[Ekiga-list] Jitter problem with Ekiga and Openmcu

[Damien Sandras]

Le samedi 24 novembre 2007 à 13:23 -0800, Edie Morton a écrit :
> I am running Debian Etch and have problem getting openmcu to work with
> Ekiga. I have two separate desktops running with two different IP
> addresses. The unit which is running openmcu, when I try to log into a
> room I get a jitter error message. On another experiment, logging in
> with the other desktop into openmcu, a get the same jitter prompt and
> the system shuts down. Noticed that there was a recommendation to use
> a different version of Ekiga at one time, but thought with a newer
> version of ekiga, this wouldn't be a problem so I stayed with the
> version installed in debian thinking it was stable with openmcu
> packaged with Debian. Any ideas on what I can do to fix this problem..
> I've even thought that using a gatekeeper may help get rid of this
> problem. Am I on the right track with this assumption? Any help would
> be greatly appreciated.

It is probably a bug in the MCU software, you should report it on their
mailing list.
-- 
 _     Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_   NOVACOM         : http://www.novacom.be/
       FOSDEM          : http://www.fosdem.org/
       SIP Phone       : sip:dsandras at ekiga.net