From mtbc at ixod.org Wed Feb 1 00:47:22 2012 From: mtbc at ixod.org (Mark T. B. Carroll) Date: Tue, 31 Jan 2012 19:47:22 -0500 Subject: [Ekiga-list] Advertisements on Ekiga.org with OpenX? In-Reply-To: <20120131085730.4bdc291e@acer> (Genghis Khan's message of "Tue, 31 Jan 2012 08:57:30 +0200") References: <20120130202532.02f01f8f@acer> <4F271A24.4080905@gathman.org> <20120131085730.4bdc291e@acer> Message-ID: <87ipjrl6qt.fsf@ixod.org> Genghis Khan writes: > I too would like to see GIF, JPEG, PNG (static and animated). Animated would have me finding a way to block it. Movement is really distracting when one's trying to read something else on the page. Mark From stuart at gathman.org Wed Feb 1 02:08:30 2012 From: stuart at gathman.org (Stuart Gathman) Date: Tue, 31 Jan 2012 21:08:30 -0500 Subject: [Ekiga-list] Advertisements on Ekiga.org with OpenX? In-Reply-To: <87ipjrl6qt.fsf@ixod.org> References: <20120130202532.02f01f8f@acer> <4F271A24.4080905@gathman.org> <20120131085730.4bdc291e@acer> <87ipjrl6qt.fsf@ixod.org> Message-ID: <4F289E9E.9030907@gathman.org> Long ago, Nostradamus foresaw that on 01/31/2012 07:47 PM, Mark T. B. Carroll would write: > Genghis Khan writes: > >> I too would like to see GIF, JPEG, PNG (static and animated). > Animated would have me finding a way to block it. Movement is really > distracting when one's trying to read something else on the page. > Is there a way to animate only on rollover without using flash? (Javascript knows when the mouse rolls over, but I'm not sure if it can start/stop GIF/PNG/JPEG animation.) If you're moving the mouse around anyway, the movement following the mouse is not so distracting (although reminiscent of a scene from Harry Potter). From genghiskhan at gmx.ca Wed Feb 1 03:41:06 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Wed, 1 Feb 2012 05:41:06 +0200 Subject: [Ekiga-list] Advertisements on Ekiga.org with OpenX? In-Reply-To: <4F289E9E.9030907@gathman.org> References: <20120130202532.02f01f8f@acer> <4F271A24.4080905@gathman.org> <20120131085730.4bdc291e@acer> <87ipjrl6qt.fsf@ixod.org> <4F289E9E.9030907@gathman.org> Message-ID: <20120201054106.2364f3ae@acer> On Tue, 31 Jan 2012 19:47:22 -0500 "Mark T. B. Carroll" wrote: > Animated would have me finding a way to block it. Movement is really > distracting when one's trying to read something else on the page. > Fair enough. On Tue, 31 Jan 2012 21:08:30 -0500 Stuart Gathman wrote: > Is there a way to animate only on rollover without using flash? > (Javascript knows when the mouse rolls over, but I'm not sure if it > can start/stop GIF/PNG/JPEG animation.) If you're moving the mouse > around anyway, the movement following the mouse is not so distracting > (although reminiscent of a scene from Harry Potter). > I do not know if it can activate a CSS3 animation, though I believe that it can if it did with CSS before. I recall seeing, a few years ago, a 300x300 image which started to move like a "cube inside a screen" on mouse-over (Javascript was disabled). When I was looking in the code of the page I have seen that it was a 300x1800 image which had 6 different squares with 6 different poses of that square. It was a cool trick which didn't require high load of CPU. I dislike Javascript because it can detect my mouse cursor and what I am copying, selecting etc. Maybe we would be able to get help on how to do reproduce this, from users of http://userstyles.org/ or any other CSS discussion board. From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Feb 1 09:47:54 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 01 Feb 2012 10:47:54 +0100 Subject: [Ekiga-list] Acoustic feedback In-Reply-To: <20120130164504.7e21867d@maple> References: <20120130164504.7e21867d@maple> Message-ID: <4F290A4A.4040007@pu-pm.univ-fcomte.fr> On 30/01/12 21:45, J. Paul Bissonnette wrote: > I am wondering if I am missing a setting some where. > The system is Xububtu 11.10, logitech webcam pro 9000, Bose companion > speakers. The annoying issue is that is I have the volume loud enough > to hear the speakers during an echo test the microphone is too > sensitive and causes acoustic feed back. Echo cancellation is on, it > does reduce the feedback considerably I have adjusted the jitter > buffer from 200 - 1500 ms. this doesn''t seem to have much affect. > > With the same volume levels skype does not cause any feedback. skype should have a better echo cancellation system. Ekiga uses the one provided by speex. -- Eugen From genghiskhan at gmx.ca Wed Feb 1 10:21:18 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Wed, 1 Feb 2012 12:21:18 +0200 Subject: [Ekiga-list] Acoustic feedback In-Reply-To: <4F290A4A.4040007@pu-pm.univ-fcomte.fr> References: <20120130164504.7e21867d@maple> <4F290A4A.4040007@pu-pm.univ-fcomte.fr> Message-ID: <20120201122118.5e68da65@acer> On Wed, 01 Feb 2012 10:47:54 +0100 Eugen Dedu wrote: > skype should have a better echo cancellation system. Ekiga uses the > one provided by speex. > Where is the code which is responsible for echo cancellation in Ekiga? From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Feb 1 10:19:03 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 01 Feb 2012 11:19:03 +0100 Subject: [Ekiga-list] Acoustic feedback In-Reply-To: <20120201122118.5e68da65@acer> References: <20120130164504.7e21867d@maple> <4F290A4A.4040007@pu-pm.univ-fcomte.fr> <20120201122118.5e68da65@acer> Message-ID: <4F291197.7080609@pu-pm.univ-fcomte.fr> On 01/02/12 11:21, Genghis Khan wrote: > On Wed, 01 Feb 2012 10:47:54 +0100 > Eugen Dedu wrote: > >> skype should have a better echo cancellation system. Ekiga uses the >> one provided by speex. >> > Where is the code which is responsible for echo cancellation in Ekiga? In fact, it is opal, not ekiga itself. Look at ./src/codec/echocancel.cxx from opal library. -- Eugen From jpaulbiss at gmail.com Wed Feb 1 12:42:57 2012 From: jpaulbiss at gmail.com (J. Paul Bissonnette) Date: Wed, 1 Feb 2012 08:42:57 -0400 Subject: [Ekiga-list] Acoustic feedback In-Reply-To: <4F290A4A.4040007@pu-pm.univ-fcomte.fr> References: <20120130164504.7e21867d@maple> <4F290A4A.4040007@pu-pm.univ-fcomte.fr> Message-ID: <20120201084257.117a4b9b@maple> On Wed, 01 Feb 2012 10:47:54 +0100 Eugen Dedu wrote: > On 30/01/12 21:45, J. Paul Bissonnette wrote: > > I am wondering if I am missing a setting some where. > > The system is Xububtu 11.10, logitech webcam pro 9000, Bose > > companion speakers. The annoying issue is that is I have the volume > > loud enough to hear the speakers during an echo test the microphone > > is too sensitive and causes acoustic feed back. Echo cancellation > > is on, it does reduce the feedback considerably I have adjusted > > the jitter buffer from 200 - 1500 ms. this doesn''t seem to have > > much affect. > > > > With the same volume levels skype does not cause any feedback. > > skype should have a better echo cancellation system. Ekiga uses the > one provided by speex. > Thanks for the reply, wasn't sure if I would get one since I received a message stating I was not a member of this mailing list. I haven't used Ekiga that much since most of the people I know are still hung up on the Skype app. Since more are becoming aware that M$ acquired it, they are looking for an alternative. Thanks Paul From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Feb 2 07:32:23 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 02 Feb 2012 08:32:23 +0100 Subject: [Ekiga-list] Conference calls end after about 30 seconds In-Reply-To: <1327606646863-4331550.post@n4.nabble.com> References: <1327592990235-4330712.post@n4.nabble.com> <4F2198F9.3070403@pu-pm.univ-fcomte.fr> <1327606646863-4331550.post@n4.nabble.com> Message-ID: <4F2A3C07.4030408@pu-pm.univ-fcomte.fr> On 26/01/12 20:37, mikefender wrote: > Ok, i printed the output on this file, i hope this will help. > > 1) I launched Ekiga with -d 4 parameter > 2) I called sip:501 at ekiga.net > 3) The call ended after 30 seconds > 4) I closed Ekiga. > > http://ekiga.1756082.n4.nabble.com/file/n4331550/debug.txt debug.txt I see in your log the following problem: 2012/01/26 20:31:40.432 0:39.994 RTP Jitter:0xa60dc700 RTP_UDP Session 1, Data port on remote not ready. but I need more time to see where does this come from. Basically, it means it cannot write anymore on the socket (on the network), but why...? -- Eugen From genghiskhan at gmx.ca Thu Feb 2 08:08:46 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Thu, 2 Feb 2012 10:08:46 +0200 Subject: [Ekiga-list] Fw: Add a menu entry of "ekiga -d 4" output In-Reply-To: <4F11FF2E.4050802@davekoelmeyer.co.nz> References: <20120113123110.71cbf8f2@acer> <20120113182934.440eda4e@acer> <4F11FF2E.4050802@davekoelmeyer.co.nz> Message-ID: <20120202100846.48f14847@acer> On Sun, 15 Jan 2012 11:18:22 +1300 Dave Koelmeyer wrote: > On 01/14/12 05:29 AM, Genghis Khan wrote: > > On Fri, 13 Jan 2012 12:31:10 +0200 > > Genghis Khan wrote: > > > >> Add a menu item in the Help menu which will say "Auto-build a > >> report" "Analise and send" or "anything else", which will prompt > >> the user to a dialog which will explain shortly what is this > >> feature, what does it do and so on... and it will tell to the user > >> that Ekiga is going to restart itself and will generate a debug > >> file and there will be a link to the Users Mailing List or to both > >> Users (Help) and Devel (Development) Mailing Lists. > >> > >> Any thoughts? > > Well, I couldn't implement such a feature, but sounds good to me. > Should this be realized into a script? (as a separate command) $ ekiga-debug The script will display a box with instructions in the following manner: ----------------------------------------------------------- | | | ----------- ---------------------------------------- | | | | |Welcome to the Debugging Tool of Ekiga| | | | Icon of | | | | | | Ekiga | | TEXT | | | | | | TEXT | | | ----------- | ... | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ---------------------------------------- | |-------------------------------------------------------- | | ? Advanced View | Cancel | Back | Forward | | ----------------------------------------------------------- Maybe better to make it look like the Configuration Assistant. Instructions like. $ ekiga-debug Error: Ekiga is running. Close Ekiga and try again. On the Welcome dialog: Close Ekiga Run the command (ekiga-debug) Repeat the steps that caused to the problem. Exit Ekiga Or maybe even something like this: (Dialog has started) (The user is clicking on Next, while Ekiga is still running) Message: Ekiga is running, would you like to close it? (yes/no) (Closing Ekiga ... ... ...) Ekiga doesn't seem to be closing, would you like to terminate the process Ekiga? (yes/no) (Killing Ekiga...) etc. The script will compress the output (text) in whatever archiving format available (7z, gzip, tar, zip). The output will contain the version of Ekiga and date: Ekiga-3.3.2_YYYY-MM-DD.tar.gz A message of where the file was saved to. Enabling ? Advanced View will show the log writing in action in an embedded terminal within the dialog. $ tail -f Ekiga-3.3.2_YYYY-MM-DD.log Maybe some grep actions? or whatever on your mind. From stefaans.mostert at multichoice.co.za Thu Feb 2 09:09:35 2012 From: stefaans.mostert at multichoice.co.za (Stefaans Mostert) Date: Thu, 2 Feb 2012 11:09:35 +0200 Subject: [Ekiga-list] Lync In-Reply-To: <1881278733.13494.1328173717650.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> Message-ID: <205807700.13553.1328173775078.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> Mornin all I have been googling all morning, is there a way to setup a lync 2010 voice account with Ekiga? I have the chat working in pidgin. Stefaans Mostert Bytes Connect Back Office Engineer Bytes Connect - Back Office Tel: +27112896252 Mobile: +27844634590 Email: stefaans.mostert at multichoice.co.za Website: www.multichoice.co.za ?MultiChoice Africa (Pty) Ltd is an authorized financial services provider. FSP license number 11514.? THINK GREEN - CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. This electronic communication and the attached file(s) are subject to a disclaimer which can be viewed at http://www.multichoice.co.za/multichoice/view/multichoice/en/page21855. If you are unable to view the disclaimer, please email disclaimer at multichoice.co.za for a copy. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Feb 2 10:00:27 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 02 Feb 2012 11:00:27 +0100 Subject: [Ekiga-list] Lync In-Reply-To: <205807700.13553.1328173775078.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> References: <205807700.13553.1328173775078.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> Message-ID: <4F2A5EBB.60401@pu-pm.univ-fcomte.fr> On 02/02/12 10:09, Stefaans Mostert wrote: > > Mornin all > > I have been googling all morning, is there a way to setup a lync 2010 voice account with Ekiga? > I have the chat working in pidgin. Well, send us the -d 4 output of ekiga to see where the problem is. -- Eugen From stefaans.mostert at multichoice.co.za Thu Feb 2 10:50:00 2012 From: stefaans.mostert at multichoice.co.za (Stefaans Mostert) Date: Thu, 2 Feb 2012 12:50:00 +0200 Subject: [Ekiga-list] Lync In-Reply-To: <4F2A5EBB.60401@pu-pm.univ-fcomte.fr> Message-ID: <744730758.19913.1328179800621.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> I suspect this will work even better :-) http://pastebin.com/GYkt7UuN Sorry for the many replies guys Stefaans Mostert Bytes Connect Back Office Engineer Bytes Connect - Back Office Tel: +27112896252 Mobile: +27844634590 Email: stefaans.mostert at multichoice.co.za Website: www.multichoice.co.za ?MultiChoice Africa (Pty) Ltd is an authorized financial services provider. FSP license number 11514.? THINK GREEN - CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. ----- Original Message ----- > From: "Eugen Dedu" > To: "Ekiga mailing list" > Sent: Thursday, February 2, 2012 12:00:27 PM > Subject: Re: [Ekiga-list] Lync > On 02/02/12 10:09, Stefaans Mostert wrote: > > > > Mornin all > > > > I have been googling all morning, is there a way to setup a lync > > 2010 voice account with Ekiga? > > I have the chat working in pidgin. > Well, send us the -d 4 output of ekiga to see where the problem is. > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list This electronic communication and the attached file(s) are subject to a disclaimer which can be viewed at http://www.multichoice.co.za/multichoice/view/multichoice/en/page21855. If you are unable to view the disclaimer, please email disclaimer at multichoice.co.za for a copy. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Feb 2 10:57:00 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 02 Feb 2012 11:57:00 +0100 Subject: [Ekiga-list] Lync In-Reply-To: <744730758.19913.1328179800621.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> References: <744730758.19913.1328179800621.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> Message-ID: <4F2A6BFC.7070507@pu-pm.univ-fcomte.fr> On 02/02/12 11:50, Stefaans Mostert wrote: > I suspect this will work even better :-) > http://pastebin.com/GYkt7UuN I see that ekiga sends several packets, but it receives no answer. This is commonly because of a firewall which blocks all such traffic. You need to relax its rules, see http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually for example. >> From: "Eugen Dedu" >> To: "Ekiga mailing list" >> Sent: Thursday, February 2, 2012 12:00:27 PM >> Subject: Re: [Ekiga-list] Lync > >> On 02/02/12 10:09, Stefaans Mostert wrote: >>> >>> Mornin all >>> >>> I have been googling all morning, is there a way to setup a lync >>> 2010 voice account with Ekiga? >>> I have the chat working in pidgin. > >> Well, send us the -d 4 output of ekiga to see where the problem is. From genghiskhan at gmx.ca Fri Feb 3 02:02:36 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Fri, 3 Feb 2012 04:02:36 +0200 Subject: [Ekiga-list] Advertisements on Ekiga.org with OpenX? In-Reply-To: <20120201054106.2364f3ae@acer> References: <20120130202532.02f01f8f@acer> <4F271A24.4080905@gathman.org> <20120131085730.4bdc291e@acer> <87ipjrl6qt.fsf@ixod.org> <4F289E9E.9030907@gathman.org> <20120201054106.2364f3ae@acer> Message-ID: <20120203040236.1c708f90@acer> On Wed, 1 Feb 2012 05:41:06 +0200 Genghis Khan wrote: > On Tue, 31 Jan 2012 19:47:22 -0500 > "Mark T. B. Carroll" wrote: > > > Animated would have me finding a way to block it. Movement is really > > distracting when one's trying to read something else on the page. > > > Fair enough. > > On Tue, 31 Jan 2012 21:08:30 -0500 > Stuart Gathman wrote: > > > Is there a way to animate only on rollover without using flash? > > (Javascript knows when the mouse rolls over, but I'm not sure if it > > can start/stop GIF/PNG/JPEG animation.) If you're moving the mouse > > around anyway, the movement following the mouse is not so > > distracting (although reminiscent of a scene from Harry Potter). > > > I do not know if it can activate a CSS3 animation, though I believe > that it can if it did with CSS before. > > I recall seeing, a few years ago, a 300x300 image which started to > move like a "cube inside a screen" on mouse-over (Javascript was > disabled). When I was looking in the code of the page I have seen > that it was a 300x1800 image which had 6 different squares with 6 > different poses of that square. It was a cool trick which didn't > require high load of CPU. > > I dislike Javascript because it can detect my mouse cursor and what I > am copying, selecting etc. > > Maybe we would be able to get help on how to do reproduce this, from > users of http://userstyles.org/ or any other CSS discussion board. > This is newer than the example of the 300x300 animated cube http://www.webkit.org/blog/138/css-animation/ Still, the cube is something else. From stefaans.mostert at multichoice.co.za Fri Feb 3 09:00:36 2012 From: stefaans.mostert at multichoice.co.za (Stefaans Mostert) Date: Fri, 3 Feb 2012 11:00:36 +0200 Subject: [Ekiga-list] Lync In-Reply-To: <4F2A6BFC.7070507@pu-pm.univ-fcomte.fr> Message-ID: <1631295505.16308.1328259636807.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> Allo Everybody in the office usses lync, but from the microsoft client. Shouldn't ekiga then work? Or is there something I don't know about? Stefaans Mostert Bytes Connect Back Office Engineer Bytes Connect - Back Office Tel: +27112896252 Mobile: +27844634590 Email: stefaans.mostert at multichoice.co.za Website: www.multichoice.co.za ?MultiChoice Africa (Pty) Ltd is an authorized financial services provider. FSP license number 11514.? THINK GREEN - CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. ----- Original Message ----- > From: "Eugen Dedu" > To: "Ekiga mailing list" > Sent: Thursday, February 2, 2012 12:57:00 PM > Subject: Re: [Ekiga-list] Lync > On 02/02/12 11:50, Stefaans Mostert wrote: > > I suspect this will work even better :-) > > http://pastebin.com/GYkt7UuN > I see that ekiga sends several packets, but it receives no answer. > This > is commonly because of a firewall which blocks all such traffic. You > need to relax its rules, see > http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually for > example. > >> From: "Eugen Dedu" > >> To: "Ekiga mailing list" > >> Sent: Thursday, February 2, 2012 12:00:27 PM > >> Subject: Re: [Ekiga-list] Lync > > > >> On 02/02/12 10:09, Stefaans Mostert wrote: > >>> > >>> Mornin all > >>> > >>> I have been googling all morning, is there a way to setup a lync > >>> 2010 voice account with Ekiga? > >>> I have the chat working in pidgin. > > > >> Well, send us the -d 4 output of ekiga to see where the problem > >> is. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list This electronic communication and the attached file(s) are subject to a disclaimer which can be viewed at http://www.multichoice.co.za/multichoice/view/multichoice/en/page21855. If you are unable to view the disclaimer, please email disclaimer at multichoice.co.za for a copy. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Feb 3 14:13:02 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 03 Feb 2012 15:13:02 +0100 Subject: [Ekiga-list] Lync In-Reply-To: <1631295505.16308.1328259636807.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> References: <1631295505.16308.1328259636807.JavaMail.root@05rnb-zmb02.za.ds.naspers.com> Message-ID: <4F2BEB6E.8040404@pu-pm.univ-fcomte.fr> On 03/02/12 10:00, Stefaans Mostert wrote: > Allo > > Everybody in the office usses lync, but from the microsoft client. > Shouldn't ekiga then work? I see the problem. Cf. http://technet.microsoft.com/en-us/library/gg398833.aspx (especially the first two lines in the table), lync uses TCP only, while ekiga uses UDP only. That is the reason lync traffic is not blocked, while ekiga's one is. There is some work for ekiga to support TCP too, but someone needs to think seriously about it. For someone who has the knowledge of the code, it could be simple. Eugen >> From: "Eugen Dedu" >> To: "Ekiga mailing list" >> Sent: Thursday, February 2, 2012 12:57:00 PM >> Subject: Re: [Ekiga-list] Lync > >> On 02/02/12 11:50, Stefaans Mostert wrote: >>> I suspect this will work even better :-) >>> http://pastebin.com/GYkt7UuN > >> I see that ekiga sends several packets, but it receives no answer. >> This >> is commonly because of a firewall which blocks all such traffic. You >> need to relax its rules, see >> http://wiki.ekiga.org/index.php/Enable_port_forwarding_manually for >> example. > >>>> From: "Eugen Dedu" >>>> To: "Ekiga mailing list" >>>> Sent: Thursday, February 2, 2012 12:00:27 PM >>>> Subject: Re: [Ekiga-list] Lync >>> >>>> On 02/02/12 10:09, Stefaans Mostert wrote: >>>>> >>>>> Mornin all >>>>> >>>>> I have been googling all morning, is there a way to setup a lync >>>>> 2010 voice account with Ekiga? >>>>> I have the chat working in pidgin. >>> >>>> Well, send us the -d 4 output of ekiga to see where the problem >>>> is. From steve at nexusuk.org Fri Feb 3 17:30:13 2012 From: steve at nexusuk.org (Steve Hill) Date: Fri, 03 Feb 2012 17:30:13 +0000 Subject: [Ekiga-list] Problems registering Ekiga 3.3.2 behind NAT Message-ID: <4F2C19A5.6080400@nexusuk.org> I've got Ekiga 3.3.2 and Opal 3.10.2 set up to register with an Asterisk server. This works fine when not going through a NAT. When connecting via a NAT, Ekiga appears to unregister immediately. The output of ekiga -d 4 is available here: http://nexusuk.org/~steve/ekiga-nat-debug.txt Looking through that output, it seems that what happens is: 1. Ekiga registers with the Contact header containing its local IPv4 and IPv6 addresses. 2. Asterisk responds with an OK and the Contact header contains the local IPv4 address given in (1). The Via header contains the global IPv4 address that the original REGISTER appeared to come from after being NATted. 3. Ekiga spots that the connection has been NATted and sends a new REGISTER with a Contact header containing the local IPv4 address, and the global IPv4 address from the Via header in (2) 4. Asterisk responds with an OK but no Contact header 5. Ekiga sends 2 REGISTER requests, one with the Contact set to the global IPv4 address, the other with the Contact set to the local IPv4 address. 6. Asterisk responds with an OK and no contact header. I can't quite figure out whether its Asterisk or Ekiga doing the wrong thing. I can't understand why Asterisk would be responding to the REGISTER requests but supplying no Contact header. -- - Steve From rsamurti at gmail.com Fri Feb 3 18:09:45 2012 From: rsamurti at gmail.com (Anand Murthy) Date: Fri, 3 Feb 2012 18:09:45 +0000 (UTC) Subject: [Ekiga-list] Invitation to connect on LinkedIn Message-ID: <935933882.2562572.1328292585507.JavaMail.app@ela4-bed82.prod> LinkedIn ------------ Ekiga, I'd like to add you to my professional network on LinkedIn. - Anand Anand Murthy Assistant Professor and Head of the Department at S J College of Engineering Mysore Area, India Confirm that you know Anand Murthy: https://www.linkedin.com/e/-ftw4xo-gy7j3yg0-1l/isd/5782365718/kq30_z6I/?hs=false&tok=2vgGG6gnZxPl41 -- You are receiving Invitation to Connect emails. Click to unsubscribe: http://www.linkedin.com/e/-ftw4xo-gy7j3yg0-1l/iHa0zVPWVd4WovTXWBNiOEcPhdCMLPXV/goo/ekiga-list%40gnome%2Eorg/20061/I2011619776_1/?hs=false&tok=39bD3mXopxPl41 (c) 2012 LinkedIn Corporation. 2029 Stierlin Ct, Mountain View, CA 94043, USA. -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sat Feb 4 11:15:09 2012 From: sevmek at free.fr (Yannick) Date: Sat, 04 Feb 2012 12:15:09 +0100 Subject: [Ekiga-list] Advertisements on Ekiga.org with OpenX? In-Reply-To: <4F26DFE4.60205@seconix.com> References: <20120130202532.02f01f8f@acer> <4F26DFE4.60205@seconix.com> Message-ID: <1328354109.2812.10.camel@athena.fbx.proxad.net> Le lundi 30 janvier 2012 ? 19:22 +0100, Damien Sandras a ?crit : > I'm not against some targetted ads... How do we select one? I've read the whole thread, and the technical question is not a hard thing. But selecting one, having to follow it regarding quality of service, cost, interoperability etc. is a whole new thing for us and not a minor task as putting an ad on the web site is. From kresander at yahoo.com Sat Feb 4 13:27:38 2012 From: kresander at yahoo.com (Ken Resander) Date: Sat, 4 Feb 2012 05:27:38 -0800 (PST) Subject: [Ekiga-list] Recording incoming video and sound Message-ID: <1328362058.23482.YahooMailClassic@web39402.mail.mud.yahoo.com> would be a very useful feature, for example for weddings, baptismals and other family occasions, especially so when family and relatives are in different parts of the world. Then time zone differences can make viewing in real-time impossible or impractical. 'Save incoming video and sound data in disk file start/stop' on the menu could be the user interface. The saved disk file data should be playable in Movie Player, VLC etc. Would this feature be difficult to add to ekiga? Ken P.S. As far as I know incoming video and sound arrive as RTP packets and are? routed to the 'media player' function within Ekiga. Could this incoming data be saved 'as is' in a disk file and then used by Movie Players etc again 'as is'? I would like to have a look at the code to find out, but I don't know where to start. Source file name hints would be useful. -------------- next part -------------- An HTML attachment was scrubbed... URL: From x.rorikon.x at gmail.com Sat Feb 4 19:20:49 2012 From: x.rorikon.x at gmail.com (Enrique Allendes) Date: Sat, 4 Feb 2012 16:20:49 -0300 Subject: [Ekiga-list] proyect ekiga Message-ID: hey bro! amm proyect ekiga is dead? o stop? not have releace and update :/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From genghiskhan at gmx.ca Sat Feb 4 20:02:23 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Sat, 4 Feb 2012 22:02:23 +0200 Subject: [Ekiga-list] proyect ekiga In-Reply-To: References: Message-ID: <20120204220223.3c09166f@acer> On Sat, 4 Feb 2012 16:20:49 -0300 Enrique Allendes wrote: > hey bro! amm proyect ekiga is dead? o stop? not have releace and > update :/ > Ekiga 3.3.2 unstable is the latest version (2011-08-23). You can follow changes at http://git.gnome.org/browse/ekiga/ ATOM Feed: http://git.gnome.org/browse/ekiga/atom/?h=master Other information http://wiki.ekiga.org/index.php/Main_Page From x.rorikon.x at gmail.com Sun Feb 5 15:58:35 2012 From: x.rorikon.x at gmail.com (Enrique Allendes) Date: Sun, 5 Feb 2012 12:58:35 -0300 Subject: [Ekiga-list] proyect ekiga In-Reply-To: <20120204220223.3c09166f@acer> References: <20120204220223.3c09166f@acer> Message-ID: thnks! but no have information in ekiga.org and blog :/ thnks! amm you PPAin launchpad Ekiga unstable? 2012/2/4 Genghis Khan > On Sat, 4 Feb 2012 16:20:49 -0300 > Enrique Allendes wrote: > > > hey bro! amm proyect ekiga is dead? o stop? not have releace and > > update :/ > > > Ekiga 3.3.2 unstable is the latest version (2011-08-23). > You can follow changes at http://git.gnome.org/browse/ekiga/ > ATOM Feed: http://git.gnome.org/browse/ekiga/atom/?h=master > > Other information http://wiki.ekiga.org/index.php/Main_Page > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Sun Feb 5 21:27:11 2012 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 05 Feb 2012 22:27:11 +0100 Subject: [Ekiga-list] proyect ekiga In-Reply-To: References: <20120204220223.3c09166f@acer> Message-ID: <4F2EF42F.1000505@seconix.com> The last news on ekiga.org is 2 months old... I agree about the blog though. Ekiga is not dead, development is just slower than in the first years when I spent 4 hours a night on the project :-) Le 05/02/12 16:58, Enrique Allendes a ?crit : > thnks! but no have information in ekiga.org and > blog :/ thnks! amm you PPAin launchpad Ekiga unstable? > > 2012/2/4 Genghis Khan > > > On Sat, 4 Feb 2012 16:20:49 -0300 > Enrique Allendes > wrote: > > > hey bro! amm proyect ekiga is dead? o stop? not have releace and > > update :/ > > > Ekiga 3.3.2 unstable is the latest version (2011-08-23 > ). > You can follow changes at http://git.gnome.org/browse/ekiga/ > ATOM Feed: http://git.gnome.org/browse/ekiga/atom/?h=master > > Other information http://wiki.ekiga.org/index.php/Main_Page > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From x.rorikon.x at gmail.com Mon Feb 6 06:08:18 2012 From: x.rorikon.x at gmail.com (Enrique Allendes) Date: Mon, 6 Feb 2012 03:08:18 -0300 Subject: [Ekiga-list] proyect ekiga In-Reply-To: <4F2EF42F.1000505@seconix.com> References: <20120204220223.3c09166f@acer> <4F2EF42F.1000505@seconix.com> Message-ID: oh~ thnks! ekiga is nice!!! 2012/2/5 Damien Sandras > The last news on ekiga.org is 2 months old... > > I agree about the blog though. > > Ekiga is not dead, development is just slower than in the first years when > I spent 4 hours a night on the project :-) > > Le 05/02/12 16:58, Enrique Allendes a ?crit : > > thnks! but no have information in ekiga.org and blog :/ thnks! amm you > PPAin launchpad Ekiga unstable? > > 2012/2/4 Genghis Khan > >> On Sat, 4 Feb 2012 16:20:49 -0300 >> Enrique Allendes wrote: >> >> > hey bro! amm proyect ekiga is dead? o stop? not have releace and >> > update :/ >> > >> Ekiga 3.3.2 unstable is the latest version (2011-08-23). >> You can follow changes at http://git.gnome.org/browse/ekiga/ >> ATOM Feed: http://git.gnome.org/browse/ekiga/atom/?h=master >> >> Other information http://wiki.ekiga.org/index.php/Main_Page >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > > > > _______________________________________________ > ekiga-list mailing listekiga-list at gnome.orghttp://mail.gnome.org/mailman/listinfo/ekiga-list > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Feb 6 11:10:15 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 06 Feb 2012 12:10:15 +0100 Subject: [Ekiga-list] Problems registering Ekiga 3.3.2 behind NAT In-Reply-To: <4F2C19A5.6080400@nexusuk.org> References: <4F2C19A5.6080400@nexusuk.org> Message-ID: <4F2FB517.9050706@pu-pm.univ-fcomte.fr> On 03/02/12 18:30, Steve Hill wrote: > > I've got Ekiga 3.3.2 and Opal 3.10.2 set up to register with an Asterisk > server. This works fine when not going through a NAT. When connecting > via a NAT, Ekiga appears to unregister immediately. > > The output of ekiga -d 4 is available here: > http://nexusuk.org/~steve/ekiga-nat-debug.txt > > Looking through that output, it seems that what happens is: > 1. Ekiga registers with the Contact header containing its local IPv4 and > IPv6 addresses. > 2. Asterisk responds with an OK and the Contact header contains the > local IPv4 address given in (1). The Via header contains the global IPv4 > address that the original REGISTER appeared to come from after being > NATted. > 3. Ekiga spots that the connection has been NATted and sends a new > REGISTER with a Contact header containing the local IPv4 address, and > the global IPv4 address from the Via header in (2) > 4. Asterisk responds with an OK but no Contact header > 5. Ekiga sends 2 REGISTER requests, one with the Contact set to the > global IPv4 address, the other with the Contact set to the local IPv4 > address. > 6. Asterisk responds with an OK and no contact header. > > I can't quite figure out whether its Asterisk or Ekiga doing the wrong > thing. I can't understand why Asterisk would be responding to the > REGISTER requests but supplying no Contact header. Please ask the same question to opalvoip mailing list, opalvoip-user at lists.sourceforge.net -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Feb 6 11:14:29 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 06 Feb 2012 12:14:29 +0100 Subject: [Ekiga-list] Recording incoming video and sound In-Reply-To: <1328362058.23482.YahooMailClassic@web39402.mail.mud.yahoo.com> References: <1328362058.23482.YahooMailClassic@web39402.mail.mud.yahoo.com> Message-ID: <4F2FB615.6020609@pu-pm.univ-fcomte.fr> On 04/02/12 14:27, Ken Resander wrote: > would be a very useful feature, for example for weddings, baptismals and other family occasions, especially so when family and relatives are in different parts of the world. Then time zone differences can make viewing in real-time impossible or impractical. > > 'Save incoming video and sound data in disk file start/stop' on the menu could be the user interface. The saved disk file data should be playable in Movie Player, VLC etc. > > Would this feature be difficult to add to ekiga? > > P.S. As far as I know incoming video and sound arrive as RTP packets and are routed to the 'media player' function within Ekiga. Could this incoming data be saved 'as is' in a disk file and then used by Movie Players etc again 'as is'? I would like to have a look at the code to find out, but I don't know where to start. Source file name hints would be useful. You are right. There is a bug report for this, https://bugzilla.gnome.org/show_bug.cgi?id=330276. We just do not have enough time to work on it. The ongoing gstreamer support will probably solve this issue. -- Eugen From genghiskhan at gmx.ca Mon Feb 6 23:47:45 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Tue, 7 Feb 2012 01:47:45 +0200 Subject: [Ekiga-list] Experimenting with telnet and Ekiga In-Reply-To: <4F21A8A1.9090202@pu-pm.univ-fcomte.fr> References: <1327603934.84010.YahooMailClassic@web39402.mail.mud.yahoo.com> <4F21A8A1.9090202@pu-pm.univ-fcomte.fr> Message-ID: <20120207014745.53e21557@acer> On Thu, 26 Jan 2012 20:25:21 +0100 Eugen Dedu wrote: > On 26/01/12 19:52, Ken Resander wrote: > > In the past I have used telnet for practising with protocols like > > smtp, pop, ftp etc while reading the rfcs. For example, I could > > connect via telnet to an smtp server by entering telnet > > smtp.ntlworld 25 from the command line and then issue smtp commands > > and view the smtp responses from the server. Very useful! > > > > I would like to use telnet with ekiga in a similar way, for example > > by calling the echo test function at sip:500 at ekiga.net, issue > > INVITE, ACK, BYE etc and observe what happens. I tried connecting > > by entering: $ telnet ekiga.net Trying 86.64.162.35... telnet: > > Unable to connect to remote host: Connection refused > > > > and also: > > > > $ telnet ekiga.net 5060 > > Trying 86.64.162.35... > > telnet: Unable to connect to remote host: Connection refused > > > > but could get not beyond this point. > > Contrary to the protocols you used in the past which use TCP, SIP is > generally based on UDP, and ekiga.net uses UDP exclusively. As such, > telnet does not work. > I don't understand the context of these emails but I think that it will be ok to point out that TCP Support for SIP is in progress http://www.ekiga.org/roadmap (I hope that it has something to do with your messages) > If you want to play with, you can either use a script like the one > presented at https://bugzilla.gnome.org/show_bug.cgi?id=529082#c1, or > better use tiny programs doing configurable client and server work, I > do not remember what is their name... > From gleam.uahmed at gmail.com Tue Feb 7 22:36:47 2012 From: gleam.uahmed at gmail.com (uahmed) Date: Tue, 7 Feb 2012 14:36:47 -0800 Subject: [Ekiga-list] Compiling ekiga 2.7 version source code Message-ID: Hi I want to compile the source code of ekiga 2.7 can you please tell me how can i do that I folow steps from here http://wiki.ekiga.org/index.php/Building_Ekiga_for_Windows and which source acutually be downloaded by the makefile Regards Ahmed -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Feb 7 22:55:02 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 07 Feb 2012 23:55:02 +0100 Subject: [Ekiga-list] Compiling ekiga 2.7 version source code In-Reply-To: References: Message-ID: <4F31ABC6.8070507@pu-pm.univ-fcomte.fr> On 07/02/12 23:36, uahmed wrote: > Hi > > I want to compile the source code of ekiga 2.7 can you please tell me how > can i do that > > I folow steps from here > > http://wiki.ekiga.org/index.php/Building_Ekiga_for_Windows > > and which source acutually be downloaded by the makefile uahmed, do not send an e-mail to several mailing lists!! I do not understand your question. Just follow the steps on that page; use unstable version. -- Eugen From genghiskhan at gmx.ca Wed Feb 8 06:05:40 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Wed, 8 Feb 2012 08:05:40 +0200 Subject: [Ekiga-list] Compiling ekiga 2.7 version source code In-Reply-To: <4F31ABC6.8070507@pu-pm.univ-fcomte.fr> References: <4F31ABC6.8070507@pu-pm.univ-fcomte.fr> Message-ID: <20120208080540.5f959b45@acer> On Tue, 07 Feb 2012 23:55:02 +0100 Eugen Dedu wrote: > use unstable version. > Agreed. Most of the distributions have adopted the latest Ekiga 3.3.x series since it has solved severe connectivity issues. From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Feb 8 07:15:15 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Feb 2012 08:15:15 +0100 Subject: [Ekiga-list] Compiling ekiga 2.7 version source code In-Reply-To: <20120208080540.5f959b45@acer> References: <4F31ABC6.8070507@pu-pm.univ-fcomte.fr> <20120208080540.5f959b45@acer> Message-ID: <4F322103.7020005@pu-pm.univ-fcomte.fr> On 08/02/12 07:05, Genghis Khan wrote: > On Tue, 07 Feb 2012 23:55:02 +0100 > Eugen Dedu wrote: > >> use unstable version. >> > Agreed. Most of the distributions have adopted the latest Ekiga 3.3.x > series since it has solved severe connectivity issues. How do you know that those are the issues which lead to adopting ekiga 3.3.x? -- Eugen From genghiskhan at gmx.ca Wed Feb 8 08:57:05 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Wed, 8 Feb 2012 10:57:05 +0200 Subject: [Ekiga-list] Compiling ekiga 2.7 version source code In-Reply-To: <4F322103.7020005@pu-pm.univ-fcomte.fr> References: <4F31ABC6.8070507@pu-pm.univ-fcomte.fr> <20120208080540.5f959b45@acer> <4F322103.7020005@pu-pm.univ-fcomte.fr> Message-ID: <20120208105705.063ebdc3@acer> On Wed, 08 Feb 2012 08:15:15 +0100 Eugen Dedu wrote: > On 08/02/12 07:05, Genghis Khan wrote: > > On Tue, 07 Feb 2012 23:55:02 +0100 > > Eugen Dedu wrote: > > > >> use unstable version. > >> > > Agreed. Most of the distributions have adopted the latest Ekiga > > 3.3.x series since it has solved severe connectivity issues. > > How do you know that those are the issues which lead to adopting > ekiga 3.3.x? > I apologize, I should have point out that I believe/guess. Q: Why do I believe so? A: Many users that I know on Zenwalk, SalixOS, Slacky.eu and other Slackware communities as well in the #techrights (formerly Boycott Novell) IRC channel on Freenode who constantly complained about why Ekiga is working so slow, GUI is not responding and the calls get stuck. http://identi.ca/conversation/59917631 http://identi.ca/group/ekiga http://identi.ca/tag/ekiga From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Feb 8 09:11:40 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Feb 2012 10:11:40 +0100 Subject: [Ekiga-list] Compiling ekiga 2.7 version source code In-Reply-To: <20120208105705.063ebdc3@acer> References: <4F31ABC6.8070507@pu-pm.univ-fcomte.fr> <20120208080540.5f959b45@acer> <4F322103.7020005@pu-pm.univ-fcomte.fr> <20120208105705.063ebdc3@acer> Message-ID: <4F323C4C.9020306@pu-pm.univ-fcomte.fr> On 08/02/12 09:57, Genghis Khan wrote: > On Wed, 08 Feb 2012 08:15:15 +0100 > Eugen Dedu wrote: > >> On 08/02/12 07:05, Genghis Khan wrote: >>> On Tue, 07 Feb 2012 23:55:02 +0100 >>> Eugen Dedu wrote: >>> >>>> use unstable version. >>>> >>> Agreed. Most of the distributions have adopted the latest Ekiga >>> 3.3.x series since it has solved severe connectivity issues. >> >> How do you know that those are the issues which lead to adopting >> ekiga 3.3.x? >> > I apologize, I should have point out that I believe/guess. > > Q: Why do I believe so? > A: Many users that I know on Zenwalk, SalixOS, Slacky.eu and other > Slackware communities as well in the #techrights (formerly Boycott > Novell) IRC channel on Freenode who constantly complained about why > Ekiga is working so slow, GUI is not responding and the calls get stuck. > > http://identi.ca/conversation/59917631 The slow GUI surely appears when there are DNS problems. Ptlib made a workaround for that, found in ekiga 3.3.1 and later. > http://identi.ca/group/ekiga > http://identi.ca/tag/ekiga From genghiskhan at gmx.ca Wed Feb 8 09:44:49 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Wed, 8 Feb 2012 11:44:49 +0200 Subject: [Ekiga-list] Compiling ekiga 2.7 version source code In-Reply-To: <4F323C4C.9020306@pu-pm.univ-fcomte.fr> References: <4F31ABC6.8070507@pu-pm.univ-fcomte.fr> <20120208080540.5f959b45@acer> <4F322103.7020005@pu-pm.univ-fcomte.fr> <20120208105705.063ebdc3@acer> <4F323C4C.9020306@pu-pm.univ-fcomte.fr> Message-ID: <20120208114449.03934ab6@acer> On Wed, 08 Feb 2012 10:11:40 +0100 Eugen Dedu wrote: > On 08/02/12 09:57, Genghis Khan wrote: > > On Wed, 08 Feb 2012 08:15:15 +0100 > > Eugen Dedu wrote: > > > >> On 08/02/12 07:05, Genghis Khan wrote: > >>> On Tue, 07 Feb 2012 23:55:02 +0100 > >>> Eugen Dedu wrote: > >>> > >>>> use unstable version. > >>>> > >>> Agreed. Most of the distributions have adopted the latest Ekiga > >>> 3.3.x series since it has solved severe connectivity issues. > >> > >> How do you know that those are the issues which lead to adopting > >> ekiga 3.3.x? > >> > > I apologize, I should have point out that I believe/guess. > > > > Q: Why do I believe so? > > A: Many users that I know on Zenwalk, SalixOS, Slacky.eu and other > > Slackware communities as well in the #techrights (formerly Boycott > > Novell) IRC channel on Freenode who constantly complained about why > > Ekiga is working so slow, GUI is not responding and the calls get > > stuck. > > > > http://identi.ca/conversation/59917631 > > The slow GUI surely appears when there are DNS problems. Ptlib made > a workaround for that, found in ekiga 3.3.1 and later. Read further. http://identi.ca/notice/81131787 whirli at joindiaspora.com Ekiga Users Group !ekiga 3.3.1 working a lot better than 3.2.7. Thanks for the hard work people! > > http://identi.ca/group/ekiga > > http://identi.ca/tag/ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Feb 8 09:54:53 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Feb 2012 10:54:53 +0100 Subject: [Ekiga-list] Compiling ekiga 2.7 version source code In-Reply-To: <20120208114449.03934ab6@acer> References: <4F31ABC6.8070507@pu-pm.univ-fcomte.fr> <20120208080540.5f959b45@acer> <4F322103.7020005@pu-pm.univ-fcomte.fr> <20120208105705.063ebdc3@acer> <4F323C4C.9020306@pu-pm.univ-fcomte.fr> <20120208114449.03934ab6@acer> Message-ID: <4F32466D.2080305@pu-pm.univ-fcomte.fr> On 08/02/12 10:44, Genghis Khan wrote: > On Wed, 08 Feb 2012 10:11:40 +0100 > Eugen Dedu wrote: > >> On 08/02/12 09:57, Genghis Khan wrote: >>> On Wed, 08 Feb 2012 08:15:15 +0100 >>> Eugen Dedu wrote: >>> >>>> On 08/02/12 07:05, Genghis Khan wrote: >>>>> On Tue, 07 Feb 2012 23:55:02 +0100 >>>>> Eugen Dedu wrote: >>>>> >>>>>> use unstable version. >>>>>> >>>>> Agreed. Most of the distributions have adopted the latest Ekiga >>>>> 3.3.x series since it has solved severe connectivity issues. >>>> >>>> How do you know that those are the issues which lead to adopting >>>> ekiga 3.3.x? >>>> >>> I apologize, I should have point out that I believe/guess. >>> >>> Q: Why do I believe so? >>> A: Many users that I know on Zenwalk, SalixOS, Slacky.eu and other >>> Slackware communities as well in the #techrights (formerly Boycott >>> Novell) IRC channel on Freenode who constantly complained about why >>> Ekiga is working so slow, GUI is not responding and the calls get >>> stuck. >>> >>> http://identi.ca/conversation/59917631 >> >> The slow GUI surely appears when there are DNS problems. Ptlib made >> a workaround for that, found in ekiga 3.3.1 and later. > > Read further. > http://identi.ca/notice/81131787 > > whirli at joindiaspora.com Ekiga Users Group > !ekiga 3.3.1 working a lot better than 3.2.7. > Thanks for the hard work people! Excellent! -- Eugen From genghiskhan at gmx.ca Wed Feb 8 11:08:45 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Wed, 8 Feb 2012 13:08:45 +0200 Subject: [Ekiga-list] IRC channel activity Message-ID: <20120208130845.0ed36105@acer> The official Ekiga channel is located at the GNOME IRC Network Network: irc.gnome.org (also: irc.gimp.net) Channel: #ekiga Problem: There are plenty of potential users who are naturally starting at Freenode (because they are used that all of the free software projects are located on the Freenode network) instead of visiting http://ekiga.org/community and as long as they won't visit ekiga.org or as long as there is no one active in the channel to report where most of the users are (GNOME Network) those IRC users will leave us for good. Some of these users, so I believe, can contribute (support and even code) and revive the #ekiga IRC channel at the GNOME Network. Suggestion: A topic title should be placed at the IRC channel of Ekiga at Freenode (irc.freenode.org) which says: Welcome to Ekiga. The official channel has moved to irc.gnome.org, #ekiga. Please visit http://ekiga.org/community for more information. Currently, as it seems, there is one admin at the IRC channel of Ekiga at Freenode (irc.freenode.org). Can anyone take care about this issue? From geo.cherchetout at laposte.net Wed Feb 8 14:57:52 2012 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Wed, 08 Feb 2012 15:57:52 +0100 Subject: [Ekiga-list] Ekiga from git : No configure file & autogen.sh issue Message-ID: <4F328D70.6060307@laposte.net> Hello I have just installed ptlib v2_10 and opal v3_10 from svn and should like to install ekiga from git. In ekiga directory there is no configure file, so I guess perhaps I have to run autogen.sh, though this is not mentioned in README ? Unfortunately, this is what I get : $ cd ekiga $ ./autogen.sh checking for autoconf >= 2.53... testing autoconf2.50... not found. testing autoconf... found 2.68 checking for automake >= 1.8... testing automake-1.11... found 1.11.1 checking for libtool >= 1.4.3... testing libtoolize... found 2.4 checking for glib-gettext >= 2.2.0... testing glib-gettextize... found 2.28.6 checking for intltool >= 0.25... testing intltoolize... found 0.41.1 checking for pkg-config >= 0.14.0... testing pkg-config... found 0.25 checking for gnome-doc-utils >= 0.4.2... testing gnome-doc-prepare... found 0.20.5 Checking for required M4 macros... Checking for forbidden M4 macros... **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, please specify them on the `./autogen.sh' command line. skipping . -- directory is read only Running ./configure --enable-maintainer-mode ... /usr/bin/gnome-autogen.sh: ligne502: ./configure: Aucun fichier ou dossier de ce type My distrib is Mageia 1 64 bits. Perhaps somebody could help me ? 1000 TIA. From genghiskhan at gmx.ca Wed Feb 8 18:04:57 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Wed, 8 Feb 2012 20:04:57 +0200 Subject: [Ekiga-list] Urgent! Vote for Ekiga on LQ Message-ID: <20120208200457.3d38dc29@acer> P.S. this poll is completely biased since it is never being organized in a non-amateurish manner, but that's the forum admin... oh, well! Poll: VoIP Application of the Year http://www.linuxquestions.org/questions/2011-linuxquestions-org-members-choice-awards-95/voip-application-of-the-year-919893/ The poll is going to end tomorrow (less than 24 hours). There are less than 24 hours left to vote in the 2011 LinuxQuestions.org Members Choice Awards. Click here to go to the polls. Vote now and make sure your voice is heard! Software featured in the poll: Ekiga, Empathy, Jitsi, KPhone, Linphone, Mangler, Mumble, OpenSoftPhone, QuteCom, SFLphone, Skype, TeamSpeak, Twinkle, Yate Client. Vote to help to boost up the reputation of Ekiga and SIP. From geo.cherchetout at laposte.net Wed Feb 8 20:57:18 2012 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Wed, 08 Feb 2012 21:57:18 +0100 Subject: [Ekiga-list] Ekiga from git : No configure file & autogen.sh issue In-Reply-To: <4F328D70.6060307@laposte.net> References: <4F328D70.6060307@laposte.net> Message-ID: <4F32E1AE.3040909@laposte.net> On 02-08-2012 15:57, I wrote : > I have just installed ptlib v2_10 and opal v3_10 from svn and should like to > install ekiga from git. In ekiga directory there is no configure file, so I > guess perhaps I have to run autogen.sh, though this is not mentioned in README ? Sorry, I realize that I should be better using ekiga 3.3.2 source from http://ftp.gnome.org/pub/gnome/sources/ekiga/3.3/ So I have a configure file now. :-) But all is not perfect. Configure ends with this error message : ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ checking for GCONF... yes Using config source xml:merged:/etc/gconf/gconf.xml.defaults for schema installation Using $(sysconfdir)/gconf/schemas as install directory for schema files checking for EDS... no configure: error: Package requirements (libebook-1.2) were not met: No package 'libebook-1.2' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables EDS_CFLAGS and EDS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Yet, I have a libebook10 package providing ?/usr/lib/libebook-1.2.so.10 and ?/usr/lib/libebook-1.2.so.10.3.1. And there is no other libebook package in Mageia 1 mirrors. Same issue with PKG_CONFIG_PATH=/usr/lib64/pkgconfig:/usr/share/pkgconfig ./configure What to do, please ? From gio_6b at yahoo.it Thu Feb 9 14:59:32 2012 From: gio_6b at yahoo.it (Giorgio Tombola) Date: Thu, 9 Feb 2012 14:59:32 +0000 (GMT) Subject: [Ekiga-list] Urgent! Vote for Ekiga on LQ In-Reply-To: <20120208200457.3d38dc29@acer> References: <20120208200457.3d38dc29@acer> Message-ID: <1328799572.69701.YahooMailNeo@web29805.mail.ird.yahoo.com> Done! Next time please don't wait till last day. ________________________________ Da: Genghis Khan A: Ekiga Help & Support Inviato: Mercoled? 8 Febbraio 2012 19:04 Oggetto: [Ekiga-list] Urgent! Vote for Ekiga on LQ P.S. this poll is completely biased since it is never being organized in a non-amateurish manner, but that's the forum admin... oh, well! Poll: VoIP Application of the Year http://www.linuxquestions.org/questions/2011-linuxquestions-org-members-choice-awards-95/voip-application-of-the-year-919893/ The poll is going to end tomorrow (less than 24 hours). There are less than 24 hours left to vote in the 2011 LinuxQuestions.org Members Choice Awards. Click here to go to the polls. Vote now and make sure your voice is heard! Software featured in the poll: Ekiga, Empathy, Jitsi, KPhone, Linphone, Mangler, Mumble, OpenSoftPhone, QuteCom, SFLphone, Skype, TeamSpeak, Twinkle, Yate Client. Vote to help to boost up the reputation of Ekiga and SIP. _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From sbasurto at soft-gator.com Thu Feb 9 17:11:54 2012 From: sbasurto at soft-gator.com (Sergio Basurto) Date: Thu, 09 Feb 2012 11:11:54 -0600 Subject: [Ekiga-list] Ekiga 3.2.7 - falls off PBX, and on Linux, sometimes hangs Message-ID: <1328807514.6603.5.camel@localhost> I am using ekiga 3.2.7 in Debian, Windows and Gentoo: In gentoo works like a charm, but in Debian squeeze and windows, it freeze when I hang up, I research on Internet , but no solutions, any one knows about a solution?, I would like to use ekiga as my enterprise phone, but with this problem it can not be. Regards, -------------- next part -------------- An HTML attachment was scrubbed... URL: From genghiskhan at gmx.ca Thu Feb 9 21:09:13 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Thu, 9 Feb 2012 23:09:13 +0200 Subject: [Ekiga-list] [Linphone-users] [SFLphone] Urgent! Vote for SIP on LQ In-Reply-To: <1328799572.69701.YahooMailNeo@web29805.mail.ird.yahoo.com> References: <20120208200457.3d38dc29@acer> <1328799572.69701.YahooMailNeo@web29805.mail.ird.yahoo.com> Message-ID: <20120209230913.4b37c043@acer> On Thu, 9 Feb 2012 14:59:32 +0000 (GMT) Giorgio Tombola wrote: > Done! > Thanks. > Next time please don't wait till last day. > I'm sorry about it, I have found out about this two days ago, and yet I know that every year there is a vote for VoIP, Distributions, Audio Players etc. on this website forum. Next time we should all be aware of this vote for at least a month before it is closing and we all should promote non-Skype VoIP clients (preferably SIP clients) in order to promote open VoIP software like Ekiga, Linphone, SFLphone, Mumble (not SIP), QuteCom and others. Three (or even more) SIP clients, one setback (Skype) to overcome. Good luck to all of us at LQ in a year :-) P.S. this is not the only available poll or this year, we need to initiate some polls by ourselves. From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Feb 9 22:15:28 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 09 Feb 2012 23:15:28 +0100 Subject: [Ekiga-list] Ekiga from git : No configure file & autogen.sh issue In-Reply-To: <4F328D70.6060307@laposte.net> References: <4F328D70.6060307@laposte.net> Message-ID: <4F344580.6070404@pu-pm.univ-fcomte.fr> On 08/02/12 15:57, geo cherchetout wrote: > Hello > > I have just installed ptlib v2_10 and opal v3_10 from svn and should > like to install ekiga from git. In ekiga directory there is no configure > file, so I guess perhaps I have to run autogen.sh, though this is not > mentioned in README ? > > Unfortunately, this is what I get : > > $ cd ekiga > $ ./autogen.sh > checking for autoconf >= 2.53... > testing autoconf2.50... not found. > testing autoconf... found 2.68 > checking for automake >= 1.8... > testing automake-1.11... found 1.11.1 > checking for libtool >= 1.4.3... > testing libtoolize... found 2.4 > checking for glib-gettext >= 2.2.0... > testing glib-gettextize... found 2.28.6 > checking for intltool >= 0.25... > testing intltoolize... found 0.41.1 > checking for pkg-config >= 0.14.0... > testing pkg-config... found 0.25 > checking for gnome-doc-utils >= 0.4.2... > testing gnome-doc-prepare... found 0.20.5 > Checking for required M4 macros... > Checking for forbidden M4 macros... > **Warning**: I am going to run `configure' with no arguments. > If you wish to pass any to it, please specify them on the > `./autogen.sh' command line. > > skipping . -- directory is read only I think the problem is here. What does 'ls -ld ekiga' shows? If only w is not shown (why have you removed it?), execute 'chmod u+rwx ekiga'. For info, the code in gnome-autogen.sh is the following: elif [ ! -w $dirname ]; then echo skipping $dirname -- directory is read only > Running ./configure --enable-maintainer-mode ... > /usr/bin/gnome-autogen.sh: ligne502: ./configure: Aucun fichier ou > dossier de ce type -- Eugen From geo.cherchetout at laposte.net Thu Feb 9 22:50:21 2012 From: geo.cherchetout at laposte.net (geo cherchetout) Date: Thu, 09 Feb 2012 23:50:21 +0100 Subject: [Ekiga-list] Ekiga from git : No configure file & autogen.sh issue In-Reply-To: <4F344580.6070404@pu-pm.univ-fcomte.fr> References: <4F328D70.6060307@laposte.net> <4F344580.6070404@pu-pm.univ-fcomte.fr> Message-ID: <4F344DAD.205@laposte.net> On 02-09-2012 23:15, *Eugen Dedu* wrote : >> skipping . -- directory is read only > > I think the problem is here. What does 'ls -ld ekiga' shows? Sorry, Eugen, I have deleted all this stuff since I use ekiga 3.3.2 source from http://ftp.gnome.org/pub/gnome/sources/ekiga/3.3/ (But I download usually every stuff as the same user who try to compile and don't change the permissions...) Don't you see my wednesday 21:57 post ? From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Feb 10 07:21:02 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 10 Feb 2012 08:21:02 +0100 Subject: [Ekiga-list] Ekiga 3.2.7 - falls off PBX, and on Linux, sometimes hangs In-Reply-To: <1328807514.6603.5.camel@localhost> References: <1328807514.6603.5.camel@localhost> Message-ID: <4F34C55E.4080902@pu-pm.univ-fcomte.fr> On 09/02/12 18:11, Sergio Basurto wrote: > I am using ekiga 3.2.7 in Debian, Windows and Gentoo: > > In gentoo works like a charm, but in Debian squeeze and windows, it > freeze when I hang up, I research on Internet , but no solutions, any > one knows about a solution?, I would like to use ekiga as my enterprise > phone, but with this problem it can not be. We need the stack backtrace for linux and/or windows, see http://wiki.ekiga.org/index.php/Debugging_Ekiga -- Eugen From sbasurto at soft-gator.com Fri Feb 10 18:49:00 2012 From: sbasurto at soft-gator.com (Sergio Basurto) Date: Fri, 10 Feb 2012 12:49:00 -0600 Subject: [Ekiga-list] Ekiga 3.2.7 - falls off PBX, and on Linux, sometimes hangs In-Reply-To: <4F34C55E.4080902@pu-pm.univ-fcomte.fr> References: <1328807514.6603.5.camel@localhost> <4F34C55E.4080902@pu-pm.univ-fcomte.fr> Message-ID: <1328899740.6971.4.camel@localhost> On Fri, 2012-02-10 at 08:21 +0100, Eugen Dedu wrote: > On 09/02/12 18:11, Sergio Basurto wrote: > > I am using ekiga 3.2.7 in Debian, Windows and Gentoo: > > > > In gentoo works like a charm, but in Debian squeeze and windows, it > > freeze when I hang up, I research on Internet , but no solutions, any > > one knows about a solution?, I would like to use ekiga as my enterprise > > phone, but with this problem it can not be. > > We need the stack backtrace for linux and/or windows, see > http://wiki.ekiga.org/index.php/Debugging_Ekiga > I solve this uninstalling skype from debian, and I will do the same in windows. Now ekiga is running without problems. Nevertheless I will try to duplicate the error, if I do, I will post the debug result here. Thanks a lot. Rgards, -- Sergio Basurto Soft Gator S.A de C.V. -------------- next part -------------- An HTML attachment was scrubbed... URL: From el_gallo_azul at yahoo.com Sat Feb 11 02:01:47 2012 From: el_gallo_azul at yahoo.com (el_gallo_azul) Date: Fri, 10 Feb 2012 18:01:47 -0800 (PST) Subject: [Ekiga-list] User address book - would it be possible to use CardDAV as well as LDAP? Message-ID: <1328925707.26857.YahooMailNeo@web160302.mail.bf1.yahoo.com> The reason I ask is that I use Yahoo! mail contacts as my main address book, and I would like to be able to call this up from SIP applications such as Ekiga. I recently contacted Yahoo! to ask whether their contacts were stored (and accessible) in LDAP form. They responded that they are not, and that they use the CardDAV protocol/standards. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Feb 11 13:33:03 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 11 Feb 2012 14:33:03 +0100 Subject: [Ekiga-list] User address book - would it be possible to use CardDAV as well as LDAP? In-Reply-To: <1328925707.26857.YahooMailNeo@web160302.mail.bf1.yahoo.com> References: <1328925707.26857.YahooMailNeo@web160302.mail.bf1.yahoo.com> Message-ID: <4F366E0F.6080401@pu-pm.univ-fcomte.fr> On 11/02/12 03:01, el_gallo_azul wrote: > The reason I ask is that I use Yahoo! mail contacts as my main address book, and I would like to be able to call this up from SIP applications such as Ekiga. > > I recently contacted Yahoo! to ask whether their contacts were stored (and accessible) in LDAP form. They responded that they are not, and that they use the CardDAV protocol/standards. It would be useful, but not for soon. Please make a bug report for that. -- Eugen From jpuydt at free.fr Sat Feb 11 13:44:43 2012 From: jpuydt at free.fr (Julien Puydt) Date: Sat, 11 Feb 2012 14:44:43 +0100 Subject: [Ekiga-list] User address book - would it be possible to use CardDAV as well as LDAP? In-Reply-To: <4F366E0F.6080401@pu-pm.univ-fcomte.fr> References: <1328925707.26857.YahooMailNeo@web160302.mail.bf1.yahoo.com> <4F366E0F.6080401@pu-pm.univ-fcomte.fr> Message-ID: <20120211144443.5298e842@newton.localdomain> Le samedi 11 f?vrier, Eugen Dedu a ?crit: > On 11/02/12 03:01, el_gallo_azul wrote: > > The reason I ask is that I use Yahoo! mail contacts as my main > > address book, and I would like to be able to call this up from SIP > > applications such as Ekiga. > > > > I recently contacted Yahoo! to ask whether their contacts were > > stored (and accessible) in LDAP form. They responded that they are > > not, and that they use the CardDAV protocol/standards. > > It would be useful, but not for soon. Please make a bug report for > that. If there's a lib for that, it should be pretty easy to use it in ekiga, but there will still be some code to write. Snark on #ekiga From genghiskhan at gmx.ca Mon Feb 13 13:57:48 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Mon, 13 Feb 2012 15:57:48 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120208130845.0ed36105@acer> References: <20120208130845.0ed36105@acer> Message-ID: <20120213155748.3ad28707@acer> Thank you yannick for setting up a title: Welcome to Ekiga || Damien's Blog: http://blog.ekiga.net/ || Ekiga 3.3.2 [UNSTABLE] is out || Ekiga 3.2.7 [STABLE] We still need to set a title on Freenode. Suggestion: adding an IRC Bot which will notify on updates. There is a project called TOPfeeder Python RSS-IRC bot (Python) http://sourceforge.net/projects/pytopfeeder/ Requirements: Python 2.5.4 and 2.6.0 TinyUrl module http://pypi.python.org/pypi/TinyUrl MySQL module http://sourceforge.net/projects/mysql-python/ MySQL There is a file named SQL.sql INSERT INTO `feeds` (`id`, `command`, `url`, `nick`, `date`) VALUES (1, '.git', 'http://git.gnome.org/browse/ekiga/atom/?h=master', 'Recent GIT activity', ''), (2, '.dml', 'http://www.mail-archive.com/ekiga-devel-list at gnome.org/maillist.xml', 'ekiga-devel-list', ''), (3, '.uml', ''http://www.mail-archive.com/ekiga-list at gnome.org/maillist.xml, 'ekiga-list', ''), I will look up for something that doesn't require MySQL. On Wed, 8 Feb 2012 13:08:45 +0200 Genghis Khan wrote: > The official Ekiga channel is located at the GNOME IRC Network > > Network: irc.gnome.org (also: irc.gimp.net) > Channel: #ekiga > > > Problem: > There are plenty of potential users who are naturally starting at > Freenode (because they are used that all of the free software projects > are located on the Freenode network) instead of visiting > http://ekiga.org/community and as long as they won't visit ekiga.org > or as long as there is no one active in the channel to report where > most of the users are (GNOME Network) those IRC users will leave us > for good. > > Some of these users, so I believe, can contribute (support and even > code) and revive the #ekiga IRC channel at the GNOME Network. > > > Suggestion: > A topic title should be placed at the IRC channel of Ekiga at Freenode > (irc.freenode.org) which says: > Welcome to Ekiga. The official channel has moved to irc.gnome.org, > #ekiga. Please visit http://ekiga.org/community for more information. > > Currently, as it seems, there is one admin at the IRC channel of Ekiga > at Freenode (irc.freenode.org). > > Can anyone take care about this issue? > From genghiskhan at gmx.ca Mon Feb 13 14:28:11 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Mon, 13 Feb 2012 16:28:11 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120213155748.3ad28707@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> Message-ID: <20120213162811.60ec20a9@acer> On Mon, 13 Feb 2012 15:57:48 +0200 Genghis Khan wrote: > Suggestion: adding an IRC Bot which will notify on updates. > [Perl] Irc Rss Feed Bot By Emery http://www.governmentsecurity.org/forum/topic/32441-perl-irc-rss-feed-bot/ https://emery8.wordpress.com/2010/01/19/3/ From genghiskhan at gmx.ca Mon Feb 13 15:16:57 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Mon, 13 Feb 2012 17:16:57 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120213162811.60ec20a9@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> <20120213162811.60ec20a9@acer> Message-ID: <20120213171657.0741f0e4@acer> On Mon, 13 Feb 2012 16:28:11 +0200 Genghis Khan wrote: > On Mon, 13 Feb 2012 15:57:48 +0200 > Genghis Khan wrote: > > > Suggestion: adding an IRC Bot which will notify on updates. > > > [Perl] Irc Rss Feed Bot By Emery > http://www.governmentsecurity.org/forum/topic/32441-perl-irc-rss-feed-bot/ > https://emery8.wordpress.com/2010/01/19/3/ > I'm trying to use this Python script but I'm not succeeding in doing so https://kstars.wordpress.com/2009/09/05/a-python-irc-bot-for-keeping-up-with-arxiv-or-any-rss-feed/ http://paste.org/18008 http://paste.org/30736 Modules: irclib http://pypi.python.org/pypi/python-irclib/0.4.8 (I guess) feedparser http://pypi.python.org/pypi/feedparser/5.1 I'm getting an error from the IRC library module: $ python rss Traceback (most recent call last): File "rss", line 22, in server.connect( "irc.gimp.net", 6667, "luna" ) # TODO: Make this general File "/home/luna/RSS/irclib.py", line 439, in connect raise ServerConnectionError, "Couldn't connect to socket: %s" % x irclib.ServerConnectionError: Couldn't connect to socket: [Errno 110] Connection timed out It seems that it is reading the feeds (the file old-feed-entries is being changed) Please help me with it. From genghiskhan at gmx.ca Mon Feb 13 19:08:58 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Mon, 13 Feb 2012 21:08:58 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120213162811.60ec20a9@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> <20120213162811.60ec20a9@acer> Message-ID: <20120213210858.7e6e3fb6@acer> On Mon, 13 Feb 2012 16:28:11 +0200 Genghis Khan wrote: > On Mon, 13 Feb 2012 15:57:48 +0200 > Genghis Khan wrote: > > > Suggestion: adding an IRC Bot which will notify on updates. > > > [Perl] Irc Rss Feed Bot By Emery > http://www.governmentsecurity.org/forum/topic/32441-perl-irc-rss-feed-bot/ > https://emery8.wordpress.com/2010/01/19/3/ > The Perl script is very interesting and I still want to try it out. BUT I HAVE A SOLUTION, it is called GOZERBOT http://gozerbot.org/ An IRC and Jabber/XMPP bot project which is in active development for over 10 years and this project is well ordered. There are plenty of plugins and among them there is a RSS plugin which is now being tested at #ekiga (freenode and gnome IRC networks) Example: [08:24:59 PM] gozerbot: Ekiga-Devel-List: [Ekiga-devel-list] Closing ekiga - Extract the TAR archive to a directory and follow the following steps: The owners are being set in ./gozerbot-1.0.1/gozerdata/mainconfig Start the bot with $ python ./bin/gozerbot --server=irc.gimp.net --channel='#ekiga' ____________________ Adding bot operators - users who are allowed to control the bot can be added by the owner with the !meet command: Owner: !meet TheBonsai gozerbot: TheBonsai (thebonsai) added to user database _______________________ Enabling the RSS plugin Owner: !plug-enable rss gozerbot: trying to reload: rss gozerbot: enabled plugins: rss ________________ Adding Web Feeds - http://gozerbot.org/plugs/rss.html Owner: !rss-add Ekiga-Devel-List http://www.mail-archive.com/ekiga-devel-list at gnome.org/maillist.xml gozerbot: rss item added __________ Activating Owner: !rss-watch Ekiga-Devel-List gozerbot: watcher started Owner: !rss-start Ekiga-Devel-List gozerbot: started: Ekiga-Devel-List Owner: !rss-running gozerbot: running rss watchers: 1) Ekiga-List [[u'default', u'#ekiga']] 2) Damien-Sandras [['default', u'#ekiga']] 3) Mathaba-News [[u'default', u'#ekiga']] 4) Ekiga-Devel-List [[u'default', u'#ekiga']] 5) Ekiga-Git [[u'default', u'#ekiga']] There is already a title for the mailing-lists so just naming them to EDL (the devel list) and EUL (the help list) will suffice. __________ Moderating (reloading period rate) Owner: !rss-sleeptime Ekiga-Devel-List gozerbot: sleeptime for Ekiga-Devel-List is 1800 seconds Owner: !rss-setsleeptime Ekiga-Devel-List 14400 gozerbot: sleeptime for Ekiga-Devel-List is 14400 seconds This tool will provide productivity and will assist in increasing the activity in the #ekiga IRC channel. -- GOZERBOT http://gozerbot.org/ email: bthate at gmail.com jabber/xmpp: bthate at gmail.com IRC: botfather on #dunkbots irc.freenode.net twitter: http://twitter.com/jsonbot From genghiskhan at gmx.ca Mon Feb 13 19:19:33 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Mon, 13 Feb 2012 21:19:33 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120213210858.7e6e3fb6@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> <20120213162811.60ec20a9@acer> <20120213210858.7e6e3fb6@acer> Message-ID: <20120213211933.1147b044@acer> On Mon, 13 Feb 2012 21:08:58 +0200 Genghis Khan wrote: > Example: > [08:24:59 PM] gozerbot: Ekiga-Devel-List: [Ekiga-devel-list] Closing > ekiga - To disable TinyURL generation: !rss-addmarkup tinyurl 0 More info: http://gozerbot.org/plugs/rss.html 19. rss-markuplist .. [handle_rssmarkuplist] description: [] permissions: USER code: rss-markuplist command. examples: !rss-markuplist skipmerge: set this to 1 if you want to skip merge commits tinyurl: set this to 1 when you want to use tinyurls striphtml: strip html from output all-lines: set this to 1 if you don't want items to be aggregated separator: set this to desired item separator reverse-order: set this to 1 if you want the rss items displayed with oldest item first From genghiskhan at gmx.ca Mon Feb 13 20:01:39 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Mon, 13 Feb 2012 22:01:39 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120213211933.1147b044@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> <20120213162811.60ec20a9@acer> <20120213210858.7e6e3fb6@acer> <20120213211933.1147b044@acer> Message-ID: <20120213220139.3ddcfb68@acer> On Mon, 13 Feb 2012 21:19:33 +0200 Genghis Khan wrote: > On Mon, 13 Feb 2012 21:08:58 +0200 > Genghis Khan wrote: > > > Example: > > [08:24:59 PM] gozerbot: Ekiga-Devel-List: [Ekiga-devel-list] Closing > > ekiga - > > To disable TinyURL generation: > !rss-addmarkup tinyurl 0 > Correction: !rss-addmarkup !rss-addmarkup Ekiga-Devel-List tinyurl 0 > > More info: http://gozerbot.org/plugs/rss.html > > 19. rss-markuplist .. [handle_rssmarkuplist] > description: [] > permissions: USER > code: rss-markuplist command. > examples: > > !rss-markuplist > skipmerge: set this to 1 if you want to skip merge commits > tinyurl: set this to 1 when you want to use tinyurls > striphtml: strip html from output > all-lines: set this to 1 if you don't want items to be > aggregated > separator: set this to desired item separator > reverse-order: set this to 1 if you want the rss items > displayed with oldest item first > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From genghiskhan at gmx.ca Tue Feb 14 05:57:58 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Tue, 14 Feb 2012 07:57:58 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120213155748.3ad28707@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> Message-ID: <20120214075758.2f5f2388@acer> On Mon, 13 Feb 2012 15:57:48 +0200 Genghis Khan wrote: > Thank you yannick for setting up a title: > Welcome to Ekiga || Damien's Blog: http://blog.ekiga.net/ || Ekiga > 3.3.2 [UNSTABLE] is out || Ekiga 3.2.7 [STABLE] > > We still need to set a title on Freenode. We can use the Greeting plugin of GOZERBOT until someone will maange to setup a constant title that will last for months. Owner: !plug-enable greeting gozerbot: enabled plugins: greeting Owner: !greeting-add Welcome to Ekiga. For the official channel please join to #ekiga at the GNOME IRC Network (irc.gnome.org). Have a nice day :-) gozerbot: greeting message added Owner: !greeting-on gozerbot: done When a will join to #ekiga at Freenode the following message will appear: gozerbot: , Welcome to Ekiga. For the official channel please join to #ekiga at the GNOME IRC Network (irc.gnome.org). Have a nice day :-) *Change in accord to current holidays, e.g. Marry Christmas, if you like May someone please take care of it? I don't have a stable resource available, yet, to manage this bot, mainly because of connection interruptions. -- GOZERBOT http://gozerbot.org/ email: bthate at gmail.com jabber/xmpp: bthate at gmail.com IRC: botfather on #dunkbots irc.freenode.net twitter: http://twitter.com/jsonbot From genghiskhan at gmx.ca Tue Feb 14 09:17:19 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Tue, 14 Feb 2012 11:17:19 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120214075758.2f5f2388@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> <20120214075758.2f5f2388@acer> Message-ID: <20120214111719.76629a59@acer> On Tue, 14 Feb 2012 07:57:58 +0200 Genghis Khan wrote: > May someone please take care of it? > I don't have a stable resource available, yet, to manage this bot, > mainly because of connection interruptions. If you like you can join to Freenode and GNOME anonymously by using XMPP $ python ./bin/gozerbot --server= --channel="ekiga%irc.gimp.net at irc.limun.org" --channel="ekiga%irc.freenode.net at irc.limun.org" --type=xmpp --user= --pass= ekiga (IRC channel) irc.gimp.net (IRC server) irc.limun.org (Jabber gateway to IRC) irc-channel%irc-server at jabber-gateway-to-irc Setting owners is different (realization) Public chat at #ekiga channel GenghisKhan: !test Console [2012-02-14 09:39:08,768] (users) ekiga%irc.freenode.net at irc.limun.org/GenghisKhan userhost denied If GenghisKhan will send a private message to the bot Console [2012-02-14 09:43:41,907] (users) GenghisKhan!irc.freenode.net at irc.limun.org userhost denied Freenode Public channel: ekiga%irc.freenode.net at irc.limun.org/ Direct message: !irc.freenode.net at irc.limun.org GNOME Public channel: ekiga%irc.gimp.net at irc.limun.org/ Direct message: !irc.gimp.net at irc.limun.org File: ./gozerbot-1.0.1/gozerdata/mainconfig owner = ["ekiga%irc.gimp.net at irc.limun.org/TheBonsai", "TheBonsai!irc.gimp.net at irc.limun.org", "ekiga%irc.freenode.net at irc.limun.org/TheBonsai", "TheBonsai!irc.freenode.net at irc.limun.org"] More information about Jabber/XMPP gateways to IRC http://psi-im.org/wiki/Gateway From genghiskhan at gmx.ca Tue Feb 14 09:43:41 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Tue, 14 Feb 2012 11:43:41 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120214075758.2f5f2388@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> <20120214075758.2f5f2388@acer> Message-ID: <20120214114341.00539294@acer> On Tue, 14 Feb 2012 07:57:58 +0200 Genghis Khan wrote: > We can use the Greeting plugin of GOZERBOT until someone will maange > to setup a constant title that will last for months. > > Owner: !plug-enable greeting > gozerbot: enabled plugins: greeting > > Owner: !greeting-add Welcome to Ekiga. For the official channel > please join to #ekiga at the GNOME IRC Network (irc.gnome.org). Have a > nice day :-) > gozerbot: greeting message added > > Owner: !greeting-on > gozerbot: done > > > When a will join to #ekiga at Freenode the following message > will appear: > > gozerbot: , Welcome to Ekiga. For the official channel > please join to #ekiga at the GNOME IRC Network (irc.gnome.org). Have a > nice day :-) > > *Change in accord to current holidays, e.g. Marry Christmas, if you > like These commands should be executed at #ekiga (freenode) * Commands applied only to the channels in which they were executed at. From genghiskhan at gmx.ca Tue Feb 14 11:58:56 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Tue, 14 Feb 2012 13:58:56 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120213210858.7e6e3fb6@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> <20120213162811.60ec20a9@acer> <20120213210858.7e6e3fb6@acer> Message-ID: <20120214135856.73e65af1@acer> Dear fellow SIP users, This email was sent to Ekiga, Jitsi, Linphone, QuteCom, and SFLphone in order to promote a shared aspiration which is decentralized VoIP. This is a part of a thread which I have originally started in the Ekiga Users Mailing List (Support & Help). ______ Issue: Using IRC Bot to display updates from RSS feeds in order to get more audience, reputation, productivity and activity. IRC Bot Software: GOZERBOT http://gozerbot.org/ (BSD License) Since the fact that some of us are volunteers and not everyone of us has enough resources, enough time, enough experience then it would be best to all of us to have the most proper bot manager that can be. This subject is relevant to all of you I propose on registering a new user at the Freenode IRC Network with the name "SIP-Bot" which the bot will use and serve all the VoIP project channels. The following instrucations are relevant to everyone, despite the fact that it is specifically aimed at Ekiga. ______ Topic: Setting up the bot to scan and post news titles of Web Feeds Commands to be executed at #ekiga (gnome) __________________ Enable RSS Plugin: Owner: !plug-enable rss gozerbot: trying to reload: rss gozerbot: enabled plugins: rss _________________ Adding Web Feeds: !rss-add News http://www.ekiga.org/rss.xml !rss-add Ekiga_Documentation_Project http://wiki.ekiga.org/index.php?title=Special:RecentChanges&feed=atom !rss-add EDL http://www.mail-archive.com/ekiga-devel-list at gnome.org/maillist.xml !rss-add EUL http://www.mail-archive.com/ekiga-list at gnome.org/maillist.xml !rss-add Damien_Sandras http://blog.ekiga.net/?feed=rss2 !rss-add GIT http://git.gnome.org/browse/ekiga/atom/?h=master !rss-add OpalVoip http://www.opalvoip.org/index.php?format=feed&type=rss !rss-add GS http://gstreamer.freedesktop.org/news/rss-1.0.xml !rss-add News https://www.linphone.org/feed.rss.html !rss-add LU http://www.mail-archive.com/linphone-users at nongnu.org/maillist.xml !rss-add News http://identi.ca/sflphone/rss !rss-add Activity https://projects.savoirfairelinux.com/projects/sflphone/activity.atom !rss-add SFLP http://www.mail-archive.com/sflphone at lists.savoirfairelinux.net/maillist.xml !rss-add qutecom-dev http://www.mail-archive.com/qutecom-dev at lists.qutecom.org/maillist.xml @QuteCom Please add a StatusNet profile at http://identi.ca/ if you don't have your own ATOM/RSS feed. !rss-add News http://identi.ca/jitsi/rss @Jitsi Not Found http://www.mail-archive.com/*****@jitsi.java.net/maillist.xml * Feeds that are relevant to all of us: !rss-add GNU_Telephony http://planet.gnu.org/gnutelephony/?feed=rss2 !rss-add SOS https://github.com/skypeopensource.atom * EDL, EUL, GS, LU, SFLP and SOS were shortened because each of them already has its title in each feed entry. * Concerning to "?" Activity, "?" News and "?" GIT Each feed has its own place in its own related channel! ______________________ Starting up the Feeds: !rss-watch News !rss-start News !rss-watch GIT !rss-start GIT !rss-watch GNU_Telephony !rss-start GNU_Telephony etc... ________________ Disable TinyURL: Owner: !rss-markup git gozerbot: {u'tinyurl': 1} Owner: !rss-addmarkup git tinyurl 0 gozerbot: tinyurl added to (git,#ekiga) markuplist Owner: !rss-markup git gozerbot: {u'tinyurl': 0} ___________________ Change reload time: Default reload period as it seems is 1800 seconds (30 minutes) Suggestion for period cycles: Two (2) hours for the lists. Four (4) for the activity at GIT. (or less. you diced) Six (6) hours or Eighteen (18) hours or a few days for the VoIP project news blogs). Owner: !rss-sleeptime git gozerbot: sleeptime for git is 1800 seconds Owner: !rss-setsleeptime git 7200 gozerbot: sleeptime set Owner: !rss-sleeptime git gozerbot: sleeptime for git is 7200 seconds THE BOT IS READY! These commands should be executed at #ekiga (gnome) * Commands applied only to the channels in which they were executed at. @ Seeing activity from the bot will urge newcomers to ask questions, express interest in Ekiga and to actively participate instead of going away and forget about Ekiga, and open VoIP. @ Voices are matter, we also need voices in the Documentation Projects. Little note to Jitsi and SFLphone: Thank you for bothering to open StatusNet account at http://identi.ca/ (I've never used twitter) -- GOZERBOT http://gozerbot.org/ email: bthate at gmail.com jabber/xmpp: bthate at gmail.com IRC: botfather on #dunkbots irc.freenode.net twitter: http://twitter.com/jsonbot On Mon, 13 Feb 2012 21:08:58 +0200 Genghis Khan wrote: > On Mon, 13 Feb 2012 16:28:11 +0200 > Genghis Khan wrote: > > > On Mon, 13 Feb 2012 15:57:48 +0200 > > Genghis Khan wrote: > > > > > Suggestion: adding an IRC Bot which will notify on updates. > > > > > [Perl] Irc Rss Feed Bot By Emery > > http://www.governmentsecurity.org/forum/topic/32441-perl-irc-rss-feed-bot/ > > https://emery8.wordpress.com/2010/01/19/3/ > > > > The Perl script is very interesting and I still want to try it out. > > > BUT I HAVE A SOLUTION, it is called GOZERBOT http://gozerbot.org/ > An IRC and Jabber/XMPP bot project which is in active development > for over 10 years and this project is well ordered. > > There are plenty of plugins and among them there is a RSS plugin which > is now being tested at #ekiga (freenode and gnome IRC networks) > > > Example: > [08:24:59 PM] gozerbot: Ekiga-Devel-List: [Ekiga-devel-list] Closing > ekiga - > > > Extract the TAR archive to a directory and follow the following steps: > > The owners are being set in > ./gozerbot-1.0.1/gozerdata/mainconfig > > Start the bot with > $ python ./bin/gozerbot --server=irc.gimp.net --channel='#ekiga' > > > ____________________ > Adding bot operators - users who are allowed to control the bot can be > added by the owner with the !meet command: > Owner: !meet TheBonsai > gozerbot: TheBonsai (thebonsai) added to user database > > _______________________ > Enabling the RSS plugin > Owner: !plug-enable rss > gozerbot: trying to reload: rss > gozerbot: enabled plugins: rss > > ________________ > Adding Web Feeds - http://gozerbot.org/plugs/rss.html > Owner: !rss-add Ekiga-Devel-List > http://www.mail-archive.com/ekiga-devel-list at gnome.org/maillist.xml > gozerbot: rss item added > > __________ > Activating > Owner: !rss-watch Ekiga-Devel-List > gozerbot: watcher started > > Owner: !rss-start Ekiga-Devel-List > gozerbot: started: Ekiga-Devel-List > > Owner: !rss-running > gozerbot: running rss watchers: 1) Ekiga-List [[u'default', > u'#ekiga']] 2) Damien-Sandras [['default', u'#ekiga']] 3) Mathaba-News > [[u'default', u'#ekiga']] 4) Ekiga-Devel-List [[u'default', > u'#ekiga']] 5) Ekiga-Git [[u'default', u'#ekiga']] > > There is already a title for the mailing-lists so just naming them to > EDL (the devel list) and EUL (the help list) will suffice. > > __________ > Moderating (reloading period rate) > Owner: !rss-sleeptime Ekiga-Devel-List > gozerbot: sleeptime for Ekiga-Devel-List is 1800 seconds > > Owner: !rss-setsleeptime Ekiga-Devel-List 14400 > gozerbot: sleeptime for Ekiga-Devel-List is 14400 seconds > > > This tool will provide productivity and will assist in increasing the > activity in the #ekiga IRC channel. > From genghiskhan at gmx.ca Tue Feb 14 18:44:22 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Tue, 14 Feb 2012 20:44:22 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120214135856.73e65af1@acer> References: <20120208130845.0ed36105@acer> <20120213155748.3ad28707@acer> <20120213162811.60ec20a9@acer> <20120213210858.7e6e3fb6@acer> <20120214135856.73e65af1@acer> Message-ID: <20120214204422.78cec241@acer> Naming the bot (optional) There is an argument --name=Ekiga_Bot Using it will result in a new directory and files in ./gozerbot-1.0.1/gozerdata/fleet/Ekiga_Bot/config To name the bot to Ekiga_Bot, edit the file config and replace the names gozerbot with Ekiga_Bot On Tue, 14 Feb 2012 13:58:56 +0200 Genghis Khan wrote: > Dear fellow SIP users, > > This email was sent to Ekiga, Jitsi, Linphone, QuteCom, and SFLphone > in order to promote a shared aspiration which is decentralized VoIP. > > This is a part of a thread which I have originally started in the > Ekiga Users Mailing List (Support & Help). > > ______ > Issue: Using IRC Bot to display updates from RSS feeds in order to get > more audience, reputation, productivity and activity. > IRC Bot Software: GOZERBOT http://gozerbot.org/ (BSD License) > > > Since the fact that some of us are volunteers and not everyone of us > has enough resources, enough time, enough experience then it would > be best to all of us to have the most proper bot manager that can be. > > This subject is relevant to all of you I propose on registering a new > user at the Freenode IRC Network with the name "SIP-Bot" which the bot > will use and serve all the VoIP project channels. > > > The following instrucations are relevant to everyone, despite the fact > that it is specifically aimed at Ekiga. > > ______ > Topic: Setting up the bot to scan and post news titles of Web Feeds > > Commands to be executed at #ekiga (gnome) > > __________________ > Enable RSS Plugin: > Owner: !plug-enable rss > gozerbot: trying to reload: rss > gozerbot: enabled plugins: rss > > _________________ > Adding Web Feeds: > > !rss-add News http://www.ekiga.org/rss.xml > !rss-add Ekiga_Documentation_Project > http://wiki.ekiga.org/index.php?title=Special:RecentChanges&feed=atom !rss-add > EDL > http://www.mail-archive.com/ekiga-devel-list at gnome.org/maillist.xml !rss-add > EUL > http://www.mail-archive.com/ekiga-list at gnome.org/maillist.xml !rss-add > Damien_Sandras http://blog.ekiga.net/?feed=rss2 !rss-add GIT > http://git.gnome.org/browse/ekiga/atom/?h=master !rss-add OpalVoip > http://www.opalvoip.org/index.php?format=feed&type=rss !rss-add GS > http://gstreamer.freedesktop.org/news/rss-1.0.xml > > !rss-add News https://www.linphone.org/feed.rss.html > !rss-add LU > http://www.mail-archive.com/linphone-users at nongnu.org/maillist.xml > > !rss-add News http://identi.ca/sflphone/rss > !rss-add Activity > https://projects.savoirfairelinux.com/projects/sflphone/activity.atom !rss-add > SFLP > http://www.mail-archive.com/sflphone at lists.savoirfairelinux.net/maillist.xml > > !rss-add qutecom-dev > http://www.mail-archive.com/qutecom-dev at lists.qutecom.org/maillist.xml > @QuteCom Please add a StatusNet profile at http://identi.ca/ if you > don't have your own ATOM/RSS feed. > > !rss-add News http://identi.ca/jitsi/rss > @Jitsi Not Found > http://www.mail-archive.com/*****@jitsi.java.net/maillist.xml > > > * Feeds that are relevant to all of us: > !rss-add GNU_Telephony http://planet.gnu.org/gnutelephony/?feed=rss2 > !rss-add SOS https://github.com/skypeopensource.atom > > * EDL, EUL, GS, LU, SFLP and SOS were shortened because > each of them already has its title in each feed entry. > > * Concerning to "?" Activity, "?" News and "?" GIT > Each feed has its own place in its own related channel! > > > ______________________ > Starting up the Feeds: > > !rss-watch News > !rss-start News > > !rss-watch GIT > !rss-start GIT > > !rss-watch GNU_Telephony > !rss-start GNU_Telephony > > etc... > > ________________ > Disable TinyURL: > Owner: !rss-markup git > gozerbot: {u'tinyurl': 1} > Owner: !rss-addmarkup git tinyurl 0 > gozerbot: tinyurl added to (git,#ekiga) markuplist > Owner: !rss-markup git > gozerbot: {u'tinyurl': 0} > > ___________________ > Change reload time: > Default reload period as it seems is 1800 seconds (30 minutes) > > Suggestion for period cycles: > Two (2) hours for the lists. > Four (4) for the activity at GIT. (or less. you diced) > Six (6) hours or Eighteen (18) hours or a few days for > the VoIP project news blogs). > > Owner: !rss-sleeptime git > gozerbot: sleeptime for git is 1800 seconds > Owner: !rss-setsleeptime git 7200 > gozerbot: sleeptime set > Owner: !rss-sleeptime git > gozerbot: sleeptime for git is 7200 seconds > > > THE BOT IS READY! > > These commands should be executed at #ekiga (gnome) > * Commands applied only to the channels in which they were executed > at. > > @ Seeing activity from the bot will urge newcomers to ask questions, > express interest in Ekiga and to actively participate instead of > going away and forget about Ekiga, and open VoIP. > @ Voices are matter, we also need voices in the Documentation > Projects. > > > Little note to Jitsi and SFLphone: Thank you for > bothering to open StatusNet account at http://identi.ca/ > (I've never used twitter) > From mikemol at gmail.com Tue Feb 14 20:32:48 2012 From: mikemol at gmail.com (Michael Mol) Date: Tue, 14 Feb 2012 15:32:48 -0500 Subject: [Ekiga-list] IRC channel activity In-Reply-To: <20120208130845.0ed36105@acer> References: <20120208130845.0ed36105@acer> Message-ID: On Wed, Feb 8, 2012 at 6:08 AM, Genghis Khan wrote: > The official Ekiga channel is located at the GNOME IRC Network > > Network: irc.gnome.org (also: irc.gimp.net) > Channel: #ekiga > > > Problem: > There are plenty of potential users who are naturally starting at > Freenode (because they are used that all of the free software projects > are located on the Freenode network) instead of visiting > http://ekiga.org/community and as long as they won't visit ekiga.org or > as long as there is no one active in the channel to report where most > of the users are (GNOME Network) those IRC users will leave us for good. > > Some of these users, so I believe, can contribute (support and even > code) and revive the #ekiga IRC channel at the GNOME Network. > > > Suggestion: > A topic title should be placed at the IRC channel of Ekiga at Freenode > (irc.freenode.org) which says: > Welcome to Ekiga. The official channel has moved to irc.gnome.org, > #ekiga. Please visit http://ekiga.org/community for more information. > > Currently, as it seems, there is one admin at the IRC channel of Ekiga > at Freenode (irc.freenode.org). > > Can anyone take care about this issue? Suggestion: A bot in #ekiga on FN and OFTC which relays traffic. Similar to an IRC/XMPP bridge bot, but between two IRC channels on two different networks. Ratelimit it and have it say something akin to 'Rate cap hit. Too many lines. please join #ekiga on $network'. -- :wq From genghiskhan at gmx.ca Wed Feb 15 08:56:37 2012 From: genghiskhan at gmx.ca (Genghis Khan) Date: Wed, 15 Feb 2012 10:56:37 +0200 Subject: [Ekiga-list] IRC channel activity In-Reply-To: References: <20120208130845.0ed36105@acer> Message-ID: <20120215105637.2d92649b@acer> On Tue, 14 Feb 2012 15:32:48 -0500 Michael Mol wrote: > Suggestion: A bot in #ekiga on FN and OFTC which relays traffic. > Similar to an IRC/XMPP bridge bot, but between two IRC channels on two > different networks. Ratelimit it and have it say something akin to > 'Rate cap hit. Too many lines. please join #ekiga on $network'. There is a relay plugin. I don't know how to use it. http://gozerbot.org/plugs/relay.html http://gozerbot.org/handbook/RELAY.html Owner: !plug-enable relay gozerbot: trying to reload: relay gozerbot: enabled plugins: relay From nelson.pramos at gmail.com Tue Feb 28 18:11:34 2012 From: nelson.pramos at gmail.com (Nelson Ramos) Date: Tue, 28 Feb 2012 15:11:34 -0300 Subject: [Ekiga-list] No neightbors listed Message-ID: Hello people. I'm testing Ekiga for the first time, just because I need to use the neighborhood function, but it just don't work. For the test I'm using my notebook (Debian 6) and a virtual machine (Windows 7) running on VirtualBox. I installed avahi on Linux and Bonjour on Windows, but no neighbors is listed. What is wrong? What mistake I did or what I forgot? I am Brazilian and my knowledge of English is not so good, so forgive me for any mistake. Thanks! -- Atenciosamente, Nelson P. Ramos http://fb.com/nelson.pramos http://www.twitter.com/npramos Linux User #448514 -------------- next part -------------- An HTML attachment was scrubbed... URL: From stuart at gathman.org Tue Feb 28 20:00:07 2012 From: stuart at gathman.org (Stuart D Gathman) Date: Tue, 28 Feb 2012 15:00:07 -0500 Subject: [Ekiga-list] No neightbors listed In-Reply-To: References: Message-ID: <4F4D3247.4010806@gathman.org> Long ago, Nostradamus foresaw that on 02/28/2012 01:11 PM, Nelson Ramos would write: > I'm testing Ekiga for the first time, just because I need to use > the neighborhood function, but it just don't work. > For the test I'm using my notebook (Debian 6) and a virtual > machine (Windows 7) running on VirtualBox. I installed avahi on Linux > and Bonjour on Windows, but no neighbors is listed. > What is wrong? What mistake I did or what I forgot? > > I am Brazilian and my knowledge of English is not so good, so > forgive me for any mistake. Virtual box puts VMs behind NAT by default. To see it as a neighbor, you need bridged mode. From nelson.pramos at gmail.com Tue Feb 28 21:29:23 2012 From: nelson.pramos at gmail.com (Nelson Ramos) Date: Tue, 28 Feb 2012 18:29:23 -0300 Subject: [Ekiga-list] No neightbors listed In-Reply-To: <4F4D3247.4010806@gathman.org> References: <4F4D3247.4010806@gathman.org> Message-ID: I know this, the virtual network is in bridge mode. Thanks for your help anyway. Some more sugestions? :-) Em 28/02/2012 17:20, "Stuart D Gathman" escreveu: > Long ago, Nostradamus foresaw that on 02/28/2012 01:11 PM, Nelson Ramos > would write: > >> I'm testing Ekiga for the first time, just because I need to use the >> neighborhood function, but it just don't work. >> For the test I'm using my notebook (Debian 6) and a virtual machine >> (Windows 7) running on VirtualBox. I installed avahi on Linux and Bonjour >> on Windows, but no neighbors is listed. >> What is wrong? What mistake I did or what I forgot? >> >> I am Brazilian and my knowledge of English is not so good, so >> forgive me for any mistake. >> > Virtual box puts VMs behind NAT by default. To see it as a neighbor, you > need bridged mode. > ______________________________**_________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/**listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From stuart at gathman.org Wed Feb 29 02:06:24 2012 From: stuart at gathman.org (Stuart Gathman) Date: Tue, 28 Feb 2012 21:06:24 -0500 Subject: [Ekiga-list] No neightbors listed In-Reply-To: References: <4F4D3247.4010806@gathman.org> Message-ID: <4F4D8820.4040207@gathman.org> Long ago, Nostradamus foresaw that on 02/28/2012 04:29 PM, Nelson Ramos would write: > > I know this, the virtual network is in bridge mode. > Thanks for your help anyway. > > Some more sugestions? :-) > Next, check that your firewall is allowing discovery. I think the relevant ports are: -A INPUT -m state --state NEW -m udp -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 5060:5099 -j ACCEPT In any case, it Works for Me? (albiet with coworkers on the LAN, not with VirtualBox). From nelson.pramos at gmail.com Wed Feb 29 04:59:22 2012 From: nelson.pramos at gmail.com (Nelson Ramos) Date: Wed, 29 Feb 2012 01:59:22 -0300 Subject: [Ekiga-list] No neightbors listed In-Reply-To: <4F4D8820.4040207@gathman.org> References: <4F4D3247.4010806@gathman.org> <4F4D8820.4040207@gathman.org> Message-ID: Ok, I'll check my firewall. I did another test today using my notebook and another real machine running windows 7 and got the same result. After check my firewall I'll tell you the result. Thanks again. Em 28/02/2012 23:06, "Stuart Gathman" escreveu: > Long ago, Nostradamus foresaw that on 02/28/2012 04:29 PM, Nelson Ramos > would write: > > > > I know this, the virtual network is in bridge mode. > > Thanks for your help anyway. > > > > Some more sugestions? :-) > > > Next, check that your firewall is allowing discovery. > I think the relevant ports are: > > -A INPUT -m state --state NEW -m udp -p udp --dport 5353 -d 224.0.0.251 > -j ACCEPT > -A INPUT -m state --state NEW -m udp -p udp --dport 5060:5099 -j ACCEPT > > In any case, it Works for Me? (albiet with coworkers on the LAN, not > with VirtualBox). > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Feb 29 12:39:21 2012 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 29 Feb 2012 13:39:21 +0100 Subject: [Ekiga-list] No neightbors listed In-Reply-To: References: Message-ID: <4F4E1C79.1050202@pu-pm.univ-fcomte.fr> On 28/02/12 19:11, Nelson Ramos wrote: > Hello people. > > I'm testing Ekiga for the first time, just because I need to use the > neighborhood function, but it just don't work. > For the test I'm using my notebook (Debian 6) and a virtual machine > (Windows 7) running on VirtualBox. I installed avahi on Linux and Bonjour > on Windows, but no neighbors is listed. > What is wrong? What mistake I did or what I forgot? Neighbours function is unfortunately not implemented for Windows version of ekiga, see http://wiki.ekiga.org/index.php/Installing_Ekiga_on_Windows. -- Eugen From nelson.pramos at gmail.com Wed Feb 29 14:28:06 2012 From: nelson.pramos at gmail.com (Nelson Ramos) Date: Wed, 29 Feb 2012 11:28:06 -0300 Subject: [Ekiga-list] No neightbors listed In-Reply-To: <4F4E1C79.1050202@pu-pm.univ-fcomte.fr> References: <4F4E1C79.1050202@pu-pm.univ-fcomte.fr> Message-ID: This explain everithing... Thank you very much! Em 29/02/2012 09:39, "Eugen Dedu" escreveu: > > On 28/02/12 19:11, Nelson Ramos wrote: >> >> Hello people. >> >> I'm testing Ekiga for the first time, just because I need to use the >> neighborhood function, but it just don't work. >> For the test I'm using my notebook (Debian 6) and a virtual machine >> (Windows 7) running on VirtualBox. I installed avahi on Linux and Bonjour >> on Windows, but no neighbors is listed. >> What is wrong? What mistake I did or what I forgot? > > > Neighbours function is unfortunately not implemented for Windows version of ekiga, see http://wiki.ekiga.org/index.php/Installing_Ekiga_on_Windows. > > -- > Eugen > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: