From jbeard4 at cs.mcgill.ca Wed Jul 1 02:31:51 2009 From: jbeard4 at cs.mcgill.ca (Jacob Beard) Date: Tue, 30 Jun 2009 22:31:51 -0400 Subject: [Ekiga-list] SOCKS proxy Message-ID: <8e648abd0906301931q3de3624bn9ba57dcf3f68425e@mail.gmail.com> Does Ekiga currently support routing calls through a SOCKS proxy? I'm asking because I'm currently using Ekiga 2.0.12 on Ubuntu 8.04, so I'm not sure if this might be a feature that has been added to later Ekiga versions. Right now, I'm behind a very restrictive network, and all of my traffic needs to go through a SOCKS proxy, set up as an ssh tunnel. Skype supports this feature, and it works quite well. If Ekiga 3.2 supports this feature, I would definitely consider upgrading to Jaunty in order to get it, because right now, it's essential to my VoIP needs. Please let me know. Thanks, Jake From dsandras at seconix.com Wed Jul 1 07:35:05 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 01 Jul 2009 09:35:05 +0200 Subject: [Ekiga-list] SOCKS proxy In-Reply-To: <8e648abd0906301931q3de3624bn9ba57dcf3f68425e@mail.gmail.com> References: <8e648abd0906301931q3de3624bn9ba57dcf3f68425e@mail.gmail.com> Message-ID: <1246433705.3954.11.camel@scorpion.multitel.be> Le mardi 30 juin 2009 ? 22:31 -0400, Jacob Beard a ?crit : > Does Ekiga currently support routing calls through a SOCKS proxy? I'm > asking because I'm currently using Ekiga 2.0.12 on Ubuntu 8.04, so I'm > not sure if this might be a feature that has been added to later Ekiga > versions. Right now, I'm behind a very restrictive network, and all of > my traffic needs to go through a SOCKS proxy, set up as an ssh tunnel. > Skype supports this feature, and it works quite well. If Ekiga 3.2 > supports this feature, I would definitely consider upgrading to Jaunty > in order to get it, because right now, it's essential to my VoIP > needs. > > Please let me know. Thanks, > It's not possible to do that with SIP. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From chinku.linux at gmail.com Thu Jul 2 05:27:10 2009 From: chinku.linux at gmail.com (chaitanya mehandru) Date: Thu, 2 Jul 2009 10:57:10 +0530 Subject: [Ekiga-list] Want to submit a paper on Ekiga Message-ID: <24b40b2b0907012227s1f90a58dj969f6aef190a23dc@mail.gmail.com> Hi, I have written a paper on Ekiga performance analysis on Mobile Internet Devices. Can someone please point me to certain conferences or symposia where i can submit this paper? Thanks, Chaitanya -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Jul 2 09:30:40 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 02 Jul 2009 11:30:40 +0200 Subject: [Ekiga-list] [Regression] Building snapshots of ekiga for Debian. In-Reply-To: <4A242366.7020901@pu-pm.univ-fcomte.fr> References: <4A2419F7.9080309@pu-pm.univ-fcomte.fr> <4A241D9B.9090105@pu-pm.univ-fcomte.fr> <4A242366.7020901@pu-pm.univ-fcomte.fr> Message-ID: <4A4C7E40.4070102@pu-pm.univ-fcomte.fr> Eugen Dedu wrote: > Mateusz Kaduk wrote: >> Unfortunately libavcodec52 and libx264 are not in non-free. >> Another and only solution that comes to my mind that would be nice is >> remaking script building snapshots to manually build stable releases. >> I tried snapshot despite its missing H264, calling just don't work, so >> I had >> to downgrade to Debian's version. > > It's what I have done until a little ago. It's on my todo list :o) I have finally created the package for non-free plugins which goes in pair with debian official 3.6.1. You install it as before: aptitude install libopal3.6.1-plugins-non-free, see http://wiki.ekiga.org/index.php/Snapshots for more information. >> 2009/6/1 Eugen Dedu >> >>> Finally is there a chance to see non-free H264 in Debian non-free >>> section >>>> ? >>>> >>> I must think about that. Does non-free have the necessary codecs, like >>> those from debian-multimedia? -- Eugen From ashleystrutt at btinternet.com Sun Jul 5 09:54:36 2009 From: ashleystrutt at btinternet.com (Ashley Strutt) Date: Sun, 5 Jul 2009 09:54:36 +0000 (GMT) Subject: [Ekiga-list] follow on from earlier problem(not able to hear echo test), outpu.txt file In-Reply-To: <4A3F60D7.8020805@pu-pm.univ-fcomte.fr> References: <292880.78717.qm@web86006.mail.ird.yahoo.com> <4A3F308F.8070102@pu-pm.univ-fcomte.fr> <53178.40528.qm@web86007.mail.ird.yahoo.com> <4A3F60D7.8020805@pu-pm.univ-fcomte.fr> Message-ID: <15465.53642.qm@web86011.mail.ird.yahoo.com> A couple of weeks ao I tried sorting this problem out but have now figured out how to get the feed back. (attached). Thanks Ashley ________________________________ From: Eugen Dedu To: Ekiga mailing list Sent: Monday, 22 June, 2009 11:45:43 AM Subject: Re: [Ekiga-list] mailing list archive Ashley Strutt wrote: > Hi, > > The current problem is not being able to hear the echo test but I can hear ringing when I try the call out to my cell phone. You should send us the (compressed) output.txt file after: ekiga -d 4 2>output.txt > There are also issues with the network via the router but I think I got this fixed as I can log in with ekiga.net and diamondcard. I carried out the instructions in the wiki but still getting the report that there is a problem but can now log in to ekiga which I could not before. > > Ashley > > > > > ________________________________ > From: Eugen Dedu > To: Ekiga mailing list > Sent: Monday, 22 June, 2009 8:19:43 AM > Subject: Re: [Ekiga-list] mailing list archive > > Ashley Strutt wrote: >> Hi, >> >> Please can some one tell me if there is an archive for the mailing list. > > Look at the end of this e-mail... > >> I'm resetting up Ekiga and have problems with sound and a couple of other problems and know that the questions have been asked before but not by me. > > What is the problem? _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: output.txt.tar.gz Type: application/gzip Size: 7850 bytes Desc: not available URL: From malik_jemes at hotmail.com Sun Jul 5 12:00:43 2009 From: malik_jemes at hotmail.com (malik_jemes at hotmail.com) Date: Sun, 5 Jul 2009 05:00:43 -0700 Subject: [Ekiga-list] Vacation reply In-Reply-To: Message-ID: An HTML attachment was scrubbed... URL: From malik_jemes at hotmail.com Mon Jul 6 12:00:41 2009 From: malik_jemes at hotmail.com (malik_jemes at hotmail.com) Date: Mon, 6 Jul 2009 05:00:41 -0700 Subject: [Ekiga-list] Vacation reply In-Reply-To: Message-ID: An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Jul 6 19:54:43 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 06 Jul 2009 21:54:43 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available Message-ID: <4A525683.1010807@pu-pm.univ-fcomte.fr> This is the five stable release of the 3.2 version of Ekiga. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2/ Required librairies can be found at: ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/ ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ * What's changed ? ================== * Important points: - fixes an important bug (introduced in the previous version) of having only 1-2 video images/sec - most of the known crashes have been fixed - next release goals: crash fixing and register/call error fixing * Changes in ekiga 3.2.5 (2009-07-06) - Fixed very low rate of sent images during video conversations - Fixed crash in LDAP - Fixed crash in presence - Fixed simultaneous reads from different threads in jitter code - Fixed crash during idle times - Fixed crash when accepting a call - Fixed deadlock in SIP handler - Fixed freeze upon calling and showing of pc:udp$... in the URI bar - Fixed crash in G726-16 audio codec - Allows multiple registrations with the same registrar using different user names - Allows user to choose system iLBC - Fixed window resizing in chat when entering very long words - Fixed linking of sbc plugin with libsamplerate - Fixed compilation with gtk 2.12 - Fixed compilation with gcc 4.4 - Windows and Solaris specific fixes - Added a small script, ekiga-debug-analyser, not installed, which retrieves only the packets exchanged from a Ekiga debug output - Other minor fixes - Updated translations: bn_IN, el, or - Updated help translations: el Special thanks to Robert Jonglobed, from ptlib/opal team, for various crash fixes. On behalf of Ekiga/ptlib/opal teams, Eugen Dedu From mateusz.kaduk at gmail.com Mon Jul 6 20:02:20 2009 From: mateusz.kaduk at gmail.com (Mateusz Kaduk) Date: Mon, 6 Jul 2009 22:02:20 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A525683.1010807@pu-pm.univ-fcomte.fr> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: I am looking forward to see it in Debian sid 2009/7/6 Eugen Dedu : > This is the five stable release of the 3.2 version of Ekiga. From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Jul 6 20:03:22 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 06 Jul 2009 22:03:22 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: <4A52588A.8050103@pu-pm.univ-fcomte.fr> It will be as soon as possible... Mateusz Kaduk wrote: > I am looking forward to see it in Debian sid > > 2009/7/6 Eugen Dedu : >> This is the five stable release of the 3.2 version of Ekiga. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From johan_brn at yahoo.com Mon Jul 6 20:52:07 2009 From: johan_brn at yahoo.com (Johan Brannlund) Date: Mon, 6 Jul 2009 20:52:07 +0000 (UTC) Subject: [Ekiga-list] SOCKS proxy References: <8e648abd0906301931q3de3624bn9ba57dcf3f68425e@mail.gmail.com> Message-ID: On Tue, 30 Jun 2009 22:31:51 -0400, Jacob Beard wrote: > Does Ekiga currently support routing calls through a SOCKS proxy? No, as Damien pointed out. But you can set up a tun VPN using ssh and then route your calls through that instead. See for instance https://help.ubuntu.com/community/SSH_VPN (although I'd recommend openvpn or something like that instead, if your network permits that). - Johan From otakuj462 at gmail.com Mon Jul 6 23:51:50 2009 From: otakuj462 at gmail.com (Jake B) Date: Mon, 6 Jul 2009 19:51:50 -0400 Subject: [Ekiga-list] SOCKS proxy In-Reply-To: References: <8e648abd0906301931q3de3624bn9ba57dcf3f68425e@mail.gmail.com> Message-ID: <8e648abd0907061651h15547357j6865c393ae2e9663@mail.gmail.com> Thank you, Johan and Damien. This is very useful information. Jake On Mon, Jul 6, 2009 at 4:52 PM, Johan Brannlund wrote: > On Tue, 30 Jun 2009 22:31:51 -0400, Jacob Beard wrote: > >> Does Ekiga currently support routing calls through a SOCKS proxy? > > No, as Damien pointed out. > > But you can set up a tun VPN using ssh and then route your calls > through that instead. > > See for instance > > https://help.ubuntu.com/community/SSH_VPN > > (although I'd recommend openvpn or something like that instead, if your > network permits that). > > - Johan > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From bret at busby.net Tue Jul 7 06:42:07 2009 From: bret at busby.net (Bret Busby) Date: Tue, 7 Jul 2009 14:42:07 +0800 (WST) Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: On Mon, 6 Jul 2009, Mateusz Kaduk wrote: > Date: Mon, 6 Jul 2009 22:02:20 +0200 > From: Mateusz Kaduk > Reply-To: Ekiga mailing list > To: Ekiga mailing list > Subject: Re: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available > > I am looking forward to see it in Debian sid > > 2009/7/6 Eugen Dedu : >> This is the five stable release of the 3.2 version of Ekiga. > And I, in Debian 4.0 and 5.0, and Ubuntu 8.04 ... -- Bret Busby Armadale West Australia .............. "So once you do know what the question actually is, you'll know what the answer means." - Deep Thought, Chapter 28 of Book 1 of "The Hitchhiker's Guide to the Galaxy: A Trilogy In Four Parts", written by Douglas Adams, published by Pan Books, 1992 .................................................... From volkerbradley at gmail.com Tue Jul 7 09:53:53 2009 From: volkerbradley at gmail.com (Volker Bradley) Date: Tue, 7 Jul 2009 05:53:53 -0400 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: Installed it easily in Kubuntu Jaunty: wget ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2/ekiga-3.2.5.tar.bz2 wget ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/opal-3.6.4.tar.bz2 wget ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ptlib-2.6.4.tar.bz2 sudo dpkg -r libopal3.6.1-dev libopal3.6.1 sudo dpkg -r libpt2.6.1-dev libpt2.6.1 libpt2.6.1-plugins-v4l2 libpt2.6.1-plugins-alsa sudo dpkg -r ekiga tar jxvf ptlib-2.6.4.tar.bz2 cd ptlib-2.6.4 .configure make sudo checkinstall cd .. tar jxvf opal-3.6.4.tar.bz2 cd opal-3.6.4 ./configure make sudo checkinstall cd .. sudo apt-get install intltool libgtk2.0-dev libgconf2-dev libsigc++-2.0-dev libgconf2-dev libebook1.2-dev libldap2-dev libsasl2-dev libxv-dev libdbus-glib-1-dev -y tar jxvf ekiga-3.2.5.tar.bz2 cd ekiga-3.2.5 ./configure make sudo checkinstall sudo cp /usr/local/lib/libpt.so.2.6.4 /usr/lib sudo cp /usr/local/lib/libopal.so.3.6.4 /usr/lib Installed in minutes. Volker On Tue, Jul 7, 2009 at 2:42 AM, Bret Busby wrote: > On Mon, 6 Jul 2009, Mateusz Kaduk wrote: > > Date: Mon, 6 Jul 2009 22:02:20 +0200 >> From: Mateusz Kaduk >> Reply-To: Ekiga mailing list >> To: Ekiga mailing list >> Subject: Re: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available >> >> I am looking forward to see it in Debian sid >> >> 2009/7/6 Eugen Dedu : >> >>> This is the five stable release of the 3.2 version of Ekiga. >>> >> >> > And I, in Debian 4.0 and 5.0, and Ubuntu 8.04 ... > > -- > Bret Busby > Armadale > West Australia > .............. > > "So once you do know what the question actually is, > you'll know what the answer means." > - Deep Thought, > Chapter 28 of Book 1 of > "The Hitchhiker's Guide to the Galaxy: > A Trilogy In Four Parts", > written by Douglas Adams, > published by Pan Books, 1992 > > .................................................... > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From volkerbradley at gmail.com Tue Jul 7 09:53:53 2009 From: volkerbradley at gmail.com (Volker Bradley) Date: Tue, 7 Jul 2009 05:53:53 -0400 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: Installed it easily in Kubuntu Jaunty: wget ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2/ekiga-3.2.5.tar.bz2 wget ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/opal-3.6.4.tar.bz2 wget ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ptlib-2.6.4.tar.bz2 sudo dpkg -r libopal3.6.1-dev libopal3.6.1 sudo dpkg -r libpt2.6.1-dev libpt2.6.1 libpt2.6.1-plugins-v4l2 libpt2.6.1-plugins-alsa sudo dpkg -r ekiga tar jxvf ptlib-2.6.4.tar.bz2 cd ptlib-2.6.4 .configure make sudo checkinstall cd .. tar jxvf opal-3.6.4.tar.bz2 cd opal-3.6.4 ./configure make sudo checkinstall cd .. sudo apt-get install intltool libgtk2.0-dev libgconf2-dev libsigc++-2.0-dev libgconf2-dev libebook1.2-dev libldap2-dev libsasl2-dev libxv-dev libdbus-glib-1-dev -y tar jxvf ekiga-3.2.5.tar.bz2 cd ekiga-3.2.5 ./configure make sudo checkinstall sudo cp /usr/local/lib/libpt.so.2.6.4 /usr/lib sudo cp /usr/local/lib/libopal.so.3.6.4 /usr/lib Installed in minutes. Volker On Tue, Jul 7, 2009 at 2:42 AM, Bret Busby wrote: > On Mon, 6 Jul 2009, Mateusz Kaduk wrote: > > Date: Mon, 6 Jul 2009 22:02:20 +0200 >> From: Mateusz Kaduk >> Reply-To: Ekiga mailing list >> To: Ekiga mailing list >> Subject: Re: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available >> >> I am looking forward to see it in Debian sid >> >> 2009/7/6 Eugen Dedu : >> >>> This is the five stable release of the 3.2 version of Ekiga. >>> >> >> > And I, in Debian 4.0 and 5.0, and Ubuntu 8.04 ... > > -- > Bret Busby > Armadale > West Australia > .............. > > "So once you do know what the question actually is, > you'll know what the answer means." > - Deep Thought, > Chapter 28 of Book 1 of > "The Hitchhiker's Guide to the Galaxy: > A Trilogy In Four Parts", > written by Douglas Adams, > published by Pan Books, 1992 > > .................................................... > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 7 11:46:32 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 07 Jul 2009 13:46:32 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: <4A533598.8040900@pu-pm.univ-fcomte.fr> Volker Bradley wrote: > Installed it easily in Kubuntu Jaunty: > wget ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2/ekiga-3.2.5.tar.bz2 > wget ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/opal-3.6.4.tar.bz2 > wget ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ptlib-2.6.4.tar.bz2 > sudo dpkg -r libopal3.6.1-dev libopal3.6.1 > sudo dpkg -r libpt2.6.1-dev libpt2.6.1 libpt2.6.1-plugins-v4l2 > libpt2.6.1-plugins-alsa > sudo dpkg -r ekiga > tar jxvf ptlib-2.6.4.tar.bz2 > cd ptlib-2.6.4 > .configure > make > sudo checkinstall > cd .. > tar jxvf opal-3.6.4.tar.bz2 > cd opal-3.6.4 > ./configure > make > sudo checkinstall > cd .. > sudo apt-get install intltool libgtk2.0-dev libgconf2-dev libsigc++-2.0-dev > libgconf2-dev libebook1.2-dev libldap2-dev libsasl2-dev libxv-dev > libdbus-glib-1-dev -y > tar jxvf ekiga-3.2.5.tar.bz2 > cd ekiga-3.2.5 > ./configure > make > sudo checkinstall > sudo cp /usr/local/lib/libpt.so.2.6.4 /usr/lib > sudo cp /usr/local/lib/libopal.so.3.6.4 /usr/lib > Installed in minutes. Very good news! > Volker > > > > On Tue, Jul 7, 2009 at 2:42 AM, Bret Busby wrote: > >> On Mon, 6 Jul 2009, Mateusz Kaduk wrote: >> >> Date: Mon, 6 Jul 2009 22:02:20 +0200 >>> From: Mateusz Kaduk >>> Reply-To: Ekiga mailing list >>> To: Ekiga mailing list >>> Subject: Re: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available >>> >>> I am looking forward to see it in Debian sid >>> >>> 2009/7/6 Eugen Dedu : >>> >>>> This is the five stable release of the 3.2 version of Ekiga. >>>> >>> >> And I, in Debian 4.0 and 5.0, and Ubuntu 8.04 ... >> >> -- >> Bret Busby >> Armadale >> West Australia >> .............. >> >> "So once you do know what the question actually is, >> you'll know what the answer means." >> - Deep Thought, >> Chapter 28 of Book 1 of >> "The Hitchhiker's Guide to the Galaxy: >> A Trilogy In Four Parts", >> written by Douglas Adams, >> published by Pan Books, 1992 >> >> .................................................... >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > > > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From Jim.Diamond at acadiau.ca Tue Jul 7 19:18:20 2009 From: Jim.Diamond at acadiau.ca (Jim Diamond) Date: Tue, 7 Jul 2009 16:18:20 -0300 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: <20090707191820.GB27140@jdiamond-nb> On Tue, Jul 7, 2009 at 05:53 (-0400), Volker Bradley wrote: > Installed it easily in Kubuntu Jaunty: > wget ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2/ekiga-3.2.5.tar.bz2 > wget ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/opal-3.6.4.tar.bz2 > wget ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ptlib-2.6.4.tar.bz2 > sudo dpkg -r libopal3.6.1-dev libopal3.6.1 > sudo dpkg -r libpt2.6.1-dev libpt2.6.1 libpt2.6.1-plugins-v4l2 > libpt2.6.1-plugins-alsa > sudo dpkg -r ekiga > tar jxvf ptlib-2.6.4.tar.bz2 > cd ptlib-2.6.4 > .configure > make > sudo checkinstall > cd .. > tar jxvf opal-3.6.4.tar.bz2 > cd opal-3.6.4 > ./configure > make > sudo checkinstall > cd .. > sudo apt-get install intltool libgtk2.0-dev libgconf2-dev libsigc++-2.0-dev > libgconf2-dev libebook1.2-dev libldap2-dev libsasl2-dev libxv-dev > libdbus-glib-1-dev -y > tar jxvf ekiga-3.2.5.tar.bz2 > cd ekiga-3.2.5 > ./configure > make > sudo checkinstall > sudo cp /usr/local/lib/libpt.so.2.6.4 /usr/lib > sudo cp /usr/local/lib/libopal.so.3.6.4 /usr/lib > Installed in minutes. Volker, thanks for the instructions. Volker et al... I tried compiling this on Knoppix 6.0.1 In the end I could not convince Knoppix, apt-get and ekiga's configure script to see eye-to-eye regarding dbus, and had to configure it with --disable-dbus After that it compiled smoothly enough; the entire configure line was ./configure --prefix=/usr --libdir=/usr/lib --sysconfdir=/etc --localstatedir=/var --mandir=/usr/man --disable-dbus --disable-gnome --disable-gconf --disable-avahi --disable-gdu --disable-eds --disable-xcap --disable-kde --disable-kab --disable-gstreamer --disable-static --build=i486-slackware-linux Problem 1 --------- Unfortunately, it is unable to see any audio or video devices this way. Does it use dbus to figure out the a/v devices, or do the assembled masses think my problem is unrelated to that? I also compiled it on Slackware 12.2 (an infinitely simpler process than for Knoppix, as it turns out, using slight mods of the SlackBuild scripts on www.slackbuild.org). Problem 2 --------- On Slackware ekiga refuses to see my ov511 web cam, although it is happy with my Logitech web cam (a pwc-based web cam). Has ekiga given up on older web cams? This web cam works happily with other video applications on that system. Problem 3 --------- Ignoring problems 1 and 2, with the Logitech web cam on the Slackware system, I connected from the Slackware system to the Knoppix system with h323:192.168.1.10 Although the call goes through, the video does not show up on the Knoppix system. Instead, the gui on the Slackware system goes berserk, quickly switching between the small moving logo and the larger (320x240) image from my web cam. Since they are different sizes, the window keeps changing size. If I connect with sip:user at 192.168.1.10 the Knoppix end sees a small version of my video, rather than the 320x240. In both cases it is using Speex and H261. The Slackware version was compiled with other codecs, the Knoppix version only has that video codec. If I connect from Knoppix to Slackware, with sip it works the same as above. With h323, there is no flashing as above, but the (small version) of the video is shown at both ends. Can anyone suggest any solutions to these problems? Thanks. Jim From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 7 19:31:10 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 07 Jul 2009 21:31:10 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <20090707191820.GB27140@jdiamond-nb> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> Message-ID: <4A53A27E.4010402@pu-pm.univ-fcomte.fr> Jim Diamond wrote: > On Tue, Jul 7, 2009 at 05:53 (-0400), Volker Bradley wrote: > >> Installed it easily in Kubuntu Jaunty: >> wget ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.2/ekiga-3.2.5.tar.bz2 >> wget ftp://ftp.gnome.org/pub/gnome/sources/opal/3.6/opal-3.6.4.tar.bz2 >> wget ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.6/ptlib-2.6.4.tar.bz2 >> sudo dpkg -r libopal3.6.1-dev libopal3.6.1 >> sudo dpkg -r libpt2.6.1-dev libpt2.6.1 libpt2.6.1-plugins-v4l2 >> libpt2.6.1-plugins-alsa >> sudo dpkg -r ekiga >> tar jxvf ptlib-2.6.4.tar.bz2 >> cd ptlib-2.6.4 >> .configure >> make >> sudo checkinstall >> cd .. >> tar jxvf opal-3.6.4.tar.bz2 >> cd opal-3.6.4 >> ./configure >> make >> sudo checkinstall >> cd .. >> sudo apt-get install intltool libgtk2.0-dev libgconf2-dev libsigc++-2.0-dev >> libgconf2-dev libebook1.2-dev libldap2-dev libsasl2-dev libxv-dev >> libdbus-glib-1-dev -y >> tar jxvf ekiga-3.2.5.tar.bz2 >> cd ekiga-3.2.5 >> ./configure >> make >> sudo checkinstall >> sudo cp /usr/local/lib/libpt.so.2.6.4 /usr/lib >> sudo cp /usr/local/lib/libopal.so.3.6.4 /usr/lib >> Installed in minutes. > > Volker, > > thanks for the instructions. > > > Volker et al... > > > I tried compiling this on Knoppix 6.0.1 > > In the end I could not convince Knoppix, apt-get and ekiga's configure > script to see eye-to-eye regarding dbus, and had to configure it with > --disable-dbus The main error is here. What is the error with dbus enabled? > After that it compiled smoothly enough; the entire configure line was > ./configure --prefix=/usr --libdir=/usr/lib --sysconfdir=/etc --localstatedir=/var --mandir=/usr/man --disable-dbus --disable-gnome --disable-gconf --disable-avahi --disable-gdu --disable-eds --disable-xcap --disable-kde --disable-kab --disable-gstreamer --disable-static --build=i486-slackware-linux > > > > Problem 1 > --------- > Unfortunately, it is unable to see any audio or video devices this > way. Does it use dbus to figure out the a/v devices, or do the > assembled masses think my problem is unrelated to that? I think dbus is mandatory for device discovery. Could someone confirm? > I also compiled it on Slackware 12.2 (an infinitely simpler process > than for Knoppix, as it turns out, using slight mods of the SlackBuild > scripts on www.slackbuild.org). > > Problem 2 > --------- > On Slackware ekiga refuses to see my ov511 web cam, although it is > happy with my Logitech web cam (a pwc-based web cam). Has ekiga given > up on older web cams? This web cam works happily with other video > applications on that system. Have you libv4l library installed? If yes, please send the -d 4 output... > Problem 3 > --------- > Ignoring problems 1 and 2, with the Logitech web cam on the Slackware > system, I connected from the Slackware system to the Knoppix system with > h323:192.168.1.10 > Although the call goes through, the video does not show up on the > Knoppix system. Instead, the gui on the Slackware system goes > berserk, quickly switching between the small moving logo and the > larger (320x240) image from my web cam. Since they are different > sizes, the window keeps changing size. > > If I connect with sip:user at 192.168.1.10 the Knoppix end sees a small > version of my video, rather than the 320x240. > > In both cases it is using Speex and H261. The Slackware version was > compiled with other codecs, the Knoppix version only has that video codec. > > > If I connect from Knoppix to Slackware, with sip it works the same as above. > With h323, there is no flashing as above, but the (small version) of > the video is shown at both ends. > > > Can anyone suggest any solutions to these problems? > > > Thanks. > Jim > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Eugen From Jim.Diamond at acadiau.ca Tue Jul 7 21:12:15 2009 From: Jim.Diamond at acadiau.ca (Jim Diamond) Date: Tue, 7 Jul 2009 18:12:15 -0300 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A53A27E.4010402@pu-pm.univ-fcomte.fr> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> Message-ID: <20090707211215.GA27931@jdiamond-nb> On Tue, Jul 7, 2009 at 21:31 (+0200), Eugen Dedu wrote: Thanks for the quick response. > Jim Diamond wrote: >> I tried compiling this on Knoppix 6.0.1 >> In the end I could not convince Knoppix, apt-get and ekiga's configure >> script to see eye-to-eye regarding dbus, and had to configure it with >> --disable-dbus > The main error is here. What is the error with dbus enabled? Here is the end of the output from configure: ------------------ checking for XV... yes checking for DBUS... configure: error: Package requirements (dbus-1 >= 0.36 dbus-glib-1 >= 0.36) were not met: No package 'dbus-1' found No package 'dbus-glib-1' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables DBUS_CFLAGS and DBUS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. ------------------ OK, I'll just try installing dubs-1: ------------------ sudo apt-get install dbus-1 Reading package lists... Done Building dependency tree Reading state information... Done Package dbus-1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: dbus E: Package dbus-1 has no installation candidate ------------------ It may well just be that I am not debian-compliant, but I don't know what to install, and a (quick) web search did not help me on this one. If someone can tell me how to make configure happy, I'd be even happier. Or tell me which packages to install... I tried fooling configure by saying env DBUS_LIB=" " DBUS_CFLAGS=" " ./configure ... but some compile or link eventually crashed and burned. >> Problem 1 >> --------- >> Unfortunately, it is unable to see any audio or video devices this >> way. Does it use dbus to figure out the a/v devices, or do the >> assembled masses think my problem is unrelated to that? > I think dbus is mandatory for device discovery. Could someone confirm? >> I also compiled it on Slackware 12.2 (an infinitely simpler process >> than for Knoppix, as it turns out, using slight mods of the SlackBuild >> scripts on www.slackbuild.org). >> Problem 2 >> --------- >> On Slackware ekiga refuses to see my ov511 web cam, although it is >> happy with my Logitech web cam (a pwc-based web cam). Has ekiga given >> up on older web cams? This web cam works happily with other video >> applications on that system. > Have you libv4l library installed? If yes, please send the -d 4 output... I have libv4l-0.5.7 compiled and installed with the Slackware 12.2 slackbuild. The output is a bit large to include here. You can get it from http://cs.acadiau.ca/~jdiamond/ekiga-d4.out As I recall, older versions of ekiga (or maybe gnomemeeting) got you to select V4L or V4L2. I don't see that choice any more. The camera that works required, as I recall, V4L2 whereas this one required V4L. So maybe the code to deal with V4L vs. V4L2 has an issue. Thanks. Jim From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 7 21:18:56 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 07 Jul 2009 23:18:56 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <20090707211215.GA27931@jdiamond-nb> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> <20090707211215.GA27931@jdiamond-nb> Message-ID: <4A53BBC0.3000604@pu-pm.univ-fcomte.fr> Jim Diamond wrote: > On Tue, Jul 7, 2009 at 21:31 (+0200), Eugen Dedu wrote: > > Thanks for the quick response. > >> Jim Diamond wrote: > >>> I tried compiling this on Knoppix 6.0.1 > >>> In the end I could not convince Knoppix, apt-get and ekiga's configure >>> script to see eye-to-eye regarding dbus, and had to configure it with >>> --disable-dbus > >> The main error is here. What is the error with dbus enabled? > > Here is the end of the output from configure: > > ------------------ > checking for XV... yes > checking for DBUS... configure: error: Package requirements (dbus-1 >= 0.36 dbus-glib-1 >= 0.36) were not met: > > No package 'dbus-1' found > No package 'dbus-glib-1' found > > Consider adjusting the PKG_CONFIG_PATH environment variable if you > installed software in a non-standard prefix. > > Alternatively, you may set the environment variables DBUS_CFLAGS > and DBUS_LIBS to avoid the need to call pkg-config. > See the pkg-config man page for more details. > ------------------ > > OK, I'll just try installing dubs-1: > > ------------------ > sudo apt-get install dbus-1 > Reading package lists... Done > Building dependency tree > Reading state information... Done > Package dbus-1 is not available, but is referred to by another package. > This may mean that the package is missing, has been obsoleted, or > is only available from another source > However the following packages replace it: > dbus > E: Package dbus-1 has no installation candidate > ------------------ According to http://slackfind.net/en/packages/search/?name=dbus, on slackware the package is named simply dbus. I'll check why ekiga configure shows dbus-1, not dbus... > It may well just be that I am not debian-compliant, but I don't know > what to install, and a (quick) web search did not help me on this one. > > > If someone can tell me how to make configure happy, I'd be even > happier. Or tell me which packages to install... > > > I tried fooling configure by saying > env DBUS_LIB=" " DBUS_CFLAGS=" " ./configure ... > but some compile or link eventually crashed and burned. > > > >>> Problem 1 >>> --------- >>> Unfortunately, it is unable to see any audio or video devices this >>> way. Does it use dbus to figure out the a/v devices, or do the >>> assembled masses think my problem is unrelated to that? > >> I think dbus is mandatory for device discovery. Could someone confirm? > >>> I also compiled it on Slackware 12.2 (an infinitely simpler process >>> than for Knoppix, as it turns out, using slight mods of the SlackBuild >>> scripts on www.slackbuild.org). > >>> Problem 2 >>> --------- >>> On Slackware ekiga refuses to see my ov511 web cam, although it is >>> happy with my Logitech web cam (a pwc-based web cam). Has ekiga given >>> up on older web cams? This web cam works happily with other video >>> applications on that system. > >> Have you libv4l library installed? If yes, please send the -d 4 output... > I have libv4l-0.5.7 compiled and installed with the Slackware 12.2 slackbuild. > > The output is a bit large to include here. You can get it from > http://cs.acadiau.ca/~jdiamond/ekiga-d4.out > > As I recall, older versions of ekiga (or maybe gnomemeeting) got you > to select V4L or V4L2. I don't see that choice any more. The camera > that works required, as I recall, V4L2 whereas this one required V4L. > So maybe the code to deal with V4L vs. V4L2 has an issue. > > > Thanks. > Jim > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From Joseph.Comfort at asu.edu Tue Jul 7 21:22:20 2009 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Tue, 07 Jul 2009 14:22:20 -0700 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: <4A53BC8C.8090404@asu.edu> ptlib and opal compile fine on SuSE 11.1 with gcc 4.3.3. Ekiga is going very well (after disabling ldap) until: Making all in help make[2]: Entering directory `/usr/local/ekiga-3.2.5/help' xsltproc -o ekiga-C.omf --stringparam db2omf.basename ekiga --stringparam db2omf.format 'docbook' --stringparam db2omf.dtd "-//OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang C --stringparam db2omf.omf_dir "/usr/local/share/omf" --stringparam db2omf.help_dir "/usr/local/share/gnome/help" --stringparam db2omf.omf_in "/usr/local/ekiga-3.2.5/help/ekiga.omf.in" `/usr/bin/pkg-config --variable db2omf gnome-doc-utils` C/ekiga.xml || { rm -f "ekiga-C.omf"; exit 1; } compilation error: file C/ekiga.xml line 10 element article xsltParseStylesheetProcess : document is not a stylesheet make[2]: *** [ekiga-C.omf] Error 1 make[2]: Leaving directory `/usr/local/ekiga-3.2.5/help' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/local/ekiga-3.2.5' make: *** [all] Error 2 I've seen this before and could not get around it. Any fix? Joe Comfort From Jim.Diamond at acadiau.ca Tue Jul 7 21:25:26 2009 From: Jim.Diamond at acadiau.ca (Jim Diamond) Date: Tue, 7 Jul 2009 18:25:26 -0300 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A53BBC0.3000604@pu-pm.univ-fcomte.fr> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> <20090707211215.GA27931@jdiamond-nb> <4A53BBC0.3000604@pu-pm.univ-fcomte.fr> Message-ID: <20090707212526.GB28497@jdiamond-nb> On Tue, Jul 7, 2009 at 23:18 (+0200), Eugen Dedu wrote: > Jim Diamond wrote: >> On Tue, Jul 7, 2009 at 21:31 (+0200), Eugen Dedu wrote: >> Thanks for the quick response. >>> Jim Diamond wrote: >>>> I tried compiling this on Knoppix 6.0.1 >>>> In the end I could not convince Knoppix, apt-get and ekiga's configure >>>> script to see eye-to-eye regarding dbus, and had to configure it with >>>> --disable-dbus >>> The main error is here. What is the error with dbus enabled? >> Here is the end of the output from configure: >> ------------------ >> checking for XV... yes >> checking for DBUS... configure: error: Package requirements (dbus-1 >= 0.36 dbus-glib-1 >= 0.36) were not met: >> No package 'dbus-1' found >> No package 'dbus-glib-1' found >> Consider adjusting the PKG_CONFIG_PATH environment variable if you >> installed software in a non-standard prefix. >> Alternatively, you may set the environment variables DBUS_CFLAGS >> and DBUS_LIBS to avoid the need to call pkg-config. >> See the pkg-config man page for more details. >> ------------------ >> OK, I'll just try installing dubs-1: >> ------------------ >> sudo apt-get install dbus-1 >> Reading package lists... Done >> Building dependency tree Reading state information... Done >> Package dbus-1 is not available, but is referred to by another package. >> This may mean that the package is missing, has been obsoleted, or >> is only available from another source >> However the following packages replace it: >> dbus >> E: Package dbus-1 has no installation candidate >> ------------------ > According to http://slackfind.net/en/packages/search/?name=dbus, on > slackware the package is named simply dbus. The missing dbus (and devices) are on Knoppix 6.0.1. Compiling it on Slackware was trivial. Slackware doesn't show up on the problem parade until #2 :-) > I'll check why ekiga configure shows dbus-1, not dbus... Jim From sevmek at free.fr Tue Jul 7 21:29:05 2009 From: sevmek at free.fr (yannick) Date: Tue, 07 Jul 2009 23:29:05 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A53BC8C.8090404@asu.edu> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <4A53BC8C.8090404@asu.edu> Message-ID: <4A53BE21.9090508@free.fr> Joseph Comfort a ?crit : > ptlib and opal compile fine on SuSE 11.1 with gcc 4.3.3. > > Ekiga is going very well (after disabling ldap) until: > Making all in help > make[2]: Entering directory `/usr/local/ekiga-3.2.5/help' > xsltproc -o ekiga-C.omf --stringparam db2omf.basename ekiga > --stringparam db2omf.format 'docbook' --stringparam db2omf.dtd > "-//OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang C > --stringparam db2omf.omf_dir "/usr/local/share/omf" --stringparam > db2omf.help_dir "/usr/local/share/gnome/help" --stringparam > db2omf.omf_in "/usr/local/ekiga-3.2.5/help/ekiga.omf.in" > `/usr/bin/pkg-config --variable db2omf gnome-doc-utils` C/ekiga.xml || { > rm -f "ekiga-C.omf"; exit 1; } > compilation error: file C/ekiga.xml line 10 element article > xsltParseStylesheetProcess : document is not a stylesheet > make[2]: *** [ekiga-C.omf] Error 1 > make[2]: Leaving directory `/usr/local/ekiga-3.2.5/help' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/usr/local/ekiga-3.2.5' > make: *** [all] Error 2 > > I've seen this before and could not get around it. Any fix? probably if you disable documentation (disable-doc or something like that, check in configure) > > Joe Comfort > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > From schaefec at googlemail.com Tue Jul 7 21:29:29 2009 From: schaefec at googlemail.com (=?ISO-8859-1?Q?Christian_Sch=E4fer?=) Date: Tue, 07 Jul 2009 17:29:29 -0400 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <20090707212526.GB28497@jdiamond-nb> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> <20090707211215.GA27931@jdiamond-nb> <4A53BBC0.3000604@pu-pm.univ-fcomte.fr> <20090707212526.GB28497@jdiamond-nb> Message-ID: <4A53BE39.7000600@googlemail.com> Jim Diamond wrote: > The missing dbus (and devices) are on Knoppix 6.0.1. > Compiling it on Slackware was trivial. Try installing libdbus-1-3, libdbus-1-dev, libdbus-glib-1-2, libdbus-glib-1-dev and see if that helps (the exact numbers may differ, though, 'apt-cache search libdbus' should give information on the exact names). Chris From Joseph.Comfort at asu.edu Tue Jul 7 22:02:39 2009 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Tue, 07 Jul 2009 15:02:39 -0700 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A53BE21.9090508@free.fr> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <4A53BC8C.8090404@asu.edu> <4A53BE21.9090508@free.fr> Message-ID: <4A53C5FF.8060901@asu.edu> yannick wrote: > Joseph Comfort a ?crit : >> ptlib and opal compile fine on SuSE 11.1 with gcc 4.3.3. >> >> Ekiga is going very well (after disabling ldap) until: >> Making all in help >> make[2]: Entering directory `/usr/local/ekiga-3.2.5/help' >> xsltproc -o ekiga-C.omf --stringparam db2omf.basename ekiga >> --stringparam db2omf.format 'docbook' --stringparam db2omf.dtd >> "-//OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang C >> --stringparam db2omf.omf_dir "/usr/local/share/omf" --stringparam >> db2omf.help_dir "/usr/local/share/gnome/help" --stringparam >> db2omf.omf_in "/usr/local/ekiga-3.2.5/help/ekiga.omf.in" >> `/usr/bin/pkg-config --variable db2omf gnome-doc-utils` C/ekiga.xml || { >> rm -f "ekiga-C.omf"; exit 1; } >> compilation error: file C/ekiga.xml line 10 element article >> xsltParseStylesheetProcess : document is not a stylesheet >> make[2]: *** [ekiga-C.omf] Error 1 >> make[2]: Leaving directory `/usr/local/ekiga-3.2.5/help' >> make[1]: *** [all-recursive] Error 1 >> make[1]: Leaving directory `/usr/local/ekiga-3.2.5' >> make: *** [all] Error 2 >> >> I've seen this before and could not get around it. Any fix? > > probably if you disable documentation (disable-doc or something like > that, check in configure) > > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > No, sorry, there is nothing that works. I tried --disable-schemas-install (a listed option); --disable-documentation; --disable-doc; --disable-help; and --without-help From Jim.Diamond at acadiau.ca Wed Jul 8 01:35:10 2009 From: Jim.Diamond at acadiau.ca (Jim Diamond) Date: Tue, 7 Jul 2009 22:35:10 -0300 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A53BE39.7000600@googlemail.com> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> <20090707211215.GA27931@jdiamond-nb> <4A53BBC0.3000604@pu-pm.univ-fcomte.fr> <20090707212526.GB28497@jdiamond-nb> <4A53BE39.7000600@googlemail.com> Message-ID: <20090708013509.GA29054@jdiamond-nb> On Tue, Jul 7, 2009 at 17:29 (-0400), Christian Sch?fer wrote: > Jim Diamond wrote: >> The missing dbus (and devices) are on Knoppix 6.0.1. >> Compiling it on Slackware was trivial. > Try installing libdbus-1-3, libdbus-1-dev, libdbus-glib-1-2, > libdbus-glib-1-dev and see if that helps (the exact numbers may differ, > though, 'apt-cache search libdbus' should give information on the exact > names). Chris, thanks very much for those hints. It turns out that by installing those (actually, I think it said I didn't need libdbus-glib-1-2, it was already there), I was able to get through the configure and compile. Unfortunately, it still doesn't notice that I have a camera attached to the system... Jim From schaefec at googlemail.com Wed Jul 8 01:45:50 2009 From: schaefec at googlemail.com (=?ISO-8859-1?Q?Christian_Sch=E4fer?=) Date: Tue, 07 Jul 2009 21:45:50 -0400 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <20090708013509.GA29054@jdiamond-nb> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> <20090707211215.GA27931@jdiamond-nb> <4A53BBC0.3000604@pu-pm.univ-fcomte.fr> <20090707212526.GB28497@jdiamond-nb> <4A53BE39.7000600@googlemail.com> <20090708013509.GA29054@jdiamond-nb> Message-ID: <4A53FA4E.7080500@googlemail.com> Jim Diamond wrote: >> Try installing libdbus-1-3, libdbus-1-dev, libdbus-glib-1-2, >> libdbus-glib-1-dev and see if that helps (the exact numbers may differ, >> though, 'apt-cache search libdbus' should give information on the exact >> names). > thanks very much for those hints. It turns out that by installing > those (actually, I think it said I didn't need libdbus-glib-1-2, it > was already there), I was able to get through the configure and compile. > > Unfortunately, it still doesn't notice that I have a camera attached > to the system... It may be the same problem, i.e. missing dev-packages. Perhaps libv4l-dev is missing on your system. When configuring ptlib, make sure it recognizes v4l2 in the output of ./configure. Afterwards, configure and compile ekiga (and opal to be on the safe side) again. Generally, it is always as good idea to check for missing things during the configure run. Hope that helps. Chris From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 8 06:50:28 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Jul 2009 08:50:28 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A53C5FF.8060901@asu.edu> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <4A53BC8C.8090404@asu.edu> <4A53BE21.9090508@free.fr> <4A53C5FF.8060901@asu.edu> Message-ID: <4A5441B4.6060309@pu-pm.univ-fcomte.fr> Joseph Comfort wrote: > > yannick wrote: >> Joseph Comfort a ?crit : >>> ptlib and opal compile fine on SuSE 11.1 with gcc 4.3.3. >>> >>> Ekiga is going very well (after disabling ldap) until: >>> Making all in help >>> make[2]: Entering directory `/usr/local/ekiga-3.2.5/help' >>> xsltproc -o ekiga-C.omf --stringparam db2omf.basename ekiga >>> --stringparam db2omf.format 'docbook' --stringparam db2omf.dtd >>> "-//OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang C >>> --stringparam db2omf.omf_dir "/usr/local/share/omf" --stringparam >>> db2omf.help_dir "/usr/local/share/gnome/help" --stringparam >>> db2omf.omf_in "/usr/local/ekiga-3.2.5/help/ekiga.omf.in" >>> `/usr/bin/pkg-config --variable db2omf gnome-doc-utils` C/ekiga.xml || { >>> rm -f "ekiga-C.omf"; exit 1; } >>> compilation error: file C/ekiga.xml line 10 element article >>> xsltParseStylesheetProcess : document is not a stylesheet >>> make[2]: *** [ekiga-C.omf] Error 1 >>> make[2]: Leaving directory `/usr/local/ekiga-3.2.5/help' >>> make[1]: *** [all-recursive] Error 1 >>> make[1]: Leaving directory `/usr/local/ekiga-3.2.5' >>> make: *** [all] Error 2 >>> >>> I've seen this before and could not get around it. Any fix? >> probably if you disable documentation (disable-doc or something like >> that, check in configure) >> >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > No, sorry, there is nothing that works. I tried > --disable-schemas-install (a listed option); --disable-documentation; > --disable-doc; --disable-help; and --without-help Could you try http://markmail.org/message/xxrsax2lkrutlfbd and subsequent answers in the list? They tell to make a modification related to pkg-config. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 8 06:54:03 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Jul 2009 08:54:03 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <20090707211215.GA27931@jdiamond-nb> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> <20090707211215.GA27931@jdiamond-nb> Message-ID: <4A54428B.9050600@pu-pm.univ-fcomte.fr> Jim Diamond wrote: > On Tue, Jul 7, 2009 at 21:31 (+0200), Eugen Dedu wrote: > > Thanks for the quick response. > >> Jim Diamond wrote: > >>> I tried compiling this on Knoppix 6.0.1 > >>> In the end I could not convince Knoppix, apt-get and ekiga's configure >>> script to see eye-to-eye regarding dbus, and had to configure it with >>> --disable-dbus > >> The main error is here. What is the error with dbus enabled? > > Here is the end of the output from configure: > > ------------------ > checking for XV... yes > checking for DBUS... configure: error: Package requirements (dbus-1 >= 0.36 dbus-glib-1 >= 0.36) were not met: > > No package 'dbus-1' found > No package 'dbus-glib-1' found > > Consider adjusting the PKG_CONFIG_PATH environment variable if you > installed software in a non-standard prefix. > > Alternatively, you may set the environment variables DBUS_CFLAGS > and DBUS_LIBS to avoid the need to call pkg-config. > See the pkg-config man page for more details. > ------------------ > > OK, I'll just try installing dubs-1: > > ------------------ > sudo apt-get install dbus-1 > Reading package lists... Done > Building dependency tree > Reading state information... Done > Package dbus-1 is not available, but is referred to by another package. > This may mean that the package is missing, has been obsoleted, or > is only available from another source > However the following packages replace it: > dbus > E: Package dbus-1 has no installation candidate > ------------------ > > It may well just be that I am not debian-compliant, but I don't know > what to install, and a (quick) web search did not help me on this one. > > > If someone can tell me how to make configure happy, I'd be even > happier. Or tell me which packages to install... > > > I tried fooling configure by saying > env DBUS_LIB=" " DBUS_CFLAGS=" " ./configure ... > but some compile or link eventually crashed and burned. > > > >>> Problem 1 >>> --------- >>> Unfortunately, it is unable to see any audio or video devices this >>> way. Does it use dbus to figure out the a/v devices, or do the >>> assembled masses think my problem is unrelated to that? > >> I think dbus is mandatory for device discovery. Could someone confirm? > >>> I also compiled it on Slackware 12.2 (an infinitely simpler process >>> than for Knoppix, as it turns out, using slight mods of the SlackBuild >>> scripts on www.slackbuild.org). > >>> Problem 2 >>> --------- >>> On Slackware ekiga refuses to see my ov511 web cam, although it is >>> happy with my Logitech web cam (a pwc-based web cam). Has ekiga given >>> up on older web cams? This web cam works happily with other video >>> applications on that system. > >> Have you libv4l library installed? If yes, please send the -d 4 output... > I have libv4l-0.5.7 compiled and installed with the Slackware 12.2 slackbuild. > > The output is a bit large to include here. You can get it from > http://cs.acadiau.ca/~jdiamond/ekiga-d4.out > > As I recall, older versions of ekiga (or maybe gnomemeeting) got you > to select V4L or V4L2. I don't see that choice any more. The camera > that works required, as I recall, V4L2 whereas this one required V4L. > So maybe the code to deal with V4L vs. V4L2 has an issue. You also need to add --enable-v4l in ptlib to enable v4l, since by default it is not activated (cf. http://wiki.ekiga.org/index.php/Compiling_Ekiga#PTLib_2). -- Eugen From dsandras at seconix.com Wed Jul 8 07:19:56 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 08 Jul 2009 09:19:56 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A53A27E.4010402@pu-pm.univ-fcomte.fr> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> Message-ID: <1247037596.5240.74.camel@scorpion.multitel.be> Le mardi 07 juillet 2009 ? 21:31 +0200, Eugen Dedu a ?crit : > > Problem 1 > > --------- > > Unfortunately, it is unable to see any audio or video devices this > > way. Does it use dbus to figure out the a/v devices, or do the > > assembled masses think my problem is unrelated to that? > > I think dbus is mandatory for device discovery. Could someone confirm? It is not. It should work without DBUS too (like the WIN32 release). Most probably the relevant ALSA and V4L2 plugins are not installed. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Joseph.Comfort at asu.edu Wed Jul 8 16:39:21 2009 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Wed, 08 Jul 2009 09:39:21 -0700 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A5441B4.6060309@pu-pm.univ-fcomte.fr> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <4A53BC8C.8090404@asu.edu> <4A53BE21.9090508@free.fr> <4A53C5FF.8060901@asu.edu> <4A5441B4.6060309@pu-pm.univ-fcomte.fr> Message-ID: <4A54CBB9.2010102@asu.edu> Eugen Dedu wrote: > Joseph Comfort wrote: >> >> yannick wrote: >>> Joseph Comfort a ?crit : >>>> ptlib and opal compile fine on SuSE 11.1 with gcc 4.3.3. >>>> >>>> Ekiga is going very well (after disabling ldap) until: >>>> Making all in help >>>> make[2]: Entering directory `/usr/local/ekiga-3.2.5/help' >>>> xsltproc -o ekiga-C.omf --stringparam db2omf.basename ekiga >>>> --stringparam db2omf.format 'docbook' --stringparam db2omf.dtd >>>> "-//OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang C >>>> --stringparam db2omf.omf_dir "/usr/local/share/omf" --stringparam >>>> db2omf.help_dir "/usr/local/share/gnome/help" --stringparam >>>> db2omf.omf_in "/usr/local/ekiga-3.2.5/help/ekiga.omf.in" >>>> `/usr/bin/pkg-config --variable db2omf gnome-doc-utils` C/ekiga.xml >>>> || { >>>> rm -f "ekiga-C.omf"; exit 1; } >>>> compilation error: file C/ekiga.xml line 10 element article >>>> xsltParseStylesheetProcess : document is not a stylesheet >>>> make[2]: *** [ekiga-C.omf] Error 1 >>>> make[2]: Leaving directory `/usr/local/ekiga-3.2.5/help' >>>> make[1]: *** [all-recursive] Error 1 >>>> make[1]: Leaving directory `/usr/local/ekiga-3.2.5' >>>> make: *** [all] Error 2 >>>> >>>> I've seen this before and could not get around it. Any fix? >>> probably if you disable documentation (disable-doc or something like >>> that, check in configure) >>> >>> ekiga-list mailing list >>> ekiga-list at gnome.org >>> http://mail.gnome.org/mailman/listinfo/ekiga-list >>> >> No, sorry, there is nothing that works. I tried >> --disable-schemas-install (a listed option); --disable-documentation; >> --disable-doc; --disable-help; and --without-help > > Could you try http://markmail.org/message/xxrsax2lkrutlfbd and > subsequent answers in the list? They tell to make a modification > related to pkg-config. > OK, that does it. Thanks. Being a KDE user on a non-debian system, I normally do not install much in the way of gnome stuff. But I found the package for gnome-doc-utils. Can Ekiga be made a bit less platform specific? Ekiga runs and connects to the MCU at the other end. The bouncing ball is transmitted. There is no sound in either direction. (There was no meeting, but I get a 'welcome' message otherwise.) I get messages on user login about the sound system not being set up. There are similar messages with Ekiga starts. The problem is somewhere in the sound system, and I have not been able to track it down yet. Otherwise, there is progress. Joe From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 8 16:46:36 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Jul 2009 18:46:36 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A54CBB9.2010102@asu.edu> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <4A53BC8C.8090404@asu.edu> <4A53BE21.9090508@free.fr> <4A53C5FF.8060901@asu.edu> <4A5441B4.6060309@pu-pm.univ-fcomte.fr> <4A54CBB9.2010102@asu.edu> Message-ID: <4A54CD6C.7050907@pu-pm.univ-fcomte.fr> Joseph Comfort wrote: > > Eugen Dedu wrote: >> Joseph Comfort wrote: >>> yannick wrote: >>>> Joseph Comfort a ?crit : >>>>> ptlib and opal compile fine on SuSE 11.1 with gcc 4.3.3. >>>>> >>>>> Ekiga is going very well (after disabling ldap) until: >>>>> Making all in help >>>>> make[2]: Entering directory `/usr/local/ekiga-3.2.5/help' >>>>> xsltproc -o ekiga-C.omf --stringparam db2omf.basename ekiga >>>>> --stringparam db2omf.format 'docbook' --stringparam db2omf.dtd >>>>> "-//OASIS//DTD DocBook XML V4.1.2//EN" --stringparam db2omf.lang C >>>>> --stringparam db2omf.omf_dir "/usr/local/share/omf" --stringparam >>>>> db2omf.help_dir "/usr/local/share/gnome/help" --stringparam >>>>> db2omf.omf_in "/usr/local/ekiga-3.2.5/help/ekiga.omf.in" >>>>> `/usr/bin/pkg-config --variable db2omf gnome-doc-utils` C/ekiga.xml >>>>> || { >>>>> rm -f "ekiga-C.omf"; exit 1; } >>>>> compilation error: file C/ekiga.xml line 10 element article >>>>> xsltParseStylesheetProcess : document is not a stylesheet >>>>> make[2]: *** [ekiga-C.omf] Error 1 >>>>> make[2]: Leaving directory `/usr/local/ekiga-3.2.5/help' >>>>> make[1]: *** [all-recursive] Error 1 >>>>> make[1]: Leaving directory `/usr/local/ekiga-3.2.5' >>>>> make: *** [all] Error 2 >>>>> >>>>> I've seen this before and could not get around it. Any fix? >>>> probably if you disable documentation (disable-doc or something like >>>> that, check in configure) >>>> >>>> ekiga-list mailing list >>>> ekiga-list at gnome.org >>>> http://mail.gnome.org/mailman/listinfo/ekiga-list >>>> >>> No, sorry, there is nothing that works. I tried >>> --disable-schemas-install (a listed option); --disable-documentation; >>> --disable-doc; --disable-help; and --without-help >> Could you try http://markmail.org/message/xxrsax2lkrutlfbd and >> subsequent answers in the list? They tell to make a modification >> related to pkg-config. >> > OK, that does it. Thanks. Being a KDE user on a non-debian system, I > normally do not install much in the way of gnome stuff. But I found the > package for gnome-doc-utils. Can Ekiga be made a bit less platform > specific? I think it could :o), but someone with spare time must implement it :o) So you had this error until you installed gnome-doc-utils? If yes, we should put it as mandatory dep or see how to deal with it without installing it. > Ekiga runs and connects to the MCU at the other end. The bouncing ball > is transmitted. There is no sound in either direction. (There was no > meeting, but I get a 'welcome' message otherwise.) > > I get messages on user login about the sound system not being set up. > There are similar messages with Ekiga starts. The problem is somewhere > in the sound system, and I have not been able to track it down yet. You need to send the -d 4 output. > Otherwise, there is progress. :o) > Joe > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Eugen From simon at kmun.gov.kw Wed Jul 8 18:11:30 2009 From: simon at kmun.gov.kw (Benedict simon) Date: Wed, 8 Jul 2009 21:11:30 +0300 (AST) Subject: [Ekiga-list] apprecite your help in implementing ekiga Message-ID: Dear All, we have a network which connects 3 builings with Fibre . we do have a plan to implement chat, voice and video conferencing for our internal users to be more precise any user in one building should be able to chat, voice and video with another user in the same building or another i do have a linux server all users have private IPs and all users are windows users i was gooling around n found ekiga would be able to do the above. like install ekiga on the linux server but really could not get the hang of it after reading the docs on site would ekiga help me to do the above or s there any software on linux that would help me apprecite your kind advice and help regards simon -- Network ADMIN ------------- KUWAIT MUNICIPALITY: -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. From dsandras at seconix.com Wed Jul 8 18:35:23 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 08 Jul 2009 20:35:23 +0200 Subject: [Ekiga-list] apprecite your help in implementing ekiga In-Reply-To: References: Message-ID: <1247078123.3831.8.camel@scorpion.multitel.be> Le mercredi 08 juillet 2009 ? 21:11 +0300, Benedict simon a ?crit : > > > Dear All, > > we have a network which connects 3 builings with Fibre . > we do have a plan to implement chat, voice and video conferencing for our > internal users > > to be more precise > > any user in one building should be able to chat, voice and video with > another user in the same building or another > i do have a linux server > > all users have private IPs and all users are windows users > > i was gooling around n found ekiga would be able to do the above. > like install ekiga on the linux server > > but really could not get the hang of it after reading the docs on site > > would ekiga help me to do the above or s there any software on linux that > would help me > > apprecite your kind advice and help > > regards > You both need a server and clients. The server can be kamailio (kamailio.org) or Asterisk (asterisk.org), it will run on Linux. The client can be Ekiga. But on WIN32, it is not 100% perfect yet. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 8 19:09:02 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Jul 2009 21:09:02 +0200 Subject: [Ekiga-list] apprecite your help in implementing ekiga In-Reply-To: <1247078123.3831.8.camel@scorpion.multitel.be> References: <1247078123.3831.8.camel@scorpion.multitel.be> Message-ID: <4A54EECE.4090102@pu-pm.univ-fcomte.fr> Damien Sandras wrote: > Le mercredi 08 juillet 2009 ? 21:11 +0300, Benedict simon a ?crit : >> >> Dear All, >> >> we have a network which connects 3 builings with Fibre . >> we do have a plan to implement chat, voice and video conferencing for our >> internal users >> >> to be more precise >> >> any user in one building should be able to chat, voice and video with >> another user in the same building or another >> i do have a linux server >> >> all users have private IPs and all users are windows users >> >> i was gooling around n found ekiga would be able to do the above. >> like install ekiga on the linux server >> >> but really could not get the hang of it after reading the docs on site >> >> would ekiga help me to do the above or s there any software on linux that >> would help me >> >> apprecite your kind advice and help >> >> regards >> > > You both need a server and clients. > The server can be kamailio (kamailio.org) or Asterisk (asterisk.org), it > will run on Linux. > The client can be Ekiga. But on WIN32, it is not 100% perfect yet. Couldn't this work without any server too? Ekiga works in a LAN (Neighbours tab in roster). -- Eugen From dsandras at seconix.com Wed Jul 8 20:35:54 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 08 Jul 2009 22:35:54 +0200 Subject: [Ekiga-list] apprecite your help in implementing ekiga In-Reply-To: <4A54EECE.4090102@pu-pm.univ-fcomte.fr> References: <1247078123.3831.8.camel@scorpion.multitel.be> <4A54EECE.4090102@pu-pm.univ-fcomte.fr> Message-ID: <1247085354.3831.11.camel@scorpion.multitel.be> Le mercredi 08 juillet 2009 ? 21:09 +0200, Eugen Dedu a ?crit : > Damien Sandras wrote: > > Le mercredi 08 juillet 2009 ? 21:11 +0300, Benedict simon a ?crit : > >> > >> Dear All, > >> > >> we have a network which connects 3 builings with Fibre . > >> we do have a plan to implement chat, voice and video conferencing for our > >> internal users > >> > >> to be more precise > >> > >> any user in one building should be able to chat, voice and video with > >> another user in the same building or another > >> i do have a linux server > >> > >> all users have private IPs and all users are windows users > >> > >> i was gooling around n found ekiga would be able to do the above. > >> like install ekiga on the linux server > >> > >> but really could not get the hang of it after reading the docs on site > >> > >> would ekiga help me to do the above or s there any software on linux that > >> would help me > >> > >> apprecite your kind advice and help > >> > >> regards > >> > > > > You both need a server and clients. > > The server can be kamailio (kamailio.org) or Asterisk (asterisk.org), it > > will run on Linux. > > The client can be Ekiga. But on WIN32, it is not 100% perfect yet. > > Couldn't this work without any server too? Ekiga works in a LAN > (Neighbours tab in roster). That's right. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 8 20:46:40 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 08 Jul 2009 22:46:40 +0200 Subject: [Ekiga-list] apprecite your help in implementing ekiga In-Reply-To: <1247085354.3831.11.camel@scorpion.multitel.be> References: <1247078123.3831.8.camel@scorpion.multitel.be> <4A54EECE.4090102@pu-pm.univ-fcomte.fr> <1247085354.3831.11.camel@scorpion.multitel.be> Message-ID: <4A5505B0.3000809@pu-pm.univ-fcomte.fr> Damien Sandras wrote: > Le mercredi 08 juillet 2009 ? 21:09 +0200, Eugen Dedu a ?crit : >> Damien Sandras wrote: >>> Le mercredi 08 juillet 2009 ? 21:11 +0300, Benedict simon a ?crit : >>>> Dear All, >>>> >>>> we have a network which connects 3 builings with Fibre . >>>> we do have a plan to implement chat, voice and video conferencing for our >>>> internal users >>>> >>>> to be more precise >>>> >>>> any user in one building should be able to chat, voice and video with >>>> another user in the same building or another >>>> i do have a linux server >>>> >>>> all users have private IPs and all users are windows users >>>> >>>> i was gooling around n found ekiga would be able to do the above. >>>> like install ekiga on the linux server >>>> >>>> but really could not get the hang of it after reading the docs on site >>>> >>>> would ekiga help me to do the above or s there any software on linux that >>>> would help me >>>> >>>> apprecite your kind advice and help >>>> >>>> regards >>>> >>> You both need a server and clients. >>> The server can be kamailio (kamailio.org) or Asterisk (asterisk.org), it >>> will run on Linux. >>> The client can be Ekiga. But on WIN32, it is not 100% perfect yet. >> Couldn't this work without any server too? Ekiga works in a LAN >> (Neighbours tab in roster). > > That's right. Ah!, I forgot that neighbours tab does not work on windows version of ekiga. So the server is still needed! -- Eugen From Jim.Diamond at acadiau.ca Thu Jul 9 01:44:41 2009 From: Jim.Diamond at acadiau.ca (Jim Diamond) Date: Wed, 8 Jul 2009 22:44:41 -0300 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A53FA4E.7080500@googlemail.com> References: <20090707191820.GB27140@jdiamond-nb> <4A53A27E.4010402@pu-pm.univ-fcomte.fr> <20090707211215.GA27931@jdiamond-nb> <4A53BBC0.3000604@pu-pm.univ-fcomte.fr> <20090707212526.GB28497@jdiamond-nb> <4A53BE39.7000600@googlemail.com> <20090708013509.GA29054@jdiamond-nb> <4A53FA4E.7080500@googlemail.com> Message-ID: <20090709014441.GA5645@jdiamond-nb> On Tue, Jul 7, 2009 at 21:45 (-0400), Christian Sch?fer wrote: > Jim Diamond wrote: >>> Try installing libdbus-1-3, libdbus-1-dev, libdbus-glib-1-2, >>> libdbus-glib-1-dev and see if that helps (the exact numbers may >>> differ, though, 'apt-cache search libdbus' should give information on >>> the exact names). >> thanks very much for those hints. It turns out that by installing >> those (actually, I think it said I didn't need libdbus-glib-1-2, it >> was already there), I was able to get through the configure and compile. >> Unfortunately, it still doesn't notice that I have a camera attached >> to the system... > It may be the same problem, i.e. missing dev-packages. Perhaps libv4l-dev > is missing on your system. When configuring ptlib, make sure it recognizes > v4l2 in the output of ./configure. Afterwards, configure and compile ekiga > (and opal to be on the safe side) again. Generally, it is always as good > idea to check for missing things during the configure run. > Hope that helps. You also need to add --enable-v4l in ptlib to enable v4l, since by default it is not activated (cf. http://wiki.ekiga.org/index.php/Compiling_Ekiga#PTLib_2). On Wed, 08 Jul 2009 08:54:03 Eugen Dedu wrote > You also need to add --enable-v4l in ptlib to enable v4l, since by default > it is not activated (cf. > http://wiki.ekiga.org/index.php/Compiling_Ekiga#PTLib_2). Chris and Eugen, thanks for the help. I am clearly (still) missing a lot of packages to make a truly functional version of ekiga on Knoppix, but things are moving forward a bit. (**sigh** 10 minutes on Slackware, multiple hours and counting on Knoppix...) It now sees both of my web cams (although it seems to be using V4L and not V4L2 for my QuickCam Notebook Pro), which is a huge step forward. It doesn't see that web cam's built-in mic, but it does see the laptop's mic. Anyway, thanks again for your help. Jim From nels at pgroupe.net Thu Jul 9 06:38:23 2009 From: nels at pgroupe.net (=?ISO-8859-1?Q?Beno=EEt?= Laniel) Date: Thu, 09 Jul 2009 08:38:23 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 on Lenny Message-ID: <1247121503.13252.2.camel@oneil.pgroupe.net> Hi, I played a lot with ekiga recently and was very happy to see 3.2.5 coming. So I decided to share the packages (i386 and amd64) I made for my personal use (in fact, I only compiled for Lenny the great packages made by the Debian Developers). Only one problem so far: I had to compile ekiga with g++ from Squeeze, I don't remember the error exactly. You can download them from http://blaniel.free.fr/debian/ekiga Or add 'deb http://blaniel.free.fr/debian/ekiga ./' to your sources.list. Bonus is libopal3.6.4-plugins-nonfree (h263, h263p, h264 and ilbc). It is compiled with libavcodec and libx264 linked statically. I had to do this because installing debian-multimedia.org's libavcodec breaks some programs (in my case vlc with mpeg ts containing h264) and the latest libx264 doesn't work with the GXV3000 (I used the latest version working, I still need to find what breaked the compatibility). I hope it will be useful to someone. Thanks to all the developers who made this great software. Beno?t Laniel From dsandras at seconix.com Thu Jul 9 06:43:21 2009 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 09 Jul 2009 08:43:21 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 on Lenny In-Reply-To: <1247121503.13252.2.camel@oneil.pgroupe.net> References: <1247121503.13252.2.camel@oneil.pgroupe.net> Message-ID: <1247121801.3831.24.camel@scorpion.multitel.be> Le jeudi 09 juillet 2009 ? 08:38 +0200, Beno?t Laniel a ?crit : > Hi, > > I played a lot with ekiga recently and was very happy to see 3.2.5 > coming. So I decided to share the packages (i386 and amd64) I made > for my personal use (in fact, I only compiled for Lenny the great > packages made by the Debian Developers). Only one problem so far: > I had to compile ekiga with g++ from Squeeze, I don't remember the > error exactly. > > You can download them from http://blaniel.free.fr/debian/ekiga > Or add 'deb http://blaniel.free.fr/debian/ekiga ./' to your > sources.list. > > Bonus is libopal3.6.4-plugins-nonfree (h263, h263p, h264 and ilbc). It > is compiled with libavcodec and libx264 linked statically. I had to do > this because installing debian-multimedia.org's libavcodec breaks some > programs (in my case vlc with mpeg ts containing h264) and the latest > libx264 doesn't work with the GXV3000 (I used the latest version > working, I still need to find what breaked the compatibility). > > I hope it will be useful to someone. > > Thanks to all the developers who made this great software. Thanks to all the great users :-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Jul 9 08:14:08 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 09 Jul 2009 10:14:08 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 on Lenny In-Reply-To: <1247121503.13252.2.camel@oneil.pgroupe.net> References: <1247121503.13252.2.camel@oneil.pgroupe.net> Message-ID: <4A55A6D0.3000202@pu-pm.univ-fcomte.fr> Beno?t Laniel wrote: > Hi, > > I played a lot with ekiga recently and was very happy to see 3.2.5 > coming. So I decided to share the packages (i386 and amd64) I made > for my personal use (in fact, I only compiled for Lenny the great > packages made by the Debian Developers). Only one problem so far: > I had to compile ekiga with g++ from Squeeze, I don't remember the > error exactly. > > You can download them from http://blaniel.free.fr/debian/ekiga > Or add 'deb http://blaniel.free.fr/debian/ekiga ./' to your > sources.list. > > Bonus is libopal3.6.4-plugins-nonfree (h263, h263p, h264 and ilbc). It > is compiled with libavcodec and libx264 linked statically. I had to do > this because installing debian-multimedia.org's libavcodec breaks some > programs (in my case vlc with mpeg ts containing h264) and the latest > libx264 doesn't work with the GXV3000 (I used the latest version > working, I still need to find what breaked the compatibility). > > I hope it will be useful to someone. Thanks! Could you upload it to http://backports.org/dokuwiki/doku.php ? Thus is becomes "official". -- Eugen From andre at bwh.harvard.edu Thu Jul 9 13:41:20 2009 From: andre at bwh.harvard.edu (Andre Robatino) Date: Thu, 09 Jul 2009 09:41:20 -0400 Subject: [Ekiga-list] ekiga.net server down again Message-ID: <4A55F380.7000106@bwh.harvard.edu> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The server is down again. It's been down for at least a few hours. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/ iEYEARECAAYFAkpV84AACgkQ0pavuo9EGO//MgCfaatFlSmtcaiKx86m5QCz2tFu R1cAn2OkNsgR5YYNgm9LnAnkT/7fuOJO =Qs5Q -----END PGP SIGNATURE----- From dsandras at seconix.com Thu Jul 9 13:47:42 2009 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 09 Jul 2009 15:47:42 +0200 Subject: [Ekiga-list] ekiga.net server down again In-Reply-To: <4A55F380.7000106@bwh.harvard.edu> References: <4A55F380.7000106@bwh.harvard.edu> Message-ID: <1247147262.3831.46.camel@scorpion.multitel.be> Le jeudi 09 juillet 2009 ? 09:41 -0400, Andre Robatino a ?crit : > The server is down again. It's been down for at least a few hours. It should be back, thanks for warning us! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jan at willamowius.de Thu Jul 9 13:52:47 2009 From: jan at willamowius.de (Jan Willamowius) Date: Thu, 9 Jul 2009 15:52:47 +0200 Subject: [Ekiga-list] ekiga.net server down again In-Reply-To: <4A55F380.7000106@bwh.harvard.edu> References: <4A55F380.7000106@bwh.harvard.edu> Message-ID: <20090709155247.4550672a@janhh3.site> I'm not sure what kind of process is dying on ekiga.net, but sometimes it can be very helpful to use an automatic restarter until the real problem is fixed: #!/bin/sh START_PROC="/usr/local/bin/dying_process -a -b -c" NOTIFY_EMAIL="foo at bar.com" while :; do $START_PROC EXITSTATUS=$? if [ $EXITSTATUS -gt 128 ]; then echo "Process has crashed" | /usr/bin/mail -s "Crash"$NOTIFY_EMAIL elif [ $EXITSTATUS == 0 ]; then echo "Normally Stoped" exit fi echo "Restarting Process" sleep 4 done Andre Robatino wrote: > The server is down again. It's been down for at least a few hours. -- Jan Willamowius, jan at willamowius.de, http://www.gnugk.org/ From dsandras at seconix.com Thu Jul 9 14:11:54 2009 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 09 Jul 2009 16:11:54 +0200 Subject: [Ekiga-list] ekiga.net server down again In-Reply-To: <20090709155247.4550672a@janhh3.site> References: <4A55F380.7000106@bwh.harvard.edu> <20090709155247.4550672a@janhh3.site> Message-ID: <1247148714.3831.47.camel@scorpion.multitel.be> I'll do something like that. The program is started by a wrapper though. Le jeudi 09 juillet 2009 ? 15:52 +0200, Jan Willamowius a ?crit : > I'm not sure what kind of process is dying on ekiga.net, but sometimes > it can be very helpful to use an automatic restarter until the real > problem is fixed: > > #!/bin/sh > > START_PROC="/usr/local/bin/dying_process -a -b -c" > NOTIFY_EMAIL="foo at bar.com" > > while :; do > $START_PROC > EXITSTATUS=$? > if [ $EXITSTATUS -gt 128 ]; then > echo "Process has crashed" | /usr/bin/mail -s "Crash"$NOTIFY_EMAIL > elif [ $EXITSTATUS == 0 ]; then > echo "Normally Stoped" > exit > fi > echo "Restarting Process" > sleep 4 > done > > > > > Andre Robatino wrote: > > The server is down again. It's been down for at least a few hours. > -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From hs.samix at gmail.com Thu Jul 9 16:08:00 2009 From: hs.samix at gmail.com (H.S.) Date: Thu, 09 Jul 2009 12:08:00 -0400 Subject: [Ekiga-list] ekiga not "normal" in Juanty and Debian Testing Message-ID: Hello, I have Ekiga in Debian Testing as well as on Jaunty machines. Debian got the new version only a few months ago. I have noticed two main things: 1. During a call, Ekiga appears to hog the CPU (40%~70%). I already reported this here some weeks ago (so let's just keep this in that thread only and focus on the following point here). 2. After ending a call and trying more calls is problematic. Or perhaps it is the length of time that Ekiga has been running. But after some time, the remote user is usually reported to be not available and I cannot make further calls. Anyone else having these problems? I have, on Debian: Ekiga 3.2.1~git20090515.9d0263-1 and on Juanty: Ekiga 3.2.0-0ubuntu2 Thanks and regards, ->HS -- Please reply to this list only. I read this list on its corresponding newsgroup on gmane.org. Replies sent to my email address are just filtered to a folder in my mailbox and get periodically deleted without ever having been read. From Eugen.Dedu at pu-pm.univ-fcomte.fr Thu Jul 9 16:40:02 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Thu, 09 Jul 2009 18:40:02 +0200 Subject: [Ekiga-list] ekiga not "normal" in Juanty and Debian Testing In-Reply-To: References: Message-ID: <4A561D62.40308@pu-pm.univ-fcomte.fr> H.S. wrote: > Hello, > > I have Ekiga in Debian Testing as well as on Jaunty machines. Debian got > the new version only a few months ago. I have noticed two main things: > 1. During a call, Ekiga appears to hog the CPU (40%~70%). I already > reported this here some weeks ago (so let's just keep this in that > thread only and focus on the following point here). I 2 days the 3.2.5 ekiga should be available in unstable. Please test with this one and tell if the CPU is high. If yes, we will fix it for 3.2.6. > 2. After ending a call and trying more calls is problematic. Or perhaps > it is the length of time that Ekiga has been running. But after some > time, the remote user is usually reported to be not available and I > cannot make further calls. This also is interesting. The -d 4 output is precious, please give it to us. > Anyone else having these problems? > I have, on Debian: Ekiga 3.2.1~git20090515.9d0263-1 > and on Juanty: Ekiga 3.2.0-0ubuntu2 -- Eugen From hs.samix at gmail.com Thu Jul 9 16:51:07 2009 From: hs.samix at gmail.com (H.S.) Date: Thu, 09 Jul 2009 12:51:07 -0400 Subject: [Ekiga-list] ekiga not "normal" in Juanty and Debian Testing In-Reply-To: <4A561D62.40308@pu-pm.univ-fcomte.fr> References: <4A561D62.40308@pu-pm.univ-fcomte.fr> Message-ID: Eugen Dedu wrote: > H.S. wrote: >> Hello, >> >> I have Ekiga in Debian Testing as well as on Jaunty machines. Debian got >> the new version only a few months ago. I have noticed two main things: >> 1. During a call, Ekiga appears to hog the CPU (40%~70%). I already >> reported this here some weeks ago (so let's just keep this in that >> thread only and focus on the following point here). > > I 2 days the 3.2.5 ekiga should be available in unstable. Please test > with this one and tell if the CPU is high. If yes, we will fix it for > 3.2.6. Wonderful! > >> 2. After ending a call and trying more calls is problematic. Or perhaps >> it is the length of time that Ekiga has been running. But after some >> time, the remote user is usually reported to be not available and I >> cannot make further calls. > > This also is interesting. The -d 4 output is precious, please give it > to us. Okay. I will start ekiga with -d 4 now and will report when my remote user is available and we try to talk. Thanks, regards. -- Please reply to this list only. I read this list on its corresponding newsgroup on gmane.org. Replies sent to my email address are just filtered to a folder in my mailbox and get periodically deleted without ever having been read. From hs.samix at gmail.com Thu Jul 9 18:54:13 2009 From: hs.samix at gmail.com (H.S.) Date: Thu, 09 Jul 2009 14:54:13 -0400 Subject: [Ekiga-list] ekiga not "normal" in Juanty and Debian Testing In-Reply-To: <4A561D62.40308@pu-pm.univ-fcomte.fr> References: <4A561D62.40308@pu-pm.univ-fcomte.fr> Message-ID: Eugen Dedu wrote: > H.S. wrote: >> Hello, >> >> I have Ekiga in Debian Testing as well as on Jaunty machines. Debian got >> the new version only a few months ago. I have noticed two main things: >> 1. During a call, Ekiga appears to hog the CPU (40%~70%). I already >> reported this here some weeks ago (so let's just keep this in that >> thread only and focus on the following point here). > > I 2 days the 3.2.5 ekiga should be available in unstable. Please test > with this one and tell if the CPU is high. If yes, we will fix it for > 3.2.6. > >> 2. After ending a call and trying more calls is problematic. Or perhaps >> it is the length of time that Ekiga has been running. But after some >> time, the remote user is usually reported to be not available and I >> cannot make further calls. > > This also is interesting. The -d 4 output is precious, please give it > to us. Unfortunately, the remote user was not at the computer for this experiment. However, when I tried to call him anyway, I got a message in -d 4 output that the remote user was temporarily unavailable. I will try this again tomorrow when I get a chance (and I will save the -d 4 output to a file, which I forgot to do this time). regards. -- Please reply to this list only. I read this list on its corresponding newsgroup on gmane.org. Replies sent to my email address are just filtered to a folder in my mailbox and get periodically deleted without ever having been read. From andre at bwh.harvard.edu Thu Jul 9 23:07:49 2009 From: andre at bwh.harvard.edu (Andre Robatino) Date: Thu, 09 Jul 2009 19:07:49 -0400 Subject: [Ekiga-list] server down again Message-ID: <4A567845.9000507@bwh.harvard.edu> Down again. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 260 bytes Desc: OpenPGP digital signature URL: From tparker at cpsco.net Fri Jul 10 04:32:41 2009 From: tparker at cpsco.net (Allen T Parker) Date: Thu, 09 Jul 2009 21:32:41 -0700 Subject: [Ekiga-list] server down again In-Reply-To: <4A567845.9000507@bwh.harvard.edu> References: <4A567845.9000507@bwh.harvard.edu> Message-ID: <1247200361.28764.1.camel@localhost> Still Down! Any idea when it will be back up? On Thu, 2009-07-09 at 19:07 -0400, Andre Robatino wrote: > Down again. > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From mateusz.kaduk at gmail.com Fri Jul 10 05:21:30 2009 From: mateusz.kaduk at gmail.com (Mateusz Kaduk) Date: Fri, 10 Jul 2009 07:21:30 +0200 Subject: [Ekiga-list] Ekiga contact presence Message-ID: Hi, I am on Debian (sid) still using 3.2.1~git20090515. I would like to know if this issue was fixed in upcomming 3.2.5. The problem is with contact availability status it gets rarely updated if ever. How does ekiga server determinate if user is still online? Are there any ping-pong requests send ? My girlfriend turns off ekiga, but I still see her online, when I come back I try calling, after restarting ekiga this status is updated. How long it takes to update user status in a normal working case ? Is it a bug or just design ? Thanks in advance, From dsandras at seconix.com Fri Jul 10 06:51:32 2009 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 10 Jul 2009 08:51:32 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <1247200361.28764.1.camel@localhost> References: <4A567845.9000507@bwh.harvard.edu> <1247200361.28764.1.camel@localhost> Message-ID: <1247208692.18172.8.camel@scorpion.multitel.be> Le jeudi 09 juillet 2009 ? 21:32 -0700, Allen T Parker a ?crit : > Still Down! Any idea when it will be back up? It's back. I definitely need to upgrade and take the time to monitor the service. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Fri Jul 10 06:56:52 2009 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 10 Jul 2009 08:56:52 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: References: Message-ID: <1247209012.18172.13.camel@scorpion.multitel.be> Hi, Le vendredi 10 juillet 2009 ? 07:21 +0200, Mateusz Kaduk a ?crit : > Hi, > > I am on Debian (sid) still using 3.2.1~git20090515. I would like to > know if this issue was fixed in upcomming 3.2.5. > The problem is with contact availability status it gets rarely updated if ever. > > How does ekiga server determinate if user is still online? Are there > any ping-pong requests send ? > My girlfriend turns off ekiga, but I still see her online, when I come > back I try calling, after restarting ekiga this status is updated. > > How long it takes to update user status in a normal working case ? Is > it a bug or just design ? > It is most probably a NAT issue or a server problem. There is no such known problem in Ekiga. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Jul 10 10:13:27 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 10 Jul 2009 12:13:27 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: References: Message-ID: <4A571447.8020302@pu-pm.univ-fcomte.fr> Mateusz Kaduk wrote: > Hi, > > I am on Debian (sid) still using 3.2.1~git20090515. I would like to > know if this issue was fixed in upcomming 3.2.5. > The problem is with contact availability status it gets rarely updated if ever. > > How does ekiga server determinate if user is still online? Are there > any ping-pong requests send ? > My girlfriend turns off ekiga, but I still see her online, when I come > back I try calling, after restarting ekiga this status is updated. > > How long it takes to update user status in a normal working case ? Is > it a bug or just design ? If I remember correctly, when a person quits ekiga, there is no update sent on the server. However, the server (or the client) periodically (15 min I think) sends info to remote party about the presence. So, when a person quits ekiga, it will take at most 15 min to update his presence. Quitting ekiga does not send an update because people wanted that ekiga finishes fast. I still think that it is better that ekiga sends an update and waits for the answer, even if it takes a 1-3 seconds. The proper fix would be to hide that from the user, for ex. when the user quits the GUI finishes, but not the program. -- Eugen From dsandras at seconix.com Fri Jul 10 10:18:36 2009 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 10 Jul 2009 12:18:36 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <4A571447.8020302@pu-pm.univ-fcomte.fr> References: <4A571447.8020302@pu-pm.univ-fcomte.fr> Message-ID: <1247221116.18172.34.camel@scorpion.multitel.be> Le vendredi 10 juillet 2009 ? 12:13 +0200, Eugen Dedu a ?crit : > Mateusz Kaduk wrote: > > Hi, > > > > I am on Debian (sid) still using 3.2.1~git20090515. I would like to > > know if this issue was fixed in upcomming 3.2.5. > > The problem is with contact availability status it gets rarely updated if ever. > > > > How does ekiga server determinate if user is still online? Are there > > any ping-pong requests send ? > > My girlfriend turns off ekiga, but I still see her online, when I come > > back I try calling, after restarting ekiga this status is updated. > > > > How long it takes to update user status in a normal working case ? Is > > it a bug or just design ? > > If I remember correctly, when a person quits ekiga, there is no update > sent on the server. However, the server (or the client) periodically > (15 min I think) sends info to remote party about the presence. So, > when a person quits ekiga, it will take at most 15 min to update his > presence. > > Quitting ekiga does not send an update because people wanted that ekiga > finishes fast. I still think that it is better that ekiga sends an > update and waits for the answer, even if it takes a 1-3 seconds. The > proper fix would be to hide that from the user, for ex. when the user > quits the GUI finishes, but not the program. > Like it was before, but users complained that it did not exit cleanly. Users generally do not agree between themselves ;-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Jul 10 10:22:08 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 10 Jul 2009 12:22:08 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <1247221116.18172.34.camel@scorpion.multitel.be> References: <4A571447.8020302@pu-pm.univ-fcomte.fr> <1247221116.18172.34.camel@scorpion.multitel.be> Message-ID: <4A571650.6070206@pu-pm.univ-fcomte.fr> Damien Sandras wrote: > Le vendredi 10 juillet 2009 ? 12:13 +0200, Eugen Dedu a ?crit : >> Mateusz Kaduk wrote: >>> Hi, >>> >>> I am on Debian (sid) still using 3.2.1~git20090515. I would like to >>> know if this issue was fixed in upcomming 3.2.5. >>> The problem is with contact availability status it gets rarely updated if ever. >>> >>> How does ekiga server determinate if user is still online? Are there >>> any ping-pong requests send ? >>> My girlfriend turns off ekiga, but I still see her online, when I come >>> back I try calling, after restarting ekiga this status is updated. >>> >>> How long it takes to update user status in a normal working case ? Is >>> it a bug or just design ? >> If I remember correctly, when a person quits ekiga, there is no update >> sent on the server. However, the server (or the client) periodically >> (15 min I think) sends info to remote party about the presence. So, >> when a person quits ekiga, it will take at most 15 min to update his >> presence. >> >> Quitting ekiga does not send an update because people wanted that ekiga >> finishes fast. I still think that it is better that ekiga sends an >> update and waits for the answer, even if it takes a 1-3 seconds. The >> proper fix would be to hide that from the user, for ex. when the user >> quits the GUI finishes, but not the program. >> > > Like it was before, but users complained that it did not exit cleanly. > Users generally do not agree between themselves ;-) :o) The best solution is still to hide the GUI, don't you agree? -- Eugen From dsandras at seconix.com Fri Jul 10 10:25:45 2009 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 10 Jul 2009 12:25:45 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <4A571650.6070206@pu-pm.univ-fcomte.fr> References: <4A571447.8020302@pu-pm.univ-fcomte.fr> <1247221116.18172.34.camel@scorpion.multitel.be> <4A571650.6070206@pu-pm.univ-fcomte.fr> Message-ID: <1247221545.18172.35.camel@scorpion.multitel.be> Le vendredi 10 juillet 2009 ? 12:22 +0200, Eugen Dedu a ?crit : > Damien Sandras wrote: > > Le vendredi 10 juillet 2009 ? 12:13 +0200, Eugen Dedu a ?crit : > >> Mateusz Kaduk wrote: > >>> Hi, > >>> > >>> I am on Debian (sid) still using 3.2.1~git20090515. I would like to > >>> know if this issue was fixed in upcomming 3.2.5. > >>> The problem is with contact availability status it gets rarely updated if ever. > >>> > >>> How does ekiga server determinate if user is still online? Are there > >>> any ping-pong requests send ? > >>> My girlfriend turns off ekiga, but I still see her online, when I come > >>> back I try calling, after restarting ekiga this status is updated. > >>> > >>> How long it takes to update user status in a normal working case ? Is > >>> it a bug or just design ? > >> If I remember correctly, when a person quits ekiga, there is no update > >> sent on the server. However, the server (or the client) periodically > >> (15 min I think) sends info to remote party about the presence. So, > >> when a person quits ekiga, it will take at most 15 min to update his > >> presence. > >> > >> Quitting ekiga does not send an update because people wanted that ekiga > >> finishes fast. I still think that it is better that ekiga sends an > >> update and waits for the answer, even if it takes a 1-3 seconds. The > >> proper fix would be to hide that from the user, for ex. when the user > >> quits the GUI finishes, but not the program. > >> > > > > Like it was before, but users complained that it did not exit cleanly. > > Users generally do not agree between themselves ;-) > > :o) > > The best solution is still to hide the GUI, don't you agree? perhaps... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Jim.Diamond at acadiau.ca Fri Jul 10 10:33:01 2009 From: Jim.Diamond at acadiau.ca (Jim Diamond) Date: Fri, 10 Jul 2009 07:33:01 -0300 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <4A571650.6070206@pu-pm.univ-fcomte.fr> References: <4A571447.8020302@pu-pm.univ-fcomte.fr> <1247221116.18172.34.camel@scorpion.multitel.be> <4A571650.6070206@pu-pm.univ-fcomte.fr> Message-ID: <20090710103301.GA25739@jdiamond-nb> On Fri, Jul 10, 2009 at 12:22 (+0200), Eugen Dedu wrote: > Damien Sandras wrote: >> Le vendredi 10 juillet 2009 ? 12:13 +0200, Eugen Dedu a ?crit : >>> Mateusz Kaduk wrote: >>>> Hi, >>>> I am on Debian (sid) still using 3.2.1~git20090515. I would like to >>>> know if this issue was fixed in upcomming 3.2.5. >>>> The problem is with contact availability status it gets rarely updated if ever. >>>> How does ekiga server determinate if user is still online? Are there >>>> any ping-pong requests send ? >>>> My girlfriend turns off ekiga, but I still see her online, when I come >>>> back I try calling, after restarting ekiga this status is updated. >>>> How long it takes to update user status in a normal working case ? Is >>>> it a bug or just design ? >>> If I remember correctly, when a person quits ekiga, there is no update >>> sent on the server. However, the server (or the client) periodically >>> (15 min I think) sends info to remote party about the presence. So, >>> when a person quits ekiga, it will take at most 15 min to update his >>> presence. >>> Quitting ekiga does not send an update because people wanted that >>> ekiga finishes fast. I still think that it is better that ekiga sends >>> an update and waits for the answer, even if it takes a 1-3 seconds. >>> The proper fix would be to hide that from the user, for ex. when the >>> user quits the GUI finishes, but not the program. >> Like it was before, but users complained that it did not exit cleanly. >> Users generally do not agree between themselves ;-) > :o) > The best solution is still to hide the GUI, don't you agree? Speaking as a user who used to wonder if gnomemeeting was *ever* going to go away (note I mean gnomemeeting, not ekiga), I was interested to see the "1-3 seconds" comment. I agree that having the gui vanish, and possibly having the program fork() itself into the background (in case someone started it from a shell and expects to see a new prompt at some point) would be a Good Thing. I used to assume that the reason for gnomemeeting taking forever was because of some idle and tedious chit-chat with gconfd. Certainly, I waited way, way, way longer for gnomemeeting to finish than 1-3 seconds, and when I first compiled ekiga w/o gnome support, I was pleased to see it quit more or less as soon as I asked it to quit. While ekiga != gnomemeeting, I am wondering if some of the time to finish is actually ekiga and gconfd having long talks about something. Cheers. Jim From mateusz.kaduk at gmail.com Fri Jul 10 11:39:34 2009 From: mateusz.kaduk at gmail.com (Mateusz Kaduk) Date: Fri, 10 Jul 2009 13:39:34 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <20090710103301.GA25739@jdiamond-nb> References: <4A571447.8020302@pu-pm.univ-fcomte.fr> <1247221116.18172.34.camel@scorpion.multitel.be> <4A571650.6070206@pu-pm.univ-fcomte.fr> <20090710103301.GA25739@jdiamond-nb> Message-ID: >>>>. However, the server (or the client) periodically >>>> (15 min I think) sends info to remote party about the presence. ?So, >>>> when a person quits ekiga, it will take at most 15 min to update his >>>> presence. 15min is a long long time comparing to 3s :( If someone wants to terminate program immediately then should use signals. Its pretty annoying to call someone that is doing shopping and not home from 15min. From dsandras at seconix.com Fri Jul 10 11:43:41 2009 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 10 Jul 2009 13:43:41 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: References: <4A571447.8020302@pu-pm.univ-fcomte.fr> <1247221116.18172.34.camel@scorpion.multitel.be> <4A571650.6070206@pu-pm.univ-fcomte.fr> <20090710103301.GA25739@jdiamond-nb> Message-ID: <1247226221.18172.36.camel@scorpion.multitel.be> Le vendredi 10 juillet 2009 ? 13:39 +0200, Mateusz Kaduk a ?crit : > >>>>. However, the server (or the client) periodically > >>>> (15 min I think) sends info to remote party about the presence. So, > >>>> when a person quits ekiga, it will take at most 15 min to update his > >>>> presence. > > 15min is a long long time comparing to 3s :( > If someone wants to terminate program immediately then should use signals. > > Its pretty annoying to call someone that is doing shopping and not > home from 15min. The default on ekiga.net is 5 minutes. If after 5 minutes, you have not renewed your presence publication, you are offline. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Jul 10 11:48:23 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 10 Jul 2009 13:48:23 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <1247226221.18172.36.camel@scorpion.multitel.be> References: <4A571447.8020302@pu-pm.univ-fcomte.fr> <1247221116.18172.34.camel@scorpion.multitel.be> <4A571650.6070206@pu-pm.univ-fcomte.fr> <20090710103301.GA25739@jdiamond-nb> <1247226221.18172.36.camel@scorpion.multitel.be> Message-ID: <4A572A87.90108@pu-pm.univ-fcomte.fr> Damien Sandras wrote: > Le vendredi 10 juillet 2009 ? 13:39 +0200, Mateusz Kaduk a ?crit : >>>>>> . However, the server (or the client) periodically >>>>>> (15 min I think) sends info to remote party about the presence. So, >>>>>> when a person quits ekiga, it will take at most 15 min to update his >>>>>> presence. >> 15min is a long long time comparing to 3s :( >> If someone wants to terminate program immediately then should use signals. >> >> Its pretty annoying to call someone that is doing shopping and not >> home from 15min. > > The default on ekiga.net is 5 minutes. If after 5 minutes, you have not > renewed your presence publication, you are offline. Also, as UDP is used, if the packet is lost, you becomes offline :o) There are a few areas where UDP should be replaced by TCP, we will think about a bit later. -- Eugen From jpuydt at free.fr Fri Jul 10 12:37:55 2009 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 10 Jul 2009 14:37:55 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <1247221116.18172.34.camel@scorpion.multitel.be> References: <4A571447.8020302@pu-pm.univ-fcomte.fr> <1247221116.18172.34.camel@scorpion.multitel.be> Message-ID: <4A573623.4050107@free.fr> Damien Sandras a ?crit : > Le vendredi 10 juillet 2009 ? 12:13 +0200, Eugen Dedu a ?crit : >> Mateusz Kaduk wrote: >>> Hi, >>> >>> I am on Debian (sid) still using 3.2.1~git20090515. I would like to >>> know if this issue was fixed in upcomming 3.2.5. >>> The problem is with contact availability status it gets rarely updated if ever. >>> >>> How does ekiga server determinate if user is still online? Are there >>> any ping-pong requests send ? >>> My girlfriend turns off ekiga, but I still see her online, when I come >>> back I try calling, after restarting ekiga this status is updated. >>> >>> How long it takes to update user status in a normal working case ? Is >>> it a bug or just design ? >> If I remember correctly, when a person quits ekiga, there is no update >> sent on the server. However, the server (or the client) periodically >> (15 min I think) sends info to remote party about the presence. So, >> when a person quits ekiga, it will take at most 15 min to update his >> presence. >> >> Quitting ekiga does not send an update because people wanted that ekiga >> finishes fast. I still think that it is better that ekiga sends an >> update and waits for the answer, even if it takes a 1-3 seconds. The >> proper fix would be to hide that from the user, for ex. when the user >> quits the GUI finishes, but not the program. > > Like it was before, but users complained that it did not exit cleanly. > Users generally do not agree between themselves ;-) What about sending a message to the server "I'm disconnecting"... and *not* wait for any answer? Snark PS: http://bugzilla.gnome.org/show_bug.cgi?id=577526 From Detlef.Lechner at gmx.net Fri Jul 10 12:46:48 2009 From: Detlef.Lechner at gmx.net (Detlef Lechner) Date: Fri, 10 Jul 2009 14:46:48 +0200 Subject: [Ekiga-list] ekiga not "normal" in Juanty and Debian Testing In-Reply-To: References: Message-ID: <1247230008.3796.5.camel@localhost.localdomain> On Thu, 2009-07-09 at 12:08 -0400, H.S. wrote: > 1. During a call, Ekiga appears to hog the CPU (40%~70%). I noticed the same phenomenon. See https://bugs.launchpad.net/ubuntu/+source/ekiga/+bug/395594/?loggingout=1 Regards, Detlef Lechner From geno999 at yahoo.com Fri Jul 10 17:22:27 2009 From: geno999 at yahoo.com (J. Rehbock) Date: Fri, 10 Jul 2009 10:22:27 -0700 (PDT) Subject: [Ekiga-list] Compiling Ekiga 3.2.5 Message-ID: <180372.19145.qm@web33802.mail.mud.yahoo.com> PTLIB compiles without any apparent problem.? However, when I try to configure OPAL, I am told PTLIB cannot be found.? I get the same result in both Fedora 11 and Mandriva 2009.1. I know this stuff is not rocket science, but to a non-coder Ekiga user it is frustrating.? Any step-by-step help would be appreciated. Thanks in advance. geno -------------- next part -------------- An HTML attachment was scrubbed... URL: From andre at bwh.harvard.edu Sat Jul 11 00:27:10 2009 From: andre at bwh.harvard.edu (Andre Robatino) Date: Fri, 10 Jul 2009 20:27:10 -0400 Subject: [Ekiga-list] server down again Message-ID: <4A57DC5E.5010104@bwh.harvard.edu> Down again. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 197 bytes Desc: OpenPGP digital signature URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jul 11 07:12:19 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 11 Jul 2009 09:12:19 +0200 Subject: [Ekiga-list] Compiling Ekiga 3.2.5 In-Reply-To: <180372.19145.qm@web33802.mail.mud.yahoo.com> References: <180372.19145.qm@web33802.mail.mud.yahoo.com> Message-ID: <4A583B53.7070602@pu-pm.univ-fcomte.fr> J. Rehbock wrote: > PTLIB compiles without any apparent problem. However, when I try to configure OPAL, I am told PTLIB cannot be found. I get the same result in both Fedora 11 and Mandriva 2009.1. > > I know this stuff is not rocket science, but to a non-coder Ekiga user it is frustrating. Any step-by-step help would be appreciated. http://wiki.ekiga.org/index.php/Compiling_Ekiga Maybe you have forgot make install. You should tell us how you have installed ptlib and opal. -- Eugen From dsandras at seconix.com Sat Jul 11 08:08:57 2009 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 11 Jul 2009 10:08:57 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A57DC5E.5010104@bwh.harvard.edu> References: <4A57DC5E.5010104@bwh.harvard.edu> Message-ID: <1247299737.4507.0.camel@scorpion.multitel.be> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : > Down again. Somebody is surely having fun crashing it during the night. I'll try to upgrade tomorrow if I have the time. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jul 11 08:25:04 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 11 Jul 2009 10:25:04 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <1247299737.4507.0.camel@scorpion.multitel.be> References: <4A57DC5E.5010104@bwh.harvard.edu> <1247299737.4507.0.camel@scorpion.multitel.be> Message-ID: <4A584C60.4050307@pu-pm.univ-fcomte.fr> Damien Sandras wrote: > Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : >> Down again. > > Somebody is surely having fun crashing it during the night. > > I'll try to upgrade tomorrow if I have the time. I suppose there will be a few user visible changes. It would be wonderful if possible. For info, http://wiki.ekiga.org/index.php/OpenSER_migration -- Eugen From sevmek at free.fr Sat Jul 11 09:08:16 2009 From: sevmek at free.fr (yannick) Date: Sat, 11 Jul 2009 11:08:16 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A584C60.4050307@pu-pm.univ-fcomte.fr> References: <4A57DC5E.5010104@bwh.harvard.edu> <1247299737.4507.0.camel@scorpion.multitel.be> <4A584C60.4050307@pu-pm.univ-fcomte.fr> Message-ID: <4A585680.6020102@free.fr> Eugen Dedu a ?crit : > Damien Sandras wrote: >> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : >>> Down again. >> >> Somebody is surely having fun crashing it during the night. >> >> I'll try to upgrade tomorrow if I have the time. > > I suppose there will be a few user visible changes. It would be > wonderful if possible. For info, > http://wiki.ekiga.org/index.php/OpenSER_migration > Well, this wiki page is outdated. We are using kamailio atm, there is a new web interface already. We still use MySQL. From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jul 11 09:12:54 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 11 Jul 2009 11:12:54 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A585680.6020102@free.fr> References: <4A57DC5E.5010104@bwh.harvard.edu> <1247299737.4507.0.camel@scorpion.multitel.be> <4A584C60.4050307@pu-pm.univ-fcomte.fr> <4A585680.6020102@free.fr> Message-ID: <4A585796.2080000@pu-pm.univ-fcomte.fr> yannick wrote: > Eugen Dedu a ?crit : >> Damien Sandras wrote: >>> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : >>>> Down again. >>> Somebody is surely having fun crashing it during the night. >>> >>> I'll try to upgrade tomorrow if I have the time. >> I suppose there will be a few user visible changes. It would be >> wonderful if possible. For info, >> http://wiki.ekiga.org/index.php/OpenSER_migration >> > > Well, this wiki page is outdated. We are using kamailio atm, there is a > new web interface already. We still use MySQL. Then could you update it or remove it? -- Eugen From sevmek at free.fr Sat Jul 11 09:16:38 2009 From: sevmek at free.fr (yannick) Date: Sat, 11 Jul 2009 11:16:38 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A585796.2080000@pu-pm.univ-fcomte.fr> References: <4A57DC5E.5010104@bwh.harvard.edu> <1247299737.4507.0.camel@scorpion.multitel.be> <4A584C60.4050307@pu-pm.univ-fcomte.fr> <4A585680.6020102@free.fr> <4A585796.2080000@pu-pm.univ-fcomte.fr> Message-ID: <4A585876.2030701@free.fr> Eugen Dedu a ?crit : > yannick wrote: >> Eugen Dedu a ?crit : >>> Damien Sandras wrote: >>>> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : >>>>> Down again. >>>> Somebody is surely having fun crashing it during the night. >>>> >>>> I'll try to upgrade tomorrow if I have the time. >>> I suppose there will be a few user visible changes. It would be >>> wonderful if possible. For info, >>> http://wiki.ekiga.org/index.php/OpenSER_migration >>> >> >> Well, this wiki page is outdated. We are using kamailio atm, there is a >> new web interface already. We still use MySQL. > > Then could you update it or remove it? > I've updated it. We also might remove it... From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jul 11 09:26:02 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 11 Jul 2009 11:26:02 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A585876.2030701@free.fr> References: <4A57DC5E.5010104@bwh.harvard.edu> <1247299737.4507.0.camel@scorpion.multitel.be> <4A584C60.4050307@pu-pm.univ-fcomte.fr> <4A585680.6020102@free.fr> <4A585796.2080000@pu-pm.univ-fcomte.fr> <4A585876.2030701@free.fr> Message-ID: <4A585AAA.5030603@pu-pm.univ-fcomte.fr> yannick wrote: > Eugen Dedu a ?crit : >> yannick wrote: >>> Eugen Dedu a ?crit : >>>> Damien Sandras wrote: >>>>> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : >>>>>> Down again. >>>>> Somebody is surely having fun crashing it during the night. >>>>> >>>>> I'll try to upgrade tomorrow if I have the time. >>>> I suppose there will be a few user visible changes. It would be >>>> wonderful if possible. For info, >>>> http://wiki.ekiga.org/index.php/OpenSER_migration >>>> >>> Well, this wiki page is outdated. We are using kamailio atm, there is a >>> new web interface already. We still use MySQL. >> Then could you update it or remove it? >> > > I've updated it. We also might remove it... The only useful information on the whole page is "it is better to use postgresql". So I think it is better to remove it (if the others agree too). -- Eugen From sevmek at free.fr Sat Jul 11 09:43:39 2009 From: sevmek at free.fr (yannick) Date: Sat, 11 Jul 2009 11:43:39 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A585AAA.5030603@pu-pm.univ-fcomte.fr> References: <4A57DC5E.5010104@bwh.harvard.edu> <1247299737.4507.0.camel@scorpion.multitel.be> <4A584C60.4050307@pu-pm.univ-fcomte.fr> <4A585680.6020102@free.fr> <4A585796.2080000@pu-pm.univ-fcomte.fr> <4A585876.2030701@free.fr> <4A585AAA.5030603@pu-pm.univ-fcomte.fr> Message-ID: <4A585ECB.30607@free.fr> Eugen Dedu a ?crit : > yannick wrote: >> Eugen Dedu a ?crit : >>> yannick wrote: >>>> Eugen Dedu a ?crit : >>>>> Damien Sandras wrote: >>>>>> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : >>>>>>> Down again. >>>>>> Somebody is surely having fun crashing it during the night. >>>>>> >>>>>> I'll try to upgrade tomorrow if I have the time. >>>>> I suppose there will be a few user visible changes. It would be >>>>> wonderful if possible. For info, >>>>> http://wiki.ekiga.org/index.php/OpenSER_migration >>>>> >>>> Well, this wiki page is outdated. We are using kamailio atm, there is a >>>> new web interface already. We still use MySQL. >>> Then could you update it or remove it? >>> >> >> I've updated it. We also might remove it... > > The only useful information on the whole page is "it is better to use > postgresql". So I think it is better to remove it (if the others agree > too). > agreed. Still the main writer for it was TheBonsai. I BCC him. From logic98 at hotmail.com Sat Jul 11 11:31:23 2009 From: logic98 at hotmail.com (sanjay shitole) Date: Sat, 11 Jul 2009 11:31:23 +0000 Subject: [Ekiga-list] help In-Reply-To: References: Message-ID: pl mail ekiga list with regards sss > From: ekiga-list-request at gnome.org > Subject: ekiga-list Digest, Vol 36, Issue 15 > To: ekiga-list at gnome.org > Date: Sat, 11 Jul 2009 09:17:23 +0000 > > Send ekiga-list mailing list submissions to > ekiga-list at gnome.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.gnome.org/mailman/listinfo/ekiga-list > or, via email, send a message with subject or body 'help' to > ekiga-list-request at gnome.org > > You can reach the person managing the list at > ekiga-list-owner at gnome.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ekiga-list digest..." > > > Today's Topics: > > 1. Re: Ekiga contact presence (Julien Puydt) > 2. Re: ekiga not "normal" in Juanty and Debian Testing > (Detlef Lechner) > 3. Compiling Ekiga 3.2.5 (J. Rehbock) > 4. server down again (Andre Robatino) > 5. Re: Compiling Ekiga 3.2.5 (Eugen Dedu) > 6. Re: server down again (Damien Sandras) > 7. Re: server down again (Eugen Dedu) > 8. Re: server down again (yannick) > 9. Re: server down again (Eugen Dedu) > 10. Re: server down again (yannick) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 10 Jul 2009 14:37:55 +0200 > From: Julien Puydt > Subject: Re: [Ekiga-list] Ekiga contact presence > To: Ekiga mailing list > Message-ID: <4A573623.4050107 at free.fr> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Damien Sandras a ?crit : > > Le vendredi 10 juillet 2009 ? 12:13 +0200, Eugen Dedu a ?crit : > >> Mateusz Kaduk wrote: > >>> Hi, > >>> > >>> I am on Debian (sid) still using 3.2.1~git20090515. I would like to > >>> know if this issue was fixed in upcomming 3.2.5. > >>> The problem is with contact availability status it gets rarely updated if ever. > >>> > >>> How does ekiga server determinate if user is still online? Are there > >>> any ping-pong requests send ? > >>> My girlfriend turns off ekiga, but I still see her online, when I come > >>> back I try calling, after restarting ekiga this status is updated. > >>> > >>> How long it takes to update user status in a normal working case ? Is > >>> it a bug or just design ? > >> If I remember correctly, when a person quits ekiga, there is no update > >> sent on the server. However, the server (or the client) periodically > >> (15 min I think) sends info to remote party about the presence. So, > >> when a person quits ekiga, it will take at most 15 min to update his > >> presence. > >> > >> Quitting ekiga does not send an update because people wanted that ekiga > >> finishes fast. I still think that it is better that ekiga sends an > >> update and waits for the answer, even if it takes a 1-3 seconds. The > >> proper fix would be to hide that from the user, for ex. when the user > >> quits the GUI finishes, but not the program. > > > > Like it was before, but users complained that it did not exit cleanly. > > Users generally do not agree between themselves ;-) > > What about sending a message to the server "I'm disconnecting"... and > *not* wait for any answer? > > Snark > > PS: http://bugzilla.gnome.org/show_bug.cgi?id=577526 > > > ------------------------------ > > Message: 2 > Date: Fri, 10 Jul 2009 14:46:48 +0200 > From: Detlef Lechner > Subject: Re: [Ekiga-list] ekiga not "normal" in Juanty and Debian > Testing > To: Ekiga mailing list > Message-ID: <1247230008.3796.5.camel at localhost.localdomain> > Content-Type: text/plain > > On Thu, 2009-07-09 at 12:08 -0400, H.S. wrote: > > > > 1. During a call, Ekiga appears to hog the CPU (40%~70%). > > I noticed the same phenomenon. > See > https://bugs.launchpad.net/ubuntu/+source/ekiga/+bug/395594/?loggingout=1 > > > Regards, > > Detlef Lechner > > > > ------------------------------ > > Message: 3 > Date: Fri, 10 Jul 2009 10:22:27 -0700 (PDT) > From: "J. Rehbock" > Subject: [Ekiga-list] Compiling Ekiga 3.2.5 > To: ekiga-list at gnome.org > Message-ID: <180372.19145.qm at web33802.mail.mud.yahoo.com> > Content-Type: text/plain; charset="iso-8859-1" > > PTLIB compiles without any apparent problem.? However, when I try to configure OPAL, I am told PTLIB cannot be found.? I get the same result in both Fedora 11 and Mandriva 2009.1. > > I know this stuff is not rocket science, but to a non-coder Ekiga user it is frustrating.? Any step-by-step help would be appreciated. > > Thanks in advance. > > geno > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > > ------------------------------ > > Message: 4 > Date: Fri, 10 Jul 2009 20:27:10 -0400 > From: Andre Robatino > Subject: [Ekiga-list] server down again > To: ekiga-list at gnome.org > Message-ID: <4A57DC5E.5010104 at bwh.harvard.edu> > Content-Type: text/plain; charset="iso-8859-1" > > Down again. > > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: signature.asc > Type: application/pgp-signature > Size: 197 bytes > Desc: OpenPGP digital signature > URL: > > ------------------------------ > > Message: 5 > Date: Sat, 11 Jul 2009 09:12:19 +0200 > From: Eugen Dedu > Subject: Re: [Ekiga-list] Compiling Ekiga 3.2.5 > To: Ekiga mailing list > Message-ID: <4A583B53.7070602 at pu-pm.univ-fcomte.fr> > Content-Type: text/plain; charset=UTF-8; format=flowed > > J. Rehbock wrote: > > PTLIB compiles without any apparent problem. However, when I try to configure OPAL, I am told PTLIB cannot be found. I get the same result in both Fedora 11 and Mandriva 2009.1. > > > > I know this stuff is not rocket science, but to a non-coder Ekiga user it is frustrating. Any step-by-step help would be appreciated. > > http://wiki.ekiga.org/index.php/Compiling_Ekiga > > Maybe you have forgot make install. > > You should tell us how you have installed ptlib and opal. > > -- > Eugen > > > ------------------------------ > > Message: 6 > Date: Sat, 11 Jul 2009 10:08:57 +0200 > From: Damien Sandras > Subject: Re: [Ekiga-list] server down again > To: Ekiga mailing list > Message-ID: <1247299737.4507.0.camel at scorpion.multitel.be> > Content-Type: text/plain; charset="UTF-8" > > Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : > > Down again. > > Somebody is surely having fun crashing it during the night. > > I'll try to upgrade tomorrow if I have the time. > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ Be IP : http://www.beip.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > > > ------------------------------ > > Message: 7 > Date: Sat, 11 Jul 2009 10:25:04 +0200 > From: Eugen Dedu > Subject: Re: [Ekiga-list] server down again > To: Ekiga mailing list > Message-ID: <4A584C60.4050307 at pu-pm.univ-fcomte.fr> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Damien Sandras wrote: > > Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : > >> Down again. > > > > Somebody is surely having fun crashing it during the night. > > > > I'll try to upgrade tomorrow if I have the time. > > I suppose there will be a few user visible changes. It would be > wonderful if possible. For info, > http://wiki.ekiga.org/index.php/OpenSER_migration > > -- > Eugen > > > ------------------------------ > > Message: 8 > Date: Sat, 11 Jul 2009 11:08:16 +0200 > From: yannick > Subject: Re: [Ekiga-list] server down again > To: Ekiga mailing list > Message-ID: <4A585680.6020102 at free.fr> > Content-Type: text/plain; charset=UTF-8 > > Eugen Dedu a ?crit : > > Damien Sandras wrote: > >> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : > >>> Down again. > >> > >> Somebody is surely having fun crashing it during the night. > >> > >> I'll try to upgrade tomorrow if I have the time. > > > > I suppose there will be a few user visible changes. It would be > > wonderful if possible. For info, > > http://wiki.ekiga.org/index.php/OpenSER_migration > > > > Well, this wiki page is outdated. We are using kamailio atm, there is a > new web interface already. We still use MySQL. > > > ------------------------------ > > Message: 9 > Date: Sat, 11 Jul 2009 11:12:54 +0200 > From: Eugen Dedu > Subject: Re: [Ekiga-list] server down again > To: sevmek at free.fr, Ekiga mailing list > Message-ID: <4A585796.2080000 at pu-pm.univ-fcomte.fr> > Content-Type: text/plain; charset=UTF-8; format=flowed > > yannick wrote: > > Eugen Dedu a ?crit : > >> Damien Sandras wrote: > >>> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : > >>>> Down again. > >>> Somebody is surely having fun crashing it during the night. > >>> > >>> I'll try to upgrade tomorrow if I have the time. > >> I suppose there will be a few user visible changes. It would be > >> wonderful if possible. For info, > >> http://wiki.ekiga.org/index.php/OpenSER_migration > >> > > > > Well, this wiki page is outdated. We are using kamailio atm, there is a > > new web interface already. We still use MySQL. > > Then could you update it or remove it? > > -- > Eugen > > > ------------------------------ > > Message: 10 > Date: Sat, 11 Jul 2009 11:16:38 +0200 > From: yannick > Subject: Re: [Ekiga-list] server down again > Cc: Ekiga mailing list > Message-ID: <4A585876.2030701 at free.fr> > Content-Type: text/plain; charset=UTF-8 > > Eugen Dedu a ?crit : > > yannick wrote: > >> Eugen Dedu a ?crit : > >>> Damien Sandras wrote: > >>>> Le vendredi 10 juillet 2009 ? 20:27 -0400, Andre Robatino a ?crit : > >>>>> Down again. > >>>> Somebody is surely having fun crashing it during the night. > >>>> > >>>> I'll try to upgrade tomorrow if I have the time. > >>> I suppose there will be a few user visible changes. It would be > >>> wonderful if possible. For info, > >>> http://wiki.ekiga.org/index.php/OpenSER_migration > >>> > >> > >> Well, this wiki page is outdated. We are using kamailio atm, there is a > >> new web interface already. We still use MySQL. > > > > Then could you update it or remove it? > > > > I've updated it. We also might remove it... > > > ------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > End of ekiga-list Digest, Vol 36, Issue 15 > ****************************************** _________________________________________________________________ Live Search extreme As India feels the heat of poll season, get all the info you need on the MSN News Aggregator http://news.in.msn.com/National/indiaelections2009/aggregator/default.aspx -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sat Jul 11 11:44:31 2009 From: sevmek at free.fr (yannick) Date: Sat, 11 Jul 2009 13:44:31 +0200 Subject: [Ekiga-list] help In-Reply-To: References: Message-ID: <4A587B1F.5020406@free.fr> sanjay shitole a ?crit : > > pl mail ekiga list > > with regards > sss > I do not understand what you want... From geno999 at yahoo.com Sat Jul 11 16:28:30 2009 From: geno999 at yahoo.com (J. Rehbock) Date: Sat, 11 Jul 2009 09:28:30 -0700 (PDT) Subject: [Ekiga-list] Compiling Ekiga 3.2.5 Message-ID: <726775.41366.qm@web33804.mail.mud.yahoo.com> Using the '--prefix=/usr' language with each configure command, as specified in your wiki, makes all go well.? Thank you. geno --- On Sat, 7/11/09, Eugen Dedu wrote: From: Eugen Dedu Subject: Re: [Ekiga-list] Compiling Ekiga 3.2.5 To: "Ekiga mailing list" Date: Saturday, July 11, 2009, 3:12 AM J. Rehbock wrote: > PTLIB compiles without any apparent problem.? However, when I try to configure OPAL, I am told PTLIB cannot be found.? I get the same result in both Fedora 11 and Mandriva 2009.1. > > I know this stuff is not rocket science, but to a non-coder Ekiga user it is frustrating.? Any step-by-step help would be appreciated. http://wiki.ekiga.org/index.php/Compiling_Ekiga Maybe you have forgot make install. You should tell us how you have installed ptlib and opal. -- Eugen _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From palos at post.sk Sat Jul 11 17:56:37 2009 From: palos at post.sk (Palo S.) Date: 11 Jul 2009 19:56:37 +0200 (CEST) Subject: [Ekiga-list] Ekiga contact presence Message-ID: <4A58D255.000001.03625@kamasutra> > >>> My girlfriend turns off ekiga, but I still see her online, when I come > >>> back I try calling, after restarting ekiga this status is updated. I can confirm the problem and it behaves like this on 4 different computers in 4 different networks (everywhere where I tried it) : If the other side connects, the status updates quickly, if the other side quits, the status _never_ gets updated. If I leave the client up for several days then I end up with all my contacts permanently green. I had this behaviour from the very first Ekiga 3.0 that I installed. > >> If I remember correctly, when a person quits ekiga, there is no update > >> sent on the server. However, the server (or the client) periodically > >> (15 min I think) sends info to remote party about the presence. So, > >> when a person quits ekiga, it will take at most 15 min to update his > >> presence. Interesting. I would assume that this could occasionaly cause the opposite problem (ie not showing online status when contact is online). But I cannot see how it can actually happen that the client never gets the offline status of the contact if the \"default\" behaviour (ie when no message is delivered to the server within 15 minutes) is offline status and if the communication between the server and client is clearly there (eg new contacts getting online become green). I suspect a bug. > What about sending a message to the server \"I\'m disconnecting\"... and > *not* wait for any answer? The same thing came to my mind after reading the previous messages in this thread. I imagine that it could be quick and safe to implement. Palo __________ Najpopul?rnej?? blog na Slovensku - http://blog.sme.sk/ From dbareiro at gmail.com Sat Jul 11 22:40:45 2009 From: dbareiro at gmail.com (DaniB) Date: Sat, 11 Jul 2009 15:40:45 -0700 (PDT) Subject: [Ekiga-list] About the services provided by Ekiga.net Message-ID: <24443100.post@talk.nabble.com> Hi all! At the moment I'm using the Twinkle VoIP client and although it supports [SZ]RTP encryption, I would like to know if to obtain a safe communication with the other parts it is necessary that this other part (client) also has supported the same encryption protocol or if some support of the Ekiga.net network is necessary additionally. Also I would want to consult a doubt about the use of the conference rooms. According to what I was reading ([1], [2]), one can enter in a room xxxx communicating to sip: 501xxxx at ekiga.net and, if I understood well, to the being first who enter would have to listen to the option to specify a PIN to the room to offer a protected access. But in all the tests that I did I, I didn't listen to any request of PIN (followed optionally of # so that the room is public). I don't believe either that all the rooms which I tried to enter were occupied. I'm not very sure about how Asterisk will handle the conference rooms (I assume that are using Asterisk in ekiga.net). Would I have to receive some acoustic notification of the participants of the conference in case somebody were in the room? Thanks in advance for your reply. Regards, Daniel [1] http://wiki.ekiga.org/index.php/Fun_Numbers [2] https://www.ekiga.net/index.php?page=services -- View this message in context: http://www.nabble.com/About-the-services-provided-by-Ekiga.net-tp24443100p24443100.html Sent from the Ekiga General mailing list archive at Nabble.com. From andre at bwh.harvard.edu Sat Jul 11 22:41:07 2009 From: andre at bwh.harvard.edu (Andre Robatino) Date: Sat, 11 Jul 2009 18:41:07 -0400 Subject: [Ekiga-list] server down again Message-ID: <4A591503.3040109@bwh.harvard.edu> Down again. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 197 bytes Desc: OpenPGP digital signature URL: From sevmek at free.fr Sat Jul 11 23:13:49 2009 From: sevmek at free.fr (yannick) Date: Sun, 12 Jul 2009 01:13:49 +0200 Subject: [Ekiga-list] About the services provided by Ekiga.net In-Reply-To: <24443100.post@talk.nabble.com> References: <24443100.post@talk.nabble.com> Message-ID: <4A591CAD.1090902@free.fr> DaniB a ?crit : > Hi all! > > At the moment I'm using the Twinkle VoIP client and although it supports > [SZ]RTP encryption, I would like to know if to obtain a safe communication > with the other parts it is necessary that this other part (client) also has > supported the same encryption protocol or if some support of the Ekiga.net > network is necessary additionally. > Ekiga do not support ZRTP yet, thus it wont work out of the box. Maybe if you use ekiga+zphone it will work. Ekiga.net do not support ZRTP and AFAIK it do not need to do so. AFAIK ZRTP is direct between clients and do not involve the server. From dsandras at seconix.com Sun Jul 12 09:10:52 2009 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 12 Jul 2009 11:10:52 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A591503.3040109@bwh.harvard.edu> References: <4A591503.3040109@bwh.harvard.edu> Message-ID: <1247389852.4507.44.camel@scorpion.multitel.be> Le samedi 11 juillet 2009 ? 18:41 -0400, Andre Robatino a ?crit : > Down again. Restarted. As I said, somebody is having fun during the night and crashes it. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sun Jul 12 09:13:04 2009 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 12 Jul 2009 11:13:04 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <4A58D255.000001.03625@kamasutra> References: <4A58D255.000001.03625@kamasutra> Message-ID: <1247389984.4507.46.camel@scorpion.multitel.be> Le samedi 11 juillet 2009 ? 19:56 +0200, Palo S. a ?crit : > > >>> My girlfriend turns off ekiga, but I still see her online, when I come > > >>> back I try calling, after restarting ekiga this status is updated. > > I can confirm the problem and it behaves like this on 4 > different computers in 4 different networks (everywhere > where I tried it) : If the other side connects, the status > updates quickly, if the other side quits, the status > _never_ gets updated. If I leave the client up for several > days then I end up with all my contacts permanently green. > I had this behaviour from the very first Ekiga 3.0 that > I installed. > Perhaps teh server does not indicate to the client that the user is offline. I'll test it later. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From mrickma at gwdg.de Sun Jul 12 11:58:58 2009 From: mrickma at gwdg.de (Michael Rickmann) Date: Sun, 12 Jul 2009 13:58:58 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <1247389852.4507.44.camel@scorpion.multitel.be> References: <4A591503.3040109@bwh.harvard.edu> <1247389852.4507.44.camel@scorpion.multitel.be> Message-ID: <4A59D002.3030003@gwdg.de> Damien Sandras schrieb: > Le samedi 11 juillet 2009 ? 18:41 -0400, Andre Robatino a ?crit : >> Down again. > > Restarted. > > As I said, somebody is having fun during the night and crashes it. I am not quite shure that it is not me. I am trying to find a bug of Win32 Ekiga. It seems opal/ptlib related and is unfortunately also in the versions needed for Ekiga 3.2.5. Instead of opening the audio device when a call has been established to 500 at ekiga.net, windows are piling up and render XP or Win7 rather unusable. Surprisingly this does not happen when connecting to a local Ekiga 2.0.10 by direct IP. So I have to kill Ekiga before Windows gets stuck. Please keep starting ekiga.net so that I can continue bisecting ptlib/opal. Michael From dsandras at seconix.com Sun Jul 12 12:47:00 2009 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 12 Jul 2009 14:47:00 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A59D002.3030003@gwdg.de> References: <4A591503.3040109@bwh.harvard.edu> <1247389852.4507.44.camel@scorpion.multitel.be> <4A59D002.3030003@gwdg.de> Message-ID: <1247402820.4507.76.camel@scorpion.multitel.be> Le dimanche 12 juillet 2009 ? 13:58 +0200, Michael Rickmann a ?crit : > Damien Sandras schrieb: > > Le samedi 11 juillet 2009 ? 18:41 -0400, Andre Robatino a ?crit : > >> Down again. > > > > Restarted. > > > > As I said, somebody is having fun during the night and crashes it. > I am not quite shure that it is not me. I am trying to find a bug of > Win32 Ekiga. It seems opal/ptlib related and is unfortunately also in > the versions needed for Ekiga 3.2.5. Instead of opening the audio device > when a call has been established to 500 at ekiga.net, windows are piling up > and render XP or Win7 rather unusable. Surprisingly this does not happen > when connecting to a local Ekiga 2.0.10 by direct IP. So I have to kill > Ekiga before Windows gets stuck. Please keep starting ekiga.net so that > I can continue bisecting ptlib/opal. I have put a script. It should not go down anymore. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From madhava.chirukuri at gmail.com Mon Jul 13 11:32:05 2009 From: madhava.chirukuri at gmail.com (Madhava Chirukuri) Date: Mon, 13 Jul 2009 17:02:05 +0530 Subject: [Ekiga-list] Ekiga 3.1.0 segfaults on Beagleboard Message-ID: <419a593f0907130432k5ad16d4m8ca4da4f5714a1aa@mail.gmail.com> HI Sandras, Please go through my observation of ekiga 3.1.0 on beagle board, Please provide your input on Ekiga I tried to use Ekiga-3.1.0,opal_3.5.2 and ptlib_2.5.2 on my beagleboard with building the Ekiga from openembedded and installing the necessary dependencies manually. I have following observations. 1.Ekiga gets launched and i have configured using configuration assistant. 2. after setting as Connection type as LAN Audio driver omap-beagleboard ALSA driver 3.Ekiga detected the Logitech Camera also.I am able to see the local video. 4. I am unable to initialize the chat from the board. But if someone else initialises chat to the board through ekiga, I am able to reply to the messages and able to chat in duples mode. 5. I am able to successfully do the Echo test (500 at ekiga.net).Successfully call to Conference room also. 6. But When call is received on the Beagleboard from another user ekiga sip id, wether accept or reject it is showing segmentation fault and Ekiga window is getting closed. I need help on this Can someone let me know, what would be the problem here? Is ekiga 3.1.0 is stable or it requires some patch to work? the libraries versions mentioned above opal_3.5.2 and ptlib_2.5.2 will work fine with ekiga 3.1.0? Thanks and regards, Madhava -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Jul 13 11:42:52 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 13 Jul 2009 13:42:52 +0200 Subject: [Ekiga-list] Ekiga 3.1.0 segfaults on Beagleboard In-Reply-To: <419a593f0907130432k5ad16d4m8ca4da4f5714a1aa@mail.gmail.com> References: <419a593f0907130432k5ad16d4m8ca4da4f5714a1aa@mail.gmail.com> Message-ID: <4A5B1DBC.9040206@pu-pm.univ-fcomte.fr> You should install the 3.2.5 version, see http://wiki.ekiga.org/index.php/Download_Ekiga_sources It's very probable that your crash is fixed there. Madhava Chirukuri wrote: > HI Sandras, > > Please go through my observation of ekiga 3.1.0 on beagle board, Please > provide your input on Ekiga > > I tried to use Ekiga-3.1.0,opal_3.5.2 and ptlib_2.5.2 on my > beagleboard with building the Ekiga from > openembedded and installing the necessary dependencies manually. > > > I have following observations. > > 1.Ekiga gets launched and i have configured using configuration assistant. > 2. after setting as > Connection type as LAN > Audio driver omap-beagleboard ALSA driver > 3.Ekiga detected the Logitech Camera also.I am able to see the local video. > 4. I am unable to initialize the chat from the board. But if someone > else initialises chat to the board through ekiga, I am able to reply > to the messages and able to chat in duples mode. > 5. I am able to successfully do the Echo test > (500 at ekiga.net).Successfully call to Conference room also. > > 6. But When call is received on the Beagleboard from another user > ekiga sip id, wether accept or reject it is showing > segmentation fault and Ekiga window is getting closed. > > I need help on this > Can someone let me know, what would be the problem here? > Is ekiga 3.1.0 is stable or it requires some patch to work? > the libraries versions mentioned above opal_3.5.2 and ptlib_2.5.2 will > work fine with ekiga 3.1.0? > > > Thanks and regards, > Madhava > > > > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From bnykjo at yahoo.com Tue Jul 14 15:02:26 2009 From: bnykjo at yahoo.com (Bny Jo) Date: Tue, 14 Jul 2009 08:02:26 -0700 (PDT) Subject: [Ekiga-list] Google Voice Ekiga Gizmo5 Message-ID: <600474.66796.qm@web111806.mail.gq1.yahoo.com> I have setup an GV account to work with Gizmo5 and then forwarding all calls to Ekiga. I able to send and recieve calls but the call drops after 15 seconds every time. I forwarded the port on my wireless router. Still having trouble. My debug log attached. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: debug.tar.gz Type: application/x-gzip Size: 23965 bytes Desc: not available URL: From sevmek at free.fr Tue Jul 14 16:12:25 2009 From: sevmek at free.fr (yannick) Date: Tue, 14 Jul 2009 18:12:25 +0200 Subject: [Ekiga-list] Google Voice Ekiga Gizmo5 In-Reply-To: <600474.66796.qm@web111806.mail.gq1.yahoo.com> References: <600474.66796.qm@web111806.mail.gq1.yahoo.com> Message-ID: <4A5CAE69.6000200@free.fr> Bny Jo a ?crit : > I have setup an GV account to work with Gizmo5 and then forwarding all calls to Ekiga. I able to send and recieve calls but the call drops after 15 seconds every time. I forwarded the port on my wireless router. Still having trouble. My debug log attached. > > I saw some errors when trying to open audio device, but it seems the call works (you can speak and hear for 15s). Thus it seems irrelevent here. IMHO the weird part is here: line 3734 2009/07/13 21:59:12.387 4:37.724 Media Patch:0x542d0950 RTP Session 1, transmit statistics: packets=801 octets=128160 avgTime=20 maxTime=73 minTime=0 2009/07/13 21:59:12.744 4:38.081 RTP Jitter:0x5428f950 RTP Session 1, receive statistics: packets=801 octets=128160 lost=0 tooLate=0 order=0 avgTime=20 maxTime=26 minTime=15 jitter=29554 maxJitter=33554431 2009/07/13 21:59:13.187 4:38.524 Housekeeper:0x65a01950 SIP Starting PUBLISH for offline retry 2009/07/13 21:59:13.187 4:38.524 Housekeeper:0x65a01950 SIP Changing PUBLISH handler from Unavailable to Restoring, target=sip:icehanger at proxy01.sipphone.com, id=627530ba-8f6e-de11-951c-00238b64ae25 at secureus I did not find any regular SIP message for ending the call, nor any statistics about the call one usually find in the log. Is this a bug in the publish system which hang up the call? From sevmek at free.fr Tue Jul 14 16:12:53 2009 From: sevmek at free.fr (yannick) Date: Tue, 14 Jul 2009 18:12:53 +0200 Subject: [Ekiga-list] Google Voice Ekiga Gizmo5 In-Reply-To: <600474.66796.qm@web111806.mail.gq1.yahoo.com> References: <600474.66796.qm@web111806.mail.gq1.yahoo.com> Message-ID: <4A5CAE85.3050901@free.fr> Bny Jo a ?crit : > I have setup an GV account to work with Gizmo5 and then forwarding all calls to Ekiga. I able to send and recieve calls but the call drops after 15 seconds every time. I forwarded the port on my wireless router. Still having trouble. My debug log attached. > > I saw some errors when trying to open audio device, but it seems the call works (you can speak and hear for 15s). Thus it seems irrelevent here. IMHO the weird part is here: line 3734 2009/07/13 21:59:12.387 4:37.724 Media Patch:0x542d0950 RTP Session 1, transmit statistics: packets=801 octets=128160 avgTime=20 maxTime=73 minTime=0 2009/07/13 21:59:12.744 4:38.081 RTP Jitter:0x5428f950 RTP Session 1, receive statistics: packets=801 octets=128160 lost=0 tooLate=0 order=0 avgTime=20 maxTime=26 minTime=15 jitter=29554 maxJitter=33554431 2009/07/13 21:59:13.187 4:38.524 Housekeeper:0x65a01950 SIP Starting PUBLISH for offline retry 2009/07/13 21:59:13.187 4:38.524 Housekeeper:0x65a01950 SIP Changing PUBLISH handler from Unavailable to Restoring, target=sip:icehanger at proxy01.sipphone.com, id=627530ba-8f6e-de11-951c-00238b64ae25 at secureus I did not find any regular SIP message for ending the call, nor any statistics about the call one usually find in the log. From dixonpete at gmail.com Tue Jul 14 18:22:27 2009 From: dixonpete at gmail.com (Pete Dixon) Date: Tue, 14 Jul 2009 14:22:27 -0400 Subject: [Ekiga-list] Ekiga freezing on start-up Message-ID: Hi guys, this is my first post to the list. I'm trying to set up Ekiga. I've made a few calls semi-successfully last week and am back again trying with a new headset and knowledge of aumix to better control the volume. I'm using PCLinuxOS 09. I've bought a Diamond subscription and my calls last week were long distance so I have or had that part right. I think my issue is getting the IDs right in the configuration assistant. The issue is Ekiga is freezing permanently after finishing the assistant. I assume I'm entering the wrong information but I can't figure out what. I believe my user name is: dixonpete. The password is clearly indicated from the Ekiga password reminder email. The Diamond card info seems to be clearly indicated as well: Account Information Signup date :30.06.2009 Account Id :*xxxxxxx* PIN code :*xxxxxxxxxxx* What am I missing? Pete -- A computer consultant advocating Windows is like a doctor prescribing cigarettes. It creates a lot of extra work. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 14 19:35:33 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 14 Jul 2009 21:35:33 +0200 Subject: [Ekiga-list] Ekiga freezing on start-up In-Reply-To: References: Message-ID: <4A5CDE05.2090002@pu-pm.univ-fcomte.fr> There was such a bug (freeze at end of assistant) fixed in 3.2.5 or 3.2.4, could you use the 3.2.5 version? Eugen Pete Dixon wrote: > Hi guys, this is my first post to the list. > > I'm trying to set up Ekiga. I've made a few calls semi-successfully last > week and am back again trying with a new headset and knowledge of aumix to > better control the volume. I'm using PCLinuxOS 09. > > I've bought a Diamond subscription and my calls last week were long distance > so I have or had that part right. > > I think my issue is getting the IDs right in the configuration assistant. > The issue is Ekiga is freezing permanently after finishing the assistant. I > assume I'm entering the wrong information but I can't figure out what. > > I believe my user name is: dixonpete. The password is clearly indicated from > the Ekiga password reminder email. > > The Diamond card info seems to be clearly indicated as well: > > Account Information Signup date :30.06.2009 Account Id :*xxxxxxx* PIN > code :*xxxxxxxxxxx* > > > > > What am I missing? > > Pete > > > > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From dixonpete at gmail.com Tue Jul 14 19:55:52 2009 From: dixonpete at gmail.com (Pete Dixon) Date: Tue, 14 Jul 2009 15:55:52 -0400 Subject: [Ekiga-list] Ekiga freezing on start-up In-Reply-To: <4A5CDE05.2090002@pu-pm.univ-fcomte.fr> References: <4A5CDE05.2090002@pu-pm.univ-fcomte.fr> Message-ID: I checked About, I'm using 3.2.5. My previous issue was with volume of listening and the mic. I think I've resolved those. The lock up is happening every time now. I had a look at the accounts to see if I could fix the problem without the Assistant. Turned out every time I had used it it had created another pair of accounts, some with incorrect entries from previous attempts. I deleted all but the two and corrected their entries and was able to register with both Ekiga and Diamondcard. I called a friend's phone and was able to hear him almost perfectly but my voice was nearly unrecognizable. This is with a modern Logitech headset that I just brought hom. Any suggestions on that front? I tried manipulating the Aumix settings, no dice. I wasn't any more audible last week with older headsets or mics so I don't think it's the headset. Pete Pete On Tue, Jul 14, 2009 at 3:35 PM, Eugen Dedu wrote: > There was such a bug (freeze at end of assistant) fixed in 3.2.5 or 3.2.4, > could you use the 3.2.5 version? > > Eugen > > Pete Dixon wrote: > >> Hi guys, this is my first post to the list. >> >> I'm trying to set up Ekiga. I've made a few calls semi-successfully last >> week and am back again trying with a new headset and knowledge of aumix to >> better control the volume. I'm using PCLinuxOS 09. >> >> I've bought a Diamond subscription and my calls last week were long >> distance >> so I have or had that part right. >> >> I think my issue is getting the IDs right in the configuration assistant. >> The issue is Ekiga is freezing permanently after finishing the assistant. >> I >> assume I'm entering the wrong information but I can't figure out what. >> >> I believe my user name is: dixonpete. The password is clearly indicated >> from >> the Ekiga password reminder email. >> >> The Diamond card info seems to be clearly indicated as well: >> >> Account Information Signup date :30.06.2009 Account Id :*xxxxxxx* PIN >> code :*xxxxxxxxxxx* >> >> >> >> >> What am I missing? >> >> Pete >> >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- A computer consultant advocating Windows is like a doctor prescribing cigarettes. It creates a lot of extra work. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 14 20:15:56 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 14 Jul 2009 22:15:56 +0200 Subject: [Ekiga-list] Ekiga freezing on start-up In-Reply-To: References: <4A5CDE05.2090002@pu-pm.univ-fcomte.fr> Message-ID: <4A5CE77C.4020302@pu-pm.univ-fcomte.fr> Pete Dixon wrote: > I checked About, I'm using 3.2.5. > > My previous issue was with volume of listening and the mic. I think I've > resolved those. The lock up is happening every time now. Could you send us the gdb backtrace, cf. http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_stack_backtrace_from_a_crash ? > I had a look at the accounts to see if I could fix the problem without the > Assistant. Turned out every time I had used it it had created another pair > of accounts, some with incorrect entries from previous attempts. I deleted In order to understand the problem you need to tell us what you fill in the assistant (except the password). > all but the two and corrected their entries and was able to register with > both Ekiga and Diamondcard. Ok! > I called a friend's phone and was able to hear him almost perfectly but my > voice was nearly unrecognizable. This is with a modern Logitech headset that > I just brought hom. Any suggestions on that front? I tried manipulating the > Aumix settings, no dice. I wasn't any more audible last week with older > headsets or mics so I don't think it's the headset. I have no idea :o( Is the echo the problem or is it another thing? > Pete > > > > Pete > > On Tue, Jul 14, 2009 at 3:35 PM, Eugen Dedu > wrote: > >> There was such a bug (freeze at end of assistant) fixed in 3.2.5 or 3.2.4, >> could you use the 3.2.5 version? >> >> Eugen >> >> Pete Dixon wrote: >> >>> Hi guys, this is my first post to the list. >>> >>> I'm trying to set up Ekiga. I've made a few calls semi-successfully last >>> week and am back again trying with a new headset and knowledge of aumix to >>> better control the volume. I'm using PCLinuxOS 09. >>> >>> I've bought a Diamond subscription and my calls last week were long >>> distance >>> so I have or had that part right. >>> >>> I think my issue is getting the IDs right in the configuration assistant. >>> The issue is Ekiga is freezing permanently after finishing the assistant. >>> I >>> assume I'm entering the wrong information but I can't figure out what. >>> >>> I believe my user name is: dixonpete. The password is clearly indicated >>> from >>> the Ekiga password reminder email. >>> >>> The Diamond card info seems to be clearly indicated as well: >>> >>> Account Information Signup date :30.06.2009 Account Id :*xxxxxxx* PIN >>> code :*xxxxxxxxxxx* >>> >>> >>> >>> >>> What am I missing? From dixonpete at gmail.com Tue Jul 14 21:17:23 2009 From: dixonpete at gmail.com (Pete Dixon) Date: Tue, 14 Jul 2009 17:17:23 -0400 Subject: [Ekiga-list] Ekiga freezing on start-up In-Reply-To: <4A5CE77C.4020302@pu-pm.univ-fcomte.fr> References: <4A5CDE05.2090002@pu-pm.univ-fcomte.fr> <4A5CE77C.4020302@pu-pm.univ-fcomte.fr> Message-ID: > > Could you send us the gdb backtrace, cf. > http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_stack_backtrace_from_a_crash? You know, I tried! I was able to follow the instructions re debugging but now when I deliberately make errors with the account information I can't get it to freeze. Go figure. Definitely part of the issue was I didn't understand that the Assistant was duplicating the accounts each time it was run. I was putting in the correct information but the system was still using the older, incorrect entries. The freezing? Maybe I put something bad in like the SIP address instead of my Ekiga username. I've made a few long distance calls successfully now. The call quality is fair to poor though. I'll keep on experimenting with the settings. I think the issue before was the MIC was set far too high blasting the callee with static. I also can't yet receive calls yet on the Toronto number I purchased. Big progress tho. Tx! Pete -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 14 21:21:26 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 14 Jul 2009 23:21:26 +0200 Subject: [Ekiga-list] Ekiga freezing on start-up In-Reply-To: References: <4A5CDE05.2090002@pu-pm.univ-fcomte.fr> <4A5CE77C.4020302@pu-pm.univ-fcomte.fr> Message-ID: <4A5CF6D6.60905@pu-pm.univ-fcomte.fr> Pete Dixon wrote: >> Could you send us the gdb backtrace, cf. >> http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_stack_backtrace_from_a_crash? > > > You know, I tried! I was able to follow the instructions re debugging but > now when I deliberately make errors with the account information I can't get > it to freeze. Go figure. > > Definitely part of the issue was I didn't understand that the Assistant was > duplicating the accounts each time it was run. I was putting in the correct > information but the system was still using the older, incorrect entries. The Tell us how the duplicated entries appear, what do you type in the assistant. We could fix that (if it's a bug). > freezing? Maybe I put something bad in like the SIP address instead of my > Ekiga username. > > I've made a few long distance calls successfully now. The call quality is > fair to poor though. I'll keep on experimenting with the settings. I think > the issue before was the MIC was set far too high blasting the callee with > static. I also can't yet receive calls yet on the Toronto number I > purchased. > > Big progress tho. Tx! From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 14 21:30:50 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 14 Jul 2009 23:30:50 +0200 Subject: [Ekiga-list] (no subject) In-Reply-To: <49FE25F6.5030404@gmail.com> References: <49FE25F6.5030404@gmail.com> Message-ID: <4A5CF90A.5040400@pu-pm.univ-fcomte.fr> Cameron K Denton wrote: > Help! I recently did i fresh install of Ubuntu 9.04 and ekiga either > 1.closes when I attempt to make a call with call button or > 2.when I call for an echo test(double clicking it) it calls and > immediately hangs up or connects with no sound. > > here it is ran -d 1 > 3.2.0 by on Unix Linux (2.6.30-020630rc2-generic-i686) with PTLib > (v2.6.1) at 2009/5/4 3:33:52.130 > 2009/05/04 03:33:52.131 0:00.103 > Ekiga SVN revision: unknown > 2009/05/04 03:33:52.300 0:00.272 > HalManager_dbusPopulating full interface list failed - Method > "getDevices" with signature "" on interface > "org.freedesktop.NetworkManager" doesn't exist > > 2009/05/04 03:33:52.301 0:00.273 > Detecting V4L2 devices > 2009/05/04 03:33:52.301 0:00.273 > Unable to detect v4l2 directory > 2009/05/04 03:33:52.371 0:00.343 > OpalMan Registered endpoint with prefix pc > I: caps.c: Limited capabilities successfully to CAP_SYS_NICE. > I: caps.c: Dropping root privileges. > I: caps.c: Limited capabilities successfully to CAP_SYS_NICE. > 2009/05/04 03:33:52.543 0:00.515 > OpalMan Registered endpoint with prefix sip > 2009/05/04 03:33:52.548 0:00.520 > OpalMan Registered endpoint with prefix sips > 2009/05/04 03:33:52.551 0:00.523 > OpalMan Registered endpoint with prefix h323 > 2009/05/04 03:33:52.552 0:00.524 > OpalMan Registered endpoint with prefix h323s > 2009/05/04 03:34:12.680 0:20.652 subscriber:0xb5506b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.680 0:20.652 subscriber:0xb5506b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.681 0:20.653 subscriber:0xb5506b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.681 0:20.653 subscriber:0xb5506b90 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:12.752 0:20.724 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.752 0:20.725 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.753 0:20.725 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:12.753 0:20.725 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.753 0:20.725 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.753 0:20.725 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:12.754 0:20.726 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.754 0:20.726 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.754 0:20.726 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:12.755 0:20.727 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.755 0:20.727 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:12.755 0:20.727 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:13.261 0:21.233 > Ekiga version 3.2.0 > 2009/05/04 03:34:13.262 0:21.234 OPAL > version 3.6.1 > 2009/05/04 03:34:13.263 0:21.235 > PTLIB version 2.6.1 > 2009/05/04 03:34:13.263 0:21.235 > GNOME support disabled > 2009/05/04 03:34:13.264 0:21.236 > Accelerated rendering support enabled > 2009/05/04 03:34:13.264 0:21.236 DBUS > support enabled > 2009/05/04 03:34:13.264 0:21.236 > GConf support enabled > 2009/05/04 03:34:13.264 0:21.237 > ESound support disabled > 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:24.812 0:32.784 CallSetup:0xb4914b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:24.812 0:32.785 CallSetup:0xb4914b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:24.813 0:32.785 CallSetup:0xb4914b90 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:27.648 0:35.621 CallSetup:0xb4892b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > SIP Could not find udp$ekiga.net:5060 > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > Opal Could not find host "ekiga.net" > 2009/05/04 03:34:27.649 0:35.621 CallSetup:0xb4892b90 > SIP Could not find udp$ekiga.net:5060 > terminate called after throwing an instance of 'std::length_error' > what(): basic_string::_S_create > Aborted Hi, Sorry to reply so late. I think 3.2.5 solves this issue. Could you try with it? If it is still there, please inform us. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 14 21:32:05 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 14 Jul 2009 23:32:05 +0200 Subject: [Ekiga-list] ekiga 3.2.x hates playing "newmessage.wav" In-Reply-To: <28672.45063.qm@web52904.mail.re2.yahoo.com> References: <28672.45063.qm@web52904.mail.re2.yahoo.com> Message-ID: <4A5CF955.2020108@pu-pm.univ-fcomte.fr> Chris Rankin wrote: > Every time ekiga 3.2.x plays this WAV file, I get an error message saying: > > "Error while opening audio output device SB Audigy 2 ZS [SB0353] > > No incoming sound will be played. > > The selected audio device was successfully opened but it is impossible to write data to this device. In case it is a pluggable device it may be sufficient to reconnect it. If not, or if it still is not accessible, please check your audio setup." > > Yes, it does play the sound too, so I'm thinking that the error is bogus. Sorry for this late reply. I created a bug report, not to forget it, http://bugzilla.gnome.org/show_bug.cgi?id=588532 . Thanks, -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 14 21:32:20 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 14 Jul 2009 23:32:20 +0200 Subject: [Ekiga-list] ekiga 3.2.x hates playing "newmessage.wav" In-Reply-To: <28672.45063.qm@web52904.mail.re2.yahoo.com> References: <28672.45063.qm@web52904.mail.re2.yahoo.com> Message-ID: <4A5CF964.7040001@pu-pm.univ-fcomte.fr> Chris Rankin wrote: > Every time ekiga 3.2.x plays this WAV file, I get an error message saying: > > "Error while opening audio output device SB Audigy 2 ZS [SB0353] > > No incoming sound will be played. > > The selected audio device was successfully opened but it is impossible to write data to this device. In case it is a pluggable device it may be sufficient to reconnect it. If not, or if it still is not accessible, please check your audio setup." > > Yes, it does play the sound too, so I'm thinking that the error is bogus. Sorry for this late reply. I created a bug report, not to forget it, http://bugzilla.gnome.org/show_bug.cgi?id=588532 . Thanks, -- Eugen From dixonpete at gmail.com Tue Jul 14 21:36:10 2009 From: dixonpete at gmail.com (Pete Dixon) Date: Tue, 14 Jul 2009 17:36:10 -0400 Subject: [Ekiga-list] Ekiga freezing on start-up In-Reply-To: <4A5CF6D6.60905@pu-pm.univ-fcomte.fr> References: <4A5CDE05.2090002@pu-pm.univ-fcomte.fr> <4A5CE77C.4020302@pu-pm.univ-fcomte.fr> <4A5CF6D6.60905@pu-pm.univ-fcomte.fr> Message-ID: > > Tell us how the duplicated entries appear, what do you type in the > assistant. We could fix that (if it's a bug). > That's simple enough. Just run the Assistant multiple times. Pairs of Ekiga.net and Ekiga Call Out are created each time. I was varying the passwords each time to simulate the mistakes I had been making before. I think I had 10 pairs by the time I was moved to find this mailing list. Pete -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 14 21:43:23 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 14 Jul 2009 23:43:23 +0200 Subject: [Ekiga-list] Ekiga freezing on start-up In-Reply-To: References: <4A5CDE05.2090002@pu-pm.univ-fcomte.fr> <4A5CE77C.4020302@pu-pm.univ-fcomte.fr> <4A5CF6D6.60905@pu-pm.univ-fcomte.fr> Message-ID: <4A5CFBFB.4030901@pu-pm.univ-fcomte.fr> Pete Dixon wrote: >> Tell us how the duplicated entries appear, what do you type in the >> assistant. We could fix that (if it's a bug). >> > > That's simple enough. Just run the Assistant multiple times. Pairs of > Ekiga.net and Ekiga Call Out are created each time. I was varying the > passwords each time to simulate the mistakes I had been making before. I > think I had 10 pairs by the time I was moved to find this mailing list. Thanks, I remembered that this is a known issue, http://bugzilla.gnome.org/show_bug.cgi?id=380799 -- Eugen From chinku.linux at gmail.com Wed Jul 15 06:55:26 2009 From: chinku.linux at gmail.com (chaitanya mehandru) Date: Wed, 15 Jul 2009 12:25:26 +0530 Subject: [Ekiga-list] Compiling Ekiga 3.2.5 In-Reply-To: <180372.19145.qm@web33802.mail.mud.yahoo.com> References: <180372.19145.qm@web33802.mail.mud.yahoo.com> Message-ID: <24b40b2b0907142355t587b1b9dvff8f9c71ce406122@mail.gmail.com> Hi, Once u have installed ptlib and then opal cant be found sounds a little absurd. But ptlib is installed already on your system if you followed the right steps mentioned for installing ptlib. To verify and let opal find ptlib, please do the following on your Fedora machine: On the command line, type: cd /usr/bin pkg-config --list-all | grep ptlib If ptlib is installed, the above command will list the ptlib from the pkg-config file. After that, type: export PKG_CONFIG_PATH= /usr/bin/pkg-config Now try to install OPAL. When ptlib gets installed, opal tries to look for it in /usr/local/bin by default. But the pkg-config file is in the /usr/bin directory. So we need to export the path to pkg-config and let opal search the pkg-config file and confirm that ptlib is installed. I have tried these steps on fedora 9 system and was able to install ekiga and get it running. Thanks, Chaitanya Mehandru Platform Engineer Intel Corporation Bangalore On Fri, Jul 10, 2009 at 10:52 PM, J. Rehbock wrote: > PTLIB compiles without any apparent problem. However, when I try to > configure OPAL, I am told PTLIB cannot be found. I get the same result in > both Fedora 11 and Mandriva 2009.1. > > I know this stuff is not rocket science, but to a non-coder Ekiga user it > is frustrating. Any step-by-step help would be appreciated. > > Thanks in advance. > > geno > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 15 15:34:02 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 15 Jul 2009 17:34:02 +0200 Subject: [Ekiga-list] Default account In-Reply-To: <4A479E00.8070001@googlemail.com> References: <4A479E00.8070001@googlemail.com> Message-ID: <4A5DF6EA.4000605@pu-pm.univ-fcomte.fr> Christian Sch?fer wrote: > Hi, > > I asked myself how to set the default account in ekiga 3.2.4. The wiki > says something about highlighting the account and clicking 'default' in > the account dialog, however this option doesn't seem to be present in > this version. > I have several sip accounts configured, but I only want to use one > specific account for PC-to-phone calls. I know that it's possible to > append '@' and the registrar-part of the desired account to the phone > number, however having the default-account option is more convenient. > Any ideas? Hi, Sorry to reply late. Why is it more convenient? You have auto-completion in the URI bar anyway. If I understood correctly, the sender account and registrar are taken from the destination address, as you wrote. -- Eugen From schaefec at googlemail.com Wed Jul 15 15:38:15 2009 From: schaefec at googlemail.com (=?UTF-8?B?Q2hyaXN0aWFuIFNjaMOkZmVy?=) Date: Wed, 15 Jul 2009 11:38:15 -0400 Subject: [Ekiga-list] Default account In-Reply-To: <4A5DF6EA.4000605@pu-pm.univ-fcomte.fr> References: <4A479E00.8070001@googlemail.com> <4A5DF6EA.4000605@pu-pm.univ-fcomte.fr> Message-ID: <4A5DF7E7.2020906@googlemail.com> Eugen Dedu wrote: >> I asked myself how to set the default account in ekiga 3.2.4. The wiki >> says something about highlighting the account and clicking 'default' >> in the account dialog, however this option doesn't seem to be present >> in this version. >> I have several sip accounts configured, but I only want to use one >> specific account for PC-to-phone calls. I know that it's possible to >> append '@' and the registrar-part of the desired account to the phone >> number, however having the default-account option is more convenient. >> Any ideas? > Why is it more convenient? You have auto-completion in the URI bar anyway. You're right, I just noticed that. But that doesn't seem to work when using the dialpad. Chris From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 15 15:51:14 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 15 Jul 2009 17:51:14 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <4A573623.4050107@free.fr> References: <4A571447.8020302@pu-pm.univ-fcomte.fr> <1247221116.18172.34.camel@scorpion.multitel.be> <4A573623.4050107@free.fr> Message-ID: <4A5DFAF2.6030806@pu-pm.univ-fcomte.fr> Julien Puydt wrote: > Damien Sandras a ?crit : >> Le vendredi 10 juillet 2009 ? 12:13 +0200, Eugen Dedu a ?crit : >>> Mateusz Kaduk wrote: >>>> Hi, >>>> >>>> I am on Debian (sid) still using 3.2.1~git20090515. I would like to >>>> know if this issue was fixed in upcomming 3.2.5. >>>> The problem is with contact availability status it gets rarely >>>> updated if ever. >>>> >>>> How does ekiga server determinate if user is still online? Are there >>>> any ping-pong requests send ? >>>> My girlfriend turns off ekiga, but I still see her online, when I come >>>> back I try calling, after restarting ekiga this status is updated. >>>> >>>> How long it takes to update user status in a normal working case ? Is >>>> it a bug or just design ? >>> If I remember correctly, when a person quits ekiga, there is no >>> update sent on the server. However, the server (or the client) >>> periodically (15 min I think) sends info to remote party about the >>> presence. So, when a person quits ekiga, it will take at most 15 min >>> to update his presence. >>> >>> Quitting ekiga does not send an update because people wanted that >>> ekiga finishes fast. I still think that it is better that ekiga >>> sends an update and waits for the answer, even if it takes a 1-3 >>> seconds. The proper fix would be to hide that from the user, for ex. >>> when the user quits the GUI finishes, but not the program. >> >> Like it was before, but users complained that it did not exit cleanly. >> Users generally do not agree between themselves ;-) > > What about sending a message to the server "I'm disconnecting"... and > *not* wait for any answer? 1. The message might be lost. 2. I can make all the people offline in one click :o) 3. We can also make 1 packet go, 1 packet come back, 1 packet go By the way, why did it take so much time to finish? It's about 2 back and forth packets, it should take a few hundreds of ms (about 2 RTTs), isn't that right? > PS: http://bugzilla.gnome.org/show_bug.cgi?id=577526 -- Eugen From galaxtri2 at yahoo.com Wed Jul 15 16:12:02 2009 From: galaxtri2 at yahoo.com (Garry Tristan) Date: Wed, 15 Jul 2009 09:12:02 -0700 (PDT) Subject: [Ekiga-list] Ekiga 3.25 compiled OK but unable to detect Audio Device Message-ID: <702402.40982.qm@web36504.mail.mud.yahoo.com> Hi, I followed the instructions http://wiki.ekiga.org/index.php/Compiling_Ekiga to compile Ekiga 3.25 My system is Ubuntu 9.04 x64 and Ekiga 3.20 was already there and was working OK. The reason I wanted to try 3.25 is to get more codecs and hopefully a better program with all the bug fixes. I compiled in this order 1. ptlib: ./configure --enable-alsa=yes --disable-oss 2. opal 3. ekiga: ./configure --prefix=/usr --disable-ldap NOTE: I got plenty of dependency errors with LDAP and as I don't need it. I think that it's OK to disable it. After successful sudo make, sudo make install. Ekiga 3.25 has replaced v3.20 in Application / Internet menu. However, the new Ekiga 3.25 is unable to detect Asla audio device. The only device available in the dropdown list is SILENT (Ekiga/Ekiga). The sound is working OK. Rhythmbox, Totem, Skype, Pidgin. The previous Ekiga 3.20 was also working OK. Question 1: How to make Ekiga 3.25 detect correctly audio devices? Question 2: In case Q1 is unsolvable, how can I remove completely all traces of Ekiga 3.25 so that I can bring back Ekiga 3.20 from the Ubutu repository? For Q2, I have done "sudo make uninstall". Nothing happened. Ekiga 3.25 is still in the Application/ Internet menu and if clicked on it, the program starts normally as if it was not affected by the make uninstall. Thanks very much in advance for any help. Garry -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 15 18:16:59 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 15 Jul 2009 20:16:59 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: References: <4A525683.1010807@pu-pm.univ-fcomte.fr> Message-ID: <4A5E1D1B.4000409@pu-pm.univ-fcomte.fr> Bret Busby wrote: > On Mon, 6 Jul 2009, Mateusz Kaduk wrote: > >> Date: Mon, 6 Jul 2009 22:02:20 +0200 >> From: Mateusz Kaduk >> Reply-To: Ekiga mailing list >> To: Ekiga mailing list >> Subject: Re: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available >> >> I am looking forward to see it in Debian sid >> >> 2009/7/6 Eugen Dedu : >>> This is the five stable release of the 3.2 version of Ekiga. >> > > And I, in Debian 4.0 and 5.0, and Ubuntu 8.04 ... Have finally :o) arrived in debian unstable, cf. http://packages.qa.debian.org/e/ekiga.html -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Wed Jul 15 18:38:16 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Wed, 15 Jul 2009 20:38:16 +0200 Subject: [Ekiga-list] Ekiga 3.25 compiled OK but unable to detect Audio Device In-Reply-To: <702402.40982.qm@web36504.mail.mud.yahoo.com> References: <702402.40982.qm@web36504.mail.mud.yahoo.com> Message-ID: <4A5E2218.6090103@pu-pm.univ-fcomte.fr> Garry Tristan wrote: > Hi, Hi Garry, > I followed the instructions http://wiki.ekiga.org/index.php/Compiling_Ekiga to compile Ekiga 3.25 > > My system is Ubuntu 9.04 x64 and Ekiga 3.20 was already there and was working OK. The reason I wanted to try 3.25 is to get more codecs and hopefully a better program with all the bug fixes. > > I compiled in this order > > 1. ptlib: ./configure --enable-alsa=yes --disable-oss What does "ls -lR /usr/lib/ptlib-*" show? Do you have libasound2-dev installed? If not, you should install it and recompile ptlib, opal, ekiga. If yes, do you have the output of ptlib's configure? > 2. opal > 3. ekiga: ./configure --prefix=/usr --disable-ldap > > NOTE: I got plenty of dependency errors with LDAP and as I don't need it. I think that it's OK to disable it. > > After successful sudo make, sudo make install. Ekiga 3.25 has replaced v3.20 in Application / Internet menu. However, the new Ekiga 3.25 is unable to detect Asla audio device. The only device available in the dropdown list is SILENT (Ekiga/Ekiga). > > The sound is working OK. Rhythmbox, Totem, Skype, Pidgin. The previous Ekiga 3.20 was also working OK. > > Question 1: How to make Ekiga 3.25 detect correctly audio devices? See above. > Question 2: In case Q1 is unsolvable, how can I remove completely all traces of Ekiga 3.25 so that I can bring back Ekiga 3.20 from the Ubutu repository? > > For Q2, I have done "sudo make uninstall". Nothing happened. Ekiga 3.25 is still in the Application/ Internet menu and if clicked on it, the program starts normally as if it was not affected by the make uninstall. This is interesting. Could you tell us what sudo make uninstall prints (sud make uninstall 2>&1|tee output, and send us output)? -- Eugen From dsandras at seconix.com Wed Jul 15 20:43:06 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 15 Jul 2009 22:43:06 +0200 Subject: [Ekiga-list] Ekiga 3.25 compiled OK but unable to detect Audio Device In-Reply-To: <4A5E2218.6090103@pu-pm.univ-fcomte.fr> References: <702402.40982.qm@web36504.mail.mud.yahoo.com> <4A5E2218.6090103@pu-pm.univ-fcomte.fr> Message-ID: <1247690586.21638.1.camel@scorpion.multitel.be> Le mercredi 15 juillet 2009 ? 20:38 +0200, Eugen Dedu a ?crit : > > Question 2: In case Q1 is unsolvable, how can I remove completely all traces of Ekiga 3.25 so that I can bring back Ekiga 3.20 from the Ubutu repository? > > > > For Q2, I have done "sudo make uninstall". Nothing happened. Ekiga 3.25 is still in the Application/ Internet menu and if clicked on it, the program starts normally as if it was not affected by the make uninstall. > > This is interesting. Could you tell us what sudo make uninstall prints > (sud make uninstall 2>&1|tee output, and send us output)? My guess would be that an old Ekiga is still in the menu (installed in /usr/bin) and that the new one was uninstalled from where it was installed (probably another location than /usr/bin). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Jul 15 20:43:18 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 15 Jul 2009 22:43:18 +0200 Subject: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available In-Reply-To: <4A5E1D1B.4000409@pu-pm.univ-fcomte.fr> References: <4A525683.1010807@pu-pm.univ-fcomte.fr> <4A5E1D1B.4000409@pu-pm.univ-fcomte.fr> Message-ID: <1247690598.21638.2.camel@scorpion.multitel.be> Le mercredi 15 juillet 2009 ? 20:16 +0200, Eugen Dedu a ?crit : > Bret Busby wrote: > > On Mon, 6 Jul 2009, Mateusz Kaduk wrote: > > > >> Date: Mon, 6 Jul 2009 22:02:20 +0200 > >> From: Mateusz Kaduk > >> Reply-To: Ekiga mailing list > >> To: Ekiga mailing list > >> Subject: Re: [Ekiga-list] ANNOUNCE - Ekiga 3.2.5 [STABLE] available > >> > >> I am looking forward to see it in Debian sid > >> > >> 2009/7/6 Eugen Dedu : > >>> This is the five stable release of the 3.2 version of Ekiga. > >> > > > > And I, in Debian 4.0 and 5.0, and Ubuntu 8.04 ... > > Have finally :o) arrived in debian unstable, cf. > http://packages.qa.debian.org/e/ekiga.html Excellent news! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From galaxtri2 at yahoo.com Thu Jul 16 03:19:07 2009 From: galaxtri2 at yahoo.com (Garry Tristan) Date: Wed, 15 Jul 2009 20:19:07 -0700 (PDT) Subject: [Ekiga-list] Ekiga 3.25 compiled OK but unable to detect Audio Device In-Reply-To: <1247690586.21638.1.camel@scorpion.multitel.be> References: <702402.40982.qm@web36504.mail.mud.yahoo.com> <4A5E2218.6090103@pu-pm.univ-fcomte.fr> <1247690586.21638.1.camel@scorpion.multitel.be> Message-ID: <24518.96283.qm@web36508.mail.mud.yahoo.com> Salut Damien, >My guess would be that an old Ekiga is still in the menu (installed in /usr/bin) and that the new one was uninstalled from where it was installed (probably another location than /usr/bin). As soon as I succeeded the compilation of Ekiga 3.25, th e Menu Applications / Internet / Ekiga Softphone is still there. And when I click on it, Ekiga starts and the About box indicates version 3.2.5. So I assume that the new Ekiga know how to replace the older 3.20 (came standard when I installed buntu 9.04 x64). I removed the previous Ekiga 3.20 (the one comng wth Ubuntu) by Synaptic Pakage Manager and marked ekiga for removal. Then I ran the "sudo make uninstall" of ekiga, opal, ptlib. But Ekiga 3.25 is still present and can start OK. After I removed completely the original Ekiga (Ubuntu package manage calls this "Mark for complete removel, includinf config file), Ekiga 3.5 still starts and if I do Edit Preferences, it complained: Error stating file /usr/share/sounds Ekiga: no such file or directoty However all the SIP settings are still in place (where does it read the configuration from? They have been removed!) As I have asked Eugen in the previous email. I would like to remove Ekiga 3.25 completely. Is it possible? Thanks in advance Garry ________________________________ From: Damien Sandras To: Ekiga mailing list Sent: Wednesday, July 15, 2009 4:43:06 PM Subject: Re: [Ekiga-list] Ekiga 3.25 compiled OK but unable to detect Audio Device Le mercredi 15 juillet 2009 ? 20:38 +0200, Eugen Dedu a ?crit : > > Question 2: In case Q1 is unsolvable, how can I remove completely all traces of Ekiga 3.25 so that I can bring back Ekiga 3.20 from the Ubutu repository? > > > > For Q2, I have done "sudo make uninstall". Nothing happened. Ekiga 3.25 is still in the Application/ Internet menu and if clicked on it, the program starts normally as if it was not affected by the make uninstall. > > This is interesting. Could you tell us what sudo make uninstall prints > (sud make uninstall 2>&1|tee output, and send us output)? My guess would be that an old Ekiga is still in the menu (installed in /usr/bin) and that the new one was uninstalled from where it was installed (probably another location than /usr/bin). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Fri Jul 17 20:54:12 2009 From: sevmek at free.fr (yannick) Date: Fri, 17 Jul 2009 22:54:12 +0200 Subject: [Ekiga-list] Win32 Ekiga 3.2.5 preview In-Reply-To: <4A60E138.4040203@gwdg.de> References: <4A60E138.4040203@gwdg.de> Message-ID: <4A60E4F4.1040903@free.fr> Michael Rickmann a ?crit : > available at http://wwwuser.gwdg.de/~mrickma/ekiga/ . They are the files > containing 3.2.5 . I think that is about what I can achieve at the > moment. Refinements will follow. Please test!! If you do not have > Windows, free some 30 -50G partition on one of your disks, google for > "Windows 7" (I think MS is doing a good job now), get it, install it, > convince grub to start it (may be tricky), install Ekiga and test. > Michael Following it to users ml: If you use windows, please test this version: http://wwwuser.gwdg.de/~mrickma/ekiga/ekiga-setup-3.2.5-release.exe (18MB) Please report issues with it. Best regards, Yannick From palos at post.sk Sat Jul 18 09:57:33 2009 From: palos at post.sk (Palo S.) Date: 18 Jul 2009 11:57:33 +0200 (CEST) Subject: [Ekiga-list] server down again Message-ID: <4A619C8D.000001.15338@kamasutra> Down again... ----- Origin?lna Spr?va ----- Od: Damien Sandras Komu: Ekiga mailing list Poslan?: 12.07.2009 14:47 Predmet: Re: [Ekiga-list] server down again > Le dimanche 12 juillet 2009 ?? 13:58 +0200, Michael Rickmann a ??crit : > > Damien Sandras schrieb: > > > Le samedi 11 juillet 2009 ?? 18:41 -0400, Andre Robatino a ??crit : > > >> Down again. > > > > > > Restarted. > > > > > > As I said, somebody is having fun during the night and crashes it. > > I am not quite shure that it is not me. I am trying to find a bug of > > Win32 Ekiga. It seems opal/ptlib related and is unfortunately also in > > the versions needed for Ekiga 3.2.5. Instead of opening the audio device > > when a call has been established to 500 at ekiga.net, windows are piling up > > and render XP or Win7 rather unusable. Surprisingly this does not happen > > when connecting to a local Ekiga 2.0.10 by direct IP. So I have to kill > > Ekiga before Windows gets stuck. Please keep starting ekiga.net so that > > I can continue bisecting ptlib/opal. > > I have put a script. It should not go down anymore. > -- > _ Damien Sandras > (o- > //\\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ Be IP : http://www.beip.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list __________ http://www.inzeraty.sk/ - Bezplatn? inzercia v najob??benej??ch kateg?ri?ch From palos at post.sk Sat Jul 18 17:46:49 2009 From: palos at post.sk (Palo S.) Date: 18 Jul 2009 19:46:49 +0200 (CEST) Subject: [Ekiga-list] server down again Message-ID: <4A620A89.000001.10862@kamasutra> Still down the whole day. Can somebody please restart it? ----- Origin?lna Spr?va ----- Od: Palo S. Komu: Poslan?: 18.07.2009 11:57 Predmet: Re: [Ekiga-list] server down again > > Down again... > > ----- Origin?lna Spr?va ----- > Od: Damien Sandras > Komu: Ekiga mailing list > Poslan?: 12.07.2009 14:47 > Predmet: Re: [Ekiga-list] server down again > > > Le dimanche 12 juillet 2009 ?? 13:58 +0200, Michael Rickmann a ??crit : > > > Damien Sandras schrieb: > > > > Le samedi 11 juillet 2009 ?? 18:41 -0400, Andre Robatino a ??crit : > > > >> Down again. > > > > > > > > Restarted. > > > > > > > > As I said, somebody is having fun during the night and crashes it. > > > I am not quite shure that it is not me. I am trying to find a bug of > > > Win32 Ekiga. It seems opal/ptlib related and is unfortunately also in > > > the versions needed for Ekiga 3.2.5. Instead of opening the audio device > > > when a call has been established to 500 at ekiga.net, windows are piling up > > > and render XP or Win7 rather unusable. Surprisingly this does not happen > > > when connecting to a local Ekiga 2.0.10 by direct IP. So I have to kill > > > Ekiga before Windows gets stuck. Please keep starting ekiga.net so that > > > I can continue bisecting ptlib/opal. > > > > I have put a script. It should not go down anymore. > > -- > > _ Damien Sandras > > (o- > > //\\\\ Ekiga Softphone : http://www.ekiga.org/ > > v_/_ Be IP : http://www.beip.be/ > > FOSDEM : http://www.fosdem.org/ > > SIP Phone : sip:dsandras at ekiga.net > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > __________ > http://www.inzeraty.sk/ - Bezplatn? inzercia v najob??benej??ch kateg?ri?ch > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > __________ http://www.pnp.sk - pridajte svoje fotky na PaciNepaci From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jul 18 18:48:53 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 18 Jul 2009 20:48:53 +0200 Subject: [Ekiga-list] server down again In-Reply-To: <4A620A89.000001.10862@kamasutra> References: <4A620A89.000001.10862@kamasutra> Message-ID: <4A621915.5090001@pu-pm.univ-fcomte.fr> It's Damien who has the key of the kingdom... He plans to work on ekiga.net this week I think... Eugen Palo S. wrote: > Still down the whole day. Can somebody please restart it? > > > > ----- Origin?lna Spr?va ----- > Od: Palo S. > Komu: > Poslan?: 18.07.2009 11:57 > Predmet: Re: [Ekiga-list] server down again > >> Down again... >> >> ----- Origin?lna Spr?va ----- >> Od: Damien Sandras >> Komu: Ekiga mailing list >> Poslan?: 12.07.2009 14:47 >> Predmet: Re: [Ekiga-list] server down again >> >>> Le dimanche 12 juillet 2009 ? 13:58 +0200, Michael Rickmann a ??crit : >>>> Damien Sandras schrieb: >>>>> Le samedi 11 juillet 2009 ? 18:41 -0400, Andre Robatino a ??crit : >>>>>> Down again. >> > > > Restarted. >> > > > As I said, somebody is having fun during the night and crashes it. >>>> I am not quite shure that it is not me. I am trying to find a bug of >> > > Win32 Ekiga. It seems opal/ptlib related and is unfortunately also in >> > > the versions needed for Ekiga 3.2.5. Instead of opening the audio device >> > > when a call has been established to 500 at ekiga.net, windows are piling up >> > > and render XP or Win7 rather unusable. Surprisingly this does not happen >> > > when connecting to a local Ekiga 2.0.10 by direct IP. So I have to kill >> > > Ekiga before Windows gets stuck. Please keep starting ekiga.net so that >> > > I can continue bisecting ptlib/opal. >> > I have put a script. It should not go down anymore. >>> -- >> > _ Damien Sandras >>> (o- >> > //\\\\ Ekiga Softphone : http://www.ekiga.org/ >>> v_/_ Be IP : http://www.beip.be/ >>> FOSDEM : http://www.fosdem.org/ >>> SIP Phone : sip:dsandras at ekiga.net >>> >> > >> > _______________________________________________ >>> ekiga-list mailing list >>> ekiga-list at gnome.org >>> http://mail.gnome.org/mailman/listinfo/ekiga-list >> >> __________ >> http://www.inzeraty.sk/ - Bezplatn? inzercia v najob??benej??ch kateg?ri?ch >> >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > > > __________ > http://www.pnp.sk - pridajte svoje fotky na PaciNepaci > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From nicolas.michel at lemail.be Sat Jul 18 19:25:11 2009 From: nicolas.michel at lemail.be (Nicolas Michel) Date: Sat, 18 Jul 2009 21:25:11 +0200 Subject: [Ekiga-list] Problem on Ubuntu Jaunty 64 bits Message-ID: <4A622197.5070002@lemail.be> Hello, I can't make Ekiga working on my jaunty 64 bits. If I go to the account configuration window, it tells me : "Impossible de s'inscrire(D?lai d?pass?)". The ekiga version is the one of the official ubuntu repository : 3.2.0 # dpkg - l | grep ekiga ii ekiga 3.2.0-0ubuntu2 H.323 and SIP compatible VoIP client Thanks for your advices, nm From Eugen.Dedu at pu-pm.univ-fcomte.fr Sat Jul 18 19:28:15 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Sat, 18 Jul 2009 21:28:15 +0200 Subject: [Ekiga-list] Problem on Ubuntu Jaunty 64 bits In-Reply-To: <4A622197.5070002@lemail.be> References: <4A622197.5070002@lemail.be> Message-ID: <4A62224F.7090906@pu-pm.univ-fcomte.fr> Nicolas Michel wrote: > Hello, > > I can't make Ekiga working on my jaunty 64 bits. If I go to the account > configuration window, it tells me : "Impossible de s'inscrire(D?lai > d?pass?)". > The ekiga version is the one of the official ubuntu repository : 3.2.0 > # dpkg - l | grep ekiga > ii ekiga > 3.2.0-0ubuntu2 H.323 and SIP > compatible VoIP client The ekiga.net server is currently down, please be patient. -- Eugen From mark473 at gmail.com Sun Jul 19 08:30:11 2009 From: mark473 at gmail.com (j t) Date: Sun, 19 Jul 2009 09:30:11 +0100 Subject: [Ekiga-list] Any suggestions where I can get a free SIP address? Message-ID: Hi all. Firstly, please excuse my newbie status - I only got ekiga up and running yesterday. I'm trying to make free voip calls to a friend and we both a ekiga.net sip addresses, but from what I can tell, this server is often down (I think it's down at the moment). Are there any other recommended places where we can both get SIP addresses so that we can talk to each other? Many thanks to all the devs for their hard work. With kindest regards, Jaime. From sevmek at free.fr Sun Jul 19 15:54:30 2009 From: sevmek at free.fr (yannick) Date: Sun, 19 Jul 2009 17:54:30 +0200 Subject: [Ekiga-list] Any suggestions where I can get a free SIP address? In-Reply-To: References: Message-ID: <4A6341B6.80706@free.fr> j t a ?crit : > Hi all. > > Firstly, please excuse my newbie status - I only got ekiga up and > running yesterday. > > I'm trying to make free voip calls to a friend and we both a ekiga.net > sip addresses, but from what I can tell, this server is often down (I > think it's down at the moment). > > Are there any other recommended places where we can both get SIP > addresses so that we can talk to each other? > For free? I don't know any. Hopefully, Ekiga.net should be up on monday. In the meantime, you can call using the IP address: sip:xxx.xxx.xxx.xxx (if you are behind a NAT, i'm not sure it will work as good as with the server...) Best regards, Yannick > Many thanks to all the devs for their hard work. With kindest regards, > > Jaime. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > From mtbc at ixod.org Sun Jul 19 16:27:34 2009 From: mtbc at ixod.org (Mark T.B. Carroll) Date: Sun, 19 Jul 2009 12:27:34 -0400 Subject: [Ekiga-list] Any suggestions where I can get a free SIP address? In-Reply-To: (j. t.'s message of "Sun\, 19 Jul 2009 09\:30\:11 +0100") References: Message-ID: <8663do7i4p.fsf@ixod.org> j t writes: > Are there any other recommended places where we can both get SIP > addresses so that we can talk to each other? http://www.iptel.org/service might be worth a try. Mark From dfox94085 at gmail.com Sun Jul 19 16:36:38 2009 From: dfox94085 at gmail.com (David Fox) Date: Sun, 19 Jul 2009 09:36:38 -0700 Subject: [Ekiga-list] Any suggestions where I can get a free SIP address? In-Reply-To: <4A6341B6.80706@free.fr> References: <4A6341B6.80706@free.fr> Message-ID: <359a3c580907190936m573d920j80b9042bce257d45@mail.gmail.com> On Sun, Jul 19, 2009 at 8:54 AM, yannick wrote: > > In the meantime, you can call using the IP address: > sip:xxx.xxx.xxx.xxx But if the main server won't register the email address, then it won't work at all, right? Especially considering both stable (9.04 release version of ekiga) and stable 3.2.5 (self-compiled) quickly segfault seconds after displaying "can't register" messages. -- thanks for letting me change the magnetic patterns on your hard disk. From andre at bwh.harvard.edu Sun Jul 19 17:04:27 2009 From: andre at bwh.harvard.edu (Andre Robatino) Date: Sun, 19 Jul 2009 13:04:27 -0400 Subject: [Ekiga-list] Any suggestions where I can get a free SIP address? Message-ID: <4A63521B.30802@bwh.harvard.edu> gizmo5.com (click on "Members Sign in", then fill in the section under "Free Sign Up!") voip.brujula.com Unfortunately, these servers don't have presence. Anyone know one that does? -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 197 bytes Desc: OpenPGP digital signature URL: From galaxtri2 at yahoo.com Sun Jul 19 18:00:36 2009 From: galaxtri2 at yahoo.com (Garry Tristan) Date: Sun, 19 Jul 2009 11:00:36 -0700 (PDT) Subject: [Ekiga-list] Ekiga 3.25 compiled OK but unable to detect Audio Device In-Reply-To: <24518.96283.qm@web36508.mail.mud.yahoo.com> References: <702402.40982.qm@web36504.mail.mud.yahoo.com> <4A5E2218.6090103@pu-pm.univ-fcomte.fr> <1247690586.21638.1.camel@scorpion.multitel.be> <24518.96283.qm@web36508.mail.mud.yahoo.com> Message-ID: <991673.38662.qm@web36505.mail.mud.yahoo.com> Hi, Just want to follow up and close this thread. Still have audio device detection issue, even after installing libasound-dev and also ran Ubtuntu system updates. However I can finally uninstall Ekiga 3.25 manually and was able to install back Ekiga 3.20 from Ubuntu repository. I ran find /usr -iname "*ekiga*" The results showed that ekiga was found in usr/local while the uninstall script deleted files in /usr. I then did a couples of rm -rf in /usr/local to delete manually any ekiga I could find there. This time, Ekiga in Applicaions / Internet menu can no longer start (which I expect). Then I did sudo apt-get install ekiga and the version 3.20 is back and working again. Although there is no solution to my original request (fixing audio detection of Ekiga 3.25) however, I am happy now that I can at least remove the compiled version of Ekiga. Hope that the new version will be avaiable in Ubuntu repositories soon. Regards, Garry ________________________________ From: Garry Tristan To: Ekiga mailing list Sent: Wednesday, July 15, 2009 11:19:07 PM Subject: Re: [Ekiga-list] Ekiga 3.25 compiled OK but unable to detect Audio Device Salut Damien, >My guess would be that an old Ekiga is still in the menu (installed in /usr/bin) and that the new one was uninstalled from where it was installed (probably another location than /usr/bin). As soon as I succeeded the compilation of Ekiga 3.25, the Menu Applications / Internet / Ekiga Softphone is still there. And when I click on it, Ekiga starts and the About box indicates version 3.2.5. So I assume that the new Ekiga know how to replace the older 3.20 (came standard when I installed buntu 9.04 x64). I removed the previous Ekiga 3.20 (the one comng wth Ubuntu) by Synaptic Pakage Manager and marked ekiga for removal. Then I ran the "sudo make uninstall" of ekiga, opal, ptlib. But Ekiga 3.25 is still present and can start OK. After I removed completely the original Ekiga (Ubuntu package manage calls this "Mark for complete removel, includinf config file), Ekiga 3.5 still starts and if I do Edit Preferences, it complained: Error stating file /usr/share/sounds Ekiga: no such file or directoty However all the SIP settings are still in place (where does it read the configuration from? They have been removed!) As I have asked Eugen in the previous email. I would like to remove Ekiga 3.25 completely. Is it possible? Thanks in advance Garry ________________________________ From: Damien Sandras To: Ekiga mailing list Sent: Wednesday, July 15, 2009 4:43:06 PM Subject: Re: [Ekiga-list] Ekiga 3.25 compiled OK but unable to detect Audio Device Le mercredi 15 juillet 2009 ? 20:38 +0200, Eugen Dedu a ?crit : > > Question 2: In case Q1 is unsolvable, how can I remove completely all traces of Ekiga 3.25 so that I can bring back Ekiga 3.20 from the Ubutu repository? > > > > For Q2, I have done "sudo make uninstall". Nothing happened. Ekiga 3.25 is still in the Application/ Internet menu and if clicked on it, the program starts normally as if it was not affected by the make uninstall. > > This is interesting. Could you tell us what sudo make uninstall prints > (sud make uninstall 2>&1|tee output, and send us output)? My guess would be that an old Ekiga is still in the menu (installed in /usr/bin) and that the new one was uninstalled from where it was installed (probably another location than /usr/bin). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From paul.barron at dsl.pipex.com Sun Jul 19 18:59:00 2009 From: paul.barron at dsl.pipex.com (Paul Barron) Date: Sun, 19 Jul 2009 19:59:00 +0100 Subject: [Ekiga-list] ekiga failing to register Message-ID: <1248029940.8695.1.camel@production> Is anyone elses ekiga failing to register today? paul From dfox94085 at gmail.com Sun Jul 19 19:42:15 2009 From: dfox94085 at gmail.com (David Fox) Date: Sun, 19 Jul 2009 12:42:15 -0700 Subject: [Ekiga-list] ekiga failing to register In-Reply-To: <1248029940.8695.1.camel@production> References: <1248029940.8695.1.camel@production> Message-ID: <359a3c580907191242h5fc527a8ra3df76dbcdfdd24d@mail.gmail.com> On Sun, Jul 19, 2009 at 11:59 AM, Paul Barron wrote: > Is anyone elses ekiga failing to register today? Not working for me either. -- thanks for letting me change the magnetic patterns on your hard disk. From palos at post.sk Sun Jul 19 20:23:33 2009 From: palos at post.sk (Palo S.) Date: 19 Jul 2009 22:23:33 +0200 (CEST) Subject: [Ekiga-list] ekiga failing to register Message-ID: <4A6380C5.000001.31303@kamasutra> ekiga.net is down this weekend from some reason. See the previous threads about the same topic... ----- Origin?lna Spr?va ----- Od: David Fox Komu: Ekiga mailing list Poslan?: 19.07.2009 21:42 Predmet: Re: [Ekiga-list] ekiga failing to register > On Sun, Jul 19, 2009 at 11:59 AM, Paul Barron wrote: > > Is anyone elses ekiga failing to register today? > > Not working for me either. > > > > -- > thanks for letting me change the magnetic patterns on your hard disk. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > __________ http://chat.post.sk - zachatujte si s priatelmi na IRC.POST.SK From sevmek at free.fr Sun Jul 19 21:20:59 2009 From: sevmek at free.fr (yannick) Date: Sun, 19 Jul 2009 23:20:59 +0200 Subject: [Ekiga-list] Any suggestions where I can get a free SIP address? In-Reply-To: <359a3c580907190936m573d920j80b9042bce257d45@mail.gmail.com> References: <4A6341B6.80706@free.fr> <359a3c580907190936m573d920j80b9042bce257d45@mail.gmail.com> Message-ID: <4A638E3B.6020202@free.fr> David Fox a ?crit : > On Sun, Jul 19, 2009 at 8:54 AM, yannick wrote: >> In the meantime, you can call using the IP address: >> sip:xxx.xxx.xxx.xxx > > But if the main server won't register the email address, then it won't > work at all, right? Especially considering both stable (9.04 release If you use the IP directly, Ekiga wont use any server at all. It might work, depending on NAT issues... > version of ekiga) and stable 3.2.5 (self-compiled) quickly segfault > seconds after displaying "can't register" messages. Interesting; could you please report a backtrace following this procedure with 3.2.5? http://wiki.ekiga.org/index.php/Debugging_Ekiga#Getting_the_stack_backtrace Best regards, Yannick From dfox94085 at gmail.com Sun Jul 19 21:32:58 2009 From: dfox94085 at gmail.com (David Fox) Date: Sun, 19 Jul 2009 14:32:58 -0700 Subject: [Ekiga-list] Any suggestions where I can get a free SIP address? In-Reply-To: <4A638E3B.6020202@free.fr> References: <4A6341B6.80706@free.fr> <359a3c580907190936m573d920j80b9042bce257d45@mail.gmail.com> <4A638E3B.6020202@free.fr> Message-ID: <359a3c580907191432g73f00b2u816b2cd1d88d7e43@mail.gmail.com> On Sun, Jul 19, 2009 at 2:20 PM, yannick wrote: > procedure with 3.2.5? > http://wiki.ekiga.org/index.php/Debugging_Ekiga#Getting_the_stack_backtrace Attaching the backtrace. I wasn't able to do anything such as enter a sip address. We have a darkvoip sip address for berkeley tip tat we've been able to use before, but I can't get that to work at all today. -- thanks for letting me change the magnetic patterns on your hard disk. -------------- next part -------------- A non-text attachment was scrubbed... Name: gdb-ekiga.txt.gz Type: application/x-gzip Size: 6023 bytes Desc: not available URL: From David.Andrey at netmodule.com Mon Jul 20 11:10:23 2009 From: David.Andrey at netmodule.com (David Andrey) Date: Mon, 20 Jul 2009 13:10:23 +0200 Subject: [Ekiga-list] About Ekiga, and possible evolution Message-ID: <1MSqlL-0005W6-6o@wolf.netmodule.com> Hello, First of all ... thanks for Ekiga ! Great software and works well. I use Ekiga version 3.0.2 (Windows) to test our embedded SIP Endpoint since some weeks now. It will not be any concurrence J (PC is still needed on the other end). I could see that sometimes Ekiga replies on SIP INVITE with a destination IP of 10.0.0.120. This IP does not exists on my networks (172.x.x.x). Is this a know issue ? For my use, it will be great to have the following features: 1. MJPEG Codec, RFC 2435 2. Choice of the Network Interface Could this be options for a further release ? Will be a Version 3.2.x for Windows available soon ? Best regards David Andrey -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Jul 20 12:16:56 2009 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 20 Jul 2009 14:16:56 +0200 Subject: [Ekiga-list] ekiga.net Message-ID: <1248092216.3837.1.camel@scorpion.multitel.be> Hi all, Ekiga.net was restarted. I'm sorry, but I'm away until tomorrow night. There is another person who can restart the service but apparently he is away too. I'm sure it gives bad press to the problem, but there is no other solution right now. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From palos at post.sk Mon Jul 20 16:24:56 2009 From: palos at post.sk (Palo S.) Date: 20 Jul 2009 18:24:56 +0200 (CEST) Subject: [Ekiga-list] ekiga.net Message-ID: <4A649A58.000003.14043@kamasutra> Thanks for restarting it, I can confirm that it works as of now at least. P. ----- Origin?lna Spr?va ----- Od: Damien Sandras Komu: Poslan?: 20.07.2009 14:16 Predmet: [Ekiga-list] ekiga.net > Hi all, > > Ekiga.net was restarted. > > I\'m sorry, but I\'m away until tomorrow night. There is another person > who can restart the service but apparently he is away too. > > I\'m sure it gives bad press to the problem, but there is no other > solution right now. > -- > _ Damien Sandras > (o- > //\\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ Be IP : http://www.beip.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > __________ http://auto.sme.sk - V?etko o aut?ch (novinky, testy, autosal?n, auto?kola, porovnaj si auto) From stuart_lesnett at lesnett.com Mon Jul 20 16:25:11 2009 From: stuart_lesnett at lesnett.com (Stuart Lesnett) Date: Mon, 20 Jul 2009 12:25:11 -0400 Subject: [Ekiga-list] Win32 Ekiga 3.2.5 preview In-Reply-To: <4A60E4F4.1040903@free.fr> References: <4A60E138.4040203@gwdg.de> <4A60E4F4.1040903@free.fr> Message-ID: <1248107111.6203.9.camel@dig-charlee> On Fri, 2009-07-17 at 22:54 +0200, yannick wrote: > Michael Rickmann a ?crit : > > available at http://wwwuser.gwdg.de/~mrickma/ekiga/ . They are the files > > containing 3.2.5 . I think that is about what I can achieve at the > > moment. Refinements will follow. Please test!! If you do not have > > Windows, free some 30 -50G partition on one of your disks, google for > > "Windows 7" (I think MS is doing a good job now), get it, install it, > > convince grub to start it (may be tricky), install Ekiga and test. > > Michael > > Following it to users ml: > > If you use windows, please test this version: > http://wwwuser.gwdg.de/~mrickma/ekiga/ekiga-setup-3.2.5-release.exe (18MB) > > Please report issues with it. > > Best regards, > Yannick Yannick I have downloaded your new windows and installed it. I experienced NO problems during the install. After the install the WOULD NOT load an ERROR message "Ekiga is free Voice over IP phone has encountered a problem and needs to close". Upon clicking on the more information line, the following appears Error signature, AppName: ekiga.exe App/Ver: 3.2.5.0 ModName: ekiga.exe. New line Modver: 3.2.5.0 Offset: 000c1e5c. It seemed to unstall very thing and I've even tried rebooting long to encounter the same error. I'm currently running XP,sp1,sp2,sp3. Stu (wsl3rd) > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Jul 20 16:49:29 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 20 Jul 2009 18:49:29 +0200 Subject: [Ekiga-list] About Ekiga, and possible evolution In-Reply-To: <1MSqlL-0005W6-6o@wolf.netmodule.com> References: <1MSqlL-0005W6-6o@wolf.netmodule.com> Message-ID: <4A64A019.6020602@pu-pm.univ-fcomte.fr> David Andrey wrote: > Hello, > > > > First of all ... thanks for Ekiga ! Great software and works well. > > > > I use Ekiga version 3.0.2 (Windows) to test our embedded SIP Endpoint > since some weeks now. It will not be any concurrence J (PC is still > needed on the other end). > > I could see that sometimes Ekiga replies on SIP INVITE with a > destination IP of 10.0.0.120. This IP does not exists on my networks > (172.x.x.x). Is this a know issue ? No. What is your ifconfig output? Could you also send us the -d 4 output? > For my use, it will be great to have the following features: > > 1. MJPEG Codec, RFC 2435 This is a very big codec, each frame is a JPEG, I personally do not think that someone wants to implement it. > 2. Choice of the Network Interface Could you explain more? And why do you need that? > Will be a Version 3.2.x for Windows available soon ? Yes, see previous e-mails on the list. -- Eugen From dalbers at gmail.com Mon Jul 20 17:03:20 2009 From: dalbers at gmail.com (Darren Albers) Date: Mon, 20 Jul 2009 13:03:20 -0400 Subject: [Ekiga-list] ekiga.net In-Reply-To: <1248092216.3837.1.camel@scorpion.multitel.be> References: <1248092216.3837.1.camel@scorpion.multitel.be> Message-ID: <7cd7fc040907201003h61b833aob083b7ab17f7edf4@mail.gmail.com> Considering that it is a Free service (And a unique service it seems, I don't see many other Free SIP address providers!) I am always appreciative of what you can do and understand that you can't sit around to kick a server. On Mon, Jul 20, 2009 at 8:16 AM, Damien Sandras wrote: > Hi all, > > Ekiga.net was restarted. > > I'm sorry, but I'm away until tomorrow night. There is another person > who can restart the service but apparently he is away too. > > I'm sure it gives bad press to the problem, but there is no other > solution right now. > -- > ?_ ? ? Damien Sandras > (o- > //\ ? ?Ekiga Softphone : http://www.ekiga.org/ > v_/_ ? Be IP ? ? ? ? ? : http://www.beip.be/ > ? ? ? FOSDEM ? ? ? ? ?: http://www.fosdem.org/ > ? ? ? SIP Phone ? ? ? : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From Detlef.Lechner at gmx.net Mon Jul 20 18:31:49 2009 From: Detlef.Lechner at gmx.net (Detlef Lechner) Date: Mon, 20 Jul 2009 20:31:49 +0200 Subject: [Ekiga-list] ekiga failing to register In-Reply-To: <1248029940.8695.1.camel@production> References: <1248029940.8695.1.camel@production> Message-ID: <1248114709.14128.1018.camel@localhost.localdomain> On Sun, 2009-07-19 at 19:59 +0100, Paul Barron wrote: > Is anyone elses ekiga failing to register today? > paul +1 From David.Andrey at netmodule.com Tue Jul 21 06:39:38 2009 From: David.Andrey at netmodule.com (David Andrey) Date: Tue, 21 Jul 2009 08:39:38 +0200 Subject: [Ekiga-list] About Ekiga, and possible evolution In-Reply-To: <4A64A019.6020602@pu-pm.univ-fcomte.fr> References: <1MSqlL-0005W6-6o@wolf.netmodule.com> <4A64A019.6020602@pu-pm.univ-fcomte.fr> Message-ID: <1MT90q-0006VI-MY@wolf.netmodule.com> Hi, 10.0.0.120 I have the following networks: 172.a.b.c / 172.x.y.c / 192.u.v.y / 192.f.g.h What do you mean with "-d 4" output ? I will try to make a wireshark trace (after the holidays). MJPEG For the MJPEG, you are right ... it's big. Who can be interested ? Everyone who want to have a video stream to the iPhone. iPhone SDK do not provide access to the MPEG-4 / H.264 decoders. So MJPEG is at this time the only way it seems. Net. Interface I have a Desktop with more than 1 Network card. So, it could be very useful to set on which interface Ekiga is listening / sending. -----Original Message----- From: ekiga-list-bounces at gnome.org [mailto:ekiga-list-bounces at gnome.org] On Behalf Of Eugen Dedu Sent: Montag, 20. Juli 2009 18:49 To: Ekiga mailing list Subject: Re: [Ekiga-list] About Ekiga, and possible evolution David Andrey wrote: > Hello, > > > > First of all ... thanks for Ekiga ! Great software and works well. > > > > I use Ekiga version 3.0.2 (Windows) to test our embedded SIP Endpoint > since some weeks now. It will not be any concurrence J (PC is still > needed on the other end). > > I could see that sometimes Ekiga replies on SIP INVITE with a > destination IP of 10.0.0.120. This IP does not exists on my networks > (172.x.x.x). Is this a know issue ? No. What is your ifconfig output? Could you also send us the -d 4 output? > For my use, it will be great to have the following features: > > 1. MJPEG Codec, RFC 2435 This is a very big codec, each frame is a JPEG, I personally do not think that someone wants to implement it. > 2. Choice of the Network Interface Could you explain more? And why do you need that? > Will be a Version 3.2.x for Windows available soon ? Yes, see previous e-mails on the list. -- Eugen _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Jul 21 07:40:16 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 21 Jul 2009 09:40:16 +0200 Subject: [Ekiga-list] About Ekiga, and possible evolution In-Reply-To: <1MT90q-0006VI-MY@wolf.netmodule.com> References: <1MSqlL-0005W6-6o@wolf.netmodule.com> <4A64A019.6020602@pu-pm.univ-fcomte.fr> <1MT90q-0006VI-MY@wolf.netmodule.com> Message-ID: <4A6570E0.9030805@pu-pm.univ-fcomte.fr> David Andrey wrote: > Hi, > > 10.0.0.120 > I have the following networks: 172.a.b.c / 172.x.y.c / 192.u.v.y / 192.f.g.h > What do you mean with "-d 4" output ? http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output > I will try to make a wireshark trace (after the holidays). > > MJPEG > For the MJPEG, you are right ... it's big. Who can be interested ? Everyone who want to have a video stream to the iPhone. iPhone SDK do not provide access to the MPEG-4 / H.264 decoders. So MJPEG is at this time the only way it seems. > > Net. Interface > I have a Desktop with more than 1 Network card. So, it could be very useful to set on which interface Ekiga is listening / sending. If I understood correctly, ekiga sends on all interfaces until it receives the registration, an then it uses that interface to send from. Are you connected to Internet through two interfaces? > -----Original Message----- > From: ekiga-list-bounces at gnome.org [mailto:ekiga-list-bounces at gnome.org] On Behalf Of Eugen Dedu > Sent: Montag, 20. Juli 2009 18:49 > To: Ekiga mailing list > Subject: Re: [Ekiga-list] About Ekiga, and possible evolution > > David Andrey wrote: >> Hello, >> >> >> >> First of all ... thanks for Ekiga ! Great software and works well. >> >> >> >> I use Ekiga version 3.0.2 (Windows) to test our embedded SIP Endpoint >> since some weeks now. It will not be any concurrence J (PC is still >> needed on the other end). >> >> I could see that sometimes Ekiga replies on SIP INVITE with a >> destination IP of 10.0.0.120. This IP does not exists on my networks >> (172.x.x.x). Is this a know issue ? > > No. What is your ifconfig output? Could you also send us the -d 4 output? > >> For my use, it will be great to have the following features: >> >> 1. MJPEG Codec, RFC 2435 > > This is a very big codec, each frame is a JPEG, I personally do not > think that someone wants to implement it. > >> 2. Choice of the Network Interface > > Could you explain more? And why do you need that? > >> Will be a Version 3.2.x for Windows available soon ? > > Yes, see previous e-mails on the list. > From mrickma at gwdg.de Tue Jul 21 17:55:14 2009 From: mrickma at gwdg.de (Michael Rickmann) Date: Tue, 21 Jul 2009 19:55:14 +0200 Subject: [Ekiga-list] Win32 Ekiga 3.2.5 preview In-Reply-To: <1248107111.6203.9.camel@dig-charlee> References: <4A60E138.4040203@gwdg.de> <4A60E4F4.1040903@free.fr> <1248107111.6203.9.camel@dig-charlee> Message-ID: <4A660102.5000408@gwdg.de> Stuart Lesnett schrieb: > On Fri, 2009-07-17 at 22:54 +0200, yannick wrote: > >> Michael Rickmann a ?crit : >>> available at http://wwwuser.gwdg.de/~mrickma/ekiga/ . They are the files >>> containing 3.2.5 . I think that is about what I can achieve at the >>> moment. Refinements will follow. Please test!! If you do not have >>> Windows, free some 30 -50G partition on one of your disks, google for >>> "Windows 7" (I think MS is doing a good job now), get it, install it, >>> convince grub to start it (may be tricky), install Ekiga and test. >>> Michael >> Following it to users ml: >> >> If you use windows, please test this version: >> http://wwwuser.gwdg.de/~mrickma/ekiga/ekiga-setup-3.2.5-release.exe (18MB) >> >> Please report issues with it. >> >> Best regards, >> Yannick > > > Yannick I have downloaded your new windows and installed it. I > experienced NO problems during the install. > > After the install the WOULD NOT load an ERROR message "Ekiga is free > Voice over IP phone has encountered a problem and needs to close". > > Upon clicking on the more information line, the following appears Error > signature, AppName: ekiga.exe App/Ver: 3.2.5.0 ModName: ekiga.exe. New > line Modver: 3.2.5.0 Offset: 000c1e5c. > > It seemed to unstall very thing and I've even tried rebooting long to > encounter the same error. I'm currently running XP,sp1,sp2,sp3. > > Stu (wsl3rd) > Thanks for testing. I interpret your findings as a crash on startup. If I only could find a computer to reproduce it. I tried Ekiga on a couple of XP installations all sp2 and single core. Thanks again. Michael From dsandras at seconix.com Wed Jul 22 06:45:56 2009 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 22 Jul 2009 08:45:56 +0200 Subject: [Ekiga-list] ekiga.net In-Reply-To: <7cd7fc040907201003h61b833aob083b7ab17f7edf4@mail.gmail.com> References: <1248092216.3837.1.camel@scorpion.multitel.be> <7cd7fc040907201003h61b833aob083b7ab17f7edf4@mail.gmail.com> Message-ID: <1248245156.3824.7.camel@scorpion.multitel.be> Le lundi 20 juillet 2009 ? 13:03 -0400, Darren Albers a ?crit : > Considering that it is a Free service (And a unique service it seems, > I don't see many other Free SIP address providers!) I am always > appreciative of what you can do and understand that you can't sit > around to kick a server. Thank you :) I will improve the script that restarts it in case of problem (it did not work this week-end) and upgrade it asap. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Eugen.Dedu at pu-pm.univ-fcomte.fr Mon Jul 27 18:51:54 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Mon, 27 Jul 2009 20:51:54 +0200 Subject: [Ekiga-list] Ekiga contact presence In-Reply-To: <4A58D255.000001.03625@kamasutra> References: <4A58D255.000001.03625@kamasutra> Message-ID: <4A6DF74A.9090301@pu-pm.univ-fcomte.fr> Palo S. wrote: >>>>> My girlfriend turns off ekiga, but I still see her online, when I come >>>>> back I try calling, after restarting ekiga this status is updated. > > I can confirm the problem and it behaves like this on 4 > different computers in 4 different networks (everywhere > where I tried it) : If the other side connects, the status > updates quickly, if the other side quits, the status > _never_ gets updated. If I leave the client up for several > days then I end up with all my contacts permanently green. > I had this behaviour from the very first Ekiga 3.0 that > I installed. Fixed, http://bugzilla.gnome.org/show_bug.cgi?id=589917, kudos to Damien! -- Eugen From malik_jemes at hotmail.com Tue Jul 28 12:00:59 2009 From: malik_jemes at hotmail.com (malik_jemes at hotmail.com) Date: Tue, 28 Jul 2009 05:00:59 -0700 Subject: [Ekiga-list] Vacation reply In-Reply-To: Message-ID: An HTML attachment was scrubbed... URL: From cmraghavendran at yahoo.co.in Wed Jul 29 01:56:43 2009 From: cmraghavendran at yahoo.co.in (goole) Date: Tue, 28 Jul 2009 18:56:43 -0700 (PDT) Subject: [Ekiga-list] Need some help to encounter latency problem Message-ID: <24711113.post@talk.nabble.com> Hi, I am a new user of ekiga and had a very tough time configuring because the registration process would often fail even though the given information's were enough and correct.However,I configured it tried to talk to my friend who also has a ekiga account.he also lives in the same city.But during this conversation, we experienced high degree of latency.once i speak,approximately it takes about 6 seconds to reach him..Pls let me know if i can do any thing to reduce this latency.Thank you. -- View this message in context: http://www.nabble.com/Need-some-help-to-encounter-latency-problem-tp24711113p24711113.html Sent from the Ekiga General mailing list archive at Nabble.com. From nels at pgroupe.net Thu Jul 30 05:19:26 2009 From: nels at pgroupe.net (=?ISO-8859-1?Q?Beno=EEt?= Laniel) Date: Thu, 30 Jul 2009 09:19:26 +0400 Subject: [Ekiga-list] Ekiga 3.2.5 on Lenny In-Reply-To: <4A55A6D0.3000202@pu-pm.univ-fcomte.fr> References: <1247121503.13252.2.camel@oneil.pgroupe.net> <4A55A6D0.3000202@pu-pm.univ-fcomte.fr> Message-ID: <1248931166.28811.5.camel@oneil.pgroupe.net> Le jeudi 09 juillet 2009 ? 10:14 +0200, Eugen Dedu a ?crit : > Thanks! Could you upload it to http://backports.org/dokuwiki/doku.php ? > Thus is becomes "official". I rebuilt the packages using cowbuilder. I also built ekiga with g++-4.2 so everything has been built with lenny paackages. You can find the files here : http://blaniel.free.fr/debian/lenny-backports/ I think it should be ok for inclusion in lenny-backports, however I don't have a lot of time these days but I will do my best to make them available as soon as possible. Beno?t From dsandras at seconix.com Thu Jul 30 06:08:47 2009 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 30 Jul 2009 08:08:47 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 on Lenny In-Reply-To: <1248931166.28811.5.camel@oneil.pgroupe.net> References: <1247121503.13252.2.camel@oneil.pgroupe.net> <4A55A6D0.3000202@pu-pm.univ-fcomte.fr> <1248931166.28811.5.camel@oneil.pgroupe.net> Message-ID: <1248934127.28790.0.camel@scorpion.multitel.be> Le jeudi 30 juillet 2009 ? 09:19 +0400, Beno?t Laniel a ?crit : > Le jeudi 09 juillet 2009 ? 10:14 +0200, Eugen Dedu a ?crit : > > Thanks! Could you upload it to http://backports.org/dokuwiki/doku.php ? > > Thus is becomes "official". > > I rebuilt the packages using cowbuilder. I also built ekiga with g++-4.2 > so everything has been built with lenny paackages. You can find the > files here : http://blaniel.free.fr/debian/lenny-backports/ > > I think it should be ok for inclusion in lenny-backports, however I > don't have a lot of time these days but I will do my best to make them > available as soon as possible. > Thank you Beno?t! Maybe Yannick or Eugen can mirror them or link to them... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dlw_insulin at hotmail.com Thu Jul 30 10:13:52 2009 From: dlw_insulin at hotmail.com (D Webb) Date: Thu, 30 Jul 2009 10:13:52 +0000 Subject: [Ekiga-list] unsubscribe In-Reply-To: <1248934127.28790.0.camel@scorpion.multitel.be> References: <1247121503.13252.2.camel@oneil.pgroupe.net> <4A55A6D0.3000202@pu-pm.univ-fcomte.fr> <1248931166.28811.5.camel@oneil.pgroupe.net> <1248934127.28790.0.camel@scorpion.multitel.be> Message-ID: unsubscribe _________________________________________________________________ Bing? brings you maps, menus, and reviews organized in one place. Try it now. http://www.bing.com/search?q=restaurants&form=MLOGEN&publ=WLHMTAG&crea=TXT_MLOGEN_Local_Local_Restaurants_1x1 -------------- next part -------------- An HTML attachment was scrubbed... URL: From fboiteux at calistel.com Fri Jul 31 09:57:26 2009 From: fboiteux at calistel.com (=?UTF-8?B?RnLDqWTDqXJpYw==?= Boiteux) Date: Fri, 31 Jul 2009 11:57:26 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 fails to use wy USB webcam from Eeepc Message-ID: <20090731115726.722233f4@Prem6s.lanvoc> Hello, I have an Asus Eeepc 1002HA with an integrated webcam. I've installed a Debian Lenny (stable) system, with a newer 2.6.30 kernel, and the webcam, an USB one, is well detected : $ lsusb ... Bus 001 Device 004: ID 05e3:0505 Genesys Logic, Inc. ... [ 8.741399] Linux video capture interface: v2.00 [ 8.768170] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05e3:0505) [ 8.858449] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 8.911935] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9 [ 8.916199] usbcore: registered new interface driver uvcvideo [ 8.918638] USB Video Class driver (v0.1.0) [ The camera works with applications like 'camorama' or 'cheese', but doesn't work with 'ekiga' (nor 'xawtv') : In Ekiga, it's well detected, but it can't use it, so displaying bouncing ball instead. I've tried to build the latest released version of Ekiga, the 3.2.5, from Debian Unstable's package source on Lenny (along with new ptlib and opal libraries), the new Ekiga doesn't work either with this camera. I've search a bit about Ekiga and this camera, and other Debian Eeepc users told me they have the same problem (and are interested resolving it !) Here is a part of the debug trace of old Lenny Ekiga (2.0.12), referring to the webcam initialization : 2009/07/29 11:28:27.815 0:01.838 Detecting V4L2 devices 2009/07/29 11:28:27.816 0:01.839 PV4L2Plugin detected device metadata at /sys/class/video4linux/ 2009/07/29 11:28:27.840 0:01.863 Opal Garbage:0xb569db90 SIP MONITOR:transactions=0,connections=0 2009/07/29 11:28:27.896 0:01.919 PVidInDev Open() videoFd:-1 2009/07/29 11:28:27.896 0:01.919 PVidInDev Close() videoFd:-1 started:0 2009/07/29 11:28:27.896 0:01.920 Detecting V4L2 devices 2009/07/29 11:28:27.897 0:01.920 PV4L2Plugin detected device metadata at /sys/class/video4linux/ 2009/07/29 11:28:27.978 0:02.001 PVidInDev Open() devName:/dev/video0 videoFd:-1 2009/07/29 11:28:27.997 0:02.021 VideoInputDevice S_STD failed : Argument invalide 2009/07/29 11:28:28.063 0:02.086 PVidDev SetColourFormatConverter success for native YUV420P 2009/07/29 11:28:28.092 0:02.115 PVidDev SetFrameSize to 352x288 2009/07/29 11:28:28.267 0:02.290 PreviewManager Starting Preview I didn't find equivalent error messages in Ekiga 3.2.5's log. What could I do to help you, Ekiga devs, to make it work with this camera?? Thanks for any tip ! Fred. From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Jul 31 12:06:04 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 31 Jul 2009 14:06:04 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 fails to use wy USB webcam from Eeepc In-Reply-To: <20090731115726.722233f4@Prem6s.lanvoc> References: <20090731115726.722233f4@Prem6s.lanvoc> Message-ID: <4A72DE2C.9020908@pu-pm.univ-fcomte.fr> Hi Fr?d?ric, 1. There was a very recent commit which has a fix for some cameras (http://sourceforge.net/tracker/?func=detail&aid=2821189&group_id=204472&atid=989748), maybe it fixes for you, could you test the latest svn/git instead of 3.2.5? 2. Could you also install libv4l (not available in stable I think) and recompile everything (ptlib/opal/ekiga)? Thanks, Eugen Fr?d?ric Boiteux wrote: > Hello, > > I have an Asus Eeepc 1002HA with an integrated webcam. I've installed > a Debian Lenny (stable) system, with a newer 2.6.30 kernel, and the > webcam, an USB one, is well detected : > > $ lsusb > ... > Bus 001 Device 004: ID 05e3:0505 Genesys Logic, Inc. > ... > > [ 8.741399] Linux video capture interface: v2.00 > [ 8.768170] uvcvideo: Found UVC 1.00 device USB 2.0 Camera > (05e3:0505) [ 8.858449] input: HDA Digital PCBeep > as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 8.911935] input: > USB 2.0 Camera > as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9 > [ 8.916199] usbcore: registered new interface driver uvcvideo > [ 8.918638] USB Video Class driver (v0.1.0) [ > > The camera works with applications like 'camorama' or 'cheese', but > doesn't work with 'ekiga' (nor 'xawtv') : In Ekiga, it's well detected, > but it can't use it, so displaying bouncing ball instead. > > I've tried to build the latest released version of Ekiga, the 3.2.5, > from Debian Unstable's package source on Lenny (along with new ptlib > and opal libraries), the new Ekiga doesn't work either with this camera. > > I've search a bit about Ekiga and this camera, and other Debian Eeepc > users told me they have the same problem (and are interested resolving > it !) > > Here is a part of the debug trace of old Lenny Ekiga (2.0.12), referring to the webcam initialization : > > 2009/07/29 11:28:27.815 0:01.838 Detecting V4L2 devices > 2009/07/29 11:28:27.816 0:01.839 PV4L2Plugin detected device metadata at /sys/class/video4linux/ > 2009/07/29 11:28:27.840 0:01.863 Opal Garbage:0xb569db90 SIP MONITOR:transactions=0,connections=0 > 2009/07/29 11:28:27.896 0:01.919 PVidInDev Open() videoFd:-1 > 2009/07/29 11:28:27.896 0:01.919 PVidInDev Close() videoFd:-1 started:0 > 2009/07/29 11:28:27.896 0:01.920 Detecting V4L2 devices > 2009/07/29 11:28:27.897 0:01.920 PV4L2Plugin detected device metadata at /sys/class/video4linux/ > 2009/07/29 11:28:27.978 0:02.001 PVidInDev Open() devName:/dev/video0 videoFd:-1 > 2009/07/29 11:28:27.997 0:02.021 VideoInputDevice S_STD failed : Argument invalide > 2009/07/29 11:28:28.063 0:02.086 PVidDev SetColourFormatConverter success for native YUV420P > 2009/07/29 11:28:28.092 0:02.115 PVidDev SetFrameSize to 352x288 > 2009/07/29 11:28:28.267 0:02.290 PreviewManager Starting Preview > > I didn't find equivalent error messages in Ekiga 3.2.5's log. > > > What could I do to help you, Ekiga devs, to make it work with this > camera ? > > Thanks for any tip ! > > Fred. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Jul 31 13:02:36 2009 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 31 Jul 2009 15:02:36 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 on Lenny In-Reply-To: <1248931166.28811.5.camel@oneil.pgroupe.net> References: <1247121503.13252.2.camel@oneil.pgroupe.net> <4A55A6D0.3000202@pu-pm.univ-fcomte.fr> <1248931166.28811.5.camel@oneil.pgroupe.net> Message-ID: <4A72EB6C.6070204@pu-pm.univ-fcomte.fr> Beno?t Laniel wrote: > Le jeudi 09 juillet 2009 ? 10:14 +0200, Eugen Dedu a ?crit : >> Thanks! Could you upload it to http://backports.org/dokuwiki/doku.php ? >> Thus is becomes "official". > > I rebuilt the packages using cowbuilder. I also built ekiga with g++-4.2 > so everything has been built with lenny paackages. You can find the > files here : http://blaniel.free.fr/debian/lenny-backports/ Do you have the line to be added to /etc/apt/sources.list? Or should the user install them manually (with dpkg)? > I think it should be ok for inclusion in lenny-backports, however I > don't have a lot of time these days but I will do my best to make them > available as soon as possible. -- Eugen From fboiteux at calistel.com Fri Jul 31 13:10:02 2009 From: fboiteux at calistel.com (=?UTF-8?B?RnLDqWTDqXJpYw==?= Boiteux) Date: Fri, 31 Jul 2009 15:10:02 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 fails to use wy USB webcam from Eeepc In-Reply-To: <4A72DE2C.9020908@pu-pm.univ-fcomte.fr> References: <20090731115726.722233f4@Prem6s.lanvoc> <4A72DE2C.9020908@pu-pm.univ-fcomte.fr> Message-ID: <20090731151002.4a71b0c0@Prem6s.lanvoc> Le Fri, 31 Jul 2009 14:06:04 +0200, Eugen Dedu a ?crit : > Hi Fr?d?ric, > > 1. There was a very recent commit which has a fix for some cameras > (http://sourceforge.net/tracker/?func=detail&aid=2821189&group_id=204472&atid=989748), > maybe it fixes for you, could you test the latest svn/git instead of > 3.2.5? 2. Could you also install libv4l (not available in stable I > think) and recompile everything (ptlib/opal/ekiga)? > > Thanks, > Eugen Hi Eugen, I've already "backported" libv4l to be able to build Debian's ekiga package. I'll try to compile the svn/git version and tell you what it does. Fred From dsandras at seconix.com Fri Jul 31 17:56:34 2009 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 31 Jul 2009 19:56:34 +0200 Subject: [Ekiga-list] Leaving Message-ID: <1249062994.3844.70.camel@scorpion.multitel.be> Hi, I'm leaving for 2 full weeks. Just for information to all those people who were debugging things with me by e-mail :) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ Be IP : http://www.beip.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From gerhard_pircher at gmx.net Fri Jul 31 18:01:00 2009 From: gerhard_pircher at gmx.net (Gerhard Pircher) Date: Fri, 31 Jul 2009 20:01:00 +0200 Subject: [Ekiga-list] Ekiga 3.2.5 on Lenny In-Reply-To: <4A72EB6C.6070204@pu-pm.univ-fcomte.fr> References: <1247121503.13252.2.camel@oneil.pgroupe.net> <4A55A6D0.3000202@pu-pm.univ-fcomte.fr> <1248931166.28811.5.camel@oneil.pgroupe.net> <4A72EB6C.6070204@pu-pm.univ-fcomte.fr> Message-ID: <20090731180100.141240@gmx.net> -------- Original-Nachricht -------- > Datum: Fri, 31 Jul 2009 15:02:36 +0200 > Von: Eugen Dedu > An: Ekiga mailing list > Betreff: Re: [Ekiga-list] Ekiga 3.2.5 on Lenny > Beno?t Laniel wrote: > > Le jeudi 09 juillet 2009 ? 10:14 +0200, Eugen Dedu a ?crit : > >> Thanks! Could you upload it to http://backports.org/dokuwiki/doku.php > ? > >> Thus is becomes "official". > > > > I rebuilt the packages using cowbuilder. I also built ekiga with > > g++-4.2 so everything has been built with lenny paackages. You can > > find the files here : http://blaniel.free.fr/debian/lenny-backports/ > > Do you have the line to be added to /etc/apt/sources.list? Or should > the user install them manually (with dpkg)? I put the line in /etc/apt/sources.list. But the i386 non-debug Debian package seems to be missing in the repository. Gerhard -- GRATIS f?r alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01 From mike at cchtml.com Fri Jul 31 18:22:11 2009 From: mike at cchtml.com (Michael Cronenworth) Date: Fri, 31 Jul 2009 13:22:11 -0500 Subject: [Ekiga-list] Leaving In-Reply-To: <1249062994.3844.70.camel@scorpion.multitel.be> References: <1249062994.3844.70.camel@scorpion.multitel.be> Message-ID: <4A733653.6060309@cchtml.com> Damien Sandras on 07/31/2009 12:56 PM wrote: > > I'm leaving for 2 full weeks. > Does the second person who can maintain ekiga.net (SIP) know? Are they going to be around if maintenance is required? Eg. Restarting the SIP server.