[Ekiga-list] ekiga sound problems

[Damien Sandras]

Hi,

Le dimanche 03 septembre 2006 à 22:36 +0200, Carles Pina i Estany a
écrit :
> Bonjour :-)
> 
> On Sep/03/2006, Damien Sandras wrote:
> 
> > Does this give good results :
> > arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c
> > 1 -r 8000 -f S16_LE -
> 
> Not good results. I can hear a my voice, with echo (and again, again,
> again). And I can hear a "click click click" too (1 time per second
> aprox.) 
> 
> If I split it:
> arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE a.wav
> aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE a.wav
> 
> Then it works fine (I hear myself without any problem)
> 
> Twinkle is using plugw:0,0 and works fine...

Perhaps twinkle doesn't use the same settings.
Notice that Ekiga supports two types of codecs :
- Wideband : 16kHz
- Narrowband : 8 kHz

We have determined that there was a problem with ALSA and Narrowband as
arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c
1 -r 8000 -f S16_LE -
doesn't work.

What about the following command :
arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0 -c
1 -r 16000 -f S16_LE -

?



> 
> Thanks for your attention,
> 
-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandras at ekiga.net
                         sip:600000 at ekiga.net