From dattakoli at yahoo.com Fri Jun 1 11:53:22 2007 From: dattakoli at yahoo.com (Datta Koli) Date: Fri, 1 Jun 2007 04:53:22 -0700 (PDT) Subject: [Ekiga-list] webcam & sound card on ekiga Message-ID: <449613.79359.qm@web50904.mail.re2.yahoo.com> Dear all , I am using fedora core 6 , please suggest me which webcam & soung card is properly working under fedora core 6 Regards Datta Koli --------------------------------- Food fight? Enjoy some healthy debate in the Yahoo! Answers Food & Drink Q&A. -------------- next part -------------- An HTML attachment was scrubbed... URL: From dj3pu at t-online.de Fri Jun 1 13:38:41 2007 From: dj3pu at t-online.de (Edgar Dombrowski) Date: Fri, 01 Jun 2007 15:38:41 +0200 Subject: [Ekiga-list] Ekiga with Windows98SE Message-ID: <46602161.2020803@darc.de> Bonjour Vincent. Thank you for your advice to install GTK. I did is as follows: 1. gtk+-2.6.10-20050813.exe -- install in /c:/Programme/Gemeinasme/Dateien/GTK2.0 warnings: only True Type Fonts. language: german(de) Installation succesful, pc restartet. 2. ekiga-setup-2.0.9-BETA.exe errror messages: "old version of GTH+runtime was found, wish upgrade -> yes " error installing GTK-runtime -> installation process stopped. Does this information is sufficient in order to give me more advices. Edgar from Munich From sevmek at free.fr Fri Jun 1 15:23:40 2007 From: sevmek at free.fr (yannick) Date: Fri, 01 Jun 2007 17:23:40 +0200 Subject: [Ekiga-list] webcam & sound card on ekiga In-Reply-To: <449613.79359.qm@web50904.mail.re2.yahoo.com> References: <449613.79359.qm@web50904.mail.re2.yahoo.com> Message-ID: <1180711421.6890.50.camel@achille> Le vendredi 01 juin 2007 ? 04:53 -0700, Datta Koli a ?crit : > Dear all , > > I am using fedora core 6 , please suggest me which webcam & soung card > is properly working under fedora core 6 Some hints here: http://wiki.ekiga.org/index.php/Tested_hardware > > Regards > Datta Koli > > ______________________________________________________________________ > Food fight? Enjoy some healthy debate > in the Yahoo! Answers Food & Drink Q&A. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From dsandras at seconix.com Sat Jun 2 09:15:07 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Jun 2007 11:15:07 +0200 Subject: [Ekiga-list] Ekiga with Windows98SE In-Reply-To: <46602161.2020803@darc.de> References: <46602161.2020803@darc.de> Message-ID: <1180775707.3667.5.camel@scorpion> Hi Edgar, Le vendredi 01 juin 2007 ? 15:38 +0200, Edgar Dombrowski a ?crit : > Bonjour Vincent. > > Thank you for your advice to install GTK. > I did is as follows: > > 1. gtk+-2.6.10-20050813.exe > -- install in /c:/Programme/Gemeinasme/Dateien/GTK2.0 > warnings: only True Type Fonts. > language: german(de) > > Installation succesful, pc restartet. Good. > 2. ekiga-setup-2.0.9-BETA.exe > errror messages: "old version of GTH+runtime was found, wish > upgrade -> yes > " error installing GTK-runtime -> > installation process stopped. > As explained by Vincent, the embedded GTK+ version shipping with ekiga-setup-2.0.9-BETA.exe is too new for Windows 98. It is thus required to install an older version (which you did at step 1). When the ekiga-setup program asks you if you want to upgrade GTK+, you have to answer "no", or you are back to the original problem. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pierre.dantzer at wanadoo.fr Sat Jun 2 12:42:34 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 14:42:34 +0200 Subject: [Ekiga-list] pb ekiga Message-ID: <466165BA.7090206@wanadoo.fr> Bonjour, Je suis confront? ? un probl?me de fonctionnement avec EKIGA. Au bureau, j'ai r?cemment install? avec succ?s Ekiga sur un PC DELL precision WS370, en cons?quence j'ai poursuivi l'installation ? la maison sur mon portable Dell pr?cision M20. Malheureusement, dans ce dernier cas impossible de faire fonctionner EKIGA. Ekiga a ?t? install? dans les deux cas par Synaptics. J'utilise une wemcam Logitech (046d:08ad) avec micro incorpor? pour communiquer. Vid?o et son sont reconnus. Apr?s avoir ?t? charg?, Ekiga indique que l'inscription a ?chou? : interdit. Je communique par wi-fi ? derri?re une livebox inventel. Faut-il rediriger/ouvrir des ports? L'installation me conseille de passer par le serveur STUN, ce que j'ai respect?. Vos conseils seront les bienvenus, par avance merci de prendre un peu de temps pour tenter de m'aider ? r?soudre ce probl?me. Ardent d?fenseur des logiciels libres (certes depuis peu), j'enrage de constater que SKYPE fonctionne sans probl?me! Tr?s sinc?rement Pierre Dantzer From dsandras at seconix.com Sat Jun 2 12:47:40 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Jun 2007 14:47:40 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <466165BA.7090206@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> Message-ID: <1180788460.4643.24.camel@scorpion> Bonjour, Le samedi 02 juin 2007 ? 14:42 +0200, pierre dantzer a ?crit : > Bonjour, > > Je suis confront? ? un probl?me de fonctionnement avec EKIGA. > Au bureau, j'ai r?cemment install? avec succ?s Ekiga sur un PC DELL > precision WS370, en cons?quence j'ai poursuivi l'installation ? la > maison sur mon portable Dell pr?cision M20. Malheureusement, dans ce > dernier cas impossible de faire fonctionner EKIGA. > > Ekiga a ?t? install? dans les deux cas par Synaptics. J'utilise une > wemcam Logitech (046d:08ad) avec micro incorpor? pour communiquer. > Vid?o et son sont reconnus. Apr?s avoir ?t? charg?, Ekiga indique que > l'inscription a ?chou? : interdit. > "interdit" signifie souvent un probl?me au niveau du mot de passe ou du login utilis? pour s'authentifier... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pierre.dantzer at wanadoo.fr Sat Jun 2 13:04:38 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 15:04:38 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180788460.4643.24.camel@scorpion> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> Message-ID: <46616AE6.7030407@wanadoo.fr> Damien Sandras wrote: Merci pour la rapidit? de la r?ponse. En consultant la mailing liste je me suis aper?u que j'avais oubli? de communiquer quelques informations : syst?me Linux Ubuntu version Feisty, Ekiga version 2.0.9. Je dois ?galement ajouter que j'ai repris le mot de passe et login de mon compte 'travail' en esp?rant utiliser la meme adresse sip (pierre.dantzer at ekiga.net), sachant que je n'utilise qu'un PC ? la fois. Si cela est la source d'erreur, je ne comprends pas pourquoi Ekiga refuserait ces param?tres puisqu'un seul compte reste en utilisation. N?anmoins je relance la configuration, peut ?tre une erreur de frappe? > Bonjour, > > Le samedi 02 juin 2007 ? 14:42 +0200, pierre dantzer a ?crit : > >> Bonjour, >> >> Je suis confront? ? un probl?me de fonctionnement avec EKIGA. >> Au bureau, j'ai r?cemment install? avec succ?s Ekiga sur un PC DELL >> precision WS370, en cons?quence j'ai poursuivi l'installation ? la >> maison sur mon portable Dell pr?cision M20. Malheureusement, dans ce >> dernier cas impossible de faire fonctionner EKIGA. >> >> Ekiga a ?t? install? dans les deux cas par Synaptics. J'utilise une >> wemcam Logitech (046d:08ad) avec micro incorpor? pour communiquer. >> Vid?o et son sont reconnus. Apr?s avoir ?t? charg?, Ekiga indique que >> l'inscription a ?chou? : interdit. >> >> > > "interdit" signifie souvent un probl?me au niveau du mot de passe ou du > login utilis? pour s'authentifier... > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Sat Jun 2 13:56:34 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Jun 2007 15:56:34 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46616AE6.7030407@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46616AE6.7030407@wanadoo.fr> Message-ID: <1180792594.12338.0.camel@scorpion> Le samedi 02 juin 2007 ? 15:04 +0200, pierre dantzer a ?crit : > Damien Sandras wrote: > > Merci pour la rapidit? de la r?ponse. > En consultant la mailing liste je me suis aper?u que j'avais oubli? de > communiquer quelques informations : syst?me Linux Ubuntu version > Feisty, Ekiga version 2.0.9. > Je dois ?galement ajouter que j'ai repris le mot de passe et login de > mon compte 'travail' en esp?rant utiliser la meme adresse sip > (pierre.dantzer at ekiga.net), sachant que je n'utilise qu'un PC ? la > fois. > Si cela est la source d'erreur, je ne comprends pas pourquoi Ekiga > refuserait ces param?tres puisqu'un seul compte reste en utilisation. > N?anmoins je relance la configuration, peut ?tre une erreur de frappe? Sans doute une erreur de frappe, oui... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pierre.dantzer at wanadoo.fr Sat Jun 2 14:11:14 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 16:11:14 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180788460.4643.24.camel@scorpion> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> Message-ID: <46617A82.8080102@wanadoo.fr> (suite) J'ai relanc? la configuration avec les param?tres du compte d?j? cr??. En cours de configuration, j'ai pu acc?der (sur la page 3) ? 'cr?er un compte SIP sur Ekiga.net', ouvrir avec 'mon' login et mot de passe sans probl?me. . Notons que l'adresse email fournie est celle de mon email_labo. La validation m'a donn? la meme reponse concernant l'inscription (echou?:interdit). Ce test permet d'?liminer l'erreur de frappe (pour le moment!). Notons ?galement qu'Ekiga fonctionne partiellement puisque par outils->carnet d'adresse->ekiga white page, j'ai acc?s ? la recherche d'adresse sip avec succ?s. Enfin, derni?re remarque au bureau, un coll?gue possesseur d'un Dell portable latitude, meme configuration, c'est ? dire ubuntu feisty, Ekiga 2.0.9 est confront? au meme pb : ?chou?. Au labo nous n'avons pas besoin du support STUN ? suivre... Damien Sandras wrote: > Bonjour, > sur Ekiga > Le samedi 02 juin 2007 ? 14:42 +0200, pierre dantzer a ?crit : > >> Bonjour, >> >> Je suis confront? ? un probl?me de fonctionnement avec EKIGA. >> Au bureau, j'ai r?cemment install? avec succ?s Ekiga sur un PC DELL >> precision WS370, en cons?quence j'ai poursuivi l'installation ? la >> maison sur mon portable Dell pr?cision M20. Malheureusement, dans ce >> dernier cas impossible de faire fonctionner EKIGA. >> >> Ekiga a ?t? install? dans les deux cas par Synaptics. J'utilise une >> wemcam Logitech (046d:08ad) avec micro incorpor? pour communiquer. >> Vid?o et son sont reconnus. Apr?s avoir ?t? charg?, Ekiga indique que >> l'inscription a ?chou? : interdit. >> >> > > "interdit" signifie souvent un probl?me au niveau du mot de passe ou du > login utilis? pour s'authentifier... > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Sat Jun 2 14:14:04 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Jun 2007 16:14:04 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46617A82.8080102@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> Message-ID: <1180793644.12338.2.camel@scorpion> Le samedi 02 juin 2007 ? 16:11 +0200, pierre dantzer a ?crit : > (suite) > J'ai relanc? la configuration avec les param?tres du compte d?j? cr??. > En cours de configuration, j'ai pu acc?der (sur la page 3) ? 'cr?er un > compte SIP sur Ekiga.net', ouvrir avec 'mon' login et mot de passe > sans probl?me. . Notons que l'adresse email fournie est celle de mon > email_labo. La validation m'a donn? la meme reponse concernant > l'inscription (echou?:interdit). Ce test permet d'?liminer l'erreur de > frappe (pour le moment!). Notons ?galement qu'Ekiga fonctionne > partiellement puisque par outils->carnet d'adresse->ekiga white page, > j'ai acc?s ? la recherche d'adresse sip avec succ?s. > > Enfin, derni?re remarque au bureau, un coll?gue possesseur d'un Dell > portable latitude, meme configuration, c'est ? dire ubuntu feisty, > Ekiga 2.0.9 est confront? au meme pb : ?chou?. Au labo nous n'avons > pas besoin du support STUN > Pouvez-vous uploader quelque part le r?sultat d'une sortie de debug -d 4 ? PS: il s'agit d'une mailing list en anglais :) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pierre.dantzer at wanadoo.fr Sat Jun 2 14:27:47 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 16:27:47 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180793644.12338.2.camel@scorpion> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> Message-ID: <46617E63.7070502@wanadoo.fr> Je le fais imm?diatement ? condition de m'indiquer comment acc?der ? l'information debug -d. Je suis un utilisateur 'novice' qui suit les docs pas ? pas. Pour le moment j'ai tap? sans r?sultat : sudo debug -d4 r?sultat: debug=command not found Damien Sandras wrote: > Le samedi 02 juin 2007 ? 16:11 +0200, pierre dantzer a ?crit : > >> (suite) >> J'ai relanc? la configuration avec les param?tres du compte d?j? cr??. >> En cours de configuration, j'ai pu acc?der (sur la page 3) ? 'cr?er un >> compte SIP sur Ekiga.net', ouvrir avec 'mon' login et mot de passe >> sans probl?me. . Notons que l'adresse email fournie est celle de mon >> email_labo. La validation m'a donn? la meme reponse concernant >> l'inscription (echou?:interdit). Ce test permet d'?liminer l'erreur de >> frappe (pour le moment!). Notons ?galement qu'Ekiga fonctionne >> partiellement puisque par outils->carnet d'adresse->ekiga white page, >> j'ai acc?s ? la recherche d'adresse sip avec succ?s. >> >> Enfin, derni?re remarque au bureau, un coll?gue possesseur d'un Dell >> portable latitude, meme configuration, c'est ? dire ubuntu feisty, >> Ekiga 2.0.9 est confront? au meme pb : ?chou?. Au labo nous n'avons >> pas besoin du support STUN >> >> > > Pouvez-vous uploader quelque part le r?sultat d'une sortie de debug -d > 4 ? > > PS: il s'agit d'une mailing list en anglais :) > -------------- next part -------------- An HTML attachment was scrubbed... URL: From pierre.dantzer at wanadoo.fr Sat Jun 2 14:32:54 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 16:32:54 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180793644.12338.2.camel@scorpion> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> Message-ID: <46617F96.3020405@wanadoo.fr> Sorry, i just realize that I should write in English, I'll do it next mail with the hope that mail rwill remain understandable Damien Sandras wrote: > Le samedi 02 juin 2007 ? 16:11 +0200, pierre dantzer a ?crit : > >> (suite) >> J'ai relanc? la configuration avec les param?tres du compte d?j? cr??. >> En cours de configuration, j'ai pu acc?der (sur la page 3) ? 'cr?er un >> compte SIP sur Ekiga.net', ouvrir avec 'mon' login et mot de passe >> sans probl?me. . Notons que l'adresse email fournie est celle de mon >> email_labo. La validation m'a donn? la meme reponse concernant >> l'inscription (echou?:interdit). Ce test permet d'?liminer l'erreur de >> frappe (pour le moment!). Notons ?galement qu'Ekiga fonctionne >> partiellement puisque par outils->carnet d'adresse->ekiga white page, >> j'ai acc?s ? la recherche d'adresse sip avec succ?s. >> >> Enfin, derni?re remarque au bureau, un coll?gue possesseur d'un Dell >> portable latitude, meme configuration, c'est ? dire ubuntu feisty, >> Ekiga 2.0.9 est confront? au meme pb : ?chou?. Au labo nous n'avons >> pas besoin du support STUN >> >> > > Pouvez-vous uploader quelque part le r?sultat d'une sortie de debug -d > 4 ? > > PS: il s'agit d'une mailing list en anglais :) > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sat Jun 2 14:35:09 2007 From: sevmek at free.fr (yannick) Date: Sat, 02 Jun 2007 16:35:09 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46617E63.7070502@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46617E63.7070502@wanadoo.fr> Message-ID: <1180794909.6890.54.camel@achille> Le samedi 02 juin 2007 ? 16:27 +0200, pierre dantzer a ?crit : > Je le fais imm?diatement ? condition de m'indiquer comment acc?der ? > l'information debug -d. Je suis un utilisateur 'novice' qui suit les > docs pas ? pas. http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_from_Ekiga > Pour le moment j'ai tap? sans r?sultat : > sudo debug -d4 > r?sultat: debug=command not found > > > Damien Sandras wrote: > > Le samedi 02 juin 2007 ? 16:11 +0200, pierre dantzer a ?crit : > > > > > (suite) > > > J'ai relanc? la configuration avec les param?tres du compte d?j? cr??. > > > En cours de configuration, j'ai pu acc?der (sur la page 3) ? 'cr?er un > > > compte SIP sur Ekiga.net', ouvrir avec 'mon' login et mot de passe > > > sans probl?me. . Notons que l'adresse email fournie est celle de mon > > > email_labo. La validation m'a donn? la meme reponse concernant > > > l'inscription (echou?:interdit). Ce test permet d'?liminer l'erreur de > > > frappe (pour le moment!). Notons ?galement qu'Ekiga fonctionne > > > partiellement puisque par outils->carnet d'adresse->ekiga white page, > > > j'ai acc?s ? la recherche d'adresse sip avec succ?s. > > > > > > Enfin, derni?re remarque au bureau, un coll?gue possesseur d'un Dell > > > portable latitude, meme configuration, c'est ? dire ubuntu feisty, > > > Ekiga 2.0.9 est confront? au meme pb : ?chou?. Au labo nous n'avons > > > pas besoin du support STUN > > > > > > > > > > Pouvez-vous uploader quelque part le r?sultat d'une sortie de debug -d > > 4 ? > > > > PS: il s'agit d'une mailing list en anglais :) > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From fonz at siol.net Sat Jun 2 14:45:31 2007 From: fonz at siol.net (Jure Petrovic) Date: Sat, 02 Jun 2007 16:45:31 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46617A82.8080102@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> Message-ID: <1180795531.3059.7.camel@localhost.localdomain> It might look like a network problem. What kind of router do you have at home? I know my friend had the same problem (forbidden) when he was trying to connect through some NETGEAR router. Finally, he discovered he had some firewall option enabled in router settings. Do you have the option to plug your laptop at the office or somewhere where you can be sure that ekiga works (on other computers)? Regards, Jure On Sat, 2007-06-02 at 16:11 +0200, pierre dantzer wrote: > (suite) > J'ai relanc? la configuration avec les param?tres du compte d?j? cr??. > En cours de configuration, j'ai pu acc?der (sur la page 3) ? 'cr?er un > compte SIP sur Ekiga.net', ouvrir avec 'mon' login et mot de passe > sans probl?me. . Notons que l'adresse email fournie est celle de mon > email_labo. La validation m'a donn? la meme reponse concernant > l'inscription (echou?:interdit). Ce test permet d'?liminer l'erreur de > frappe (pour le moment!). Notons ?galement qu'Ekiga fonctionne > partiellement puisque par outils->carnet d'adresse->ekiga white page, > j'ai acc?s ? la recherche d'adresse sip avec succ?s. > > Enfin, derni?re remarque au bureau, un coll?gue possesseur d'un Dell > portable latitude, meme configuration, c'est ? dire ubuntu feisty, > Ekiga 2.0.9 est confront? au meme pb : ?chou?. Au labo nous n'avons > pas besoin du support STUN > > ? suivre... > > > Damien Sandras wrote: > > Bonjour, > > sur Ekiga > > Le samedi 02 juin 2007 ? 14:42 +0200, pierre dantzer a ?crit : > > > > > Bonjour, > > > > > > Je suis confront? ? un probl?me de fonctionnement avec EKIGA. > > > Au bureau, j'ai r?cemment install? avec succ?s Ekiga sur un PC DELL > > > precision WS370, en cons?quence j'ai poursuivi l'installation ? la > > > maison sur mon portable Dell pr?cision M20. Malheureusement, dans ce > > > dernier cas impossible de faire fonctionner EKIGA. > > > > > > Ekiga a ?t? install? dans les deux cas par Synaptics. J'utilise une > > > wemcam Logitech (046d:08ad) avec micro incorpor? pour communiquer. > > > Vid?o et son sont reconnus. Apr?s avoir ?t? charg?, Ekiga indique que > > > l'inscription a ?chou? : interdit. > > > > > > > > > > "interdit" signifie souvent un probl?me au niveau du mot de passe ou du > > login utilis? pour s'authentifier... > > From fonz at siol.net Sat Jun 2 14:47:28 2007 From: fonz at siol.net (Jure Petrovic) Date: Sat, 02 Jun 2007 16:47:28 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46617E63.7070502@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46617E63.7070502@wanadoo.fr> Message-ID: <1180795648.3059.9.camel@localhost.localdomain> You can start ekiga from the command prompt (terminal window) with the command: ekiga -d 4 Regards, Jure On Sat, 2007-06-02 at 16:27 +0200, pierre dantzer wrote: > Je le fais imm?diatement ? condition de m'indiquer comment acc?der ? > l'information debug -d. Je suis un utilisateur 'novice' qui suit les > docs pas ? pas. > Pour le moment j'ai tap? sans r?sultat : > sudo debug -d4 > r?sultat: debug=command not found > From pierre.dantzer at wanadoo.fr Sat Jun 2 14:54:01 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 16:54:01 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180795648.3059.9.camel@localhost.localdomain> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46617E63.7070502@wanadoo.fr> <1180795648.3059.9.camel@localhost.localdomain> Message-ID: <46618489.5070200@wanadoo.fr> Thank you I'm doing it now. I will send an attached file. Jure Petrovic wrote: > You can start ekiga from the command prompt (terminal window) with the > command: > > ekiga -d 4 > > Regards, > Jure > > On Sat, 2007-06-02 at 16:27 +0200, pierre dantzer wrote: > >> Je le fais imm?diatement ? condition de m'indiquer comment acc?der ? >> l'information debug -d. Je suis un utilisateur 'novice' qui suit les >> docs pas ? pas. >> Pour le moment j'ai tap? sans r?sultat : >> sudo debug -d4 >> r?sultat: debug=command not found >> >> > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From pierre.dantzer at wanadoo.fr Sat Jun 2 15:08:08 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 17:08:08 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180795531.3059.7.camel@localhost.localdomain> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180795531.3059.7.camel@localhost.localdomain> Message-ID: <466187D8.2050101@wanadoo.fr> Office is at University Paris-sud. Ekiga with DEll PWS370 was fine. I just followed the instructions. My friend did the same with his laptop but it did not work. Both PC are connected via Lan. At home I'm using a DELL laptop WS M20, wi-fi, trough Livebox (furnished by the internet orange provider) (note : Skype works at home). Regards Pierre Dantzer Jure Petrovic wrote: > It might look like a network problem. What kind of router do you have > at home? > > I know my friend had the same problem (forbidden) when he was > trying to connect through some NETGEAR router. Finally, he discovered > he had some firewall option enabled in router settings. > > Do you have the option to plug your laptop at the office or somewhere > where you can be sure that ekiga works (on other computers)? > > Regards, > Jure > > > On Sat, 2007-06-02 at 16:11 +0200, pierre dantzer wrote: > >> (suite) >> J'ai relanc? la configuration avec les param?tres du compte d?j? cr??. >> En cours de configuration, j'ai pu acc?der (sur la page 3) ? 'cr?er un >> compte SIP sur Ekiga.net', ouvrir avec 'mon' login et mot de passe >> sans probl?me. . Notons que l'adresse email fournie est celle de mon >> email_labo. La validation m'a donn? la meme reponse concernant >> l'inscription (echou?:interdit). Ce test permet d'?liminer l'erreur de >> frappe (pour le moment!). Notons ?galement qu'Ekiga fonctionne >> partiellement puisque par outils->carnet d'adresse->ekiga white page, >> j'ai acc?s ? la recherche d'adresse sip avec succ?s. >> >> Enfin, derni?re remarque au bureau, un coll?gue possesseur d'un Dell >> portable latitude, meme configuration, c'est ? dire ubuntu feisty, >> Ekiga 2.0.9 est confront? au meme pb : ?chou?. Au labo nous n'avons >> pas besoin du support STUN >> >> ? suivre... >> >> >> Damien Sandras wrote: >> >>> Bonjour, >>> sur Ekiga >>> Le samedi 02 juin 2007 ? 14:42 +0200, pierre dantzer a ?crit : >>> >>> >>>> Bonjour, >>>> >>>> Je suis confront? ? un probl?me de fonctionnement avec EKIGA. >>>> Au bureau, j'ai r?cemment install? avec succ?s Ekiga sur un PC DELL >>>> precision WS370, en cons?quence j'ai poursuivi l'installation ? la >>>> maison sur mon portable Dell pr?cision M20. Malheureusement, dans ce >>>> dernier cas impossible de faire fonctionner EKIGA. >>>> >>>> Ekiga a ?t? install? dans les deux cas par Synaptics. J'utilise une >>>> wemcam Logitech (046d:08ad) avec micro incorpor? pour communiquer. >>>> Vid?o et son sont reconnus. Apr?s avoir ?t? charg?, Ekiga indique que >>>> l'inscription a ?chou? : interdit. >>>> >>>> >>>> >>> "interdit" signifie souvent un probl?me au niveau du mot de passe ou du >>> login utilis? pour s'authentifier... >>> >>> > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Sat Jun 2 15:26:52 2007 From: jpuydt at free.fr (Julien Puydt) Date: Sat, 02 Jun 2007 17:26:52 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <466187D8.2050101@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180795531.3059.7.camel@localhost.localdomain> <466187D8.2050101@wanadoo.fr> Message-ID: <46618C3C.1040305@free.fr> pierre dantzer wrote: > (note : Skype works at home). Note: skype has both: 1) big servers out there 2) and leech their users to help you go in/out firewalls... ekiga doesn't. Snark on #ekiga From pierre.dantzer at wanadoo.fr Sat Jun 2 15:22:46 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 17:22:46 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180793644.12338.2.camel@scorpion> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> Message-ID: <46618B46.7030304@wanadoo.fr> I did follow the instructions (ekiga -d 4). I hope that the attached file will provide you with 'meaningful' informations. name of the file : output.txt sinceraly Damien Sandras wrote: > Le samedi 02 juin 2007 ? 16:11 +0200, pierre dantzer a ?crit : > >> (suite) >> J'ai relanc? la configuration avec les param?tres du compte d?j? cr??. >> En cours de configuration, j'ai pu acc?der (sur la page 3) ? 'cr?er un >> compte SIP sur Ekiga.net', ouvrir avec 'mon' login et mot de passe >> sans probl?me. . Notons que l'adresse email fournie est celle de mon >> email_labo. La validation m'a donn? la meme reponse concernant >> l'inscription (echou?:interdit). Ce test permet d'?liminer l'erreur de >> frappe (pour le moment!). Notons ?galement qu'Ekiga fonctionne >> partiellement puisque par outils->carnet d'adresse->ekiga white page, >> j'ai acc?s ? la recherche d'adresse sip avec succ?s. >> >> Enfin, derni?re remarque au bureau, un coll?gue possesseur d'un Dell >> portable latitude, meme configuration, c'est ? dire ubuntu feisty, >> Ekiga 2.0.9 est confront? au meme pb : ?chou?. Au labo nous n'avons >> pas besoin du support STUN >> >> > > Pouvez-vous uploader quelque part le r?sultat d'une sortie de debug -d > 4 ? > > PS: il s'agit d'une mailing list en anglais :) > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: output.txt URL: From dsandras at seconix.com Sat Jun 2 15:23:31 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Jun 2007 17:23:31 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <466187D8.2050101@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180795531.3059.7.camel@localhost.localdomain> <466187D8.2050101@wanadoo.fr> Message-ID: <1180797811.20693.3.camel@scorpion> Le samedi 02 juin 2007 ? 17:08 +0200, pierre dantzer a ?crit : > Office is at University Paris-sud. Ekiga with DEll PWS370 was fine. I > just followed the instructions. > My friend did the same with his laptop but it did not work. Both PC > are connected via Lan. > At home I'm using a DELL laptop WS M20, wi-fi, trough Livebox > (furnished by the internet orange provider) > (note : Skype works at home). > Without a -d 4 output, there is not much we can tell. And repeating that Skype works does not help either. Skype has been created from the start with a new protocol in order to cross NAT routers without trouble. That was not the case for SIP or H.323 or even Jingle. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sat Jun 2 15:25:55 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Jun 2007 17:25:55 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46618B46.7030304@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> Message-ID: <1180797955.20693.5.camel@scorpion> Le samedi 02 juin 2007 ? 17:22 +0200, pierre dantzer a ?crit : > I did follow the instructions (ekiga -d 4). I hope that the attached > file will provide you with 'meaningful' informations. > name of the file : output.txt > Unfortunately, it just confirms your login / pass is wrong. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pierre.dantzer at wanadoo.fr Sat Jun 2 15:40:22 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 17:40:22 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180797811.20693.3.camel@scorpion> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180795531.3059.7.camel@localhost.localdomain> <466187D8.2050101@wanadoo.fr> <1180797811.20693.3.camel@scorpion> Message-ID: <46618F66.5010401@wanadoo.fr> Sorry for that type of stupid reference to S... . I really did not use it to make advertisement, but knowing that you know better than I do, I honestly thought that it was of some help for you, since you know how the systems work. I just have a wish to get out with S... as soon as possible. It's already done at lab. I truly and sincerely appreciate all your contributions/work to the development of Ekiga. Regards Damien Sandras wrote: > Le samedi 02 juin 2007 ? 17:08 +0200, pierre dantzer a ?crit : > >> Office is at University Paris-sud. Ekiga with DEll PWS370 was fine. I >> just followed the instructions. >> My friend did the same with his laptop but it did not work. Both PC >> are connected via Lan. >> At home I'm using a DELL laptop WS M20, wi-fi, trough Livebox >> (furnished by the internet orange provider) >> (note : Skype works at home). >> >> > > Without a -d 4 output, there is not much we can tell. > And repeating that Skype works does not help either. Skype has been > created from the start with a new protocol in order to cross NAT routers > without trouble. That was not the case for SIP or H.323 or even Jingle. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From pierre.dantzer at wanadoo.fr Sat Jun 2 15:49:10 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 17:49:10 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180797955.20693.5.camel@scorpion> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> <1180797955.20693.5.camel@scorpion> Message-ID: <46619176.7080406@wanadoo.fr> What a fast answer. I wish I could analyse the file so quickly. Then I must understand : I have tried Ekiga some time ago, with the former version 2.0.3. (may be with edgy). I decided to comeback with the new version. Does it mean that the former configuration was kept in memory, in some place? In that case how to recover the former login/pass, how to remake an initialisation? many thanks Damien Sandras wrote: > Le samedi 02 juin 2007 ? 17:22 +0200, pierre dantzer a ?crit : > >> I did follow the instructions (ekiga -d 4). I hope that the attached >> file will provide you with 'meaningful' informations. >> name of the file : output.txt >> >> > > Unfortunately, it just confirms your login / pass is wrong. > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Sat Jun 2 16:31:02 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Jun 2007 18:31:02 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46619176.7080406@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> <1180797955.20693.5.camel@scorpion> <46619176.7080406@wanadoo.fr> Message-ID: <1180801862.20693.10.camel@scorpion> Le samedi 02 juin 2007 ? 17:49 +0200, pierre dantzer a ?crit : > What a fast answer. I wish I could analyse the file so quickly. You can see this : -> REGISTER <- 401 -> REGISTER (authenticated) <- 401 The server sends a second 401 after the authenticated REGISTER. This can only be possible for 2 reasons : - a bug in ekiga - a bug in the server - something wrong with the login / password If there was a bug in ekiga or in the server, I suspect you would not be the only one to complain about it, so I really think there is a problem with the login/pass. But as Jure explained, it is possible that some router in between is rewriting the SIP packets, leading to the failure. > Then I must understand : > I have tried Ekiga some time ago, with the former version 2.0.3. (may > be with edgy). I decided to comeback with the new version. Does it > mean that the former configuration was kept in memory, in some place? Yes. > In that case how to recover the former login/pass, how to remake an > initialisation? > I think you can do : stop ekiga ekiga-config-tool --clean killall gconfd-2 start ekiga Hope it helps... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sat Jun 2 16:31:13 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Jun 2007 18:31:13 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46618F66.5010401@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180795531.3059.7.camel@localhost.localdomain> <466187D8.2050101@wanadoo.fr> <1180797811.20693.3.camel@scorpion> <46618F66.5010401@wanadoo.fr> Message-ID: <1180801873.20693.12.camel@scorpion> Le samedi 02 juin 2007 ? 17:40 +0200, pierre dantzer a ?crit : > Sorry for that type of stupid reference to S... . I really did not use > it to make advertisement, but knowing that you know better than I do, > I honestly thought that it was of some help for you, since you know > how the systems work. I just have a wish to get out with S... as soon > as possible. It's already done at lab. > I truly and sincerely appreciate all your contributions/work to the > development of Ekiga. > Don't worry :) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pierre.dantzer at wanadoo.fr Sat Jun 2 18:30:00 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sat, 02 Jun 2007 20:30:00 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180801862.20693.10.camel@scorpion> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> <1180797955.20693.5.camel@scorpion> <46619176.7080406@wanadoo.fr> <1180801862.20693.10.camel@scorpion> Message-ID: <4661B728.3090509@wanadoo.fr> I will follow yours advices and let you know about the results, many thanks for your help Damien Sandras wrote: > Le samedi 02 juin 2007 ? 17:49 +0200, pierre dantzer a ?crit : > >> What a fast answer. I wish I could analyse the file so quickly. >> > > You can see this : > -> REGISTER > <- 401 > -> REGISTER (authenticated) > <- 401 > > The server sends a second 401 after the authenticated REGISTER. This can > only be possible for 2 reasons : > - a bug in ekiga > - a bug in the server > - something wrong with the login / password > > If there was a bug in ekiga or in the server, I suspect you would not be > the only one to complain about it, so I really think there is a problem > with the login/pass. > > But as Jure explained, it is possible that some router in between is > rewriting the SIP packets, leading to the failure. > > >> Then I must understand : >> I have tried Ekiga some time ago, with the former version 2.0.3. (may >> be with edgy). I decided to comeback with the new version. Does it >> mean that the former configuration was kept in memory, in some place? >> > > Yes. > > >> In that case how to recover the former login/pass, how to remake an >> initialisation? >> >> > > I think you can do : > stop ekiga > ekiga-config-tool --clean > killall gconfd-2 > start ekiga > > Hope it helps... > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dj3pu at t-online.de Sun Jun 3 08:20:08 2007 From: dj3pu at t-online.de (Edgar Dombrowski) Date: Sun, 03 Jun 2007 08:20:08 -0000 Subject: [Ekiga-list] e: Ekiga with Windows98SE (Damien Sandras) Message-ID: <46399B28.4070305@darc.de> Hallo, Damien. Thank you for your advice, but the program still doesn't work. Having said "no update" the installation of "ekika" proceeds normally. However when trying to open the program, I get the following error messages: " exiga.exe is linked to the the following 'export-lingtk-win32-2.0-0.dll: gtk_windowsset-urgency-hint' and ' an equipment connected to ekiga does not work" Do you have any solution? Edgar from Munich From pierre.dantzer at wanadoo.fr Sun Jun 3 11:00:20 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sun, 03 Jun 2007 13:00:20 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <4661B728.3090509@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> <1180797955.20693.5.camel@scorpion> <46619176.7080406@wanadoo.fr> <1180801862.20693.10.camel@scorpion> <4661B728.3090509@wanadoo.fr> Message-ID: <46629F44.8010007@wanadoo.fr> Hello, Last mail related to this Dell laptop, Ekiga is connected and is working since this morning 1am! Many thanks, without your help, i was going to wait the following version. I did as you wrote : 1. ekiga-config-tool --clean 2. killall gconfd-2 3. I had to re-boot 4. it was OK Conclusions/questions/suggestions 1. I did follow the route given by Ubuntu doc to load Ekiga 2.0.9 2. some time ago, Ekiga ver 2.0.3 was installed on this laptop without success, I gave up waiting for Feisty and installed the last Ekiga version with synamtic. 3. I did run a 'new' configuration for this 'new' version. It did not work. May I conclude that the 'old' configuration was still present (login was changed moving from the old to the new config). 4. support from ekiga provided the solution. 5. In terminal mode : ekiga debug -d > output.txt (gives all the informations for the experts) 6. solutions : see above 7. May I say that uninstalling Ekiga did not remove the old config. (this might happen for other applications and create the same pb?) 8. It might be a good thing to point out that possible config problem in the doc related to Ekiga (Ubuntu)? Now, I just have to convince more people to use Ekiga. Good work and thank's again, Sinceraly pierre dantzer wrote: > I will follow yours advices and let you know about the results, > > many thanks for your help > > > Damien Sandras wrote: >> Le samedi 02 juin 2007 ? 17:49 +0200, pierre dantzer a ?crit : >> >>> What a fast answer. I wish I could analyse the file so quickly. >>> >> >> You can see this : >> -> REGISTER >> <- 401 >> -> REGISTER (authenticated) >> <- 401 >> >> The server sends a second 401 after the authenticated REGISTER. This can >> only be possible for 2 reasons : >> - a bug in ekiga >> - a bug in the server >> - something wrong with the login / password >> >> If there was a bug in ekiga or in the server, I suspect you would not be >> the only one to complain about it, so I really think there is a problem >> with the login/pass. >> >> But as Jure explained, it is possible that some router in between is >> rewriting the SIP packets, leading to the failure. >> >> >>> Then I must understand : >>> I have tried Ekiga some time ago, with the former version 2.0.3. (may >>> be with edgy). I decided to comeback with the new version. Does it >>> mean that the former configuration was kept in memory, in some place? >>> >> >> Yes. >> >> >>> In that case how to recover the former login/pass, how to remake an >>> initialisation? >>> >>> >> >> I think you can do : >> stop ekiga >> ekiga-config-tool --clean >> killall gconfd-2 >> start ekiga >> >> Hope it helps... >> > > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sun Jun 3 11:11:36 2007 From: sevmek at free.fr (yannick) Date: Sun, 03 Jun 2007 13:11:36 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <46629F44.8010007@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> <1180797955.20693.5.camel@scorpion> <46619176.7080406@wanadoo.fr> <1180801862.20693.10.camel@scorpion> <4661B728.3090509@wanadoo.fr> <46629F44.8010007@wanadoo.fr> Message-ID: <1180869097.6890.59.camel@achille> Le dimanche 03 juin 2007 ? 13:00 +0200, pierre dantzer a ?crit : > 8. It might be a good thing to point out that possible config problem in the doc related to Ekiga (Ubuntu)? > Done. http://doc.ubuntu-fr.org/ekiga#l_inscription_a_echoue_interdit Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From pierre.dantzer at wanadoo.fr Sun Jun 3 11:31:48 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sun, 03 Jun 2007 13:31:48 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180869097.6890.59.camel@achille> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> <1180797955.20693.5.camel@scorpion> <46619176.7080406@wanadoo.fr> <1180801862.20693.10.camel@scorpion> <4661B728.3090509@wanadoo.fr> <46629F44.8010007@wanadoo.fr> <1180869097.6890.59.camel@achille> Message-ID: <4662A6A4.80508@wanadoo.fr> Next time, I better read more carrefully the excellent Ekiga Ubuntu doc and ... shut my mouth. sinceraly - Pierre yannick wrote: > Le dimanche 03 juin 2007 ? 13:00 +0200, pierre dantzer a ?crit : > >> 8. It might be a good thing to point out that possible config problem in the doc related to Ekiga (Ubuntu)? >> >> > Done. > http://doc.ubuntu-fr.org/ekiga#l_inscription_a_echoue_interdit > > Regards, > Yannick > -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sun Jun 3 11:35:01 2007 From: sevmek at free.fr (yannick) Date: Sun, 03 Jun 2007 13:35:01 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <4662A6A4.80508@wanadoo.fr> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> <1180797955.20693.5.camel@scorpion> <46619176.7080406@wanadoo.fr> <1180801862.20693.10.camel@scorpion> <4661B728.3090509@wanadoo.fr> <46629F44.8010007@wanadoo.fr> <1180869097.6890.59.camel@achille> <4662A6A4.80508@wanadoo.fr> Message-ID: <1180870501.6890.61.camel@achille> Le dimanche 03 juin 2007 ? 13:31 +0200, pierre dantzer a ?crit : > Next time, I better read more carrefully the excellent Ekiga Ubuntu > doc and ... shut my mouth. > No, I just updated the documentation after you tried the solution. I wrote it on *your* request. Regards, Yannick > sinceraly - Pierre > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From pierre.dantzer at wanadoo.fr Sun Jun 3 11:45:50 2007 From: pierre.dantzer at wanadoo.fr (pierre dantzer) Date: Sun, 03 Jun 2007 13:45:50 +0200 Subject: [Ekiga-list] pb ekiga In-Reply-To: <1180870501.6890.61.camel@achille> References: <466165BA.7090206@wanadoo.fr> <1180788460.4643.24.camel@scorpion> <46617A82.8080102@wanadoo.fr> <1180793644.12338.2.camel@scorpion> <46618B46.7030304@wanadoo.fr> <1180797955.20693.5.camel@scorpion> <46619176.7080406@wanadoo.fr> <1180801862.20693.10.camel@scorpion> <4661B728.3090509@wanadoo.fr> <46629F44.8010007@wanadoo.fr> <1180869097.6890.59.camel@achille> <4662A6A4.80508@wanadoo.fr> <1180870501.6890.61.camel@achille> Message-ID: <4662A9EE.80300@wanadoo.fr> OK, then thank you, hoping that it will be useful for other ekiga's users, Regards - Pierre yannick wrote: > Le dimanche 03 juin 2007 ? 13:31 +0200, pierre dantzer a ?crit : > >> Next time, I better read more carrefully the excellent Ekiga Ubuntu >> doc and ... shut my mouth. >> >> > > No, I just updated the documentation after you tried the solution. > I wrote it on *your* request. > > Regards, > Yannick > > >> sinceraly - Pierre >> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Sun Jun 3 15:15:24 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Sun, 3 Jun 2007 17:15:24 +0200 Subject: [Ekiga-list] VOICE MAIL service with Asterisks (I've currently choosen to use GIZMO) In-Reply-To: <1159287353.3796.9.camel@golgoth01> References: <451732A4.6040805@ncf.ca> <1159197431.3843.56.camel@golgoth01> <20060926014544.GB7332@mungewell.org> <1159287353.3796.9.camel@golgoth01> Message-ID: Hi all, I have currently the same setup, I give people my long gizmo sip address because of the Voicemail service, but it's really unusable, if toto at ekiga.net leave a voicemail on a gizmo user , he receives an email saying " toto has left you a voicemail , call toto with your gizmo etc.." ... So you don't even know who has called you .... So I'm looking for a SIp voicemail service that I could advice to other people 2006/9/26, Damien Sandras : > > Le lundi 25 septembre 2006 ? 19:45 -0600, simon a ?crit : > > Hi Damien, > > Did you consider the 'email voicemail' setup, where the system records > > the message and then emails it as a sound file to the user. > that's an option to consider, indeed.... > Good idea for 3.00! But With the new platform provided by easyneuf.fr , is it not possible to dedicate Few Go to voicemails ? At least forwarding messages on emails would be enough I guess , we can transcode to speex , or even let people leave video voicemail ? That would ba a killing features ... -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at proxy01.sipphone.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Jun 4 11:47:04 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 04 Jun 2007 13:47:04 +0200 Subject: [Ekiga-list] e: Ekiga with Windows98SE (Damien Sandras) In-Reply-To: <46399B28.4070305@darc.de> References: <46399B28.4070305@darc.de> Message-ID: <1180957624.3753.44.camel@scorpion> Le jeudi 03 mai 2007 ? 10:19 +0200, Edgar Dombrowski a ?crit : > Hallo, Damien. > > Thank you for your advice, but the program still doesn't work. > > Having said "no update" the installation of "ekika" proceeds normally. > However when trying to open the program, I get the following error messages: > > " exiga.exe is linked to the the following > 'export-lingtk-win32-2.0-0.dll: gtk_windowsset-urgency-hint' > and > ' an equipment connected to ekiga does not work" > > Do you have any solution? > Apparently Ekiga requires a newer version of GTK+, but newer versions of GTK+ do not work anymore on WIN32. There are 2 solutions : - upgrade to a more recent WINDOWS than Windows 98 (it is 10 years old now) - recompile Ekiga with the older GTK+ version and remove the call to gtk_windowsset-urgency-hint... The second solution is the most difficult unfortunately :( -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Tue Jun 5 11:11:47 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Tue, 05 Jun 2007 13:11:47 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. Message-ID: <87k5uiveoc.fsf@gigli.quasi.internal> Hi guys I'm currently testing Ekiga/SIP as packaged with Debian Etch behind a netfilter NAT/PAT firewalling router, which runs Debian Etch either. Yesterday, I also installed siproxd on the router and configured Ekiga to use it as an outbound proxy (nat traversal method: none). While Ekiga registers with the proxy alright, I don't seem to be able to make outbound calls though. For comparision purposes, I tried Twinkle in the very same setup and it works OK. So before running into a protocol/network level debug fest, may I ask whether is this a known (interoperability) issue? Any advice on how this could be fixed without upgrading to latest versions of either software? Thanks very much, B. From dsandras at seconix.com Tue Jun 5 11:19:06 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Jun 2007 13:19:06 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87k5uiveoc.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> Message-ID: <1181042346.5423.21.camel@scorpion> Le mardi 05 juin 2007 ? 13:11 +0200, Bruno Hertz a ?crit : > Hi guys > > I'm currently testing Ekiga/SIP as packaged with Debian Etch behind a > netfilter NAT/PAT firewalling router, which runs Debian Etch either. > > Yesterday, I also installed siproxd on the router and configured > Ekiga to use it as an outbound proxy (nat traversal method: none). > > While Ekiga registers with the proxy alright, I don't seem to be able > to make outbound calls though. For comparision purposes, I tried > Twinkle in the very same setup and it works OK. > > So before running into a protocol/network level debug fest, may I ask > whether is this a known (interoperability) issue? Any advice on how > this could be fixed without upgrading to latest versions of either > software? > Is it Ekiga 2.0.9 ? If so, there should not be any interoperability problem. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Tue Jun 5 11:25:41 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Tue, 05 Jun 2007 13:25:41 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181042346.5423.21.camel@scorpion> (Damien Sandras's message of "Tue, 05 Jun 2007 13:19:06 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> Message-ID: <87d50ave16.fsf@gigli.quasi.internal> Damien Sandras writes: > Is it Ekiga 2.0.9 ? Nope. It's 2.0.3 which got packaged with current Debian stable. I take it then you recommend an upgrade? Kind regards, B. From dsandras at seconix.com Tue Jun 5 11:34:39 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Jun 2007 13:34:39 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87d50ave16.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> Message-ID: <1181043279.5423.31.camel@scorpion> Le mardi 05 juin 2007 ? 13:25 +0200, Bruno Hertz a ?crit : > Damien Sandras writes: > > > Is it Ekiga 2.0.9 ? > > Nope. It's 2.0.3 which got packaged with current Debian stable. I take > it then you recommend an upgrade? > Sure, Ekiga 2.0.3 is an antiquity. There were 6 releases since Ekiga 2.0.3, all of them with interoperability fixes. I would even suggest you using the CVS snapshots : http://snapshots.seconix.com (they contain even more fixes which will be released as Ekiga 2.0.10 soon). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Tue Jun 5 11:45:02 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Tue, 05 Jun 2007 13:45:02 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181043279.5423.31.camel@scorpion> (Damien Sandras's message of "Tue, 05 Jun 2007 13:34:39 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> Message-ID: <878xayvd4x.fsf@gigli.quasi.internal> Damien Sandras writes: > I would even suggest you using the CVS snapshots : > http://snapshots.seconix.com Hey, seems there are even Debian repositories up there. Would it be OK to use http://snapshots.ekiga.net/debian/ ? That'd really be great ... Kind regards, Bruno. From dsandras at seconix.com Tue Jun 5 12:17:45 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Jun 2007 14:17:45 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <878xayvd4x.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> Message-ID: <1181045865.5423.35.camel@scorpion> Le mardi 05 juin 2007 ? 13:45 +0200, Bruno Hertz a ?crit : > Damien Sandras writes: > > > I would even suggest you using the CVS snapshots : > > http://snapshots.seconix.com > > Hey, seems there are even Debian repositories up there. Would it be OK > to use http://snapshots.ekiga.net/debian/ ? That'd really be great ... > Could be done yes. But I do not manage that part of the server even if it is "mine". -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Tue Jun 5 12:34:35 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Tue, 05 Jun 2007 14:34:35 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181045865.5423.35.camel@scorpion> (Damien Sandras's message of "Tue, 05 Jun 2007 14:17:45 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> Message-ID: <874plmvauc.fsf@gigli.quasi.internal> Damien Sandras writes: > Could be done yes. But I do not manage that part of the server even if > it is "mine". Understood. I already pulled those snapshot packages though but unfortunately it comes out all the same, outbound calls not working. I'll stop at this point because right now I just can't go through the process of installing ekiga from source. It might as well be a siproxd issue either which twinkle just happens to ignore but ekiga stumbles upon. Who knows. Anyway, thanks a lot for your excellent support. I'll drop a note if I make any progress on this in the future. Kind regards, Bruno. From dsandras at seconix.com Tue Jun 5 12:39:48 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Jun 2007 14:39:48 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <874plmvauc.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> Message-ID: <1181047188.5423.39.camel@scorpion> Le mardi 05 juin 2007 ? 14:34 +0200, Bruno Hertz a ?crit : > Damien Sandras writes: > > > Could be done yes. But I do not manage that part of the server even if > > it is "mine". > > Understood. I already pulled those snapshot packages though but > unfortunately it comes out all the same, outbound calls not working. > > I'll stop at this point because right now I just can't go through the > process of installing ekiga from source. It might as well be a siproxd > issue either which twinkle just happens to ignore but ekiga stumbles > upon. Who knows. > > Anyway, thanks a lot for your excellent support. I'll drop a note if I > make any progress on this in the future. > You should report the problem to the sipproxd developers. Enjoy Twinkle ;) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Tue Jun 5 12:57:58 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Tue, 05 Jun 2007 14:57:58 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181047188.5423.39.camel@scorpion> (Damien Sandras's message of "Tue, 05 Jun 2007 14:39:48 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> Message-ID: <87zm3etv6x.fsf@gigli.quasi.internal> Damien Sandras writes: > You should report the problem to the sipproxd developers. Yeah, but since twinkle works alright I guess it'll need at least some network level debugging and pinpointing before they might take some action. Anyway, I'll look into this and try to narrow the issue down. > Enjoy Twinkle ;) Please don't say that. I'd really like to use Ekiga, and will certainly do at some point. Was just hoping that maybe I was lucky and could short cut the whole troubleshooting procedure. Thanks a lot, Bruno. From dsandras at seconix.com Tue Jun 5 13:08:18 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Jun 2007 15:08:18 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87zm3etv6x.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> Message-ID: <1181048898.5423.41.camel@scorpion> Le mardi 05 juin 2007 ? 14:57 +0200, Bruno Hertz a ?crit : > Damien Sandras writes: > > > You should report the problem to the sipproxd developers. > > Yeah, but since twinkle works alright I guess it'll need at least some > network level debugging and pinpointing before they might take some > action. Anyway, I'll look into this and try to narrow the issue down. > What I suggest is that you mail me privately the output of : ekiga -d 4 > output.txt 2>&1 Perhaps it is something stupid :) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Tue Jun 5 16:02:50 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Tue, 05 Jun 2007 18:02:50 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181048898.5423.41.camel@scorpion> (Damien Sandras's message of "Tue, 05 Jun 2007 15:08:18 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> Message-ID: <87lkeytmmt.fsf@gigli.quasi.internal> Damien Sandras writes: > Perhaps it is something stupid :) OK, I've managed do install tshark on my router and got me captures of both, Ekiga and Twinkle sessions. Preliminary question: when a SIP phone registers an account, and a SIP outbound proxy is specified, should the register request packet be sent directly to the registrar, or should it also go through the proxy ?? Kind regards, Bruno. From dsandras at seconix.com Tue Jun 5 16:46:14 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Jun 2007 18:46:14 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87lkeytmmt.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181042346.5423.21.camel@scorpion> <87d50ave16.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> Message-ID: <1181061974.5423.120.camel@scorpion> Le mardi 05 juin 2007 ? 18:02 +0200, Bruno Hertz a ?crit : > Damien Sandras writes: > > > Perhaps it is something stupid :) > > OK, I've managed do install tshark on my router and got me captures of > both, Ekiga and Twinkle sessions. > > Preliminary question: when a SIP phone registers an account, and a SIP > outbound proxy is specified, should the register request packet be > sent directly to the registrar, or should it also go through the proxy > ?? > *All* packets should go through the outbound proxy. I think I know why Ekiga fails in your case (I'll send you a private explanation ASAP). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pocm at soton.ac.uk Tue Jun 5 17:16:03 2007 From: pocm at soton.ac.uk (Paulo J. Matos) Date: Tue, 5 Jun 2007 18:16:03 +0100 Subject: [Ekiga-list] Sane people at skype Message-ID: <11b141710706051016m1828b506r3eebcb2cdde46e89@mail.gmail.com> Finally some sane people at skype. Skype staff recommends Ekiga (2nd post): http://forum.skype.com/index.php?showtopic=86418 I'm expecting, at any moment, a press announcement from Bill Gates recommending Linux. :-) -- Paulo Jorge Matos - pocm at soton.ac.uk http://www.personal.soton.ac.uk/pocm PhD Student @ ECS University of Southampton, UK From michel.memeteau at gmail.com Tue Jun 5 17:26:44 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Tue, 5 Jun 2007 19:26:44 +0200 Subject: [Ekiga-list] Sane people at skype In-Reply-To: <11b141710706051016m1828b506r3eebcb2cdde46e89@mail.gmail.com> References: <11b141710706051016m1828b506r3eebcb2cdde46e89@mail.gmail.com> Message-ID: Funny I just replied ... :-) 2007/6/5, Paulo J. Matos : > > Finally some sane people at skype. Skype staff recommends Ekiga (2nd > post): > http://forum.skype.com/index.php?showtopic=86418 > > I'm expecting, at any moment, a press announcement from Bill Gates > recommending Linux. :-) > > -- > Paulo Jorge Matos - pocm at soton.ac.uk > http://www.personal.soton.ac.uk/pocm > PhD Student @ ECS > University of Southampton, UK > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at proxy01.sipphone.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From bbagger at gmail.com Tue Jun 5 18:08:17 2007 From: bbagger at gmail.com (Bent Bagger) Date: Tue, 5 Jun 2007 20:08:17 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181061974.5423.120.camel@scorpion> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> Message-ID: <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> > > I think I know why Ekiga fails in your case (I'll send you a private > explanation ASAP). Reinvite? Bent ;-) From dsandras at seconix.com Tue Jun 5 18:38:41 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Jun 2007 20:38:41 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> Message-ID: <1181068721.4535.7.camel@scorpion> Le mardi 05 juin 2007 ? 20:08 +0200, Bent Bagger a ?crit : > > > > I think I know why Ekiga fails in your case (I'll send you a private > > explanation ASAP). > > Reinvite? > I don't think so. I think sipproxd does not relay the message, no idea why ;) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From rjob at gulftel.com Wed Jun 6 21:49:14 2007 From: rjob at gulftel.com (bob olbrich) Date: Wed, 06 Jun 2007 16:49:14 -0500 Subject: [Ekiga-list] Win32 Ekiga 2.0.9-BETA connection problems (repost with log) In-Reply-To: <465E62FB.2080602@colombus.org> References: <465E036D.2020605@gulftel.com> <465E62FB.2080602@colombus.org> Message-ID: <46672BDA.9000704@gulftel.com> Hello again, I tried all three combinations (PCMA,PCMU,PCMA&PCMU) No change in the results - still no connection. ( I tried posting all three log files initially, but the message was bounced as it exceeded 40KB. If anyone wants to see them please tell me what section to post so it won't get bounced again) Vincent Luba wrote: >bob olbrich a ?crit : > > >>Here's the repost with the attached stderr.txt file: >> >> >> >[...] > >It is strange that REGISTER and SUBSCRIBE transaction goes fine, while >INVITE transaction times out. This might be a problem with the message >length. > >Try again after you have disabled all the codecs except PCMA and/or PCMU. >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Wed Jun 6 22:11:35 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 07 Jun 2007 00:11:35 +0200 Subject: [Ekiga-list] Win32 Ekiga 2.0.9-BETA connection problems (repost with log) In-Reply-To: <46672BDA.9000704@gulftel.com> References: <465E036D.2020605@gulftel.com> <465E62FB.2080602@colombus.org> <46672BDA.9000704@gulftel.com> Message-ID: <1181167895.6469.1.camel@scorpion> Hi, Le mercredi 06 juin 2007 ? 16:49 -0500, bob olbrich a ?crit : > Hello again, > > I tried all three combinations (PCMA,PCMU,PCMA&PCMU) > No change in the results - still no connection. > ( I tried posting all three log files initially, but the message > was bounced as it exceeded 40KB. If anyone wants to see them > please tell me what section to post so it won't get bounced > again) Just post one of them, for example the one with only PCMA enabled. Of course, the ideal is to upload its content somewhere like pastebin.ca. There are too many subscribers on this list to allow attachments to be sent to everyone... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From rshepard at appl-ecosys.com Thu Jun 7 00:22:49 2007 From: rshepard at appl-ecosys.com (Rich Shepard) Date: Wed, 6 Jun 2007 17:22:49 -0700 (PDT) Subject: [Ekiga-list] Installing Video Device (Web Cam) Message-ID: I have successfully installed PWlib-1.10.7, opal-2.2.8, and ekiga-2.0.9. The configuration went just fine until the last step: setting up the video. There's a Logitech web cam attached via a USB port: [root at salmo ~]# lsusb Bus 003 Device 001: ID 0000:0000 Bus 002 Device 003: ID 046d:08ad Logitech, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 008: ID 046d:0a02 Logitech, Inc. Bus 001 Device 007: ID 03f0:0401 Hewlett-Packard ScanJet 5200c Bus 001 Device 001: ID 0000:0000 It's Bus 2, Device 3. Ekiga found the headphone/mike (Bus 1, Device 8) just fine, but not the video device. The configuration tool reported 'no device found.' Does someone have a suggestion how I should proceed? TIA, Rich -- Richard B. Shepard, Ph.D. | The Environmental Permitting Applied Ecosystem Services, Inc. | Accelerator(TM) Voice: 503-667-4517 Fax: 503-667-8863 From brrhtz at yahoo.de Thu Jun 7 14:37:49 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Thu, 07 Jun 2007 16:37:49 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181068721.4535.7.camel@scorpion> (Damien Sandras's message of "Tue, 05 Jun 2007 20:38:41 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> Message-ID: <87r6on96f6.fsf@gigli.quasi.internal> Damien Sandras writes: > Le mardi 05 juin 2007 ? 20:08 +0200, Bent Bagger a ?crit : >> > >> > I think I know why Ekiga fails in your case (I'll send you a private >> > explanation ASAP). >> >> Reinvite? >> > > I don't think so. I think sipproxd does not relay the message, no idea > why ;) Perfectly right. You guessed that from those missing TRYINGs, I presume ;) Anyway, here a short update for you, in case you're interested: (1) The issue apparently is caused by siproxd failing to resolve the internal router name. Don't know why. I'm in contact with the siproxd developer, by private mail exchange and here in public: http://sourceforge.net/forum/forum.php?thread_id=1750615&forum_id=203640 All other apps (ping etc.) do resolve the name. I wrote a short program employing gethostbyname() myself, and it also succeeds when run on the router. I'm very curious to hear why siproxd doesn't. (2) In a previous mail, I asked whether all requests (REGISTER, SUBSCRIBE, INVITE etc.) should directly be sent to the proxy. This really was a question, because I don't know but did observe that Ekiga circumvents the proxy e.g. when contacting the registrar, which I suspected might be a potential cause of trouble. I know think this might be the right behavior though, but aren't sufficiently into SIP to really claim this right now. You will likely know this. (3) I didn't test the new snapshot package yet, cause I'd really like to wait for deb packages, which apparently aren't up yet. I'll give feedback as soon as possible though. So if it finally comes out as it now looks like, Ekiga was not to blame but I rather troubled you for a siproxd error I failed to properly recognize. Sorry for that. You definitively helped me narrowing it down though, so I hope my appreciation is a slight compensation for the work I've been causing you ... Kind regards, Bruno. From sevmek at free.fr Thu Jun 7 14:44:16 2007 From: sevmek at free.fr (yannick) Date: Thu, 07 Jun 2007 16:44:16 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87r6on96f6.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> Message-ID: <1181227456.20044.112.camel@achille> Le jeudi 07 juin 2007 ? 16:37 +0200, Bruno Hertz a ?crit : > I didn't test the new snapshot package yet, cause I'd really like > to wait for deb packages, which apparently aren't up yet. I'll > give feedback as soon as possible though. There is .deb packages for unbuntu and debian (including amd64): http://buildserver.net/ -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From rshepard at appl-ecosys.com Thu Jun 7 14:46:36 2007 From: rshepard at appl-ecosys.com (Rich Shepard) Date: Thu, 7 Jun 2007 07:46:36 -0700 (PDT) Subject: [Ekiga-list] Installing Video Device (Web Cam) In-Reply-To: References: Message-ID: On Wed, 6 Jun 2007, Rich Shepard wrote: > Ekiga found the headphone/mike (Bus 1, Device 8) just fine, but not the > video device. The configuration tool reported 'no device found.' I thought the quickcam driver was installed. It wasn't. The module has build errors, so I've asked the driver mail list folks for help on that. Rich -- Richard B. Shepard, Ph.D. | The Environmental Permitting Applied Ecosystem Services, Inc. | Accelerator(TM) Voice: 503-667-4517 Fax: 503-667-8863 From dsandras at seconix.com Thu Jun 7 14:54:29 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 07 Jun 2007 16:54:29 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87r6on96f6.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> Message-ID: <1181228069.3782.106.camel@scorpion> Le jeudi 07 juin 2007 ? 16:37 +0200, Bruno Hertz a ?crit : > Damien Sandras writes: > > > Le mardi 05 juin 2007 ? 20:08 +0200, Bent Bagger a ?crit : > >> > > >> > I think I know why Ekiga fails in your case (I'll send you a private > >> > explanation ASAP). > >> > >> Reinvite? > >> > > > > I don't think so. I think sipproxd does not relay the message, no idea > > why ;) > > Perfectly right. You guessed that from those missing TRYINGs, I > presume ;) > > Anyway, here a short update for you, in case you're interested: > > (1) > > The issue apparently is caused by siproxd failing to resolve the > internal router name. Don't know why. I'm in contact with the > siproxd developer, by private mail exchange and here in public: > http://sourceforge.net/forum/forum.php?thread_id=1750615&forum_id=203640 > > All other apps (ping etc.) do resolve the name. I wrote a short > program employing gethostbyname() myself, and it also succeeds when > run on the router. I'm very curious to hear why siproxd doesn't. > > (2) > > In a previous mail, I asked whether all requests (REGISTER, SUBSCRIBE, > INVITE etc.) should directly be sent to the proxy. This really was a > question, because I don't know but did observe that Ekiga circumvents > the proxy e.g. when contacting the registrar, which I suspected might > be a potential cause of trouble. > > I know think this might be the right behavior though, but aren't > sufficiently into SIP to really claim this right now. You will > likely know this. > > (3) > > I didn't test the new snapshot package yet, cause I'd really like > to wait for deb packages, which apparently aren't up yet. I'll > give feedback as soon as possible though. > > > So if it finally comes out as it now looks like, Ekiga was not to > blame but I rather troubled you for a siproxd error I failed to > properly recognize. Sorry for that. You definitively helped me > narrowing it down though, so I hope my appreciation is a slight > compensation for the work I've been causing you ... The INVITE, REGISTER and SUBSCRIBE should be sent to sipproxd. There was a bug in the snapshot preventing this (2.0.3 was ok), so you helped me finding this bug :) Thanks a lot. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Thu Jun 7 14:54:40 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Thu, 07 Jun 2007 16:54:40 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. [SOLVED] In-Reply-To: <1181068721.4535.7.camel@scorpion> (Damien Sandras's message of "Tue, 05 Jun 2007 20:38:41 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> Message-ID: <87k5uf95n3.fsf_-_@gigli.quasi.internal> Damien Sandras writes: > I don't think so. I think sipproxd does not relay the message, no idea > why ;) Turned out to have been my fault. When starting, siproxd does a chroot to a directory where's no /etc/hosts. Hence the internal name didn't resolve. Stupid me. Really sorry. Thanks again, Bruno. From dsandras at seconix.com Thu Jun 7 15:02:32 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 07 Jun 2007 17:02:32 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. [SOLVED] In-Reply-To: <87k5uf95n3.fsf_-_@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87k5uf95n3.fsf_-_@gigli.quasi.internal> Message-ID: <1181228552.3782.112.camel@scorpion> Le jeudi 07 juin 2007 ? 16:54 +0200, Bruno Hertz a ?crit : > Damien Sandras writes: > > > I don't think so. I think sipproxd does not relay the message, no idea > > why ;) > > Turned out to have been my fault. When starting, siproxd does a > chroot to a directory where's no /etc/hosts. Hence the internal > name didn't resolve. Ouch, I would never have thought to that... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Thu Jun 7 15:02:39 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Thu, 07 Jun 2007 17:02:39 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181228069.3782.106.camel@scorpion> (Damien Sandras's message of "Thu, 07 Jun 2007 16:54:29 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181228069.3782.106.camel@scorpion> Message-ID: <87fy53959s.fsf@gigli.quasi.internal> Damien Sandras writes: > The INVITE, REGISTER and SUBSCRIBE should be sent to sipproxd. There was > a bug in the snapshot preventing this (2.0.3 was ok), so you helped me > finding this bug :) I wasn't really sure about this. During the last days, I've been browsing through various SIP docs on the web, while not going into real detail. I seem to remember though that some whitepaper I glanced over said, while INVITEs definitely should go through the proxy, other requests don't need to. Actually, a SIP server/proxy *should* step out of the way at certain points. That's why I brought this up again, because I feared I claimed a potential bug where actually isn't one. Again, you're the expert, so I trust I didn't put anybody on the wrong track. Kind regards, Bruno From dsandras at seconix.com Thu Jun 7 15:05:23 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 07 Jun 2007 17:05:23 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87fy53959s.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181228069.3782.106.camel@scorpion> <87fy53959s.fsf@gigli.quasi.internal> Message-ID: <1181228723.3782.115.camel@scorpion> Le jeudi 07 juin 2007 ? 17:02 +0200, Bruno Hertz a ?crit : > Damien Sandras writes: > > > The INVITE, REGISTER and SUBSCRIBE should be sent to sipproxd. There was > > a bug in the snapshot preventing this (2.0.3 was ok), so you helped me > > finding this bug :) > > I wasn't really sure about this. During the last days, I've been > browsing through various SIP docs on the web, while not going into > real detail. > > I seem to remember though that some whitepaper I glanced over said, > while INVITEs definitely should go through the proxy, other requests > don't need to. Actually, a SIP server/proxy *should* step out of the > way at certain points. That's why I brought this up again, because I > feared I claimed a potential bug where actually isn't one. > > Again, you're the expert, so I trust I didn't put anybody on the wrong > track. Formerly, all SIP softphones where sending PDUs to the outbound proxy. Now, the RFC suggests that you put an initial Route. When there is a Route, the software should send the PDU to the address in that route. The Route header will be updated according various circumstances and using the Record-Route header in PDUs it receives. Doing that, the proxy can decide to step out (it simply does not put a Record-Route header in the 200OK, it means it steps out). That's a tricky thing ;) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From brrhtz at yahoo.de Thu Jun 7 15:10:02 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Thu, 07 Jun 2007 17:10:02 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181227456.20044.112.camel@achille> (yannick's message of "Thu, 07 Jun 2007 16:44:16 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> Message-ID: <87bqfr94xh.fsf@gigli.quasi.internal> yannick writes: > There is .deb packages for unbuntu and debian (including amd64): > http://buildserver.net/ Hey, thanks a lot. I'be been looking only at http://snapshots.ekiga.net/debian/ yet. I must say this project provides outstanding support. It's duly appreciated. Kind regards, Bruno. From brrhtz at yahoo.de Thu Jun 7 15:21:07 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Thu, 07 Jun 2007 17:21:07 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181228723.3782.115.camel@scorpion> (Damien Sandras's message of "Thu, 07 Jun 2007 17:05:23 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181228069.3782.106.camel@scorpion> <87fy53959s.fsf@gigli.quasi.internal> <1181228723.3782.115.camel@scorpion> Message-ID: <877iqf94f0.fsf@gigli.quasi.internal> Damien Sandras writes: > Formerly, all SIP softphones where sending PDUs to the outbound proxy. > Now, the RFC suggests that you put an initial Route. When there is a > Route, the software should send the PDU to the address in that route. > The Route header will be updated according various circumstances and > using the Record-Route header in PDUs it receives. Doing that, the proxy > can decide to step out (it simply does not put a Record-Route header in > the 200OK, it means it steps out). > > That's a tricky thing ;) Well, that makes quite sense. I'm pretty glad it's all properly settled then, and that I learned that much on the way. This one really kept me busy a little these last couple of days ... ;) Kind reagrds, Bruno. From brrhtz at yahoo.de Thu Jun 7 15:44:50 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Thu, 07 Jun 2007 17:44:50 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181227456.20044.112.camel@achille> (yannick's message of "Thu, 07 Jun 2007 16:44:16 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> Message-ID: <873b1393bh.fsf@gigli.quasi.internal> yannick writes: > There is .deb packages for unbuntu and debian (including amd64): > http://buildserver.net/ OK, I took a closer look at those repositories, and for the snapshots debs it's apparently really just http://snapshots.ekiga.net/debian which I've been using already. It's because I noticed the last Ekiga built is 20070530-03-etch.1 that I said it might need a couple of days before I test, since Damien's changes are more recent. Don't know what the deb built cycle is (weekly/monthly?), but I trust it'd be not that long. I'll definitively give feedback when new debs are put up. Thanks a lot, Bruno. From michel.memeteau at gmail.com Thu Jun 7 15:51:50 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Thu, 7 Jun 2007 17:51:50 +0200 Subject: [Ekiga-list] how do you make video conference? In-Reply-To: <1155886122.3647.4.camel@golgoth01> References: <5e8843f90608100830yab485e7q68ffbf74ac538003@mail.gmail.com> <1155886122.3647.4.camel@golgoth01> Message-ID: 2006/8/18, Damien Sandras : > > Le jeudi 10 ao?t 2006 ? 22:30 +0700, Akbar a ?crit : > But how do I make video conference? Video conference is > > simultaneously video chat between more than two person right? I mean > > there are three persons, a, b, and c. a can see b video and c video in > > the same time. if a is speaking, b and c can hear in the same time. b > > can see c video and a video in the same time,..... > You have to use OpenMCU from http://openh323.sf.net > Polycom-based hardware solutions are also possible. Hi I reopen this thread because video conference capability such as skype Did ( 4 people I think ?) , Is really a killing feature with low priority . I just wanted to have your opinion about the SIP vid?o capability of latest asterisk SVN , I asked a simple question on the *vid?o list http://lists.digium.com/pipermail/asterisk-video/2007-June/000700.html What success did you have for SIP vid?o concf capability ? I will try OpenMCU as well , I guess Nat traversal is now as good for H323 as for SIP isn't ? -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at proxy01.sipphone.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Thu Jun 7 16:16:09 2007 From: sevmek at free.fr (yannick) Date: Thu, 07 Jun 2007 18:16:09 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87bqfr94xh.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> <87bqfr94xh.fsf@gigli.quasi.internal> Message-ID: <1181232969.20044.168.camel@achille> Le jeudi 07 juin 2007 ? 17:10 +0200, Bruno Hertz a ?crit : > Hey, thanks a lot. I'be been looking only at > http://snapshots.ekiga.net/debian/ > yet. Yes, it needs an update. -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Thu Jun 7 16:18:14 2007 From: sevmek at free.fr (yannick) Date: Thu, 07 Jun 2007 18:18:14 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <873b1393bh.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> <873b1393bh.fsf@gigli.quasi.internal> Message-ID: <1181233094.20044.171.camel@achille> Le jeudi 07 juin 2007 ? 17:44 +0200, Bruno Hertz a ?crit : > Don't know what the deb built cycle is (weekly/monthly?), but I trust > it'd be not that long. I'll definitively give feedback when new debs > are put up. Approximatly: hourly It seems old because you checked the ekiga version; if opal or pwlib are updated, ekiga still have the time from his own last change. Don't worry it's up to date. Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From brrhtz at yahoo.de Thu Jun 7 17:14:12 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Thu, 07 Jun 2007 19:14:12 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181233094.20044.171.camel@achille> (yannick's message of "Thu, 07 Jun 2007 18:18:14 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> <873b1393bh.fsf@gigli.quasi.internal> <1181233094.20044.171.camel@achille> Message-ID: <87y7iv7km3.fsf@gigli.quasi.internal> yannick writes: > Approximatly: hourly > > It seems old because you checked the ekiga version; if opal or pwlib are > updated, ekiga still have the time from his own last change. > > Don't worry it's up to date. > No, sorry. Did my "apt-get update" and "apt-get upgrade", but there seems to be nothing which could be updated. Looking at the versions of ekiga-snapshot and all packages automatically installed with it (libopal-cvs, libpt-cvs-* etc.), I see all stamped with 20070530-0 or 20070528-0 in the snapshot repo. Also, after the upgrade, I made a test and the error Damien said he had fixed, i.e. REGISTER requests being sent directly to the registrar instead through the proxy, still persists. Are you really sure the Etch packages are build hourly? Because it really seems the last package version are from end of Mai. Kind regards, Bruno. From sevmek at free.fr Thu Jun 7 17:21:06 2007 From: sevmek at free.fr (yannick) Date: Thu, 07 Jun 2007 19:21:06 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <87y7iv7km3.fsf@gigli.quasi.internal> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> <873b1393bh.fsf@gigli.quasi.internal> <1181233094.20044.171.camel@achille> <87y7iv7km3.fsf@gigli.quasi.internal> Message-ID: <1181236866.20044.174.camel@achille> Le jeudi 07 juin 2007 ? 19:14 +0200, Bruno Hertz a ?crit : > yannick writes: > > > Approximatly: hourly > > > > It seems old because you checked the ekiga version; if opal or pwlib are > > updated, ekiga still have the time from his own last change. > > > > Don't worry it's up to date. > > > > No, sorry. Did my "apt-get update" and "apt-get upgrade", but there > seems to be nothing which could be updated. > > Looking at the versions of ekiga-snapshot and all packages > automatically installed with it (libopal-cvs, libpt-cvs-* etc.), I see > all stamped with 20070530-0 or 20070528-0 in the snapshot repo. > > Also, after the upgrade, I made a test and the error Damien said he > had fixed, i.e. REGISTER requests being sent directly to the registrar > instead through the proxy, still persists. > > Are you really sure the Etch packages are build hourly? Because it > really seems the last package version are from end of Mai. > Bad luck; Check this page http://status.buildserver.net/packages/status.php etch is having a problem building opal Regards, Yannick > Kind regards, Bruno. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From brrhtz at yahoo.de Thu Jun 7 17:29:55 2007 From: brrhtz at yahoo.de (Bruno Hertz) Date: Thu, 07 Jun 2007 19:29:55 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181236866.20044.174.camel@achille> (yannick's message of "Thu, 07 Jun 2007 19:21:06 +0200") References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> <873b1393bh.fsf@gigli.quasi.internal> <1181233094.20044.171.camel@achille> <87y7iv7km3.fsf@gigli.quasi.internal> <1181236866.20044.174.camel@achille> Message-ID: <87tztj7jvw.fsf@gigli.quasi.internal> yannick writes: > Bad luck; > Check this page http://status.buildserver.net/packages/status.php > etch is having a problem building opal Yeah. I'll be waiting then. Thanks, Bruno. From rshepard at appl-ecosys.com Thu Jun 7 22:59:24 2007 From: rshepard at appl-ecosys.com (Rich Shepard) Date: Thu, 7 Jun 2007 15:59:24 -0700 (PDT) Subject: [Ekiga-list] Cannot Receive H.323 or SIP Calls Message-ID: Yesterday I installed Ekiga-2.0.9, and configured the audio for the Logitech boom headset (the video's not yet working, but that's a different issue). Today, after loading the webcam modules, I invoked ekiga and had two informational message windows open. One tells me that I cannot receive H.323 calls and the other tells me that I cannot receive SIP calls. Neither message appeared yesterday. There's nothing in the manual or the FAQ about this. I'd greatly appreciate some suggestions from experienced users. TIA, Rich -- Richard B. Shepard, Ph.D. | The Environmental Permitting Applied Ecosystem Services, Inc. | Accelerator(TM) Voice: 503-667-4517 Fax: 503-667-8863 From jpuydt at free.fr Fri Jun 8 03:59:31 2007 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 08 Jun 2007 05:59:31 +0200 Subject: [Ekiga-list] Cannot Receive H.323 or SIP Calls In-Reply-To: References: Message-ID: <4668D423.8050403@free.fr> Rich Shepard wrote: > Yesterday I installed Ekiga-2.0.9, and configured the audio for the > Logitech boom headset (the video's not yet working, but that's a different > issue). > > Today, after loading the webcam modules, I invoked ekiga and had two > informational message windows open. One tells me that I cannot receive H.323 > calls and the other tells me that I cannot receive SIP calls. Neither > message appeared yesterday. > > There's nothing in the manual or the FAQ about this. I'd greatly > appreciate some suggestions from experienced users. Do you have network on the box ? If so, does ekiga listen on the right interface? If so, does another program already own said interface (well, already listens on the ports ekiga would like to use, to be more precise)? Snark on #ekiga From dsandras at seconix.com Fri Jun 8 07:47:01 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 08 Jun 2007 09:47:01 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181236866.20044.174.camel@achille> References: <87k5uiveoc.fsf@gigli.quasi.internal> <1181043279.5423.31.camel@scorpion> <878xayvd4x.fsf@gigli.quasi.internal> <1181045865.5423.35.camel@scorpion> <874plmvauc.fsf@gigli.quasi.internal> <1181047188.5423.39.camel@scorpion> <87zm3etv6x.fsf@gigli.quasi.internal> <1181048898.5423.41.camel@scorpion> <87lkeytmmt.fsf@gigli.quasi.internal> <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> <873b1393bh.fsf@gigli.quasi.internal> <1181233094.20044.171.camel@achille> <87y7iv7km3.fsf@gigli.quasi.internal> <1181236866.20044.174.camel@achille> Message-ID: <1181288821.3705.7.camel@scorpion> Le jeudi 07 juin 2007 ? 19:21 +0200, yannick a ?crit : > Le jeudi 07 juin 2007 ? 19:14 +0200, Bruno Hertz a ?crit : > > yannick writes: > > > > > Approximatly: hourly > > > > > > It seems old because you checked the ekiga version; if opal or pwlib are > > > updated, ekiga still have the time from his own last change. > > > > > > Don't worry it's up to date. > > > > > > > No, sorry. Did my "apt-get update" and "apt-get upgrade", but there > > seems to be nothing which could be updated. > > > > Looking at the versions of ekiga-snapshot and all packages > > automatically installed with it (libopal-cvs, libpt-cvs-* etc.), I see > > all stamped with 20070530-0 or 20070528-0 in the snapshot repo. > > > > Also, after the upgrade, I made a test and the error Damien said he > > had fixed, i.e. REGISTER requests being sent directly to the registrar > > instead through the proxy, still persists. > > > > Are you really sure the Etch packages are build hourly? Because it > > really seems the last package version are from end of Mai. > > > > Bad luck; > Check this page http://status.buildserver.net/packages/status.php > etch is having a problem building opal > Weird, because the failure cause has been fixed by myself last week-end. And it really seems the last try to build happened on the 1st of June. So the build system is stopped. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From geek.arnuld at gmail.com Fri Jun 8 11:20:29 2007 From: geek.arnuld at gmail.com (arnuld) Date: Fri, 8 Jun 2007 16:50:29 +0530 Subject: [Ekiga-list] my Registration always fails Message-ID: i am trying to connect but Registration always fails. i have "unselected" the "echo cancelation" and using right user name and password and have selected right audio codecs: SPEEX, MS-GSM, GSM and G726-16k , as my download-Bandwidth is limited to 29 kb/s. but i always get "Regstration Failed". i tried all other codecs by selecting them one by one but i can not register. i can use the same user name and password to login into www.ekiga.net without any trouble. 10 days ago i could register some times but could not register at other times. these days it always fails to register and it is quite frustrating. with Skype you can easily connect without these "registration failed" troubles but there must be some reason for these failures. any solution ? -- http://arnuld.blogspot.com/ From dsandras at seconix.com Fri Jun 8 11:25:46 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 08 Jun 2007 13:25:46 +0200 Subject: [Ekiga-list] my Registration always fails In-Reply-To: References: Message-ID: <1181301946.3705.32.camel@scorpion> Le vendredi 08 juin 2007 ? 16:50 +0530, arnuld a ?crit : > i am trying to connect but Registration always fails. i have > "unselected" the "echo cancelation" and using right user name and > password and have selected right audio codecs: SPEEX, MS-GSM, GSM and > G726-16k , as my download-Bandwidth is limited to 29 kb/s. > > but i always get "Regstration Failed". i tried all other codecs by > selecting them one by one but i can not register. i can use the same > user name and password to login into www.ekiga.net without any > trouble. 10 days ago i could register some times but could not > register at other times. these days it always fails to register and > it is quite frustrating. with Skype you can easily connect without > these "registration failed" troubles but there must be some reason for > these failures. > > any solution ? > Can you provide a debug output please ? Without a debug output, we can not tell what happens. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From geek.arnuld at gmail.com Fri Jun 8 12:31:29 2007 From: geek.arnuld at gmail.com (arnuld) Date: Fri, 8 Jun 2007 18:01:29 +0530 Subject: [Ekiga-list] my Registration always fails In-Reply-To: <1181301946.3705.32.camel@scorpion> References: <1181301946.3705.32.camel@scorpion> Message-ID: > On 6/8/07, Damien Sandras wrote: > Can you provide a debug output please ? > > Without a debug output, we can not tell what happens. Ok, this is the *full* output of "ekiga -d 4": [arnuld at arch ~]$ ekiga -d 4 2007/06/08 23:36:44.488 0:00.472 ekiga Detected audio plugins: OSS,ALSA 2007/06/08 23:36:44.489 0:00.472 ekiga Detected video plugins: Picture,1394AVC,V4L,V4L2,1394DC 2007/06/08 23:36:44.489 0:00.472 ekiga Detected audio plugins: OSS,ALSA 2007/06/08 23:36:44.489 0:00.472 ekiga Detected video plugins: Picture,1394AVC,V4L,V4L2,1394DC 2007/06/08 23:36:44.516 0:00.499 ekiga Detected the following audio input devices: Default,VIA 8237 with plugin ALSA 2007/06/08 23:36:44.516 0:00.499 ekiga Detected the following audio output devices: Default,VIA 8237 with plugin ALSA 2007/06/08 23:36:44.516 0:00.499 ekiga Detected the following video input devices: No device found with plugin V4L 2007/06/08 23:36:44.516 0:00.499 ekiga Detected the following audio input devices: Default,VIA 8237 with plugin ALSA 2007/06/08 23:36:44.516 0:00.499 ekiga Detected the following audio output devices: Default,VIA 8237 with plugin ALSA 2007/06/08 23:36:44.516 0:00.499 ekiga Detected the following video input devices: No device found with plugin V4L 2007/06/08 23:36:44.551 0:00.534 ekiga AVAHI Failed to create client: Daemon not running 2007/06/08 23:36:44.866 0:00.849 ekiga Ekiga version 2.0.9 2007/06/08 23:36:44.867 0:00.850 ekiga OPAL version 2.2.8 2007/06/08 23:36:44.868 0:00.851 ekiga PWLIB version 1.10.7 2007/06/08 23:36:44.868 0:00.851 ekiga GNOME support enabled 2007/06/08 23:36:44.869 0:00.852 ekiga Fullscreen support enabled 2007/06/08 23:36:44.870 0:00.853 ekiga DBUS support enabled 2007/06/08 23:36:44.873 0:00.857 ekiga Set TCP port range to 30000:30010 2007/06/08 23:36:44.874 0:00.857 ekiga Set RTP port range to 5000:5059 2007/06/08 23:36:44.875 0:00.858 ekiga Set UDP port range to 5060:5100 2007/06/08 23:36:44.876 0:00.859 ekiga OpalEP Created endpoint: h323 2007/06/08 23:36:44.876 0:00.859 ekiga H323 Created endpoint. 2007/06/08 23:36:44.877 0:00.861 ekiga OpalMan Added route "pc:.*=h323:" 2007/06/08 23:36:44.879 0:00.862 ekiga OpalEP Created endpoint: sip 2007/06/08 23:36:44.880 0:00.863 ekiga SIP Created endpoint. 2007/06/08 23:36:44.880 0:00.863 ekiga OpalMan Added route "pc:.*=sip:" 2007/06/08 23:36:44.881 0:00.864 ekiga OpalEP Created endpoint: pc 2007/06/08 23:36:44.882 0:00.866 ekiga PCSS Created PC sound system endpoint. 2007/06/08 23:36:44.883 0:00.876 ekiga OpalMan Added route "h323:.*=pc:" 2007/06/08 23:36:44.894 0:00.877 ekiga OpalMan Added route "sip:.*=pc:" 2007/06/08 23:36:44.950 0:00.934 ekiga AVAHI Error initializing Avahi: %sDaemon not running 2007/06/08 23:36:44.959 0:00.942 Opal Listener:930920 Listen Started listening thread on tcp$192.168.0.2:1720 2007/06/08 23:36:44.959 0:00.942 Opal Listener:930920 Listen Waiting on socket accept on tcp$192.168.0.2:1720 2007/06/08 23:36:44.960 0:00.943 Opal Listener:92e330 Listen Started listening thread on udp$192.168.0.2:5060 2007/06/08 23:36:44.960 0:00.943 Opal Listener:92e330 Listen Waiting on UDP packet on udp$192.168.0.2:5060 2007/06/08 23:36:56.905 0:12.888 GMStunClient:00a0a600 OPAL STUN server "stun.ekiga.net" replies Port Restricted NAT, external IP 59.94.249.25 2007/06/08 23:36:57.120 0:13.103 GMAccounts...t:0094bf40 OpalUDP Binding to interface: 192.168.0.2:32873 2007/06/08 23:36:57.120 0:13.103 GMAccounts...t:0094bf40 SIP Created transport udp$0.0.0.0 2007/06/08 23:36:57.333 0:13.316 GMAccounts...t:0094bf40 OpalUDP Started connect to 86.64.162.35:5060 2007/06/08 23:36:57.600 0:13.583 GMAccounts...t:0094bf40 OpalUDP STUN created socket: 59.94.249.25:5063 2007/06/08 23:36:57.600 0:13.583 GMAccounts...t:0094bf40 SIP Created Transport for Registrar udp$86.64.162.35:5060 2007/06/08 23:36:57.602 0:13.585 GMAccounts...t:0094bf40 SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:www.ekiga.net SIP/2.0 CSeq: 1 REGISTER Via: SIP/2.0/UDP 59.94.249.25:5063;branch=z9hG4bK1c0c1cb7-5814-dc11-81c4-0013d4c4baf3;rport User-Agent: Ekiga/2.0.9 From: ;tag=0c031cb7-5814-dc11-81c4-0013d4c4baf3 Call-ID: c47bd2b6-5814-dc11-81c4-0013d4c4baf3 at arch To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/08 23:36:57.613 0:13.596 SIP Transport:995480 SIP Read thread started. 2007/06/08 23:36:57.613 0:13.596 SIP Transport:995480 SIP Waiting for PDU on udp$86.64.162.35:5060 2007/06/08 23:36:57.830 0:13.813 GMAccounts...t:0094bf40 OpalUDP Binding to interface: 192.168.0.2:32874 2007/06/08 23:36:57.830 0:13.813 GMAccounts...t:0094bf40 SIP Created transport udp$0.0.0.0 2007/06/08 23:36:57.831 0:13.814 GMAccounts...t:0094bf40 OpalUDP Started connect to 86.64.162.35:5060 2007/06/08 23:36:57.962 0:13.945 SIP Transport:995480 SIP PDU Received on udp$86.64.162.35:5060 SIP/2.0 483 Too Many Hops CSeq: 1 REGISTER Via: SIP/2.0/UDP 59.94.249.25:5063;branch=z9hG4bK1c0c1cb7-5814-dc11-81c4-0013d4c4baf3;rport=5063 Server: Sip EXpress router (0.9.6 (i386/linux)) From: ;tag=0c031cb7-5814-dc11-81c4-0013d4c4baf3 Call-ID: c47bd2b6-5814-dc11-81c4-0013d4c4baf3 at arch To: ;tag=12d18c5009a2de32fca8ae9d70ad0321.c014 Warning: 392 86.64.162.35:5060 "Noisy feedback tells: pid=11102 req_src_ip=86.64.162.35 req_src_port=5060 in_uri=sip:www.ekiga.net out_uri=sip:www.ekiga.net via_cnt==18" Content-Length: 0 2007/06/08 23:36:57.962 0:13.945 SIP Transport:995480 SIP Transaction 1 REGISTER completed. 2007/06/08 23:36:57.962 0:13.945 SIP Transport:995480 OpalUDP Ended connect, selecting 59.94.249.25:5063 2007/06/08 23:36:57.963 0:13.946 SIP Transport:995480 SIP Waiting for PDU on udp$86.64.162.35:5060 2007/06/08 23:36:58.099 0:14.082 GMAccounts...t:0094bf40 OpalUDP STUN created socket: 59.94.249.25:5064 2007/06/08 23:36:58.099 0:14.082 GMAccounts...t:0094bf40 SIP Created Transport for Registrar udp$86.64.162.35:5060 2007/06/08 23:36:58.100 0:14.083 GMAccounts...t:0094bf40 SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:arnuld at www.ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 59.94.249.25:5064;branch=z9hG4bK641868b7-5814-dc11-81c4-0013d4c4baf3;rport User-Agent: Ekiga/2.0.9 From: ;tag=b81468b7-5814-dc11-81c4-0013d4c4baf3 Call-ID: d6f23eb7-5814-dc11-81c4-0013d4c4baf3 at arch To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/08 23:36:58.111 0:14.094 SIP Transport:a02af0 SIP Read thread started. 2007/06/08 23:36:58.111 0:14.094 SIP Transport:a02af0 SIP Waiting for PDU on udp$86.64.162.35:5060 2007/06/08 23:36:58.613 0:14.596 Housekeeper SIP Transaction 2 SUBSCRIBE timeout, making retry 1 2007/06/08 23:36:58.613 0:14.596 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:arnuld at www.ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 59.94.249.25:5064;branch=z9hG4bK641868b7-5814-dc11-81c4-0013d4c4baf3;rport User-Agent: Ekiga/2.0.9 From: ;tag=b81468b7-5814-dc11-81c4-0013d4c4baf3 Call-ID: d6f23eb7-5814-dc11-81c4-0013d4c4baf3 at arch To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/08 23:36:58.973 0:14.956 Housekeeper SIP Set state Terminated_Success for transaction 1 REGISTER 2007/06/08 23:36:59.613 0:15.596 Housekeeper SIP Transaction 2 SUBSCRIBE timeout, making retry 2 2007/06/08 23:36:59.613 0:15.596 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:arnuld at www.ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 59.94.249.25:5064;branch=z9hG4bK641868b7-5814-dc11-81c4-0013d4c4baf3;rport User-Agent: Ekiga/2.0.9 From: ;tag=b81468b7-5814-dc11-81c4-0013d4c4baf3 Call-ID: d6f23eb7-5814-dc11-81c4-0013d4c4baf3 at arch To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/08 23:37:01.613 0:17.596 Housekeeper SIP Transaction 2 SUBSCRIBE timeout, making retry 3 2007/06/08 23:37:01.613 0:17.596 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:arnuld at www.ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 59.94.249.25:5064;branch=z9hG4bK641868b7-5814-dc11-81c4-0013d4c4baf3;rport User-Agent: Ekiga/2.0.9 From: ;tag=b81468b7-5814-dc11-81c4-0013d4c4baf3 Call-ID: d6f23eb7-5814-dc11-81c4-0013d4c4baf3 at arch To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/08 23:37:04.113 0:20.096 Housekeeper SIP Set state Terminated_Timeout for transaction 2 SUBSCRIBE 2007/06/08 23:37:07.797 0:23.780 SIP Transport:a02af0 SIP PDU Received on udp$86.64.162.35:5060 SIP/2.0 408 Request Timeout CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 59.94.249.25:5064;branch=z9hG4bK641868b7-5814-dc11-81c4-0013d4c4baf3;rport=5064 Server: Sip EXpress router (0.9.6 (i386/linux)) From: ;tag=b81468b7-5814-dc11-81c4-0013d4c4baf3 Call-ID: d6f23eb7-5814-dc11-81c4-0013d4c4baf3 at arch To: ;tag=45ac72d5874f25c7bbba41009dcb57ec-799e Warning: 392 86.64.162.35:5060 "Noisy feedback tells: pid=11117 req_src_ip=59.94.249.25 req_src_port=5064 in_uri=sip:arnuld at www.ekiga.net out_uri=sip:arnuld at www.ekiga.net via_cnt==0" Content-Length: 0 2007/06/08 23:37:07.798 0:23.781 SIP Transport:a02af0 SIP Waiting for PDU on udp$86.64.162.35:5060 -- http://arnuld.blogspot.com/ From dsandras at seconix.com Fri Jun 8 12:35:42 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 08 Jun 2007 14:35:42 +0200 Subject: [Ekiga-list] my Registration always fails In-Reply-To: References: <1181301946.3705.32.camel@scorpion> Message-ID: <1181306142.3705.58.camel@scorpion> Le vendredi 08 juin 2007 ? 18:01 +0530, arnuld a ?crit : > > On 6/8/07, Damien Sandras wrote: > > > Can you provide a debug output please ? > > > > Without a debug output, we can not tell what happens. > > > Ok, this is the *full* output of "ekiga -d 4": > REGISTER sip:www.ekiga.net SIP/2.0 I really doubt it has ever worked with www.ekiga.net as "registrar". Why don't you use the configuration assistant ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From geek.arnuld at gmail.com Fri Jun 8 12:48:24 2007 From: geek.arnuld at gmail.com (arnuld) Date: Fri, 8 Jun 2007 18:18:24 +0530 Subject: [Ekiga-list] my Registration always fails In-Reply-To: <1181306142.3705.58.camel@scorpion> References: <1181301946.3705.32.camel@scorpion> <1181306142.3705.58.camel@scorpion> Message-ID: > On 6/8/07, Damien Sandras wrote: > I really doubt it has ever worked with www.ekiga.net as "registrar". > > Why don't you use the configuration assistant ? ok, i used it and it is registered now.... funny me.... :-( -- http://arnuld.blogspot.com/ From rshepard at appl-ecosys.com Fri Jun 8 12:51:53 2007 From: rshepard at appl-ecosys.com (Rich Shepard) Date: Fri, 8 Jun 2007 05:51:53 -0700 (PDT) Subject: [Ekiga-list] Cannot Receive H.323 or SIP Calls In-Reply-To: <4668D423.8050403@free.fr> References: <4668D423.8050403@free.fr> Message-ID: On Fri, 8 Jun 2007, Julien Puydt wrote: > Do you have network on the box ? If so, does ekiga listen on the right > interface? If so, does another program already own said interface (well, > already listens on the ports ekiga would like to use, to be more precise)? Yes, we have a network here. How do I identify the ports ekiga wants to use? And, how can I change those ports if there is a conflict? As I wrote, this did not appear on Wednesday when I first installed ekiga, but did yesterday when I tried to configure the video component. Thanks, Julien, Rich -- Richard B. Shepard, Ph.D. | The Environmental Permitting Applied Ecosystem Services, Inc. | Accelerator(TM) Voice: 503-667-4517 Fax: 503-667-8863 From sevmek at free.fr Fri Jun 8 15:17:56 2007 From: sevmek at free.fr (yannick) Date: Fri, 08 Jun 2007 17:17:56 +0200 Subject: [Ekiga-list] Cannot Receive H.323 or SIP Calls In-Reply-To: References: <4668D423.8050403@free.fr> Message-ID: <1181315877.20044.179.camel@achille> Le vendredi 08 juin 2007 ? 05:51 -0700, Rich Shepard a ?crit : > How do I identify the ports ekiga wants to use? And, how can I > change > those ports if there is a conflict? The standard setup use those ports (including a how-to change them): http://wiki.ekiga.org/index.php/Internet_ports_used_by_Ekiga Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From geek.arnuld at gmail.com Fri Jun 8 18:19:03 2007 From: geek.arnuld at gmail.com (arnuld) Date: Fri, 8 Jun 2007 23:49:03 +0530 Subject: [Ekiga-list] 500@ekiga.net does not respond Message-ID: i can connect to 500 at ekiga.net but i do not hear any lday's voice that i used to hear. everything just remains silent. when i disconnect the call then i can hear the beep coming 3 times. i can test my sound clearly without any trouble in "Configuration Assistant" but this 500 at ekiga stuff does not work. any solution ? -- http://arnuld.blogspot.com/ From rshepard at appl-ecosys.com Fri Jun 8 18:54:25 2007 From: rshepard at appl-ecosys.com (Rich Shepard) Date: Fri, 8 Jun 2007 11:54:25 -0700 (PDT) Subject: [Ekiga-list] Cannot Receive H.323 or SIP Calls In-Reply-To: <1181315877.20044.179.camel@achille> References: <4668D423.8050403@free.fr> <1181315877.20044.179.camel@achille> Message-ID: On Fri, 8 Jun 2007, yannick wrote: > The standard setup use those ports (including a how-to change them): > http://wiki.ekiga.org/index.php/Internet_ports_used_by_Ekiga Yannick, Thank you. Two interesting observations: 1) when I run 'nmap localhost' no Ekiga port is listed as in use by any other process, and 2) starting Ekiga today brought it up without the two warning message boxes about not being able to receive incoming calls. Strange. Rich -- Richard B. Shepard, Ph.D. | The Environmental Permitting Applied Ecosystem Services, Inc. | Accelerator(TM) Voice: 503-667-4517 Fax: 503-667-8863 From sevmek at free.fr Fri Jun 8 19:16:09 2007 From: sevmek at free.fr (yannick) Date: Fri, 08 Jun 2007 21:16:09 +0200 Subject: [Ekiga-list] 500@ekiga.net does not respond In-Reply-To: References: Message-ID: <1181330170.20044.191.camel@achille> Le vendredi 08 juin 2007 ? 23:49 +0530, arnuld a ?crit : > i can connect to 500 at ekiga.net but i do not hear any lday's voice that > i used to hear. everything just remains silent. when i disconnect the > call then i can hear the beep coming 3 times. i can test my sound > clearly without any trouble in "Configuration Assistant" but this > 500 at ekiga stuff does not work. > > any solution ? > If I'm correct you have not a good link to internet, try disable PCMU and PCMA in codec audio and enable iLBC which use less bandwith and is accepted by 500. Disable video too, and disable silence detection and echo cancelation. This is a minimal setup with 500. Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From geek.arnuld at gmail.com Fri Jun 8 19:42:47 2007 From: geek.arnuld at gmail.com (arnuld) Date: Sat, 9 Jun 2007 01:12:47 +0530 Subject: [Ekiga-list] 500@ekiga.net does not respond In-Reply-To: <1181330170.20044.191.camel@achille> References: <1181330170.20044.191.camel@achille> Message-ID: > On 6/9/07, yannick wrote: > If I'm correct you have not a good link to internet, right , ISP has monopoly in my area so i have to accept whatever he offers: highest rates and poor bandwidth :-( > try disable PCMU > and PCMA in codec audio and enable iLBC which use less bandwith and is > accepted by 500. these all are already disabled by me > Disable video too, and disable silence detection and > echo cancelation. This is a minimal setup with 500. echo cancelation and echo detection are already disabled. video was enabled. i disabled it and the lady at 500 can put her sweet voice into my ears :-) BTW, i do not even need that video support. i do not have any webcam and i only want voice chat support. thanks Yannick -- http://arnuld.blogspot.com/ From sevmek at free.fr Fri Jun 8 20:30:54 2007 From: sevmek at free.fr (yannick) Date: Fri, 08 Jun 2007 22:30:54 +0200 Subject: [Ekiga-list] 500@ekiga.net does not respond In-Reply-To: References: <1181330170.20044.191.camel@achille> Message-ID: <1181334654.20044.196.camel@achille> Le samedi 09 juin 2007 ? 01:12 +0530, arnuld a ?crit : > echo cancelation and echo detection are already disabled. video was > enabled. i disabled it and the lady at 500 can put her sweet voice > into my ears :-) BTW, i do not even need that video support. i do > not have any webcam and i only want voice chat support. > The problem was video probably; if ekiga can't send video from a webcam it transfers a bouncing logo eating your bandwidth. You can try enable silence detection and echo cancellation to see if it improves sound (it won't consume any bandwidth, but may be related with some issues you might experience...). > > thanks Yannick You're welcome. > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From kk at verfaction.de Fri Jun 8 23:22:54 2007 From: kk at verfaction.de (Kilian Krause) Date: Sat, 9 Jun 2007 01:22:54 +0200 Subject: [Ekiga-list] Ekiga, siproxd on Debian Etch troubles. In-Reply-To: <1181288821.3705.7.camel@scorpion> References: <1181061974.5423.120.camel@scorpion> <2e19719f0706051108s42f04748v6225063b5c405b01@mail.gmail.com> <1181068721.4535.7.camel@scorpion> <87r6on96f6.fsf@gigli.quasi.internal> <1181227456.20044.112.camel@achille> <873b1393bh.fsf@gigli.quasi.internal> <1181233094.20044.171.camel@achille> <87y7iv7km3.fsf@gigli.quasi.internal> <1181236866.20044.174.camel@achille> <1181288821.3705.7.camel@scorpion> Message-ID: <20070608232254.GG1514@mx.verfaction.de> Damien, > > Bad luck; > > Check this page http://status.buildserver.net/packages/status.php > > etch is having a problem building opal > > > > Weird, because the failure cause has been fixed by myself last week-end. > And it really seems the last try to build happened on the 1st of June. > > So the build system is stopped. yes, the usual hang in the cvs2cl.. thanks for the hint. should be fixed now. -- Best regards, Kilian -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: Digital signature URL: From geek.arnuld at gmail.com Sat Jun 9 05:02:19 2007 From: geek.arnuld at gmail.com (arnuld) Date: Sat, 9 Jun 2007 10:32:19 +0530 Subject: [Ekiga-list] 500@ekiga.net does not respond In-Reply-To: <1181334654.20044.196.camel@achille> References: <1181330170.20044.191.camel@achille> <1181334654.20044.196.camel@achille> Message-ID: > On 6/9/07, yannick wrote: > >arnuld wrote: > > echo cancelation and echo detection are already disabled. video was > > enabled. i disabled it and the lady at 500 can put her sweet voice > > into my ears :-) BTW, i do not even need that video support. i do > > not have any webcam and i only want voice chat support. > The problem was video probably; if ekiga can't send video from a webcam > it transfers a bouncing logo eating your bandwidth. i saw that bouncing logo, fire-coloured, and did not even know that it eats bandwidth > You can try enable silence detection and echo cancellation to see if it > improves sound (it won't consume any bandwidth, but may be related with > some issues you might experience...). only "echo cancellation" improves sound quality. -- http://arnuld.blogspot.com/ From sevmek at free.fr Sat Jun 9 05:38:02 2007 From: sevmek at free.fr (yannick) Date: Sat, 09 Jun 2007 07:38:02 +0200 Subject: [Ekiga-list] 500@ekiga.net does not respond In-Reply-To: References: <1181330170.20044.191.camel@achille> <1181334654.20044.196.camel@achille> Message-ID: <1181367482.20044.203.camel@achille> Le samedi 09 juin 2007 ? 10:32 +0530, arnuld a ?crit : > > You can try enable silence detection and echo cancellation to see if > it > > improves sound (it won't consume any bandwidth, but may be related > with > > some issues you might experience...). > > only "echo cancellation" improves sound quality. Yes, you're right. The point with silence detection is: when you don't talk, ekiga will stop sending paquets and as soon as you'll talk again ekiga will send your voice. If you don't use silence detection ekiga will send paquets all time during the communication (no matter you're talking or not). You can see that in the statistic tab. -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From geek.arnuld at gmail.com Sat Jun 9 05:54:07 2007 From: geek.arnuld at gmail.com (arnuld) Date: Sat, 9 Jun 2007 11:24:07 +0530 Subject: [Ekiga-list] 500@ekiga.net does not respond In-Reply-To: <1181367482.20044.203.camel@achille> References: <1181330170.20044.191.camel@achille> <1181334654.20044.196.camel@achille> <1181367482.20044.203.camel@achille> Message-ID: > On 6/9/07, yannick wrote: > Yes, you're right. The point with silence detection is: when you don't > talk, ekiga will stop sending paquets and as soon as you'll talk again > ekiga will send your voice. If you don't use silence detection ekiga > will send paquets all time during the communication (no matter you're > talking or not). You can see that in the statistic tab. WOW... never seen such a powerful Voice-chat application. i am impressed. now Yahoo messenger, Skype and Rediff and all others feel like a crap > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- http://arnuld.blogspot.com/ From bernat.tallaferro at gmail.com Sat Jun 9 18:13:09 2007 From: bernat.tallaferro at gmail.com (Bernat Tallaferro) Date: Sat, 9 Jun 2007 20:13:09 +0200 Subject: [Ekiga-list] Windows installation problems Message-ID: <1d9d9b240706091113m7dbdf8e8wcc9425c189bcee61@mail.gmail.com> Hi, I am a Gnome user and I've wanting to use Ekiga for a long time. I'm using WengoPhone at the moment and I'm satisfied with it, but I've always wanted to test Ekiga as well. The problem is that my contacts are using Windows. I tried the Windows installer on one of my relatives' computer some months ago, and after installation Ekiga would consistently crash every time it was started, so I had to resort to Openwengo there. Now I've tried the Windows installer on a Windows XP computer again, and it seems that this package is not marked as experimental anymore. I simply downloaded the package, started the executable and when it asked me for the location where I wanted to install GTK I choose the default one (C:\Program Files\Ekiga). After clicking "Install", the installer starts and after a few seconds an error comes up: "Error installing GTK runtime. Would you like to continue anyway?" After that, I can always either cancel the installation or go on, but in any case Ekiga obviously won't run without without GTK. Any ideas? Thanks. From geek.arnuld at gmail.com Sat Jun 9 18:20:20 2007 From: geek.arnuld at gmail.com (arnuld) Date: Sat, 9 Jun 2007 23:50:20 +0530 Subject: [Ekiga-list] Windows installation problems In-Reply-To: <1d9d9b240706091113m7dbdf8e8wcc9425c189bcee61@mail.gmail.com> References: <1d9d9b240706091113m7dbdf8e8wcc9425c189bcee61@mail.gmail.com> Message-ID: > On 6/9/07, Bernat Tallaferro wrote: > Hi, > > I am a Gnome user and I've wanting to use Ekiga for a long time. I'm > using WengoPhone at the moment and I'm satisfied with it, but I've > always wanted to test Ekiga as well. > > The problem is that my contacts are using Windows. I tried the Windows > installer on one of my relatives' computer some months ago, and after > installation Ekiga would consistently crash every time it was started, > so I had to resort to Openwengo there. > > Now I've tried the Windows installer on a Windows XP computer again, > and it seems that this package is not marked as experimental anymore. > > I simply downloaded the package, started the executable and when it > asked me for the location where I wanted to install GTK I choose the > default one (C:\Program Files\Ekiga). After clicking "Install", the > installer starts and after a few seconds an error comes up: > > "Error installing GTK runtime. Would you like to continue anyway?" > > After that, I can always either cancel the installation or go on, but > in any case Ekiga obviously won't run without without GTK. > > Any ideas? yes, you need to install GTK+ 1st. go Google with keywords "GTK+ windows" > Thanks. welcome -- http://arnuld.blogspot.com/ From enzo.arlati at libero.it Sat Jun 9 22:03:30 2007 From: enzo.arlati at libero.it (enzo) Date: Sun, 10 Jun 2007 00:03:30 +0200 Subject: [Ekiga-list] how create an account h.323 Message-ID: <466B23B2.3060405@libero.it> I'have an account sip and it seems to works with ekiga ( I only tested iy with sip:500 at ekiga.net ) I also want to register an account H.323 just to test it, but I didn't found how make the registration. Can someone tell me how or where connect to to register an account h.323 ' regards, Enzo ============================================================================ REPLY TO: perl -e 'print qq^VVCWCQJUVD00YQVWKVBPG^^qq^3898m08970Yp584299l93^ ' VOIP SKYPE:earlati - VOIP SIP: sip:earlati at ekiga.net AIM:earlati - ICQ:321489699 - MSN:enzo.arlati at libero.it http: http://earlati.freehostia.com ============================================================================ trusted computing, who is it ? --> http://www.p2pforum.it/counter/click.php?id=21 ============================================================================ From rjob at gulftel.com Sun Jun 10 02:43:54 2007 From: rjob at gulftel.com (bob olbrich) Date: Sat, 09 Jun 2007 21:43:54 -0500 Subject: [Ekiga-list] Win32 Ekiga 2.0.9-BETA connection problems Message-ID: <466B656A.9000302@gulftel.com> Hello again, It bounced again with only one attachment !!! So, instead: Go here to see the PCMA only log. Thanks, Bob ---------------------------------------------------------------------- hello again Here's the PCMA error log Hi, Le mercredi 06 juin 2007 ? 16:49 -0500, bob olbrich a ?crit : > Hello again, > > I tried all three combinations (PCMA,PCMU,PCMA&PCMU) > No change in the results - still no connection. Just post one of them, for example the one with only PCMA enabled. Of course, the ideal is to upload its content somewhere like pastebin.ca. There are too many subscribers on this list to allow attachments to be sent to everyone... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list r. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Sun Jun 10 11:43:08 2007 From: jpuydt at free.fr (Julien Puydt) Date: Sun, 10 Jun 2007 13:43:08 +0200 Subject: [Ekiga-list] how create an account h.323 In-Reply-To: <466B23B2.3060405@libero.it> References: <466B23B2.3060405@libero.it> Message-ID: <466BE3CC.30804@free.fr> enzo wrote: > I'have an account sip and it seems to works with ekiga ( I only tested > iy with sip:500 at ekiga.net ) Yes, ekiga.net provides SIP accounts. > I also want to register an account H.323 just to test it, but I didn't > found how make the registration. > Can someone tell me how or where connect to to register an account h.323 ' No, ekiga.net doesn't provide H.323 accounts. Snark From michel.memeteau at gmail.com Sun Jun 10 11:53:24 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Sun, 10 Jun 2007 13:53:24 +0200 Subject: [Ekiga-list] how create an account h.323 In-Reply-To: <466BE3CC.30804@free.fr> References: <466B23B2.3060405@libero.it> <466BE3CC.30804@free.fr> Message-ID: 2007/6/10, Julien Puydt : > enzo wrote: > > I also want to register an account H.323 just to test it, but I didn't > > found how make the registration. > > Can someone tell me how or where connect to to register an account h.323' > > No, ekiga.net doesn't provide H.323 accounts. I Guess diamondcard.us does as it was the old way for ekiga to use it . BTW : Who knows an h323 server to test openmcu/vid?o ? -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From ML at Bartschnet.de Sun Jun 10 12:58:42 2007 From: ML at Bartschnet.de (Rene Bartsch) Date: Sun, 10 Jun 2007 14:58:42 +0200 (CEST) Subject: [Ekiga-list] State of ZRTP integration? Message-ID: <63787.84.174.143.186.1181480322.squirrel@www.bartschnet.de> Hi, how is the current state of ZRTP integration into Ekiga? Thanx Renne From enzo.arlati at libero.it Sun Jun 10 16:47:17 2007 From: enzo.arlati at libero.it (enzo) Date: Sun, 10 Jun 2007 18:47:17 +0200 Subject: [Ekiga-list] how create an account h.323 In-Reply-To: <466BE3CC.30804@free.fr> References: <466B23B2.3060405@libero.it> <466BE3CC.30804@free.fr> Message-ID: <466C2B15.5070009@libero.it> but,the protocol H.323 is still used somewhere and if it is then where it's used. or, it is an old protocol still mentioned just fot historycal compatibility ? Julien Puydt wrote: > > No, ekiga.net doesn't provide H.323 accounts. > > Snark > > ============================================================================ REPLY TO: perl -e 'print qq^VVCWCQJUVD00YQVWKVBPG^^qq^3898m08970Yp584299l93^ ' VOIP SKYPE:earlati - VOIP SIP: sip:earlati at ekiga.net AIM:earlati - ICQ:321489699 - MSN:enzo.arlati at libero.it http: http://earlati.freehostia.com ============================================================================ trusted computing, who is it ? --> http://www.p2pforum.it/counter/click.php?id=21 ============================================================================ From ray.ishido at gmail.com Mon Jun 11 14:09:07 2007 From: ray.ishido at gmail.com (Ray Ishido) Date: Mon, 11 Jun 2007 11:09:07 -0300 Subject: [Ekiga-list] sound quality is not good In-Reply-To: References: <1180522656.3760.0.camel@scorpion> <1180523064.6890.37.camel@achille> Message-ID: <466D5783.2030408@gmail.com> An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Jun 11 18:04:19 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 11 Jun 2007 20:04:19 +0200 Subject: [Ekiga-list] how create an account h.323 In-Reply-To: <466C2B15.5070009@libero.it> References: <466B23B2.3060405@libero.it> <466BE3CC.30804@free.fr> <466C2B15.5070009@libero.it> Message-ID: <1181585059.4445.10.camel@scorpion> Le dimanche 10 juin 2007 ? 18:47 +0200, enzo a ?crit : > but,the protocol H.323 is still used somewhere and if it is then where > it's used. > or, it is an old protocol still mentioned just fot historycal > compatibility ? > It is still being used at many places, by various providers, by various hardware vendors (CISCO, Polycom, ...), but it should disappear at some point. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon Jun 11 18:04:50 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 11 Jun 2007 20:04:50 +0200 Subject: [Ekiga-list] State of ZRTP integration? In-Reply-To: <63787.84.174.143.186.1181480322.squirrel@www.bartschnet.de> References: <63787.84.174.143.186.1181480322.squirrel@www.bartschnet.de> Message-ID: <1181585090.4445.12.camel@scorpion> Le dimanche 10 juin 2007 ? 14:58 +0200, Rene Bartsch a ?crit : > Hi, > > how is the current state of ZRTP integration into Ekiga? I think it is stalled... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon Jun 11 18:23:18 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 11 Jun 2007 20:23:18 +0200 Subject: [Ekiga-list] Win32 Ekiga 2.0.9-BETA connection problems In-Reply-To: <466B656A.9000302@gulftel.com> References: <466B656A.9000302@gulftel.com> Message-ID: <1181586198.4445.24.camel@scorpion> Hi, Le samedi 09 juin 2007 ? 21:43 -0500, bob olbrich a ?crit : > Hello again, > > It bounced again with only one attachment !!! > > So, instead: > > Go here to see the PCMA only log. > Ok, it is now clear that something between you and the remote (ekiga.net) eats the answers of the SIP proxy. Do you have any control over your router to see if it receives the answers ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From bloodandsoil76 at gmail.com Mon Jun 11 23:24:52 2007 From: bloodandsoil76 at gmail.com (Blood Soil) Date: Tue, 12 Jun 2007 08:24:52 +0900 Subject: [Ekiga-list] Logitech QuickCam(r) Ultra Vision Message-ID: <482b77ac0706111624g3e377d60j164b77b79dcd8ca@mail.gmail.com> Dear List, In the First Time Configuration Assistant, at the Video Devices step, it says "No device found". I am running Debian Etch (Stable) and Ekiga 2.0.3. I have a Logitech QuickCam(r) Ultra Vision. It works just fine on Windows. Is this a known issue or does anyone have a suggestion on how to get this working? Thanks. From bloodandsoil76 at gmail.com Tue Jun 12 02:29:30 2007 From: bloodandsoil76 at gmail.com (Blood Soil) Date: Tue, 12 Jun 2007 11:29:30 +0900 Subject: [Ekiga-list] Logitech QuickCam(r) Ultra Vision In-Reply-To: <482b77ac0706111624g3e377d60j164b77b79dcd8ca@mail.gmail.com> References: <482b77ac0706111624g3e377d60j164b77b79dcd8ca@mail.gmail.com> Message-ID: <482b77ac0706111929o4eac0850mf134c5085d85456a@mail.gmail.com> I solved the issue and I wanted to share it with the list. 1. apt-get install linux-uvc-source 2. cd /usr/src 3. tar -xjf linux-uvc.tar.bz2 4. cd modules/linux-uvc/ 5. make 6. make install 7. cp /usr/src/modules/linux-uvc/uvcvideo.ko /lib/modules/2.6.18-4-686/kernel/drivers/video/ 8. update-modules 9. depmod -a 10. modprobe uvcvideo 11. Now add uvcvideo to your /etc/modules Now when I open Ekiga it shows "USB Video Class Device" under the Input Device. On 6/12/07, Blood Soil wrote: > Dear List, > > In the First Time Configuration Assistant, at the Video Devices step, > it says "No device found". > > I am running Debian Etch (Stable) and Ekiga 2.0.3. I have a Logitech > QuickCam(r) Ultra Vision. > > It works just fine on Windows. > > Is this a known issue or does anyone have a suggestion on how to get > this working? > > Thanks. > From craigs at postincrement.com Wed Jun 13 00:17:53 2007 From: craigs at postincrement.com (Craig Southeren) Date: Wed, 13 Jun 2007 10:17:53 +1000 Subject: [Ekiga-list] State of ZRTP integration? In-Reply-To: <1181585090.4445.12.camel@scorpion> References: <63787.84.174.143.186.1181480322.squirrel@www.bartschnet.de> <1181585090.4445.12.camel@scorpion> Message-ID: <466F37B1.8030706@postincrement.com> Damien Sandras wrote: > Le dimanche 10 juin 2007 ? 14:58 +0200, Rene Bartsch a ?crit : > Hi, > > how is the current state of ZRTP integration into Ekiga? > I think it is stalled...-- No, it is not stalled. I have spent a lot of time with Phil Zimmermann over the past few months to ensure that the ZRTP toolkit is available as an Open Source project for OPAL and Ekiga users. This is now done, and Phil's SDK is now available under an Open Source license that will allow it to be used by Ekiga. The ZRTP toolkit has been integrated into the OPAL RTP stack and compile system. I've been using SRTP (which is the underlying protocol for ZRTP) with OPAL for many months and it works great. The next step is to provide an API within OPAL that applications can use to manage ZRTP sessions. I exchanged emails yesterday with one of the ZRTP developers and they will be working on this. Craig ----------------------------------------------------------------------- Craig Southeren Post Increment ? VoIP Consulting and Software craigs at postincrement.com.au www.postincrement.com.au Phone: +61 243654666 ICQ: #86852844 Fax: +61 243656905 MSN: craig_southeren at hotmail.com Mobile: +61 417231046 Jabber: craigs at jabber.org "It takes a man to suffer ignorance and smile. Be yourself, no matter what they say." Sting From sevmek at free.fr Wed Jun 13 08:56:04 2007 From: sevmek at free.fr (yannick) Date: Wed, 13 Jun 2007 10:56:04 +0200 Subject: [Ekiga-list] State of ZRTP integration? In-Reply-To: <466F37B1.8030706@postincrement.com> References: <63787.84.174.143.186.1181480322.squirrel@www.bartschnet.de> <1181585090.4445.12.camel@scorpion> <466F37B1.8030706@postincrement.com> Message-ID: <1181724964.20044.232.camel@achille> Le mercredi 13 juin 2007 ? 10:17 +1000, Craig Southeren a ?crit : > Damien Sandras wrote: > > Le dimanche 10 juin 2007 ? 14:58 +0200, Rene Bartsch a ?crit : > > > Hi, > > > how is the current state of ZRTP integration into Ekiga? > > I think it is stalled...-- > > No, it is not stalled. > > I have spent a lot of time with Phil Zimmermann over the past few months > to ensure that the ZRTP toolkit is available as an Open Source project > for OPAL and Ekiga users. This is now done, and Phil's SDK is now > available under an Open Source license that will allow it to be used by > Ekiga. > > The ZRTP toolkit has been integrated into the OPAL RTP stack and compile > system. I've been using SRTP (which is the underlying protocol for ZRTP) > with OPAL for many months and it works great. > > The next step is to provide an API within OPAL that applications can use > to manage ZRTP sessions. I exchanged emails yesterday with one of the > ZRTP developers and they will be working on this. > > Craig Hurrah \o/ Thank you. Regards, Yannick > > ----------------------------------------------------------------------- > Craig Southeren Post Increment ? VoIP Consulting and Software > craigs at postincrement.com.au www.postincrement.com.au > > Phone: +61 243654666 ICQ: #86852844 > Fax: +61 243656905 MSN: craig_southeren at hotmail.com > Mobile: +61 417231046 Jabber: craigs at jabber.org > > "It takes a man to suffer ignorance and smile. > Be yourself, no matter what they say." Sting > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From michel.memeteau at gmail.com Wed Jun 13 15:17:46 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Wed, 13 Jun 2007 17:17:46 +0200 Subject: [Ekiga-list] Quick Question : MCEsip Message-ID: Hi , It's a bit off topic , But did someone use MCEsipphone with ekiga ? Or do you know it capabilities ? http://mcesipphone.oabsoftware.nl/ I guess they are using the RTC api from MS so should be the same as Windows messenger ( very low fps ? ) -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From strombrg at gmail.com Thu Jun 14 05:09:39 2007 From: strombrg at gmail.com (Dan Stromberg) Date: Wed, 13 Jun 2007 22:09:39 -0700 Subject: [Ekiga-list] Ekiga from home to work - local view only? Message-ID: Hi folks. Thanks for the great software. I'm trying to get ekiga working from work to home and vice versa. I can get a connection, despite the software having indicated my workplace is using symmetric NAT. I can use spcaview to see myself on the cameras in QCIF and 640x480. I can get a local view in ekiga in QCIF resolution. I can't seem to switch views to remote or side by side though - nothing changes when I select them. What do I need to do to get a side by side view? Also, is there a way of getting ekiga to take advantage of the 640x480 resolution my cameras can do? And is there a way of scaling the video to full screen? Thanks! -- Dan Stromberg -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjob at gulftel.com Fri Jun 15 01:46:09 2007 From: rjob at gulftel.com (bob olbrich) Date: Thu, 14 Jun 2007 20:46:09 -0500 Subject: [Ekiga-list] Win32 Ekiga 2.0.9-BETA connection problems In-Reply-To: <1181586198.4445.24.camel@scorpion> References: <466B656A.9000302@gulftel.com> <1181586198.4445.24.camel@scorpion> Message-ID: <4671EF61.8040900@gulftel.com> Hello, No control. My ISP-supplied router is password-protected. During my experiments with Gnomemeeting a few years ago I asked if I could be given access. They said go buy your own router. I guess that is the choice I must face. Thanks anyway, Bob Damien Sandras wrote: >Hi, > >Le samedi 09 juin 2007 ? 21:43 -0500, bob olbrich a ?crit : > > >>Hello again, >> >>It bounced again with only one attachment !!! >> >>So, instead: >> >>Go here to see the PCMA only log. >> >> >> > > >Ok, it is now clear that something between you and the remote >(ekiga.net) eats the answers of the SIP proxy. > >Do you have any control over your router to see if it receives the >answers ? > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Fri Jun 15 07:56:53 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 15 Jun 2007 09:56:53 +0200 Subject: [Ekiga-list] Ekiga from home to work - local view only? In-Reply-To: References: Message-ID: <1181894213.3761.5.camel@scorpion> Hi, Le mercredi 13 juin 2007 ? 22:09 -0700, Dan Stromberg a ?crit : > > Hi folks. > > Thanks for the great software. > > I'm trying to get ekiga working from work to home and vice versa. > > I can get a connection, despite the software having indicated my > workplace is using symmetric NAT. > > I can use spcaview to see myself on the cameras in QCIF and 640x480. > > I can get a local view in ekiga in QCIF resolution. > > I can't seem to switch views to remote or side by side though - > nothing changes when I select them. > Probably you do not receive incoming video. > What do I need to do to get a side by side view? > > Also, is there a way of getting ekiga to take advantage of the 640x480 > resolution my cameras can do? And is there a way of scaling the video > to full screen? Not yet... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From strombrg at gmail.com Fri Jun 15 16:46:46 2007 From: strombrg at gmail.com (Dan Stromberg) Date: Fri, 15 Jun 2007 09:46:46 -0700 Subject: [Ekiga-list] Ekiga from home to work - local view only? In-Reply-To: <1181894213.3761.5.camel@scorpion> References: <1181894213.3761.5.camel@scorpion> Message-ID: On 6/15/07, Damien Sandras wrote: > > Hi, > > Le mercredi 13 juin 2007 ? 22:09 -0700, Dan Stromberg a ?crit : > > > > Hi folks. > > > > Thanks for the great software. > > > > I'm trying to get ekiga working from work to home and vice versa. > > > > I can get a connection, despite the software having indicated my > > workplace is using symmetric NAT. > > > > I can use spcaview to see myself on the cameras in QCIF and 640x480. > > > > I can get a local view in ekiga in QCIF resolution. > > > > I can't seem to switch views to remote or side by side though - > > nothing changes when I select them. > > > > Probably you do not receive incoming video. What would I look for in a sniffer to confirm this? Is there a specific port I can check? Thanks for the response. -- Dan Stromberg -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Fri Jun 15 16:53:25 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 15 Jun 2007 18:53:25 +0200 Subject: [Ekiga-list] Ekiga from home to work - local view only? In-Reply-To: References: <1181894213.3761.5.camel@scorpion> Message-ID: <1181926405.3051.0.camel@scorpion> Le vendredi 15 juin 2007 ? 09:46 -0700, Dan Stromberg a ?crit : > > > On 6/15/07, Damien Sandras wrote: > Hi, > > Le mercredi 13 juin 2007 ? 22:09 -0700, Dan Stromberg a > ?crit : > > > > Hi folks. > > > > Thanks for the great software. > > > > I'm trying to get ekiga working from work to home and vice > versa. > > > > I can get a connection, despite the software having > indicated my > > workplace is using symmetric NAT. > > > > I can use spcaview to see myself on the cameras in QCIF and > 640x480. > > > > I can get a local view in ekiga in QCIF resolution. > > > > I can't seem to switch views to remote or side by side > though - > > nothing changes when I select them. > > > > Probably you do not receive incoming video. > > What would I look for in a sniffer to confirm this? > Check the -d 4 output or post it somewhere. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From mmendez534 at gmail.com Sat Jun 16 01:58:49 2007 From: mmendez534 at gmail.com (Manuel Mendez) Date: Fri, 15 Jun 2007 21:58:49 -0400 Subject: [Ekiga-list] Ekiga on Windows, Video problem Message-ID: <7d6c74970706151858v16a1fed2r7f437c916ae0b384@mail.gmail.com> Hi I currently use Ubuntu on my personal comp and wanted to try the windows version at home. It installed just fine on the mac running Vista. I get to call 500 at ekiga.net just fine and everything is going pretty good. Great work. The only problem I faced is that when I installed my personal Quickcam Notebook Deluxe and ran the configuration druid again in devices I get Microsoft WDM Image Capture (Win 32) and then just a green screen. The camera works fine with the supplied logitech software. Any ideas behind my problem? Thanks and keep up the great work! -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Sat Jun 16 11:44:38 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Sat, 16 Jun 2007 13:44:38 +0200 Subject: [Ekiga-list] Ekiga on Windows, Video problem In-Reply-To: <7d6c74970706151858v16a1fed2r7f437c916ae0b384@mail.gmail.com> References: <7d6c74970706151858v16a1fed2r7f437c916ae0b384@mail.gmail.com> Message-ID: 2007/6/16, Manuel Mendez : > > Hi I currently use Ubuntu on my personal comp and wanted to try the > windows version at home. It installed just fine on the mac running Vista. I > get to call 500 at ekiga.net just fine and everything is going pretty good. You don't have an isight on the mac I guess ? So 500 worked with voice only ? Great work. The only problem I faced is that when I installed my personal > Quickcam Notebook Deluxe and ran the configuration druid again in devices I > get Microsoft WDM Image Capture (Win 32) and then just a green screen. The > camera works fine with the supplied logitech software. Any ideas behind my > problem? I'm not Sure but I think WDM = direct X ? So works only on SVN ... By the way ? Are there automatic builds of ekiga Win32 ? because http://snapshots.seconix.com/win32/ seems to be old ? -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From vincent_luba at colombus.org Sat Jun 16 11:59:56 2007 From: vincent_luba at colombus.org (Vincent Luba) Date: Sat, 16 Jun 2007 13:59:56 +0200 Subject: [Ekiga-list] Ekiga on Windows, Video problem In-Reply-To: References: <7d6c74970706151858v16a1fed2r7f437c916ae0b384@mail.gmail.com> Message-ID: <4673D0BC.1050200@colombus.org> Hi, michel memeteau a ?crit : > 2007/6/16, Manuel Mendez >: > > Hi I currently use Ubuntu on my personal comp and wanted to try > the windows version at home. It installed just fine on the mac > running Vista. I get to call 500 at ekiga.net > just fine and everything is going pretty good. > > > You don't have an isight on the mac I guess ? So 500 worked with voice > only ? > > Great work. The only problem I faced is that when I installed my > personal Quickcam Notebook Deluxe and ran the configuration druid > again in devices I get Microsoft WDM Image Capture (Win 32) and > then just a green screen. The camera works fine with the supplied > logitech software. Any ideas behind my problem? > > > I'm not Sure but I think WDM = direct X ? So works only on SVN ... > WDM is NOT directX. This might be the problem. Ekiga uses windowsmultimedia for the capture, which is pretty old. Maybe it is not supported anymore with that camera. It would be nice to test as soon as the directX capture is available (already in the cvs I think). Meanwhile, if you can test with another webcam. > By the way ? Are there automatic builds of ekiga Win32 ? because > http://snapshots.seconix.com/win32/ > seems to be old ? > Yes, on SVN under ekiga/win32/ path. Luba Vincent -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Sun Jun 17 14:17:13 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 17 Jun 2007 16:17:13 +0200 Subject: [Ekiga-list] Current HEAD broken Message-ID: <1182089833.20865.13.camel@scorpion> Hi all, If you are testing Ekiga Trunk, please do it with older OPAL releases. Current OPAL HEAD is broken with Ekiga and will be fixed at a later stage. Sorry for the inconvenience, -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From strombrg at gmail.com Sun Jun 17 23:12:58 2007 From: strombrg at gmail.com (Dan Stromberg) Date: Sun, 17 Jun 2007 16:12:58 -0700 Subject: [Ekiga-list] Ekiga from home to work - local view only? In-Reply-To: <1181926405.3051.0.camel@scorpion> References: <1181894213.3761.5.camel@scorpion> <1181926405.3051.0.camel@scorpion> Message-ID: It appears that: 1. home to work without -d gives a connection but no video 2. work to home without -d gives a connection but no video 3. home to work with -d 4 does not give a connection 4. work to home with -d 4 gives a connection and bidirectional video I can do what I wanted to do by running -d 4 and using a phone from home to ask at work to ekiga home, so I have what I wanted from ekiga. It's slightly inconvenient, but it's workable. Is this a situation that is addressed in a later version of the ekiga sources and/or dependent libraries? Ifnot, is there interest among the ekiga developers in using this situation to improve ekiga? I'm willing to commit some of my time to coming up with a decent bug report and running some tests. I'm using ekiga 2.0.9.both at home and work. The one at home I built by hand, and the one at work, I built with garnome. On 6/15/07, Damien Sandras wrote: > > Le vendredi 15 juin 2007 ? 09:46 -0700, Dan Stromberg a ?crit : > > > > > > On 6/15/07, Damien Sandras wrote: > > Hi, > > > > Le mercredi 13 juin 2007 ? 22:09 -0700, Dan Stromberg a > > ?crit : > > > > > > Hi folks. > > > > > > Thanks for the great software. > > > > > > I'm trying to get ekiga working from work to home and vice > > versa. > > > > > > I can get a connection, despite the software having > > indicated my > > > workplace is using symmetric NAT. > > > > > > I can use spcaview to see myself on the cameras in QCIF and > > 640x480. > > > > > > I can get a local view in ekiga in QCIF resolution. > > > > > > I can't seem to switch views to remote or side by side > > though - > > > nothing changes when I select them. > > > > > > > Probably you do not receive incoming video. > > > > What would I look for in a sniffer to confirm this? > > > > Check the -d 4 output or post it somewhere. > > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Dan Stromberg -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Jun 18 10:03:55 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 18 Jun 2007 12:03:55 +0200 Subject: [Ekiga-list] Ekiga from home to work - local view only? In-Reply-To: References: <1181894213.3761.5.camel@scorpion> <1181926405.3051.0.camel@scorpion> Message-ID: <1182161035.3752.40.camel@scorpion> Le dimanche 17 juin 2007 ? 16:12 -0700, Dan Stromberg a ?crit : > > It appears that: > > 1. home to work without -d gives a connection but no video > 2. work to home without -d gives a connection but no video > 3. home to work with -d 4 does not give a connection > 4. work to home with -d 4 gives a connection and bidirectional > video > > I can do what I wanted to do by running -d 4 and using a phone from > home to ask at work to ekiga home, so I have what I wanted from ekiga. > It's slightly inconvenient, but it's workable. > > Is this a situation that is addressed in a later version of the ekiga > sources and/or dependent libraries? > > Ifnot, is there interest among the ekiga developers in using this > situation to improve ekiga? I'm willing to commit some of my time to > coming up with a decent bug report and running some tests. > > I'm using ekiga 2.0.9.both at home and work. The one at home I built > by hand, and the one at work, I built with garnome. I have never heard such a weird bug report :-) What I suggest is that we debug each problem at a time. I would suggest starting with 3. 1 and 2 do not make sense : the debug output can not change the behavior. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From lists at dcorking.com Mon Jun 18 14:16:40 2007 From: lists at dcorking.com (David Corking) Date: Mon, 18 Jun 2007 15:16:40 +0100 Subject: [Ekiga-list] Ekiga Win32 automatic builds? was Re: Ekiga on Windows, Video problem Message-ID: On 6/16/07, Vincent Luba wrote: > By the way ? Are there automatic builds of ekiga Win32 ? because > http://snapshots.seconix.com/win32/ seems to be old ? > > Yes, on SVN under ekiga/win32/ path. > Vincent, do you mean here? http://svn.gnome.org/viewcvs/ekiga/trunk/win32/ I don't see them. From vincent_luba at colombus.org Mon Jun 18 14:59:42 2007 From: vincent_luba at colombus.org (Vincent Luba) Date: Mon, 18 Jun 2007 16:59:42 +0200 Subject: [Ekiga-list] Ekiga Win32 automatic builds? was Re: Ekiga on Windows, Video problem In-Reply-To: References: Message-ID: <46769DDE.7010703@colombus.org> David Corking a ?crit : > On 6/16/07, Vincent Luba wrote: > > >> By the way ? Are there automatic builds of ekiga Win32 ? because >> http://snapshots.seconix.com/win32/ seems to be old ? >> >> Yes, on SVN under ekiga/win32/ path. >> >> > > Vincent, do you mean here? > > http://svn.gnome.org/viewcvs/ekiga/trunk/win32/ > > That's it. checkout that path to your build root cd into the buildroot than type "make"... It should build it, provided that you have installed all the build dependencies. -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Mon Jun 18 15:13:09 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Mon, 18 Jun 2007 17:13:09 +0200 Subject: [Ekiga-list] Ekiga Win32 automatic builds? was Re: Ekiga on Windows, Video problem In-Reply-To: <46769DDE.7010703@colombus.org> References: <46769DDE.7010703@colombus.org> Message-ID: 2007/6/18, Vincent Luba : > > > By the way ? Are there automatic builds of ekiga Win32 ? because > http://snapshots.seconix.com/win32/ seems to be old ? > > That's it. > checkout that path to your build root cd into the buildroot than type > "make"... It should build it, provided that you have installed all the build > dependencies. > Did I say automatic :-) ? -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From anish.kk at nestgroup.net Tue Jun 19 14:12:37 2007 From: anish.kk at nestgroup.net (Anish K. K.) Date: Tue, 19 Jun 2007 19:42:37 +0530 Subject: [Ekiga-list] video not getting while using h.263 codec plugin. Message-ID: <9A1299C7A40D7447A108107E951450CA01D8C23D@MAIL-TVM.tvm.nestgroup.net> Hi all, I added h.263 codec plugin to opal and called it from ekiga. When I tried to connect ekiga and salyens VoIP using H.263 I got log messages in salyens VoIP receiving h.263 CIF data. But I am unable to see the video. Also the cam at ekiga side got stuck up. I modified the SetVideoMediaFormats function in ekiga. Please tell me the bit rate and vq of h.263. I used the same values of h.261. I am using ekiga - 2.0.5. Also when I connected two ekiga systems with h.263 codec plugin it got connected through h.261 codec. Please tell me where I am wrong. Any guidance in this regard will be great help for me. Thanks and Regards, Anish -------------- next part -------------- An HTML attachment was scrubbed... URL: From patrick.lenders at gmail.com Wed Jun 20 05:21:26 2007 From: patrick.lenders at gmail.com (Patrick Lenders) Date: Wed, 20 Jun 2007 15:21:26 +1000 Subject: [Ekiga-list] fedora 7 Message-ID: Hi all, I moved recently to fedora7 (from FC5), and ekiga started misbehaving: - it takes minutes to connect to the sip server - crashes - poor transmission (reception is ok) Any idea will be enormously appreciated. Cheers, Patrick -- Patrick Lenders From drake.mobius at gmail.com Wed Jun 20 12:57:14 2007 From: drake.mobius at gmail.com (Drake Mobius) Date: Wed, 20 Jun 2007 08:57:14 -0400 Subject: [Ekiga-list] cannot answer calls Message-ID: <5afe5c990706200557t5ca71d84o8b676dcc0d2461c4@mail.gmail.com> Hi all, I can't seem to find anything about this in the help or the wiki.. so perhaps someone here can help! When receiving a call in the Win32 BETA, I don't seem to be able to accept. I get the dialog, I click accept, and then the phone rings half a dozen times before telling me that I have a 'missed call'. I am able to place calls successfully, however. Second, although less important: is the sluggishness due to using STUN, perhaps? I have two clients both with high speed internet connections and it takes a seemingly large amount of time for the receipient softphone to ring. Anyhow, hope somebody can help. Maybe it'll be something simple (: Drake -------------- next part -------------- An HTML attachment was scrubbed... URL: From joerg-haas at t-online.de Wed Jun 20 13:43:26 2007 From: joerg-haas at t-online.de (joerg-haas at t-online.de) Date: Wed, 20 Jun 2007 15:43:26 +0200 Subject: [Ekiga-list] as netmeeting Message-ID: <1I10T0-03bHiC0@fwd27.aul.t-online.de> hello, ekiga is often compared with netmeeting. My question: Can I operate in the same way : give somebody my IP and allow him control my appliance (or desktop) like it's possible in netmeeting? If yes which steps are essential (where is this described). In the FAQ I didn't found this covered. greetings joh From jpuydt at free.fr Wed Jun 20 13:56:43 2007 From: jpuydt at free.fr (Julien Puydt) Date: Wed, 20 Jun 2007 15:56:43 +0200 Subject: [Ekiga-list] as netmeeting In-Reply-To: <1I10T0-03bHiC0@fwd27.aul.t-online.de> References: <1I10T0-03bHiC0@fwd27.aul.t-online.de> Message-ID: <4679321B.8060008@free.fr> joerg-haas at t-online.de wrote: > ekiga is often compared with netmeeting. My question: Can I operate > in the same way : give somebody my IP and allow him control my > appliance (or desktop) like it's possible in netmeeting? If > yes which steps are essential (where is this described). In the FAQ > I didn't found this covered. Ekiga does audio+video, it doesn't do remote desktop. Besides, I hope ekiga isn't that often compared to netmeeting, as it's : (1) dead (2) not standard-compliant Snark on #ekiga From M.Keyl at tu-bs.de Wed Jun 20 14:30:14 2007 From: M.Keyl at tu-bs.de (Michael Keyl) Date: Wed, 20 Jun 2007 16:30:14 +0200 Subject: [Ekiga-list] ekiga and sipgate Message-ID: <200706201630.15099.M.Keyl@tu-bs.de> Hi all, I have tried to use ekiga with my sipgate account, however, only with limited success. When I start ekiga it registers successfully with sipgate and I can receive calls immediately after the registration. After a few minutes, however, all calls are redirected to voice mail (since I am not online), although ekiga claims that the account is still registered. The ability to make outgoing calls is not affected. Apparently this is an old problem because I have found a corresponding report in the GnomeMeeting list one year ago. Unfortunately I have not found the solution (playing with the binding_timeout parameter didn't changed anything). Is there anybody around who can help me? Many thanks in advance. Michael From ml at stdout.at Wed Jun 20 16:05:12 2007 From: ml at stdout.at (Hannes Ebner) Date: Wed, 20 Jun 2007 18:05:12 +0200 Subject: [Ekiga-list] ekiga and sipgate In-Reply-To: <200706201630.15099.M.Keyl@tu-bs.de> References: <200706201630.15099.M.Keyl@tu-bs.de> Message-ID: <46795038.5030201@stdout.at> Hi Michael, Michael Keyl wrote: > binding_timeout parameter didn't changed anything). Is there anybody around > who can help me? Many thanks in advance. I'm using Ekiga with sipgate.at and sipgate.de, both work. I configured the accounts like this: Registrar: sipgate.de (or sipgate.at) User: Your SIP-ID (7 digits in my case) Password: Your password Depending on your local network configuration (e.g. NAT) you might have to use a STUN-server: Ekiga-Preferences -> Protocols -> Network Settings -> NAT Settings NAT Traversal Method: STUN STUN Server: stun.ekiga.net Make also sure that you are using the correct network interface. Take the one which is connected to the Internet (or to the network which is connected to the Internet). Which version of Ekiga are you using? It worked for me with all 2.0.x versions. (2.0.9 fixed a few important bugs) HTH Hannes From nexon89 at gmail.com Wed Jun 20 19:51:26 2007 From: nexon89 at gmail.com (Tyler Cassidy) Date: Wed, 20 Jun 2007 13:51:26 -0600 Subject: [Ekiga-list] Webcam on Windows Message-ID: On the latest version of Ekiga for Windows all the webcam gives me is a Green rectangle and thats it. Any ideas? This is under the VideoForWindows plugin, and the only device found is Microsoft WDM Image Capture. -- -Tyler MSN: nerd at tylerc.org -------------- next part -------------- An HTML attachment was scrubbed... URL: From strombrg at gmail.com Thu Jun 21 04:41:55 2007 From: strombrg at gmail.com (Dan Stromberg) Date: Wed, 20 Jun 2007 21:41:55 -0700 Subject: [Ekiga-list] as netmeeting In-Reply-To: <4679321B.8060008@free.fr> References: <1I10T0-03bHiC0@fwd27.aul.t-online.de> <4679321B.8060008@free.fr> Message-ID: For "remote desktop", as microsoft likes to call it, you're probably better off with VNC (which is a open standard that works very well and is available in many diferent, mostly compatible, free implementations across Linux, UNIX, windows, Mac, Palm, etc.) or microsoft's remote desktop facility (which is mostly microsoft-only, and requires a special license to use). The *ix philosophy is pretty much to have one tool per task, and voice/video and remote desktop are pretty much different things. There's nothing that stops you from combining them though. On 6/20/07, Julien Puydt wrote: > > joerg-haas at t-online.de wrote: > > ekiga is often compared with netmeeting. My question: Can I operate > > in the same way : give somebody my IP and allow him control my > > appliance (or desktop) like it's possible in netmeeting? If > > yes which steps are essential (where is this described). In the FAQ > > I didn't found this covered. > > Ekiga does audio+video, it doesn't do remote desktop. > > Besides, I hope ekiga isn't that often compared to netmeeting, as it's : > (1) dead > (2) not standard-compliant > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Dan Stromberg -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Thu Jun 21 07:47:55 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 21 Jun 2007 09:47:55 +0200 Subject: [Ekiga-list] Webcam on Windows In-Reply-To: References: Message-ID: <1182412075.3727.4.camel@scorpion> Hi, Le mercredi 20 juin 2007 ? 13:51 -0600, Tyler Cassidy a ?crit : > On the latest version of Ekiga for Windows all the webcam gives me is > a Green rectangle and thats it. Any ideas? > > This is under the VideoForWindows plugin, and the only device found is > Microsoft WDM Image Capture. Can you try this snapshot : http://www.novacom.be/downloads/alcatel/ekiga-setup-2.0.10-BETA.exe It integrates the experimental DirectShow plugin from Luc Saillard. Does it work better ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Jun 21 07:48:45 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 21 Jun 2007 09:48:45 +0200 Subject: [Ekiga-list] cannot answer calls In-Reply-To: <5afe5c990706200557t5ca71d84o8b676dcc0d2461c4@mail.gmail.com> References: <5afe5c990706200557t5ca71d84o8b676dcc0d2461c4@mail.gmail.com> Message-ID: <1182412125.3727.6.camel@scorpion> Hi, Le mercredi 20 juin 2007 ? 08:57 -0400, Drake Mobius a ?crit : > Hi all, > > I can't seem to find anything about this in the help or the wiki.. so > perhaps someone here can help! > When receiving a call in the Win32 BETA, I don't seem to be able to > accept. I get the dialog, I click accept, and then the phone rings > half a dozen times before telling me that I have a 'missed call'. > I am able to place calls successfully, however. > > Second, although less important: is the sluggishness due to using > STUN, perhaps? I have two clients both with high speed internet > connections and it takes a seemingly large amount of time for the > receipient softphone to ring. > I don' t think it is stun. I have no idea what it can be. Sorry :( -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From fabrizio.lippolis at aurigainformatica.it Thu Jun 21 07:10:41 2007 From: fabrizio.lippolis at aurigainformatica.it (Fabrizio Lippolis) Date: Thu, 21 Jun 2007 09:10:41 +0200 Subject: [Ekiga-list] a few issues Message-ID: Hi list, I have upgrade Ekiga to 2.0.9 on my Debian box, now when I am calling regular phones via either voipstunt or voipcheap an exclamation mark is displayed inside a red bullet in the Ekiga icon in the Gnome systray. Other than this, the call procedes smoothly. What does the exclamation mark mean? When I am in a call and I want to close it I push the button next to the text field containing the SIP address. The call takes some time to terminate and in the meantime Ekiga looks frozen. It doesn't bother much but it would be nice to make it more responsive. This happened even before upgrading. Same thing when I quit Ekiga, waits a little, then quits. Anyway I am becoming a big fan of this software, and I want to congratulate with the developers for their effort. Best regards, Fabrizio From dsandras at seconix.com Thu Jun 21 09:46:50 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 21 Jun 2007 11:46:50 +0200 Subject: [Ekiga-list] Preview of Ekiga 2.0.10 for WIN32 with DirectShow Support Message-ID: <1182419210.3727.22.camel@scorpion> Hello, Here is the correct URL : http://ekiga.net/misc/ekiga-setup-2.0.10-BETA.exe Please test, it is a preview of 2.0.10. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From M.Keyl at tu-bs.de Thu Jun 21 10:31:47 2007 From: M.Keyl at tu-bs.de (Michael Keyl) Date: Thu, 21 Jun 2007 12:31:47 +0200 Subject: [Ekiga-list] ekiga and sipgate In-Reply-To: <46795038.5030201@stdout.at> References: <200706201630.15099.M.Keyl@tu-bs.de> <46795038.5030201@stdout.at> Message-ID: <200706211231.47747.M.Keyl@tu-bs.de> On Wednesday 20 June 2007 18:05, Hannes Ebner wrote: > Hi Michael, > > Michael Keyl wrote: > > binding_timeout parameter didn't changed anything). Is there anybody > > around who can help me? Many thanks in advance. > > I'm using Ekiga with sipgate.at and sipgate.de, both work. Thank you for your answer. I think I have figured out the problem. Apparently the firewall was misconfigured: All interfaces were declared as "external" although only dsl0 is external (and not eth0 to which the modem is attached). This probably caused some comunication errors between my computer and the dsl modem. I am still wondering why no other application encountered any problems and why the ekiga.net account worked properly. Nevertheless, since I have changed these settings everything seems to work properly. From netmaxd at gmail.com Thu Jun 21 07:27:09 2007 From: netmaxd at gmail.com (netmaxd) Date: Thu, 21 Jun 2007 09:27:09 +0200 Subject: [Ekiga-list] Help for Ekiga in french ! Message-ID: <467A284D.2040704@gmail.com> Hi ! You search the assistance or a documentation in French for Ekiga? You use K/Ubuntu or other ? You have an excellent documentation on the Ubuntu-Fr wiki. Visit: http://doc.ubuntu-fr.org/ekiga Ps: here, is a little plug for Ekiga Windows 2.0.10 http://forum.kubuntu-fr.org/viewtopic.php?id=128654 Traduc: Vous rechercher de l'aide ou de la documentation en francais pour Ekiga ? Vous utilis? K/Ubuntu ou autre ? Il y as une excellente documentation sur le wiki d'Ubuntu-Fr Voir sur: http://doc.ubuntu-fr.org/ekiga ps: Afflicted to have written part of this French message, but I believe that it is well of informed the users for the assistance in French on Ekiga Good Day for All ! Marcel Dess From sevmek at free.fr Thu Jun 21 14:49:16 2007 From: sevmek at free.fr (yannick) Date: Thu, 21 Jun 2007 16:49:16 +0200 Subject: [Ekiga-list] Help for Ekiga in french ! In-Reply-To: <467A284D.2040704@gmail.com> References: <467A284D.2040704@gmail.com> Message-ID: <1182437356.24030.6.camel@achille> Hi Marcel, Le jeudi 21 juin 2007 ? 09:27 +0200, netmaxd a ?crit : > Hi ! > You search the assistance or a documentation in French for Ekiga? > You use K/Ubuntu or other ? > You have an excellent documentation on the Ubuntu-Fr wiki. > Visit: http://doc.ubuntu-fr.org/ekiga I wrote it. My nick on the french ubuntu forum is yannick at AMD64. > > Ps: here, is a little plug for Ekiga Windows 2.0.10 > http://forum.kubuntu-fr.org/viewtopic.php?id=128654 Thank you for the ad. Thank you for the support. Regards, Yannick > > Traduc: > Vous rechercher de l'aide ou de la documentation en francais pour Ekiga ? > Vous utilis? K/Ubuntu ou autre ? > Il y as une excellente documentation sur le wiki d'Ubuntu-Fr > Voir sur: http://doc.ubuntu-fr.org/ekiga > > ps: > Afflicted to have written part of this French message, > but I believe that it is well of informed the users for > the assistance in French on Ekiga > > Good Day for All ! > Marcel Dess > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dsandras at seconix.com Thu Jun 21 16:29:41 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 21 Jun 2007 18:29:41 +0200 Subject: [Ekiga-list] a few issues In-Reply-To: References: Message-ID: <1182443381.30329.2.camel@scorpion> Hi, Le jeudi 21 juin 2007 ? 09:10 +0200, Fabrizio Lippolis a ?crit : > Hi list, > > I have upgrade Ekiga to 2.0.9 on my Debian box, now when I am calling > regular phones via either voipstunt or voipcheap an exclamation mark is > displayed inside a red bullet in the Ekiga icon in the Gnome systray. I do not know what it is, there is no code in Ekiga to display exclamation marks. > Other than this, the call procedes smoothly. What does the exclamation > mark mean? I don't know. Probably you do not use the standard icon set. > When I am in a call and I want to close it I push the button next to the > text field containing the SIP address. The call takes some time to > terminate and in the meantime Ekiga looks frozen. It doesn't bother much > but it would be nice to make it more responsive. This happened even > before upgrading. > > Same thing when I quit Ekiga, waits a little, then quits. There is a limitation in Ekiga 2.0.x : dealing with the calls history takes much time because it stores 300 calls and GConf is not really optimized for that. I suggest you to empty each section of the history : Missed Calls, Placed Calls, Received Calls, you have to hit 3 times the "Clear" button. It should work better after this. > Anyway I am becoming a big fan of this software, and I want to > congratulate with the developers for their effort. Thanks :) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From nexon89 at gmail.com Thu Jun 21 16:47:10 2007 From: nexon89 at gmail.com (Tyler Cassidy) Date: Thu, 21 Jun 2007 10:47:10 -0600 Subject: [Ekiga-list] Webcam on Windows In-Reply-To: <1182412075.3727.4.camel@scorpion> References: <1182412075.3727.4.camel@scorpion> Message-ID: On 6/21/07, Damien Sandras wrote: > > Hi, > > Le mercredi 20 juin 2007 ? 13:51 -0600, Tyler Cassidy a ?crit : > > On the latest version of Ekiga for Windows all the webcam gives me is > > a Green rectangle and thats it. Any ideas? > > > > This is under the VideoForWindows plugin, and the only device found is > > Microsoft WDM Image Capture. > > > Can you try this snapshot : > http://www.novacom.be/downloads/alcatel/ekiga-setup-2.0.10-BETA.exe > > It integrates the experimental DirectShow plugin from Luc Saillard. Will Try later on today, thanks :) -Tyler Does it work better ? > > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- -Tyler MSN: nerd at tylerc.org -------------- next part -------------- An HTML attachment was scrubbed... URL: From nexon89 at gmail.com Fri Jun 22 01:35:44 2007 From: nexon89 at gmail.com (Tyler Cassidy) Date: Thu, 21 Jun 2007 19:35:44 -0600 Subject: [Ekiga-list] Webcam on Windows In-Reply-To: References: <1182412075.3727.4.camel@scorpion> Message-ID: On 6/21/07, Tyler Cassidy wrote: > > > > On 6/21/07, Damien Sandras wrote: > > > > Hi, > > > > Le mercredi 20 juin 2007 ? 13:51 -0600, Tyler Cassidy a ?crit : > > > On the latest version of Ekiga for Windows all the webcam gives me is > > > a Green rectangle and thats it. Any ideas? > > > > > > This is under the VideoForWindows plugin, and the only device found is > > > > > Microsoft WDM Image Capture. > > > > Can you try this snapshot : > > http://www.novacom.be/downloads/alcatel/ekiga-setup-2.0.10-BETA.exe > > > > It integrates the experimental DirectShow plugin from Luc Saillard. > > > > I confirm that the DirectShow plugin works for a Logitech Quickcam. Thanks > :) > > -Tyler > > > Does it work better ? > > > > -- > > _ Damien Sandras > > (o- > > //\ Ekiga Softphone : http://www.ekiga.org/ > > v_/_ NOVACOM : http://www.novacom.be/ > > FOSDEM : http://www.fosdem.org/ > > SIP Phone : sip:dsandras at ekiga.net > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > -- > -Tyler > > MSN: nerd at tylerc.org > -- -Tyler MSN: nerd at tylerc.org -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Fri Jun 22 07:45:56 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 22 Jun 2007 09:45:56 +0200 Subject: [Ekiga-list] Webcam on Windows In-Reply-To: References: <1182412075.3727.4.camel@scorpion> Message-ID: <1182498356.3762.0.camel@scorpion> Le jeudi 21 juin 2007 ? 19:35 -0600, Tyler Cassidy a ?crit : [...] > It integrates the experimental DirectShow plugin from > Luc Saillard. > > > I confirm that the DirectShow plugin works for a Logitech > Quickcam. Thanks :) Excellent news. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From uhe at stahl-groeditz.de Fri Jun 22 10:15:17 2007 From: uhe at stahl-groeditz.de (Uwe Hentzschel) Date: Fri, 22 Jun 2007 12:15:17 +0200 Subject: [Ekiga-list] Webcam on Windows In-Reply-To: <1182498356.3762.0.camel@scorpion> References: <1182412075.3727.4.camel@scorpion> <1182498356.3762.0.camel@scorpion> Message-ID: <20070622101517.GA19839@stahl-groeditz.de> Hello ! The DirectShow plugin works also for a Labtec notebook webcam. -uhe On Fri, 22 Jun 2007, Damien Sandras wrote: > Le jeudi 21 juin 2007 ? 19:35 -0600, Tyler Cassidy a ?crit : > > [...] > > > > It integrates the experimental DirectShow plugin from > > Luc Saillard. > > > > > > I confirm that the DirectShow plugin works for a Logitech > > Quickcam. Thanks :) > > Excellent news. > > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Uwe Hentzschel Systemingenieur Schmiedewerke Gr?ditz GmbH Riesaer Stra?e 1 ? 01609 Gr?ditz Telefon 035263 62-551 ? Fax 035263 62-642 uwe.hentzschel at stahl-groeditz.de ? www.stahl-groeditz.de PGP/GPG Key ID: 0x75A2E7F6 From dsandras at seconix.com Fri Jun 22 10:28:17 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 22 Jun 2007 12:28:17 +0200 Subject: [Ekiga-list] Webcam on Windows In-Reply-To: <20070622101517.GA19839@stahl-groeditz.de> References: <1182412075.3727.4.camel@scorpion> <1182498356.3762.0.camel@scorpion> <20070622101517.GA19839@stahl-groeditz.de> Message-ID: <1182508097.3762.9.camel@scorpion> Le vendredi 22 juin 2007 ? 12:15 +0200, Uwe Hentzschel a ?crit : > Hello ! > > The DirectShow plugin works also for a Labtec notebook webcam. Excellent news ! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From netmaxd at gmail.com Fri Jun 22 05:26:30 2007 From: netmaxd at gmail.com (netmaxd) Date: Fri, 22 Jun 2007 07:26:30 +0200 Subject: [Ekiga-list] Webcam on Windows In-Reply-To: <1182508097.3762.9.camel@scorpion> References: <1182412075.3727.4.camel@scorpion> <1182498356.3762.0.camel@scorpion> <20070622101517.GA19839@stahl-groeditz.de> <1182508097.3762.9.camel@scorpion> Message-ID: <467B5D86.9040500@gmail.com> Damien Sandras a ?crit : > Le vendredi 22 juin 2007 ? 12:15 +0200, Uwe Hentzschel a ?crit : > >> Hello ! >> >> The DirectShow plugin works also for a Labtec notebook webcam. >> > > The DirectShow plugin works also for a Labtec (Logitech Express driver Windows2000Pro) > Excellent news ! > From netmaxd at gmail.com Fri Jun 22 05:37:38 2007 From: netmaxd at gmail.com (netmaxd) Date: Fri, 22 Jun 2007 07:37:38 +0200 Subject: [Ekiga-list] Ekiga 2.0.10 for Win - Virtualbox In-Reply-To: <467B5D86.9040500@gmail.com> References: <1182412075.3727.4.camel@scorpion> <1182498356.3762.0.camel@scorpion> <20070622101517.GA19839@stahl-groeditz.de> <1182508097.3762.9.camel@scorpion> <467B5D86.9040500@gmail.com> Message-ID: <467B6022.3010709@gmail.com> Hi ! I tested Ekiga 2.0.10 beta for Windows in Kubuntu --Virtualbox (Win2000Pro) I call echo test (500 at ekiga.net) and work good ! Thank you for your good job :-) Marcel From michel.memeteau at gmail.com Fri Jun 22 11:53:31 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Fri, 22 Jun 2007 13:53:31 +0200 Subject: [Ekiga-list] Amarok coders try on VOIP ... skype wins ? Message-ID: Interresting review for VOIP on linux ... ekiga finish quite well it seems http://amarok.kde.org/blog/archives/424-VoIP-Screw-it!.html -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Fri Jun 22 12:47:01 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 22 Jun 2007 14:47:01 +0200 Subject: [Ekiga-list] Ekiga 2.0.10 for Win - Virtualbox In-Reply-To: <467B6022.3010709@gmail.com> References: <1182412075.3727.4.camel@scorpion> <1182498356.3762.0.camel@scorpion> <20070622101517.GA19839@stahl-groeditz.de> <1182508097.3762.9.camel@scorpion> <467B5D86.9040500@gmail.com> <467B6022.3010709@gmail.com> Message-ID: <1182516421.3762.11.camel@scorpion> Le vendredi 22 juin 2007 ? 07:37 +0200, netmaxd a ?crit : > Hi ! > > I tested Ekiga 2.0.10 beta for Windows in Kubuntu --Virtualbox (Win2000Pro) > I call echo test (500 at ekiga.net) and work good ! > All of your news are excellent news ! It seems the directshow plugin really does a good job :-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Fri Jun 22 12:49:27 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 22 Jun 2007 14:49:27 +0200 Subject: [Ekiga-list] Amarok coders try on VOIP ... skype wins ? In-Reply-To: References: Message-ID: <1182516567.3762.14.camel@scorpion> Le vendredi 22 juin 2007 ? 13:53 +0200, michel memeteau a ?crit : > Interresting review for VOIP on linux ... ekiga finish quite well it > seems > > http://amarok.kde.org/blog/archives/424-VoIP-Screw-it!.html If the UI is the only problem they can find, then I think 3.00 will please them. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From laurentp at wp.pl Fri Jun 22 13:02:02 2007 From: laurentp at wp.pl (W.P.) Date: Fri, 22 Jun 2007 15:02:02 +0200 Subject: [Ekiga-list] Amarok coders try on VOIP ... skype wins ? In-Reply-To: <1182516567.3762.14.camel@scorpion> References: <1182516567.3762.14.camel@scorpion> Message-ID: <467BC84A.5050008@wp.pl> U?ytkownik Damien Sandras napisa?: >Le vendredi 22 juin 2007 ? 13:53 +0200, michel memeteau a ?crit : > > >>Interresting review for VOIP on linux ... ekiga finish quite well it >>seems >> >>http://amarok.kde.org/blog/archives/424-VoIP-Screw-it!.html >> >> > >If the UI is the only problem they can find, then I think 3.00 will >please them. > > For me (personally) GUI at the moment is OK, much better than ex, XTenLite which tries to mimic phone apparatus. Ekiga IS a PROGRAM, and looks like program ;) ;) W.P. From dsandras at seconix.com Fri Jun 22 13:49:02 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 22 Jun 2007 15:49:02 +0200 Subject: [Ekiga-list] Amarok coders try on VOIP ... skype wins ? In-Reply-To: <467BC84A.5050008@wp.pl> References: <1182516567.3762.14.camel@scorpion> <467BC84A.5050008@wp.pl> Message-ID: <1182520142.3762.16.camel@scorpion> Le vendredi 22 juin 2007 ? 15:02 +0200, W.P. a ?crit : > U?ytkownik Damien Sandras napisa?: > > >Le vendredi 22 juin 2007 ? 13:53 +0200, michel memeteau a ?crit : > > > > > >>Interresting review for VOIP on linux ... ekiga finish quite well it > >>seems > >> > >>http://amarok.kde.org/blog/archives/424-VoIP-Screw-it!.html > >> > >> > > > >If the UI is the only problem they can find, then I think 3.00 will > >please them. > > > > > For me (personally) GUI at the moment is OK, much better than ex, > XTenLite which tries to mimic phone apparatus. > Ekiga IS a PROGRAM, and looks like program ;) ;) > :-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From lists at dcorking.com Fri Jun 22 14:26:40 2007 From: lists at dcorking.com (David Corking) Date: Fri, 22 Jun 2007 15:26:40 +0100 Subject: [Ekiga-list] Amarok coders try on VOIP ... skype wins ? In-Reply-To: <1182520142.3762.16.camel@scorpion> References: <1182516567.3762.14.camel@scorpion> <467BC84A.5050008@wp.pl> <1182520142.3762.16.camel@scorpion> Message-ID: On 6/22/07, Damien Sandras wrote: > > >>Interresting review for VOIP on linux ... ekiga finish quite well it > > >>seems > > >> > > >>http://amarok.kde.org/blog/archives/424-VoIP-Screw-it!.html > > > > > >If the UI is the only problem they can find, then I think 3.00 will > > >please them. It seems the other problem was "robot voices in conference rooms". I suppose it would be nice to know whose conference server they used, and which codecs were in use. -- David From dsandras at seconix.com Fri Jun 22 15:14:37 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 22 Jun 2007 17:14:37 +0200 Subject: [Ekiga-list] Amarok coders try on VOIP ... skype wins ? In-Reply-To: References: <1182516567.3762.14.camel@scorpion> <467BC84A.5050008@wp.pl> <1182520142.3762.16.camel@scorpion> Message-ID: <1182525277.32099.0.camel@scorpion> Le vendredi 22 juin 2007 ? 15:26 +0100, David Corking a ?crit : > On 6/22/07, Damien Sandras wrote: > > > >>Interresting review for VOIP on linux ... ekiga finish quite well it > > > >>seems > > > >> > > > >>http://amarok.kde.org/blog/archives/424-VoIP-Screw-it!.html > > > > > > > >If the UI is the only problem they can find, then I think 3.00 will > > > >please them. > > It seems the other problem was "robot voices in conference rooms". > > I suppose it would be nice to know whose conference server they used, > and which codecs were in use. I think in this case the problem is the user... (unfortunately). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From steve at gammafactor.com Fri Jun 22 16:57:24 2007 From: steve at gammafactor.com (Steven R Anderson) Date: Fri, 22 Jun 2007 11:57:24 -0500 Subject: [Ekiga-list] "Registration Failed" and DirectShow plugin for debian Message-ID: <467BFF74.3020205@gammafactor.com> Hi, I'm running Ekiga 2.0.9 on Debian Etch. I've created my Ekiga account, and can log into the website, but when I start Ekiga I see a message at the bottom: "Registration failed: Not Acceptable." I've tried a number of things, but still get this message. Also, I'd like to know if there's a Debian version of the DirectShow plugin. Thanks! ~Steve From fonz at siol.net Fri Jun 22 17:12:12 2007 From: fonz at siol.net (Jure Petrovic) Date: Fri, 22 Jun 2007 19:12:12 +0200 Subject: [Ekiga-list] Amarok coders try on VOIP ... skype wins ? In-Reply-To: References: Message-ID: <1182532332.2283.1.camel@desktop.local.si> Hello, I don't know if I'd call that an interesting review. It's not even funny. And it's not something i'd expect from coders of Amarok... Regards, Jure On Fri, 2007-06-22 at 13:53 +0200, michel memeteau wrote: > Interresting review for VOIP on linux ... ekiga finish quite well it > seems > > > http://amarok.kde.org/blog/archives/424-VoIP-Screw-it!.html > > -- > %<------------------------------------------------------->% > Michel memeteau > VOIP | Visio: sip:freechelmi at gizmoproject.com > 0491886375 0624808051 > jabber/GoogleTalk : freechelmi at jabber.fr > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From sevmek at free.fr Fri Jun 22 17:32:16 2007 From: sevmek at free.fr (yannick) Date: Fri, 22 Jun 2007 19:32:16 +0200 Subject: [Ekiga-list] "Registration Failed" and DirectShow plugin for debian In-Reply-To: <467BFF74.3020205@gammafactor.com> References: <467BFF74.3020205@gammafactor.com> Message-ID: <1182533536.24030.14.camel@achille> Le vendredi 22 juin 2007 ? 11:57 -0500, Steven R Anderson a ?crit : > Hi, > > I'm running Ekiga 2.0.9 on Debian Etch. I've created my Ekiga account, > and can log into the website, but when I start Ekiga I see a message at > the bottom: "Registration failed: Not Acceptable." I've tried a number > of things, but still get this message. > > Also, I'd like to know if there's a Debian version of the DirectShow plugin. http://en.wikipedia.org/wiki/DirectShow I doubt there is a DirectShow plugin for any flavor of Linux... Regards, Yannick > > Thanks! > > ~Steve > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From jacortesmahmud at gmail.com Fri Jun 22 22:21:05 2007 From: jacortesmahmud at gmail.com (Jorge A. Cortes Mahmud) Date: Fri, 22 Jun 2007 17:21:05 -0500 Subject: [Ekiga-list] same problem "registration failed" Message-ID: Hi, i have been seeing the mail archives and it seams that this problem has not been resolved, im new and thats why i put this problem in another thread, i have been seeing the problem in http://mail.gnome.org/archives/ekiga-list/2007-June/msg00151.html and mine is the same. i do not know what im doing wrong, but i want very badly that my ekiga works, i have debian testing y Ekiga 2.0,3 the output of the problem are: $ ekiga -d 4 2> ekigaRun.txt $ less ekigaRun.txt |egrep ?rror 2007/06/22 15:12:51.987 0:24.266 Opal Listener:844dda8 Listen UDP select error: Llamada al sistema interrumpida 2007/06/22 15:12:51.992 0:24.271 SIP Transport:8370ab0 OpalUDP Error on connection read select. nevertheless here i put the ekigarun.txt y thanks for your attention. -- http://slcolombia.org El sitio del Software LIbre en Colombia. http://wiki.slec.net Software Libre y Educacion en Colombia. -------------- next part -------------- 2007/06/22 15:12:28.160 0:00.449 ekiga Detected audio plugins: ALSA 2007/06/22 15:12:28.170 0:00.449 ekiga Detected video plugins: Picture,V4L 2007/06/22 15:12:28.170 0:00.449 ekiga Detected audio plugins: ALSA 2007/06/22 15:12:28.170 0:00.449 ekiga Detected video plugins: Picture,V4L 2007/06/22 15:12:28.186 0:00.466 ekiga Detected the following audio input devices: Intel ICH5,Default with plugin ALSA 2007/06/22 15:12:28.187 0:00.466 ekiga Detected the following audio output devices: Intel ICH5,Default with plugin ALSA 2007/06/22 15:12:28.187 0:00.466 ekiga Detected the following video input devices: No se ha encontrado ning??n dispositivo with plugin V4L 2007/06/22 15:12:28.187 0:00.466 ekiga Detected the following audio input devices: Intel ICH5,Default with plugin ALSA 2007/06/22 15:12:28.187 0:00.466 ekiga Detected the following audio output devices: Intel ICH5,Default with plugin ALSA 2007/06/22 15:12:28.187 0:00.466 ekiga Detected the following video input devices: No se ha encontrado ning??n dispositivo with plugin V4L 2007/06/22 15:12:28.671 0:00.950 ekiga Ekiga version 2.0.3 2007/06/22 15:12:28.671 0:00.950 ekiga OPAL version 2.2.3 2007/06/22 15:12:28.671 0:00.950 ekiga PWLIB version 1.10.2 2007/06/22 15:12:28.671 0:00.950 ekiga GNOME support enabled 2007/06/22 15:12:28.671 0:00.950 ekiga Fullscreen support enabled 2007/06/22 15:12:28.671 0:00.950 ekiga DBUS support disabled 2007/06/22 15:12:28.675 0:00.954 ekiga Set TCP port range to 30000:30010 2007/06/22 15:12:28.675 0:00.954 ekiga Set RTP port range to 5000:5059 2007/06/22 15:12:28.675 0:00.954 ekiga Set UDP port range to 5060:5100 2007/06/22 15:12:28.675 0:00.954 ekiga OpalEP Created endpoint: h323 2007/06/22 15:12:28.676 0:00.955 ekiga H323 Created endpoint. 2007/06/22 15:12:28.677 0:00.956 ekiga OpalMan Added route "pc:.*=h323:" 2007/06/22 15:12:28.677 0:00.956 ekiga OpalEP Created endpoint: sip 2007/06/22 15:12:28.677 0:00.956 ekiga SIP Created endpoint. 2007/06/22 15:12:28.678 0:00.957 ekiga OpalMan Added route "pc:.*=sip:" 2007/06/22 15:12:28.678 0:00.957 ekiga OpalEP Created endpoint: pc 2007/06/22 15:12:28.679 0:00.958 ekiga PCSS Created PC sound system endpoint. 2007/06/22 15:12:28.679 0:00.958 ekiga OpalMan Added route "h323:.*=pc:" 2007/06/22 15:12:28.679 0:00.958 ekiga OpalMan Added route "sip:.*=pc:" 2007/06/22 15:12:28.696 0:00.975 Opal Listener:844d4f8 Listen Started listening thread on tcp$190.84.19.166:1720 2007/06/22 15:12:28.713 0:00.992 Opal Listener:844d4f8 Listen Waiting on socket accept on tcp$190.84.19.166:1720 2007/06/22 15:12:28.713 0:00.992 Opal Listener:844dda8 Listen Started listening thread on udp$190.84.19.166:5060 2007/06/22 15:12:28.713 0:00.992 Opal Listener:844dda8 Listen Waiting on UDP packet on udp$190.84.19.166:5060 2007/06/22 15:12:28.909 0:01.188 GMAccounts...t:08450b10 OpalUDP Binding to interface: 190.84.19.166:32808 2007/06/22 15:12:28.909 0:01.188 GMAccounts...t:08450b10 SIP Created transport udp$0.0.0.0 2007/06/22 15:12:28.909 0:01.188 GMAccounts...t:08450b10 OpalUDP Started connect to 86.64.162.35:5060 2007/06/22 15:12:28.910 0:01.189 GMAccounts...t:08450b10 OpalUDP Connect on pre-bound interface: 190.84.19.166 2007/06/22 15:12:28.910 0:01.189 GMAccounts...t:08450b10 SIP Created Transport for Registrar udp$86.64.162.35:5060 2007/06/22 15:12:28.913 0:01.192 GMAccounts...t:08450b10 SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 1 REGISTER Via: SIP/2.0/UDP 190.84.19.166:5061;branch=z9hG4bK5c4fe791-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 From: ;tag=7e41e791-6a1f-dc11-843b-001111cd8eb7 Call-ID: 40c6e691-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:28.914 0:01.193 SIP Transport:84d9ae0 SIP Read thread started. 2007/06/22 15:12:28.914 0:01.193 SIP Transport:84d9ae0 SIP Waiting for PDU on udp$86.64.162.35:5060 2007/06/22 15:12:28.935 0:01.214 GMAccounts...t:08450b10 OpalUDP Binding to interface: 190.84.19.166:32808 2007/06/22 15:12:28.935 0:01.214 GMAccounts...t:08450b10 SIP Created transport udp$0.0.0.0 2007/06/22 15:12:28.935 0:01.214 GMAccounts...t:08450b10 OpalUDP Started connect to 86.64.162.35:5060 2007/06/22 15:12:28.935 0:01.214 GMAccounts...t:08450b10 OpalUDP Connect on pre-bound interface: 190.84.19.166 2007/06/22 15:12:28.936 0:01.215 GMAccounts...t:08450b10 SIP Created Transport for Registrar udp$86.64.162.35:5060 2007/06/22 15:12:28.938 0:01.217 GMAccounts...t:08450b10 SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:JorgeCortes at ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 190.84.19.166:5062;branch=z9hG4bK401ceb91-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 From: ;tag=fc0feb91-6a1f-dc11-843b-001111cd8eb7 Call-ID: a8c8ea91-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:28.938 0:01.217 SIP Transport:8370ab0 SIP Read thread started. 2007/06/22 15:12:28.938 0:01.217 SIP Transport:8370ab0 SIP Waiting for PDU on udp$86.64.162.35:5060 2007/06/22 15:12:29.910 0:02.189 Housekeeper SIP Transaction 1 REGISTER timeout, making retry 1 2007/06/22 15:12:29.911 0:02.190 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 1 REGISTER Via: SIP/2.0/UDP 190.84.19.166:5061;branch=z9hG4bK5c4fe791-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 From: ;tag=7e41e791-6a1f-dc11-843b-001111cd8eb7 Call-ID: 40c6e691-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:29.911 0:02.190 Housekeeper SIP Transaction 2 SUBSCRIBE timeout, making retry 1 2007/06/22 15:12:29.911 0:02.190 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:JorgeCortes at ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 190.84.19.166:5062;branch=z9hG4bK401ceb91-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 From: ;tag=fc0feb91-6a1f-dc11-843b-001111cd8eb7 Call-ID: a8c8ea91-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:30.488 0:02.767 SIP Transport:84d9ae0 SIP PDU Received on udp$86.64.162.35:5060 SIP/2.0 401 Unauthorized CSeq: 1 REGISTER Via: SIP/2.0/UDP 190.84.19.166:5061;branch=z9hG4bK5c4fe791-6a1f-dc11-843b-001111cd8eb7;rport=5061 Server: Sip EXpress router (0.9.6 (i386/linux)) From: ;tag=7e41e791-6a1f-dc11-843b-001111cd8eb7 Call-ID: 40c6e691-6a1f-dc11-843b-001111cd8eb7 at recognizer To: ;tag=12d18c5009a2de32fca8ae9d70ad0321.f281 Warning: 392 86.64.162.35:5060 "Noisy feedback tells: pid=11100 req_src_ip=190.84.19.166 req_src_port=5061 in_uri=sip:ekiga.net out_uri=sip:ekiga.net via_cnt==1" Content-Length: 0 WWW-Authenticate: Digest realm="ekiga.net", nonce="467c3135f43e969cb868f1e82f95571009a60c10", qop="auth" 2007/06/22 15:12:30.488 0:02.767 SIP Transport:84d9ae0 SIP Transaction 1 REGISTER completed. 2007/06/22 15:12:30.488 0:02.767 SIP Transport:84d9ae0 OpalUDP Ended connect, selecting 190.84.19.166:5061 2007/06/22 15:12:30.489 0:02.768 SIP Transport:84d9ae0 SIP Received Authentication Required response 2007/06/22 15:12:30.490 0:02.769 SIP Transport:84d9ae0 SIP Adding authentication information 2007/06/22 15:12:30.491 0:02.770 SIP Transport:84d9ae0 SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 3 REGISTER Via: SIP/2.0/UDP 190.84.19.166:5061;branch=z9hG4bKd61ad892-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 Authorization: Digest username="JorgeCortes", realm="ekiga.net", nonce="467c3135f43e969cb868f1e82f95571009a60c10", uri="sip:ekiga.net", algorithm=md5, response="6459752466cea022392a88623cf121d6" From: ;tag=7e41e791-6a1f-dc11-843b-001111cd8eb7 Call-ID: 40c6e691-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:30.491 0:02.770 SIP Transport:84d9ae0 SIP Waiting for PDU on udp$86.64.162.35:5060 2007/06/22 15:12:30.913 0:03.192 Housekeeper SIP Transaction 2 SUBSCRIBE timeout, making retry 2 2007/06/22 15:12:30.913 0:03.192 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:JorgeCortes at ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 190.84.19.166:5062;branch=z9hG4bK401ceb91-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 From: ;tag=fc0feb91-6a1f-dc11-843b-001111cd8eb7 Call-ID: a8c8ea91-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:30.993 0:03.272 Housekeeper SIP Transaction 3 REGISTER timeout, making retry 1 2007/06/22 15:12:30.993 0:03.272 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 3 REGISTER Via: SIP/2.0/UDP 190.84.19.166:5061;branch=z9hG4bKd61ad892-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 Authorization: Digest username="JorgeCortes", realm="ekiga.net", nonce="467c3135f43e969cb868f1e82f95571009a60c10", uri="sip:ekiga.net", algorithm=md5, response="6459752466cea022392a88623cf121d6" From: ;tag=7e41e791-6a1f-dc11-843b-001111cd8eb7 Call-ID: 40c6e691-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:31.493 0:03.772 Housekeeper SIP Set state Terminated_Success for transaction 1 REGISTER 2007/06/22 15:12:31.993 0:04.272 Housekeeper SIP Transaction 3 REGISTER timeout, making retry 2 2007/06/22 15:12:31.993 0:04.272 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 3 REGISTER Via: SIP/2.0/UDP 190.84.19.166:5061;branch=z9hG4bKd61ad892-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 Authorization: Digest username="JorgeCortes", realm="ekiga.net", nonce="467c3135f43e969cb868f1e82f95571009a60c10", uri="sip:ekiga.net", algorithm=md5, response="6459752466cea022392a88623cf121d6" From: ;tag=7e41e791-6a1f-dc11-843b-001111cd8eb7 Call-ID: 40c6e691-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:32.913 0:05.192 Housekeeper SIP Transaction 2 SUBSCRIBE timeout, making retry 3 2007/06/22 15:12:32.913 0:05.192 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:JorgeCortes at ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 190.84.19.166:5062;branch=z9hG4bK401ceb91-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 From: ;tag=fc0feb91-6a1f-dc11-843b-001111cd8eb7 Call-ID: a8c8ea91-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:33.857 0:06.136 Housekeeper SIP Set state Terminated_Timeout for transaction 2 SUBSCRIBE 2007/06/22 15:12:33.993 0:06.272 Housekeeper SIP Transaction 3 REGISTER timeout, making retry 3 2007/06/22 15:12:33.993 0:06.272 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 3 REGISTER Via: SIP/2.0/UDP 190.84.19.166:5061;branch=z9hG4bKd61ad892-6a1f-dc11-843b-001111cd8eb7;rport User-Agent: Ekiga/2.0.3 Authorization: Digest username="JorgeCortes", realm="ekiga.net", nonce="467c3135f43e969cb868f1e82f95571009a60c10", uri="sip:ekiga.net", algorithm=md5, response="6459752466cea022392a88623cf121d6" From: ;tag=7e41e791-6a1f-dc11-843b-001111cd8eb7 Call-ID: 40c6e691-6a1f-dc11-843b-001111cd8eb7 at recognizer To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/22 15:12:36.493 0:08.772 Housekeeper SIP Set state Terminated_Timeout for transaction 3 REGISTER 2007/06/22 15:12:51.964 0:24.243 ekiga Listen Stopping listening thread on tcp$190.84.19.166:1720 2007/06/22 15:12:51.966 0:24.245 ekiga H323 Deleted endpoint. 2007/06/22 15:12:51.966 0:24.245 ekiga OpalEP h323 endpoint destroyed. 2007/06/22 15:12:51.966 0:24.245 ekiga Listen Stopping listening thread on udp$190.84.19.166:5060 2007/06/22 15:12:51.987 0:24.266 Opal Listener:844dda8 Listen UDP select error: Llamada al sistema interrumpida 2007/06/22 15:12:51.991 0:24.270 ekiga SIP Transaction 1 REGISTER destroyed. 2007/06/22 15:12:51.991 0:24.270 ekiga SIP Transaction 3 REGISTER destroyed. 2007/06/22 15:12:51.991 0:24.270 ekiga Opal Transport clean up on termination 2007/06/22 15:12:51.991 0:24.270 ekiga OpalUDP Close 2007/06/22 15:12:51.991 0:24.270 ekiga Opal Transport Close 2007/06/22 15:12:51.991 0:24.270 SIP Transport:84d9ae0 SIP Read thread finished. 2007/06/22 15:12:51.992 0:24.271 ekiga SIP Transaction 2 SUBSCRIBE destroyed. 2007/06/22 15:12:51.992 0:24.271 ekiga Opal Transport clean up on termination 2007/06/22 15:12:51.992 0:24.271 ekiga OpalUDP Close 2007/06/22 15:12:51.992 0:24.271 SIP Transport:8370ab0 OpalUDP Error on connection read select. 2007/06/22 15:12:51.992 0:24.271 SIP Transport:8370ab0 SIP Read thread finished. 2007/06/22 15:12:52.007 0:24.286 ekiga SIP Deleted endpoint. 2007/06/22 15:12:52.007 0:24.286 ekiga OpalEP sip endpoint destroyed. 2007/06/22 15:12:52.007 0:24.286 ekiga PCSS Deleted PC sound system endpoint. 2007/06/22 15:12:52.007 0:24.286 ekiga OpalEP pc endpoint destroyed. 2007/06/22 15:12:52.007 0:24.286 ekiga OpalMan Deleted manager. From dsandras at seconix.com Sat Jun 23 18:29:45 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 23 Jun 2007 20:29:45 +0200 Subject: [Ekiga-list] same problem "registration failed" In-Reply-To: References: Message-ID: <1182623385.4309.6.camel@scorpion> Hi, Le vendredi 22 juin 2007 ? 17:21 -0500, Jorge A. Cortes Mahmud a ?crit : > Hi, i have been seeing the mail archives and it seams that this > problem has not been resolved, im new and thats why i put this problem > in another thread, i have been seeing the problem in > http://mail.gnome.org/archives/ekiga-list/2007-June/msg00151.html and > mine is the same. i do not know what im doing wrong, but i want very > badly that my ekiga works, i have debian testing y Ekiga 2.0,3 the > output of the problem are: > > $ ekiga -d 4 2> ekigaRun.txt > > $ less ekigaRun.txt |egrep ?rror > > 2007/06/22 15:12:51.987 0:24.266 Opal Listener:844dda8 Listen > UDP select error: Llamada al sistema interrumpida You can ignore that, it is when you exit. > 2007/06/22 15:12:51.992 0:24.271 SIP Transport:8370ab0 > OpalUDP Error on connection read select. > > nevertheless here i put the ekigarun.txt y thanks for your attention. What happens is that you do not receive answers from the server. You should check your internet connection, see if you do not have a firewall running or something similar... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jacortesmahmud at gmail.com Sat Jun 23 19:49:07 2007 From: jacortesmahmud at gmail.com (Jorge A. Cortes Mahmud) Date: Sat, 23 Jun 2007 14:49:07 -0500 Subject: [Ekiga-list] same problem "registration failed" In-Reply-To: <1182623385.4309.6.camel@scorpion> References: <1182623385.4309.6.camel@scorpion> Message-ID: > What happens is that you do not receive answers from the server. You > should check your internet connection, see if you do not have a firewall > running or something similar... Hi and thanks, how can i see if i have a firewall running? i believe that i haven't Is posible that my ISP have a firewall? My ISP have a modem but it is all, thanks From ralf.baales at netcologne.de Sun Jun 24 15:45:57 2007 From: ralf.baales at netcologne.de (Ralf Baales) Date: Sun, 24 Jun 2007 17:45:57 +0200 Subject: [Ekiga-list] Registration failed Message-ID: <467E91B5.5070200@netcologne.de> Hello, after installing and configuration of ekiga with KDE the following failure happens every time i'l try to log in: "Registration failed" ekiga -d 4 results are: 2007/06/24 17:33:28.707 0:00.803 ekiga Detected audio p lugins: ALSA 2007/06/24 17:33:28.709 0:00.804 ekiga Detected video p lugins: Picture,V4L 2007/06/24 17:33:28.709 0:00.804 ekiga Detected audio p lugins: ALSA 2007/06/24 17:33:28.709 0:00.804 ekiga Detected video p lugins: Picture,V4L 2007/06/24 17:33:29.103 0:01.198 ekiga Detected the fol lowing audio input devices: Default,USB Device 0x471:0x329,Conexant CX8801,NVidi a nForce2 with plugin ALSA 2007/06/24 17:33:29.104 0:01.199 ekiga Detected the fol lowing audio output devices: Default,NVidia nForce2 with plugin ALSA 2007/06/24 17:33:29.105 0:01.200 ekiga Detected the fol lowing video input devices: Hauppauge Nova-S-Plus DVB-S,Philips SPC 900NC webcam with plugin V4L 2007/06/24 17:33:29.105 0:01.200 ekiga Detected the fol lowing audio input devices: Default,USB Device 0x471:0x329,Conexant CX8801,NVidi a nForce2 with plugin ALSA 2007/06/24 17:33:29.106 0:01.201 ekiga Detected the fol lowing audio output devices: Default,NVidia nForce2 with plugin ALSA 2007/06/24 17:33:29.106 0:01.201 ekiga Detected the fol lowing video input devices: Hauppauge Nova-S-Plus DVB-S,Philips SPC 900NC webcam with plugin V4L 2007/06/24 17:33:29.114 0:01.209 ekiga AVAHI Failed t o create client: Daemon not running 2007/06/24 17:33:29.641 0:01.737 ekiga Ekiga version 2. 0.9 2007/06/24 17:33:29.642 0:01.737 ekiga OPAL version 2.2 .8 2007/06/24 17:33:29.643 0:01.738 ekiga PWLIB version 1. 10.7 2007/06/24 17:33:29.643 0:01.738 ekiga GNOME support en abled 2007/06/24 17:33:29.643 0:01.738 ekiga Fullscreen suppo rt enabled 2007/06/24 17:33:29.644 0:01.739 ekiga DBUS support ena bled 2007/06/24 17:33:29.649 0:01.745 ekiga Set TCP port ran ge to 30000:30010 2007/06/24 17:33:29.650 0:01.745 ekiga Set RTP port ran ge to 5000:5059 2007/06/24 17:33:29.651 0:01.746 ekiga Set UDP port ran ge to 5060:5100 2007/06/24 17:33:29.652 0:01.747 ekiga OpalEP Created endpoint: h323 2007/06/24 17:33:29.652 0:01.747 ekiga H323 Created endpoint. 2007/06/24 17:33:29.654 0:01.749 ekiga OpalMan Added ro ute "pc:.*=h323:" 2007/06/24 17:33:29.654 0:01.749 ekiga OpalEP Created endpoint: sip 2007/06/24 17:33:29.655 0:01.750 ekiga SIP Created endpoint. 2007/06/24 17:33:29.656 0:01.751 ekiga OpalMan Added ro ute "pc:.*=sip:" 2007/06/24 17:33:29.656 0:01.751 ekiga OpalEP Created endpoint: pc 2007/06/24 17:33:29.658 0:01.753 ekiga PCSS Created PC sound system endpoint. 2007/06/24 17:33:29.659 0:01.754 ekiga OpalMan Added ro ute "h323:.*=pc:" 2007/06/24 17:33:29.659 0:01.754 ekiga OpalMan Added ro ute "sip:.*=pc:" 2007/06/24 17:33:30.525 0:02.620 ekiga Listen Error in UDP listen: Die Adresse wird bereits verwendet 2007/06/24 17:33:30.530 0:02.625 ekiga AVAHI Error in itializing Avahi: %sDaemon not running 2007/06/24 17:33:30.541 0:02.637 Opal Listener:82d12a8 Listen Started listening thread on tcp$192.168.0.10:1720 2007/06/24 17:33:30.542 0:02.637 Opal Listener:82d12a8 Listen Waiting on socket accept on tcp$192.168.0.10:1720 2007/06/24 17:33:30.543 0:02.638 Opal Listener:82c8608 Listen Started listening thread on udp$192.168.0.10:5060 2007/06/24 17:33:30.543 0:02.638 Opal Listener:82c8608 Listen Waiting on UDP packet on udp$192.168.0.10:5060 2007/06/24 17:33:30.802 0:02.897 GMAccounts...t:0839f238 OpalUDP Binding to interface: 192.168.0.10:1083 2007/06/24 17:33:30.803 0:02.898 GMAccounts...t:0839f238 SIP Created transport udp$0.0.0.0 2007/06/24 17:33:30.804 0:02.899 GMAccounts...t:0839f238 OpalUDP Started connect to 86.64.162.35:5060 2007/06/24 17:33:30.805 0:02.900 GMAccounts...t:0839f238 OpalUDP Connect on pre-bound interface: 192.168.0.10 2007/06/24 17:33:30.806 0:02.901 GMAccounts...t:0839f238 SIP Created Transport for Registrar udp$86.64.162.35:5060 2007/06/24 17:33:30.810 0:02.905 GMAccounts...t:0839f238 SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 1 REGISTER Via: SIP/2.0/UDP 192.168.0.10:5061;branch=z9hG4bK22ed0aee-d520-dc11-8c2d-00112f7 7b7f9;rport User-Agent: Ekiga/2.0.9 From: ;tag=d0df0aee-d520-dc11-8c2d-00112f77b7f9 Call-ID: e8dc09ee-d520-dc11-8c2d-00112f77b7f9 at linux-zw5g To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/24 17:33:30.811 0:02.907 SIP Transport:84734d0 SIP Read thr ead started. 2007/06/24 17:33:30.812 0:02.907 SIP Transport:84734d0 SIP Waiting for PDU on udp$86.64.162.35:5060 2007/06/24 17:33:30.823 0:02.918 Housekeeper SIP Transact ion 1 REGISTER timeout, making retry 1 2007/06/24 17:33:30.823 0:02.918 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 1 REGISTER Via: SIP/2.0/UDP 192.168.0.10:5061;branch=z9hG4bK22ed0aee-d520-dc11-8c2d-00112f7 7b7f9;rport User-Agent: Ekiga/2.0.9 From: ;tag=d0df0aee-d520-dc11-8c2d-00112f77b7f9 Call-ID: e8dc09ee-d520-dc11-8c2d-00112f77b7f9 at linux-zw5g To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/24 17:33:30.902 0:02.997 GMAccounts...t:0839f238 OpalUDP Binding to interface: 192.168.0.10:1083 2007/06/24 17:33:30.903 0:02.998 GMAccounts...t:0839f238 SIP Created transport udp$0.0.0.0 2007/06/24 17:33:30.905 0:03.000 GMAccounts...t:0839f238 OpalUDP Started connect to 86.64.162.35:5060 2007/06/24 17:33:30.906 0:03.001 GMAccounts...t:0839f238 OpalUDP Connect on pre-bound interface: 192.168.0.10 2007/06/24 17:33:30.906 0:03.002 GMAccounts...t:0839f238 SIP Created Transport for Registrar udp$86.64.162.35:5060 2007/06/24 17:33:30.909 0:03.004 GMAccounts...t:0839f238 SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:baalr at ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 192.168.0.10:5062;branch=z9hG4bKa41f1aee-d520-dc11-8c2d-00112f7 7b7f9;rport User-Agent: Ekiga/2.0.9 From: ;tag=361a1aee-d520-dc11-8c2d-00112f77b7f9 Call-ID: 9e2619ee-d520-dc11-8c2d-00112f77b7f9 at linux-zw5g To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/24 17:33:30.910 0:03.005 SIP Transport:84a16b8 SIP Read thr ead started. 2007/06/24 17:33:30.911 0:03.006 SIP Transport:84a16b8 SIP Waiting for PDU on udp$86.64.162.35:5060 2007/06/24 17:33:31.411 0:03.506 Housekeeper SIP Transact ion 2 SUBSCRIBE timeout, making retry 1 2007/06/24 17:33:31.411 0:03.506 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:baalr at ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 192.168.0.10:5062;branch=z9hG4bKa41f1aee-d520-dc11-8c2d-00112f7 7b7f9;rport User-Agent: Ekiga/2.0.9 From: ;tag=361a1aee-d520-dc11-8c2d-00112f77b7f9 Call-ID: 9e2619ee-d520-dc11-8c2d-00112f77b7f9 at linux-zw5g To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/24 17:33:31.831 0:03.926 Housekeeper SIP Transact ion 1 REGISTER timeout, making retry 2 2007/06/24 17:33:31.831 0:03.926 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 1 REGISTER Via: SIP/2.0/UDP 192.168.0.10:5061;branch=z9hG4bK22ed0aee-d520-dc11-8c2d-00112f7 7b7f9;rport User-Agent: Ekiga/2.0.9 From: ;tag=d0df0aee-d520-dc11-8c2d-00112f77b7f9 Call-ID: e8dc09ee-d520-dc11-8c2d-00112f77b7f9 at linux-zw5g To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/24 17:33:32.411 0:04.506 Housekeeper SIP Transact ion 2 SUBSCRIBE timeout, making retry 2 2007/06/24 17:33:32.411 0:04.506 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:baalr at ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 192.168.0.10:5062;branch=z9hG4bKa41f1aee-d520-dc11-8c2d-00112f7 7b7f9;rport User-Agent: Ekiga/2.0.9 From: ;tag=361a1aee-d520-dc11-8c2d-00112f77b7f9 Call-ID: 9e2619ee-d520-dc11-8c2d-00112f77b7f9 at linux-zw5g To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/24 17:33:33.831 0:05.926 Housekeeper SIP Transact ion 1 REGISTER timeout, making retry 3 2007/06/24 17:33:33.831 0:05.926 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 REGISTER sip:ekiga.net SIP/2.0 CSeq: 1 REGISTER Via: SIP/2.0/UDP 192.168.0.10:5061;branch=z9hG4bK22ed0aee-d520-dc11-8c2d-00112f7 7b7f9;rport User-Agent: Ekiga/2.0.9 From: ;tag=d0df0aee-d520-dc11-8c2d-00112f77b7f9 Call-ID: e8dc09ee-d520-dc11-8c2d-00112f77b7f9 at linux-zw5g To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Content-Length: 0 Max-Forwards: 70 2007/06/24 17:33:34.415 0:06.510 Housekeeper SIP Set stat e Terminated_Timeout for transaction 1 REGISTER 2007/06/24 17:33:34.416 0:06.511 Housekeeper SIP Transact ion 2 SUBSCRIBE timeout, making retry 3 2007/06/24 17:33:34.416 0:06.511 Housekeeper SIP Sending PDU on udp$86.64.162.35:5060 SUBSCRIBE sip:baalr at ekiga.net SIP/2.0 CSeq: 2 SUBSCRIBE Via: SIP/2.0/UDP 192.168.0.10:5062;branch=z9hG4bKa41f1aee-d520-dc11-8c2d-00112f7 7b7f9;rport User-Agent: Ekiga/2.0.9 From: ;tag=361a1aee-d520-dc11-8c2d-00112f77b7f9 Call-ID: 9e2619ee-d520-dc11-8c2d-00112f77b7f9 at linux-zw5g To: Contact: Accept: application/simple-message-summary Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Expires: 3600 Event: message-summary Content-Length: 0 Max-Forwards: 70 2007/06/24 17:33:36.911 0:09.006 Housekeeper SIP Set stat e Terminated_Timeout for transaction 2 SUBSCRIBE Get?tet What's going wrong? tx Ralf From jpuydt at free.fr Sun Jun 24 15:57:17 2007 From: jpuydt at free.fr (Julien Puydt) Date: Sun, 24 Jun 2007 17:57:17 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <467E91B5.5070200@netcologne.de> References: <467E91B5.5070200@netcologne.de> Message-ID: <467E945D.4070207@free.fr> Ralf Baales wrote: > Hello, after installing and configuration of ekiga with KDE the > following failure happens every time i'l try to log in: > > "Registration failed" > What's going wrong? What did the firewall test give, in the druid? Snark on #ekiga From dsandras at seconix.com Sun Jun 24 17:30:14 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 24 Jun 2007 19:30:14 +0200 Subject: [Ekiga-list] same problem "registration failed" In-Reply-To: References: <1182623385.4309.6.camel@scorpion> Message-ID: <1182706214.3703.0.camel@scorpion> Le samedi 23 juin 2007 ? 14:49 -0500, Jorge A. Cortes Mahmud a ?crit : > > What happens is that you do not receive answers from the server. You > > should check your internet connection, see if you do not have a firewall > > running or something similar... > > Hi and thanks, how can i see if i have a firewall running? i believe > that i haven't There is not a unique solution to determine if you have a firewall running or not, unfortunately. > Is posible that my ISP have a firewall? Yes. > My ISP have a modem but it is all, thanks Perhaps it drops packets, do you have a way to check this ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ralf.baales at netcologne.de Sun Jun 24 21:04:35 2007 From: ralf.baales at netcologne.de (Ralf Baales) Date: Sun, 24 Jun 2007 23:04:35 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <467E945D.4070207@free.fr> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> Message-ID: <467EDC63.6020203@netcologne.de> Julien Puydt schrieb: > Ralf Baales wrote: > >> Hello, after installing and configuration of ekiga with KDE the >> following failure happens every time i'l try to log in: >> >> "Registration failed" >> > > >> What's going wrong? >> > > What did the firewall test give, in the druid? > NAT Test result: open NAT > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > From dsandras at seconix.com Sun Jun 24 21:14:30 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 24 Jun 2007 23:14:30 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <467EDC63.6020203@netcologne.de> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> <467EDC63.6020203@netcologne.de> Message-ID: <1182719670.29505.2.camel@scorpion> Le dimanche 24 juin 2007 ? 23:04 +0200, Ralf Baales a ?crit : > >> > > > > What did the firewall test give, in the druid? > > > NAT Test result: open NAT > You do not seem to be using STUN though. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From marcelops.stuff at gmail.com Tue Jun 26 19:55:19 2007 From: marcelops.stuff at gmail.com (Marcelo Pereira) Date: Tue, 26 Jun 2007 16:55:19 -0300 Subject: [Ekiga-list] Does Ekiga do it?? Message-ID: <4bdc65fd0706261255m3c61f667r1bf30b2a3fb6ca51@mail.gmail.com> Hi there, I'm looking for a videoconference solution, could you please tell me if Ekiga do the following?? I have to give a class to lot of students, they are going to see the class from their homes. So, I would like to turn my camera on, and let my students see the class, reaching it from a website (for instance). I would like to give personal passwords to my students, so they access my website and then open the videoconference. (Like a videoconference server) Does Ekiga do it?? Thanks in advance, Marcelo -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Tue Jun 26 20:39:27 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Tue, 26 Jun 2007 22:39:27 +0200 Subject: [Ekiga-list] Does Ekiga do it?? In-Reply-To: <4bdc65fd0706261255m3c61f667r1bf30b2a3fb6ca51@mail.gmail.com> References: <4bdc65fd0706261255m3c61f667r1bf30b2a3fb6ca51@mail.gmail.com> Message-ID: Hi , Ekiga does not do it by itelf , but can do it along with an asterisk ( SIP ) or MCU ( H323) server. I dn't know currently any free service on the web that let you do this, anyone ? I'm afraid right now the only easy solution to do this would either pure video streaming ( vlc , icecast , easy ), or proprietary one ( flash , etc.. ) 2007/6/26, Marcelo Pereira : > > Hi there, > > I'm looking for a videoconference solution, could you please tell me if > Ekiga do the following?? > > I have to give a class to lot of students, they are going to see the class > from their homes. > > So, I would like to turn my camera on, and let my students see the class, > reaching it from a website (for instance). > > I would like to give personal passwords to my students, so they access my > website and then open the videoconference. (Like a videoconference server) > > Does Ekiga do it?? > > Thanks in advance, > Marcelo > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From rmohan43 at gmail.com Wed Jun 27 11:38:05 2007 From: rmohan43 at gmail.com (Raj Mohan Kovilath) Date: Wed, 27 Jun 2007 17:08:05 +0530 Subject: [Ekiga-list] Ekiga/OpenMCU issues Message-ID: <34dea8b10706270438l310761d9nfa1bc8c85710cfa0@mail.gmail.com> Hello, When testing Ekiga 2.0.0 with OpenMCU 2.2.1 for multi-point video conferencing I face the following problems: (OpenMCU lets upto 4 conference participants to be viewed in the Ekiga window). - The picture appears very choppy in the remote video when there is motion involved. - If there are only less than 4 participants, in the conference, the viewing area of the non-existent participants display garbage like choppy images. - Running Ekiga with -d4 option shows "jitter buffer exceeded" messages. - Sometimes Ekiga hangs/crashes. Maybe my Ekiga configuration settings are not correct or I require some patches to be applied to Ekiga. Or it might be that OpenMCU has a problem. Shown below are the environment and configuration details. Any help to solve the problem are most welcome. Thanks & regards, Raj Mohan Environment: - Ekiga 2.0.9 - OpenMCU V2.2.1 - Debain/etch 2.6.12 P4 SMP 686. - The Ekiga 2.0.9 installation files were downloaded from www.ekiga.org. - OpenMCU is built without H.263 support. - Testing is being carried out in our local LAN using Logitech Quickcam EC(usb) and a JVC video camera (firewire). Ekiga Configuration: - Max.jitter buffer size = 1024 - Enable H.245 tunnelling - NO - Enable early H.245 - NO - Enable fast start procedure - NO - Send DTMP as 'string'. - Audio codecs - default settings - Enable echo cancellation - YES - Max.video bandwidth - 50 - Frame rate - Slider is set more to the left of centre (a quantitative display would have been nice here). OpenMCU configuration: - Video frame rate = 15 (1 <= vfs <= 31) - Video quality = 4 (1 <= vq <= 10) --- End of message --- -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Wed Jun 27 12:02:07 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 27 Jun 2007 14:02:07 +0200 Subject: [Ekiga-list] Ekiga/OpenMCU issues In-Reply-To: <34dea8b10706270438l310761d9nfa1bc8c85710cfa0@mail.gmail.com> References: <34dea8b10706270438l310761d9nfa1bc8c85710cfa0@mail.gmail.com> Message-ID: <1182945727.24413.1.camel@scorpion> Le mercredi 27 juin 2007 ? 17:08 +0530, Raj Mohan Kovilath a ?crit : > Hello, > When testing Ekiga 2.0.0 with OpenMCU 2.2.1 for multi-point video > conferencing I face the following problems: > (OpenMCU lets upto 4 conference participants to be viewed in the Ekiga > window). > * The picture appears very choppy in the remote video when there > is motion involved. That is what OpenMCU sends you back. Try playing with OpenMCU settings. > * If there are only less than 4 participants, in the conference, > the viewing area of the non-existent participants display > garbage like choppy images. Again, that is what OpenMCU sends you back, it has nothing to do with Ekiga itself. > * Running Ekiga with -d4 option shows "jitter buffer exceeded" > messages. Either your soundcard is misconfigured, or you are exceeding your bandwidth. > * Sometimes Ekiga hangs/crashes. Please post a backtrace so that we can investigate on that specific problem. It could be related to your sound issues. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jpuydt at free.fr Wed Jun 27 12:15:18 2007 From: jpuydt at free.fr (Julien Puydt) Date: Wed, 27 Jun 2007 14:15:18 +0200 Subject: [Ekiga-list] Ekiga/OpenMCU issues In-Reply-To: <34dea8b10706270438l310761d9nfa1bc8c85710cfa0@mail.gmail.com> References: <34dea8b10706270438l310761d9nfa1bc8c85710cfa0@mail.gmail.com> Message-ID: <468254D6.9070804@free.fr> Raj Mohan Kovilath wrote: > When testing Ekiga 2.0.0 You've got to be kidding... didn't we release *nine* bugfix releases since then!? Upgrade. Snark on #ekiga From lists at dcorking.com Wed Jun 27 12:16:37 2007 From: lists at dcorking.com (David Corking) Date: Wed, 27 Jun 2007 13:16:37 +0100 Subject: [Ekiga-list] Ekiga/OpenMCU issues In-Reply-To: <468254D6.9070804@free.fr> References: <34dea8b10706270438l310761d9nfa1bc8c85710cfa0@mail.gmail.com> <468254D6.9070804@free.fr> Message-ID: On 6/27/07, Julien Puydt wrote: > Raj Mohan Kovilath wrote: > > When testing Ekiga 2.0.0 > > You've got to be kidding... didn't we release *nine* bugfix releases > since then!? I suspect a typo - he lists Ekiga 2.0.9 later in the message. From ralf.baales at netcologne.de Wed Jun 27 16:28:03 2007 From: ralf.baales at netcologne.de (Ralf Baales) Date: Wed, 27 Jun 2007 18:28:03 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <1182719670.29505.2.camel@scorpion> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> <467EDC63.6020203@netcologne.de> <1182719670.29505.2.camel@scorpion> Message-ID: <46829013.8040308@netcologne.de> Damien Sandras schrieb: > Le dimanche 24 juin 2007 ? 23:04 +0200, Ralf Baales a ??crit : > >>>> >>>> >>> What did the firewall test give, in the druid? >>> >>> >> NAT Test result: open NAT >> >> > > You do not seem to be using STUN though. > Did i have to use it? The same result: "Registration failed: timeout" From michel.memeteau at gmail.com Wed Jun 27 21:00:23 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Wed, 27 Jun 2007 23:00:23 +0200 Subject: [Ekiga-list] Fwd: [Xmeeting-application] announce H264 ? In-Reply-To: References: Message-ID: Hi , for your information , here is the reason why our test with ekiga in H264 ( SVN version ) failed with SIP Is SVN able to do H264 in H323 , I guess yes ? ---------- Forwarded message ---------- From: Hannes Friederich Date: 27 juin 2007 22:23 Subject: Re: [Xmeeting-application] announce H264 ? To: michel memeteau Cc: xmeeting-application at lists.sourceforge.net Hello, At the moment, H.264 is only supported in the H.323 stack, not in SIP. So, to use H.264 between two XMeeting instances, you need to establish a call using H.323. In contrast to SIP, gatekeepers are not so common, so you might run into troubles with NAT/Firewall traversal, though. Hope this helps Hannes On 23. Jun 2007, at 23:06, michel memeteau wrote: Hi all , Xmeeting is really one of the Killer apps I have on my new macbook I tried to do h264with ekiga SVN and Xmeeting seems to annouce only H263 & H261 to the remote even if H264 is checked and limited mode unchecked . How can it work between two Xmeeting then ? -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/_______________________________________________ Xmeeting-application mailing list Xmeeting-application at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xmeeting-application -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Wed Jun 27 21:13:51 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 27 Jun 2007 23:13:51 +0200 Subject: [Ekiga-list] Fwd: [Xmeeting-application] announce H264 ? In-Reply-To: References: Message-ID: <1182978832.4350.11.camel@scorpion> Hi, I think it is the opposite. Le mercredi 27 juin 2007 ? 23:00 +0200, michel memeteau a ?crit : > Hi , for your information , here is the reason why our test with ekiga > in H264 ( SVN version ) failed with SIP > > Is SVN able to do H264 in H323 , I guess yes ? > > ---------- Forwarded message ---------- > From: Hannes Friederich > Date: 27 juin 2007 22:23 > Subject: Re: [Xmeeting-application] announce H264 ? > To: michel memeteau < michel.memeteau at gmail.com> > Cc: xmeeting-application at lists.sourceforge.net > > Hello, > > > At the moment, H.264 is only supported in the H.323 stack, not in SIP. > So, to use H.264 between two XMeeting instances, you need to establish > a call using H.323. > In contrast to SIP, gatekeepers are not so common, so you might run > into troubles with NAT/Firewall traversal, though. > > > Hope this helps > > > Hannes > > On 23. Jun 2007, at 23:06, michel memeteau wrote: > > > > Hi all , > > > > Xmeeting is really one of the Killer apps I have on my new macbook > > > > I tried to do h264with ekiga SVN and Xmeeting seems to annouce only > > H263 & H261 to the remote even if H264 is checked and limited mode > > unchecked . How can it work between two Xmeeting then ? > > > > > > > > -- > > %<------------------------------------------------------->% > > Michel memeteau > > VOIP | Visio: sip:freechelmi at gizmoproject.com > > 0491886375 0624808051 > > jabber/GoogleTalk : freechelmi at jabber.fr > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by DB2 Express > > Download DB2 Express C - the FREE version of DB2 express and take > > control of your XML. No limits. Just data. Click to get it now. > > http://sourceforge.net/powerbar/db2/_______________________________________________ > > Xmeeting-application mailing list > > Xmeeting-application at lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/xmeeting-application > > > > > -- > %<------------------------------------------------------->% > Michel memeteau > VOIP | Visio: sip:freechelmi at gizmoproject.com > 0491886375 0624808051 > jabber/GoogleTalk : freechelmi at jabber.fr > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Jun 27 21:26:28 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 27 Jun 2007 23:26:28 +0200 Subject: [Ekiga-list] Fwd: [Xmeeting-application] announce H264 ? In-Reply-To: <1182978832.4350.11.camel@scorpion> References: <1182978832.4350.11.camel@scorpion> Message-ID: <1182979588.4350.19.camel@scorpion> Le mercredi 27 juin 2007 ? 23:13 +0200, Damien Sandras a ?crit : > Hi, > > > I think it is the opposite. H.264 has only been tested extensively by Matthias with SIP. Matthias (you can catch him on IRC, #ekiga) is the original author of the H.264 codec for OPAL. Not sure he is subscribed to the users list. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From thibaud.roth at betriebsdirektor.de Thu Jun 28 19:40:27 2007 From: thibaud.roth at betriebsdirektor.de (Thibaud Roth) Date: Thu, 28 Jun 2007 21:40:27 +0200 Subject: [Ekiga-list] No voice playback Message-ID: <46840EAB.9050002@betriebsdirektor.de> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I hope this is the correct platform for my problem. I'm trying to set up Ekiga on Ubuntu Feisty Fawn. My microphone and soundcard work correctly (I can hear my own voice through the speakers, if I want to). In Ekiga however I can not hear, what other people say. They can hear what I say. Even if I call the echo test, I don't hear anything. I can test my sound clearly without any trouble in "Configuration Assistant". In the FAQ on ekiga.org is no further advice but to call 500 at ekiga.net. I don't know what else I can do. I hope you can help me. Regards Thibaud - -- Thibaud Roth E-Mail: thibaud.roth at betriebsdirektor.de GnuPG Public Key: http://thibaudroth.magicforrest.de/files/thibaud-roth.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGhA6rc4PMESs9nvIRAhZmAKDN2V3ScFKaTegqkv73ue9863W97wCdEz12 9u0/du7RUJuSivAsKxJJ2KQ= =kujO -----END PGP SIGNATURE----- From jpuydt at free.fr Thu Jun 28 19:50:09 2007 From: jpuydt at free.fr (Julien Puydt) Date: Thu, 28 Jun 2007 21:50:09 +0200 Subject: [Ekiga-list] No voice playback In-Reply-To: <46840EAB.9050002@betriebsdirektor.de> References: <46840EAB.9050002@betriebsdirektor.de> Message-ID: <468410F1.90309@free.fr> Hi, Thibaud Roth wrote: > I hope this is the correct platform for my problem. It is. > I'm trying to set up Ekiga on Ubuntu Feisty Fawn. Bad : doesn't it only ship 2.0.3, which is pretty obsolete by now? (we're up to 2.0.9...). > My microphone and soundcard work correctly (I can hear my own voice through the speakers, if I want to). Doesn't mean anything : it's not sound going in the computer then out the computer, it's just sound looping within the soundcard. What does the druid audio test say? > In Ekiga however I can not hear, what other people say. They can hear what I say. Even if I call the echo test, I don't hear anything. If the audio setup is ok, that shows your firewall blocks incoming audio, and not outgoing audio. > I can test my sound clearly without any trouble in "Configuration Assistant". Ah, so your setup is ok, and you have a firewall issue. > In the FAQ on ekiga.org is no further advice but to call 500 at ekiga.net. I don't know what else I can do. Well, it clearly shows you have a firewall issue. What did the druid say about your network? Snark on #ekiga From sevmek at free.fr Thu Jun 28 19:55:37 2007 From: sevmek at free.fr (yannick) Date: Thu, 28 Jun 2007 21:55:37 +0200 Subject: [Ekiga-list] No voice playback In-Reply-To: <468410F1.90309@free.fr> References: <46840EAB.9050002@betriebsdirektor.de> <468410F1.90309@free.fr> Message-ID: <1183060537.23259.32.camel@achille> Le jeudi 28 juin 2007 ? 21:50 +0200, Julien Puydt a ?crit : > Hi, > > Thibaud Roth wrote: > > I hope this is the correct platform for my problem. > > It is. > > > I'm trying to set up Ekiga on Ubuntu Feisty Fawn. > > Bad : doesn't it only ship 2.0.3, which is pretty obsolete by now? > (we're up to 2.0.9...). Yes, Ubuntu ship 2.0.3 with Feisty. Upgrading to 2.0.9 may solve your problem (I've saw this issue many times yet...): http://wiki.ekiga.org/index.php/Linux_Users Regards, Yannick > > > My microphone and soundcard work correctly (I can hear my own voice through the speakers, if I want to). > > Doesn't mean anything : it's not sound going in the computer then out > the computer, it's just sound looping within the soundcard. What does > the druid audio test say? > > > In Ekiga however I can not hear, what other people say. They can hear what I say. Even if I call the echo test, I don't hear anything. > > If the audio setup is ok, that shows your firewall blocks incoming > audio, and not outgoing audio. > > > I can test my sound clearly without any trouble in "Configuration Assistant". > > Ah, so your setup is ok, and you have a firewall issue. > > > In the FAQ on ekiga.org is no further advice but to call 500 at ekiga.net. I don't know what else I can do. > > Well, it clearly shows you have a firewall issue. What did the druid say > about your network? > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From gwenn.moreilles at yahoo.fr Thu Jun 28 20:01:16 2007 From: gwenn.moreilles at yahoo.fr (gwenn) Date: Thu, 28 Jun 2007 22:01:16 +0200 Subject: [Ekiga-list] Ekiga and VIsta Message-ID: <1183060876.6824.1.camel@gwenn-desktop> Hi, I tried Ekiga with Vista but It didn't work. Is it supposed to work with Vista? Thanks a lot. Sorry, but I sent this email twice and I didn't know if I had to do it. Gwenn From oliver at schinagl.nl Thu Jun 28 22:13:33 2007 From: oliver at schinagl.nl (Oliver Schinagl) Date: Fri, 29 Jun 2007 00:13:33 +0200 Subject: [Ekiga-list] Ekiga & Pidgin merge? Message-ID: <4684328D.8040803@schinagl.nl> Hello all, first off, Ekiga and Pidgin are great products. They works quite well in their own domain. I was wondering, with projects forking left and right, and about a hundred several programs/projects doing the same, why wouldn't pidgin and ekiga concider a merge? If not merge of apps, a merge of resources? I know Pidgin is working on libjingle to be used with Pidgin to supply VoiP/Gtalk functionality, but where is the video part? Or more specifically, why would you wanna produce everything in duality? The way I see it, with libpurple/libjingle you could technically have any front end client imagineable, focus on the audio/video portion, or focus on the chat portion, or have it all. I won't say that OSS projects should try to keep up or what not with commercial products (skype or MSN for example) but it would be kinda neat if there was an OSS application that was ahead of the others (think compiz/XGL sorta). Just know, that the last thing I wish to accomplish with this e-mail is to hit anybody against the shins, nor hurt anybody's feelings of course. But if a discussion would start from this, and maybe a merge at the end, why not? Thanks for listening/reading anyway, Oliver From brendanmiller at google.com Thu Jun 28 23:08:51 2007 From: brendanmiller at google.com (Brendan Miller) Date: Thu, 28 Jun 2007 16:08:51 -0700 Subject: [Ekiga-list] ekiga on ubuntu dapper Message-ID: <5252522b0706281608m35227cb2q47b0fde75afb847c@mail.gmail.com> I'm trying to install ekiga 2.0.9. on dapper drake, and I've run into a few problems. I've downloaded all of the debs for dapper from your website, and run sudo dpkg -i *.deb and I get dpkg: error processing ekiga_2.0.9-0.dapper0_i386.deb (--install): cannot access archive: Permission denied dpkg: error processing libopal-2.2.0_2.2.8-0.dapper0_i386.deb (--install): cannot access archive: Permission denied dpkg: error processing libpt-1.10.0_1.10.7-0.dapper0_i386.deb (--install): cannot access archive: Permission denied dpkg: error processing libpt-plugins-alsa_1.10.7-0.dapper0_i386.deb (--install): cannot access archive: Permission denied dpkg: error processing libpt-plugins-avc_1.10.7-0.dapper0_i386.deb (--install): cannot access archive: Permission denied dpkg: error processing libpt-plugins-dc_1.10.7-0.dapper0_i386.deb (--install): cannot access archive: Permission denied dpkg: error processing libpt-plugins-v4l2_1.10.7-0.dapper0_i386.deb (--install): cannot access archive: Permission denied dpkg: error processing libpt-plugins-v4l_1.10.7-0.dapper0_i386.deb (--install): cannot access archive: Permission denied What's up with this? How can I lack permissions to access the archive if I'm running as root and it's just a file in my home directory? Could this possible be an NFS permissions issue? Thanks From sevmek at free.fr Thu Jun 28 23:11:44 2007 From: sevmek at free.fr (yannick) Date: Fri, 29 Jun 2007 01:11:44 +0200 Subject: [Ekiga-list] ekiga on ubuntu dapper In-Reply-To: <5252522b0706281608m35227cb2q47b0fde75afb847c@mail.gmail.com> References: <5252522b0706281608m35227cb2q47b0fde75afb847c@mail.gmail.com> Message-ID: <1183072304.23259.36.camel@achille> Le jeudi 28 juin 2007 ? 16:08 -0700, Brendan Miller a ?crit : > I'm trying to install ekiga 2.0.9. on dapper drake, and I've run into > a few problems. > > I've downloaded all of the debs for dapper from your website, and run > sudo dpkg -i *.deb and I get > dpkg: error processing ekiga_2.0.9-0.dapper0_i386.deb (--install): > cannot access archive: Permission denied > dpkg: error processing libopal-2.2.0_2.2.8-0.dapper0_i386.deb (--install): > cannot access archive: Permission denied > dpkg: error processing libpt-1.10.0_1.10.7-0.dapper0_i386.deb (--install): > cannot access archive: Permission denied > dpkg: error processing libpt-plugins-alsa_1.10.7-0.dapper0_i386.deb > (--install): cannot access archive: Permission denied > dpkg: error processing libpt-plugins-avc_1.10.7-0.dapper0_i386.deb (--install): > cannot access archive: Permission denied > dpkg: error processing libpt-plugins-dc_1.10.7-0.dapper0_i386.deb (--install): > cannot access archive: Permission denied > dpkg: error processing libpt-plugins-v4l2_1.10.7-0.dapper0_i386.deb > (--install): cannot access archive: Permission denied > dpkg: error processing libpt-plugins-v4l_1.10.7-0.dapper0_i386.deb (--install): > cannot access archive: Permission denied > > What's up with this? How can I lack permissions to access the archive > if I'm running as root and it's just a file in my home directory? Hi, Use the repository: http://wiki.ekiga.org/index.php/Linux_Users Regards, Yannick > Could this possible be an NFS permissions issue? > > Thanks > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From jpuydt at free.fr Fri Jun 29 06:56:01 2007 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 29 Jun 2007 08:56:01 +0200 Subject: [Ekiga-list] Ekiga & Pidgin merge? In-Reply-To: <4684328D.8040803@schinagl.nl> References: <4684328D.8040803@schinagl.nl> Message-ID: <4684AD01.6000500@free.fr> Oliver Schinagl wrote: > Hello all, > > first off, Ekiga and Pidgin are great products. They works quite well in > their own domain. > > I was wondering, with projects forking left and right, and about a > hundred several programs/projects doing the same, why wouldn't pidgin > and ekiga concider a merge? If not merge of apps, a merge of resources? > > I know Pidgin is working on libjingle to be used with Pidgin to supply > VoiP/Gtalk functionality, but where is the video part? Or more > specifically, why would you wanna produce everything in duality? > > The way I see it, with libpurple/libjingle you could technically have > any front end client imagineable, focus on the audio/video portion, or > focus on the chat portion, or have it all. > I won't say that OSS projects should try to keep up or what not with > commercial products (skype or MSN for example) but it would be kinda > neat if there was an OSS application that was ahead of the others (think > compiz/XGL sorta). > > Just know, that the last thing I wish to accomplish with this e-mail is > to hit anybody against the shins, nor hurt anybody's feelings of course. > But if a discussion would start from this, and maybe a merge at the end, > why not? > > Thanks for listening/reading anyway, I did propose some code some *years* ago, but there was no interest from the gaim (now pidgin) developpers. We're currently reworking the inner structure of ekiga, so perhaps it will be possible to build bridges. Snark on #ekiga From dsandras at seconix.com Fri Jun 29 07:56:23 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 29 Jun 2007 09:56:23 +0200 Subject: [Ekiga-list] Ekiga and VIsta In-Reply-To: <1183060876.6824.1.camel@gwenn-desktop> References: <1183060876.6824.1.camel@gwenn-desktop> Message-ID: <1183103783.4216.6.camel@scorpion> Hi, Le jeudi 28 juin 2007 ? 22:01 +0200, gwenn a ?crit : > Hi, > > I tried Ekiga with Vista but It didn't work. Is it supposed to work with > Vista? > There is no reason why it wouldn't work. What doesn't work exactly ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From n_ultimodruido at email.it Fri Jun 29 12:44:30 2007 From: n_ultimodruido at email.it (n_ultimodruido at email.it) Date: Fri, 29 Jun 2007 14:44:30 +0200 Subject: [Ekiga-list] Does Ekiga do it?? Message-ID: <4effc6a48e5a5ffd0e3bbeaf0a3c4f18@151.92.176.3> Hi! Not to do bad advertise to ekiga which I love, but have a look at this: http://italc.sourceforge.net/ may be it helps bye Nicola --------- Original Message -------- Da: Ekiga mailing list To: ekiga-list at gnome.org Oggetto: [Ekiga-list] Does Ekiga do it?? Data: 26/06/07 21:55 > > Hi there,I'm looking for a videoconference solution, could you please tell me if Ekiga do the following??I have to give a class to lot of students, they are going to see the class from their homes. > > > So, I would like to turn my camera on, and let my students see the class, reaching it from a website (for instance).I > would like to give personal passwords to my students, so they access my > website and then open the videoconference. (Like a videoconference > server) > Does Ekiga do it??Thanks in advance,Marcelo > > > > > > > > > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: In REGALO 'All the Good Thing' di NELLY FURTADO Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=6616&d=20070629 From gwenn.moreilles at yahoo.fr Fri Jun 29 12:51:13 2007 From: gwenn.moreilles at yahoo.fr (gwenn) Date: Fri, 29 Jun 2007 14:51:13 +0200 Subject: [Ekiga-list] Ekiga and VIsta In-Reply-To: <1183103783.4216.6.camel@scorpion> References: <1183060876.6824.1.camel@gwenn-desktop> <1183103783.4216.6.camel@scorpion> Message-ID: <1183121473.5633.6.camel@gwenn-desktop> Does anybody using Ekiga with vista wants to make a phone call with me? I just would like to check that It works fine and that it is a configuration problem I have. Thanks a lot you all. gwenn69 at ekiga.net Le vendredi 29 juin 2007 ? 09:56 +0200, Damien Sandras a ?crit : > Hi, > > Le jeudi 28 juin 2007 ? 22:01 +0200, gwenn a ?crit : > > Hi, > > > > I tried Ekiga with Vista but It didn't work. Is it supposed to work with > > Vista? > > > > There is no reason why it wouldn't work. > > What doesn't work exactly ? > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From gwenn.moreilles at yahoo.fr Fri Jun 29 12:43:08 2007 From: gwenn.moreilles at yahoo.fr (gwenn) Date: Fri, 29 Jun 2007 14:43:08 +0200 Subject: [Ekiga-list] Ekiga and VIsta In-Reply-To: <1183103783.4216.6.camel@scorpion> References: <1183060876.6824.1.camel@gwenn-desktop> <1183103783.4216.6.camel@scorpion> Message-ID: <1183120988.5532.1.camel@gwenn-desktop> Hi, No sound and no image after accepting the phone call. Thanks for your answers. Le vendredi 29 juin 2007 ? 09:56 +0200, Damien Sandras a ?crit : > Hi, > > Le jeudi 28 juin 2007 ? 22:01 +0200, gwenn a ?crit : > > Hi, > > > > I tried Ekiga with Vista but It didn't work. Is it supposed to work with > > Vista? > > > > There is no reason why it wouldn't work. > > What doesn't work exactly ? > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From jpuydt at free.fr Fri Jun 29 13:30:49 2007 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 29 Jun 2007 15:30:49 +0200 Subject: [Ekiga-list] Does Ekiga do it?? In-Reply-To: <4effc6a48e5a5ffd0e3bbeaf0a3c4f18@151.92.176.3> References: <4effc6a48e5a5ffd0e3bbeaf0a3c4f18@151.92.176.3> Message-ID: <46850989.1010501@free.fr> n_ultimodruido at email.it wrote: > Not to do bad advertise to ekiga which I love, but have a look at this: > http://italc.sourceforge.net/ Well, I don't see how that would be bad advertising for ekiga : this doesn't do VoIP... but it looks like it does good desktop sharing! Snark on #ekiga From alesan at manoweb.com Fri Jun 29 13:57:36 2007 From: alesan at manoweb.com (Alessio Sangalli) Date: Fri, 29 Jun 2007 15:57:36 +0200 Subject: [Ekiga-list] linksys SPA-3102 + ekiga Message-ID: <46850FD0.5010103@manoweb.com> Hi, I've been trying to call in local network (same switch, no routing no NAT, no SIP registration, direct IP call) a linksys-sipura SPA-3102 with a regular analog phone attached. I only had success using the codec "PCMA" or "PCMU", any other codec would let the telephone ring but, when I picked up the receiver, I continued to get the calling tone at the ekiga side, altough there was "connected with IP" on the status label. At first I thought that there were "pitch" problems with PCMU but it seems I had a false alarm due to the eccessive gain used on my headset microphone. The Linksys SPA-3102 shows these choices as "preferred codecs": G711a G711u G726-8 G726-16 G726-24 G726-32 G726-40 G729a G723 Thank you Alessio From dsandras at seconix.com Fri Jun 29 15:51:47 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 29 Jun 2007 17:51:47 +0200 Subject: [Ekiga-list] linksys SPA-3102 + ekiga In-Reply-To: <46850FD0.5010103@manoweb.com> References: <46850FD0.5010103@manoweb.com> Message-ID: <1183132307.4216.56.camel@scorpion> Le vendredi 29 juin 2007 ? 15:57 +0200, Alessio Sangalli a ?crit : > Hi, I've been trying to call in local network (same switch, no routing > no NAT, no SIP registration, direct IP call) a linksys-sipura SPA-3102 > with a regular analog phone attached. > > I only had success using the codec "PCMA" or "PCMU", any other codec > would let the telephone ring but, when I picked up the receiver, I > continued to get the calling tone at the ekiga side, altough there was > "connected with IP" on the status label. > > At first I thought that there were "pitch" problems with PCMU but it > seems I had a false alarm due to the eccessive gain used on my headset > microphone. > > The Linksys SPA-3102 shows these choices as "preferred codecs": > G711a > G711u > G726-8 > G726-16 > G726-24 > G726-32 > G726-40 > G729a > G723 A -d 4 debug trace would be useful, but I think the only common codecs are G.711a and G.711u... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net