper:0xb549cb90 OpalUDP Setting interface to 172.16.251.1%vmnet8 2009/05/12 22:25:08.834 0:07.593 Housekeeper:0xb549cb90 SIP Set new interface 172.16.251.1%vmnet8 for transport udp$65.168.93.26:5060 2009/05/12 22:25:08.834 0:07.593 Housekeeper:0xb549cb90 SIP Sending PDU (667 bytes) to: rem=udp$65.168.93.26:5060,local=udp$172.16.251.1:5060 ,if=172.16.251.1%vmnet8 REGISTER sip:hostedsip.net SIP/2.0 -------------- next part -------------- An HTML attachment was scrubbed... URL: From Joseph.Comfort at asu.edu Sat May 23 22:59:54 2009 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Sat, 23 May 2009 15:59:54 -0700 (MST) Subject: [Ekiga-list] Compilation failure in 3.2.4 Message-ID: I am hitting compilation errors with the latest v3.2.4. I got through the ICE reported earlier by upgrading the gcc packages to v4.4 (from SuSE factory). Now I have the errors: ../../../../lib/engine/components/opal/opal-account.cpp: In member function ?void Opal::Account::on_edit_form_submitted(bool, Ekiga::Form&)?: ../../../../lib/engine/components/opal/opal-account.cpp:438: error: exception handling disabled, use -fexceptions to enable make[6]: *** [opal-account.lo] Error 1 I compiled the ptlib and opal libraries OK. As I recall, -fno-exceptions is used for opal. Is there now a conflict? How do I make a change without editing every Makefile? My goal is to get a working ekiga version on SuSE 11.1 (with KDE 3.5), on a 64-bit machine. It has been total frustration. Version 3.0.1 that comes with the system does not transmit sound either direction. I found and installed rpms for ekiga v3.2.4, and relevant libraries, from the SuSE build service. Execution immediately gave a segmentation fault. Thank you, Joe From Eugen.Dedu at pu-pm.univ-fcomte.fr Sun May 24 19:58:57 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sun, 24 May 2009 21:58:57 +0200 Subject: [Ekiga-list] Ekiga timeout trying to register with hostedsip.net since upgrade to version 3 In-Reply-To: References: <00163630ee1d0ea6610469c2067e@google.com> Message-ID: <4A19A701.7020200@pu-pm.univ-fcomte.fr> Andrew Swerlick wrote: > Hi, > > I've had some trouble with ekiga ever since I upgraded to v3 last week. My > company has a sip account with the provider hostedsip.net. In v2 I set up > this account in ekiga's accounts section and everything worked fine, both > inbound and out. However, since my upgrade, ekiga can no longer connect with > the hostedsip.net account. Instead every time I get a time out error. Below > is the relevant debug output. Any recommendations? > > > > > Route: > > CSeq: 1 REGISTER > > Via: SIP/2.0/UDP 24.99.59.0:5060 > ;branch=z9hG4bK42e92df2-d23d-de11-9808-001fe11b6237;rport > > User-Agent: Ekiga/3.2.0 > > From: >> ;tag=ecee28f2-d23d-de11-9808-001fe11b6237 > > Call-ID: f4aa0af2-d23d-de11-9808-001fe11b6237 at andrew-laptop > > To: > > > Contact: >;q=1, < > sip:254 at 192.168.1.100 >;q=0.800, < > sip:254 at 192.168.122.1 >;q=0.600, < > sip:254 at 172.16.251.1 >;q=0.400, < > sip:254 at 172.16.192.1 >;q=0.200 > > Allow: > INVITE,ACK,OPTIONS,BYE,CANCEL,SUBSCRIBE,NOTIFY,REFER,MESSAGE,INFO,PING > > Expires: 10000 > > Content-Length: 0 > > Max-Forwards: 70 > > > > > 2009/05/12 22:25:08.824 0:07.583 Housekeeper:0xb549cb90 OpalUDP Setting > interface to 172.16.192.1%vmnet1 > 2009/05/12 22:25:08.829 0:07.588 Housekeeper:0xb549cb90 SIP Transaction 1 > REGISTER timeout, making retry 1 > 2009/05/12 22:25:08.829 0:07.588 Housekeeper:0xb549cb90 OpalUDP Setting > interface to 192.168.122.1%virbr0 > 2009/05/12 22:25:08.829 0:07.588 Housekeeper:0xb549cb90 SIP Set new > interface 192.168.122.1%virbr0 for transport udp$65.168.93.26:5060 192.168.122.1:5060> > 2009/05/12 22:25:08.830 0:07.589 Housekeeper:0xb549cb90 SIP Sending PDU (667 > bytes) to: rem=udp$65.168.93.26:5060,local=udp$192.168.122.1:5060 > ,if=192.168.122.1%virbr0 > REGISTER sip:hostedsip.net SIP/2.0 > > Route: > > CSeq: 1 REGISTER > > Via: SIP/2.0/UDP 24.99.59.0:5060 > ;branch=z9hG4bK229f2ef2-d23d-de11-9808-001fe11b6237;rport > > User-Agent: Ekiga/3.2.0 > > From: >> ;tag=ecee28f2-d23d-de11-9808-001fe11b6237 > > Call-ID: f4aa0af2-d23d-de11-9808-001fe11b6237 at andrew-laptop > > To: > > > Contact: >;q=1, < > sip:254 at 192.168.1.100 >;q=0.800, < > sip:254 at 192.168.122.1 >;q=0.600, < > sip:254 at 172.16.251.1 >;q=0.400, < > sip:254 at 172.16.192.1 >;q=0.200 > > Allow: > INVITE,ACK,OPTIONS,BYE,CANCEL,SUBSCRIBE,NOTIFY,REFER,MESSAGE,INFO,PING > > Expires: 10000 > > Content-Length: 0 > > Max-Forwards: 70 > > > > > 2009/05/12 22:25:08.830 0:07.589 Housekeeper:0xb549cb90 OpalUDP Setting > interface to 172.16.192.1%vmnet1 > 2009/05/12 22:25:08.833 0:07.592 Housekeeper:0xb549cb90 SIP Transaction 1 > REGISTER timeout, making retry 1 > 2009/05/12 22:25:08.834 0:07.593 Housekeeper:0xb549cb90 OpalUDP Setting > interface to 172.16.251.1%vmnet8 > 2009/05/12 22:25:08.834 0:07.593 Housekeeper:0xb549cb90 SIP Set new > interface 172.16.251.1%vmnet8 for transport udp$65.168.93.26:5060 172.16.251.1:5060> > 2009/05/12 22:25:08.834 0:07.593 Housekeeper:0xb549cb90 SIP Sending PDU (667 > bytes) to: rem=udp$65.168.93.26:5060,local=udp$172.16.251.1:5060 > ,if=172.16.251.1%vmnet8 I am not sure, but I suppose it is because ekiga uses in the previous line your private address. This was a bug in 3.2.0 which got fixed in 3.2.1 (and subsequent). You see if you are hit by this bug if ekiga -d 4 2>&1 | grep STUN does not show smth like "Stun server... replied ... NAT". Solution: Either you upgrade, or re-compile with the patch http://git.gnome.org/cgit/ekiga/commit/?h=gnome-2-26&id=886c7668d815955b046f4270004503bd4256d388 applied. -- Eugen From jbeard4 at cs.mcgill.ca Sun May 24 23:24:10 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Sun, 24 May 2009 19:24:10 -0400 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy Message-ID: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> Hi all, Because it appears as though an Ekiga 3.2 backport for Ubuntu Hardy is not forthcoming, I'm attempting to build it from source by following the instructions listed here: http://wiki.ekiga.org/index.php/Compile_your_own_SVN_version_of_Ekiga_on_Ubuntu I'm attempting to compile against libopal 3.6.2 and libpt 2.6.2. Both build and install correctly. After a good beginning I get the following build error: ../../../../lib/engine/components/opal/opal-call-manager.cpp: In member function ?void Opal::C allManager::set_video_options(const Opal::CallManager::VideoOptions&)?: ../../../../lib/engine/components/opal/opal-call-manager.cpp:565: error: ?RateControlWindowSiz eOption? is not a member of ?OpalVideoFormat? ../../../../lib/engine/components/opal/opal-call-manager.cpp:567: error: ?RateControlMaxFrames SkipOption? is not a member of ?OpalVideoFormat? make[6]: *** [opal-call-manager.lo] Error 1 make[6]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine/componen ts/opal' make[5]: *** [all-recursive] Error 1 make[5]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine/componen ts' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0' make: *** [all] Error 2 I also just remembered to check here for the version of libopal and libpt that I should build against: http://www.gnomemeeting.org/index.php?rub=5&path=sources/ekiga_3.2.4 It looks like I'm using the right version of libopal and libpt, but I seem to be attempting to build an older version of ekiga (3.2.0 instead of 3.2.4). So, I just tried to download the source package from that page, but the link does not appear to work: http://www.ekiga.org/admin/downloads/latest/sources/ekiga_3.2.4/ekiga-3.2.4.tar.gz I have a few questions: Does anyone have any advice as to why the Ekiga 3.2.0 tag from SVN is not compiling? Also, why is Ekiga 3.2.4 not tagged in SVN? Finally, where can I obtain Ekiga 3.2.4? Please let me know. Thanks, Jake From jbeard4 at cs.mcgill.ca Mon May 25 01:00:11 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Sun, 24 May 2009 21:00:11 -0400 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> Message-ID: <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> I also just tried building Ekiga trunk, and got a different compilation error: gui/assistant.cpp: In function ?void name_changed_cb(GtkEntry*, GtkAssistant*)?: gui/assistant.cpp:348: error: ?gtk_entry_get_text_length? was not declared in this scope make[3]: *** [assistant.o] Error 1 make[3]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk' make: *** [all] Error 2 Any advice would be appreciated. Thanks, Jake On Sun, May 24, 2009 at 7:24 PM, Jacob Beard wrote: > Hi all, > > Because it appears as though an Ekiga 3.2 backport for Ubuntu Hardy is > not forthcoming, I'm attempting to build it from source by following > the instructions listed here: > > http://wiki.ekiga.org/index.php/Compile_your_own_SVN_version_of_Ekiga_on_Ubuntu > > I'm attempting to compile against libopal 3.6.2 and libpt 2.6.2. Both > build and install correctly. > > After a good beginning I get the following build error: > > ../../../../lib/engine/components/opal/opal-call-manager.cpp: In > member function ?void Opal::C > allManager::set_video_options(const Opal::CallManager::VideoOptions&)?: > ../../../../lib/engine/components/opal/opal-call-manager.cpp:565: > error: ?RateControlWindowSiz > eOption? is not a member of ?OpalVideoFormat? > ../../../../lib/engine/components/opal/opal-call-manager.cpp:567: > error: ?RateControlMaxFrames > SkipOption? is not a member of ?OpalVideoFormat? > make[6]: *** [opal-call-manager.lo] Error 1 > make[6]: Leaving directory > `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine/componen > ts/opal' > make[5]: *** [all-recursive] Error 1 > make[5]: Leaving directory > `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine/componen > ts' > make[4]: *** [all-recursive] Error 1 > make[4]: Leaving directory > `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine' > make[3]: *** [all-recursive] Error 1 > make[3]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib' > make[2]: *** [all] Error 2 > make[2]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0' > make: *** [all] Error 2 > > I also just remembered to check here for the version of libopal and > libpt that I should build against: > > http://www.gnomemeeting.org/index.php?rub=5&path=sources/ekiga_3.2.4 > > It looks like I'm using the right version of libopal and libpt, but I > seem to be attempting to build an older version of ekiga (3.2.0 > instead of 3.2.4). > > So, I just tried to download the source package from that page, but > the link does not appear to work: > > http://www.ekiga.org/admin/downloads/latest/sources/ekiga_3.2.4/ekiga-3.2.4.tar.gz > > I have a few questions: > > Does anyone have any advice as to why the Ekiga 3.2.0 tag from SVN is > not compiling? Also, why is Ekiga 3.2.4 not tagged in SVN? Finally, > where can I obtain Ekiga 3.2.4? > > Please let me know. Thanks, > > Jake > From jpuydt at free.fr Mon May 25 06:16:36 2009 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 25 May 2009 08:16:36 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> Message-ID: <4A1A37C4.8040504@free.fr> Jacob Beard a ?crit : > I also just tried building Ekiga trunk, and got a different compilation error: > > gui/assistant.cpp: In function ?void name_changed_cb(GtkEntry*, GtkAssistant*)?: > gui/assistant.cpp:348: error: ?gtk_entry_get_text_length? was not > declared in this scope > make[3]: *** [assistant.o] Error 1 > make[3]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' > make[2]: *** [all] Error 2 > make[2]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk' > make: *** [all] Error 2 > > Any advice would be appreciated. Thanks, The gtk_entry_get_text_length function is new in gtk+ 2.14 ; and the configure script only check for 2.12 :-( It's a mistake we did -- you should upgrade to gtk+ 2.14... Snark From dsandras at seconix.com Mon May 25 07:57:34 2009 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 25 May 2009 09:57:34 +0200 Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: References: Message-ID: <1243238254.4041.3.camel@scorpion.multitel.be> Le samedi 23 mai 2009 ? 15:59 -0700, Joseph Comfort a ?crit : > I am hitting compilation errors with the latest v3.2.4. I got through the > ICE reported earlier by upgrading the gcc packages to v4.4 (from SuSE > factory). > > Now I have the errors: > ../../../../lib/engine/components/opal/opal-account.cpp: In member > function ?void Opal::Account::on_edit_form_submitted(bool, Ekiga::Form&)?: > > ../../../../lib/engine/components/opal/opal-account.cpp:438: error: > exception handling disabled, use -fexceptions to enable > make[6]: *** [opal-account.lo] Error 1 > > I compiled the ptlib and opal libraries OK. As I recall, -fno-exceptions > is used for opal. Is there now a conflict? How do I make a change > without editing every Makefile? > > My goal is to get a working ekiga version on SuSE 11.1 (with KDE 3.5), on > a 64-bit machine. It has been total frustration. Version 3.0.1 that > comes with the system does not transmit sound either direction. I found > and installed rpms for ekiga v3.2.4, and relevant libraries, from the > SuSE build service. Execution immediately gave a segmentation fault. > It seems that your gcc is configured to not accept exceptions in C++ code. That is pretty weird. Check your default gcc configuration. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 09:22:52 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 11:22:52 +0200 Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: <1243238254.4041.3.camel@scorpion.multitel.be> References: <1243238254.4041.3.camel@scorpion.multitel.be> Message-ID: <4A1A636C.5060601@pu-pm.univ-fcomte.fr> Damien Sandras wrote: > Le samedi 23 mai 2009 ? 15:59 -0700, Joseph Comfort a ?crit : >> I am hitting compilation errors with the latest v3.2.4. I got through the >> ICE reported earlier by upgrading the gcc packages to v4.4 (from SuSE >> factory). >> >> Now I have the errors: >> ../../../../lib/engine/components/opal/opal-account.cpp: In member >> function ?void Opal::Account::on_edit_form_submitted(bool, Ekiga::Form&)?: >> >> ../../../../lib/engine/components/opal/opal-account.cpp:438: error: >> exception handling disabled, use -fexceptions to enable >> make[6]: *** [opal-account.lo] Error 1 >> >> I compiled the ptlib and opal libraries OK. As I recall, -fno-exceptions >> is used for opal. Is there now a conflict? How do I make a change >> without editing every Makefile? >> >> My goal is to get a working ekiga version on SuSE 11.1 (with KDE 3.5), on >> a 64-bit machine. It has been total frustration. Version 3.0.1 that >> comes with the system does not transmit sound either direction. I found >> and installed rpms for ekiga v3.2.4, and relevant libraries, from the >> SuSE build service. Execution immediately gave a segmentation fault. >> > > It seems that your gcc is configured to not accept exceptions in C++ > code. That is pretty weird. Check your default gcc configuration. No, this is a gcc 4.4 problem, for sure. There are about ten files which use exceptions, I think they have the same problem (grep 'catch *(' softs/ekiga/ekiga-svn/ -r). -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 09:28:34 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 11:28:34 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <4A1A37C4.8040504@free.fr> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> Message-ID: <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> Julien Puydt wrote: > Jacob Beard a ?crit : >> I also just tried building Ekiga trunk, and got a different >> compilation error: >> >> gui/assistant.cpp: In function ?void name_changed_cb(GtkEntry*, >> GtkAssistant*)?: >> gui/assistant.cpp:348: error: ?gtk_entry_get_text_length? was not >> declared in this scope >> make[3]: *** [assistant.o] Error 1 >> make[3]: Leaving directory >> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >> make[2]: *** [all] Error 2 >> make[2]: Leaving directory >> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >> make[1]: *** [all-recursive] Error 1 >> make[1]: Leaving directory >> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk' >> make: *** [all] Error 2 >> >> Any advice would be appreciated. Thanks, > > The gtk_entry_get_text_length function is new in gtk+ 2.14 ; and the > configure script only check for 2.12 :-( > > It's a mistake we did -- you should upgrade to gtk+ 2.14... A?e, it's me who add that gtk function without checking that it appeared in 2.14... Should I replace it with something for gtk 2.12? -- Eugen From mounir.lamouri at gmail.com Mon May 25 09:32:21 2009 From: mounir.lamouri at gmail.com (Mounir Lamouri) Date: Mon, 25 May 2009 11:32:21 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> Message-ID: <3201269c0905250232w642aa5cnef47a3401b31b065@mail.gmail.com> On Mon, May 25, 2009 at 11:28 AM, Eugen Dedu wrote: > Julien Puydt wrote: >> >> Jacob Beard a ?crit : >>> >>> I also just tried building Ekiga trunk, and got a different compilation >>> error: >>> >>> gui/assistant.cpp: In function ?void name_changed_cb(GtkEntry*, >>> GtkAssistant*)?: >>> gui/assistant.cpp:348: error: ?gtk_entry_get_text_length? was not >>> declared in this scope >>> make[3]: *** [assistant.o] Error 1 >>> make[3]: Leaving directory >>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >>> make[2]: *** [all] Error 2 >>> make[2]: Leaving directory >>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >>> make[1]: *** [all-recursive] Error 1 >>> make[1]: Leaving directory >>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk' >>> make: *** [all] Error 2 >>> >>> Any advice would be appreciated. Thanks, >> >> The gtk_entry_get_text_length function is new in gtk+ 2.14 ; and the >> configure script only check for 2.12 :-( >> >> It's a mistake we did -- you should upgrade to gtk+ 2.14... > > A?e, it's me who add that gtk function without checking that it appeared in > 2.14... > > Should I replace it with something for gtk 2.12? May be a good reason to move to a mandatory >=gtk-2.14 and remove this weird --enable-gnome which is useless if >=gtk-2.14 ? My 2 cents. Mounir From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 09:33:16 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 11:33:16 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> Message-ID: <4A1A65DC.5070709@pu-pm.univ-fcomte.fr> Jacob Beard wrote: > Hi all, > > Because it appears as though an Ekiga 3.2 backport for Ubuntu Hardy is > not forthcoming, I'm attempting to build it from source by following > the instructions listed here: > > http://wiki.ekiga.org/index.php/Compile_your_own_SVN_version_of_Ekiga_on_Ubuntu > > I'm attempting to compile against libopal 3.6.2 and libpt 2.6.2. Both > build and install correctly. > > After a good beginning I get the following build error: > > ../../../../lib/engine/components/opal/opal-call-manager.cpp: In > member function ?void Opal::C > allManager::set_video_options(const Opal::CallManager::VideoOptions&)?: > ../../../../lib/engine/components/opal/opal-call-manager.cpp:565: > error: ?RateControlWindowSiz > eOption? is not a member of ?OpalVideoFormat? > ../../../../lib/engine/components/opal/opal-call-manager.cpp:567: > error: ?RateControlMaxFrames > SkipOption? is not a member of ?OpalVideoFormat? > make[6]: *** [opal-call-manager.lo] Error 1 > make[6]: Leaving directory > `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine/componen > ts/opal' > make[5]: *** [all-recursive] Error 1 > make[5]: Leaving directory > `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine/componen > ts' > make[4]: *** [all-recursive] Error 1 > make[4]: Leaving directory > `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib/engine' > make[3]: *** [all-recursive] Error 1 > make[3]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib' > make[2]: *** [all] Error 2 > make[2]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0/lib' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/jacob/apps/ekiga-build-hardy/EKIGA_3_2_0' > make: *** [all] Error 2 > > I also just remembered to check here for the version of libopal and > libpt that I should build against: > > http://www.gnomemeeting.org/index.php?rub=5&path=sources/ekiga_3.2.4 Oh, when will gnomemeeting domain disappear? > It looks like I'm using the right version of libopal and libpt, but I > seem to be attempting to build an older version of ekiga (3.2.0 > instead of 3.2.4). You're right, you need ekiga 3.2.1 or 2,3,4. > So, I just tried to download the source package from that page, but > the link does not appear to work: > > http://www.ekiga.org/admin/downloads/latest/sources/ekiga_3.2.4/ekiga-3.2.4.tar.gz Until fixed, get it from http://wiki.ekiga.org/index.php/Download_Ekiga_sources instead. > I have a few questions: > > Does anyone have any advice as to why the Ekiga 3.2.0 tag from SVN is > not compiling? Also, why is Ekiga 3.2.4 not tagged in SVN? Finally, > where can I obtain Ekiga 3.2.4? 3.2.4 not tagged: it was an error, having forgot do to that. Does anyone know how to add a tag for a previous commit in git? -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 09:42:35 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 11:42:35 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <3201269c0905250232w642aa5cnef47a3401b31b065@mail.gmail.com> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> <3201269c0905250232w642aa5cnef47a3401b31b065@mail.gmail.com> Message-ID: <4A1A680B.6030207@pu-pm.univ-fcomte.fr> Mounir Lamouri wrote: > On Mon, May 25, 2009 at 11:28 AM, Eugen Dedu > wrote: >> Julien Puydt wrote: >>> Jacob Beard a ?crit : >>>> I also just tried building Ekiga trunk, and got a different compilation >>>> error: >>>> >>>> gui/assistant.cpp: In function ?void name_changed_cb(GtkEntry*, >>>> GtkAssistant*)?: >>>> gui/assistant.cpp:348: error: ?gtk_entry_get_text_length? was not >>>> declared in this scope >>>> make[3]: *** [assistant.o] Error 1 >>>> make[3]: Leaving directory >>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >>>> make[2]: *** [all] Error 2 >>>> make[2]: Leaving directory >>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >>>> make[1]: *** [all-recursive] Error 1 >>>> make[1]: Leaving directory >>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk' >>>> make: *** [all] Error 2 >>>> >>>> Any advice would be appreciated. Thanks, >>> The gtk_entry_get_text_length function is new in gtk+ 2.14 ; and the >>> configure script only check for 2.12 :-( >>> >>> It's a mistake we did -- you should upgrade to gtk+ 2.14... >> A?e, it's me who add that gtk function without checking that it appeared in >> 2.14... >> >> Should I replace it with something for gtk 2.12? > > May be a good reason to move to a mandatory >=gtk-2.14 and remove this > weird --enable-gnome which is useless if >=gtk-2.14 ? Debian stable still has 2.14... 2.16 appeared in october. -- Eugen From mounir.lamouri at gmail.com Mon May 25 09:48:12 2009 From: mounir.lamouri at gmail.com (Mounir Lamouri) Date: Mon, 25 May 2009 11:48:12 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <4A1A680B.6030207@pu-pm.univ-fcomte.fr> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> <3201269c0905250232w642aa5cnef47a3401b31b065@mail.gmail.com> <4A1A680B.6030207@pu-pm.univ-fcomte.fr> Message-ID: <3201269c0905250248u1d889fbdl91bd90ab084a69d@mail.gmail.com> On Mon, May 25, 2009 at 11:42 AM, Eugen Dedu wrote: > Mounir Lamouri wrote: >> >> On Mon, May 25, 2009 at 11:28 AM, Eugen Dedu >> wrote: >>> >>> Julien Puydt wrote: >>>> >>>> Jacob Beard a ?crit : >>>>> >>>>> I also just tried building Ekiga trunk, and got a different compilation >>>>> error: >>>>> >>>>> gui/assistant.cpp: In function ?void name_changed_cb(GtkEntry*, >>>>> GtkAssistant*)?: >>>>> gui/assistant.cpp:348: error: ?gtk_entry_get_text_length? was not >>>>> declared in this scope >>>>> make[3]: *** [assistant.o] Error 1 >>>>> make[3]: Leaving directory >>>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >>>>> make[2]: *** [all] Error 2 >>>>> make[2]: Leaving directory >>>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >>>>> make[1]: *** [all-recursive] Error 1 >>>>> make[1]: Leaving directory >>>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk' >>>>> make: *** [all] Error 2 >>>>> >>>>> Any advice would be appreciated. Thanks, >>>> >>>> The gtk_entry_get_text_length function is new in gtk+ 2.14 ; and the >>>> configure script only check for 2.12 :-( >>>> >>>> It's a mistake we did -- you should upgrade to gtk+ 2.14... >>> >>> A?e, it's me who add that gtk function without checking that it appeared >>> in >>> 2.14... >>> >>> Should I replace it with something for gtk 2.12? >> >> May be a good reason to move to a mandatory >=gtk-2.14 and remove this >> weird --enable-gnome which is useless if >=gtk-2.14 ? > > Debian stable still has 2.14... ?2.16 appeared in october. I'm confused. Isn't the function >=2.14 ? If 2.14 is Debian, that's ok. Don't understand why you talked about 2.16. Anyway, does next ekiga release is going to move to Debian stable soon ? Or you prefer to depend only on Debian stable to make it easier for users ? Mounir From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 09:57:31 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 11:57:31 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <3201269c0905250248u1d889fbdl91bd90ab084a69d@mail.gmail.com> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> <3201269c0905250232w642aa5cnef47a3401b31b065@mail.gmail.com> <4A1A680B.6030207@pu-pm.univ-fcomte.fr> <3201269c0905250248u1d889fbdl91bd90ab084a69d@mail.gmail.com> Message-ID: <4A1A6B8B.2000209@pu-pm.univ-fcomte.fr> Mounir Lamouri wrote: > On Mon, May 25, 2009 at 11:42 AM, Eugen Dedu > wrote: >> Mounir Lamouri wrote: >>> On Mon, May 25, 2009 at 11:28 AM, Eugen Dedu >>> wrote: >>>> Julien Puydt wrote: >>>>> Jacob Beard a ?crit : >>>>>> I also just tried building Ekiga trunk, and got a different compilation >>>>>> error: >>>>>> >>>>>> gui/assistant.cpp: In function ?void name_changed_cb(GtkEntry*, >>>>>> GtkAssistant*)?: >>>>>> gui/assistant.cpp:348: error: ?gtk_entry_get_text_length? was not >>>>>> declared in this scope >>>>>> make[3]: *** [assistant.o] Error 1 >>>>>> make[3]: Leaving directory >>>>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >>>>>> make[2]: *** [all] Error 2 >>>>>> make[2]: Leaving directory >>>>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk/src' >>>>>> make[1]: *** [all-recursive] Error 1 >>>>>> make[1]: Leaving directory >>>>>> `/home/jacob/apps/ekiga-build-hardy/EKIGA_trunk' >>>>>> make: *** [all] Error 2 >>>>>> >>>>>> Any advice would be appreciated. Thanks, >>>>> The gtk_entry_get_text_length function is new in gtk+ 2.14 ; and the >>>>> configure script only check for 2.12 :-( >>>>> >>>>> It's a mistake we did -- you should upgrade to gtk+ 2.14... >>>> A?e, it's me who add that gtk function without checking that it appeared >>>> in >>>> 2.14... >>>> >>>> Should I replace it with something for gtk 2.12? >>> May be a good reason to move to a mandatory >=gtk-2.14 and remove this >>> weird --enable-gnome which is useless if >=gtk-2.14 ? >> Debian stable still has 2.14... 2.16 appeared in october. > > I'm confused. Isn't the function >=2.14 ? If 2.14 is Debian, that's > ok. Don't understand why you talked about 2.16. Sorry for the confusion, debian stable has 2.12. > Anyway, does next ekiga release is going to move to Debian stable soon > ? Or you prefer to depend only on Debian stable to make it easier for > users ? To my knowledge, stable is updated only for RC bugs, not for classical upgrades, so it will remain with ekiga v2 :o( I just want to be easier for users. We can change the dependency right after the next ekiga stable. -- Eugen From jpuydt at free.fr Mon May 25 11:05:25 2009 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 25 May 2009 13:05:25 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> Message-ID: <4A1A7B75.1010608@free.fr> Eugen Dedu a ?crit : > A?e, it's me who add that gtk function without checking that it appeared > in 2.14... > > Should I replace it with something for gtk 2.12? > Yes, if that isn't too complex. We'll bump the version up later. Snark From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 12:15:48 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 14:15:48 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <4A1A7B75.1010608@free.fr> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> <4A1A7B75.1010608@free.fr> Message-ID: <4A1A8BF4.3000305@pu-pm.univ-fcomte.fr> Julien Puydt wrote: > Eugen Dedu a ?crit : >> A?e, it's me who add that gtk function without checking that it >> appeared in 2.14... >> >> Should I replace it with something for gtk 2.12? >> > Yes, if that isn't too complex. We'll bump the version up later. I done it (master + branch). -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 12:29:41 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 14:29:41 +0200 Subject: [Ekiga-list] Auto answering by ekiga In-Reply-To: <20090324091333.98E8D138D@mailweb.gpi.it> References: <20090324091333.98E8D138D@mailweb.gpi.it> Message-ID: <4A1A8F35.3030003@pu-pm.univ-fcomte.fr> Giampaolo Armellin wrote: > Is it possible to configure Ekiga to auto ansie calls? I would need to run > Ekiga in background, without using the user interface, just answering > incoming IP calls, each time they come. It seems it was implemented 1-2 weeks ago in master. -- Eugen From jpuydt at free.fr Mon May 25 12:36:09 2009 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 25 May 2009 14:36:09 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <4A1A8BF4.3000305@pu-pm.univ-fcomte.fr> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> <4A1A7B75.1010608@free.fr> <4A1A8BF4.3000305@pu-pm.univ-fcomte.fr> Message-ID: <4A1A90B9.8030903@free.fr> Eugen Dedu a ?crit : > Julien Puydt wrote: >> Eugen Dedu a ?crit : >>> A?e, it's me who add that gtk function without checking that it >>> appeared in 2.14... >>> >>> Should I replace it with something for gtk 2.12? >>> >> Yes, if that isn't too complex. We'll bump the version up later. > > I done it (master + branch). Thanks! Snark From otakuj462 at gmail.com Mon May 25 19:11:01 2009 From: otakuj462 at gmail.com (Jake B) Date: Mon, 25 May 2009 15:11:01 -0400 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <4A1A90B9.8030903@free.fr> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> <4A1A7B75.1010608@free.fr> <4A1A8BF4.3000305@pu-pm.univ-fcomte.fr> <4A1A90B9.8030903@free.fr> Message-ID: <8e648abd0905251211x5b7ba5f7lbec0df34cd45b3fa@mail.gmail.com> This doesn't appear to have made it into SVN trunk. Can you tell me where I should git pull from? Thanks, Jake On Mon, May 25, 2009 at 8:36 AM, Julien Puydt wrote: > Eugen Dedu a ?crit : >> >> Julien Puydt wrote: >>> >>> Eugen Dedu a ?crit : >>>> >>>> A?e, it's me who add that gtk function without checking that it appeared >>>> in 2.14... >>>> >>>> Should I replace it with something for gtk 2.12? >>>> >>> Yes, if that isn't too complex. We'll bump the version up later. >> >> I done it (master + branch). > > Thanks! > > Snark > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From Joseph.Comfort at asu.edu Mon May 25 19:13:31 2009 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Mon, 25 May 2009 12:13:31 -0700 (MST) Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: <4A1A636C.5060601@pu-pm.univ-fcomte.fr> References: <1243238254.4041.3.camel@scorpion.multitel.be> <4A1A636C.5060601@pu-pm.univ-fcomte.fr> Message-ID: On Mon, 25 May 2009, Eugen Dedu wrote: > Damien Sandras wrote: > > Le samedi 23 mai 2009 ? 15:59 -0700, Joseph Comfort a ?crit : > > > I am hitting compilation errors with the latest v3.2.4. I got through the > > > ICE reported earlier by upgrading the gcc packages to v4.4 (from SuSE > > > factory). > > > > > > Now I have the errors: > > > ../../../../lib/engine/components/opal/opal-account.cpp: In member > > > function ?void Opal::Account::on_edit_form_submitted(bool, Ekiga::Form&)?: > > > > > > ../../../../lib/engine/components/opal/opal-account.cpp:438: error: > > > exception handling disabled, use -fexceptions to enable > > > make[6]: *** [opal-account.lo] Error 1 > > > > > > I compiled the ptlib and opal libraries OK. As I recall, -fno-exceptions > > > is used for opal. Is there now a conflict? How do I make a change > > > without editing every Makefile? > > > > > > My goal is to get a working ekiga version on SuSE 11.1 (with KDE 3.5), on > > > a 64-bit machine. It has been total frustration. Version 3.0.1 that > > > comes with the system does not transmit sound either direction. I found > > > and installed rpms for ekiga v3.2.4, and relevant libraries, from the SuSE > > > build service. Execution immediately gave a segmentation fault. > > > > > > > It seems that your gcc is configured to not accept exceptions in C++ > > code. That is pretty weird. Check your default gcc configuration. > > No, this is a gcc 4.4 problem, for sure. > > There are about ten files which use exceptions, I think they have the same > problem (grep 'catch *(' softs/ekiga/ekiga-svn/ -r). > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > No, it's not that simple. The gcc man page says that, if the exceptions option is not specified, then GCC will normally enable it for g++ and disable it for gcc. However, -fno-exceptions gets specified by the configuration files (including the ptlib.pc file) for the compilations (including g++) of ptlib-2.6.2, opal-3.6.2, and ekiga-3.2.4. The compilation failure in ekiga is with g++, but it has explicitly been told 'no-exceptions'. The opal routine it was trying to use was also made with 'no-exceptions'. It looks like gcc4.4 is doing what it is told to do. Joe From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 19:41:15 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 21:41:15 +0200 Subject: [Ekiga-list] error building ekiga 3.2.0 on Ubunty Hardy In-Reply-To: <8e648abd0905251211x5b7ba5f7lbec0df34cd45b3fa@mail.gmail.com> References: <8e648abd0905241624t3e1a933etd433c7a4b23ae749@mail.gmail.com> <8e648abd0905241800t7d87fa8fh6f5a5c1a4bed6e80@mail.gmail.com> <4A1A37C4.8040504@free.fr> <4A1A64C2.6040402@pu-pm.univ-fcomte.fr> <4A1A7B75.1010608@free.fr> <4A1A8BF4.3000305@pu-pm.univ-fcomte.fr> <4A1A90B9.8030903@free.fr> <8e648abd0905251211x5b7ba5f7lbec0df34cd45b3fa@mail.gmail.com> Message-ID: <4A1AF45B.4000808@pu-pm.univ-fcomte.fr> svn => git http://git.gnome.org/cgit/ekiga/ Jake B wrote: > This doesn't appear to have made it into SVN trunk. Can you tell me > where I should git pull from? > > Thanks, > > Jake > > On Mon, May 25, 2009 at 8:36 AM, Julien Puydt wrote: >> Eugen Dedu a ?crit : >>> Julien Puydt wrote: >>>> Eugen Dedu a ?crit : >>>>> A?e, it's me who add that gtk function without checking that it appeared >>>>> in 2.14... >>>>> >>>>> Should I replace it with something for gtk 2.12? >>>>> >>>> Yes, if that isn't too complex. We'll bump the version up later. >>> I done it (master + branch). >> Thanks! >> >> Snark >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon May 25 20:35:39 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 25 May 2009 22:35:39 +0200 Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: References: <1243238254.4041.3.camel@scorpion.multitel.be> <4A1A636C.5060601@pu-pm.univ-fcomte.fr> Message-ID: <4A1B011B.2040306@pu-pm.univ-fcomte.fr> Joseph Comfort wrote: > On Mon, 25 May 2009, Eugen Dedu wrote: > >> Damien Sandras wrote: >>> Le samedi 23 mai 2009 ? 15:59 -0700, Joseph Comfort a ?crit : >>>> I am hitting compilation errors with the latest v3.2.4. I got through the >>>> ICE reported earlier by upgrading the gcc packages to v4.4 (from SuSE >>>> factory). >>>> >>>> Now I have the errors: >>>> ../../../../lib/engine/components/opal/opal-account.cpp: In member >>>> function ?void Opal::Account::on_edit_form_submitted(bool, Ekiga::Form&)?: >>>> >>>> ../../../../lib/engine/components/opal/opal-account.cpp:438: error: >>>> exception handling disabled, use -fexceptions to enable >>>> make[6]: *** [opal-account.lo] Error 1 >>>> >>>> I compiled the ptlib and opal libraries OK. As I recall, -fno-exceptions >>>> is used for opal. Is there now a conflict? How do I make a change >>>> without editing every Makefile? >>>> >>>> My goal is to get a working ekiga version on SuSE 11.1 (with KDE 3.5), on >>>> a 64-bit machine. It has been total frustration. Version 3.0.1 that >>>> comes with the system does not transmit sound either direction. I found >>>> and installed rpms for ekiga v3.2.4, and relevant libraries, from the SuSE >>>> build service. Execution immediately gave a segmentation fault. >>>> >>> It seems that your gcc is configured to not accept exceptions in C++ >>> code. That is pretty weird. Check your default gcc configuration. >> No, this is a gcc 4.4 problem, for sure. >> >> There are about ten files which use exceptions, I think they have the same >> problem (grep 'catch *(' softs/ekiga/ekiga-svn/ -r). >> >> -- >> Eugen >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > No, it's not that simple. The gcc man page says that, if the exceptions > option is not specified, then GCC will normally enable it for g++ and > disable it for gcc. > > However, -fno-exceptions gets specified by the configuration files > (including the ptlib.pc file) for the compilations (including g++) of > ptlib-2.6.2, opal-3.6.2, and ekiga-3.2.4. The compilation failure in > ekiga is with g++, but it has explicitly been told 'no-exceptions'. The > opal routine it was trying to use was also made with 'no-exceptions'. > > It looks like gcc4.4 is doing what it is told to do. Sorry, it was I meant: it is a g++-4.4 specificity (not problem). -- Eugen From Joseph.Comfort at asu.edu Mon May 25 22:40:48 2009 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Mon, 25 May 2009 15:40:48 -0700 (MST) Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: <4A1B011B.2040306@pu-pm.univ-fcomte.fr> References: <1243238254.4041.3.camel@scorpion.multitel.be> <4A1A636C.5060601@pu-pm.univ-fcomte.fr> <4A1B011B.2040306@pu-pm.univ-fcomte.fr> Message-ID: On Mon, 25 May 2009, Eugen Dedu wrote: > Joseph Comfort wrote: > > On Mon, 25 May 2009, Eugen Dedu wrote: > > > > > Damien Sandras wrote: > > > > Le samedi 23 mai 2009 ? 15:59 -0700, Joseph Comfort a ?crit : > > > > > I am hitting compilation errors with the latest v3.2.4. I got through > > > > > the > > > > > ICE reported earlier by upgrading the gcc packages to v4.4 (from SuSE > > > > > factory). > > > > > > > > > > Now I have the errors: > > > > > ../../../../lib/engine/components/opal/opal-account.cpp: In member > > > > > function ?void Opal::Account::on_edit_form_submitted(bool, > > > > > Ekiga::Form&)?: > > > > > > > > > > ../../../../lib/engine/components/opal/opal-account.cpp:438: error: > > > > > exception handling disabled, use -fexceptions to enable > > > > > make[6]: *** [opal-account.lo] Error 1 > > > > > > > > > > I compiled the ptlib and opal libraries OK. As I recall, > > > > > -fno-exceptions > > > > > is used for opal. Is there now a conflict? How do I make a change > > > > > without editing every Makefile? > > > > > > > > > > My goal is to get a working ekiga version on SuSE 11.1 (with KDE 3.5), > > > > > on > > > > > a 64-bit machine. It has been total frustration. Version 3.0.1 that > > > > > comes with the system does not transmit sound either direction. I > > > > > found > > > > > and installed rpms for ekiga v3.2.4, and relevant libraries, from the > > > > > SuSE > > > > > build service. Execution immediately gave a segmentation fault. > > > > > > > > > It seems that your gcc is configured to not accept exceptions in C++ > > > > code. That is pretty weird. Check your default gcc configuration. > > > No, this is a gcc 4.4 problem, for sure. > > > > > > There are about ten files which use exceptions, I think they have the same > > > problem (grep 'catch *(' softs/ekiga/ekiga-svn/ -r). > > > > > > -- > > > Eugen > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > No, it's not that simple. The gcc man page says that, if the exceptions > > option is not specified, then GCC will normally enable it for g++ and > > disable it for gcc. > > However, -fno-exceptions gets specified by the configuration files > > (including the ptlib.pc file) for the compilations (including g++) of > > ptlib-2.6.2, opal-3.6.2, and ekiga-3.2.4. The compilation failure in ekiga > > is with g++, but it has explicitly been told 'no-exceptions'. The opal > > routine it was trying to use was also made with 'no-exceptions'. > > > > It looks like gcc4.4 is doing what it is told to do. > > Sorry, it was I meant: it is a g++-4.4 specificity (not problem). > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > OK. But my original question is how to get ekiga3.2.4 to compile? I was forced to go to gcc 4.4 to get around an internal compiler failure reported earlier. How did anyone get ekiga to compile if exceptions are not allowed but at least 10 files use exceptions? Joe From schaefec at googlemail.com Mon May 25 23:07:39 2009 From: schaefec at googlemail.com (=?UTF-8?B?Q2hyaXN0aWFuIFNjaMOkZmVy?=) Date: Mon, 25 May 2009 19:07:39 -0400 Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: References: <1243238254.4041.3.camel@scorpion.multitel.be> <4A1A636C.5060601@pu-pm.univ-fcomte.fr> <4A1B011B.2040306@pu-pm.univ-fcomte.fr> Message-ID: <4A1B24BB.1070301@googlemail.com> Joseph Comfort wrote: > OK. But my original question is how to get ekiga3.2.4 to compile? I was > forced to go to gcc 4.4 to get around an internal compiler failure > reported earlier. How did anyone get ekiga to compile if exceptions are > not allowed but at least 10 files use exceptions? I recently compiled opal-3.6.2, ptlib-2.6.2 and ekiga-3.2.4 with success (gcc 4.3.3) for 64 Bit. I could send you these, let me know. Chris From mounir.lamouri at gmail.com Tue May 26 07:45:44 2009 From: mounir.lamouri at gmail.com (Mounir Lamouri) Date: Tue, 26 May 2009 09:45:44 +0200 Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: <4A1B24BB.1070301@googlemail.com> References: <1243238254.4041.3.camel@scorpion.multitel.be> <4A1A636C.5060601@pu-pm.univ-fcomte.fr> <4A1B011B.2040306@pu-pm.univ-fcomte.fr> <4A1B24BB.1070301@googlemail.com> Message-ID: <3201269c0905260045q751b3e0ewcd1d56ed83e36fc4@mail.gmail.com> On Tue, May 26, 2009 at 1:07 AM, Christian Sch?fer wrote: > Joseph Comfort wrote: > >> OK. But my original question is how to get ekiga3.2.4 to compile? I was >> forced to go to gcc 4.4 to get around an internal compiler failure reported >> earlier. ?How did anyone get ekiga to compile if exceptions are not allowed >> but at least 10 files use exceptions? > > I recently compiled opal-3.6.2, ptlib-2.6.2 and ekiga-3.2.4 with success > ?(gcc 4.3.3) for 64 Bit. I could send you these, let me know. No issues as described for me too. Some bugs but fixed. From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue May 26 14:58:12 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 26 May 2009 16:58:12 +0200 Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: References: <1243238254.4041.3.camel@scorpion.multitel.be> <4A1A636C.5060601@pu-pm.univ-fcomte.fr> <4A1B011B.2040306@pu-pm.univ-fcomte.fr> Message-ID: <4A1C0384.8060106@pu-pm.univ-fcomte.fr> Joseph Comfort wrote: > On Mon, 25 May 2009, Eugen Dedu wrote: > >> Joseph Comfort wrote: >>> On Mon, 25 May 2009, Eugen Dedu wrote: >>> >>>> Damien Sandras wrote: >>>>> Le samedi 23 mai 2009 ? 15:59 -0700, Joseph Comfort a ?crit : >>>>>> I am hitting compilation errors with the latest v3.2.4. I got through >>>>>> the >>>>>> ICE reported earlier by upgrading the gcc packages to v4.4 (from SuSE >>>>>> factory). >>>>>> >>>>>> Now I have the errors: >>>>>> ../../../../lib/engine/components/opal/opal-account.cpp: In member >>>>>> function ?void Opal::Account::on_edit_form_submitted(bool, >>>>>> Ekiga::Form&)?: >>>>>> >>>>>> ../../../../lib/engine/components/opal/opal-account.cpp:438: error: >>>>>> exception handling disabled, use -fexceptions to enable >>>>>> make[6]: *** [opal-account.lo] Error 1 >>>>>> >>>>>> I compiled the ptlib and opal libraries OK. As I recall, >>>>>> -fno-exceptions >>>>>> is used for opal. Is there now a conflict? How do I make a change >>>>>> without editing every Makefile? >>>>>> >>>>>> My goal is to get a working ekiga version on SuSE 11.1 (with KDE 3.5), >>>>>> on >>>>>> a 64-bit machine. It has been total frustration. Version 3.0.1 that >>>>>> comes with the system does not transmit sound either direction. I >>>>>> found >>>>>> and installed rpms for ekiga v3.2.4, and relevant libraries, from the >>>>>> SuSE >>>>>> build service. Execution immediately gave a segmentation fault. >>>>>> >>>>> It seems that your gcc is configured to not accept exceptions in C++ >>>>> code. That is pretty weird. Check your default gcc configuration. >>>> No, this is a gcc 4.4 problem, for sure. >>>> >>>> There are about ten files which use exceptions, I think they have the same >>>> problem (grep 'catch *(' softs/ekiga/ekiga-svn/ -r). >>>> >>>> -- >>>> Eugen >>>> _______________________________________________ >>>> ekiga-list mailing list >>>> ekiga-list at gnome.org >>>> http://mail.gnome.org/mailman/listinfo/ekiga-list >>>> >>> No, it's not that simple. The gcc man page says that, if the exceptions >>> option is not specified, then GCC will normally enable it for g++ and >>> disable it for gcc. >>> However, -fno-exceptions gets specified by the configuration files >>> (including the ptlib.pc file) for the compilations (including g++) of >>> ptlib-2.6.2, opal-3.6.2, and ekiga-3.2.4. The compilation failure in ekiga >>> is with g++, but it has explicitly been told 'no-exceptions'. The opal >>> routine it was trying to use was also made with 'no-exceptions'. >>> >>> It looks like gcc4.4 is doing what it is told to do. >> Sorry, it was I meant: it is a g++-4.4 specificity (not problem). >> >> -- >> Eugen >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > OK. But my original question is how to get ekiga3.2.4 to compile? I was > forced to go to gcc 4.4 to get around an internal compiler failure > reported earlier. How did anyone get ekiga to compile if exceptions are > not allowed but at least 10 files use exceptions? Well, wait a bit, someone is already working on that issue... -- Eugen From gerhard.stengel at o2online.de Tue May 26 19:33:54 2009 From: gerhard.stengel at o2online.de (Gerhard Stengel) Date: Tue, 26 May 2009 21:33:54 +0200 Subject: [Ekiga-list] [Solved] compile problems with ekiga 3.2.4 In-Reply-To: <200905212049.29393.Gerhard.Stengel@o2online.de> References: <200905212049.29393.Gerhard.Stengel@o2online.de> Message-ID: <200905262133.54516.Gerhard.Stengel@gmx.net> Am Donnerstag 21 Mai 2009 20:49:29 schrieb Gerhard Stengel: > Hello, > > it's 100% reproducible, always stops at the same place. So I suppose it's no > hardware problem. > > I've succesfully built quite a few other sources (at least latest ptlib and > opal :-) , no problems at all. > Seems like I have to file a bug report at Suse. I filed this bug report at Suse: http://bugzilla.novell.com/show_bug.cgi?id=506112 The solution is to update the g++ compiler from the repository. regards Gerhard > > Am Donnerstag 21 Mai 2009 19:43:06 schrieb David Fox: > > On Thu, May 21, 2009 at 10:29 AM, Gerhard Stengel > > wrote: > > > Hello, > > > > > > > > ../../../../lib/engine/components/opal/h323-endpoint.cpp:277: internal > > > compiler error: in set_uids_in_ptset, at tree-ssa-structalias.c:4817 > > > Please submit a full bug report, > > > > I didn't have any issue here. I am also running 64-bit (Ubuntu > > Jaunty). Is the error repeatable? Have you tried compiling other > > source trees? Usually, an internal compiler error suggests a bug in > > gcc, or possibly a hardware issue (bad RAM) - #2 especially if there > > is a sig11 (segmentation violation). > > > > g++ on Jaunty is 4.3.3, if that makes a difference. > > > > > > > > -- > > thanks for letting me change the magnetic patterns on your hard disk. > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > ------------------------------------------------------------- > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > From chris at seberino.org Fri May 29 01:06:36 2009 From: chris at seberino.org (chris at seberino.org) Date: Thu, 28 May 2009 18:06:36 -0700 Subject: [Ekiga-list] Help! Can't *send* audio. Can only *receive* audio. I know microphone works. Message-ID: <20090529010636.GD11332@seberino.org> I can hear another person with my headset and Ekiga during a SIP conversation. They can't hear me. I know the microphone is working because I can hear it picking up ambient sounds and sending them to my headphones. I'm using Ekiga 3.2 on an Ubuntu 9.04 desktop with a T60 Thinkpad laptop. Any help greatly appreciated. Chris From darkfena313 at gmail.com Fri May 29 02:23:34 2009 From: darkfena313 at gmail.com (Haneef Bashir) Date: Fri, 29 May 2009 05:23:34 +0300 Subject: [Ekiga-list] Help! Can't *send* audio. Can only *receive* audio. I know microphone works. In-Reply-To: <20090529010636.GD11332@seberino.org> References: <20090529010636.GD11332@seberino.org> Message-ID: <2258731e0905281923q11e36a06kd8194d19dfcaf011@mail.gmail.com> On Fri, May 29, 2009 at 4:06 AM, wrote: > > I can hear another person with my headset and Ekiga during a SIP > conversation. > > They can't hear me. > > I know the microphone is working because I can hear it picking up ambient > sounds and sending them to my headphones. > > I'm using Ekiga 3.2 on an Ubuntu 9.04 desktop with a T60 Thinkpad laptop. > > Any help greatly appreciated. > go to edit > preferences> audio device and make sure that's setup correctly. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jbeard4 at cs.mcgill.ca Fri May 29 04:12:00 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Fri, 29 May 2009 00:12:00 -0400 Subject: [Ekiga-list] Getting "Registration failed: forbidden" with my ekiga.net account Message-ID: <8e648abd0905282112x4f9a5103q87b3d16ab13695ea@mail.gmail.com> Hi, I seem to be getting a message that says "Registration failed: forbidden" every time I try to connect to my ekiga.net account. This only started happening very recently and corresponded, to some technical trouble I was having that was resolved after I reinstalled Ekiga (on Ubuntu Hardy). I have another SIP account on the provider voipstunt, and that's been working fine. I just changed my password as well, to ensure that that was not the issue. Running ekiga -d 4 does not seem to yield any interesting output (no output that reacts to registration either way). I don't believe ekiga.net has an admin interface, so I don't know what steps I can take to further troubleshoot this. My ekiga.net account is otakuj462 at ekiga.net. I'd greatly appreciate if someone could let me know. Thanks, Jake From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 29 06:42:01 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 29 May 2009 08:42:01 +0200 Subject: [Ekiga-list] Getting "Registration failed: forbidden" with my ekiga.net account In-Reply-To: <8e648abd0905282112x4f9a5103q87b3d16ab13695ea@mail.gmail.com> References: <8e648abd0905282112x4f9a5103q87b3d16ab13695ea@mail.gmail.com> Message-ID: <4A1F83B9.1040408@pu-pm.univ-fcomte.fr> Jacob Beard wrote: > Hi, > > I seem to be getting a message that says "Registration failed: > forbidden" every time I try to connect to my ekiga.net account. This > only started happening very recently and corresponded, to some > technical trouble I was having that was resolved after I reinstalled > Ekiga (on Ubuntu Hardy). I have another SIP account on the provider > voipstunt, and that's been working fine. I just changed my password as > well, to ensure that that was not the issue. Running ekiga -d 4 does > not seem to yield any interesting output (no output that reacts to > registration either way). > > I don't believe ekiga.net has an admin interface, so I don't know what > steps I can take to further troubleshoot this. My ekiga.net account is > otakuj462 at ekiga.net. I'd greatly appreciate if someone could let me > know. Send us the -d 4 output file, as show on the wiki site, debugging. -- Eugen From rankincj at yahoo.com Fri May 29 12:29:51 2009 From: rankincj at yahoo.com (Chris Rankin) Date: Fri, 29 May 2009 05:29:51 -0700 (PDT) Subject: [Ekiga-list] Any problems with ekiga-3.x and siproxd-0.7? Message-ID: <224180.83968.qm@web52911.mail.re2.yahoo.com> Hi, I run ekiga on a small internal Fedora-based network that sits behind a masquerading gateway (which runs siproxd and has no X server) and an ADSL modem. Everything *used* to work fine, but I recently needed to replace the failing hard disk on my gateway machine... After installing Debian 5.0 on my gateway's new main drive, I found that although I could still register with ekiga.net, I could no longer contact any of the test services, e.g. 500 at ekiga.net. Instead, I was getting "Cannot contact remote host" errors. Fedora 10 uses ekiga 3.0.2, and so I tried upgrading to ekiga 3.2.4. Then I got "User is not available" errors. (And what on Earth is "pc:udp$ekiga.net:5060" doing in the call bar instead of the address I'm trying to call? Is it meant to be there?) When I remove my outbound proxy from the SIP Settings then I can at least connect to 500 at ekiga.net and transmit RTP packets, although I obviously do not receive the incoming RTP stream. However, I can't believe that siproxd is my problem because I restored the exact same (and *working*) siproxd installation from before the disk upgrade and I still can't connect to ekiga.net. Anyway, I'm running out of ideas as to what can possibly be wrong here. The ony thing I can think of is that maybe ekiga changed its behaviour with siproxd somewhere between ekiga-3.0.1 (which I think worked OK) and ekiga-3.0.2. Can anyone suggest anything which might be causing these problems, please? Thanks, Chris From rankincj at yahoo.com Fri May 29 13:26:13 2009 From: rankincj at yahoo.com (Chris Rankin) Date: Fri, 29 May 2009 06:26:13 -0700 (PDT) Subject: [Ekiga-list] Follow-up: Any problems with ekiga-3.x and siproxd-0.7? Message-ID: <753076.41880.qm@web52910.mail.re2.yahoo.com> Additionally: I've mananged to make an outgoing call to another ekiga.net user, although the call dropped out after 30 seconds. (It remained connected, although we stopped exchanging packets.) An incoming call did not work at all, although that could easily have been a problem with my router. The last time that I had the "dropped call after 30 seconds" problem, we solved it by calling each other directly and removing ekiga.net from the loop. Another thing I've noticed with ekiga-3.2.4 is that playing the "New instant message" sound from the Preferences generates an error message dialogue. That can't be right... Anyway, I'm downgrading to the Fedora 11 packages again. But it looks like there are problems at ekiga.net. Cheers, Chris From davidtangye at gmail.com Fri May 29 13:41:14 2009 From: davidtangye at gmail.com (David Tangye) Date: Fri, 29 May 2009 23:41:14 +1000 Subject: [Ekiga-list] Follow-up: Any problems with ekiga-3.x and siproxd-0.7? In-Reply-To: <753076.41880.qm@web52910.mail.re2.yahoo.com> References: <753076.41880.qm@web52910.mail.re2.yahoo.com> Message-ID: I have upgraded to 3.2.0 as part of upgrading to Ubuntu 9.04 2 weeks ago, and am having trouble too. Calls made via ekiga.net fail, and others who are online appear offline. Calls via a VOIP provider using sip to real phones still work fine. I wiped .gconf/apps/ekiga and started again, but it makes no difference. Ekiga is bugged badly somewhere between 3.2.x and ekiga.net. I don't know whether this is related, but I wonder if .gconf/apps/ekiga/contacts/%gconf.xml gets corrupted, eg from line 8 - the history data. Is this how its meant to look? Here are the first 11 lines: <?xml version="1.0"?> <list><entry uri="sip:tuxta2 at ekiga.net" type="1"><name>tuxta2 at ekiga.net</name><call_start>1243569428</call_start><call_duration/></entry><entry uri="sip:tuxta2 at ekiga.net " type=& quot;1"><name>tuxta2 at ekiga.net</name><call_start>1243569463</call_start><call_duration/></entry><entry uri="sip:tuxta2 at ekiga.net " type=& quot;1"><name>tuxta2 at ekiga.net</name><call_start>1243569498</call_start><call_duration/></entry><entry uri="sip:500 at ekiga.net " type=& quot;1"><name>500 at ekiga.net</name><call_start>1243569675</call_start><call_duration>00:01:44</call_duration></entry><entry uri="sip:tuxta2 at ekiga.net " type=& quot;1"><name>tuxta2 at ekiga.net</name><call_start>1243569791</call_start><call_duration/></entry><entry uri="sip:0438826493 at sip1.exetel.com.au" type="1"><name>0438826493 at sip1.exetel.com.au</name><call_start>1243569902</call_start><call_duration/></entry><entry uri="sip:501 at ekiga.net " type=& quot;1"><name>501 at ekiga.net</name><call_start>1243601077</call_start><call_duration>00:00:18</call_duration></entry><entry uri="sip:500 at ekiga.net " type=& quot;1"><name>500 at ekiga.net</name><call_start>1243601105</call_start><call_duration>00:00:27</call_duration></entry><entry uri="sip:c.j.rankin at ekiga.net " type="0"><name>Chris Rankin</name><call_start>1243601164</call_start><call_duration>00:00:38</call_duration></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net</name><call_start>1243601272</call_start><call_duration/></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net</name><call_start>1243601285</call_start><call_duration/></entry><entry uri="sip:c.j.rankin at ekiga.net " type="0"><name>Chris Rankin</name><call_start>1243601343</call_start><call_duration>00:00:38</call_duration></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net</name><call_start>1243601393</call_start><call_duration/></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net</name><call_start>1243601554</call_start><call_duration/></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net</name><call_start>1243601581</call_start><call_duration/></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net</name><call_start>1243601633</call_start><call_duration></call_duration></entry><entry uri="sip:c.j.rankin at ekiga.net " type="0"><name>Chris Rankin</name><call_start>1243601828</call_start><call_duration>00:00:38</call_duration></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net</name><call_start>1243602028</call_start><call_duration></call_duration></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net</name><call_start>1243602287</call_start><call_duration></call_duration></entry><entry uri="sip:c.j.rankin at ekiga.net " type="1"><name>c.j.rankin at ekiga.net </name><call_start>1243603269</call_start><call_duration></call_duration></entry></list> -- Cheers David Tangye Global warming is on hold until our western leaders get their economies under control. The Last Great Frontier is in Your Mind On Fri, May 29, 2009 at 11:26 PM, Chris Rankin wrote: > > Additionally: > > I've mananged to make an outgoing call to another ekiga.net user, although > the call dropped out after 30 seconds. (It remained connected, although we > stopped exchanging packets.) An incoming call did not work at all, although > that could easily have been a problem with my router. > > The last time that I had the "dropped call after 30 seconds" problem, we > solved it by calling each other directly and removing ekiga.net from the > loop. > > Another thing I've noticed with ekiga-3.2.4 is that playing the "New > instant message" sound from the Preferences generates an error message > dialogue. That can't be right... > > Anyway, I'm downgrading to the Fedora 11 packages again. But it looks like > there are problems at ekiga.net. > > Cheers, > Chris > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rankincj at yahoo.com Fri May 29 13:47:30 2009 From: rankincj at yahoo.com (Chris Rankin) Date: Fri, 29 May 2009 06:47:30 -0700 (PDT) Subject: [Ekiga-list] ekiga 3.2.x hates playing "newmessage.wav" Message-ID: <28672.45063.qm@web52904.mail.re2.yahoo.com> Every time ekiga 3.2.x plays this WAV file, I get an error message saying: "Error while opening audio output device SB Audigy 2 ZS [SB0353] No incoming sound will be played. The selected audio device was successfully opened but it is impossible to write data to this device. In case it is a pluggable device it may be sufficient to reconnect it. If not, or if it still is not accessible, please check your audio setup." Yes, it does play the sound too, so I'm thinking that the error is bogus. Cheers, Chris From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 29 17:30:29 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 29 May 2009 19:30:29 +0200 Subject: [Ekiga-list] Compilation failure in 3.2.4 In-Reply-To: References: Message-ID: <4A201BB5.1060103@pu-pm.univ-fcomte.fr> Joseph Comfort wrote: > I am hitting compilation errors with the latest v3.2.4. I got through the > ICE reported earlier by upgrading the gcc packages to v4.4 (from SuSE > factory). > > Now I have the errors: > ../../../../lib/engine/components/opal/opal-account.cpp: In member > function ?void Opal::Account::on_edit_form_submitted(bool, Ekiga::Form&)?: > > ../../../../lib/engine/components/opal/opal-account.cpp:438: error: > exception handling disabled, use -fexceptions to enable > make[6]: *** [opal-account.lo] Error 1 > > I compiled the ptlib and opal libraries OK. As I recall, -fno-exceptions > is used for opal. Is there now a conflict? How do I make a change > without editing every Makefile? > > My goal is to get a working ekiga version on SuSE 11.1 (with KDE 3.5), on > a 64-bit machine. It has been total frustration. Version 3.0.1 that > comes with the system does not transmit sound either direction. I found > and installed rpms for ekiga v3.2.4, and relevant libraries, from the > SuSE build service. Execution immediately gave a segmentation fault. > This was fixed by Julien: - master: http://git.gnome.org/cgit/ekiga/commit/?id=c518562795472f9d7ca2a1bf0eebee5c7a8a9b7e - branch: http://git.gnome.org/cgit/ekiga/commit/?h=gnome-2-26&id=003cfbe17c819cade65ed79bbe049dfb1974d226 -- Eugen From chris at seberino.org Fri May 29 17:48:40 2009 From: chris at seberino.org (chris at seberino.org) Date: Fri, 29 May 2009 10:48:40 -0700 Subject: [Ekiga-list] Help! Can't *send* audio. Can only *receive* audio. I know microphone works. In-Reply-To: <2258731e0905281923q11e36a06kd8194d19dfcaf011@mail.gmail.com> References: <20090529010636.GD11332@seberino.org> <2258731e0905281923q11e36a06kd8194d19dfcaf011@mail.gmail.com> Message-ID: <20090529174840.GC17509@seberino.org> On Fri, May 29, 2009 at 05:23:34AM +0300, Haneef Bashir wrote: > Any help greatly appreciated. > go to edit > preferences> audio device and make sure that's setup correctly. All 3 selections for audio devices are "Default (PTLIB/ALSA)". What should they be? I presume the one to focus on is "Input device". There are only 4 choices, WAV file, SILENT, "Default (PTLIB/ALSA)" and HDA Intel. cs From jbeard4 at cs.mcgill.ca Fri May 29 17:51:31 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Fri, 29 May 2009 13:51:31 -0400 Subject: [Ekiga-list] Getting "Registration failed: forbidden" with my ekiga.net account In-Reply-To: <4A1F83B9.1040408@pu-pm.univ-fcomte.fr> References: <8e648abd0905282112x4f9a5103q87b3d16ab13695ea@mail.gmail.com> <4A1F83B9.1040408@pu-pm.univ-fcomte.fr> Message-ID: <8e648abd0905291051i71a578eckbb47e4b8124e073c@mail.gmail.com> Hm, it seems to be working now. I'll send more information if it turns out the problem has not resolved itself. Thanks, Jake On Fri, May 29, 2009 at 2:42 AM, Eugen Dedu wrote: > Jacob Beard wrote: >> >> Hi, >> >> I seem to be getting a message that says "Registration failed: >> forbidden" every time I try to connect to my ekiga.net account. This >> only started happening very recently and corresponded, to some >> technical trouble I was having that was resolved after I reinstalled >> Ekiga (on Ubuntu Hardy). I have another SIP account on the provider >> voipstunt, and that's been working fine. I just changed my password as >> well, to ensure that that was not the issue. Running ekiga -d 4 does >> not seem to yield any interesting output (no output that reacts to >> registration either way). >> >> I don't believe ekiga.net has an admin interface, so I don't know what >> steps I can take to further troubleshoot this. My ekiga.net account is >> otakuj462 at ekiga.net. I'd greatly appreciate if someone could let me >> know. > > Send us the -d 4 output file, as show on the wiki site, debugging. > > -- > Eugen > From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 29 18:21:48 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 29 May 2009 20:21:48 +0200 Subject: [Ekiga-list] Help! Can't *send* audio. Can only *receive* audio. I know microphone works. In-Reply-To: <20090529174840.GC17509@seberino.org> References: <20090529010636.GD11332@seberino.org> <2258731e0905281923q11e36a06kd8194d19dfcaf011@mail.gmail.com> <20090529174840.GC17509@seberino.org> Message-ID: <4A2027BC.40900@pu-pm.univ-fcomte.fr> chris at seberino.org wrote: > On Fri, May 29, 2009 at 05:23:34AM +0300, Haneef Bashir wrote: >> Any help greatly appreciated. >> go to edit > preferences> audio device and make sure that's setup correctly. > > All 3 selections for audio devices are "Default (PTLIB/ALSA)". > > What should they be? > > I presume the one to focus on is "Input device". There are only 4 choices, WAV > file, SILENT, "Default (PTLIB/ALSA)" and HDA Intel. They are ok. Send us a -d 4 output. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri May 29 18:46:33 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 29 May 2009 20:46:33 +0200 Subject: [Ekiga-list] ekiga 3.2.x hates playing "newmessage.wav" In-Reply-To: <28672.45063.qm@web52904.mail.re2.yahoo.com> References: <28672.45063.qm@web52904.mail.re2.yahoo.com> Message-ID: <4A202D89.8070004@pu-pm.univ-fcomte.fr> Chris Rankin wrote: > Every time ekiga 3.2.x plays this WAV file, I get an error message saying: > > "Error while opening audio output device SB Audigy 2 ZS [SB0353] > > No incoming sound will be played. > > The selected audio device was successfully opened but it is impossible to write data to this device. In case it is a pluggable device it may be sufficient to reconnect it. If not, or if it still is not accessible, please check your audio setup." > > Yes, it does play the sound too, so I'm thinking that the error is bogus. Do you use linux or windows? Could you tell us among the five .wav, which shows this error and which not? Could you send us the -d 4 output? -- Eugen From chris at seberino.org Fri May 29 18:54:07 2009 From: chris at seberino.org (chris at seberino.org) Date: Fri, 29 May 2009 11:54:07 -0700 Subject: [Ekiga-list] [chris@seberino.org: Re: Help! Can't *send* audio. Can only *receive* audio. I know microphone works.] Message-ID: <20090529185407.GG17509@seberino.org> On Fri, May 29, 2009 at 08:21:48PM +0200, Eugen Dedu wrote: >> I presume the one to focus on is "Input device". There are only 4 choices, WAV >> file, SILENT, "Default (PTLIB/ALSA)" and HDA Intel. > > They are ok. > > Send us a -d 4 output. I noticed that the mixer tab which I use to turn the mic on/off was laelled "HDA Intel" so I switched Ekiga's "Input device" from ALSA to "HDA Intel". Could that be the problem? I don't know what the diff is between "HDA Intel" and the "Default (PTLIB/ALSA)" setting. The mailserver wouldn't let me append the long -d 4 output so I placed it here: http://seberino.org/ekigaoutput cs From f.vonbock at gmail.com Sat May 30 05:58:40 2009 From: f.vonbock at gmail.com (Fedor vonBock) Date: Sat, 30 May 2009 08:58:40 +0300 Subject: [Ekiga-list] usb to phone connector In-Reply-To: References: <49CA8BAA.8080908@gmail.com> <598e9210903251404q67966ac3jcb47600d598559c5@mail.gmail.com> <598e9210903251714je6cee4aw477ec7c2b8f8a078@mail.gmail.com> Message-ID: hi, has anyone ever tried this out on ubuntu? On Fri, Mar 27, 2009 at 2:41 PM, michel memeteau wrote: > > > 2009/3/27 Fedor vonBock > >> where can i but it from? >> > > As I said , I can sell you this one : > > http://memeteau.free.fr/usbb2k/b_b2kk01.JPG > > Which allow you to use a real phone with Ekiga through USB > >> >> >> On Thu, Mar 26, 2009 at 10:49 AM, michel memeteau < >> michel.memeteau at gmail.com> wrote: >> >>> 2009/3/26 Simos >>> > >>> > What is meant in the initial question is to have a USB gadget that >>> allows an analog telephone device >>> > to use Ekiga and make phonecalls. >>> >>> A yealink USB-B2K then. I still have one ( a Wengobox ) to sell if >>> anyone interested. >>> >>> http://memeteau.free.fr/usbb2k/b_b2kk01.JPG >>> _______________________________________________ >>> ekiga-list mailing list >>> ekiga-list at gnome.org >>> http://mail.gnome.org/mailman/listinfo/ekiga-list >>> >> >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > > > > -- > %<------------------------------------------------------->% > Michel memeteau > Blog 0.2 : http://memeteau.free.fr > Fixe : 0974763294 Mobile : 0624808051 > VOIP | Visio: sip:freechelmi at ippi.fr > jabber/GTalk : xmpp:freechelmi at jabber.fr > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat May 30 08:37:30 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 30 May 2009 10:37:30 +0200 Subject: [Ekiga-list] ekiga 3.2.x hates playing "newmessage.wav" In-Reply-To: <28672.45063.qm@web52904.mail.re2.yahoo.com> References: <28672.45063.qm@web52904.mail.re2.yahoo.com> Message-ID: <4A20F04A.3050801@pu-pm.univ-fcomte.fr> Chris Rankin wrote: > Every time ekiga 3.2.x plays this WAV file, I get an error message saying: > > "Error while opening audio output device SB Audigy 2 ZS [SB0353] > > No incoming sound will be played. > > The selected audio device was successfully opened but it is impossible to write data to this device. In case it is a pluggable device it may be sufficient to reconnect it. If not, or if it still is not accessible, please check your audio setup." > > Yes, it does play the sound too, so I'm thinking that the error is bogus. I see nothing wrong... Could you give us a new log with this wav file and another one, to see what's the difference? -- Eugen From pl26mary at aol.com Sat May 30 10:58:06 2009 From: pl26mary at aol.com (pl26mary at aol.com) Date: Sat, 30 May 2009 06:58:06 -0400 Subject: [Ekiga-list] Echo test failure on Windows XP, Ekiga 3.0.2 Message-ID: <8CBAF2CA59422CA-1254-1526@WEBMAIL-DZ25.sysops.aol.com> Hello. I am a new user. I know little about Windows XP or Ekiga. I have installed Ekiga 3.0.2 and the configuration thing complained that it could not set up the network stuff and it referred me to a web page about port forwarding. I have a BT HomeHub 2 router and I have experimented with port forwarding settings on it, to no avail. They are currently set to those at the bottom of http://www.pclinuxos.com/index.php?option=com_smf&Itemid=58&action=printpage;topic=51154.0 and I can easily try different settings. On Windows I have ZoneAlarm turned off. I can't work out how to get any output from ekiga with -d 4, it doesn't print anything, it just gives me a new prompt even though Ekiga is still running. Is that debug output a Linux-only feature? When I start Ekiga it appears to register my Ekiga account quite happily and find my audio and video devices just fine. When I call 500 at ekiga.net the call connects. However, I get no audio or video coming back during the call. Can anyone help? I'm sorry if I missed a webpage that would help, I've been a little lost among the various ones, and not sure which versions of what they still worked for. Thanks, Mary -------------- next part -------------- An HTML attachment was scrubbed... URL: From f.vonbock at gmail.com Sat May 30 20:55:03 2009 From: f.vonbock at gmail.com (Fedor vonBock) Date: Sat, 30 May 2009 23:55:03 +0300 Subject: [Ekiga-list] convert from pstn line to ekiga Message-ID: Hi, I was wondering whether or not this was possible? I'd like to dial in a landline number (my home number) and have it redirected to ekiga, then I want to use some sort of call forwarding to make ekiga call a certain number.... why would I want to do this? 'cause then i could call the landline using a mobile phone and it would redirect into an internation number and all i'll be charged by is the local call (very cheap) and the ekiga call to the international number (even cheaper) i know it sounds magical, but i think it's doable -------------- next part -------------- An HTML attachment was scrubbed... URL: From terry.cudney at gmail.com Sat May 30 21:06:34 2009 From: terry.cudney at gmail.com (Terry D. Cudney) Date: Sat, 30 May 2009 17:06:34 -0400 Subject: [Ekiga-list] convert from pstn line to ekiga In-Reply-To: References: Message-ID: <20090530210634.GA485@braille.uwo.ca> Hello Fedor, I'm not an ekiga expert, but I don't think it is possible using ekiga. With asterisk, this could be done with an fxo (or ata with fxo) port connected to the pstn. You would then route the outgoing call over the voip connection to wherever. Many asterisk users are doing this with their cell phone's 'buddy' list, where they have their cell phone number as one of the five buddies with unlimited calling, no minutes counted. they make all outgoing calls from their cell phone through their home asterisk setup. If ekiga can handle a pstn connection bridged to the voip connection, perhaps it can be done... I'll let the ekiga experts comment here. --terry On Sat, May 30, 2009 at 11:55:03PM +0300, Fedor vonBock wrote: > Hi, > > I was wondering whether or not this was possible? > > I'd like to dial in a landline number (my home number) and have it > redirected to ekiga, then I want to use some sort of call forwarding to make > ekiga call a certain number.... > > why would I want to do this? 'cause then i could call the landline using a > mobile phone and it would redirect into an internation number and all i'll > be charged by is the local call (very cheap) and the ekiga call to the > international number (even cheaper) > > i know it sounds magical, but i think it's doable > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Name: Terry D. Cudney Phone: 705-812-4949 SIP: 8978 at ekiga.net E-mail: terry at octothorp.org Having a smoking section in a restaurant is like... having a peeing sectionin a swimming pool. Tired of technology? Check this out: http://www.shibumi.org/eoti.htm From joerlend.schinstad at gmail.com Sun May 31 07:20:00 2009 From: joerlend.schinstad at gmail.com (Jo-Erlend Schinstad) Date: Sun, 31 May 2009 09:20:00 +0200 Subject: [Ekiga-list] convert from pstn line to ekiga In-Reply-To: <20090530210634.GA485@braille.uwo.ca> References: <20090530210634.GA485@braille.uwo.ca> Message-ID: You're right, this is a feature for Asterisk, not Ekiga. Asterisk is a professional free software solution for internet and PTSN telephony. You'll need to fiddle a bit with it in order to configure it properly, but it's fun and very useful. It's available in Ubuntus repositories. You can use Asterisk to provide advanced voip services and optionally connect your home PTSN connection to it to make it available from other PTSN phones. Newer mobile phones are also able to connect to Asterisk using a built-in SIP client. There is also work under way to make push-to-talk capabilities available, but I don't know how far they've come. Have fun! :) Jo-Erlend Schinstad