[Ekiga-list] DTMF and Asterisk?

[Michael]

Damien:

Just received additional information on this problem. If any user uses Ekiga and they press a digit the digit will sound as if it is continually pressed (never left go of it). For example if I called you and accidentally pressed ZERO you would hear the number ZERO beep to infinity. This must be the problem with DTMF tones. Instead of being a short beep it is as if the number is stuck and continually gives a prolonged beeeeeee....(never ending) ....p. 

Any ideas?

----- Original Message ----
From: Damien Sandras <dsandras at seconix.com>
To: Ekiga mailing list <ekiga-list at gnome.org>
Sent: Saturday, October 6, 2007 8:23:53 AM
Subject: Re: [Ekiga-list] DTMF and Asterisk?

I have the feeling Asterisk 1.4.11 is buggy with DTMFs.

The only way to debug this is to sniff the traffic with wireshark and
check which one is wrong : ekiga or asterisk.

Le vendredi 05 octobre 2007 à 21:42 -0700, Michael a écrit :
> We use Asterisk 1-4.11 and noticed that sometimes the DTMF tones are
> delayed. Once they pass through the other party cannot hear. We have
> SIP peers shown to see the ms per phone, but they are all less then
> 200 when this happens. How can we trouble shoot this issue?
> 
> ----- Original Message ----
> From: Alan Lord <alanslists at gmail.com>
> To: Ekiga mailing list <ekiga-list at gnome.org>
> Sent: Friday, October 5, 2007 11:28:31 AM
> Subject: Re: [Ekiga-list] DTMF and Asterisk?
> 
> Damien Sandras wrote:
> > Le vendredi 05 octobre 2007 à 16:50 +0100, Alan Lord a écrit :
> >> Alan Lord wrote:
> >>> Hi all,
> >>>
> >>> I have started playing around with Asterisk recently. I got very 
> >>> confused when I couldn't get it to respond to DTMF tones from my
> Ekiga 
> >>> client. I tried loads of configuration settings on Asterisk and
> upgraded 
> >>> to their latest version 1-4.12. Same problem.
> >> <snip />
> >>
> >> Sorry about replying to my own post but I just installed the Ekiga 
> >> snapshot (20071001) and tried both RFC2833 and INFO but I still
> have the 
> >> same problem. Both the Twinkle and OpenWengo phones work fine.
> > 
> > There must be a problem on the Asterisk side in that case...
> > 
> > Don't you have debug on Asterisk's side ?
> 
> debug on what?
> 
> I can see the DTMF packets being sent from Ekiga to Asterisk but it 
> doesn't seem to recognise them.
> 
> After removing the "dtmfmode=xxxx" comment entirely, the asterisk
> server 
> now reads the dtmf tones! Setting it to RFC2833 or info didn't work.
> 
> However Ekiga still misses playing the first message sent from the 
> asterisk server. The other two soft phones do not... Any ideas?
> 
> Cheers
> 
> Alan
> 
> 
> -- 
> The way out is open!
> http://www.theopensourcerer.com
> _______________________________________________
> ekiga-list mailing list
> ekiga-list at gnome.org
> http://mail.gnome.org/mailman/listinfo/ekiga-list
> 
> 
> 
> 
> ______________________________________________________________________
> Take the Internet to Go: Yahoo!Go puts the Internet in your pocket:
> mail, news, photos & more. 
> _______________________________________________
> ekiga-list mailing list
> ekiga-list at gnome.org
> http://mail.gnome.org/mailman/listinfo/ekiga-list
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   NOVACOM         : http://www.novacom.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras at ekiga.net
                       

_______________________________________________
ekiga-list mailing list
ekiga-list at gnome.org
http://mail.gnome.org/mailman/listinfo/ekiga-list






      ____________________________________________________________________________________
Shape Yahoo! in your own image.  Join our Network Research Panel today!   http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mail.gnome.org/archives/ekiga-list/attachments/20071010/aa706318/attachment.html>