[Ekiga-list] Timeout? Call out OK call in from Diamon unseen or broken

[Philippe Laliberte]

ael wrote:
> P laliberte wrote:
>   
>> ael wrote:
>>     
>>> Philippe Laliberte wrote:
>>>  
>>>       
>>>> Hello,
>>>>
>>>> I am running into a little problem. I did dig into the wiki but to no
>>>> avail.
>>>>
>>>> Set-up:
>>>>
>>>> Fedora 7.
>>>> kernel-2.6.22.9
>>>> Firewall disabled. selinux disabled
>>>> Ekiga 2.0.11
>>>>
>>>> Router Modem ADSL SpeedTouch 780
>>>> Firewall disabled (once I get Ekiga working I'll test what I can close)
>>>> VoIp turned off
>>>>
>>>> Modem routing Configuration
>>>>
>>>> Protocol    Port Range    Translate To ...    Trigger Protocol  
>>>> Trigger Port   Any            5000 - 5100    5000 - 5100      
>>>> -                               -
>>>> UDP           3479 - 3479    3479 - 3479   
>>>> UDP                         3479
>>>> UDP           3478 - 3479    3478 - 3479   
>>>> UDP                         3478
>>>>     
>>>>         
>>> I can't quite decode the above. If you trigger on 3478 (UDP) and then
>>> open 5000 -5100 (UDP) then it should be ok. I am not sure that is what
>>> you have above is it? I can't make out the first line ending in
>>> 5000-5100: how does that relate to the two following lines?
>>>
>>> ael
>>> _______________________________________________
>>> ekiga-list mailing list
>>> ekiga-list at gnome.org
>>> http://mail.gnome.org/mailman/listinfo/ekiga-list
>>>   
>>>       
>> Just missing a cariage return
>>
>> Protocol    Port Range    Translate To ...    Trigger Protocol  Trigger
>> Port   Any            5000 - 5100    5000 - 5100    -    -
>> UDP           3479 - 3479    3479 - 3479    UDP   3479
>> UDP           3478 - 3479    3478 - 3479    UDP   3478
>>
>>
>> What you mean is that I should just do :
>>
>> UDP         5000 - 5100    3479 - 3479    UDP   3479
>> UDP         5100 - 5100    3478 - 3479    UDP   3478
>>     
>
> Looking at that again, why are you translating 3479 into 5000-5100? Or
> am I misunderstanding the web interface (I assume)?
>
> Once you see a packet on 3478, then open 5000-5100. Do not translate
> 3478 into 5000... if that is what the above means. 3478 and 3479 should
> be (con) tracked properly by the router. It is just that it will block
> 5000-5100 unless it is told otherwise.
>
> I have not encountered a SpeedTouch router so I may be misunderstanding
> its configuration.
>
> ael
>   
The error is mine, late doing too many thing at the same time. You did 
understand it correctly the first time.

UDP         5000 - 5100    5000 - 5100    UDP   3479
UDP         5100 - 5100    5000 - 5100    UDP   3478

I'll test it later this afternoon thanks.

Cheers,

Philippe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mail.gnome.org/archives/ekiga-list/attachments/20071022/90e30c80/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: arsphl.vcf
Type: text/x-vcard
Size: 207 bytes
Desc: not available
URL: <https://mail.gnome.org/archives/ekiga-list/attachments/20071022/90e30c80/attachment-0001.vcf>