From ray.ishido at gmail.com Sat Sep 1 20:02:07 2007 From: ray.ishido at gmail.com (Ray Ishido) Date: Sat, 01 Sep 2007 17:02:07 -0300 Subject: [Ekiga-list] glibc detected *** ekiga: malloc(): memory corruption (fast): 0x08364930 *** Message-ID: <46D9C53F.4010602@gmail.com> hi, I just recompile my entire system and can't no longer run ekiga (v2.0.9). here is what happen: ray at localhost ~ $ ekiga --debug=6 2007/09/01 16:56:31.441 0:00.807 ekiga Detected audio plugins: ALSA 2007/09/01 16:56:31.441 0:00.807 ekiga Detected video plugins: Picture,V4L2,V4L 2007/09/01 16:56:31.442 0:00.808 ekiga Detected audio plugins: ALSA 2007/09/01 16:56:31.442 0:00.808 ekiga Detected video plugins: Picture,V4L2,V4L 2007/09/01 16:56:31.646 0:01.012 ekiga Detected the following audio input devices: Default,HDA Intel with plugin ALSA 2007/09/01 16:56:31.647 0:01.013 ekiga Detected the following audio output devices: Default,HDA Intel with plugin ALSA 2007/09/01 16:56:31.647 0:01.013 ekiga Detected the following video input devices: Pixart PAC207-BCA with plugin V4L 2007/09/01 16:56:31.647 0:01.013 ekiga Detected the following audio input devices: Default,HDA Intel with plugin ALSA 2007/09/01 16:56:31.647 0:01.013 ekiga Detected the following audio output devices: Default,HDA Intel with plugin ALSA 2007/09/01 16:56:31.647 0:01.013 ekiga Detected the following video input devices: Pixart PAC207-BCA with plugin V4L 2007/09/01 16:56:33.017 0:02.383 ekiga Ekiga version 2.0.9 2007/09/01 16:56:33.018 0:02.384 ekiga OPAL version 2.2.8 2007/09/01 16:56:33.018 0:02.384 ekiga PWLIB version 1.10.7 2007/09/01 16:56:33.019 0:02.385 ekiga GNOME support enabled 2007/09/01 16:56:33.020 0:02.386 ekiga Fullscreen support disabled 2007/09/01 16:56:33.021 0:02.387 ekiga DBUS support enabled 2007/09/01 16:56:33.024 0:02.390 ekiga Set TCP port range to 30000:30010 2007/09/01 16:56:33.025 0:02.391 ekiga Set RTP port range to 5000:5059 2007/09/01 16:56:33.027 0:02.393 ekiga Set UDP port range to 5060:5100 *** glibc detected *** ekiga: malloc(): memory corruption (fast): 0x08364930 *** ======= Backtrace: ========= /lib/libc.so.6[0xb6a8bd3a] /lib/libc.so.6[0xb6a8e50f] /lib/libc.so.6(malloc+0x83)[0xb6a8f3ed] /usr/lib/gcc/i686-pc-linux-gnu/4.2.0/libstdc++.so.6(_Znwj+0x29)[0xb6c2bfc9] /usr/lib/libopal_linux_x86_n.so.2.2(_ZN12OpalListener11StartThreadERK9PNotifieri+0x51)[0xb6f3de51] ======= Memory map: ======== 08048000-080eb000 r-xp 00000000 08:03 3559939 /usr/bin/ekiga 080eb000-080f2000 rw-p 000a2000 08:03 3559939 /usr/bin/ekiga 080f2000-083e0000 rw-p 080f2000 00:00 0 [heap] b392c000-b3b85000 rw-s 00000000 00:0e 126166 /dev/v4l/video0 b3b85000-b3b86000 ---p b3b85000 00:00 0 b3b86000-b3c11000 rw-p b3b86000 00:00 0 b3c11000-b3c29000 r--p 00000000 08:03 3505162 /usr/share/locale/fr/LC_MESSAGES/evolution-data-server-1.10.mo b3c29000-b3c2a000 ---p b3c29000 00:00 0 b3c2a000-b3c6a000 rw-p b3c2a000 00:00 0 b3c6a000-b3c6b000 ---p b3c6a000 00:00 0 b3c6b000-b446b000 rw-p b3c6b000 00:00 0 b446b000-b4495000 r-xp 00000000 08:03 2767991 /usr/lib/libcroco-0.6.so.3.0.1 b4495000-b4498000 rw-p 00029000 08:03 2767991 /usr/lib/libcroco-0.6.so.3.0.1 b4498000-b44be000 r-xp 00000000 08:03 3297125 /usr/lib/libgsf-1.so.114.0.5 b44be000-b44c0000 rw-p 00026000 08:03 3297125 /usr/lib/libgsf-1.so.114.0.5 b44c0000-b44c1000 rw-p b44c0000 00:00 0 b44c1000-b44e7000 r-xp 00000000 08:03 2218717 /usr/lib/librsvg-2.so.2.16.1 b44e7000-b44e8000 rw-p 00026000 08:03 2218717 /usr/lib/librsvg-2.so.2.16.1 b44ff000-b4500000 ---p b44ff000 00:00 0 b4500000-b4d21000 rw-p b4500000 00:00 0 b4d21000-b4e00000 ---p b4d21000 00:00 0 b4e05000-b4e0b000 r-xp 00000000 08:03 3275057 /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-xpm.so b4e0b000-b4e0c000 rw-p 00005000 08:03 3275057 /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-xpm.so b4e0c000-b4e0d000 r-xp 00000000 08:03 3275356 /usr/lib/gtk-2.0/2.10.0/immodules/im-cedilla.so b4e0d000-b4e0e000 rw-p 00000000 08:03 3275356 /usr/lib/gtk-2.0/2.10.0/immodules/im-cedilla.so b4e0e000-b4e0f000 ---p b4e0e000 00:00 0 b4e0f000-b560f000 rw-p b4e0f000 00:00 0 b560f000-b5613000 r-xp 00000000 08:03 2596785 /usr/lib/libfam.so.0.0.0 b5613000-b5614000 rw-p 00003000 08:03 2596785 /usr/lib/libfam.so.0.0.0 b5615000-b5618000 r--p 00000000 08:03 2648082 /usr/share/locale/fr/LC_MESSAGES/atk10.mo b5618000-b5623000 r-xp 00000000 08:03 2931628 /lib/libbz2.so.1.0.4 b5623000-b5624000 rw-p 0000b000 08:03 2931628 /lib/libbz2.so.1.0.4 b5624000-b562b000 r--p 00000000 08:03 3294073 /usr/share/locale/fr/LC_MESSAGES/libgnomeui-2.0.mo b562b000-b5634000 r-xp 00000000 08:03 3299133 /usr/lib/gnome-vfs-2.0/modules/libfile.so b5634000-b5635000 rw-p 00008000 08:03 3299133 /usr/lib/gnome-vfs-2.0/modules/libfile.so b5635000-b563e000 r-xp 00000000 08:03 2670289 /usr/lib/gtk-2.0/2.10.0/filesystems/libgnome-vfs.so b563e000-b563f000 rw-p 00008000 08:03 2670289 /usr/lib/gtk-2.0/2.10.0/filesystems/libgnome-vfs.so b563f000-b569f000 rw-s 00000000 00:07 6553664 /SYSV00000000 (deleted) b569f000-b56ae000 r--p 00000000 08:03 1185411 /usr/share/fonts/ttf-bitstream-vera/VeraBd.ttf b56ae000-b56bf000 r--p 00000000 08:03 1185429 /usr/share/fonts/ttf-bitstream-vera/Vera.ttf b56bf000-b56c1000 r-xp 00000000 08:03 2448099 /usr/lib/pango/1.6.0/modules/pango-basic-fc.so b56c1000-b56c2000 rw-p 00001000 08:03 2448099 /usr/lib/pango/1.6.0/modules/pango-basic-fc.so b56c2000-b56c8000 r--s 00000000 08:03 329559 /var/cache/fontconfig/87f5e051180a7a75f16eb6fe7dbd3749-x86.cache-2 b56c8000-b56ca000 r--s 00000000 08:03 329572 /var/cache/fontconfig/76fa4b957c916922374347f144bde9da-x86.cache-2 b56ca000-b56d8000 r--s 00000000 08:03 329571 /var/cache/fontconfig/8d4af663993b81a124ee82e610bb31f9-x86.cache-2 b56d8000-b56e4000 r--s 00000000 08:03 329544 /var/cache/fontconfig/4b5cf4386f1cde02a336ba961b4ac82d-x86.cache-2 b56e4000-b56e7000 r--s 00000000 08:03 329650 /var/cache/fontconfig/d62e99ef547d1d24cdb1bd22ec1a2976-x86.cache-2 b56e7000-b570e000 r--s 00000000 08:03 332047 /var/cache/fontconfig/17090aa38d5c6f09fb8c5c354938f1d7-x86.cache-2 b570e000-b5735000 r--s 00000000 08:03 332046 /var/cache/fontconfig/df311e82a1a24c41a75c2c930223552e-x86.cache-2 b5735000-b5836000 r--p 00000000 08:03 2649474 /usr/share/icons/hicolor/icon-theme.cache b5836000-b6081000 r--p 00000000 08:03 31869 /usr/share/icons/gnome/icon-theme.cache b6081000-b60ca000 rw-p b6081000 00:00 0 b60ca000-b60e8000 r--p 00000000 08:03 3467022 /usr/share/locale/fr/LC_MESSAGES/libc.mo b60e8000-b6100000 r-xp 00000000 08:03 2618737 /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so b6100000-b6101000 rw-p 00018000 08:03 2618737 /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so b6101000-b6102000 ---p b6101000 00:00 0 b6102000-b6142000 rw-p b6102000 00:00 0 b6142000-b6143000 ---p b6142000 00:00 0 b6143000-b6183000 rw-p b6143000 00:00 0 b6183000-b6198000 r-xp 00000000 08:03 2197806 /usr/lib/pwlib/devices/videoinput/v4l_pwplugin.so b6198000-b6199000 rw-p 00015000 08:03 2197806 /usr/lib/pwlib/devices/videoinput/v4l_pwplugin.so b6199000-b61af000 r-xp 00000000 08:03 2197805 /usr/lib/pwlib/devices/videoinput/v4l2_pwplugin.so b61af000-b61b0000 rw-p 00015000 08:03 2197805 /usr/lib/pwlib/devices/videoinput/v4l2_pwplugin.so b61b0000-b61c5000 r-xp 00000000 08:03 2197803 /usr/lib/pwlib/devices/sound/alsa_pwplugin.so b61c5000-b61c6000 rw-p 00015000 08:03 2197803 /usr/lib/pwlib/devices/sound/alsa_pwplugin.so b61c6000-b61dc000 r--p 00000000 08:03 3560028 /usr/share/locale/fr/LC_MESSAGES/ekiga.mo b61dc000-b61ff000 r--p 00000000 08:03 3275011 /usr/share/locale/fr/LC_MESSAGES/gtk20-properties.mo b61ff000-b6207000 r-xp 00000000 08:03 3467026 /lib/libnss_files-2.6.1.so b6207000-b6209000 rw-p 00007000 08:03 3467026 /lib/libnss_files-2.6.1.so b6209000-b6211000 r-xp 00000000 08:03 3467197 /lib/libnss_nis-2.6.1.so b6211000-b6213000 rw-p 00007000 08:03 3467197 /lib/libnss_nis-2.6.1.so b6213000-b6219000 r-xp 00000000 08:03 3465879 /lib/libnss_compat-2.6.1.so b6219000-b621b000 rw-p 00005000 08:03 3465879 /lib/libnss_compat-2.6.1.so b621c000-b6220000 r--p 00000000 08:03 3559295 /usr/share/icons/Nuvola/icon-theme.cache b6220000-b6226000 r--p 00000000 08:03 3281116 /usr/share/locale/fr/LC_MESSAGES/glib20.mo b6226000-b6229000 r-xp 00000000 08:03 3275075 /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-png.so b6229000-b622a000 rw-p 00002000 08:03 3275075 /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-png.so b622a000-b6232000 r--p 00000000 08:03 2670212 /usr/share/locale/fr/LC_MESSAGES/libgnome-2.0.mo b6232000-b6243000 r--p 00000000 08:03 3275010 /usr/share/locale/fr/LC_MESSAGES/gtk20.mo b6243000-b6282000 r--p 00000000 08:03 7020 /usr/lib/locale/fr_FR.utf8/LC_CTYPE b6282000-b6362000 r--p 00000000 08:03 7026 /usr/lib/locale/fr_FR.utf8/LC_COLLATE b6362000-b6366000 rw-p b6362000 00:00 0 b6366000-b63a2000 r-xp 00000000 08:03 3230339 /usr/lib/nss/libsoftokn3.so.11 b63a2000-b63a6000 rw-p 0003b000 08:03 3230339 /usr/lib/nss/libsoftokn3.so.11 b63a6000-b63aa000 r-xp 00000000 08:03 2422433 /usr/lib/libXdmcp.so.6.0.0 b63aa000-b63ab000 rw-p 00003000 08:03 2422433 /usr/lib/libXdmcp.so.6.0.0 b63ab000-b6405000 r-xp 00000000 08:03 3230340 /usr/lib/nss/libnss3.so.11 b6405000-b640a000 rw-p 00059000 08:03 3230340 /usr/lib/nss/libnss3.so.11 b640a000-b6426000 r-xp 00000000 08:03 3230336 /usr/lib/nss/libsmime3.so.11 b6426000-b6428000 rw-p 0001c000 08:03 3230336 /usr/lib/nss/libsmime3.so.11 b6428000-b6429000 rw-p b6428000 00:00 0 b6429000-b6448000 r-xp 00000000 08:03 3230337 /usr/lib/nss/libssl3.so.11 b6448000-b644a000 rw-p 0001e000 08:03 3230337 /usr/lib/nss/libssl3.so.11 b644a000-b644c000 r-xp 00000000 08:03 2056605 /usr/lib/libXau.so.6.0.0 b644c000-b644d000 rw-p 00001000 08:03 2056605 /usr/lib/libXau.so.6.0.0 b644d000-b6461000 r-xp 00000000 08:03 2770459 /usr/lib/libxcb.so.1.0.0 b6461000-b6462000 rw-p 00013000 08:03 2770459 /usr/lib/libxcb.so.1.0.0 b6462000-b6463000 r-xp 00000000 08:03 2770306 /usr/lib/libxcb-xlib.so.0.0.0 b6463000-b6464000 rw-p 00000000 08:03 2770306 /usr/lib/libxcb-xlib.so.0.0.0 b6464000-b6465000 rw-p b6464000 00:00 0 b6465000-b647f000 r-xp 00000000 08:03 2932257 /usr/lib/libexpat.so.1.5.2 b647f000-b6481000 rw-p 0001a000 08:03 2932257 /usr/lib/libexpat.so.1.5.2 b6481000-b64ac000 r-xp 00000000 08:03 2677760 /usr/lib/libldap_r-2.3.so.0.2.25 b64ac000-b64ae000 rw-p 0002a000 08:03 2677760 /usr/lib/libldap_r-2.3.so.0.2.25 b64ae000-b64b3000 rw-p b64ae000 00:00 0 b64b3000-b64bc000 r-xp 00000000 08:03 2678167 /usr/lib/liblber-2.3.so.0.2.25 b64bc000-b64bd000 rw-p 00008000 08:03 2678167 /usr/lib/liblber-2.3.so.0.2.25 b64bd000-b64e5000 r-xp 00000000 08:03 2677784 /usr/lib/libldap-2.3.so.0.2.25 b64e5000-b64e6000 rw-p 00028000 08:03 2677784 /usr/lib/libldap-2.3.so.0.2.25 b64e6000-b64f8000 r-xp 00000000 08:03 3467045 /lib/libnsl-2.6.1.so b64f8000-b64fa000 rw-p 00011000 08:03 3467045 /lib/libnsl-2.6.1.so b64fa000-b64fd000 rw-p b64fa000 00:00 0 b64fd000-b6500000 r-xp 00000000 08:03 3280070 /usr/lib/libORBitCosNaming-2.so.0.1.0 b6500000-b6501000 rw-p 00003000 08:03 3280070 /usr/lib/libORBitCosNaming-2.so.0.1.0 b6501000-b65e5000 r-xp 00000000 08:03 3309539 /usr/lib/libdb-4.5.so b65e5000-b65e8000 rw-p 000e3000 08:03 3309539 /usr/lib/libdb-4.5.so b65e8000-b660e000 r-xp 00000000 08:03 3216072 /usr/lib/nspr/libnspr4.so.6 b660e000-b660f000 rw-p 00026000 08:03 3216072 /usr/lib/nspr/libnspr4.so.6 b660f000-b6611000 rw-p b660f000 00:00 0 b6611000-b6614000 r-xp 00000000 08:03 3216076 /usr/lib/nspr/libplc4.so.6 b6614000-b6615000 rw-p 00002000 08:03 3216076 /usr/lib/nspr/libplc4.so.6 b6615000-b6617000 r-xp 00000000 08:03 3216074 /usr/lib/nspr/libplds4.so.6 b6617000-b6618000 rw-p 00001000 08:03 3216074 /usr/lib/nspr/libplds4.so.6 b6618000-b6619000 rw-p b6618000 00:00 0 b6619000-b6654000 r-xp 00000000 08:03 3504956 /usr/lib/libcamel-1.2.so.10.0.0 b6654000-b6657000 rw-p 0003b000 08:03 3504956 /usr/lib/libcamel-1.2.so.10.0.0 b6657000-b6675000 r-xp 00000000 08:03 2542264 /usr/lib/libpng12.so.0.19.0 b6675000-b6676000 rw-p 0001d000 08:03 2542264 /usr/lib/libpng12.so.0.19.0 b6676000-b6696000 r-xp 00000000 08:03 1864317 /usr/lib/libglitz.so.1.0.0 b6696000-b6697000 rw-p 00020000 08:03 1864317 /usr/lib/libglitz.so.1.0.0 b6697000-b669e000 r-xp 00000000 08:03 2725668 /usr/lib/libXcursor.so.1.0.2 b669e000-b669f000 rw-p 00006000 08:03 2725668 /usr/lib/lPlusieurs erreurs de segmentation sont survenues ; impossible d'afficher la bo?te de dialogue d'erreur I use a gentoo. how can I solve the problem? Thanks Ray -- -= G3NT00 P0W3RED!!!! =- -----BEGIN PGP PUBLIC KEY BLOCK----- Version: GnuPG v2.0.4 (GNU/Linux) mQGiBEW+fVURBACgxJ0kTvhQOPzQ/rLau6wMapgcorx72iS6/B3BQFJqtiLkFs8p URsTizxdlCnZOlla+xCCXzaOudoewHtbXgTpT4ezNpdCF2a4jDQ6CaasvgBD5Blp alVs62ZcUqu4vkye84N+qNC5GUuxFPRoYQzfnr0tru5gmwAe7SfOFfTplwCgnNBF 6a+J8fjoQ5MCImw6Yxhu2jcD/R2XZnCvTOYgadQPN15UMpMuu3400IoXEzPBNXof dGxnD0JpQcw+yA6dsmrfCjcJKCmAa2TWP5F+m/Mr0NdliKupFgnm9oCd8wxZLsRS 7Oag0KzDeJh9POsA3Drh1qHqPeBI5PewDvOc1lCfX5PXV8khTo/fI6gdmjElSqZX 6wfHBACEu7E23FsIPqVCmbzA0ETm48MpJrbohUwra/GVZBDuwQbiKYjD3bAJFSpC DADHoCu93QOQbgoT8V4Zus6D+PT32oYuarYqB7R6ozVVZZZxpfP7upnLRERFmPBH K9qFAa1RgTaQEvt7Z9pRv5ScseXtcJT36Md0jwGTvtb5N05zN7QpUmF5IElzaGlk byAoW0VsQ10pIDxyYXkuaXNoaWRvQGdtYWlsLmNvbT6IYAQTEQIAIAUCRb59VQIb AwYLCQgHAwIEFQIIAwQWAgMBAh4BAheAAAoJEGIRkrVm+N74Hg8AmwR7I7z+h8UJ SRAT+q0vcl0naoFGAJ4xq+AF+W/QUf/6416vazhdDKCJzbkCDQRFvn1dEAgA4SgG ypBeMRAxwW4FGli6/yoTXX5R2okeQCQkx9hkRHiNnAck8g6c3gaWf616s6OtGJNR VFbgwLFO4aN50bfkuSq4cU577bjtOE6qNMjCTw3rHvctyk3xnpfy6wljx6X7QORq 0NBnEXzSIgKS4BD2RUPp8Im1uW/lWDAaRXexUfLC8i67E7GLCplT7QdA+XVEk+EX 8SZGw3qmtIRadfLj3fL3ruo8FfLBFEsWL794iUUUpvN5LreUoU1sBX76n8K9kYTo 7D83qyRPoAyBD7fXskQCQQ2CO8ejz4Z4ovt/OiKJMVWCg2f8WZehWWHIy6rXA+Vq SE3cLtsOT3jq9Yz51wADBQgAkRFL6V0XHwkXCq8vtCGZ5M35tE/9Qb4fm65G/PjW Z0edHe9l3aqWFRc/I9S3QRWe0lVXLuX4ZRjDo6jgvieiA+0eq2XtFOdCODv7bJBW xqGFBN91F68QMUOUKI+AgGaw8FA/dd64/c2hX4ROki2OtsXbP2HeKLluN0017jGu vM1WfIZjdA72X51IbDe11IQ27LYyjYthqDCyLFYOkdaMTaBCjUiXi/EVyWxn9EQ7 6woPfBHMtx/Xf2wEZXRJVBKA863/E/y4savjKbAkipoqAN5L9F25Txq+DMmTM5jj jnQeYTna1rXsXipvUofqGcY5c9Dw06VFRgvVry84u5PrLohJBBgRAgAJBQJFvn1d AhsMAAoJEGIRkrVm+N74KS4AoIfoCfSJ7aLIXFqu81q3aUHkA5ZwAKCCFznDwMd+ IVbBFKbNxeG6QBKk9Q== =DSsR -----END PGP PUBLIC KEY BLOCK----- From jpuydt at free.fr Sat Sep 1 20:18:52 2007 From: jpuydt at free.fr (Julien Puydt) Date: Sat, 01 Sep 2007 22:18:52 +0200 Subject: [Ekiga-list] glibc detected *** ekiga: malloc(): memory corruption (fast): 0x08364930 *** In-Reply-To: <46D9C53F.4010602@gmail.com> References: <46D9C53F.4010602@gmail.com> Message-ID: <46D9C92C.7030906@free.fr> Ray Ishido a ?crit : > I just recompile my entire system and can't no longer run ekiga > (v2.0.9). here is what happen: > I use a gentoo. how can I solve the problem? I see two ways : 1) trying to fix your install : which optimization options do you use to compile ekiga ? 2) trying to fix your system : install a sane distribution, with nice binary packages which have a chance to work&break almost everywhere, hence can be debugged. Snark on #ekiga From sevmek at free.fr Sun Sep 2 20:12:54 2007 From: sevmek at free.fr (yannick) Date: Sun, 02 Sep 2007 22:12:54 +0200 Subject: [Ekiga-list] Reporting a sound failure after some time Ekiga Linux<->Ekiga win Message-ID: <1188763974.10895.137.camel@achille> Hi, Some guys asked me to help him but it harder for me to solve this. In french here: http://forum.ubuntu-fr.org/viewtopic.php?pid=1146629#p1146629 Issue is: after some minutes (usually from 1 to 4) sound stop from win to linux. The guy provide a -d 4 and tested ekiga windows version 2.0.9 and 2.0.10 with the same issue. Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dsandras at seconix.com Sun Sep 2 20:41:51 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 02 Sep 2007 22:41:51 +0200 Subject: [Ekiga-list] Reporting a sound failure after some time Ekiga Linux<->Ekiga win In-Reply-To: <1188763974.10895.137.camel@achille> References: <1188763974.10895.137.camel@achille> Message-ID: <1188765711.4009.4.camel@scorpion> Hi, Le dimanche 02 septembre 2007 ? 22:12 +0200, yannick a ?crit : > Hi, > > Some guys asked me to help him but it harder for me to solve this. > In french here: > http://forum.ubuntu-fr.org/viewtopic.php?pid=1146629#p1146629 > > Issue is: after some minutes (usually from 1 to 4) sound stop from win > to linux. > > The guy provide a -d 4 and tested ekiga windows version 2.0.9 and 2.0.10 > with the same issue. He probably has a NAT router and the NAT binding is being closed. But it could also be some other problem. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jason at dixongroup.net Sun Sep 2 20:49:12 2007 From: jason at dixongroup.net (Jason Dixon) Date: Sun, 2 Sep 2007 16:49:12 -0400 Subject: [Ekiga-list] Slideshow broadcasting Message-ID: [ Resending to the list... ] We're looking to improve on our broadcasts for the MetaBUG (http:// metabug.org), as well as possible future Linux/BSD conferences. One of our members mentioned Ekiga, but I wasn't able to determine if it met all of our feature needs. Here are the features we're looking for: - FOSS - Runs on *BSD - Audio/Video streaming to QTSS - Video capture of presenter's screen (slides) We've been using QuickTime Broadcaster on OS X to stream A/V capture from my DV camera. To be blunt, this method sucks (the capture part, not the streaming part). Ideally we want to take the slides directly off the presenter's laptop and stream it with audio from an external mic. I've found a commercial offering (http://www.varasoftware.com/ products/wirecast/) that does this, but the price hurts and it only runs on Windows/Mac. Thanks, --- Jason Dixon DixonGroup Consulting http://www.dixongroup.net From mcs1 at ntlworld.com Mon Sep 3 09:46:06 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Mon, 3 Sep 2007 10:46:06 +0100 (BST) Subject: [Ekiga-list] Ekiga and vista In-Reply-To: <20070828122238.GB5228@sd-11162.dedibox.fr> References: <000d01c7e8d4$15e79dc0$0201a8c0@adagru> <29876954.131188239337648.OPEN-XCHANGE.WebMail.nobody@sam> <1188286563.4226.2.camel@scorpion> <2355643.151188289764727.OPEN-XCHANGE.WebMail.nobody@sam> <20070828122238.GB5228@sd-11162.dedibox.fr> Message-ID: <24840600.11188812767039.OPEN-XCHANGE.WebMail.nobody@sam> Hi, Some investigation but no solution yet... I just had a look around and found in the developer mailing list for ekiga the same problem in Redhat. http://mail.gnome.org/archives/ekiga-devel-list/2007-August/msg00002.html The camera does not come on after a call and in vista this stops ekiga, and so it does in redhat! In this thread a driver problem was suggested, but as far as I can see no solution was given ((There wer some patches for the driver). That si of coursre not possible in M$ drivers. I also tried a different camera and same behaviour. The fact that the problem also occurs in RH makes me wonder if it is a driver issue? Cheers Michael ? On Tue 28.08.2007 13:22, Luc Saillard wrote: >On Tue, Aug 28, 2007 at 09:29:24AM +0100, Michael Stockenhuber wrote: >>Thanks for the reply, >> >>Could Luc give me some idea how I could trace this? >>I am not a complete duffer in programming but then I have not a lot of >>experience either. I don't do this for a living, so my knowldege is >>limited. >>I am wondering why I do not get anything from gdb. I did not get a >>SIGSEV as mentioned in the wiki. Maybe this? has to do with the fact >>that ekiga does not really give a "not responding message", it just >>does >>not respond! >>Cheers > >Hum i don't known how to debug ... i don't have a windows vista here to >test >(never see it running btw). What we can do is to build the pwlib sample >program to test if it's the directshow part that segfault. > >Luc >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From craigs at postincrement.com Mon Sep 3 10:59:48 2007 From: craigs at postincrement.com (Craig Southeren) Date: Mon, 03 Sep 2007 20:59:48 +1000 Subject: [Ekiga-list] Slideshow broadcasting In-Reply-To: References: Message-ID: <46DBE924.2070106@postincrement.com> Jason Dixon wrote: > [ Resending to the list... ] > > We're looking to improve on our broadcasts for the MetaBUG (http:// > metabug.org), as well as possible future Linux/BSD conferences. One > of our members mentioned Ekiga, but I wasn't able to determine if it > met all of our feature needs. Here are the features we're looking for: > > - FOSS > - Runs on *BSD > - Audio/Video streaming to QTSS > - Video capture of presenter's screen (slides) > > We've been using QuickTime Broadcaster on OS X to stream A/V capture > from my DV camera. To be blunt, this method sucks (the capture part, > not the streaming part). Ideally we want to take the slides directly > off the presenter's laptop and stream it with audio from an external > mic. I've found a commercial offering (http://www.varasoftware.com/ > products/wirecast/) that does this, but the price hurts and it only > runs on Windows/Mac. We're working on an OPAL based solution for this problem. Hannes Friedreich has implemented the ability have multiple video streams with a single call, which is necessary for sending both video and application capture. This code will be integrated into the CVS head after the next stable release (in the next few weeks). I am working on an MCU which will allow this data to be shared amongst multiple callers. It's all just a matter of time :) Craig ----------------------------------------------------------------------- Craig Southeren Post Increment ? VoIP Consulting and Software craigs at postincrement.com.au www.postincrement.com.au Phone: +61 243654666 ICQ: #86852844 Fax: +61 243656905 MSN: craig_southeren at hotmail.com Mobile: +61 417231046 Jabber: craigs at jabber.org "Science is the poetry of reality." Richard Dawkins From ray.ishido at gmail.com Mon Sep 3 17:35:45 2007 From: ray.ishido at gmail.com (Ray Ishido) Date: Mon, 03 Sep 2007 14:35:45 -0300 Subject: [Ekiga-list] glibc detected *** ekiga: malloc(): memory corruption (fast): 0x08364930 *** In-Reply-To: <46D9C92C.7030906@free.fr> References: <46D9C53F.4010602@gmail.com> <46D9C92C.7030906@free.fr> Message-ID: <46DC45F1.3050500@gmail.com> An HTML attachment was scrubbed... URL: From mcs1 at ntlworld.com Mon Sep 3 19:03:06 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Mon, 3 Sep 2007 20:03:06 +0100 (BST) Subject: [Ekiga-list] libldap.dll Message-ID: <3278348.31188846186887.OPEN-XCHANGE.WebMail.nobody@sam> Using the new win32 snapshot (20070903) I get libldap.dll not found (vista again!!). Anyone knows a link for the library? Thank you Michael Powered by Open-Xchange.com Powered by Open-Xchange.com From holli at holli.at Mon Sep 3 18:30:10 2007 From: holli at holli.at (HOLLI.AT) Date: Mon, 3 Sep 2007 20:30:10 +0200 Subject: [Ekiga-list] ekiga on windows Message-ID: <000001c7ee5d$41ae9c40$8119fea9@sbb01.spoc.global> hello, i installed ekiga on windows xp and i have a logitech QuickCam? Communicate STXT - the webcam is working fine on windows with the logitech application - but in ekiga i only get a green screen? 20:27:52 Started Ekiga 2.0.9 for user TH 20:27:52 Opening video device Microsoft WDM Image Capture (Win32) with plugin VideoForWindows 20:28:03 Successfully opened video device Microsoft WDM Image Capture (Win32), channel 0 any help would be great. thanks holli -------------- next part -------------- An HTML attachment was scrubbed... URL: From mcs1 at ntlworld.com Mon Sep 3 19:20:57 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Mon, 3 Sep 2007 20:20:57 +0100 (BST) Subject: [Ekiga-list] ekiga on windows In-Reply-To: <000001c7ee5d$41ae9c40$8119fea9@sbb01.spoc.global> References: <000001c7ee5d$41ae9c40$8119fea9@sbb01.spoc.global> Message-ID: <32826737.41188847257945.OPEN-XCHANGE.WebMail.nobody@sam> Use version 2.0.10 ancd directshow codec, that one works in XP with HP wbecam and Canyon. Had the same green screen with the WDM driver download: http://www.novacom.be/downloads/alcatel/ekiga-setup-2.0.10-BETA.exe Cheers Michael On Mon 03.09.2007 19:30, HOLLI.AT wrote: >hello, > >i installed ekiga on windows xp and i have a logitech QuickCam? >Communicate STXT - the webcam is working fine on windows with the >logitech application - but in ekiga i only get a green screen? > >20:27:52 Started Ekiga 2.0.9 for user TH >20:27:52 Opening video device Microsoft WDM Image Capture (Win32) with >plugin VideoForWindows >20:28:03 Successfully opened video device Microsoft WDM Image Capture >(Win32), channel 0 > >any help would be great. > >thanks >holli > > Powered by Open-Xchange.com From holli at holli.at Mon Sep 3 19:42:45 2007 From: holli at holli.at (HOLLI.AT) Date: Mon, 3 Sep 2007 21:42:45 +0200 Subject: [Ekiga-list] ekiga on windows References: <000001c7ee5d$41ae9c40$8119fea9@sbb01.spoc.global> <32826737.41188847257945.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <001401c7ee62$9c1f9670$8119fea9@sbb01.spoc.global> thanks - video is working... ----- Original Message ----- From: "Michael Stockenhuber" To: "Ekiga mailing list" Sent: Monday, September 03, 2007 9:20 PM Subject: Re: [Ekiga-list] ekiga on windows > Use version 2.0.10 ancd directshow codec, that one works in XP with HP > wbecam and Canyon. Had the same green screen with the WDM driver > download: > > http://www.novacom.be/downloads/alcatel/ekiga-setup-2.0.10-BETA.exe > > Cheers > > Michael > > > > On Mon 03.09.2007 19:30, HOLLI.AT wrote: > >>hello, >> >>i installed ekiga on windows xp and i have a logitech QuickCam? >>Communicate STXT - the webcam is working fine on windows with the >>logitech application - but in ekiga i only get a green screen? >> >>20:27:52 Started Ekiga 2.0.9 for user TH >>20:27:52 Opening video device Microsoft WDM Image Capture (Win32) with >>plugin VideoForWindows >>20:28:03 Successfully opened video device Microsoft WDM Image Capture >>(Win32), channel 0 >> >>any help would be great. >> >>thanks >>holli >> >> > Powered by Open-Xchange.com > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From dsandras at seconix.com Mon Sep 3 20:59:08 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 03 Sep 2007 22:59:08 +0200 Subject: [Ekiga-list] glibc detected *** ekiga: malloc(): memory corruption (fast): 0x08364930 *** In-Reply-To: <46DC45F1.3050500@gmail.com> References: <46D9C53F.4010602@gmail.com> <46D9C92C.7030906@free.fr> <46DC45F1.3050500@gmail.com> Message-ID: <1188853148.3903.13.camel@scorpion> Le lundi 03 septembre 2007 ? 14:35 -0300, Ray Ishido a ?crit : > Hi, > > thanks for the answer. > > I fixed the problem. As I suspected the pb is gcc 4.2.0: > opal 2.2.8 refuse to compile if pwlib 1.10.7 was compile with gcc > 4.2.0 > here is the bug report for opal and a patch for gentoo (as the patch > is adapted from suse distribution I think the problem may (if not > already) also appear on binary distribution) > > http://bugs.gentoo.org/show_bug.cgi?id=184542 > I just committed the patch to 2.0.10 and HEAD. Thanks! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jpuydt at free.fr Tue Sep 4 05:56:12 2007 From: jpuydt at free.fr (Julien Puydt) Date: Tue, 04 Sep 2007 07:56:12 +0200 Subject: [Ekiga-list] libldap.dll In-Reply-To: <3278348.31188846186887.OPEN-XCHANGE.WebMail.nobody@sam> References: <3278348.31188846186887.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <46DCF37C.3020003@free.fr> Michael Stockenhuber a ?crit : > Using the new win32 snapshot (20070903) I get libldap.dll not found > (vista again!!). > Anyone knows a link for the library? Eh, we don't depend on libldap.dll through pwlib, but we still depend on it, directly! So the libldap.dll should be added back to the archive :-) Snark From holli at holli.at Tue Sep 4 14:10:00 2007 From: holli at holli.at (holli@holli.at ) Date: Tue, 4 Sep 2007 16:10:00 +0200 (CEST) Subject: [Ekiga-list] ekiga on windows In-Reply-To: <001401c7ee62$9c1f9670$8119fea9@sbb01.spoc.global> Message-ID: <20070904141001.0C26B8FF70@dd14228.kasserver.com> hello, i have the webcam working with 2.0.10 (logitech) on windows xp - but now i have a sound problem the microphone is working correct with the logitech application when i use the usb mircophone from the webcam a have verry bad backroundnois (like a brummm) any help would be great holli From mcs1 at ntlworld.com Tue Sep 4 19:05:37 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Tue, 4 Sep 2007 20:05:37 +0100 (BST) Subject: [Ekiga-list] ekiga on windows In-Reply-To: <20070904141001.0C26B8FF70@dd14228.kasserver.com> References: <20070904141001.0C26B8FF70@dd14228.kasserver.com> Message-ID: <18945918.51188932737459.OPEN-XCHANGE.WebMail.nobody@sam> This improves using a headset with mic! With my built in mic from the logitech cam/speakers this is also really bad on debian Also use the PCMU/PCMA? codec, that improved it for me as well. Cheers Michael On Tue 04.09.2007 15:10, holli at holli.at wrote: >hello, > >i have the webcam working with 2.0.10 (logitech) on windows xp - but >now i have a sound problem the microphone is working correct with the >logitech application when i use the usb mircophone from the webcam a >have verry bad backroundnois (like a brummm) > >any help would be great > >holli > > > > >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From mshahwan2001 at yahoo.com Tue Sep 4 21:06:52 2007 From: mshahwan2001 at yahoo.com (Michael) Date: Tue, 4 Sep 2007 14:06:52 -0700 (PDT) Subject: [Ekiga-list] quality call Message-ID: <462503.72994.qm@web52411.mail.re2.yahoo.com> Ladies and Gentlemen: Noticed that during the first 2 seconds of the call the quality is perfect. Then after the two seconds it drops down to a cell phone call quality. This occurs when I try G711 or GSM. It is understood GSM suppose to sound like a cell phone call. But the first two seconds it is really clear. To avoid it we switched to G711, but the exact same thing happened. Two seconds crystal clear and drops down to a cell phone quality call. So it is not the codec. This only happens with the Ekiga soft phone. The other soft phones do not have these problems running on Windows. Any ideas what could be the cause? We are using 64bit Xubuntu 7.04 with Ekiga 2.0.9 on a USB Plantronics DSP-400 microphone headset. ____________________________________________________________________________________ Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool. http://autos.yahoo.com/carfinder/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Sep 4 21:15:11 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 04 Sep 2007 23:15:11 +0200 Subject: [Ekiga-list] quality call In-Reply-To: <462503.72994.qm@web52411.mail.re2.yahoo.com> References: <462503.72994.qm@web52411.mail.re2.yahoo.com> Message-ID: <1188940511.3932.18.camel@scorpion> Hi, Le mardi 04 septembre 2007 ? 14:06 -0700, Michael a ?crit : > Ladies and Gentlemen: > > > > Noticed that during the first 2 seconds of the call the quality is > perfect. Then after the two seconds it drops down to a cell phone call > quality. This occurs when I try G711 or GSM. > > > > It is understood GSM suppose to sound like a cell phone call. But the > first two seconds it is really clear. To avoid it we switched to G711, > but the exact same thing happened. Two seconds crystal clear and > drops down to a cell phone quality call. So it is not the codec. > > > > This only happens with the Ekiga soft phone. The other soft phones do > not have these problems running on Windows. Any ideas what could be > the cause? > > > > We are using 64bit Xubuntu 7.04 with Ekiga 2.0.9 on a USB Plantronics > DSP-400 microphone headset. > The ideal is to isolate if the problem comes from Ekiga Linux or Ekiga WIN32. Could both Ekiga call 500 at ekiga.net ? Which one of them can reproduce the problem ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From holli at holli.at Tue Sep 4 22:23:18 2007 From: holli at holli.at (HOLLI.AT) Date: Wed, 5 Sep 2007 00:23:18 +0200 Subject: [Ekiga-list] ekiga on windows References: <20070904141001.0C26B8FF70@dd14228.kasserver.com> <18945918.51188932737459.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <000601c7ef42$34407cf0$8119fea9@sbb01.spoc.global> hello, i tried this but it doesn't help - i connected a bluetooth headset and i tried all codecs i always have this brumm on the speaker - it makes it absolute useless to use the microphone... any help would be great. holli ----- Original Message ----- From: "Michael Stockenhuber" To: "Ekiga mailing list" Sent: Tuesday, September 04, 2007 9:05 PM Subject: Re: [Ekiga-list] ekiga on windows > This improves using a headset with mic! > With my built in mic from the logitech cam/speakers this is also really > bad on debian > Also use the PCMU/PCMA codec, that improved it for me as well. > Cheers > Michael > > > > On Tue 04.09.2007 15:10, holli at holli.at wrote: > >>hello, >> >>i have the webcam working with 2.0.10 (logitech) on windows xp - but >>now i have a sound problem the microphone is working correct with the >>logitech application when i use the usb mircophone from the webcam a >>have verry bad backroundnois (like a brummm) >> >>any help would be great >> >>holli >> >> >> >> >>_______________________________________________ >>ekiga-list mailing list >>ekiga-list at gnome.org >>http://mail.gnome.org/mailman/listinfo/ekiga-list > Powered by Open-Xchange.com > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From mcs1 at ntlworld.com Wed Sep 5 07:25:42 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Wed, 5 Sep 2007 08:25:42 +0100 (BST) Subject: [Ekiga-list] libldap.dll In-Reply-To: <46DCF37C.3020003@free.fr> References: <3278348.31188846186887.OPEN-XCHANGE.WebMail.nobody@sam> <46DCF37C.3020003@free.fr> Message-ID: <20526817.71188977142472.OPEN-XCHANGE.WebMail.nobody@sam> Ahem.. Not sure I understand... I renamed the libldap_r.dll into libldap.dll and it starts. Latest version (20070905) does not show a picture from the own cam on standby, but works on 500 at ekiga.net. Also same game with vista, dying once a call is made. Cheers Michael On Tue 04.09.2007 06:56, Julien Puydt wrote: >Michael Stockenhuber a ?crit : >>Using the new win32 snapshot (20070903) I get libldap.dll not found >>(vista again!!). >>Anyone knows a link for the library? > >Eh, we don't depend on libldap.dll through pwlib, but we still depend >on >it, directly! > >So the libldap.dll should be added back to the archive :-) > >Snark >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From dsandras at seconix.com Wed Sep 5 10:58:03 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 05 Sep 2007 12:58:03 +0200 Subject: [Ekiga-list] ekiga on windows In-Reply-To: <000601c7ef42$34407cf0$8119fea9@sbb01.spoc.global> References: <20070904141001.0C26B8FF70@dd14228.kasserver.com> <18945918.51188932737459.OPEN-XCHANGE.WebMail.nobody@sam> <000601c7ef42$34407cf0$8119fea9@sbb01.spoc.global> Message-ID: <1188989883.4258.4.camel@scorpion> Hi, Does it work during the echo test ? Le mercredi 05 septembre 2007 ? 00:23 +0200, HOLLI.AT a ?crit : > hello, > > i tried this but it doesn't help - i connected a bluetooth headset and i > tried all codecs i always have this brumm on the speaker - it makes it > absolute useless to use the microphone... > > any help would be great. > > holli > > ----- Original Message ----- > From: "Michael Stockenhuber" > To: "Ekiga mailing list" > Sent: Tuesday, September 04, 2007 9:05 PM > Subject: Re: [Ekiga-list] ekiga on windows > > > > This improves using a headset with mic! > > With my built in mic from the logitech cam/speakers this is also really > > bad on debian > > Also use the PCMU/PCMA codec, that improved it for me as well. > > Cheers > > Michael > > > > > > > > On Tue 04.09.2007 15:10, holli at holli.at wrote: > > > >>hello, > >> > >>i have the webcam working with 2.0.10 (logitech) on windows xp - but > >>now i have a sound problem the microphone is working correct with the > >>logitech application when i use the usb mircophone from the webcam a > >>have verry bad backroundnois (like a brummm) > >> > >>any help would be great > >> > >>holli > >> > >> > >> > >> > >>_______________________________________________ > >>ekiga-list mailing list > >>ekiga-list at gnome.org > >>http://mail.gnome.org/mailman/listinfo/ekiga-list > > Powered by Open-Xchange.com > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From cm at blinkenlichten.de Wed Sep 5 12:56:18 2007 From: cm at blinkenlichten.de (Carsten Maass) Date: Wed, 05 Sep 2007 14:56:18 +0200 Subject: [Ekiga-list] quality call In-Reply-To: <462503.72994.qm@web52411.mail.re2.yahoo.com> References: <462503.72994.qm@web52411.mail.re2.yahoo.com> Message-ID: <46DEA772.80204@blinkenlichten.de> Hello Michael, Michael wrote: > Noticed that during the first 2 seconds of the call the quality is > perfect. Then after the two seconds it drops down to a cell phone call > quality. This occurs when I try G711 or GSM. I had the same problem here. The solution was to turn off echo-cancellation in the audio-codecs setup screen. Greetings, Carsten. From ml.mildred593 at online.fr Wed Sep 5 21:57:40 2007 From: ml.mildred593 at online.fr (Mildred) Date: Wed, 5 Sep 2007 21:57:40 +0000 Subject: [Ekiga-list] segfault - svn Message-ID: <20070905215740.184998ca@kylae> Hi, I just compiled the svn version of ekiga (because I need the fix to be able to cann someone at freephonie.org that don't like when ekiga uses multiples ports, apparently) But now if I try to run it, I have some glib errors followed by a segfault: (process:30783): GLib-GObject-CRITICAL **: gtype.c:2242: initialization assertion failed, use IA__g_type_init() prior to this function (process:30783): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed (process:30783): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT (object)' failed zsh: segmentation fault ekiga I wonder if I did something wrong (and in this case, I seek help) or if it is just the repository that is broken. But I doubt it is that because I compiled revisions 5509 and 5512, there is the same problem. I think it might be some gconf problem. Because I didn't 'make install' as root (I don't like to install things on my system I don't know where). In fact I used the DESTDIR variable to install it in a local directory to create some ArchLinux package and install it this way. During the make install process, I had many errors like this one (an error for each locale): WARNING: failed to install schema `/schemas/apps/ekiga/devices/video/enable_preview' locale `C': Can't overwrite existing read-only value: Value for `/schemas/apps/ekiga/devices/video/enable_preview' set in a read-only source at the front of your configuration path ... and then ... WARNING: failed to install schema `/schemas/apps/ekiga/general/user_interface/audio_settings_window/size' locale `ca': Unable to store a value at key '/schemas/apps/ekiga/general/user_interface/audio_settings_window/size', as the configuration server has no writable databases. There are some common causes of this problem: 1) your configuration path file /etc/gconf/2/path doesn't contain any databases or wasn't found 2) somehow we mistakenly created two gconfd processes 3) your operating system is misconfigured so NFS file locking doesn't work in your home directory or 4) your NFS client machine crashed and didn't properly notify the server on reboot that file locks should be dropped. If you have two gconfd processes (or had two at the time the second was launched), logging out, killing all copies of gconfd, and logging back in may help. If you have stale locks, remove ~/.gconf*/*lock. Perhaps the problem is that you attempted to use GConf from two machines at once, and ORBit still has its default configuration that prevents remote CORBA connections - put "ORBIIOPIPv4=1" in /etc/orbitrc. As always, check the user.* syslog for details on problems gconfd encountered. There can only be one gconfd per home directory, and it must own a lockfile in ~/.gconfd and also lockfiles in individual storage locations such as ~/.gconf But instead, after the make install I create a file ekiga.schamas that contains all schemas that should have been installed in /etc/gconf/schemas And when I install my package, I run the following commands: - gconftool-2 --makefile-install-rule ekiga.schemas - scrollkeeper-update -q -p var/lib/scrollkeeper - update-desktop-database -q I have no idea what these commands do, i just took them from the existing ekiga package. Can you help me solving that issue ? Thanks Mildred -- Mildred Ki'lya Site: XMPP: (GoogleTalk, Jabber) GPG: 197C A7E6 645B 4299 6D37 684B 6F9D A8D6 [9A7D 2E2B] From jpuydt at free.fr Thu Sep 6 04:37:22 2007 From: jpuydt at free.fr (Julien Puydt) Date: Thu, 06 Sep 2007 06:37:22 +0200 Subject: [Ekiga-list] segfault - svn In-Reply-To: <20070905215740.184998ca@kylae> References: <20070905215740.184998ca@kylae> Message-ID: <46DF8402.7010305@free.fr> Mildred a ?crit : > I just compiled the svn version of ekiga (because I need the fix to be > able to cann someone at freephonie.org that don't like when ekiga uses > multiples ports, apparently) > > But now if I try to run it, I have some glib errors followed by a > segfault: svn trunk is pretty unstable right now, with breaks coming alternatively from pwlib, opal and ekiga. That's the downside of having many new features coming in fast ;-) Doesn't the gnome-2-20 branch (future ekiga 2.0.10) have what's needed already? Snark on #ekiga From dsandras at seconix.com Thu Sep 6 06:46:25 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 06 Sep 2007 08:46:25 +0200 Subject: [Ekiga-list] segfault - svn In-Reply-To: <46DF8402.7010305@free.fr> References: <20070905215740.184998ca@kylae> <46DF8402.7010305@free.fr> Message-ID: <1189061185.3906.0.camel@scorpion> Le jeudi 06 septembre 2007 ? 06:37 +0200, Julien Puydt a ?crit : > Mildred a ?crit : > > > I just compiled the svn version of ekiga (because I need the fix to be > > able to cann someone at freephonie.org that don't like when ekiga uses > > multiples ports, apparently) > > > > But now if I try to run it, I have some glib errors followed by a > > segfault: > > svn trunk is pretty unstable right now, with breaks coming alternatively > from pwlib, opal and ekiga. That's the downside of having many new > features coming in fast ;-) > > Doesn't the gnome-2-20 branch (future ekiga 2.0.10) have what's needed > already? > Current CVS HEAD works again... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jpuydt at free.fr Thu Sep 6 10:53:20 2007 From: jpuydt at free.fr (Julien Puydt) Date: Thu, 06 Sep 2007 12:53:20 +0200 Subject: [Ekiga-list] Ekiga In-Reply-To: References: Message-ID: <46DFDC20.7000701@free.fr> Joe Borg a ?crit : > I discovered Ekiga in Linux, then stared introducing it at work to test our > asterisk servers. Now I want to use it personally. I have an account, but > when I enter my login details, it always fails. Does it fail too if you enter them in the web interface? > And when I try to call > 500 at ekiga.net, it just says 'Security Failed' Normal : not registered implies you can't call 500. Snark on #ekiga From jpuydt at free.fr Thu Sep 6 10:56:26 2007 From: jpuydt at free.fr (Julien Puydt) Date: Thu, 06 Sep 2007 12:56:26 +0200 Subject: [Ekiga-list] ekiga d-bus hook In-Reply-To: <200708312103.33632.mluisser@gmail.com> References: <200708312103.33632.mluisser@gmail.com> Message-ID: <46DFDCDA.6020402@free.fr> Markus Luisser a ?crit : > Hi folks! > > I`d like to connect my PIM suite (I use kde - kontact for the moment) to ekiga > phone. In kontact I have the possibility to issue an arbitrary (shell) > command when I klick on a SIP address. > > I`m looking for a way to write a small program/script that takes a SIP adress > as argument from kontact and passes it on to a running ekiga phone instance > to automatically make a call to the SIP adress. > > AFAICS the way to do it is via a d-bus communication with the running ekiga > process. > > First question: am I on the proper track with that? > > If yes, I`d be grateful if someone could point me to more information on how > to use d-bus to communicate with ekiga. > > If no, what can I do to implement something like this? Sorry, it seems I missed your message, which is now more than a week old. You can do what you want in two ways : - either call "ekiga -c sip:foo at bar.net" ; - or indeed use DBUS do that -- see the file using_dbus.html in ekiga's distribution. Snark on #ekiga From jpuydt at free.fr Thu Sep 6 10:51:50 2007 From: jpuydt at free.fr (Julien Puydt) Date: Thu, 06 Sep 2007 12:51:50 +0200 Subject: [Ekiga-list] Registration Failed: Timeout In-Reply-To: <12243780.post@talk.nabble.com> References: <12243780.post@talk.nabble.com> Message-ID: <46DFDBC6.9020801@free.fr> Tabgok a ?crit : > I know that this is a common problem - and I've searched through these > forums and about 50 others while trying to find a solution. I am unable to > "register" either my Ekiga account or my Gizmo account in the Ekiga > software. > > I ran the configuration druid for Ekiga in order to connect (I have > registered with Ekiga and can log into ekiga.net with not problems). The > NAT Test returns "STUN test result: No NAT. You do not seem to be using a > NAT router. STUN support is not required." Which is what I expected. I am > connecting to the internet through a LAN connection in the dorm at school. > As a side note, I HAVE tried the different NAT configurations (None, STUN, > and IP Translation) all to no avail even after restart. You shouldn't have expected having no NAT if you're connected through a LAN. Try to enable STUN anyway. Snark on #ekiga From dsandras at seconix.com Thu Sep 6 13:08:09 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 06 Sep 2007 15:08:09 +0200 Subject: [Ekiga-list] Setting RFC2833 in H.323 In-Reply-To: <1186351225.2469.17.camel@worky2.164.net> References: <1186351225.2469.17.camel@worky2.164.net> Message-ID: <1189084089.4200.2.camel@scorpion> Hi, Le dimanche 05 ao?t 2007 ? 23:00 +0100, Fergus Kernan a ?crit : > Hi, > > Is it possible to force EKIGA to use only RFC2833 on H323 connections? Unfortunately not. > It seems it will advertise it's capability as any of the H245 methods > but will not use RFC2833 when selected in the H323 settings. I am trying > to simulate a Nextone which will only use RFC2833 working in an Asterisk > gateway using OH323 setup for RFC2833 -- it seems that Ekiga will > always select the H245 methods for UserInputCapability on the H225 > channel rather than reading it's own capability setting (RFC2833) and is > not sending the DTMF as NetworkTelphonyEvents in the RTP path. As of > H323 version 4 RTP NTE (RFC2833) is an acceptable method for sending > DTMF. Thanks for in advance for any guidance > > EKIGA Version 2.0.3 binary on SUSE10.2 > EKIGA Version 2.0.9 complied with OpenH323 v1.18.0/PWLIB v1.10.0 on > Ubuntu 7.04 all experience the same result > That is weird... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Sep 6 13:09:48 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 06 Sep 2007 15:09:48 +0200 Subject: [Ekiga-list] Ekiga and vista In-Reply-To: <11050211.81188209248576.OPEN-XCHANGE.WebMail.nobody@sam> References: <12468716.31188065271168.OPEN-XCHANGE.WebMail.nobody@sam> <36196.72.165.32.190.1188167245.squirrel@nano.psu.edu> <1188200921.3907.6.camel@scorpion> <23690087.61188202847976.OPEN-XCHANGE.WebMail.nobody@sam> <1188204059.4741.9.camel@scorpion> <11050211.81188209248576.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <1189084188.4200.4.camel@scorpion> Le lundi 27 ao?t 2007 ? 11:07 +0100, Michael Stockenhuber a ?crit : > On Mon 27.08.2007 09:40, Damien Sandras wrote: > > Hi, > > Thank you again. I enclose the log as described in the wiki! > > I hope that will help to debug! > What we need is a gdb output. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From luc at saillard.org Thu Sep 6 13:18:09 2007 From: luc at saillard.org (Luc Saillard) Date: Thu, 6 Sep 2007 15:18:09 +0200 Subject: [Ekiga-list] Ekiga and vista In-Reply-To: <1189084188.4200.4.camel@scorpion> References: <12468716.31188065271168.OPEN-XCHANGE.WebMail.nobody@sam> <36196.72.165.32.190.1188167245.squirrel@nano.psu.edu> <1188200921.3907.6.camel@scorpion> <23690087.61188202847976.OPEN-XCHANGE.WebMail.nobody@sam> <1188204059.4741.9.camel@scorpion> <11050211.81188209248576.OPEN-XCHANGE.WebMail.nobody@sam> <1189084188.4200.4.camel@scorpion> Message-ID: <20070906131809.GB29506@sd-11162.dedibox.fr> On Thu, Sep 06, 2007 at 03:09:48PM +0200, Damien Sandras wrote: > Le lundi 27 ao?t 2007 ? 11:07 +0100, Michael Stockenhuber a ?crit : > > On Mon 27.08.2007 09:40, Damien Sandras wrote: > > > > Hi, > > > > Thank you again. I enclose the log as described in the wiki! > > > > I hope that will help to debug! > > > > What we need is a gdb output. or a windows vista ... I've made most of my dev for video plugin using a terminal server connection using rdesktop or vnc. I hope to find time next week to resolv this bug. Luc From w.g1988 at gmx.at Thu Sep 6 15:12:28 2007 From: w.g1988 at gmx.at (w.g1988 at gmx.at) Date: Thu, 06 Sep 2007 17:12:28 +0200 Subject: [Ekiga-list] Ekiga can't play my Asterisk Sounds Message-ID: <20070906151228.321990@gmx.net> Hi! I have a problem with Ekiga! It can't play any Voicemail, Playback or Background Sounds which are provided in Asterisk! When I do the same with X-Lite it works! I changed the port from 5060 to 5061, maybe that could be a reason, or maybe because a RTP Stream can't be established. I don't know, but it's important to know why this happens! Thank you for your help! -- Psssst! Schon vom neuen GMX MultiMessenger geh?rt? Der kanns mit allen: http://www.gmx.net/de/go/multimessenger From dsandras at seconix.com Thu Sep 6 15:21:27 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 06 Sep 2007 17:21:27 +0200 Subject: [Ekiga-list] Ekiga can't play my Asterisk Sounds In-Reply-To: <20070906151228.321990@gmx.net> References: <20070906151228.321990@gmx.net> Message-ID: <1189092087.4200.20.camel@scorpion> Hi, Le jeudi 06 septembre 2007 ? 17:12 +0200, w.g1988 at gmx.at a ?crit : > Hi! > > I have a problem with Ekiga! > > It can't play any Voicemail, Playback or Background Sounds which are provided in Asterisk! When I do the same with X-Lite it works! > > I changed the port from 5060 to 5061, maybe that could be a reason, or maybe because a RTP Stream can't be established. I don't know, but it's important to know why this happens! > > Thank you for your help! We need a debug output. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From mcs1 at ntlworld.com Fri Sep 7 06:33:14 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Fri, 7 Sep 2007 07:33:14 +0100 (BST) Subject: [Ekiga-list] Ekiga and vista In-Reply-To: <20070906131809.GB29506@sd-11162.dedibox.fr> References: <12468716.31188065271168.OPEN-XCHANGE.WebMail.nobody@sam> <36196.72.165.32.190.1188167245.squirrel@nano.psu.edu> <1188200921.3907.6.camel@scorpion> <23690087.61188202847976.OPEN-XCHANGE.WebMail.nobody@sam> <1188204059.4741.9.camel@scorpion> <11050211.81188209248576.OPEN-XCHANGE.WebMail.nobody@sam> <1189084188.4200.4.camel@scorpion> <20070906131809.GB29506@sd-11162.dedibox.fr> Message-ID: <6888942.81189146794418.OPEN-XCHANGE.WebMail.nobody@sam> Thank you for the reply I would ahppily run ekiga with gdb, but for some reason I do not get any output. I did it exactly as described in the wiki (http://wiki.ekiga.org/index.php/Debugging_Ekiga) If someone could give advice, I can try again! Cheers Michael On Thu 06.09.2007 14:18, Luc Saillard wrote: >On Thu, Sep 06, 2007 at 03:09:48PM +0200, Damien Sandras wrote: >>Le lundi 27 ao?t 2007 ? 11:07 +0100, Michael Stockenhuber a ?crit : >>>On Mon 27.08.2007 09:40, Damien Sandras wrote: >>> >>>Hi, >>> >>>Thank you again. I enclose the log as described in the wiki! >>> >>>I hope that will help to debug! >>> >> >>What we need is a gdb output. > >or a windows vista ... I've made most of my dev for video plugin using >a >terminal server connection using rdesktop or vnc. I hope to find time >next >week to resolv this bug. > >Luc >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From domi at vision.ee.ethz.ch Fri Sep 7 07:36:19 2007 From: domi at vision.ee.ethz.ch (Dominik Szczerba) Date: Fri, 07 Sep 2007 09:36:19 +0200 Subject: [Ekiga-list] audio choking Message-ID: <46E0FF73.3090009@vision.ee.ethz.ch> Hi, I tried ekiga on debian testing with wireless broadband connection. I could hear the lady in the test call talking and I could hear myself back. However, the voices were heavily deformed (choking). I tried changing the codecs to no luck. Any ideas what's wrong? Thanks -- Dominik -- Dominik Szczerba, Ph.D. Computer Vision Lab CH-8092 Zurich http://www.vision.ee.ethz.ch/~domi From craigs at postincrement.com Fri Sep 7 08:11:51 2007 From: craigs at postincrement.com (Craig Southeren) Date: Fri, 07 Sep 2007 18:11:51 +1000 Subject: [Ekiga-list] Setting RFC2833 in H.323 In-Reply-To: <1186351225.2469.17.camel@worky2.164.net> References: <1186351225.2469.17.camel@worky2.164.net> Message-ID: <46E107C7.7010700@postincrement.com> Fergus Kernan wrote: > Hi, > > Is it possible to force EKIGA to use only RFC2833 on H323 connections? > It seems it will advertise it's capability as any of the H245 methods > but will not use RFC2833 when selected in the H323 settings. I am trying > to simulate a Nextone which will only use RFC2833 working in an Asterisk > gateway using OH323 setup for RFC2833 -- it seems that Ekiga will > always select the H245 methods for UserInputCapability on the H225 > channel rather than reading it's own capability setting (RFC2833) and is > not sending the DTMF as NetworkTelphonyEvents in the RTP path. As of > H323 version 4 RTP NTE (RFC2833) is an acceptable method for sending > DTMF. Thanks for in advance for any guidance OPAL has support for RFC2833 in both H.323 and SIP. I'm not sure if Ekiga has the ability to enable this. Craig ----------------------------------------------------------------------- Craig Southeren Post Increment ? VoIP Consulting and Software craigs at postincrement.com.au www.postincrement.com.au Phone: +61 243654666 ICQ: #86852844 Fax: +61 243656905 MSN: craig_southeren at hotmail.com Mobile: +61 417231046 Jabber: craigs at jabber.org "Science is the poetry of reality." Richard Dawkins From jpuydt at free.fr Fri Sep 7 11:03:21 2007 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 07 Sep 2007 13:03:21 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <46E0FF73.3090009@vision.ee.ethz.ch> References: <46E0FF73.3090009@vision.ee.ethz.ch> Message-ID: <46E12FF9.1010702@free.fr> Dominik Szczerba a ?crit : > I tried ekiga on debian testing with wireless broadband connection. > I could hear the lady in the test call talking and I could hear myself > back. However, the voices were heavily deformed (choking). I tried > changing the codecs to no luck. Any ideas what's wrong? There can be several things : (1) was video enabled ? [video can take much bandwith] (2) is the connection good enough? [good bandwith isn't enough for good sound quality : one needs a very regular bandwith] Snark on #ekiga From domi at vision.ee.ethz.ch Fri Sep 7 11:38:05 2007 From: domi at vision.ee.ethz.ch (Dominik Szczerba) Date: Fri, 07 Sep 2007 13:38:05 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <46E12FF9.1010702@free.fr> References: <46E0FF73.3090009@vision.ee.ethz.ch> <46E12FF9.1010702@free.fr> Message-ID: <46E1381D.8020106@vision.ee.ethz.ch> Hi, Thanks for an answer. Pls see below. Julien Puydt wrote: > Dominik Szczerba a ?crit : >> I tried ekiga on debian testing with wireless broadband connection. >> I could hear the lady in the test call talking and I could hear myself >> back. However, the voices were heavily deformed (choking). I tried >> changing the codecs to no luck. Any ideas what's wrong? > > There can be several things : > (1) was video enabled ? [video can take much bandwith] no, is disabled. > (2) is the connection good enough? [good bandwith isn't enough for good > sound quality : one needs a very regular bandwith] I dont believe this is the connection as I tried with a few (e.g. with a very high quality wired connection at work). Anyway, how can I measure this? It is good enough for skype. I would be very glad to hear some more debugging suggestions. Thanks a lot -- Dominik > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Dominik Szczerba, Ph.D. Computer Vision Lab CH-8092 Zurich http://www.vision.ee.ethz.ch/~domi From dsandras at seconix.com Fri Sep 7 11:47:57 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 07 Sep 2007 13:47:57 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <46E1381D.8020106@vision.ee.ethz.ch> References: <46E0FF73.3090009@vision.ee.ethz.ch> <46E12FF9.1010702@free.fr> <46E1381D.8020106@vision.ee.ethz.ch> Message-ID: <1189165677.9935.0.camel@scorpion> Le vendredi 07 septembre 2007 ? 13:38 +0200, Dominik Szczerba a ?crit : > Hi, > Thanks for an answer. Pls see below. > > Julien Puydt wrote: > > Dominik Szczerba a ?crit : > >> I tried ekiga on debian testing with wireless broadband connection. > >> I could hear the lady in the test call talking and I could hear myself > >> back. However, the voices were heavily deformed (choking). I tried > >> changing the codecs to no luck. Any ideas what's wrong? > > > > There can be several things : > > (1) was video enabled ? [video can take much bandwith] > > no, is disabled. > > > (2) is the connection good enough? [good bandwith isn't enough for good > > sound quality : one needs a very regular bandwith] > > I dont believe this is the connection as I tried with a few (e.g. with a > very high quality wired connection at work). Anyway, how can I measure > this? It is good enough for skype. I would be very glad to hear some > more debugging suggestions. can you post a -d 4 output somewhere ? Not on the mailing list and not through a private e-mail, if possible. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From domi at vision.ee.ethz.ch Fri Sep 7 12:25:04 2007 From: domi at vision.ee.ethz.ch (Dominik Szczerba) Date: Fri, 07 Sep 2007 14:25:04 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <1189165677.9935.0.camel@scorpion> References: <46E0FF73.3090009@vision.ee.ethz.ch> <46E12FF9.1010702@free.fr> <46E1381D.8020106@vision.ee.ethz.ch> <1189165677.9935.0.camel@scorpion> Message-ID: <46E14320.3050807@vision.ee.ethz.ch> The debug log is here http://www.vision.ee.ethz.ch/~domi/tmp/ekiga.log BTW. I discovered another strange thing: I set audio to ALSA but ekiga refuses to make a test call with xmms playing in bg (skype does not care). I would be glad to find a solution, Regards - Dominik Damien Sandras wrote: > Le vendredi 07 septembre 2007 ? 13:38 +0200, Dominik Szczerba a ?crit : >> Hi, >> Thanks for an answer. Pls see below. >> >> Julien Puydt wrote: >>> Dominik Szczerba a ?crit : >>>> I tried ekiga on debian testing with wireless broadband connection. >>>> I could hear the lady in the test call talking and I could hear myself >>>> back. However, the voices were heavily deformed (choking). I tried >>>> changing the codecs to no luck. Any ideas what's wrong? >>> There can be several things : >>> (1) was video enabled ? [video can take much bandwith] >> no, is disabled. >> >>> (2) is the connection good enough? [good bandwith isn't enough for good >>> sound quality : one needs a very regular bandwith] >> I dont believe this is the connection as I tried with a few (e.g. with a >> very high quality wired connection at work). Anyway, how can I measure >> this? It is good enough for skype. I would be very glad to hear some >> more debugging suggestions. > > can you post a -d 4 output somewhere ? > > Not on the mailing list and not through a private e-mail, if possible. -- Dominik Szczerba, Ph.D. Computer Vision Lab CH-8092 Zurich http://www.vision.ee.ethz.ch/~domi From dsandras at seconix.com Fri Sep 7 12:33:23 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 07 Sep 2007 14:33:23 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <46E14320.3050807@vision.ee.ethz.ch> References: <46E0FF73.3090009@vision.ee.ethz.ch> <46E12FF9.1010702@free.fr> <46E1381D.8020106@vision.ee.ethz.ch> <1189165677.9935.0.camel@scorpion> <46E14320.3050807@vision.ee.ethz.ch> Message-ID: <1189168403.9935.5.camel@scorpion> Le vendredi 07 septembre 2007 ? 14:25 +0200, Dominik Szczerba a ?crit : > The debug log is here > > http://www.vision.ee.ethz.ch/~domi/tmp/ekiga.log > > BTW. I discovered another strange thing: I set audio to ALSA but ekiga > refuses to make a test call with xmms playing in bg (skype does not care). You have to use DEFAULT device so it works. But the version you are using is antic. You should upgrade, plenty of stuff has been updated since Ekiga 2.0.3 was released 2 years ago. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From domi at vision.ee.ethz.ch Fri Sep 7 13:36:58 2007 From: domi at vision.ee.ethz.ch (Dominik Szczerba) Date: Fri, 07 Sep 2007 15:36:58 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <1189168403.9935.5.camel@scorpion> References: <46E0FF73.3090009@vision.ee.ethz.ch> <46E12FF9.1010702@free.fr> <46E1381D.8020106@vision.ee.ethz.ch> <1189165677.9935.0.camel@scorpion> <46E14320.3050807@vision.ee.ethz.ch> <1189168403.9935.5.camel@scorpion> Message-ID: <46E153FA.4000701@vision.ee.ethz.ch> Hi, I changed the devices to default and the problem persists. I have put a new log to the previously given link. Well yes debian even testing has antic packages. I will try to build it myself (but that usually does not work smoothly) Regards -- Dominik Damien Sandras wrote: > Le vendredi 07 septembre 2007 ? 14:25 +0200, Dominik Szczerba a ?crit : >> The debug log is here >> >> http://www.vision.ee.ethz.ch/~domi/tmp/ekiga.log >> >> BTW. I discovered another strange thing: I set audio to ALSA but ekiga >> refuses to make a test call with xmms playing in bg (skype does not care). > > > You have to use DEFAULT device so it works. > > But the version you are using is antic. You should upgrade, plenty of > stuff has been updated since Ekiga 2.0.3 was released 2 years ago. -- Dominik Szczerba, Ph.D. Computer Vision Lab CH-8092 Zurich http://www.vision.ee.ethz.ch/~domi From dsandras at seconix.com Fri Sep 7 13:41:44 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 07 Sep 2007 15:41:44 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <46E153FA.4000701@vision.ee.ethz.ch> References: <46E0FF73.3090009@vision.ee.ethz.ch> <46E12FF9.1010702@free.fr> <46E1381D.8020106@vision.ee.ethz.ch> <1189165677.9935.0.camel@scorpion> <46E14320.3050807@vision.ee.ethz.ch> <1189168403.9935.5.camel@scorpion> <46E153FA.4000701@vision.ee.ethz.ch> Message-ID: <1189172504.9935.8.camel@scorpion> Le vendredi 07 septembre 2007 ? 15:36 +0200, Dominik Szczerba a ?crit : > Hi, > > I changed the devices to default and the problem persists. I have put a > new log to the previously given link. > > Well yes debian even testing has antic packages. I will try to build it > myself (but that usually does not work smoothly) > Jitter buffer size increased to 4000 (500ms) That is the reason of your problem. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From domi at vision.ee.ethz.ch Fri Sep 7 14:12:00 2007 From: domi at vision.ee.ethz.ch (Dominik Szczerba) Date: Fri, 07 Sep 2007 16:12:00 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <1189172504.9935.8.camel@scorpion> References: <46E0FF73.3090009@vision.ee.ethz.ch> <46E12FF9.1010702@free.fr> <46E1381D.8020106@vision.ee.ethz.ch> <1189165677.9935.0.camel@scorpion> <46E14320.3050807@vision.ee.ethz.ch> <1189168403.9935.5.camel@scorpion> <46E153FA.4000701@vision.ee.ethz.ch> <1189172504.9935.8.camel@scorpion> Message-ID: <46E15C30.8070605@vision.ee.ethz.ch> I increased it to (maximum allowed 1000) and still the same problem. As I expected, I am unable to compile ekiga from source: ../lib/.libs/libekiga.a(gmcontacts-ldap.o): In function `gnomemeeting_ldap_addressbook_get_contacts': /home/domel/pack/ekiga-2.0.9/lib/gmcontacts/gmcontacts-ldap.cpp:164: undefined reference to `PLDAPSession::PLDAPSession(PString const&)' Looks like newer ldap is needed than I have in my system. -- Dominik Damien Sandras wrote: > Le vendredi 07 septembre 2007 ? 15:36 +0200, Dominik Szczerba a ?crit : >> Hi, >> >> I changed the devices to default and the problem persists. I have put a >> new log to the previously given link. >> >> Well yes debian even testing has antic packages. I will try to build it >> myself (but that usually does not work smoothly) >> > > Jitter buffer size increased to 4000 (500ms) > > That is the reason of your problem. > -- Dominik Szczerba, Ph.D. Computer Vision Lab CH-8092 Zurich http://www.vision.ee.ethz.ch/~domi From sevmek at free.fr Fri Sep 7 15:41:06 2007 From: sevmek at free.fr (yannick) Date: Fri, 07 Sep 2007 17:41:06 +0200 Subject: [Ekiga-list] audio choking In-Reply-To: <46E15C30.8070605@vision.ee.ethz.ch> References: <46E0FF73.3090009@vision.ee.ethz.ch> <46E12FF9.1010702@free.fr> <46E1381D.8020106@vision.ee.ethz.ch> <1189165677.9935.0.camel@scorpion> <46E14320.3050807@vision.ee.ethz.ch> <1189168403.9935.5.camel@scorpion> <46E153FA.4000701@vision.ee.ethz.ch> <1189172504.9935.8.camel@scorpion> <46E15C30.8070605@vision.ee.ethz.ch> Message-ID: <1189179666.351.1.camel@achille> Le vendredi 07 septembre 2007 ? 16:12 +0200, Dominik Szczerba a ?crit : > As I expected, I am unable to compile ekiga from source: > ../lib/.libs/libekiga.a(gmcontacts-ldap.o): In function > `gnomemeeting_ldap_addressbook_get_contacts': > /home/domel/pack/ekiga-2.0.9/lib/gmcontacts/gmcontacts-ldap.cpp:164: > undefined reference to `PLDAPSession::PLDAPSession(PString const&)' > > Looks like newer ldap is needed than I have in my system. > http://wiki.ekiga.org/index.php/Linux_Users http://wiki.ekiga.org/index.php/Talk:Additional_Information Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From mshahwan2001 at yahoo.com Sat Sep 8 04:32:12 2007 From: mshahwan2001 at yahoo.com (Michael) Date: Fri, 7 Sep 2007 21:32:12 -0700 (PDT) Subject: [Ekiga-list] quality call Message-ID: <952950.1932.qm@web52410.mail.re2.yahoo.com> Carsten: Thank you. You saved me at least of 100 hours of frustration. It worked! ----- Original Message ---- From: Carsten Maass To: Ekiga mailing list Sent: Wednesday, September 5, 2007 7:56:18 AM Subject: Re: [Ekiga-list] quality call Hello Michael, Michael wrote: > Noticed that during the first 2 seconds of the call the quality is > perfect. Then after the two seconds it drops down to a cell phone call > quality. This occurs when I try G711 or GSM. I had the same problem here. The solution was to turn off echo-cancellation in the audio-codecs setup screen. Greetings, Carsten. _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list ____________________________________________________________________________________ Moody friends. Drama queens. Your life? Nope! - their life, your story. Play Sims Stories at Yahoo! Games. http://sims.yahoo.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From mshahwan2001 at yahoo.com Sat Sep 8 04:34:29 2007 From: mshahwan2001 at yahoo.com (Michael) Date: Fri, 7 Sep 2007 21:34:29 -0700 (PDT) Subject: [Ekiga-list] call waiting Message-ID: <988867.2548.qm@web52410.mail.re2.yahoo.com> Is there any way to have call waiting to work with Ekiga? So that I can put line 1 on hold and grab line 2? ____________________________________________________________________________________ Need a vacation? Get great deals to amazing places on Yahoo! Travel. http://travel.yahoo.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Sat Sep 8 09:37:32 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 08 Sep 2007 11:37:32 +0200 Subject: [Ekiga-list] call waiting In-Reply-To: <988867.2548.qm@web52410.mail.re2.yahoo.com> References: <988867.2548.qm@web52410.mail.re2.yahoo.com> Message-ID: <1189244252.4054.2.camel@scorpion> Le vendredi 07 septembre 2007 ? 21:34 -0700, Michael a ?crit : > Is there any way to have call waiting to work with Ekiga? So that I > can put line 1 on hold and grab line 2? It is not implemented yet. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From oisin.feeley at gmail.com Sun Sep 9 16:12:36 2007 From: oisin.feeley at gmail.com (Oisin Feeley) Date: Sun, 9 Sep 2007 12:12:36 -0400 Subject: [Ekiga-list] Way to pause before dialing an extension? Message-ID: Hi all, Is there a way to make ekiga pause before dialing an extension? I'm trying to dial a number of the format 1-234-567-8901 ext. 2345 I want to use the Local address book and hopefully not use Asterisk (wonderful though it is). I can dial 1-234-567-8901 and then when I hear the ring at the PBX I can type 2345 on the Ekiga keypad and the call goes through. If I store the number in the local address book as 123456789012345 then I just get a busy signal. Any hints? Best wishes, Ois?n Feeley From dsandras at seconix.com Sun Sep 9 18:20:09 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 09 Sep 2007 20:20:09 +0200 Subject: [Ekiga-list] Way to pause before dialing an extension? In-Reply-To: References: Message-ID: <1189362009.3947.1.camel@scorpion> Hi Oisin, Le dimanche 09 septembre 2007 ? 12:12 -0400, Oisin Feeley a ?crit : > Hi all, > > Is there a way to make ekiga pause before dialing an extension? I'm > trying to dial a number of the format 1-234-567-8901 ext. 2345 > > I want to use the Local address book and hopefully not use Asterisk > (wonderful though it is). > > I can dial 1-234-567-8901 and then when I hear the ring at the PBX I > can type 2345 on the Ekiga keypad and the call goes through. > > If I store the number in the local address book as 123456789012345 > then I just get a busy signal. > It is not possible without doing it at the asterisk level. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From shaini08 at gmail.com Mon Sep 10 06:23:37 2007 From: shaini08 at gmail.com (shaini joseph) Date: Mon, 10 Sep 2007 11:53:37 +0530 Subject: [Ekiga-list] query Message-ID: <36581b10709092323v403a815ek3e48a02043689562@mail.gmail.com> Hello , I have downloaded ekiga-2.0.9-0.fc6.i686.rpm & the 2 corresponding dependencies .When I try to install pwlib following error occurs . Preparing... ########################################### [100%] file /usr/lib/libpt_linux_x86_r.so.1 from install of pwlib-1.10.7-0.fc6 conflicts with file from package pwlib-1.10.1-6.fc6 file /usr/lib/libpt_linux_x86_r.so.1.10 from install of pwlib-1.10.7-0.fc6 conflicts with file from package pwlib-1.10.1-6.fc6 file /usr/lib/pwlib/devices/sound/alsa_pwplugin.so from install of pwlib-1.10.7-0.fc6 conflicts with file from package pwlib-1.10.1-6.fc6 file /usr/lib/pwlib/devices/videoinput/avc_pwplugin.so from install of pwlib-1.10.7-0.fc6 conflicts with file from package pwlib-1.10.1-6.fc6 file /usr/lib/pwlib/devices/videoinput/v4l2_pwplugin.so from install of pwlib-1.10.7-0.fc6 conflicts with file from package pwlib-1.10.1-6.fc6 file /usr/lib/pwlib/devices/videoinput/v4l_pwplugin.so from install of pwlib-1.10.7-0.fc6 conflicts with file from package pwlib-1.10.1-6.fc6 when I try command : rpm -qa | grep ekiga It shows : ekiga-2.0.2-7 rpm -qa | grep pwlib pwlib-1.10.1-6.fc6 rpm -qa | grep opal opal-2.2.2-1.1 It seems ekiga is already installed there r certain files located on different paths like /usr//share/gnome , /usr/share/sounds I'm unable to trace the read me file ? Can u guide as to how to run ekiga softphone Thanks & regards Shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: From gunzera0 at yahoo.com.br Mon Sep 10 11:42:43 2007 From: gunzera0 at yahoo.com.br (Gunther Furtado) Date: Mon, 10 Sep 2007 08:42:43 -0300 Subject: [Ekiga-list] ekiga forgets video settings Message-ID: Hello, This is my first post, so, Hi everyone! Every time I restart ekiga the video settings returns to default values. How do I make it remember? Thank you, -- Gunther Furtado gunzera0 at yahoo.com.br From jpuydt at free.fr Mon Sep 10 15:13:22 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 10 Sep 2007 17:13:22 +0200 Subject: [Ekiga-list] ekiga forgets video settings In-Reply-To: References: Message-ID: <46E55F12.4040100@free.fr> Gunther Furtado a ?crit : > Every time I restart ekiga the video settings returns to default > values. How do I make it remember? Which video settings ? Ekiga stores its configuration in gconf on unix-like systems, and in an XML file on win32. Snark on #ekiga From mario.moles at tiscali.it Mon Sep 10 18:04:33 2007 From: mario.moles at tiscali.it (Mario Moles) Date: Mon, 10 Sep 2007 20:04:33 +0200 Subject: [Ekiga-list] Segmentation fault Message-ID: <200709102004.34408.mario.moles@tiscali.it> My linux-box: debian sid-amd64 kde3.5.7 mario at dhcppc1:~$ ekiga-snapshot (process:7997): GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.14.0/gobject/gtype.c:2242: initialization assertion failed, use IA__g_type_init() prior to this function (process:7997): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT (object_type)' failed (process:7997): GLib-GObject-CRITICAL **: g_object_ref: assertion `G_IS_OBJECT (object)' failed Segmentation fault ???????????? -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Mon Sep 10 18:18:12 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 10 Sep 2007 20:18:12 +0200 Subject: [Ekiga-list] Segmentation fault In-Reply-To: <200709102004.34408.mario.moles@tiscali.it> References: <200709102004.34408.mario.moles@tiscali.it> Message-ID: <46E58A64.9050505@free.fr> Mario Moles a ?crit : > My linux-box: debian sid-amd64 > kde3.5.7 > mario at dhcppc1:~$ ekiga-snapshot There is a snapshot every hour when there are commits... we have no idea which you're using with the information you gave us. Snark on #ekiga From destebani at gmail.com Mon Sep 10 19:23:16 2007 From: destebani at gmail.com (David Esteban) Date: Tue, 11 Sep 2007 04:23:16 +0900 Subject: [Ekiga-list] Registration failed Message-ID: Dear all, I tried during hours make work Ekiga in several machines using Ubuntu. But always i try to configurate an account it always sais:Registration failed : Timeout. I thought at first it was due to my wireless connection, maybe too slow to receive the reply from the server before the time out. But after that i tried DSL and LAN conections and still does not work. The configuration i use is as follows : Account Name : DAVID ESTEBAN Registrar : ekiga.net User : david.esteban (my account is david.esteban at ekiga.net) Password : mypassword DTMF is configured is set at RFC2833 and STUN server is stun.ekiga.net I tried configuring the account thru the Configuration Druid and manually, but it still doesnt work. Can you give me any clue?? Thanks in advance, DAVID ESTEBAN www.desdejapon.es -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Mon Sep 10 19:26:18 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 10 Sep 2007 21:26:18 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: References: Message-ID: <46E59A5A.6070606@free.fr> David Esteban a ?crit : > I tried during hours make work Ekiga in several machines using Ubuntu. But > always i try to configurate an account it always sais:Registration failed : > Timeout. I thought at first it was due to my wireless connection, maybe too > slow to receive the reply from the server before the time out. But after > that i tried DSL and LAN conections and still does not work. > > The configuration i use is as follows : > Account Name : DAVID ESTEBAN > Registrar : ekiga.net > User : david.esteban (my account is david.esteban at ekiga.net) > Password : mypassword > > DTMF is configured is set at RFC2833 and STUN server is stun.ekiga.net > > I tried configuring the account thru the Configuration Druid and manually, > but it still doesnt work. > > Can you give me any clue?? Registration failing because of a timeout can be : 1) the server is really down and doesn't answer ; 2) you have a firewall and the answer didn't find its way back to you. Snark on #ekiga From destebani at gmail.com Mon Sep 10 19:29:48 2007 From: destebani at gmail.com (David Esteban) Date: Tue, 11 Sep 2007 04:29:48 +0900 Subject: [Ekiga-list] Registration failed In-Reply-To: <46E59A5A.6070606@free.fr> References: <46E59A5A.6070606@free.fr> Message-ID: Thanks Julien, Which server do i have to ping to know if it is down or not?? Also will be useful to know it in order to make a traceroute and get where the trace get lost> Thanks again, -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Sep 10 19:33:24 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 10 Sep 2007 21:33:24 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: References: <46E59A5A.6070606@free.fr> Message-ID: <1189452804.3936.14.camel@scorpion> Le mardi 11 septembre 2007 ? 04:29 +0900, David Esteban a ?crit : > Thanks Julien, > Which server do i have to ping to know if it is down or not?? > Also will be useful to know it in order to make a traceroute and get > where the trace get lost> > You could have a provider blocking SIP requests too. You will need to post a -d 4 output somewhere so that we can see if something looks wrong at first sight. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From laurentp at wp.pl Mon Sep 10 19:40:41 2007 From: laurentp at wp.pl (W.P.) Date: Mon, 10 Sep 2007 21:40:41 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: References: Message-ID: <46E59DB9.7080008@wp.pl> U?ytkownik David Esteban napisa?: > Dear all, > > I tried during hours make work Ekiga in several machines using Ubuntu. > But always i try to configurate an account it always sais:Registration > ?failed : Timeout. I thought at first it was due to my wireless > connection, maybe too slow to receive the reply from the server before > the time out. It is not due to wireless connection, I'm registering throu GPRS connection.(much slower) May ekiga.net is down, try again later. W.P. From mario.moles at tiscali.it Mon Sep 10 20:54:48 2007 From: mario.moles at tiscali.it (Mario Moles) Date: Mon, 10 Sep 2007 22:54:48 +0200 Subject: [Ekiga-list] Segmentation fault In-Reply-To: <46E58A64.9050505@free.fr> References: <200709102004.34408.mario.moles@tiscali.it> <46E58A64.9050505@free.fr> Message-ID: <200709102254.49527.mario.moles@tiscali.it> Il Monday 10 September 2007 20:18:12 Julien Puydt ha scritto: > There is a snapshot every hour when there are commits... we have no idea > which you're using with the information you gave us ekiga-snapshot 20070908-01-sid.5 From gunzera0 at yahoo.com.br Tue Sep 11 00:08:11 2007 From: gunzera0 at yahoo.com.br (Gunther Furtado) Date: Mon, 10 Sep 2007 21:08:11 -0300 Subject: [Ekiga-list] ekiga forgets video settings In-Reply-To: <46E55F12.4040100@free.fr> References: <46E55F12.4040100@free.fr> Message-ID: <46E5DC6B.1030907@yahoo.com.br> Julien Puydt escreveu: > Gunther Furtado a ?crit : >> Every time I restart ekiga the video settings returns to default >> values. How do I make it remember? > > Which video settings ? Ekiga stores its configuration in gconf on > unix-like systems, and in an XML file on win32. > Well, I am running ekiga on a Debian Lenny System with KDE 3.5 on an Athlon XP 1.8MHz on a SiS board and a logitech quickcam express (QC-usb driver). The settings I am trying to keep ar those under the video tab (brightness, white balance, contrast and saturation) but every time I switch off the web cam viewing those values are reset to default. Is there a way to keep those? > Snark on #ekiga Sorry, I don't know what that means. Thank you, -- Gunther Furtado gunzera0 at yahoo.com.br Curitiba - PR - Brasil From sdmuss at gmail.com Tue Sep 11 00:29:40 2007 From: sdmuss at gmail.com (Sam Mussmann) Date: Mon, 10 Sep 2007 20:29:40 -0400 Subject: [Ekiga-list] audio receive Message-ID: Hi, I'm trying to get Ekiga to work on Ubuntu Feisty Fawn i386. The configuration assistant worked great, including the audio test, but when I tried to call a 1-800 number (using the prefix from the wiki), I can't hear anything. I know what I should be hearing on this particular number. My microphone input works, and the audio playback worked in the configuration druid. I have upgraded to 2.0.9. Thank you in advance for your help, Sam From sevmek at free.fr Tue Sep 11 04:19:33 2007 From: sevmek at free.fr (yannick) Date: Tue, 11 Sep 2007 06:19:33 +0200 Subject: [Ekiga-list] audio receive In-Reply-To: References: Message-ID: <1189484373.351.68.camel@achille> Le lundi 10 septembre 2007 ? 20:29 -0400, Sam Mussmann a ?crit : > Hi, > I'm trying to get Ekiga to work on Ubuntu Feisty Fawn i386. The > configuration assistant worked great, including the audio test, but when > I tried to call a 1-800 number (using the prefix from the wiki), I can't > hear anything. I know what I should be hearing on this particular > number. My microphone input works, and the audio playback worked in the > configuration druid. I have upgraded to 2.0.9. Hi, Can you send me the number (in private) thus I can test it? I wrote most of that page on the wiki and tested the numbers. Regards, Yannick > Thank you in advance for your help, > Sam > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From jpuydt at free.fr Tue Sep 11 05:33:34 2007 From: jpuydt at free.fr (Julien Puydt) Date: Tue, 11 Sep 2007 07:33:34 +0200 Subject: [Ekiga-list] Segmentation fault In-Reply-To: <200709102254.49527.mario.moles@tiscali.it> References: <200709102004.34408.mario.moles@tiscali.it> <46E58A64.9050505@free.fr> <200709102254.49527.mario.moles@tiscali.it> Message-ID: <46E628AE.4040009@free.fr> Mario Moles a ?crit : > Il Monday 10 September 2007 20:18:12 Julien Puydt ha scritto: >> There is a snapshot every hour when there are commits... we have no idea >> which you're using with the information you gave us > > ekiga-snapshot 20070908-01-sid.5 Ok -- can we get a trace? Snark on #ekiga From dsandras at seconix.com Tue Sep 11 07:33:57 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 11 Sep 2007 09:33:57 +0200 Subject: [Ekiga-list] ekiga forgets video settings In-Reply-To: <46E5DC6B.1030907@yahoo.com.br> References: <46E55F12.4040100@free.fr> <46E5DC6B.1030907@yahoo.com.br> Message-ID: <1189496037.4743.2.camel@scorpion> Le lundi 10 septembre 2007 ? 21:08 -0300, Gunther Furtado a ?crit : > Julien Puydt escreveu: > > Gunther Furtado a ?crit : > >> Every time I restart ekiga the video settings returns to default > >> values. How do I make it remember? > > > > Which video settings ? Ekiga stores its configuration in gconf on > > unix-like systems, and in an XML file on win32. > > > > Well, I am running ekiga on a Debian Lenny System with KDE 3.5 on an > Athlon XP 1.8MHz on a SiS board and a logitech quickcam express (QC-usb > driver). The settings I am trying to keep ar those under the video tab > (brightness, white balance, contrast and saturation) but every time I > switch off the web cam viewing those values are reset to default. Is > there a way to keep those? > That's your driver that resets settings... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Tue Sep 11 07:34:14 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 11 Sep 2007 09:34:14 +0200 Subject: [Ekiga-list] Segmentation fault In-Reply-To: <46E628AE.4040009@free.fr> References: <200709102004.34408.mario.moles@tiscali.it> <46E58A64.9050505@free.fr> <200709102254.49527.mario.moles@tiscali.it> <46E628AE.4040009@free.fr> Message-ID: <1189496054.4743.4.camel@scorpion> Le mardi 11 septembre 2007 ? 07:33 +0200, Julien Puydt a ?crit : > Mario Moles a ?crit : > > Il Monday 10 September 2007 20:18:12 Julien Puydt ha scritto: > >> There is a snapshot every hour when there are commits... we have no idea > >> which you're using with the information you gave us > > > > ekiga-snapshot 20070908-01-sid.5 > > Ok -- can we get a trace? > I would try the latest snapshot first. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sdmuss at gmail.com Tue Sep 11 11:00:05 2007 From: sdmuss at gmail.com (Sam Mussmann) Date: Tue, 11 Sep 2007 07:00:05 -0400 Subject: [Ekiga-list] audio receive In-Reply-To: <1189484373.351.68.camel@achille> References: <1189484373.351.68.camel@achille> Message-ID: It's actually just the 1-800 number from my prepaid calling card, but I know how the audio is supposed to sound. The full number with prefix is sip:*85018004877646 at ekiga.net Thanks again, Sam Mussmann On 9/11/07, yannick wrote: > Le lundi 10 septembre 2007 ? 20:29 -0400, Sam Mussmann a ?crit : > > Hi, > > I'm trying to get Ekiga to work on Ubuntu Feisty Fawn i386. The > > configuration assistant worked great, including the audio test, but when > > I tried to call a 1-800 number (using the prefix from the wiki), I can't > > hear anything. I know what I should be hearing on this particular > > number. My microphone input works, and the audio playback worked in the > > configuration druid. I have upgraded to 2.0.9. > > Hi, > > Can you send me the number (in private) thus I can test it? I wrote most > of that page on the wiki and tested the numbers. > > Regards, > Yannick > > > Thank you in advance for your help, > > Sam > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From gc at pps.jussieu.fr Tue Sep 11 12:08:27 2007 From: gc at pps.jussieu.fr (NOREPLY) Date: Tue, 11 Sep 2007 14:08:27 +0200 Subject: [Ekiga-list] Segmentation fault In-Reply-To: <200709102004.34408.mario.moles@tiscali.it> References: <200709102004.34408.mario.moles@tiscali.it> Message-ID: <46E6853B.9000509@pps.jussieu.fr> Mario Moles wrote: > My linux-box: debian sid-amd64 > > kde3.5.7 > > mario at dhcppc1:~$ ekiga-snapshot > > (process:7997): GLib-GObject-CRITICAL **: > /build/buildd/glib2.0-2.14.0/gobject/gtype.c:2242: initialization > assertion failed, use IA__g_type_init() prior to this function > > (process:7997): GLib-GObject-CRITICAL **: g_object_new: assertion > `G_TYPE_IS_OBJECT (object_type)' failed > > (process:7997): GLib-GObject-CRITICAL **: g_object_ref: assertion > `G_IS_OBJECT (object)' failed > > Segmentation fault > Usually this happens to me when I install the svn and launch it without logging out. Try to log out and log in and the problem **should** desappear. ---Beppe--- From gunzera0 at yahoo.com.br Tue Sep 11 13:05:19 2007 From: gunzera0 at yahoo.com.br (Gunther Furtado) Date: Tue, 11 Sep 2007 10:05:19 -0300 Subject: [Ekiga-list] ekiga forgets video settings In-Reply-To: <1189496037.4743.2.camel@scorpion> References: <46E55F12.4040100@free.fr> <46E5DC6B.1030907@yahoo.com.br> <1189496037.4743.2.camel@scorpion> Message-ID: 2007/9/11, Damien Sandras : > Le lundi 10 septembre 2007 ? 21:08 -0300, Gunther Furtado a ?crit : > > Julien Puydt escreveu: > > > Gunther Furtado a ?crit : > > >> Every time I restart ekiga the video settings returns to default > > >> values. How do I make it remember? > > > > > > Which video settings ? Ekiga stores its configuration in gconf on > > > unix-like systems, and in an XML file on win32. > > > > > > > Well, I am running ekiga on a Debian Lenny System with KDE 3.5 on an > > Athlon XP 1.8MHz on a SiS board and a logitech quickcam express (QC-usb > > driver). The settings I am trying to keep ar those under the video tab > > (brightness, white balance, contrast and saturation) but every time I > > switch off the web cam viewing those values are reset to default. Is > > there a way to keep those? > > > > That's your driver that resets settings... Is there a way around it? I could not make gspca driver to work with my webcam. Thank you, -- Gunther Furtado gunzera0 at yahoo.com.br From ldauzat at bazile.fr Tue Sep 11 13:55:51 2007 From: ldauzat at bazile.fr (Lilian Dauzat) Date: Tue, 11 Sep 2007 15:55:51 +0200 Subject: [Ekiga-list] ekiga response time is very long Message-ID: <56e563d10709110655n76d2e922y3fae8d9cd81b8165@mail.gmail.com> Hello, I'm trying to set up some ekiga soft phones and I've some troubles: I only succeed to get registered sometimes to my IPBX (Asterisk) through the LAN, not using internet. (SIP) I'm still working on this problem. My main concern is the following: Once registered to my IPBX, when I try to emit or receive a call on the softphone I've to wait approx. 20-30s before getting the dial rings. any idea ? PS: Ekiga 2.0.9 / SIP mode / Kunbuntu Feisty 7.0.4 / Laptop connected to the LAN using wifi Thanks ! -- Lilian -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Sep 11 15:07:46 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 11 Sep 2007 17:07:46 +0200 Subject: [Ekiga-list] ekiga forgets video settings In-Reply-To: References: <46E55F12.4040100@free.fr> <46E5DC6B.1030907@yahoo.com.br> <1189496037.4743.2.camel@scorpion> Message-ID: <1189523266.24549.2.camel@scorpion> Le mardi 11 septembre 2007 ? 10:05 -0300, Gunther Furtado a ?crit : > 2007/9/11, Damien Sandras : > > Le lundi 10 septembre 2007 ? 21:08 -0300, Gunther Furtado a ?crit : > > > Julien Puydt escreveu: > > > > Gunther Furtado a ?crit : > > > >> Every time I restart ekiga the video settings returns to default > > > >> values. How do I make it remember? > > > > > > > > Which video settings ? Ekiga stores its configuration in gconf on > > > > unix-like systems, and in an XML file on win32. > > > > > > > > > > Well, I am running ekiga on a Debian Lenny System with KDE 3.5 on an > > > Athlon XP 1.8MHz on a SiS board and a logitech quickcam express (QC-usb > > > driver). The settings I am trying to keep ar those under the video tab > > > (brightness, white balance, contrast and saturation) but every time I > > > switch off the web cam viewing those values are reset to default. Is > > > there a way to keep those? > > > > > > > That's your driver that resets settings... > > Is there a way around it? I could not make gspca driver to work with my webcam. > Two ways : 1) First possibility : fix the driver 2) Second possibility : save the settings and restore them through ekiga (you will need to contribute some code there) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Tue Sep 11 15:23:57 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 11 Sep 2007 17:23:57 +0200 Subject: [Ekiga-list] ekiga response time is very long In-Reply-To: <56e563d10709110655n76d2e922y3fae8d9cd81b8165@mail.gmail.com> References: <56e563d10709110655n76d2e922y3fae8d9cd81b8165@mail.gmail.com> Message-ID: <1189524237.24549.4.camel@scorpion> Le mardi 11 septembre 2007 ? 15:55 +0200, Lilian Dauzat a ?crit : > Hello, > > I'm trying to set up some ekiga soft phones and I've some troubles: > I only succeed to get registered sometimes to my IPBX (Asterisk) > through the LAN, not using internet. (SIP) I'm still working on this > problem. > > My main concern is the following: > Once registered to my IPBX, when I try to emit or receive a call on > the softphone I've to wait approx. 20-30s before getting the dial > rings. > > any idea ? > -d 4 ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sevmek at free.fr Tue Sep 11 16:47:40 2007 From: sevmek at free.fr (yannick) Date: Tue, 11 Sep 2007 18:47:40 +0200 Subject: [Ekiga-list] audio receive In-Reply-To: References: <1189484373.351.68.camel@achille> Message-ID: <1189529260.351.72.camel@achille> Le mardi 11 septembre 2007 ? 07:00 -0400, Sam Mussmann a ?crit : > It's actually just the 1-800 number from my prepaid calling card, but > I know how the audio is supposed to sound. The full number with prefix > is sip:*85018004877646 at ekiga.net It works here: "AT&T Please enter your card number..." It use the PCMU audio codec. Regards, Yannick > Thanks again, > Sam Mussmann -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Tue Sep 11 17:29:09 2007 From: sevmek at free.fr (yannick) Date: Tue, 11 Sep 2007 19:29:09 +0200 Subject: [Ekiga-list] query In-Reply-To: <36581b10709092323v403a815ek3e48a02043689562@mail.gmail.com> References: <36581b10709092323v403a815ek3e48a02043689562@mail.gmail.com> Message-ID: <1189531749.351.75.camel@achille> Hi, I'm not familiar with rpm, but it's almost sure you already have EKiga installed. Ekiga depend on opal and pwlib, you must have those to have it work. It seems you version of Ekiga is pretty old. You should upgrade to 2.0.9 First remove old pwlib, opal and ekiga, then install new pwlib, oplan and finally ekiga. Regards, Yannick Le lundi 10 septembre 2007 ? 11:53 +0530, shaini joseph a ?crit : > Hello , > I have downloaded ekiga-2.0.9-0.fc6.i686.rpm & the 2 > corresponding dependencies .When I try to install pwlib following > error occurs . > Preparing... > ########################################### [100%] > file /usr/lib/libpt_linux_x86_r.so.1 from install of > pwlib-1.10.7-0.fc6 conflicts with file from package pwlib-1.10.1-6.fc6 > file /usr/lib/libpt_linux_x86_r.so.1.10 from install of > pwlib-1.10.7-0.fc6 conflicts with file from package pwlib-1.10.1-6.fc6 > file /usr/lib/pwlib/devices/sound/alsa_pwplugin.so from > install of pwlib-1.10.7-0.fc6 conflicts with file from package > pwlib-1.10.1-6.fc6 > file /usr/lib/pwlib/devices/videoinput/avc_pwplugin.so from > install of pwlib-1.10.7-0.fc6 conflicts with file from package > pwlib-1.10.1-6.fc6 > file /usr/lib/pwlib/devices/videoinput/v4l2_pwplugin.so from > install of pwlib-1.10.7-0.fc6 conflicts with file from package > pwlib-1.10.1-6.fc6 > file /usr/lib/pwlib/devices/videoinput/v4l_pwplugin.so from > install of pwlib-1.10.7-0.fc6 conflicts with file from package > pwlib-1.10.1-6.fc6 > when I try command : > rpm -qa | grep ekiga > It shows : ekiga-2.0.2-7 > rpm -qa | grep pwlib > pwlib-1.10.1-6.fc6 > rpm -qa | grep opal > opal-2.2.2-1.1 > It seems ekiga is already installed > there r certain files located on different paths like > /usr//share/gnome , /usr/share/sounds I'm unable to trace the read me > file ? > Can u guide as to how to run ekiga softphone > Thanks & regards > Shaini > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Tue Sep 11 20:35:14 2007 From: sevmek at free.fr (yannick) Date: Tue, 11 Sep 2007 22:35:14 +0200 Subject: [Ekiga-list] audio receive In-Reply-To: References: <1189484373.351.68.camel@achille> Message-ID: <1189542914.351.85.camel@achille> Le mardi 11 septembre 2007 ? 07:00 -0400, Sam Mussmann a ?crit : > I can't > > > hear anything. I suspect some fircall/router in the path preventing you to call. Can you test sip:500 at ekiga.net (it's an echo test) ? Or try another provider to reach the same number like: sip:*01318004877646 at ekiga.net (SIPBroker) sip:*20118004877646 at ekiga.net (VoIP.Brujula.net) Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sdmuss at gmail.com Tue Sep 11 22:01:23 2007 From: sdmuss at gmail.com (Sam Mussmann) Date: Tue, 11 Sep 2007 18:01:23 -0400 Subject: [Ekiga-list] audio receive In-Reply-To: <1189542914.351.85.camel@achille> References: <1189484373.351.68.camel@achille> <1189542914.351.85.camel@achille> Message-ID: I get the same thing (microphone working, but no incoming audio) on sip:500 at ekiga.net and SIPBroker. For some reason VoIP.Brujula.net doesn't seem to want to connect. I will contact my ISP to see if they're blocking or inhibiting it or something. Thank you again for your help. Sam On 9/11/07, yannick wrote: > Le mardi 11 septembre 2007 ? 07:00 -0400, Sam Mussmann a ?crit : > > I can't > > > > hear anything. > > I suspect some fircall/router in the path preventing you to call. > > Can you test sip:500 at ekiga.net (it's an echo test) ? > > Or try another provider to reach the same number like: > sip:*01318004877646 at ekiga.net (SIPBroker) > sip:*20118004877646 at ekiga.net (VoIP.Brujula.net) > > Regards, > Yannick > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From gunzera0 at yahoo.com.br Wed Sep 12 11:51:57 2007 From: gunzera0 at yahoo.com.br (Gunther Furtado) Date: Wed, 12 Sep 2007 08:51:57 -0300 Subject: [Ekiga-list] ekiga forgets video settings In-Reply-To: <1189523266.24549.2.camel@scorpion> References: <46E55F12.4040100@free.fr> <46E5DC6B.1030907@yahoo.com.br> <1189496037.4743.2.camel@scorpion> <1189523266.24549.2.camel@scorpion> Message-ID: 2007/9/11, Damien Sandras : > Le mardi 11 septembre 2007 ? 10:05 -0300, Gunther Furtado a ?crit : > > 2007/9/11, Damien Sandras : > > > Le lundi 10 septembre 2007 ? 21:08 -0300, Gunther Furtado a ?crit : > > > > Julien Puydt escreveu: > > > > > Gunther Furtado a ?crit : > > > > >> Every time I restart ekiga the video settings returns to default > > > > >> values. How do I make it remember? > > > > > > > > > > Which video settings ? Ekiga stores its configuration in gconf on > > > > > unix-like systems, and in an XML file on win32. > > > > > > > > > > > > > Well, I am running ekiga on a Debian Lenny System with KDE 3.5 on an > > > > Athlon XP 1.8MHz on a SiS board and a logitech quickcam express (QC-usb > > > > driver). The settings I am trying to keep ar those under the video tab > > > > (brightness, white balance, contrast and saturation) but every time I > > > > switch off the web cam viewing those values are reset to default. Is > > > > there a way to keep those? > > > > > > > > > > That's your driver that resets settings... > > > > Is there a way around it? I could not make gspca driver to work with my webcam. > > > > Two ways : > > 1) First possibility : fix the driver > 2) Second possibility : save the settings and restore them through ekiga > (you will need to contribute some code there) > -- Sorry! I do not have the knowledge to try it, not even nearly. anybody else? cheers, -- Gunther Furtado gunzera0 at yahoo.com.br From cm at blinkenlichten.de Wed Sep 12 12:53:17 2007 From: cm at blinkenlichten.de (Carsten Maass) Date: Wed, 12 Sep 2007 14:53:17 +0200 Subject: [Ekiga-list] ekiga forgets video settings In-Reply-To: References: <46E55F12.4040100@free.fr> <46E5DC6B.1030907@yahoo.com.br> <1189496037.4743.2.camel@scorpion> <1189523266.24549.2.camel@scorpion> Message-ID: <46E7E13D.6090708@blinkenlichten.de> Hello Gunther, Gunther Furtado schrieb: >>>>> Well, I am running ekiga on a Debian Lenny System with KDE 3.5 on an >>>>> Athlon XP 1.8MHz on a SiS board and a logitech quickcam express (QC-usb >>>>> driver). The settings I am trying to keep ar those under the video tab >>>>> (brightness, white balance, contrast and saturation) but every time I >>>>> switch off the web cam viewing those values are reset to default. Is >>>>> there a way to keep those? >>>>> >>>> That's your driver that resets settings... >>> Is there a way around it? I could not make gspca driver to work with my webcam. >>> >> Two ways : >> >> 1) First possibility : fix the driver >> 2) Second possibility : save the settings and restore them through ekiga >> (you will need to contribute some code there) >> -- > > Sorry! I do not have the knowledge to try it, not even nearly. anybody else? there is a tool called qcset in the qc-usb-utils package. You can run it with the approprite parameters prior to starting ekiga. Greetings, Carsten. From sdmuss at gmail.com Thu Sep 13 00:50:28 2007 From: sdmuss at gmail.com (Sam Mussmann) Date: Wed, 12 Sep 2007 20:50:28 -0400 Subject: [Ekiga-list] audio receive In-Reply-To: References: <1189484373.351.68.camel@achille> <1189542914.351.85.camel@achille> Message-ID: I contacted my ISP, and they block a few ports, but they don't block 5000-5100 or the STUN port (I forget). I have the firewall on my router set up to allow these ports as well, but just to test, I connected in a DMZ. I got the same results. I can ping ekiga.net. My uneducated guess at this point is that there is something somewhere blocking my traffic to ekiga.net, although I have no idea what. Thanks again, Sam On 9/11/07, Sam Mussmann wrote: > I get the same thing (microphone working, but no incoming audio) on > sip:500 at ekiga.net and SIPBroker. For some reason VoIP.Brujula.net > doesn't seem to want to connect. > > I will contact my ISP to see if they're blocking or inhibiting it or something. > > Thank you again for your help. > Sam > > On 9/11/07, yannick wrote: > > Le mardi 11 septembre 2007 ? 07:00 -0400, Sam Mussmann a ?crit : > > > I can't > > > > > hear anything. > > > > I suspect some fircall/router in the path preventing you to call. > > > > Can you test sip:500 at ekiga.net (it's an echo test) ? > > > > Or try another provider to reach the same number like: > > sip:*01318004877646 at ekiga.net (SIPBroker) > > sip:*20118004877646 at ekiga.net (VoIP.Brujula.net) > > > > Regards, > > Yannick > > -- > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > sip:yannick at ekiga.net > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > From sevmek at free.fr Thu Sep 13 03:47:51 2007 From: sevmek at free.fr (yannick) Date: Thu, 13 Sep 2007 05:47:51 +0200 Subject: [Ekiga-list] audio receive In-Reply-To: References: <1189484373.351.68.camel@achille> <1189542914.351.85.camel@achille> Message-ID: <1189655271.351.96.camel@achille> Hi, Provide us a debug output: http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_from_Ekiga Try to place your call and put the resulting file somewhere on the net, like here: http://pastebin.com/ Regards, Yannick Le mercredi 12 septembre 2007 ? 20:50 -0400, Sam Mussmann a ?crit : > I contacted my ISP, and they block a few ports, but they don't block > 5000-5100 or the STUN port (I forget). I have the firewall on my > router set up to allow these ports as well, but just to test, I > connected in a DMZ. I got the same results. I can ping ekiga.net. > My uneducated guess at this point is that there is something somewhere > blocking my traffic to ekiga.net, although I have no idea what. > > Thanks again, > Sam > > On 9/11/07, Sam Mussmann wrote: > > I get the same thing (microphone working, but no incoming audio) on > > sip:500 at ekiga.net and SIPBroker. For some reason VoIP.Brujula.net > > doesn't seem to want to connect. > > > > I will contact my ISP to see if they're blocking or inhibiting it or something. > > > > Thank you again for your help. > > Sam > > > > On 9/11/07, yannick wrote: > > > Le mardi 11 septembre 2007 ? 07:00 -0400, Sam Mussmann a ?crit : > > > > I can't > > > > > > hear anything. > > > > > > I suspect some fircall/router in the path preventing you to call. > > > > > > Can you test sip:500 at ekiga.net (it's an echo test) ? > > > > > > Or try another provider to reach the same number like: > > > sip:*01318004877646 at ekiga.net (SIPBroker) > > > sip:*20118004877646 at ekiga.net (VoIP.Brujula.net) > > > > > > Regards, > > > Yannick > > > -- > > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > > sip:yannick at ekiga.net > > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From gunzera0 at yahoo.com.br Thu Sep 13 10:43:01 2007 From: gunzera0 at yahoo.com.br (Gunther Furtado) Date: Thu, 13 Sep 2007 07:43:01 -0300 Subject: [Ekiga-list] ekiga forgets video settings In-Reply-To: <46E7E13D.6090708@blinkenlichten.de> References: <46E55F12.4040100@free.fr> <46E5DC6B.1030907@yahoo.com.br> <1189496037.4743.2.camel@scorpion> <1189523266.24549.2.camel@scorpion> <46E7E13D.6090708@blinkenlichten.de> Message-ID: <46E91435.4050300@yahoo.com.br> Carsten Maass escreveu: > Hello Gunther, > > Gunther Furtado schrieb: >>>>>> Well, I am running ekiga on a Debian Lenny System with KDE 3.5 on an >>>>>> Athlon XP 1.8MHz on a SiS board and a logitech quickcam express (QC-usb >>>>>> driver). The settings I am trying to keep ar those under the video tab >>>>>> (brightness, white balance, contrast and saturation) but every time I >>>>>> switch off the web cam viewing those values are reset to default. Is >>>>>> there a way to keep those? >>>>>> >>>>> That's your driver that resets settings... >>>> Is there a way around it? I could not make gspca driver to work with my webcam. >>>> >>> Two ways : >>> >>> 1) First possibility : fix the driver >>> 2) Second possibility : save the settings and restore them through ekiga >>> (you will need to contribute some code there) >>> -- >> Sorry! I do not have the knowledge to try it, not even nearly. anybody else? > > there is a tool called qcset in the qc-usb-utils package. You can run it > with the approprite parameters prior to starting ekiga. > You can also use the command: $ qcset /dev/video1 keepsettings=y and the values are stored > Greetings, > Carsten. > Cheers, -- Gunther Furtado gunzera0 at yahoo.com.br Curitiba - PR - Brasil From shaini08 at gmail.com Thu Sep 13 11:04:09 2007 From: shaini08 at gmail.com (shaini joseph) Date: Thu, 13 Sep 2007 16:34:09 +0530 Subject: [Ekiga-list] Bug Message-ID: <36581b10709130404v37b985ecy872ae97e96733843@mail.gmail.com> Hello, I tried to call Wengophone from Ekiga. I do get an incoming call message (pop-up) for wengo but when I to connect the call on wengo I get an error mesage I am attaching the report generated by yhe bug-reporting tool Thanks & regards Shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: ekiga-bugreport.txt URL: From sdmuss at gmail.com Thu Sep 13 11:14:21 2007 From: sdmuss at gmail.com (Sam Mussmann) Date: Thu, 13 Sep 2007 07:14:21 -0400 Subject: [Ekiga-list] audio receive In-Reply-To: <1189655271.351.96.camel@achille> References: <1189484373.351.68.camel@achille> <1189542914.351.85.camel@achille> <1189655271.351.96.camel@achille> Message-ID: I tried the call to sip:500 at ekiga.net. I put the output here: http://pastebin.com/m3fd37e2f Yours, Sam On 9/12/07, yannick wrote: > Hi, > > Provide us a debug output: > http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output_from_Ekiga > Try to place your call and put the resulting file somewhere on the net, > like here: > http://pastebin.com/ > > Regards, > Yannick > > Le mercredi 12 septembre 2007 ? 20:50 -0400, Sam Mussmann a ?crit : > > I contacted my ISP, and they block a few ports, but they don't block > > 5000-5100 or the STUN port (I forget). I have the firewall on my > > router set up to allow these ports as well, but just to test, I > > connected in a DMZ. I got the same results. I can ping ekiga.net. > > My uneducated guess at this point is that there is something somewhere > > blocking my traffic to ekiga.net, although I have no idea what. > > > > Thanks again, > > Sam > > > > On 9/11/07, Sam Mussmann wrote: > > > I get the same thing (microphone working, but no incoming audio) on > > > sip:500 at ekiga.net and SIPBroker. For some reason VoIP.Brujula.net > > > doesn't seem to want to connect. > > > > > > I will contact my ISP to see if they're blocking or inhibiting it or something. > > > > > > Thank you again for your help. > > > Sam > > > > > > On 9/11/07, yannick wrote: > > > > Le mardi 11 septembre 2007 ? 07:00 -0400, Sam Mussmann a ?crit : > > > > > I can't > > > > > > > hear anything. > > > > > > > > I suspect some fircall/router in the path preventing you to call. > > > > > > > > Can you test sip:500 at ekiga.net (it's an echo test) ? > > > > > > > > Or try another provider to reach the same number like: > > > > sip:*01318004877646 at ekiga.net (SIPBroker) > > > > sip:*20118004877646 at ekiga.net (VoIP.Brujula.net) > > > > > > > > Regards, > > > > Yannick > > > > -- > > > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > > > sip:yannick at ekiga.net > > > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > > > > > _______________________________________________ > > > > ekiga-list mailing list > > > > ekiga-list at gnome.org > > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From michel.memeteau at gmail.com Thu Sep 13 11:29:30 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Thu, 13 Sep 2007 13:29:30 +0200 Subject: [Ekiga-list] Bug In-Reply-To: <36581b10709130404v37b985ecy872ae97e96733843@mail.gmail.com> References: <36581b10709130404v37b985ecy872ae97e96733843@mail.gmail.com> Message-ID: Which version of Wengo are you using ? latest ? Wengo is only partially interoperable on several points . 2007/9/13, shaini joseph : > > Hello, > I tried to call Wengophone from Ekiga. > I do get an incoming call message (pop-up) for wengo > but when I to connect the call on wengo I get an error mesage What is the error message ? are you trying to send video from ekiga to wengo ? I am attaching the report generated by yhe bug-reporting tool > > > > > Thanks & regards > Shaini > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 Mobile : 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From shaini08 at gmail.com Thu Sep 13 11:36:04 2007 From: shaini08 at gmail.com (shaini joseph) Date: Thu, 13 Sep 2007 17:06:04 +0530 Subject: [Ekiga-list] Hi Message-ID: <36581b10709130436xb5b4edev83216912a1b27229@mail.gmail.com> Hi I hapened to search for the error :"Cannot load icon for open folder" >From one of the Re:[Ekiga -list]: Itried the following: $ gdb $ (which Ekiga) $ gdb run Starting program: /usr/bin/ekiga (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) ---Type to continue, or q to quit---q Error while reading shared library symbols: Quit (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread -1209116960 (LWP 3915)] Xlib: connection to ":0.0" refused by server Xlib: No protocol specified (ekiga:3915): Gtk-WARNING **: cannot open display: Program exited with code 01. I had also mailed before concerning the same which was reported by bug-repoting tool Thanks $ regards Shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: From shaini08 at gmail.com Thu Sep 13 11:36:04 2007 From: shaini08 at gmail.com (shaini joseph) Date: Thu, 13 Sep 2007 17:06:04 +0530 Subject: [Ekiga-list] Hi Message-ID: <36581b10709130436xb5b4edev83216912a1b27229@mail.gmail.com> Hi I hapened to search for the error :"Cannot load icon for open folder" >From one of the Re:[Ekiga -list]: Itried the following: $ gdb $ (which Ekiga) $ gdb run Starting program: /usr/bin/ekiga (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) ---Type to continue, or q to quit---q Error while reading shared library symbols: Quit (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] [New Thread -1209116960 (LWP 3915)] Xlib: connection to ":0.0" refused by server Xlib: No protocol specified (ekiga:3915): Gtk-WARNING **: cannot open display: Program exited with code 01. I had also mailed before concerning the same which was reported by bug-repoting tool Thanks $ regards Shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Thu Sep 13 11:42:33 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 13 Sep 2007 13:42:33 +0200 Subject: [Ekiga-list] audio receive In-Reply-To: References: <1189484373.351.68.camel@achille> <1189542914.351.85.camel@achille> <1189655271.351.96.camel@achille> Message-ID: <1189683753.4037.21.camel@scorpion> Le jeudi 13 septembre 2007 ? 07:14 -0400, Sam Mussmann a ?crit : > I tried the call to sip:500 at ekiga.net. > I put the output here: http://pastebin.com/m3fd37e2f > Something is indeed eating your packets : packetsReceived = 0 octetsReceived = 0 -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jpuydt at free.fr Thu Sep 13 11:44:26 2007 From: jpuydt at free.fr (Julien Puydt) Date: Thu, 13 Sep 2007 13:44:26 +0200 Subject: [Ekiga-list] Hi In-Reply-To: <36581b10709130436xb5b4edev83216912a1b27229@mail.gmail.com> References: <36581b10709130436xb5b4edev83216912a1b27229@mail.gmail.com> Message-ID: <46E9229A.3060507@free.fr> shaini joseph a ?crit : > Xlib: connection to ":0.0" refused by server > Xlib: No protocol specified > > (ekiga:3915): Gtk-WARNING **: cannot open display: This is definitely not an ekiga bug, but a setup issue. If you were trying to launch xterm from the same console, you'd get the same problem. Snark on #ekiga From geno999 at yahoo.com Fri Sep 14 20:27:35 2007 From: geno999 at yahoo.com (J. Rehbock) Date: Fri, 14 Sep 2007 13:27:35 -0700 (PDT) Subject: [Ekiga-list] Full-duplex sound card recommendations?? Message-ID: <89105.62111.qm@web33802.mail.mud.yahoo.com> There seem to be a fair number of Audigy cards that are NOT full duplex. I would appreciate any very specific recommendations for linux-friendly desktop sound cards that work well with Ekiga. Tnx. -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Sat Sep 15 09:17:43 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 15 Sep 2007 11:17:43 +0200 Subject: [Ekiga-list] Full-duplex sound card recommendations?? In-Reply-To: <89105.62111.qm@web33802.mail.mud.yahoo.com> References: <89105.62111.qm@web33802.mail.mud.yahoo.com> Message-ID: <1189847863.4372.3.camel@scorpion> Le vendredi 14 septembre 2007 ? 13:27 -0700, J. Rehbock a ?crit : > There seem to be a fair number of Audigy cards that are NOT full > duplex. I would appreciate any very specific recommendations for > linux-friendly desktop sound cards that work well with Ekiga. Tnx. All soundcards bought in the last 5 years should work well. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From M_May at web.de Sun Sep 16 15:10:43 2007 From: M_May at web.de (M_May at web.de) Date: Sun, 16 Sep 2007 17:10:43 +0200 Subject: [Ekiga-list] Ekiga over SSH Message-ID: <1509319614@web.de> Hi! On my Ubuntu 7.04 machine (ekiga 2.0.9, amd64) I am using a wireless network with VPN which has most of its ports blocked so I have to use SSH to forward the ports needed for mail, jabber etc. But I didn't succeed in configuring ekiga yet. The configuration wizard tells me, that I am completly blocked. So how can i forward SIP over SSH to use ekiga? What do I have to set for NAT? Do I set localhost as proxy? Thanks for the help! Matz -- Strom, der nicht gelb ist: http://www.atomausstieg-selber-machen.de _________________________________________________________________________ In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114 From dsandras at seconix.com Sun Sep 16 18:48:19 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 16 Sep 2007 20:48:19 +0200 Subject: [Ekiga-list] Ekiga over SSH In-Reply-To: <1509319614@web.de> References: <1509319614@web.de> Message-ID: <1189968499.3918.21.camel@scorpion> Hi, Le dimanche 16 septembre 2007 ? 17:10 +0200, M_May at web.de a ?crit : > Hi! > > On my Ubuntu 7.04 machine (ekiga 2.0.9, amd64) I am using a wireless network with VPN which has most of its ports blocked so I have to use SSH to forward the ports needed for mail, jabber etc. > But I didn't succeed in configuring ekiga yet. The configuration wizard tells me, that I am completly blocked. So how can i forward SIP over SSH to use ekiga? What do I have to set for NAT? Do I set localhost as proxy? > SIP over SSH won't work (at least to my knowledge). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From M_May at web.de Sun Sep 16 19:13:28 2007 From: M_May at web.de (M_May at web.de) Date: Sun, 16 Sep 2007 21:13:28 +0200 Subject: [Ekiga-list] Ekiga over SSH Message-ID: <1509594247@web.de> Damien Sandras schrieb: > SIP over SSH won't work (at least to my knowledge). > > Oh. Is there maybe the possibility to use the SSH tunnel as SOCKS proxy with ssh -D 1080 user at host ? I played a little bit around with the settings but didn't succeed but I really don't want to stick with Skype... -- Strom, der nicht gelb ist: http://www.atomausstieg-selber-machen.de _____________________________________________________________________ Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/?mc=100071&distributionid=000000000066 From dsandras at seconix.com Sun Sep 16 20:27:50 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 16 Sep 2007 22:27:50 +0200 Subject: [Ekiga-list] Ekiga over SSH In-Reply-To: <1509594247@web.de> References: <1509594247@web.de> Message-ID: <1189974470.3918.40.camel@scorpion> Le dimanche 16 septembre 2007 ? 21:13 +0200, M_May at web.de a ?crit : > Damien Sandras schrieb: > > SIP over SSH won't work (at least to my knowledge). > > > > > > Oh. Is there maybe the possibility to use the SSH tunnel as SOCKS proxy with ssh -D 1080 user at host ? I played a little bit around with the settings but didn't succeed but I really don't want to stick with Skype... > I don't think so, but I could be wrong... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From tux-spam at design-to-use.de Mon Sep 17 06:40:52 2007 From: tux-spam at design-to-use.de (Tobias Krais) Date: Mon, 17 Sep 2007 08:40:52 +0200 Subject: [Ekiga-list] Listening on different network interfaces Message-ID: <46EE2174.8010005@design-to-use.de> Hi together, I'm a new Ekiga user. I appreciate Ekiga, because of the supported audio codecs. But I have a problem. I have two user accounts. One account listening on network interface ra0 connected to the web. An other account should listen on tap0, a VPN interface. I can only connect to one account, because Ekiga can only listen on one interface. How can I solve this? Other softphones like twinkle listen on both interfaces, but to not have the good speach quality. I use Ekiga 2.0.3 in Ubuntu Feisty. I hope you can tell me how to solve this problem. Greetings, Tobias From dsandras at seconix.com Mon Sep 17 07:17:33 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 17 Sep 2007 09:17:33 +0200 Subject: [Ekiga-list] Listening on different network interfaces In-Reply-To: <46EE2174.8010005@design-to-use.de> References: <46EE2174.8010005@design-to-use.de> Message-ID: <1190013453.3916.1.camel@scorpion> Hi, Le lundi 17 septembre 2007 ? 08:40 +0200, Tobias Krais a ?crit : > Hi together, > > I'm a new Ekiga user. I appreciate Ekiga, because of the supported audio > codecs. But I have a problem. I have two user accounts. One account > listening on network interface ra0 connected to the web. An other > account should listen on tap0, a VPN interface. I can only connect to > one account, because Ekiga can only listen on one interface. How can I > solve this? Other softphones like twinkle listen on both interfaces, but > to not have the good speach quality. > > I use Ekiga 2.0.3 in Ubuntu Feisty. I hope you can tell me how to solve > this problem. This should be solved with next release. I will test again, and report back to you. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jpuydt at free.fr Mon Sep 17 07:23:34 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 17 Sep 2007 09:23:34 +0200 Subject: [Ekiga-list] Listening on different network interfaces In-Reply-To: <46EE2174.8010005@design-to-use.de> References: <46EE2174.8010005@design-to-use.de> Message-ID: <46EE2B76.3030003@free.fr> Tobias Krais a ?crit : > I use Ekiga 2.0.3 in Ubuntu Feisty. Don't report bug about this version if you find any : you're *six* *stable* *bugfix* releases behind! Snark on #ekiga From tux-spam at design-to-use.de Mon Sep 17 07:23:44 2007 From: tux-spam at design-to-use.de (Tobias Krais) Date: Mon, 17 Sep 2007 09:23:44 +0200 Subject: [Ekiga-list] Listening on different network interfaces In-Reply-To: <1190013453.3916.1.camel@scorpion> References: <46EE2174.8010005@design-to-use.de> <1190013453.3916.1.camel@scorpion> Message-ID: <46EE2B80.4030602@design-to-use.de> Hi Damien, >> I can only connect to >> one account, because Ekiga can only listen on one interface. How can I >> solve this? >> I use Ekiga 2.0.3 in Ubuntu Feisty. I hope you can tell me how to solve >> this problem. > > This should be solved with next release. what release number will this be? Will it be released before October (because of Ubuntu Gutsy integration...)? Greetings, Tobias From dsandras at seconix.com Mon Sep 17 07:28:38 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 17 Sep 2007 09:28:38 +0200 Subject: [Ekiga-list] Listening on different network interfaces In-Reply-To: <46EE2B80.4030602@design-to-use.de> References: <46EE2174.8010005@design-to-use.de> <1190013453.3916.1.camel@scorpion> <46EE2B80.4030602@design-to-use.de> Message-ID: <1190014118.3916.8.camel@scorpion> Le lundi 17 septembre 2007 ? 09:23 +0200, Tobias Krais a ?crit : > Hi Damien, > > >> I can only connect to > >> one account, because Ekiga can only listen on one interface. How can I > >> solve this? > > >> I use Ekiga 2.0.3 in Ubuntu Feisty. I hope you can tell me how to solve > >> this problem. > > > > This should be solved with next release. > > what release number will this be? Will it be released before October > (because of Ubuntu Gutsy integration...)? > No it won't... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From tux-spam at design-to-use.de Mon Sep 17 08:21:50 2007 From: tux-spam at design-to-use.de (Tobias Krais) Date: Mon, 17 Sep 2007 10:21:50 +0200 Subject: [Ekiga-list] Listening on different network interfaces In-Reply-To: <46EE2B76.3030003@free.fr> References: <46EE2174.8010005@design-to-use.de> <46EE2B76.3030003@free.fr> Message-ID: <46EE391E.6000704@design-to-use.de> Hi Julien, >> I use Ekiga 2.0.3 in Ubuntu Feisty. > > Don't report bug about this version if you find any : you're *six* > *stable* *bugfix* releases behind! You're right. Do you think my problem will be solved using ekiga-snapshot from here: deb-src http://snapshots.ekiga.net/ubuntu/ feisty main It uses the version form yesterday: 20070916-04-feisty.1 Greetings, Tobias From dsandras at seconix.com Mon Sep 17 10:09:27 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 17 Sep 2007 12:09:27 +0200 Subject: [Ekiga-list] Listening on different network interfaces In-Reply-To: <46EE391E.6000704@design-to-use.de> References: <46EE2174.8010005@design-to-use.de> <46EE2B76.3030003@free.fr> <46EE391E.6000704@design-to-use.de> Message-ID: <1190023767.3916.40.camel@scorpion> Le lundi 17 septembre 2007 ? 10:21 +0200, Tobias Krais a ?crit : > Hi Julien, > > >> I use Ekiga 2.0.3 in Ubuntu Feisty. > > > > Don't report bug about this version if you find any : you're *six* > > *stable* *bugfix* releases behind! > > You're right. Do you think my problem will be solved using > ekiga-snapshot from here: > deb-src http://snapshots.ekiga.net/ubuntu/ feisty main > It uses the version form yesterday: 20070916-04-feisty.1 > It won't work, I need to implement something before and test it. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From shaini08 at gmail.com Mon Sep 17 11:56:57 2007 From: shaini08 at gmail.com (shaini joseph) Date: Mon, 17 Sep 2007 17:26:57 +0530 Subject: [Ekiga-list] Query Message-ID: <36581b10709170456t8b9b93se28fa0219954e674@mail.gmail.com> hello, I am a registered user with 2 a/c & < roselet at ekiga.net>. I am also able to login . whenever I call my friend (who 's also registered) it gives me different errors like "User not found"(even if he is online) "Remote user is not reachable" & call gets automatically disconnected . One thing perhaps it would be helpful for u to solve the bug while using the Configuration Assistant while detecting the NAT type I get message : Symmetric Nat type while my friend Port Restricted type (done OK to enable the STUN server) Has it got to do with the NAT type ????? while calls tried at following: sip:conferences at fedoraproject.org sip:@voip.wengo.fr works (i.e calls duration amount to few sec) & unfortunately I dont hear anything from the party called . plsss Hoping for a favourable reply Thanks & Regards Shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: From shaini08 at gmail.com Mon Sep 17 12:03:27 2007 From: shaini08 at gmail.com (shaini joseph) Date: Mon, 17 Sep 2007 17:33:27 +0530 Subject: [Ekiga-list] hello Message-ID: <36581b10709170503o7b485370g307a9acfb08a8611@mail.gmail.com> hi, How do I get to see my friends picture as in ekiga is a video conferencing application. I do have a webcam installed & my friend too has it. what r the setting to be made thanks & regards shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Sep 17 16:02:32 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 17 Sep 2007 18:02:32 +0200 Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.0.10 released Message-ID: <1190044952.3916.61.camel@scorpion> This is an update of Ekiga 2.0. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/2.0 Dependancies like OPAL and PWLIB are available at: ftp://ftp.gnome.org/pub/gnome/sources/opal/2.2/ ftp://ftp.gnome.org/pub/gnome/sources/pwlib/1.10 OPAL and PWLIB *external* dependancies have been updated to OPAL 2.2.10 and PWLIB 1.10.9. * What's changed ? ================== - Fixed several interoperability issues due to bugs and limitations in CISCO Call Manager. (Damien Sandras, #429076) - Decreased the default NAT binding refresh timeout. (Damien Sandras) - Fixed interoperability issue with SER+rtpproxy. (Damien Sandras, #430870) - Fixed the check for the installed GTK+ version in the WIN32 installer. (Vincent Luba) - Fixed race condition when receiving an abnormal load of SIP text messages. (Damien Sandras) - Fixed possible crash when opening V4L devices with 352x288 fixed width capability. (Luc Saillard, #434223). - Better handling of ACK requests timeouts. (Damien Sandras) - Fixed QOP authentication issues. (#368524, Knut omang) - Fixed Assertion fail in SetAttribute() if empty formats list and don't use deleted media session info when parsing fails. (Craig Southeren) - Refresh video capabilities when appropriate in the V4L plugin. (Michael Smith) - Fixed problems with the sa7134 card and with newer kernels in the V4L2 plugin. (Michael Smith) - Do not use the loopback interface as possible interface on OpenSolaris. (Elaine Xiong from SUN, #439873) - Fixed routing of ACK requests sent for an INVITE with an original Route header. (Damien Sandras) - Optimized some color space conversions using MediaLib. (Elaine Xiong) - Fixed potential problems with MJPEG-based cameras. (Matthias Schneider) * Security Fix ============== - Fixed possible remote crash due to fancy headers. (Jos? Miguel Esparza) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From faith_larsen at yahoo.com Mon Sep 17 17:06:26 2007 From: faith_larsen at yahoo.com (faith larsen) Date: Mon, 17 Sep 2007 10:06:26 -0700 (PDT) Subject: [Ekiga-list] ekiga-list Digest, Vol 14, Issue 23 Message-ID: <790398.83066.qm@web51809.mail.re2.yahoo.com> I get this request every day, is that normal? ----- Original Message ---- From: "ekiga-list-request at gnome.org" To: ekiga-list at gnome.org Sent: Monday, September 17, 2007 9:00:28 AM Subject: ekiga-list Digest, Vol 14, Issue 23 Send ekiga-list mailing list submissions to ekiga-list at gnome.org To subscribe or unsubscribe via the World Wide Web, visit http://mail.gnome.org/mailman/listinfo/ekiga-list or, via email, send a message with subject or body 'help' to ekiga-list-request at gnome.org You can reach the person managing the list at ekiga-list-owner at gnome.org When replying, please edit your Subject line so it is more specific than "Re: Contents of ekiga-list digest..." Today's Topics: 1. Query (shaini joseph) 2. hello (shaini joseph) ---------------------------------------------------------------------- Message: 1 Date: Mon, 17 Sep 2007 17:26:57 +0530 From: "shaini joseph" Subject: [Ekiga-list] Query To: ekiga-list at gnome.org Message-ID: <36581b10709170456t8b9b93se28fa0219954e674 at mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" hello, I am a registered user with 2 a/c & < roselet at ekiga.net>. I am also able to login . whenever I call my friend (who 's also registered) it gives me different errors like "User not found"(even if he is online) "Remote user is not reachable" & call gets automatically disconnected . One thing perhaps it would be helpful for u to solve the bug while using the Configuration Assistant while detecting the NAT type I get message : Symmetric Nat type while my friend Port Restricted type (done OK to enable the STUN server) Has it got to do with the NAT type ????? while calls tried at following: sip:conferences at fedoraproject.org sip:@voip.wengo.fr works (i.e calls duration amount to few sec) & unfortunately I dont hear anything from the party called . plsss Hoping for a favourable reply Thanks & Regards Shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: /archives/ekiga-list/attachments/20070917/29aa3720/attachment.htm ------------------------------ Message: 2 Date: Mon, 17 Sep 2007 17:33:27 +0530 From: "shaini joseph" Subject: [Ekiga-list] hello To: ekiga-list at gnome.org Message-ID: <36581b10709170503o7b485370g307a9acfb08a8611 at mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" hi, How do I get to see my friends picture as in ekiga is a video conferencing application. I do have a webcam installed & my friend too has it. what r the setting to be made thanks & regards shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: /archives/ekiga-list/attachments/20070917/d916297b/attachment.htm ------------------------------ _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list End of ekiga-list Digest, Vol 14, Issue 23 ****************************************** ____________________________________________________________________________________ Don't let your dream ride pass you by. Make it a reality with Yahoo! Autos. http://autos.yahoo.com/index.html -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Mon Sep 17 17:17:37 2007 From: sevmek at free.fr (yannick) Date: Mon, 17 Sep 2007 19:17:37 +0200 Subject: [Ekiga-list] hello In-Reply-To: <36581b10709170503o7b485370g307a9acfb08a8611@mail.gmail.com> References: <36581b10709170503o7b485370g307a9acfb08a8611@mail.gmail.com> Message-ID: <1190049457.351.141.camel@achille> Le lundi 17 septembre 2007 ? 17:33 +0530, shaini joseph a ?crit : > hi, > How do I get to see my friends picture as in ekiga is a video > conferencing application. > > I do have a webcam installed & my friend too has it. > > what r the setting to be made > Hi, http://wiki.ekiga.org/index.php/Video_Calls Regards, Yannick > > thanks & regards > shaini > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Mon Sep 17 17:20:12 2007 From: sevmek at free.fr (yannick) Date: Mon, 17 Sep 2007 19:20:12 +0200 Subject: [Ekiga-list] Query In-Reply-To: <36581b10709170456t8b9b93se28fa0219954e674@mail.gmail.com> References: <36581b10709170456t8b9b93se28fa0219954e674@mail.gmail.com> Message-ID: <1190049613.351.144.camel@achille> Le lundi 17 septembre 2007 ? 17:26 +0530, shaini joseph a ?crit : > hello, > I am a registered user with 2 a/c & > . I am also able to login . > whenever I call my friend (who 's also registered) it gives me > different errors like > "User not found"(even if he is online) "Remote user is not reachable" > & call gets automatically disconnected . > > One thing perhaps it would be helpful for u to solve the bug > while using the Configuration Assistant while detecting the NAT type I > get message : > Symmetric Nat type Hi, This is bad. Here are some ideas: http://wiki.ekiga.org/index.php/Ekiga_behind_a_NAT_router > while my friend > Port Restricted type (done OK to enable the STUN server) Good. > Has it got to do with the NAT type ????? > Most probably. Regards, Yannick > while calls tried at following: > sip:conferences at fedoraproject.org > sip:@voip.wengo.fr > works (i.e calls duration amount to few sec) & unfortunately I dont > hear anything from the party called . > > > plsss Hoping for a favourable reply > > Thanks & Regards > Shaini > > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dsandras at seconix.com Mon Sep 17 19:53:52 2007 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 17 Sep 2007 21:53:52 +0200 Subject: [Ekiga-list] ekiga-list Digest, Vol 14, Issue 23 In-Reply-To: <790398.83066.qm@web51809.mail.re2.yahoo.com> References: <790398.83066.qm@web51809.mail.re2.yahoo.com> Message-ID: <1190058832.3938.8.camel@scorpion> Le lundi 17 septembre 2007 ? 10:06 -0700, faith larsen a ?crit : > > I get this request every day, is that normal? I think that you enabled it in your subscription options. (Receive daily batch of e-mails - or something similar) > ----- Original Message ---- > From: "ekiga-list-request at gnome.org" > To: ekiga-list at gnome.org > Sent: Monday, September 17, 2007 9:00:28 AM > Subject: ekiga-list Digest, Vol 14, Issue 23 > > Send ekiga-list mailing list submissions to > ekiga-list at gnome.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.gnome.org/mailman/listinfo/ekiga-list > or, via email, send a message with subject or body 'help' to > ekiga-list-request at gnome.org > > You can reach the person managing the list at > ekiga-list-owner at gnome.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ekiga-list digest..." > > > Today's Topics: > > 1. Query (shaini joseph) > 2. hello (shaini joseph) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 17 Sep 2007 17:26:57 +0530 > From: "shaini joseph" > Subject: [Ekiga-list] Query > To: ekiga-list at gnome.org > Message-ID: <36581b10709170456t8b9b93se28fa0219954e674 at mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > hello, > I am a registered user with 2 a/c & < > roselet at ekiga.net>. I am also able to login . > whenever I call my friend (who 's also registered) it gives me > different > errors like > "User not found"(even if he is online) "Remote user is not > reachable" & > call gets automatically disconnected . > > One thing perhaps it would be helpful for u to solve the bug > while using the Configuration Assistant while detecting the NAT type I > get > message : > Symmetric Nat type > while my friend > Port Restricted type (done OK to enable the STUN server) > Has it got to do with the NAT type ????? > > while calls tried at following: > sip:conferences at fedoraproject.org > sip:@voip.wengo.fr > works (i.e calls duration amount to few sec) & unfortunately I dont > hear > anything from the party called . > > > plsss Hoping for a favourable reply > > Thanks & Regards > Shaini > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: /archives/ekiga-list/attachments/20070917/29aa3720/attachment.htm > > ------------------------------ > > Message: 2 > Date: Mon, 17 Sep 2007 17:33:27 +0530 > From: "shaini joseph" > Subject: [Ekiga-list] hello > To: ekiga-list at gnome.org > Message-ID: > <36581b10709170503o7b485370g307a9acfb08a8611 at mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > hi, > How do I get to see my friends picture as in ekiga is a video > conferencing application. > > I do have a webcam installed & my friend too has it. > > what r the setting to be made > > > thanks & regards > shaini > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: /archives/ekiga-list/attachments/20070917/d916297b/attachment.htm > > ------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > End of ekiga-list Digest, Vol 14, Issue 23 > ****************************************** > > > > > > ______________________________________________________________________ > Tonight's top picks. What will you watch tonight? Preview the hottest > shows on Yahoo! TV. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Tue Sep 18 09:53:09 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 18 Sep 2007 11:53:09 +0200 Subject: [Ekiga-list] [ANNOUNCE] Ekiga 2.0.11 released Message-ID: <1190109189.4290.12.camel@scorpion> This is an update of Ekiga 2.0. * What is it ? ============== Ekiga is a free Voice over IP softphone allowing you to do free calls over the Internet. Ekiga is the first Open Source application to support both H.323 and SIP, as well as audio and video. Ekiga was formerly known as GnomeMeeting. More information can be found at http://www.ekiga.org * Where to get it ? =================== Ekiga is available at: ftp://ftp.gnome.org/pub/gnome/sources/ekiga/2.0 Dependancies like OPAL and PWLIB are available at: ftp://ftp.gnome.org/pub/gnome/sources/opal/2.2/ ftp://ftp.gnome.org/pub/gnome/sources/pwlib/1.10 OPAL and PWLIB *external* dependancies have been updated to OPAL 2.2.11 and PWLIB 1.10.10. * What's changed ? ================== - Killed GCC 4.2 warnings. - Make sure V4L2 builds correctly in PWLIB. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From zach at zzelinski.com Wed Sep 19 02:47:47 2007 From: zach at zzelinski.com (Zachary Zelinski) Date: Tue, 18 Sep 2007 19:47:47 -0700 Subject: [Ekiga-list] Ekiga stopped working Message-ID: <86e56ee40709181947n62041a3dg6d3b7b464731f95e@mail.gmail.com> Hi all, I hope I'm doing this correctly-- I have been using Ekiga now for a couple of weeks mainly because it works, it's easy to use, and I can use it with my Gizmo account. I use it on an AMD machine running Ubuntu Feisty Fawn, and this morning I was alerted to updates to certain files-- the Synaptic Package Manager history shows: "Upgraded the following packages: libdecoration0 (1:0.5.5~git20070912+3v1ubuntu0) to 1: 0.5.5~git20070917+3v1ubuntu1 libpt-1.10.0 (1.10.7~dfsg1-5~feisty.4490) to 1.10.9-1~feisty.4506 libpt-plugins-alsa (1.10.7~dfsg1-5~feisty.4490) to 1.10.9-1~feisty.4506 libpt-plugins-v4l (1.10.7~dfsg1-5~feisty.4490) to 1.10.9-1~feisty.4506 libpt-plugins-v4l2 (1.10.7~dfsg1-5~feisty.4490) to 1.10.9-1~feisty.4506" After these were installed, I restarted my computer (simply to reboot into Windows for a quick update there). When I returned to Ubuntu, Ekiga would not start. I started it using the terminal and got this message: "ekiga: error while loading shared libraries: libpt.so.1.10.7: cannot open shared object file: No such file or directory" I believe I am running Ekiga 2.0.9, and I have some issues trying to build the latest 2.0.11 version. What should I do? Should I remove all of the packages I updated and then reinstall them through the Ekiga download section to make sure they work with Ekiga 2.0.9? Thanks for the help! Zach -------------- next part -------------- An HTML attachment was scrubbed... URL: From marcel.dess at gmail.com Wed Sep 19 04:40:03 2007 From: marcel.dess at gmail.com (marcel.dess) Date: Wed, 19 Sep 2007 00:40:03 -0400 Subject: [Ekiga-list] libopal 2.2 and libopal 2.2.0 ! Message-ID: <46F0A823.8010203@gmail.com> I use Kubuntu Feisty. I install Ekiga by Synaptic from http://www.ekiga.org/admin/downloads/latest/ubuntu/feisty_x86/ ./ and Ekiga by synaptic install libopal-2.2. Now, i start Ekiga and receive this line: ekiga: error while loading shared libraries: libpt.so.1.10.7: cannot open shared object file: No such file or directory I download libopal-2.2.0 from ekiga.org but installation is not possible, conflit with libopal-2.2. I have no choice, i remove link (in synaptic)www.ekiga.org.... and libopal-2.2. I download all the files (for ubuntu feisty) on www.ekiga.org, and now Ekiga start and work good. Problem with libopal-2.2 from repository ? From shaini08 at gmail.com Wed Sep 19 04:47:37 2007 From: shaini08 at gmail.com (shaini joseph) Date: Wed, 19 Sep 2007 10:17:37 +0530 Subject: [Ekiga-list] Ekiga not running Message-ID: <36581b10709182147p54d74bf0r6ebcb967bd2d1b9c@mail.gmail.com> Hi, I could open Ekiga until day before yesterday(even though I had not been able to make or receive a single call) . Now when I try it doesnt open up immediatedly as before . I left it ti start & switcked off my monitor today when I checked it gvn a message: (ekiga:6947): libgnomevfs-WARNING **: Failed to open session DBUS connection: Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help) Volume monitoring will not work. Killed. What could be the prob. I require it to be solved urgently. pls help. Thanks Shaini -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Wed Sep 19 11:26:27 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 13:26:27 +0200 Subject: [Ekiga-list] Ekiga not running In-Reply-To: <36581b10709182147p54d74bf0r6ebcb967bd2d1b9c@mail.gmail.com> References: <36581b10709182147p54d74bf0r6ebcb967bd2d1b9c@mail.gmail.com> Message-ID: <1190201187.4263.18.camel@scorpion> Le mercredi 19 septembre 2007 ? 10:17 +0530, shaini joseph a ?crit : > Hi, > I could open Ekiga until day before yesterday(even though I had > not been able to make or receive a single call) . > Now when I try it doesnt open up immediatedly as before . I left it > ti start & switcked off my monitor today when I checked > it gvn a message: > (ekiga:6947): libgnomevfs-WARNING **: Failed to open session DBUS > connection: > Unable to determine the address of the message bus (try 'man > dbus-launch' and 'man dbus-daemon' for help) > Volume monitoring will not work. > Killed. > > What could be the prob. I require it to be solved urgently. > pls help. it is libgnomevfs complaining, not ekiga. I have no idea what it can be, nor why libgnomevfs does use dbus at all. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Sep 19 11:28:01 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 13:28:01 +0200 Subject: [Ekiga-list] Ekiga stopped working In-Reply-To: <86e56ee40709181947n62041a3dg6d3b7b464731f95e@mail.gmail.com> References: <86e56ee40709181947n62041a3dg6d3b7b464731f95e@mail.gmail.com> Message-ID: <1190201281.4263.21.camel@scorpion> Le mardi 18 septembre 2007 ? 19:47 -0700, Zachary Zelinski a ?crit : > Hi all, I hope I'm doing this correctly-- > > I have been using Ekiga now for a couple of weeks mainly because it > works, it's easy to use, and I can use it with my Gizmo account. I use > it on an AMD machine running Ubuntu Feisty Fawn, and this morning I > was alerted to updates to certain files-- the Synaptic Package Manager > history shows: > > "Upgraded the following packages: > libdecoration0 (1:0.5.5~git20070912+3v1ubuntu0) to 1:0.5.5~git20070917 > +3v1ubuntu1 > libpt-1.10.0 (1.10.7~dfsg1-5~feisty.4490) to 1.10.9-1~feisty.4506 > libpt-plugins-alsa ( 1.10.7~dfsg1-5~feisty.4490) to > 1.10.9-1~feisty.4506 > libpt-plugins-v4l (1.10.7~dfsg1-5~feisty.4490) to 1.10.9-1~feisty.4506 > libpt-plugins-v4l2 (1.10.7~dfsg1-5~feisty.4490) to > 1.10.9-1~feisty.4506" > > After these were installed, I restarted my computer (simply to reboot > into Windows for a quick update there). When I returned to Ubuntu, > Ekiga would not start. I started it using the terminal and got this > message: > > "ekiga: error while loading shared libraries: libpt.so.1.10.7: cannot > open shared object file: No such file or directory" > > I believe I am running Ekiga 2.0.9, and I have some issues trying to > build the latest 2.0.11 version. What should I do? Should I remove all > of the packages I updated and then reinstall them through the Ekiga > download section to make sure they work with Ekiga 2.0.9? Apparently your package manager broken the dependancies on your system. I would do what you propose, and reinstall either using our debs, or using the package manager (but starting from scratch). You will have to do : apt-get remove --purge 'libpt-*' It should remove everything. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Sep 19 11:28:45 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 13:28:45 +0200 Subject: [Ekiga-list] libopal 2.2 and libopal 2.2.0 ! In-Reply-To: <46F0A823.8010203@gmail.com> References: <46F0A823.8010203@gmail.com> Message-ID: <1190201325.4263.23.camel@scorpion> Le mercredi 19 septembre 2007 ? 00:40 -0400, marcel.dess a ?crit : > I use Kubuntu Feisty. > I install Ekiga by Synaptic from > http://www.ekiga.org/admin/downloads/latest/ubuntu/feisty_x86/ ./ > and Ekiga by synaptic install libopal-2.2. > Now, i start Ekiga and receive this line: > ekiga: error while loading shared libraries: libpt.so.1.10.7: cannot > open shared object file: No such file or directory > > I download libopal-2.2.0 from ekiga.org but installation is not > possible, conflit with libopal-2.2. > > I have no choice, i remove link (in synaptic)www.ekiga.org.... and > libopal-2.2. > I download all the files (for ubuntu feisty) on www.ekiga.org, and now > Ekiga start and work good. > > Problem with libopal-2.2 from repository ? It seems so, we will make sure it does not happen with 2.0.11. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From kas at fi.muni.cz Wed Sep 19 11:45:53 2007 From: kas at fi.muni.cz (Jan Kasprzak) Date: Wed, 19 Sep 2007 13:45:53 +0200 Subject: [Ekiga-list] ekiga and pulseaudio Message-ID: <20070919114553.GM27894@fi.muni.cz> Hello, does ekiga work with PulseAudio? I want to use PA for sharing the sound card, storing the volume settings, etc. However, ekiga does not seem to work with it: - I use ALSA audio plugin - I have the following .asoundrc: pcm.!default { type pulse } ctl.!default { type pulse } - "aplay something.wav" works. - when I call 500 at ekiga.net, I get the "Could not open audio channel for audio transmission" message. - I have tried both "Default" and "VIA 8237" input and output devices in Preferences -> Audio Devices dialog, none of this work. Thanks, -Yenya -- | Jan "Yenya" Kasprzak | | GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E | | http://www.fi.muni.cz/~kas/ Journal: http://www.fi.muni.cz/~kas/blog/ | > So at least in some cases, I think we should "default to stupid, < > but give users rope". --Linus Torvalds < From dsandras at seconix.com Wed Sep 19 11:50:43 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 13:50:43 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <20070919114553.GM27894@fi.muni.cz> References: <20070919114553.GM27894@fi.muni.cz> Message-ID: <1190202643.4263.33.camel@scorpion> Le mercredi 19 septembre 2007 ? 13:45 +0200, Jan Kasprzak a ?crit : > Hello, > > does ekiga work with PulseAudio? I want to use PA for sharing the sound > card, storing the volume settings, etc. However, ekiga does not > seem to work with it: > > - I use ALSA audio plugin > - I have the following .asoundrc: > > pcm.!default { > type pulse > } > > ctl.!default { > type pulse > } > > - "aplay something.wav" works. > - when I call 500 at ekiga.net, I get the "Could not open audio channel > for audio transmission" message. > - I have tried both "Default" and "VIA 8237" input and output devices > in Preferences -> Audio Devices dialog, none of this work. Perhaps you should try on their mailing list... The problem is probably related to pulseaudio itself... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From kas at fi.muni.cz Wed Sep 19 12:56:04 2007 From: kas at fi.muni.cz (Jan Kasprzak) Date: Wed, 19 Sep 2007 14:56:04 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <1190202643.4263.33.camel@scorpion> References: <20070919114553.GM27894@fi.muni.cz> <1190202643.4263.33.camel@scorpion> Message-ID: <20070919125604.GP27894@fi.muni.cz> Damien Sandras wrote: : Le mercredi 19 septembre 2007 ? 13:45 +0200, Jan Kasprzak a ?crit : : > Hello, : > : > does ekiga work with PulseAudio? I want to use PA for sharing the sound : > card, storing the volume settings, etc. However, ekiga does not : > seem to work with it: : > : > - I use ALSA audio plugin : > - I have the following .asoundrc: : > : > pcm.!default { : > type pulse : > } : > : > ctl.!default { : > type pulse : > } : > : > - "aplay something.wav" works. : > - when I call 500 at ekiga.net, I get the "Could not open audio channel : > for audio transmission" message. : > - I have tried both "Default" and "VIA 8237" input and output devices : > in Preferences -> Audio Devices dialog, none of this work. : : Perhaps you should try on their mailing list... The problem is probably : related to pulseaudio itself... Maybe. The main question probably is whether ekiga ALSA plugin supports reading and using the .asoundrc configuration at all. Because so far it seems ekiga tries to access the ALSA device directly no matter what is written in .asoundrc. Using "ls -ltu" I have found that ekiga does not reread .asoundrc even when "Detect devices" button in the Audio Devices dialog is pressed. -Yenya -- | Jan "Yenya" Kasprzak | | GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E | | http://www.fi.muni.cz/~kas/ Journal: http://www.fi.muni.cz/~kas/blog/ | > So at least in some cases, I think we should "default to stupid, < > but give users rope". --Linus Torvalds < From dsandras at seconix.com Wed Sep 19 13:04:57 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 15:04:57 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <20070919125604.GP27894@fi.muni.cz> References: <20070919114553.GM27894@fi.muni.cz> <1190202643.4263.33.camel@scorpion> <20070919125604.GP27894@fi.muni.cz> Message-ID: <1190207097.4263.47.camel@scorpion> Le mercredi 19 septembre 2007 ? 14:56 +0200, Jan Kasprzak a ?crit : > Damien Sandras wrote: > : Le mercredi 19 septembre 2007 ? 13:45 +0200, Jan Kasprzak a ?crit : > : > Hello, > : > > : > does ekiga work with PulseAudio? I want to use PA for sharing the sound > : > card, storing the volume settings, etc. However, ekiga does not > : > seem to work with it: > : > > : > - I use ALSA audio plugin > : > - I have the following .asoundrc: > : > > : > pcm.!default { > : > type pulse > : > } > : > > : > ctl.!default { > : > type pulse > : > } > : > > : > - "aplay something.wav" works. > : > - when I call 500 at ekiga.net, I get the "Could not open audio channel > : > for audio transmission" message. > : > - I have tried both "Default" and "VIA 8237" input and output devices > : > in Preferences -> Audio Devices dialog, none of this work. > : > : Perhaps you should try on their mailing list... The problem is probably > : related to pulseaudio itself... > > Maybe. > > The main question probably is whether ekiga ALSA plugin > supports reading and using the .asoundrc configuration at all. Because Of course, it is transparent. As long as you use the Default device, it will use whatever configuration comes with the Default device. > so far it seems ekiga tries to access the ALSA device directly > no matter what is written in .asoundrc. Using "ls -ltu" I have found > that ekiga does not reread .asoundrc even when "Detect devices" > button in the Audio Devices dialog is pressed. It is transparent, and handled by libasound. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From hesselbarth at ims.uni-hannover.de Wed Sep 19 14:14:11 2007 From: hesselbarth at ims.uni-hannover.de (Sebastian Hesselbarth) Date: Wed, 19 Sep 2007 16:14:11 +0200 Subject: [Ekiga-list] ekiga and pulseaudio Message-ID: <46F12EB3.5070707@ims.uni-hannover.de> >> : Perhaps you should try on their mailing list... The problem is probably >> : related to pulseaudio itself... >> >> Maybe. >> >> The main question probably is whether ekiga ALSA plugin >> supports reading and using the .asoundrc configuration at all. Because > >Of course, it is transparent. As long as you use the Default device, it >will use whatever configuration comes with the Default device. > >> so far it seems ekiga tries to access the ALSA device directly >> no matter what is written in .asoundrc. Using "ls -ltu" I have found >> that ekiga does not reread .asoundrc even when "Detect devices" >> button in the Audio Devices dialog is pressed. > >It is transparent, and handled by libasound. First of all, sorry for breaking the reply chain but I just subscribed to the list. Unfortunately, it seems that pwlib's device discovery does not use asoundrc. I tried ekiga today on a machine without any audio device but pulseaudio and alsa redirection to pa. Same result: ekiga does not find any audio devices but aplay/gstreamer/.. do. Sebastian From dsandras at seconix.com Wed Sep 19 14:24:43 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 16:24:43 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <46F12EB3.5070707@ims.uni-hannover.de> References: <46F12EB3.5070707@ims.uni-hannover.de> Message-ID: <1190211883.4263.54.camel@scorpion> Le mercredi 19 septembre 2007 ? 16:14 +0200, Sebastian Hesselbarth a ?crit : > >> : Perhaps you should try on their mailing list... The problem is > probably > >> : related to pulseaudio itself... > >> > >> Maybe. > >> > >> The main question probably is whether ekiga ALSA plugin > >> supports reading and using the .asoundrc configuration at all. Because > > > >Of course, it is transparent. As long as you use the Default device, it > >will use whatever configuration comes with the Default device. > > > >> so far it seems ekiga tries to access the ALSA device directly > >> no matter what is written in .asoundrc. Using "ls -ltu" I have found > >> that ekiga does not reread .asoundrc even when "Detect devices" > >> button in the Audio Devices dialog is pressed. > > > >It is transparent, and handled by libasound. > > First of all, sorry for breaking the reply chain but I just subscribed > to the list. > > Unfortunately, it seems that pwlib's device discovery does not use > asoundrc. I tried ekiga today on a machine without any audio device but > pulseaudio and alsa redirection to pa. > > Same result: ekiga does not find any audio devices but > aplay/gstreamer/.. do. > As I mentionned earlier in this thread, if you remap the default device in .asoundrc and use it in Ekiga, it works. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From hesselbarth at ims.uni-hannover.de Wed Sep 19 14:39:42 2007 From: hesselbarth at ims.uni-hannover.de (Sebastian Hesselbarth) Date: Wed, 19 Sep 2007 16:39:42 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <1190211883.4263.54.camel@scorpion> References: <46F12EB3.5070707@ims.uni-hannover.de> <1190211883.4263.54.camel@scorpion> Message-ID: <46F134AE.7070207@ims.uni-hannover.de> Damien Sandras wrote: > As I mentionned earlier in this thread, if you remap the default device > in .asoundrc and use it in Ekiga, it works. Ok, maybe I should be more precise. I cannot even select a device in ekiga because it does not find any devices. Preferences->Devices->Audio Devices: Audio plugin set to ALSA Audio devices show both (input and output) that "No device found" Detect devices does not change anything. On the hardware view of sound devices this is true because the machine does not have a sound driver loaded but i do have sound with pulseaudio and with alsa's .asoundrc redirection to pulseaudio. Is there any way to dig deeper in ekiga's device discovery (debug)? Installed version is 2.0.9-0.etch0 (deb) Sebastian From kas at fi.muni.cz Wed Sep 19 14:48:19 2007 From: kas at fi.muni.cz (Jan Kasprzak) Date: Wed, 19 Sep 2007 16:48:19 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <1190211883.4263.54.camel@scorpion> References: <46F12EB3.5070707@ims.uni-hannover.de> <1190211883.4263.54.camel@scorpion> Message-ID: <20070919144819.GW27894@fi.muni.cz> Damien Sandras wrote: : Le mercredi 19 septembre 2007 ? 16:14 +0200, Sebastian Hesselbarth a : ?crit : : > Same result: ekiga does not find any audio devices but : > aplay/gstreamer/.. do. : > : : As I mentionned earlier in this thread, if you remap the default device : in .asoundrc and use it in Ekiga, it works. Yes, but it is not possible to use anything other than the default device. I have found that when I start ekiga _after_ modifying .asoundrc (and pcm.!default, ctl.!default remapped to pulseaudio), ekiga crashes with the following STDERR: ekiga: pcm_params.c:2351: sndrv_pcm_hw_params: Assertion `err >= 0' failed. Xlib: unexpected async reply (sequence 0xb64)! However, according to http://www.pulseaudio.org/ticket/23 and https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2601 it seems to be a bug in alsa/ioplug. No solution mentioned there, however. -Y. -- | Jan "Yenya" Kasprzak | | GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E | | http://www.fi.muni.cz/~kas/ Journal: http://www.fi.muni.cz/~kas/blog/ | > So at least in some cases, I think we should "default to stupid, < > but give users rope". --Linus Torvalds < From dsandras at seconix.com Wed Sep 19 16:57:21 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 18:57:21 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <46F134AE.7070207@ims.uni-hannover.de> References: <46F12EB3.5070707@ims.uni-hannover.de> <1190211883.4263.54.camel@scorpion> <46F134AE.7070207@ims.uni-hannover.de> Message-ID: <1190221041.4263.81.camel@scorpion> Le mercredi 19 septembre 2007 ? 16:39 +0200, Sebastian Hesselbarth a ?crit : > Damien Sandras wrote: > > As I mentionned earlier in this thread, if you remap the default device > > in .asoundrc and use it in Ekiga, it works. > > Ok, maybe I should be more precise. > > I cannot even select a device in ekiga because it does not find any devices. > > Preferences->Devices->Audio Devices: > Audio plugin set to ALSA > Audio devices show both (input and output) that "No device found" > Detect devices does not change anything. > > On the hardware view of sound devices this is true because the > machine does not have a sound driver loaded but i do have sound > with pulseaudio and with alsa's .asoundrc redirection to pulseaudio. > > Is there any way to dig deeper in ekiga's device discovery (debug)? It is right. The plugin is programmed this way : if sound devices are found, then allow direct access to those devices AND add the possibility to access the default device. That means that if you have a soundcard, you can have direct access to the card, but also access through the "default" device that you can remap as you wish. If you do not have a soundcard, then the "default" device will not be accessible. The plugin could be changed to alter that behavior. It could also be enhanced to allow scanning user defined special devices and allow to select them. This work is yet to be done. Any taker ? (that should not be a complex patch to do). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Sep 19 16:57:54 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 18:57:54 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <20070919144819.GW27894@fi.muni.cz> References: <46F12EB3.5070707@ims.uni-hannover.de> <1190211883.4263.54.camel@scorpion> <20070919144819.GW27894@fi.muni.cz> Message-ID: <1190221074.4263.83.camel@scorpion> Le mercredi 19 septembre 2007 ? 16:48 +0200, Jan Kasprzak a ?crit : > Damien Sandras wrote: > : Le mercredi 19 septembre 2007 ? 16:14 +0200, Sebastian Hesselbarth a > : ?crit : > : > Same result: ekiga does not find any audio devices but > : > aplay/gstreamer/.. do. > : > > : > : As I mentionned earlier in this thread, if you remap the default device > : in .asoundrc and use it in Ekiga, it works. > > Yes, but it is not possible to use anything other than the > default device. > > I have found that when I start ekiga _after_ modifying .asoundrc > (and pcm.!default, ctl.!default remapped to pulseaudio), ekiga crashes with > the following STDERR: > > ekiga: pcm_params.c:2351: sndrv_pcm_hw_params: Assertion `err >= 0' failed. > Xlib: unexpected async reply (sequence 0xb64)! > > However, according to > > http://www.pulseaudio.org/ticket/23 and > https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2601 > > it seems to be a bug in alsa/ioplug. No solution mentioned there, however. > Interesting, we have received a few reports about this and didn't know how to handle it. If it is an ALSA bug, then we can mention it. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From zach at zzelinski.com Wed Sep 19 18:45:38 2007 From: zach at zzelinski.com (Zachary Zelinski) Date: Wed, 19 Sep 2007 11:45:38 -0700 Subject: [Ekiga-list] Ekiga stopped working In-Reply-To: <1190201281.4263.21.camel@scorpion> References: <86e56ee40709181947n62041a3dg6d3b7b464731f95e@mail.gmail.com> <1190201281.4263.21.camel@scorpion> Message-ID: <86e56ee40709191145r4ad5a365l1a3940e85264f1a2@mail.gmail.com> When I remove lipt-1.10.0 and reinstall from the ekiga download site, and do the same with libopal-2.2, ekiga works, but then my package manager wants to upgrade libpt from 1.10.7 to 1.10.10. After doing so, I get that same message about not finding the right library. Wouldn't this have something to do with Ekiga referencing a specific library version, and if so, is it possible for me to somehow change the reference to use the latest libpt version? On 9/19/07, Damien Sandras wrote: > > Le mardi 18 septembre 2007 ? 19:47 -0700, Zachary Zelinski a ?crit : > > Hi all, I hope I'm doing this correctly-- > > > > I have been using Ekiga now for a couple of weeks mainly because it > > works, it's easy to use, and I can use it with my Gizmo account. I use > > it on an AMD machine running Ubuntu Feisty Fawn, and this morning I > > was alerted to updates to certain files-- the Synaptic Package Manager > > history shows: > > > > "Upgraded the following packages: > > libdecoration0 (1:0.5.5~git20070912+3v1ubuntu0) to 1:0.5.5~git20070917 > > +3v1ubuntu1 > > libpt-1.10.0 (1.10.7~dfsg1-5~feisty.4490) to 1.10.9-1~feisty.4506 > > libpt-plugins-alsa ( 1.10.7~dfsg1-5~feisty.4490) to > > 1.10.9-1~feisty.4506 > > libpt-plugins-v4l (1.10.7~dfsg1-5~feisty.4490) to 1.10.9-1~feisty.4506 > > libpt-plugins-v4l2 (1.10.7~dfsg1-5~feisty.4490) to > > 1.10.9-1~feisty.4506" > > > > After these were installed, I restarted my computer (simply to reboot > > into Windows for a quick update there). When I returned to Ubuntu, > > Ekiga would not start. I started it using the terminal and got this > > message: > > > > "ekiga: error while loading shared libraries: libpt.so.1.10.7: cannot > > open shared object file: No such file or directory" > > > > I believe I am running Ekiga 2.0.9, and I have some issues trying to > > build the latest 2.0.11 version. What should I do? Should I remove all > > of the packages I updated and then reinstall them through the Ekiga > > download section to make sure they work with Ekiga 2.0.9? > > Apparently your package manager broken the dependancies on your system. > > I would do what you propose, and reinstall either using our debs, or > using the package manager (but starting from scratch). > > You will have to do : > apt-get remove --purge 'libpt-*' > > It should remove everything. > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Wed Sep 19 19:25:12 2007 From: jpuydt at free.fr (Julien Puydt) Date: Wed, 19 Sep 2007 21:25:12 +0200 Subject: [Ekiga-list] ekiga and pulseaudio In-Reply-To: <1190221041.4263.81.camel@scorpion> References: <46F12EB3.5070707@ims.uni-hannover.de> <1190211883.4263.54.camel@scorpion> <46F134AE.7070207@ims.uni-hannover.de> <1190221041.4263.81.camel@scorpion> Message-ID: <46F17798.3090603@free.fr> Damien Sandras a ?crit : > Le mercredi 19 septembre 2007 ? 16:39 +0200, Sebastian Hesselbarth a > ?crit : >> Damien Sandras wrote: >>> As I mentionned earlier in this thread, if you remap the default device >>> in .asoundrc and use it in Ekiga, it works. >> Ok, maybe I should be more precise. >> >> I cannot even select a device in ekiga because it does not find any devices. >> >> Preferences->Devices->Audio Devices: >> Audio plugin set to ALSA >> Audio devices show both (input and output) that "No device found" >> Detect devices does not change anything. >> >> On the hardware view of sound devices this is true because the >> machine does not have a sound driver loaded but i do have sound >> with pulseaudio and with alsa's .asoundrc redirection to pulseaudio. >> >> Is there any way to dig deeper in ekiga's device discovery (debug)? > > It is right. > > The plugin is programmed this way : > if sound devices are found, then allow direct access to those devices > AND > add the possibility to access the default device. > > That means that if you have a soundcard, you can have direct access to > the card, but also access through the "default" device that you can > remap as you wish. If you do not have a soundcard, then the "default" > device will not be accessible. > > The plugin could be changed to alter that behavior. > It could also be enhanced to allow scanning user defined special devices > and allow to select them. > > This work is yet to be done. Any taker ? (that should not be a complex > patch to do). There's a bug about it on bugzilla already, assigned to me with a patch and asking for feedback about it working or not. Snark PS: bugzilla down : can't give the number! From law_ence.dev at ntlworld.com Wed Sep 19 20:10:27 2007 From: law_ence.dev at ntlworld.com (ael) Date: Wed, 19 Sep 2007 21:10:27 +0100 Subject: [Ekiga-list] 2.0.11 on www.ekiga.org? Message-ID: <46F18233.7040306@ntlworld.com> Will version 2.0.11 appear on www.ekiga.com soon? 2.0.9 seems to the latest there. ael From dsandras at seconix.com Wed Sep 19 21:25:11 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 19 Sep 2007 23:25:11 +0200 Subject: [Ekiga-list] 2.0.11 on www.ekiga.org? In-Reply-To: <46F18233.7040306@ntlworld.com> References: <46F18233.7040306@ntlworld.com> Message-ID: <1190237111.7088.2.camel@scorpion> Le mercredi 19 septembre 2007 ? 21:10 +0100, ael a ?crit : > Will version 2.0.11 appear on www.ekiga.com soon? 2.0.9 seems to the > latest there. > As soon as I get enough packages :-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Sep 20 07:30:08 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 20 Sep 2007 09:30:08 +0200 Subject: [Ekiga-list] Ekiga stopped working In-Reply-To: <86e56ee40709191145r4ad5a365l1a3940e85264f1a2@mail.gmail.com> References: <86e56ee40709181947n62041a3dg6d3b7b464731f95e@mail.gmail.com> <1190201281.4263.21.camel@scorpion> <86e56ee40709191145r4ad5a365l1a3940e85264f1a2@mail.gmail.com> Message-ID: <1190273408.4451.1.camel@scorpion> Le mercredi 19 septembre 2007 ? 11:45 -0700, Zachary Zelinski a ?crit : > When I remove lipt-1.10.0 and reinstall from the ekiga download site, > and do the same with libopal-2.2, ekiga works, but then my package > manager wants to upgrade libpt from 1.10.7 to 1.10.10. After doing so, > I get that same message about not finding the right library. Wouldn't > this have something to do with Ekiga referencing a specific library > version, and if so, is it possible for me to somehow change the > reference to use the latest libpt version? You are not forced to use a specific libpt version, we just force you to use the latest version because most bugs affecting Ekiga are fixed in OPAL and PWLIB. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Sep 20 07:30:08 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 20 Sep 2007 09:30:08 +0200 Subject: [Ekiga-list] Ekiga stopped working In-Reply-To: <86e56ee40709191145r4ad5a365l1a3940e85264f1a2@mail.gmail.com> References: <86e56ee40709181947n62041a3dg6d3b7b464731f95e@mail.gmail.com> <1190201281.4263.21.camel@scorpion> <86e56ee40709191145r4ad5a365l1a3940e85264f1a2@mail.gmail.com> Message-ID: <1190273408.4451.1.camel@scorpion> Le mercredi 19 septembre 2007 ? 11:45 -0700, Zachary Zelinski a ?crit : > When I remove lipt-1.10.0 and reinstall from the ekiga download site, > and do the same with libopal-2.2, ekiga works, but then my package > manager wants to upgrade libpt from 1.10.7 to 1.10.10. After doing so, > I get that same message about not finding the right library. Wouldn't > this have something to do with Ekiga referencing a specific library > version, and if so, is it possible for me to somehow change the > reference to use the latest libpt version? You are not forced to use a specific libpt version, we just force you to use the latest version because most bugs affecting Ekiga are fixed in OPAL and PWLIB. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From gsteng02 at o2online.de Thu Sep 20 19:42:50 2007 From: gsteng02 at o2online.de (G.Stengel) Date: Thu, 20 Sep 2007 21:42:50 +0200 Subject: [Ekiga-list] installation problem with address book - local contacts Message-ID: <200709202142.50645.gsteng02@o2online.de> Hi, I'm quite new to ekiga, so sorry if I'm asking an obvious question: I can't enter any contacts into ekiga's local address book, it always stays empty, why? I've installed evolution-data-server-1.10.1 which I think is necessary. Running ekiga from the command line gives messages like (ekiga:16328): libebook-WARNING **: Can't find installed BookFactories This happens on startup and if I try to add a contact. I'm running ekiga from KDE and have no completete GNOME system installed, maybe some package is missing. However, all required libs seem to be there if I type ldd /usr/bin/ekiga Some more info on my system: openSuse 10.2 64 bit, KDE 3.5.5, ekiga 2.0.9 Can anyone help? regards Gerhard ------------------------------------------------------- From palos at post.sk Thu Sep 20 22:16:22 2007 From: palos at post.sk (Palo S.) Date: 21 Sep 2007 00:16:22 +0200 (CEST) Subject: [Ekiga-list] Listening on different network interfaces Message-ID: <46F2F136.000001.07507@kamasutra> I think that in the meantime, you can try to set up Twinkle to do the job - it has the required feature and I would bet that your sound quality problems with it are connected with ALSA - try using OSS (ALSA implementation in Twinkle does not seem to be the best). At least for me, Twinkle has comparable sound quality to Ekiga when using OSS. ----- Origin?lna Spr?va ----- Od: Damien Sandras Komu: Ekiga mailing list Poslan?: 17.09.2007 12:09 Predmet: Re: [Ekiga-list] Listening on different network interfaces > Le lundi 17 septembre 2007 ? 10:21 +0200, Tobias Krais a ??crit : > > Hi Julien, > > > > >> I use Ekiga 2.0.3 in Ubuntu Feisty. > > > > > > Don\'t report bug about this version if you find any : you\'re *six* > > > *stable* *bugfix* releases behind! > > > > You\'re right. Do you think my problem will be solved using > > ekiga-snapshot from here: > > deb-src http://snapshots.ekiga.net/ubuntu/ feisty main > > It uses the version form yesterday: 20070916-04-feisty.1 > > > > It won\'t work, I need to implement something before and test it. > -- > _ Damien Sandras > (o- > //\\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list __________ Najpopul?rnej?? blog na Slovensku - http://blog.sme.sk/ From pratiksha.powar at onmobile.com Fri Sep 21 07:16:22 2007 From: pratiksha.powar at onmobile.com (Pratiksha Powar) Date: Fri, 21 Sep 2007 12:46:22 +0530 Subject: [Ekiga-list] Can I discuss Ekiga related problems through this mailing list? Message-ID: <1190358982.3362.14.camel@localhost.localdomain> From dsandras at seconix.com Fri Sep 21 07:53:11 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 21 Sep 2007 09:53:11 +0200 Subject: [Ekiga-list] Can I discuss Ekiga related problems through this mailing list? In-Reply-To: <1190358982.3362.14.camel@localhost.localdomain> References: <1190358982.3362.14.camel@localhost.localdomain> Message-ID: <1190361191.4106.6.camel@scorpion> Le vendredi 21 septembre 2007 ? 12:46 +0530, Pratiksha Powar a ?crit : > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list sure -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Fri Sep 21 07:58:59 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 21 Sep 2007 09:58:59 +0200 Subject: [Ekiga-list] installation problem with address book - local contacts In-Reply-To: <200709202142.50645.gsteng02@o2online.de> References: <200709202142.50645.gsteng02@o2online.de> Message-ID: <1190361539.4106.10.camel@scorpion> Hi, Le jeudi 20 septembre 2007 ? 21:42 +0200, G.Stengel a ?crit : > Hi, > > I'm quite new to ekiga, so sorry if I'm asking an obvious question: > I can't enter any contacts into ekiga's local address book, it always stays > empty, why? > > I've installed evolution-data-server-1.10.1 which I think is necessary. > Running ekiga from the command line gives messages like > > (ekiga:16328): libebook-WARNING **: Can't find installed BookFactories > > This happens on startup and if I try to add a contact. > > I'm running ekiga from KDE and have no completete GNOME system installed, > maybe some package is missing. However, all required libs seem to be there if > I type ldd /usr/bin/ekiga > > Some more info on my system: openSuse 10.2 64 bit, KDE 3.5.5, ekiga 2.0.9 > > Can anyone help? > I can only tell you that evolution-data-server is not correctly installed. I am sure a bit of googling will give you the instructions to follow to fix that issue, because it also affects evolution, not only ekiga. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pratiksha.powar at onmobile.com Fri Sep 21 09:03:56 2007 From: pratiksha.powar at onmobile.com (Pratiksha Powar) Date: Fri, 21 Sep 2007 14:33:56 +0530 Subject: [Ekiga-list] DTMF codecs supported by Ekiga Message-ID: <1190365436.3362.27.camel@localhost.localdomain> Hi Everybody, I'm using Ekiga for a corporate project. Using Ekiga I connect to a local server in my company which runs voice applications. I want to use Ekiga to test these applications. I use sip addresses like 123 at 172.16.18.69 etc. The server is unable to understand the DTMF PayLoad because the codec used by Ekiga is 101 and the one supported is 96. I receive the following error when i run : ekiga -d 2 -c 123 at 172.16.18.69 2007/09/21 14:28:12.849 0:11.431 SIP Transport:a2de7c8 SDP Media attribute rtpmap found for unknown RTP type [pt=96] Following is the server's log: INVITE sip:123 at 172.16.18.69 SIP/2.0 Date: Thu, 20 Sep 2007 10:33:47 GMT CSeq: 1 INVITE Via: SIP/2.0/UDP 172.16.18.92:5063;branch=z9hG4bK34ff8fa3-d265-dc11-996c-0019b97d3b5d;rport User-Agent: Ekiga/2.0.2 From: "Pratiksha Powar" ;tag=2c218fa3-d265-dc11-996c-0019b97d3b5d Call-ID: 76188fa3-d265-dc11-996c-0019b97d3b5d at Pratiksha To: Contact: Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE Content-Type: application/sdp Content-Length: 368 Max-Forwards: 70 v=0 o=- 1190284427 1190284427 IN IP4 172.16.18.92 s=Opal SIP Session c=IN IP4 172.16.18.92 t=0 0 m=audio 5004 RTP/AVP 101 114 115 3 107 110 0 8 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=rtpmap:114 SPEEX/16000 a=rtpmap:115 iLBC/8000 a=rtpmap:3 GSM/8000 a=rtpmap:107 MS-GSM/8000 a=rtpmap:110 SPEEX/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 I don't know much about codecs. Is there a version of Ekiga which can help me solve this problem? Currently I'm using Ekiga 2.0.2 on Gnome 2.16. Ekiga was a part of the CentOS 5.0 distribution. Thanks, Pratiksha From tux-spam at design-to-use.de Fri Sep 21 11:33:43 2007 From: tux-spam at design-to-use.de (Tobias Krais) Date: Fri, 21 Sep 2007 13:33:43 +0200 Subject: [Ekiga-list] Listening on different network interfaces In-Reply-To: <46F2F136.000001.07507@kamasutra> References: <46F2F136.000001.07507@kamasutra> Message-ID: <46F3AC17.3040406@design-to-use.de> Hi Palo, > I think that in the meantime, you can try to set up > Twinkle to do the job - it has the required feature > and I would bet that your sound quality problems > with it are connected with ALSA - try using OSS (ALSA > implementation in Twinkle does not seem to be the > best). At least for me, Twinkle has comparable > sound quality to Ekiga when using OSS. OSS supports my sound card only in half duplex mode. Thus I need to use ALSA for VoIP. Twinkle seems to support ALSA very well but does not support the good quality codecs Ekiga uses (PCMU). Thus speech quality is better in Ekiga. For this I will use Ekiga. Greetings, Tobias From dsandras at seconix.com Fri Sep 21 14:00:04 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 21 Sep 2007 16:00:04 +0200 Subject: [Ekiga-list] DTMF codecs supported by Ekiga In-Reply-To: <1190365436.3362.27.camel@localhost.localdomain> References: <1190365436.3362.27.camel@localhost.localdomain> Message-ID: <1190383204.4106.27.camel@scorpion> Le vendredi 21 septembre 2007 ? 14:33 +0530, Pratiksha Powar a ?crit : > Hi Everybody, > > I'm using Ekiga for a corporate project. > Using Ekiga I connect to a local server in my company which > runs voice applications. I want to use Ekiga to test these > applications. > > I use sip addresses like 123 at 172.16.18.69 etc. > The server is unable to understand the DTMF PayLoad because the codec > used by Ekiga is 101 and the one supported is 96. > > I receive the following error when i run : > > ekiga -d 2 -c 123 at 172.16.18.69 > > 2007/09/21 14:28:12.849 0:11.431 SIP Transport:a2de7c8 SDP > Media attribute rtpmap found for unknown RTP type [pt=96] > > Following is the server's log: > INVITE sip:123 at 172.16.18.69 SIP/2.0 > Date: Thu, 20 Sep 2007 10:33:47 GMT > CSeq: 1 INVITE > Via: SIP/2.0/UDP > 172.16.18.92:5063;branch=z9hG4bK34ff8fa3-d265-dc11-996c-0019b97d3b5d;rport > User-Agent: Ekiga/2.0.2 > From: "Pratiksha Powar" > ;tag=2c218fa3-d265-dc11-996c-0019b97d3b5d > Call-ID: 76188fa3-d265-dc11-996c-0019b97d3b5d at Pratiksha > To: > Contact: > Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,NOTIFY,REFER,MESSAGE > Content-Type: application/sdp > Content-Length: 368 > Max-Forwards: 70 > > v=0 > o=- 1190284427 1190284427 IN IP4 172.16.18.92 > s=Opal SIP Session > c=IN IP4 172.16.18.92 > t=0 0 > m=audio 5004 RTP/AVP 101 114 115 3 107 110 0 8 > a=rtpmap:101 telephone-event/8000 > a=fmtp:101 0-15 > a=rtpmap:114 SPEEX/16000 > a=rtpmap:115 iLBC/8000 > a=rtpmap:3 GSM/8000 > a=rtpmap:107 MS-GSM/8000 > a=rtpmap:110 SPEEX/8000 > a=rtpmap:0 PCMU/8000 > a=rtpmap:8 PCMA/8000 > > I don't know much about codecs. > Is there a version of Ekiga which can help me solve this problem? > Currently I'm using Ekiga 2.0.2 on Gnome 2.16. > Ekiga was a part of the CentOS 5.0 distribution. > You should upgrade to at least Ekiga 2.0.9 and upload a full -d 4 output somewhere. We will check it out. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sevmek at free.fr Fri Sep 21 16:52:45 2007 From: sevmek at free.fr (yannick) Date: Fri, 21 Sep 2007 18:52:45 +0200 Subject: [Ekiga-list] Listening on different network interfaces In-Reply-To: <46F3AC17.3040406@design-to-use.de> References: <46F2F136.000001.07507@kamasutra> <46F3AC17.3040406@design-to-use.de> Message-ID: <1190393565.9934.31.camel@achille> Le vendredi 21 septembre 2007 ? 13:33 +0200, Tobias Krais a ?crit : > Hi Palo, > > > I think that in the meantime, you can try to set up > > Twinkle to do the job - it has the required feature > > and I would bet that your sound quality problems > > with it are connected with ALSA - try using OSS (ALSA > > implementation in Twinkle does not seem to be the > > best). At least for me, Twinkle has comparable > > sound quality to Ekiga when using OSS. > > OSS supports my sound card only in half duplex mode. Thus I need to use > ALSA for VoIP. Twinkle seems to support ALSA very well but does not > support the good quality codecs Ekiga uses (PCMU). Thus speech quality > is better in Ekiga. For this I will use Ekiga. Let's be fair, Twinkle has PCMU too (just the name change): Twinkle supports the following audio codecs. (...) * G.711 ?-law (64 kbps payload, 8 kHz sampling rate) > > Greetings, Tobias > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From palos at post.sk Fri Sep 21 16:53:44 2007 From: palos at post.sk (Palo S.) Date: 21 Sep 2007 18:53:44 +0200 (CEST) Subject: [Ekiga-list] Listening on different network interfaces Message-ID: <46F3F718.000003.06700@kamasutra> First of all, I don\'t want to say what piece of software is better - I am happy with both Ekiga and Twinkle and use both of them frequently. I just wanted to point out that Twinkle has the requested feature and the sound quality should be comparable, at least in my experience it is, if I use OSS instead of ALSA default (using ALSA default, the mic provides bad quality and I thought that this could be your problem too). Regarding the codecs, Twinkle has, similarly to Ekiga, PCMU/PCMA and SPEEX 8/16kHZ and even SPEEX 32 kHz... __________ http://auto.sme.sk - V?etko o aut?ch (novinky, testy, autosal?n, auto?kola, porovnaj si auto) From ben-ekiga at bjencks.net Tue Sep 25 04:05:25 2007 From: ben-ekiga at bjencks.net (Ben Jencks) Date: Mon, 24 Sep 2007 21:05:25 -0700 Subject: [Ekiga-list] Strange connectivity problem Message-ID: I'm seeing a strange problem when I try to talk to a certain person. The 500 echo test works fine for me. When I try to call her, I get "user is unreachable" in the general log. She can call me and it goes through. During the call, I can hear her, video works both ways (albeit rather poorly), but she can't hear me. When she calls 500, she gets 23:49:59 Calling sip:500 at ekiga.net 23:51:02 Local user cleared the call in the general log. Neither of us is behind a NAT. I don't see what sort of firewall issues would let video work, but block voice in one direction. I'm using 2.0.9 on Feisty, she's using something recent (I'm not sure if it's 2.0.9 or 2.0.10beta) on Vista. -Ben Jencks From dsandras at seconix.com Tue Sep 25 07:35:00 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 25 Sep 2007 09:35:00 +0200 Subject: [Ekiga-list] Strange connectivity problem In-Reply-To: References: Message-ID: <1190705700.4620.0.camel@scorpion> Le lundi 24 septembre 2007 ? 21:05 -0700, Ben Jencks a ?crit : > I'm seeing a strange problem when I try to talk to a certain person. The > 500 echo test works fine for me. When I try to call her, I get "user is > unreachable" in the general log. She can call me and it goes > through. During the call, I can hear her, video works both ways (albeit > rather poorly), but she can't hear me. When she calls 500, she gets > > 23:49:59 Calling sip:500 at ekiga.net > 23:51:02 Local user cleared the call > > in the general log. > > Neither of us is behind a NAT. I don't see what sort of firewall issues > would let video work, but block voice in one direction. I'm using 2.0.9 > on Feisty, she's using something recent (I'm not sure if it's 2.0.9 or > 2.0.10beta) on Vista. > Could she provide a debug output ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From theftacademy at yahoo.com Tue Sep 25 08:50:49 2007 From: theftacademy at yahoo.com (The Financial Training Academy) Date: Tue, 25 Sep 2007 16:50:49 +0800 (CST) Subject: [Ekiga-list] CeMAP intensive course the financial training academy Message-ID: <195862.7089.qm@web44810.mail.sp1.yahoo.com> http://www.ftacademy.co.uk/ CeMAP certificate CeMAP course CeMAP course in London CeMAP course London CeMAP courses CeMAP financial advisors CeMAP financial advisor CeMAP financial qualification CeMAP financial qualifications CeMAP intensive course CeMAP intensive courses CeMAP intensive training CeMAP intensive training course CeMAP intensive training courses CeMAP London CeMAP financial advisor training CeMAP financial courses CeMAP financial training CeMAP mortgage advisor CeMAP mortgage advisors CeMAP nvq CeMAP nvq course CeMAP nvq training CeMAP The FSSC say ?If you can demonstrate that your training delivers results, you?ll want to make as much noise about it as possible.? Well, we do deliver, and we deliver quality, and we want to tell the world. ____________________________________________________________________________________ Got a little couch potato? Check out fun summer activities for kids. http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz -------------- next part -------------- An HTML attachment was scrubbed... URL: From nogueira at emc.ufsc.br Tue Sep 25 11:45:20 2007 From: nogueira at emc.ufsc.br (Antonio Carlos Ribeiro Nogueira) Date: Tue, 25 Sep 2007 08:45:20 -0300 Subject: [Ekiga-list] Exchanging video device through line command or config file. Message-ID: <46F8F4D0.7070102@emc.ufsc.br> I would like to change in a remote way the video device with ekiga running. May I do it with command line through ssh or even changing a file config in the remote computer from with I started ekiga? Thnaks in advance Antonio Carlos From dsandras at seconix.com Tue Sep 25 12:28:03 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 25 Sep 2007 14:28:03 +0200 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <46F8F4D0.7070102@emc.ufsc.br> References: <46F8F4D0.7070102@emc.ufsc.br> Message-ID: <1190723283.4620.38.camel@scorpion> Le mardi 25 septembre 2007 ? 08:45 -0300, Antonio Carlos Ribeiro Nogueira a ?crit : > I would like to change in a remote way the video device with ekiga > running. May I do it with command line through ssh or even changing a > file config in the remote computer from with I started ekiga? You can use gconftool-2. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sevmek at free.fr Tue Sep 25 15:14:04 2007 From: sevmek at free.fr (yannick) Date: Tue, 25 Sep 2007 17:14:04 +0200 Subject: [Ekiga-list] Strange connectivity problem In-Reply-To: <1190705700.4620.0.camel@scorpion> References: <1190705700.4620.0.camel@scorpion> Message-ID: <1190733244.9902.16.camel@achille> Le mardi 25 septembre 2007 ? 09:35 +0200, Damien Sandras a ?crit : > Could she provide a debug output ? Here is the howto debug under windows: http://wiki.ekiga.org/index.php/Debugging_Ekiga#Debugging_Ekiga_on_Windows She need to go until this: ekiga.exe -d 5 1>x 2>x Copy and paste this file somewhere, like here: http://pastebin.com/ And post the link in this thread. Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From nogueira at emc.ufsc.br Tue Sep 25 20:56:20 2007 From: nogueira at emc.ufsc.br (Antonio Carlos Ribeiro Nogueira) Date: Tue, 25 Sep 2007 17:56:20 -0300 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <1190723283.4620.38.camel@scorpion> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> Message-ID: <46F975F4.8040900@emc.ufsc.br> Sorry Damien, I am not a beginner but nor an expert as much on linux... :( May you help me showing how I could to change the BT878 Video ( *** UNKNOWN/GENER (2) to Generic Vimicro 303b in the /home/nogueira/.gconf/apps/ekiga/devices/video/%gconf.xml file? I guess that it is in this file I need to change the string, is it? What is the command using gconftool-2 should I use? Sorry for my poor english. It is difficult to me to explain my doubts. Thanks in advance again. Antonio Carlos Damien Sandras escreveu: > Le mardi 25 septembre 2007 ? 08:45 -0300, Antonio Carlos Ribeiro > Nogueira a ?crit : > >> I would like to change in a remote way the video device with ekiga >> running. May I do it with command line through ssh or even changing a >> file config in the remote computer from with I started ekiga? >> > > You can use gconftool-2. > From arsphl at Davidbowie.com Wed Sep 26 01:08:09 2007 From: arsphl at Davidbowie.com (Philippe Laliberte) Date: Wed, 26 Sep 2007 02:08:09 +0100 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <46F975F4.8040900@emc.ufsc.br> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> Message-ID: <46F9B0F9.5040002@Davidbowie.com> Hola Antonio, Haces una cambiado con este/ Just follow this example : A- verificar el valor actual/ see the actual value gconftool-2 --get /apps/ekiga/devices/video/input_device B- cambiar/change gconftool-2 --set --type=string /apps/ekiga/devices/video/input_device "Second Cam" C- Ocuspockus, como dices un amigo mio en la calle Garc?a Luna de Madrid gconftool-2 --get /apps/ekiga/devices/video/input_device Es todo en los paginas de manuales. man gconftool-2 Cheers, Philippe Antonio Carlos Ribeiro Nogueira wrote: > Sorry Damien, I am not a beginner but nor an expert as much on linux... :( > May you help me showing how I could to change the BT878 > Video ( *** UNKNOWN/GENER (2) to Generic > Vimicro 303b in the > /home/nogueira/.gconf/apps/ekiga/devices/video/%gconf.xml file? I guess > that it is in this file I need to change the string, is it? What is the > command using gconftool-2 should I use? Sorry for my poor english. It is > difficult to me to explain my doubts. > Thanks in advance again. > Antonio Carlos > > > Damien Sandras escreveu: > >> Le mardi 25 septembre 2007 ? 08:45 -0300, Antonio Carlos Ribeiro >> Nogueira a ?crit : >> >> >>> I would like to change in a remote way the video device with ekiga >>> running. May I do it with command line through ssh or even changing a >>> file config in the remote computer from with I started ekiga? >>> >>> >> You can use gconftool-2. >> >> > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -------------- next part -------------- A non-text attachment was scrubbed... Name: arsphl.vcf Type: text/x-vcard Size: 148 bytes Desc: not available URL: From nogueira at emc.ufsc.br Wed Sep 26 14:11:02 2007 From: nogueira at emc.ufsc.br (Antonio Carlos Ribeiro Nogueira) Date: Wed, 26 Sep 2007 11:11:02 -0300 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <46F9B0F9.5040002@Davidbowie.com> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> <46F9B0F9.5040002@Davidbowie.com> Message-ID: <46FA6876.8000100@emc.ufsc.br> Dear Philippe, it works, but only if I am not connected with another person. And I would like to change the device while I am connected to show him outside of my home... I have another cam installed outside. So I guess I should to disconnect with the person and then to connect again. But I don't know what string, int, or other key I should set and what values to use for it. Another problem is happening ist that, when I disconnect here, it is not disconnecting there. This happen when I left ekiga in automatic answer. Well, if you may help me again I thnaks in advantage. Antonio Carlos. Philippe Laliberte escreveu: > Hola Antonio, > > Haces una cambiado con este/ Just follow this example : > > A- verificar el valor actual/ see the actual value > > gconftool-2 --get /apps/ekiga/devices/video/input_device > > > B- cambiar/change > > gconftool-2 --set --type=string /apps/ekiga/devices/video/input_device > "Second Cam" > > C- Ocuspockus, como dices un amigo mio en la calle Garc?a Luna de Madrid > > gconftool-2 --get /apps/ekiga/devices/video/input_device > > Es todo en los paginas de manuales. > > man gconftool-2 > > Cheers, > > Philippe > > Antonio Carlos Ribeiro Nogueira wrote: >> Sorry Damien, I am not a beginner but nor an expert as much on >> linux... :( >> May you help me showing how I could to change the BT878 >> Video ( *** UNKNOWN/GENER (2) to Generic >> Vimicro 303b in the >> /home/nogueira/.gconf/apps/ekiga/devices/video/%gconf.xml file? I >> guess that it is in this file I need to change the string, is it? >> What is the command using gconftool-2 should I use? Sorry for my poor >> english. It is difficult to me to explain my doubts. >> Thanks in advance again. >> Antonio Carlos >> >> >> Damien Sandras escreveu: >> >>> Le mardi 25 septembre 2007 ? 08:45 -0300, Antonio Carlos Ribeiro >>> Nogueira a ?crit : >>> >>>> I would like to change in a remote way the video device with ekiga >>>> running. May I do it with command line through ssh or even changing >>>> a file config in the remote computer from with I started ekiga? >>>> >>> You can use gconftool-2. >>> >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> >> > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From dsandras at seconix.com Wed Sep 26 14:23:23 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 26 Sep 2007 16:23:23 +0200 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <46FA6876.8000100@emc.ufsc.br> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> <46F9B0F9.5040002@Davidbowie.com> <46FA6876.8000100@emc.ufsc.br> Message-ID: <1190816603.4233.25.camel@scorpion> Le mercredi 26 septembre 2007 ? 11:11 -0300, Antonio Carlos Ribeiro Nogueira a ?crit : > Dear Philippe, it works, but only if I am not connected with another > person. And I would like to change the device while I am connected to > show him outside of my home... I have another cam installed outside. So It is not implemented, you have to disconnect/reconnect in order for the change to take effect. > I guess I should to disconnect with the person and then to connect > again. But I don't know what string, int, or other key I should set and > what values to use for it. > Another problem is happening ist that, when I disconnect here, it is not > disconnecting there. This happen when I left ekiga in automatic answer. > Well, if you may help me again I thnaks in advantage. There is probably a network issue between you and him. Make sure you use the latest release of Ekiga (2.0.11 or 2.0.9) and not antic versions like 2.0.9. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From jpuydt at free.fr Wed Sep 26 16:03:01 2007 From: jpuydt at free.fr (Julien Puydt) Date: Wed, 26 Sep 2007 18:03:01 +0200 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <46FA6876.8000100@emc.ufsc.br> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> <46F9B0F9.5040002@Davidbowie.com> <46FA6876.8000100@emc.ufsc.br> Message-ID: <46FA82B5.2060904@free.fr> Antonio Carlos Ribeiro Nogueira a ?crit : > Dear Philippe, it works, but only if I am not connected with another > person. And I would like to change the device while I am connected to > show him outside of my home... This is : http://bugzilla.gnome.org/show_bug.cgi?id=339883 I only sketch what has to be done -- I didn't do any work towards that. Snark From geno999 at yahoo.com Wed Sep 26 16:06:21 2007 From: geno999 at yahoo.com (geno) Date: Wed, 26 Sep 2007 12:06:21 -0400 Subject: [Ekiga-list] Sound Problem Message-ID: <46FA837D.1040007@yahoo.com> I am running a full-duplex Audigy SB0090 sound card under Debian 4.0r1. Without Ekiga 2.0.9 running, anything spoken into the microphone comes immediately out of the speakers. When I run the audio test in the Configuration Druid, nothing comes out. There are no error messages. So far I have been unable to find in the Debian repositories the "rec" tool mentioned in the Ekiga documentation. Thoughts? Thanks. Geno From sevmek at free.fr Wed Sep 26 18:44:05 2007 From: sevmek at free.fr (yannick) Date: Wed, 26 Sep 2007 20:44:05 +0200 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <1190816603.4233.25.camel@scorpion> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> <46F9B0F9.5040002@Davidbowie.com> <46FA6876.8000100@emc.ufsc.br> <1190816603.4233.25.camel@scorpion> Message-ID: <1190832246.6744.1.camel@achille> Le mercredi 26 septembre 2007 ? 16:23 +0200, Damien Sandras a ?crit : > There is probably a network issue between you and him. Make sure you > use > the latest release of Ekiga (2.0.11 or 2.0.9) and not antic versions > like 2.0.9. You should read: not antic versions like 2.0.3. Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From nogueira at emc.ufsc.br Wed Sep 26 20:56:30 2007 From: nogueira at emc.ufsc.br (Antonio Carlos Ribeiro Nogueira) Date: Wed, 26 Sep 2007 17:56:30 -0300 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <46FA82B5.2060904@free.fr> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> <46F9B0F9.5040002@Davidbowie.com> <46FA6876.8000100@emc.ufsc.br> <46FA82B5.2060904@free.fr> Message-ID: <46FAC77E.9020807@emc.ufsc.br> Snark, I am not so good in linux up to point to "write a PFacadeSoundChannel, which you give to the codec & networking code as your audio device nor a PVideoInputDevice"... :-( But you can told me wich key (string or int) I should set through gconftoo-2 in order to disconnect remotely the other point of my connection I stablished with automatic answer. In all the cases, thanks for the help trying. Antonio Carlos Julien Puydt escreveu: > Antonio Carlos Ribeiro Nogueira a ?crit : > >> Dear Philippe, it works, but only if I am not connected with another >> person. And I would like to change the device while I am connected to >> show him outside of my home... >> > > This is : > http://bugzilla.gnome.org/show_bug.cgi?id=339883 > > I only sketch what has to be done -- I didn't do any work towards that. > > Snark > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From nogueira at emc.ufsc.br Wed Sep 26 21:02:37 2007 From: nogueira at emc.ufsc.br (Antonio Carlos Ribeiro Nogueira) Date: Wed, 26 Sep 2007 18:02:37 -0300 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <1190832246.6744.1.camel@achille> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> <46F9B0F9.5040002@Davidbowie.com> <46FA6876.8000100@emc.ufsc.br> <1190816603.4233.25.camel@scorpion> <1190832246.6744.1.camel@achille> Message-ID: <46FAC8ED.7020704@emc.ufsc.br> But I am running ekiga 2.0.9 in both computers under Mandriva Linux Spring 2007, it is not so too antic... Regards Antonio Carlos yannick escreveu: > Le mercredi 26 septembre 2007 ? 16:23 +0200, Damien Sandras a ?crit : > >> There is probably a network issue between you and him. Make sure you >> use >> the latest release of Ekiga (2.0.11 or 2.0.9) and not antic versions >> like 2.0.9. >> > > You should read: > not antic versions like 2.0.3. > > Regards, > Yannick > From dsandras at seconix.com Wed Sep 26 21:36:16 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 26 Sep 2007 23:36:16 +0200 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <46FAC77E.9020807@emc.ufsc.br> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> <46F9B0F9.5040002@Davidbowie.com> <46FA6876.8000100@emc.ufsc.br> <46FA82B5.2060904@free.fr> <46FAC77E.9020807@emc.ufsc.br> Message-ID: <1190842576.4145.20.camel@scorpion> Le mercredi 26 septembre 2007 ? 17:56 -0300, Antonio Carlos Ribeiro Nogueira a ?crit : > Snark, I am not so good in linux up to point to "write a > PFacadeSoundChannel, which you give to the codec & networking code as > your audio device nor a PVideoInputDevice"... :-( > But you can told me wich key (string or int) I should set through > gconftoo-2 in order to disconnect remotely the other point of my > connection I stablished with automatic answer. > In all the cases, thanks for the help trying. You can not do that using a preference stored in gconf. The only way to achieve that is to use the DBUS component of Ekiga and write a small python script to manipulate Ekiga. If you look in the mail archives, you will find a script posted by Julien allowing that kind of things. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Sep 26 21:36:57 2007 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 26 Sep 2007 23:36:57 +0200 Subject: [Ekiga-list] Exchanging video device through line command or config file. In-Reply-To: <46FAC8ED.7020704@emc.ufsc.br> References: <46F8F4D0.7070102@emc.ufsc.br> <1190723283.4620.38.camel@scorpion> <46F975F4.8040900@emc.ufsc.br> <46F9B0F9.5040002@Davidbowie.com> <46FA6876.8000100@emc.ufsc.br> <1190816603.4233.25.camel@scorpion> <1190832246.6744.1.camel@achille> <46FAC8ED.7020704@emc.ufsc.br> Message-ID: <1190842617.4145.22.camel@scorpion> Le mercredi 26 septembre 2007 ? 18:02 -0300, Antonio Carlos Ribeiro Nogueira a ?crit : > But I am running ekiga 2.0.9 in both computers under Mandriva Linux > Spring 2007, it is not so too antic... you have to check in the -d 4 output of the end that does not disconnect if a BYE message is being received -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From lurch at gmx.li Thu Sep 27 00:32:59 2007 From: lurch at gmx.li (Stefan Bruens) Date: Thu, 27 Sep 2007 02:32:59 +0200 Subject: [Ekiga-list] installation problem with address book - local contacts In-Reply-To: <200709202142.50645.gsteng02@o2online.de> References: <200709202142.50645.gsteng02@o2online.de> Message-ID: <200709270233.02031.lurch@gmx.li> > I'm running ekiga from KDE and have no completete GNOME system installed, > maybe some package is missing. However, all required libs seem to be there > if I type ldd /usr/bin/ekiga > > Some more info on my system: openSuse 10.2 64 bit, KDE 3.5.5, ekiga 2.0.9 I assume you have installed Ekiga from the BuildService? These packages no longer use /opt/gnome/ as prefix, but /usr. As a result, some parts of gnome are searched for in the wrong location. Make sure you have all gnome packages installed from the Buildservice, and are not mixing the packages from the DVD with the ones from the Buildservice. Greetings, Lurchi -- Stefan Br?ns / Kastanienweg 6 - Zimmer 1206 / 52074 Aachen mailto:lurch at gmx.li http://www.kawo1.rwth-aachen.de/~lurchi/ phone: +49 241 169-4206 mobile: +49 160 3797725 -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part. URL: From ctubbsii at emich.edu Thu Sep 27 02:15:45 2007 From: ctubbsii at emich.edu (Christopher L Tubbs II) Date: Wed, 26 Sep 2007 22:15:45 -0400 Subject: [Ekiga-list] Suggestion for Cropped Images Message-ID: <46FB1251.7010600@emich.edu> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello all, I'm new to the list and reviewed the archives, but I may have missed stuff, so forgive me if I'm repeating old stuff. Anyway, I have a Logitech QuickCam Communicate STX (046d:08d7) I noticed it has been previously discussed that these cameras (actually, any that use gspca driver, apparently) tend to return with a cropped image instead of an error to ekiga, causing ekiga to use the cropped image instead of choosing a larger resolution and scaling. This is definitely an issue for gspca (which, hopefully somebody working on that reads this). My concern, however, is that ekiga does not offer any options for manually configuring how it behaves regarding resolutions. Can an option be included to manually select the resolution that is scaled? Also, is there any plans for ekiga to support transmission of larger resolutions? I'd love to have my 640x480 sent or scaled to 320x240 or 176x144. Ekiga should support that. Question: what other resolutions does Ekiga support, and how do I switch between them? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iD8DBQFG+xJQyQYCx13q+8oRAgmsAJ9ofv4qzg5n7ao9tx7z3V+2JUUtzQCgxDNy 73C0r8iTAtjiMmDTBF67Ua8= =MAcm -----END PGP SIGNATURE----- From dsandras at seconix.com Thu Sep 27 15:59:33 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 27 Sep 2007 17:59:33 +0200 Subject: [Ekiga-list] Suggestion for Cropped Images In-Reply-To: <46FB1251.7010600@emich.edu> References: <46FB1251.7010600@emich.edu> Message-ID: <1190908773.18207.79.camel@scorpion> Hi, Le mercredi 26 septembre 2007 ? 22:15 -0400, Christopher L Tubbs II a ?crit : > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hello all, > > I'm new to the list and reviewed the archives, but I may have missed > stuff, so forgive me if I'm repeating old stuff. > > Anyway, I have a Logitech QuickCam Communicate STX (046d:08d7) > > I noticed it has been previously discussed that these cameras (actually, > any that use gspca driver, apparently) tend to return with a cropped > image instead of an error to ekiga, causing ekiga to use the cropped > image instead of choosing a larger resolution and scaling. This is > definitely an issue for gspca (which, hopefully somebody working on that > reads this). > > My concern, however, is that ekiga does not offer any options for > manually configuring how it behaves regarding resolutions. Can an option > be included to manually select the resolution that is scaled? Also, is > there any plans for ekiga to support transmission of larger resolutions? > I'd love to have my 640x480 sent or scaled to 320x240 or 176x144. Ekiga > should support that. > > Question: what other resolutions does Ekiga support, and how do I switch > between them? The development version of Ekiga will support all possible resolutions with codecs supporting those resolutions. The stable version does not support changing the resolution. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Sep 27 21:03:32 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 27 Sep 2007 23:03:32 +0200 Subject: [Ekiga-list] Ekiga 2.0.11 finally released Message-ID: <1190927012.4162.9.camel@scorpion> Hello, Ekiga 2.0.11 has finally been released on http://www.ekiga.org. Fixes in OPAL/PWLIB/Ekiga since 2.0.10: - Fixed V4L2 build. (Damien Sandras) - Killed GCC 4.2 warnings. (Damien Sandras) Fixes in OPAL/PWLIB/Ekiga since 2.0.9: - Fixed several interoperability issues due to bugs and limitations in CISCO Call Manager. (Damien Sandras, #429076) - Decreased the default NAT binding refresh timeout. (Damien Sandras) - Fixed interoperability issue with SER+rtpproxy. (Damien Sandras, #430870) - Fixed the check for the installed GTK+ version in the WIN32 installer. (Vincent Luba) - Fixed race condition when receiving an abnormal load of SIP text messages. (Damien Sandras) - Fixed possible crash when opening V4L devices with 352x288 fixed width capability. (Luc Saillard, #434223). - Better handling of ACK requests timeouts. (Damien Sandras) - Fixed QOP authentication issues. (#368524, Knut omang) - Fixed Assertion fail in SetAttribute() if empty formats list and don't use deleted media session info when parsing fails. (Craig Southeren) - Refresh video capabilities when appropriate in the V4L plugin. (Michael Smith) - Fixed problems with the sa7134 card and with newer kernels in the V4L2 plugin. (Michael Smith) - Do not use the loopback interface as possible interface on OpenSolaris. (Elaine Xiong from SUN, #439873) - Fixed routing of ACK requests sent for an INVITE with an original Route header. (Damien Sandras) - Optimized some color space conversions using MediaLib. (Elaine Xiong) - Fixed potential problems with MJPEG-based cameras. (Matthias Schneider) - Fixed possible remote crash due to fancy headers. (Jos? Miguel Esparza) Enjoy! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From romanantensteiner at gmx.at Thu Sep 27 21:43:23 2007 From: romanantensteiner at gmx.at (Roman Antensteiner) Date: Thu, 27 Sep 2007 23:43:23 +0200 Subject: [Ekiga-list] Looking for a VOIP/SIP client for windows that works with ekiga In-Reply-To: References: Message-ID: <1190929403.4834.7.camel@roman-desktop> We've tried different clients for hours on end... So I'd really like to hear from someone who has actually established a call between a SIP client on windows and Ekiga on Linux. The Ekiga alpha is no option - way too unstable. Wengophone will ring on both sides, and while it will show a connection on the ekiga side, it will disconnect on the wengophone side. And the chat only works one way (wengo -> ekiga). The wengophone client for linux won't work either... Almost exactly the same problem, but the chat works. Windows messanger... Couldn't figure out how to add a SIP contact! And you don't even get to use it until you register a msn account. That kind of disqualifies it. Various other messangers either crashed instantly, or appeared to be Adware Trojans of some kind. Skype works. Testcalling did also work on both sides (Ports are forewarded). From dsandras at seconix.com Thu Sep 27 21:46:53 2007 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 27 Sep 2007 23:46:53 +0200 Subject: [Ekiga-list] Looking for a VOIP/SIP client for windows that works with ekiga In-Reply-To: <1190929403.4834.7.camel@roman-desktop> References: <1190929403.4834.7.camel@roman-desktop> Message-ID: <1190929613.4162.33.camel@scorpion> Le jeudi 27 septembre 2007 ? 23:43 +0200, Roman Antensteiner a ?crit : > We've tried different clients for hours on end... So I'd really like to > hear from someone who has actually established a call between a SIP > client on windows and Ekiga on Linux. > The Ekiga alpha is no option - way too unstable. It should be stable enough to allow calls. What problems did you encounter ? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From mshahwan2001 at yahoo.com Fri Sep 28 03:40:06 2007 From: mshahwan2001 at yahoo.com (Michael) Date: Thu, 27 Sep 2007 20:40:06 -0700 (PDT) Subject: [Ekiga-list] call waiting Message-ID: <533767.24831.qm@web52409.mail.re2.yahoo.com> Damien: Do you have an ETA / road map of when it can be expected? Also a conference button to conference in line 1-6 would be a killer feature. ----- Original Message ---- From: Damien Sandras To: Ekiga mailing list Sent: Saturday, September 8, 2007 4:37:32 AM Subject: Re: [Ekiga-list] call waiting Le vendredi 07 septembre 2007 ? 21:34 -0700, Michael a ?crit : > Is there any way to have call waiting to work with Ekiga? So that I > can put line 1 on hold and grab line 2? It is not implemented yet. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list ____________________________________________________________________________________ Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out. http://answers.yahoo.com/dir/?link=list&sid=396545469 -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Fri Sep 28 07:37:46 2007 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 28 Sep 2007 09:37:46 +0200 Subject: [Ekiga-list] call waiting In-Reply-To: <533767.24831.qm@web52409.mail.re2.yahoo.com> References: <533767.24831.qm@web52409.mail.re2.yahoo.com> Message-ID: <1190965066.4188.2.camel@scorpion> Le jeudi 27 septembre 2007 ? 20:40 -0700, Michael a ?crit : > Damien: > > Do you have an ETA / road map of when it can be expected? Also a > conference button to conference in line 1-6 would be a killer feature. > Probably after 3.00, except if we receive a patch before. That would mean after 2008. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From pratiksha.powar at onmobile.com Fri Sep 28 11:20:44 2007 From: pratiksha.powar at onmobile.com (Pratiksha Powar) Date: Fri, 28 Sep 2007 16:50:44 +0530 Subject: [Ekiga-list] Want to install Ekiga 2.0.11 on CentOS5 In-Reply-To: <1190929613.4162.33.camel@scorpion> References: <1190929403.4834.7.camel@roman-desktop> <1190929613.4162.33.camel@scorpion> Message-ID: <1190978444.3352.17.camel@localhost.localdomain> Damien, I already have Opal and PWLib installed on my system. I use CentOS 5, base arch i386. I want that version of Ekiga which uses Codec 96 for DTMF coding, so that I can send a SIP message as follows: a=rtpmap:96 telephone-event/8000 instead of a=rtpmap:101 telephone-event/8000 I couldn't find any conf file which will allow me to change the codec used. You had suggested installing Ekiga 2.0.9, but the binaries available on http://www.gnomemeeting.org/?rub=5 are not compatible with CentOS or Red Hat. I downloaded the source files but there doesn't exist a help file on how to compile them. Is there a way I could install Ekiga using yum? Yum will require a trusted Ekiga repository which holds the folders repodata, so that it can download the following files: filelists.xml.gz other.xml.gz primary.xml.gz repomd.xml Can you provide any such site? ~Thanks, Pratiksha -------------- next part -------------- ============================== DISCLAIMER: The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. Further, this e-mail may contain viruses and all reasonable precaution to minimize the risk arising there from is taken by OnMobile. OnMobile is not liable for any damage sustained by you as a result of any virus in this e-mail. All applicable virus checks should be carried out by you before opening this e-mail or any attachment thereto. Thank you - OnMobile Global Limited. ============================== From rkombiyil at yahoo.com Fri Sep 28 13:23:31 2007 From: rkombiyil at yahoo.com (Raj Kombiyil) Date: Fri, 28 Sep 2007 06:23:31 -0700 (PDT) Subject: [Ekiga-list] problem with windows version of Ekiga Message-ID: <690855.29672.qm@web54407.mail.yahoo.com> Dear List members, Greetings! I wanted to see if I could call between windoze and gnu/linux boxes - hence I downloaded and installed the latest windows version (2.0.22-Beta) on a windows (xp sp2) box. Btw, I have no problem with the GNU/Linux side, meaning *no* Conn timed out error! But when I tried to register, it failed- with the error message - *Connection timed out*. (I have turned the firewall off) The STUN test came out to be "Open NAT" and I tried different options in the Edit --> Preferences --> NAT Traversal, i.e., NONE and STUN both.. No luck. I have firewall turned off, what must be causing the conn timed out? I am connected using DSL (pppoe). Any help appreciated. Thanks for your time, /rk P.S. I would appreciate it if you could kindly cc the reply to this addy. ____________________________________________________________________________________ Moody friends. Drama queens. Your life? Nope! - their life, your story. Play Sims Stories at Yahoo! Games. http://sims.yahoo.com/ From vincent_luba at colombus.org Fri Sep 28 15:13:41 2007 From: vincent_luba at colombus.org (Vincent Luba) Date: Fri, 28 Sep 2007 17:13:41 +0200 Subject: [Ekiga-list] problem with windows version of Ekiga In-Reply-To: <690855.29672.qm@web54407.mail.yahoo.com> References: <690855.29672.qm@web54407.mail.yahoo.com> Message-ID: <46FD1A25.3050600@colombus.org> Hey, Raj Kombiyil a ?crit : > Dear List members, > [...] > The STUN test came out to be "Open NAT" and I tried > different options in the Edit --> Preferences --> NAT > Traversal, i.e., NONE and STUN both.. No luck. I have > firewall turned off, what must be causing the conn > timed out? I am connected using DSL (pppoe). > > Is Ekiga configured to use the right network interface? You may also double check your Account settings, maybe typo in the hostname... Plus, -d 4 output would be help people assist you. Vincent -------------- next part -------------- An HTML attachment was scrubbed... URL: From zach at zzelinski.com Sat Sep 29 00:25:12 2007 From: zach at zzelinski.com (Zachary Zelinski) Date: Fri, 28 Sep 2007 17:25:12 -0700 Subject: [Ekiga-list] ekiga 2.0.11 install Message-ID: <86e56ee40709281725i2a49ba52re4ba0656f3b5afe8@mail.gmail.com> Using Ubuntu Feisty. I have installed pwlib and opal from the files in the download section of the Ekiga site. When I try to install ekiga using ,./configure, make, and make install, it says I need the opal headers. So I go to my synaptic package manager and install the opal-dev package there, but it says I need to install opal-2.2.0. I cannot install one without the other. So I do that, and now ekiga "./configure" is telling me I have the wrong version of Opal. How do I get the newest opal headers so I can install ekiga? Do you have a tar.gz of these headers that I might be able to use? I need them as soon as possible! Thanks, Zach -------------- next part -------------- An HTML attachment was scrubbed... URL: From mcs1 at ntlworld.com Sat Sep 29 09:47:07 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Sat, 29 Sep 2007 10:47:07 +0100 (BST) Subject: [Ekiga-list] Ekiga 2.0.11 finally released In-Reply-To: <1190927012.4162.9.camel@scorpion> References: <1190927012.4162.9.camel@scorpion> Message-ID: <18662247.281191059227961.OPEN-XCHANGE.WebMail.nobody@sam> Thank you for that. Do you plan to have a debian package as well? Cheers Michael On Thu 27.09.2007 22:03, Damien Sandras wrote: >Hello, > > >Ekiga 2.0.11 has finally been released on http://www.ekiga.org. > >Fixes in OPAL/PWLIB/Ekiga since 2.0.10: >- Fixed V4L2 build. (Damien Sandras) >- Killed GCC 4.2 warnings. (Damien Sandras) > >Fixes in OPAL/PWLIB/Ekiga since 2.0.9: >- Fixed several interoperability issues due to bugs and limitations in >CISCO Call Manager. (Damien Sandras, #429076) >- Decreased the default NAT binding refresh timeout. (Damien Sandras) >- Fixed interoperability issue with SER+rtpproxy. (Damien Sandras, >#430870) >- Fixed the check for the installed GTK+ version in the WIN32 >installer. (Vincent Luba) >- Fixed race condition when receiving an abnormal load of SIP text >messages. (Damien Sandras) >- Fixed possible crash when opening V4L devices with 352x288 fixed >width capability. (Luc Saillard, #434223). >- Better handling of ACK requests timeouts. (Damien Sandras) >- Fixed QOP authentication issues. (#368524, Knut omang) >- Fixed Assertion fail in SetAttribute() if empty formats list and >don't use deleted media session info when parsing fails. (Craig >Southeren) >- Refresh video capabilities when appropriate in the V4L plugin. >(Michael Smith) >- Fixed problems with the sa7134 card and with newer kernels in the >V4L2 plugin. (Michael Smith) >- Do not use the loopback interface as possible interface on >OpenSolaris. (Elaine Xiong from SUN, #439873) >- Fixed routing of ACK requests sent for an INVITE with an original >Route header. (Damien Sandras) >- Optimized some color space conversions using MediaLib. (Elaine Xiong) >- Fixed potential problems with MJPEG-based cameras. (Matthias >Schneider) >- Fixed possible remote crash due to fancy headers. (Jos? Miguel >Esparza) > >Enjoy! >-- >_ Damien Sandras >(o- >//\ Ekiga Softphone : http://www.ekiga.org/ >v_/_ NOVACOM : http://www.novacom.be/ >FOSDEM : http://www.fosdem.org/ >SIP Phone : sip:dsandras at ekiga.net > > >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From dsandras at seconix.com Sat Sep 29 09:46:05 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 29 Sep 2007 11:46:05 +0200 Subject: [Ekiga-list] Ekiga 2.0.11 finally released In-Reply-To: <18662247.281191059227961.OPEN-XCHANGE.WebMail.nobody@sam> References: <1190927012.4162.9.camel@scorpion> <18662247.281191059227961.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <1191059165.4146.8.camel@scorpion> Le samedi 29 septembre 2007 ? 10:47 +0100, Michael Stockenhuber a ?crit : > Thank you for that. > > Do you plan to have a debian package as well? > Cheers They are already in sid. Mirroring on ekiga.org is coming soon. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sat Sep 29 09:52:16 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 29 Sep 2007 11:52:16 +0200 Subject: [Ekiga-list] Congratulations + some soundproblem using Ekiga under Linux In-Reply-To: <200709290040.35955.Ch_Belle@web.de> References: <200709290040.35955.Ch_Belle@web.de> Message-ID: <1191059536.4146.14.camel@scorpion> Hi, Le samedi 29 septembre 2007 ? 00:40 +0200, Christian Belle a ?crit : > Hi Damien ! > > I have tried quite a few phone tools under Linux, but I like the usage of > Ekiga best. > > However after installing it (Suse 10.2, 64 Bit version, used soundcard intel > ICH 7) I had the problem that the sound quality would be pretty poor: the > high frequencies were lacking in such a manner that I (and the person I > talked to) sounded as if we had a speech problem keeping us from properly > pronouncing "s" and similar sounds. > > (Recording and playing sound with other applications was never a problem in > spite of the old Alsa drivers... also using the microphone of my headset) > > This was about half a year ago, using google I found out that this Intel > Chipset had problems with some ALSA drivers under Linux, so I postponed > the "problem". > > Now I upgraded to the latest Ekiga (2.0.11) and the latest ALSA drivers. The > progress was that the (really) useful internal Ekiga soundcheck now shows > _perfect_(!) quality (even better than skype) but when calling 500 at ekiga.net > or when using my german provider (1&1) to call my analogue mailbox, the sound > problem still exists. The druid audio test works in wideband mode (16 kHz), while the german provider or 500 at ekiga.net require narrowband mode (8 kHz). Skype always uses 16 kHz, while most SIP providers use the 8 kHz mode. What I think is that you might have a problem with ALSA recording at 8 kHz, which would explain the problem. A suggestion would be to remap the "default" ALSA device like explained here : http://wiki.ekiga.org/index.php/Getting_several_applications_using_the_sound_card_at_the_same_time_%3F You will then configure Ekiga to use the "default" device, and it should work. You can change settings like : rate 44100 It will force the hardware capture and playback to occur at 44.1 kHz, and the conversion to 8kHz will be done by the software. Most probably that it is better to do it by the software than by the hardware as you experience problem in the latter case. CC'ing the users list as it might be interesting (could you subscribe and continue the thread there ?) Thanks, -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From mcs1 at ntlworld.com Sat Sep 29 10:22:45 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Sat, 29 Sep 2007 11:22:45 +0100 (BST) Subject: [Ekiga-list] Ekiga 2.0.11 finally released In-Reply-To: <1191059165.4146.8.camel@scorpion> References: <1190927012.4162.9.camel@scorpion> <18662247.281191059227961.OPEN-XCHANGE.WebMail.nobody@sam> <1191059165.4146.8.camel@scorpion> Message-ID: <2991526.301191061365687.OPEN-XCHANGE.WebMail.nobody@sam> Thank you very much, I have not spotted it yet. But only for i386. Maybe I can build it myself on the amd64 (if I find the source packages for debian) Cheers Michael On Sat 29.09.2007 10:46, Damien Sandras wrote: > >Le samedi 29 septembre 2007 ? 10:47 +0100, Michael Stockenhuber a >?crit : >>Thank you for that. >> >>Do you plan to have a debian package as well? >>Cheers > >They are already in sid. Mirroring on ekiga.org is coming soon. >-- >_ Damien Sandras >(o- >//\ Ekiga Softphone : http://www.ekiga.org/ >v_/_ NOVACOM : http://www.novacom.be/ >FOSDEM : http://www.fosdem.org/ >SIP Phone : sip:dsandras at ekiga.net > > >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From mcs1 at ntlworld.com Sat Sep 29 16:30:46 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Sat, 29 Sep 2007 17:30:46 +0100 (BST) Subject: [Ekiga-list] Sound Problem In-Reply-To: <46FA837D.1040007@yahoo.com> References: <46FA837D.1040007@yahoo.com> Message-ID: <2791549.311191083446101.OPEN-XCHANGE.WebMail.nobody@sam> Hi, I had a similar problem in debian with a cs46xx sound card. The adc was switched off in kmix, switching it on sorted it. Cheers Michael On Wed 26.09.2007 17:06, geno wrote: >I am running a full-duplex Audigy SB0090 sound card under Debian 4.0r1. >Without Ekiga 2.0.9 running, anything spoken into the microphone comes >immediately out of the speakers. When I run the audio test in the >Configuration Druid, nothing comes out. There are no error messages. >So far I have been unable to find in the Debian repositories the "rec" >tool mentioned in the Ekiga documentation. Thoughts? Thanks. > >Geno >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From lists at dcorking.com Sat Sep 29 18:46:14 2007 From: lists at dcorking.com (David Corking) Date: Sat, 29 Sep 2007 19:46:14 +0100 Subject: [Ekiga-list] ekiga 2.0.11 install In-Reply-To: <86e56ee40709281725i2a49ba52re4ba0656f3b5afe8@mail.gmail.com> References: <86e56ee40709281725i2a49ba52re4ba0656f3b5afe8@mail.gmail.com> Message-ID: Hello Zach On 9/29/07, Zachary Zelinski wrote: > Using Ubuntu Feisty. I have installed pwlib and opal from the files in the > download section of the Ekiga site. When I try to install ekiga using > ,./configure, make, and make install, it says I need the opal headers. So I > go to my synaptic package manager and install the opal-dev package there, > but it says I need to install opal-2.2.0. I cannot install one without the > other. So I do that, and now ekiga "./configure" is telling me I have the > wrong version of Opal. > > How do I get the newest opal headers so I can install ekiga? Do you have a > tar.gz of these headers that I might be able to use? I need them as soon as > possible! It is easiest to either get all three as deb packages (ekiga opal and pwlib) or to compile all three from source (./configure, make etc) to make sure you have matching versions. So I suggest you remove those header packages that synaptic found, and then install the ekiga deb from http://www.ekiga.org/ Reason to get all packages from the same place is that many recent ekiga bug fixes are actually not in ekiga but in opal and pwlib. Therefore the pwlib and opal packages on www.ekiga.org are actually development snapshots, rather that official releases - these snapshots match ekiga best. 2.0.9 packages for Ubuntu are at http://www.ekiga.org/ 2.0.11 packages in Debian sid may also interest you. David From zach at zzelinski.com Sat Sep 29 22:18:26 2007 From: zach at zzelinski.com (Zachary Zelinski) Date: Sat, 29 Sep 2007 15:18:26 -0700 Subject: [Ekiga-list] ekiga 2.0.11 install In-Reply-To: References: <86e56ee40709281725i2a49ba52re4ba0656f3b5afe8@mail.gmail.com> Message-ID: <86e56ee40709291518p326f89ddo9002a834e3fee6c4@mail.gmail.com> Thanks for the information, but I do already have all three packages from ekiga.org. The issue is not those packages, it is that during my ekiga build, it says I cannot continue because the build requires the opal headers. There is a version of the opal-dev package in synaptic, but that version of the headers requires that I install an older version of opal, effectively stopping my ekiga installation. Is there a place to get the opal headers that match the 2.2.11 opal files? This is what I need to continue building ekiga. Thanks! On 9/29/07, David Corking wrote: > > Hello Zach > > On 9/29/07, Zachary Zelinski wrote: > > Using Ubuntu Feisty. I have installed pwlib and opal from the files in > the > > download section of the Ekiga site. When I try to install ekiga using > > ,./configure, make, and make install, it says I need the opal headers. > So I > > go to my synaptic package manager and install the opal-dev package > there, > > but it says I need to install opal-2.2.0. I cannot install one without > the > > other. So I do that, and now ekiga "./configure" is telling me I have > the > > wrong version of Opal. > > > > How do I get the newest opal headers so I can install ekiga? Do you have > a > > tar.gz of these headers that I might be able to use? I need them as soon > as > > possible! > > It is easiest to either get all three as deb packages (ekiga opal and > pwlib) or to compile all three from source (./configure, make etc) to > make sure you have matching versions. > > So I suggest you remove those header packages that synaptic found, and > then install the ekiga deb from http://www.ekiga.org/ > > Reason to get all packages from the same place is that many recent > ekiga bug fixes are actually not in ekiga but in opal and pwlib. > Therefore the pwlib and opal packages on www.ekiga.org are actually > development snapshots, rather that official releases - these snapshots > match ekiga best. > > 2.0.9 packages for Ubuntu are at http://www.ekiga.org/ > > 2.0.11 packages in Debian sid may also interest you. > > David > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ctubbsii at emich.edu Sun Sep 30 03:14:31 2007 From: ctubbsii at emich.edu (Christopher L Tubbs II) Date: Sat, 29 Sep 2007 23:14:31 -0400 Subject: [Ekiga-list] Microphone issue Message-ID: <46FF1497.2020204@emich.edu> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello all, I'm having a bit of trouble installing setting up my USB audio microphone built into my webcam (Logitech QuickCam Communicate STX) to work with Ekiga. I'm using the latest 2.0.11 with matching dependencies on Fedora 7/i686. I've got it working perfectly using my laptop (snd-hda-intel as output device, snd-usb-audio as input). However, on my desktop (snd-intel8x0 for output, snd-usb-audio as input, using same webcam), I am unable to pick up any audio from the microphone. The test during the configuration druid works perfectly. However, when I'm in a call, it does not pick up any audio. I've checked ALSA's mute toggle for the mic, as well as Ekiga's settings, and can't see what's wrong. I realize that the problem may be in the way the audio devices are configured, and not with Ekiga, but considering the test works, but a call doesn't, I think it is more likely that Ekiga is changing some ALSA settings when I start a call, perhaps conflicting with GNOME's settings (for example, I notice sometimes that Ekiga will mute my microphone on my laptop upon startup, when it has already been unmuted by GNOME). Any suggestions for troubleshooting would be helpful. I'll gladly provide more specific configuration details if it will help. Chris -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iD8DBQFG/xSWyQYCx13q+8oRAiHlAKCQnC2Ke45Pwnh8xGVrvLlOL+jK0wCgq07X i7VTdUo+OquhrLxJkjz9mMs= =i8X1 -----END PGP SIGNATURE----- From sevmek at free.fr Sun Sep 30 06:58:22 2007 From: sevmek at free.fr (yannick) Date: Sun, 30 Sep 2007 08:58:22 +0200 Subject: [Ekiga-list] Microphone issue In-Reply-To: <46FF1497.2020204@emich.edu> References: <46FF1497.2020204@emich.edu> Message-ID: <1191135503.6744.17.camel@achille> Hi, Let's be sure the audio test is right: Do you have a 4 seconds delay during the druid test? During a call your network configuration can prevent the audio datas to reach your peer. We need a debug output : Please send start ekiga in a terminal like this $ ekiga -d 4 place the call ( sip:500 at ekiga.net is an echo test) copy & paste the terminal output somewhere (like here : http://pastebin.com/ ) and give us the URL here. Regards, Yannick Le samedi 29 septembre 2007 ? 23:14 -0400, Christopher L Tubbs II a ?crit : > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hello all, > > I'm having a bit of trouble installing setting up my USB audio > microphone built into my webcam (Logitech QuickCam Communicate STX) to > work with Ekiga. I'm using the latest 2.0.11 with matching dependencies > on Fedora 7/i686. > > I've got it working perfectly using my laptop (snd-hda-intel as output > device, snd-usb-audio as input). > > However, on my desktop (snd-intel8x0 for output, snd-usb-audio as input, > using same webcam), I am unable to pick up any audio from the > microphone. The test during the configuration druid works perfectly. > However, when I'm in a call, it does not pick up any audio. I've checked > ALSA's mute toggle for the mic, as well as Ekiga's settings, and can't > see what's wrong. > > I realize that the problem may be in the way the audio devices are > configured, and not with Ekiga, but considering the test works, but a > call doesn't, I think it is more likely that Ekiga is changing some ALSA > settings when I start a call, perhaps conflicting with GNOME's settings > (for example, I notice sometimes that Ekiga will mute my microphone on > my laptop upon startup, when it has already been unmuted by GNOME). Any > suggestions for troubleshooting would be helpful. I'll gladly provide > more specific configuration details if it will help. > > Chris > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.7 (GNU/Linux) > Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org > > iD8DBQFG/xSWyQYCx13q+8oRAiHlAKCQnC2Ke45Pwnh8xGVrvLlOL+jK0wCgq07X > i7VTdUo+OquhrLxJkjz9mMs= > =i8X1 > -----END PGP SIGNATURE----- > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Sun Sep 30 08:19:04 2007 From: sevmek at free.fr (yannick) Date: Sun, 30 Sep 2007 10:19:04 +0200 Subject: [Ekiga-list] Someone is giving false informations about Ekiga on windows download websites Message-ID: <1191140344.6744.26.camel@achille> Hi, Someone has made a very bad review for download website about ekiga 2.0.11, check this mess: http://www.google.com/search?q=ekiga+voip+communicator+2.0.11 I don't know yet where it came from but I really dislike this mess. Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Sun Sep 30 10:41:02 2007 From: sevmek at free.fr (yannick) Date: Sun, 30 Sep 2007 12:41:02 +0200 Subject: [Ekiga-list] Someone is giving false informations about Ekiga on windows download websites In-Reply-To: <1191140344.6744.26.camel@achille> References: <1191140344.6744.26.camel@achille> Message-ID: <1191148862.6744.50.camel@achille> kphone has the same problem : http://www.google.com/search?q=Voip+Communicator+4.2 Description is the same. This time screenshots link sometimes here: http://www.siphome.de/img/software/kphone_linux/kphone-pref-sip-socket.gif For me the source may be http://www.siphome.de Regards, Yannick Le dimanche 30 septembre 2007 ? 10:19 +0200, yannick a ?crit : > Hi, > > Someone has made a very bad review for download website about ekiga > 2.0.11, check this mess: > http://www.google.com/search?q=ekiga+voip+communicator+2.0.11 > > I don't know yet where it came from but I really dislike this mess. > > Regards, > Yannick > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Sun Sep 30 10:56:57 2007 From: sevmek at free.fr (yannick) Date: Sun, 30 Sep 2007 12:56:57 +0200 Subject: [Ekiga-list] Someone is giving false informations about Ekiga on windows download websites In-Reply-To: <1191148862.6744.50.camel@achille> References: <1191140344.6744.26.camel@achille> <1191148862.6744.50.camel@achille> Message-ID: <1191149817.6744.52.camel@achille> And minisip too: http://www.google.com/search?q=minisip+0.7+siphome Well, we all get the picture I guess... Le dimanche 30 septembre 2007 ? 12:41 +0200, yannick a ?crit : > kphone has the same problem : > http://www.google.com/search?q=Voip+Communicator+4.2 > Description is the same. > > This time screenshots link sometimes here: > http://www.siphome.de/img/software/kphone_linux/kphone-pref-sip-socket.gif > > For me the source may be http://www.siphome.de > > Regards, > Yannick > > Le dimanche 30 septembre 2007 ? 10:19 +0200, yannick a ?crit : > > Hi, > > > > Someone has made a very bad review for download website about ekiga > > 2.0.11, check this mess: > > http://www.google.com/search?q=ekiga+voip+communicator+2.0.11 > > > > I don't know yet where it came from but I really dislike this mess. > > > > Regards, > > Yannick > > -- > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > sip:yannick at ekiga.net > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Sun Sep 30 11:20:31 2007 From: sevmek at free.fr (yannick) Date: Sun, 30 Sep 2007 13:20:31 +0200 Subject: [Ekiga-list] Someone is giving false informations about Ekiga on windows download websites In-Reply-To: <1191149817.6744.52.camel@achille> References: <1191140344.6744.26.camel@achille> <1191148862.6744.50.camel@achille> <1191149817.6744.52.camel@achille> Message-ID: <1191151231.6744.56.camel@achille> It seems it started with x-lite: http://www.google.com/search?q=Counterpath+siphome on 2007-07-26 That's why we have sometimes this erroneous description for EKiga: "Ekiga's is the market's leading free SIP based softphone available for download. Based on the advanced architecture of eyeBeam 1.5 (Phoner's carrier grade telephony client), the new Phoner is designed to showcase some of the feature rich capabilities" They just changed the name of the software each time... Regards, Yannick Le dimanche 30 septembre 2007 ? 12:56 +0200, yannick a ?crit : > And minisip too: > http://www.google.com/search?q=minisip+0.7+siphome > > Well, we all get the picture I guess... > > Le dimanche 30 septembre 2007 ? 12:41 +0200, yannick a ?crit : > > kphone has the same problem : > > http://www.google.com/search?q=Voip+Communicator+4.2 > > Description is the same. > > > > This time screenshots link sometimes here: > > http://www.siphome.de/img/software/kphone_linux/kphone-pref-sip-socket.gif > > > > For me the source may be http://www.siphome.de > > > > Regards, > > Yannick > > > > Le dimanche 30 septembre 2007 ? 10:19 +0200, yannick a ?crit : > > > Hi, > > > > > > Someone has made a very bad review for download website about ekiga > > > 2.0.11, check this mess: > > > http://www.google.com/search?q=ekiga+voip+communicator+2.0.11 > > > > > > I don't know yet where it came from but I really dislike this mess. > > > > > > Regards, > > > Yannick > > > -- > > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > > sip:yannick at ekiga.net > > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -- > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > sip:yannick at ekiga.net > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From rkombiyil at yahoo.com Sun Sep 30 12:29:41 2007 From: rkombiyil at yahoo.com (Raj Kombiyil) Date: Sun, 30 Sep 2007 05:29:41 -0700 (PDT) Subject: [Ekiga-list] problem with windows version of Ekiga Message-ID: <721646.4777.qm@web54409.mail.yahoo.com> Hi Vincent, Thanks for taking time off to write.. I apologize for the late reply... Anyway, there is *no* change in my situation - on a gnu/linux desktop, I could register and use ekiga without any problem (audio/video works fine between gnu/linux machines). I installed it on my laptop which uses an onboard ethernet controller (the first time it recognized correctly, I can't figure out where these configuration files are stored in -- I am not much of a windows person.. In linux, it is inside .gconf directory. Anyway, I purged the windows installation and reinstalled it couple of times - no luck. I can't remember where it threw the name of the onboard ehternet controller (network) at me.. And I can't make out where to give the -d 4 option which you mentioned? I tried to give it at the *run* command window as: \ekiga.exe -d 4 I checked other options with the conf wizard again. Where are all these user specific files stored? Anyway, does anybody else experience similar problems? Thanks for any help/tips, rk P.S. Though I am subscribed, I have disabled getting emails from the list for now. Hence kindly reply to this addy. Thanks. ____________________________________________________________________________________ Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. http://farechase.yahoo.com/ From iris.gates at gmail.com Sun Sep 30 15:42:38 2007 From: iris.gates at gmail.com (E Johnson) Date: Sun, 30 Sep 2007 11:42:38 -0400 Subject: [Ekiga-list] Ekiga 2.0.09 in Feisty? Message-ID: <70541d1e0709300842p3c916bceu7b37e8644ef9b760@mail.gmail.com> We are trying to install a newer Ekiga in order to get rid of bad sound between PC running Debian Etch (me) and PC running Ubuntu Feisty (him). We had Ekiga 2.0.03 working but the sound was unacceptable. Understood from reading help messages that we shoud at least use a newer version, Ekiga 2.0.09. Before we installed that, Ekiga 2.0.11 was made available, so we tried installing it, instead. But the Feisty system has a dependencies problem with PWLib when installing 2.0.11 from the source packages. What happened: Opal installed okay. PWLib installed okay after getting dependencies from Synaptic. Ekiga 2.0.11 would not Configure.The error message was: configure: error: Sorry but the PWLib version you are using doesn't support LDAP Then I read messages here today, that recommend installing Opal, PWLib and Ekiga from the Snapshots page. Okay that makes sense, thanks. But I see on the Ekiga - CVS Snapshots page, that there are no snapshots for Ubuntu Feisty. Can someone running Feisty use another version of Ekiga and Opal and PWLib that is on the Snapshots page? Will snapshots be made available for Feisty? Meanwhile, will one of the other versions on the Snapshots page work in Feisty? Thanks Liz J -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sun Sep 30 16:15:37 2007 From: sevmek at free.fr (yannick) Date: Sun, 30 Sep 2007 18:15:37 +0200 Subject: [Ekiga-list] Ekiga 2.0.09 in Feisty? In-Reply-To: <70541d1e0709300842p3c916bceu7b37e8644ef9b760@mail.gmail.com> References: <70541d1e0709300842p3c916bceu7b37e8644ef9b760@mail.gmail.com> Message-ID: <1191168937.6744.66.camel@achille> Hi, Snapshot is development snapshot, not meant for production. You can install them by adding this line to your source.list: deb http://snapshots.ekiga.net/ubuntu/ feisty main To compile take a look here: http://wiki.ekiga.org/index.php/Talk:Additional_Information#How_did_I_compiled_Ekiga_on_Ubuntu_feisty what you missed is this before compiling PwLib: $ sudo apt-get install libldap2-dev try to install those packages first on feisty, and you should be fine: build-essential libldap2 libldap2-dev flex bison autogen gnome-common automake1.8 libgconf2-4 libgconf2-dev libsdl1.2debian-alsa libsdl1.2-dev libgnome2-0 libgnome2-dev libgnomeui-0 libgnomeui-dev libebook1.2-9 libebook1.2-dev libdbus-glib-1-2 libdbus-glib-1-dev libdv4-dev libdv4 libdc1394-13 libdc1394-13-dev libavc1394-0 libavc1394-dev libraw1394-8 libraw1394-dev avahi-daemon libavahi-client3 libavahi-client-dev libavahi-common3 libavahi-common-data libavahi-common-dev libavahi-glib1 libavahi-glib-dev libavahi-core5 libsigc++-2.0-dev yelp or you can install prebuild packages for 2.0.9 (feisty, x86) by adding this line to your source.list: deb http://www.ekiga.org/admin/downloads/2.0.9/ubuntu/feisty_x86/ ./ Regards, Yannick Le dimanche 30 septembre 2007 ? 11:42 -0400, E Johnson a ?crit : > We are trying to install a newer Ekiga in order to get rid of bad > sound between PC running Debian Etch (me) and PC running Ubuntu Feisty > (him). We had Ekiga 2.0.03 working but the sound was unacceptable. > > Understood from reading help messages that we shoud at least use a > newer version, Ekiga 2.0.09. Before we installed that, Ekiga 2.0.11 > was made available, so we tried installing it, instead. > > But the Feisty system has a dependencies problem with PWLib when > installing 2.0.11 from the source packages. > What happened: > Opal installed okay. > PWLib installed okay after getting dependencies from Synaptic. > Ekiga 2.0.11 would not Configure.The error message was: > > > configure: error: Sorry but the PWLib version you are using doesn't > support LDAP > > Then I read messages here today, that recommend installing Opal, PWLib > and Ekiga from the Snapshots page. Okay that makes sense, thanks. > > But I see on the Ekiga - CVS Snapshots page, that there are no > snapshots for Ubuntu Feisty. > > Can someone running Feisty use another version of Ekiga and Opal and > PWLib that is on the Snapshots page? > > Will snapshots be made available for Feisty? > > Meanwhile, will one of the other versions on the Snapshots page work > in Feisty? > > Thanks > Liz J > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From iris.gates at gmail.com Sun Sep 30 17:06:17 2007 From: iris.gates at gmail.com (E Johnson) Date: Sun, 30 Sep 2007 13:06:17 -0400 Subject: [Ekiga-list] ekiga-list Digest, Vol 14, Issue 38 In-Reply-To: References: Message-ID: <70541d1e0709301006t79f25b8bi399254136baaa59b@mail.gmail.com> Following my own post. I see the snapshots for Feisty, so please disregard my last. Pardon my confusion; this is difficult for me. Will try to get Ekiga running now. Thanks, Liz J -------------- next part -------------- An HTML attachment was scrubbed... URL: From iris.gates at gmail.com Sun Sep 30 17:50:11 2007 From: iris.gates at gmail.com (E Johnson) Date: Sun, 30 Sep 2007 13:50:11 -0400 Subject: [Ekiga-list] Ekiga Snapshot --need gnome-autogen.sh script Message-ID: <70541d1e0709301050s56880f4et3fac22a65619d660@mail.gmail.com> Help installing Ekiga Snapshot from source. Running Debian Etch. I have installed Opal and PWLib Ekiga untarred okay. When I got to this command: ~/ekiga# ./autogen.sh --with-pwlib-dir=/usr/local --with-opal-dir=/usr/local --prefix=/usr --sysconfdir=/etc/ && make && make install This error message appeared: You need to install the gnome-common module and make sure the gnome-autogen.sh script is in your $PATH. What do I do now? Thanks very much, Liz J -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sun Sep 30 18:28:05 2007 From: sevmek at free.fr (yannick) Date: Sun, 30 Sep 2007 20:28:05 +0200 Subject: [Ekiga-list] Ekiga Snapshot --need gnome-autogen.sh script In-Reply-To: <70541d1e0709301050s56880f4et3fac22a65619d660@mail.gmail.com> References: <70541d1e0709301050s56880f4et3fac22a65619d660@mail.gmail.com> Message-ID: <1191176885.6744.70.camel@achille> You can install with daily updated packages: deb http://snapshots.ekiga.net/debian/ etch main Further infos here: http://snapshots.voxgratia.org/ Regards, Yannick Le dimanche 30 septembre 2007 ? 13:50 -0400, E Johnson a ?crit : > Help installing Ekiga Snapshot from source. > > Running Debian Etch. > > I have installed Opal and PWLib > > Ekiga untarred okay. > > When I got to this command: > ~/ekiga# ./autogen.sh --with-pwlib-dir=/usr/local > --with-opal-dir=/usr/local --prefix=/usr --sysconfdir=/etc/ && make && > make install > > This error message appeared: > You need to install the gnome-common module and make > sure the gnome-autogen.sh script is in your $PATH. > > What do I do now? > > Thanks very much, > Liz J > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From razametal at gmail.com Sun Sep 30 23:15:05 2007 From: razametal at gmail.com (RazaMetaL | Only The Good Die Young) Date: Sun, 30 Sep 2007 18:15:05 -0500 Subject: [Ekiga-list] Fullscreen Message-ID: Hi, What model of webcams are supporting the fullscreen view? I've one logitech quickcam pro 4000 that can not use the fullscreen view. I'm using the pwc module for this webcam. Regards, -- Linux User: 255902 Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html From ctubbsii at emich.edu Sun Sep 30 23:22:48 2007 From: ctubbsii at emich.edu (Christopher L Tubbs II) Date: Sun, 30 Sep 2007 19:22:48 -0400 Subject: [Ekiga-list] Fullscreen In-Reply-To: References: Message-ID: <47002FC8.8000302@emich.edu> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 My webcam works in full screen mode: Logitech QuickCam Communicate STX (using gspca driver, although it should be noted that until the gspca driver is patched, or until Ekiga supports more resolutions, this camera will crop the image instead of scale it). However, a separate issue I've noticed with fullscreen is that Ekiga scales the video to match the dimensions of the screen. This is problematic for widescreen displays because it stretches the picture, distorting the image. My suggestion is that the scaling should happen to the largest possible image size that maintains the same image ratio, and should fill in the leftover with black space (this is how most video programs nowadays handle widescreen displays). Chris RazaMetaL | Only The Good Die Young wrote: > Hi, > > What model of webcams are supporting the fullscreen view? > > I've one logitech quickcam pro 4000 that can not use the fullscreen > view. I'm using the pwc module for this webcam. > > Regards, > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iD8DBQFHAC/IyQYCx13q+8oRAkIVAKCuXp27oo7/U+26oR5D5UkWcLEUOgCfZZHD HL520BH6yHVX1lXKuV/zGSs= =JvNW -----END PGP SIGNATURE-----