[Ekiga-list] Problem receiving calls... and a solution.

[Damien Sandras]

Le mercredi 14 mars 2007 à 15:17 +0100, yannick a écrit :
> Le mercredi 14 mars 2007 à 14:42 +0100, Damien Sandras a écrit :
> > Le mercredi 14 mars 2007 à 10:29 -0300, Gustavo Maciel Dias Vieira a
> > écrit :
> > > Em Qua, 2007-03-14 às 14:24 +0100, Damien Sandras escreveu:
> > > > > > This key :
> > > > > > /apps/ekiga/general/nat/binding_timeout 
> > > > > 
> > > > > It shows the value 60 in my setup. Does it mean a packet would be
> > > > sent
> > > > > every 60 seconds? Unfortunately, that is not happening.
> > > > > 
> > > > > Anything else you want me to check?
> > > > > 
> > > > 
> > > > Unfortunately not.
> > > > 
> > > > the packet is sent here, I wonder why it is not sent in your case :-/ 
> > > 
> > > Ah, well, at least I know a work around. I'm using 2.0.5 as packaged for
> > > Fedora 6. I will monitor future versions...
> > > 
> > > One last thing, the key you mentioned above is in the NAT section of the
> > > configuration. However, my host *isn't* behind NAT, it is behind a
> > > firewall that behaves like NAT except for the address translation magic.
> > > Is it possible that Ekiga detects it is not behind NAT and decides not
> > > to send the packet?
> > 
> > Exactly !!
> > 
> > That is the reason why it doesn't send it. I had forgotten that detail.
> 
> Damien,
> should I still add "in the wiki section of the FAQ related to routers
> that on Linux udp_timeout and udp_timeout_stream need to be set to 60
> seconds or more ? "
> 

Yes, in the NAT section.

Thanks !
-- 
 _      Damien Sandras
(o-      
//\    Ekiga Softphone : http://www.ekiga.org/
v_/_  NOVACOM                 : http://www.novacom.be/
          FOSDEM                   : http://www.fosdem.org/
          SIP Phone             : sip:dsandras at ekiga.net