From dsandras at seconix.com Tue Jan 1 10:29:45 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 01 Jan 2008 11:29:45 +0100 Subject: [Ekiga-list] audio plugins not detected In-Reply-To: <989880.8480.qm@web33511.mail.mud.yahoo.com> References: <989880.8480.qm@web33511.mail.mud.yahoo.com> Message-ID: <1199183385.4197.18.camel@scorpion> Hello, Le lundi 31 d?cembre 2007 ? 12:56 -0800, Vinod a ?crit : > Hi, > > I re-installed ekiga based on the link below and > managed to get it all installed. > > This time when i try to run ekiga i get the following: > > ekiga: error while loading shared libraries: > libpt_linux_x86_r.so.1.10.10: cannot open shared > object file: No such file or directory > > > So next i do $ ls /usr/lib | grep libpt > > libpthread.a > libpthread_nonshared.a > libpthread.so > libpt_linux_x86_r.so > libpt_linux_x86_r.so.2 > libpt_linux_x86_r.so.2.1 > libpt_linux_x86_r.so.2.1-beta3 > libpt.so > libpt.so.1.10 > libpt.so.1.10.10 > libpt.so.1.10.3 > libpt.so.1.10.7 > libpt.so.1.9.3 > > > > Since libpt_linux_x86_r.so.1.10.10 is not there, i > creat a symlink as: ln -s libpt.so.1.10.10 > libpt_linux_x86_r.so.1.10.10 > > and confirm the now the required library .so is there > in /usr/lib. But now running ekiga gives me a > segmentation fault(core dump) which means probably > something isnt right. Cant you tell me what? > > The other versions of libpt may be causing problems, > but I am not sure that removing those will solve my > problems. > > I had installed ptlib,pwlib,opan and ekiga in that > order with sdl disabled. I am using ubuntu gutsy. I suggest uninstalling everything. Your installation has several conflicting and missing libraries. Yannick, can you check if our packages are broken ? > Thanks in advance for any insights, > Vinod > > > > > > --- yannick wrote: > > > > > Hi, > > > > > > This is for the SVN version, but may help you for > > > dependencies: > > > > > > http://wiki.ekiga.org/index.php/Talk:Additional_Information#PTLIB > > > > > > Regards, > > > Yannick > ____________________________________________________________________________________ > > > > Looking for last minute shopping deals? > > > > Find them fast with Yahoo! Search. > > > > > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > > > _______________________________________________ > > > > ekiga-list mailing list > > > > ekiga-list at gnome.org > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > -- > > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > > sip:yannick at ekiga.net > > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > > > > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > ____________________________________________________________________________________ > > Be a better friend, newshound, and > > know-it-all with Yahoo! Mobile. Try it now. > > > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > ____________________________________________________________________________________ > Never miss a thing. Make Yahoo your home page. > http://www.yahoo.com/r/hs > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Tue Jan 1 10:30:32 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 01 Jan 2008 11:30:32 +0100 Subject: [Ekiga-list] Happy New Year Message-ID: <1199183432.4197.20.camel@scorpion> Happy New Year everyone ! Let 2008 be the year of Free VoIP. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jeanmichel.gens at free.fr Wed Jan 2 01:52:45 2008 From: jeanmichel.gens at free.fr (jeanmichel.gens) Date: Tue, 01 Jan 2008 20:52:45 -0500 Subject: [Ekiga-list] Happy New Year In-Reply-To: <1199183432.4197.20.camel@scorpion> References: <1199183432.4197.20.camel@scorpion> Message-ID: <477AEE6D.7050706@free.fr> Damien Sandras a ?crit : > Happy New Year everyone ! > > Let 2008 be the year of Free VoIP. > thank you damien Bonne ann?e a toi et ? tes proches From ed at mcdonagh.org.uk Wed Jan 2 00:05:31 2008 From: ed at mcdonagh.org.uk (Ed McDonagh) Date: Wed, 02 Jan 2008 00:05:31 +0000 Subject: [Ekiga-list] Windows/Linux: won't send video Message-ID: <1199232331.8195.21.camel@elsie-ubuntu> Hi I have tried searching the archives to see if my questions have been answered, but it didn't look like it. Apologies if you have had this scenario a thousand times before! (Please do refer me to previous solutions if they exist.) And happy new year. I am trying to use ekiga to video calls from Linux to Windows. Sound would be useful too, but video is the main use as one party is deaf. Both installs seem to set up fine, and both happily show the local video using the built in webcams (both are laptops). The problem is that when in a call from Linux to Windows, you can still only see the local video, not the remote. Versions: Linux - Ubuntu Gutsy Gibbon, Ekiga install from the repositories, version 2.0.11 Video is using V4L2 plugin. Laptop is an Asus A8SC with the onboard VGA UVC WebCam Windows - Windows XP, Ekiga from the website, version 2.0.11 Video is using VideoForWindows plugin (same behaviour for DirectShow). Laptop is a Sony Vaio VGN-SZ2XP/C with the onboard webcam. Problem details: If the call is initiated from linux, windows offers to accept the call, and the connection seems to work. However, you only see the local video. In the Windows Ekiga General History it says (among other things, including stuff about opening speex) Opened codec H261 for transmission Opened codec H261 for reception Then about 30 seconds later it says Closed codec H261 which was opened for transmission Closed codec H261 which was opened for reception (and the same for SPEEX). Remote user is unreachable As far as the linux general history is concerned, the call is still open no problem! If the call is initiated from Windows, the general history log in windows says that the Remote user rejected the call. In reality, linux never comes up with an accept/reject option :-( I don't know if there are several different problems here, or if it is all the same cause. If anyone can help, or give some ideas of what to try, I would really appreciate it. We use video to communicate with my mother in law, so if I can get this working that would be great. Both systems can use Skype for video calls, but I can't get the picture quality I want, and would rather avoid skype and proprietary solutions if I can. With sign language, the frame rate is more important than the absolute image quality most of the time, so I was quite excited to see that you could set a preference for this with ekiga. Kind regards, Ed McDonagh From parrisdc at gmail.com Wed Jan 2 01:30:05 2008 From: parrisdc at gmail.com (Don Parris) Date: Tue, 1 Jan 2008 20:30:05 -0500 Subject: [Ekiga-list] PC-To-Phone Account Setup Not Working Message-ID: <1eba300b0801011730v31bbd015g5f80e2b383dd8b3@mail.gmail.com> Hi all, I'm running gNewSense-KDE (Ubuntu-based), and Ekiga 2.0.1. I have registered a SIP account through Ekiga.net, and all seems to work fairly well. However, I thought about trying to use the PC-to-Phone service, but when I attempt to setup the account using the dialog in Ekiga (Tools --> PC-to-Phone Account --> Get an Ekiga PC-to-Phone Account), absolutely nothing happens. I have both Firefox and Konqueror installed, but neither loads any web page from which I can register an account. Since all the documentation says to use that button (and seemingly nothing else), I thought I would ask if there are any work-arounds for this problem. I did not see any in the manual. It does create a PC-to-Phone account in the accounts list, but nothing else happens. Thanks, Don -- D.C. Parris Minister, Journalist, Free Software Advocate https://www.xing.com/profile/Don_Parris http://www.linkedin.com/in/dcparris -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Wed Jan 2 11:48:49 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 02 Jan 2008 12:48:49 +0100 Subject: [Ekiga-list] PC-To-Phone Account Setup Not Working In-Reply-To: <1eba300b0801011730v31bbd015g5f80e2b383dd8b3@mail.gmail.com> References: <1eba300b0801011730v31bbd015g5f80e2b383dd8b3@mail.gmail.com> Message-ID: <1199274529.4372.20.camel@scorpion> Hi, Le mardi 01 janvier 2008 ? 20:30 -0500, Don Parris a ?crit : > Hi all, > > I'm running gNewSense-KDE (Ubuntu-based), and Ekiga 2.0.1. I have > registered a SIP account through Ekiga.net, and all seems to work > fairly well. However, I thought about trying to use the PC-to-Phone > service, but when I attempt to setup the account using the dialog in > Ekiga (Tools --> PC-to-Phone Account --> Get an Ekiga PC-to-Phone > Account), absolutely nothing happens. I have both Firefox and > Konqueror installed, but neither loads any web page from which I can > register an account. Since all the documentation says to use that > button (and seemingly nothing else), I thought I would ask if there > are any work-arounds for this problem. I did not see any in the > manual. > > It does create a PC-to-Phone account in the accounts list, but nothing > else happens. This question has been answered several times on this mailing list. It means your installation is not correctly done. Are you 100% sure that gnome-default-applications-properties is configured to open links with a browser that is installed on your system ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Jan 2 11:49:33 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 02 Jan 2008 12:49:33 +0100 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199232331.8195.21.camel@elsie-ubuntu> References: <1199232331.8195.21.camel@elsie-ubuntu> Message-ID: <1199274573.4372.22.camel@scorpion> Hi, Le mercredi 02 janvier 2008 ? 00:05 +0000, Ed McDonagh a ?crit : > Hi > > I have tried searching the archives to see if my questions have been > answered, but it didn't look like it. Apologies if you have had this > scenario a thousand times before! (Please do refer me to previous > solutions if they exist.) And happy new year. > > I am trying to use ekiga to video calls from Linux to Windows. Sound > would be useful too, but video is the main use as one party is deaf. > > Both installs seem to set up fine, and both happily show the local video > using the built in webcams (both are laptops). The problem is that when > in a call from Linux to Windows, you can still only see the local video, > not the remote. > > Versions: > Linux - Ubuntu Gutsy Gibbon, Ekiga install from the repositories, > version 2.0.11 > Video is using V4L2 plugin. > Laptop is an Asus A8SC with the onboard VGA UVC WebCam > > Windows - Windows XP, Ekiga from the website, version 2.0.11 > Video is using VideoForWindows plugin (same behaviour for DirectShow). > Laptop is a Sony Vaio VGN-SZ2XP/C with the onboard webcam. > > Problem details: > If the call is initiated from linux, windows offers to accept the call, > and the connection seems to work. However, you only see the local video. > In the Windows Ekiga General History it says (among other things, > including stuff about opening speex) > Opened codec H261 for transmission > Opened codec H261 for reception > Then about 30 seconds later it says > Closed codec H261 which was opened for transmission > Closed codec H261 which was opened for reception > (and the same for SPEEX). > Remote user is unreachable > > As far as the linux general history is concerned, the call is still open > no problem! > > If the call is initiated from Windows, the general history log in > windows says that the Remote user rejected the call. In reality, linux > never comes up with an accept/reject option :-( > > I don't know if there are several different problems here, or if it is > all the same cause. > > If anyone can help, or give some ideas of what to try, I would really > appreciate it. We use video to communicate with my mother in law, so if > I can get this working that would be great. > > Both systems can use Skype for video calls, but I can't get the picture > quality I want, and would rather avoid skype and proprietary solutions > if I can. With sign language, the frame rate is more important than the > absolute image quality most of the time, so I was quite excited to see > that you could set a preference for this with ekiga. > You should upload debug 4 outputs for both sides so that we can determine what happens. Before doing that, please ensure that both Ekiga installations can successfully run the echo test on ekiga.net. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From lurch at gmx.li Wed Jan 2 12:12:51 2008 From: lurch at gmx.li (Stefan Bruens) Date: Wed, 02 Jan 2008 13:12:51 +0100 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199232331.8195.21.camel@elsie-ubuntu> References: <1199232331.8195.21.camel@elsie-ubuntu> Message-ID: <200801021312.55041.lurch@gmx.li> Am Mittwoch, 2. Januar 2008 01:05:31 schrieb Ed McDonagh: > [...] > Problem details: > If the call is initiated from linux, windows offers to accept the call, > and the connection seems to work. However, you only see the local video. > In the Windows Ekiga General History it says (among other things, > including stuff about opening speex) > Opened codec H261 for transmission > Opened codec H261 for reception > Then about 30 seconds later it says > Closed codec H261 which was opened for transmission > Closed codec H261 which was opened for reception > (and the same for SPEEX). > Remote user is unreachable > > As far as the linux general history is concerned, the call is still open > no problem! > > If the call is initiated from Windows, the general history log in > windows says that the Remote user rejected the call. In reality, linux > never comes up with an accept/reject option :-( This sounds like a firewall issue. How are these two computers connected? Do you have any iptables rules blocking access (run: sudo iptables -L). Also you may have the wrong iterface selected listening for incoming data, Preferences->Protocols->Network Settings Happy New Year, Stefan -- Stefan Br?ns / Kastanienweg 6 - Zimmer 1206 / 52074 Aachen mailto:lurch at gmx.li http://www.kawo1.rwth-aachen.de/~lurchi/ phone: +49 241 169-4206 mobile: +49 160 3797725 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part. URL: From geekvinod at yahoo.com Wed Jan 2 20:54:17 2008 From: geekvinod at yahoo.com (Vinod) Date: Wed, 2 Jan 2008 12:54:17 -0800 (PST) Subject: [Ekiga-list] audio plugins not detected In-Reply-To: <1199183385.4197.18.camel@scorpion> Message-ID: <996853.91321.qm@web33507.mail.mud.yahoo.com> Can someone confirm that I need to install both ptlib and pwlib? The link yannick sent me below only installs ptlib for ubuntu, but in documentation on ekiga web site as well as forum posts I see only pwlib being installed. The answer to this might help me avoid using any extra libraries. Thanks, Vinod --- Damien Sandras wrote: > Hello, > > Le lundi 31 d?cembre 2007 ? 12:56 -0800, Vinod a > ?crit : > > Hi, > > > > I re-installed ekiga based on the link below and > > managed to get it all installed. > > > > This time when i try to run ekiga i get the > following: > > > > ekiga: error while loading shared libraries: > > libpt_linux_x86_r.so.1.10.10: cannot open shared > > object file: No such file or directory > > > > > > So next i do $ ls /usr/lib | grep libpt > > > > libpthread.a > > libpthread_nonshared.a > > libpthread.so > > libpt_linux_x86_r.so > > libpt_linux_x86_r.so.2 > > libpt_linux_x86_r.so.2.1 > > libpt_linux_x86_r.so.2.1-beta3 > > libpt.so > > libpt.so.1.10 > > libpt.so.1.10.10 > > libpt.so.1.10.3 > > libpt.so.1.10.7 > > libpt.so.1.9.3 > > > > > > > > Since libpt_linux_x86_r.so.1.10.10 is not there, i > > creat a symlink as: ln -s libpt.so.1.10.10 > > libpt_linux_x86_r.so.1.10.10 > > > > and confirm the now the required library .so is > there > > in /usr/lib. But now running ekiga gives me a > > segmentation fault(core dump) which means probably > > something isnt right. Cant you tell me what? > > > > The other versions of libpt may be causing > problems, > > but I am not sure that removing those will solve > my > > problems. > > > > I had installed ptlib,pwlib,opan and ekiga in that > > order with sdl disabled. I am using ubuntu gutsy. > > > I suggest uninstalling everything. Your installation > has several > conflicting and missing libraries. > > Yannick, can you check if our packages are broken ? > > > Thanks in advance for any insights, > > Vinod > > > > > > > > > > --- yannick wrote: > > > > > > > Hi, > > > > > > > > This is for the SVN version, but may help you > for > > > > dependencies: > > > > > > > > > > http://wiki.ekiga.org/index.php/Talk:Additional_Information#PTLIB > > > > > > > > Regards, > > > > Yannick > > > ____________________________________________________________________________________ > > > > > Looking for last minute shopping deals? > > > > > Find them fast with Yahoo! Search. > > > > > > > > > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > > > > > _______________________________________________ > > > > > ekiga-list mailing list > > > > > ekiga-list at gnome.org > > > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > -- > > > > Me joindre en t?l?phonie IP / vid?oconf?rence > ? > > > > sip:yannick at ekiga.net > > > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > > > > > > > > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > > > > > > _______________________________________________ > > > > ekiga-list mailing list > > > > ekiga-list at gnome.org > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > Be a better friend, newshound, and > > > know-it-all with Yahoo! Mobile. Try it now. > > > > > > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > > > > > > > > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > ____________________________________________________________________________________ > > Never miss a thing. Make Yahoo your home page. > > http://www.yahoo.com/r/hs > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ From dsandras at seconix.com Wed Jan 2 21:15:15 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 02 Jan 2008 22:15:15 +0100 Subject: [Ekiga-list] audio plugins not detected In-Reply-To: <996853.91321.qm@web33507.mail.mud.yahoo.com> References: <996853.91321.qm@web33507.mail.mud.yahoo.com> Message-ID: <1199308515.4227.6.camel@scorpion> SVN uses ptlib (which is just pwlib renamed into ptlib). Le mercredi 02 janvier 2008 ? 12:54 -0800, Vinod a ?crit : > Can someone confirm that I need to install both ptlib > and pwlib? > > The link yannick sent me below only installs ptlib for > ubuntu, but in documentation on ekiga web site as well > as forum posts I see only pwlib being installed. The > answer to this might help me avoid using any extra > libraries. > > Thanks, > Vinod > > --- Damien Sandras wrote: > > > Hello, > > > > Le lundi 31 d?cembre 2007 ? 12:56 -0800, Vinod a > > ?crit : > > > Hi, > > > > > > I re-installed ekiga based on the link below and > > > managed to get it all installed. > > > > > > This time when i try to run ekiga i get the > > following: > > > > > > ekiga: error while loading shared libraries: > > > libpt_linux_x86_r.so.1.10.10: cannot open shared > > > object file: No such file or directory > > > > > > > > > So next i do $ ls /usr/lib | grep libpt > > > > > > libpthread.a > > > libpthread_nonshared.a > > > libpthread.so > > > libpt_linux_x86_r.so > > > libpt_linux_x86_r.so.2 > > > libpt_linux_x86_r.so.2.1 > > > libpt_linux_x86_r.so.2.1-beta3 > > > libpt.so > > > libpt.so.1.10 > > > libpt.so.1.10.10 > > > libpt.so.1.10.3 > > > libpt.so.1.10.7 > > > libpt.so.1.9.3 > > > > > > > > > > > > Since libpt_linux_x86_r.so.1.10.10 is not there, i > > > creat a symlink as: ln -s libpt.so.1.10.10 > > > libpt_linux_x86_r.so.1.10.10 > > > > > > and confirm the now the required library .so is > > there > > > in /usr/lib. But now running ekiga gives me a > > > segmentation fault(core dump) which means probably > > > something isnt right. Cant you tell me what? > > > > > > The other versions of libpt may be causing > > problems, > > > but I am not sure that removing those will solve > > my > > > problems. > > > > > > I had installed ptlib,pwlib,opan and ekiga in that > > > order with sdl disabled. I am using ubuntu gutsy. > > > > > > I suggest uninstalling everything. Your installation > > has several > > conflicting and missing libraries. > > > > Yannick, can you check if our packages are broken ? > > > > > Thanks in advance for any insights, > > > Vinod > > > > > > > > > > > > > > --- yannick wrote: > > > > > > > > > Hi, > > > > > > > > > > This is for the SVN version, but may help you > > for > > > > > dependencies: > > > > > > > > > > > > > > > http://wiki.ekiga.org/index.php/Talk:Additional_Information#PTLIB > > > > > > > > > > Regards, > > > > > Yannick > > > > > > ____________________________________________________________________________________ > > > > > > Looking for last minute shopping deals? > > > > > > Find them fast with Yahoo! Search. > > > > > > > > > > > > > > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > > > > > > > _______________________________________________ > > > > > > ekiga-list mailing list > > > > > > ekiga-list at gnome.org > > > > > > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > -- > > > > > Me joindre en t?l?phonie IP / vid?oconf?rence > > ? > > > > > sip:yannick at ekiga.net > > > > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > > > > > > > > > > > > > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > > > > > > > > > _______________________________________________ > > > > > ekiga-list mailing list > > > > > ekiga-list at gnome.org > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > > Be a better friend, newshound, and > > > > know-it-all with Yahoo! Mobile. Try it now. > > > > > > > > > > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > > > > > > > > > > > > > > _______________________________________________ > > > > ekiga-list mailing list > > > > ekiga-list at gnome.org > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > Never miss a thing. Make Yahoo your home page. > > > http://www.yahoo.com/r/hs > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -- > > _ Damien Sandras > > (o- > > //\ Ekiga Softphone : http://www.ekiga.org/ > > v_/_ NOVACOM : http://www.novacom.be/ > > FOSDEM : http://www.fosdem.org/ > > SIP Phone : sip:dsandras at ekiga.net > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > ____________________________________________________________________________________ > Be a better friend, newshound, and > know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ed at mcdonagh.org.uk Wed Jan 2 21:27:40 2008 From: ed at mcdonagh.org.uk (Ed McDonagh) Date: Wed, 02 Jan 2008 21:27:40 +0000 Subject: [Ekiga-list] Windows/Linux: won't send video Message-ID: <1199309260.6188.16.camel@elsie-ubuntu> Apologies if you get this twice - the first version was too big, so I am trying with a smaller version - I hope the moderator deletes the first! -------- Forwarded Message -------- From: Ed McDonagh To: Ekiga mailing list Subject: Re: [Ekiga-list] Windows/Linux: won't send video Date: Wed, 02 Jan 2008 21:13:34 +0000 On Wed, 2008-01-02 at 12:49 +0100, Damien Sandras wrote: > Hi, > > Le mercredi 02 janvier 2008 ? 00:05 +0000, Ed McDonagh a ?crit : > > Hi > > > > Versions: > > Linux - Ubuntu Gutsy Gibbon, Ekiga install from the repositories, > > version 2.0.11 > > Video is using V4L2 plugin. > > Laptop is an Asus A8SC with the onboard VGA UVC WebCam > > > > Windows - Windows XP, Ekiga from the website, version 2.0.11 > > Video is using VideoForWindows plugin (same behaviour for DirectShow). > > Laptop is a Sony Vaio VGN-SZ2XP/C with the onboard webcam. > > > > Problem details: > > If the call is initiated from linux, windows offers to accept the call, > > and the connection seems to work. However, you only see the local video. > > In the Windows Ekiga General History it says (among other things, > > including stuff about opening speex) > > Opened codec H261 for transmission > > Opened codec H261 for reception > > Then about 30 seconds later it says > > Closed codec H261 which was opened for transmission > > Closed codec H261 which was opened for reception > > (and the same for SPEEX). > > Remote user is unreachable > > > > As far as the linux general history is concerned, the call is still open > > no problem! > > > > If the call is initiated from Windows, the general history log in > > windows says that the Remote user rejected the call. In reality, linux > > never comes up with an accept/reject option :-( > > > > You should upload debug 4 outputs for both sides so that we can > determine what happens. > > Before doing that, please ensure that both Ekiga installations can > successfully run the echo test on ekiga.net. > -- > _ Damien Sandras Thank you Damien and Stefan. I have successfully run the echo test for both laptops(audio and video, linux and windows), and I am quite excited about the framerate/image quality control, which along with the control of max bandwidth control is going to be great! I presume this rules out a firewall issue? At the moment, both computers are on the same wlan, which is useful for testing. However, in real use the computers are going to be on opposite sides of the country. I have attached the debug from linux, and the stderr from windows. The stderr doesn't seem to contain much, and the stdout and the 'x' file are both empty. However, the linux file seems to have lots in. The behaviour described yesterday has swapped today, with a call started on linux never connecting, and a call starting on Windows connects, but quits after half a minute or so on linux. In the log, I have done as above. The first call is initiated on linux from ed.mcdonagh to hilary.sutherland. Windows never receives the call. The second call is initiated from Windows, and accepted on linux. The video is never transmitted either way (voice is harder to tell when they are both on my lap!) and the call is terminated by linux after half a minute or so. Windows doesn't know the call has stopped. Thanks. Ed -------------- next part -------------- A non-text attachment was scrubbed... Name: ekigadebug.tar.gz Type: application/x-compressed-tar Size: 13457 bytes Desc: not available URL: From dsandras at seconix.com Wed Jan 2 21:31:39 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 02 Jan 2008 22:31:39 +0100 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199309260.6188.16.camel@elsie-ubuntu> References: <1199309260.6188.16.camel@elsie-ubuntu> Message-ID: <1199309499.4227.10.camel@scorpion> There is something severely broken with your setup. Every PDU you send is sent back to you ! Please start from clean settings... Le mercredi 02 janvier 2008 ? 21:27 +0000, Ed McDonagh a ?crit : > Apologies if you get this twice - the first version was too big, so I am > trying with a smaller version - I hope the moderator deletes the first! > > -------- Forwarded Message -------- > From: Ed McDonagh > To: Ekiga mailing list > Subject: Re: [Ekiga-list] Windows/Linux: won't send video > Date: Wed, 02 Jan 2008 21:13:34 +0000 > > On Wed, 2008-01-02 at 12:49 +0100, Damien Sandras wrote: > > Hi, > > > > Le mercredi 02 janvier 2008 ? 00:05 +0000, Ed McDonagh a ?crit : > > > Hi > > > > > > > Versions: > > > Linux - Ubuntu Gutsy Gibbon, Ekiga install from the repositories, > > > version 2.0.11 > > > Video is using V4L2 plugin. > > > Laptop is an Asus A8SC with the onboard VGA UVC WebCam > > > > > > Windows - Windows XP, Ekiga from the website, version 2.0.11 > > > Video is using VideoForWindows plugin (same behaviour for DirectShow). > > > Laptop is a Sony Vaio VGN-SZ2XP/C with the onboard webcam. > > > > > > Problem details: > > > If the call is initiated from linux, windows offers to accept the call, > > > and the connection seems to work. However, you only see the local video. > > > In the Windows Ekiga General History it says (among other things, > > > including stuff about opening speex) > > > Opened codec H261 for transmission > > > Opened codec H261 for reception > > > Then about 30 seconds later it says > > > Closed codec H261 which was opened for transmission > > > Closed codec H261 which was opened for reception > > > (and the same for SPEEX). > > > Remote user is unreachable > > > > > > As far as the linux general history is concerned, the call is still open > > > no problem! > > > > > > If the call is initiated from Windows, the general history log in > > > windows says that the Remote user rejected the call. In reality, linux > > > never comes up with an accept/reject option :-( > > > > > > > > You should upload debug 4 outputs for both sides so that we can > > determine what happens. > > > > Before doing that, please ensure that both Ekiga installations can > > successfully run the echo test on ekiga.net. > > -- > > _ Damien Sandras > > Thank you Damien and Stefan. > > I have successfully run the echo test for both laptops(audio and video, > linux and windows), and I am quite excited about the framerate/image > quality control, which along with the control of max bandwidth control > is going to be great! > > I presume this rules out a firewall issue? At the moment, both computers > are on the same wlan, which is useful for testing. However, in real use > the computers are going to be on opposite sides of the country. > > I have attached the debug from linux, and the stderr from windows. The > stderr doesn't seem to contain much, and the stdout and the 'x' file are > both empty. However, the linux file seems to have lots in. > > The behaviour described yesterday has swapped today, with a call started > on linux never connecting, and a call starting on Windows connects, but > quits after half a minute or so on linux. > > In the log, I have done as above. The first call is initiated on linux > from ed.mcdonagh to hilary.sutherland. Windows never receives the call. > > The second call is initiated from Windows, and accepted on linux. The > video is never transmitted either way (voice is harder to tell when they > are both on my lap!) and the call is terminated by linux after half a > minute or so. Windows doesn't know the call has stopped. > > Thanks. > > Ed > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ed at mcdonagh.org.uk Wed Jan 2 21:41:51 2008 From: ed at mcdonagh.org.uk (Ed McDonagh) Date: Wed, 02 Jan 2008 21:41:51 +0000 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199309499.4227.10.camel@scorpion> References: <1199309260.6188.16.camel@elsie-ubuntu> <1199309499.4227.10.camel@scorpion> Message-ID: <1199310111.6188.18.camel@elsie-ubuntu> Windows or linux or both? Clean settings - remove software and start again? On Wed, 2008-01-02 at 22:31 +0100, Damien Sandras wrote: > There is something severely broken with your setup. > > Every PDU you send is sent back to you ! > > Please start from clean settings... > > Le mercredi 02 janvier 2008 ? 21:27 +0000, Ed McDonagh a ?crit : > > Apologies if you get this twice - the first version was too big, so I am > > trying with a smaller version - I hope the moderator deletes the first! > > > > -------- Forwarded Message -------- > > From: Ed McDonagh > > To: Ekiga mailing list > > Subject: Re: [Ekiga-list] Windows/Linux: won't send video > > Date: Wed, 02 Jan 2008 21:13:34 +0000 > > > > On Wed, 2008-01-02 at 12:49 +0100, Damien Sandras wrote: > > > Hi, > > > > > > Le mercredi 02 janvier 2008 ? 00:05 +0000, Ed McDonagh a ?crit : > > > > Hi > > > > > > > > > > Versions: > > > > Linux - Ubuntu Gutsy Gibbon, Ekiga install from the repositories, > > > > version 2.0.11 > > > > Video is using V4L2 plugin. > > > > Laptop is an Asus A8SC with the onboard VGA UVC WebCam > > > > > > > > Windows - Windows XP, Ekiga from the website, version 2.0.11 > > > > Video is using VideoForWindows plugin (same behaviour for DirectShow). > > > > Laptop is a Sony Vaio VGN-SZ2XP/C with the onboard webcam. > > > > > > > > Problem details: > > > > If the call is initiated from linux, windows offers to accept the call, > > > > and the connection seems to work. However, you only see the local video. > > > > In the Windows Ekiga General History it says (among other things, > > > > including stuff about opening speex) > > > > Opened codec H261 for transmission > > > > Opened codec H261 for reception > > > > Then about 30 seconds later it says > > > > Closed codec H261 which was opened for transmission > > > > Closed codec H261 which was opened for reception > > > > (and the same for SPEEX). > > > > Remote user is unreachable > > > > > > > > As far as the linux general history is concerned, the call is still open > > > > no problem! > > > > > > > > If the call is initiated from Windows, the general history log in > > > > windows says that the Remote user rejected the call. In reality, linux > > > > never comes up with an accept/reject option :-( > > > > > > > > > > > > You should upload debug 4 outputs for both sides so that we can > > > determine what happens. > > > > > > Before doing that, please ensure that both Ekiga installations can > > > successfully run the echo test on ekiga.net. > > > -- > > > _ Damien Sandras > > > > Thank you Damien and Stefan. > > > > I have successfully run the echo test for both laptops(audio and video, > > linux and windows), and I am quite excited about the framerate/image > > quality control, which along with the control of max bandwidth control > > is going to be great! > > > > I presume this rules out a firewall issue? At the moment, both computers > > are on the same wlan, which is useful for testing. However, in real use > > the computers are going to be on opposite sides of the country. > > > > I have attached the debug from linux, and the stderr from windows. The > > stderr doesn't seem to contain much, and the stdout and the 'x' file are > > both empty. However, the linux file seems to have lots in. > > > > The behaviour described yesterday has swapped today, with a call started > > on linux never connecting, and a call starting on Windows connects, but > > quits after half a minute or so on linux. > > > > In the log, I have done as above. The first call is initiated on linux > > from ed.mcdonagh to hilary.sutherland. Windows never receives the call. > > > > The second call is initiated from Windows, and accepted on linux. The > > video is never transmitted either way (voice is harder to tell when they > > are both on my lap!) and the call is terminated by linux after half a > > minute or so. Windows doesn't know the call has stopped. > > > > Thanks. > > > > Ed > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From dsandras at seconix.com Wed Jan 2 21:52:06 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 02 Jan 2008 22:52:06 +0100 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199310111.6188.18.camel@elsie-ubuntu> References: <1199309260.6188.16.camel@elsie-ubuntu> <1199309499.4227.10.camel@scorpion> <1199310111.6188.18.camel@elsie-ubuntu> Message-ID: <1199310726.4227.12.camel@scorpion> Linux. Clean settings = try with another user or remove all ekiga settings (user preferences). Le mercredi 02 janvier 2008 ? 21:41 +0000, Ed McDonagh a ?crit : > Windows or linux or both? > > Clean settings - remove software and start again? > > On Wed, 2008-01-02 at 22:31 +0100, Damien Sandras wrote: > > There is something severely broken with your setup. > > > > Every PDU you send is sent back to you ! > > > > Please start from clean settings... > > > > Le mercredi 02 janvier 2008 ? 21:27 +0000, Ed McDonagh a ?crit : > > > Apologies if you get this twice - the first version was too big, so I am > > > trying with a smaller version - I hope the moderator deletes the first! > > > > > > -------- Forwarded Message -------- > > > From: Ed McDonagh > > > To: Ekiga mailing list > > > Subject: Re: [Ekiga-list] Windows/Linux: won't send video > > > Date: Wed, 02 Jan 2008 21:13:34 +0000 > > > > > > On Wed, 2008-01-02 at 12:49 +0100, Damien Sandras wrote: > > > > Hi, > > > > > > > > Le mercredi 02 janvier 2008 ? 00:05 +0000, Ed McDonagh a ?crit : > > > > > Hi > > > > > > > > > > > > > Versions: > > > > > Linux - Ubuntu Gutsy Gibbon, Ekiga install from the repositories, > > > > > version 2.0.11 > > > > > Video is using V4L2 plugin. > > > > > Laptop is an Asus A8SC with the onboard VGA UVC WebCam > > > > > > > > > > Windows - Windows XP, Ekiga from the website, version 2.0.11 > > > > > Video is using VideoForWindows plugin (same behaviour for DirectShow). > > > > > Laptop is a Sony Vaio VGN-SZ2XP/C with the onboard webcam. > > > > > > > > > > Problem details: > > > > > If the call is initiated from linux, windows offers to accept the call, > > > > > and the connection seems to work. However, you only see the local video. > > > > > In the Windows Ekiga General History it says (among other things, > > > > > including stuff about opening speex) > > > > > Opened codec H261 for transmission > > > > > Opened codec H261 for reception > > > > > Then about 30 seconds later it says > > > > > Closed codec H261 which was opened for transmission > > > > > Closed codec H261 which was opened for reception > > > > > (and the same for SPEEX). > > > > > Remote user is unreachable > > > > > > > > > > As far as the linux general history is concerned, the call is still open > > > > > no problem! > > > > > > > > > > If the call is initiated from Windows, the general history log in > > > > > windows says that the Remote user rejected the call. In reality, linux > > > > > never comes up with an accept/reject option :-( > > > > > > > > > > > > > > > > You should upload debug 4 outputs for both sides so that we can > > > > determine what happens. > > > > > > > > Before doing that, please ensure that both Ekiga installations can > > > > successfully run the echo test on ekiga.net. > > > > -- > > > > _ Damien Sandras > > > > > > Thank you Damien and Stefan. > > > > > > I have successfully run the echo test for both laptops(audio and video, > > > linux and windows), and I am quite excited about the framerate/image > > > quality control, which along with the control of max bandwidth control > > > is going to be great! > > > > > > I presume this rules out a firewall issue? At the moment, both computers > > > are on the same wlan, which is useful for testing. However, in real use > > > the computers are going to be on opposite sides of the country. > > > > > > I have attached the debug from linux, and the stderr from windows. The > > > stderr doesn't seem to contain much, and the stdout and the 'x' file are > > > both empty. However, the linux file seems to have lots in. > > > > > > The behaviour described yesterday has swapped today, with a call started > > > on linux never connecting, and a call starting on Windows connects, but > > > quits after half a minute or so on linux. > > > > > > In the log, I have done as above. The first call is initiated on linux > > > from ed.mcdonagh to hilary.sutherland. Windows never receives the call. > > > > > > The second call is initiated from Windows, and accepted on linux. The > > > video is never transmitted either way (voice is harder to tell when they > > > are both on my lap!) and the call is terminated by linux after half a > > > minute or so. Windows doesn't know the call has stopped. > > > > > > Thanks. > > > > > > Ed > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -- > > _ Damien Sandras > > (o- > > //\ Ekiga Softphone : http://www.ekiga.org/ > > v_/_ NOVACOM : http://www.novacom.be/ > > FOSDEM : http://www.fosdem.org/ > > SIP Phone : sip:dsandras at ekiga.net > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ed at mcdonagh.org.uk Wed Jan 2 22:45:21 2008 From: ed at mcdonagh.org.uk (Ed McDonagh) Date: Wed, 02 Jan 2008 22:45:21 +0000 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199310726.4227.12.camel@scorpion> References: <1199309260.6188.16.camel@elsie-ubuntu> <1199309499.4227.10.camel@scorpion> <1199310111.6188.18.camel@elsie-ubuntu> <1199310726.4227.12.camel@scorpion> Message-ID: <1199313921.7654.3.camel@elsie-ubuntu> Tried removing account, and setting up again, and had trouble with the video 'not working with the format'. Uninstalled, rebooted, installed again. Video now works locally again, but it remembers all my settings. Where are the settings for ekiga? I tried looking for /home/user/.ekiga, but there wasn't anything there. Currently, I can initiate the call from either computer, and it doesn't terminate at one end. However, it still only shows local video. On Wed, 2008-01-02 at 22:52 +0100, Damien Sandras wrote: > Linux. > > Clean settings = try with another user or remove all ekiga settings > (user preferences). > > Le mercredi 02 janvier 2008 ? 21:41 +0000, Ed McDonagh a ?crit : > > Windows or linux or both? > > > > Clean settings - remove software and start again? > > > > On Wed, 2008-01-02 at 22:31 +0100, Damien Sandras wrote: > > > There is something severely broken with your setup. > > > > > > Every PDU you send is sent back to you ! > > > > > > Please start from clean settings... > > > > > > Le mercredi 02 janvier 2008 ? 21:27 +0000, Ed McDonagh a ?crit : > > > > Apologies if you get this twice - the first version was too big, so I am > > > > trying with a smaller version - I hope the moderator deletes the first! > > > > > > > > -------- Forwarded Message -------- > > > > From: Ed McDonagh > > > > To: Ekiga mailing list > > > > Subject: Re: [Ekiga-list] Windows/Linux: won't send video > > > > Date: Wed, 02 Jan 2008 21:13:34 +0000 > > > > > > > > On Wed, 2008-01-02 at 12:49 +0100, Damien Sandras wrote: > > > > > Hi, > > > > > > > > > > Le mercredi 02 janvier 2008 ? 00:05 +0000, Ed McDonagh a ?crit : > > > > > > Hi > > > > > > > > > > > > > > > > Versions: > > > > > > Linux - Ubuntu Gutsy Gibbon, Ekiga install from the repositories, > > > > > > version 2.0.11 > > > > > > Video is using V4L2 plugin. > > > > > > Laptop is an Asus A8SC with the onboard VGA UVC WebCam > > > > > > > > > > > > Windows - Windows XP, Ekiga from the website, version 2.0.11 > > > > > > Video is using VideoForWindows plugin (same behaviour for DirectShow). > > > > > > Laptop is a Sony Vaio VGN-SZ2XP/C with the onboard webcam. > > > > > > > > > > > > Problem details: > > > > > > If the call is initiated from linux, windows offers to accept the call, > > > > > > and the connection seems to work. However, you only see the local video. > > > > > > In the Windows Ekiga General History it says (among other things, > > > > > > including stuff about opening speex) > > > > > > Opened codec H261 for transmission > > > > > > Opened codec H261 for reception > > > > > > Then about 30 seconds later it says > > > > > > Closed codec H261 which was opened for transmission > > > > > > Closed codec H261 which was opened for reception > > > > > > (and the same for SPEEX). > > > > > > Remote user is unreachable > > > > > > > > > > > > As far as the linux general history is concerned, the call is still open > > > > > > no problem! > > > > > > > > > > > > If the call is initiated from Windows, the general history log in > > > > > > windows says that the Remote user rejected the call. In reality, linux > > > > > > never comes up with an accept/reject option :-( > > > > > > > > > > > > > > > > > > > > You should upload debug 4 outputs for both sides so that we can > > > > > determine what happens. > > > > > > > > > > Before doing that, please ensure that both Ekiga installations can > > > > > successfully run the echo test on ekiga.net. > > > > > -- > > > > > _ Damien Sandras > > > > > > > > Thank you Damien and Stefan. > > > > > > > > I have successfully run the echo test for both laptops(audio and video, > > > > linux and windows), and I am quite excited about the framerate/image > > > > quality control, which along with the control of max bandwidth control > > > > is going to be great! > > > > > > > > I presume this rules out a firewall issue? At the moment, both computers > > > > are on the same wlan, which is useful for testing. However, in real use > > > > the computers are going to be on opposite sides of the country. > > > > > > > > I have attached the debug from linux, and the stderr from windows. The > > > > stderr doesn't seem to contain much, and the stdout and the 'x' file are > > > > both empty. However, the linux file seems to have lots in. > > > > > > > > The behaviour described yesterday has swapped today, with a call started > > > > on linux never connecting, and a call starting on Windows connects, but > > > > quits after half a minute or so on linux. > > > > > > > > In the log, I have done as above. The first call is initiated on linux > > > > from ed.mcdonagh to hilary.sutherland. Windows never receives the call. > > > > > > > > The second call is initiated from Windows, and accepted on linux. The > > > > video is never transmitted either way (voice is harder to tell when they > > > > are both on my lap!) and the call is terminated by linux after half a > > > > minute or so. Windows doesn't know the call has stopped. > > > > > > > > Thanks. > > > > > > > > Ed > > > > _______________________________________________ > > > > ekiga-list mailing list > > > > ekiga-list at gnome.org > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > -- > > > _ Damien Sandras > > > (o- > > > //\ Ekiga Softphone : http://www.ekiga.org/ > > > v_/_ NOVACOM : http://www.novacom.be/ > > > FOSDEM : http://www.fosdem.org/ > > > SIP Phone : sip:dsandras at ekiga.net > > > > > > > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From parrisdc at gmail.com Thu Jan 3 01:55:50 2008 From: parrisdc at gmail.com (Don Parris) Date: Wed, 2 Jan 2008 20:55:50 -0500 Subject: [Ekiga-list] PC-To-Phone Account Setup Not Working In-Reply-To: <1199274529.4372.20.camel@scorpion> References: <1eba300b0801011730v31bbd015g5f80e2b383dd8b3@mail.gmail.com> <1199274529.4372.20.camel@scorpion> Message-ID: <1eba300b0801021755i45388272r5a9c91ebb5106fec@mail.gmail.com> On Jan 2, 2008 6:48 AM, Damien Sandras wrote: > Hi, > > Le mardi 01 janvier 2008 ? 20:30 -0500, Don Parris a ?crit : > > Hi all, > > > > I'm running gNewSense-KDE (Ubuntu-based), and Ekiga 2.0.1. I have > > registered a SIP account through Ekiga.net, and all seems to work > > fairly well. However, I thought about trying to use the PC-to-Phone > > service, but when I attempt to setup the account using the dialog in > > Ekiga (Tools --> PC-to-Phone Account --> Get an Ekiga PC-to-Phone > > Account), absolutely nothing happens. I have both Firefox and > > Konqueror installed, but neither loads any web page from which I can > > register an account. Since all the documentation says to use that > > button (and seemingly nothing else), I thought I would ask if there > > are any work-arounds for this problem. I did not see any in the > > manual. > > > > It does create a PC-to-Phone account in the accounts list, but nothing > > else happens. > > This question has been answered several times on this mailing list. > It means your installation is not correctly done. > > Are you 100% sure that gnome-default-applications-properties is > configured to open links with a browser that is installed on your > system ? > -- > Hi Damien, Per my OP, I'm running KDE, not GNOME. But Firefox is selected as the default browser. I did try switching to Konqueror, but to no avail. Yes, Firefox has been re-branded as "Burning Dog", but the executable is the same. I used Adept to pull down Ekiga from my distro's official repository, so I didn't do anything out of the ordinary in my installation. I can use one of the other PC-to-Phone providers, but prefer to support Ekiga through your partner, if possible. Thanks for taking the time to help. Don -- D.C. Parris Minister, Journalist, Free Software Advocate https://www.xing.com/profile/Don_Parris http://www.linkedin.com/in/dcparris -------------- next part -------------- An HTML attachment was scrubbed... URL: From lurch at gmx.li Thu Jan 3 12:11:02 2008 From: lurch at gmx.li (Stefan Bruens) Date: Thu, 03 Jan 2008 13:11:02 +0100 Subject: [Ekiga-list] PC-To-Phone Account Setup Not Working In-Reply-To: <1eba300b0801021755i45388272r5a9c91ebb5106fec@mail.gmail.com> References: <1eba300b0801011730v31bbd015g5f80e2b383dd8b3@mail.gmail.com> <1199274529.4372.20.camel@scorpion> <1eba300b0801021755i45388272r5a9c91ebb5106fec@mail.gmail.com> Message-ID: <200801031311.05741.lurch@gmx.li> Am Donnerstag, 3. Januar 2008 02:55:50 schrieb Don Parris: > Hi Damien, > > Per my OP, I'm running KDE, not GNOME. But Firefox is selected as the > default browser. I did try switching to Konqueror, but to no avail. > > Yes, Firefox has been re-branded as "Burning Dog", but the executable is > the same. I used Adept to pull down Ekiga from my distro's official > repository, so I didn't do anything out of the ordinary in my installation. > I can use one of the other PC-to-Phone providers, but prefer to support > Ekiga through your partner, if possible. > > Thanks for taking the time to help. > > Don Read the topic " in KDE cannot open URL's from Tools->PC-to-phone account", dated from 13.08.2006 in the archives. Stefan -- Stefan Br?ns / Kastanienweg 6 - Zimmer 1206 / 52074 Aachen mailto:lurch at gmx.li http://www.kawo1.rwth-aachen.de/~lurchi/ phone: +49 241 169-4206 mobile: +49 160 3797725 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part. URL: From dsandras at seconix.com Thu Jan 3 16:50:10 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 03 Jan 2008 17:50:10 +0100 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199313921.7654.3.camel@elsie-ubuntu> References: <1199309260.6188.16.camel@elsie-ubuntu> <1199309499.4227.10.camel@scorpion> <1199310111.6188.18.camel@elsie-ubuntu> <1199310726.4227.12.camel@scorpion> <1199313921.7654.3.camel@elsie-ubuntu> Message-ID: <1199379010.13693.28.camel@scorpion> Le mercredi 02 janvier 2008 ? 22:45 +0000, Ed McDonagh a ?crit : > Tried removing account, and setting up again, and had trouble with the > video 'not working with the format'. Uninstalled, rebooted, installed > again. Video now works locally again, but it remembers all my settings. > > Where are the settings for ekiga? I tried looking for /home/user/.ekiga, > but there wasn't anything there. It is stored by gconf. I think rm -rf .apps/ekiga/ && killall -9 gconfd-2 should remove all settings so you can start from scratch. > Currently, I can initiate the call from either computer, and it doesn't > terminate at one end. However, it still only shows local video. As I said, you are in communication with yourself (not sure how it can happen). Everything you send is mirrored back to you. I have never seen something so weird happen. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From parrisdc at gmail.com Thu Jan 3 23:28:43 2008 From: parrisdc at gmail.com (Don Parris) Date: Thu, 3 Jan 2008 18:28:43 -0500 Subject: [Ekiga-list] PC-To-Phone Account Setup Not Working In-Reply-To: <200801031311.05741.lurch@gmx.li> References: <1eba300b0801011730v31bbd015g5f80e2b383dd8b3@mail.gmail.com> <1199274529.4372.20.camel@scorpion> <1eba300b0801021755i45388272r5a9c91ebb5106fec@mail.gmail.com> <200801031311.05741.lurch@gmx.li> Message-ID: <1eba300b0801031528k2d4f3dbdo4f320621aaeadc89@mail.gmail.com> On Jan 3, 2008 7:11 AM, Stefan Bruens wrote: > Am Donnerstag, 3. Januar 2008 02:55:50 schrieb Don Parris: > > Hi Damien, > > > > Per my OP, I'm running KDE, not GNOME. But Firefox is selected as the > > default browser. I did try switching to Konqueror, but to no avail. > > > > Yes, Firefox has been re-branded as "Burning Dog", but the executable > is > > the same. I used Adept to pull down Ekiga from my distro's official > > repository, so I didn't do anything out of the ordinary in my > installation. > > I can use one of the other PC-to-Phone providers, but prefer to support > > Ekiga through your partner, if possible. > > > > Thanks for taking the time to help. > > > > Don > > Read the topic " in KDE cannot open URL's from Tools->PC-to-phone > account", > dated from 13.08.2006 in the archives. > > Stefan > > Thanks Stefan, I read it and will try that tip when I get back to my laptop. I didn't think to search on KDE. Cheers, Don -- D.C. Parris Minister, Journalist, Free Software Advocate https://www.xing.com/profile/Don_Parris http://www.linkedin.com/in/dcparris sip:dcparris at ekiga.net -------------- next part -------------- An HTML attachment was scrubbed... URL: From ed at mcdonagh.org.uk Thu Jan 3 23:56:34 2008 From: ed at mcdonagh.org.uk (Ed McDonagh) Date: Thu, 03 Jan 2008 23:56:34 +0000 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199379010.13693.28.camel@scorpion> References: <1199309260.6188.16.camel@elsie-ubuntu> <1199309499.4227.10.camel@scorpion> <1199310111.6188.18.camel@elsie-ubuntu> <1199310726.4227.12.camel@scorpion> <1199313921.7654.3.camel@elsie-ubuntu> <1199379010.13693.28.camel@scorpion> Message-ID: <1199404594.8062.15.camel@elsie-ubuntu> On Thu, 2008-01-03 at 17:50 +0100, Damien Sandras wrote: > As I said, you are in communication with yourself (not sure how it can > happen). Everything you send is mirrored back to you. I have never seen > something so weird happen. Seems the wierdness continues. I have uninstalled ekiga, deleted the settings in gconf, reinstalled, added profile, seems behaviour is the same :-( I have attached the debug. Initial attempt at connection from linux to windows failed. Connection in the other direction seemed to work, but failed after 30 odd seconds on the linux end. Is it the same thing? Is my install somehow doomed? Thanks for your advice so far. Ed -------------- next part -------------- A non-text attachment was scrubbed... Name: postreinstall.txt.tar.gz Type: application/x-compressed-tar Size: 12378 bytes Desc: not available URL: From dsandras at seconix.com Fri Jan 4 09:10:27 2008 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 04 Jan 2008 10:10:27 +0100 Subject: [Ekiga-list] Windows/Linux: won't send video In-Reply-To: <1199404594.8062.15.camel@elsie-ubuntu> References: <1199309260.6188.16.camel@elsie-ubuntu> <1199309499.4227.10.camel@scorpion> <1199310111.6188.18.camel@elsie-ubuntu> <1199310726.4227.12.camel@scorpion> <1199313921.7654.3.camel@elsie-ubuntu> <1199379010.13693.28.camel@scorpion> <1199404594.8062.15.camel@elsie-ubuntu> Message-ID: <1199437827.4255.10.camel@scorpion> Le jeudi 03 janvier 2008 ? 23:56 +0000, Ed McDonagh a ?crit : > > On Thu, 2008-01-03 at 17:50 +0100, Damien Sandras wrote: > > > As I said, you are in communication with yourself (not sure how it can > > happen). Everything you send is mirrored back to you. I have never seen > > something so weird happen. > > Seems the wierdness continues. I have uninstalled ekiga, deleted the > settings in gconf, reinstalled, added profile, seems behaviour is the > same :-( I will explain you how to understand the debug output so that you can try several things. But first of all, I think it is your router doing weird things. Are both users on the same LAN behind the same NAT router ? In that case, it could be possible that the router routes back the outgoing request to you. Look at the outgoing invite : 2008/01/03 23:27:12.032 0:35.521 GMURLHandler:08127240 SIP Sending PDU on udp$86.64.162.35:5060 INVITE sip:hilary.sutherland at ekiga.net SIP/2.0 You are sending from 80.175.228.178:5065 an INVITE to hilary. The INVITE is sent to 86.64.162.35. Then a bit after : PDU Received on udp$86.64.162.35:5060 INVITE sip:hilary.sutherland at 80.175.228.178:5063;transport=udp SIP/2.0 You receive what you have sent. Two possibilities : 1) your router is broken 2) your router is using port overloading, and both users are behind the same LAN. As discussed a few times on this mailing list, it does not work most of the time in that case. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From gm_ail at gmx.at Sat Jan 5 17:37:59 2008 From: gm_ail at gmx.at (Georg Michelitsch) Date: Sat, 05 Jan 2008 18:37:59 +0100 Subject: [Ekiga-list] Ekiga startup time Message-ID: <477FC077.5040707@gmx.at> Hello alltogether, I'm experiencing a quite long startup time of ekiga even if its working fine apart from that fact. By "long" I mean approximately a minute. I can't give you any further informations as there are no errors or messages reported and ekiga runs fine after once started up. I'm running Slackware 12.0 with a 2.6.24-rc6 Kernel and an up-to-date dropline gnome installation. Feel free to ask if you need more detailed informations. If there are any known issues concerning my problem please give me some hints :) See you and thanks in advance, Georg -- From JimBodkins at yahoo.com Sat Jan 5 18:54:20 2008 From: JimBodkins at yahoo.com (Jim Bodkikns (CHMS)) Date: Sat, 05 Jan 2008 11:54:20 -0700 Subject: [Ekiga-list] windows dll entry point error Message-ID: <477FD25C.80706@yahoo.com> Hi, I receive 'The procedure entry point g_ascii_strtoll could not be located in teh dynamic link library libglib-2.0-0.dll" when I laungh Ekiga (Version download as of Jan 4, 2008). I'm sure this is due to my having a number of gnome/glib/gtk apps installed (WinXP Pro SP2). I'm not sure you can do a thing about this (now), but you might consider coexistence issues for future releases. I have written gnome apps (gtk+, gnome, libgnomeprintui etc) and understand what a moving target they have created. :( (Seems like political infighting resulting in massive deprecation and added functionality) I am a current skype user and am looking to switch to something. I'm not sure what it is that I am currently running that needs libglib-2.0 (instead of 2.12), but whatever it is, it will probably fail with 2.12. So I'll wait to see what happens with Ekiga. I wish you had a forum. :) Thanks Jim From Joseph.Comfort at asu.edu Sat Jan 5 22:08:15 2008 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Sat, 05 Jan 2008 15:08:15 -0700 Subject: [Ekiga-list] No sound from Ekiga Message-ID: <477FFFCF.80103@asu.edu> I have been using gnomemeeting quite well for a long time. My system is a dual Opteron 244 running SuSE 10.1 (64-bit). I have been upgrading some of my computers, first to SuSE 10.2 and then 10.3. I have never been able to get ekiga to work, at least for sound, on these computers. One of them is identical in hardware with my main (10.1) system. (The others have a variety of hardware, including one in 32-bit mode.) I have done a close comparison of the ekiga configuration files and the sound controls (KMix in KDE) for the two systems that have identical hardware, and they are as close as possible. The audio device is a AMD8111 on the motherboard (which works with gnomemeeting). I am able to connect to a site (h323) with which I need to communicate. The MCU is recognized. The audio tab in ekiga shows communication 'OUT' as PCMU/H261, but nothing is listed for 'IN'. When I connect, the microphone slider is somewhere in the middle, but the speaker slider is at zero. If I move the speaker slider, both sliders go to zero and can not be changed. I have tried everything I know about or can think of, and nothing has been successful. I would have expected that ekiga would have worked about as well as gnomemeeting, and that upgrading the system should not have compromised things as much as this. Maybe it is a simple configuration issue somewhere, but I am out of ideas. I need to update my 10.1 computer, but can not do so until I solve the ekiga problem so that I can communicate as well as before. If anyone has some ideas or suggestions, please let me know. Thank you. Joe From jack.delbert at gmail.com Sun Jan 6 03:27:37 2008 From: jack.delbert at gmail.com (Jack Smith) Date: Sat, 5 Jan 2008 22:27:37 -0500 Subject: [Ekiga-list] Microphone doesn't work Message-ID: Hi, I'm using Ekiga on Linux, Fedora 8, with a Logitech QuickCam Comunicate STX. My microphone does not work. Not when testing with the Communicate Druid, not when calling 500.ekiga.net, and not when I connect to another user. I can see them, they can see me, and I can hear them; but they can't hear me. Any idea where I should look for my problem? My input device is USB Device 0x46d 0x8d7, which I assume is my QuickCam. -- Jack Smith English doesn't borrow from other languages -- English follows other languages down dark alleys and takes what it wants. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jack.delbert at gmail.com Sun Jan 6 18:54:25 2008 From: jack.delbert at gmail.com (Jack Smith) Date: Sun, 6 Jan 2008 13:54:25 -0500 Subject: [Ekiga-list] Microphone doesn't work In-Reply-To: References: Message-ID: Never mind. It appears that none of my microphones work since I upgraded to Fedora 8 so this doesn't appear to be a question for this list. On Jan 5, 2008 10:27 PM, Jack Smith wrote: > Hi, > > I'm using Ekiga on Linux, Fedora 8, with a Logitech QuickCam Comunicate > STX. My microphone does not work. Not when testing with the Communicate > Druid, not when calling 500.ekiga.net , and not when I connect to another > user. I can see them, they can see me, and I can hear them; but they can't > hear me. Any idea where I should look for my problem? My input device is > USB Device 0x46d 0x8d7, which I assume is my QuickCam. > > -- > Jack Smith > > English doesn't borrow from other languages -- English follows other > languages down dark alleys and takes what it wants. -- Jack Smith English doesn't borrow from other languages -- English follows other languages down dark alleys and takes what it wants. -------------- next part -------------- An HTML attachment was scrubbed... URL: From dford at ansur.demon.co.uk Sun Jan 6 22:01:19 2008 From: dford at ansur.demon.co.uk (David Ford) Date: Sun, 06 Jan 2008 22:01:19 +0000 Subject: [Ekiga-list] Microphone doesn't work In-Reply-To: References: Message-ID: <47814FAF.6030904@ansur.demon.co.uk> Hi Jack I had to remove PulseAudio to get my audio working after installing FC8. PluseAudio seems to only work with about half the audio applications. David Jack Smith wrote: > Never mind. It appears that none of my microphones work since I > upgraded to Fedora 8 so this doesn't appear to be a question for this > list. > > On Jan 5, 2008 10:27 PM, Jack Smith < jack.delbert at gmail.com > > wrote: > > Hi, > > I'm using Ekiga on Linux, Fedora 8, with a Logitech QuickCam > Comunicate STX. My microphone does not work. Not when testing > with the Communicate Druid, not when calling 500.ekiga.net > , and not when I connect to another user. I > can see them, they can see me, and I can hear them; but they can't > hear me. Any idea where I should look for my problem? My input > device is USB Device 0x46d 0x8d7, which I assume is my QuickCam. > > -- > Jack Smith > > English doesn't borrow from other languages -- English follows > other languages down dark alleys and takes what it wants. > > > > > -- > Jack Smith > > English doesn't borrow from other languages -- English follows other > languages down dark alleys and takes what it wants. > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From dsandras at seconix.com Sun Jan 6 22:36:59 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 06 Jan 2008 23:36:59 +0100 Subject: [Ekiga-list] Ekiga startup time In-Reply-To: <477FC077.5040707@gmx.at> References: <477FC077.5040707@gmx.at> Message-ID: <1199659019.6237.6.camel@scorpion> Hello, Le samedi 05 janvier 2008 ? 18:37 +0100, Georg Michelitsch a ?crit : > Hello alltogether, > > I'm experiencing a quite long startup time of ekiga even if its working > fine apart from that fact. By "long" I mean approximately a minute. I > can't give you any further informations as there are no errors or > messages reported and ekiga runs fine after once started up. > I'm running Slackware 12.0 with a 2.6.24-rc6 Kernel and an up-to-date > dropline gnome installation. Feel free to ask if you need more detailed > informations. > > If there are any known issues concerning my problem please give me some > hints :) Perhaps you should try to strace ekiga and see if you understand where it looses time. That is very very weird. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sun Jan 6 22:37:44 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 06 Jan 2008 23:37:44 +0100 Subject: [Ekiga-list] No sound from Ekiga In-Reply-To: <477FFFCF.80103@asu.edu> References: <477FFFCF.80103@asu.edu> Message-ID: <1199659064.6237.10.camel@scorpion> Le samedi 05 janvier 2008 ? 15:08 -0700, Joseph Comfort a ?crit : > I have been using gnomemeeting quite well for a long time. My system is > a dual Opteron 244 running SuSE 10.1 (64-bit). I have been upgrading > some of my computers, first to SuSE 10.2 and then 10.3. I have never > been able to get ekiga to work, at least for sound, on these computers. > One of them is identical in hardware with my main (10.1) system. (The > others have a variety of hardware, including one in 32-bit mode.) I > have done a close comparison of the ekiga configuration files and the > sound controls (KMix in KDE) for the two systems that have identical > hardware, and they are as close as possible. The audio device is a > AMD8111 on the motherboard (which works with gnomemeeting). > > I am able to connect to a site (h323) with which I need to communicate. > The MCU is recognized. The audio tab in ekiga shows communication 'OUT' > as PCMU/H261, but nothing is listed for 'IN'. When I connect, the > microphone slider is somewhere in the middle, but the speaker slider is > at zero. If I move the speaker slider, both sliders go to zero and can > not be changed. > > I have tried everything I know about or can think of, and nothing has > been successful. I would have expected that ekiga would have worked > about as well as gnomemeeting, and that upgrading the system should not > have compromised things as much as this. Maybe it is a simple > configuration issue somewhere, but I am out of ideas. I need to update > my 10.1 computer, but can not do so until I solve the ekiga problem so > that I can communicate as well as before. > > If anyone has some ideas or suggestions, please let me know. Thank you. > Isn't that a simple firewall configuration issue ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jack.delbert at gmail.com Mon Jan 7 01:39:53 2008 From: jack.delbert at gmail.com (Jack Smith) Date: Sun, 6 Jan 2008 20:39:53 -0500 Subject: [Ekiga-list] Microphone doesn't work In-Reply-To: <47814FAF.6030904@ansur.demon.co.uk> References: <47814FAF.6030904@ansur.demon.co.uk> Message-ID: On Jan 6, 2008 5:01 PM, David Ford wrote: > Hi Jack > I had to remove PulseAudio to get my audio working after installing FC8. > PluseAudio seems to only work with about half the audio applications. > David > OK, I feel dumb. There's a box to check in alsamixer to use the microphone jack on the front of my box. I still don't know how to make the USB mike on my webcamera work but at least it isn't a specifically Ekiga problem. -- Jack Smith English doesn't borrow from other languages -- English follows other languages down dark alleys and takes what it wants. -------------- next part -------------- An HTML attachment was scrubbed... URL: From rankincj at yahoo.com Mon Jan 7 15:14:17 2008 From: rankincj at yahoo.com (Chris Rankin) Date: Mon, 7 Jan 2008 15:14:17 +0000 (GMT) Subject: [Ekiga-list] Microphone doesn't work In-Reply-To: Message-ID: <675432.87599.qm@web52903.mail.re2.yahoo.com> --- Jack Smith wrote: > I still don't know how to make the USB mike on > my webcamera work but at least it isn't a specifically Ekiga problem. I am also have non-ekiga-specific trouble recording from USB webcams, e.g. $ arecord -t wav -f cd -d 5 -D webcam > testing.wav should record 5 seconds of sound from the PCM device called "webcam" that I have defined in my .asoundrc file as: pcm.webcam { type plug slave { pcm "hw:1,0" } } (sound card index 1). However, depending on the webcam, I either get 5 seconds of silence instead, or arecord hangs, or it actually works in one case. There's definitely something funny going on... Cheers, Chris __________________________________________________________ Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com From jack.delbert at gmail.com Mon Jan 7 15:34:33 2008 From: jack.delbert at gmail.com (Jack Smith) Date: Mon, 7 Jan 2008 10:34:33 -0500 Subject: [Ekiga-list] Microphone doesn't work In-Reply-To: <675432.87599.qm@web52903.mail.re2.yahoo.com> References: <675432.87599.qm@web52903.mail.re2.yahoo.com> Message-ID: On Jan 7, 2008 10:14 AM, Chris Rankin wrote: > --- Jack Smith wrote: > > I still don't know how to make the USB mike on > > my webcamera work but at least it isn't a specifically Ekiga problem. > > I am also have non-ekiga-specific trouble recording from USB webcams, e.g. > > $ arecord -t wav -f cd -d 5 -D webcam > testing.wav > > should record 5 seconds of sound from the PCM device called "webcam" that > I have defined in my > .asoundrc file as: > > pcm.webcam { > type plug > slave { > pcm "hw:1,0" > } > } > > (sound card index 1). However, depending on the webcam, I either get 5 > seconds of silence instead, > or arecord hangs, or it actually works in one case. There's definitely > something funny going on... > > Cheers, > Chris > Yeah, both Ekiga and Audacity _show_ the USB microphone, they just won't _use_ it. -- Jack Smith English doesn't borrow from other languages -- English follows other languages down dark alleys and takes what it wants. -------------- next part -------------- An HTML attachment was scrubbed... URL: From geekvinod at yahoo.com Mon Jan 7 18:52:05 2008 From: geekvinod at yahoo.com (Vinod) Date: Mon, 7 Jan 2008 10:52:05 -0800 (PST) Subject: [Ekiga-list] audio plugins not detected In-Reply-To: <1199308515.4227.6.camel@scorpion> Message-ID: <161735.35834.qm@web33507.mail.mud.yahoo.com> what does pwlib need to find a correct pthreads installation? I deleted some libpthread files by mistake, and since then pwlib configure script complains that "must have pthreads" and does not proceed. I reinstalled libc6,g++ and some other packages to ensure pthreads is back up, or so I hope. But pwlib still does not find pthreads. What is it looking for?, so that I can try to fix the exact files it needs. I had a difficult time trying to guess looking at the configure script. Vinod --- Damien Sandras wrote: > SVN uses ptlib (which is just pwlib renamed into > ptlib). > > Le mercredi 02 janvier 2008 ? 12:54 -0800, Vinod a > ?crit : > > Can someone confirm that I need to install both > ptlib > > and pwlib? > > > > The link yannick sent me below only installs ptlib > for > > ubuntu, but in documentation on ekiga web site as > well > > as forum posts I see only pwlib being installed. > The > > answer to this might help me avoid using any extra > > libraries. > > > > Thanks, > > Vinod > > > > --- Damien Sandras wrote: > > > > > Hello, > > > > > > Le lundi 31 d?cembre 2007 ? 12:56 -0800, Vinod a > > > ?crit : > > > > Hi, > > > > > > > > I re-installed ekiga based on the link below > and > > > > managed to get it all installed. > > > > > > > > This time when i try to run ekiga i get the > > > following: > > > > > > > > ekiga: error while loading shared libraries: > > > > libpt_linux_x86_r.so.1.10.10: cannot open > shared > > > > object file: No such file or directory > > > > > > > > > > > > So next i do $ ls /usr/lib | grep libpt > > > > > > > > libpthread.a > > > > libpthread_nonshared.a > > > > libpthread.so > > > > libpt_linux_x86_r.so > > > > libpt_linux_x86_r.so.2 > > > > libpt_linux_x86_r.so.2.1 > > > > libpt_linux_x86_r.so.2.1-beta3 > > > > libpt.so > > > > libpt.so.1.10 > > > > libpt.so.1.10.10 > > > > libpt.so.1.10.3 > > > > libpt.so.1.10.7 > > > > libpt.so.1.9.3 > > > > > > > > > > > > > > > > Since libpt_linux_x86_r.so.1.10.10 is not > there, i > > > > creat a symlink as: ln -s libpt.so.1.10.10 > > > > libpt_linux_x86_r.so.1.10.10 > > > > > > > > and confirm the now the required library .so > is > > > there > > > > in /usr/lib. But now running ekiga gives me a > > > > segmentation fault(core dump) which means > probably > > > > something isnt right. Cant you tell me what? > > > > > > > > The other versions of libpt may be causing > > > problems, > > > > but I am not sure that removing those will > solve > > > my > > > > problems. > > > > > > > > I had installed ptlib,pwlib,opan and ekiga in > that > > > > order with sdl disabled. I am using ubuntu > gutsy. > > > > > > > > > I suggest uninstalling everything. Your > installation > > > has several > > > conflicting and missing libraries. > > > > > > Yannick, can you check if our packages are > broken ? > > > > > > > Thanks in advance for any insights, > > > > Vinod > > > > > > > > > > > > > > > > > > --- yannick wrote: > > > > > > > > > > > Hi, > > > > > > > > > > > > This is for the SVN version, but may help > you > > > for > > > > > > dependencies: > > > > > > > > > > > > > > > > > > > > > http://wiki.ekiga.org/index.php/Talk:Additional_Information#PTLIB > > > > > > > > > > > > Regards, > > > > > > Yannick > > > > > > > > > > ____________________________________________________________________________________ > > > > > > > Looking for last minute shopping deals? > > > > > > > > Find them fast with Yahoo! Search. > > > > > > > > > > > > > > > > > > > > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > > > > > > > > > _______________________________________________ > > > > > > > ekiga-list mailing list > > > > > > > ekiga-list at gnome.org > > > > > > > > > > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > -- > > > > > > Me joindre en t?l?phonie IP / > vid?oconf?rence > > > ? > > > > > > sip:yannick at ekiga.net > > > > > > Logiciel de VoIP Ekiga : > http://www.ekiga.org > > > > > > > > > > > > > > > > > > > > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > > > > > > > > > > > > _______________________________________________ > > > > > > ekiga-list mailing list > > > > > > ekiga-list at gnome.org > > > > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > > > Be a better friend, newshound, and > > > > > know-it-all with Yahoo! Mobile. Try it now. > > > > > > > > > > > > > > > > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > ekiga-list mailing list > > > > > ekiga-list at gnome.org > > > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > > Never miss a thing. Make Yahoo your home > page. > > > > http://www.yahoo.com/r/hs > > > > > _______________________________________________ > > > > ekiga-list mailing list > > > > ekiga-list at gnome.org > === message truncated === ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping From dsandras at seconix.com Mon Jan 7 19:32:36 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 07 Jan 2008 20:32:36 +0100 Subject: [Ekiga-list] audio plugins not detected In-Reply-To: <161735.35834.qm@web33507.mail.mud.yahoo.com> References: <161735.35834.qm@web33507.mail.mud.yahoo.com> Message-ID: <1199734356.4197.2.camel@scorpion> Le lundi 07 janvier 2008 ? 10:52 -0800, Vinod a ?crit : > what does pwlib need to find a correct pthreads > installation? > > I deleted some libpthread files by mistake, and since > then pwlib configure script complains that "must have > pthreads" and does not proceed. > > I reinstalled libc6,g++ and some other packages to > ensure pthreads is back up, or so I hope. But pwlib > still does not find pthreads. > > What is it looking for?, so that I can try to fix the > exact files it needs. I had a difficult time trying to > guess looking at the configure script. Isn't it provided by libc6-dev ? A system without pthreads support is nearly unuseful... > > Vinod > > --- Damien Sandras wrote: > > > SVN uses ptlib (which is just pwlib renamed into > > ptlib). > > > > Le mercredi 02 janvier 2008 ? 12:54 -0800, Vinod a > > ?crit : > > > Can someone confirm that I need to install both > > ptlib > > > and pwlib? > > > > > > The link yannick sent me below only installs ptlib > > for > > > ubuntu, but in documentation on ekiga web site as > > well > > > as forum posts I see only pwlib being installed. > > The > > > answer to this might help me avoid using any extra > > > libraries. > > > > > > Thanks, > > > Vinod > > > > > > --- Damien Sandras wrote: > > > > > > > Hello, > > > > > > > > Le lundi 31 d?cembre 2007 ? 12:56 -0800, Vinod a > > > > ?crit : > > > > > Hi, > > > > > > > > > > I re-installed ekiga based on the link below > > and > > > > > managed to get it all installed. > > > > > > > > > > This time when i try to run ekiga i get the > > > > following: > > > > > > > > > > ekiga: error while loading shared libraries: > > > > > libpt_linux_x86_r.so.1.10.10: cannot open > > shared > > > > > object file: No such file or directory > > > > > > > > > > > > > > > So next i do $ ls /usr/lib | grep libpt > > > > > > > > > > libpthread.a > > > > > libpthread_nonshared.a > > > > > libpthread.so > > > > > libpt_linux_x86_r.so > > > > > libpt_linux_x86_r.so.2 > > > > > libpt_linux_x86_r.so.2.1 > > > > > libpt_linux_x86_r.so.2.1-beta3 > > > > > libpt.so > > > > > libpt.so.1.10 > > > > > libpt.so.1.10.10 > > > > > libpt.so.1.10.3 > > > > > libpt.so.1.10.7 > > > > > libpt.so.1.9.3 > > > > > > > > > > > > > > > > > > > > Since libpt_linux_x86_r.so.1.10.10 is not > > there, i > > > > > creat a symlink as: ln -s libpt.so.1.10.10 > > > > > libpt_linux_x86_r.so.1.10.10 > > > > > > > > > > and confirm the now the required library .so > > is > > > > there > > > > > in /usr/lib. But now running ekiga gives me a > > > > > segmentation fault(core dump) which means > > probably > > > > > something isnt right. Cant you tell me what? > > > > > > > > > > The other versions of libpt may be causing > > > > problems, > > > > > but I am not sure that removing those will > > solve > > > > my > > > > > problems. > > > > > > > > > > I had installed ptlib,pwlib,opan and ekiga in > > that > > > > > order with sdl disabled. I am using ubuntu > > gutsy. > > > > > > > > > > > > I suggest uninstalling everything. Your > > installation > > > > has several > > > > conflicting and missing libraries. > > > > > > > > Yannick, can you check if our packages are > > broken ? > > > > > > > > > Thanks in advance for any insights, > > > > > Vinod > > > > > > > > > > > > > > > > > > > > > > --- yannick wrote: > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > This is for the SVN version, but may help > > you > > > > for > > > > > > > dependencies: > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://wiki.ekiga.org/index.php/Talk:Additional_Information#PTLIB > > > > > > > > > > > > > > Regards, > > > > > > > Yannick > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > > > > > > Looking for last minute shopping deals? > > > > > > > > > > Find them fast with Yahoo! Search. > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > > > > > > > > > > > _______________________________________________ > > > > > > > > ekiga-list mailing list > > > > > > > > ekiga-list at gnome.org > > > > > > > > > > > > > > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > > > -- > > > > > > > Me joindre en t?l?phonie IP / > > vid?oconf?rence > > > > ? > > > > > > > sip:yannick at ekiga.net > > > > > > > Logiciel de VoIP Ekiga : > > http://www.ekiga.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > ekiga-list mailing list > > > > > > > ekiga-list at gnome.org > > > > > > > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > > > > Be a better friend, newshound, and > > > > > > know-it-all with Yahoo! Mobile. Try it now. > > > > > > > > > > > > > > > > > > > > > > > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > ekiga-list mailing list > > > > > > ekiga-list at gnome.org > > > > > > > > > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > > > Never miss a thing. Make Yahoo your home > > page. > > > > > http://www.yahoo.com/r/hs > > > > > > > _______________________________________________ > > > > > ekiga-list mailing list > > > > > ekiga-list at gnome.org > > > === message truncated === > > > > ____________________________________________________________________________________ > Looking for last minute shopping deals? > Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From Joseph.Comfort at asu.edu Mon Jan 7 22:14:11 2008 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Mon, 07 Jan 2008 15:14:11 -0700 Subject: [Ekiga-list] No sound from Ekiga In-Reply-To: <1199659064.6237.10.camel@scorpion> References: <477FFFCF.80103@asu.edu> <1199659064.6237.10.camel@scorpion> Message-ID: <4782A433.3070400@asu.edu> Damien Sandras wrote: > Le samedi 05 janvier 2008 ? 15:08 -0700, Joseph Comfort a ?crit : >> I have been using gnomemeeting quite well for a long time. My system is >> a dual Opteron 244 running SuSE 10.1 (64-bit). I have been upgrading >> some of my computers, first to SuSE 10.2 and then 10.3. I have never >> been able to get ekiga to work, at least for sound, on these computers. >> One of them is identical in hardware with my main (10.1) system. (The >> others have a variety of hardware, including one in 32-bit mode.) I >> have done a close comparison of the ekiga configuration files and the >> sound controls (KMix in KDE) for the two systems that have identical >> hardware, and they are as close as possible. The audio device is a >> AMD8111 on the motherboard (which works with gnomemeeting). >> >> I am able to connect to a site (h323) with which I need to communicate. >> The MCU is recognized. The audio tab in ekiga shows communication 'OUT' >> as PCMU/H261, but nothing is listed for 'IN'. When I connect, the >> microphone slider is somewhere in the middle, but the speaker slider is >> at zero. If I move the speaker slider, both sliders go to zero and can >> not be changed. >> >> I have tried everything I know about or can think of, and nothing has >> been successful. I would have expected that ekiga would have worked >> about as well as gnomemeeting, and that upgrading the system should not >> have compromised things as much as this. Maybe it is a simple >> configuration issue somewhere, but I am out of ideas. I need to update >> my 10.1 computer, but can not do so until I solve the ekiga problem so >> that I can communicate as well as before. >> >> If anyone has some ideas or suggestions, please let me know. Thank you. >> > > Isn't that a simple firewall configuration issue ? I don't think so. I have the firewalls turned off on my computers. The various SuSE sound configurations are set, and the 'Tests' all produce sounds. I don't know why gnomemeeting should work, but ekiga does not on the same hardware, but with a later system release. If something changed some esoteric configuration, I have not found it. Joe From sagar.1986 at gmail.com Tue Jan 8 17:50:50 2008 From: sagar.1986 at gmail.com (sagar n) Date: Tue, 8 Jan 2008 23:20:50 +0530 Subject: [Ekiga-list] Regarding http proxy Message-ID: <61a3ee3b0801080950s5c7b464ft53eeecac5914f159@mail.gmail.com> I have been using ekiga in home and it worked fine. However, now in college, they have implemented HTTP proxy on port 80, and I have been given an username and passwd. I have no clue as to where I should put these in, and the result: registration failed. I dont know how to approach the problem, please help. -- Sagar N. From jack.delbert at gmail.com Tue Jan 8 18:03:14 2008 From: jack.delbert at gmail.com (Jack Smith) Date: Tue, 8 Jan 2008 13:03:14 -0500 Subject: [Ekiga-list] Regarding http proxy In-Reply-To: <61a3ee3b0801080950s5c7b464ft53eeecac5914f159@mail.gmail.com> References: <61a3ee3b0801080950s5c7b464ft53eeecac5914f159@mail.gmail.com> Message-ID: On Jan 8, 2008 12:50 PM, sagar n wrote: > I have been using ekiga in home and it worked fine. However, now in > college, they have implemented HTTP proxy on port 80, and I have been > given an username and passwd. I have no clue as to where I should put > these in, and the result: registration failed. > > I dont know how to approach the problem, please help. > I'm guessing, never having done this, but in Ekiga Preferences, Protocols, SIP Settings, there's a place for an outbound proxy and a forward url Good luck -- Jack Smith English doesn't borrow from other languages -- English follows other languages down dark alleys and takes what it wants. -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Tue Jan 8 18:04:03 2008 From: michel.memeteau at gmail.com (michel memeteau) Date: Tue, 8 Jan 2008 19:04:03 +0100 Subject: [Ekiga-list] Regarding http proxy In-Reply-To: <61a3ee3b0801080950s5c7b464ft53eeecac5914f159@mail.gmail.com> References: <61a3ee3b0801080950s5c7b464ft53eeecac5914f159@mail.gmail.com> Message-ID: 2008/1/8, sagar n : > > I have been using ekiga in home and it worked fine. However, now in > college, they have implemented HTTP proxy on port 80, As Said several times SIP does not support by default tunneling through an http proxy. As I said on a previous message it seems one of the simple way to do http proxy with SIP on LInux right now , seems to be to use OpenWengo BUT you will be using a wengo SIP account and video won't really work with others. it's what I use at work and iot kinda work. -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0874763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at gizmoproject.com jabber/GoogleTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From agostino.maurotto at email.it Thu Jan 10 22:59:49 2008 From: agostino.maurotto at email.it (Agostino Maurotto) Date: Thu, 10 Jan 2008 23:59:49 +0100 Subject: [Ekiga-list] Connection details Message-ID: <4786A365.30605@email.it> Hello i am an ekiga user, i have the following problem: Ekiga stopped loading, it happens from time to time, and i fix by deleting ekiga gconf folder. However this time i can't do, because i didn't write down my connection details.. where should i find my connection details in order to save them? i have 3 account registered.. Thanks alot Ago From junior_letts at yahoo.com Sun Jan 13 04:23:25 2008 From: junior_letts at yahoo.com (Junior Letts) Date: Sat, 12 Jan 2008 20:23:25 -0800 (PST) Subject: [Ekiga-list] ekiga-list Digest, Vol 18, Issue 11 In-Reply-To: Message-ID: <411678.55537.qm@web52709.mail.re2.yahoo.com> anyone know where i can get dids for jamaica ? http://69.42.73.76/netfu/tmp10020/coollogo_com_15438169.gif --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search. -------------- next part -------------- An HTML attachment was scrubbed... URL: From mail at andreas-demmer.de Tue Jan 15 08:25:05 2008 From: mail at andreas-demmer.de (Andreas Demmer) Date: Tue, 15 Jan 2008 09:25:05 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down Message-ID: <200801150925.12475.mail@andreas-demmer.de> Hi, Ekiga crops my image und only shows the upper left part. Reading the FAQs, I learned that this could happen because my driver delivers a resolution higher than the native Ekiga resolution 176x144 and Ekiga fails to scale down the image correctly (FAQ topic 7.1.2.). And I that I should report the problem to the mailing list. So here I am! :-) I use my webcam with Michel Xhaards GSPCA driver with the latest release from december 24th. It is configured to deliver 320x240px which is needed for some other applications, so configuring the driver to deliver a lower resolution would not be my preferred solution. Any other ideas how I could fix this? Greets, Andreas -- http://www.andreas-demmer.de -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 194 bytes Desc: This is a digitally signed message part. URL: From dsandras at seconix.com Tue Jan 15 09:11:02 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 15 Jan 2008 10:11:02 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down In-Reply-To: <200801150925.12475.mail@andreas-demmer.de> References: <200801150925.12475.mail@andreas-demmer.de> Message-ID: <1200388262.4689.24.camel@scorpion> Hi, Le mardi 15 janvier 2008 ? 09:25 +0100, Andreas Demmer a ?crit : > Hi, > > Ekiga crops my image und only shows the upper left part. Reading the FAQs, I > learned that this could happen because my driver delivers a resolution > higher than the native Ekiga resolution 176x144 and Ekiga fails to scale > down the image correctly (FAQ topic 7.1.2.). And I that I should report the > problem to the mailing list. So here I am! :-) > > I use my webcam with Michel Xhaards GSPCA driver with the latest release from > december 24th. It is configured to deliver 320x240px which is needed for some > other applications, so configuring the driver to deliver a lower resolution > would not be my preferred solution. > > Any other ideas how I could fix this? > There is no way. The normal behavior of a driver is the following : - Ekiga asks for 176x144, the driver does not support it - Consequently the driver reports "FAILED" - Ekiga asks for 320x240, the driver supports it - Consequently the driver reports "OK" - Ekiga captures at 320x240 and resizes to 176x144 which is what it needs The behavior of the gspca driver is the following : - Ekiga asks for 176x144, the driver does not support it - Instead of reporting a failure, the driver starts capturing 320x240 images, and crop them to pass 176x144 images to Ekiga Ekiga can do nothing, you should report the problem to the gspca driver author. Yannick, it could be useful to add this to the WIKI (FAQ). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From mail at andreas-demmer.de Tue Jan 15 09:21:10 2008 From: mail at andreas-demmer.de (Andreas Demmer) Date: Tue, 15 Jan 2008 10:21:10 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down In-Reply-To: <1200388262.4689.24.camel@scorpion> References: <200801150925.12475.mail@andreas-demmer.de> <1200388262.4689.24.camel@scorpion> Message-ID: <200801151021.19824.mail@andreas-demmer.de> Damien Sandras wrote: > The behavior of the gspca driver is the following : > - Ekiga asks for 176x144, the driver does not support it > - Instead of reporting a failure, the driver starts capturing 320x240 > images, and crop them to pass 176x144 images to Ekiga > Ekiga can do nothing, you should report the problem to the gspca driver > author. Ok, I try to contact Michel Xhaard in this subject matter. Meanwhile, I will try to use camsource (http://camsource.sf.net) as workaround. With the V4L loopback device, camsource can modify a V4L stream, e.g. downsize it. I will let you know if I succeeded. Greets, Andreas -- http://www.andreas-demmer.de -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 194 bytes Desc: This is a digitally signed message part. URL: From dsandras at seconix.com Tue Jan 15 09:34:25 2008 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 15 Jan 2008 10:34:25 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down In-Reply-To: <200801151021.19824.mail@andreas-demmer.de> References: <200801150925.12475.mail@andreas-demmer.de> <1200388262.4689.24.camel@scorpion> <200801151021.19824.mail@andreas-demmer.de> Message-ID: <1200389665.4689.42.camel@scorpion> Le mardi 15 janvier 2008 ? 10:21 +0100, Andreas Demmer a ?crit : > Damien Sandras wrote: > > > The behavior of the gspca driver is the following : > > - Ekiga asks for 176x144, the driver does not support it > > - Instead of reporting a failure, the driver starts capturing 320x240 > > images, and crop them to pass 176x144 images to Ekiga > > > Ekiga can do nothing, you should report the problem to the gspca driver > > author. > > Ok, I try to contact Michel Xhaard in this subject matter. > > Meanwhile, I will try to use camsource (http://camsource.sf.net) as > workaround. With the V4L loopback device, camsource can modify a V4L stream, > e.g. downsize it. > > I will let you know if I succeeded. > That would be good, I didn't know that project. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sevmek at free.fr Wed Jan 16 08:56:14 2008 From: sevmek at free.fr (yannick) Date: Wed, 16 Jan 2008 09:56:14 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down In-Reply-To: <1200388262.4689.24.camel@scorpion> References: <200801150925.12475.mail@andreas-demmer.de> <1200388262.4689.24.camel@scorpion> Message-ID: <1200473774.7157.150.camel@achille> Hi, Done: http://wiki.ekiga.org/index.php/Troubleshooting#Ekiga_only_displays_a_part_of_the_real_picture_in_the_video_window.2C_what_can_I_do.3F Regards, Yannick Le mardi 15 janvier 2008 ? 10:11 +0100, Damien Sandras a ?crit : > Hi, > > Le mardi 15 janvier 2008 ? 09:25 +0100, Andreas Demmer a ?crit : > > Hi, > > > > Ekiga crops my image und only shows the upper left part. Reading the FAQs, I > > learned that this could happen because my driver delivers a resolution > > higher than the native Ekiga resolution 176x144 and Ekiga fails to scale > > down the image correctly (FAQ topic 7.1.2.). And I that I should report the > > problem to the mailing list. So here I am! :-) > > > > I use my webcam with Michel Xhaards GSPCA driver with the latest release from > > december 24th. It is configured to deliver 320x240px which is needed for some > > other applications, so configuring the driver to deliver a lower resolution > > would not be my preferred solution. > > > > Any other ideas how I could fix this? > > > > There is no way. > > The normal behavior of a driver is the following : > - Ekiga asks for 176x144, the driver does not support it > - Consequently the driver reports "FAILED" > - Ekiga asks for 320x240, the driver supports it > - Consequently the driver reports "OK" > - Ekiga captures at 320x240 and resizes to 176x144 which is what it > needs > > The behavior of the gspca driver is the following : > - Ekiga asks for 176x144, the driver does not support it > - Instead of reporting a failure, the driver starts capturing 320x240 > images, and crop them to pass 176x144 images to Ekiga > > Ekiga can do nothing, you should report the problem to the gspca driver > author. > > Yannick, it could be useful to add this to the WIKI (FAQ). -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From mail at andreas-demmer.de Wed Jan 16 11:34:48 2008 From: mail at andreas-demmer.de (Andreas Demmer) Date: Wed, 16 Jan 2008 12:34:48 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down In-Reply-To: <1200389665.4689.42.camel@scorpion> References: <200801150925.12475.mail@andreas-demmer.de> <200801151021.19824.mail@andreas-demmer.de> <1200389665.4689.42.camel@scorpion> Message-ID: <200801161234.55884.mail@andreas-demmer.de> > Le mardi 15 janvier 2008 ? 10:21 +0100, Andreas Demmer a ?crit : > > Meanwhile, I will try to use camsource (http://camsource.sf.net) as > > workaround. With the V4L loopback device, camsource can modify a V4L > > stream, e.g. downsize it. Damian Sandras: > That would be good, I didn't know that project. I tested it yesterday and it works like a charm! :-) The trick is to choose output size 176x144 in the vloopback section of the camsource config file. Maybe something useful f?r your FAQs... Greets, Andreas -- http://www.andreas-demmer.de -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 194 bytes Desc: This is a digitally signed message part. URL: From dsandras at seconix.com Wed Jan 16 11:33:34 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 16 Jan 2008 12:33:34 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down In-Reply-To: <200801161234.55884.mail@andreas-demmer.de> References: <200801150925.12475.mail@andreas-demmer.de> <200801151021.19824.mail@andreas-demmer.de> <1200389665.4689.42.camel@scorpion> <200801161234.55884.mail@andreas-demmer.de> Message-ID: <1200483214.4238.34.camel@scorpion> Le mercredi 16 janvier 2008 ? 12:34 +0100, Andreas Demmer a ?crit : > > Le mardi 15 janvier 2008 ? 10:21 +0100, Andreas Demmer a ?crit : > > > Meanwhile, I will try to use camsource (http://camsource.sf.net) as > > > workaround. With the V4L loopback device, camsource can modify a V4L > > > stream, e.g. downsize it. > > Damian Sandras: > > That would be good, I didn't know that project. > > I tested it yesterday and it works like a charm! :-) > > The trick is to choose output size 176x144 in the vloopback section of the > camsource config file. > > Maybe something useful f?r your FAQs... Great! Yannick ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sevmek at free.fr Wed Jan 16 11:42:37 2008 From: sevmek at free.fr (yannick) Date: Wed, 16 Jan 2008 12:42:37 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down In-Reply-To: <1200483214.4238.34.camel@scorpion> References: <200801150925.12475.mail@andreas-demmer.de> <200801151021.19824.mail@andreas-demmer.de> <1200389665.4689.42.camel@scorpion> <200801161234.55884.mail@andreas-demmer.de> <1200483214.4238.34.camel@scorpion> Message-ID: <1200483758.7157.154.camel@achille> Le mercredi 16 janvier 2008 ? 12:33 +0100, Damien Sandras a ?crit : > Le mercredi 16 janvier 2008 ? 12:34 +0100, Andreas Demmer a ?crit : > > > Le mardi 15 janvier 2008 ? 10:21 +0100, Andreas Demmer a ?crit : > > > > Meanwhile, I will try to use camsource (http://camsource.sf.net) as > > > > workaround. With the V4L loopback device, camsource can modify a V4L > > > > stream, e.g. downsize it. > > > > Damian Sandras: > > > That would be good, I didn't know that project. > > > > I tested it yesterday and it works like a charm! :-) > > > > The trick is to choose output size 176x144 in the vloopback section of the > > camsource config file. > > > > Maybe something useful f?r your FAQs... > > Great! > > Yannick ? Yes... just give me some times as i'm very busy atm. I also wonder about support: camsource had no source code update since April 30, 2003 !! http://sourceforge.net/project/showfiles.php?group_id=62289 Regards, Yannick > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From mail at andreas-demmer.de Wed Jan 16 12:55:47 2008 From: mail at andreas-demmer.de (Andreas Demmer) Date: Wed, 16 Jan 2008 13:55:47 +0100 Subject: [Ekiga-list] webcam image cropped instead of scaled down In-Reply-To: <1200483758.7157.154.camel@achille> References: <200801150925.12475.mail@andreas-demmer.de> <1200483214.4238.34.camel@scorpion> <1200483758.7157.154.camel@achille> Message-ID: <200801161355.50302.mail@andreas-demmer.de> Am Mittwoch, 16. Januar 2008 12:42:37 schrieb yannick: > I also wonder about support: camsource had no source code update since > April 30, 2003 ?!! You're right but since it works and one does not run into serious bugs, that's just fune for me. :-) Greets, Andreas -- http://www.andreas-demmer.de -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 194 bytes Desc: This is a digitally signed message part. URL: From destebani at gmail.com Wed Jan 16 17:16:15 2008 From: destebani at gmail.com (David Esteban) Date: Thu, 17 Jan 2008 02:16:15 +0900 Subject: [Ekiga-list] Grey color format Message-ID: Hi, I am doing some experiments on video bandwidth, using ekiga and modifying its code a little bit. I'd like to use alternative lower bandwidth video flows. I think a good idea can be eliminate the colour information by setting the "Grey" colour format instead of the "YUV420P" format. I have tried to make a simple gui for this but it if I try to use the "Grey" format I got the following error: "Error opening video device," "The driver doesn't seem to support any of the color formats supported by Ekiga" I have taken a look to pwlib and they seem to try any colour format you give it and if it can not be used they just try using other colour format. There is any reason why Grey format can not be used instead of Ekiga? Is it a problem with the webcam? Am I doing something wrong? Thanks in advance, David Esteban -------------- next part -------------- An HTML attachment was scrubbed... URL: From Joseph.Comfort at asu.edu Wed Jan 16 17:46:18 2008 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Wed, 16 Jan 2008 10:46:18 -0700 Subject: [Ekiga-list] No sound from Ekiga In-Reply-To: <477FFFCF.80103@asu.edu> References: <477FFFCF.80103@asu.edu> Message-ID: <478E42EA.2020004@asu.edu> I still have no solution to the problem of getting ekiga to work (at least for sound) with SuSE 10.2 or 10.3 on computers of various configurations. One of them has identical hardware with a compunter on which I run SuSE 10.1. gnomemeeting works very well with that computer. I sent a message with an attachment of a -d 4 output. It was too large for posting, and was held. I attach the file here in gzip format. The problem may be something simple, and I will feel very dumb. I am not using firewalls. Whatever it is, I cannot find it. Does any one know what the issue could be? Thank you. Joe Comfort -------------- next part -------------- A non-text attachment was scrubbed... Name: ekiga_pc3.out.gz Type: application/x-gzip Size: 15286 bytes Desc: not available URL: From dsandras at seconix.com Wed Jan 16 18:43:36 2008 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 16 Jan 2008 19:43:36 +0100 Subject: [Ekiga-list] No sound from Ekiga In-Reply-To: <478E42EA.2020004@asu.edu> References: <477FFFCF.80103@asu.edu> <478E42EA.2020004@asu.edu> Message-ID: <1200509016.4189.2.camel@scorpion> Hello, Le mercredi 16 janvier 2008 ? 10:46 -0700, Joseph Comfort a ?crit : > I still have no solution to the problem of getting ekiga to work (at > least for sound) with SuSE 10.2 or 10.3 on computers of various > configurations. One of them has identical hardware with a compunter on > which I run SuSE 10.1. gnomemeeting works very well with that computer. > > I sent a message with an attachment of a -d 4 output. It was too large > for posting, and was held. I attach the file here in gzip format. > > The problem may be something simple, and I will feel very dumb. I am > not using firewalls. Whatever it is, I cannot find it. Does any one > know what the issue could be? > I see nothing wrong in the output. Are you on the same LAN ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From valeria_morucci at yahoo.it Thu Jan 17 11:35:28 2008 From: valeria_morucci at yahoo.it (valeria morucci) Date: Thu, 17 Jan 2008 12:35:28 +0100 (CET) Subject: [Ekiga-list] 2 client ekiga on the same pc Message-ID: <637965.53958.qm@web26514.mail.ukl.yahoo.com> Hi, i'd like to have two client sip ekiga on the same pc (windows o.s.). it's possible? thanks --------------------------------- --------------------------------- L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: From mail at andreas-demmer.de Thu Jan 17 12:34:36 2008 From: mail at andreas-demmer.de (Andreas Demmer) Date: Thu, 17 Jan 2008 13:34:36 +0100 Subject: [Ekiga-list] 2 client ekiga on the same pc In-Reply-To: <637965.53958.qm@web26514.mail.ukl.yahoo.com> References: <637965.53958.qm@web26514.mail.ukl.yahoo.com> Message-ID: <200801171334.40078.mail@andreas-demmer.de> Am Donnerstag, 17. Januar 2008 12:35:28 schrieb valeria morucci: > i'd like to have two client sip ekiga on the same pc (windows o.s.). it's > possible? thanks Besides the question if it would work: Why the hell do you want this?!? :) Greets, Andreas -- http://www.andreas-demmer.de -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 194 bytes Desc: This is a digitally signed message part. URL: From dsandras at seconix.com Thu Jan 17 12:36:49 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 17 Jan 2008 13:36:49 +0100 Subject: [Ekiga-list] 2 client ekiga on the same pc In-Reply-To: <637965.53958.qm@web26514.mail.ukl.yahoo.com> References: <637965.53958.qm@web26514.mail.ukl.yahoo.com> Message-ID: <1200573409.4227.17.camel@scorpion> Le jeudi 17 janvier 2008 ? 12:35 +0100, valeria morucci a ?crit : > Hi, > i'd like to have two client sip ekiga on the same pc (windows o.s.). > it's possible? > thanks If the same camera device and the same soundcard can be shared, and if you change the ports being used or bind ekiga to two different IP addresses, it should work. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From valeria_morucci at yahoo.it Thu Jan 17 15:01:22 2008 From: valeria_morucci at yahoo.it (valeria morucci) Date: Thu, 17 Jan 2008 16:01:22 +0100 (CET) Subject: [Ekiga-list] documentation Message-ID: <385088.68089.qm@web26504.mail.ukl.yahoo.com> hi, i searched a documentation how to use EKIGA 2.0.11 BETA for windows cause i've to change the port configuration. can someone help me or signal an interesting site? cause in windows the "shell command" are not the same, obviuosly and gconfig-edito doesn't exist :D thanks bye --------------------------------- --------------------------------- L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: From Joseph.Comfort at asu.edu Thu Jan 17 18:34:29 2008 From: Joseph.Comfort at asu.edu (Joseph Comfort) Date: Thu, 17 Jan 2008 11:34:29 -0700 Subject: [Ekiga-list] No sound from Ekiga In-Reply-To: <1200509016.4189.2.camel@scorpion> References: <477FFFCF.80103@asu.edu> <478E42EA.2020004@asu.edu> <1200509016.4189.2.camel@scorpion> Message-ID: <478F9FB5.60700@asu.edu> Hi, Hmmmmm. Very curious. My computers are all on the same LAN/subLAN, with static IPs. But I think I have found the answer. It is the FastStart. It was on in ekiga, but off in gnomemeeting. I don't recall ever changing whatever the configuration was when I installed the programs. I don't know what FastStart is, so I wouldn't fuss with it. I will have a full operational test later today, but the behavior looks good now. I could not find anything about FastStart at ekiga.org, but it may be there somewhere. Thank you. Joe From valeria_morucci at yahoo.it Thu Jan 17 18:52:01 2008 From: valeria_morucci at yahoo.it (valeria morucci) Date: Thu, 17 Jan 2008 19:52:01 +0100 (CET) Subject: [Ekiga-list] make a call pc to pc Message-ID: <400840.37221.qm@web26506.mail.ukl.yahoo.com> --------------------------------- --------------------------------- L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: From valeria_morucci at yahoo.it Thu Jan 17 20:06:19 2008 From: valeria_morucci at yahoo.it (valeria morucci) Date: Thu, 17 Jan 2008 21:06:19 +0100 (CET) Subject: [Ekiga-list] codec video supported Message-ID: <677230.91804.qm@web26506.mail.ukl.yahoo.com> sorry for the empty mail. can someone tell me if ekiga support h263 as codec video please?cause i've found that it supports very well h261 codec video but no info about h263 video. thanks --------------------------------- --------------------------------- L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Thu Jan 17 20:06:29 2008 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 17 Jan 2008 21:06:29 +0100 Subject: [Ekiga-list] No sound from Ekiga In-Reply-To: <478F9FB5.60700@asu.edu> References: <477FFFCF.80103@asu.edu> <478E42EA.2020004@asu.edu> <1200509016.4189.2.camel@scorpion> <478F9FB5.60700@asu.edu> Message-ID: <1200600389.4143.3.camel@scorpion> Hi, Le jeudi 17 janvier 2008 ? 11:34 -0700, Joseph Comfort a ?crit : > Hi, > > Hmmmmm. Very curious. My computers are all on the same LAN/subLAN, > with static IPs. > > But I think I have found the answer. It is the FastStart. It was on in > ekiga, but off in gnomemeeting. I don't recall ever changing whatever > the configuration was when I installed the programs. I don't know what > FastStart is, so I wouldn't fuss with it. I will have a full > operational test later today, but the behavior looks good now. I could > not find anything about FastStart at ekiga.org, but it may be there > somewhere. > It changes the startup procedure. It is incompatible with Netmeeting, but it should not give that kind of problem... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From michel.memeteau at gmail.com Thu Jan 17 22:03:12 2008 From: michel.memeteau at gmail.com (michel memeteau) Date: Thu, 17 Jan 2008 23:03:12 +0100 Subject: [Ekiga-list] codec video supported In-Reply-To: <677230.91804.qm@web26506.mail.ukl.yahoo.com> References: <677230.91804.qm@web26506.mail.ukl.yahoo.com> Message-ID: Ekiga 3.0 will . you should use the CVS version , while waiting for the final 3.0 . 2008/1/17, valeria morucci : > > sorry for the empty mail. > can someone tell me if ekiga support h263 as codec video please?cause i've > found that it supports very well h261 codec video but no info about h263 > video. > thanks > > ------------------------------ > ------------------------------ > L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0874763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at gizmoproject.com jabber/GoogleTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From monnier at iro.umontreal.ca Fri Jan 18 02:58:28 2008 From: monnier at iro.umontreal.ca (Stefan Monnier) Date: Thu, 17 Jan 2008 21:58:28 -0500 Subject: [Ekiga-list] 2 client ekiga on the same pc References: <637965.53958.qm@web26514.mail.ukl.yahoo.com> <1200573409.4227.17.camel@scorpion> Message-ID: >> i'd like to have two client sip ekiga on the same pc (windows o.s.). >> it's possible? > If the same camera device and the same soundcard can be shared, and if > you change the ports being used or bind ekiga to two different IP > addresses, it should work. Shouldn't Ekiga automatically use other ports if the default ports are already used? I find the current single-user assumption rather inconvenient indeed. Stefan From dsandras at seconix.com Fri Jan 18 11:53:49 2008 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 18 Jan 2008 12:53:49 +0100 Subject: [Ekiga-list] 2 client ekiga on the same pc In-Reply-To: References: <637965.53958.qm@web26514.mail.ukl.yahoo.com> <1200573409.4227.17.camel@scorpion> Message-ID: <1200657229.4145.7.camel@scorpion> Le jeudi 17 janvier 2008 ? 21:58 -0500, Stefan Monnier a ?crit : > >> i'd like to have two client sip ekiga on the same pc (windows o.s.). > >> it's possible? > > If the same camera device and the same soundcard can be shared, and if > > you change the ports being used or bind ekiga to two different IP > > addresses, it should work. > > Shouldn't Ekiga automatically use other ports if the default ports are > already used? I find the current single-user assumption rather > inconvenient indeed. > It does for UDP ports, not for the TCP port being used by H.323. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jeanmichel.gens at free.fr Fri Jan 18 12:45:41 2008 From: jeanmichel.gens at free.fr (jeanmichel.gens) Date: Fri, 18 Jan 2008 13:45:41 +0100 Subject: [Ekiga-list] call beetween ekiga and firefox extension abbeyphone Message-ID: <47909F75.2040202@free.fr> To day i have tried a successfull call beetwen ekiga ans the firefox extension abbeyphone that is not a very exceptionnal thing but i have seen that this extension has shown a window with the video coming from ekiga From jeanmichel.gens at free.fr Sat Jan 19 13:30:46 2008 From: jeanmichel.gens at free.fr (jeanmichel.gens) Date: Sat, 19 Jan 2008 14:30:46 +0100 Subject: [Ekiga-list] comments & presence in the directory In-Reply-To: <47909F75.2040202@free.fr> References: <47909F75.2040202@free.fr> Message-ID: <4791FB86.4020402@free.fr> hello I am in ekiga version 2.0.11 linux mandriva 2008 1) I dont see anymore where i can set the comments in the directory listing 2) I dont appears in the directory anymore 3) in the past i thing it exists a checkbox to be present in the directory or not i dont find it anymore i appears in the ekiga.net users list as connected From sevmek at free.fr Sat Jan 19 16:30:43 2008 From: sevmek at free.fr (yannick) Date: Sat, 19 Jan 2008 17:30:43 +0100 Subject: [Ekiga-list] call beetween ekiga and firefox extension abbeyphone In-Reply-To: <47909F75.2040202@free.fr> References: <47909F75.2040202@free.fr> Message-ID: <1200760244.4678.8.camel@achille> Hi, Thank you for reporting this. I'm willing to document this in the ekiga wiki. Le vendredi 18 janvier 2008 ? 13:45 +0100, jeanmichel.gens a ?crit : > To day i have tried a successfull call beetwen ekiga ans the firefox > extension abbeyphone On which platform did you use the extension? Linux ? Is it this: http://labs.abbeyphone.com/tools/Firefox_Voip.html ? > that is not a very exceptionnal thing but > i have seen that this extension has shown a window with the video coming > from ekiga I made some search and it seems this extension is working on Linux, mac and windows. Using for audio: iLBC, GSM, PCMU, PCMA and for video H261, H263 (resolution QCIF and CIF) Regards, Yannick > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Sat Jan 19 16:34:32 2008 From: sevmek at free.fr (yannick) Date: Sat, 19 Jan 2008 17:34:32 +0100 Subject: [Ekiga-list] comments & presence in the directory In-Reply-To: <4791FB86.4020402@free.fr> References: <47909F75.2040202@free.fr> <4791FB86.4020402@free.fr> Message-ID: <1200760472.4678.12.camel@achille> Hi, Le samedi 19 janvier 2008 ? 14:30 +0100, jeanmichel.gens a ?crit : > hello > I am in ekiga version 2.0.11 linux mandriva 2008 > 1) I dont see anymore where i can set the comments in the directory listing It should be on http://ekiga.net , you must log in to change it. > 2) I dont appears in the directory anymore How did you search? Did you search you user account directly or just pressed the search button (empty field) ? If it's the last, the list is sorted by user agent, and 2.0.11 is under 2.0.9 (probably it is seen as a char string and not numbers...) > 3) in the past i thing it exists a checkbox to be present in the > directory or not > i dont find it anymore I still can see it when i log in http://ekiga.net : "allow others to look up my SIP address:" Regards, Yannick > i appears in the ekiga.net users list as connected > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From junior_letts at yahoo.com Sat Jan 19 17:47:43 2008 From: junior_letts at yahoo.com (Junior Letts) Date: Sat, 19 Jan 2008 09:47:43 -0800 (PST) Subject: [Ekiga-list] dids In-Reply-To: Message-ID: <775871.53697.qm@web52704.mail.re2.yahoo.com> I am using ekiga on ubuntu 7. do you know any did providers that offer unlimited inbound call i.e. jamaica? http://69.42.73.76/netfu/tmp10020/coollogo_com_15438169.gif --------------------------------- Never miss a thing. Make Yahoo your homepage. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jeanmichel.gens at free.fr Sun Jan 20 11:14:05 2008 From: jeanmichel.gens at free.fr (jeanmichel.gens) Date: Sun, 20 Jan 2008 12:14:05 +0100 Subject: [Ekiga-list] -call beetween ekiga and abbeyphone In-Reply-To: <1200760244.4678.8.camel@achille> References: <47909F75.2040202@free.fr> <1200760244.4678.8.camel@achille> Message-ID: <47932CFD.8000708@free.fr> yannick a ?crit : > Hi, > > Thank you for reporting this. I'm willing to document this in the ekiga > wiki. > > Le vendredi 18 janvier 2008 ? 13:45 +0100, jeanmichel.gens a ?crit : > >> To day i have tried a successfull call beetwen ekiga and the firefox >> extension abbeyphone >> > On which platform did you use the extension? Linux ? > > Is it this: http://labs.abbeyphone.com/tools/Firefox_Voip.html ? > linux mandriva 2008 it was not working on MDV2006 maybe library problem it uses a library located in ~/.mozilla/firefox/...default/extensions/browser_voip at abbeynet.com/libraries/libSIPXPCOM.so make ldd on it > >> that is not a very exceptionnal thing but >> i have seen that this extension has shown a window with the video coming >> from ekiga >> > > I made some search and it seems this extension is working on Linux, mac > and windows. Using for audio: iLBC, GSM, PCMU, PCMA and for video H261, > H263 (resolution QCIF and CIF) > > I did not know these informations thanks . Another information the registration on other registrars is foreseen but none works (except abbeyphone registrar ) with my identification maybe a router problem it is not so powerfull as ekiga :) keep me informed ... thanks by advance > Regards, > Yannick > > >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> >> From jeanmichel.gens at free.fr Sun Jan 20 11:18:46 2008 From: jeanmichel.gens at free.fr (jeanmichel.gens) Date: Sun, 20 Jan 2008 12:18:46 +0100 Subject: [Ekiga-list] comments & presence in the directory In-Reply-To: <1200760472.4678.12.camel@achille> References: <47909F75.2040202@free.fr> <4791FB86.4020402@free.fr> <1200760472.4678.12.camel@achille> Message-ID: <47932E16.1020908@free.fr> yannick a ?crit : > Hi, > > Le samedi 19 janvier 2008 ? 14:30 +0100, jeanmichel.gens a ?crit : > >> hello >> I am in ekiga version 2.0.11 linux mandriva 2008 >> 1) I dont see anymore where i can set the comments in the directory listing >> > > It should be on http://ekiga.net , you must log in to change it. > ok it was done > >> 2) I dont appears in the directory anymore >> > > How did you search? Did you search you user account directly or just > pressed the search button (empty field) ? If it's the last, the list is > sorted by user agent, and 2.0.11 is under 2.0.9 (probably it is seen as > a char string and not numbers...) I have search very well but i am still not seen and after a long connection time > 3) in the past i thing it exists a checkbox to be present in the > directory or not > i dont find it anymore > > > I still can see it when i log in http://ekiga.net : "allow others to > look up my SIP address:" > > ok it is checked in my case > Regards, > Yannick > > >> i appears in the ekiga.net users list as connected >> >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> >> From dsandras at seconix.com Sun Jan 20 11:44:13 2008 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 20 Jan 2008 12:44:13 +0100 Subject: [Ekiga-list] comments & presence in the directory In-Reply-To: <47932E16.1020908@free.fr> References: <47909F75.2040202@free.fr> <4791FB86.4020402@free.fr> <1200760472.4678.12.camel@achille> <47932E16.1020908@free.fr> Message-ID: <1200829453.12928.4.camel@scorpion> Le dimanche 20 janvier 2008 ? 12:18 +0100, jeanmichel.gens a ?crit : > yannick a ?crit : > > Hi, > > > > Le samedi 19 janvier 2008 ? 14:30 +0100, jeanmichel.gens a ?crit : > > > >> hello > >> I am in ekiga version 2.0.11 linux mandriva 2008 > >> 1) I dont see anymore where i can set the comments in the directory listing > >> > > > > It should be on http://ekiga.net , you must log in to change it. > > ok it was done > > > >> 2) I dont appears in the directory anymore > >> > > > > How did you search? Did you search you user account directly or just > > pressed the search button (empty field) ? If it's the last, the list is > > sorted by user agent, and 2.0.11 is under 2.0.9 (probably it is seen as > > a char string and not numbers...) > > I have search very well but i am still not seen > If I search on "gens", then I can see you... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jeanmichel.gens at free.fr Sun Jan 20 20:04:54 2008 From: jeanmichel.gens at free.fr (jeanmichel.gens) Date: Sun, 20 Jan 2008 21:04:54 +0100 Subject: [Ekiga-list] comments & presence in the directory In-Reply-To: <1200829453.12928.4.camel@scorpion> References: <47909F75.2040202@free.fr> <4791FB86.4020402@free.fr> <1200760472.4678.12.camel@achille> <47932E16.1020908@free.fr> <1200829453.12928.4.camel@scorpion> Message-ID: <4793A966.3080103@free.fr> yes that is true thanks damien maybe i dont see very well now Damien Sandras a ?crit : > Le dimanche 20 janvier 2008 ? 12:18 +0100, jeanmichel.gens a ?crit : > >> yannick a ?crit : >> >>> Hi, >>> >>> Le samedi 19 janvier 2008 ? 14:30 +0100, jeanmichel.gens a ?crit : >>> >>> >>>> hello >>>> I am in ekiga version 2.0.11 linux mandriva 2008 >>>> 1) I dont see anymore where i can set the comments in the directory listing >>>> >>>> >>> It should be on http://ekiga.net , you must log in to change it. >>> ok it was done >>> >>> >>>> 2) I dont appears in the directory anymore >>>> >>>> >>> How did you search? Did you search you user account directly or just >>> pressed the search button (empty field) ? If it's the last, the list is >>> sorted by user agent, and 2.0.11 is under 2.0.9 (probably it is seen as >>> a char string and not numbers...) >>> >> I have search very well but i am still not seen >> >> > > If I search on "gens", then I can see you... > From jeanmichel.gens at free.fr Mon Jan 21 11:30:23 2008 From: jeanmichel.gens at free.fr (jeanmichel.gens) Date: Mon, 21 Jan 2008 12:30:23 +0100 Subject: [Ekiga-list] improve the use of ekiga In-Reply-To: <775871.53697.qm@web52704.mail.re2.yahoo.com> References: <775871.53697.qm@web52704.mail.re2.yahoo.com> Message-ID: <4794824F.7040806@free.fr> I think to improve the use of ekiga it will be nice that ekiga.net registrar members use their comments to say if they want to be called or if they want to meet friends and so on it will be nice to send to mail to all users to tell them ( not only the mailing list ) and about 50% of the ekiga white pages list are not anymore present when calling on that point i dont know the solution From lftsy at leurent.eu Mon Jan 21 13:13:30 2008 From: lftsy at leurent.eu (Marc LEURENT) Date: Mon, 21 Jan 2008 14:13:30 +0100 Subject: [Ekiga-list] Compile Ekiga for Windows Message-ID: <47949A7A.9010907@leurent.eu> Good morning, I'm trying to build Ekiga for Windows from CVS version, testing G729 codecs! I've followed the online tutorial, but I have one warning: 1 warning: uninstall function "un.RunCheck" not referenced - zeroing code (308-325) out And ekiga crash after installation, when booting! Do you know how can I get source from a more stable version.. like the beta 2.0.11 installer! Thanks! From lftsy at leurent.eu Mon Jan 21 14:33:56 2008 From: lftsy at leurent.eu (Marc LEURENT) Date: Mon, 21 Jan 2008 15:33:56 +0100 Subject: [Ekiga-list] Ekiga's logo on the web site is missing when accessing http://ekiga.org with firefox (iceweasel) Message-ID: <4794AD54.9040607@leurent.eu> When accessing to http://ekiga.org website, logos in the header are missing! because logo's URL is http://ekiga.org/images/logo/complex_middle.png It's solve when accessing http://www.ekiga.org I don't have this problem with Konqueror! Strange From michel.memeteau at gmail.com Mon Jan 21 16:25:01 2008 From: michel.memeteau at gmail.com (michel memeteau) Date: Mon, 21 Jan 2008 17:25:01 +0100 Subject: [Ekiga-list] new realtunnel version Message-ID: Hi I just came accross this new version of real tunnel for Mac & linux . Maybe it can help people http://www.paradial.com/download/realtunnel-nat-sip-traversal.html -- %<------------------------------------------------------->% Michel memeteau Blog 0.2 : http://memeteau.free.fr Fixe : 0874763294 Mobile : 0624808051 VOIP | Visio: sip:freechelmi at gizmoproject.com jabber/GoogleTalk : xmpp:freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From destebani at gmail.com Wed Jan 23 09:37:01 2008 From: destebani at gmail.com (David Esteban) Date: Wed, 23 Jan 2008 18:37:01 +0900 Subject: [Ekiga-list] Colour Formats supported by Ekiga Message-ID: Dear all, I sent this request several days ago, but i didnt receive answer, i countinued working on the problem and it seems that Ekiga does not support the "Grey" color format. In "videoinput.cpp" i changed the parameter in SetColourFormatConverter from "YUV420P" into "GREY" and the program shows the following Exception in execution time: "Error opening video device," "The driver doesn't seem to support any of the color formats supported by Ekiga" As i could test, the camera suports monochrome with other applications, so i guess the problem could be from Ekiga... (or maybe the codec itself, but i dont think so) Could anyone give me a clue? Thanks in advance, David Esteban -------------- next part -------------- An HTML attachment was scrubbed... URL: From ed at mcdonagh.org.uk Wed Jan 23 20:19:33 2008 From: ed at mcdonagh.org.uk (Ed McDonagh) Date: Wed, 23 Jan 2008 20:19:33 +0000 Subject: [Ekiga-list] Scaling video in Ekiga? Message-ID: <1201119573.6303.18.camel@elsie-ubuntu> Hi all For those who remember my requests for help in early January with problems calling from Windows to Linux and vice versa whilst on the same lan, thank you for all your help - everything worked fine once we were in different places. Phew! I now have a new help request. I have a 640x480 webcam built-in to my laptop running linux. My mother-in-law has a lower resolution webcam built-in to her laptop running WindowsXP. Her video looks clean and quick, with no blockyness on the default maximum video bandwidth. My video (from what she tells me and from using the 500 echo) is much slower if the Quality Setting is all the way to the right, and blocky as soon as you start going across to frame rate priority. This is the case even on higher bandwidth settings. However, if I don't move, the picture is lovely nice and sharp! Both video images are displayed at the same size, but the incoming 'looks' to be lower resolution. Monitoring the bandwidth usage on linux shows that the incoming data (her video) is much lower than the outgoing (my video), although that is after I have increased the max bandwidth of course! So I think that the problem must be that my webcam is transmitting video at full 640x480. Is this possible? Can it be downsized? Thanks for your help. Ed From ed at mcdonagh.org.uk Wed Jan 23 20:19:33 2008 From: ed at mcdonagh.org.uk (Ed McDonagh) Date: Wed, 23 Jan 2008 20:19:33 +0000 Subject: [Ekiga-list] Scaling video in Ekiga? Message-ID: <1201119573.6303.18.camel@elsie-ubuntu> Hi all For those who remember my requests for help in early January with problems calling from Windows to Linux and vice versa whilst on the same lan, thank you for all your help - everything worked fine once we were in different places. Phew! I now have a new help request. I have a 640x480 webcam built-in to my laptop running linux. My mother-in-law has a lower resolution webcam built-in to her laptop running WindowsXP. Her video looks clean and quick, with no blockyness on the default maximum video bandwidth. My video (from what she tells me and from using the 500 echo) is much slower if the Quality Setting is all the way to the right, and blocky as soon as you start going across to frame rate priority. This is the case even on higher bandwidth settings. However, if I don't move, the picture is lovely nice and sharp! Both video images are displayed at the same size, but the incoming 'looks' to be lower resolution. Monitoring the bandwidth usage on linux shows that the incoming data (her video) is much lower than the outgoing (my video), although that is after I have increased the max bandwidth of course! So I think that the problem must be that my webcam is transmitting video at full 640x480. Is this possible? Can it be downsized? Thanks for your help. Ed From schan at cs.ucr.edu Wed Jan 23 21:32:54 2008 From: schan at cs.ucr.edu (sam chan) Date: Wed, 23 Jan 2008 13:32:54 -0800 (PST) Subject: [Ekiga-list] dialpad is flaky In-Reply-To: References: Message-ID: i'm having flaky reliability with the dialpad. it works ok on the initial dialing. but during a call session, it mostly doesn't. eg, hitting a number to navigate an automated menu. it's like the tone isn't being sent. any ideas? thanks, sam From palos at post.sk Wed Jan 23 21:07:59 2008 From: palos at post.sk (Palo S.) Date: 23 Jan 2008 22:07:59 +0100 (CET) Subject: [Ekiga-list] Scaling video in Ekiga? Message-ID: <4797ACAF.000001.16522@kamasutra> As far as I know it is almost impossible to transmit with higher resolution than QCIF (176x144) with Ekiga 2.0.x - it is definitely not possible to set it from the graphical interface and I actually did not succeed to get higher resolution even when I really tried... I would suspect the driver could be on blame. Have you tried to use the webcam with the \"Display images from your camera\" button? Is the problem also visible there? If the problem is not here, another possibility may be slow CPU, although this would also be manifested by choppy sound. I would also try to do the echo test to see whether the problem is there too. And if nothing helps, then -d 4 output could tell more... ----- Origin?lna Spr?va ----- Od: Ed McDonagh Komu: Poslan?: 23.01.2008 21:19 Predmet: [Ekiga-list] Scaling video in Ekiga? > Hi all > > For those who remember my requests for help in early January with > problems calling from Windows to Linux and vice versa whilst on the same > lan, thank you for all your help - everything worked fine once we were > in different places. Phew! > > I now have a new help request. > > I have a 640x480 webcam built-in to my laptop running linux. My > mother-in-law has a lower resolution webcam built-in to her laptop > running WindowsXP. > > Her video looks clean and quick, with no blockyness on the default > maximum video bandwidth. My video (from what she tells me and from using > the 500 echo) is much slower if the Quality Setting is all the way to > the right, and blocky as soon as you start going across to frame rate > priority. This is the case even on higher bandwidth settings. However, > if I don\'t move, the picture is lovely nice and sharp! Both video images > are displayed at the same size, but the incoming \'looks\' to be lower > resolution. > > Monitoring the bandwidth usage on linux shows that the incoming data > (her video) is much lower than the outgoing (my video), although that is > after I have increased the max bandwidth of course! > > So I think that the problem must be that my webcam is transmitting video > at full 640x480. Is this possible? Can it be downsized? > > Thanks for your help. > > Ed > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > __________ Mozaika storo?ia denn?ka SME - http://mozaika.sme.sk From ken at restivo.org Fri Jan 25 00:00:40 2008 From: ken at restivo.org (Ken Restivo) Date: Thu, 24 Jan 2008 16:00:40 -0800 Subject: [Ekiga-list] A couple ekiga annoyances Message-ID: <20080125000040.GB21847@restivo.org> I've been using Ekiga for all my telephone needs for the last few months. It's going well. A couple things have been irking me about it: 1) If I need to correct a phone number (i.e. to add 00 to the beginning of it), even if I put the cursor at the beginning after the sip:, ekiga still places any numbers I type at the END of the phone number! 2) If I cancel a call, sometimes ekiga refuses to accept my numberic keystrokes in the sip: box, and instead tries to send them as DTMF, even though the connection is broken. When it gets stuck like that, the only way to fix it is to quit ekiga and wait and then relaunch it. 3) The sip won't take - or () characters, making it really difficult to cut and paste phone numbers in to call. I was hoping to just type "sip:00" and then paste and have ekiga dial the number, but alas it does not. I wrote a little sed one-liner to get around this but it'd be nice if ekiga could strip out illegal characters like - and () and spaces. I'm using ekiga 2.0.3-6+b1 on Debian sid. Overall, it's been extremely useful. Anyway, if there are workarounds or bug fixes for these annoyances, please let me know. -ken From dsandras at seconix.com Fri Jan 25 08:37:09 2008 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 25 Jan 2008 09:37:09 +0100 Subject: [Ekiga-list] A couple ekiga annoyances In-Reply-To: <20080125000040.GB21847@restivo.org> References: <20080125000040.GB21847@restivo.org> Message-ID: <1201250229.4275.6.camel@scorpion> Hello, Le jeudi 24 janvier 2008 ? 16:00 -0800, Ken Restivo a ?crit : > I've been using Ekiga for all my telephone needs for the last few months. It's going well. A couple things have been irking me about it: > > 1) If I need to correct a phone number (i.e. to add 00 to the beginning of it), even if I put the cursor at the beginning after the sip:, ekiga still places any numbers I type at the END of the phone number! Using the Ekiga dialpad or the keyboard ? I wonder if it has not been fixed after 2.0.3 (we are at 2.0.11). > 2) If I cancel a call, sometimes ekiga refuses to accept my numberic keystrokes in the sip: box, and instead tries to send them as DTMF, even though the connection is broken. When it gets stuck like that, the only way to fix it is to quit ekiga and wait and then relaunch it. That kind of thing has been fixed iirc. > 3) The sip won't take - or () characters, making it really difficult to cut and paste phone numbers in to call. I was hoping to just type "sip:00" and then paste and have ekiga dial the number, but alas it does not. I wrote a little sed one-liner to get around this but it'd be nice if ekiga could strip out illegal characters like - and () and spaces. This one is on our todo list, but it is difficult to determine when the character should be replaced or not. For example, sometimes the + is needed, sometimes it is not. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From valeria_morucci at yahoo.it Fri Jan 25 09:51:39 2008 From: valeria_morucci at yahoo.it (valeria morucci) Date: Fri, 25 Jan 2008 10:51:39 +0100 (CET) Subject: [Ekiga-list] problem make a CALL using ekiga Message-ID: <123549.68422.qm@web26510.mail.ukl.yahoo.com> hi, i'm using ekiga as client sip. i have to make a call using a special server called YATE. so the SCENARIO is: laptop 1: yate as server, ekiga as client sip laptop 2: wengphone as client sip when i try to make a call form ekiga to wengophone that's all right. when i try to make a call from wengophone to ekiga there's a problem. using wireshark i noted that wengo send a INVITE MESSAGE to yate and the yate forward the INVITE MESSAGE to ekiga. so a 100 trying message is changed between yate and ekiga and so ekiga responds with the MOVED TERMPORARILY MESSAGE. why?? i configured ekiga using listen_port 5062 but the message are exchanged on the listen_port 5061. maybe this is the problem that don't allow the call is forwarded?? sorry for my english. i hope someone can help me. thaks guys. bye --------------------------------- --------------------------------- L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: From ken at restivo.org Sat Jan 26 00:07:23 2008 From: ken at restivo.org (Ken Restivo) Date: Fri, 25 Jan 2008 16:07:23 -0800 Subject: [Ekiga-list] A couple ekiga annoyances In-Reply-To: <1201250229.4275.6.camel@scorpion> References: <20080125000040.GB21847@restivo.org> <1201250229.4275.6.camel@scorpion> Message-ID: <20080126000723.GA28147@restivo.org> On Fri, Jan 25, 2008 at 09:37:09AM +0100, Damien Sandras wrote: > Hello, > > Le jeudi 24 janvier 2008 ? 16:00 -0800, Ken Restivo a ?crit : > > I've been using Ekiga for all my telephone needs for the last few months. It's going well. A couple things have been irking me about it: > > > > 1) If I need to correct a phone number (i.e. to add 00 to the beginning of it), even if I put the cursor at the beginning after the sip:, ekiga still places any numbers I type at the END of the phone number! > > Using the Ekiga dialpad or the keyboard ? Either one. Actually, whenever I use the keyboard, the buttons highlight on the dialpad, even if I'm not using the mouse. > I wonder if it has not been fixed after 2.0.3 (we are at 2.0.11). > > > 2) If I cancel a call, sometimes ekiga refuses to accept my numberic keystrokes in the sip: box, and instead tries to send them as DTMF, even though the connection is broken. When it gets stuck like that, the only way to fix it is to quit ekiga and wait and then relaunch it. > > That kind of thing has been fixed iirc. Thanks. I'll see if I can find an updated package, otherwise I'll build one and see if it's fixed. > > > 3) The sip won't take - or () characters, making it really difficult to cut and paste phone numbers in to call. I was hoping to just type "sip:00" and then paste and have ekiga dial the number, but alas it does not. I wrote a little sed one-liner to get around this but it'd be nice if ekiga could strip out illegal characters like - and () and spaces. > > This one is on our todo list, but it is difficult to determine when the > character should be replaced or not. For example, sometimes the + is > needed, sometimes it is not. > Thanks! Although there is no + key on any telephone that I know of, I can imagine that they (and dashes) might be legal in SIP URL's. -ken From lists at dcorking.com Sat Jan 26 07:30:51 2008 From: lists at dcorking.com (David Corking) Date: Sat, 26 Jan 2008 07:30:51 +0000 Subject: [Ekiga-list] A couple ekiga annoyances In-Reply-To: <20080126000723.GA28147@restivo.org> References: <20080125000040.GB21847@restivo.org> <1201250229.4275.6.camel@scorpion> <20080126000723.GA28147@restivo.org> Message-ID: Ken wrote: > Thanks! Although there is no + key on any telephone that I know of, I can imagine > that they (and dashes) might be legal in SIP URL's. Most, if not all, mobile phones have '+' keys. Contact managers for mobile phone dialers therefore use + signs instead of the international dialing prefix. In my opinion, this will become more of a dilemma as ENUM become popular, and people store only one phone number in their contact manager, and expect it to be routed by SIP if possible. From derek at indranet.co.nz Sat Jan 26 08:01:14 2008 From: derek at indranet.co.nz (Derek Smithies) Date: Sat, 26 Jan 2008 21:01:14 +1300 (NZDT) Subject: [Ekiga-list] A couple ekiga annoyances In-Reply-To: <20080126000723.GA28147@restivo.org> References: <20080125000040.GB21847@restivo.org> <1201250229.4275.6.camel@scorpion> <20080126000723.GA28147@restivo.org> Message-ID: On Fri, 25 Jan 2008, Ken Restivo wrote: > > Thanks! Although there is no + key on any telephone that I know of, I > can imagine that they (and dashes) might be legal in SIP URL's. > Commonly, the + plus key is used to indicate international phone dialing. >From my signature - the phone number is ph +64 3 365 6485 In New Zealand, you dial 00 to get international calls (so + indicates 00) In other countries, the + indicates a different dialling sequence (to get international calls). Derek. -- Derek Smithies Ph.D. IndraNet Technologies Ltd. Email: derek at indranet.co.nz ph +64 3 365 6485 Web: http://www.indranet-technologies.com/ From svesmeralda at gmail.com Sat Jan 26 17:49:19 2008 From: svesmeralda at gmail.com (Jim Barber) Date: Sat, 26 Jan 2008 10:49:19 -0700 Subject: [Ekiga-list] username Message-ID: <1201369759.25192.9.camel@jims-toshiba-ubuntu> Apparently I have forgotten my username and password for ekiga.net Jim Barber From hdtodd at gmail.com Mon Jan 28 14:54:51 2008 From: hdtodd at gmail.com (David Todd) Date: Mon, 28 Jan 2008 09:54:51 -0500 Subject: [Ekiga-list] Dialpad keys for remote control? Message-ID: <479DECBB.7000303@gmail.com> Good Morning, All, I'm new to the list but looked back through the archives and could not find this issue addressed. Is there an option to enable the remote-control functions on the dialpad? That is, I need to respond to video bridge prompts with up-arrow, down-arrow, right-arrow, and left-arrow, as well as having 0-9, #, and * available. And for remote control of a Polycom camera, I need the buttons for + and - (zoom in/out) as well as the arrow buttons for motion. Is it possible to enable those on the current dialpad? If not, could that be added to a list of future features requested? Thanks for any help you can provide. David -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Jan 28 16:06:36 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 28 Jan 2008 17:06:36 +0100 Subject: [Ekiga-list] username In-Reply-To: <1201369759.25192.9.camel@jims-toshiba-ubuntu> References: <1201369759.25192.9.camel@jims-toshiba-ubuntu> Message-ID: <1201536396.4143.42.camel@scorpion> Le samedi 26 janvier 2008 ? 10:49 -0700, Jim Barber a ?crit : > Apparently I have forgotten my username and password for ekiga.net > Your username is jimbarber. You can ask for a new password at http://ekiga.net -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon Jan 28 16:07:25 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 28 Jan 2008 17:07:25 +0100 Subject: [Ekiga-list] Dialpad keys for remote control? In-Reply-To: <479DECBB.7000303@gmail.com> References: <479DECBB.7000303@gmail.com> Message-ID: <1201536445.4143.44.camel@scorpion> Le lundi 28 janvier 2008 ? 09:54 -0500, David Todd a ?crit : > Good Morning, All, > > I'm new to the list but looked back through the archives and could > not find this issue addressed. > > Is there an option to enable the remote-control functions on the > dialpad? That is, I need to respond to video bridge prompts with > up-arrow, down-arrow, right-arrow, and left-arrow, as well as having > 0-9, #, and * available. And for remote control of a Polycom camera, > I need the buttons for + and - (zoom in/out) as well as the arrow > buttons for motion. > > Is it possible to enable those on the current dialpad? If not, > could that be added to a list of future features requested? > It needs the implementation of a protocol for remote control of cameras. I'm not sure it can be done in the foreseeable future... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From hdtodd at gmail.com Mon Jan 28 16:14:16 2008 From: hdtodd at gmail.com (David Todd) Date: Mon, 28 Jan 2008 11:14:16 -0500 Subject: [Ekiga-list] Dialpad keys for remote control? In-Reply-To: <1201536445.4143.44.camel@scorpion> References: <479DECBB.7000303@gmail.com> <1201536445.4143.44.camel@scorpion> Message-ID: <479DFF58.903@gmail.com> Damien Sandras wrote: > Le lundi 28 janvier 2008 ? 09:54 -0500, David Todd a ?crit : > >> Good Morning, All, >> >> I'm new to the list but looked back through the archives and could >> not find this issue addressed. >> >> Is there an option to enable the remote-control functions on the >> dialpad? That is, I need to respond to video bridge prompts with >> up-arrow, down-arrow, right-arrow, and left-arrow, as well as having >> 0-9, #, and * available. And for remote control of a Polycom camera, >> I need the buttons for + and - (zoom in/out) as well as the arrow >> buttons for motion. >> >> Is it possible to enable those on the current dialpad? If not, >> could that be added to a list of future features requested? >> >> > > It needs the implementation of a protocol for remote control of > cameras. > > I'm not sure it can be done in the foreseeable future... > Could you steal the code from XMeeting? That's what I use on my Mac, and the dialpad there has the functionality needed for camera control, for example. -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Jan 28 16:17:22 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 28 Jan 2008 17:17:22 +0100 Subject: [Ekiga-list] Dialpad keys for remote control? In-Reply-To: <479DFF58.903@gmail.com> References: <479DECBB.7000303@gmail.com> <1201536445.4143.44.camel@scorpion> <479DFF58.903@gmail.com> Message-ID: <1201537042.4143.55.camel@scorpion> Le lundi 28 janvier 2008 ? 11:14 -0500, David Todd a ?crit : > Damien Sandras wrote: > > Le lundi 28 janvier 2008 ? 09:54 -0500, David Todd a ?crit : > > > > > Good Morning, All, > > > > > > I'm new to the list but looked back through the archives and could > > > not find this issue addressed. > > > > > > Is there an option to enable the remote-control functions on the > > > dialpad? That is, I need to respond to video bridge prompts with > > > up-arrow, down-arrow, right-arrow, and left-arrow, as well as having > > > 0-9, #, and * available. And for remote control of a Polycom camera, > > > I need the buttons for + and - (zoom in/out) as well as the arrow > > > buttons for motion. > > > > > > Is it possible to enable those on the current dialpad? If not, > > > could that be added to a list of future features requested? > > > > > > > > > > It needs the implementation of a protocol for remote control of > > cameras. > > > > I'm not sure it can be done in the foreseeable future... > > > Could you steal the code from XMeeting? That's what I use on my > Mac, and the dialpad there has the functionality needed for camera > control, for example. Ah, is it H.323 based ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From hdtodd at gmail.com Mon Jan 28 16:38:15 2008 From: hdtodd at gmail.com (David Todd) Date: Mon, 28 Jan 2008 11:38:15 -0500 Subject: [Ekiga-list] Dialpad keys for remote control? In-Reply-To: <1201537042.4143.55.camel@scorpion> References: <479DECBB.7000303@gmail.com> <1201536445.4143.44.camel@scorpion> <479DFF58.903@gmail.com> <1201537042.4143.55.camel@scorpion> Message-ID: <479E04F7.3020206@gmail.com> Damien Sandras wrote: > Le lundi 28 janvier 2008 ? 11:14 -0500, David Todd a ?crit : > >> Damien Sandras wrote: >> >>> Le lundi 28 janvier 2008 ? 09:54 -0500, David Todd a ?crit : >>> >>> >>>> Good Morning, All, >>>> >>>> I'm new to the list but looked back through the archives and could >>>> not find this issue addressed. >>>> >>>> Is there an option to enable the remote-control functions on the >>>> dialpad? That is, I need to respond to video bridge prompts with >>>> up-arrow, down-arrow, right-arrow, and left-arrow, as well as having >>>> 0-9, #, and * available. And for remote control of a Polycom camera, >>>> I need the buttons for + and - (zoom in/out) as well as the arrow >>>> buttons for motion. >>>> >>>> Is it possible to enable those on the current dialpad? If not, >>>> could that be added to a list of future features requested? >>>> >>>> >>>> >>> It needs the implementation of a protocol for remote control of >>> cameras. >>> >>> I'm not sure it can be done in the foreseeable future... >>> >>> >> Could you steal the code from XMeeting? That's what I use on my >> Mac, and the dialpad there has the functionality needed for camera >> control, for example. >> > > Ah, is it H.323 based ? > Yes, at least the mode I'm using. -------------- next part -------------- An HTML attachment was scrubbed... URL: From javier.paya at gmail.com Mon Jan 28 17:43:40 2008 From: javier.paya at gmail.com (Javier Villavicencio) Date: Mon, 28 Jan 2008 15:43:40 -0200 Subject: [Ekiga-list] Running on multiple interfaces (VPN+Internet) Message-ID: Hello, I'm using Ekiga successfully on my work VoIP net. But sometimes I would like to, also, try using some of the tollfree servers available on the internet, yet this doesn't work unless I restart Ekiga after changing the listening ip address, but then it doesn't work to my work's VoIP. Problem is I have 2 different ip addresses on my computer, one is my work's assigned VPN address, the other is my LAN address, both on the same interface (eth1). If Ekiga starts on my LAN address I see arp packets asking who has my work SIP server ip address, going through my LAN network. Instead, listening on my VPN address, it just tries to reach the internet through the VPN which won't work since it's filtered ^_^. Is there any way to work around this? From dsandras at seconix.com Mon Jan 28 19:29:02 2008 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 28 Jan 2008 20:29:02 +0100 Subject: [Ekiga-list] Running on multiple interfaces (VPN+Internet) In-Reply-To: References: Message-ID: <1201548542.4583.0.camel@scorpion> Hi, Le lundi 28 janvier 2008 ? 15:43 -0200, Javier Villavicencio a ?crit : > Hello, > > I'm using Ekiga successfully on my work VoIP net. But sometimes I > would like to, also, try using some of the tollfree servers available > on the internet, yet this doesn't work unless I restart Ekiga after > changing the listening ip address, but then it doesn't work to my > work's VoIP. > > Problem is I have 2 different ip addresses on my computer, one is my > work's assigned VPN address, the other is my LAN address, both on the > same interface (eth1). > > If Ekiga starts on my LAN address I see arp packets asking who has my > work SIP server ip address, going through my LAN network. > > Instead, listening on my VPN address, it just tries to reach the > internet through the VPN which won't work since it's filtered ^_^. > > Is there any way to work around this? It will be one of the new features of Ekiga 3.00 :) I will add the code soon (perhaps tonight). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From borepstein at gmail.com Tue Jan 29 19:28:43 2008 From: borepstein at gmail.com (borepstein) Date: Tue, 29 Jan 2008 11:28:43 -0800 (PST) Subject: [Ekiga-list] PC-To-Phone Message-ID: <15165498.post@talk.nabble.com> Thanks Damien! Do you have a link to that FAQ? (I searched and found plenty of Ekiga documentation but none covered how to get the links to PC-to-phone working). Cheers, Boris. Damien Sandras wrote: > > Le lundi 03 juillet 2006 ? 18:59 -0700, starikarp a ?crit : >> Hi! >> >> I read that is possible to get free account for PC-To-Phone Call. In >> Ekiga I >> choose Tools-PC-To-Phone Account. There are link Get An Ekiga >> PC-To-Phone-account which I click but nothing happened. >> Please how could I registred for this account? >> > > Hi, > > For the links that are not working, it is a FAQ. (See the archives). > As for the free account, it is not free, but you have to pay > (unfortunately). > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone: http://www.ekiga.org/ > v_/_ FOSDEM 2006 : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > sip:600000 at ekiga.net > > _______________________________________________ > GnomeMeeting-list mailing list > GnomeMeeting-list at gnome.org > http://mail.gnome.org/mailman/listinfo/gnomemeeting-list > > -- View this message in context: http://www.nabble.com/PC-To-Phone-tp5160975p15165498.html Sent from the Ekiga General mailing list archive at Nabble.com. From javier.paya at gmail.com Tue Jan 29 22:05:30 2008 From: javier.paya at gmail.com (Javier Villavicencio) Date: Tue, 29 Jan 2008 20:05:30 -0200 Subject: [Ekiga-list] Running on multiple interfaces (VPN+Internet) In-Reply-To: <1201548542.4583.0.camel@scorpion> References: <1201548542.4583.0.camel@scorpion> Message-ID: On Jan 28, 2008 5:29 PM, Damien Sandras wrote: > Hi, > > Le lundi 28 janvier 2008 ? 15:43 -0200, Javier Villavicencio a ?crit : > > > Hello, > > > > I'm using Ekiga successfully on my work VoIP net. But sometimes I > > would like to, also, try using some of the tollfree servers available > > on the internet, yet this doesn't work unless I restart Ekiga after > > changing the listening ip address, but then it doesn't work to my > > work's VoIP. > > > > Problem is I have 2 different ip addresses on my computer, one is my > > work's assigned VPN address, the other is my LAN address, both on the > > same interface (eth1). > > > > If Ekiga starts on my LAN address I see arp packets asking who has my > > work SIP server ip address, going through my LAN network. > > > > Instead, listening on my VPN address, it just tries to reach the > > internet through the VPN which won't work since it's filtered ^_^. > > > > Is there any way to work around this? > > It will be one of the new features of Ekiga 3.00 :) > > I will add the code soon (perhaps tonight). Thanks for the quick response. Then I shall start making ekiga-svn ebuilds :+). While at that task, I can't (easily) find any cvs or svn for pwlib. The discussion here [1] seems a bit outdated (the cvs tgzs are 404). So I'm currently stuck looking for newer pwlib :$. [1] http://wiki.ekiga.org/index.php/Talk:Additional_Information From javier.paya at gmail.com Wed Jan 30 00:23:59 2008 From: javier.paya at gmail.com (Javier Villavicencio) Date: Tue, 29 Jan 2008 22:23:59 -0200 Subject: [Ekiga-list] Running on multiple interfaces (VPN+Internet) In-Reply-To: References: <1201548542.4583.0.camel@scorpion> Message-ID: Nevermind, silly me didn't see the name change pwlib->ptlib ^_^. From nathaniel.homier at gmail.com Wed Jan 30 19:02:07 2008 From: nathaniel.homier at gmail.com (Nathaniel Homier) Date: Wed, 30 Jan 2008 12:02:07 -0700 Subject: [Ekiga-list] Should I install 2.0.11-beta.exe or wait for new Windows version Message-ID: I am going to install Ekiga on Windows soon, so I am wondering if there is a new Windows version in the pipeline coming in February or March or April. If a new Windows version is more than 3 months out then I will just go ahead and install the version on the web site. Thanks for a great voip app. From george_reeves at comcast.net Thu Jan 31 14:21:40 2008 From: george_reeves at comcast.net (George Reeves) Date: Thu, 31 Jan 2008 09:21:40 -0500 Subject: [Ekiga-list] Ekiga v2.0.11 and Logitech Pro 9000 Message-ID: <47A1D974.7090501@comcast.net> I am running Kubuntu v7.04 and have installed Ekiga v2.0.3 via the repositories. My webcam, a Veo Stingray 1, does not provide me with a bright enough picture to use Ekiga; it has no controls to adjust the brightness. I purchased a Logitech Webcamera Pro 9000 to replace the Veo Stingray 1, but it hasn't worked out well. I think that I need to install a uvc driver, according to various threads I have read. Is this correct? I have two questions: (1) How do I find and install the proper driver for the Pro 9000? (2) How do I install Ekiga v2.0.11? I.e., I have been to the download website and have seen what files are available but I don't know which I need to download. In the past I have simply downloaded a .deb package and installed it, but this is a little more complicated than that. I am capable of downloading, de-gzping the files, and running (even compiling, if necessary!) an install. I just need some help in knowing what to download and what to install. Thanks for any help from a newbie. From nathaniel.homier at gmail.com Thu Jan 31 17:29:50 2008 From: nathaniel.homier at gmail.com (Nathaniel Homier) Date: Thu, 31 Jan 2008 10:29:50 -0700 Subject: [Ekiga-list] Ekiga v2.0.11 and Logitech Pro 9000 In-Reply-To: <47A1D974.7090501@comcast.net> References: <47A1D974.7090501@comcast.net> Message-ID: <47A2058E.6010102@gmail.com> George Reeves wrote: > I am running Kubuntu v7.04 and have installed Ekiga v2.0.3 via the > repositories. My webcam, a Veo Stingray 1, does not provide me with a > bright enough picture to use Ekiga; it has no controls to adjust the > brightness. > > I purchased a Logitech Webcamera Pro 9000 to replace the Veo Stingray 1, > but it hasn't worked out well. I think that I need to install a uvc > driver, according to various threads I have read. Is this correct? > > I have two questions: > (1) How do I find and install the proper driver for the Pro 9000? > (2) How do I install Ekiga v2.0.11? I.e., I have been to the download > website and have seen what files are available but I don't know which I > need to download. In the past I have simply downloaded a .deb package > and installed it, but this is a little more complicated than that. I am > capable of downloading, de-gzping the files, and running (even > compiling, if necessary!) an install. I just need some help in knowing > what to download and what to install. > > Thanks for any help from a newbie. Try one or all of these repository's. deb http://pkg-voip.buildserver.net/ubuntu feisty main deb http://pkg-voip.buildserver.net/ubuntu feisty-experimental main deb http://snapshots.ekiga.net/ubuntu/ feisty main deb http://snapshots.voxgratia.org/ubuntu/ feisty main I will also add that the wiki is really great but very difficult to find on the main site. http://wiki.ekiga.org/index.php/Main_Page Nate From sinkr at cbl.umces.edu Thu Jan 31 18:05:47 2008 From: sinkr at cbl.umces.edu (Robert Sink) Date: Thu, 31 Jan 2008 13:05:47 -0500 Subject: [Ekiga-list] 2.0.11 100 KByte max video bandwith cap? Message-ID: <18338.3579.26600.286608@tempermental.cbl.umces.edu> I searched around and the only post I could find on this topic was: http://www.mail-archive.com/ekiga-devel-list at gnome.org/msg00989.html ...and the responders got caught up in the semantics of this person asking for a free lunch (someone compiling him a version), instead of addressing the question of "why there is a 100KByte max bandwidth cap." So, I'm asking again here, because for what I can tell on both the Windows and Linux/Ubuntu 2.0.11 versions, this cap seems to be arbitrary and could prevent certain connections from taking place (for instance, our Cisco MCU is configured to a minimum of 384KByte). I've tried editing .gconf/apps/ekiga/codecs/video/%gconf.xml to see if there was just a limit put on the input box and after this test and looking @ the latest 2.0.11 source, it does in fact look like this is hard set in druid.cpp, line 1528: gm_conf_set_int (VIDEO_CODECS_KEY "maximum_video_bandwidth", 100); So, to reiterate, I'm simply asking why this is as it is. Apologies if this is a mal/uninformed question, though I feel like I've tried to research this out on my own as far as I can go; I'm completely comfortable compiling my own version with a higher arbitrary limit, but am looking for the rationale as to why this was set this way to begin with. Regards, +R