From D.Bannon at vpac.org Mon Sep 1 00:59:21 2008 From: D.Bannon at vpac.org (David Bannon) Date: Mon, 01 Sep 2008 10:59:21 +1000 Subject: [Ekiga-list] Snapshot issues on Ubuntu ? In-Reply-To: <1220044005.27885.92.camel@achille> References: <1219823857.8939.18.camel@dbannon-laptop> <1219825673.27885.17.camel@achille> <1219903767.6167.88.camel@dbannon-laptop> <1219919560.27885.45.camel@achille> <1220044005.27885.92.camel@achille> Message-ID: <1220230761.6222.69.camel@dbannon-laptop> Thanks Yannick, that now installs cleanly using apt-get. Does not work for me from here in the office but maybe I'll test it at home tonight before saying there is something wrong. Still no way to see if STUN is configured in or not, previous versions did work from home... David On Fri, 2008-08-29 at 23:06 +0200, yannick wrote: > Le jeudi 28 ao?t 2008 ? 12:32 +0200, yannick a ?crit : > > Le jeudi 28 ao?t 2008 ? 16:09 +1000, David Bannon a ?crit : > > > > > > Ubuntu Snapshot issues ? > > > > > > I think a new snapshot (for ubuntu) may have appeared in the last 24 > > > hours and the packaging may have gone wrong ! > > > > Indeed. > > > > The packages are good, issue is with the repository which confuse > > distros. I'll fix this as soon as possible. > > Fixed. > Directions: http://snapshots.ekiga.net/ > > Best regard, > Yannick > > > > > If you're in hurry, you can use my play-field here: > > https://launchpad.net/~sevmek/+archive > > (and remove the snapshot.ekiga.net line from your repositories list) > > > > Thank you for reporting, > > Best regards, > > Yannick > > > > > > > > dbannon at dbannon-laptop:~$ sudo apt-get install ekiga-snapshot > > > [sudo] password for dbannon: > > > Reading package lists... Done > > > Building dependency tree > > > Reading state information... Done > > > Some packages could not be installed. This may mean that you have > > > requested an impossible situation or if you are using the unstable > > > distribution that some required packages have not yet been created > > > or been moved out of Incoming. > > > > > > Since you only requested a single operation it is extremely likely that > > > the package is simply not installable and a bug report against > > > that package should be filed. > > > The following information may help to resolve the situation: > > > > > > The following packages have unmet dependencies: > > > ekiga-snapshot: Depends: libopal-3.3 (= 20080827v01hardy4) but it is > > > not going to be installed > > > Depends: libpt-2.3 (= 20080827v01hardy4) but it is not > > > going to be installed > > > Depends: libpt-2.3-plugins-alsa (= 20080827v01hardy4) > > > but it is not going to be installed or > > > libpt-2.3-plugins-oss (= 20080827v01hardy4) > > > but it is not going to be installed > > > Depends: libpt-2.3-plugins-v4l2 (= 20080827v01hardy4) > > > but it is not going to be installed or > > > libpt-2.3-plugins-v4l (= 20080827v01hardy4) > > > but it is not going to be installed or > > > libpt-2.3-plugins-avc (= 20080827v01hardy4) > > > but it is not going to be installed or > > > libpt-2.3-plugins-dc (= 20080827v01hardy4) > > > but it is not going to be installed > > > E: Broken packages > > > > > > > > > > > > So I tried installing the missing packages by hand and hit - > > > > > > dbannon at dbannon-laptop:~$ sudo apt-get install libspeexdsp1 > > > Reading package lists... Done > > > Building dependency tree > > > Reading state information... Done > > > Package libspeexdsp1 is not available, but is referred to by another > > > package. > > > This may mean that the package is missing, has been obsoleted, or > > > is only available from another source > > > E: Package libspeexdsp1 has no installation candidate > > > > > > > > > David > > > > > > > > > > > -- > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > sip:yannick at ekiga.net > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From edunagin at gmail.com Mon Sep 1 22:22:56 2008 From: edunagin at gmail.com (Edward Dunagin) Date: Mon, 1 Sep 2008 16:22:56 -0600 Subject: [Ekiga-list] Loading error Message-ID: <2af451740809011522q2f6b46a4q82a7a2a13bb85119@mail.gmail.com> I am running ekiga 2.0.9 SVN and received this error: edunagin at HighNet2-WOW2:~$ The program 'ekiga' received an X Window System error. This probably reflects a bug in the program. The error was 'BadGC (invalid GC parameter)'. (Details: serial 43 error_code 13 request_code 141 minor_code 19) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) assert.cxx(108) PWLib Assertion fail: Function pthread_mutex_lock failed, file tlibthrd.cxx, line 1271 Assertion fail: Function pthread_mutex_lock failed, file tlibthrd.cxx, line 1271 I will run a core dump and save it if wanted. Edward Dunagin-Dunigan Bozeman, MT 59718 mobile 406-570-0992 Land line 406-556-7282 EKIGA: sip:edunagin at ekiga.net http://doas.montanalinux.org From dsandras at seconix.com Tue Sep 2 11:50:39 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 02 Sep 2008 13:50:39 +0200 Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! Message-ID: <1220356239.4430.10.camel@scorpion.multitel.be> This is the next generation of Ekiga. A major rewrite of Ekiga, and of OPAL, the main underlying library. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/2.9 Dependancies like OPAL and PWLIB are available at: ftp://ftp.gnome.org/pub/gnome/sources/opal/3.3 ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.3 OPAL and PTLIB *external* dependancies have been updated. They are TRUNK snapshots. * What's changed ? ================== - Everything... (please see ChangeLog). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From razametal at gmail.com Tue Sep 2 16:15:19 2008 From: razametal at gmail.com (RazaMetaL | Only The Good Die Young) Date: Tue, 2 Sep 2008 11:15:19 -0500 Subject: [Ekiga-list] How to add new sip accounts Message-ID: Hi, I'm using ekiga 2.9.0 (SVN version) and do not have any button to create a new SIP account. http://wiki.ekiga.org/index.php/Managing_VOIP_Accounts Best regards, -- Linux User: 255902 Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html From michel.memeteau at gmail.com Tue Sep 2 16:22:24 2008 From: michel.memeteau at gmail.com (michel memeteau) Date: Tue, 2 Sep 2008 18:22:24 +0200 Subject: [Ekiga-list] How to add new sip accounts In-Reply-To: References: Message-ID: Hi don't you have a Menu upper left like here ? http://wiki.ekiga.org/index.php/Documentation#Managing_VoIP_Services On Tue, Sep 2, 2008 at 6:15 PM, RazaMetaL | Only The Good Die Young < razametal at gmail.com> wrote: > Hi, > > I'm using ekiga 2.9.0 (SVN version) and do not have any button to > create a new SIP account. > > > http://wiki.ekiga.org/index.php/Managing_VOIP_Accounts > > > Best regards, > > -- > Linux User: 255902 > > Please avoid sending me Word or PowerPoint attachments. > See http://www.gnu.org/philosophy/no-word-attachments.html > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0874763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at gizmoproject.com jabber/GoogleTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From razametal at gmail.com Tue Sep 2 16:33:50 2008 From: razametal at gmail.com (RazaMetaL | Only The Good Die Young) Date: Tue, 2 Sep 2008 11:33:50 -0500 Subject: [Ekiga-list] How to add new sip accounts In-Reply-To: References: Message-ID: On Tue, Sep 2, 2008 at 11:22 AM, michel memeteau wrote: > Hi don't you have a Menu upper left like here ? > Yes.... I can add accounts right now. Saludos, -- Linux User: 255902 Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html From sergstesh at yahoo.com Tue Sep 2 16:43:26 2008 From: sergstesh at yahoo.com (Sergei Steshenko) Date: Tue, 2 Sep 2008 09:43:26 -0700 (PDT) Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! In-Reply-To: <1220356239.4430.10.camel@scorpion.multitel.be> Message-ID: <17343.30892.qm@web35204.mail.mud.yahoo.com> --- On Tue, 9/2/08, Damien Sandras wrote: > From: Damien Sandras > Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! > To: gnome-announce-list at gnome.org > Cc: release-team at gnome.org, "Ekiga mailing list" , ekiga-devel-list at gnome.org > Date: Tuesday, September 2, 2008, 4:50 AM > This is the next generation of Ekiga. A major rewrite of > Ekiga, and of > OPAL, the main underlying library. > > > * What is it ? > ============== > > Ekiga is a free Voice over IP softphone allowing you to do > free calls > over the Internet. > > Ekiga is the first Open Source application to support both > H.323 and > SIP, as well as audio and video. Ekiga was formerly known > as > GnomeMeeting. > > More information can be found at http://www.ekiga.org > > > * Where to get it ? > =================== > > Ekiga is available at: > ftp://ftp.gnome.org/pub/gnome/sources/ekiga/2.9 > > Dependancies like OPAL and PWLIB are available at: > ftp://ftp.gnome.org/pub/gnome/sources/opal/3.3 > ftp://ftp.gnome.org/pub/gnome/sources/ptlib/2.3 > > OPAL and PTLIB *external* dependancies have been updated. > They are TRUNK > snapshots. > > > * What's changed ? > ================== > > - Everything... (please see ChangeLog). > > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list Is there a URL to the Changelog ? Thanks, Sergei. From oisin.feeley at gmail.com Tue Sep 2 17:31:57 2008 From: oisin.feeley at gmail.com (Oisin Feeley) Date: Tue, 2 Sep 2008 13:31:57 -0400 Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! In-Reply-To: <17343.30892.qm@web35204.mail.mud.yahoo.com> References: <1220356239.4430.10.camel@scorpion.multitel.be> <17343.30892.qm@web35204.mail.mud.yahoo.com> Message-ID: On Tue, Sep 2, 2008 at 12:43 PM, Sergei Steshenko wrote: > > > > --- On Tue, 9/2/08, Damien Sandras wrote: > > * What's changed ? > > ================== > > Is there a URL to the Changelog ? > > Thanks, > Sergei. I wondered that too. The closest I can find are these two links: http://wiki.ekiga.org/index.php/Roadmap_to_3.00 http://wiki.ekiga.org/index.php/Planning_3_0 Best wishes, Oisin Feeley -------------- next part -------------- An HTML attachment was scrubbed... URL: From fabrice at alphonso.dyndns.org Tue Sep 2 17:35:16 2008 From: fabrice at alphonso.dyndns.org (Fabrice ALPHONSO) Date: Tue, 02 Sep 2008 19:35:16 +0200 Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! In-Reply-To: References: <1220356239.4430.10.camel@scorpion.multitel.be> <17343.30892.qm@web35204.mail.mud.yahoo.com> Message-ID: <1220376916.11659.7.camel@balder.walhalla> Have a look at : http://svn.gnome.org/viewvc/ekiga/tags/EKIGA_2_9_90/ChangeLog?revision=6798&view=markup hth, Fabrice Le mardi 02 septembre 2008 ? 13:31 -0400, Oisin Feeley a ?crit : > > > On Tue, Sep 2, 2008 at 12:43 PM, Sergei Steshenko > wrote: > > > > --- On Tue, 9/2/08, Damien Sandras > wrote: > > > > * What's changed ? > > ================== > > > Is there a URL to the Changelog ? > > Thanks, > Sergei. > > I wondered that too. The closest I can find are these two links: > > > http://wiki.ekiga.org/index.php/Roadmap_to_3.00 > http://wiki.ekiga.org/index.php/Planning_3_0 > > Best wishes, > Oisin Feeley > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- ALPHONSO Fabrice http://alphonso.dyndns.org/blog/ http://alphonso.dyndns.org/gallery2/ sip:fabrice at ekiga.net From sergstesh at yahoo.com Tue Sep 2 18:04:16 2008 From: sergstesh at yahoo.com (Sergei Steshenko) Date: Tue, 2 Sep 2008 11:04:16 -0700 (PDT) Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! In-Reply-To: <1220376916.11659.7.camel@balder.walhalla> Message-ID: <105828.77177.qm@web35203.mail.mud.yahoo.com> --- On Tue, 9/2/08, Fabrice ALPHONSO wrote: > From: Fabrice ALPHONSO > Subject: Re: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! > To: "Ekiga mailing list" > Date: Tuesday, September 2, 2008, 10:35 AM > Have a look at : > > http://svn.gnome.org/viewvc/ekiga/tags/EKIGA_2_9_90/ChangeLog?revision=6798&view=markup > > hth, > > Fabrice > > Le mardi 02 septembre 2008 ? 13:31 -0400, Oisin Feeley a > ?crit : > > > > > > On Tue, Sep 2, 2008 at 12:43 PM, Sergei Steshenko > > wrote: > > > > > > > > --- On Tue, 9/2/08, Damien Sandras > > > wrote: > > > > > > > * What's changed ? > > > ================== > > > > > > Is there a URL to the Changelog ? > > > > Thanks, > > Sergei. > > > > I wondered that too. The closest I can find are these > two links: > > > > > > http://wiki.ekiga.org/index.php/Roadmap_to_3.00 > > http://wiki.ekiga.org/index.php/Planning_3_0 > > > > Best wishes, > > Oisin Feeley > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > ALPHONSO Fabrice > > http://alphonso.dyndns.org/blog/ > http://alphonso.dyndns.org/gallery2/ > sip:fabrice at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list Regarding http://svn.gnome.org/viewvc/ekiga/tags/EKIGA_2_9_90/ChangeLog?revision=6798&view=markup - Firefox 3 under Linux shows an empty page - background color only, no text. Thanks, Sergei. From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Sep 2 18:15:06 2008 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 02 Sep 2008 20:15:06 +0200 Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! In-Reply-To: <105828.77177.qm@web35203.mail.mud.yahoo.com> References: <105828.77177.qm@web35203.mail.mud.yahoo.com> Message-ID: <48BD82AA.4000203@pu-pm.univ-fcomte.fr> Sergei Steshenko wrote: > > > --- On Tue, 9/2/08, Fabrice ALPHONSO wrote: > >> From: Fabrice ALPHONSO >> Subject: Re: [Ekiga-list] [ANNOUNCE] Ekiga 2.9.90 aka Ekiga 3.00 BETA1 released ! >> To: "Ekiga mailing list" >> Date: Tuesday, September 2, 2008, 10:35 AM >> Have a look at : >> >> http://svn.gnome.org/viewvc/ekiga/tags/EKIGA_2_9_90/ChangeLog?revision=6798&view=markup >> >> hth, >> >> Fabrice >> >> Le mardi 02 septembre 2008 ? 13:31 -0400, Oisin Feeley a >> ?crit : >>> >>> On Tue, Sep 2, 2008 at 12:43 PM, Sergei Steshenko >>> wrote: >>> >>> >>> >>> --- On Tue, 9/2/08, Damien Sandras >> >>> wrote: >>> >>> >>> > * What's changed ? >>> > ================== >>> >>> >>> Is there a URL to the Changelog ? >>> >>> Thanks, >>> Sergei. >>> >>> I wondered that too. The closest I can find are these >> two links: >>> >>> >>> http://wiki.ekiga.org/index.php/Roadmap_to_3.00 >>> http://wiki.ekiga.org/index.php/Planning_3_0 >>> >>> Best wishes, >>> Oisin Feeley >>> >>> _______________________________________________ >>> ekiga-list mailing list >>> ekiga-list at gnome.org >>> http://mail.gnome.org/mailman/listinfo/ekiga-list >> -- >> ALPHONSO Fabrice >> >> http://alphonso.dyndns.org/blog/ >> http://alphonso.dyndns.org/gallery2/ >> sip:fabrice at ekiga.net >> >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list > > Regarding > > http://svn.gnome.org/viewvc/ekiga/tags/EKIGA_2_9_90/ChangeLog?revision=6798&view=markup > > - Firefox 3 under Linux shows an empty page - background color only, no > text. There is a problem with svn.gnome.org site. I suppose it will be fixed soon. Regards, -- Eugen Dedu From emanuele.b at automaonline.com Wed Sep 3 12:48:02 2008 From: emanuele.b at automaonline.com (emanuele bottegoni) Date: Wed, 03 Sep 2008 14:48:02 +0200 Subject: [Ekiga-list] Infos Message-ID: hello guys, I'd like to know what kind of video Codec Ekiga 2.0.11 (windows release) is supporting because I'm trying to establish a communication between it and a SIP videoDooor phone, that supports Alaw,Ulaw and H264. Is this the 2.0.11 the last windows stable release? Furthermore I'd like to know if some of the last Ekiga versions can support SIP direct Call (P2P),in this way I can Bypass the Asterisk server, for example, and make calls without a PBX presence. Thanks for all Best Regards Emanuele From michel.memeteau at gmail.com Wed Sep 3 13:09:51 2008 From: michel.memeteau at gmail.com (michel memeteau) Date: Wed, 3 Sep 2008 15:09:51 +0200 Subject: [Ekiga-list] Infos In-Reply-To: References: Message-ID: On Wed, Sep 3, 2008 at 2:48 PM, emanuele bottegoni wrote: > I'm trying to establish a communication between it > and a SIP videoDooor phone, that supports Alaw,Ulaw and H264. You need beta 3.0 to use H264 : no builds for Win AFAIK > Is this the 2.0.11 the last windows stable release? I thinlk it's 2.0.12 > Furthermore I'd like to know if some of the last Ekiga versions can > support SIP direct Call (P2P),in this way I can Bypass the Asterisk > server, for example, and make calls without a PBX presence. Yes It's possible -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0874763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at gizmoproject.com jabber/GoogleTalk : xmpp:freechelmi at jabber.fr From emanuele.b at automaonline.com Wed Sep 3 13:18:27 2008 From: emanuele.b at automaonline.com (emanuele bottegoni) Date: Wed, 03 Sep 2008 15:18:27 +0200 Subject: [Ekiga-list] Infos In-Reply-To: References: Message-ID: Thanks, I'll try to use the beta 3 concerning the use of H264. What about the SIP direct Call in which version is available? Furthermore,which is the correct format of SIP address I have to insert? sip:....@(IP of the host):5060 ? thanks for all Emanuele -----Original Message----- From: "michel memeteau" To: "Ekiga mailing list" Date: Wed, 3 Sep 2008 15:09:51 +0200 Subject: Re: [Ekiga-list] Infos > On Wed, Sep 3, 2008 at 2:48 PM, emanuele bottegoni > wrote: > > I'm trying to establish a communication between it > > and a SIP videoDooor phone, that supports Alaw,Ulaw and H264. > > You need beta 3.0 to use H264 : no builds for Win AFAIK > > > Is this the 2.0.11 the last windows stable release? > > I thinlk it's 2.0.12 > > > Furthermore I'd like to know if some of the last Ekiga versions can > > support SIP direct Call (P2P),in this way I can Bypass the Asterisk > > server, for example, and make calls without a PBX presence. > > Yes It's possible > -- > %<------------------------------------------------------->% > Michel memeteau > Blog 0.2 : http://memeteau.free.fr > Fixe : 0874763294 Mobile : 0624808051 > VOIP | Visio: sip:freechelmi at gizmoproject.com > jabber/GoogleTalk : xmpp:freechelmi at jabber.fr > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From dsandras at seconix.com Wed Sep 3 13:49:54 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 03 Sep 2008 15:49:54 +0200 Subject: [Ekiga-list] Infos In-Reply-To: References: Message-ID: <1220449794.4821.61.camel@scorpion.multitel.be> Le mercredi 03 septembre 2008 ? 15:18 +0200, emanuele bottegoni a ?crit : > Thanks, > > I'll try to use the beta 3 concerning the use of H264. > What about the SIP direct Call in which version is available? > Furthermore,which is the correct format of SIP address I have to insert? > sip:....@(IP of the host):5060 ? > Direct ip calls do not make sense. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From emanuele.b at automaonline.com Wed Sep 3 13:58:23 2008 From: emanuele.b at automaonline.com (emanuele bottegoni) Date: Wed, 03 Sep 2008 15:58:23 +0200 Subject: [Ekiga-list] Infos In-Reply-To: <1220449794.4821.61.camel@scorpion.multitel.be> References: <1220449794.4821.61.camel@scorpion.multitel.be> Message-ID: Hi, Why direct SIP calls have don't make sense? For example I'm involving in Home automation and in this kind of application not always is possible to put a PBX server even if the place is ethernet cabled. So,as intercoms SIP based services,We can consider the opportunity tou SIP direct calls. I've noticed that SJphone can support this feature.I'd like to know how with Ekiga is possible to realize this kind of aaudiuo video sessions. Thanks Emanuele > Le mercredi 03 septembre 2008 ?? 15:18 +0200, emanuele bottegoni a > ??crit : > > Thanks, > > > > I'll try to use the beta 3 concerning the use of H264. > > What about the SIP direct Call in which version is available? > > Furthermore,which is the correct format of SIP address I have to > insert? > > sip:....@(IP of the host):5060 ? > > > > Direct ip calls do not make sense. > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From dsandras at seconix.com Wed Sep 3 14:14:06 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 03 Sep 2008 16:14:06 +0200 Subject: [Ekiga-list] Infos In-Reply-To: References: <1220449794.4821.61.camel@scorpion.multitel.be> Message-ID: <1220451246.4821.63.camel@scorpion.multitel.be> Le mercredi 03 septembre 2008 ? 15:58 +0200, emanuele bottegoni a ?crit : > Hi, > > Why direct SIP calls have don't make sense? > For example I'm involving in Home automation and in this kind of > application not always is possible to put a PBX server even if the place > is ethernet cabled. > So,as intercoms SIP based services,We can consider the opportunity tou SIP > direct calls. > I've noticed that SJphone can support this feature.I'd like to know how > with Ekiga is possible to realize this kind of aaudiuo video sessions. If you dial the IP address, it should work. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From DAVE.HIGTON at nice.com Wed Sep 3 14:18:39 2008 From: DAVE.HIGTON at nice.com (Dave Higton) Date: Wed, 3 Sep 2008 15:18:39 +0100 Subject: [Ekiga-list] Infos In-Reply-To: References: <1220449794.4821.61.camel@scorpion.multitel.be> Message-ID: I feel I have to add a "me too": direct IP calls absolutely do make sense. I could call someone else on my LAN (which could be quite large), or on my VPN (which could of course be even larger). I don't want to have to install an IPBX just to avoid direct IP calls. SIP itself supports direct calls, and I believe that all SIP UAs should too. Dave > emanuele bottegoni wrote: > > Hi, > > Why direct SIP calls have don't make sense? > For example I'm involving in Home automation and in this kind of > application not always is possible to put a PBX server even > if the place > is ethernet cabled. > So,as intercoms SIP based services,We can consider the > opportunity tou SIP > direct calls. > I've noticed that SJphone can support this feature.I'd like > to know how > with Ekiga is possible to realize this kind of aaudiuo video sessions. > > Thanks > Emanuele > > > > Le mercredi 03 septembre 2008 ?? 15:18 +0200, emanuele bottegoni a > > ??crit : > > > Thanks, > > > > > > I'll try to use the beta 3 concerning the use of H264. > > > What about the SIP direct Call in which version is available? > > > Furthermore,which is the correct format of SIP address I have to > > insert? > > > sip:....@(IP of the host):5060 ? > > > > > > > Direct ip calls do not make sense. > > -- > > Damien Sandras ************************************************************************************************************************************************************************************************************************************************* NICE CTI Systems UK Limited ("NICE") is registered in England under company number, 3403044. The registered office of NICE is at Tollbar Way, Hedge End, Southampton, Hampshire SO30 2ZP. Confidentiality: This communication and any attachments are intended for the above-named persons only and may be confidential and/or legally privileged. Any opinions expressed in this communication are not necessarily those of NICE. If this communication has come to you in error you must take no action based on it, nor must you copy or show it to anyone; please delete/destroy and inform the sender by e-mail immediately. Monitoring: NICE may monitor incoming and outgoing e-mails. Viruses: Although we have taken steps toward ensuring that this e-mail and attachments are free from any virus, we advise that in keeping with good computing practice the recipient should ensure they are actually virus free. **************************************************************************************************************************************************************************************************************************************************** From emanuele.b at automaonline.com Wed Sep 3 14:50:18 2008 From: emanuele.b at automaonline.com (emanuele bottegoni) Date: Wed, 03 Sep 2008 16:50:18 +0200 Subject: [Ekiga-list] Installation Error Of Ekiga 3 Beta 1 Message-ID: Hello users, I'm working with Ubuntu Hardy 8.04 and I've downloaded the last Ekiga 3 Beta 1. Compiling Ptlib,then Opal and then Ekiga 3 I haven't errors. But when I launch, from shell, under /usr/local/bin, ./ekiga I Obtain the following error: ema at ubuntu:/usr/local/bin$ ./ekiga ./ekiga: error while loading shared libraries: libopal_linux_x86_r.so.3.3-beta1: cannot open shared object file: No such file or directory I've checked after that under Opal Installation that file is present, in fact when I've launched Make Install I've obtained this report: usr/bin/install -c -m 755 lib/libopal_linux_x86_r.so.3.3-beta1 /usr/local//lib /usr/bin/install -c -m 444 opal.pc /usr/local//lib/pkgconfig ln -snf libopal_linux_x86_r.so.3.3-beta1 \ /usr/local//lib/libopal_linux_x86_r.so.3.3 Anyone knows how is possible to fix this error? Thanks For All Emanuele From dsandras at seconix.com Wed Sep 3 15:01:45 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 03 Sep 2008 17:01:45 +0200 Subject: [Ekiga-list] Installation Error Of Ekiga 3 Beta 1 In-Reply-To: References: Message-ID: <1220454105.4821.70.camel@scorpion.multitel.be> Le mercredi 03 septembre 2008 ? 16:50 +0200, emanuele bottegoni a ?crit : > Hello users, > > I'm working with Ubuntu Hardy 8.04 and I've downloaded the last Ekiga 3 > Beta 1. > Compiling Ptlib,then Opal and then Ekiga 3 I haven't errors. > But when I launch, from shell, under /usr/local/bin, ./ekiga I Obtain the > following error: > > ema at ubuntu:/usr/local/bin$ ./ekiga > ./ekiga: error while loading shared libraries: > libopal_linux_x86_r.so.3.3-beta1: cannot open shared object file: No such > file or directory > > > I've checked after that under Opal Installation that file is present, in > fact when I've launched Make Install I've obtained this report: > > usr/bin/install -c -m 755 lib/libopal_linux_x86_r.so.3.3-beta1 /usr/local//lib > /usr/bin/install -c -m 444 opal.pc /usr/local//lib/pkgconfig > ln -snf libopal_linux_x86_r.so.3.3-beta1 \ > /usr/local//lib/libopal_linux_x86_r.so.3.3 > > > Anyone knows how is possible to fix this error? configure your ld.so.conf file so that it looks for libs in /usr/local/lib too, or run LD_LIBRARY_PATH=/usr/local/lib ekiga -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From emanuele.b at automaonline.com Wed Sep 3 16:46:25 2008 From: emanuele.b at automaonline.com (emanuele bottegoni) Date: Wed, 03 Sep 2008 18:46:25 +0200 Subject: [Ekiga-list] Ekiga3 strange behaviour Message-ID: Hello, I'm actually testing some features of this new release. I've encountered some problems: 1)When I close the Ekiga Application the SIP account remain active under the Asterisk server 2)When I Open Preferences tabs appears a warning win dow that Displays: The folder contents could not be displayed Could not get info for 'file:///usr/share/sounds/ekiga': File not found 3)I can only open Ekiga3 from shell(/usr/local/bin/ ./ekiga , thanks Damian for the advice of LD_LIBRARY_PATH), while starting it from Ubuntu Gui, under Applications/Internet/Softphone Ekiga it tries to run but after 10 seconds disappear all. Hope this can help developers Best Regards Emanuele From dsandras at seconix.com Wed Sep 3 17:57:20 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 03 Sep 2008 19:57:20 +0200 Subject: [Ekiga-list] Ekiga3 strange behaviour In-Reply-To: References: Message-ID: <1220464640.4401.3.camel@scorpion.multitel.be> Hi, Le mercredi 03 septembre 2008 ? 18:46 +0200, emanuele bottegoni a ?crit : > Hello, > > I'm actually testing some features of this new release. > I've encountered some problems: > > 1)When I close the Ekiga Application the SIP account remain active under > the Asterisk server Yes, I will fix that tonight. The problem is that it takes longer to exit when there are many accounts, so I chose to let the accounts expire by themselves. > 2)When I Open Preferences tabs appears a warning win dow that Displays: > > The folder contents could not be displayed > Could not get info for 'file:///usr/share/sounds/ekiga': File not found Sounds like a local problem. > 3)I can only open Ekiga3 from shell(/usr/local/bin/ ./ekiga , thanks > Damian for the advice of LD_LIBRARY_PATH), while starting it from Ubuntu > Gui, under Applications/Internet/Softphone Ekiga it tries to run but after > 10 seconds disappear all. That is because LD_LIBRARY_PATH is not set. You should modify ld.so.conf in /etc and run ldconfig, it will fix the problem. > Hope this can help developers > Do you like it or do you prefer 2.0 ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From emanuele.b at automaonline.com Wed Sep 3 22:15:55 2008 From: emanuele.b at automaonline.com (emanuele bottegoni) Date: Thu, 04 Sep 2008 00:15:55 +0200 Subject: [Ekiga-list] Ekiga3 strange behaviour In-Reply-To: <1220464640.4401.3.camel@scorpion.multitel.be> References: <1220464640.4401.3.camel@scorpion.multitel.be> Message-ID: About the second one,is it possible that is not correctly typed? I notice one more slash / in the path.If so I've to fix it looking for the way. At the moment I prefer the second release becasuse is more stable,but the last one is richest, having nice feature, such as H264 support that I think Mattias Schneider is the developer. I see a brilliant success if some bug are fixed and if it's possible to change a little bit the GUI. I wish the team all the best Emanuele -----Original Message----- From: Damien Sandras To: Ekiga mailing list Date: Wed, 03 Sep 2008 19:57:20 +0200 Subject: Re: [Ekiga-list] Ekiga3 strange behaviour > Hi, > > Le mercredi 03 septembre 2008 ?? 18:46 +0200, emanuele bottegoni a > ??crit : > > Hello, > > > > I'm actually testing some features of this new release. > > I've encountered some problems: > > > > 1)When I close the Ekiga Application the SIP account remain active > under > > the Asterisk server > > Yes, I will fix that tonight. The problem is that it takes longer to > exit when there are many accounts, so I chose to let the accounts > expire > by themselves. > > > 2)When I Open Preferences tabs appears a warning win dow that > Displays: > > > > The folder contents could not be displayed > > Could not get info for 'file:///usr/share/sounds/ekiga': File not > found > > Sounds like a local problem. > > > 3)I can only open Ekiga3 from shell(/usr/local/bin/ ./ekiga , thanks > > Damian for the advice of LD_LIBRARY_PATH), while starting it from > Ubuntu > > Gui, under Applications/Internet/Softphone Ekiga it tries to run but > after > > 10 seconds disappear all. > > That is because LD_LIBRARY_PATH is not set. You should modify > ld.so.conf > in /etc and run ldconfig, it will fix the problem. > > > Hope this can help developers > > > > Do you like it or do you prefer 2.0 ? > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From dsandras at seconix.com Thu Sep 4 07:39:16 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 04 Sep 2008 09:39:16 +0200 Subject: [Ekiga-list] Ekiga3 strange behaviour In-Reply-To: References: <1220464640.4401.3.camel@scorpion.multitel.be> Message-ID: <1220513956.4551.4.camel@scorpion.multitel.be> Le jeudi 04 septembre 2008 ? 00:15 +0200, emanuele bottegoni a ?crit : > About the second one,is it possible that is not correctly typed? I notice > one more slash / in the path.If so I've to fix it looking for the way. I think the 3 /// are correct. > At the moment I prefer the second release becasuse is more stable,but the > last one is richest, having nice feature, such as H264 support that I > think Mattias Schneider is the developer. > I see a brilliant success if some bug are fixed and if it's possible to > change a little bit the GUI. What would you change ? Feedback is always important and 3.2 will quickly follow 3.00. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From emanuele.b at automaonline.com Thu Sep 4 11:23:29 2008 From: emanuele.b at automaonline.com (emanuele bottegoni) Date: Thu, 04 Sep 2008 13:23:29 +0200 Subject: [Ekiga-list] Preferences In-Reply-To: <1220513956.4551.4.camel@scorpion.multitel.be> References: <1220464640.4401.3.camel@scorpion.multitel.be> <1220513956.4551.4.camel@scorpion.multitel.be> Message-ID: Hi Damian, the actual GUI view is a little poor,about me,but it's not a big problem. I can't suggest to change based on my preferences but I can say that it could be interesting if each user of Ekiga can modify himself the GUI,based on personal preferences through a specific graphic tool or with some tricks that only developers can tell. What do you think about this? Emanuele -----Original Message----- From: Damien Sandras To: Ekiga mailing list Date: Thu, 04 Sep 2008 09:39:16 +0200 Subject: Re: [Ekiga-list] Ekiga3 strange behaviour > Le jeudi 04 septembre 2008 ?? 00:15 +0200, emanuele bottegoni a ??crit > : > > About the second one,is it possible that is not correctly typed? I > notice > > one more slash / in the path.If so I've to fix it looking for the > way. > > I think the 3 /// are correct. > > > At the moment I prefer the second release becasuse is more stable,but > the > > last one is richest, having nice feature, such as H264 support that I > > think Mattias Schneider is the developer. > > I see a brilliant success if some bug are fixed and if it's possible > to > > change a little bit the GUI. > > What would you change ? > Feedback is always important and 3.2 will quickly follow 3.00. > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From emanuele.b at automaonline.com Thu Sep 4 14:24:30 2008 From: emanuele.b at automaonline.com (emanuele bottegoni) Date: Thu, 04 Sep 2008 16:24:30 +0200 Subject: [Ekiga-list] P2P - ARM Message-ID: Hello guys, I'm asking myself if Ekiga 3 can work correctly in P2P mode,both in audio and video session. I've tried some tests and sometimes works sometimes no. Furthermore: my dream is to obtain an Ekiga version for ARM architecture,especially ARM9,so it's possible to use it in several applications,such as PDA or Smartphone. Thanks Emanuele From christian.charles at credativ.de Thu Sep 4 14:30:48 2008 From: christian.charles at credativ.de (Christian Charles) Date: Thu, 04 Sep 2008 16:30:48 +0200 Subject: [Ekiga-list] snapshot 20080814-1 and H.263 Message-ID: <48BFF118.2000407@credativ.de> I'm evaluating ekiga as a H323 capable videophone client. I have installed ekiga snapshot 20080814-1 on 2 debian/lenny systems and was able to do video calls using the H.261 video codec (and PCMU audio). When i select H.263 as the only video codec in both clients, the call is audio only though. Any ideas? Thanks in advance -- Christian Charles Tel.: +49 (0)21 61 / 46 43-192 credativ GmbH, HRB M?nchengladbach 12080 Hohenzollernstr. 133, 41061 M?nchengladbach Gesch?ftsf?hrung: Dr. Michael Meskes, J?rg Folz From sevmek at free.fr Thu Sep 4 14:39:12 2008 From: sevmek at free.fr (yannick) Date: Thu, 04 Sep 2008 16:39:12 +0200 Subject: [Ekiga-list] snapshot 20080814-1 and H.263 In-Reply-To: <48BFF118.2000407@credativ.de> References: <48BFF118.2000407@credativ.de> Message-ID: <1220539152.8005.5.camel@achille> Le jeudi 04 septembre 2008 ? 16:30 +0200, Christian Charles a ?crit : > I'm evaluating ekiga as a H323 capable videophone client. > I have installed ekiga snapshot 20080814-1 on 2 debian/lenny systems and > was able to do video calls using the H.261 video codec (and PCMU audio). > When i select H.263 as the only video codec in both clients, the call is > audio only though. Any ideas? Using H.323, only H.261 is available. > > Thanks in advance > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dsandras at seconix.com Thu Sep 4 15:14:23 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 04 Sep 2008 17:14:23 +0200 Subject: [Ekiga-list] P2P - ARM In-Reply-To: References: Message-ID: <1220541263.4551.95.camel@scorpion.multitel.be> Hi, Le jeudi 04 septembre 2008 ? 16:24 +0200, emanuele bottegoni a ?crit : > Hello guys, > > I'm asking myself if Ekiga 3 can work correctly in P2P mode,both in audio > and video session. > I've tried some tests and sometimes works sometimes no. That is a bit weird, all of them should work. We have tested intensively. > Furthermore: > my dream is to obtain an Ekiga version for ARM architecture,especially > ARM9,so it's possible to use it in several applications,such as PDA or > Smartphone. Perhaps in the future ;-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From mmassonnet at gmail.com Thu Sep 4 17:04:24 2008 From: mmassonnet at gmail.com (Mike Massonnet) Date: Thu, 4 Sep 2008 19:04:24 +0200 Subject: [Ekiga-list] Some troubles :( Message-ID: <20080904190424.649c56cf@krapton> Hello, I am running two Ekiga and connect via SIP on a local Asterisk. In this configuration I wanted Ekiga to display the remote+local video, but the options are kept insensitive in the menu View. In fact once a call is going on, the only choice is the Remote Video. In your opinion, is this a problem related to Ekiga? Another remark, despit the resolution of the video that I select in the Preferences > Video > Devices, I always and only get the remote video in 176x144. May this also be related to Ekiga or maybe Opal? In all cases, are you able to have calls with a resolution higher than 176x144? I was never able, and I am sceptique now about both issues. Thanks for clearing me up, Mike From dsandras at seconix.com Thu Sep 4 17:53:34 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 04 Sep 2008 19:53:34 +0200 Subject: [Ekiga-list] Some troubles :( In-Reply-To: <20080904190424.649c56cf@krapton> References: <20080904190424.649c56cf@krapton> Message-ID: <1220550814.4455.1.camel@scorpion.multitel.be> Le jeudi 04 septembre 2008 ? 19:04 +0200, Mike Massonnet a ?crit : > Hello, > > I am running two Ekiga and connect via SIP on a local Asterisk. In > this configuration I wanted Ekiga to display the remote+local video, > but the options are kept insensitive in the menu View. In fact once a > call is going on, the only choice is the Remote Video. > > In your opinion, is this a problem related to Ekiga? No... Is videosupport enabled in asterisk ? Is video transmission enabled in ekiga ? > Another remark, despit the resolution of the video that I select in the > Preferences > Video > Devices, I always and only get the remote video > in 176x144. > > May this also be related to Ekiga or maybe Opal? > > In all cases, are you able to have calls with a resolution higher than > 176x144? I was never able, and I am sceptique now about both issues. > Ekiga 2 only works with 176x144. Ekiga 3 works with all resolutions, but Asterisk is broken with that respect. So with asterisk, except with a dirty workaround in ekiga, you will only get 176x144. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From martin.kurtz at gmx.net Fri Sep 5 09:12:00 2008 From: martin.kurtz at gmx.net (Martin Kurtz) Date: Fri, 05 Sep 2008 11:12:00 +0200 Subject: [Ekiga-list] DBus, StateChanged Message-ID: <1220605920.8725.7.camel@martin-desktop> Hallo, i am quite new to DBus, but i figured out how to implement some basic Ekiga features into a Perl programm. I found a list of possible methods and signals used by Ekiga. When I connect to the signal "StateChanged", i see if there is an Incoming Call, an Outgoing Call, or none. That?s great. But how can I (or better the Perl programm) sense, if there is an actual connection? (not only ringing, picking up the phone...) Is there no signal for it? Thanks a lot and have a nice day! From martin.kurtz at gmx.net Fri Sep 5 09:25:36 2008 From: martin.kurtz at gmx.net (Martin Kurtz) Date: Fri, 05 Sep 2008 11:25:36 +0200 Subject: [Ekiga-list] DBus, StateChanged In-Reply-To: <1220605920.8725.7.camel@martin-desktop> References: <1220605920.8725.7.camel@martin-desktop> Message-ID: <1220606736.8725.15.camel@martin-desktop> Sorry, I just realized that I was wrong. It should have this signal (3). But in my case, it switched to state 3 without entering the "calling/ringing" state, it gets connected to the Operator that manages calls to reals phones. (not sip)... Does anybody have an idea, how to get the information, if the person i call to, actually picks up the phone, although there is a connection to the "net-operator"?? Thanks, again... Am Freitag, den 05.09.2008, 11:12 +0200 schrieb Martin Kurtz: > Hallo, > > i am quite new to DBus, but i figured out how to implement some basic > Ekiga features into a Perl programm. > > I found a list of possible methods and signals used by Ekiga. > > When I connect to the signal "StateChanged", i see if there is an > Incoming Call, an Outgoing Call, or none. > That?s great. But how can I (or better the Perl programm) sense, if > there is an actual connection? (not only ringing, picking up the > phone...) > > Is there no signal for it? > > > Thanks a lot and have a nice day! > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From mmassonnet at gmail.com Fri Sep 5 12:46:40 2008 From: mmassonnet at gmail.com (Mike Massonnet) Date: Fri, 5 Sep 2008 14:46:40 +0200 Subject: [Ekiga-list] Some troubles :( In-Reply-To: <1220550814.4455.1.camel@scorpion.multitel.be> References: <20080904190424.649c56cf@krapton> <1220550814.4455.1.camel@scorpion.multitel.be> Message-ID: <20080905144640.29bba7b0@krapton> Le Thu, 04 Sep 2008 19:53:34 +0200, Damien Sandras a ?crit : > Le jeudi 04 septembre 2008 ? 19:04 +0200, Mike Massonnet a ?crit : > > Hello, > > > > I am running two Ekiga and connect via SIP on a local Asterisk. In > > this configuration I wanted Ekiga to display the remote+local video, > > but the options are kept insensitive in the menu View. In fact > > once a call is going on, the only choice is the Remote Video. > > > > In your opinion, is this a problem related to Ekiga? > > No... Is videosupport enabled in asterisk ? > Is video transmission enabled in ekiga ? Yep, for both asterisk and ekiga. So I did some tests again, and I am now able to select the picture-in-picture mode :) It works with a build from snapshots.e.n. > > Another remark, despit the resolution of the video that I select in > > the Preferences > Video > Devices, I always and only get the remote > > video in 176x144. > > > > May this also be related to Ekiga or maybe Opal? > > > > In all cases, are you able to have calls with a resolution higher > > than 176x144? I was never able, and I am sceptique now about both > > issues. > > > > Ekiga 2 only works with 176x144. > Ekiga 3 works with all resolutions, but Asterisk is broken with that > respect. So with asterisk, except with a dirty workaround in ekiga, > you will only get 176x144. This is very good to know. Thank you Mike From rgm at htt-consult.com Fri Sep 5 18:49:57 2008 From: rgm at htt-consult.com (Robert Moskowitz) Date: Fri, 5 Sep 2008 14:49:57 -0400 Subject: [Ekiga-list] gFTP IPv6 bug Message-ID: <48C17F55.8030607@htt-consult.com> I am running on Centos 5.2 (Gnome 2.16.0). gFTP gets a segmentation fault when I try to do a put or get from a vsftp server when both systems are running IPv6 (ie ftp is flowing over IPv6). No problem with SSH over IPv6. Directory listings work fine with ftp. I found an OLD bug report: http://bugzilla.gnome.org/show_bug.cgi?id=350813 Is anyone able to get gFTP doing FTP over IPv6? From fabrice at alphonso.dyndns.org Fri Sep 5 19:40:12 2008 From: fabrice at alphonso.dyndns.org (Fabrice ALPHONSO) Date: Fri, 05 Sep 2008 21:40:12 +0200 Subject: [Ekiga-list] gFTP IPv6 bug In-Reply-To: <48C17F55.8030607@htt-consult.com> References: <48C17F55.8030607@htt-consult.com> Message-ID: <1220643612.8651.2.camel@balder.walhalla> Le vendredi 05 septembre 2008 ? 14:49 -0400, Robert Moskowitz a ?crit : > I am running on Centos 5.2 (Gnome 2.16.0). > > gFTP gets a segmentation fault when I try to do a put or get from a > vsftp server when both systems are running IPv6 (ie ftp is flowing over > IPv6). No problem with SSH over IPv6. Directory listings work fine > with ftp. > > I found an OLD bug report: > > http://bugzilla.gnome.org/show_bug.cgi?id=350813 > > Is anyone able to get gFTP doing FTP over IPv6? I don't see what this question has to do with ekiga ? Perhaps asking this on the gftp mailing list would be more accurate.... At least it would certainly bring to you more answer about your problem... with gftp. ;) > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- ALPHONSO Fabrice http://alphonso.dyndns.org/blog/ http://alphonso.dyndns.org/gallery2/ sip:fabrice at ekiga.net From rgm at htt-consult.com Fri Sep 5 20:15:00 2008 From: rgm at htt-consult.com (Robert Moskowitz) Date: Fri, 5 Sep 2008 16:15:00 -0400 Subject: [Ekiga-list] OOPS wrong list - Re: gFTP IPv6 bug In-Reply-To: <1220643612.8651.2.camel@balder.walhalla> References: <48C17F55.8030607@htt-consult.com> Message-ID: <48C19344.5070007@htt-consult.com> OOPS!!!! Wrong list Fabrice ALPHONSO wrote: > Le vendredi 05 septembre 2008 ? 14:49 -0400, Robert Moskowitz a ?crit : > >> I am running on Centos 5.2 (Gnome 2.16.0). >> >> gFTP gets a segmentation fault when I try to do a put or get from a >> vsftp server when both systems are running IPv6 (ie ftp is flowing over >> IPv6). No problem with SSH over IPv6. Directory listings work fine >> with ftp. >> >> I found an OLD bug report: >> >> http://bugzilla.gnome.org/show_bug.cgi?id=350813 >> >> Is anyone able to get gFTP doing FTP over IPv6? >> > > I don't see what this question has to do with ekiga ? > Perhaps asking this on the gftp mailing list would be more accurate.... > At least it would certainly bring to you more answer about your > problem... with gftp. ;) > > >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> From johnzbesko at alum.mit.edu Sat Sep 6 05:47:08 2008 From: johnzbesko at alum.mit.edu (John Zbesko) Date: Sat, 06 Sep 2008 00:47:08 -0500 Subject: [Ekiga-list] ekiga-snapshot not working with firewire av/c or dv Message-ID: <1220680028.24081.8.camel@Zamd64> I am unable to get ekiga to work with my JVC firewire camcorder. Once upon a time (1 or 2 years ago?), it worked perfectly fine. I don't remember what linux distribution or ekiga version I used back then. Today, I'm using Kubuntu 8.04 x86 with the latest ekiga snapshot. I captured debug info from the command "ekiga -d 4". First, ekiga has some problem with networking, then I ask it to detect video devices, select the av/c device (nothing shows), then I select the dc device and I get an error message. Attached is the debug file. Thank you for any response. My goal is to video-conference with my son at college with a MacPro. (He uses iChat.) ---- I tried attaching a debug file, but the list-serv wouldn't accept it. Below is the relevant portion (I think!) Is this a problem with ekiga or with the dependent library that ekiga uses to communicate with the camcorder? Can someone on this list fix the problem or do I "bug" some other list? Thank you for any response. 2008/09/04 20:47:17.925 0:14.736 ekiga AudioInputCore Detected Device: NULL (NULL/NULL) 2008/09/04 20:47:17.925 0:14.736 ekiga AudioInputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) 2008/09/04 20:47:17.925 0:14.736 ekiga AudioInputCore Detected Device: Default (PTLIB/ALSA) 2008/09/04 20:47:17.925 0:14.736 ekiga AudioInputCore Detected Device: NVidia CK804 (PTLIB/ALSA) 2008/09/04 20:47:17.933 0:14.744 ekiga Detecting V4L2 devices 2008/09/04 20:47:17.933 0:14.744 ekiga Unable to detect v4l2 directory 2008/09/04 20:47:18.081 0:14.892 ekiga VidInputCore Detected Device: Moving Logo (Moving Logo/Moving Logo) 2008/09/04 20:47:18.081 0:14.892 ekiga VidInputCore Detected Device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) 2008/09/04 20:47:18.081 0:14.892 ekiga VidInputCore Detected Device: /dev/raw1394 (PTLIB/1394DC) 2008/09/04 20:47:18.081 0:14.892 VideoPrevi...0xb4563b90 AdaptiveDelay Skipped 4 frames 2008/09/04 20:47:26.227 0:23.038 ekiga AudioOutputCore Detected Device: SILENT (Ekiga/Ekiga) 2008/09/04 20:47:26.227 0:23.038 ekiga AudioOutputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) 2008/09/04 20:47:26.227 0:23.038 ekiga AudioOutputCore Detected Device: Default (PTLIB/ALSA) 2008/09/04 20:47:26.227 0:23.038 ekiga AudioOutputCore Detected Device: NVidia CK804 (PTLIB/ALSA) 2008/09/04 20:47:26.968 0:23.779 ekiga AudioInputCore Detected Device: NULL (NULL/NULL) 2008/09/04 20:47:26.968 0:23.779 ekiga AudioInputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) 2008/09/04 20:47:26.968 0:23.779 ekiga AudioInputCore Detected Device: Default (PTLIB/ALSA) 2008/09/04 20:47:26.968 0:23.779 ekiga AudioInputCore Detected Device: NVidia CK804 (PTLIB/ALSA) 2008/09/04 20:47:26.973 0:23.784 ekiga Detecting V4L2 devices 2008/09/04 20:47:26.974 0:23.785 ekiga Unable to detect v4l2 directory 2008/09/04 20:47:27.134 0:23.945 ekiga VidInputCore Detected Device: Moving Logo (Moving Logo/Moving Logo) 2008/09/04 20:47:27.134 0:23.945 ekiga VidInputCore Detected Device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) 2008/09/04 20:47:27.134 0:23.945 ekiga VidInputCore Detected Device: /dev/raw1394 (PTLIB/1394DC) 2008/09/04 20:47:27.134 0:23.945 VideoPrevi...0xb4563b90 AdaptiveDelay Skipped 4 frames 2008/09/04 20:47:31.751 0:28.562 ekiga VidInputCoreConfBridge Updating device 2008/09/04 20:47:31.761 0:28.572 ekiga VidInputCore Setting device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) 2008/09/04 20:47:31.761 0:28.572 ekiga PreviewManager Stopping Preview 2008/09/04 20:47:31.766 0:28.577 ekiga VidInputCore Closing current device 2008/09/04 20:47:31.766 0:28.577 ekiga GMVideoInputManager_mlogo Closing Moving Logo 2008/09/04 20:47:31.766 0:28.577 ekiga GMVideoInputManager_ptlib Setting Device JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) 2008/09/04 20:47:31.766 0:28.577 ekiga VidInputCore Opening device with 640x480/30 2008/09/04 20:47:31.766 0:28.577 ekiga GMVideoInputManager_ptlib Opening Device JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) 2008/09/04 20:47:31.766 0:28.577 ekiga GMVideoInputManager_ptlib Opening Device with 640x480/30 2008/09/04 20:47:31.779 0:28.590 ekiga trying to open JVC GR-DVM55U GR-DVM55U 2008/09/04 20:47:31.779 0:28.590 ekiga Successfully opened avc1394 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev SetColourFormatConverter, want YUV420P trying YUV420 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev SetColourFormatConverter, want YUV420P trying YUV420P 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev SetColourFormatConverter, want YUV420P trying I420 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev SetColourFormatConverter, want YUV420P trying RGB32 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev SetColourFormatConverter, want YUV420P trying BGR32 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev SetColourFormatConverter, want YUV420P trying RGB24 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev SetColourFormatConverter set camera to RGB24 2008/09/04 20:47:31.780 0:28.591 ekiga PVidDev SetColourFormatConverter succeeded for YUV420P and device using RGB24 2008/09/04 20:47:31.780 0:28.591 ekiga PVidDev Colour converter used from 352x288 [RGB24] to 640x480 [YUV420P] 2008/09/04 20:47:31.780 0:28.591 ekiga PreviewManager Starting Preview 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 Cannot receive data on channel 63 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 GMVideoInputManager_ptlib Expected a frame of 460800 bytes but got 0 bytes 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 VidInputCore Closing current device 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 GMVideoInputManager_ptlib Closing device JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 Close() 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 VidInputCore Falling back to Moving Logo (Moving Logo/Moving Logo) 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 GMVideoInputManager_mlogo Setting Device Moving Logo 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 VidInputCore Opening device with 640x480/30 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of 640x480 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo Initializing XV window with 640x480 at 2,2 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 Error Base: 162 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, first port:355 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 numerator=1 denominator=1 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo Attribute List for Port 355: 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: XV_SET_DEFAULTS 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: set 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 max_color: 0 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: XV_ITURBT_709 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: get set 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 max_color: 1 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: XV_SYNC_TO_VBLANK 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: get set 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 max_color: 1 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo Image format list for Port 355: 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 0x32595559 (YUY2) packed, order: YUYV 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 0x32315659 (YV12) planar, order: YVU 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 0x59565955 (UYVY) packed, order: UYVY 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 0x30323449 (I420) planar, order: YUV 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo Grabbed Port: 355 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo Using XVideo port: 355 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo Found visual with colordepth of 24bits per pixel 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 X11 Created Window with ID 54525957 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo Colorkey method: NONE 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo Vertical sync successfully activated 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo XQueryShmExtension success 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo Created XvImage (640x480, data size: 460800, num_planes: 3 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo Plane 0: pitch=640, offset=0 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo Plane 1: pitch=320, offset=307200 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo Plane 2: pitch=320, offset=384000 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo Using SHM extension 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 X11 Unknown wm type... 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 X11 Unknown X Event 19 received 2008/09/04 20:47:41.879 0:38.690 ekiga VidInputCoreConfBridge Updating device 2008/09/04 20:47:41.883 0:38.694 ekiga VidInputCore Setting device: /dev/raw1394 (PTLIB/1394DC) 2008/09/04 20:47:41.883 0:38.694 ekiga PreviewManager Stopping Preview 2008/09/04 20:47:41.900 0:38.711 ekiga VidInputCore Closing current device 2008/09/04 20:47:41.900 0:38.711 ekiga GMVideoInputManager_mlogo Closing Moving Logo 2008/09/04 20:47:41.900 0:38.711 ekiga GMVideoInputManager_ptlib Setting Device /dev/raw1394 (PTLIB/1394DC) 2008/09/04 20:47:41.900 0:38.711 ekiga VidInputCore Opening device with 640x480/30 2008/09/04 20:47:41.900 0:38.711 ekiga GMVideoInputManager_ptlib Opening Device /dev/raw1394 (PTLIB/1394DC) 2008/09/04 20:47:41.900 0:38.711 ekiga GMVideoInputManager_ptlib Opening Device with 640x480/30 2008/09/04 20:47:41.904 0:38.715 ekiga no cameras found :( 2008/09/04 20:47:41.904 0:38.715 ekiga GMVideoInputManager_ptlib Encountered error 1 while opening device 2008/09/04 20:47:41.904 0:38.715 ekiga VidInputCore Falling back to Moving Logo (Moving Logo/Moving Logo) 2008/09/04 20:47:41.904 0:38.715 ekiga GMVideoInputManager_mlogo Setting Device Moving Logo 2008/09/04 20:47:41.904 0:38.715 ekiga GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 2008/09/04 20:47:41.904 0:38.715 ekiga PreviewManager Starting Preview 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of 640x480 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo Initializing XV window with 640x480 at 2,2 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 Error Base: 162 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, first port:355 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 numerator=1 denominator=1 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo Attribute List for Port 355: 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 name: XV_SET_DEFAULTS 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 flags: set 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 max_color: 0 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 name: XV_ITURBT_709 2008/09/04 20:47:41.908 0:38.720 GMVideoOut...0xb506cb90 flags: get set 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 max_color: 1 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 name: XV_SYNC_TO_VBLANK 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 flags: get set 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 max_color: 1 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo Image format list for Port 355: 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 0x32595559 (YUY2) packed, order: YUYV 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 0x32315659 (YV12) planar, order: YVU 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 0x59565955 (UYVY) packed, order: UYVY 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 0x30323449 (I420) planar, order: YUV 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo Grabbed Port: 355 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo Using XVideo port: 355 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo Found visual with colordepth of 24bits per pixel 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 X11 Created Window with ID 54525960 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo Colorkey method: NONE 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo Vertical sync successfully activated 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo XQueryShmExtension success 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo Created XvImage (640x480, data size: 460800, num_planes: 3 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo Plane 0: pitch=640, offset=0 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo Plane 1: pitch=320, offset=307200 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo Plane 2: pitch=320, offset=384000 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo Using SHM extension 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 X11 Unknown wm type... 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 X11 Unknown X Event 19 received 2008/09/04 20:47:50.711 0:47.522 ekiga VidInputCoreConfBridge Updating device 2008/09/04 20:47:50.715 0:47.526 ekiga VidInputCore Setting device: Moving Logo (Moving Logo/Moving Logo) 2008/09/04 20:47:50.716 0:47.527 ekiga PreviewManager Stopping Preview 2008/09/04 20:47:50.734 0:47.545 ekiga VidInputCore Closing current device 2008/09/04 20:47:50.734 0:47.545 ekiga GMVideoInputManager_mlogo Closing Moving Logo 2008/09/04 20:47:50.734 0:47.545 ekiga GMVideoInputManager_mlogo Setting Device Moving Logo 2008/09/04 20:47:50.734 0:47.545 ekiga VidInputCore Opening device with 640x480/30 2008/09/04 20:47:50.734 0:47.545 ekiga GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 2008/09/04 20:47:50.735 0:47.546 ekiga PreviewManager Starting Preview 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of 640x480 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo Initializing XV window with 640x480 at 2,2 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 Error Base: 162 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, first port:355 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 numerator=1 denominator=1 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo Attribute List for Port 355: 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 name: XV_SET_DEFAULTS 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 flags: set 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 max_color: 0 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 name: XV_ITURBT_709 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 flags: get set 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 max_color: 1 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 name: XV_SYNC_TO_VBLANK 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 flags: get set 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 min_color: 0 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 max_color: 1 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo Image format list for Port 355: 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 0x32595559 (YUY2) packed, order: YUYV 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 0x32315659 (YV12) planar, order: YVU 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 0x59565955 (UYVY) packed, order: UYVY 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 0x30323449 (I420) planar, order: YUV 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo Grabbed Port: 355 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo Using XVideo port: 355 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo Found visual with colordepth of 24bits per pixel 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 X11 Created Window with ID 54525963 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo Colorkey method: NONE 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo Vertical sync successfully activated 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo XQueryShmExtension success 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo Created XvImage (640x480, data size: 460800, num_planes: 3 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo Plane 0: pitch=640, offset=0 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo Plane 1: pitch=320, offset=307200 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo Plane 2: pitch=320, offset=384000 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo Using SHM extension 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 X11 Unknown wm type... 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 X11 Unknown X Event 19 received 2008/09/04 20:47:55.796 0:52.607 ekiga PWLib Destroyed thread 0x831e9fc PreviewManager(id = 0) 2008/09/04 20:47:55.797 0:52.608 ekiga PWLib Destroyed thread 0x831e728 AudioEventScheduler:0xb50adb90(id = 0) 2008/09/04 20:47:55.817 0:52.628 ekiga PreviewManager Stopping Preview 2008/09/04 20:47:55.825 0:52.636 ekiga PWLib Destroyed thread 0x8321aec VideoPreviewManager:0xb50adb90:0xb4563b90(id = 0) 2008/09/04 20:47:55.826 0:52.637 ekiga PWLib Destroyed thread 0x831efb8 GMVideoOutputManager:0xb506cb90(id = 0) 2008/09/04 20:47:55.826 0:52.637 Network In...0xb4fa9b90 IfaceMon Finished interface monitor thread. 2008/09/04 20:47:55.836 0:52.647 ekiga PWLib Destroyed thread 0x8387d78 Network Interface Monitor:0xb4fa9b90(id = 0) 2008/09/04 20:47:55.837 0:52.648 ekiga PWLib Destroyed thread 0x8362598 Housekeeper:0xb4feab90(id = 0) From sevmek at free.fr Sat Sep 6 07:47:48 2008 From: sevmek at free.fr (yannick) Date: Sat, 06 Sep 2008 09:47:48 +0200 Subject: [Ekiga-list] ekiga-snapshot not working with firewire av/c or dv In-Reply-To: <1220680028.24081.8.camel@Zamd64> References: <1220680028.24081.8.camel@Zamd64> Message-ID: <1220687268.8005.32.camel@achille> Le samedi 06 septembre 2008 ? 00:47 -0500, John Zbesko a ?crit : > I am unable to get ekiga to work with my JVC firewire camcorder. Once > upon a time (1 or 2 years ago?), it worked perfectly fine. I don't > remember what linux distribution or ekiga version I used back then. > Today, I'm using Kubuntu 8.04 x86 with the latest ekiga snapshot. > Hello, If using Ubuntu, did you installed this package "ekiga-snapshot-plugins-all-devices" ? Best regards, Yannick > I captured debug info from the command "ekiga -d 4". First, ekiga has > some problem with networking, then I ask it to detect video devices, > select the av/c device (nothing shows), then I select the dc device and > I get an error message. > > Attached is the debug file. Thank you for any response. My goal is to > video-conference with my son at college with a MacPro. (He uses iChat.) > > ---- > > I tried attaching a debug file, but the list-serv wouldn't accept it. > Below is the relevant portion (I think!) Is this a problem with ekiga or > with the dependent library that ekiga uses to communicate with the > camcorder? Can someone on this list fix the problem or do I "bug" some > other list? > > Thank you for any response. > > 2008/09/04 20:47:17.925 0:14.736 ekiga > AudioInputCore Detected Device: NULL (NULL/NULL) > 2008/09/04 20:47:17.925 0:14.736 ekiga > AudioInputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) > 2008/09/04 20:47:17.925 0:14.736 ekiga > AudioInputCore Detected Device: Default (PTLIB/ALSA) > 2008/09/04 20:47:17.925 0:14.736 ekiga > AudioInputCore Detected Device: NVidia CK804 (PTLIB/ALSA) > 2008/09/04 20:47:17.933 0:14.744 ekiga > Detecting V4L2 devices > 2008/09/04 20:47:17.933 0:14.744 ekiga Unable > to detect v4l2 directory > 2008/09/04 20:47:18.081 0:14.892 ekiga > VidInputCore Detected Device: Moving Logo (Moving Logo/Moving Logo) > 2008/09/04 20:47:18.081 0:14.892 ekiga > VidInputCore Detected Device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) > 2008/09/04 20:47:18.081 0:14.892 ekiga > VidInputCore Detected Device: /dev/raw1394 (PTLIB/1394DC) > 2008/09/04 20:47:18.081 0:14.892 VideoPrevi...0xb4563b90 > AdaptiveDelay Skipped 4 frames > 2008/09/04 20:47:26.227 0:23.038 ekiga > AudioOutputCore Detected Device: SILENT (Ekiga/Ekiga) > 2008/09/04 20:47:26.227 0:23.038 ekiga > AudioOutputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) > 2008/09/04 20:47:26.227 0:23.038 ekiga > AudioOutputCore Detected Device: Default (PTLIB/ALSA) > 2008/09/04 20:47:26.227 0:23.038 ekiga > AudioOutputCore Detected Device: NVidia CK804 (PTLIB/ALSA) > 2008/09/04 20:47:26.968 0:23.779 ekiga > AudioInputCore Detected Device: NULL (NULL/NULL) > 2008/09/04 20:47:26.968 0:23.779 ekiga > AudioInputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) > 2008/09/04 20:47:26.968 0:23.779 ekiga > AudioInputCore Detected Device: Default (PTLIB/ALSA) > 2008/09/04 20:47:26.968 0:23.779 ekiga > AudioInputCore Detected Device: NVidia CK804 (PTLIB/ALSA) > 2008/09/04 20:47:26.973 0:23.784 ekiga > Detecting V4L2 devices > 2008/09/04 20:47:26.974 0:23.785 ekiga Unable > to detect v4l2 directory > 2008/09/04 20:47:27.134 0:23.945 ekiga > VidInputCore Detected Device: Moving Logo (Moving Logo/Moving Logo) > 2008/09/04 20:47:27.134 0:23.945 ekiga > VidInputCore Detected Device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) > 2008/09/04 20:47:27.134 0:23.945 ekiga > VidInputCore Detected Device: /dev/raw1394 (PTLIB/1394DC) > 2008/09/04 20:47:27.134 0:23.945 VideoPrevi...0xb4563b90 > AdaptiveDelay Skipped 4 frames > 2008/09/04 20:47:31.751 0:28.562 ekiga > VidInputCoreConfBridge Updating device > 2008/09/04 20:47:31.761 0:28.572 ekiga > VidInputCore Setting device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) > 2008/09/04 20:47:31.761 0:28.572 ekiga > PreviewManager Stopping Preview > 2008/09/04 20:47:31.766 0:28.577 ekiga > VidInputCore Closing current device > 2008/09/04 20:47:31.766 0:28.577 ekiga > GMVideoInputManager_mlogo Closing Moving Logo > 2008/09/04 20:47:31.766 0:28.577 ekiga > GMVideoInputManager_ptlib Setting Device JVC GR-DVM55U GR-DVM55U > (PTLIB/1394AVC) > 2008/09/04 20:47:31.766 0:28.577 ekiga > VidInputCore Opening device with 640x480/30 > 2008/09/04 20:47:31.766 0:28.577 ekiga > GMVideoInputManager_ptlib Opening Device JVC GR-DVM55U GR-DVM55U > (PTLIB/1394AVC) > 2008/09/04 20:47:31.766 0:28.577 ekiga > GMVideoInputManager_ptlib Opening Device with 640x480/30 > 2008/09/04 20:47:31.779 0:28.590 ekiga trying > to open JVC GR-DVM55U GR-DVM55U > 2008/09/04 20:47:31.779 0:28.590 ekiga > Successfully opened avc1394 > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > SetColourFormatConverter, want YUV420P trying YUV420 > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > SetColourFormatConverter, want YUV420P trying YUV420P > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > SetColourFormatConverter, want YUV420P trying I420 > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > SetColourFormatConverter, want YUV420P trying RGB32 > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > SetColourFormatConverter, want YUV420P trying BGR32 > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > SetColourFormatConverter, want YUV420P trying RGB24 > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > SetColourFormatConverter set camera to RGB24 > 2008/09/04 20:47:31.780 0:28.591 ekiga PVidDev > SetColourFormatConverter succeeded for YUV420P and device using RGB24 > 2008/09/04 20:47:31.780 0:28.591 ekiga PVidDev > Colour converter used from 352x288 [RGB24] to 640x480 [YUV420P] > 2008/09/04 20:47:31.780 0:28.591 ekiga > PreviewManager Starting Preview > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 Cannot > receive data on channel 63 > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > GMVideoInputManager_ptlib Expected a frame of 460800 bytes but got > 0 bytes > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > VidInputCore Closing current device > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > GMVideoInputManager_ptlib Closing device JVC GR-DVM55U GR-DVM55U > (PTLIB/1394AVC) > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 Close() > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > VidInputCore Falling back to Moving Logo (Moving Logo/Moving Logo) > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > GMVideoInputManager_mlogo Setting Device Moving Logo > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > VidInputCore Opening device with 640x480/30 > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 > GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of > 640x480 > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo > Initializing XV window with 640x480 at 2,2 > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo > XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 > Error Base: 162 > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo > #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, > first port:355 > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo > Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 > numerator=1 denominator=1 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > Attribute List for Port 355: > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: > XV_SET_DEFAULTS > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: > set > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > max_color: 0 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: > XV_ITURBT_709 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: > get set > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > max_color: 1 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: > XV_SYNC_TO_VBLANK > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: > get set > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > max_color: 1 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > Image format list for Port 355: > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > 0x32595559 (YUY2) packed, order: YUYV > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > 0x32315659 (YV12) planar, order: YVU > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > 0x59565955 (UYVY) packed, order: UYVY > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > 0x30323449 (I420) planar, order: YUV > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > Grabbed Port: 355 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > Using XVideo port: 355 > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > Found visual with colordepth of 24bits per pixel > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 X11 > Created Window with ID 54525957 > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > Colorkey method: NONE > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > Vertical sync successfully activated > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > XQueryShmExtension success > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > Created XvImage (640x480, data size: 460800, num_planes: 3 > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > Plane 0: pitch=640, offset=0 > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > Plane 1: pitch=320, offset=307200 > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > Plane 2: pitch=320, offset=384000 > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > Using SHM extension > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 X11 > Unknown wm type... > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 > GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 X11 > Unknown X Event 19 received > 2008/09/04 20:47:41.879 0:38.690 ekiga > VidInputCoreConfBridge Updating device > 2008/09/04 20:47:41.883 0:38.694 ekiga > VidInputCore Setting device: /dev/raw1394 (PTLIB/1394DC) > 2008/09/04 20:47:41.883 0:38.694 ekiga > PreviewManager Stopping Preview > 2008/09/04 20:47:41.900 0:38.711 ekiga > VidInputCore Closing current device > 2008/09/04 20:47:41.900 0:38.711 ekiga > GMVideoInputManager_mlogo Closing Moving Logo > 2008/09/04 20:47:41.900 0:38.711 ekiga > GMVideoInputManager_ptlib Setting Device /dev/raw1394 > (PTLIB/1394DC) > 2008/09/04 20:47:41.900 0:38.711 ekiga > VidInputCore Opening device with 640x480/30 > 2008/09/04 20:47:41.900 0:38.711 ekiga > GMVideoInputManager_ptlib Opening Device /dev/raw1394 > (PTLIB/1394DC) > 2008/09/04 20:47:41.900 0:38.711 ekiga > GMVideoInputManager_ptlib Opening Device with 640x480/30 > 2008/09/04 20:47:41.904 0:38.715 ekiga no > cameras found :( > > 2008/09/04 20:47:41.904 0:38.715 ekiga > GMVideoInputManager_ptlib Encountered error 1 while opening > device > 2008/09/04 20:47:41.904 0:38.715 ekiga > VidInputCore Falling back to Moving Logo (Moving Logo/Moving Logo) > 2008/09/04 20:47:41.904 0:38.715 ekiga > GMVideoInputManager_mlogo Setting Device Moving Logo > 2008/09/04 20:47:41.904 0:38.715 ekiga > GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 > 2008/09/04 20:47:41.904 0:38.715 ekiga > PreviewManager Starting Preview > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 > GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of > 640x480 > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > Initializing XV window with 640x480 at 2,2 > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 > Error Base: 162 > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, > first port:355 > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 > numerator=1 denominator=1 > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > Attribute List for Port 355: > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 name: > XV_SET_DEFAULTS > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 flags: > set > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 > max_color: 0 > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 name: > XV_ITURBT_709 > 2008/09/04 20:47:41.908 0:38.720 GMVideoOut...0xb506cb90 flags: > get set > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > max_color: 1 > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 name: > XV_SYNC_TO_VBLANK > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 flags: > get set > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > max_color: 1 > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo > Image format list for Port 355: > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > 0x32595559 (YUY2) packed, order: YUYV > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > 0x32315659 (YV12) planar, order: YVU > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > 0x59565955 (UYVY) packed, order: UYVY > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > 0x30323449 (I420) planar, order: YUV > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo > Grabbed Port: 355 > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo > Using XVideo port: 355 > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo > Found visual with colordepth of 24bits per pixel > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 X11 > Created Window with ID 54525960 > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > Colorkey method: NONE > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > Vertical sync successfully activated > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > XQueryShmExtension success > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > Created XvImage (640x480, data size: 460800, num_planes: 3 > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > Plane 0: pitch=640, offset=0 > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > Plane 1: pitch=320, offset=307200 > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > Plane 2: pitch=320, offset=384000 > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > Using SHM extension > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 X11 > Unknown wm type... > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 > GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 X11 > Unknown X Event 19 received > 2008/09/04 20:47:50.711 0:47.522 ekiga > VidInputCoreConfBridge Updating device > 2008/09/04 20:47:50.715 0:47.526 ekiga > VidInputCore Setting device: Moving Logo (Moving Logo/Moving Logo) > 2008/09/04 20:47:50.716 0:47.527 ekiga > PreviewManager Stopping Preview > 2008/09/04 20:47:50.734 0:47.545 ekiga > VidInputCore Closing current device > 2008/09/04 20:47:50.734 0:47.545 ekiga > GMVideoInputManager_mlogo Closing Moving Logo > 2008/09/04 20:47:50.734 0:47.545 ekiga > GMVideoInputManager_mlogo Setting Device Moving Logo > 2008/09/04 20:47:50.734 0:47.545 ekiga > VidInputCore Opening device with 640x480/30 > 2008/09/04 20:47:50.734 0:47.545 ekiga > GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 > 2008/09/04 20:47:50.735 0:47.546 ekiga > PreviewManager Starting Preview > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 > GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of > 640x480 > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > Initializing XV window with 640x480 at 2,2 > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 > Error Base: 162 > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, > first port:355 > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 > numerator=1 denominator=1 > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > Attribute List for Port 355: > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 name: > XV_SET_DEFAULTS > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 flags: > set > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > max_color: 0 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 name: > XV_ITURBT_709 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 flags: > get set > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > max_color: 1 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 name: > XV_SYNC_TO_VBLANK > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 flags: > get set > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > min_color: 0 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > max_color: 1 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo > Image format list for Port 355: > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > 0x32595559 (YUY2) packed, order: YUYV > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > 0x32315659 (YV12) planar, order: YVU > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > 0x59565955 (UYVY) packed, order: UYVY > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > 0x30323449 (I420) planar, order: YUV > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo > Grabbed Port: 355 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo > Using XVideo port: 355 > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo > Found visual with colordepth of 24bits per pixel > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 X11 > Created Window with ID 54525963 > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > Colorkey method: NONE > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > Vertical sync successfully activated > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > XQueryShmExtension success > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > Created XvImage (640x480, data size: 460800, num_planes: 3 > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > Plane 0: pitch=640, offset=0 > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > Plane 1: pitch=320, offset=307200 > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > Plane 2: pitch=320, offset=384000 > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > Using SHM extension > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 X11 > Unknown wm type... > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 > GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 X11 > Unknown X Event 19 received > 2008/09/04 20:47:55.796 0:52.607 ekiga PWLib > Destroyed thread 0x831e9fc PreviewManager(id = 0) > 2008/09/04 20:47:55.797 0:52.608 ekiga PWLib > Destroyed thread 0x831e728 AudioEventScheduler:0xb50adb90(id = 0) > 2008/09/04 20:47:55.817 0:52.628 ekiga > PreviewManager Stopping Preview > 2008/09/04 20:47:55.825 0:52.636 ekiga PWLib > Destroyed thread 0x8321aec VideoPreviewManager:0xb50adb90:0xb4563b90(id > = 0) > 2008/09/04 20:47:55.826 0:52.637 ekiga PWLib > Destroyed thread 0x831efb8 GMVideoOutputManager:0xb506cb90(id = 0) > 2008/09/04 20:47:55.826 0:52.637 Network In...0xb4fa9b90 IfaceMon > Finished interface monitor thread. > 2008/09/04 20:47:55.836 0:52.647 ekiga PWLib > Destroyed thread 0x8387d78 Network Interface Monitor:0xb4fa9b90(id = 0) > 2008/09/04 20:47:55.837 0:52.648 ekiga PWLib > Destroyed thread 0x8362598 Housekeeper:0xb4feab90(id = 0) > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From johnzbesko at alum.mit.edu Sat Sep 6 17:00:42 2008 From: johnzbesko at alum.mit.edu (John Zbesko) Date: Sat, 06 Sep 2008 12:00:42 -0500 Subject: [Ekiga-list] ekiga-snapshot not working with firewire av/c or dv In-Reply-To: <1220687268.8005.32.camel@achille> References: <1220680028.24081.8.camel@Zamd64> <1220687268.8005.32.camel@achille> Message-ID: <1220720442.3794.1.camel@Zamd64> Yes, and I re-installed the snapshot in case there was a more recent update. Still no luck. On Sat, 2008-09-06 at 09:47 +0200, yannick wrote: > Le samedi 06 septembre 2008 ? 00:47 -0500, John Zbesko a ?crit : > > I am unable to get ekiga to work with my JVC firewire camcorder. Once > > upon a time (1 or 2 years ago?), it worked perfectly fine. I don't > > remember what linux distribution or ekiga version I used back then. > > Today, I'm using Kubuntu 8.04 x86 with the latest ekiga snapshot. > > > > Hello, > > If using Ubuntu, did you installed this package > "ekiga-snapshot-plugins-all-devices" ? > > Best regards, > Yannick > > > I captured debug info from the command "ekiga -d 4". First, ekiga has > > some problem with networking, then I ask it to detect video devices, > > select the av/c device (nothing shows), then I select the dc device and > > I get an error message. > > > > Attached is the debug file. Thank you for any response. My goal is to > > video-conference with my son at college with a MacPro. (He uses iChat.) > > > > ---- > > > > I tried attaching a debug file, but the list-serv wouldn't accept it. > > Below is the relevant portion (I think!) Is this a problem with ekiga or > > with the dependent library that ekiga uses to communicate with the > > camcorder? Can someone on this list fix the problem or do I "bug" some > > other list? > > > > Thank you for any response. > > > > 2008/09/04 20:47:17.925 0:14.736 ekiga > > AudioInputCore Detected Device: NULL (NULL/NULL) > > 2008/09/04 20:47:17.925 0:14.736 ekiga > > AudioInputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) > > 2008/09/04 20:47:17.925 0:14.736 ekiga > > AudioInputCore Detected Device: Default (PTLIB/ALSA) > > 2008/09/04 20:47:17.925 0:14.736 ekiga > > AudioInputCore Detected Device: NVidia CK804 (PTLIB/ALSA) > > 2008/09/04 20:47:17.933 0:14.744 ekiga > > Detecting V4L2 devices > > 2008/09/04 20:47:17.933 0:14.744 ekiga Unable > > to detect v4l2 directory > > 2008/09/04 20:47:18.081 0:14.892 ekiga > > VidInputCore Detected Device: Moving Logo (Moving Logo/Moving Logo) > > 2008/09/04 20:47:18.081 0:14.892 ekiga > > VidInputCore Detected Device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) > > 2008/09/04 20:47:18.081 0:14.892 ekiga > > VidInputCore Detected Device: /dev/raw1394 (PTLIB/1394DC) > > 2008/09/04 20:47:18.081 0:14.892 VideoPrevi...0xb4563b90 > > AdaptiveDelay Skipped 4 frames > > 2008/09/04 20:47:26.227 0:23.038 ekiga > > AudioOutputCore Detected Device: SILENT (Ekiga/Ekiga) > > 2008/09/04 20:47:26.227 0:23.038 ekiga > > AudioOutputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) > > 2008/09/04 20:47:26.227 0:23.038 ekiga > > AudioOutputCore Detected Device: Default (PTLIB/ALSA) > > 2008/09/04 20:47:26.227 0:23.038 ekiga > > AudioOutputCore Detected Device: NVidia CK804 (PTLIB/ALSA) > > 2008/09/04 20:47:26.968 0:23.779 ekiga > > AudioInputCore Detected Device: NULL (NULL/NULL) > > 2008/09/04 20:47:26.968 0:23.779 ekiga > > AudioInputCore Detected Device: /dev/.static/dev/dsp (PTLIB/OSS) > > 2008/09/04 20:47:26.968 0:23.779 ekiga > > AudioInputCore Detected Device: Default (PTLIB/ALSA) > > 2008/09/04 20:47:26.968 0:23.779 ekiga > > AudioInputCore Detected Device: NVidia CK804 (PTLIB/ALSA) > > 2008/09/04 20:47:26.973 0:23.784 ekiga > > Detecting V4L2 devices > > 2008/09/04 20:47:26.974 0:23.785 ekiga Unable > > to detect v4l2 directory > > 2008/09/04 20:47:27.134 0:23.945 ekiga > > VidInputCore Detected Device: Moving Logo (Moving Logo/Moving Logo) > > 2008/09/04 20:47:27.134 0:23.945 ekiga > > VidInputCore Detected Device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) > > 2008/09/04 20:47:27.134 0:23.945 ekiga > > VidInputCore Detected Device: /dev/raw1394 (PTLIB/1394DC) > > 2008/09/04 20:47:27.134 0:23.945 VideoPrevi...0xb4563b90 > > AdaptiveDelay Skipped 4 frames > > 2008/09/04 20:47:31.751 0:28.562 ekiga > > VidInputCoreConfBridge Updating device > > 2008/09/04 20:47:31.761 0:28.572 ekiga > > VidInputCore Setting device: JVC GR-DVM55U GR-DVM55U (PTLIB/1394AVC) > > 2008/09/04 20:47:31.761 0:28.572 ekiga > > PreviewManager Stopping Preview > > 2008/09/04 20:47:31.766 0:28.577 ekiga > > VidInputCore Closing current device > > 2008/09/04 20:47:31.766 0:28.577 ekiga > > GMVideoInputManager_mlogo Closing Moving Logo > > 2008/09/04 20:47:31.766 0:28.577 ekiga > > GMVideoInputManager_ptlib Setting Device JVC GR-DVM55U GR-DVM55U > > (PTLIB/1394AVC) > > 2008/09/04 20:47:31.766 0:28.577 ekiga > > VidInputCore Opening device with 640x480/30 > > 2008/09/04 20:47:31.766 0:28.577 ekiga > > GMVideoInputManager_ptlib Opening Device JVC GR-DVM55U GR-DVM55U > > (PTLIB/1394AVC) > > 2008/09/04 20:47:31.766 0:28.577 ekiga > > GMVideoInputManager_ptlib Opening Device with 640x480/30 > > 2008/09/04 20:47:31.779 0:28.590 ekiga trying > > to open JVC GR-DVM55U GR-DVM55U > > 2008/09/04 20:47:31.779 0:28.590 ekiga > > Successfully opened avc1394 > > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > > SetColourFormatConverter, want YUV420P trying YUV420 > > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > > SetColourFormatConverter, want YUV420P trying YUV420P > > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > > SetColourFormatConverter, want YUV420P trying I420 > > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > > SetColourFormatConverter, want YUV420P trying RGB32 > > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > > SetColourFormatConverter, want YUV420P trying BGR32 > > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > > SetColourFormatConverter, want YUV420P trying RGB24 > > 2008/09/04 20:47:31.779 0:28.590 ekiga PVidDev > > SetColourFormatConverter set camera to RGB24 > > 2008/09/04 20:47:31.780 0:28.591 ekiga PVidDev > > SetColourFormatConverter succeeded for YUV420P and device using RGB24 > > 2008/09/04 20:47:31.780 0:28.591 ekiga PVidDev > > Colour converter used from 352x288 [RGB24] to 640x480 [YUV420P] > > 2008/09/04 20:47:31.780 0:28.591 ekiga > > PreviewManager Starting Preview > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 Cannot > > receive data on channel 63 > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > > GMVideoInputManager_ptlib Expected a frame of 460800 bytes but got > > 0 bytes > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > > VidInputCore Closing current device > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > > GMVideoInputManager_ptlib Closing device JVC GR-DVM55U GR-DVM55U > > (PTLIB/1394AVC) > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 Close() > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > > VidInputCore Falling back to Moving Logo (Moving Logo/Moving Logo) > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > > GMVideoInputManager_mlogo Setting Device Moving Logo > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > > VidInputCore Opening device with 640x480/30 > > 2008/09/04 20:47:31.780 0:28.591 VideoPrevi...0xb4563b90 > > GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 > > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 > > GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of > > 640x480 > > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo > > Initializing XV window with 640x480 at 2,2 > > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo > > XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 > > Error Base: 162 > > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo > > #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, > > first port:355 > > 2008/09/04 20:47:31.784 0:28.595 GMVideoOut...0xb506cb90 XVideo > > Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 > > numerator=1 denominator=1 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > > Attribute List for Port 355: > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: > > XV_SET_DEFAULTS > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: > > set > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > max_color: 0 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: > > XV_ITURBT_709 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: > > get set > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > max_color: 1 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 name: > > XV_SYNC_TO_VBLANK > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 flags: > > get set > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > max_color: 1 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > > Image format list for Port 355: > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > 0x32595559 (YUY2) packed, order: YUYV > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > 0x32315659 (YV12) planar, order: YVU > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > 0x59565955 (UYVY) packed, order: UYVY > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 > > 0x30323449 (I420) planar, order: YUV > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > > Grabbed Port: 355 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > > Using XVideo port: 355 > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 XVideo > > Found visual with colordepth of 24bits per pixel > > 2008/09/04 20:47:31.785 0:28.596 GMVideoOut...0xb506cb90 X11 > > Created Window with ID 54525957 > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > > Colorkey method: NONE > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > > Vertical sync successfully activated > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > > XQueryShmExtension success > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > > Created XvImage (640x480, data size: 460800, num_planes: 3 > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > > Plane 0: pitch=640, offset=0 > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > > Plane 1: pitch=320, offset=307200 > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > > Plane 2: pitch=320, offset=384000 > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 XVideo > > Using SHM extension > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 X11 > > Unknown wm type... > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 > > GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window > > 2008/09/04 20:47:31.786 0:28.597 GMVideoOut...0xb506cb90 X11 > > Unknown X Event 19 received > > 2008/09/04 20:47:41.879 0:38.690 ekiga > > VidInputCoreConfBridge Updating device > > 2008/09/04 20:47:41.883 0:38.694 ekiga > > VidInputCore Setting device: /dev/raw1394 (PTLIB/1394DC) > > 2008/09/04 20:47:41.883 0:38.694 ekiga > > PreviewManager Stopping Preview > > 2008/09/04 20:47:41.900 0:38.711 ekiga > > VidInputCore Closing current device > > 2008/09/04 20:47:41.900 0:38.711 ekiga > > GMVideoInputManager_mlogo Closing Moving Logo > > 2008/09/04 20:47:41.900 0:38.711 ekiga > > GMVideoInputManager_ptlib Setting Device /dev/raw1394 > > (PTLIB/1394DC) > > 2008/09/04 20:47:41.900 0:38.711 ekiga > > VidInputCore Opening device with 640x480/30 > > 2008/09/04 20:47:41.900 0:38.711 ekiga > > GMVideoInputManager_ptlib Opening Device /dev/raw1394 > > (PTLIB/1394DC) > > 2008/09/04 20:47:41.900 0:38.711 ekiga > > GMVideoInputManager_ptlib Opening Device with 640x480/30 > > 2008/09/04 20:47:41.904 0:38.715 ekiga no > > cameras found :( > > > > 2008/09/04 20:47:41.904 0:38.715 ekiga > > GMVideoInputManager_ptlib Encountered error 1 while opening > > device > > 2008/09/04 20:47:41.904 0:38.715 ekiga > > VidInputCore Falling back to Moving Logo (Moving Logo/Moving Logo) > > 2008/09/04 20:47:41.904 0:38.715 ekiga > > GMVideoInputManager_mlogo Setting Device Moving Logo > > 2008/09/04 20:47:41.904 0:38.715 ekiga > > GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 > > 2008/09/04 20:47:41.904 0:38.715 ekiga > > PreviewManager Starting Preview > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 > > GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of > > 640x480 > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > > Initializing XV window with 640x480 at 2,2 > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > > XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 > > Error Base: 162 > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > > #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, > > first port:355 > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > > Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 > > numerator=1 denominator=1 > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 XVideo > > Attribute List for Port 355: > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 name: > > XV_SET_DEFAULTS > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 flags: > > set > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 > > max_color: 0 > > 2008/09/04 20:47:41.908 0:38.719 GMVideoOut...0xb506cb90 name: > > XV_ITURBT_709 > > 2008/09/04 20:47:41.908 0:38.720 GMVideoOut...0xb506cb90 flags: > > get set > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > > max_color: 1 > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 name: > > XV_SYNC_TO_VBLANK > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 flags: > > get set > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > > max_color: 1 > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo > > Image format list for Port 355: > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > > 0x32595559 (YUY2) packed, order: YUYV > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > > 0x32315659 (YV12) planar, order: YVU > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > > 0x59565955 (UYVY) packed, order: UYVY > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 > > 0x30323449 (I420) planar, order: YUV > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo > > Grabbed Port: 355 > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo > > Using XVideo port: 355 > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 XVideo > > Found visual with colordepth of 24bits per pixel > > 2008/09/04 20:47:41.909 0:38.720 GMVideoOut...0xb506cb90 X11 > > Created Window with ID 54525960 > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > > Colorkey method: NONE > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > > Vertical sync successfully activated > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > > XQueryShmExtension success > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > > Created XvImage (640x480, data size: 460800, num_planes: 3 > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > > Plane 0: pitch=640, offset=0 > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > > Plane 1: pitch=320, offset=307200 > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > > Plane 2: pitch=320, offset=384000 > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 XVideo > > Using SHM extension > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 X11 > > Unknown wm type... > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 > > GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window > > 2008/09/04 20:47:41.910 0:38.721 GMVideoOut...0xb506cb90 X11 > > Unknown X Event 19 received > > 2008/09/04 20:47:50.711 0:47.522 ekiga > > VidInputCoreConfBridge Updating device > > 2008/09/04 20:47:50.715 0:47.526 ekiga > > VidInputCore Setting device: Moving Logo (Moving Logo/Moving Logo) > > 2008/09/04 20:47:50.716 0:47.527 ekiga > > PreviewManager Stopping Preview > > 2008/09/04 20:47:50.734 0:47.545 ekiga > > VidInputCore Closing current device > > 2008/09/04 20:47:50.734 0:47.545 ekiga > > GMVideoInputManager_mlogo Closing Moving Logo > > 2008/09/04 20:47:50.734 0:47.545 ekiga > > GMVideoInputManager_mlogo Setting Device Moving Logo > > 2008/09/04 20:47:50.734 0:47.545 ekiga > > VidInputCore Opening device with 640x480/30 > > 2008/09/04 20:47:50.734 0:47.545 ekiga > > GMVideoInputManager_mlogo Opening Moving Logo with 640x480/30 > > 2008/09/04 20:47:50.735 0:47.546 ekiga > > PreviewManager Starting Preview > > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 > > GMVideoOutputManager_X Opening VO_MODE_LOCAL display with image of > > 640x480 > > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > > Initializing XV window with 640x480 at 2,2 > > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > > XvQueryExtension: Version: 2 Release: 2 Request Base: 141 Event Base: 92 > > Error Base: 162 > > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > > #0, Adaptor: NV17 Video Texture, type: input | image | , ports: 32, > > first port:355 > > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > > Encoding List for Port 355: id=0 name=XV_IMAGE size=2046x2046 > > numerator=1 denominator=1 > > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 XVideo > > Attribute List for Port 355: > > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 name: > > XV_SET_DEFAULTS > > 2008/09/04 20:47:50.738 0:47.549 GMVideoOut...0xb506cb90 flags: > > set > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > max_color: 0 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 name: > > XV_ITURBT_709 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 flags: > > get set > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > max_color: 1 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 name: > > XV_SYNC_TO_VBLANK > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 flags: > > get set > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > min_color: 0 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > max_color: 1 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo > > Image format list for Port 355: > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > 0x32595559 (YUY2) packed, order: YUYV > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > 0x32315659 (YV12) planar, order: YVU > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > 0x59565955 (UYVY) packed, order: UYVY > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 > > 0x30323449 (I420) planar, order: YUV > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo > > Grabbed Port: 355 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo > > Using XVideo port: 355 > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 XVideo > > Found visual with colordepth of 24bits per pixel > > 2008/09/04 20:47:50.739 0:47.550 GMVideoOut...0xb506cb90 X11 > > Created Window with ID 54525963 > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > > Colorkey method: NONE > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > > Vertical sync successfully activated > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > > XQueryShmExtension success > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > > Created XvImage (640x480, data size: 460800, num_planes: 3 > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > > Plane 0: pitch=640, offset=0 > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > > Plane 1: pitch=320, offset=307200 > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > > Plane 2: pitch=320, offset=384000 > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 XVideo > > Using SHM extension > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 X11 > > Unknown wm type... > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 > > GMVideoOutputManager_X VO_MODE_LOCAL: Successfully opened XV Window > > 2008/09/04 20:47:50.740 0:47.551 GMVideoOut...0xb506cb90 X11 > > Unknown X Event 19 received > > 2008/09/04 20:47:55.796 0:52.607 ekiga PWLib > > Destroyed thread 0x831e9fc PreviewManager(id = 0) > > 2008/09/04 20:47:55.797 0:52.608 ekiga PWLib > > Destroyed thread 0x831e728 AudioEventScheduler:0xb50adb90(id = 0) > > 2008/09/04 20:47:55.817 0:52.628 ekiga > > PreviewManager Stopping Preview > > 2008/09/04 20:47:55.825 0:52.636 ekiga PWLib > > Destroyed thread 0x8321aec VideoPreviewManager:0xb50adb90:0xb4563b90(id > > = 0) > > 2008/09/04 20:47:55.826 0:52.637 ekiga PWLib > > Destroyed thread 0x831efb8 GMVideoOutputManager:0xb506cb90(id = 0) > > 2008/09/04 20:47:55.826 0:52.637 Network In...0xb4fa9b90 IfaceMon > > Finished interface monitor thread. > > 2008/09/04 20:47:55.836 0:52.647 ekiga PWLib > > Destroyed thread 0x8387d78 Network Interface Monitor:0xb4fa9b90(id = 0) > > 2008/09/04 20:47:55.837 0:52.648 ekiga PWLib > > Destroyed thread 0x8362598 Housekeeper:0xb4feab90(id = 0) > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From palos at post.sk Sun Sep 7 09:25:29 2008 From: palos at post.sk (Palo S.) Date: 07 Sep 2008 11:25:29 +0200 (CEST) Subject: [Ekiga-list] PBoolean snapshot compilation problem Message-ID: <48C39E09.000001.07068@kamasutra> Successfully compiled the latest ptlib and opal snapshots but the following error appears when trying to compile ekiga snapshot: error: \'PBoolean\' has not been declared error: \'PBoolean\' does not name a type (and repeating many times) Does anyone know what\'s going on here? I tried the --disable-ansi-bool option but does not seem to help... __________ http://www.inzeraty.sk/ - Bezplatn? inzercia v najob??benej??ch kateg?ri?ch From dsandras at seconix.com Sun Sep 7 09:50:15 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 07 Sep 2008 11:50:15 +0200 Subject: [Ekiga-list] PBoolean snapshot compilation problem In-Reply-To: <48C39E09.000001.07068@kamasutra> References: <48C39E09.000001.07068@kamasutra> Message-ID: <1220781015.4573.9.camel@scorpion.multitel.be> Le dimanche 07 septembre 2008 ? 11:25 +0200, Palo S. a ?crit : > Successfully compiled the latest ptlib and opal snapshots > but the following error appears when trying to compile > ekiga snapshot: > error: \'PBoolean\' has not been declared > error: \'PBoolean\' does not name a type > (and repeating many times) > Does anyone know what\'s going on here? I tried the > --disable-ansi-bool option but does not seem to help... > You probably have a mix of old and new ptlib/opal headers on your system. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From palos at post.sk Sun Sep 7 12:17:04 2008 From: palos at post.sk (Palo S.) Date: 07 Sep 2008 14:17:04 +0200 (CEST) Subject: [Ekiga-list] PBoolean snapshot compilation problem Message-ID: <48C3C640.000001.17937@kamasutra> > > Successfully compiled the latest ptlib and opal snapshots > > but the following error appears when trying to compile > > ekiga snapshot: > > error: \\\'PBoolean\\\' has not been declared > > error: \\\'PBoolean\\\' does not name a type > > (and repeating many times) > > Does anyone know what\\\'s going on here? I tried the > > --disable-ansi-bool option but does not seem to help... > > > > You probably have a mix of old and new ptlib/opal headers on your > system. Yes indeed - there was a single header file forgotten from previous installation... thanks for advice! I double-checked there were no other forgotten headers and compiled from scratch again and Ekiga compiles now - but does not run (segfault). > -- > _ Damien Sandras > (o- > //\\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list __________ http://www.tahaj.sk - Stiahnite si najnovsie verzie vasich oblubenych programov From dsandras at seconix.com Sun Sep 7 12:42:18 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 07 Sep 2008 14:42:18 +0200 Subject: [Ekiga-list] PBoolean snapshot compilation problem In-Reply-To: <48C3C640.000001.17937@kamasutra> References: <48C3C640.000001.17937@kamasutra> Message-ID: <1220791338.4573.20.camel@scorpion.multitel.be> Le dimanche 07 septembre 2008 ? 14:17 +0200, Palo S. a ?crit : > > > Successfully compiled the latest ptlib and opal snapshots > > > but the following error appears when trying to compile > > > ekiga snapshot: > > > error: \\\'PBoolean\\\' has not been declared > > > error: \\\'PBoolean\\\' does not name a type > > > (and repeating many times) > > > Does anyone know what\\\'s going on here? I tried the > > > --disable-ansi-bool option but does not seem to help... > > > > > > > You probably have a mix of old and new ptlib/opal headers on your > > system. > > Yes indeed - there was a single header file forgotten from > previous installation... thanks for advice! I double-checked > there were no other forgotten headers and compiled from scratch > again and Ekiga compiles now - but does not run (segfault). Just post a backtrace somewhere, but it is certainly the same kind of problem. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dlithgow at gmail.com Sun Sep 7 13:45:50 2008 From: dlithgow at gmail.com (Duncan Lithgow) Date: Sun, 7 Sep 2008 15:45:50 +0200 Subject: [Ekiga-list] thanks for all the fish Message-ID: Sorry guys, I'd been hoping I'd have time to work with you a bit on the GUI of Ekiga - but I just can't find the time. Keep up the good work. Bye, Duncan From dsandras at seconix.com Sun Sep 7 14:03:20 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 07 Sep 2008 16:03:20 +0200 Subject: [Ekiga-list] thanks for all the fish In-Reply-To: References: Message-ID: <1220796200.4573.22.camel@scorpion.multitel.be> Le dimanche 07 septembre 2008 ? 15:45 +0200, Duncan Lithgow a ?crit : > Sorry guys, I'd been hoping I'd have time to work with you a bit on > the GUI of Ekiga - but I just can't find the time. Keep up the good > work. Good luck, feel free to join at any time ! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From palos at post.sk Sun Sep 7 14:50:16 2008 From: palos at post.sk (Palo S.) Date: 07 Sep 2008 16:50:16 +0200 (CEST) Subject: [Ekiga-list] PBoolean snapshot compilation problem Message-ID: <48C3EA28.000001.28022@kamasutra> > Just post a backtrace somewhere, but it is certainly the same kind of > problem. I believe I really deleted all the old versions... I put the trace to ftp://quacka.no-ip.org/pub/gdb-ekiga.txt It does not say much to me, unfortunately. __________ http://kultura.sme.sk/ - Informa?n? server o kult?re a ?oubiznise From dsandras at seconix.com Sun Sep 7 14:46:07 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 07 Sep 2008 16:46:07 +0200 Subject: [Ekiga-list] PBoolean snapshot compilation problem In-Reply-To: <48C3EA28.000001.28022@kamasutra> References: <48C3EA28.000001.28022@kamasutra> Message-ID: <1220798767.4573.24.camel@scorpion.multitel.be> Le dimanche 07 septembre 2008 ? 16:50 +0200, Palo S. a ?crit : > > Just post a backtrace somewhere, but it is certainly the same kind of > > problem. > > I believe I really deleted all the old versions... > I put the trace to ftp://quacka.no-ip.org/pub/gdb-ekiga.txt > It does not say much to me, unfortunately. > That OPAL bug has been fixed this morning (european time) => upgrade... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From palos at post.sk Sun Sep 7 16:40:09 2008 From: palos at post.sk (Palo S.) Date: 07 Sep 2008 18:40:09 +0200 (CEST) Subject: [Ekiga-list] PBoolean snapshot compilation problem Message-ID: <48C403E9.000001.03044@kamasutra> > That OPAL bug has been fixed this morning (european time) => upgrade... > -- Ok, thanks. I got a functional build now. I have several bugs/problems to report now: 1) After upgrade it does not compile. This time it stops with: endpoints/manager.cpp: In constructor ?Opal::CallManager::CallManager(Ekiga::ServiceCore&)?: endpoints/manager.cpp:148: error: ?g_async_queue_new_full? was not declared in this scope Apparently g_async_queue_new_full is not there yet. After I disabled line 148 it compiles and runs correctly though. 2) not very nice default settings: the audio devices were set to SILENT, the video bandwidth to 1 Mbps (unrealistically high for a typical user) 3) missing some nice functionalities from Ekiga 2: a. sound configuration test in the configuration manager b. sound settings and status in Ekiga GUI c. option to disable video 4) the echo test results - there is a delay of several seconds. Furthermore, the sound chops frequently. This happens also if I set the video to logo (completely disabled seems not to be in the GUI - point 3c). Hardly usable because of this. I should note that none of these problems is present with Ekiga 2 on the same system. Just my 2 cents. Thanks for all help (and work on Ekiga too, of course)! __________ http://zabava.sme.sk/ - Str?nka ?o usmeje ti tv?r From palos at post.sk Sun Sep 7 16:43:10 2008 From: palos at post.sk (Palo S.) Date: 07 Sep 2008 18:43:10 +0200 (CEST) Subject: [Ekiga-list] PBoolean snapshot compilation problem Message-ID: <48C4049E.000001.03016@kamasutra> sorry - disregard 3b - the sound controls is there once the talk is on (which is a feature I like actually) ----- Origin?lna Spr?va ----- Od: Palo S. Komu: , , Poslan?: 07.09.2008 18:40 Predmet: Re: [Ekiga-list] PBoolean snapshot compilation problem > > > That OPAL bug has been fixed this morning (european time) => upgrade... > > -- > > Ok, thanks. I got a functional build now. I have several > bugs/problems to report now: > > 1) After upgrade it does not compile. This time it stops > with: > > endpoints/manager.cpp: In constructor ?Opal::CallManager::CallManager(Ekiga::ServiceCore&)?: > endpoints/manager.cpp:148: error: ?g_async_queue_new_full? was not declared in this scope > > Apparently g_async_queue_new_full is not there yet. After > I disabled line 148 it compiles and runs correctly though. > > 2) not very nice default settings: the audio devices were > set to SILENT, the video bandwidth to 1 Mbps > (unrealistically high for a typical user) > > 3) missing some nice functionalities from Ekiga 2: > a. sound configuration test in the configuration manager > b. sound settings and status in Ekiga GUI > c. option to disable video > > 4) the echo test results - there is a delay of several > seconds. Furthermore, the sound chops frequently. This > happens also if I set the video to logo (completely > disabled seems not to be in the GUI - point 3c). > Hardly usable because of this. > > I should note that none of these problems is present > with Ekiga 2 on the same system. > > Just my 2 cents. Thanks for all help (and work on Ekiga > too, of course)! > > > > > __________ > http://zabava.sme.sk/ - Str?nka ?o usmeje ti tv?r > > > __________ http://sport.sme.sk - Najkomplexnej?ie inform?cie zo ?portu From dsandras at seconix.com Sun Sep 7 16:50:03 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 07 Sep 2008 18:50:03 +0200 Subject: [Ekiga-list] PBoolean snapshot compilation problem In-Reply-To: <48C403E9.000001.03044@kamasutra> References: <48C403E9.000001.03044@kamasutra> Message-ID: <1220806203.4573.33.camel@scorpion.multitel.be> Le dimanche 07 septembre 2008 ? 18:40 +0200, Palo S. a ?crit : > > That OPAL bug has been fixed this morning (european time) => upgrade... > > -- > > Ok, thanks. I got a functional build now. I have several > bugs/problems to report now: > > 1) After upgrade it does not compile. This time it stops > with: > > endpoints/manager.cpp: In constructor ?Opal::CallManager::CallManager(Ekiga::ServiceCore&)?: > endpoints/manager.cpp:148: error: ?g_async_queue_new_full? was not declared in this scope > > Apparently g_async_queue_new_full is not there yet. After > I disabled line 148 it compiles and runs correctly though. Your glib is not up to date. It should not run correctly when commenting out that line. > 2) not very nice default settings: the audio devices were > set to SILENT, the video bandwidth to 1 Mbps > (unrealistically high for a typical user) The default value is Default (PTLIB/Alsa) for the audio devices and 48 kbits/s for the video bandwidth. If you have a different default value, then your GConf installation is broken. > > 3) missing some nice functionalities from Ekiga 2: > a. sound configuration test in the configuration manager Will not reappear. Testing should be done with 500 at ekiga.net, we will improve the setup on ekiga.net itself. > b. sound settings and status in Ekiga GUI It is still there. (See Call Panel) > c. option to disable video Just disable all video codecs. > 4) the echo test results - there is a delay of several > seconds. Furthermore, the sound chops frequently. This > happens also if I set the video to logo (completely > disabled seems not to be in the GUI - point 3c). > Hardly usable because of this. > Using PCMU / PCMA as codecs ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From palos at post.sk Sun Sep 7 17:46:18 2008 From: palos at post.sk (Palo S.) Date: 07 Sep 2008 19:46:18 +0200 (CEST) Subject: [Ekiga-list] PBoolean snapshot compilation problem Message-ID: <48C4136A.000001.07848@kamasutra> > Your glib is not up to date. It should not run correctly when commenting > out that line. > Indeed, glib is not up to date. But I believe it should not cause much trouble. I understand that this code is only used for STUN detection and since I chose to use previous settings this code was probably never performed. > > 2) not very nice default settings: the audio devices were > > set to SILENT, the video bandwidth to 1 Mbps > > (unrealistically high for a typical user) > > The default value is Default (PTLIB/Alsa) for the audio devices and 48 > kbits/s for the video bandwidth. > If you have a different default value, then your GConf installation is > broken. Can be. I don\'t know how can I check that gconf is broken. (If I need to use gconf occasionally it works ok so it is not broken completely at least) > > > > 3) missing some nice functionalities from Ekiga 2: > > a. sound configuration test in the configuration manager > > Will not reappear. Testing should be done with 500 at ekiga.net, we will > improve the setup on ekiga.net itself. OK. I personally liked the possibility to check the sound configuration independently from network but certainly one can live without it. > > > b. sound settings and status in Ekiga GUI > > It is still there. (See Call Panel) Indeed, my mistake, sorry for that one. > > > c. option to disable video > > Just disable all video codecs. OK. This worked. > > > 4) the echo test results - there is a delay of several > > seconds. Furthermore, the sound chops frequently. This > > happens also if I set the video to logo (completely > > disabled seems not to be in the GUI - point 3c). > > Hardly usable because of this. > > > > Using PCMU / PCMA as codecs ? PCMU. The problem persists when video is disabled. The chopiness seems to be resolved by increasing the jitter to ~500 ms (however, with Ekiga 2 jitter of ~100-150 ms works fine). Palo > -- > _ Damien Sandras > (o- > //\\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > __________ BLOG - V?? denn?k umiestnen? na internete, v ktorom m??ete sprostredk?va? svoje my?lienky, z??itky a nov? inform?cie - http://blog.sme.sk/ From Eugen.Dedu at pu-pm.univ-fcomte.fr Tue Sep 9 08:38:23 2008 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Tue, 09 Sep 2008 10:38:23 +0200 Subject: [Ekiga-list] New debian snapshots Message-ID: <48C635FF.8030708@pu-pm.univ-fcomte.fr> Hi, New debian snapshots are available. The name of packages has been changed. Install the newest ekiga and dependencies with: apt-get install ekiga It will remove your ekiga-snapshot and its dependencies. The H.264 and iLBC plugins are in libopal3.3-beta1-non-free, you should install it manually if you wish them. Good ekiga, -- Eugen Dedu From lists at schramm.es Tue Sep 9 15:38:45 2008 From: lists at schramm.es (Dominique Schramm) Date: Tue, 09 Sep 2008 17:38:45 +0200 Subject: [Ekiga-list] multiple calls Message-ID: <48C69885.5030906@schramm.es> hi list, i am new to ekiga and i like the lightweightness of the programm unlike to wengophone. wengo needs a lot of ram, and there are a lot of functions which i do not need. so i use ekiga, but there is still a question left: if i am phoning with my collegue, i cannot receive any more calls. they will all be rejected with "busy". is there a possibility to switch between calls like: i'm phoning, another call arrives, i put the first call on hold and take the second. i hope you understand what i mean. thanks, -- Viele Gr??e Dominique H. Schramm | Linux Administrator schwarz-weiss.cc | Life between PuTTy and reality ihr-linuxadmin.eu | Commercial Admin Service From dsandras at seconix.com Tue Sep 9 16:46:11 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 09 Sep 2008 18:46:11 +0200 Subject: [Ekiga-list] multiple calls In-Reply-To: <48C69885.5030906@schramm.es> References: <48C69885.5030906@schramm.es> Message-ID: <1220978771.27591.9.camel@scorpion.multitel.be> Le mardi 09 septembre 2008 ? 17:38 +0200, Dominique Schramm a ?crit : > hi list, > > i am new to ekiga and i like the lightweightness of the programm unlike > to wengophone. wengo needs a lot of ram, and there are a lot of > functions which i do not need. > > so i use ekiga, but there is still a question left: > > if i am phoning with my collegue, i cannot receive any more calls. they > will all be rejected with "busy". is there a possibility to switch > between calls like: i'm phoning, another call arrives, i put the first > call on hold and take the second. > > i hope you understand what i mean. > Yes; it is foreseen for Ekiga 3.2. Ekiga 3.00 and Ekiga 2.00 do not implement that. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From afb at paradise.net.nz Thu Sep 11 00:20:44 2008 From: afb at paradise.net.nz (Adam Bogacki) Date: Thu, 11 Sep 2008 12:20:44 +1200 Subject: [Ekiga-list] new debian snapshots Message-ID: <48C8645C.8000307@paradise.net.nz> Hi, [apologies if this duplicates a previous message. My mutt msgs don't seem, to be getting through to this list]. > Message: 1 > Date: Tue, 09 Sep 2008 10:38:23 +0200 > From: Eugen Dedu > Subject: [Ekiga-list] New debian snapshots > To: Ekiga mailing list > Message-ID: <48C635FF.8030708 at pu-pm.univ-fcomte.fr> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Hi, > > New debian snapshots are available. The name of packages has been > changed. Install the newest ekiga and dependencies with: > apt-get install ekiga > It will remove your ekiga-snapshot and its dependencies. > > The H.264 and iLBC plugins are in libopal3.3-beta1-non-free, you should > install it manually if you wish them. > > Good ekiga, > -- > Eugen Dedu Many thanks, Eugen (& developers). Unfortunately, on apt-installing ekiga (2.9.90.svn20080908-1) I keep getting an error message entitled "Configuration Database Corruption" which tells me that "Ekiga got an invalid value for the configuration key /apps/ekiga/general/gconf_test_age It probably means that your configuration schemas have not been correctly installed or that the permissions are not correct. Please check the FAQ (http://www.ekiga.org), the troubleshooting section of the GConf site (http://www.gnome.org/projects/gconf) or the mailing list archives for more information about this problem (http://mail.gnome.org)." I have checked the sources above without result. I have a mixed etch/lenny system, installing ekiga via apt-get -t unstable install ekiga Any suggestions for a fix ? Adam Bogacki, afb at paradise.net.nz P.S. libopal3.3-beta was installed as part of the package, see below. >Setting up libpt2.3-beta1-plugins-alsa (2.3.0+svn20904-1) ... >Setting up libpt2.3-beta1-plugins-v4l2 (2.3.0+svn20904-1) ... >Setting up libpt2.3-beta1 (2.3.0+svn20904-1) ... >Setting up libopal3.3-beta1 (3.3.0+svn20904.dfsg-1) ... >Setting up ekiga (2.9.90.svn20080908-1) ... >Setting up ekiga-dbg (2.9.90.svn20080908-1) ... From lists at schramm.es Thu Sep 11 02:19:00 2008 From: lists at schramm.es (Dominique Schramm) Date: Thu, 11 Sep 2008 04:19:00 +0200 Subject: [Ekiga-list] new debian snapshots In-Reply-To: <48C8645C.8000307@paradise.net.nz> References: <48C8645C.8000307@paradise.net.nz> Message-ID: <48C88014.3050808@schramm.es> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Adam Bogacki schrieb: > > Many thanks, Eugen (& developers). > > Unfortunately, on apt-installing ekiga (2.9.90.svn20080908-1) > I keep getting an error message entitled > > "Configuration Database Corruption" > > which tells me that > > "Ekiga got an invalid value for the configuration key > > /apps/ekiga/general/gconf_test_age > > It probably means that your configuration schemas > have not been correctly installed or that the permissions > are not correct. > Please check the FAQ (http://www.ekiga.org), the troubleshooting > section of the GConf site (http://www.gnome.org/projects/gconf) > or the mailing list archives for more information about this problem > (http://mail.gnome.org)." > > I have checked the sources above without result. > > I have a mixed etch/lenny system, installing ekiga via > > apt-get -t unstable install ekiga > > Any suggestions for a fix ? Hi, kill the gconfd-2 process and restart ekiga. i did it that way and it works great :) - -- Viele Gr??e Dominique H. Schramm | Linux Administrator schwarz-weiss.cc | Life between PuTTy and reality ihr-linuxadmin.eu | Commercial Admin Service -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkjIgBQACgkQTT96GaiMQuOwLwCcChJvdh4mtUIRPZMvXYtPMUex RpUAoO3ROAOp93qTlMxI7QW29AISXbvn =4/CR -----END PGP SIGNATURE----- From dsandras at seconix.com Thu Sep 11 08:11:11 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 11 Sep 2008 10:11:11 +0200 Subject: [Ekiga-list] new debian snapshots In-Reply-To: <48C8645C.8000307@paradise.net.nz> References: <48C8645C.8000307@paradise.net.nz> Message-ID: <1221120671.4663.6.camel@scorpion.multitel.be> Le jeudi 11 septembre 2008 ? 12:20 +1200, Adam Bogacki a ?crit : > Hi, > > [apologies if this duplicates a previous message. My mutt msgs don't > seem, to be > getting through to this list]. > > > Message: 1 > > Date: Tue, 09 Sep 2008 10:38:23 +0200 > > From: Eugen Dedu > > Subject: [Ekiga-list] New debian snapshots > > To: Ekiga mailing list > > Message-ID: <48C635FF.8030708 at pu-pm.univ-fcomte.fr> > > Content-Type: text/plain; charset=UTF-8; format=flowed > > > > Hi, > > > > New debian snapshots are available. The name of packages has been > > changed. Install the newest ekiga and dependencies with: > > apt-get install ekiga > > It will remove your ekiga-snapshot and its dependencies. > > > > The H.264 and iLBC plugins are in libopal3.3-beta1-non-free, you > should > > install it manually if you wish them. > > > > Good ekiga, > > -- > > Eugen Dedu > > Many thanks, Eugen (& developers). > > Unfortunately, on apt-installing ekiga (2.9.90.svn20080908-1) > I keep getting an error message entitled > > "Configuration Database Corruption" > > which tells me that > > "Ekiga got an invalid value for the configuration key > > /apps/ekiga/general/gconf_test_age > > It probably means that your configuration schemas > have not been correctly installed or that the permissions > are not correct. > Please check the FAQ (http://www.ekiga.org), the troubleshooting > section of the GConf site (http://www.gnome.org/projects/gconf) > or the mailing list archives for more information about this problem > (http://mail.gnome.org)." > > I have checked the sources above without result. > > I have a mixed etch/lenny system, installing ekiga via > > apt-get -t unstable install ekiga > > Any suggestions for a fix ? > Does gconftool-2 -u /apps/ekiga/general/gconf_test_age fix the problem ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From shivaprakash.km at gmail.com Thu Sep 11 09:42:38 2008 From: shivaprakash.km at gmail.com (Shivaprakash K M) Date: Thu, 11 Sep 2008 15:12:38 +0530 Subject: [Ekiga-list] New to Ekiga....how to setup Message-ID: Hi All, Recently I downloaded Ekiga & I need help in setting up the same. Is there any document to setup Ekiga? please provide me some pointers. Thanks in advance. -- Thanks Shiva -------------- next part -------------- An HTML attachment was scrubbed... URL: From Denis.Leslie at tiscali.co.uk Thu Sep 11 10:07:35 2008 From: Denis.Leslie at tiscali.co.uk (Denis Leslie) Date: Thu, 11 Sep 2008 11:07:35 +0100 Subject: [Ekiga-list] New to Ekiga....how to setup In-Reply-To: References: Message-ID: <200809111107.35309.Denis.Leslie@tiscali.co.uk> On Thursday 11 September 2008 10:42:38 Shivaprakash K M wrote: > Hi All, > > Recently I downloaded Ekiga & I need help in setting up the same. > Is there any document to setup Ekiga? please provide me some pointers. > Thanks in advance. http://www.ekiga.org/index.php?rub=3 -- Denis Leslie Can we live on our own renewables? - http://www.withouthotair.com/ From andre at bwh.harvard.edu Thu Sep 11 14:59:25 2008 From: andre at bwh.harvard.edu (Andre Robatino) Date: Thu, 11 Sep 2008 10:59:25 -0400 Subject: [Ekiga-list] ekiga.net SIP server is down Message-ID: <48C9324D.7090203@bwh.harvard.edu> Unable to register with the ekiga.net SIP server for at least the last few hours. -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3266 bytes Desc: S/MIME Cryptographic Signature URL: From sevmek at free.fr Thu Sep 11 15:28:10 2008 From: sevmek at free.fr (yannick) Date: Thu, 11 Sep 2008 17:28:10 +0200 Subject: [Ekiga-list] ekiga.net SIP server is down In-Reply-To: <48C9324D.7090203@bwh.harvard.edu> References: <48C9324D.7090203@bwh.harvard.edu> Message-ID: <1221146891.8005.149.camel@achille> Le jeudi 11 septembre 2008 ? 10:59 -0400, Andre Robatino a ?crit : > Unable to register with the ekiga.net SIP server for at least the last > few hours. Hello, I just registered to Ekiga.net But, i can see some erratic behaviour in our statistics, like if some people register at the almost same time and unregister few minutes later since yesterday 15H UTC. Jan, damien? Best regards, Yannick > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From andre at bwh.harvard.edu Thu Sep 11 15:36:31 2008 From: andre at bwh.harvard.edu (Andre Robatino) Date: Thu, 11 Sep 2008 11:36:31 -0400 Subject: [Ekiga-list] ekiga.net SIP server is down In-Reply-To: <1221146891.8005.149.camel@achille> References: <48C9324D.7090203@bwh.harvard.edu> <1221146891.8005.149.camel@achille> Message-ID: <48C93AFF.1080201@bwh.harvard.edu> yannick wrote: > Le jeudi 11 septembre 2008 ? 10:59 -0400, Andre Robatino a ?crit : >> Unable to register with the ekiga.net SIP server for at least the last >> few hours. > > Hello, > > I just registered to Ekiga.net > > But, i can see some erratic behaviour in our statistics, like if some > people register at the almost same time and unregister few minutes later > since yesterday 15H UTC. Jan, damien? I had been unchecking and rechecking the ekiga.net box in Edit/Accounts and kept getting "Registration failed". But just now, I quit and restarted Ekiga and it immediately registered. Any idea why that works? -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3266 bytes Desc: S/MIME Cryptographic Signature URL: From andre at bwh.harvard.edu Thu Sep 11 15:48:59 2008 From: andre at bwh.harvard.edu (Andre Robatino) Date: Thu, 11 Sep 2008 11:48:59 -0400 Subject: [Ekiga-list] ekiga.net SIP server is down In-Reply-To: <48C93AFF.1080201@bwh.harvard.edu> References: <48C9324D.7090203@bwh.harvard.edu> <1221146891.8005.149.camel@achille> <48C93AFF.1080201@bwh.harvard.edu> Message-ID: <48C93DEB.9050309@bwh.harvard.edu> Andre Robatino wrote: > yannick wrote: >> Le jeudi 11 septembre 2008 ? 10:59 -0400, Andre Robatino a ?crit : >>> Unable to register with the ekiga.net SIP server for at least the last >>> few hours. >> Hello, >> >> I just registered to Ekiga.net >> >> But, i can see some erratic behaviour in our statistics, like if some >> people register at the almost same time and unregister few minutes later >> since yesterday 15H UTC. Jan, damien? > > I had been unchecking and rechecking the ekiga.net box in Edit/Accounts > and kept getting "Registration failed". But just now, I quit and > restarted Ekiga and it immediately registered. Any idea why that works? It will sometimes register when starting Ekiga. But if I uncheck and recheck the box in Edit/Accounts, it usually can't register again. And even when registered, any attempted call results in an immediate "Abnormal call termination". -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3266 bytes Desc: S/MIME Cryptographic Signature URL: From jan.schampera at web.de Fri Sep 12 04:50:08 2008 From: jan.schampera at web.de (Jan Schampera) Date: Fri, 12 Sep 2008 06:50:08 +0200 Subject: [Ekiga-list] [Fwd: "First Time Configuration Assistant"] Message-ID: <48C9F500.90606@web.de> Forwarded to the Ekiga User Mailinglist: - http://mail.gnome.org/mailman/listinfo/ekiga-list - mailto:ekiga-list at gnome.org Forwarded Mail is attached. -- This is my life - this is my net! - Jan -------------- next part -------------- An embedded message was scrubbed... From: unknown sender Subject: no subject Date: no date Size: 2825 URL: From afb at paradise.net.nz Fri Sep 12 05:45:51 2008 From: afb at paradise.net.nz (Adam Bogacki) Date: Fri, 12 Sep 2008 17:45:51 +1200 Subject: [Ekiga-list] new debian snapshots Message-ID: <48CA020F.2040205@paradise.net.nz> Thanks. > kill the gconfd-2 process and restart ekiga. .. it did not work. Same error message as before. > Does gconftool-2 -u /apps/ekiga/general/gconf_test_age > fix the problem ? Likewise .. which is strange because the previous (debian 2.0.11-2) ekiga had no such problem. Googling around by the error msg suggests that this has occured in previous versions. I found references that the first line of 'ekiga.schemas' is often split, and that fixing it solves the problem. No so, in this case. http://www.mail-archive.com/ekiga-devel-list at gnome.org/msg01376.html suggests that eugen was geting the same error during compilation. Why was it [apparently] compiled without avahi and dbus ? (I ask in my ignorance). Others have apparently been having this problem for some time. > http://www.mail-archive.com/packman at links2linux.de/msg01013.html I have also tried reinstalling the schemas manually, without success. > $ export GCONF_CONFIG_SOURCE=`/usr/bin/gconftool-2 --get-default-source` > $ /usr/bin/gconftool-2 --makefile-install-rule /etc/gconf/schemas/ekiga.schemas .. and > $ export GCONF_CONFIG_SOURCE=`/usr/bin/gconftool-2 --get-default-source` > $ /usr/bin/gconftool-2 --makefile-uninstall-rule /etc/gconf/schemas/ekiga.schemas .. but trying to reinstall schemas I now get > Tohunga:~# > > bash: syntax error near unexpected token `newline' > Tohunga:~# > /usr/bin/gconftool-2 --makefile-install-rule > /etc/gconf/schemas/ekiga.schemas > bash: --makefile-install-rule: command not found I'm still getting the same error msg on 'ekiga -d 4' But after > Tohunga:~# gconftool-2 --get-default-source > Tohunga:~# chmod -R 4755 /etc/opt/gnome/gconf/gconf.xml.defaults > chmod: cannot access `/etc/opt/gnome/gconf/gconf.xml.defaults': No > such file or directory > Tohunga:~# killall -9 gconfd-2 .. I get the Ekiga Configuration Assistant asking for an account ID and a PIN code. I skipped the Ekiga Call Out Account (I already have one with Diamondcard), being unsure about Audio Devices I chose the 'Ensoniq AudioPCI PTLIB/ALSA' option, the Moving Logo, and I have Ekiga 2.9.90 working. At this point I'm a bit confused .. this is my first experience of it. I admire its clean lines, but cannot immediately find all the functions I have become used to. It might be a good idea to keep an 'old' version around as an option until people migrate. I can't find the 'prescence' option in the address book which shows online Ekiga users. What I do find impressive, is that it seems to detect my video device, a basic fixed-focus Logitech Webcam which became undetectable by ekiga 2.0.11-2 .after trying ekiga-snapshot. The new manual is impressive .. I'll have to read it again. Cheers ! Adam Bogacki, afb at paradise.net.nz From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Sep 12 07:23:22 2008 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 12 Sep 2008 09:23:22 +0200 Subject: [Ekiga-list] [Fwd: "First Time Configuration Assistant"] In-Reply-To: <48C9F500.90606@web.de> References: <48C9F500.90606@web.de> Message-ID: <48CA18EA.3090701@pu-pm.univ-fcomte.fr> Jan Schampera wrote: > Forwarded to the Ekiga User Mailinglist: > - http://mail.gnome.org/mailman/listinfo/ekiga-list > - mailto:ekiga-list at gnome.org > > Forwarded Mail is attached. > > > ------------------------------------------------------------------------ > > >>From kent at uoregon.edu Fri Sep 12 02:20:14 2008 > Return-Path: > X-Spam-Checker-Version: SpamAssassin 3.1.7-deb (2006-10-05) on > gate.home.thebonsai.de > X-Spam-Level: > X-Spam-Status: No, score=-2.5 required=2.5 tests=BAYES_00,FORGED_RCVD_HELO > autolearn=ham version=3.1.7-deb > X-Original-To: bonsai at localhost > Delivered-To: bonsai at localhost > Received: from gate (localhost [127.0.0.1]) > by mail.home.thebonsai.de (Postfix) with ESMTP id BCC0C3FA64 > for ; Fri, 12 Sep 2008 02:20:02 +0200 (CEST) > Received: from pop3.web.de [217.72.192.134] > by gate with POP3 (fetchmail-6.3.6) > for (single-drop); Fri, 12 Sep 2008 02:20:02 +0200 (CEST) > Received: from [86.64.162.35] (helo=ekiga.com) > by mx35.web.de with esmtp (WEB.DE 4.109 #226) > id 1KdwI7-0005nD-00 > for jan.schampera at web.de; Fri, 12 Sep 2008 02:13:39 +0200 > Received: by ekiga.com (Postfix, from userid 65534) > id 80EEA670351; Fri, 12 Sep 2008 02:13:39 +0200 (CEST) > X-Greylist: delayed 587 seconds by postgrey-1.27 at abv-net-ekiga-01; Fri, 12 Sep 2008 02:13:30 CEST > Received: from smtp.uoregon.edu (mserv2.uoregon.edu [128.223.142.41]) > (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) > (No client certificate requested) > by ekiga.com (Postfix) with ESMTP id 4FF99670265 > for ; Fri, 12 Sep 2008 02:13:29 +0200 (CEST) > Received: from [192.168.1.145] (75-170-72-202.eugn.qwest.net [75.170.72.202]) > (authenticated bits=0) > by smtp.uoregon.edu (8.13.8/8.13.8) with ESMTP id m8C03ddO001538 > (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); > Thu, 11 Sep 2008 17:03:40 -0700 > Message-ID: <48C9B1DB.3030606 at uoregon.edu> > Date: Thu, 11 Sep 2008 17:03:39 -0700 > From: Kent > User-Agent: Thunderbird 2.0.0.16 (X11/20080724) > MIME-Version: 1.0 > To: accounts at ekiga.net > Subject: "First Time Configuration Assistant" > References: <338245.2344.qm at web39802.mail.mud.yahoo.com> > In-Reply-To: <338245.2344.qm at web39802.mail.mud.yahoo.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > Content-Transfer-Encoding: 7bit > X-Virus-Scanned: ClamAV 0.94/8220/Thu Sep 11 14:27:09 2008 on mserv2 > X-Virus-Status: Clean > Sender: kent at uoregon.edu > > I am on "Video Devices - page 9/10" > > I have selected "UVC Camera (046d:0991) > "The video input device is the device managed by" > "the video manager that will be used to capture" > "video." > > Note: On a previous step I had selected "v4l" > > When I click "Test Settings" > > I get "Failed to open the device" > "Could not open the chosen" > "channel with the chosen video" > "format." > > I am using Kubuntu/Ubuntu 8.04 Ekiga package "2.0.12-0ubuntu2" > The Ekiga version is "ekiga 2.0.12" > > Any suggestions about how I could get Ekiga video to work on my system > will be appreciated. Note: luvcview works fine. UVC does not work with V4L. You should use V4L2. -- Eugen From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Sep 12 07:26:28 2008 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 12 Sep 2008 09:26:28 +0200 Subject: [Ekiga-list] new debian snapshots In-Reply-To: <48CA020F.2040205@paradise.net.nz> References: <48CA020F.2040205@paradise.net.nz> Message-ID: <48CA19A4.4050902@pu-pm.univ-fcomte.fr> Adam Bogacki wrote: > Thanks. > Why was it [apparently] compiled without avahi and dbus ? (I ask in my > ignorance). I don't know, maybe dbus and avahi had before to be given as parameters in configure to be included, and they were not given by ignorance?! -- Eugen From dsandras at seconix.com Fri Sep 12 07:52:49 2008 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 12 Sep 2008 09:52:49 +0200 Subject: [Ekiga-list] new debian snapshots In-Reply-To: <48CA020F.2040205@paradise.net.nz> References: <48CA020F.2040205@paradise.net.nz> Message-ID: <1221205969.4581.13.camel@scorpion.multitel.be> Le vendredi 12 septembre 2008 ? 17:45 +1200, Adam Bogacki a ?crit : > Thanks. > > kill the gconfd-2 process and restart ekiga. > .. it did not work. Same error message as before. > > > Does gconftool-2 -u /apps/ekiga/general/gconf_test_age > > fix the problem ? > Likewise .. which is strange because the previous (debian 2.0.11-2) > ekiga had no such problem. That is because you once forced the key to a specific value by hand, then forgot about it. Hence the problem. > At this point I'm a bit confused .. this is my first experience of it. I > admire its clean lines, > but cannot immediately find all the functions I have become used to. It > might be a good idea > to keep an 'old' version around as an option until people migrate. I > can't find the 'prescence' > option in the address book which shows online Ekiga users. It does not exist anymore (but could come again at a later stage). But you can add 2.9.90 contacts to your roster, and see people online/away/ .... Thanks for trying it :) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From alberto.mengoni at gmail.com Fri Sep 12 09:03:49 2008 From: alberto.mengoni at gmail.com (albe') Date: Fri, 12 Sep 2008 11:03:49 +0200 Subject: [Ekiga-list] no connection possible Message-ID: <48caeffb0809120203p758f3874v840210ea1dc6c954@mail.gmail.com> Hello, There is no-way I can get the registration completed. Is the "ekiga.net" SIP server down? I have just installed the windows version (2.0.11), and I must go through a proxy server for connections. How do I set the proxy-server infos for connections? Thanks for help, Albert -- alberto mengoni private account on gmail -------------- next part -------------- An HTML attachment was scrubbed... URL: From f.vonbock at gmail.com Fri Sep 12 10:09:28 2008 From: f.vonbock at gmail.com (Fedor vonBock) Date: Fri, 12 Sep 2008 13:09:28 +0300 Subject: [Ekiga-list] Registration failed: Timeout Message-ID: Hi, I'm trying to configure ekiga on ubuntu, yet i can't seen to be doing anything. when i enter the test url sip:500 at ekiga.net i get no response, and when i try to connect to the pc-to-phone account i get registration failed:Timeout What can i do about this? i tried uninstalling and installing again but still the problem remains. -------------- next part -------------- An HTML attachment was scrubbed... URL: From afb at paradise.net.nz Sun Sep 14 10:42:11 2008 From: afb at paradise.net.nz (Adam Bogacki) Date: Sun, 14 Sep 2008 22:42:11 +1200 Subject: [Ekiga-list] new debian snapshots Message-ID: <48CCEA83.5000301@paradise.net.nz> > That is because you once forced the key to a specific value by hand, > then forgot about it. Hence the problem. True. I vaguely remember doing something with gconf when I first set up ekiga 2.0.*, but I cannot remember the details. On closer inspection, the URL component of contact details has not been migrated from ekiga 2.0*, and ekiga 2.9.90 is not recognising my webcam. The latter happened after my first snapshot attempt and I have not yet worked out what happened. I'll try later .. Cheers, Adam Bogacki, afb at paradise.net.nz From edunagin at gmail.com Sun Sep 14 18:53:22 2008 From: edunagin at gmail.com (Edward Dunagin) Date: Sun, 14 Sep 2008 12:53:22 -0600 Subject: [Ekiga-list] Ekiga 2.0.12 Message-ID: <2af451740809141153i504264c3rb8a0dd18263b38b@mail.gmail.com> I am not sure I should report problems with this version. anyway........... In the Idle mode, there is only one video, the Logo. When I call 500 at ekiga.net my vebcam replaces the Logo and when conected and testing video, there is only one video window, whereas in the past there would be two video pictures, one from my webcam and one as feedback from 500 at ekiga.net. Anyway, let me know if I should not report problems with this version. Peace...............................ed Edward Dunagin-Dunigan Bozeman, MT 59718 mobile 406-570-0992 Land line 406-556-7282 EKIGA: sip:edunagin at ekiga.net http://doas.montanalinux.org From dardack at gmail.com Mon Sep 15 15:52:18 2008 From: dardack at gmail.com (MacNean Tyrrell) Date: Mon, 15 Sep 2008 11:52:18 -0400 Subject: [Ekiga-list] DID, ATA and Ekiga Message-ID: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> Ok i'm done with Vonage/Verizon Voicewing. Just $30/month for the amount I use it is crazy. I have successfully "hacked" (i hate that word, I bought it i should be able to do with it what i want) my old Linksys RTP300 from Vonage. I noticed that Ekiga offers a free sip address. Is it possible to use this address with a did provider and my rtp300? (I did search the mailing list, but I didn't find anything, and I'll admit I could have missed it). I noticed that Diamondcard is the recommended (well not forcing but they give back to ekiga) and people that have it, is the 1.7cents a minute for both out going and incoming calls? (obviously that rate is for US) THe wiki and website are a little lite on information that I saw. Also, anyone know if that rate is also for mobile calls? Anyone use their DID service? And can you cancel? Like $2/month isn't bad, but if ipkall ever registers me for a free DID i would cancel the one from Diamondcard. Just trying to get all the info I can before I spend any money on services. Also, if anyone uses a different out/in providor to landlines/mobiles that is cheaper, pls let me know. Many of the voip sip providers to Phone or from phone seem to be scamish at best, advertising free calls (to USA anyways) but you get to fine print and I'm not so sure. -- Sincerely, MacNean C. Tyrrell -------------- next part -------------- An HTML attachment was scrubbed... URL: From johnzbesko at alum.mit.edu Tue Sep 16 01:37:19 2008 From: johnzbesko at alum.mit.edu (John Zbesko) Date: Mon, 15 Sep 2008 20:37:19 -0500 Subject: [Ekiga-list] ekiga 2.9.90 (SVN version) regression using dv4lstart Message-ID: <1221529039.9148.7.camel@Zamd64> So, I tried the next-to-latest snapshot and my firewire camcorder worked with Ekiga! Today, the kubuntu updater installed the latest snapshot and it no longer works. Can this be fixed? Can I re-install the previous snapshot? Finally, presuming I get Ekiga working again with all my hardware, can someone point me to instructions on how I can video-conference with my son with a MacBook? From sevmek at free.fr Tue Sep 16 04:06:43 2008 From: sevmek at free.fr (yannick) Date: Tue, 16 Sep 2008 06:06:43 +0200 Subject: [Ekiga-list] ekiga 2.9.90 (SVN version) regression using dv4lstart In-Reply-To: <1221529039.9148.7.camel@Zamd64> References: <1221529039.9148.7.camel@Zamd64> Message-ID: <1221538003.1908.64.camel@achille> Le lundi 15 septembre 2008 ? 20:37 -0500, John Zbesko a ?crit : > So, I tried the next-to-latest snapshot and my firewire camcorder worked > with Ekiga! Today, the kubuntu updater installed the latest snapshot and > it no longer works. Can this be fixed? Can I re-install the previous > snapshot? > Hello, >From where did you take the packages? http://snapshots.ekiga.net/ ? If so can you install libpt-2.3-plugins-avc and libpt-2.3-plugins-dc packages? Best regards, Yannick > Finally, presuming I get Ekiga working again with all my hardware, can > someone point me to instructions on how I can video-conference with my > son with a MacBook? > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dsandras at seconix.com Tue Sep 16 08:08:39 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 16 Sep 2008 10:08:39 +0200 Subject: [Ekiga-list] DID, ATA and Ekiga In-Reply-To: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> References: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> Message-ID: <1221552519.4740.12.camel@scorpion.multitel.be> Le lundi 15 septembre 2008 ? 11:52 -0400, MacNean Tyrrell a ?crit : > Ok i'm done with Vonage/Verizon Voicewing. Just $30/month for the > amount I use it is crazy. I have successfully "hacked" (i hate that > word, I bought it i should be able to do with it what i want) my old > Linksys RTP300 from Vonage. I noticed that Ekiga offers a free sip > address. Is it possible to use this address with a did provider and > my rtp300? (I did search the mailing list, but I didn't find > anything, and I'll admit I could have missed it). I think so. Voxbone could work for example. Using such a DID provider, you simply associate the DID with @ekiga.net SIP address. > I noticed that Diamondcard is the recommended (well not forcing but > they give back to ekiga) and people that have it, is the 1.7cents a > minute for both out going and incoming calls? (obviously that rate is > for US) THe wiki and website are a little lite on information that I > saw. Also, anyone know if that rate is also for mobile calls? I think there is a page where you can see all call rates. It is even directly accessible from within Ekiga itself : https://www.diamondcard.us/exec/voip-login?act=sgn&spo=ekiga Apparently, it is also the same rate for mobiles. > Anyone use their DID service? And can you cancel? Like $2/month > isn't bad, but if ipkall ever registers me for a free DID i would > cancel the one from Diamondcard. Just trying to get all the info I > can before I spend any money on services. I would mail their support service. I can not answer those questions :( -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From elcomputo at yahoo.com Tue Sep 16 08:16:05 2008 From: elcomputo at yahoo.com (Martin Dodge) Date: Tue, 16 Sep 2008 01:16:05 -0700 (PDT) Subject: [Ekiga-list] No sound in or out Message-ID: <117202.47523.qm@web82602.mail.mud.yahoo.com> In response to my post last week that I could not get sound in or out on Ekiga, and that it told me to check to see what, if anything, was using the port assigned to Ekiga, I was told to check the port and to open ports 5000 through 5006. However, I was not told how to do that. I am not technically adept (which means I probably should not be using ubuntu in the first place). I need to be given step-by-step directions on everything. I hope these can be provided. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: From dardack at gmail.com Tue Sep 16 12:23:33 2008 From: dardack at gmail.com (MacNean Tyrrell) Date: Tue, 16 Sep 2008 08:23:33 -0400 Subject: [Ekiga-list] DID, ATA and Ekiga In-Reply-To: <1221552519.4740.12.camel@scorpion.multitel.be> References: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> <1221552519.4740.12.camel@scorpion.multitel.be> Message-ID: <871dac2b0809160523p7492aaafqb2578add0f92537c@mail.gmail.com> On Tue, Sep 16, 2008 at 4:08 AM, Damien Sandras wrote: > Le lundi 15 septembre 2008 ? 11:52 -0400, MacNean Tyrrell a ?crit : > > Ok i'm done with Vonage/Verizon Voicewing. Just $30/month for the > > amount I use it is crazy. I have successfully "hacked" (i hate that > > word, I bought it i should be able to do with it what i want) my old > > Linksys RTP300 from Vonage. I noticed that Ekiga offers a free sip > > address. Is it possible to use this address with a did provider and > > my rtp300? (I did search the mailing list, but I didn't find > > anything, and I'll admit I could have missed it). > > I think so. Voxbone could work for example. Using such a DID provider, > you simply associate the DID with @ekiga.net SIP address. > Ok, ipkall just sent me my phone number, so I'll have to log in and change the sip info. However, to put the info in the ATA ekiga uses the standard port of 5060 I assume, and standard codec g711 or whatever it is (i think my linksys gives me a lot of codecs to choose from) and then I would need to put in the sip proxy my username and password. Is there a way to tell this works without purchases minutes or whatnot from diamondcard first? Would I at least get a dialtone if it works? > > > I noticed that Diamondcard is the recommended (well not forcing but > > they give back to ekiga) and people that have it, is the 1.7cents a > > minute for both out going and incoming calls? (obviously that rate is > > for US) THe wiki and website are a little lite on information that I > > saw. Also, anyone know if that rate is also for mobile calls? > > I think there is a page where you can see all call rates. It is even > directly accessible from within Ekiga itself : > https://www.diamondcard.us/exec/voip-login?act=sgn&spo=ekiga > Yea i saw the call rates, but I guess I wasn't sure if it was both in and out calls at that same rate. I'll just have to email them. > > Apparently, it is also the same rate for mobiles. > > > Anyone use their DID service? And can you cancel? Like $2/month > > isn't bad, but if ipkall ever registers me for a free DID i would > > cancel the one from Diamondcard. Just trying to get all the info I > > can before I spend any money on services. > > I would mail their support service. I can not answer those questions :( > This may also be more for the email to Diamondcard, but the service gets charged per my sip address correct? So even if i have the ipkall DID directed towards the ekiga sip info the minutes charged will be against my diamondcard account, and same with outgoing? > > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : > http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Sincerely, MacNean C. Tyrrell -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Sep 16 14:36:52 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 16 Sep 2008 16:36:52 +0200 Subject: [Ekiga-list] DID, ATA and Ekiga In-Reply-To: <871dac2b0809160523p7492aaafqb2578add0f92537c@mail.gmail.com> References: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> <1221552519.4740.12.camel@scorpion.multitel.be> <871dac2b0809160523p7492aaafqb2578add0f92537c@mail.gmail.com> Message-ID: <1221575812.11833.18.camel@scorpion.multitel.be> Le mardi 16 septembre 2008 ? 08:23 -0400, MacNean Tyrrell a ?crit : > I think so. Voxbone could work for example. Using such a DID > provider, > you simply associate the DID with @ekiga.net SIP address. > > Ok, ipkall just sent me my phone number, so I'll have to log in and > change the sip info. However, to put the info in the ATA ekiga uses > the standard port of 5060 I assume, and standard codec g711 or > whatever it is (i think my linksys gives me a lot of codecs to choose > from) and then I would need to put in the sip proxy my username and > password. Is there a way to tell this works without purchases minutes > or whatnot from diamondcard first? Would I at least get a dialtone if > it works? If ipkall gives you a number you need to associate to a sip address, you do not need to use diamondcard, just ekiga.net. > This may also be more for the email to Diamondcard, but the service > gets charged per my sip address correct? So even if i have the ipkall > DID directed towards the ekiga sip info the minutes charged will be > against my diamondcard account, and same with outgoing? If you bought the DID elsewhere, you do not need diamondcard, just ekiga.net which also provides sip addresses. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dardack at gmail.com Tue Sep 16 16:17:23 2008 From: dardack at gmail.com (MacNean Tyrrell) Date: Tue, 16 Sep 2008 12:17:23 -0400 Subject: [Ekiga-list] DID, ATA and Ekiga In-Reply-To: <1221575812.11833.18.camel@scorpion.multitel.be> References: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> <1221552519.4740.12.camel@scorpion.multitel.be> <871dac2b0809160523p7492aaafqb2578add0f92537c@mail.gmail.com> <1221575812.11833.18.camel@scorpion.multitel.be> Message-ID: <871dac2b0809160917q3d82cb92i1d0791a2af640961@mail.gmail.com> On Tue, Sep 16, 2008 at 10:36 AM, Damien Sandras wrote: > Le mardi 16 septembre 2008 ? 08:23 -0400, MacNean Tyrrell a ?crit : > > > > I think so. Voxbone could work for example. Using such a DID > > provider, > > you simply associate the DID with @ekiga.net SIP address. > > > > Ok, ipkall just sent me my phone number, so I'll have to log in and > > change the sip info. However, to put the info in the ATA ekiga uses > > the standard port of 5060 I assume, and standard codec g711 or > > whatever it is (i think my linksys gives me a lot of codecs to choose > > from) and then I would need to put in the sip proxy my username and > > password. Is there a way to tell this works without purchases minutes > > or whatnot from diamondcard first? Would I at least get a dialtone if > > it works? > > If ipkall gives you a number you need to associate to a sip address, you > do not need to use diamondcard, just ekiga.net. > > > This may also be more for the email to Diamondcard, but the service > > gets charged per my sip address correct? So even if i have the ipkall > > DID directed towards the ekiga sip info the minutes charged will be > > against my diamondcard account, and same with outgoing? > > If you bought the DID elsewhere, you do not need diamondcard, just > ekiga.net which also provides sip addresses. > > Right, I meant for out calls to land lines i would need diamondcard correct? > > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : > http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Sincerely, MacNean C. Tyrrell -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Sep 16 16:37:49 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 16 Sep 2008 18:37:49 +0200 Subject: [Ekiga-list] DID, ATA and Ekiga In-Reply-To: <871dac2b0809160917q3d82cb92i1d0791a2af640961@mail.gmail.com> References: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> <1221552519.4740.12.camel@scorpion.multitel.be> <871dac2b0809160523p7492aaafqb2578add0f92537c@mail.gmail.com> <1221575812.11833.18.camel@scorpion.multitel.be> <871dac2b0809160917q3d82cb92i1d0791a2af640961@mail.gmail.com> Message-ID: <1221583069.15591.1.camel@scorpion.multitel.be> Le mardi 16 septembre 2008 ? 12:17 -0400, MacNean Tyrrell a ?crit : > > > On Tue, Sep 16, 2008 at 10:36 AM, Damien Sandras > wrote: > Le mardi 16 septembre 2008 ? 08:23 -0400, MacNean Tyrrell a > ?crit : > > > > I think so. Voxbone could work for example. Using > such a DID > > provider, > > you simply associate the DID with @ekiga.net SIP > address. > > > > Ok, ipkall just sent me my phone number, so I'll have to log > in and > > change the sip info. However, to put the info in the ATA > ekiga uses > > the standard port of 5060 I assume, and standard codec g711 > or > > whatever it is (i think my linksys gives me a lot of codecs > to choose > > from) and then I would need to put in the sip proxy my > username and > > password. Is there a way to tell this works without > purchases minutes > > or whatnot from diamondcard first? Would I at least get a > dialtone if > > it works? > > > If ipkall gives you a number you need to associate to a sip > address, you > do not need to use diamondcard, just ekiga.net. > > > This may also be more for the email to Diamondcard, but the > service > > gets charged per my sip address correct? So even if i have > the ipkall > > DID directed towards the ekiga sip info the minutes charged > will be > > against my diamondcard account, and same with outgoing? > > > If you bought the DID elsewhere, you do not need diamondcard, > just > ekiga.net which also provides sip addresses. > > Right, I meant for out calls to land lines i would need diamondcard > correct? Right. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jan.schampera at web.de Tue Sep 16 17:11:32 2008 From: jan.schampera at web.de (Jan Schampera) Date: Tue, 16 Sep 2008 19:11:32 +0200 Subject: [Ekiga-list] [Fwd: Multiple Outbound Proxy] Message-ID: <48CFE8C4.6070901@web.de> Forwarded to the Ekiga User Mailinglist: - http://mail.gnome.org/mailman/listinfo/ekiga-list - mailto:ekiga-list at gnome.org Forwarded Mail is attached. -- This is my life - this is my net! - Jan -------------- next part -------------- An embedded message was scrubbed... From: unknown sender Subject: no subject Date: no date Size: 10519 URL: From dardack at gmail.com Tue Sep 16 17:23:12 2008 From: dardack at gmail.com (MacNean Tyrrell) Date: Tue, 16 Sep 2008 13:23:12 -0400 Subject: [Ekiga-list] DID, ATA and Ekiga In-Reply-To: <1221583069.15591.1.camel@scorpion.multitel.be> References: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> <1221552519.4740.12.camel@scorpion.multitel.be> <871dac2b0809160523p7492aaafqb2578add0f92537c@mail.gmail.com> <1221575812.11833.18.camel@scorpion.multitel.be> <871dac2b0809160917q3d82cb92i1d0791a2af640961@mail.gmail.com> <1221583069.15591.1.camel@scorpion.multitel.be> Message-ID: <871dac2b0809161023ibe042bbtc61919f195451199@mail.gmail.com> > > > > Right, I meant for out calls to land lines i would need diamondcard > > correct? > > Right. > -- > _ Damien Sandras > (o- > > Thanks so much Damien. Hopefully 1 last question. For ipkall information: SIP Phone Number: SIP Proxy: Would the number be the ekiga alias or the xxx in sip:xxx at ekiga.net ? And I'm assuming the proxy is ekiga.net. (Going to try to set up an Asterisk for voicemail, hope I can get this all working. My wife thinks it's a little scammy (and no matter how much I try to convince her), but if we don't have to pay for incoming calls, all the better). -- Sincerely, MacNean C. Tyrrell -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Sep 16 17:25:25 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 16 Sep 2008 19:25:25 +0200 Subject: [Ekiga-list] DID, ATA and Ekiga In-Reply-To: <871dac2b0809161023ibe042bbtc61919f195451199@mail.gmail.com> References: <871dac2b0809150852w44ca6596tfb2f14fc95d05cf2@mail.gmail.com> <1221552519.4740.12.camel@scorpion.multitel.be> <871dac2b0809160523p7492aaafqb2578add0f92537c@mail.gmail.com> <1221575812.11833.18.camel@scorpion.multitel.be> <871dac2b0809160917q3d82cb92i1d0791a2af640961@mail.gmail.com> <1221583069.15591.1.camel@scorpion.multitel.be> <871dac2b0809161023ibe042bbtc61919f195451199@mail.gmail.com> Message-ID: <1221585925.15591.4.camel@scorpion.multitel.be> Le mardi 16 septembre 2008 ? 13:23 -0400, MacNean Tyrrell a ?crit : [...] > Thanks so much Damien. Hopefully 1 last question. For ipkall > information: > SIP Phone Number: > SIP Proxy: > > Would the number be the ekiga alias or the xxx in sip:xxx at ekiga.net? > And I'm assuming the proxy is ekiga.net. I suppose so... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From epetxepe at gmail.com Fri Sep 19 11:38:04 2008 From: epetxepe at gmail.com (Epelde Gorka) Date: Fri, 19 Sep 2008 13:38:04 +0200 Subject: [Ekiga-list] Ekiga 2.9.90. Can't use video-audio to communicate two distant places under NAT. Message-ID: <5ca9a62d0809190438n69e4b65do63e862e4aaa0227@mail.gmail.com> Hi all, I'm Gorka and I'm new to the list. I'm trying your latest release 2.9.90 at two Ubuntu Hardy machines behind NAT's. But behind NAT's I can't use video-audio, only local video-audio is shown. I have had great results having them in the same network. In older versions it was possible to cofigure a stun server, but in version 2.9.90 network configuration is automatic. I would like to force it to use stun. Could you give an example on how to touch ekiga's configuration files. I've reached to "/home/epetxepe/.gconf/apps/ekiga/protocols/%gconf.xml", which I think it could be the file to touch, but no idea on how to touch it. Bests, Gorka From michel.memeteau at gmail.com Fri Sep 19 11:42:23 2008 From: michel.memeteau at gmail.com (michel memeteau) Date: Fri, 19 Sep 2008 13:42:23 +0200 Subject: [Ekiga-list] Ekiga 2.9.90. Can't use video-audio to communicate two distant places under NAT. In-Reply-To: <5ca9a62d0809190438n69e4b65do63e862e4aaa0227@mail.gmail.com> References: <5ca9a62d0809190438n69e4b65do63e862e4aaa0227@mail.gmail.com> Message-ID: On Fri, Sep 19, 2008 at 1:38 PM, Epelde Gorka wrote: > I have had great results having them in the same network. > In older versions it was possible to cofigure a stun server, but in > version 2.9.90 network configuration is automatic. I would like to > force it to use stun. It always use stun now as I read. Runing Ekiga from the commandline should tell you "badNatType" if you are in front of a problematic network. Both end won't show distant audio/video ? > Could you give an example on how to touch ekiga's configuration > files. I've reached to > "/home/epetxepe/.gconf/apps/ekiga/protocols/%gconf.xml", which I think > it could be the file to touch, but no idea on how to touch it. From Eugen.Dedu at pu-pm.univ-fcomte.fr Fri Sep 19 12:16:58 2008 From: Eugen.Dedu at pu-pm.univ-fcomte.fr (Eugen Dedu) Date: Fri, 19 Sep 2008 14:16:58 +0200 Subject: [Ekiga-list] Ekiga 2.9.90. Can't use video-audio to communicate two distant places under NAT. In-Reply-To: References: <5ca9a62d0809190438n69e4b65do63e862e4aaa0227@mail.gmail.com> Message-ID: <48D3983A.4050601@pu-pm.univ-fcomte.fr> michel memeteau wrote: > On Fri, Sep 19, 2008 at 1:38 PM, Epelde Gorka wrote: >> I have had great results having them in the same network. >> In older versions it was possible to cofigure a stun server, but in >> version 2.9.90 network configuration is automatic. I would like to >> force it to use stun. > > It always use stun now as I read. > > Runing Ekiga from the commandline should tell you "badNatType" if you > are in front of a problematic network. Since about 1 month, ekiga shows a dialog box (instead of "badNatType" message) with a few information. -- Eugen From epetxepe at gmail.com Fri Sep 19 12:31:50 2008 From: epetxepe at gmail.com (Epelde Gorka) Date: Fri, 19 Sep 2008 14:31:50 +0200 Subject: [Ekiga-list] Ekiga 2.9.90. Can't use video-audio to communicate two distant places under NAT. In-Reply-To: <48D3983A.4050601@pu-pm.univ-fcomte.fr> References: <5ca9a62d0809190438n69e4b65do63e862e4aaa0227@mail.gmail.com> <48D3983A.4050601@pu-pm.univ-fcomte.fr> Message-ID: <5ca9a62d0809190531j6519e3f1me65947fc478332db@mail.gmail.com> Test number 1: I did some test this morning. Home -- work I was receiving that message at home, so i configured ports and I was able to receive video-audio at home, but my colleges were not able receive my video-audio. At work, there was no port issue. How could I solve portforwarding issue? Some router firmware update maybe? Test number 2: At work I have tried via neighborhood and works correctly. At work if I try to connect them via ekiga.net addresses it doesn't work. Doesn't work either throught two different gateways. This is the last output I'm receiving right now: ekiga -d 1 2008/09/19 14:30:06.059 0:06.463 ThreadID:0xb517bb90 PWLib Destroyed thread 0x834c008 StunDetector:0xb517bb90(id = 0) 2008/09/19 14:30:06.487 0:06.891 Opal Liste...0xb51fdb90 Listen UDP read error. Gorka 2008/9/19 Eugen Dedu : > michel memeteau wrote: >> >> On Fri, Sep 19, 2008 at 1:38 PM, Epelde Gorka wrote: >>> >>> I have had great results having them in the same network. >>> In older versions it was possible to cofigure a stun server, but in >>> version 2.9.90 network configuration is automatic. I would like to >>> force it to use stun. >> >> It always use stun now as I read. >> >> Runing Ekiga from the commandline should tell you "badNatType" if you >> are in front of a problematic network. > > Since about 1 month, ekiga shows a dialog box (instead of "badNatType" > message) with a few information. > > -- > Eugen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From eccn at spherica.demon.co.uk Sun Sep 21 21:37:16 2008 From: eccn at spherica.demon.co.uk (eccn) Date: Sun, 21 Sep 2008 22:37:16 +0100 Subject: [Ekiga-list] Gem video examples change my capture card settings Message-ID: <1222033036.5950.1.camel@matt-desktop> Hello after much lurking Just discovered pd-extended, and am now playing with live video via a PCI capture card. Very happy! But can anyone tell me why running any of the Gem video examples seems to change my video capture card's mode to some non-PAL setting? (My camera is PAL). Can I specify this as a default setting somehow? The OS here is Linux Ubuntu Studio (Hardy). I have a generic BT878-based tuner/capture card, which reports as follows after typing 'lspci': 00:0e.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) 00:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) Many thanks in advance. Matt NE Wales, UK PS. Apologies for stupidly posting to pd-list at iem.at , thinking that was the mailing list address. Duh. From dsandras at seconix.com Mon Sep 22 08:06:27 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 22 Sep 2008 10:06:27 +0200 Subject: [Ekiga-list] Gem video examples change my capture card settings In-Reply-To: <1222033036.5950.1.camel@matt-desktop> References: <1222033036.5950.1.camel@matt-desktop> Message-ID: <1222070787.4618.14.camel@scorpion.multitel.be> Le dimanche 21 septembre 2008 ? 22:37 +0100, eccn a ?crit : > Hello after much lurking > > Just discovered pd-extended, and am now playing with live video via a > PCI capture card. Very happy! > > But can anyone tell me why running any of the Gem video examples seems > to change my video capture card's mode to some non-PAL setting? (My > camera is PAL). Can I specify this as a default setting somehow? > > The OS here is Linux Ubuntu Studio (Hardy). I have a generic BT878-based > tuner/capture card, which reports as follows after typing 'lspci': > > 00:0e.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture (rev 02) > > 00:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > (rev 02) > > > > Many thanks in advance. > > Matt > NE Wales, UK > > PS. Apologies for stupidly posting to pd-list at iem.at , thinking that was the mailing list address. Duh. You posted to ekiga-list... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From eccn at spherica.demon.co.uk Mon Sep 22 20:43:56 2008 From: eccn at spherica.demon.co.uk (eccn) Date: Mon, 22 Sep 2008 21:43:56 +0100 Subject: [Ekiga-list] Gem video examples change my capture card settings In-Reply-To: <1222033036.5950.1.camel@matt-desktop> References: <1222033036.5950.1.camel@matt-desktop> Message-ID: <1222116236.5904.6.camel@matt-desktop> sincere apologies, wrong list will try harder M From johnzbesko at alum.mit.edu Tue Sep 23 04:37:32 2008 From: johnzbesko at alum.mit.edu (John Zbesko) Date: Mon, 22 Sep 2008 23:37:32 -0500 Subject: [Ekiga-list] Working/Not working series of snapshots Message-ID: <1222144652.32112.6.camel@Zamd64> I have been updating snapshots using: http://snapshots.ekiga.net/snapshots/ubuntu/ The most recent snapshot does not work with my Firewire dv camcorder (using dv4lstart), but the previous snapshot did, which fixed the problem with the snapshot before it. The most recent snapshot removed a bunch of lib packages that may explain why my camcorder no longer works. Hope this helps. Waiting for the next snapshot ;-) From sevmek at free.fr Tue Sep 23 05:28:40 2008 From: sevmek at free.fr (yannick) Date: Tue, 23 Sep 2008 07:28:40 +0200 Subject: [Ekiga-list] Working/Not working series of snapshots In-Reply-To: <1222144652.32112.6.camel@Zamd64> References: <1222144652.32112.6.camel@Zamd64> Message-ID: <1222147720.22831.7.camel@achille> Le lundi 22 septembre 2008 ? 23:37 -0500, John Zbesko a ?crit : > I have been updating snapshots using: > > http://snapshots.ekiga.net/snapshots/ubuntu/ > > The most recent snapshot does not work with my Firewire dv camcorder > (using dv4lstart), but the previous snapshot did, which fixed the > problem with the snapshot before it. > > The most recent snapshot removed a bunch of lib packages that may > explain why my camcorder no longer works. > Try this: $ sudo aptitude install ekiga-snapshot-plugins-all-devices > Hope this helps. Waiting for the next snapshot ;-) > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From johnzbesko at alum.mit.edu Wed Sep 24 00:39:59 2008 From: johnzbesko at alum.mit.edu (John Zbesko) Date: Tue, 23 Sep 2008 19:39:59 -0500 Subject: [Ekiga-list] Working/Not working series of snapshots In-Reply-To: <1222147720.22831.7.camel@achille> References: <1222144652.32112.6.camel@Zamd64> <1222147720.22831.7.camel@achille> Message-ID: <1222216799.23665.1.camel@Zamd64> Thank you. Your suggestion worked. On Tue, 2008-09-23 at 07:28 +0200, yannick wrote: > sudo aptitude install ekiga-snapshot-plugins-all-devices From dsandras at seconix.com Wed Sep 24 11:14:53 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 24 Sep 2008 13:14:53 +0200 Subject: [Ekiga-list] [ANNOUNCE] Ekiga 3.00 aka "The Scheherazade release" available Message-ID: <1222254893.26007.6.camel@scorpion.multitel.be> This is the long awaited Ekiga 3.00 release with a long list of new features! After 1001 nights of coding, the Ekiga team is proud to present the latest incarnation of Ekiga! I would like to thank everyone who has participated in this release. Ekiga 3.0.0 is a major release in the sense that there are now major contributors without who there would not be so many features : Matthias Schneider, Julien Puydt, Jan Schampera have worked daily on Ekiga. Eugen Dedu has participated with Yannick Defais to the revival of the nightly precompiled snapshots. I would also like to thank Yannick Defais for his work on the WIKI, documentation, testing, ... * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/3.0 * What's changed ? ================== Here is a summary of the new features. Only major features are listed here. Graphical User Interface * New user interface with a buddy list * Accelerated video display (Unix: XVideo, Windows: DirectDraw) * Nice incoming call notifications * Easier configuration assistant * New quality meter in the status bar * Buddy list with extended status information * Displays network neighbours in the buddy list * Better keyboard shortcuts * Automatic account completion in the URL bar * New chat window * New address book supporting Evolution contacts, LDAP contacts and more * New account window allowing easier account creation * New call panel Codecs * H.263+ * H.264 * THEORA * MPEG4 * Framerate up to 30 FPS * Resolutions (up to 704x576) (at best it is DVD quality) * Audio and video codecs as plugins * Support for Intel IPP codecs SIP Support * SIP/SIMPLE presence support * Line monitoring with software like Asterisk * Custom presence message support * Dynamic detection of network interfaces * Register/unregister accounts on interfaces going up and down * Better NAT traversal * SIP requests originated from a unique port * Support for several network interfaces at the same time (e.g. VPN and normal network) * Full SIP capabilties exchange for codecs (unique in the Open Source world) * SIP INFO DTMF support * Possibility to send SMS using the Ekiga Call Out account * Many compliance fixes * Hotplug Support * Hotplug support for audio and video devices (even when being in a call) * Hotplug support for network interfaces For Developers and Packagers * Brand new Ekiga Engine, fully separated from the GUI and reusable in other projects * Reworked WIN32 build * Better autoconf support for OPAL -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From martin.kurtz at gmx.net Wed Sep 24 21:14:50 2008 From: martin.kurtz at gmx.net (Martin Kurtz) Date: Wed, 24 Sep 2008 23:14:50 +0200 Subject: [Ekiga-list] unwanted automatical change in ekiga's network config Message-ID: <1222290890.16495.14.camel@martin-desktop> Hello, I am using Ekiga, I really like the programm, but i'm expiriencing a very annoying issue with it. (ekiga 2.0.12) My Network-Environment looks like this: eth0 - local ethernet, which is used for the SIP-Connection ppp0 - a VPN-Connection that leads me out of the local into the www Yes, our local network provides the SIP-Connection! So in the Network-Option i choose "eth0", and it worked. But next time i started the program, it changed the option to "ppp0" again. And then it won't connect. Is there any way to force ekiga to choose eth0? Thanks a lot. Martin From dsandras at seconix.com Wed Sep 24 21:25:10 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 24 Sep 2008 23:25:10 +0200 Subject: [Ekiga-list] unwanted automatical change in ekiga's network config In-Reply-To: <1222290890.16495.14.camel@martin-desktop> References: <1222290890.16495.14.camel@martin-desktop> Message-ID: <1222291510.4762.32.camel@scorpion.multitel.be> Le mercredi 24 septembre 2008 ? 23:14 +0200, Martin Kurtz a ?crit : > Hello, > > I am using Ekiga, I really like the programm, but i'm expiriencing a > very annoying issue with it. (ekiga 2.0.12) > > My Network-Environment looks like this: > > eth0 - local ethernet, which is used for the SIP-Connection > ppp0 - a VPN-Connection that leads me out of the local into the www > > > Yes, our local network provides the SIP-Connection! > > > So in the Network-Option i choose "eth0", and it worked. But next time i > started the program, it changed the option to "ppp0" again. > And then it won't connect. Is there any way to force ekiga to choose > eth0? 3.00 fixes that... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From martin.kurtz at gmx.net Wed Sep 24 21:44:16 2008 From: martin.kurtz at gmx.net (Martin Kurtz) Date: Wed, 24 Sep 2008 23:44:16 +0200 Subject: [Ekiga-list] unwanted automatical change in ekiga's network config In-Reply-To: <1222291510.4762.32.camel@scorpion.multitel.be> References: <1222290890.16495.14.camel@martin-desktop> <1222291510.4762.32.camel@scorpion.multitel.be> Message-ID: <1222292656.16495.15.camel@martin-desktop> alright! when is it going to be released? On Mi, 2008-09-24 at 23:25 +0200, Damien Sandras wrote: > Le mercredi 24 septembre 2008 ? 23:14 +0200, Martin Kurtz a ?crit : > > Hello, > > > > I am using Ekiga, I really like the programm, but i'm expiriencing a > > very annoying issue with it. (ekiga 2.0.12) > > > > My Network-Environment looks like this: > > > > eth0 - local ethernet, which is used for the SIP-Connection > > ppp0 - a VPN-Connection that leads me out of the local into the www > > > > > > Yes, our local network provides the SIP-Connection! > > > > > > So in the Network-Option i choose "eth0", and it worked. But next time i > > started the program, it changed the option to "ppp0" again. > > And then it won't connect. Is there any way to force ekiga to choose > > eth0? > > 3.00 fixes that... > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From sevmek at free.fr Wed Sep 24 21:52:02 2008 From: sevmek at free.fr (yannick) Date: Wed, 24 Sep 2008 23:52:02 +0200 Subject: [Ekiga-list] unwanted automatical change in ekiga's network config In-Reply-To: <1222292656.16495.15.camel@martin-desktop> References: <1222290890.16495.14.camel@martin-desktop> <1222291510.4762.32.camel@scorpion.multitel.be> <1222292656.16495.15.camel@martin-desktop> Message-ID: <1222293122.18892.4.camel@achille> Le mercredi 24 septembre 2008 ? 23:44 +0200, Martin Kurtz a ?crit : > alright! when is it going to be released? Read this: http://ekiga.org/ > > > > > On Mi, 2008-09-24 at 23:25 +0200, Damien Sandras wrote: > > Le mercredi 24 septembre 2008 ? 23:14 +0200, Martin Kurtz a ?crit : > > > Hello, > > > > > > I am using Ekiga, I really like the programm, but i'm expiriencing a > > > very annoying issue with it. (ekiga 2.0.12) > > > > > > My Network-Environment looks like this: > > > > > > eth0 - local ethernet, which is used for the SIP-Connection > > > ppp0 - a VPN-Connection that leads me out of the local into the www > > > > > > > > > Yes, our local network provides the SIP-Connection! > > > > > > > > > So in the Network-Option i choose "eth0", and it worked. But next time i > > > started the program, it changed the option to "ppp0" again. > > > And then it won't connect. Is there any way to force ekiga to choose > > > eth0? > > > > 3.00 fixes that... > > -- > > _ Damien Sandras > > (o- > > //\ Ekiga Softphone : http://www.ekiga.org/ > > v_/_ NOVACOM : http://www.novacom.be/ > > FOSDEM : http://www.fosdem.org/ > > SIP Phone : sip:dsandras at ekiga.net > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From martin.kurtz at gmx.net Thu Sep 25 12:52:23 2008 From: martin.kurtz at gmx.net (Martin Kurtz) Date: Thu, 25 Sep 2008 14:52:23 +0200 Subject: [Ekiga-list] unwanted automatical change in ekiga's network config In-Reply-To: <1222291510.4762.32.camel@scorpion.multitel.be> References: <1222290890.16495.14.camel@martin-desktop> <1222291510.4762.32.camel@scorpion.multitel.be> Message-ID: <1222347143.8529.3.camel@martin-desktop> "3.00 fixes that..." i just compiled 3.00, but now the interface-option is entirely missing. is that normal? another thing: in audio->devices there is everything grey. it says like: PTLIB/ALSA/Default But i cannont choose my usb-microfin for example. A failure in compiling? Thanks again On Mi, 2008-09-24 at 23:25 +0200, Damien Sandras wrote: > Le mercredi 24 septembre 2008 ? 23:14 +0200, Martin Kurtz a ?crit : > > Hello, > > > > I am using Ekiga, I really like the programm, but i'm expiriencing a > > very annoying issue with it. (ekiga 2.0.12) > > > > My Network-Environment looks like this: > > > > eth0 - local ethernet, which is used for the SIP-Connection > > ppp0 - a VPN-Connection that leads me out of the local into the www > > > > > > Yes, our local network provides the SIP-Connection! > > > > > > So in the Network-Option i choose "eth0", and it worked. But next time i > > started the program, it changed the option to "ppp0" again. > > And then it won't connect. Is there any way to force ekiga to choose > > eth0? > > 3.00 fixes that... > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From sevmek at free.fr Thu Sep 25 16:25:27 2008 From: sevmek at free.fr (yannick) Date: Thu, 25 Sep 2008 18:25:27 +0200 Subject: [Ekiga-list] unwanted automatical change in ekiga's network config In-Reply-To: <1222347143.8529.3.camel@martin-desktop> References: <1222290890.16495.14.camel@martin-desktop> <1222291510.4762.32.camel@scorpion.multitel.be> <1222347143.8529.3.camel@martin-desktop> Message-ID: <1222359927.18892.9.camel@achille> Le jeudi 25 septembre 2008 ? 14:52 +0200, Martin Kurtz a ?crit : > "3.00 fixes that..." > > i just compiled 3.00, but now the interface-option is entirely missing. > is that normal? > > another thing: > in audio->devices there is everything grey. it says like: > PTLIB/ALSA/Default > > But i cannont choose my usb-microfin for example. > A failure in compiling? That probably means Ekiga cannot find the ptlib plugins for ALSA etc. > > > > Thanks again > > > > > > On Mi, 2008-09-24 at 23:25 +0200, Damien Sandras wrote: > > Le mercredi 24 septembre 2008 ? 23:14 +0200, Martin Kurtz a ?crit : > > > Hello, > > > > > > I am using Ekiga, I really like the programm, but i'm expiriencing a > > > very annoying issue with it. (ekiga 2.0.12) > > > > > > My Network-Environment looks like this: > > > > > > eth0 - local ethernet, which is used for the SIP-Connection > > > ppp0 - a VPN-Connection that leads me out of the local into the www > > > > > > > > > Yes, our local network provides the SIP-Connection! > > > > > > > > > So in the Network-Option i choose "eth0", and it worked. But next time i > > > started the program, it changed the option to "ppp0" again. > > > And then it won't connect. Is there any way to force ekiga to choose > > > eth0? > > > > 3.00 fixes that... > > -- > > _ Damien Sandras > > (o- > > //\ Ekiga Softphone : http://www.ekiga.org/ > > v_/_ NOVACOM : http://www.novacom.be/ > > FOSDEM : http://www.fosdem.org/ > > SIP Phone : sip:dsandras at ekiga.net > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From 1.41421 at gmail.com Thu Sep 25 17:27:48 2008 From: 1.41421 at gmail.com (JCA) Date: Thu, 25 Sep 2008 11:27:48 -0600 Subject: [Ekiga-list] Upgrading to 3.0 Message-ID: I have upgraded to Ekiga 3.0 and, much to my dismay, the info I had in my address book is gone. I still have the names, but not the phone numbers. Are they really gone for good, or can they be at all retrieved? From dsandras at seconix.com Thu Sep 25 17:52:00 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 25 Sep 2008 19:52:00 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: References: Message-ID: <1222365120.4509.8.camel@scorpion.multitel.be> Le jeudi 25 septembre 2008 ? 11:27 -0600, JCA a ?crit : > I have upgraded to Ekiga 3.0 and, much to my dismay, the info I > had in my address book is gone. I still have the names, but not the > phone numbers. Are they really gone for good, or can they be at all > retrieved? If you right click, doesn't it give you the option to call using the phone number ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Sep 25 17:53:12 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 25 Sep 2008 19:53:12 +0200 Subject: [Ekiga-list] unwanted automatical change in ekiga's network config In-Reply-To: <1222359927.18892.9.camel@achille> References: <1222290890.16495.14.camel@martin-desktop> <1222291510.4762.32.camel@scorpion.multitel.be> <1222347143.8529.3.camel@martin-desktop> <1222359927.18892.9.camel@achille> Message-ID: <1222365192.4509.11.camel@scorpion.multitel.be> Le jeudi 25 septembre 2008 ? 18:25 +0200, yannick a ?crit : > Le jeudi 25 septembre 2008 ? 14:52 +0200, Martin Kurtz a ?crit : > > "3.00 fixes that..." > > > > i just compiled 3.00, but now the interface-option is entirely missing. > > is that normal? Yes, things are automatic. It can now bind to all interfaces at the same time and give correct results when registering or when dialing out. > > another thing: > > in audio->devices there is everything grey. it says like: > > PTLIB/ALSA/Default > > > > But i cannont choose my usb-microfin for example. > > A failure in compiling? > > That probably means Ekiga cannot find the ptlib plugins for ALSA etc. The only way to have things being grayed out and unsensitive is to have configured gconf to make those settings unmodifiable... Weird! Can you post a screenshot somewhere ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From fmkaiser at gmail.com Thu Sep 25 18:17:33 2008 From: fmkaiser at gmail.com (Florian Kaiser) Date: Thu, 25 Sep 2008 20:17:33 +0200 Subject: [Ekiga-list] Ekiga 3.0 Win32: Problems with PTLIB / OPAL Message-ID: Hello, I successfully compiled Ekiga 3.0 for Win32 thanks to the wiki page. It is possible to start the application and make a call. However, there seems to be a problem with ptlib / opal. In the settings, there are no audio devices listed, only SILENT / NULL is available. Furthermore, only basic audio codecs (PCMA/PCMU) and no video codecs are listed. The plugins directory with the pwlib plugins is present. I observed this behavior on two machines, both running Windows XP. Any pointers would be greatly appreciated. Florian -------------- next part -------------- An HTML attachment was scrubbed... URL: From fmkaiser at gmail.com Thu Sep 25 19:18:52 2008 From: fmkaiser at gmail.com (Florian Kaiser) Date: Thu, 25 Sep 2008 21:18:52 +0200 Subject: [Ekiga-list] Ekiga 3.0 Win32: Problems with PTLIB / OPAL In-Reply-To: References: Message-ID: I managed to get some debug output - again thanks to the very useful wiki: http://fmkaiser.de/pub/ekiga3_win32.log Apparently, opal and ptlib are successfully loaded. It just doesn't find the devices / codecs. For comparison some debug output of my linux machine, where everything works fine: http://fmkaiser.de/pub/ekiga3_linux.log Hope this helps. Florian -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Thu Sep 25 19:23:25 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 25 Sep 2008 21:23:25 +0200 Subject: [Ekiga-list] Ekiga 3.0 Win32: Problems with PTLIB / OPAL In-Reply-To: References: Message-ID: <1222370605.4509.17.camel@scorpion.multitel.be> Le jeudi 25 septembre 2008 ? 21:18 +0200, Florian Kaiser a ?crit : > I managed to get some debug output - again thanks to the very useful > wiki: > http://fmkaiser.de/pub/ekiga3_win32.log > > Apparently, opal and ptlib are successfully loaded. > It just doesn't find the devices / codecs. > > For comparison some debug output of my linux machine, where everything > works fine: > http://fmkaiser.de/pub/ekiga3_linux.log > > Hope this helps. It is still a work in progress. Probably the audio and video, devices and codecs are not compiled in for some reason... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Sep 25 20:52:39 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 25 Sep 2008 22:52:39 +0200 Subject: [Ekiga-list] unwanted automatical change in ekiga's network config In-Reply-To: <1222365192.4509.11.camel@scorpion.multitel.be> References: <1222290890.16495.14.camel@martin-desktop> <1222291510.4762.32.camel@scorpion.multitel.be> <1222347143.8529.3.camel@martin-desktop> <1222359927.18892.9.camel@achille> <1222365192.4509.11.camel@scorpion.multitel.be> Message-ID: <1222375959.4509.21.camel@scorpion.multitel.be> Le jeudi 25 septembre 2008 ? 19:53 +0200, Damien Sandras a ?crit : > Le jeudi 25 septembre 2008 ? 18:25 +0200, yannick a ?crit : > > Le jeudi 25 septembre 2008 ? 14:52 +0200, Martin Kurtz a ?crit : > > > "3.00 fixes that..." > > > > > > i just compiled 3.00, but now the interface-option is entirely missing. > > > is that normal? > > Yes, things are automatic. It can now bind to all interfaces at the same > time and give correct results when registering or when dialing out. > > > > another thing: > > > in audio->devices there is everything grey. it says like: > > > PTLIB/ALSA/Default > > > > > > But i cannont choose my usb-microfin for example. > > > A failure in compiling? > > > > That probably means Ekiga cannot find the ptlib plugins for ALSA etc. > > The only way to have things being grayed out and unsensitive is to have > configured gconf to make those settings unmodifiable... Weird! Can you > post a screenshot somewhere ? or like yannick said, I had forgotten I implemented that a few weeks ago. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jdh13 at free.fr Sat Sep 27 09:51:19 2008 From: jdh13 at free.fr (jdh13) Date: Sat, 27 Sep 2008 11:51:19 +0200 Subject: [Ekiga-list] pc-to-phone recommandations? Message-ID: <48DE0217.7090500@free.fr> hello all, i'm using ekiga on my laptop (opensolaris) and i want to buy units to do cals to people not having a computer. Does anybody have recommandations? or user's experience? I'm wondering if this service is well suited (i know skype's users having some troubles) Thanks in advance, gerard From 1.41421 at gmail.com Sat Sep 27 14:03:06 2008 From: 1.41421 at gmail.com (JCA) Date: Sat, 27 Sep 2008 08:03:06 -0600 Subject: [Ekiga-list] Upgrading to 3.0 Message-ID: > Le jeudi 25 septembre 2008 ? 11:27 -0600, JCA a ?crit : >> I have upgraded to Ekiga 3.0 and, much to my dismay, the info I >> had in my address book is gone. I still have the names, but not the >> phone numbers. Are they really gone for good, or can they be at all >> retrieved? > > If you right click, doesn't it give you the option to call using the > phone number ? No. I get a menu with four items: Edit, Remove, Refresh and New Contact. When selecting Edit I get another window containing boxes for Name, VoIP URI, Home phone, Office phone, Cell phone and Pager - but, with the exception of Name, the boxes are empty. The numbers I had under Ekiga 2.0.12 are gone :-( From wheeldweller at gmail.com Sat Sep 27 14:53:36 2008 From: wheeldweller at gmail.com (Brian Fahrlander) Date: Sat, 27 Sep 2008 09:53:36 -0500 Subject: [Ekiga-list] Logitech Webcam (Not "GO") solution Message-ID: <48DE48F0.8050109@gmail.com> Back when I was a highly-paid engineer in Chicago, one of these little Logitech Webcams got into my stable of parts- musta been 1996-97. I wasted THREE HOURS trying to get the thing working under Windows, but grinned brightly when I plugged it into Linux and it worked right out of the box. Fast forward to now: I just spent my 5th hour and final hour going over google, trying to re-establish this kind of relationship. Everything's newer now, and I understand that, going to 0v511-jpeg, spcxxx, and so on. But short of getting out the source code and wasting the afternoon (why?) I thought I'd ask if someone in this audience has one of them working. Maybe I'll get a reply before someone empties the trashcan. :) I'm running a very 'clean' Ubuntu Hardy, no sourcecode or special projects to get in the way. I'm getting the 'usb-returned -28' thing, which I'm told is supposed to be the same as "no space left on device". I really don't want to break into source code; I shouldn't have to- it's the foundational device on which all these others were built, and it once took nothing at all. (We're regressing the way Microsoft's been doing, lately). If you have one of these under Linux, didn't have to hack into the source code, let me know, aye? I'd sure appreciate it. -- ------------------------------------------------------------------------ Brian Fahrl?nder Christian, Conservative, and Technomad Evansville, IN ICQ: 5119262 AOL/Yahoo/GoogleTalk: WheelDweller ------------------------------------------------------------------------ From dsandras at seconix.com Sat Sep 27 18:58:20 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 27 Sep 2008 20:58:20 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: References: Message-ID: <1222541900.4421.29.camel@scorpion.multitel.be> Le samedi 27 septembre 2008 ? 08:03 -0600, JCA a ?crit : > > Le jeudi 25 septembre 2008 ? 11:27 -0600, JCA a ?crit : > >> I have upgraded to Ekiga 3.0 and, much to my dismay, the info I > >> had in my address book is gone. I still have the names, but not the > >> phone numbers. Are they really gone for good, or can they be at all > >> retrieved? > > > > If you right click, doesn't it give you the option to call using the > > phone number ? > > No. I get a menu with four items: Edit, Remove, Refresh and New > Contact. When selecting Edit I get another window containing boxes for > Name, VoIP URI, Home phone, Office phone, Cell phone and Pager - but, > with the exception of Name, the boxes are empty. The numbers I had > under Ekiga 2.0.12 are gone :-( Those numbers are stored in Evolution's addressbook. If they disappeared, there are three possibilities : 1) you were running the non-Gnome version and now you are running the Gnome version of Ekiga 2) the opposite 3) a bug in evolution-data-server But Ekiga still works the same regarding the phone numbers. They are even stored in an external entity. So there is no risk of loosing them. The only different thing is that they are not displayed by default, you have to right-click... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sat Sep 27 18:58:58 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 27 Sep 2008 20:58:58 +0200 Subject: [Ekiga-list] pc-to-phone recommandations? In-Reply-To: <48DE0217.7090500@free.fr> References: <48DE0217.7090500@free.fr> Message-ID: <1222541938.4421.31.camel@scorpion.multitel.be> Le samedi 27 septembre 2008 ? 11:51 +0200, jdh13 a ?crit : > hello all, > i'm using ekiga on my laptop (opensolaris) and i want to buy units to do > cals to people not having a computer. Does anybody have recommandations? > or user's experience? I'm wondering if this service is well suited (i > know skype's users having some troubles) I don't have specific recommendations, but several users reported that the provider suggested by ekiga was good enough... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From oisin.feeley at gmail.com Sat Sep 27 19:04:50 2008 From: oisin.feeley at gmail.com (Oisin Feeley) Date: Sat, 27 Sep 2008 15:04:50 -0400 Subject: [Ekiga-list] pc-to-phone recommandations? In-Reply-To: <1222541938.4421.31.camel@scorpion.multitel.be> References: <48DE0217.7090500@free.fr> <1222541938.4421.31.camel@scorpion.multitel.be> Message-ID: Yes, Diamondcard has been getting my business for the past year and a bit and I have no objections. Their service seems on a par with other comparably priced providers. best wishes, Oisin Feeley From sevmek at free.fr Sat Sep 27 19:38:52 2008 From: sevmek at free.fr (yannick) Date: Sat, 27 Sep 2008 21:38:52 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) Message-ID: <1222544332.18892.26.camel@achille> Hello, I've made some packages for Ubuntu. Before uploading them on ekiga.org, i would like to have some volunteers to test them. Do they install properly? Run fine? Can you quit properly? Can you place a call to sip:500 at ekiga.net ? Those kind of stuff. I would also know if your settings are preserved during the upgrade from 2.0.x. (like your phone numbers...) Give it a try while it's hot: https://launchpad.net/~sevmek/+archive Best regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From geo.cherchetout at laposte.net Sat Sep 27 19:45:23 2008 From: geo.cherchetout at laposte.net (gegetel) Date: Sat, 27 Sep 2008 21:45:23 +0200 Subject: [Ekiga-list] pc-to-phone recommandations? In-Reply-To: <48DE0217.7090500@free.fr> References: <48DE0217.7090500@free.fr> Message-ID: <48DE8D53.9070509@laposte.net> On 09.27.2008 11:51, *jdh13* wrote : > hello all, > i'm using ekiga on my laptop (opensolaris) and i want to buy units to do > cals to people not having a computer. Does anybody have recommandations? > or user's experience? I'm wondering if this service is well suited (i > know skype's users having some troubles) > > Thanks in advance, > > gerard Wengo is my favourite because Wengos are not expensive. With Ekiga 3.0.0, using my wengo's account is easier than with Ekiga 2.x.x since picking an outbound proxy is no more needed. (I don't understand, i note.) Gerard From andre at bwh.harvard.edu Sat Sep 27 19:52:27 2008 From: andre at bwh.harvard.edu (Andre Robatino) Date: Sat, 27 Sep 2008 15:52:27 -0400 Subject: [Ekiga-list] pc-to-phone recommandations? In-Reply-To: References: <48DE0217.7090500@free.fr> <1222541938.4421.31.camel@scorpion.multitel.be> Message-ID: <48DE8EFB.3000204@bwh.harvard.edu> Oisin Feeley wrote: > Yes, Diamondcard has been getting my business for the past year and a > bit and I have no objections. Their service seems on a par with other > comparably priced providers. Their per-minute charge for calls to the US is cheaper than Skype's (1.7 cents vs. 2.1 cents/min) but unfortunately, they don't appear to have a cheap flat-fee option like Skype ($2.95/month, or less if you pay quarterly or yearly) so if you use more than about 150 minutes/month, Skype is cheaper. Which is too bad since I've noticed that Ekiga's voice quality when using Diamondcard is much better (comparable to POTS as opposed to much worse with Skype). I don't know if that's true in general or just due to my local network conditions. -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3266 bytes Desc: S/MIME Cryptographic Signature URL: From michel.memeteau at gmail.com Sat Sep 27 21:01:42 2008 From: michel.memeteau at gmail.com (michel memeteau) Date: Sat, 27 Sep 2008 23:01:42 +0200 Subject: [Ekiga-list] pc-to-phone recommandations? In-Reply-To: <48DE8EFB.3000204@bwh.harvard.edu> References: <48DE0217.7090500@free.fr> <1222541938.4421.31.camel@scorpion.multitel.be> <48DE8EFB.3000204@bwh.harvard.edu> Message-ID: On Sat, Sep 27, 2008 at 9:52 PM, Andre Robatino wrote: > Oisin Feeley wrote: > > Yes, Diamondcard has been getting my business for the past year and a > > bit and I have no objections. Their service seems on a par with other > > comparably priced providers. > unfortunately, they don't appear to have a > cheap flat-fee option like Skype ($2.95/month, or less if you pay > quarterly or yearly) Anyway there are Donzens of SIP providers in each country . In France you can get illimited Frnace for 7 Euros/ mo . True Skype flat rate is still ahead . But when you have ten millions users , you get try this risky offer. > so if you use more than about 150 minutes/month, > Skype is cheaper. Which is too bad since I've noticed that Ekiga's > voice quality when using Diamondcard is much better (comparable to POTS > as opposed to much worse with Skype). I don't know if that's true in > general or just due to my local network conditions. I think diamond card support Speex ? can it be a reason ? -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0874763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at gizmoproject.com jabber/GoogleTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Sat Sep 27 21:12:38 2008 From: michel.memeteau at gmail.com (michel memeteau) Date: Sat, 27 Sep 2008 23:12:38 +0200 Subject: [Ekiga-list] pc-to-phone recommandations? In-Reply-To: References: <48DE0217.7090500@free.fr> <1222541938.4421.31.camel@scorpion.multitel.be> <48DE8EFB.3000204@bwh.harvard.edu> Message-ID: On Sat, Sep 27, 2008 at 11:01 PM, michel memeteau wrote: > > In France you can get illimited France for 7 Euros/ mo . True Skype flat > rate is still ahead . But when you have ten millions users , you get try > this risky offer. > Sorry I meant 7 Euro/ mo for 23 countries ( Europe , USA , china , AU , etc.. ) . Cheaper than Skype IMO. -------------- next part -------------- An HTML attachment was scrubbed... URL: From 1.41421 at gmail.com Sat Sep 27 23:00:16 2008 From: 1.41421 at gmail.com (JCA) Date: Sat, 27 Sep 2008 17:00:16 -0600 Subject: [Ekiga-list] ekiga-list Digest, Vol 26, Issue 31 In-Reply-To: References: Message-ID: > Le samedi 27 septembre 2008 ? 08:03 -0600, JCA a ?crit : >> > Le jeudi 25 septembre 2008 ? 11:27 -0600, JCA a ?crit : >> >> I have upgraded to Ekiga 3.0 and, much to my dismay, the info I >> >> had in my address book is gone. I still have the names, but not the >> >> phone numbers. Are they really gone for good, or can they be at all >> >> retrieved? >> > >> > If you right click, doesn't it give you the option to call using the >> > phone number ? >> >> No. I get a menu with four items: Edit, Remove, Refresh and New >> Contact. When selecting Edit I get another window containing boxes for >> Name, VoIP URI, Home phone, Office phone, Cell phone and Pager - but, >> with the exception of Name, the boxes are empty. The numbers I had >> under Ekiga 2.0.12 are gone :-( > > Those numbers are stored in Evolution's addressbook. If they > disappeared, there are three possibilities : > 1) you were running the non-Gnome version and now you are running the > Gnome version of Ekiga > 2) the opposite > 3) a bug in evolution-data-server I compiled both versions of Ekiga with the same arguments: ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --disable-static --enable-dbus --mandir=/usr/man --program-prefix= --program-suffix= According to config.log, Gnome is enabled in both cases. > But Ekiga still works the same regarding the phone numbers. They are > even stored in an external entity. So there is no risk of loosing them. > > The only different thing is that they are not displayed by default, you > have to right-click... Right-click where? When I do so on some entry in the Address Book I just get the four choices I mentioned early on - no phone number. Another issue: Quite often, when trying to make a PC-to-Phone call using the Diamondcard service Ekiga just freezes, apparently unable to contact the server. The only recourse left is to kill the ekiga process from the command line. Version 2.0.12 never froze on me, I never had to kill it from the command line. From edunagin at gmail.com Sat Sep 27 23:03:32 2008 From: edunagin at gmail.com (Edward Dunagin) Date: Sat, 27 Sep 2008 17:03:32 -0600 Subject: [Ekiga-list] Logitech Webcam (Not "GO") solution In-Reply-To: <48DE48F0.8050109@gmail.com> References: <48DE48F0.8050109@gmail.com> Message-ID: <2af451740809271603o52d2fc03v3fa4b5a678c85d65@mail.gmail.com> Hi Brian, Edward Dunagin-Dunigan Bozeman, MT 59718 mobile 406-570-0992 Land line 406-556-7282 EKIGA: sip:edunagin at ekiga.net http://doas.montanalinux.org On Sat, Sep 27, 2008 at 8:53 AM, Brian Fahrlander wrote: > > Back when I was a highly-paid engineer in Chicago, one of these little > Logitech Webcams got into my stable of parts- musta been 1996-97. I wasted > THREE HOURS trying to get the thing working under Windows, but grinned > brightly when I plugged it into Linux and it worked right out of the box. > > Fast forward to now: I just spent my 5th hour and final hour going over > google, trying to re-establish this kind of relationship. Everything's newer > now, and I understand that, going to 0v511-jpeg, spcxxx, and so on. But > short of getting out the source code and wasting the afternoon (why?) I > thought I'd ask if someone in this audience has one of them working. Maybe > I'll get a reply before someone empties the trashcan. :) > > I'm running a very 'clean' Ubuntu Hardy, no sourcecode or special projects > to get in the way. I'm getting the 'usb-returned -28' thing, which I'm told > is supposed to be the same as "no space left on device". > > I really don't want to break into source code; I shouldn't have to- it's > the foundational device on which all these others were built, and it once > took nothing at all. (We're regressing the way Microsoft's been doing, > lately). > > If you have one of these under Linux, didn't have to hack into the source > code, let me know, aye? I'd sure appreciate it. I have a Logitech Quickcam USB running under Hardy and Ekiga 2.0.12 and had no trouble setting it up. It too is very old. Also using v4l.. Hope this helps.............ed From wheeldweller at gmail.com Sat Sep 27 23:30:58 2008 From: wheeldweller at gmail.com (Brian Fahrlander) Date: Sat, 27 Sep 2008 18:30:58 -0500 Subject: [Ekiga-list] Logitech Webcam (Not "GO") solution In-Reply-To: <2af451740809271603o52d2fc03v3fa4b5a678c85d65@mail.gmail.com> References: <48DE48F0.8050109@gmail.com> <2af451740809271603o52d2fc03v3fa4b5a678c85d65@mail.gmail.com> Message-ID: <48DEC232.1040307@gmail.com> Edward Dunagin wrote: > > I have a Logitech Quickcam USB running under Hardy and Ekiga 2.0.12 > and had no trouble setting it up. It too is very old. Also using v4l.. > > Hope this helps.............ed > Actually there are two versions of "their webcam" between mine and yours; unfortunately yours and ones that followed are the only ones they [writers AND webcam designers] chose to move forward with. That's ok. It's already where it needed to go. I had an IRMan like this the other day; I spent $35 on it back in those days. I must have put dozens of man-hours into getting it to work on various versions of Redhat, then Fedora, then Ubuntu, but it worked for like...30 minutes in it's lifetime. Every once in a while ya need to throw things away, ya know? AND MAN, did it feel good! :) -- ------------------------------------------------------------------------ Brian Fahrl?nder Christian, Conservative, and Technomad Evansville, IN ICQ: 5119262 AOL/Yahoo/GoogleTalk: WheelDweller ------------------------------------------------------------------------ From ryan.hendrickson at alum.mit.edu Sun Sep 28 01:01:24 2008 From: ryan.hendrickson at alum.mit.edu (Ryan Hendrickson) Date: Sat, 27 Sep 2008 21:01:24 -0400 (EDT) Subject: [Ekiga-list] The man's got problems Message-ID: Hello friendly list, I've eagerly upgraded to Ekiga 3.0 and, after running the configuration druid (and re-entering all my account info by hand from the old ekiga.conf), suddenly find myself with troubles. My ekiga.net account gives a "Could not register(Timeout)" status, and while my sip.diamondcard.us account will register, making calls doesn't seem to work at all---I click the green phone button, and Ekiga just sits there until I click the red phone button. Things I've tried: lowering my firewall (although it used to work with my firewall up before), killing all other sound-making apps (although my default audio devices in ALSA are dmix and dsnoop), making sure ekiga.net isn't down (the web server isn't, at any rate), double-checking all my passwords, reading the man page, scouring the wiki, restarting Ekiga, rebooting my machine, and praying. Can anyone help? R From dsandras at seconix.com Sun Sep 28 09:43:24 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 11:43:24 +0200 Subject: [Ekiga-list] The man's got problems In-Reply-To: References: Message-ID: <1222595004.4421.55.camel@scorpion.multitel.be> Le samedi 27 septembre 2008 ? 21:01 -0400, Ryan Hendrickson a ?crit : > Hello friendly list, > > I've eagerly upgraded to Ekiga 3.0 and, after running the configuration > druid (and re-entering all my account info by hand from the old > ekiga.conf), suddenly find myself with troubles. My ekiga.net account > gives a "Could not register(Timeout)" status, and while my > sip.diamondcard.us account will register, making calls doesn't seem to > work at all---I click the green phone button, and Ekiga just sits there > until I click the red phone button. > > Things I've tried: lowering my firewall (although it used to work with my > firewall up before), killing all other sound-making apps (although my > default audio devices in ALSA are dmix and dsnoop), making sure ekiga.net > isn't down (the web server isn't, at any rate), double-checking all my > passwords, reading the man page, scouring the wiki, restarting Ekiga, > rebooting my machine, and praying. > > Can anyone help? Please enable only one account and post a -d 4 output somehwere. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sun Sep 28 09:44:28 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 11:44:28 +0200 Subject: [Ekiga-list] ekiga-list Digest, Vol 26, Issue 31 In-Reply-To: References: Message-ID: <1222595068.4421.57.camel@scorpion.multitel.be> Le samedi 27 septembre 2008 ? 17:00 -0600, JCA a ?crit : [...] > > > > The only different thing is that they are not displayed by default, you > > have to right-click... > > Right-click where? When I do so on some entry in the Address On a contact. > Book I just get the four choices I mentioned early on - no phone > number. Another issue: Quite often, when trying to make a PC-to-Phone > call using the Diamondcard service Ekiga just freezes, apparently > unable to contact the server. The only recourse left is to kill the > ekiga process from the command line. Version 2.0.12 never froze on me, > I never had to kill it from the command line. When it freezes, you need to take a backtrace and send it to us. We'll fix the problem... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From 1.41421 at gmail.com Sun Sep 28 13:33:08 2008 From: 1.41421 at gmail.com (JCA) Date: Sun, 28 Sep 2008 07:33:08 -0600 Subject: [Ekiga-list] ekiga-list Digest, Vol 26, Issue 33 In-Reply-To: References: Message-ID: > Le samedi 27 septembre 2008 ? 17:00 -0600, JCA a ?crit : > > [...] > >> > >> > The only different thing is that they are not displayed by default, you >> > have to right-click... >> >> Right-click where? When I do so on some entry in the Address > > On a contact. > >> Book I just get the four choices I mentioned early on - no phone >> number. Another issue: Quite often, when trying to make a PC-to-Phone >> call using the Diamondcard service Ekiga just freezes, apparently >> unable to contact the server. The only recourse left is to kill the >> ekiga process from the command line. Version 2.0.12 never froze on me, >> I never had to kill it from the command line. > > When it freezes, you need to take a backtrace and send it to us. We'll > fix the problem... How do I take a backtrace, if it is frozen? Do I have to kill or start it in some particular way? From fabrice at alphonso.dyndns.org Sun Sep 28 13:51:22 2008 From: fabrice at alphonso.dyndns.org (Fabrice ALPHONSO) Date: Sun, 28 Sep 2008 15:51:22 +0200 Subject: [Ekiga-list] ekiga-list Digest, Vol 26, Issue 33 In-Reply-To: References: Message-ID: <1222609882.20409.1.camel@balder.walhalla> Le dimanche 28 septembre 2008 ? 07:33 -0600, JCA a ?crit : > > Le samedi 27 septembre 2008 ? 17:00 -0600, JCA a ?crit : > > > > [...] > > > >> > > >> > The only different thing is that they are not displayed by default, you > >> > have to right-click... > >> > >> Right-click where? When I do so on some entry in the Address > > > > On a contact. > > > >> Book I just get the four choices I mentioned early on - no phone > >> number. Another issue: Quite often, when trying to make a PC-to-Phone > >> call using the Diamondcard service Ekiga just freezes, apparently > >> unable to contact the server. The only recourse left is to kill the > >> ekiga process from the command line. Version 2.0.12 never froze on me, > >> I never had to kill it from the command line. > > > > When it freezes, you need to take a backtrace and send it to us. We'll > > fix the problem... > > How do I take a backtrace, if it is frozen? Do I have to kill or > start it in some particular way? http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_send_us_a_backtrace_from_a_crash hth, fabrice -- ALPHONSO Fabrice http://alphonso.dyndns.org/blog/ http://alphonso.dyndns.org/gallery2/ sip:fabrice at ekiga.net From dsandras at seconix.com Sun Sep 28 14:26:16 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 16:26:16 +0200 Subject: [Ekiga-list] ekiga-list Digest, Vol 26, Issue 31 In-Reply-To: <1222595068.4421.57.camel@scorpion.multitel.be> References: <1222595068.4421.57.camel@scorpion.multitel.be> Message-ID: <1222611976.16250.0.camel@scorpion.multitel.be> Le dimanche 28 septembre 2008 ? 11:44 +0200, Damien Sandras a ?crit : > Le samedi 27 septembre 2008 ? 17:00 -0600, JCA a ?crit : > > [...] > > > > > > > The only different thing is that they are not displayed by default, you > > > have to right-click... > > > > Right-click where? When I do so on some entry in the Address > > On a contact. > > > Book I just get the four choices I mentioned early on - no phone > > number. Another issue: Quite often, when trying to make a PC-to-Phone > > call using the Diamondcard service Ekiga just freezes, apparently > > unable to contact the server. The only recourse left is to kill the > > ekiga process from the command line. Version 2.0.12 never froze on me, > > I never had to kill it from the command line. > > When it freezes, you need to take a backtrace and send it to us. We'll > fix the problem... Also try to isolate the problem : - disable echo cancellation (if enabled) - disable video support - do not activate video preview in the call panel - ... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ryan.hendrickson at alum.mit.edu Sun Sep 28 14:41:29 2008 From: ryan.hendrickson at alum.mit.edu (Ryan Hendrickson) Date: Sun, 28 Sep 2008 10:41:29 -0400 (EDT) Subject: [Ekiga-list] The man's got problems In-Reply-To: <1222595004.4421.55.camel@scorpion.multitel.be> References: <1222595004.4421.55.camel@scorpion.multitel.be> Message-ID: Thanks Damien, Here's the output when only the Ekiga.net account is present: http://pastebin.com/m7de52e29 And here's the output with only the DiamondCard account, with which I try to make a call to the DiamondCard echo test service at sip:441 at sip.diamondcard.us: http://pastebin.com/m633eec9a Thanks again, R At 2008-09-28 11:43+0200, Damien Sandras sent: > Le samedi 27 septembre 2008 ? 21:01 -0400, Ryan Hendrickson a ?crit : >> Hello friendly list, >> >> I've eagerly upgraded to Ekiga 3.0 and, after running the configuration >> druid (and re-entering all my account info by hand from the old >> ekiga.conf), suddenly find myself with troubles. My ekiga.net account >> gives a "Could not register(Timeout)" status, and while my >> sip.diamondcard.us account will register, making calls doesn't seem to >> work at all---I click the green phone button, and Ekiga just sits there >> until I click the red phone button. >> >> Things I've tried: lowering my firewall (although it used to work with my >> firewall up before), killing all other sound-making apps (although my >> default audio devices in ALSA are dmix and dsnoop), making sure ekiga.net >> isn't down (the web server isn't, at any rate), double-checking all my >> passwords, reading the man page, scouring the wiki, restarting Ekiga, >> rebooting my machine, and praying. >> >> Can anyone help? > > Please enable only one account and post a -d 4 output somehwere. > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From oisin.feeley at gmail.com Sun Sep 28 15:23:45 2008 From: oisin.feeley at gmail.com (Oisin Feeley) Date: Sun, 28 Sep 2008 11:23:45 -0400 Subject: [Ekiga-list] pc-to-phone recommandations? In-Reply-To: References: <48DE0217.7090500@free.fr> <1222541938.4421.31.camel@scorpion.multitel.be> <48DE8EFB.3000204@bwh.harvard.edu> Message-ID: On 9/27/08, michel memeteau wrote: > Anyway there are Donzens of SIP providers in each country . Very true. But they all charge roughly around the same and are very cheap compared to POTS long-distance accounts. The other benefit of diamoncard is that they actually give some money to help fund Ekiga development. So, unless you can find some massive price advantage it's nice to go with them. Best wishes, Oisin Feeley From dsandras at seconix.com Sun Sep 28 15:26:36 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 17:26:36 +0200 Subject: [Ekiga-list] The man's got problems In-Reply-To: References: <1222595004.4421.55.camel@scorpion.multitel.be> Message-ID: <1222615596.16250.7.camel@scorpion.multitel.be> Le dimanche 28 septembre 2008 ? 10:41 -0400, Ryan Hendrickson a ?crit : > Thanks Damien, > > Here's the output when only the Ekiga.net account is present: > > http://pastebin.com/m7de52e29 > > And here's the output with only the DiamondCard account, with which I try > to make a call to the DiamondCard echo test service at > sip:441 at sip.diamondcard.us: > > http://pastebin.com/m633eec9a The problem is this : 2008/09/28 10:22:28.272 0:04.384 StunDetector:0xb3c04b90 STUN STUN server 83.103.82.85:3478 unexpectedly went offline. In one of the logs, it detects symmetric NAT. Is there something specific to your NAT router ? Don't you get a popup telling you there is a NAT problem ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sun Sep 28 15:29:26 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 17:29:26 +0200 Subject: [Ekiga-list] The man's got problems In-Reply-To: <1222615596.16250.7.camel@scorpion.multitel.be> References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> Message-ID: <1222615766.16250.9.camel@scorpion.multitel.be> Le dimanche 28 septembre 2008 ? 17:26 +0200, Damien Sandras a ?crit : > Le dimanche 28 septembre 2008 ? 10:41 -0400, Ryan Hendrickson a ?crit : > > Thanks Damien, > > > > Here's the output when only the Ekiga.net account is present: > > > > http://pastebin.com/m7de52e29 > > > > And here's the output with only the DiamondCard account, with which I try > > to make a call to the DiamondCard echo test service at > > sip:441 at sip.diamondcard.us: > > > > http://pastebin.com/m633eec9a > > The problem is this : > 2008/09/28 10:22:28.272 0:04.384 StunDetector:0xb3c04b90 STUN > STUN server 83.103.82.85:3478 unexpectedly went offline. > > In one of the logs, it detects symmetric NAT. > > Is there something specific to your NAT router ? Don't you get a popup > telling you there is a NAT problem ? And in the diamondcard call, it seems to indicate you cleared teh call. Is that the case ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ryan.hendrickson at alum.mit.edu Sun Sep 28 15:32:37 2008 From: ryan.hendrickson at alum.mit.edu (Ryan Hendrickson) Date: Sun, 28 Sep 2008 11:32:37 -0400 (EDT) Subject: [Ekiga-list] The man's got problems In-Reply-To: <1222615596.16250.7.camel@scorpion.multitel.be> References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> Message-ID: At 2008-09-28 17:26+0200, Damien Sandras sent: > The problem is this : > 2008/09/28 10:22:28.272 0:04.384 StunDetector:0xb3c04b90 STUN > STUN server 83.103.82.85:3478 unexpectedly went offline. > > In one of the logs, it detects symmetric NAT. > > Is there something specific to your NAT router ? Don't you get a popup > telling you there is a NAT problem ? My computer is connected directly to my cable modem, and iptables -L -t nat is empty, so I'm baffled as to how Ekiga thinks I'm being NAT'd. I don't get any popups. Is it possible that there's some latent configuration hanging around from my old Ekiga 2 installation that's confusing Ekiga 3? R From ryan.hendrickson at alum.mit.edu Sun Sep 28 15:36:26 2008 From: ryan.hendrickson at alum.mit.edu (Ryan Hendrickson) Date: Sun, 28 Sep 2008 11:36:26 -0400 (EDT) Subject: [Ekiga-list] The man's got problems In-Reply-To: <1222615766.16250.9.camel@scorpion.multitel.be> References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> <1222615766.16250.9.camel@scorpion.multitel.be> Message-ID: At 2008-09-28 17:29+0200, Damien Sandras sent: > And in the diamondcard call, it seems to indicate you cleared teh call. > Is that the case ? Yeah, after a minute of waiting for some kind of response. The DiamondCard website, by the way, claims that I've successfully made a 30 second call to 441---but I don't hear anything from Ekiga, and the call panel still says "Standby". Maybe it's a sound problem, but clicking the "Play" button in the Sound Events preferences window works just fine, and I've tried setting the audio devices to both Default and the name of my hardware sound device in ALSA, with no change. R From ryan.hendrickson at alum.mit.edu Sun Sep 28 15:43:08 2008 From: ryan.hendrickson at alum.mit.edu (Ryan Hendrickson) Date: Sun, 28 Sep 2008 11:43:08 -0400 (EDT) Subject: [Ekiga-list] The man's got problems In-Reply-To: References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> Message-ID: At 2008-09-28 11:32-0400, Ryan Hendrickson sent: > At 2008-09-28 17:26+0200, Damien Sandras sent: > >> The problem is this : >> 2008/09/28 10:22:28.272 0:04.384 StunDetector:0xb3c04b90 STUN >> STUN server 83.103.82.85:3478 unexpectedly went offline. >> >> In one of the logs, it detects symmetric NAT. >> >> Is there something specific to your NAT router ? Don't you get a popup >> telling you there is a NAT problem ? > > My computer is connected directly to my cable modem, and iptables -L -t nat > is empty, so I'm baffled as to how Ekiga thinks I'm being NAT'd. I don't get > any popups. Oh, hold on. I just restarted Ekiga and now I get the enable port forwarding manually popup. I swear I haven't seen this before... Hmmm. On experimentation, this popup appears about one time in three whenever I restart. Okay. I'm still confused since, as I mentioned, I don't have a router between me and the modem. I guess it could be that the modem is also a router? (Unlikely; my IP address isn't on a subnet.) Or that my ISP is blocking SIP ports? (More likely, but then how was Ekiga working before?) Any tips on how to diagnose this? Thanks, R From dsandras at seconix.com Sun Sep 28 16:03:30 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 18:03:30 +0200 Subject: [Ekiga-list] The man's got problems In-Reply-To: References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> Message-ID: <1222617810.21040.2.camel@scorpion.multitel.be> Le dimanche 28 septembre 2008 ? 11:43 -0400, Ryan Hendrickson a ?crit : > At 2008-09-28 11:32-0400, Ryan Hendrickson sent: > > > At 2008-09-28 17:26+0200, Damien Sandras sent: > > > >> The problem is this : > >> 2008/09/28 10:22:28.272 0:04.384 StunDetector:0xb3c04b90 STUN > >> STUN server 83.103.82.85:3478 unexpectedly went offline. > >> > >> In one of the logs, it detects symmetric NAT. > >> > >> Is there something specific to your NAT router ? Don't you get a popup > >> telling you there is a NAT problem ? > > > > My computer is connected directly to my cable modem, and iptables -L -t nat > > is empty, so I'm baffled as to how Ekiga thinks I'm being NAT'd. I don't get > > any popups. > > Oh, hold on. I just restarted Ekiga and now I get the enable port > forwarding manually popup. I swear I haven't seen this before... > > Hmmm. On experimentation, this popup appears about one time in three > whenever I restart. > > Okay. I'm still confused since, as I mentioned, I don't have a router > between me and the modem. I guess it could be that the modem is also a > router? (Unlikely; my IP address isn't on a subnet.) Or that my ISP is > blocking SIP ports? (More likely, but then how was Ekiga working before?) > > Any tips on how to diagnose this? If you type ifconfig, do you see a public or a private address ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ryan.hendrickson at alum.mit.edu Sun Sep 28 16:10:35 2008 From: ryan.hendrickson at alum.mit.edu (Ryan Hendrickson) Date: Sun, 28 Sep 2008 12:10:35 -0400 (EDT) Subject: [Ekiga-list] The man's got problems In-Reply-To: <1222617810.21040.2.camel@scorpion.multitel.be> References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> <1222617810.21040.2.camel@scorpion.multitel.be> Message-ID: At 2008-09-28 18:03+0200, Damien Sandras sent: > Le dimanche 28 septembre 2008 ?? 11:43 -0400, Ryan Hendrickson a ??crit : >> At 2008-09-28 11:32-0400, Ryan Hendrickson sent: >> >>> At 2008-09-28 17:26+0200, Damien Sandras sent: >>> >>>> The problem is this : >>>> 2008/09/28 10:22:28.272 0:04.384 StunDetector:0xb3c04b90 STUN >>>> STUN server 83.103.82.85:3478 unexpectedly went offline. >>>> >>>> In one of the logs, it detects symmetric NAT. >>>> >>>> Is there something specific to your NAT router ? Don't you get a popup >>>> telling you there is a NAT problem ? >>> >>> My computer is connected directly to my cable modem, and iptables -L -t nat >>> is empty, so I'm baffled as to how Ekiga thinks I'm being NAT'd. I don't get >>> any popups. >> >> Oh, hold on. I just restarted Ekiga and now I get the enable port >> forwarding manually popup. I swear I haven't seen this before... >> >> Hmmm. On experimentation, this popup appears about one time in three >> whenever I restart. >> >> Okay. I'm still confused since, as I mentioned, I don't have a router >> between me and the modem. I guess it could be that the modem is also a >> router? (Unlikely; my IP address isn't on a subnet.) Or that my ISP is >> blocking SIP ports? (More likely, but then how was Ekiga working before?) >> >> Any tips on how to diagnose this? > > If you type ifconfig, do you see a public or a private address ? Public. It matches what external machines report my address to be. R From dsandras at seconix.com Sun Sep 28 17:50:05 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 19:50:05 +0200 Subject: [Ekiga-list] The man's got problems In-Reply-To: References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> <1222617810.21040.2.camel@scorpion.multitel.be> Message-ID: <1222624205.4456.1.camel@scorpion.multitel.be> Le dimanche 28 septembre 2008 ? 12:10 -0400, Ryan Hendrickson a ?crit : > At 2008-09-28 18:03+0200, Damien Sandras sent: > > > Le dimanche 28 septembre 2008 ? 11:43 -0400, Ryan Hendrickson a ?crit : > >> At 2008-09-28 11:32-0400, Ryan Hendrickson sent: > >> > >>> At 2008-09-28 17:26+0200, Damien Sandras sent: > >>> > >>>> The problem is this : > >>>> 2008/09/28 10:22:28.272 0:04.384 StunDetector:0xb3c04b90 STUN > >>>> STUN server 83.103.82.85:3478 unexpectedly went offline. > >>>> > >>>> In one of the logs, it detects symmetric NAT. > >>>> > >>>> Is there something specific to your NAT router ? Don't you get a popup > >>>> telling you there is a NAT problem ? > >>> > >>> My computer is connected directly to my cable modem, and iptables -L -t nat > >>> is empty, so I'm baffled as to how Ekiga thinks I'm being NAT'd. I don't get > >>> any popups. > >> > >> Oh, hold on. I just restarted Ekiga and now I get the enable port > >> forwarding manually popup. I swear I haven't seen this before... > >> > >> Hmmm. On experimentation, this popup appears about one time in three > >> whenever I restart. > >> > >> Okay. I'm still confused since, as I mentioned, I don't have a router > >> between me and the modem. I guess it could be that the modem is also a > >> router? (Unlikely; my IP address isn't on a subnet.) Or that my ISP is > >> blocking SIP ports? (More likely, but then how was Ekiga working before?) > >> > >> Any tips on how to diagnose this? > > > > If you type ifconfig, do you see a public or a private address ? > > Public. It matches what external machines report my address to be. OK, I have a workaround to make things work. gconftool-2 -s /apps/ekiga/general/nat/stun_server "" --type=string There is nevertheless a bug somewhere, I'll investigate. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sun Sep 28 17:55:42 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 19:55:42 +0200 Subject: [Ekiga-list] The man's got problems In-Reply-To: References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> <1222615766.16250.9.camel@scorpion.multitel.be> Message-ID: <1222624542.4456.8.camel@scorpion.multitel.be> Le dimanche 28 septembre 2008 ? 11:36 -0400, Ryan Hendrickson a ?crit : > At 2008-09-28 17:29+0200, Damien Sandras sent: > > > And in the diamondcard call, it seems to indicate you cleared teh call. > > Is that the case ? > > Yeah, after a minute of waiting for some kind of response. The > DiamondCard website, by the way, claims that I've successfully made a 30 > second call to 441---but I don't hear anything from Ekiga, and the call > panel still says "Standby". Maybe it's a sound problem, but clicking the > "Play" button in the Sound Events preferences window works just fine, and > I've tried setting the audio devices to both Default and the name of my > hardware sound device in ALSA, with no change. What I don't understand is that you establish the call at 10:23:00.821, and you receive a response from the proxy at 10:23:01.301 : SIP/2.0 100 Giving a try then nothing during 1 minute.... I really think your SIP packets are firewalled or something so. The "STUN server unexpectedly went offline" seems to confirm that problem. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ryan.hendrickson at alum.mit.edu Sun Sep 28 19:56:24 2008 From: ryan.hendrickson at alum.mit.edu (Ryan Hendrickson) Date: Sun, 28 Sep 2008 15:56:24 -0400 (EDT) Subject: [Ekiga-list] The man's got problems In-Reply-To: <1222624542.4456.8.camel@scorpion.multitel.be> References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> <1222615766.16250.9.camel@scorpion.multitel.be> <1222624542.4456.8.camel@scorpion.multitel.be> Message-ID: At 2008-09-28 19:55+0200, Damien Sandras sent: > What I don't understand is that you establish the call at 10:23:00.821, > and you receive a response from the proxy at 10:23:01.301 : > SIP/2.0 100 Giving a try > then nothing during 1 minute.... > > I really think your SIP packets are firewalled or something so. > > The "STUN server unexpectedly went offline" seems to confirm that > problem. Something like that! I reverted to an older kernel, and now both accounts work beautifully. Clearly not an Ekiga problem; I guess it's time to go config diffing... If anyone's curious, here's the kernel config diff: http://pastebin.com/mc70b16a The left side is for my old kernel, 2.6.23-gentoo-r9, and the right side for the new-but-broken kernel, 2.6.24-tuxonice-r9. Nothing leaps out at me as "Hey, I'm going to break your networking!", but I have had other networking-related problems (NetworkManager stalls out on me, Firefox insists that I'm in offline mode on startup) with this kernel, which have also vanished now that I've reverted. Moral of the story, I guess: don't do software upgrades concurrently with kernel upgrades. Damien, thanks for all your help; Ekiga 3 is beautiful and I'm delighted that it's working for me now. R From dsandras at seconix.com Sun Sep 28 20:33:15 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 28 Sep 2008 22:33:15 +0200 Subject: [Ekiga-list] The man's got problems In-Reply-To: References: <1222595004.4421.55.camel@scorpion.multitel.be> <1222615596.16250.7.camel@scorpion.multitel.be> <1222615766.16250.9.camel@scorpion.multitel.be> <1222624542.4456.8.camel@scorpion.multitel.be> Message-ID: <1222633995.4456.24.camel@scorpion.multitel.be> Le dimanche 28 septembre 2008 ? 15:56 -0400, Ryan Hendrickson a ?crit : > At 2008-09-28 19:55+0200, Damien Sandras sent: > > > What I don't understand is that you establish the call at 10:23:00.821, > > and you receive a response from the proxy at 10:23:01.301 : > > SIP/2.0 100 Giving a try > > then nothing during 1 minute.... > > > > I really think your SIP packets are firewalled or something so. > > > > The "STUN server unexpectedly went offline" seems to confirm that > > problem. > > Something like that! I reverted to an older kernel, and now both accounts > work beautifully. Clearly not an Ekiga problem; I guess it's time to go > config diffing... > > If anyone's curious, here's the kernel config diff: > > http://pastebin.com/mc70b16a > > The left side is for my old kernel, 2.6.23-gentoo-r9, and the right side > for the new-but-broken kernel, 2.6.24-tuxonice-r9. Nothing leaps out at > me as "Hey, I'm going to break your networking!", but I have had other > networking-related problems (NetworkManager stalls out on me, Firefox > insists that I'm in offline mode on startup) with this kernel, which have > also vanished now that I've reverted. Moral of the story, I guess: don't > do software upgrades concurrently with kernel upgrades. > > Damien, thanks for all your help; Ekiga 3 is beautiful and I'm delighted > that it's working for me now. That is extremely weird! (I'm also using that kernel). If you find the cause of this, please post to the list. I'm also happy it works :-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From luis.davila.pc at gmail.com Sun Sep 28 21:20:59 2008 From: luis.davila.pc at gmail.com (Luis Davila) Date: Sun, 28 Sep 2008 23:20:59 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <1222544332.18892.26.camel@achille> References: <1222544332.18892.26.camel@achille> Message-ID: <48DFF53B.8040705@gmail.com> hi, i installed in kubuntu hardy and the diagnostic: - i needed install V4L plugins manually for recognize creative notebook webcam - i needed run the druid configuration wizard because all sound config was marked like SILENT or NULL.. after that always was ok, so - the 500 at ekiga.net call was placed without problems, even video...BUT - with a real call between another ekiga user under windows version and me the voice was perfect but not video. The webcam is recognized but not functionally during the call - without problems to start or quit properly thanks for all your work.. luis yannick wrote: > Hello, > > I've made some packages for Ubuntu. Before uploading them on ekiga.org, > i would like to have some volunteers to test them. Do they install > properly? Run fine? Can you quit properly? Can you place a call to > sip:500 at ekiga.net ? Those kind of stuff. > > I would also know if your settings are preserved during the upgrade from > 2.0.x. (like your phone numbers...) > > Give it a try while it's hot: > https://launchpad.net/~sevmek/+archive > > Best regards, > Yannick From luis.davila.pc at gmail.com Sun Sep 28 21:32:10 2008 From: luis.davila.pc at gmail.com (Luis Davila) Date: Sun, 28 Sep 2008 23:32:10 +0200 Subject: [Ekiga-list] pc-to-phone recommandations? In-Reply-To: <48DE0217.7090500@free.fr> References: <48DE0217.7090500@free.fr> Message-ID: <48DFF7DA.3090405@gmail.com> hi, personally i use diamondcard, and is really cheap for my main destination, Guatemala, only 0.10$/min, while, for example, skype is 0.16$/min, and the quality voice with Ekiga/Diamond is better than skype, at least in my case. good choice... luis jdh13 wrote: > hello all, > i'm using ekiga on my laptop (opensolaris) and i want to buy units to do > cals to people not having a computer. Does anybody have recommandations? > or user's experience? I'm wondering if this service is well suited (i > know skype's users having some troubles) > > Thanks in advance, > > gerard > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From andre at bwh.harvard.edu Sun Sep 28 23:07:33 2008 From: andre at bwh.harvard.edu (Andre Robatino) Date: Sun, 28 Sep 2008 19:07:33 -0400 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <48DFF53B.8040705@gmail.com> References: <1222544332.18892.26.camel@achille> <48DFF53B.8040705@gmail.com> Message-ID: <48E00E35.6090102@bwh.harvard.edu> Luis Davila wrote: > hi, i installed in kubuntu hardy and the diagnostic: > - i needed install V4L plugins manually for recognize creative notebook > webcam > - i needed run the druid configuration wizard because all sound config > was marked like SILENT or NULL.. after that always was ok, so > - the 500 at ekiga.net call was placed without problems, even video...BUT > > - with a real call between another ekiga user under windows version > and me the voice was perfect but not video. The webcam is recognized > but not functionally during the call I and my father have a similar problem with video with the Ekiga 2.0.12 in Fedora 9. We both have the same model UVC webcam. For each of us, the 500 at ekiga.net call usually works normally with both audio and video. But with rare exceptions, video does not work in either direction if either of us calls the other, though audio is fine. My suspicion has been that it's a kernel bug since I've seen some flaky behavior associated with various applications accessing the webcam. The uvcvideo driver was only recently included in the kernel. Which driver does your webcam use and is it considered stable? -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3266 bytes Desc: S/MIME Cryptographic Signature URL: From kas at fi.muni.cz Mon Sep 29 08:07:26 2008 From: kas at fi.muni.cz (Jan Kasprzak) Date: Mon, 29 Sep 2008 10:07:26 +0200 Subject: [Ekiga-list] Ekiga 3.0 questions/problems Message-ID: <20080929080726.GJ6243@fi.muni.cz> Hello, I have just compiled ekiga 3.0 on my Fedora 9/x86_64, and I have some questions and problems: * When starting up, ekiga displays two error pop-up windows - one says "Invalid array index", and the other one says "Operating System error". Also two "FIXME" strings are printed on STDERR. * The contacts from the Address Book apparently retained only the name, but not the phone number or the SIP URL, when migrating from 2.0 to 3.0. When I try to add the SIP URL to an existing (incorrectly imported) contact, I then get the same two error pop-ups as above, and another two new pop-ups with the same error messages are created every two or so seconds. * How to get my contacts from the address book (the window available by selecting Chat -> Address Book menu item) displayed in the "Contacts" roster in the main window? (This may be related to the problem above - my contacts apparently lost their SIP URL when migrating to 3.0). * I would like to have a "side-by-side" video view restored. as this is the only mode which can display full view of the remote camera, while still having a feedback from the local one. * When I open the address book and then close it using the window manager "x" (delete) button, a subsequent attempt to open it again from menu (Chat -> Address book) fails with the following printed to STDERR: (ekiga:983): GLib-GObject-WARNING **: invalid unclassed pointer in cast to `GtkWidget' (ekiga:983): Gtk-CRITICAL **: gtk_widget_show_all: assertion `GTK_IS_WIDGET (widget)' failed * When making an outgoing call (e.g. to 500 at ekiga.net), ekiga (or PA) says *** PULSEAUDIO: Unable to create stream. Cannot set parameters Input/output error but then the call works without a problem. I have all three audio devices in Edit->Preferences->Audio->Devices set to "Default (PTLIB/ALSA)". Now some usability problems: * I don't think "Chat" is the right name for the leftmost menu item, especially when there is no way to start the _chat_ from there without selecting the contact from the roster first (and even then, the "start chat" action is named "Message" instead of "Chat", and is hidden in the "Contact" submenu. * IMHO, from the UI point of view, the chat should be treated the same way as a call. In 3.0, there is a separate Chat->Call menu item, but no Chat->Message or whatever. * The Chat->Call option (and the green phone icon in the main window) is still available even when there is no valid SIP (or other) URL entered in the URL input box. Selecting it (or clicking the green icon) provides no audible feedback, and almost no visual feedback (apart from the status line message "User is not available"). I think the "User busy" ringtone should be played, and maybe a error pop-up should be displayed, with a more meaningful message (such as "`sip:' is not a valid URL"). Or the green button should be disabled altogether, until a valid URL is entered. * I have not found a way how to send a message to the SIP URL in the URL input box (e.g. when this URL is not in the Address Book as well). * The URL input box no longer has a history drop-down button (I used almost exclusively this one for making calls, because I mostly call only two or three SIP contacts). Can it be restored? The "Call history" tab is not sufficient, because it also displays incoming and missed calls, and does not display the presence status - I would like to keep a "Contacts" tab opened by default instead of "Call history". * Shouldn't the "display the address book" action be under the View menu instead of "Chat" menu? After all, I want to _view_ the address book, not _chat_ it :-) * (I have written this one before:) I think it would be less confusing if the local video was displayed vertically flipped (like as the user is looking at himself into the mirror) - this way it would be easier to "stay in the center of the frame". Anyway, thanks for developing ekiga - let me know what do you think about the above problems - I am willing to fill them to the bugzilla, just tell me which of them do you consider valid. Thanks, -Yenya -- | Jan "Yenya" Kasprzak | | GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E | | http://www.fi.muni.cz/~kas/ Journal: http://www.fi.muni.cz/~kas/blog/ | >> If you find yourself arguing with Alan Cox, you?re _probably_ wrong. << >> --James Morris in "How and Why You Should Become a Kernel Hacker" << From jan.schampera at web.de Mon Sep 29 14:49:05 2008 From: jan.schampera at web.de (Jan Schampera) Date: Mon, 29 Sep 2008 16:49:05 +0200 Subject: [Ekiga-list] Ekiga 3.0 questions/problems In-Reply-To: <20080929080726.GJ6243@fi.muni.cz> References: <20080929080726.GJ6243@fi.muni.cz> Message-ID: <48E0EAE1.3010004@web.de> Jan Kasprzak wrote: > Hello, > > I have just compiled ekiga 3.0 on my Fedora 9/x86_64, and I have some > questions and problems: Hello Jan, let me comment some of those. > * When starting up, ekiga displays two error pop-up windows - one says > "Invalid array index", and the other one says "Operating System > error". Also two "FIXME" strings are printed on STDERR. > * The contacts from the Address Book apparently retained only the name, > but not the phone number or the SIP URL, when migrating > from 2.0 to 3.0. When I try to add the SIP URL to an existing > (incorrectly imported) contact, I then get the same two error pop-ups > as above, and another two new pop-ups with the same error messages > are created every two or so seconds. These 2 *might* be a migration problem 2 -> 3. We will see if it's reproducable. > * How to get my contacts from the address book (the window available > by selecting Chat -> Address Book menu item) displayed in the > "Contacts" roster in the main window? (This may be related to the > problem above - my contacts apparently lost their SIP URL > when migrating to 3.0). In contect menu, there should be an "Add to local roster" (or translated) menupoint. > * When I open the address book and then close it using the window manager > "x" (delete) button, a subsequent attempt to open it again > from menu (Chat -> Address book) fails with the following printed > to STDERR: > > (ekiga:983): GLib-GObject-WARNING **: invalid unclassed pointer in cast to `GtkWidget' > > (ekiga:983): Gtk-CRITICAL **: gtk_widget_show_all: assertion `GTK_IS_WIDGET (widget)' failed Fixed for upcoming 3.0.1. > * When making an outgoing call (e.g. to 500 at ekiga.net), ekiga (or PA) says > > *** PULSEAUDIO: Unable to create stream. > Cannot set parameters Input/output error > > but then the call works without a problem. I have all three > audio devices in Edit->Preferences->Audio->Devices set to > "Default (PTLIB/ALSA)". Does your ALSA reside above a PulseAudio system? I think it's PA. > * IMHO, from the UI point of view, the chat should be treated the same way > as a call. In 3.0, there is a separate Chat->Call menu item, > but no Chat->Message or whatever. Agreed. > * The Chat->Call option (and the green phone icon in the main window) > is still available even when there is no valid SIP (or other) > URL entered in the URL input box. Selecting it (or clicking the > green icon) provides no audible feedback, and almost no visual > feedback (apart from the status line message "User is not available"). > I think the "User busy" ringtone should be played, and maybe a > error pop-up should be displayed, with a more meaningful message > (such as "`sip:' is not a valid URL"). Or the green button should > be disabled altogether, until a valid URL is entered. Agreed. > * I have not found a way how to send a message to the SIP URL in the > URL input box (e.g. when this URL is not in the Address Book as well). Right. We will find a way. > * The URL input box no longer has a history drop-down button > (I used almost exclusively this one for making calls, because > I mostly call only two or three SIP contacts). Can it be restored? > The "Call history" tab is not sufficient, because it also > displays incoming and missed calls, and does not display the > presence status - I would like to keep a "Contacts" tab opened > by default instead of "Call history". A method would be to use the values from the "Call history", just filtered (doubles). Would that be enough? > * Shouldn't the "display the address book" action be under the View > menu instead of "Chat" menu? After all, I want to _view_ the > address book, not _chat_ it :-) Agreed. > * (I have written this one before:) I think it would be less confusing > if the local video was displayed vertically flipped (like as > the user is looking at himself into the mirror) - this way it > would be easier to "stay in the center of the frame". I don't know how far this is possible with the different output plugs, but I know who to ask ;-) Most of this stuff won't make it into the next (meant as bugfix release) version, since the GNOME branch is in freeze. Don't ask to fill the bugzilla, fill it ;-) The worst thing that can happen is, that somebody thinks it's not a bug/valid request and closes it (but most of this sounds valid to me!). Regards, Jan Schampera -- This is my life - this is my net! - Jan From martin.kurtz at gmx.net Mon Sep 29 16:26:08 2008 From: martin.kurtz at gmx.net (Martin Kurtz) Date: Mon, 29 Sep 2008 18:26:08 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <1222544332.18892.26.camel@achille> References: <1222544332.18892.26.camel@achille> Message-ID: <1222705568.8348.15.camel@martin-desktop> Hello, thx for the packages. But on my maschine I got unmet dependencies. I used "deb http://ppa.launchpad.net/sevmek/ubuntu intrepid main", but on synaptics it says: Ekiga depends on libopal, but it won't be installed - depends on libpt, but it won't be installed (Translated it from German, so it might be different...) I tried to install libopal, same problems. libpt, too. I activated all package-sources, updated, no success. Well, I am not sure if that could happen to other ubuntu users, just wanted to report. On Sa, 2008-09-27 at 21:38 +0200, yannick wrote: > Hello, > > I've made some packages for Ubuntu. Before uploading them on ekiga.org, > i would like to have some volunteers to test them. Do they install > properly? Run fine? Can you quit properly? Can you place a call to > sip:500 at ekiga.net ? Those kind of stuff. > > I would also know if your settings are preserved during the upgrade from > 2.0.x. (like your phone numbers...) > > Give it a try while it's hot: > https://launchpad.net/~sevmek/+archive > > Best regards, > Yannick > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From sevmek at free.fr Mon Sep 29 16:48:08 2008 From: sevmek at free.fr (yannick) Date: Mon, 29 Sep 2008 18:48:08 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <1222705568.8348.15.camel@martin-desktop> References: <1222544332.18892.26.camel@achille> <1222705568.8348.15.camel@martin-desktop> Message-ID: <1222706888.18892.57.camel@achille> Le lundi 29 septembre 2008 ? 18:26 +0200, Martin Kurtz a ?crit : > Hello, > > thx for the packages. But on my maschine I got unmet dependencies. > I used "deb http://ppa.launchpad.net/sevmek/ubuntu intrepid main", but > on synaptics it says: > As the ubuntu team seems to not have a lot of ressources, I'm currently working on intrepid, thus it might break. My goal it to have a simple aptitude safe-upgrade which will install 3.0 if you added the repository. When i found out something nice, i'll backport for hardy and gutsy... I hope to get something this evening. Thank you for trying. > Ekiga depends on libopal, but it won't be installed > - depends on libpt, but it won't be installed > > (Translated it from German, so it might be different...) > > I tried to install libopal, same problems. libpt, too. > > I activated all package-sources, updated, no success. > > Well, I am not sure if that could happen to other ubuntu users, just > wanted to report. > > > > > On Sa, 2008-09-27 at 21:38 +0200, yannick wrote: > > Hello, > > > > I've made some packages for Ubuntu. Before uploading them on ekiga.org, > > i would like to have some volunteers to test them. Do they install > > properly? Run fine? Can you quit properly? Can you place a call to > > sip:500 at ekiga.net ? Those kind of stuff. > > > > I would also know if your settings are preserved during the upgrade from > > 2.0.x. (like your phone numbers...) > > > > Give it a try while it's hot: > > https://launchpad.net/~sevmek/+archive > > > > Best regards, > > Yannick > > -- > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > sip:yannick at ekiga.net > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dsandras at seconix.com Mon Sep 29 17:50:30 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 29 Sep 2008 19:50:30 +0200 Subject: [Ekiga-list] Ekiga 3.0 questions/problems In-Reply-To: <48E0EAE1.3010004@web.de> References: <20080929080726.GJ6243@fi.muni.cz> <48E0EAE1.3010004@web.de> Message-ID: <1222710630.4573.4.camel@scorpion.multitel.be> Hi, Le lundi 29 septembre 2008 ? 16:49 +0200, Jan Schampera a ?crit : > Jan Kasprzak wrote: > > Hello, > > > > I have just compiled ekiga 3.0 on my Fedora 9/x86_64, and I have some > > questions and problems: > > let me comment some of those. let me comment the rest :-) > > * When starting up, ekiga displays two error pop-up windows - one says > > "Invalid array index", and the other one says "Operating System > > error". Also two "FIXME" strings are printed on STDERR. I need a backtrace. > > * The contacts from the Address Book apparently retained only the name, > > but not the phone number or the SIP URL, when migrating > > from 2.0 to 3.0. When I try to add the SIP URL to an existing > > (incorrectly imported) contact, I then get the same two error pop-ups > > as above, and another two new pop-ups with the same error messages > > are created every two or so seconds. > > These 2 *might* be a migration problem 2 -> 3. We will see if it's > reproducable. As we are using Evolution-Data-Server to store the contact information, there is no reason why this information would be lost, except if you compiled without GNOME support, ie without Evolution-Data-Server support. Is this the case ? > > > * How to get my contacts from the address book (the window available > > by selecting Chat -> Address Book menu item) displayed in the > > "Contacts" roster in the main window? (This may be related to the > > problem above - my contacts apparently lost their SIP URL > > when migrating to 3.0). > > In contect menu, there should be an "Add to local roster" (or > translated) menupoint. The address book window has an "Action" menu too. [...] > > * When making an outgoing call (e.g. to 500 at ekiga.net), ekiga (or PA) says > > > > *** PULSEAUDIO: Unable to create stream. > > Cannot set parameters Input/output error > > > > but then the call works without a problem. I have all three > > audio devices in Edit->Preferences->Audio->Devices set to > > "Default (PTLIB/ALSA)". > > Does your ALSA reside above a PulseAudio system? I think it's PA. Yes, it is not on our side. > > * IMHO, from the UI point of view, the chat should be treated the same way > > as a call. In 3.0, there is a separate Chat->Call menu item, > > but no Chat->Message or whatever. > > Agreed. Just report a bug. > > * The Chat->Call option (and the green phone icon in the main window) > > is still available even when there is no valid SIP (or other) > > URL entered in the URL input box. Selecting it (or clicking the > > green icon) provides no audible feedback, and almost no visual > > feedback (apart from the status line message "User is not available"). > > I think the "User busy" ringtone should be played, and maybe a > > error pop-up should be displayed, with a more meaningful message > > (such as "`sip:' is not a valid URL"). Or the green button should > > be disabled altogether, until a valid URL is entered. > > Agreed. Just report a bug. > > * I have not found a way how to send a message to the SIP URL in the > > URL input box (e.g. when this URL is not in the Address Book as well). > > Right. We will find a way. You can report a bug (for 3.20). > > * The URL input box no longer has a history drop-down button > > (I used almost exclusively this one for making calls, because > > I mostly call only two or three SIP contacts). Can it be restored? > > The "Call history" tab is not sufficient, because it also > > displays incoming and missed calls, and does not display the > > presence status - I would like to keep a "Contacts" tab opened > > by default instead of "Call history". > > A method would be to use the values from the "Call history", just > filtered (doubles). Would that be enough? You can report a bug (for 3.20). > > * Shouldn't the "display the address book" action be under the View > > menu instead of "Chat" menu? After all, I want to _view_ the > > address book, not _chat_ it :-) > > Agreed. Same remark, bug report. > > * (I have written this one before:) I think it would be less confusing > > if the local video was displayed vertically flipped (like as > > the user is looking at himself into the mirror) - this way it > > would be easier to "stay in the center of the frame". > > I don't know how far this is possible with the different output plugs, > but I know who to ask ;-) Not sure here, it would lead to a super wide Ekiga window. > Most of this stuff won't make it into the next (meant as bugfix release) > version, since the GNOME branch is in freeze. > > Don't ask to fill the bugzilla, fill it ;-) The worst thing that can > happen is, that somebody thinks it's not a bug/valid request and closes > it (but most of this sounds valid to me!). > I agree with Jan here. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ml at stdout.at Mon Sep 29 18:58:18 2008 From: ml at stdout.at (Hannes Ebner) Date: Mon, 29 Sep 2008 20:58:18 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <1222541900.4421.29.camel@scorpion.multitel.be> References: <1222541900.4421.29.camel@scorpion.multitel.be> Message-ID: <48E1254A.8060308@stdout.at> Damien Sandras wrote: >>> Le jeudi 25 septembre 2008 ? 11:27 -0600, JCA a ?crit : >>>> I have upgraded to Ekiga 3.0 and, much to my dismay, the info I >>>> had in my address book is gone. I still have the names, but not the >>>> phone numbers. Are they really gone for good, or can they be at all >>>> retrieved? I am experiencing the same problem here. > Those numbers are stored in Evolution's addressbook. If they > disappeared, there are three possibilities : > 1) you were running the non-Gnome version and now you are running the > Gnome version of Ekiga I was running snapshot versions (months ago; on Ubuntu 7.10 and 8.04) before I installed Ekiga 3.0 (again, a snapshot, but it should basically be the 3.0 code), to which I upgraded from the standard Ubuntu packages. Is it possible that some of the snapshots in between have been compiled without Gnome support? What does Gnome support mean, is it the support for Gnome sessions and the Evolution address book, or is there anything else? Best regards, Hannes From kas at fi.muni.cz Mon Sep 29 19:22:16 2008 From: kas at fi.muni.cz (Jan Kasprzak) Date: Mon, 29 Sep 2008 21:22:16 +0200 Subject: [Ekiga-list] Ekiga 3.0 questions/problems In-Reply-To: <1222710630.4573.4.camel@scorpion.multitel.be> References: <20080929080726.GJ6243@fi.muni.cz> <48E0EAE1.3010004@web.de> <1222710630.4573.4.camel@scorpion.multitel.be> Message-ID: <20080929192216.GI22566@fi.muni.cz> Damien Sandras wrote: : > > * When starting up, ekiga displays two error pop-up windows - one says : > > "Invalid array index", and the other one says "Operating System : > > error". Also two "FIXME" strings are printed on STDERR. : : I need a backtrace. Where should I set the breakpoint for backtrace? (I asume that by backtrace you mean "thread apply all backtrace" gdb command). : > > * The contacts from the Address Book apparently retained only the name, : > > but not the phone number or the SIP URL, when migrating : > > from 2.0 to 3.0. When I try to add the SIP URL to an existing : > > (incorrectly imported) contact, I then get the same two error pop-ups : > > as above, and another two new pop-ups with the same error messages : > > are created every two or so seconds. : > : > These 2 *might* be a migration problem 2 -> 3. We will see if it's : > reproducable. : : As we are using Evolution-Data-Server to store the contact information, : there is no reason why this information would be lost, except if you : compiled without GNOME support, ie without Evolution-Data-Server : support. Is this the case ? How can I find out? I have just grabbed the 2.90 Fedora rawhide RPMs (and newest pwlib and opal) and rebuilt it with minimal changes with 3.0.0 and corresponding pwlib and opal. In the build directory I have the ekiga-3.0.0/config.h file which contains the line #define HAVE_GNOME 1 BTW, I think there would have been no entries in the Addressbook if ekiga was compiled without the evolution-data-server support (as opposed to all expected entries without any other data than entry names). : > > * (I have written this one before:) I think it would be less confusing : > > if the local video was displayed vertically flipped (like as ^^^^^^^^^^ er, I mean horizontally, i.e. mirrored. : > > the user is looking at himself into the mirror) - this way it : > > would be easier to "stay in the center of the frame". : > : > I don't know how far this is possible with the different output plugs, : > but I know who to ask ;-) : : Not sure here, it would lead to a super wide Ekiga window. Well, screens these times are super wide as well :-) And besides, nobody is _forced_ to use the side-by-side view, just keep the option from 2.0 for the people who are used to it. : > Don't ask to fill the bugzilla, fill it ;-) The worst thing that can : > happen is, that somebody thinks it's not a bug/valid request and closes : > it (but most of this sounds valid to me!). : : I agree with Jan here. OK, I will fill the bug reports probably tomorrow. Thanks both of you for your comments! -Yenya : -- : _ Damien Sandras : (o- : //\ Ekiga Softphone : http://www.ekiga.org/ : v_/_ NOVACOM : http://www.novacom.be/ : FOSDEM : http://www.fosdem.org/ : SIP Phone : sip:dsandras at ekiga.net : : : _______________________________________________ : ekiga-list mailing list : ekiga-list at gnome.org : http://mail.gnome.org/mailman/listinfo/ekiga-list -- | Jan "Yenya" Kasprzak | | GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E | | http://www.fi.muni.cz/~kas/ Journal: http://www.fi.muni.cz/~kas/blog/ | >> If you find yourself arguing with Alan Cox, you?re _probably_ wrong. << >> --James Morris in "How and Why You Should Become a Kernel Hacker" << From dsandras at seconix.com Mon Sep 29 19:59:48 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 29 Sep 2008 21:59:48 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <48E1254A.8060308@stdout.at> References: <1222541900.4421.29.camel@scorpion.multitel.be> <48E1254A.8060308@stdout.at> Message-ID: <1222718388.5188.2.camel@scorpion.multitel.be> Le lundi 29 septembre 2008 ? 20:58 +0200, Hannes Ebner a ?crit : [...] > > Those numbers are stored in Evolution's addressbook. If they > > disappeared, there are three possibilities : > > 1) you were running the non-Gnome version and now you are running the > > Gnome version of Ekiga > > I was running snapshot versions (months ago; on Ubuntu 7.10 and 8.04) > before I installed Ekiga 3.0 (again, a snapshot, but it should basically > be the 3.0 code), to which I upgraded from the standard Ubuntu packages. > > Is it possible that some of the snapshots in between have been compiled > without Gnome support? What does Gnome support mean, is it the support > for Gnome sessions and the Evolution address book, or is there anything > else? It is support for the Evolution Address book. We are using the same fields, provided by evolution. Are your contacts available in Evolution ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon Sep 29 20:02:26 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 29 Sep 2008 22:02:26 +0200 Subject: [Ekiga-list] Ekiga 3.0 questions/problems In-Reply-To: <20080929192216.GI22566@fi.muni.cz> References: <20080929080726.GJ6243@fi.muni.cz> <48E0EAE1.3010004@web.de> <1222710630.4573.4.camel@scorpion.multitel.be> <20080929192216.GI22566@fi.muni.cz> Message-ID: <1222718546.5188.6.camel@scorpion.multitel.be> Le lundi 29 septembre 2008 ? 21:22 +0200, Jan Kasprzak a ?crit : > Damien Sandras wrote: > : > > * When starting up, ekiga displays two error pop-up windows - one says > : > > "Invalid array index", and the other one says "Operating System > : > > error". Also two "FIXME" strings are printed on STDERR. > : > : I need a backtrace. > > Where should I set the breakpoint for backtrace? > (I asume that by backtrace you mean "thread apply all backtrace" > gdb command). like 108 of src/gui/misc.cpp > > : > > * The contacts from the Address Book apparently retained only the name, > : > > but not the phone number or the SIP URL, when migrating > : > > from 2.0 to 3.0. When I try to add the SIP URL to an existing > : > > (incorrectly imported) contact, I then get the same two error pop-ups > : > > as above, and another two new pop-ups with the same error messages > : > > are created every two or so seconds. > : > > : > These 2 *might* be a migration problem 2 -> 3. We will see if it's > : > reproducable. > : > : As we are using Evolution-Data-Server to store the contact information, > : there is no reason why this information would be lost, except if you > : compiled without GNOME support, ie without Evolution-Data-Server > : support. Is this the case ? > > How can I find out? I have just grabbed the 2.90 Fedora rawhide > RPMs (and newest pwlib and opal) and rebuilt it with minimal changes > with 3.0.0 and corresponding pwlib and opal. In the build directory > I have the ekiga-3.0.0/config.h file which contains the line > > #define HAVE_GNOME 1 > > BTW, I think there would have been no entries in the Addressbook if ekiga > was compiled without the evolution-data-server support (as opposed > to all expected entries without any other data than entry names). Exact, but if you edit the contact, is the phone number displayed ? Notice also 2.00 did not support phone numbers iirc, only the "VoIP URI" or did it ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sevmek at free.fr Mon Sep 29 20:41:08 2008 From: sevmek at free.fr (yannick) Date: Mon, 29 Sep 2008 22:41:08 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <1222705568.8348.15.camel@martin-desktop> References: <1222544332.18892.26.camel@achille> <1222705568.8348.15.camel@martin-desktop> Message-ID: <1222720868.18892.59.camel@achille> Le lundi 29 septembre 2008 ? 18:26 +0200, Martin Kurtz a ?crit : > Ekiga depends on libopal, but it won't be installed > - depends on libpt, but it won't be installed > Can you retry now ? From ml at stdout.at Mon Sep 29 21:08:20 2008 From: ml at stdout.at (Hannes Ebner) Date: Mon, 29 Sep 2008 23:08:20 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <1222718388.5188.2.camel@scorpion.multitel.be> References: <1222541900.4421.29.camel@scorpion.multitel.be> <48E1254A.8060308@stdout.at> <1222718388.5188.2.camel@scorpion.multitel.be> Message-ID: <48E143C4.3010500@stdout.at> Damien Sandras wrote: > Are your contacts available in Evolution ? Yes, the numbers are visible as "Video Chat" under each contact. /Hannes From dsandras at seconix.com Mon Sep 29 21:14:58 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 29 Sep 2008 23:14:58 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <48E143C4.3010500@stdout.at> References: <1222541900.4421.29.camel@scorpion.multitel.be> <48E1254A.8060308@stdout.at> <1222718388.5188.2.camel@scorpion.multitel.be> <48E143C4.3010500@stdout.at> Message-ID: <1222722898.5188.14.camel@scorpion.multitel.be> Le lundi 29 septembre 2008 ? 23:08 +0200, Hannes Ebner a ?crit : > Damien Sandras wrote: > > Are your contacts available in Evolution ? > > Yes, the numbers are visible as "Video Chat" under each contact. So they are visible as VideoChat, but not in Ekiga itself ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ml at stdout.at Mon Sep 29 21:34:21 2008 From: ml at stdout.at (Hannes Ebner) Date: Mon, 29 Sep 2008 23:34:21 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <1222722898.5188.14.camel@scorpion.multitel.be> References: <1222541900.4421.29.camel@scorpion.multitel.be> <48E1254A.8060308@stdout.at> <1222718388.5188.2.camel@scorpion.multitel.be> <48E143C4.3010500@stdout.at> <1222722898.5188.14.camel@scorpion.multitel.be> Message-ID: <48E149DD.8010500@stdout.at> Damien Sandras wrote: > So they are visible as VideoChat, but not in Ekiga itself ? Exactly. I see the names of the contacts, but everything else is empty. I never edited them in Evolution, I always created and managed them via Ekiga's address book. The field holding the numbers is called "Video Conf" in the contacts overview and "Video Chat" in the detailed view (inside Evolution). My package source is http://snapshots.ekiga.net/snapshots/ubuntu/. /Hannes From jan.schampera at web.de Tue Sep 30 05:19:03 2008 From: jan.schampera at web.de (Jan Schampera) Date: Tue, 30 Sep 2008 07:19:03 +0200 Subject: [Ekiga-list] Ekiga 3.0 questions/problems In-Reply-To: <1222710630.4573.4.camel@scorpion.multitel.be> References: <20080929080726.GJ6243@fi.muni.cz> <48E0EAE1.3010004@web.de> <1222710630.4573.4.camel@scorpion.multitel.be> Message-ID: <48E1B6C7.4060402@web.de> Damien Sandras wrote: >>> * (I have written this one before:) I think it would be less confusing >>> if the local video was displayed vertically flipped (like as >>> the user is looking at himself into the mirror) - this way it >>> would be easier to "stay in the center of the frame". >> I don't know how far this is possible with the different output plugs, >> but I know who to ask ;-) > > Not sure here, it would lead to a super wide Ekiga window. I think he just means flipping the local video view. Nothing about adding another image to show, just show what we currently show, only flipped. J. -- This is my life - this is my net! - Jan From jpuydt at free.fr Tue Sep 30 05:51:48 2008 From: jpuydt at free.fr (Julien Puydt) Date: Tue, 30 Sep 2008 07:51:48 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <48E149DD.8010500@stdout.at> References: <1222541900.4421.29.camel@scorpion.multitel.be> <48E1254A.8060308@stdout.at> <1222718388.5188.2.camel@scorpion.multitel.be> <48E143C4.3010500@stdout.at> <1222722898.5188.14.camel@scorpion.multitel.be> <48E149DD.8010500@stdout.at> Message-ID: <48E1BE74.60304@free.fr> Hannes Ebner a ?crit : > Damien Sandras wrote: >> So they are visible as VideoChat, but not in Ekiga itself ? > > Exactly. I see the names of the contacts, but everything else is empty. > I never edited them in Evolution, I always created and managed them via > Ekiga's address book. > > The field holding the numbers is called "Video Conf" in the contacts > overview and "Video Chat" in the detailed view (inside Evolution). I'll try to dig it : it's definitely not normal that you see those uris in evolution and not in ekiga :-( Snark on #ekiga From mmassonnet at gmail.com Tue Sep 30 06:56:23 2008 From: mmassonnet at gmail.com (Mike Massonnet) Date: Tue, 30 Sep 2008 08:56:23 +0200 Subject: [Ekiga-list] Bug with video mode "in-picture" Message-ID: Hi, I experience a bug with the video mode "in-picture" with two graphic chipsets (perhaps graphic drivers) that are Intel 855 and Via UniChrome (VT82xxx) (both drivers from X.org, intel and via). The bug: the video is flipping like crazy, and if the app isn't kill quickly the whole box can freeze. I checked the debug output level 1 for GMVideoOut, but it is not interesting. Are you aware of such an issue? Can I provide debug information? Cheers Mike From martin.kurtz at gmx.net Tue Sep 30 08:53:30 2008 From: martin.kurtz at gmx.net (Martin Kurtz) Date: Tue, 30 Sep 2008 10:53:30 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <1222720868.18892.59.camel@achille> References: <1222544332.18892.26.camel@achille> <1222705568.8348.15.camel@martin-desktop> <1222720868.18892.59.camel@achille> Message-ID: <1222764810.7565.6.camel@martin-desktop> Hello again, i just retried, the installation works without complains. (ok, he had to remove ubuntu-desktop meta-package...) In the options menus i can find all audio and video devices. But, I cannot place any calls. In accounts, it tells connected. Sometimes it complained about network errors, i should manually edit the forwarding options. Well, i am using university-net, we have a local network, which provides the voip-services. To connect to the world, we use a ppp vpn connection. I made to debug stage 4 ekiga runs. First one with the vpn connection off, second on. Where can I send them to? The mailinglist complained about the mail's size. From dsandras at seconix.com Tue Sep 30 09:31:39 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 30 Sep 2008 11:31:39 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <1222764810.7565.6.camel@martin-desktop> References: <1222544332.18892.26.camel@achille> <1222705568.8348.15.camel@martin-desktop> <1222720868.18892.59.camel@achille> <1222764810.7565.6.camel@martin-desktop> Message-ID: <1222767099.12501.33.camel@scorpion.multitel.be> Le mardi 30 septembre 2008 ? 10:53 +0200, Martin Kurtz a ?crit : > Hello again, > > i just retried, the installation works without complains. (ok, he had to > remove ubuntu-desktop meta-package...) > > In the options menus i can find all audio and video devices. > > But, I cannot place any calls. > > In accounts, it tells connected. > Sometimes it complained about network errors, i should manually edit the > forwarding options. > > Well, i am using university-net, we have a local network, which provides > the voip-services. To connect to the world, we use a ppp vpn connection. > > I made to debug stage 4 ekiga runs. First one with the vpn connection > off, second on. Where can I send them to? The mailinglist complained about the mail's size. Pastebin is a good solution. Make sure to describe your problem clearly. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Tue Sep 30 09:38:52 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 30 Sep 2008 11:38:52 +0200 Subject: [Ekiga-list] [Fwd: AW: [Fwd: Bug with video mode "in-picture"]] Message-ID: <1222767532.12501.35.camel@scorpion.multitel.be> -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net -------------- next part -------------- An embedded message was scrubbed... From: Matthias Schneider Subject: AW: [Fwd: [Ekiga-list] Bug with video mode "in-picture"] Date: Tue, 30 Sep 2008 09:36:13 +0000 (GMT) Size: 2273 URL: From martin.kurtz at gmx.net Tue Sep 30 09:56:46 2008 From: martin.kurtz at gmx.net (Martin Kurtz) Date: Tue, 30 Sep 2008 11:56:46 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <1222764810.7565.6.camel@martin-desktop> References: <1222544332.18892.26.camel@achille> <1222705568.8348.15.camel@martin-desktop> <1222720868.18892.59.camel@achille> <1222764810.7565.6.camel@martin-desktop> Message-ID: <1222768606.7565.7.camel@martin-desktop> ok, I posted them here: http://pastebin.com/m811c5d6 http://pastebin.com/m22796a8b On Di, 2008-09-30 at 10:53 +0200, Martin Kurtz wrote: > Hello again, > > i just retried, the installation works without complains. (ok, he had to > remove ubuntu-desktop meta-package...) > > In the options menus i can find all audio and video devices. > > But, I cannot place any calls. > > In accounts, it tells connected. > Sometimes it complained about network errors, i should manually edit the > forwarding options. > > Well, i am using university-net, we have a local network, which provides > the voip-services. To connect to the world, we use a ppp vpn connection. > > I made to debug stage 4 ekiga runs. First one with the vpn connection > off, second on. Where can I send them to? The mailinglist complained about the mail's size. > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From jtgalyon at gmail.com Tue Sep 30 14:33:57 2008 From: jtgalyon at gmail.com (Jason Galyon) Date: Tue, 30 Sep 2008 09:33:57 -0500 Subject: [Ekiga-list] ekiga 3.0.0 win32 build, (no rule to make target ptlib_ptlib.pc.in) *solution* Message-ID: <48E238D5.2020400@gmail.com> Following the instructions at http://wiki.ekiga.org/index.php/Cross-compile_Win32_3.0, I encountered the following problem while performing a 'make'. touch /tmp/ekiga-3.0.0/win32/lib/libexpat.a make: *** No rule to make target `/tmp/ekiga-3.0.0/win32/diff/ptlib_ptlib.pc.in', needed by `/tmp/ekiga-3.0.0/win32/ptlib/configure'. Stop. I am not sure which is the appropriate fix, but the problem is that there is no ptlib_ptlib.pc.in. Rather there is a ptlib_pwlib.pc.in. Either change the file name or change the reference to it in the makefile. Jason From ml at stdout.at Tue Sep 30 15:46:17 2008 From: ml at stdout.at (Hannes Ebner) Date: Tue, 30 Sep 2008 17:46:17 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <48E1BE74.60304@free.fr> References: <1222541900.4421.29.camel@scorpion.multitel.be> <48E1254A.8060308@stdout.at> <1222718388.5188.2.camel@scorpion.multitel.be> <48E143C4.3010500@stdout.at> <1222722898.5188.14.camel@scorpion.multitel.be> <48E149DD.8010500@stdout.at> <48E1BE74.60304@free.fr> Message-ID: <48E249C9.3090705@stdout.at> Julien Puydt wrote: > I'll try to dig it : it's definitely not normal that you see those uris > in evolution and not in ekiga :-( I played around a bit, and I noticed some additional things: I can't open Ekiga's address book more than once, when I click the menuitem a second time (after having closed the address book) nothing happens. The console says: (ekiga:11882): GLib-GObject-WARNING **: invalid unclassed pointer in cast to `GtkWidget' (ekiga:11882): Gtk-CRITICAL **: gtk_widget_show_all: assertion `GTK_IS_WIDGET (widget)' failed After I restart Ekiga it works again, but again, only once. Let me know if you need some additional debug output. I tried to edit the number of a contact in Ekiga's address book. Ekiga remembers the new number, but Evolution still has the old value. Where does Ekiga store the number? I couldn't find anything in gconf either. /Hannes From jtgalyon at gmail.com Tue Sep 30 16:13:09 2008 From: jtgalyon at gmail.com (Jason Galyon) Date: Tue, 30 Sep 2008 11:13:09 -0500 Subject: [Ekiga-list] ekiga 3.0.0 win32 cross compile Message-ID: <48E25015.8080001@gmail.com> System: Ubuntu 8.04 Note, I updated my yasm to 0.7.1-0Ubuntu1 from the Intrepid repos (direct download and install from http://launchpadlibrarian.net/15979753/yasm_0.7.1-0ubuntu1_i386.deb x264 packages installed: libx264-57 1:0.svn2007122 libx264-dev 1:0.svn2007122 x264 1:0.svn2007122 libx264.a(mc-c.o): In function `x264_hpel_filter_mmxext': /tmp/ekiga-3.0.0/win32/x264/common/x86/mc-c.c:219: undefined reference to `_x264_hpel_filter_v_mmxext' /tmp/ekiga-3.0.0/win32/x264/common/x86/mc-c.c:219: undefined reference to `_x264_hpel_filter_c_mmxext' /tmp/ekiga-3.0.0/win32/x264/common/x86/mc-c.c:219: undefined reference to `_x264_hpel_filter_h_mmxext' /tmp/ekiga-3.0.0/win32/x264/common/x86/mc-c.c:219: undefined reference to `_x264_sfence' libx264.a(mc-c.o):mc-c.c:(.rdata+0x84): undefined reference to `_x264_pixel_avg2_w4_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x88): undefined reference to `_x264_pixel_avg2_w8_cache64_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x8c): undefined reference to `_x264_pixel_avg2_w16_cache64_sse2' libx264.a(mc-c.o):mc-c.c:(.rdata+0x90): undefined reference to `_x264_pixel_avg2_w16_cache64_sse2' libx264.a(mc-c.o):mc-c.c:(.rdata+0x94): undefined reference to `_x264_pixel_avg2_w20_cache64_sse2' libx264.a(mc-c.o):mc-c.c:(.rdata+0x9c): undefined reference to `_x264_mc_copy_w4_mmx' libx264.a(mc-c.o):mc-c.c:(.rdata+0xa0): undefined reference to `_x264_mc_copy_w8_mmx' libx264.a(mc-c.o):mc-c.c:(.rdata+0xa8): undefined reference to `_x264_mc_copy_w16_sse2' libx264.a(mc-c.o):mc-c.c:(.rdata+0xb0): undefined reference to `_x264_pixel_avg2_w4_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xb4): undefined reference to `_x264_pixel_avg2_w8_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xb8): undefined reference to `_x264_pixel_avg2_w12_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xbc): undefined reference to `_x264_pixel_avg2_w16_sse2' libx264.a(mc-c.o):mc-c.c:(.rdata+0xc0): undefined reference to `_x264_pixel_avg2_w20_sse2' libx264.a(mc-c.o):mc-c.c:(.rdata+0xc8): undefined reference to `_x264_pixel_avg2_w4_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xcc): undefined reference to `_x264_pixel_avg2_w8_cache64_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xd0): undefined reference to `_x264_pixel_avg2_w12_cache64_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xd4): undefined reference to `_x264_pixel_avg2_w16_cache64_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xd8): undefined reference to `_x264_pixel_avg2_w20_cache64_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xe0): undefined reference to `_x264_mc_copy_w4_mmx' libx264.a(mc-c.o):mc-c.c:(.rdata+0xe4): undefined reference to `_x264_mc_copy_w8_mmx' libx264.a(mc-c.o):mc-c.c:(.rdata+0xec): undefined reference to `_x264_mc_copy_w16_mmx' libx264.a(mc-c.o):mc-c.c:(.rdata+0xf4): undefined reference to `_x264_pixel_avg2_w4_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xf8): undefined reference to `_x264_pixel_avg2_w8_cache32_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0xfc): undefined reference to `_x264_pixel_avg2_w12_cache32_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x100): undefined reference to `_x264_pixel_avg2_w16_cache32_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x104): undefined reference to `_x264_pixel_avg2_w20_cache32_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x10c): undefined reference to `_x264_pixel_avg2_w4_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x110): undefined reference to `_x264_pixel_avg2_w8_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x114): undefined reference to `_x264_pixel_avg2_w12_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x118): undefined reference to `_x264_pixel_avg2_w16_mmxext' libx264.a(mc-c.o):mc-c.c:(.rdata+0x11c): undefined reference to `_x264_pixel_avg2_w20_mmxext' collect2: ld returned 1 exit status make[1]: *** [x264] Error 1 make[1]: Leaving directory `/tmp/ekiga-3.0.0/win32/x264' make: *** [/tmp/ekiga-3.0.0/win32/lib/libx264.a] Error 2 From mmassonnet at gmail.com Tue Sep 30 16:52:22 2008 From: mmassonnet at gmail.com (Mike Massonnet) Date: Tue, 30 Sep 2008 18:52:22 +0200 Subject: [Ekiga-list] [Fwd: AW: [Fwd: Bug with video mode "in-picture"]] In-Reply-To: <1222767532.12501.35.camel@scorpion.multitel.be> References: <1222767532.12501.35.camel@scorpion.multitel.be> Message-ID: <20080930185222.7c0b72c0@krapton> Hi, > Hi Mike, > > there are two things you can do about the flickering: > > a) send me a ekiga -d 4 debug output with the flickering Find the attached file. Hope this helps. > b) turn of HW acceleration by enabling the following gconf key: > /apps/ekiga/general/user_interface/video_display/disable_hw_accel Works fine on the Via board, I don't know for the intel 855 (I might have tried it, not sure, I will let you know). Thanks Mike -------------- next part -------------- A non-text attachment was scrubbed... Name: ekiga-debug-4.log.bz2 Type: application/x-bzip Size: 14267 bytes Desc: not available URL: From jpuydt at free.fr Tue Sep 30 18:18:43 2008 From: jpuydt at free.fr (Julien Puydt) Date: Tue, 30 Sep 2008 20:18:43 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <48E249C9.3090705@stdout.at> References: <1222541900.4421.29.camel@scorpion.multitel.be> <48E1254A.8060308@stdout.at> <1222718388.5188.2.camel@scorpion.multitel.be> <48E143C4.3010500@stdout.at> <1222722898.5188.14.camel@scorpion.multitel.be> <48E149DD.8010500@stdout.at> <48E1BE74.60304@free.fr> <48E249C9.3090705@stdout.at> Message-ID: <48E26D83.5020206@free.fr> Hannes Ebner a ?crit : > I played around a bit, and I noticed some additional things: > > I can't open Ekiga's address book more than once, when I click the > menuitem a second time (after having closed the address book) nothing > happens. The console says: > > (ekiga:11882): GLib-GObject-WARNING **: invalid unclassed pointer in > cast to `GtkWidget' > (ekiga:11882): Gtk-CRITICAL **: gtk_widget_show_all: assertion > `GTK_IS_WIDGET (widget)' failed > > After I restart Ekiga it works again, but again, only once. > Let me know if you need some additional debug output. > That's unrelated and already fixed for 3.0.1 Snark on #ekiga From ml at stdout.at Tue Sep 30 18:33:29 2008 From: ml at stdout.at (Hannes Ebner) Date: Tue, 30 Sep 2008 20:33:29 +0200 Subject: [Ekiga-list] Upgrading to 3.0 In-Reply-To: <48E26D83.5020206@free.fr> References: <1222541900.4421.29.camel@scorpion.multitel.be> <48E1254A.8060308@stdout.at> <1222718388.5188.2.camel@scorpion.multitel.be> <48E143C4.3010500@stdout.at> <1222722898.5188.14.camel@scorpion.multitel.be> <48E149DD.8010500@stdout.at> <48E1BE74.60304@free.fr> <48E249C9.3090705@stdout.at> <48E26D83.5020206@free.fr> Message-ID: <48E270F9.4020507@stdout.at> Julien Puydt wrote: > That's unrelated and already fixed for 3.0.1 Great, thanks for the information. /Hannes From dsandras at seconix.com Tue Sep 30 21:13:41 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 30 Sep 2008 23:13:41 +0200 Subject: [Ekiga-list] ekiga 3.0.0 win32 cross compile In-Reply-To: <48E25015.8080001@gmail.com> References: <48E25015.8080001@gmail.com> Message-ID: <1222809221.15926.0.camel@scorpion.multitel.be> Le mardi 30 septembre 2008 ? 11:13 -0500, Jason Galyon a ?crit : > System: Ubuntu 8.04 > > Note, I updated my yasm to 0.7.1-0Ubuntu1 from the Intrepid repos > (direct download and install from > http://launchpadlibrarian.net/15979753/yasm_0.7.1-0ubuntu1_i386.deb > > x264 packages installed: > libx264-57 1:0.svn2007122 > libx264-dev 1:0.svn2007122 > x264 1:0.svn2007122 > > > libx264.a(mc-c.o): In function `x264_hpel_filter_mmxext': > /tmp/ekiga-3.0.0/win32/x264/common/x86/mc-c.c:219: undefined reference > to `_x264_hpel_filter_v_mmxext' > /tmp/ekiga-3.0.0/win32/x264/common/x86/mc-c.c:219: undefined reference > to `_x264_hpel_filter_c_mmxext' > /tmp/ekiga-3.0.0/win32/x264/common/x86/mc-c.c:219: undefined reference > to `_x264_hpel_filter_h_mmxext' 3.0.1 will be released soon with WIN32 binaries. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Tue Sep 30 21:23:46 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 30 Sep 2008 23:23:46 +0200 Subject: [Ekiga-list] Ubuntu packages for Ekiga 3.0 (Gutsy, Hardy and Intrepid) In-Reply-To: <1222768606.7565.7.camel@martin-desktop> References: <1222544332.18892.26.camel@achille> <1222705568.8348.15.camel@martin-desktop> <1222720868.18892.59.camel@achille> <1222764810.7565.6.camel@martin-desktop> <1222768606.7565.7.camel@martin-desktop> Message-ID: <1222809826.15926.6.camel@scorpion.multitel.be> Le mardi 30 septembre 2008 ? 11:56 +0200, Martin Kurtz a ?crit : > ok, I posted them here: > > http://pastebin.com/m811c5d6 The STUN Server replies "Blocked". Which means there is some sort of strong filtering happening. However, everything seems correct, except that some transactions time out : "Set state Terminated_Timeout for transaction 1 INVITE" > http://pastebin.com/m22796a8b The STUN server replies "Blocked" too, which confirms the first diagnostic. Except that, I see nothing specifically wrong. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net