From ralf.baales at netcologne.de Sun Jul 1 11:37:53 2007 From: ralf.baales at netcologne.de (Ralf Baales) Date: Sun, 01 Jul 2007 13:37:53 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <1182719670.29505.2.camel@scorpion> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> <467EDC63.6020203@netcologne.de> <1182719670.29505.2.camel@scorpion> Message-ID: <46879211.8080408@netcologne.de> Damien Sandras schrieb: > Le dimanche 24 juin 2007 ? 23:04 +0200, Ralf Baales a ??crit : > >>>> >>>> >>> What did the firewall test give, in the druid? >>> >>> >> NAT Test result: open NAT >> >> > > You do not seem to be using STUN though. > That is what i do, but it doesn't work. Same message: Registration failed,because of timeout From dsandras at seconix.com Sun Jul 1 12:06:50 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 01 Jul 2007 14:06:50 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <46879211.8080408@netcologne.de> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> <467EDC63.6020203@netcologne.de> <1182719670.29505.2.camel@scorpion> <46879211.8080408@netcologne.de> Message-ID: <1183291610.3690.21.camel@scorpion> Le dimanche 01 juillet 2007 ? 13:37 +0200, Ralf Baales a ?crit : > Damien Sandras schrieb: > > Le dimanche 24 juin 2007 ? 23:04 +0200, Ralf Baales a ??crit : > > > >>>> > >>>> > >>> What did the firewall test give, in the druid? > >>> > >>> > >> NAT Test result: open NAT > >> > >> > > > > You do not seem to be using STUN though. > > > That is what i do, but it doesn't work. Same message: Registration > failed,because of timeout It means the server is not reachable or the answers do not reach you... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From j_suni at yahoo.co.uk Sun Jul 1 12:25:03 2007 From: j_suni at yahoo.co.uk (Jarno Suni) Date: Sun, 1 Jul 2007 05:25:03 -0700 (PDT) Subject: [Ekiga-list] Installing from http://www.ekiga.org repository in Xubuntu failed Message-ID: <865440.94362.qm@web25507.mail.ukl.yahoo.com> I tried to install Ekiga over the version that was installed from the ubuntu repository following instructions in http://wiki.ekiga.org/index.php/Linux_Users. I am using Dapper. Got these messages during the installation in Synaptic and the installation fails: Some of the packages could not be retrieved from the server(s). Do you want to continue, ignoring these packages? The following problems were found on your system: W: Failed to fetch http://www.ekiga.org/admin/downloads/latest/ubuntu/dapper_x86/./ekiga_2.0.9-0.dapper0_i386.deb Connection timed out W: Failed to fetch http://www.ekiga.org/admin/downloads/latest/ubuntu/dapper_x86/./libpt-1.10.0_1.10.7-0.dapper0_i386.deb Connection timed out I had similar problem with Xubuntu Feisty. -- Homepage: http://iki.fi/jarno.suni/ ____________________________________________________________________________________ Pinpoint customers who are looking for what you sell. http://searchmarketing.yahoo.com/ From dsandras at seconix.com Sun Jul 1 12:39:52 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 01 Jul 2007 14:39:52 +0200 Subject: [Ekiga-list] Installing from http://www.ekiga.org repository in Xubuntu failed In-Reply-To: <865440.94362.qm@web25507.mail.ukl.yahoo.com> References: <865440.94362.qm@web25507.mail.ukl.yahoo.com> Message-ID: <1183293592.3690.25.camel@scorpion> Le dimanche 01 juillet 2007 ? 05:25 -0700, Jarno Suni a ?crit : > I tried to install Ekiga over the version that was > installed from the ubuntu repository following > instructions in > http://wiki.ekiga.org/index.php/Linux_Users. I am > using Dapper. Got these messages during the > installation in Synaptic and the installation fails: > > Some of the packages could not be retrieved from the > server(s). > Do you want to continue, ignoring these packages? > > > The following problems were found on your system: > > W: Failed to fetch > http://www.ekiga.org/admin/downloads/latest/ubuntu/dapper_x86/./ekiga_2.0.9-0.dapper0_i386.deb > Connection timed out > > > W: Failed to fetch > http://www.ekiga.org/admin/downloads/latest/ubuntu/dapper_x86/./libpt-1.10.0_1.10.7-0.dapper0_i386.deb > Connection timed out It means it failed to fetch the package because you have a connection which times out to www.ekiga.org. However, www.ekiga.org works perfectly from here... Please check your network settings. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ralf.baales at netcologne.de Sun Jul 1 13:32:50 2007 From: ralf.baales at netcologne.de (Ralf Baales) Date: Sun, 01 Jul 2007 15:32:50 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <1183291610.3690.21.camel@scorpion> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> <467EDC63.6020203@netcologne.de> <1182719670.29505.2.camel@scorpion> <46879211.8080408@netcologne.de> <1183291610.3690.21.camel@scorpion> Message-ID: <4687AD02.3000107@netcologne.de> Damien Sandras schrieb: > Le dimanche 01 juillet 2007 ? 13:37 +0200, Ralf Baales a ??crit : > >> Damien Sandras schrieb: >> >>> Le dimanche 24 juin 2007 ?? 23:04 +0200, Ralf Baales a ????crit : >>> >>> >>>>>> >>>>>> >>>>>> >>>>> What did the firewall test give, in the druid? >>>>> >>>>> >>>>> >>>> NAT Test result: open NAT >>>> >>>> >>>> >>> You do not seem to be using STUN though. >>> >>> >> That is what i do, but it doesn't work. Same message: Registration >> failed,because of timeout >> > > It means the server is not reachable or the answers do not reach you... > > > Mmh, ok, but what should i do? I'm running with open suse Linux 10.2 an KDE. I'm opening the udp ports 5xxx that ekiga needs. Is their anything else i can do? ralf From law_ence.dev at ntlworld.com Sun Jul 1 14:36:49 2007 From: law_ence.dev at ntlworld.com (ael) Date: Sun, 01 Jul 2007 15:36:49 +0100 Subject: [Ekiga-list] Registration failed In-Reply-To: <4687AD02.3000107@netcologne.de> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> <467EDC63.6020203@netcologne.de> <1182719670.29505.2.camel@scorpion> <46879211.8080408@netcologne.de> <1183291610.3690.21.camel@scorpion> <4687AD02.3000107@netcologne.de> Message-ID: <4687BC01.1060802@ntlworld.com> Ralf Baales wrote: > Damien Sandras schrieb: >> Le dimanche 01 juillet 2007 ? 13:37 +0200, Ralf Baales a ??crit : >> >>> Damien Sandras schrieb: >>> >>>> Le dimanche 24 juin 2007 ?? 23:04 +0200, Ralf Baales a ????crit : >>>> >>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> What did the firewall test give, in the druid? >>>>>> >>>>>> >>>>>> >>>>> NAT Test result: open NAT >>>>> >>>>> >>>>> >>>> You do not seem to be using STUN though. >>>> >>>> >>> That is what i do, but it doesn't work. Same message: Registration >>> failed,because of timeout >>> >> It means the server is not reachable or the answers do not reach you... >> >> >> > Mmh, ok, but what should i do? I'm running with open suse Linux 10.2 an > KDE. I'm opening the udp ports 5xxx that ekiga needs. Is their anything > else i can do? ? Open the STUN ports as well? (3478-3479) ael From j_suni at yahoo.co.uk Sun Jul 1 15:31:28 2007 From: j_suni at yahoo.co.uk (Jarno Suni) Date: Sun, 1 Jul 2007 08:31:28 -0700 (PDT) Subject: [Ekiga-list] Installing from http://www.ekiga.org repository in Xubuntu failed In-Reply-To: <1183293592.3690.25.camel@scorpion> Message-ID: <324974.41810.qm@web25515.mail.ukl.yahoo.com> --- Damien Sandras wrote: > It means it failed to fetch the package because you > have a connection > which times out to www.ekiga.org. I tried "apply" a couple of more times in Synaptic, and it succeeded to download the remaining debs. > However, www.ekiga.org works perfectly from here... > Please check your > network settings. How? I have downloaded a lot of packages and this is very unusual that it can not download right away. But sometimes, when surfing web, I have to click reload in Firefox to make a page start loading (without disturbing delay). -- Homepage: http://iki.fi/jarno.suni/ ____________________________________________________________________________________ Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 From dsandras at seconix.com Sun Jul 1 16:49:00 2007 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 01 Jul 2007 18:49:00 +0200 Subject: [Ekiga-list] Installing from http://www.ekiga.org repository in Xubuntu failed In-Reply-To: <324974.41810.qm@web25515.mail.ukl.yahoo.com> References: <324974.41810.qm@web25515.mail.ukl.yahoo.com> Message-ID: <1183308540.3690.31.camel@scorpion> Le dimanche 01 juillet 2007 ? 08:31 -0700, Jarno Suni a ?crit : > > However, www.ekiga.org works perfectly from here... > > Please check your > > network settings. > > How? I have downloaded a lot of packages and this is > very unusual that it can not download right away. But > sometimes, when surfing web, I have to click reload in > Firefox to make a page start loading (without > disturbing delay). Perhaps there was a router problem between you and ekiga.org... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon Jul 2 22:41:13 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 03 Jul 2007 00:41:13 +0200 Subject: [Ekiga-list] Happy Birthday Ekiga ! Message-ID: <1183416073.3620.0.camel@scorpion> 6 years........ already ! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From yanick.durand at orange.fr Mon Jul 2 22:55:28 2007 From: yanick.durand at orange.fr (Yanick DURAND) Date: Tue, 3 Jul 2007 00:55:28 +0200 Subject: [Ekiga-list] Happy Birthday Ekiga ! References: <1183416073.3620.0.camel@scorpion> Message-ID: <000701c7bcfc$15c80900$0a01a8c0@nom0ojxqhmbkuv> Hi Happy birthday and great thanks for your work Regards YD ----- Original Message ----- From: "Damien Sandras" To: Cc: Sent: Tuesday, July 03, 2007 12:41 AM Subject: [Ekiga-list] Happy Birthday Ekiga ! >6 years........ already ! > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From yochanon at localnet.com Mon Jul 2 23:05:10 2007 From: yochanon at localnet.com (John B) Date: Mon, 2 Jul 2007 18:05:10 -0500 Subject: [Ekiga-list] Happy Birthday Ekiga ! In-Reply-To: <1183416073.3620.0.camel@scorpion> References: <1183416073.3620.0.camel@scorpion> Message-ID: <200707021805.10208.yochanon@localnet.com> On Mon 02 July 07 17:41, Damien Sandras wrote: > 6 years........ already ! Time flies when you're having fun! Happy birthday Ekiga! From dam at venturin.net Tue Jul 3 08:04:50 2007 From: dam at venturin.net (dam) Date: Tue, 03 Jul 2007 10:04:50 +0200 Subject: [Ekiga-list] ekiga + ldap + evolution address book Message-ID: <468A0322.4080007@venturin.net> Hi all I have a working ldap based addressbook for evolution I'm trying to setup Ekiga addressbook to retrive informations from ldap but it's not working. I used the same parameters used in evolution's configuration. It means: Base DN: cn=admin,dc=spippolo,dc=2v,dc=ntw Search scope: subtree Search Attribute: ou=contatti,dc=spippolo,dc=2v,dc=ntw After pressing OK I wait for the password prompt, but nothing happen. Searching a contact gives no results. I searched in the documentation for tips but with no results. May u help me please? Thanks a lot in advance Dam From aaractingi at gmail.com Tue Jul 3 07:59:57 2007 From: aaractingi at gmail.com (Alexandre Aractingi) Date: Tue, 03 Jul 2007 09:59:57 +0200 Subject: [Ekiga-list] [Ekiga-devel-list] Happy Birthday Ekiga ! In-Reply-To: <1183416073.3620.0.camel@scorpion> References: <1183416073.3620.0.camel@scorpion> Message-ID: <468A01FD.1020501@gmail.com> Happy birthday! And congratulations to Damien and the team for the great work! Damien Sandras a ?crit : > 6 years........ already ! > From fonz at siol.net Tue Jul 3 09:07:23 2007 From: fonz at siol.net (Jure Petrovic) Date: Tue, 03 Jul 2007 11:07:23 +0200 Subject: [Ekiga-list] Happy Birthday Ekiga ! In-Reply-To: <1183416073.3620.0.camel@scorpion> References: <1183416073.3620.0.camel@scorpion> Message-ID: <1183453643.2276.3.camel@desktop.local.si> Happy Birthday! On Tue, 2007-07-03 at 00:41 +0200, Damien Sandras wrote: > 6 years........ already ! ...and I wish Ekiga a llooooot moooore!! Regards, Jure From jpuydt at free.fr Tue Jul 3 09:42:38 2007 From: jpuydt at free.fr (Julien Puydt) Date: Tue, 03 Jul 2007 11:42:38 +0200 Subject: [Ekiga-list] ekiga + ldap + evolution address book In-Reply-To: <468A0322.4080007@venturin.net> References: <468A0322.4080007@venturin.net> Message-ID: <468A1A0E.6070200@free.fr> dam wrote: > I have a working ldap based addressbook for evolution > > I'm trying to setup Ekiga addressbook to retrive informations from ldap > but it's not working. > > I used the same parameters used in evolution's configuration. It means: > Base DN: cn=admin,dc=spippolo,dc=2v,dc=ntw > Search scope: subtree > Search Attribute: ou=contatti,dc=spippolo,dc=2v,dc=ntw > > After pressing OK I wait for the password prompt, but nothing happen. > Searching a contact gives no results. > > I searched in the documentation for tips but with no results. > May u help me please? If I remember well, we only do simple authentification in the LDAP backend (which means no password). Doesn't evolution make the LDAP addressbook available through the evolution-data-server api? Snark on #ekiga From dsandras at seconix.com Tue Jul 3 10:59:14 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 03 Jul 2007 12:59:14 +0200 Subject: [Ekiga-list] [Ekiga-devel-list] Happy Birthday Ekiga ! In-Reply-To: <468A01FD.1020501@gmail.com> References: <1183416073.3620.0.camel@scorpion> <468A01FD.1020501@gmail.com> Message-ID: <1183460354.3759.11.camel@scorpion> Le mardi 03 juillet 2007 ? 09:59 +0200, Alexandre Aractingi a ?crit : > Happy birthday! > And congratulations to Damien and the team for the great work! > Thanks to all for the best wishes :) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From javi.cheliii at gmail.com Tue Jul 3 12:51:06 2007 From: javi.cheliii at gmail.com (Javi Jimenez) Date: Tue, 3 Jul 2007 14:51:06 +0200 Subject: [Ekiga-list] INFORMATION Message-ID: <43b94aea0707030551g3ec9d57bt57372fa70376cd58@mail.gmail.com> Hi, I have created a sip account at ekiga.net I need to know these things: SERVER="sip.dns-hosting.info" DOMAIN="sip2sip.info" I need to know the server and domain for my account in order to configure an application. Thanks in advance. Javier. -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Jul 3 12:59:14 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 03 Jul 2007 14:59:14 +0200 Subject: [Ekiga-list] INFORMATION In-Reply-To: <43b94aea0707030551g3ec9d57bt57372fa70376cd58@mail.gmail.com> References: <43b94aea0707030551g3ec9d57bt57372fa70376cd58@mail.gmail.com> Message-ID: <1183467554.3759.13.camel@scorpion> Le mardi 03 juillet 2007 ? 14:51 +0200, Javi Jimenez a ?crit : > Hi, > > I have created a sip account at ekiga.net > I need to know these things: > SERVER="sip.dns-hosting.info" > DOMAIN="sip2sip.info" > > I need to know the server and domain for my account in order to > configure an application. ekiga.net -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From javi.cheliii at gmail.com Tue Jul 3 18:05:31 2007 From: javi.cheliii at gmail.com (Javi Jimenez) Date: Tue, 3 Jul 2007 20:05:31 +0200 Subject: [Ekiga-list] INFORMATION In-Reply-To: <1183467554.3759.13.camel@scorpion> References: <43b94aea0707030551g3ec9d57bt57372fa70376cd58@mail.gmail.com> <1183467554.3759.13.camel@scorpion> Message-ID: <43b94aea0707031105u7e2d3ac4ie90d58951e2e4ab1@mail.gmail.com> Hello again, I would like to comment why I need this names. I have a Nintendo DS console and there is a guy who is making a homebrew program for the console in order to use it as a phone. So, he has released a compatibility test application to check free SIP accounts, and I would like to know these parameteres which are required in such application: SERVER="sip.dns-hosting.info" USER="2233445566" PASSWORD="12345" DOMAIN="sip2sip.info" If you want to have a look to the project: http://www.scenenews.info/dsip/ Thanks, and I hope you can provide me with that information. Perhaps ekiga is not supported.... who knows... Thanks again. Cheers from Spain. 2007/7/3, Damien Sandras : > > Le mardi 03 juillet 2007 ? 14:51 +0200, Javi Jimenez a ?crit : > > Hi, > > > > I have created a sip account at ekiga.net > > I need to know these things: > > SERVER="sip.dns-hosting.info" > > DOMAIN="sip2sip.info" > > > > I need to know the server and domain for my account in order to > > configure an application. > > > ekiga.net > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Jul 3 18:51:37 2007 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 03 Jul 2007 20:51:37 +0200 Subject: [Ekiga-list] INFORMATION In-Reply-To: <43b94aea0707031105u7e2d3ac4ie90d58951e2e4ab1@mail.gmail.com> References: <43b94aea0707030551g3ec9d57bt57372fa70376cd58@mail.gmail.com> <1183467554.3759.13.camel@scorpion> <43b94aea0707031105u7e2d3ac4ie90d58951e2e4ab1@mail.gmail.com> Message-ID: <1183488697.3903.4.camel@scorpion> Le mardi 03 juillet 2007 ? 20:05 +0200, Javi Jimenez a ?crit : > Hello again, > > I would like to comment why I need this names. > > I have a Nintendo DS console and there is a guy who is making a > homebrew program for the console in order to use it as a phone. > So, he has released a compatibility test application to check free SIP > accounts, and I would like to know these parameteres which are > required in such application: > > SERVER="sip.dns-hosting.info" > USER="2233445566" > PASSWORD="12345" > DOMAIN="sip2sip.info" > > If you want to have a look to the project: > http://www.scenenews.info/dsip/ > > Thanks, and I hope you can provide me with that information. > Perhaps ekiga is not supported.... who knows... > SERVER and DOMAIN should be set to ekiga.net (see my previous mail). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From lists at dcorking.com Tue Jul 3 18:51:49 2007 From: lists at dcorking.com (David Corking) Date: Tue, 3 Jul 2007 19:51:49 +0100 Subject: [Ekiga-list] INFORMATION In-Reply-To: <43b94aea0707031105u7e2d3ac4ie90d58951e2e4ab1@mail.gmail.com> References: <43b94aea0707030551g3ec9d57bt57372fa70376cd58@mail.gmail.com> <1183467554.3759.13.camel@scorpion> <43b94aea0707031105u7e2d3ac4ie90d58951e2e4ab1@mail.gmail.com> Message-ID: On 7/3/07, Javi Jimenez wrote: > I have a Nintendo DS console and there is a guy who is making a homebrew > program for the console in order to use it as a phone. > So, he has released a compatibility test application to check free SIP > accounts, and I would like to know these parameteres which are required in > such application: > > SERVER="sip.dns-hosting.info" > USER="2233445566" > PASSWORD="12345" > DOMAIN="sip2sip.info" > Thanks, and I hope you can provide me with that information. > Perhaps ekiga is not supported.... who knows... > 2007/7/3, Damien Sandras : > > ekiga.net Perhaps you did not realise that Damien already sent you the answer? Did you test it yet? David From javi.cheliii at gmail.com Tue Jul 3 19:02:30 2007 From: javi.cheliii at gmail.com (Javi Jimenez) Date: Tue, 3 Jul 2007 21:02:30 +0200 Subject: [Ekiga-list] INFORMATION In-Reply-To: References: <43b94aea0707030551g3ec9d57bt57372fa70376cd58@mail.gmail.com> <1183467554.3759.13.camel@scorpion> <43b94aea0707031105u7e2d3ac4ie90d58951e2e4ab1@mail.gmail.com> Message-ID: <43b94aea0707031202x26cfa900l21d102df289828e5@mail.gmail.com> Thanks, I didn't realize :P 2007/7/3, David Corking : > > On 7/3/07, Javi Jimenez wrote: > > I have a Nintendo DS console and there is a guy who is making a homebrew > > program for the console in order to use it as a phone. > > So, he has released a compatibility test application to check free SIP > > accounts, and I would like to know these parameteres which are required > in > > such application: > > > > SERVER="sip.dns-hosting.info" > > USER="2233445566" > > PASSWORD="12345" > > DOMAIN="sip2sip.info" > > > Thanks, and I hope you can provide me with that information. > > Perhaps ekiga is not supported.... who knows... > > > 2007/7/3, Damien Sandras : > > > > ekiga.net > > Perhaps you did not realise that Damien already sent you the answer? > > Did you test it yet? > > David > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From ralf.baales at netcologne.de Tue Jul 3 20:21:12 2007 From: ralf.baales at netcologne.de (Ralf Baales) Date: Tue, 03 Jul 2007 22:21:12 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <4687BC01.1060802@ntlworld.com> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> <467EDC63.6020203@netcologne.de> <1182719670.29505.2.camel@scorpion> <46879211.8080408@netcologne.de> <1183291610.3690.21.camel@scorpion> <4687AD02.3000107@netcologne.de> <4687BC01.1060802@ntlworld.com> Message-ID: <468AAFB8.2030006@netcologne.de> ael schrieb: > Ralf Baales wrote: > >> Damien Sandras schrieb: >> >>> Le dimanche 01 juillet 2007 ?? 13:37 +0200, Ralf Baales a ????crit : >>> >>> >>>> Damien Sandras schrieb: >>>> >>>> >>>>> Le dimanche 24 juin 2007 ????? 23:04 +0200, Ralf Baales a ?????????crit : >>>>> >>>>> >>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> What did the firewall test give, in the druid? >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> NAT Test result: open NAT >>>>>> >>>>>> >>>>>> >>>>>> >>>>> You do not seem to be using STUN though. >>>>> >>>>> >>>>> >>>> That is what i do, but it doesn't work. Same message: Registration >>>> failed,because of timeout >>>> >>>> >>> It means the server is not reachable or the answers do not reach you... >>> >>> >>> >>> >> Mmh, ok, but what should i do? I'm running with open suse Linux 10.2 an >> KDE. I'm opening the udp ports 5xxx that ekiga needs. Is their anything >> else i can do? >> > > ? Open the STUN ports as well? (3478-3479) > > ael > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list Thanks for the answer. Are these Ports TCP or UDP Ports? -Ralf- From sevmek at free.fr Wed Jul 4 04:20:38 2007 From: sevmek at free.fr (yannick) Date: Wed, 04 Jul 2007 06:20:38 +0200 Subject: [Ekiga-list] Registration failed In-Reply-To: <468AAFB8.2030006@netcologne.de> References: <467E91B5.5070200@netcologne.de> <467E945D.4070207@free.fr> <467EDC63.6020203@netcologne.de> <1182719670.29505.2.camel@scorpion> <46879211.8080408@netcologne.de> <1183291610.3690.21.camel@scorpion> <4687AD02.3000107@netcologne.de> <4687BC01.1060802@ntlworld.com> <468AAFB8.2030006@netcologne.de> Message-ID: <1183522838.23259.62.camel@achille> Le mardi 03 juillet 2007 ? 22:21 +0200, Ralf Baales a ?crit : > > ? Open the STUN ports as well? (3478-3479) > > > > ael > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > Thanks for the answer. Are these Ports TCP or UDP Ports? http://wiki.ekiga.org/index.php/Internet_ports_used_by_Ekiga Regards, Yannick > -Ralf- -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From wlaoye at yahoo.com Wed Jul 4 05:38:02 2007 From: wlaoye at yahoo.com (w laoye) Date: Tue, 3 Jul 2007 22:38:02 -0700 (PDT) Subject: [Ekiga-list] Fwd: ekiga Message-ID: <816531.16834.qm@web62104.mail.re1.yahoo.com> --- w laoye wrote: > Date: Tue, 3 Jul 2007 02:54:54 -0700 (PDT) > From: w laoye > Subject: ekiga > To: Ekiga mailing list > > Is video communication under ekiga encrypted? > > I have ekiga installed for about a month now but > still > hav no chance to test out the video link. How about > setting up a site for video test, like what is > available for audio. > > When skype video becomes available, will ekiga peter > out? > > wl > > > > > ____________________________________________________________________________________ > Pinpoint customers who are looking for what you > sell. > http://searchmarketing.yahoo.com/ > ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow From sevmek at free.fr Wed Jul 4 06:06:51 2007 From: sevmek at free.fr (yannick) Date: Wed, 04 Jul 2007 08:06:51 +0200 Subject: [Ekiga-list] Fwd: ekiga In-Reply-To: <816531.16834.qm@web62104.mail.re1.yahoo.com> References: <816531.16834.qm@web62104.mail.re1.yahoo.com> Message-ID: <1183529211.23259.82.camel@achille> Hi, Le mardi 03 juillet 2007 ? 22:38 -0700, w laoye a ?crit : > --- w laoye wrote: > > > Date: Tue, 3 Jul 2007 02:54:54 -0700 (PDT) > > From: w laoye > > Subject: ekiga > > To: Ekiga mailing list > > > > Is video communication under ekiga encrypted? No, but it's planned for version 3.2. > > > > I have ekiga installed for about a month now but > > still > > hav no chance to test out the video link. How about > > setting up a site for video test, like what is > > available for audio. sip:500 at ekiga.net is an echo test supporting video. > > > > When skype video becomes available, will ekiga peter > > out? At the time skype video for Linux will become available, I bet Ekiga will have release support for h.264 video codec giving Ekiga same quality as ichat for mac, with high framerate (up to 25 FPS i bet), thus Ekiga will have better video than Skype, as H.264 is reputed to have better quality than VP7 used by Skype. See: http://www.doom9.org/index.html?/codecs-main-105-1.htm Skype has very high security concerns, e.g. in my country (France) Skype is forbidden in education administration. Security by obfuscation and proprietary protocol isn't good enough for independence and real security (checked by others). Skype leeches your bandwidth to allow NAT transversal (and maybe other purposes, who knows except Skype ?). You can't know what Skype is doing, everything is encrypted, and Skype generate traffic even if idle... Skype messed up the way internet works by trying to pass any restriction an administrator want to put on his network (using the port 80 and encryption, relaying traffic in a P2P fashion, etc.) Skype is enforcing Intel against AMD: http://news.com.com/AMDs+lawyers+call+on+Skype/2100-1006_3-6044365.html This means Skype use you to make money and restrict your hardware choice... Skype refuses interoperability. Thus their rates are usually more expensive than the SIP rates. e.g. http://www.skype.com/products/skypeout/rates/ http://www.voipbuster.com/en/rates.html (be aware you can choose any SIP provider and benefit from competition, which you can't do with skype) Some people (like me) refuse to use a closed protocol to transport their communications. This isn't trustful. IMHO, SKYPE SUCKS. Regards, Yannick > > > > wl > > > > > > > > > > > ____________________________________________________________________________________ > > Pinpoint customers who are looking for what you > > sell. > > http://searchmarketing.yahoo.com/ > > > > > > > ____________________________________________________________________________________ > Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games. > http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dam at venturin.net Wed Jul 4 07:20:56 2007 From: dam at venturin.net (dam) Date: Wed, 04 Jul 2007 09:20:56 +0200 Subject: [Ekiga-list] ekiga + ldap + evolution address book In-Reply-To: <468A1A0E.6070200@free.fr> References: <468A0322.4080007@venturin.net> <468A1A0E.6070200@free.fr> Message-ID: <468B4A58.6060701@venturin.net> Julien Puydt wrote: > dam wrote: > >> I have a working ldap based addressbook for evolution >> >> I'm trying to setup Ekiga addressbook to retrive informations from ldap >> but it's not working. >> >> I used the same parameters used in evolution's configuration. It means: >> Base DN: cn=admin,dc=spippolo,dc=2v,dc=ntw >> Search scope: subtree >> Search Attribute: ou=contatti,dc=spippolo,dc=2v,dc=ntw >> >> After pressing OK I wait for the password prompt, but nothing happen. >> Searching a contact gives no results. >> >> I searched in the documentation for tips but with no results. >> May u help me please? >> > > If I remember well, we only do simple authentification in the LDAP > backend (which means no password). > > Doesn't evolution make the LDAP addressbook available through the > evolution-data-server api? > I think so, but I'm not skilled enough to know this and how to use this. Do u have any idea? If u mean that I should see the remote ldap addressbook listed in ekiga's addressbook in the same way of my local contacts ... well for now it doesn't happen. May be it's necessary to setup something ... but I really don't know how thanks for your reply ciao! > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > From ben-ekiga at bjencks.net Wed Jul 4 21:05:38 2007 From: ben-ekiga at bjencks.net (Ben Jencks) Date: Wed, 04 Jul 2007 14:05:38 -0700 Subject: [Ekiga-list] Creative Optia problems Message-ID: First, my setup: * Ubuntu Feisty, with included kernel and uvcvideo module * Creative Labs Live! Cam Optia * Ekiga 2.0.9, OPAL 2.2.8, PWLib 1.10.7, all built from source from Ekiga website. I had to hack the PWLib configure script in order to enable V4L2 [1], this may be related to the problems. The problems: When I start Ekiga, it immediately uses massive amounts of memory (1G virtual, 750M resident according to top), causing a delay while everything else is swapped out. The video display shows the initial view of the webcam. The very top portion of the image shows motion, but most of the image is static. The camera works with kdetv (V4L2 driver) and luvcview, though I haven't managed to get xawtv working. Has anyone managed to get this camera working with ekiga? [1] Without this patch, config.log reported configure:4313: checking for linux/videodev2.h configure:4344: gcc -c -g -O2 conftest.c >&5 In file included from conftest.c:21: /usr/include/linux/time.h:10: error: expected specifier-qualifier-list before 'time_t' /usr/include/linux/time.h:16: error: expected specifier-qualifier-list before 'time_t' --- plugins/configure.orig 2007-07-04 13:58:18.000000000 -0700 +++ plugins/configure 2007-07-04 00:38:59.000000000 -0700 @@ -4321,10 +4321,10 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ - +$ac_includes_default #ifdef __linux__ -#include -#include +// #include +// #include #else #ifdef __sun #include -Ben Jencks From sevmek at free.fr Wed Jul 4 21:41:07 2007 From: sevmek at free.fr (yannick) Date: Wed, 04 Jul 2007 23:41:07 +0200 Subject: [Ekiga-list] Creative Optia problems In-Reply-To: References: Message-ID: <1183585268.23259.87.camel@achille> Hi, Maybe it will be better with those packages : http://wiki.ekiga.org/index.php/Linux_Users#Feisty_i386 Regards, Yannick Le mercredi 04 juillet 2007 ? 14:05 -0700, Ben Jencks a ?crit : > First, my setup: > > * Ubuntu Feisty, with included kernel and uvcvideo module > * Creative Labs Live! Cam Optia > * Ekiga 2.0.9, OPAL 2.2.8, PWLib 1.10.7, all built from source from > Ekiga website. I had to hack the PWLib configure script in order to > enable V4L2 [1], this may be related to the problems. > > The problems: > When I start Ekiga, it immediately uses massive amounts of memory (1G > virtual, 750M resident according to top), causing a delay while > everything else is swapped out. > > The video display shows the initial view of the webcam. The very top > portion of the image shows motion, but most of the image is static. > > The camera works with kdetv (V4L2 driver) and luvcview, though I haven't > managed to get xawtv working. > > Has anyone managed to get this camera working with ekiga? > > [1] Without this patch, config.log reported > > configure:4313: checking for linux/videodev2.h > configure:4344: gcc -c -g -O2 conftest.c >&5 > In file included from conftest.c:21: > /usr/include/linux/time.h:10: error: expected specifier-qualifier-list before 'time_t' > /usr/include/linux/time.h:16: error: expected specifier-qualifier-list before 'time_t' > > --- plugins/configure.orig 2007-07-04 13:58:18.000000000 -0700 > +++ plugins/configure 2007-07-04 00:38:59.000000000 -0700 > @@ -4321,10 +4321,10 @@ > cat confdefs.h >>conftest.$ac_ext > cat >>conftest.$ac_ext <<_ACEOF > /* end confdefs.h. */ > - > +$ac_includes_default > #ifdef __linux__ > -#include > -#include > +// #include > +// #include > #else > #ifdef __sun > #include > > -Ben Jencks > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From ben-ekiga at bjencks.net Wed Jul 4 23:58:03 2007 From: ben-ekiga at bjencks.net (Ben Jencks) Date: Wed, 04 Jul 2007 16:58:03 -0700 Subject: [Ekiga-list] Creative Optia problems In-Reply-To: <1183585268.23259.87.camel@achille> (sevmek@free.fr's message of "Wed, 04 Jul 2007 23:41:07 +0200") References: <1183585268.23259.87.camel@achille> Message-ID: Thanks for your quick response, that fixed the memory usage problem. However, now I get no picture at all, just a grey space. General History says 16:49:36 Successfully opened video device Live! Cam Optia, channel 0 and the active light on the camera is on. Using the configuration druid's test device button, I get Failed to open the device Could not open the chosen channel with the chosen video format. I realize this isn't very much information, I'm happy to provide more if you tell me how to get it. -Ben yannick writes: > Hi, > > Maybe it will be better with those packages : > http://wiki.ekiga.org/index.php/Linux_Users#Feisty_i386 > > Regards, > Yannick > > Le mercredi 04 juillet 2007 ? 14:05 -0700, Ben Jencks a ?crit : >> First, my setup: >> >> * Ubuntu Feisty, with included kernel and uvcvideo module >> * Creative Labs Live! Cam Optia >> * Ekiga 2.0.9, OPAL 2.2.8, PWLib 1.10.7, all built from source from >> Ekiga website. I had to hack the PWLib configure script in order to >> enable V4L2 [1], this may be related to the problems. >> >> The problems: >> When I start Ekiga, it immediately uses massive amounts of memory (1G >> virtual, 750M resident according to top), causing a delay while >> everything else is swapped out. >> >> The video display shows the initial view of the webcam. The very top >> portion of the image shows motion, but most of the image is static. >> >> The camera works with kdetv (V4L2 driver) and luvcview, though I haven't >> managed to get xawtv working. >> >> Has anyone managed to get this camera working with ekiga? >> >> [1] Without this patch, config.log reported >> >> configure:4313: checking for linux/videodev2.h >> configure:4344: gcc -c -g -O2 conftest.c >&5 >> In file included from conftest.c:21: >> /usr/include/linux/time.h:10: error: expected specifier-qualifier-list before 'time_t' >> /usr/include/linux/time.h:16: error: expected specifier-qualifier-list before 'time_t' >> >> --- plugins/configure.orig 2007-07-04 13:58:18.000000000 -0700 >> +++ plugins/configure 2007-07-04 00:38:59.000000000 -0700 >> @@ -4321,10 +4321,10 @@ >> cat confdefs.h >>conftest.$ac_ext >> cat >>conftest.$ac_ext <<_ACEOF >> /* end confdefs.h. */ >> - >> +$ac_includes_default >> #ifdef __linux__ >> -#include >> -#include >> +// #include >> +// #include >> #else >> #ifdef __sun >> #include >> >> -Ben Jencks >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From sevmek at free.fr Thu Jul 5 16:44:35 2007 From: sevmek at free.fr (yannick) Date: Thu, 05 Jul 2007 18:44:35 +0200 Subject: [Ekiga-list] Creative Optia problems In-Reply-To: References: <1183585268.23259.87.camel@achille> Message-ID: <1183653875.23259.137.camel@achille> Hi, Fortunately, this has been fixed in CVS of pwlib : 2007-07-01 17:20 dsandras * src/: ptlib/common/tinyjpeg.cxx, ptclib/psockbun.cxx: Fixed potential problems with MJPEG-based cameras thanks Matthias Schneider . Thanks a lot! Be aware, at the moment opal is broken, compiling SVN version will get you in trouble... Better wait 2.0.10, or a better opal, or apply yourself... Regards, Yannick Le mercredi 04 juillet 2007 ? 16:58 -0700, Ben Jencks a ?crit : > Thanks for your quick response, that fixed the memory usage > problem. However, now I get no picture at all, just a grey > space. General History says > 16:49:36 Successfully opened video device Live! Cam Optia, channel 0 > and the active light on the camera is on. Using the configuration > druid's test device button, I get > Failed to open the device > > Could not open the chosen channel with the chosen video format. > > I realize this isn't very much information, I'm happy to provide more if > you tell me how to get it. > -Ben > > yannick writes: > > > Hi, > > > > Maybe it will be better with those packages : > > http://wiki.ekiga.org/index.php/Linux_Users#Feisty_i386 > > > > Regards, > > Yannick > > > > Le mercredi 04 juillet 2007 ? 14:05 -0700, Ben Jencks a ?crit : > >> First, my setup: > >> > >> * Ubuntu Feisty, with included kernel and uvcvideo module > >> * Creative Labs Live! Cam Optia > >> * Ekiga 2.0.9, OPAL 2.2.8, PWLib 1.10.7, all built from source from > >> Ekiga website. I had to hack the PWLib configure script in order to > >> enable V4L2 [1], this may be related to the problems. > >> > >> The problems: > >> When I start Ekiga, it immediately uses massive amounts of memory (1G > >> virtual, 750M resident according to top), causing a delay while > >> everything else is swapped out. > >> > >> The video display shows the initial view of the webcam. The very top > >> portion of the image shows motion, but most of the image is static. > >> > >> The camera works with kdetv (V4L2 driver) and luvcview, though I haven't > >> managed to get xawtv working. > >> > >> Has anyone managed to get this camera working with ekiga? > >> > >> [1] Without this patch, config.log reported > >> > >> configure:4313: checking for linux/videodev2.h > >> configure:4344: gcc -c -g -O2 conftest.c >&5 > >> In file included from conftest.c:21: > >> /usr/include/linux/time.h:10: error: expected specifier-qualifier-list before 'time_t' > >> /usr/include/linux/time.h:16: error: expected specifier-qualifier-list before 'time_t' > >> > >> --- plugins/configure.orig 2007-07-04 13:58:18.000000000 -0700 > >> +++ plugins/configure 2007-07-04 00:38:59.000000000 -0700 > >> @@ -4321,10 +4321,10 @@ > >> cat confdefs.h >>conftest.$ac_ext > >> cat >>conftest.$ac_ext <<_ACEOF > >> /* end confdefs.h. */ > >> - > >> +$ac_includes_default > >> #ifdef __linux__ > >> -#include > >> -#include > >> +// #include > >> +// #include > >> #else > >> #ifdef __sun > >> #include > >> > >> -Ben Jencks > >> _______________________________________________ > >> ekiga-list mailing list > >> ekiga-list at gnome.org > >> http://mail.gnome.org/mailman/listinfo/ekiga-list > >> > > -- > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > sip:yannick at ekiga.net > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Thu Jul 5 16:49:59 2007 From: sevmek at free.fr (yannick) Date: Thu, 05 Jul 2007 18:49:59 +0200 Subject: [Ekiga-list] Creative Optia problems In-Reply-To: <1183653875.23259.137.camel@achille> References: <1183585268.23259.87.camel@achille> <1183653875.23259.137.camel@achille> Message-ID: <1183654199.23259.138.camel@achille> Le jeudi 05 juillet 2007 ? 18:44 +0200, yannick a ?crit : > src/: ptlib/common/tinyjpeg.cxx ^^ This is the patch you need. -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From ben-ekiga at bjencks.net Thu Jul 5 18:46:31 2007 From: ben-ekiga at bjencks.net (Ben Jencks) Date: Thu, 05 Jul 2007 11:46:31 -0700 Subject: [Ekiga-list] Creative Optia problems In-Reply-To: <1183654199.23259.138.camel@achille> (sevmek@free.fr's message of "Thu, 05 Jul 2007 18:49:59 +0200") References: <1183585268.23259.87.camel@achille> <1183653875.23259.137.camel@achille> <1183654199.23259.138.camel@achille> Message-ID: yannick writes: > Le jeudi 05 juillet 2007 ? 18:44 +0200, yannick a ?crit : >> src/: ptlib/common/tinyjpeg.cxx > ^^ This is the patch you need. Okay, I've gotten the patch. Is there a debian/ubuntu source package of the release available, so I can apply the patch and build a package? I found the svn snapshot source repository, but not release versions. Thanks, -Ben Jencks From sevmek at free.fr Thu Jul 5 23:00:27 2007 From: sevmek at free.fr (yannick) Date: Fri, 06 Jul 2007 01:00:27 +0200 Subject: [Ekiga-list] Creative Optia problems In-Reply-To: References: <1183585268.23259.87.camel@achille> <1183653875.23259.137.camel@achille> <1183654199.23259.138.camel@achille> Message-ID: <1183676428.23259.211.camel@achille> Le jeudi 05 juillet 2007 ? 11:46 -0700, Ben Jencks a ?crit : > yannick writes: > > > Le jeudi 05 juillet 2007 ? 18:44 +0200, yannick a ?crit : > >> src/: ptlib/common/tinyjpeg.cxx > > ^^ This is the patch you need. > > Okay, I've gotten the patch. Is there a debian/ubuntu source package > of the release available, so I can apply the patch and build a package? > I found the svn snapshot source repository, but not release versions. > Here maybe : http://saillard.org/ekiga/ubuntu-feisty-x86/sources/ Regards, Yannick > Thanks, > -Ben Jencks > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From ben-ekiga at bjencks.net Fri Jul 6 20:03:42 2007 From: ben-ekiga at bjencks.net (Ben Jencks) Date: Fri, 06 Jul 2007 13:03:42 -0700 Subject: [Ekiga-list] Creative Optia problems In-Reply-To: <1183676428.23259.211.camel@achille> (sevmek@free.fr's message of "Fri, 06 Jul 2007 01:00:27 +0200") References: <1183585268.23259.87.camel@achille> <1183653875.23259.137.camel@achille> <1183654199.23259.138.camel@achille> <1183676428.23259.211.camel@achille> Message-ID: yannick writes: > Le jeudi 05 juillet 2007 ? 11:46 -0700, Ben Jencks a ?crit : >> yannick writes: >> >> > Le jeudi 05 juillet 2007 ? 18:44 +0200, yannick a ?crit : >> >> src/: ptlib/common/tinyjpeg.cxx >> > ^^ This is the patch you need. >> >> Okay, I've gotten the patch. Is there a debian/ubuntu source package >> of the release available, so I can apply the patch and build a package? >> I found the svn snapshot source repository, but not release versions. >> > > Here maybe : http://saillard.org/ekiga/ubuntu-feisty-x86/sources/ Wonderful, that patch fixed it and now I have working video! Thanks, -Ben Jencks From sevmek at free.fr Fri Jul 6 20:39:23 2007 From: sevmek at free.fr (yannick) Date: Fri, 06 Jul 2007 22:39:23 +0200 Subject: [Ekiga-list] Creative Optia problems In-Reply-To: References: <1183585268.23259.87.camel@achille> <1183653875.23259.137.camel@achille> <1183654199.23259.138.camel@achille> <1183676428.23259.211.camel@achille> Message-ID: <1183754363.23259.234.camel@achille> Le vendredi 06 juillet 2007 ? 13:03 -0700, Ben Jencks a ?crit : > yannick writes: > > > Le jeudi 05 juillet 2007 ? 11:46 -0700, Ben Jencks a ?crit : > >> yannick writes: > >> > >> > Le jeudi 05 juillet 2007 ? 18:44 +0200, yannick a ?crit : > >> >> src/: ptlib/common/tinyjpeg.cxx > >> > ^^ This is the patch you need. > >> > >> Okay, I've gotten the patch. Is there a debian/ubuntu source package > >> of the release available, so I can apply the patch and build a package? > >> I found the svn snapshot source repository, but not release versions. > >> > > > > Here maybe : http://saillard.org/ekiga/ubuntu-feisty-x86/sources/ > > Wonderful, that patch fixed it and now I have working video! :) Thanks to Matthias for the patch and he pointed me there, to Damien for the commit and to Luc for the source package. Regards, Yannick > > Thanks, > -Ben Jencks > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dford at ansur.demon.co.uk Fri Jul 6 21:05:43 2007 From: dford at ansur.demon.co.uk (David Ford) Date: Fri, 06 Jul 2007 22:05:43 +0100 Subject: [Ekiga-list] gnome-doc-utils Message-ID: <468EAEA7.3040405@ansur.demon.co.uk> Hi Fedora Core 3 Trying to build from sources pwlib - biutl OK opal - built OK ekiga - fails - No package 'gnome-doc-utils' found I've hunted around and read almost all the Gnome Documentation Project pages but I can't find an rpm or even the sources for this. Does anyone know where to find them? Maybe it's possible to build ekiga without the documentation? Thanks David From lists at dcorking.com Fri Jul 6 21:19:17 2007 From: lists at dcorking.com (David Corking) Date: Fri, 6 Jul 2007 22:19:17 +0100 Subject: [Ekiga-list] gnome-doc-utils In-Reply-To: <468EAEA7.3040405@ansur.demon.co.uk> References: <468EAEA7.3040405@ansur.demon.co.uk> Message-ID: On 7/6/07, David Ford wrote: > Hi > Fedora Core 3 > Trying to build from sources > pwlib - biutl OK > opal - built OK > ekiga - fails - No package 'gnome-doc-utils' found > > I've hunted around and read almost all the Gnome Documentation Project > pages but I can't find an rpm or even the sources for this. Does anyone > know where to find them? Maybe it's possible to build ekiga without the > documentation? ?? gnome-doc-utils is part of the standard GNOME distribution If you really can't find the right rpms in your normal Fedora repository, you could download the source tarball from gnome.org, for example from here: http://ftp.gnome.org/pub/GNOME/desktop/2.18/2.18.3/sources/ -- David From dford at ansur.demon.co.uk Fri Jul 6 22:43:26 2007 From: dford at ansur.demon.co.uk (David Ford) Date: Fri, 06 Jul 2007 23:43:26 +0100 Subject: [Ekiga-list] gnome-doc-utils In-Reply-To: References: <468EAEA7.3040405@ansur.demon.co.uk> Message-ID: <468EC58E.3000909@ansur.demon.co.uk> Thanks David It looks like it's not going to work - gnome-doc-utils compiled OK after I installed libxslt-devel, but after all that it turned out I need gtk+-2 and fc3 uses gtk+-1.2 - so no ekiga until I upgrade to fc6 or so by the looks of things. That's a lot of work for very little gain at this time. It'll have to wait until I become irritated enough with fc3! Thanks for your help David David Corking wrote: > On 7/6/07, David Ford wrote: > >> Hi >> Fedora Core 3 >> Trying to build from sources >> pwlib - biutl OK >> opal - built OK >> ekiga - fails - No package 'gnome-doc-utils' found >> >> I've hunted around and read almost all the Gnome Documentation Project >> pages but I can't find an rpm or even the sources for this. Does anyone >> know where to find them? Maybe it's possible to build ekiga without the >> documentation? >> > > ?? gnome-doc-utils is part of the standard GNOME distribution > > If you really can't find the right rpms in your normal Fedora > repository, you could download the source tarball from gnome.org, for > example from here: > http://ftp.gnome.org/pub/GNOME/desktop/2.18/2.18.3/sources/ > > From sevmek at free.fr Fri Jul 6 23:01:55 2007 From: sevmek at free.fr (yannick) Date: Sat, 07 Jul 2007 01:01:55 +0200 Subject: [Ekiga-list] gnome-doc-utils In-Reply-To: <468EC58E.3000909@ansur.demon.co.uk> References: <468EAEA7.3040405@ansur.demon.co.uk> <468EC58E.3000909@ansur.demon.co.uk> Message-ID: <1183762915.23259.238.camel@achille> Hi, I'm not sure it will work, try to ./configure ekiga with this option : --disable-doc Regards, Yannick Le vendredi 06 juillet 2007 ? 23:43 +0100, David Ford a ?crit : > Thanks David > It looks like it's not going to work - gnome-doc-utils compiled OK after > I installed libxslt-devel, but after all that it turned out I need > gtk+-2 and fc3 uses gtk+-1.2 - so no ekiga until I upgrade to fc6 or so > by the looks of things. > That's a lot of work for very little gain at this time. It'll have to > wait until I become irritated enough with fc3! > Thanks for your help > David > > David Corking wrote: > > On 7/6/07, David Ford wrote: > > > >> Hi > >> Fedora Core 3 > >> Trying to build from sources > >> pwlib - biutl OK > >> opal - built OK > >> ekiga - fails - No package 'gnome-doc-utils' found > >> > >> I've hunted around and read almost all the Gnome Documentation Project > >> pages but I can't find an rpm or even the sources for this. Does anyone > >> know where to find them? Maybe it's possible to build ekiga without the > >> documentation? > >> > > > > ?? gnome-doc-utils is part of the standard GNOME distribution > > > > If you really can't find the right rpms in your normal Fedora > > repository, you could download the source tarball from gnome.org, for > > example from here: > > http://ftp.gnome.org/pub/GNOME/desktop/2.18/2.18.3/sources/ > > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From lists at dcorking.com Fri Jul 6 23:52:04 2007 From: lists at dcorking.com (David Corking) Date: Sat, 7 Jul 2007 00:52:04 +0100 Subject: [Ekiga-list] gnome-doc-utils In-Reply-To: <1183762915.23259.238.camel@achille> References: <468EAEA7.3040405@ansur.demon.co.uk> <468EC58E.3000909@ansur.demon.co.uk> <1183762915.23259.238.camel@achille> Message-ID: > Le vendredi 06 juillet 2007 ? 23:43 +0100, David Ford a ?crit : > > Thanks David > > It looks like it's not going to work - gnome-doc-utils compiled OK after > > I installed libxslt-devel, but after all that it turned out I need > > gtk+-2 and fc3 uses gtk+-1.2 - so no ekiga until I upgrade to fc6 or so > > by the looks of things. > > That's a lot of work for very little gain at this time. It'll have to > > wait until I become irritated enough with fc3! You may be mistaken. I am not a Fedora user, but AFAICT Fedora Core 3 contains gnome 2.8 and gtk2-2.4.13 (I think Red Hat tried to fool you by omitting the + from the rpm name. As you noticed, FC3 also contains gtk+-1.2.10) However, FC3 pre-dates Ekiga 2.0 by about 2 years. Ekiga 2.0 only compiles with fairly recent versions of gnome. It is likely to work on gnome 2.12 or later, and was first officially released with gnome 2.14 in spring 2006. The current release, 2.0.9, is mostly tested with gnome 2.18 and 2.19. (Even numbered releases of gnome come out every 6 months.) You probably want to get a more recent version of gnome on your machine (I think yum and apt4rpm can do that.) -- David From mcs1 at ntlworld.com Tue Jul 10 18:33:36 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Tue, 10 Jul 2007 19:33:36 +0100 (BST) Subject: [Ekiga-list] logitech messenger camera Message-ID: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> Hi, I have got a logitech messenger webcam on debian testing (AMD64). I use the? gspca driver and the camera works fine using e.g., kopete. However, ekiga only shows a part of the picture. What I read this is a scaling problem (to get to lower resolution) and? the main web page? FAQ suggests to? post in the mailing list. Here we go......... Any help would be greatly appreciated. Cheers Michael Powered by Open-Xchange.com From steve at gammafactor.com Tue Jul 10 19:49:53 2007 From: steve at gammafactor.com (Steven R. Anderson) Date: Tue, 10 Jul 2007 14:49:53 -0500 (CDT) Subject: [Ekiga-list] logitech messenger camera In-Reply-To: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> References: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> On Tue, July 10, 2007 1:33 pm, Michael Stockenhuber wrote: > Hi, > > I have got a logitech messenger webcam on debian testing (AMD64). I use > the? gspca driver and the camera works fine using e.g., kopete. However, > ekiga only shows a part of the picture. What I read this is a scaling > problem (to get to lower resolution) and? the main web page? FAQ > suggests to? post in the mailing list. > Here we go......... > Any help would be greatly appreciated. > Cheers > > Michael Powered by Open-Xchange.com > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list FYI, I have the same video problem when running Ekiga on Debian Etch - i386, using a 3-com HomeConnect USB camera. From ethy.brito at inexo.com.br Tue Jul 10 21:30:55 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Tue, 10 Jul 2007 18:30:55 -0300 Subject: [Ekiga-list] pointer to gconf problems Message-ID: <20070710183055.252d9676@babalu.inexo.com.br> Hi When I start ekiga it complains it got a invalid GCONF value for the /apps/ekiga/general/gconf_test_age key. I followed the instructions I found at FAQ with no results. I am using Slackeware 10.2 and ekiga 2.0.9 (compiled from source) Anybody could point me some other info on how to fix this? Regards Ethy From jan.schampera at web.de Wed Jul 11 05:01:45 2007 From: jan.schampera at web.de (Jan Schampera) Date: Wed, 11 Jul 2007 07:01:45 +0200 Subject: [Ekiga-list] pointer to gconf problems In-Reply-To: <20070710183055.252d9676@babalu.inexo.com.br> References: <20070710183055.252d9676@babalu.inexo.com.br> Message-ID: <20070711070145.5e2af0b6@mainserver.home.thebonsai.de> On Tue, 10 Jul 2007 18:30:55 -0300 "Ethy H. Brito" wrote: > When I start ekiga it complains it got a invalid > GCONF value for the /apps/ekiga/general/gconf_test_age key. > > I followed the instructions I found at FAQ with no results. > > I am using Slackeware 10.2 and ekiga 2.0.9 (compiled from source) > > Anybody could point me some other info on how to fix this? Did you actually do "make install" after compile? It should install new values (also the test_age key). The GConfd restart procedure is just because of GConfd cache, but your database seems to have the old values stored. J. From jpuydt at free.fr Wed Jul 11 08:45:07 2007 From: jpuydt at free.fr (Julien Puydt) Date: Wed, 11 Jul 2007 10:45:07 +0200 Subject: [Ekiga-list] logitech messenger camera In-Reply-To: <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> References: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> Message-ID: <46949893.5040405@free.fr> Steven R. Anderson a ?crit : > On Tue, July 10, 2007 1:33 pm, Michael Stockenhuber wrote: >> I have got a logitech messenger webcam on debian testing (AMD64). I use >> the? gspca driver and the camera works fine using e.g., kopete. However, >> ekiga only shows a part of the picture. What I read this is a scaling >> problem (to get to lower resolution) and? the main web page? FAQ >> suggests to? post in the mailing list. > FYI, I have the same video problem when running Ekiga on Debian Etch - > i386, using a 3-com HomeConnect USB camera. Kopete asks a width x height to the webcam's driver. The webcam's driver is able to do that and replies "Ok". Image is perfect! Ekiga asks another width x height to the driver. The webcam's driver is unable to deliver that, so it should reply "I can't", but instead, it replies "Ok". Image is incorrect. Ekiga can't do anything : the driver has to be fixed not to lie : if the driver says "I can't", ekiga will try something else. Snark on #ekiga From mcs1 at ntlworld.com Wed Jul 11 10:52:34 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Wed, 11 Jul 2007 11:52:34 +0100 (BST) Subject: [Ekiga-list] logitech messenger camera In-Reply-To: <46949893.5040405@free.fr> References: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> <46949893.5040405@free.fr> Message-ID: <26255574.341184151154867.OPEN-XCHANGE.WebMail.nobody@sam> Any suggestions on how to fix and/or get a different driver? Cheers Michael On Wed 11.07.2007 09:45, Julien Puydt wrote: >Steven R. Anderson a ?crit : >>On Tue, July 10, 2007 1:33 pm, Michael Stockenhuber wrote: > >>>I have got a logitech messenger webcam on debian testing (AMD64). I >>>use >>>the? gspca driver and the camera works fine using e.g., kopete. >>>However, >>>ekiga only shows a part of the picture. What I read this is a scaling >>>problem (to get to lower resolution) and? the main web page? FAQ >>>suggests to? post in the mailing list. > >>FYI, I have the same video problem when running Ekiga on Debian Etch - >>i386, using a 3-com HomeConnect USB camera. > >Kopete asks a width x height to the webcam's driver. >The webcam's driver is able to do that and replies "Ok". >Image is perfect! > >Ekiga asks another width x height to the driver. >The webcam's driver is unable to deliver that, so it should reply "I >can't", but instead, it replies "Ok". >Image is incorrect. > >Ekiga can't do anything : the driver has to be fixed not to lie : if >the >driver says "I can't", ekiga will try something else. > >Snark on #ekiga >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From dford at ansur.demon.co.uk Wed Jul 11 11:15:03 2007 From: dford at ansur.demon.co.uk (David Ford) Date: Wed, 11 Jul 2007 12:15:03 +0100 Subject: [Ekiga-list] logitech messenger camera In-Reply-To: <26255574.341184151154867.OPEN-XCHANGE.WebMail.nobody@sam> References: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> <46949893.5040405@free.fr> <26255574.341184151154867.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <4694BBB7.1050603@ansur.demon.co.uk> Try :- Michel Xhaard http://mxhaard.free.fr He writes most of the webcam drivers for Linux. David Michael Stockenhuber wrote: > Any suggestions on how to fix and/or get a different driver? > Cheers > > Michael > > On Wed 11.07.2007 09:45, Julien Puydt wrote: > > >> Steven R. Anderson a ?crit : >> >>> On Tue, July 10, 2007 1:33 pm, Michael Stockenhuber wrote: >>> >>>> I have got a logitech messenger webcam on debian testing (AMD64). I >>>> use >>>> the? gspca driver and the camera works fine using e.g., kopete. >>>> However, >>>> ekiga only shows a part of the picture. What I read this is a scaling >>>> problem (to get to lower resolution) and? the main web page? FAQ >>>> suggests to? post in the mailing list. >>>> >>> FYI, I have the same video problem when running Ekiga on Debian Etch - >>> i386, using a 3-com HomeConnect USB camera. >>> >> Kopete asks a width x height to the webcam's driver. >> The webcam's driver is able to do that and replies "Ok". >> Image is perfect! >> >> Ekiga asks another width x height to the driver. >> The webcam's driver is unable to deliver that, so it should reply "I >> can't", but instead, it replies "Ok". >> Image is incorrect. >> >> Ekiga can't do anything : the driver has to be fixed not to lie : if >> the >> driver says "I can't", ekiga will try something else. >> >> Snark on #ekiga >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > Powered by Open-Xchange.com > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From mcs1 at ntlworld.com Wed Jul 11 11:47:13 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Wed, 11 Jul 2007 12:47:13 +0100 (BST) Subject: [Ekiga-list] logitech messenger camera In-Reply-To: <4694BBB7.1050603@ansur.demon.co.uk> References: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> <46949893.5040405@free.fr> <26255574.341184151154867.OPEN-XCHANGE.WebMail.nobody@sam> <4694BBB7.1050603@ansur.demon.co.uk> Message-ID: <26100519.351184154433659.OPEN-XCHANGE.WebMail.nobody@sam> Thank you all for the replies. I suppose the debian GSPCA driver I use is the one from Michel Xhaard. Cheers Michael On Wed 11.07.2007 12:15, David Ford wrote: >Try :- >Michel Xhaard > >http://mxhaard.free.fr > >He writes most of the webcam drivers for Linux. > >David > >Michael Stockenhuber wrote: >>Any suggestions on how to fix and/or get a different driver? >>Cheers >> >>Michael >> >>On Wed 11.07.2007 09:45, Julien Puydt wrote: >> >> >>>Steven R. Anderson a ?crit : >>> >>>>On Tue, July 10, 2007 1:33 pm, Michael Stockenhuber wrote: >>>> >>>>>I have got a logitech messenger webcam on debian testing (AMD64). I >>>>>use >>>>>the? gspca driver and the camera works fine using e.g., kopete. >>>>>However, >>>>>ekiga only shows a part of the picture. What I read this is a >>>>>scaling >>>>>problem (to get to lower resolution) and? the main web page? FAQ >>>>>suggests to? post in the mailing list. >>>>> >>>>FYI, I have the same video problem when running Ekiga on Debian Etch >>>>- >>>>i386, using a 3-com HomeConnect USB camera. >>>> >>>Kopete asks a width x height to the webcam's driver. >>>The webcam's driver is able to do that and replies "Ok". >>>Image is perfect! >>> >>>Ekiga asks another width x height to the driver. >>>The webcam's driver is unable to deliver that, so it should reply "I >>>can't", but instead, it replies "Ok". >>>Image is incorrect. >>> >>>Ekiga can't do anything : the driver has to be fixed not to lie : if >>>the >>>driver says "I can't", ekiga will try something else. >>> >>>Snark on #ekiga >>>_______________________________________________ >>>ekiga-list mailing list >>>ekiga-list at gnome.org >>>http://mail.gnome.org/mailman/listinfo/ekiga-list >>> >>Powered by Open-Xchange.com >> >>_______________________________________________ >>ekiga-list mailing list >>ekiga-list at gnome.org >>http://mail.gnome.org/mailman/listinfo/ekiga-list >> > >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From dford at ansur.demon.co.uk Wed Jul 11 12:29:26 2007 From: dford at ansur.demon.co.uk (David Ford) Date: Wed, 11 Jul 2007 13:29:26 +0100 Subject: [Ekiga-list] logitech messenger camera In-Reply-To: <26100519.351184154433659.OPEN-XCHANGE.WebMail.nobody@sam> References: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> <46949893.5040405@free.fr> <26255574.341184151154867.OPEN-XCHANGE.WebMail.nobody@sam> <4694BBB7.1050603@ansur.demon.co.uk> <26100519.351184154433659.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <4694CD26.7090606@ansur.demon.co.uk> Probably it is his driver - email him - he was very helpful when I had a problem with a webcam driver (for a different program) - I'm sure he would like to know that the driver causes a problem - it might be a bug he can fix. David Michael Stockenhuber wrote: > Thank you all for the replies. I suppose the debian GSPCA driver I use > is the one from Michel Xhaard. > Cheers > Michael > > > On Wed 11.07.2007 12:15, David Ford wrote: > > >> Try :- >> Michel Xhaard >> >> http://mxhaard.free.fr >> >> He writes most of the webcam drivers for Linux. >> >> David >> >> Michael Stockenhuber wrote: >> >>> Any suggestions on how to fix and/or get a different driver? >>> Cheers >>> >>> Michael >>> >>> On Wed 11.07.2007 09:45, Julien Puydt wrote: >>> >>> >>> >>>> Steven R. Anderson a ?crit : >>>> >>>> >>>>> On Tue, July 10, 2007 1:33 pm, Michael Stockenhuber wrote: >>>>> >>>>> >>>>>> I have got a logitech messenger webcam on debian testing (AMD64). I >>>>>> use >>>>>> the? gspca driver and the camera works fine using e.g., kopete. >>>>>> However, >>>>>> ekiga only shows a part of the picture. What I read this is a >>>>>> scaling >>>>>> problem (to get to lower resolution) and? the main web page? FAQ >>>>>> suggests to? post in the mailing list. >>>>>> >>>>>> >>>>> FYI, I have the same video problem when running Ekiga on Debian Etch >>>>> - >>>>> i386, using a 3-com HomeConnect USB camera. >>>>> >>>>> >>>> Kopete asks a width x height to the webcam's driver. >>>> The webcam's driver is able to do that and replies "Ok". >>>> Image is perfect! >>>> >>>> Ekiga asks another width x height to the driver. >>>> The webcam's driver is unable to deliver that, so it should reply "I >>>> can't", but instead, it replies "Ok". >>>> Image is incorrect. >>>> >>>> Ekiga can't do anything : the driver has to be fixed not to lie : if >>>> the >>>> driver says "I can't", ekiga will try something else. >>>> >>>> Snark on #ekiga >>>> _______________________________________________ >>>> ekiga-list mailing list >>>> ekiga-list at gnome.org >>>> http://mail.gnome.org/mailman/listinfo/ekiga-list >>>> >>>> >>> Powered by Open-Xchange.com >>> >>> _______________________________________________ >>> ekiga-list mailing list >>> ekiga-list at gnome.org >>> http://mail.gnome.org/mailman/listinfo/ekiga-list >>> >>> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> > Powered by Open-Xchange.com > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From ethy.brito at inexo.com.br Wed Jul 11 13:41:26 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Wed, 11 Jul 2007 10:41:26 -0300 Subject: [Ekiga-list] pointer to gconf problems In-Reply-To: <20070711070145.5e2af0b6@mainserver.home.thebonsai.de> References: <20070710183055.252d9676@babalu.inexo.com.br> <20070711070145.5e2af0b6@mainserver.home.thebonsai.de> Message-ID: <20070711104126.3ae20edc@babalu.inexo.com.br> On Wed, 11 Jul 2007 07:01:45 +0200 Jan Schampera wrote: > On Tue, 10 Jul 2007 18:30:55 -0300 > "Ethy H. Brito" wrote: > > > When I start ekiga it complains it got a invalid > > GCONF value for the /apps/ekiga/general/gconf_test_age key. > > > > I followed the instructions I found at FAQ with no results. > > > > I am using Slackeware 10.2 and ekiga 2.0.9 (compiled from source) > > > > Anybody could point me some other info on how to fix this? > > Did you actually do "make install" after compile? Yes I did. And after playing with gconf-editor I found that ekiga.schemas has its first line splited. I joined these two line and ekiga/gconf became happy. Ethy From ethy.brito at inexo.com.br Wed Jul 11 13:55:14 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Wed, 11 Jul 2007 10:55:14 -0300 Subject: [Ekiga-list] no audio xmit Message-ID: <20070711105514.43122781@babalu.inexo.com.br> Hi Ekiga can't xmit any audio. I can register, place a call, I hear what my partner say but I got this window: ------------------------------------------------------------ Could not open audio channel for audio transmission An error occured while trying to record from the soundcard for the audio transmission. Please check that your soundcard is not busy and that your driver supports full-duplex. The audio transmission has been disabled. ----------------------------------------------------------- I used strace to find out what device is ekiga opening but its output is way too long and of no help. I have xten for Windows in this same machine running under VMWARE and it can place a call without any trouble. My audio card is a NVidia NForce 3. Any help will be appreciated. Thanx Ethy From ethy.brito at inexo.com.br Wed Jul 11 15:29:20 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Wed, 11 Jul 2007 12:29:20 -0300 Subject: [Ekiga-list] no audio xmit In-Reply-To: <20070711105514.43122781@babalu.inexo.com.br> References: <20070711105514.43122781@babalu.inexo.com.br> Message-ID: <20070711122920.2e485173@babalu.inexo.com.br> On Wed, 11 Jul 2007 10:55:14 -0300 "Ethy H. Brito" wrote: > > Hi > > Ekiga can't xmit any audio. I can register, place a call, I hear what my > partner say but I got this window: > > ------------------------------------------------------------ > > Could not open audio channel for audio transmission > > An error occured while trying to record from the soundcard for the audio > transmission. Please check that your soundcard is not busy and that your > driver supports full-duplex. The audio transmission has been disabled. > ----------------------------------------------------------- > Just for the sake of completeness, I downloaded XTEN for linux and it is running flawlessly in this machine. Ethy From mcs1 at ntlworld.com Wed Jul 11 20:13:33 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Wed, 11 Jul 2007 21:13:33 +0100 (BST) Subject: [Ekiga-list] logitech messenger camera In-Reply-To: <4694CD26.7090606@ansur.demon.co.uk> References: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> <46949893.5040405@free.fr> <26255574.341184151154867.OPEN-XCHANGE.WebMail.nobody@sam> <4694BBB7.1050603@ansur.demon.co.uk> <26100519.351184154433659.OPEN-XCHANGE.WebMail.nobody@sam> <4694CD26.7090606@ansur.demon.co.uk> Message-ID: <33175995.361184184813357.OPEN-XCHANGE.WebMail.nobody@sam> Thank you very much. I will try that. Cheers Michael On Wed 11.07.2007 13:29, David Ford wrote: >Probably it is his driver - email him - he was very helpful when I had >a >problem with a webcam driver (for a different program) - I'm sure he >would like to know that the driver causes a problem - it might be a bug >he can fix. >David > >Michael Stockenhuber wrote: >>Thank you all for the replies. I suppose the debian GSPCA driver I use >>is the one from Michel Xhaard. >>Cheers >>Michael >> >> >>On Wed 11.07.2007 12:15, David Ford wrote: >> >> >>>Try :- >>>Michel Xhaard >>> >>>http://mxhaard.free.fr >>> >>>He writes most of the webcam drivers for Linux. >>> >>>David >>> >>>Michael Stockenhuber wrote: >>> >>>>Any suggestions on how to fix and/or get a different driver? >>>>Cheers >>>> >>>>Michael >>>> >>>>On Wed 11.07.2007 09:45, Julien Puydt wrote: >>>> >>>> >>>> >>>>>Steven R. Anderson a ?crit : >>>>> >>>>> >>>>>>On Tue, July 10, 2007 1:33 pm, Michael Stockenhuber wrote: >>>>>> >>>>>> >>>>>>>I have got a logitech messenger webcam on debian testing (AMD64). >>>>>>>I >>>>>>>use >>>>>>>the? gspca driver and the camera works fine using e.g., kopete. >>>>>>>However, >>>>>>>ekiga only shows a part of the picture. What I read this is a >>>>>>>scaling >>>>>>>problem (to get to lower resolution) and? the main web page? FAQ >>>>>>>suggests to? post in the mailing list. >>>>>>> >>>>>>> >>>>>>FYI, I have the same video problem when running Ekiga on Debian >>>>>>Etch >>>>>>- >>>>>>i386, using a 3-com HomeConnect USB camera. >>>>>> >>>>>> >>>>>Kopete asks a width x height to the webcam's driver. >>>>>The webcam's driver is able to do that and replies "Ok". >>>>>Image is perfect! >>>>> >>>>>Ekiga asks another width x height to the driver. >>>>>The webcam's driver is unable to deliver that, so it should reply >>>>>"I >>>>>can't", but instead, it replies "Ok". >>>>>Image is incorrect. >>>>> >>>>>Ekiga can't do anything : the driver has to be fixed not to lie : >>>>>if >>>>>the >>>>>driver says "I can't", ekiga will try something else. >>>>> >>>>>Snark on #ekiga >>>>>_______________________________________________ >>>>>ekiga-list mailing list >>>>>ekiga-list at gnome.org >>>>>http://mail.gnome.org/mailman/listinfo/ekiga-list >>>>> >>>>> >>>>Powered by Open-Xchange.com >>>> >>>>_______________________________________________ >>>>ekiga-list mailing list >>>>ekiga-list at gnome.org >>>>http://mail.gnome.org/mailman/listinfo/ekiga-list >>>> >>>> >>>_______________________________________________ >>>ekiga-list mailing list >>>ekiga-list at gnome.org >>>http://mail.gnome.org/mailman/listinfo/ekiga-list >>> >>Powered by Open-Xchange.com >> >>_______________________________________________ >>ekiga-list mailing list >>ekiga-list at gnome.org >>http://mail.gnome.org/mailman/listinfo/ekiga-list >> > >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From jpuydt at free.fr Thu Jul 12 06:01:55 2007 From: jpuydt at free.fr (Julien Puydt) Date: Thu, 12 Jul 2007 08:01:55 +0200 Subject: [Ekiga-list] no audio xmit In-Reply-To: <20070711105514.43122781@babalu.inexo.com.br> References: <20070711105514.43122781@babalu.inexo.com.br> Message-ID: <4695C3D3.5000500@free.fr> Ethy H. Brito a ?crit : > Ekiga can't xmit any audio. I can register, place a call, I hear what my > partner say but I got this window: > > ------------------------------------------------------------ > > Could not open audio channel for audio transmission > > An error occured while trying to record from the soundcard for the audio > transmission. Please check that your soundcard is not busy and that your > driver supports full-duplex. The audio transmission has been disabled. > ----------------------------------------------------------- > > I used strace to find out what device is ekiga opening but its output is > way too long and of no help. There is an audio test in the druid : does it succeed? My guess is that it doesn't. Are you using the ALSA plugin or the OSS plugin? Snark on #ekiga From ethy.brito at inexo.com.br Thu Jul 12 14:29:49 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Thu, 12 Jul 2007 11:29:49 -0300 Subject: [Ekiga-list] no audio xmit In-Reply-To: <4695C3D3.5000500@free.fr> References: <20070711105514.43122781@babalu.inexo.com.br> <4695C3D3.5000500@free.fr> Message-ID: <20070712112949.100b3b69@babalu.inexo.com.br> On Thu, 12 Jul 2007 08:01:55 +0200 Julien Puydt wrote: > > There is an audio test in the druid : does it succeed? My guess is that > it doesn't. Yes there is an audio test. And no, It doesn't succeed. I click on it and get: ---------------------------------------------------------------------- Failed to open the device Impossible to open the selected audio device (Default) for recording. Please check your audio setup, the permissions and that the device is not busy. --------------------------------------------------------------------- But, as a Linux application, it could at least give a little more useful message. What audio device is it trying to open??? /dev/WHAT??? "Default" is meaningless. At least for me. As I said in other email, XTEN (for linux) works flawlessly. It uses /dev/dsp. > Are you using the ALSA plugin or the OSS plugin? There is no OSS plugin option. Just ALSA. Thanx for you help so far. Regards Ethy From tparker at cpsco.net Thu Jul 12 15:01:33 2007 From: tparker at cpsco.net (Allen T Parker) Date: Thu, 12 Jul 2007 08:01:33 -0700 Subject: [Ekiga-list] Registration Failed Message-ID: <1184252493.4244.13.camel@localhost> I have been a ekiga user for 5 months. Occasionally, when I reboot, I get a 'Registration Failed ' message. However, clicking on the Ekiga Service in the accounts menu successfully registers my account. Today, I am unable to register my account after many attempts. Went to http://www/ekiga.net and tried to access my account. This also failed with a message "DB Error: connection failed Bad username or password". What happened???? Am I no longer registered?????? I also subscribe to PC-to-Phone and that account registers successfully. My user name is tparker and I am running ekiga under fc6. Thanks for any info. Tom Parker From frmas at free.fr Thu Jul 12 15:07:26 2007 From: frmas at free.fr (Francois) Date: Thu, 12 Jul 2007 17:07:26 +0200 Subject: [Ekiga-list] Registration Failed In-Reply-To: <1184252493.4244.13.camel@localhost> References: <1184252493.4244.13.camel@localhost> Message-ID: <200707121707.26707.frmas@free.fr> On jeudi 12 juillet 2007, Allen T Parker wrote: Hello, > I have been a ekiga user for 5 months. Occasionally, when I reboot, I > get a 'Registration Failed ' message. However, clicking on the Ekiga > Service in the accounts menu successfully registers my account. Yeap I got that from time to time. > Today, I am unable to register my account after many attempts. Went to > http://www/ekiga.net and tried to access my account. This also failed > with a message "DB Error: connection failed Bad username or password". > > What happened???? Am I no longer registered?????? Don't worry, I have the same here. Maybe the server is down. Francois From balachandra.maddina at gmail.com Fri Jul 13 10:03:29 2007 From: balachandra.maddina at gmail.com (balachandra maddina) Date: Fri, 13 Jul 2007 15:33:29 +0530 Subject: [Ekiga-list] i have problem while installing ekagi Message-ID: <175eef180707130303r2e80c894y29197729ed32b24@mail.gmail.com> hi in the process of installing ekagi on my system i got the following error. No package 'avahi-glib' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables AVAHI_CFLAGS and AVAHI_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. but i already have avahi-glib in my fedora core 6 pls suggest me what to do n pls reply back to this id balachandra.maddina at gmail.com thx for the help, bala. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Fri Jul 13 10:24:07 2007 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 13 Jul 2007 12:24:07 +0200 Subject: [Ekiga-list] i have problem while installing ekagi In-Reply-To: <175eef180707130303r2e80c894y29197729ed32b24@mail.gmail.com> References: <175eef180707130303r2e80c894y29197729ed32b24@mail.gmail.com> Message-ID: <469752C7.1070004@free.fr> balachandra maddina a ?crit : > hi in the process of installing ekagi on my system i got the following > error. > > No package 'avahi-glib' found > > Consider adjusting the PKG_CONFIG_PATH environment variable if you > installed software in a non-standard prefix. > > Alternatively, you may set the environment variables AVAHI_CFLAGS > and AVAHI_LIBS to avoid the need to call pkg-config. > See the pkg-config man page for more details. > > > but i already have avahi-glib in my fedora core 6 pls suggest me what to do > n pls reply back to this id balachandra.maddina at gmail.com > The message is pretty explicit: wouldn't you lack a avahi-glib-devel package? You should first check whether we have a package ready for your system, since compiling pwlib+opal+ekiga isn't as easy as it could. Snark on #ekiga From schoappied at gmail.com Fri Jul 13 15:14:03 2007 From: schoappied at gmail.com (schoappied) Date: Fri, 13 Jul 2007 17:14:03 +0200 Subject: [Ekiga-list] ? Message-ID: <469796BB.7080108@gmail.com> Hi guys, I was thinking to try Ekiga, because it's open source. I do use skype now. I do not understand the (1) login procedure of Ekiga. In skype the login goes automatically.. Must I always login on the internet when I want to using Ekiga? When I try to (2) start Ekiga I get... irk at dirk-desktop:~$ ekiga (ekiga:8500): Gnome-WARNING **: invalid gnome config path '=/section/key' (ekiga:8500): GLib-GObject-WARNING **: gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog' (ekiga:8500): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed Bonobo accessibility support initialized GTK Accessibility Module initialized ** (ekiga:8500): WARNING **: AT_SPI_REGISTRY was not started at session startup. ** (ekiga:8500): WARNING **: IOR not set. ** (ekiga:8500): WARNING **: Could not locate registry Where can I read your (3) privacy policy? I hope you can help me with this 3 questions! Greetz, Dirk (I'm using KDE) From jan.schampera at web.de Sat Jul 14 06:17:48 2007 From: jan.schampera at web.de (Jan Schampera) Date: Sat, 14 Jul 2007 08:17:48 +0200 Subject: [Ekiga-list] ? In-Reply-To: <469796BB.7080108@gmail.com> References: <469796BB.7080108@gmail.com> Message-ID: <20070714081748.0592bb89@mainserver.home.thebonsai.de> Hi! Sorry for not being faster when you asked on IRC (TheBonsai) :-) > I was thinking to try Ekiga, because it's open source. I do use skype > now. I do not understand the (1) login procedure of Ekiga. In skype > the login goes automatically.. Must I always login on the internet > when I want to using Ekiga? (1) The login procedure is simple, Ekiga registers at the configured provider's VoIP service at startup. Then yes, you need Internet. The configured provider is, when you signed up for an account at Ekiga.net and configured it in the druid, the Ekiga.net account. But that's "just an account", Ekiga is of course NOT bound to Ekiga.net, you can use any standard SIP provider. For simple internal communication (PC to PC in LAN) you shouldn't need Internet - is that what you were asking for? > When I try to (2) start Ekiga I get... > > irk at dirk-desktop:~$ ekiga > > (ekiga:8500): Gnome-WARNING **: invalid gnome config path > '=/section/key' > > (ekiga:8500): GLib-GObject-WARNING **: gsignal.c:1019: unable to > lookup signal "show" of unloaded type `GtkMessageDialog' > > (ekiga:8500): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: > assertion `signal_id > 0' failed > Bonobo accessibility support initialized > GTK Accessibility Module initialized > > ** (ekiga:8500): WARNING **: AT_SPI_REGISTRY was not started at > session startup. > > ** (ekiga:8500): WARNING **: IOR not set. > > ** (ekiga:8500): WARNING **: Could not locate registry (2) looks like a broken installation. Which version on which operating system? > Where can I read your (3) privacy policy? Yannick? In general: Maybe you can describe what you want to use Ekiga for and under which (network) conditions you want to use it. J. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From sevmek at free.fr Sat Jul 14 09:49:17 2007 From: sevmek at free.fr (yannick) Date: Sat, 14 Jul 2007 11:49:17 +0200 Subject: [Ekiga-list] i have problem while installing ekagi In-Reply-To: <469752C7.1070004@free.fr> References: <175eef180707130303r2e80c894y29197729ed32b24@mail.gmail.com> <469752C7.1070004@free.fr> Message-ID: <1184406557.6795.8.camel@achille> Le vendredi 13 juillet 2007 ? 12:24 +0200, Julien Puydt a ?crit : > You should first check whether we have a package ready for your > system, > since compiling pwlib+opal+ekiga isn't as easy as it could. > Packages for FC6 : http://wiki.ekiga.org/index.php/Linux_Users Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Sat Jul 14 09:53:58 2007 From: sevmek at free.fr (yannick) Date: Sat, 14 Jul 2007 11:53:58 +0200 Subject: [Ekiga-list] ? In-Reply-To: <20070714081748.0592bb89@mainserver.home.thebonsai.de> References: <469796BB.7080108@gmail.com> <20070714081748.0592bb89@mainserver.home.thebonsai.de> Message-ID: <1184406838.6795.13.camel@achille> Le samedi 14 juillet 2007 ? 08:17 +0200, Jan Schampera a ?crit : > > Where can I read your (3) privacy policy? > > Yannick? Well... We should fix this, there is nothing written about privacy. I started something long ago in the wiki but i lack infos. We need the expertise of someone for SIP & privacy. Damien is on holidays... http://wiki.ekiga.org/index.php/Ekiga.net_VoIP_service_subscription#What_about_privacy_and_VoIP_services_.3F Regards, Yannick > > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Sat Jul 14 09:55:49 2007 From: sevmek at free.fr (yannick) Date: Sat, 14 Jul 2007 11:55:49 +0200 Subject: [Ekiga-list] no audio xmit In-Reply-To: <20070712112949.100b3b69@babalu.inexo.com.br> References: <20070711105514.43122781@babalu.inexo.com.br> <4695C3D3.5000500@free.fr> <20070712112949.100b3b69@babalu.inexo.com.br> Message-ID: <1184406949.6795.14.camel@achille> Hi, Try the 2 tests there : http://wiki.ekiga.org/index.php/Getting_several_applications_using_the_sound_card_at_the_same_time_%3F#Troubleshooting Regards, Yannick Le jeudi 12 juillet 2007 ? 11:29 -0300, Ethy H. Brito a ?crit : > On Thu, 12 Jul 2007 08:01:55 +0200 > Julien Puydt wrote: > > > > > There is an audio test in the druid : does it succeed? My guess is that > > it doesn't. > > Yes there is an audio test. And no, It doesn't succeed. I click on it and get: > > ---------------------------------------------------------------------- > Failed to open the device > > Impossible to open the selected audio device (Default) for recording. > Please check your audio setup, the permissions and that the device is not > busy. > --------------------------------------------------------------------- > > But, as a Linux application, it could at least give a little more useful > message. > > What audio device is it trying to open??? /dev/WHAT??? > "Default" is meaningless. At least for me. > > As I said in other email, XTEN (for linux) works flawlessly. It > uses /dev/dsp. > > > Are you using the ALSA plugin or the OSS plugin? > > There is no OSS plugin option. Just ALSA. > > Thanx for you help so far. > Regards > > Ethy > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From frmas at free.fr Sat Jul 14 10:54:38 2007 From: frmas at free.fr (Francois) Date: Sat, 14 Jul 2007 12:54:38 +0200 Subject: [Ekiga-list] addressbook Message-ID: <200707141254.38211.frmas@free.fr> Hello, A search in the addressbook doesn't work anymore. Is there a problem with a server ? i'm running Ekiga 2.0.9 Another question about the addressbook, we can sort entries on the email addresses, the names, etc.. but not on the categories. I think this could be useful to search thru categories too. thank you for that great program. Francois -- -+-=-+-=-+-=-+-=-+-=-+-=-+-=- Arvernes System - Location : Island of Groix - Southern Brittany, France (To call me using IP Phone, Video Conference : sip:arvernes at ekiga.net) From sevmek at free.fr Sat Jul 14 12:36:45 2007 From: sevmek at free.fr (yannick) Date: Sat, 14 Jul 2007 14:36:45 +0200 Subject: [Ekiga-list] addressbook In-Reply-To: <200707141254.38211.frmas@free.fr> References: <200707141254.38211.frmas@free.fr> Message-ID: <1184416605.6795.22.camel@achille> Le samedi 14 juillet 2007 ? 12:54 +0200, Francois a ?crit : > Hello, > > A search in the addressbook doesn't work anymore. Is there a problem with a > server ? i'm running Ekiga 2.0.9 > Another question about the addressbook, we can sort entries on the email > addresses, the names, etc.. but not on the categories. I think this could > be useful to search thru categories too. > thank you for that great program. Francois As far as I can tell, it's fixed now. Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From marcel.dess at gmail.com Sat Jul 14 16:13:53 2007 From: marcel.dess at gmail.com (marcel dess) Date: Sat, 14 Jul 2007 12:13:53 -0400 Subject: [Ekiga-list] Config Windows Messenger 5.1 en for Ekiga Message-ID: <4698F641.5030506@gmail.com> Hi Config Windows Messenger 5.1 (en) for Ekiga http://manuxlinux.googlepages.com/c-ekiga-en.html Good Day ! From sevmek at free.fr Sat Jul 14 16:57:41 2007 From: sevmek at free.fr (yannick) Date: Sat, 14 Jul 2007 18:57:41 +0200 Subject: [Ekiga-list] Config Windows Messenger 5.1 en for Ekiga In-Reply-To: <4698F641.5030506@gmail.com> References: <4698F641.5030506@gmail.com> Message-ID: <1184432261.6795.42.camel@achille> Le samedi 14 juillet 2007 ? 12:13 -0400, marcel dess a ?crit : > Hi > > Config Windows Messenger 5.1 (en) for Ekiga > > http://manuxlinux.googlepages.com/c-ekiga-en.html > > Good Day ! Thank you a lot. :) Regards, Yannick > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Sun Jul 15 13:32:23 2007 From: sevmek at free.fr (yannick) Date: Sun, 15 Jul 2007 15:32:23 +0200 Subject: [Ekiga-list] Config Windows Messenger 5.1 en for Ekiga In-Reply-To: <1184432261.6795.42.camel@achille> References: <4698F641.5030506@gmail.com> <1184432261.6795.42.camel@achille> Message-ID: <1184506343.6795.61.camel@achille> Le samedi 14 juillet 2007 ? 18:57 +0200, yannick a ?crit : > Le samedi 14 juillet 2007 ? 12:13 -0400, marcel dess a ?crit : > > Hi > > > > Config Windows Messenger 5.1 (en) for Ekiga > > > > http://manuxlinux.googlepages.com/c-ekiga-en.html > > > > Good Day ! > > Thank you a lot. :) Is it possible to take your screenshots to integrate them in our wiki ? http://wiki.ekiga.org Thus having a special page for windows messenger 5.1 in our wiki with your screenshots ? Regards, Yannick > > Regards, > Yannick > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From rmohan43 at gmail.com Mon Jul 16 09:42:03 2007 From: rmohan43 at gmail.com (Raj Mohan Kovilath) Date: Mon, 16 Jul 2007 15:12:03 +0530 Subject: [Ekiga-list] Startup errors-Ekiga 2.0.9 ubuntu/feisty Message-ID: <34dea8b10707160242k72fa08acna4ef887dd0d32784@mail.gmail.com> Hello, When starting ekiga-2.0.9 on Ubuntu (Feisty) I get the following errors: ekiga Bonobo accessibility support initialized GTK Accessibility Module initialized ** (ekiga:11006): WARNING **: AT_SPI_REGISTRY was not started at session startup. ** (ekiga:11006): WARNING **: IOR not set. ** (ekiga:11006): WARNING **: Could not locate registry What do these errors mean ? How do I fix this? Thanks, -- Raj Mohan -------------- next part -------------- An HTML attachment was scrubbed... URL: From Elaine.Xiong at Sun.COM Mon Jul 16 10:15:12 2007 From: Elaine.Xiong at Sun.COM (elaine) Date: Mon, 16 Jul 2007 18:15:12 +0800 Subject: [Ekiga-list] Letter input Message-ID: <469B4530.2080007@sun.com> Hi, Could I ask a stupid question of how to input letters to the address bar by clicking the buttons on the dialpad? Ekiga is 2.0.9. Thanks , Best Regards, Elaine From palos at post.sk Mon Jul 16 10:03:58 2007 From: palos at post.sk (Palo S.) Date: 16 Jul 2007 12:03:58 +0200 (CEST) Subject: [Ekiga-list] GConf error under Windows version Message-ID: <469B428E.000005.12775@kamasutra> Hi all, I get GConf key error of invalid value of gconf_test_age when starting the Windows version of Ekiga. On the webpage on Ekiga troubleshooting I found that I should delete the file C:\\Documents and Settings\\YOUR LOGIN\\Applications Data\\ekiga.conf to fix this, however, there is no such file. Reinstallation of GTK and Ekiga does not help. I tried to search for a file that could store some Ekiga or Gconf configuration which is not removed when Ekiga and GTK are uninstalled, however, I could not find anything... __________ http://zabava.sme.sk/ - Str?nka ?o usmeje ti tv?r From vincent_luba at colombus.org Mon Jul 16 11:44:51 2007 From: vincent_luba at colombus.org (Vincent Luba) Date: Mon, 16 Jul 2007 13:44:51 +0200 Subject: [Ekiga-list] GConf error under Windows version In-Reply-To: <469B428E.000005.12775@kamasutra> References: <469B428E.000005.12775@kamasutra> Message-ID: <469B5A33.2010507@colombus.org> Palo S. a ?crit : > Hi all, > > I get GConf key error of invalid value of gconf_test_age > when starting the Windows version of Ekiga. On the webpage > on Ekiga troubleshooting I found that I should delete the file > C:\\Documents and Settings\\YOUR LOGIN\\Applications Data\\ekiga.conf > to fix this, however, there is no such file. [...] I guess that your windows configuration does not show "hidden" files. For winXP : http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/hiddenfiles.mspx Vincent From jpuydt at free.fr Mon Jul 16 11:59:46 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 16 Jul 2007 13:59:46 +0200 Subject: [Ekiga-list] Letter input In-Reply-To: <469B4530.2080007@sun.com> References: <469B4530.2080007@sun.com> Message-ID: <469B5DB2.70301@free.fr> elaine a ?crit : > Could I ask a stupid question of how to input letters to the address bar > by clicking the buttons on the dialpad? Ekiga is 2.0.9. You give focus to the address bar and type with the keyboard... Snark on #ekiga From jpuydt at free.fr Mon Jul 16 12:00:33 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 16 Jul 2007 14:00:33 +0200 Subject: [Ekiga-list] Startup errors-Ekiga 2.0.9 ubuntu/feisty In-Reply-To: <34dea8b10707160242k72fa08acna4ef887dd0d32784@mail.gmail.com> References: <34dea8b10707160242k72fa08acna4ef887dd0d32784@mail.gmail.com> Message-ID: <469B5DE1.9090908@free.fr> Raj Mohan Kovilath a ?crit : > Hello, > When starting ekiga-2.0.9 on Ubuntu (Feisty) I get the following errors: > > ekiga > Bonobo accessibility support initialized > GTK Accessibility Module initialized > > ** (ekiga:11006): WARNING **: AT_SPI_REGISTRY was not started at session > startup. > > ** (ekiga:11006): WARNING **: IOR not set. > > ** (ekiga:11006): WARNING **: Could not locate registry > > What do these errors mean ? > How do I fix this? Disable accessibility if you can, complain to the accessibility guys if you can't... Snark on #ekiga From jdkaye10 at yahoo.es Mon Jul 16 14:59:39 2007 From: jdkaye10 at yahoo.es (Jonathan Kaye) Date: Mon, 16 Jul 2007 16:59:39 +0200 Subject: [Ekiga-list] problem with 120 Spacecam Message-ID: <469B87DB.3080903@yahoo.es> Hi Ekiga-ers, This is a real puzzler and a challenge to all. I'm running Ekiga 2.0.3 on Debian Lenny with a 2.6.18-4-686 kernel. My DM is KDE somewhere between 3.5.5 and 3.5.7 as the KDE updates trickle down to testing. I rescued a Trust 120 Spacecam USB webcam that my friend was throwing out because he couldn't get it to work on windows ;-). I rescued it from the dustbin and found that it worked well (it's a cheap camera so "well" means it produced a recognisable image) with the spca5xx driver. The driver stopped working when I upgraded my kernel and I couldn't find the source code to rebuild it for the new kernel. After a few months I noticed that there was a Debian package spca5xx-source and I could build the module for my kernel and it worked!!!!!!!! For some reason I don't understand the webcam stopped functioning a few days ago. I haven't changed kernels but there have been some minor upgrades of xorg recently. The symptoms are that there is no image for xawtv, ekiga, kopete, that its little light stays on all the time whereas before it would only light up when it was being used by some program and then go off when the program terminated and finally, the whole system would lock up if I unplugged the videocam while the system was running. Even alt-sysrq + b wouldn't work and I had to do a hard reset. Be that as it may, I rebuilt the module (about 5 times) and still no luck. The little light shines and shines. No response from any programs except one. This is really weird: amsn is quite happy with it although the light doesn't go out when I shut down amsn. It still doesn't work with ekiga, xawtv or kopete. Now some information: Yes, I am a member of the video group. DMESG (relevant parts): sn9c102: V4L2 driver for SN9C10x PC Camera Controllers v1:1.27 usb 1-1: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x600D) usb 1-1: PAS106B image sensor detected PCI: Enabling device 0000:00:11.6 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 201 usb 1-1: Initialization succeeded usb 1-1: V4L2 device registered as /dev/video0 usbcore: registered new driver sn9c102 usbcore: registered new driver spca5xx /usr/src/modules/spca5xx/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 registered This seems ok. LSMOD (relevant bits): spca5xx 642384 0 videodev 21120 2 spca5xx,sn9c102 usbcore 112644 7 spca5xx,sn9c102,usbhid,usb_storage,ehci_hcd,uhci_hcd v4l1_compat 12036 1 videodev v4l2_common 20448 2 sn9c102,videodev This seems ok too. LSUSB: Bus 005 Device 004: ID 07ab:fcfe Freecom Technologies Bus 005 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 005: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse Bus 001 Device 004: ID 0c45:600d Microdia Bus 001 Device 001: ID 0000:0000 I guess the Microdia entry is the camera. Any detectives in the house? TIA, Jonathan ______________________________________________ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y m?viles desde 1 c?ntimo por minuto. http://es.voice.yahoo.com From dford at ansur.demon.co.uk Mon Jul 16 15:15:56 2007 From: dford at ansur.demon.co.uk (David Ford) Date: Mon, 16 Jul 2007 16:15:56 +0100 Subject: [Ekiga-list] problem with 120 Spacecam In-Reply-To: <469B87DB.3080903@yahoo.es> References: <469B87DB.3080903@yahoo.es> Message-ID: <469B8BAC.3050302@ansur.demon.co.uk> Hi Jonathan I had a similar problem - stopping modprobe loading both the spca5xx and sn9c102 modules fixed it for me. The spca5xx worked with everything where the sn9c102 only half worked with some programs. David Jonathan Kaye wrote: > Hi Ekiga-ers, > This is a real puzzler and a challenge to all. I'm running Ekiga 2.0.3 > on Debian Lenny with > a 2.6.18-4-686 kernel. My DM is KDE somewhere between 3.5.5 and 3.5.7 as > the KDE updates trickle down to testing. I rescued a Trust 120 Spacecam USB > webcam that my friend was throwing out because he couldn't get it to work > on windows ;-). I rescued it from the dustbin and found that it worked well > (it's a cheap camera so "well" means it produced a recognisable image) with > the spca5xx driver. The driver stopped working when I upgraded my kernel > and I couldn't find the source code to rebuild it for the new kernel. After > a few months I noticed that there was a Debian package spca5xx-source and I > could build the module for my kernel and it worked!!!!!!!! > > For some reason I don't understand the webcam stopped functioning a few days > ago. I haven't changed kernels but there have been some minor upgrades of > xorg recently. The symptoms are that there is no image for xawtv, ekiga, > kopete, that its little light stays on all the time whereas before it would > only light up when it was being used by some program and then go off when > the program terminated and finally, the whole system would lock up if I > unplugged the videocam while the system was running. Even alt-sysrq + b > wouldn't work and I had to do a hard reset. Be that as it may, I rebuilt > the module (about 5 times) and still no luck. The little light shines and > shines. No response from any programs except one. This is really weird: > amsn is quite happy with it although the light doesn't go out when I shut > down amsn. It still doesn't work with ekiga, xawtv or kopete. > Now some information: > Yes, I am a member of the video group. > DMESG (relevant parts): > sn9c102: V4L2 driver for SN9C10x PC Camera Controllers v1:1.27 > usb 1-1: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x600D) > usb 1-1: PAS106B image sensor detected > PCI: Enabling device 0000:00:11.6 (0000 -> 0001) > ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 201 > usb 1-1: Initialization succeeded > usb 1-1: V4L2 device registered as /dev/video0 > usbcore: registered new driver sn9c102 > usbcore: registered new driver spca5xx > /usr/src/modules/spca5xx/drivers/usb/spca5xx.c: spca5xx driver 00.60.00 > registered > This seems ok. > > LSMOD (relevant bits): > spca5xx 642384 0 > videodev 21120 2 spca5xx,sn9c102 > usbcore 112644 7 > spca5xx,sn9c102,usbhid,usb_storage,ehci_hcd,uhci_hcd > v4l1_compat 12036 1 videodev > v4l2_common 20448 2 sn9c102,videodev > This seems ok too. > > LSUSB: > Bus 005 Device 004: ID 07ab:fcfe Freecom Technologies > Bus 005 Device 001: ID 0000:0000 > Bus 003 Device 001: ID 0000:0000 > Bus 004 Device 001: ID 0000:0000 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 005: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse > Bus 001 Device 004: ID 0c45:600d Microdia > Bus 001 Device 001: ID 0000:0000 > I guess the Microdia entry is the camera. > > Any detectives in the house? > TIA, > Jonathan > > > > ______________________________________________ > LLama Gratis a cualquier PC del Mundo. > Llamadas a fijos y m?viles desde 1 c?ntimo por minuto. > http://es.voice.yahoo.com > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From jdkaye10 at yahoo.es Mon Jul 16 15:29:44 2007 From: jdkaye10 at yahoo.es (Jonathan Kaye) Date: Mon, 16 Jul 2007 17:29:44 +0200 Subject: [Ekiga-list] problem with 120 Spacecam In-Reply-To: <469B8BAC.3050302@ansur.demon.co.uk> References: <469B87DB.3080903@yahoo.es> <469B8BAC.3050302@ansur.demon.co.uk> Message-ID: <469B8EE8.6040105@yahoo.es> David Ford ha escrit el 16/07/07 17:15: > Hi Jonathan > I had a similar problem - stopping modprobe loading both the spca5xx and > sn9c102 modules fixed it for me. The spca5xx worked with everything > where the sn9c102 only half worked with some programs. > David > > Jonathan Kaye wrote: > >> Hi Ekiga-ers, >> This is a real puzzler and a challenge to all. I'm running Ekiga 2.0.3 >> on Debian Lenny with >> a 2.6.18-4-686 kernel. My DM is KDE somewhere between 3.5.5 and 3.5.7 as >> the KDE updates trickle down to testing. I rescued a Trust 120 Spacecam USB >> webcam that my friend was throwing out because he couldn't get it to work >> on windows ;-). I rescued it from the dustbin and found that it worked well >> (it's a cheap camera so "well" means it produced a recognisable image) with >> the spca5xx driver. The driver stopped working when I upgraded my kernel >> and I couldn't find the source code to rebuild it for the new kernel. After >> a few months I noticed that there was a Debian package spca5xx-source and I >> could build the module for my kernel and it worked!!!!!!!! >> >> Thanks for the speedy answer, David. I'm not really sure about the relation between the spca5xx and the sn9c102 modules. Anway, I can give it a try. Is the best way to prevent it from loading to remove sn9c102.ko from the lib/modules/2.6.18-4-686/modules.dep file? Cheers, Jonathan From dford at ansur.demon.co.uk Mon Jul 16 16:16:23 2007 From: dford at ansur.demon.co.uk (David Ford) Date: Mon, 16 Jul 2007 17:16:23 +0100 Subject: [Ekiga-list] problem with 120 Spacecam In-Reply-To: <469B8EE8.6040105@yahoo.es> References: <469B87DB.3080903@yahoo.es> <469B8BAC.3050302@ansur.demon.co.uk> <469B8EE8.6040105@yahoo.es> Message-ID: <469B99D7.6090508@ansur.demon.co.uk> Hi Jonathan I just added it to /etc/hotplug/blacklist - to stop hotplug from using it. I added:- #webcam drivers sn9c102 to the bottom of the list and that seemed to do the job - there are some instructions in the file. David PS In case this works and you begin to think I know what I'm doing - this suggestion originally came from Michel Xhaard ( mxhaard at magic.fr - he wrote the spca module). If you're still having trouble, try mailing him - he was a great help with my problems. Jonathan Kaye wrote: > David Ford ha escrit el 16/07/07 17:15: > >> Hi Jonathan >> I had a similar problem - stopping modprobe loading both the spca5xx and >> sn9c102 modules fixed it for me. The spca5xx worked with everything >> where the sn9c102 only half worked with some programs. >> David >> >> Jonathan Kaye wrote: >> >> >>> Hi Ekiga-ers, >>> This is a real puzzler and a challenge to all. I'm running Ekiga 2.0.3 >>> on Debian Lenny with >>> a 2.6.18-4-686 kernel. My DM is KDE somewhere between 3.5.5 and 3.5.7 as >>> the KDE updates trickle down to testing. I rescued a Trust 120 Spacecam USB >>> webcam that my friend was throwing out because he couldn't get it to work >>> on windows ;-). I rescued it from the dustbin and found that it worked well >>> (it's a cheap camera so "well" means it produced a recognisable image) with >>> the spca5xx driver. The driver stopped working when I upgraded my kernel >>> and I couldn't find the source code to rebuild it for the new kernel. After >>> a few months I noticed that there was a Debian package spca5xx-source and I >>> could build the module for my kernel and it worked!!!!!!!! >>> >>> >>> > > Thanks for the speedy answer, David. I'm not really sure about the > relation between the spca5xx and the sn9c102 modules. Anway, I can give > it a try. Is the best way to prevent it from loading to remove > sn9c102.ko from the lib/modules/2.6.18-4-686/modules.dep file? > Cheers, > Jonathan > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From jdkaye10 at yahoo.es Mon Jul 16 16:53:06 2007 From: jdkaye10 at yahoo.es (Jonathan Kaye) Date: Mon, 16 Jul 2007 18:53:06 +0200 Subject: [Ekiga-list] problem with 120 Spacecam In-Reply-To: <469B99D7.6090508@ansur.demon.co.uk> References: <469B87DB.3080903@yahoo.es> <469B8BAC.3050302@ansur.demon.co.uk> <469B8EE8.6040105@yahoo.es> <469B99D7.6090508@ansur.demon.co.uk> Message-ID: <469BA272.8020607@yahoo.es> David Ford ha escrit el 16/07/07 18:16: > Hi Jonathan > I just added it to /etc/hotplug/blacklist - to stop hotplug from using it. > I added:- > #webcam drivers > sn9c102 > to the bottom of the list and that seemed to do the job - there are some > instructions in the file. > > David > Thanks David, I didn't have a file called "blacklist" in the /etc/hotplug directory but I did have a blacklist.d directory there. Anyway I created the blacklist file as you indicated and we'll see what happens. I'll report back. Cheers, Jonathan From jdkaye10 at yahoo.es Mon Jul 16 17:05:13 2007 From: jdkaye10 at yahoo.es (Jonathan Kaye) Date: Mon, 16 Jul 2007 19:05:13 +0200 Subject: [Ekiga-list] more on 120 spacecam Message-ID: <469BA549.4030707@yahoo.es> Hi David, Nope, that didn't work at all. I added the blacklist file as you suggested and then plugged in the webcam but both modules loaded (according to lsmod). So I manually removed the sn9c102 using modprobe -r and verified that it was gone but spca5xx remained using lsmod. I started Ekiga and it didn't even detect the camera. I reloaded the sn9c102 with modprobe and restarted Ekiga. The good news: Ekiga now saw the camera. The bad news: same as before. The little error window opens saying there's a problem and no image. Oh well. Thanks, Jonathan From mcs1 at ntlworld.com Mon Jul 16 18:57:34 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Mon, 16 Jul 2007 19:57:34 +0100 (BST) Subject: [Ekiga-list] more on 120 spacecam In-Reply-To: <469BA549.4030707@yahoo.es> References: <469BA549.4030707@yahoo.es> Message-ID: <18360202.381184612254423.OPEN-XCHANGE.WebMail.nobody@sam> Hi, The blacklist file should be in /etc/modprobe.d/blacklist Then it prevents teh module from loading on my debian testing /unstable. ? The scaling problem with Logitech messenger I still have not solved, did not get anywhere despite asking for help at the driver developers :) Cheers Michael On Mon 16.07.2007 18:05, Jonathan Kaye wrote: >Hi David, >Nope, that didn't work at all. I added the blacklist file as you >suggested and then plugged in the webcam but both modules loaded >(according to lsmod). So I manually removed the sn9c102 using modprobe >-r and verified that it was gone but spca5xx remained using lsmod. I >started Ekiga and it didn't even detect the camera. > >I reloaded the sn9c102 with modprobe and restarted Ekiga. The good >news: >Ekiga now saw the camera. The bad news: same as before. The little >error >window opens saying there's a problem and no image. Oh well. >Thanks, >Jonathan > > >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From jdkaye10 at yahoo.es Mon Jul 16 19:21:25 2007 From: jdkaye10 at yahoo.es (Jonathan Kaye) Date: Mon, 16 Jul 2007 21:21:25 +0200 Subject: [Ekiga-list] more on 120 spacecam In-Reply-To: <18360202.381184612254423.OPEN-XCHANGE.WebMail.nobody@sam> References: <469BA549.4030707@yahoo.es> <18360202.381184612254423.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <469BC535.3050807@yahoo.es> Michael Stockenhuber ha escrit el 16/07/07 20:57: > Hi, > > The blacklist file should be in > /etc/modprobe.d/blacklist > Then it prevents teh module from loading on my debian testing /unstable. > > The scaling problem with Logitech messenger I still have not solved, did > not get anywhere despite asking for help at the driver developers :) > Cheers > Michael > > > On Mon 16.07.2007 18:05, Jonathan Kaye wrote: > Thanks for that Michael. I had seen that. It's part of udev. But after I manually unloaded the sn9c102 module and things got worse I thought that this isn't the way to go. In any event, when the camera is identified by the software is is always identified as a sn9c102 camera and never as an spca5xx one. I've written to Michel, as David suggested, to see if he has any ideas on the matter. The funny thing is I'm also running Debian Etch (but with the same kernel) on an old IBM Thinkpad. It only has one usb port but I built the spca5xx module exactly the same way and didn't blacklist anything. Of course the very same webcam works fine on the laptop. Webcams seem to be a black art. Thanks again, Jonathan From dford at ansur.demon.co.uk Mon Jul 16 20:46:39 2007 From: dford at ansur.demon.co.uk (David Ford) Date: Mon, 16 Jul 2007 21:46:39 +0100 Subject: [Ekiga-list] more on 120 spacecam In-Reply-To: <469BA549.4030707@yahoo.es> References: <469BA549.4030707@yahoo.es> Message-ID: <469BD92F.4060506@ansur.demon.co.uk> Hi Jonathan Jonathan Kaye wrote: > Hi David, > Nope, that didn't work at all. I added the blacklist file as you > suggested and then plugged in the webcam but both modules loaded > (according to lsmod). So I manually removed the sn9c102 using modprobe > -r and verified that it was gone but spca5xx remained using lsmod. I > started Ekiga and it didn't even detect the camera. > Rats! With no camera plugged in there should be no module loaded - when you plug the camera in only one module should load. If you remove the module that hotplug bound the camera to then I don't think the camera will bind to the other module until you plug it out and plug it in again - this will, of course, load sn9c102 . . . There has to be a way to stop that module loading. > I reloaded the sn9c102 with modprobe and restarted Ekiga. The good news: > Ekiga now saw the camera. The bad news: same as before. The little error > window opens saying there's a problem and no image. Oh well. > This is exactly the problem that blacklisting the sn9c102 driver fixed for me. - Maybe there's something wrong with the syntax I gave you for the blacklist file. - By the way, I'm still using Fedora Core 3, so things have probably moved on by now - it might be worth doing a 'man hotplug' and see if there's any details of blacklists there. 'udev' seems to be the way things are going - perhaps you need to see if there's a blacklist for udev? David > Thanks, > Jonathan > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From cam at ellisonpsychology.ca Mon Jul 16 21:07:09 2007 From: cam at ellisonpsychology.ca (Cam Ellison) Date: Mon, 16 Jul 2007 14:07:09 -0700 Subject: [Ekiga-list] more on 120 spacecam In-Reply-To: <469BD92F.4060506@ansur.demon.co.uk> References: <469BA549.4030707@yahoo.es> <469BD92F.4060506@ansur.demon.co.uk> Message-ID: <469BDDFD.3000602@ellisonpsychology.ca> David Ford wrote: > Hi Jonathan > Jonathan Kaye wrote: >> Hi David, >> Nope, that didn't work at all. I added the blacklist file as you >> suggested and then plugged in the webcam but both modules loaded >> (according to lsmod). So I manually removed the sn9c102 using modprobe >> -r and verified that it was gone but spca5xx remained using lsmod. I >> started Ekiga and it didn't even detect the camera. >> > Rats! > I run Debian lenny/sid. In /etc/hotplug/blacklist.d/ there are files listing the modules that someone might not want loaded. Since this is a usb camera, that's probably where you want to put the file. The blacklist file in /etc/modprobe.d/ speaks of aliases, and though I'm hardly an expert, that seems to imply that you need to also put the two modules into that list. There should already be a file: /etc/modprobe.d/blacklist. I think you need to look in both places. You might also look in the other files in /etc/modprobe.d/, since they will tell you what modules do get loaded, and under what aliases. HTH Cam -- Cam Ellison, Ph.D. R.Psych. #1417 Cam Ellison & Associates Ltd. 3446 Beach Avenue Roberts Creek BC V0N 2W2 Phone: 604-885-4806 Fax: 604-885-4809 From jdkaye10 at yahoo.es Tue Jul 17 12:46:58 2007 From: jdkaye10 at yahoo.es (Jonathan Kaye) Date: Tue, 17 Jul 2007 14:46:58 +0200 Subject: [Ekiga-list] [Solved!] 120 spacecam Message-ID: <469CBA42.2050705@yahoo.es> Hi all, Thanks to David and Cam for their help. The problem was progress. As indicated in the dmesg extracts my webcam is now v4L2 instead of v4L. I'm sure this is a new thing. The proof is that when I first configured Ekiga it was listed as v4L. I went through the setup druid again and noticed that there is now a choice (before there wasn't) between v4L and v4L2. I selected v4l2 and then suddenly it recognised the camera as an sn9c10x PC camera. It looks like the modules weren't the culprits afterall. I'm sad that the webcam light now remains on whether or not the cam is in use. Surely this is a step backwards. Thanks again for all the support from this list. Cheers, Jonathan From geek.arnuld at gmail.com Tue Jul 17 14:45:35 2007 From: geek.arnuld at gmail.com (arnuld) Date: Tue, 17 Jul 2007 20:15:35 +0530 Subject: [Ekiga-list] Error: User Offline, even when the user is online Message-ID: my friend used Ekiga on Windows and i have Arch GNU/Linux. i can make a call to 500, test my voice ..fine.. ok i can receive his text-messages but when i send him a message i get this error: User offline what could be the trouble ? (IIRC, he has not installed GTK+) -- http://arnuld.blogspot.com/ From jan.schampera at web.de Tue Jul 17 15:31:06 2007 From: jan.schampera at web.de (Jan Schampera) Date: Tue, 17 Jul 2007 17:31:06 +0200 Subject: [Ekiga-list] Error: User Offline, even when the user is online In-Reply-To: References: Message-ID: <20070717173106.4c7e2993@mainserver.home.thebonsai.de> On Tue, 17 Jul 2007 20:15:35 +0530 arnuld wrote: > my friend used Ekiga on Windows and i have Arch GNU/Linux. i can make > a call to 500, test my voice ..fine.. ok > > i can receive his text-messages but when i send him a message i get > this error: User offline > > > what could be the trouble ? (IIRC, he has not installed GTK+) > Network reachability maybe (firewall/STUN setup/...)? J. From sevmek at free.fr Tue Jul 17 15:49:41 2007 From: sevmek at free.fr (yannick) Date: Tue, 17 Jul 2007 17:49:41 +0200 Subject: [Ekiga-list] Error: User Offline, even when the user is online In-Reply-To: References: Message-ID: <1184687381.6795.118.camel@achille> Le mardi 17 juillet 2007 ? 20:15 +0530, arnuld a ?crit : > my friend used Ekiga on Windows and i have Arch GNU/Linux. i can make > a call to 500, test my voice ..fine.. ok > > i can receive his text-messages but when i send him a message i get > this error: User offline > > > what could be the trouble ? (IIRC, he has not installed GTK+) > Is he registered to ekiga.net using his Ekiga ? Regards, Yannick > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From geek.arnuld at gmail.com Tue Jul 17 16:29:50 2007 From: geek.arnuld at gmail.com (arnuld) Date: Tue, 17 Jul 2007 21:59:50 +0530 Subject: [Ekiga-list] Error: User Offline, even when the user is online In-Reply-To: <1184687381.6795.118.camel@achille> References: <1184687381.6795.118.camel@achille> Message-ID: > On 7/17/07, yannick wrote: > Is he registered to ekiga.net using his Ekiga ? yes, that was the trouble. he registered using Ekiga and account was not created but he was able to send me text-messages. now that fool, my friend, Windows user, after my advice, registered at www.ekiga.net and every thing is ok now thanks to all of you BTW -- http://arnuld.blogspot.com/ From ethy.brito at inexo.com.br Wed Jul 11 13:55:14 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Wed, 11 Jul 2007 10:55:14 -0300 Subject: [Ekiga-list] no audio xmit Message-ID: <20070711105514.43122781@babalu.inexo.com.br> Hi Ekiga can't xmit any audio. I can register, place a call, I hear what my partner say but I got this window: ------------------------------------------------------------ Could not open audio channel for audio transmission An error occured while trying to record from the soundcard for the audio transmission. Please check that your soundcard is not busy and that your driver supports full-duplex. The audio transmission has been disabled. ----------------------------------------------------------- I used strace to find out what device is ekiga opening but its output is way too long and of no help. I have xten for Windows in this same machine running under VMWARE and it can place a call without any trouble. My audio card is a NVidia NForce 3. Any help will be appreciated. Thanx Ethy From ethy.brito at inexo.com.br Thu Jul 12 14:29:49 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Thu, 12 Jul 2007 11:29:49 -0300 Subject: [Ekiga-list] no audio xmit In-Reply-To: <4695C3D3.5000500@free.fr> References: <20070711105514.43122781@babalu.inexo.com.br> <4695C3D3.5000500@free.fr> Message-ID: <20070712112949.100b3b69@babalu.inexo.com.br> On Thu, 12 Jul 2007 08:01:55 +0200 Julien Puydt wrote: > > There is an audio test in the druid : does it succeed? My guess is that > it doesn't. Yes there is an audio test. And no, It doesn't succeed. I click on it and get: ---------------------------------------------------------------------- Failed to open the device Impossible to open the selected audio device (Default) for recording. Please check your audio setup, the permissions and that the device is not busy. --------------------------------------------------------------------- But, as a Linux application, it could at least give a little more useful message. What audio device is it trying to open??? /dev/WHAT??? "Default" is meaningless. At least for me. As I said in other email, XTEN (for linux) works flawlessly. It uses /dev/dsp. > Are you using the ALSA plugin or the OSS plugin? There is no OSS plugin option. Just ALSA. Thanx for you help so far. Regards Ethy From ethy.brito at inexo.com.br Tue Jul 10 21:30:55 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Tue, 10 Jul 2007 18:30:55 -0300 Subject: [Ekiga-list] pointer to gconf problems Message-ID: <20070710183055.252d9676@babalu.inexo.com.br> Hi When I start ekiga it complains it got a invalid GCONF value for the /apps/ekiga/general/gconf_test_age key. I followed the instructions I found at FAQ with no results. I am using Slackeware 10.2 and ekiga 2.0.9 (compiled from source) Anybody could point me some other info on how to fix this? Regards Ethy From jpuydt at free.fr Wed Jul 18 06:09:24 2007 From: jpuydt at free.fr (Julien Puydt) Date: Wed, 18 Jul 2007 08:09:24 +0200 Subject: [Ekiga-list] no audio xmit In-Reply-To: <20070712112949.100b3b69@babalu.inexo.com.br> References: <20070711105514.43122781@babalu.inexo.com.br> <4695C3D3.5000500@free.fr> <20070712112949.100b3b69@babalu.inexo.com.br> Message-ID: <469DAE94.3040702@free.fr> Ethy H. Brito a ?crit : > Yes there is an audio test. And no, It doesn't succeed. Then your audio setup isn't in a usable state. > But, as a Linux application, it could at least give a little more useful > message. It tries to open "Default" and that fails. There's nothing more to be said because it doesn't know more about it. > What audio device is it trying to open??? /dev/WHAT??? > "Default" is meaningless. At least for me. "Default" has a meaning for alsa. Using the alsa plugin, we don't know the /dev/WHAT, we know it's "Default". > As I said in other email, XTEN (for linux) works flawlessly. It > uses /dev/dsp. This is OSS, while you use ALSA. >> Are you using the ALSA plugin or the OSS plugin? > > There is no OSS plugin option. Just ALSA. You can try to install the OSS plugin (ptlib-oss or something like this) then. Or you can have a look at http://wiki.ekiga.org : there is a trouble-shooting section there. Snark on #ekiga From jpuydt at free.fr Wed Jul 18 06:11:17 2007 From: jpuydt at free.fr (Julien Puydt) Date: Wed, 18 Jul 2007 08:11:17 +0200 Subject: [Ekiga-list] pointer to gconf problems In-Reply-To: <20070710183055.252d9676@babalu.inexo.com.br> References: <20070710183055.252d9676@babalu.inexo.com.br> Message-ID: <469DAF05.9000308@free.fr> Ethy H. Brito a ?crit : > When I start ekiga it complains it got a invalid > GCONF value for the /apps/ekiga/general/gconf_test_age key. > > I followed the instructions I found at FAQ with no results. > > I am using Slackeware 10.2 and ekiga 2.0.9 (compiled from source) > > Anybody could point me some other info on how to fix this? If the instructions of the faq don't work... may I ask which options you used to compile ekiga -- the ./configure line especially? Snark on #ekiga From jpuydt at free.fr Wed Jul 18 06:14:21 2007 From: jpuydt at free.fr (Julien Puydt) Date: Wed, 18 Jul 2007 08:14:21 +0200 Subject: [Ekiga-list] pointer to gconf problems In-Reply-To: <469DAF05.9000308@free.fr> References: <20070710183055.252d9676@babalu.inexo.com.br> <469DAF05.9000308@free.fr> Message-ID: <469DAFBD.7020304@free.fr> Julien Puydt a ?crit : > Ethy H. Brito a ?crit : >> When I start ekiga it complains it got a invalid >> GCONF value for the /apps/ekiga/general/gconf_test_age key. >> >> I followed the instructions I found at FAQ with no results. >> >> I am using Slackeware 10.2 and ekiga 2.0.9 (compiled from source) >> >> Anybody could point me some other info on how to fix this? > > If the instructions of the faq don't work... may I ask which options you > used to compile ekiga -- the ./configure line especially? Sorry, my mailer marked your first message unread, and I didn't see the other messages... Snark on #ekiga From ethy.brito at inexo.com.br Wed Jul 18 12:55:59 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Wed, 18 Jul 2007 09:55:59 -0300 Subject: [Ekiga-list] no audio xmit In-Reply-To: <469DAE94.3040702@free.fr> References: <20070711105514.43122781@babalu.inexo.com.br> <4695C3D3.5000500@free.fr> <20070712112949.100b3b69@babalu.inexo.com.br> <469DAE94.3040702@free.fr> Message-ID: <20070718095559.5dbf64bd@babalu.inexo.com.br> On Wed, 18 Jul 2007 08:09:24 +0200 Julien Puydt wrote: > Ethy H. Brito a ?crit : > > Yes there is an audio test. And no, It doesn't succeed. > > Then your audio setup isn't in a usable state. This is for sure! > > > But, as a Linux application, it could at least give a little more useful > > message. > > It tries to open "Default" and that fails. There's nothing more to be > said because it doesn't know more about it. nothing against it but that is the problem with layered applications. No Flames Please. Just a thought. > > > What audio device is it trying to open??? /dev/WHAT??? > > "Default" is meaningless. At least for me. I managed to find the final device ALSA is trying to use. I found that my udevd (I think) created some /dev/snd devices with 664 permissions. Particularly pcmC0D0c. I changed it to 666 and ekiga is sending out audio. The problem is every time I boot I have to change it manually. I'll search some udevd docs and see how to fix this. I am pretty convinced it is a Slackware 10.2 config thing. Regards Ethy From ethy.brito at inexo.com.br Wed Jul 18 13:03:16 2007 From: ethy.brito at inexo.com.br (Ethy H. Brito) Date: Wed, 18 Jul 2007 10:03:16 -0300 Subject: [Ekiga-list] pointer to gconf problems In-Reply-To: <469DAF05.9000308@free.fr> References: <20070710183055.252d9676@babalu.inexo.com.br> <469DAF05.9000308@free.fr> Message-ID: <20070718100316.5e6024dd@babalu.inexo.com.br> On Wed, 18 Jul 2007 08:11:17 +0200 Julien Puydt wrote: > Ethy H. Brito a ?crit : > > When I start ekiga it complains it got a invalid > > GCONF value for the /apps/ekiga/general/gconf_test_age key. > > > > I followed the instructions I found at FAQ with no results. > > > > I am using Slackeware 10.2 and ekiga 2.0.9 (compiled from source) > > > > Anybody could point me some other info on how to fix this? > > If the instructions of the faq don't work... may I ask which options you > used to compile ekiga -- the ./configure line especially? Ok. My fault. My MUA resent some old messages. But replying again to an already solved problem: I have this inside my /etc/gconf/schemas/ekiga.schemas Apparently my gconf did not like this line break. I joined these two lines and ekiga is running smooth. Further researching I also found that this "error" is coming from ekiga.schemas.in inside the tarball that has these two lines splited. Regards Ethy From rafael.ernits at gmail.com Thu Jul 19 21:37:48 2007 From: rafael.ernits at gmail.com (Rafael Ernits) Date: Thu, 19 Jul 2007 23:37:48 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication Message-ID: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> Hi all, I facing problems with the configuration of my ekiga, . i couldn't connect to remote host . and my registration failed What was already made: . an account was created . configuration procedures were followed using the configuration druid, Questions: . how can i test if ekiga can access the internet? (i use a connection with proxy and authentication). And if it can't, could anyone give me a suggestion to fix it? thank for your attention, and sorry for questioning such a basic thing, Rafael -------------- next part -------------- An HTML attachment was scrubbed... URL: From rmohan43 at gmail.com Fri Jul 20 07:44:53 2007 From: rmohan43 at gmail.com (Raj Mohan Kovilath) Date: Fri, 20 Jul 2007 13:14:53 +0530 Subject: [Ekiga-list] Failed to authenticate Message-ID: <34dea8b10707200044p29c489e4y361962784bc855f0@mail.gmail.com> Hello, I have setup a SIP account with Ekiga. I am able to login to ekiga.net from the Web interface using my username/password. But when I try to do the echo test sip:500 at ekiga.net I get the following error: "Failed to authenticate on INVITE to '"Raj Mohan" ;tag=as29ab5b95' -- SIP/ekiga.net-084da130 is circuit-busy". I am routing the SIP traffic through our Asterisk server. I have configured sip.conf with my Ekiga username and password. What could be going wrong here ? Thanks, Raj Mohan -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Fri Jul 20 09:29:29 2007 From: sevmek at free.fr (yannick) Date: Fri, 20 Jul 2007 11:29:29 +0200 Subject: [Ekiga-list] Failed to authenticate In-Reply-To: <34dea8b10707200044p29c489e4y361962784bc855f0@mail.gmail.com> References: <34dea8b10707200044p29c489e4y361962784bc855f0@mail.gmail.com> Message-ID: <1184923769.6311.47.camel@achille> Le vendredi 20 juillet 2007 ? 13:14 +0530, Raj Mohan Kovilath a ?crit : > Hello, > I have setup a SIP account with Ekiga. I am able to login to ekiga.net > from the Web interface using my username/password. > But when I try to do the echo test sip:500 at ekiga.net I get the > following error: > > "Failed to authenticate on INVITE to '"Raj Mohan" > ;tag=as29ab5b95' > -- SIP/ekiga.net-084da130 is circuit-busy". > > I am routing the SIP traffic through our Asterisk server. I have > configured sip.conf with my Ekiga username and password. > What could be going wrong here ? > We usually recommend this setup for Asterisk: http://wiki.ekiga.org/index.php/Ekiga_as_an_Asterisk_client http://wiki.ekiga.org/index.php/Connecting_Asterisk_to_ekiga.net I hope this would help. Regards, Yannick > Thanks, > Raj Mohan > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From lists at dcorking.com Sat Jul 21 01:04:11 2007 From: lists at dcorking.com (David Corking) Date: Sat, 21 Jul 2007 02:04:11 +0100 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> Message-ID: On 7/19/07, Rafael wrote: > I facing problems with the configuration of my ekiga, > > . i couldn't connect to remote host > . and my registration failed > > What was already made: > > . an account was created > . configuration procedures were followed using the configuration druid, > > Questions: > > . how can i test if ekiga can access the internet? (i use a connection with > proxy and authentication). Do you mean a SIP proxy? Then if ekiga connects to the internet, you will see at least 1 account registered at the bottom of the main window. Or an http/ftp proxy and authentication? > And if it can't, could anyone give me a > suggestion to fix it? If the only way to the internet is via an http/ftp proxy then you can't fix it. Ekiga can only punch through NAT firewalls, or firewalls with explicit SIP support. You will need to politely ask your firewall administrator to open the ports for you as described in the wiki. -- David From wlaoye at yahoo.com Sat Jul 21 08:22:06 2007 From: wlaoye at yahoo.com (w laoye) Date: Sat, 21 Jul 2007 01:22:06 -0700 (PDT) Subject: [Ekiga-list] video test Message-ID: <48147.48709.qm@web62106.mail.re1.yahoo.com> How to do a video test with 500 at ekiga.net? I choose View->Both(Side-by-Side), I get both views from my camera. ____________________________________________________________________________________ Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. http://new.toolbar.yahoo.com/toolbar/features/mail/index.php From jpuydt at free.fr Sat Jul 21 08:56:18 2007 From: jpuydt at free.fr (Julien Puydt) Date: Sat, 21 Jul 2007 10:56:18 +0200 Subject: [Ekiga-list] video test In-Reply-To: <48147.48709.qm@web62106.mail.re1.yahoo.com> References: <48147.48709.qm@web62106.mail.re1.yahoo.com> Message-ID: <46A1CA32.5080606@free.fr> w laoye a ?crit : > How to do a video test with 500 at ekiga.net? I choose > View->Both(Side-by-Side), > I get both views from my camera. It's normal : 500 at ekiga.net sends back your video Snark on #ekiga From rmohan43 at gmail.com Sat Jul 21 10:15:51 2007 From: rmohan43 at gmail.com (Raj Mohan Kovilath) Date: Sat, 21 Jul 2007 15:45:51 +0530 Subject: [Ekiga-list] Failed to authenticate In-Reply-To: <1184923769.6311.47.camel@achille> References: <34dea8b10707200044p29c489e4y361962784bc855f0@mail.gmail.com> <1184923769.6311.47.camel@achille> Message-ID: <34dea8b10707210315w29beb5c6ta1b0840672168813@mail.gmail.com> I tried the recommendations for Asterisk-Ekiga connectivity in the link provided. But I still get the same error. Also when I try to register Asterisk with ekiga.net I get the following error: Registration for 'space at ekiga.net' timed out, trying again (Attempt #1) -- Got SIP response 406 "Not Acceptable" back from 86.64.162.35 The relevant lines from my sip.conf are here: register => space:space123 at ekiga.net ;Ekiga softphone - outgoing to ekiga.net. [space] type=friend username=space authname=space secret=space123 nat=no ; This phone is not natted host=ekiga.net insecure=port,invite canreinvite=no context=default qualify=300 Help solicited. Thanks, Raj Mohan On 7/20/07, yannick wrote: > > Le vendredi 20 juillet 2007 ? 13:14 +0530, Raj Mohan Kovilath a ?crit : > > Hello, > > I have setup a SIP account with Ekiga. I am able to login to ekiga.net > > from the Web interface using my username/password. > > But when I try to do the echo test sip:500 at ekiga.net I get the > > following error: > > > > "Failed to authenticate on INVITE to '"Raj Mohan" > > ;tag=as29ab5b95' > > -- SIP/ekiga.net-084da130 is circuit-busy". > > > > I am routing the SIP traffic through our Asterisk server. I have > > configured sip.conf with my Ekiga username and password. > > What could be going wrong here ? > > > > We usually recommend this setup for Asterisk: > http://wiki.ekiga.org/index.php/Ekiga_as_an_Asterisk_client > http://wiki.ekiga.org/index.php/Connecting_Asterisk_to_ekiga.net > I hope this would help. > > Regards, > Yannick > > Thanks, > > Raj Mohan > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Raj Mohan Society for Promotion of Alternative Computing and Employment C-11 Elankom Gardens Vellayambalam Thiruvananthapuram 695010 -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Sat Jul 21 11:58:00 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Sat, 21 Jul 2007 13:58:00 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> Message-ID: 2007/7/21, David Corking : > > > Questions: > > > > . how can i test if ekiga can access the internet? (i use a connection > with > > proxy and authentication). > > Or an http/ftp proxy and authentication? Indeed Ekiga cannot use http proxy to register with the SIP proxy , and even if it does you would not be able to put your call ... The best way to ba able to use SIP with a http proxy is to use wengophone with a wengo account, they have an http server in Paris to tunnel your SIP traffic. if you are on Windows there is also the real tunnel solution which would work with ekiga. Maybe Ekiga druid should tell somthing about the http proxy case . -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 Mobile : 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From lists at dcorking.com Sat Jul 21 13:14:38 2007 From: lists at dcorking.com (David Corking) Date: Sat, 21 Jul 2007 14:14:38 +0100 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> Message-ID: On 7/21/07, michel memeteau > The best way to ba able to use SIP with a http proxy is to use wengophone > with a wengo account, they have an http server in Paris to tunnel your SIP > traffic. if you are on Windows there is also the real tunnel solution which > would work with ekiga. > > Maybe Ekiga druid should tell somthing about the http proxy case . > That sounds nice. How could the druid test for an http proxy? -- David From lists at dcorking.com Sat Jul 21 13:29:18 2007 From: lists at dcorking.com (David Corking) Date: Sat, 21 Jul 2007 14:29:18 +0100 Subject: [Ekiga-list] Failed to authenticate In-Reply-To: <34dea8b10707210315w29beb5c6ta1b0840672168813@mail.gmail.com> References: <34dea8b10707200044p29c489e4y361962784bc855f0@mail.gmail.com> <1184923769.6311.47.camel@achille> <34dea8b10707210315w29beb5c6ta1b0840672168813@mail.gmail.com> Message-ID: On 7/21/07, Raj Mohan Kovilath > Also when I try to register Asterisk with ekiga.net I get the following > error: > > Registration for 'space at ekiga.net' timed out, trying again (Attempt #1) > -- Got SIP response 406 "Not Acceptable" back from 86.64.162.35 This is an Asterisk question not an ekiga one. Have you configured Asterisk to register to a SIP server (ekiga.net runs SER, if I recall correctly) not an AIX one? If you are not sure how to fix Asterisk, a useful next step will be to test Ekiga directly with a SIP server (that will rule out ekiga and ekiga.net, and tell you if there is a problem with routing.) Best, David From michel.memeteau at gmail.com Sat Jul 21 13:51:58 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Sat, 21 Jul 2007 15:51:58 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> Message-ID: 2007/7/21, David Corking : > > > How could the druid test for an http proxy? If averything is blocked , test the http_proxy on linux , or IE settings ( wengo does it ) on Windows . But it won't be able to do something else after that ..... It was already asked to see if the ekiga.net server could handle a http tunnel server ? -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 Mobile : 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sat Jul 21 14:04:57 2007 From: sevmek at free.fr (yannick) Date: Sat, 21 Jul 2007 16:04:57 +0200 Subject: [Ekiga-list] Failed to authenticate In-Reply-To: <34dea8b10707210315w29beb5c6ta1b0840672168813@mail.gmail.com> References: <34dea8b10707200044p29c489e4y361962784bc855f0@mail.gmail.com> <1184923769.6311.47.camel@achille> <34dea8b10707210315w29beb5c6ta1b0840672168813@mail.gmail.com> Message-ID: <1185026697.13693.2.camel@achille> Le samedi 21 juillet 2007 ? 15:45 +0530, Raj Mohan Kovilath a ?crit : > I tried the recommendations for Asterisk-Ekiga connectivity in the > link provided. > But I still get the same error. > Also when I try to register Asterisk with ekiga.net I get the > following error: > > Registration for 'space at ekiga.net' timed out, trying again (Attempt > #1) > -- Got SIP response 406 "Not Acceptable" back from 86.64.162.35 > > The relevant lines from my sip.conf are here: > > register => space:space123 at ekiga.net register => YOUR_EKIGA_NAME:YOUR_EKIGA_PASSWORD at ekiga.net/101 Why 101 ? because of this: http://wiki.ekiga.org/index.php/Ekiga_as_an_Asterisk_client Did you make Ekiga a client of your Asterisk ? In the configuration exemple Ekiga has the name 101, which you find in the end or the line above. Regards, Yannick > > ;Ekiga softphone - outgoing to ekiga.net. > [space] > type=friend > username=space > authname=space > secret=space123 > nat=no ; This phone is not natted > host=ekiga.net > insecure=port,invite > canreinvite=no > context=default > qualify=300 > > Help solicited. > > Thanks, > Raj Mohan > > > > On 7/20/07, yannick wrote: > Le vendredi 20 juillet 2007 ? 13:14 +0530, Raj Mohan Kovilath > a ?crit : > > Hello, > > I have setup a SIP account with Ekiga. I am able to login to > ekiga.net > > from the Web interface using my username/password. > > But when I try to do the echo test sip:500 at ekiga.net I get > the > > following error: > > > > "Failed to authenticate on INVITE to '"Raj Mohan" > > ;tag=as29ab5b95' > > -- SIP/ekiga.net-084da130 is circuit-busy". > > > > I am routing the SIP traffic through our Asterisk server. I > have > > configured sip.conf with my Ekiga username and password. > > What could be going wrong here ? > > > > We usually recommend this setup for Asterisk: > http://wiki.ekiga.org/index.php/Ekiga_as_an_Asterisk_client > http://wiki.ekiga.org/index.php/Connecting_Asterisk_to_ekiga.net > I hope this would help. > > Regards, > Yannick > > Thanks, > > Raj Mohan > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > -- > Raj Mohan > Society for Promotion of Alternative Computing and Employment > C-11 Elankom Gardens > Vellayambalam > Thiruvananthapuram 695010 > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From vincent_luba at colombus.org Sat Jul 21 16:07:55 2007 From: vincent_luba at colombus.org (Vincent Luba) Date: Sat, 21 Jul 2007 18:07:55 +0200 Subject: [Ekiga-list] Failed to authenticate In-Reply-To: <34dea8b10707210315w29beb5c6ta1b0840672168813@mail.gmail.com> References: <34dea8b10707200044p29c489e4y361962784bc855f0@mail.gmail.com> <1184923769.6311.47.camel@achille> <34dea8b10707210315w29beb5c6ta1b0840672168813@mail.gmail.com> Message-ID: <46A22F5B.4020809@colombus.org> Raj Mohan Kovilath a ?crit : > I tried the recommendations for Asterisk-Ekiga connectivity in the > link provided. > But I still get the same error. > Also when I try to register Asterisk with ekiga.net > I get the following error: > > Registration for 'space at ekiga.net ' timed out, > trying again (Attempt #1) > -- Got SIP response 406 "Not Acceptable" back from 86.64.162.35 > > I guess your asterisk box is behind a NAT and you do not provide to ekiga.net your public IP address. Check your asterisk's NAT configuration. Vincent -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sat Jul 21 14:25:53 2007 From: sevmek at free.fr (yannick) Date: Sat, 21 Jul 2007 16:25:53 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> Message-ID: <1185027953.13693.17.camel@achille> Le samedi 21 juillet 2007 ? 15:51 +0200, michel memeteau a ?crit : > It was already asked to see if the ekiga.net server could handle a > http tunnel server ? Well, as far as I know about this, this is technically a bad choice for VoIP as it use TCP for transmitting datas. Theoretically speaking, unlike UDP, the TCP module at the far end sends back an acknowledgement for packets which have been successfully received; a timer at the sending TCP will cause a timeout if an acknowledgement is not received within a reasonable round-trip time (or RTT), and the (presumably) lost data will then be re-transmitted. Thus this will increase delay in the transmission as each packet will wait for the acknowledgement. What will happen if one packet is lost ? Does wengo workaround this in some way ? I wonder how well the http tunnel works for wengo. Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From michel.memeteau at gmail.com Sat Jul 21 14:31:40 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Sat, 21 Jul 2007 16:31:40 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: <1185027953.13693.17.camel@achille> References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> <1185027953.13693.17.camel@achille> Message-ID: 2007/7/21, yannick : > > > Well, as far as I know about this, this is technically a bad choice for > VoIP as it use TCP for transmitting datas. Theoretically speaking, > unlike UDP, the TCP module at the far end sends back an acknowledgement > for packets which have been successfully received; a timer at the > sending TCP will cause a timeout if an acknowledgement is not received > within a reasonable round-trip time (or RTT), and the (presumably) lost > data will then be re-transmitted. > > Thus this will increase delay in the transmission as each packet will > wait for the acknowledgement. What will happen if one packet is lost ? > Does wengo workaround this in some way ? > > I wonder how well the http tunnel works for wengo. It works Well , and you can even call any sip adress since wengo 2.0, I understand what you meant about tcp , but microsoft use sip messaging over TCP and it works well for exemple. the http tunnel solution is still the only one for http proxy. it's also what google use for google talk. the point is that wengo http tunnel serve ris not open source I think. -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 Mobile : 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sat Jul 21 15:47:32 2007 From: sevmek at free.fr (yannick) Date: Sat, 21 Jul 2007 17:47:32 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> <1185027953.13693.17.camel@achille> Message-ID: <1185032852.13693.22.camel@achille> Le samedi 21 juillet 2007 ? 16:31 +0200, michel memeteau a ?crit : > > > 2007/7/21, yannick : > > Well, as far as I know about this, this is technically a bad > choice for > VoIP as it use TCP for transmitting datas. Theoretically > speaking, > unlike UDP, the TCP module at the far end sends back an > acknowledgement > for packets which have been successfully received; a timer at > the > sending TCP will cause a timeout if an acknowledgement is not > received > within a reasonable round-trip time (or RTT), and the > (presumably) lost > data will then be re-transmitted. > > Thus this will increase delay in the transmission as each > packet will > wait for the acknowledgement. What will happen if one packet > is lost ? > Does wengo workaround this in some way ? > > I wonder how well the http tunnel works for wengo. > > It works Well , and you can even call any sip adress since wengo 2.0, > I understand what you meant about tcp , but microsoft use sip > messaging over TCP and it works well for exemple. the http tunnel > solution is still the only one for http proxy. it's also what google > use for google talk. the point is that wengo http tunnel serve ris not > open source I think. > As far as I understand this technique, it needs a relay server. I highly doubt Ekiga can have the necessary ressource to setup such server. Beside that, it seems they also workaround the TCP protocol using some optimisation. The real problem is NAT has no standard. This leads to this bad situation as described here : http://www.brynosaurus.com/pub/net/p2pnat/ (I've not finished the reading yet, but this is very interesting to understand the problem IMHO). The good news is the IETF is working on this issue : http://www.ietf.org/html.charters/behave-charter.html But this is still a draft :( This will surely improve. But as now we are stuck... Regards, Yannick > > > > > -- > %<------------------------------------------------------->% > Michel memeteau > VOIP | Visio: sip:freechelmi at gizmoproject.com > Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 > Mobile : 0624808051 > jabber/GoogleTalk : freechelmi at jabber.fr > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From michel.memeteau at gmail.com Sat Jul 21 17:33:23 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Sat, 21 Jul 2007 19:33:23 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: <1185032852.13693.22.camel@achille> References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> <1185027953.13693.17.camel@achille> <1185032852.13693.22.camel@achille> Message-ID: MBDSYS has an openwource implementation of a server compatible with openwengo tunneling protocol http://www.mbdsys.fr/opensource/htproxy/ hhtp headers are modified to specify the udp destination. we maybe could give a try ? I guess this only could be used on the ekiga platform by few people , but as the ekiga.net platform is hosted by 9T I guess bandwidth is not a problem ? 2007/7/21, yannick : > > Le samedi 21 juillet 2007 ? 16:31 +0200, michel memeteau a ?crit : > > > > > > 2007/7/21, yannick : > > > > Well, as far as I know about this, this is technically a bad > > choice for > > VoIP as it use TCP for transmitting datas. Theoretically > > speaking, > > unlike UDP, the TCP module at the far end sends back an > > acknowledgement > > for packets which have been successfully received; a timer at > > the > > sending TCP will cause a timeout if an acknowledgement is not > > received > > within a reasonable round-trip time (or RTT), and the > > (presumably) lost > > data will then be re-transmitted. > > > > Thus this will increase delay in the transmission as each > > packet will > > wait for the acknowledgement. What will happen if one packet > > is lost ? > > Does wengo workaround this in some way ? > > > > I wonder how well the http tunnel works for wengo. > > > > It works Well , and you can even call any sip adress since wengo 2.0, > > I understand what you meant about tcp , but microsoft use sip > > messaging over TCP and it works well for exemple. the http tunnel > > solution is still the only one for http proxy. it's also what google > > use for google talk. the point is that wengo http tunnel serve ris not > > open source I think. > > > > As far as I understand this technique, it needs a relay server. I highly > doubt Ekiga can have the necessary ressource to setup such server. > Beside that, it seems they also workaround the TCP protocol using some > optimisation. > > The real problem is NAT has no standard. This leads to this bad > situation as described here : > http://www.brynosaurus.com/pub/net/p2pnat/ > (I've not finished the reading yet, but this is very interesting to > understand the problem IMHO). > The good news is the IETF is working on this issue : > http://www.ietf.org/html.charters/behave-charter.html > But this is still a draft :( > > This will surely improve. But as now we are stuck... > > Regards, > Yannick > > > > > > > > > > > -- > > %<------------------------------------------------------->% > > Michel memeteau > > VOIP | Visio: sip:freechelmi at gizmoproject.com > > Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 > > Mobile : 0624808051 > > jabber/GoogleTalk : freechelmi at jabber.fr > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > Logiciel de VoIP Ekiga : http://www.ekiga.org > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 Mobile : 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From rafael.ernits at gmail.com Sat Jul 21 18:27:33 2007 From: rafael.ernits at gmail.com (Rafael Ernits) Date: Sat, 21 Jul 2007 20:27:33 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> <1185027953.13693.17.camel@achille> <1185032852.13693.22.camel@achille> Message-ID: <580debd50707211127j3e13bf19v3d0546473f47c2eb@mail.gmail.com> hi michel! could you explain me how to install it? ... i'm a little bit new linux user... thank you for your attention! Rafael 2007/7/21, michel memeteau : > > MBDSYS has an openwource implementation of a server compatible with > openwengo tunneling protocol > > http://www.mbdsys.fr/opensource/htproxy/ > > hhtp headers are modified to specify the udp destination. we maybe could > give a try ? I guess this only could be used on the ekiga platform by few > people , but as the ekiga.net platform is hosted by 9T I guess bandwidth > is not a problem ? > > 2007/7/21, yannick : > > > > Le samedi 21 juillet 2007 ? 16:31 +0200, michel memeteau a ?crit : > > > > > > > > > 2007/7/21, yannick < sevmek at free.fr>: > > > > > > Well, as far as I know about this, this is technically a bad > > > choice for > > > VoIP as it use TCP for transmitting datas. Theoretically > > > speaking, > > > unlike UDP, the TCP module at the far end sends back an > > > acknowledgement > > > for packets which have been successfully received; a timer at > > > the > > > sending TCP will cause a timeout if an acknowledgement is not > > > received > > > within a reasonable round-trip time (or RTT), and the > > > (presumably) lost > > > data will then be re-transmitted. > > > > > > Thus this will increase delay in the transmission as each > > > packet will > > > wait for the acknowledgement. What will happen if one packet > > > is lost ? > > > Does wengo workaround this in some way ? > > > > > > I wonder how well the http tunnel works for wengo. > > > > > > It works Well , and you can even call any sip adress since wengo 2.0, > > > I understand what you meant about tcp , but microsoft use sip > > > messaging over TCP and it works well for exemple. the http tunnel > > > solution is still the only one for http proxy. it's also what google > > > use for google talk. the point is that wengo http tunnel serve ris not > > > > > open source I think. > > > > > > > As far as I understand this technique, it needs a relay server. I highly > > doubt Ekiga can have the necessary ressource to setup such server. > > Beside that, it seems they also workaround the TCP protocol using some > > optimisation. > > > > The real problem is NAT has no standard. This leads to this bad > > situation as described here : > > http://www.brynosaurus.com/pub/net/p2pnat/ > > (I've not finished the reading yet, but this is very interesting to > > understand the problem IMHO). > > The good news is the IETF is working on this issue : > > http://www.ietf.org/html.charters/behave-charter.html > > But this is still a draft :( > > > > This will surely improve. But as now we are stuck... > > > > Regards, > > Yannick > > > > > > > > > > > > > > > > > -- > > > %<------------------------------------------------------->% > > > Michel memeteau > > > VOIP | Visio: sip:freechelmi at gizmoproject.com > > > Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 > > > Mobile : 0624808051 > > > jabber/GoogleTalk : freechelmi at jabber.fr > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -- > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > sip:yannick at ekiga.net > > Logiciel de VoIP Ekiga : http://www.ekiga.org > > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > -- > %<------------------------------------------------------->% > Michel memeteau > VOIP | Visio: sip:freechelmi at gizmoproject.com > Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 > Mobile : 0624808051 > jabber/GoogleTalk : freechelmi at jabber.fr > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Sat Jul 21 19:37:42 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Sat, 21 Jul 2007 21:37:42 +0200 Subject: [Ekiga-list] Configuring Ekiga with proxy/authentication In-Reply-To: <580debd50707211127j3e13bf19v3d0546473f47c2eb@mail.gmail.com> References: <580debd50707191437r235abef5p631666fe5f2f95a8@mail.gmail.com> <1185027953.13693.17.camel@achille> <1185032852.13693.22.camel@achille> <580debd50707211127j3e13bf19v3d0546473f47c2eb@mail.gmail.com> Message-ID: 2007/7/21, Rafael Ernits : > > hi michel! > > could you explain me how to install it? > ... i'm a little bit new linux user... > > thank you for your attention! I don't think it's a good idea for you to install this, this is more aimed to be install along with an openser or asterisk on the server . the best way for you now would be to use openwengo I guess, but no video possible with ekiga users with it :-( -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 Mobile : 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From wolaoye at gmail.com Sun Jul 22 03:44:01 2007 From: wolaoye at gmail.com (wo laoye) Date: Sun, 22 Jul 2007 11:44:01 +0800 Subject: [Ekiga-list] video comm test Message-ID: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> how to test video communication via 500 at ekiga.net? In the View menu, I select Both(Side-by-Side). I get two view, both from my camera only. -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From balachandra.maddina at gmail.com Sun Jul 22 06:22:48 2007 From: balachandra.maddina at gmail.com (balachandra maddina) Date: Sun, 22 Jul 2007 11:52:48 +0530 Subject: [Ekiga-list] problem with ekiga Message-ID: <175eef180707212322w563102b8n8ece3fa1d7875456@mail.gmail.com> Hi , im trying to use ekiga with openser but the problem is when i start openser and try to start ekiga it says the port 5060 is in use n i cant receive any sip incomming calls n when i stop openser and start ekiga its fine but when i try to start openser its not getting started why is this so? can any one pls explain me this. thx for the help. bala. -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Sun Jul 22 06:39:03 2007 From: jpuydt at free.fr (Julien Puydt) Date: Sun, 22 Jul 2007 08:39:03 +0200 Subject: [Ekiga-list] problem with ekiga In-Reply-To: <175eef180707212322w563102b8n8ece3fa1d7875456@mail.gmail.com> References: <175eef180707212322w563102b8n8ece3fa1d7875456@mail.gmail.com> Message-ID: <46A2FB87.20505@free.fr> balachandra maddina a ?crit : > im trying to use ekiga with openser but the problem is when i start openser > and try to start ekiga it says the port 5060 is in use n i cant receive any > sip incomming calls n when i stop openser and start ekiga its fine but > when > i try to start openser its not getting started why is this so? can any one > pls explain me this. As your explanations clearly show, both openser and ekiga try to use the same port 5060, which isn't possible. So the first of them you launch takes the port, and the next can't. Snark on #ekiga From asetlur at alcatel-lucent.com Sun Jul 22 07:24:54 2007 From: asetlur at alcatel-lucent.com (Anand R. Setlur) Date: Sun, 22 Jul 2007 02:24:54 -0500 (CDT) Subject: [Ekiga-list] problem with ekiga In-Reply-To: <46A2FB87.20505@free.fr> References: <175eef180707212322w563102b8n8ece3fa1d7875456@mail.gmail.com> <46A2FB87.20505@free.fr> Message-ID: In such a case the better behavior would be for Ekiga to try an alternate port number and register using a non-standard port with a warning to that effect. Any plans on implementing this more flexible strategy rather than failing if the 5060 port is already in use for some reason? Anand On Sun, 22 Jul 2007, Julien Puydt wrote: > balachandra maddina a ?crit : >> im trying to use ekiga with openser but the problem is when i start openser >> and try to start ekiga it says the port 5060 is in use n i cant receive any >> sip incomming calls n when i stop openser and start ekiga its fine but >> when >> i try to start openser its not getting started why is this so? can any one >> pls explain me this. > > As your explanations clearly show, both openser and ekiga try to use the > same port 5060, which isn't possible. So the first of them you launch > takes the port, and the next can't. > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From mcs1 at ntlworld.com Sun Jul 22 09:12:56 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Sun, 22 Jul 2007 10:12:56 +0100 (BST) Subject: [Ekiga-list] video comm test In-Reply-To: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> Message-ID: <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> What you see in the second window is your stream coming back from the server. It is just a little bit delayed. cheers Michael On Sun 22.07.2007 04:44, wo laoye wrote: >how to test video communication via 500 at ekiga.net? >In the View menu, I select Both(Side-by-Side). >I get two view, both from my camera only. > > > >-- >http://wlaoye.no-ip.biz Powered by Open-Xchange.com From sevmek at free.fr Sun Jul 22 11:18:54 2007 From: sevmek at free.fr (yannick) Date: Sun, 22 Jul 2007 13:18:54 +0200 Subject: [Ekiga-list] problem with ekiga In-Reply-To: <175eef180707212322w563102b8n8ece3fa1d7875456@mail.gmail.com> References: <175eef180707212322w563102b8n8ece3fa1d7875456@mail.gmail.com> Message-ID: <1185103135.13693.26.camel@achille> Le dimanche 22 juillet 2007 ? 11:52 +0530, balachandra maddina a ?crit : > Hi , > > im trying to use ekiga with openser but the problem is when i start > openser and try to start ekiga it says the port 5060 is in use n i > cant receive any sip incomming calls n when i stop openser and start > ekiga its fine but when i try to start openser its not getting started > why is this so? can any one pls explain me this. > As they both try to use the same port, you can change the SIP listen port in Ekiga and probably configure openser to connect with Ekiga new port, while openser will use 5060 for outbound connection. http://wiki.ekiga.org/index.php/Internet_ports_used_by_Ekiga Regards, Yannick > thx for the help. > > bala. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dhull at digitaloverload.net Sun Jul 22 22:10:27 2007 From: dhull at digitaloverload.net (Damien Hull) Date: Sun, 22 Jul 2007 14:10:27 -0800 Subject: [Ekiga-list] How do I video chat with Windows users? Message-ID: <46A3D5D3.5070307@digitaloverload.net> Here's what I have. * Ubuntu Feisty o Comes with Ekiga 2.0.3 * Ekiga sip account * Working web cam I did a lot of searching for a Windows video chat client. All the windows testing was don on XP. * Installed the Windows version of Ekiga o Connects to the Ekiga sip service o Test call works o There's no video * I tried Windows Live Messenger o No sip option * Downloaded Windows Messenger 5.1 something o Followed the instructions on the Ekiga website o It won't connect to the Ekiga sip service I'm trying to use the sip service so I don't have to mess with router settings. I hope there is a Windows video chat client that has a sip option. If there isn't one I'll have to boot XP and use Skype. From michel.memeteau at gmail.com Sun Jul 22 22:34:00 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Mon, 23 Jul 2007 00:34:00 +0200 Subject: [Ekiga-list] How do I video chat with Windows users? In-Reply-To: <46A3D5D3.5070307@digitaloverload.net> References: <46A3D5D3.5070307@digitaloverload.net> Message-ID: compatibility list with Ekiga is on the wiki : http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F Currently , I not sure windows messenger works with a router without posrt forward tweaking ( no STUN support I guess , upnp ? ) Ekiga is currently missing an invite function to send email to friends for helping them getting a SIP adress and software 2007/7/23, Damien Hull : > > Here's what I have. > > * Ubuntu Feisty > o Comes with Ekiga 2.0.3 > * Ekiga sip account > * Working web cam > > I did a lot of searching for a Windows video chat client. All the > windows testing was don on XP. > > * Installed the Windows version of Ekiga > o Connects to the Ekiga sip service > o Test call works > o There's no video > * I tried Windows Live Messenger > o No sip option > * Downloaded Windows Messenger 5.1 something > o Followed the instructions on the Ekiga website > o It won't connect to the Ekiga sip service > > I'm trying to use the sip service so I don't have to mess with router > settings. I hope there is a Windows video chat client that has a sip > option. If there isn't one I'll have to boot XP and use Skype. > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 Mobile : 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From sevmek at free.fr Sun Jul 22 23:44:34 2007 From: sevmek at free.fr (yannick) Date: Mon, 23 Jul 2007 01:44:34 +0200 Subject: [Ekiga-list] How do I video chat with Windows users? In-Reply-To: <46A3D5D3.5070307@digitaloverload.net> References: <46A3D5D3.5070307@digitaloverload.net> Message-ID: <1185147874.13693.29.camel@achille> Le dimanche 22 juillet 2007 ? 14:10 -0800, Damien Hull a ?crit : > Here's what I have. > > * Ubuntu Feisty > o Comes with Ekiga 2.0.3 > * Ekiga sip account > * Working web cam You can refer to the ubuntu documentation I almost wrote: https://help.ubuntu.com/community/Ekiga > > I did a lot of searching for a Windows video chat client. All the > windows testing was don on XP. > > * Installed the Windows version of Ekiga > o Connects to the Ekiga sip service > o Test call works > o There's no video You can try this new BETA version: http://ekiga.net/misc/ekiga-setup-2.0.10-BETA.exe Regards, Yannick > * I tried Windows Live Messenger > o No sip option > * Downloaded Windows Messenger 5.1 something > o Followed the instructions on the Ekiga website > o It won't connect to the Ekiga sip service > > I'm trying to use the sip service so I don't have to mess with router > settings. I hope there is a Windows video chat client that has a sip > option. If there isn't one I'll have to boot XP and use Skype. > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From wolaoye at gmail.com Mon Jul 23 01:35:03 2007 From: wolaoye at gmail.com (wo laoye) Date: Mon, 23 Jul 2007 09:35:03 +0800 Subject: [Ekiga-list] video comm test In-Reply-To: <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> Message-ID: <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> Thks, so it is a loop-back test. Why not have a camera at the other end instead? On 7/22/07, Michael Stockenhuber wrote: > > What you see in the second window is your stream coming back from the > server. It is just a little bit delayed. > cheers > > Michael > > On Sun 22.07.2007 04:44, wo laoye wrote: > > >how to test video communication via 500 at ekiga.net? > >In the View menu, I select Both(Side-by-Side). > >I get two view, both from my camera only. > > > > > > > >-- > >http://wlaoye.no-ip.biz > Powered by Open-Xchange.com > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From wolaoye at gmail.com Mon Jul 23 01:44:55 2007 From: wolaoye at gmail.com (wo laoye) Date: Mon, 23 Jul 2007 09:44:55 +0800 Subject: [Ekiga-list] video test volunteer Message-ID: <5007cebf0707221844u4b11e0ddk88711c5109c3d4c8@mail.gmail.com> Hi, I need to video comm with someone with SIP account to test out ekiga. Any volunteers? My sip account is wlaoye at ekiga.net. -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From oliver at schinagl.nl Mon Jul 23 10:10:02 2007 From: oliver at schinagl.nl (Oliver Schinagl) Date: Mon, 23 Jul 2007 06:10:02 -0400 Subject: [Ekiga-list] video comm test In-Reply-To: <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> Message-ID: <46A47E7A.2020601@schinagl.nl> and who would be on the other end? You could always pay someone i suppose to give you a strip show :p wo laoye wrote: > Thks, so it is a loop-back test. Why not have a camera at the other > end instead? > > > > On 7/22/07, *Michael Stockenhuber* < mcs1 at ntlworld.com > > wrote: > > What you see in the second window is your stream coming back from the > server. It is just a little bit delayed. > cheers > > Michael > > On Sun 22.07.2007 04:44, wo laoye wrote: > > >how to test video communication via 500 at ekiga.net > ? > >In the View menu, I select Both(Side-by-Side). > >I get two view, both from my camera only. > > > > > > > >-- > >http://wlaoye.no-ip.biz > Powered by Open-Xchange.com > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > -- > http://wlaoye.no-ip.biz > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From wolaoye at gmail.com Mon Jul 23 05:27:06 2007 From: wolaoye at gmail.com (wo laoye) Date: Mon, 23 Jul 2007 13:27:06 +0800 Subject: [Ekiga-list] video comm test In-Reply-To: <46A47E7A.2020601@schinagl.nl> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> <46A47E7A.2020601@schinagl.nl> Message-ID: <5007cebf0707222227t6ef3dc89r863c840a466e3c00@mail.gmail.com> the camera can just be aimed at a still object, say, the ekiga logo. This would be a form of advertisement for ekiga. or maybe a strip show by you Oliver? not necessary live, a recorded one will do. :) On 7/23/07, Oliver Schinagl wrote: > > and who would be on the other end? > > You could always pay someone i suppose to give you a strip show :p > > wo laoye wrote: > > Thks, so it is a loop-back test. Why not have a camera at the other > > end instead? > > > > > > > > On 7/22/07, *Michael Stockenhuber* < mcs1 at ntlworld.com > > > wrote: > > > > What you see in the second window is your stream coming back from > the > > server. It is just a little bit delayed. > > cheers > > > > Michael > > > > On Sun 22.07.2007 04:44, wo laoye wrote: > > > > >how to test video communication via 500 at ekiga.net > > ? > > >In the View menu, I select Both(Side-by-Side). > > >I get two view, both from my camera only. > > > > > > > > > > > >-- > > >http://wlaoye.no-ip.biz > > Powered by Open-Xchange.com > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > -- > > http://wlaoye.no-ip.biz > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From oliver at schinagl.nl Mon Jul 23 10:38:35 2007 From: oliver at schinagl.nl (Oliver Schinagl) Date: Mon, 23 Jul 2007 06:38:35 -0400 Subject: [Ekiga-list] video comm test In-Reply-To: <5007cebf0707222227t6ef3dc89r863c840a466e3c00@mail.gmail.com> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> <46A47E7A.2020601@schinagl.nl> <5007cebf0707222227t6ef3dc89r863c840a466e3c00@mail.gmail.com> Message-ID: <46A4852B.8060808@schinagl.nl> the problem is, you' dhave to physically install a webcam on the server, which is usually run by a wbehosting provider (sourceforge) so that's impossible. Playing back a video would work, but wouldn't look 'as real'. Maybe overlay a video ontop of the received video before echoing back so you get your own image + something static. For money, I always strip! :p wo laoye wrote: > the camera can just be aimed at a still object, say, the ekiga logo. > This would be a form of advertisement for ekiga. > > or maybe a strip show by you Oliver? not necessary live, a recorded > one will do. :) > > > On 7/23/07, *Oliver Schinagl* > wrote: > > and who would be on the other end? > > You could always pay someone i suppose to give you a strip show :p > > wo laoye wrote: > > Thks, so it is a loop-back test. Why not have a camera at the other > > end instead? > > > > > > > > On 7/22/07, *Michael Stockenhuber* < mcs1 at ntlworld.com > > > >> wrote: > > > > What you see in the second window is your stream coming back > from the > > server. It is just a little bit delayed. > > cheers > > > > Michael > > > > On Sun 22.07.2007 04:44, wo laoye wrote: > > > > >how to test video communication via 500 at ekiga.net > > > >? > > >In the View menu, I select Both(Side-by-Side). > > >I get two view, both from my camera only. > > > > > > > > > > > >-- > > >http://wlaoye.no-ip.biz > > Powered by Open-Xchange.com > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > -- > > http://wlaoye.no-ip.biz > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > -- > http://wlaoye.no-ip.biz > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From chutz at gg3.net Mon Jul 23 05:44:28 2007 From: chutz at gg3.net (Georgi Georgiev) Date: Mon, 23 Jul 2007 14:44:28 +0900 Subject: [Ekiga-list] video comm test In-Reply-To: <46A4852B.8060808@schinagl.nl> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> <46A47E7A.2020601@schinagl.nl> <5007cebf0707222227t6ef3dc89r863c840a466e3c00@mail.gmail.com> <46A4852B.8060808@schinagl.nl> Message-ID: <20070723144428.hcfuj0e668osogwk@horde.gg3.net> Come-on guys, it's an *echo test* "to give you an audible sense of the delay between you and the server running the echo test application" (quoting from memory). Playback doesn't cut it. Neither does a webcam pointed at a still object. Calling 500 at ekiga and feeding it the moving logo gives you very nice visual sense of the delay as well. Quoting Oliver Schinagl : > the problem is, you' dhave to physically install a webcam on the server, > which is usually run by a wbehosting provider (sourceforge) so that's > impossible. Playing back a video would work, but wouldn't look 'as > real'. Maybe overlay a video ontop of the received video before echoing > back so you get your own image + something static. > > For money, I always strip! :p > > wo laoye wrote: >> the camera can just be aimed at a still object, say, the ekiga logo. >> This would be a form of advertisement for ekiga. >> >> or maybe a strip show by you Oliver? not necessary live, a recorded >> one will do. :) >> >> >> On 7/23/07, *Oliver Schinagl* > > wrote: >> >> and who would be on the other end? >> >> You could always pay someone i suppose to give you a strip show :p >> >> wo laoye wrote: >> > Thks, so it is a loop-back test. Why not have a camera at the other >> > end instead? >> > >> > >> > >> > On 7/22/07, *Michael Stockenhuber* < mcs1 at ntlworld.com >> >> > >> wrote: >> > >> > What you see in the second window is your stream coming back >> from the >> > server. It is just a little bit delayed. >> > cheers >> > >> > Michael >> > >> > On Sun 22.07.2007 04:44, wo laoye wrote: >> > >> > >how to test video communication via 500 at ekiga.net >> >> > >? >> > >In the View menu, I select Both(Side-by-Side). >> > >I get two view, both from my camera only. >> > > >> > > >> > > >> > >-- >> > >http://wlaoye.no-ip.biz >> > Powered by Open-Xchange.com >> > >> > _______________________________________________ >> > ekiga-list mailing list >> > ekiga-list at gnome.org > ekiga-list at gnome.org > >> > http://mail.gnome.org/mailman/listinfo/ekiga-list >> > >> > >> > >> > >> > -- >> > http://wlaoye.no-ip.biz >> > >> ------------------------------------------------------------------------ >> > >> > _______________________________________________ >> > ekiga-list mailing list >> > ekiga-list at gnome.org >> > http://mail.gnome.org/mailman/listinfo/ekiga-list >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> >> >> >> >> -- >> http://wlaoye.no-ip.biz >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Georgi From jpuydt at free.fr Mon Jul 23 06:31:18 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 23 Jul 2007 08:31:18 +0200 Subject: [Ekiga-list] How do I video chat with Windows users? In-Reply-To: <46A3D5D3.5070307@digitaloverload.net> References: <46A3D5D3.5070307@digitaloverload.net> Message-ID: <46A44B36.80404@free.fr> Damien Hull a ?crit : > o Comes with Ekiga 2.0.3 No, no, no. This version is awfully old -- there have been *six* stable bugfix releases since then. Upgrade and complain to your distribution maintainers for not shipping a more recent version. Snark on #ekiga From jpuydt at free.fr Mon Jul 23 06:32:25 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 23 Jul 2007 08:32:25 +0200 Subject: [Ekiga-list] video test volunteer In-Reply-To: <5007cebf0707221844u4b11e0ddk88711c5109c3d4c8@mail.gmail.com> References: <5007cebf0707221844u4b11e0ddk88711c5109c3d4c8@mail.gmail.com> Message-ID: <46A44B79.5070201@free.fr> wo laoye a ?crit : > I need to video comm with someone with SIP account to test out ekiga. Any > volunteers? > My sip account is wlaoye at ekiga.net. sip:500 at ekiga.net is supposed to read you an audio message, then send back to you your audio & video. Snark on #ekiga From jpuydt at free.fr Mon Jul 23 06:35:13 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 23 Jul 2007 08:35:13 +0200 Subject: [Ekiga-list] video comm test In-Reply-To: <20070723144428.hcfuj0e668osogwk@horde.gg3.net> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> <46A47E7A.2020601@schinagl.nl> <5007cebf0707222227t6ef3dc89r863c840a466e3c00@mail.gmail.com> <46A4852B.8060808@schinagl.nl> <20070723144428.hcfuj0e668osogwk@horde.gg3.net> Message-ID: <46A44C21.4080404@free.fr> Georgi Georgiev a ?crit : > Come-on guys, it's an *echo test* "to give you an audible sense of the > delay between you and the server running the echo test application" > (quoting from memory). Playback doesn't cut it. Neither does a webcam > pointed at a still object. Calling 500 at ekiga and feeding it the moving > logo gives you very nice visual sense of the delay as well. You're so very right. And I might add : if they really want to see a strip performance from sip:500 at ekiga.net, there's an easy way to get it : have someone do it in front of their own webcam! Snark on #ekiga From frmas at free.fr Mon Jul 23 06:48:53 2007 From: frmas at free.fr (Francois) Date: Mon, 23 Jul 2007 08:48:53 +0200 Subject: [Ekiga-list] video test volunteer In-Reply-To: <46A44B79.5070201@free.fr> References: <5007cebf0707221844u4b11e0ddk88711c5109c3d4c8@mail.gmail.com> <46A44B79.5070201@free.fr> Message-ID: <200707230848.53464.frmas@free.fr> On lundi 23 juillet 2007, Julien Puydt wrote: > wo laoye a ?crit : > > I need to video comm with someone with SIP account to test out ekiga. > > Any volunteers? > > My sip account is wlaoye at ekiga.net. > > sip:500 at ekiga.net is supposed to read you an audio message, then send > back to you your audio & video. A question as Wo Laoye is testing his system with me : trying to chat with him using the Chat window, once I write something, hit enter, I have a message in that window saying "D?lai D?pass?". (= exceeded time). Where does this come from ? A setting from my side, from his side, both ? Thank you. Francois From geek.arnuld at gmail.com Mon Jul 23 06:52:13 2007 From: geek.arnuld at gmail.com (arnuld) Date: Sun, 22 Jul 2007 23:52:13 -0700 Subject: [Ekiga-list] video test volunteer In-Reply-To: <46A44B79.5070201@free.fr> References: <5007cebf0707221844u4b11e0ddk88711c5109c3d4c8@mail.gmail.com> <46A44B79.5070201@free.fr> Message-ID: sorry On 7/22/07, Julien Puydt wrote: > wo laoye a ?crit : > > I need to video comm with someone with SIP account to test out ekiga. Any > > volunteers? > > My sip account is wlaoye at ekiga.net. > > > sip:500 at ekiga.net is supposed to read you an audio message, then send > back to you your audio & video. > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- http://arnuld.blogspot.com/ From wolaoye at gmail.com Mon Jul 23 06:57:33 2007 From: wolaoye at gmail.com (wo laoye) Date: Mon, 23 Jul 2007 14:57:33 +0800 Subject: [Ekiga-list] White Pages Message-ID: <5007cebf0707222357j35839b8dl2b7be2343aa96e6a@mail.gmail.com> How to register my name in the White Pages? -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From wolaoye at gmail.com Mon Jul 23 07:38:28 2007 From: wolaoye at gmail.com (wo laoye) Date: Mon, 23 Jul 2007 15:38:28 +0800 Subject: [Ekiga-list] How do I video chat with Windows users? In-Reply-To: <46A44B36.80404@free.fr> References: <46A3D5D3.5070307@digitaloverload.net> <46A44B36.80404@free.fr> Message-ID: <5007cebf0707230038x53f437d2qa35fcc48054a2363@mail.gmail.com> Hi, I am also interested in chatting with Windows users via ekiga. Say, the other end is a client with a ADSL On 7/23/07, Julien Puydt wrote: > > Damien Hull a ?crit : > > o Comes with Ekiga 2.0.3 > > No, no, no. This version is awfully old -- there have been *six* stable > bugfix releases since then. > > Upgrade and complain to your distribution maintainers for not shipping a > more recent version. > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From wolaoye at gmail.com Mon Jul 23 07:44:25 2007 From: wolaoye at gmail.com (wo laoye) Date: Mon, 23 Jul 2007 15:44:25 +0800 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <5007cebf0707230038x53f437d2qa35fcc48054a2363@mail.gmail.com> References: <46A3D5D3.5070307@digitaloverload.net> <46A44B36.80404@free.fr> <5007cebf0707230038x53f437d2qa35fcc48054a2363@mail.gmail.com> Message-ID: <5007cebf0707230044k7ff03135g9e4ce8d70d978803@mail.gmail.com> Sorry, accidentally hit the 'Send' button before I complete my msg. I am also interested in chatting with Windows users via ekiga. Say, the other end is a client with a ADSL link, running WinXP. Question: Does it has to run ekiga too? Or will Win Messenger suffice? ---------- Forwarded message ---------- From: wo laoye Date: Jul 23, 2007 3:38 PM Subject: Re: [Ekiga-list] How do I video chat with Windows users? To: Ekiga mailing list Hi, I am also interested in chatting with Windows users via ekiga. Say, the other end is a client with a ADSL On 7/23/07, Julien Puydt < jpuydt at free.fr> wrote: > > Damien Hull a ?crit : > > o Comes with Ekiga 2.0.3 > > No, no, no. This version is awfully old -- there have been *six* stable > bugfix releases since then. > > Upgrade and complain to your distribution maintainers for not shipping a > more recent version. > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- http://wlaoye.no-ip.biz -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Mon Jul 23 07:54:58 2007 From: jpuydt at free.fr (Julien Puydt) Date: Mon, 23 Jul 2007 09:54:58 +0200 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <5007cebf0707230044k7ff03135g9e4ce8d70d978803@mail.gmail.com> References: <46A3D5D3.5070307@digitaloverload.net> <46A44B36.80404@free.fr> <5007cebf0707230038x53f437d2qa35fcc48054a2363@mail.gmail.com> <5007cebf0707230044k7ff03135g9e4ce8d70d978803@mail.gmail.com> Message-ID: <46A45ED2.5050406@free.fr> wo laoye a ?crit : > Sorry, accidentally hit the 'Send' button before I complete my msg. > > > I am also interested in chatting with Windows users via ekiga. Say, the > other end is a client with a ADSL link, running WinXP. > > Question: > Does it has to run ekiga too? Or will Win Messenger suffice? You'll find all your answers here : http://wiki.ekiga.org/index.php/Main_Page Snark on #ekiga From jdkaye10 at yahoo.es Mon Jul 23 09:12:59 2007 From: jdkaye10 at yahoo.es (Jonathan Kaye) Date: Mon, 23 Jul 2007 11:12:59 +0200 Subject: [Ekiga-list] problem with 2.0.9 Message-ID: <46A4711B.2010408@yahoo.es> Hi all, Inspired by various messages on the list I upgraded Ekiga from 2.0.3 to 2.0.9 on my Debian Lenny 2.6.18 box. Ekiga took me through the setup wizard again when I restarted it but it remembered the values from the previous version so I just had to confirm what I had before. The curious things is that it claims not to detect my video device a 120 Spacecam using Michel's sn9c102 driver. What makes it curious is that the undetected video actually works fine both locally and with the 500 at ekiga.net test call. Any thoughts on this? Cheers, Jonathan Registerd Linux user #445917 at http://counter.li.org/ From wolaoye at gmail.com Mon Jul 23 10:07:20 2007 From: wolaoye at gmail.com (wo laoye) Date: Mon, 23 Jul 2007 18:07:20 +0800 Subject: [Ekiga-list] problem with 2.0.9 In-Reply-To: <46A4711B.2010408@yahoo.es> References: <46A4711B.2010408@yahoo.es> Message-ID: <5007cebf0707230307x17d2cddav18522c468fd67a75@mail.gmail.com> Hi Jon, I am also a debian 'testing' user too. did you upgrade fr debian repo or ekiga site? On 7/23/07, Jonathan Kaye wrote: > > Hi all, > Inspired by various messages on the list I upgraded Ekiga from 2.0.3 to > 2.0.9 on my Debian Lenny 2.6.18 box. Ekiga took me through the setup > wizard again when I restarted it but it remembered the values from the > previous version so I just had to confirm what I had before. The curious > things is that it claims not to detect my video device a 120 Spacecam > using Michel's sn9c102 driver. What makes it curious is that the > undetected video actually works fine both locally and with the > 500 at ekiga.net test call. Any thoughts on this? > Cheers, > Jonathan > > Registerd Linux user #445917 at http://counter.li.org/ > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From jdkaye10 at yahoo.es Mon Jul 23 12:43:38 2007 From: jdkaye10 at yahoo.es (Jonathan Kaye) Date: Mon, 23 Jul 2007 14:43:38 +0200 Subject: [Ekiga-list] problem with 2.0.9 In-Reply-To: <5007cebf0707230307x17d2cddav18522c468fd67a75@mail.gmail.com> References: <46A4711B.2010408@yahoo.es> <5007cebf0707230307x17d2cddav18522c468fd67a75@mail.gmail.com> Message-ID: <46A4A27A.2050501@yahoo.es> wo laoye ha escrit el 23/07/07 12:07: > Hi Jon, > I am also a debian 'testing' user too. did you upgrade fr debian repo > or ekiga site? > > > > On 7/23/07, *Jonathan Kaye* < jdkaye10 at yahoo.es > > wrote: > > Hi all, > Inspired by various messages on the list I upgraded Ekiga from > 2.0.3 to > 2.0.9 on my Debian Lenny 2.6.18 box. Ekiga took me through the setup > wizard again when I restarted it but it remembered the values from the > previous version so I just had to confirm what I had before. The > curious > things is that it claims not to detect my video device a 120 Spacecam > using Michel's sn9c102 driver. What makes it curious is that the > undetected video actually works fine both locally and with the > 500 at ekiga.net test call. Any thoughts on this? > Cheers, > Jonathan > Hi Laoye, No I alt-pinned the Sid packages from Debian. I believe they have all the same packges found on the Ekiga site. Cheers, Jonathan From wolaoye at gmail.com Mon Jul 23 14:24:17 2007 From: wolaoye at gmail.com (wo laoye) Date: Mon, 23 Jul 2007 22:24:17 +0800 Subject: [Ekiga-list] server load Message-ID: <5007cebf0707230724p5fdcc48ep562e4356bfbb8dd1@mail.gmail.com> is the ekiga server load especially heavy at this time of the day? About 7 to 8 hours ago I able to video comm but now I can't even register. -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From jan.schampera at web.de Mon Jul 23 16:02:17 2007 From: jan.schampera at web.de (Jan Schampera) Date: Mon, 23 Jul 2007 18:02:17 +0200 Subject: [Ekiga-list] White Pages In-Reply-To: <5007cebf0707222357j35839b8dl2b7be2343aa96e6a@mail.gmail.com> References: <5007cebf0707222357j35839b8dl2b7be2343aa96e6a@mail.gmail.com> Message-ID: <20070723180217.3117ac26@mainserver.home.thebonsai.de> On Mon, 23 Jul 2007 14:57:33 +0800 "wo laoye" wrote: > How to register my name in the White Pages? If you subscribe to ekiga.net you occour there automatically (though I remember you can set a check-box for it in the profile). Regards, Jan -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From sevmek at free.fr Mon Jul 23 16:12:45 2007 From: sevmek at free.fr (yannick) Date: Mon, 23 Jul 2007 18:12:45 +0200 Subject: [Ekiga-list] server load In-Reply-To: <5007cebf0707230724p5fdcc48ep562e4356bfbb8dd1@mail.gmail.com> References: <5007cebf0707230724p5fdcc48ep562e4356bfbb8dd1@mail.gmail.com> Message-ID: <1185207165.13693.32.camel@achille> Le lundi 23 juillet 2007 ? 22:24 +0800, wo laoye a ?crit : > is the ekiga server load especially heavy at this time of the day? > About 7 to 8 hours ago I able to video comm but now I can't even > register. It works here. Regards, Yannick > > -- > http://wlaoye.no-ip.biz > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From dhull at digitaloverload.net Mon Jul 23 18:05:20 2007 From: dhull at digitaloverload.net (Damien Hull) Date: Mon, 23 Jul 2007 10:05:20 -0800 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <5007cebf0707230044k7ff03135g9e4ce8d70d978803@mail.gmail.com> References: <46A3D5D3.5070307@digitaloverload.net> <46A44B36.80404@free.fr> <5007cebf0707230038x53f437d2qa35fcc48054a2363@mail.gmail.com> <5007cebf0707230044k7ff03135g9e4ce8d70d978803@mail.gmail.com> Message-ID: <46A4EDE0.9070107@digitaloverload.net> I'm still trying to figure this out. Based on my experience I would say no. Is there anyone on the list that has actually connected Ekiga on Linux with a Windows client? wo laoye wrote: > Sorry, accidentally hit the 'Send' button before I complete my msg. > > > I am also interested in chatting with Windows users via ekiga. Say, > the other end is a client with a ADSL link, running WinXP. > > Question: > Does it has to run ekiga too? Or will Win Messenger suffice? > > > > ---------- Forwarded message ---------- > From: *wo laoye* < wolaoye at gmail.com > > Date: Jul 23, 2007 3:38 PM > Subject: Re: [Ekiga-list] How do I video chat with Windows users? > To: Ekiga mailing list > > > Hi, > I am also interested in chatting with Windows users via ekiga. Say, > the other end is a client with a ADSL > > > On 7/23/07, *Julien Puydt* < jpuydt at free.fr > > wrote: > > Damien Hull a ?crit : > > o Comes with Ekiga 2.0.3 > > No, no, no. This version is awfully old -- there have been *six* > stable > bugfix releases since then. > > Upgrade and complain to your distribution maintainers for not > shipping a > more recent version. > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > -- > http://wlaoye.no-ip.biz > > -- > http://wlaoye.no-ip.biz > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From monkey at monkeynet.ca Mon Jul 23 18:25:58 2007 From: monkey at monkeynet.ca (Derek "The Monkey" Wueppelmann) Date: Mon, 23 Jul 2007 14:25:58 -0400 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <46A4EDE0.9070107@digitaloverload.net> References: <46A3D5D3.5070307@digitaloverload.net> <46A44B36.80404@free.fr> <5007cebf0707230038x53f437d2qa35fcc48054a2363@mail.gmail.com> <5007cebf0707230044k7ff03135g9e4ce8d70d978803@mail.gmail.com> <46A4EDE0.9070107@digitaloverload.net> Message-ID: <1185215158.11096.42.camel@phosphorus.roaringpenguin.com> On Mon, 2007-07-23 at 10:05 -0800, Damien Hull wrote: > I'm still trying to figure this out. Based on my experience I would say no. > > Is there anyone on the list that has actually connected Ekiga on Linux > with a Windows client? I have done this, however it was a while ago. I did Linux Ekiga to Windows Ekiga. It worked pretty well. -- o) Derek Wueppelmann (o (D . monkey at monkeynet.ca D). ((` http://www.monkeynet.ca ( ) ` -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From dhull at digitaloverload.net Mon Jul 23 18:49:45 2007 From: dhull at digitaloverload.net (Damien Hull) Date: Mon, 23 Jul 2007 10:49:45 -0800 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <1185215158.11096.42.camel@phosphorus.roaringpenguin.com> References: <46A3D5D3.5070307@digitaloverload.net> <46A44B36.80404@free.fr> <5007cebf0707230038x53f437d2qa35fcc48054a2363@mail.gmail.com> <5007cebf0707230044k7ff03135g9e4ce8d70d978803@mail.gmail.com> <46A4EDE0.9070107@digitaloverload.net> <1185215158.11096.42.camel@phosphorus.roaringpenguin.com> Message-ID: <46A4F849.1090107@digitaloverload.net> This gives me hope. Did you try video? Derek "The Monkey" Wueppelmann wrote: > On Mon, 2007-07-23 at 10:05 -0800, Damien Hull wrote: > >> I'm still trying to figure this out. Based on my experience I would say no. >> >> Is there anyone on the list that has actually connected Ekiga on Linux >> with a Windows client? >> > > I have done this, however it was a while ago. I did Linux Ekiga to > Windows Ekiga. It worked pretty well. > > > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From monkey at monkeynet.ca Mon Jul 23 19:01:41 2007 From: monkey at monkeynet.ca (Derek "The Monkey" Wueppelmann) Date: Mon, 23 Jul 2007 15:01:41 -0400 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <46A4F849.1090107@digitaloverload.net> References: <46A3D5D3.5070307@digitaloverload.net> <46A44B36.80404@free.fr> <5007cebf0707230038x53f437d2qa35fcc48054a2363@mail.gmail.com> <5007cebf0707230044k7ff03135g9e4ce8d70d978803@mail.gmail.com> <46A4EDE0.9070107@digitaloverload.net> <1185215158.11096.42.camel@phosphorus.roaringpenguin.com> <46A4F849.1090107@digitaloverload.net> Message-ID: <1185217301.11096.44.camel@phosphorus.roaringpenguin.com> On Mon, 2007-07-23 at 10:49 -0800, Damien Hull wrote: > This gives me hope. Did you try video? Yes, I had video and sound working without any problems (Well the usual echo problems). -- o) Derek Wueppelmann (o (D . monkey at monkeynet.ca D). ((` http://www.monkeynet.ca ( ) ` -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From palos at post.sk Tue Jul 24 07:50:10 2007 From: palos at post.sk (Palo S.) Date: 24 Jul 2007 09:50:10 +0200 (CEST) Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? Message-ID: <46A5AF32.000001.08279@kamasutra> I tried Ekiga on Linux with Ekiga on Windows, video did not work at all, sound worked usually for several minutes only - suddenly, it began to give you only loud \"knocking\" at both ends... I did not have access to the Windows end (probably responsible for the problem) so I could not see the -d output from Windows machine... __________ Mozaika storo?ia denn?ka SME - http://mozaika.sme.sk From sevmek at free.fr Tue Jul 24 10:43:19 2007 From: sevmek at free.fr (yannick) Date: Tue, 24 Jul 2007 12:43:19 +0200 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <46A5AF32.000001.08279@kamasutra> References: <46A5AF32.000001.08279@kamasutra> Message-ID: <1185273799.13693.37.camel@achille> Le mardi 24 juillet 2007 ? 09:50 +0200, Palo S. a ?crit : > I tried Ekiga on Linux with Ekiga on Windows, video did not work at all, sound worked usually for several minutes only - suddenly, it began to give you only loud \"knocking\" at both ends... I did not have access to the Windows end (probably responsible for the problem) so I could not see the -d output from Windows machine... > > Hi, Did you try version 2.0.10 for windows? http://ekiga.net/misc/ekiga-setup-2.0.10-BETA.exe Regards, Yannick > > > > __________ > Mozaika storo?ia denn?ka SME - http://mozaika.sme.sk > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From palos at post.sk Tue Jul 24 10:34:19 2007 From: palos at post.sk (Palo S.) Date: 24 Jul 2007 12:34:19 +0200 (CEST) Subject: [Ekiga-list] Fwd: Re: Re: Fwd: How do I video chat with Windows users? Message-ID: <46A5D5AB.000001.28263@kamasutra> > Did you try version 2.0.10 for windows? > http://ekiga.net/misc/ekiga-setup-2.0.10-BETA.exe No, it was 2.0.9 beta for Windows - I will tell my friend to install 2.0.10 on his Windows machine and get back here soon! From monkey at monkeynet.ca Tue Jul 24 12:13:35 2007 From: monkey at monkeynet.ca (Derek Wueppelmann) Date: Tue, 24 Jul 2007 08:13:35 -0400 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <46A5AF32.000001.08279@kamasutra> References: <46A5AF32.000001.08279@kamasutra> Message-ID: <1185279215.2038.1.camel@betelgeuse.orion> On Tue, 2007-07-24 at 09:50 +0200, Palo S. wrote: > I tried Ekiga on Linux with Ekiga on Windows, video did not work at all, sound worked usually for several minutes only - suddenly, it began to give you only loud \"knocking\" at both ends... I did not have access to the Windows end (probably responsible for the problem) so I could not see the -d output from Windows machine... It was quite some time ago that I had actually done this, and I did originally set the two systems up when I was on the same network and had access to both of them. I'm probably going to be looking at this again in the next week or so I can post what I find when I attempt it again then. -- o) Derek Wueppelmann (o (D . monkey at monkey.homeip.net D). ((` http://monkey.homeip.net/ ( ) ` -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: This is a digitally signed message part URL: From wolaoye at gmail.com Tue Jul 24 14:30:17 2007 From: wolaoye at gmail.com (wo laoye) Date: Tue, 24 Jul 2007 22:30:17 +0800 Subject: [Ekiga-list] ekiga community Message-ID: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> the ekiga community is very inactive. most of them are not online most of the time. will ekiga ever be as popular as skype? -- http://wlaoye.no-ip.biz -------------- next part -------------- An HTML attachment was scrubbed... URL: From michel.memeteau at gmail.com Tue Jul 24 14:36:16 2007 From: michel.memeteau at gmail.com (michel memeteau) Date: Tue, 24 Jul 2007 16:36:16 +0200 Subject: [Ekiga-list] ekiga community In-Reply-To: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> References: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> Message-ID: 2007/7/24, wo laoye : > > the ekiga community is very inactive. most of them are not online most of > the time. > > will ekiga ever be as popular as skype? Funny question ! You are one of the guys that can make it popular , we all are ... -- > http://wlaoye.no-ip.biz > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau VOIP | Visio: sip:freechelmi at gizmoproject.com Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 Mobile : 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From ashleystrutt at btinternet.com Tue Jul 24 16:04:39 2007 From: ashleystrutt at btinternet.com (ashley) Date: Tue, 24 Jul 2007 16:04:39 +0000 Subject: [Ekiga-list] ekiga community In-Reply-To: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> References: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> Message-ID: <46A62317.8090804@btinternet.com> I'm sure I've seen something where you can see whose on line but never found it. Ashley > the ekiga community is very inactive. most of them are not online most > of the time. > > will ekiga ever be as popular as skype? > > > -- > http://wlaoye.no-ip.biz > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From gwenn.moreilles at yahoo.fr Tue Jul 24 17:58:42 2007 From: gwenn.moreilles at yahoo.fr (gwenn) Date: Tue, 24 Jul 2007 19:58:42 +0200 Subject: [Ekiga-list] Fwd: How do I video chat with Windows users? In-Reply-To: <46A5AF32.000001.08279@kamasutra> References: <46A5AF32.000001.08279@kamasutra> Message-ID: <1185299922.5411.1.camel@gwenn-desktop> Is it vista or XP? I also tried from linux to vista and it doesn' work at all (no sound, no video) Le mardi 24 juillet 2007 ? 09:50 +0200, Palo S. a ?crit : > I tried Ekiga on Linux with Ekiga on Windows, video did not work at all, sound worked usually for several minutes only - suddenly, it began to give you only loud \"knocking\" at both ends... I did not have access to the Windows end (probably responsible for the problem) so I could not see the -d output from Windows machine... > > > > > > __________ > Mozaika storo?ia denn?ka SME - http://mozaika.sme.sk > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From romanantensteiner at gmx.at Tue Jul 24 19:16:19 2007 From: romanantensteiner at gmx.at (Roman Antensteiner) Date: Tue, 24 Jul 2007 21:16:19 +0200 Subject: [Ekiga-list] Registration and set-up should be more intuitive... Message-ID: <1185304579.6043.43.camel@roman-desktop> While I agree, it's not that difficult to understand - a friend and I both had exactly the same problems setting things up. After you go through the installation process, you kind of assume that you are getting registered, unless you read the small print carefully. It would be nice if it was really clear that you are giving the information to connect to an existing account, and not registering a new one. I know it's there, but it should be shorter and clearer. Most people don't read those things, and very likely you won't either. You assume certain things. When I get asked for my full name, then username and password - I assume I'm getting registered. Because I have never encountered a log-in so far that asked me for anything besides Username and Password. I wouldn't even point that out if my friend didn't fall for the same fallacy a day later. I would suggest a short line like "If you do NOT have an Ekiga Account yet, click HERE to register" Above the fields where you enter your user information. Secondly, I believe I had to go into the Account settings to adjust the settings after registration. They weren't set correctly by the druid. And If someone, like me, never used SIP VOIP services, you cannot possibly know what a "Registrar" Is supposed to be. After you have registered it should say clearly what goes where in the account settings. I am usually not nearly as picky with any other program, but since the purpose of this program is to communicate with people, I want to be able to tell my friends to install and register, without having to provide them with the necessary information about SIP services. Also, a test call should be implemented. I've read on a couple of sites "I've tried the ekiga test call..." But I couldn't find the address. Anyway, it should be in the contacts by default. It's rather tedious to find out if the audio settings are correct by calling someone. I know this is a lot of criticism for one post. Please don't take it the wrong way. I'm very excited that there is a native VOIP client for gnome, and I had less trouble with it so far then I did with Open Wengo. But the points I've listed are really mundane, and would make a big difference in my opinion. thanks for your time, Roman A. From oliver at schinagl.nl Tue Jul 24 20:12:33 2007 From: oliver at schinagl.nl (Oliver Schinagl) Date: Tue, 24 Jul 2007 16:12:33 -0400 Subject: [Ekiga-list] Conference room status Message-ID: <46A65D31.40401@schinagl.nl> Hi, i was just wondering what the status is on converencing with ekiga these days. I know you can 'dial' into a preset server/channels, but does this work 'dumb user mode' too? I hate to bring up skype, but I'm thinking, right click user, invite to converence. A simple message could be sent to the user to join channel number XXX with pin YYY. Also does ekiga work with video conference aswell? E.g. have more then 2 users see eachother via webcams? As that would be a 'killer feature' for ekiga. I know you can't just host rooms for video aswell, as it al costs a lot of bandwidth, and I know ekiga can't build mini servers into their apps, like skype does, cause i belive it's an outrage that they do that. Anyway, just sharing a few thoughts/questions. Oliver From oliver at schinagl.nl Tue Jul 24 20:50:32 2007 From: oliver at schinagl.nl (Oliver Schinagl) Date: Tue, 24 Jul 2007 16:50:32 -0400 Subject: [Ekiga-list] ekiga community In-Reply-To: References: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> Message-ID: <46A66618.1090101@schinagl.nl> My personal thought, no, never. Atleast the way I know/work with it not. What ekiga is laking is a 'buddy list'. People like that, people want that. So what you'd want is incorporate the video/voice capabilities of ekiga in to pidgin. Then you have something that has a chance to compete with skype. Add a whitelist directory and your good to go. 1 client to do it all, thought video/audio with other clients would have to be reversed engineerd and shit like that. Hey a person can dream right. michel memeteau wrote: > > > 2007/7/24, wo laoye >: > > the ekiga community is very inactive. most of them are not online > most of the time. > > will ekiga ever be as popular as skype? > > > Funny question ! You are one of the guys that can make it popular , > we all are ... > > -- > http://wlaoye.no-ip.biz > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > -- > %<------------------------------------------------------->% > Michel memeteau > VOIP | Visio: sip:freechelmi at gizmoproject.com > > Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 > Mobile : 0624808051 > jabber/GoogleTalk : freechelmi at jabber.fr > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From geek.arnuld at gmail.com Tue Jul 24 21:15:31 2007 From: geek.arnuld at gmail.com (arnuld) Date: Wed, 25 Jul 2007 02:45:31 +0530 Subject: [Ekiga-list] ekiga community In-Reply-To: <46A66618.1090101@schinagl.nl> References: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> <46A66618.1090101@schinagl.nl> Message-ID: > On 7/25/07, Oliver Schinagl wrote: > What ekiga is laking is a 'buddy list'. People like that, people want that. > So what you'd want is incorporate the video/voice capabilities of ekiga > in to pidgin. Then you have something that has a chance to compete with > skype. Add a whitelist directory and your good to go. > 1 client to do it all, thought video/audio with other clients would have > to be reversed engineerd and shit like that. > Hey a person can dream right. i think a better idea will be building a jabber voice-chat client or adding voice-chat facility to "gajim". we do not need to spend huge amounts of time to reverse-engineer YAHOO or MSN protocols for voice-chat. building on an OpenSource protocol is a much better idea. i am still not able to get any of my friends switch to Ekiga because all of them are Windows users and for them (only for them,the Windows users) it is very much difficult to set up Ekiga, the codecs, the run-time environment, no buddy list, long start-up times (which actually is connection time when Ekiga starts up :-) but i see those users are switching away from YAHOO and Skype to Google Talk because Google Talk is small in size (just 1.5 MB) and it does not clutter and it is much easier to set-up + sound quality is much better. when new client with features like: 1.) better (or i should say good) sound quality 2.) buddy list (i hate YAHOO way) 3.) less cluttered 4.) a simple design, simple UI (like Google Talk) 5.) lot less settings/preferences/features then it will sweep the market like GNOME/KDE did to the Desktp market. OpenSource protocols are a much better alternative than time-sucking reverse engineering task. people do not want YAHOO, Skype or Google Talk. they want to talk and i think doing simply this one thing will be much better target. i also think following the UNIX way - do one thing and do it well - will lead to the resolution of problems. we do not need to add Webcam features and load of other extra functionalities and eye candy built into the IM. we can just focus on 1 task -- Voice-Chat client and put our efforts and energy into that. BTW, i think Ekiga has one feature that none of the IM have, the audio codecs for different bandwidth requirements and when everything fails then Ekiga shines on a much lower bandwidth connection :-) -- http://arnuld.blogspot.com/ From sevmek at free.fr Tue Jul 24 21:59:37 2007 From: sevmek at free.fr (yannick) Date: Tue, 24 Jul 2007 23:59:37 +0200 Subject: [Ekiga-list] ekiga community In-Reply-To: <46A66618.1090101@schinagl.nl> References: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> <46A66618.1090101@schinagl.nl> Message-ID: <1185314377.13693.42.camel@achille> Le mardi 24 juillet 2007 ? 16:50 -0400, Oliver Schinagl a ?crit : > My personal thought, no, never. Atleast the way I know/work with it not. > What ekiga is laking is a 'buddy list'. People like that, people want that. > So what you'd want is incorporate the video/voice capabilities of ekiga > in to pidgin. Then you have something that has a chance to compete with > skype. Add a whitelist directory and your good to go. > 1 client to do it all, thought video/audio with other clients would have > to be reversed engineerd and shit like that. > Hey a person can dream right. Hi, You should read the roadmap: http://wiki.ekiga.org/index.php/Roadmap_to_3.00 Or have a look by yourself: http://wiki.ekiga.org/index.php/Image:Capture-Ekiga-SVN.png Or even better, help coding it! Regards, Yannick > > michel memeteau wrote: > > > > > > 2007/7/24, wo laoye >: > > > > the ekiga community is very inactive. most of them are not online > > most of the time. > > > > will ekiga ever be as popular as skype? > > > > > > Funny question ! You are one of the guys that can make it popular , > > we all are ... > > > > -- > > http://wlaoye.no-ip.biz > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > -- > > %<------------------------------------------------------->% > > Michel memeteau > > VOIP | Visio: sip:freechelmi at gizmoproject.com > > > > Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 > > Mobile : 0624808051 > > jabber/GoogleTalk : freechelmi at jabber.fr > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Tue Jul 24 22:02:18 2007 From: sevmek at free.fr (yannick) Date: Wed, 25 Jul 2007 00:02:18 +0200 Subject: [Ekiga-list] Registration and set-up should be more intuitive... In-Reply-To: <1185304579.6043.43.camel@roman-desktop> References: <1185304579.6043.43.camel@roman-desktop> Message-ID: <1185314538.13693.45.camel@achille> Le mardi 24 juillet 2007 ? 21:16 +0200, Roman Antensteiner a ?crit : > While I agree, it's not that difficult to understand - a friend and I > both had exactly the same problems setting things up. > > After you go through the installation process, you kind of assume that > you are getting registered, unless you read the small print carefully. > It would be nice if it was really clear that you are giving the > information to connect to an existing account, and not registering a new > one. I know it's there, but it should be shorter and clearer. Most > people don't read those things, and very likely you won't either. You > assume certain things. When I get asked for my full name, then username > and password - I assume I'm getting registered. Because I have never > encountered a log-in so far that asked me for anything besides Username > and Password. I wouldn't even point that out if my friend didn't fall > for the same fallacy a day later. I would suggest a short line like "If > you do NOT have an Ekiga Account yet, click HERE to register" Above the > fields where you enter your user information. > > Secondly, I believe I had to go into the Account settings to adjust the > settings after registration. They weren't set correctly by the druid. > And If someone, like me, never used SIP VOIP services, you cannot > possibly know what a "Registrar" Is supposed to be. After you have > registered it should say clearly what goes where in the account > settings. > For the 3.0 version registration will do in Ekiga. No more web interface necessary. > I am usually not nearly as picky with any other program, but since the > purpose of this program is to communicate with people, I want to be able > to tell my friends to install and register, without having to provide > them with the necessary information about SIP services. > > Also, a test call should be implemented. I've read on a couple of sites > "I've tried the ekiga test call..." But I couldn't find the address. > Anyway, it should be in the contacts by default. It's rather tedious to > find out if the audio settings are correct by calling someone. > The test number is sip:500 at ekiga.net I hope it will be integrated into Ekiga too. Your suggestion seems a good idea to me. Regards, Yannick > I know this is a lot of criticism for one post. Please don't take it the > wrong way. I'm very excited that there is a native VOIP client for > gnome, and I had less trouble with it so far then I did with Open Wengo. > But the points I've listed are really mundane, and would make a big > difference in my opinion. > > thanks for your time, > Roman A. > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From sevmek at free.fr Tue Jul 24 22:07:34 2007 From: sevmek at free.fr (yannick) Date: Wed, 25 Jul 2007 00:07:34 +0200 Subject: [Ekiga-list] Conference room status In-Reply-To: <46A65D31.40401@schinagl.nl> References: <46A65D31.40401@schinagl.nl> Message-ID: <1185314854.13693.50.camel@achille> Le mardi 24 juillet 2007 ? 16:12 -0400, Oliver Schinagl a ?crit : > Hi, i was just wondering what the status is on converencing with ekiga > these days. > > I know you can 'dial' into a preset server/channels, but does this work > 'dumb user mode' too? I hate to bring up skype, but I'm thinking, right > click user, invite to converence. A simple message could be sent to the > user to join channel number XXX with pin YYY. > I'm not sure how far the softphone (Ekiga) will integrate into the service (ekiga.net)... But thanks you to share. > Also does ekiga work with video conference aswell? E.g. have more then 2 > users see eachother via webcams? As that would be a 'killer feature' for > ekiga. I know you can't just host rooms for video aswell, as it al costs > a lot of bandwidth, and I know ekiga can't build mini servers into their > apps, like skype does, cause i belive it's an outrage that they do that. > An MCU can do this ; but it seems there is no good free software MCU as now. (the more promising seems to be openMCU). In shot a MCU is a piece of software which will mix/pick up the video to send it back to the participants. Regards, Yannick > Anyway, just sharing a few thoughts/questions. > > Oliver > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From oliver at schinagl.nl Tue Jul 24 22:09:04 2007 From: oliver at schinagl.nl (Oliver Schinagl) Date: Tue, 24 Jul 2007 18:09:04 -0400 Subject: [Ekiga-list] ekiga community In-Reply-To: <1185314377.13693.42.camel@achille> References: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> <46A66618.1090101@schinagl.nl> <1185314377.13693.42.camel@achille> Message-ID: <46A67880.1000102@schinagl.nl> ok that pic looks good :) yannick wrote: > Le mardi 24 juillet 2007 ? 16:50 -0400, Oliver Schinagl a ?crit : > >> My personal thought, no, never. Atleast the way I know/work with it not. >> What ekiga is laking is a 'buddy list'. People like that, people want that. >> So what you'd want is incorporate the video/voice capabilities of ekiga >> in to pidgin. Then you have something that has a chance to compete with >> skype. Add a whitelist directory and your good to go. >> 1 client to do it all, thought video/audio with other clients would have >> to be reversed engineerd and shit like that. >> Hey a person can dream right. >> > > Hi, > > You should read the roadmap: > http://wiki.ekiga.org/index.php/Roadmap_to_3.00 > > Or have a look by yourself: > http://wiki.ekiga.org/index.php/Image:Capture-Ekiga-SVN.png > > Or even better, help coding it! > > Regards, > Yannick > > >> michel memeteau wrote: >> >>> 2007/7/24, wo laoye >: >>> >>> the ekiga community is very inactive. most of them are not online >>> most of the time. >>> >>> will ekiga ever be as popular as skype? >>> >>> >>> Funny question ! You are one of the guys that can make it popular , >>> we all are ... >>> >>> -- >>> http://wlaoye.no-ip.biz >>> _______________________________________________ >>> ekiga-list mailing list >>> ekiga-list at gnome.org >>> http://mail.gnome.org/mailman/listinfo/ekiga-list >>> >>> >>> >>> >>> -- >>> %<------------------------------------------------------->% >>> Michel memeteau >>> VOIP | Visio: sip:freechelmi at gizmoproject.com >>> >>> Fixe : 0491886375 !!! APARTIR du 15/09/2007 -> 0811956494 >>> Mobile : 0624808051 >>> jabber/GoogleTalk : freechelmi at jabber.fr >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> ekiga-list mailing list >>> ekiga-list at gnome.org >>> http://mail.gnome.org/mailman/listinfo/ekiga-list >>> >> _______________________________________________ >> ekiga-list mailing list >> ekiga-list at gnome.org >> http://mail.gnome.org/mailman/listinfo/ekiga-list >> >> From simon at mungewell.org Wed Jul 25 01:56:59 2007 From: simon at mungewell.org (Simon Wood) Date: Tue, 24 Jul 2007 19:56:59 -0600 Subject: [Ekiga-list] ekiga community In-Reply-To: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> References: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> Message-ID: <20070724195659.a704860b.simon@mungewell.org> Strange comment indeed.... Ekiga (the service) as just an off shoot of Ekiga (the application), set up so that people have a choice of a free 'dial tone' provider. If you considered Ekiga as just one of many SIP providers you could argue that there are more SIP/H323 users in the world than Skype users. I can probably call more destinations via SIP than I could via the Skype network. Will it every be as 'popular' as Skype? Probably not, but then its not propriatory so it gets my 'vote'. Simon. On Tue, 24 Jul 2007 22:30:17 +0800 "wo laoye" wrote: > the ekiga community is very inactive. most of them are not online most of > the time. > > will ekiga ever be as popular as skype? > > > -- > http://wlaoye.no-ip.biz > From jan.schampera at web.de Wed Jul 25 04:00:41 2007 From: jan.schampera at web.de (Jan Schampera) Date: Wed, 25 Jul 2007 06:00:41 +0200 Subject: [Ekiga-list] ekiga community In-Reply-To: <46A67880.1000102@schinagl.nl> References: <5007cebf0707240730p1c2e82balb8a5dba576783f65@mail.gmail.com> <46A66618.1090101@schinagl.nl> <1185314377.13693.42.camel@achille> <46A67880.1000102@schinagl.nl> Message-ID: <20070725060041.1936fb90@mainserver.home.thebonsai.de> On Tue, 24 Jul 2007 18:09:04 -0400 Oliver Schinagl wrote: > ok that pic looks good :) But also remember that the service you're using needs SIP presence support (ekiga.net doesn't for now). The presence code is in CVS since longer. And the basic UI of the roster (buddy list) is even longer (I don't remember when I commited it, but it's some time). J. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From jan.schampera at web.de Wed Jul 25 04:06:50 2007 From: jan.schampera at web.de (Jan Schampera) Date: Wed, 25 Jul 2007 06:06:50 +0200 Subject: [Ekiga-list] Registration and set-up should be more intuitive... In-Reply-To: <1185304579.6043.43.camel@roman-desktop> References: <1185304579.6043.43.camel@roman-desktop> Message-ID: <20070725060650.571563ea@mainserver.home.thebonsai.de> On Tue, 24 Jul 2007 21:16:19 +0200 Roman Antensteiner wrote: > Secondly, I believe I had to go into the Account settings to adjust > the settings after registration. They weren't set correctly by the > druid. And If someone, like me, never used SIP VOIP services, you > cannot possibly know what a "Registrar" Is supposed to be. That's a very big problem, indeed. Every SIP provider gives different names to these values. Registrar, SIP Server, SIP Service, SIP Machine (seen so far). If you take other words, then the problem will be the same, just under another name. I remember there was a Bugzilla entry about that, I just can't find it. J. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From jan.schampera at web.de Wed Jul 25 04:12:29 2007 From: jan.schampera at web.de (Jan Schampera) Date: Wed, 25 Jul 2007 06:12:29 +0200 Subject: [Ekiga-list] Conference room status In-Reply-To: <46A65D31.40401@schinagl.nl> References: <46A65D31.40401@schinagl.nl> Message-ID: <20070725061229.4d3b99f6@mainserver.home.thebonsai.de> On Tue, 24 Jul 2007 16:12:33 -0400 Oliver Schinagl wrote: > Hi, i was just wondering what the status is on converencing with ekiga > these days. > > I know you can 'dial' into a preset server/channels, but does this > work 'dumb user mode' too? I hate to bring up skype, but I'm > thinking, right click user, invite to converence. A simple message > could be sent to the user to join channel number XXX with pin YYY. I don't think it's good do bind one specific provider into a generic SIP application. The conference rooms are nothing Ekiga really is aware of. They are provided by the SER on ekiga.net. If you use ekiga.net as provider - you have them. If not, you don't. Nothing Ekiga can control. Maybe something to solve with plugins...? Julien? > Also does ekiga work with video conference aswell? E.g. have more > then 2 users see eachother via webcams? As that would be a 'killer > feature' for ekiga. I know you can't just host rooms for video > aswell, as it al costs a lot of bandwidth, and I know ekiga can't > build mini servers into their apps, like skype does, cause i belive > it's an outrage that they do that. You'd need a video conference service somewhere. Ekiga.net doesn't have one, but since there are thousands of SIP providers, I bet there are some with this feature. Beside that, I wonder what the standards say about multiple video calls related to each other - will wait for Damien :-) J. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From netmaxd at gmail.com Thu Jul 26 12:50:47 2007 From: netmaxd at gmail.com (netmaxd) Date: Thu, 26 Jul 2007 08:50:47 -0400 Subject: [Ekiga-list] How to put the Ekiga button in your Thunderbird signature? Message-ID: <46A898A7.5030004@gmail.com> Hi All ! How to put the Ekiga button in your Thunderbird signature? Visit Ekiga wiki: English http://wiki.ekiga.org/index.php/Ekiga.net_VoIP_service_subscription#How_to_put_the_Ekiga_button_in_your_Thunderbird_signature.3F French http://forum.kubuntu-fr.org/viewtopic.php?id=136011 Thank and Good Day ! -- From trick at vanstaveren.us Fri Jul 27 00:30:11 2007 From: trick at vanstaveren.us (Patrick van Staveren) Date: Fri, 27 Jul 2007 01:30:11 +0100 Subject: [Ekiga-list] STUN troubles? Message-ID: <1185496211.17702.24.camel@localhost> Howdy folks, I've never used Ekiga before, but have been travelling for GUADEC and wanted to get pc-to-phone set up while I'm overseas. So I got it set up with diamond card, and figured I was all good to go. Then I started to fight with the (seemingly common beast) that is connecting over SIP. I first was using the Ekiga STUN server, and it took quite a while to connect to the echo test number -- about 60 seconds. I didn't make much of this; I just figured it was slow. Then I tried making actual phone calls with diamond card, but by the time the phone rang and I picked it up, it had already disconnected on the phone end and Ekiga hadn't even shown a connection yet. After a few more seconds, it would finally connect, but the actual land line would have disconnected. So then I did a quick port forward (on a foreign router) to allow UDP 5000-5100 thru. And now it works like a charm! Connections rarely take more than a second to connect, and I actually hear the introduction at the start of the Ekiga echo test. Essentially, it seems that with STUN, the connection actually happens almost immediately, but Ekiga doesn't actually recognize the connection for another 50-60 seconds. Are there any good reasons why STUN would work, but react horribly slow like this? It's a decently fast internet connection (8mbit/384kbit). My laptop is slow (pentium 3) but it doesn't appear to be suffering from any extensive load. Any ideas? Cheers, Patrick van Staveren From jan.schampera at web.de Fri Jul 27 03:17:16 2007 From: jan.schampera at web.de (Jan Schampera) Date: Fri, 27 Jul 2007 05:17:16 +0200 Subject: [Ekiga-list] STUN troubles? In-Reply-To: <1185496211.17702.24.camel@localhost> References: <1185496211.17702.24.camel@localhost> Message-ID: <20070727051716.4e0899c2@mainserver.home.thebonsai.de> On Fri, 27 Jul 2007 01:30:11 +0100 Patrick van Staveren wrote: > Essentially, it seems that with STUN, the connection actually happens > almost immediately, but Ekiga doesn't actually recognize the > connection for another 50-60 seconds. STUN is used to determinate the addresses Ekiga "announces" as reachability in the packets. Primarily Ekiga finds its own NAT type (if any) and the public IP of the NAT gateway with it. It depends on your setup if STUN is the right choice or not, using STUN and doing external stuff to the packet's contents might give trouble. To be sure one might need a packet-plot of such a connection. J. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From coolrunnings at paradise.net.nz Mon Jul 30 01:24:29 2007 From: coolrunnings at paradise.net.nz (Gary & Maryanne) Date: Mon, 30 Jul 2007 13:24:29 +1200 Subject: [Ekiga-list] ekiga call security check Message-ID: <46AD3DCD.8010503@paradise.net.nz> Hi I have set up ekiga on my computer and can make a test call which functions correctly. However when I call another address I get the following message Security check failed and the call hangs up Can anyone help me Maryanne -------------- next part -------------- An HTML attachment was scrubbed... URL: From fisico.manuel at gmail.com Mon Jul 30 02:56:10 2007 From: fisico.manuel at gmail.com (Manuel Morales) Date: Sun, 29 Jul 2007 21:56:10 -0500 Subject: [Ekiga-list] Ekiga is not scaling the image of my webcam Message-ID: <200707292156.10688.fisico.manuel@gmail.com> Hello The section 7.1.2 of Ekiga FAQ http://www.ekiga.org/index.php?rub=3&pos=0&faqpage=x201.html#AEN217 explains very well my problem: "7.1.2. Ekiga only displays a part of the real picture in the video window, what can I do? If your driver doesn't natively support 176x144, Ekiga will try capturing at a larger size, and scale the picture down. If the picture isn't scaled, please report the problem to us on the mailing list. " Ekiga is not scaling the image of my web cam ?What es the solution of this problem? My distro is PCLinuxOS and my Webcam is a Quick Cam Logitech for Notebooks http://www.logitech.com/index.cfm/webcam_communications/webcams/devices/219&cl=mx,es I am using the drivers dkms-gspcav (for spca5xx webcams), and x11-driver-video-v4l. Thanks for your answers Manuel From jan.schampera at web.de Mon Jul 30 07:48:16 2007 From: jan.schampera at web.de (Jan Schampera) Date: Mon, 30 Jul 2007 09:48:16 +0200 Subject: [Ekiga-list] ekiga call security check In-Reply-To: <46AD3DCD.8010503@paradise.net.nz> References: <46AD3DCD.8010503@paradise.net.nz> Message-ID: <20070730094816.0bb1c6fa@mainserver.home.thebonsai.de> On Mon, 30 Jul 2007 13:24:29 +1200 Gary & Maryanne wrote: > Hi > I have set up ekiga on my computer and can make a test call which > functions correctly. However when I call another address I get the > following message > > Security check failed and the call hangs up > > Can anyone help me > > Maryanne Define "make a test call" and "call another address", please. J. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From jan.schampera at web.de Mon Jul 30 07:50:31 2007 From: jan.schampera at web.de (Jan Schampera) Date: Mon, 30 Jul 2007 09:50:31 +0200 Subject: [Ekiga-list] Ekiga is not scaling the image of my webcam In-Reply-To: <200707292156.10688.fisico.manuel@gmail.com> References: <200707292156.10688.fisico.manuel@gmail.com> Message-ID: <20070730095031.4b627c86@mainserver.home.thebonsai.de> On Sun, 29 Jul 2007 21:56:10 -0500 Manuel Morales wrote: > Ekiga is not scaling the image of my web cam > > ?What es the solution of this problem? > > My distro is PCLinuxOS and my Webcam is a Quick Cam Logitech for > Notebooks > http://www.logitech.com/index.cfm/webcam_communications/webcams/devices/219&cl=mx,es > > I am using the drivers dkms-gspcav (for spca5xx webcams), and > x11-driver-video-v4l. > Hi Manuel, the deeper reason for your problem is, that your driver does NOT tell that there is no support for that resolution. It tells everything is okay but it sends a cropped picture. Ekiga can't see the difference of a faked resolution and a real resolution, of course. Maybe Luc has some further comments about it. J. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From coolrunnings at paradise.net.nz Mon Jul 30 08:25:42 2007 From: coolrunnings at paradise.net.nz (Gary & Maryanne) Date: Mon, 30 Jul 2007 20:25:42 +1200 Subject: [Ekiga-list] ekiga call security check In-Reply-To: <20070730094816.0bb1c6fa@mainserver.home.thebonsai.de> References: <46AD3DCD.8010503@paradise.net.nz> <20070730094816.0bb1c6fa@mainserver.home.thebonsai.de> Message-ID: <46ADA086.7040708@paradise.net.nz> a test call being the ekiga address sip:500 at ekiga.net which tests for connectivity and another address being another ekiga address thanks Gary Jan Schampera wrote: > On Mon, 30 Jul 2007 13:24:29 +1200 > Gary & Maryanne wrote: > > >> Hi >> I have set up ekiga on my computer and can make a test call which >> functions correctly. However when I call another address I get the >> following message >> >> Security check failed and the call hangs up >> >> Can anyone help me >> >> Maryanne >> > > Define "make a test call" and "call another address", please. > > J. > > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From mcs1 at ntlworld.com Mon Jul 30 08:45:18 2007 From: mcs1 at ntlworld.com (Michael Stockenhuber) Date: Mon, 30 Jul 2007 09:45:18 +0100 (BST) Subject: [Ekiga-list] Ekiga is not scaling the image of my webcam In-Reply-To: <20070730095031.4b627c86@mainserver.home.thebonsai.de> References: <200707292156.10688.fisico.manuel@gmail.com> <20070730095031.4b627c86@mainserver.home.thebonsai.de> Message-ID: <22447700.431185785118697.OPEN-XCHANGE.WebMail.nobody@sam> Manuel, Same for me. I have asked the developer of the gspca driver Michel Xhaard for help, burt no reply yet. I will post if I find out more. Cheers Michael On Mon 30.07.2007 08:50, Jan Schampera wrote: >On Sun, 29 Jul 2007 21:56:10 -0500 >Manuel Morales wrote: > >>Ekiga is not scaling the image of my web cam >> >>?What es the solution of this problem? >> >>My distro is PCLinuxOS and my Webcam is a Quick Cam Logitech for >>Notebooks >>>>http://www.logitech.com/index.cfm/webcam_communications/webcams/devices/219&cl=mx,es >> >>I am using the drivers dkms-gspcav (for spca5xx webcams), and >>x11-driver-video-v4l. >> > >Hi Manuel, > >the deeper reason for your problem is, that your driver does NOT tell >that there is no support for that resolution. It tells everything is >okay but it sends a cropped picture. Ekiga can't see the difference of >a faked resolution and a real resolution, of course. > >Maybe Luc has some further comments about it. > >J. Powered by Open-Xchange.com From jan.schampera at web.de Mon Jul 30 09:42:07 2007 From: jan.schampera at web.de (Jan Schampera) Date: Mon, 30 Jul 2007 11:42:07 +0200 Subject: [Ekiga-list] ekiga call security check In-Reply-To: <46ADA086.7040708@paradise.net.nz> References: <46AD3DCD.8010503@paradise.net.nz> <20070730094816.0bb1c6fa@mainserver.home.thebonsai.de> <46ADA086.7040708@paradise.net.nz> Message-ID: <20070730114207.25f932e9@mainserver.home.thebonsai.de> On Mon, 30 Jul 2007 20:25:42 +1200 Gary & Maryanne wrote: > a test call being the ekiga address > sip:500 at ekiga.net > which tests for connectivity > > and another address being another ekiga address That's weird. Any hints in the logs that your registration didn't succeed ("General History")? Maybe also a copy of ekiga's -d 4 (commandline switch) output is useful. J. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From jan.schampera at web.de Mon Jul 30 10:02:02 2007 From: jan.schampera at web.de (Jan Schampera) Date: Mon, 30 Jul 2007 12:02:02 +0200 Subject: [Ekiga-list] Diamondcard; Was: Fw: Welcome to Ekiga.net! Message-ID: <20070730120202.658b23b5@mainserver.home.thebonsai.de> Begin forwarded message: Date: Mon, 30 Jul 2007 09:42:27 +0200 From: "Ekiga.net Accounts Team" To: Najeeb Khawaja Cc: "Ekiga.net Accounts Team" , Ekiga mailing list Subject: Re: Welcome to Ekiga.net! On Sun, 29 Jul 2007 21:18:16 -0700 (PDT) Najeeb Khawaja wrote: > Step 1: Open the PC-To-Phone configuration window from the Tools menu > and purchase an account. You absolutely need to purchase the account > from the PC-To-Phone configuration window or it won?t work. > ? Step 2: Wait for the mail that will give you a login and a PIN. > ? Step 3: Enter that login and PIN in the appropriate fields in the > window and enable the PC-To-Phone service. > > you are charging for a service that I can get for FREE! > > NO THANKS Then don't do it. I'm sure you read carefully and saw that the PC2Phone "feature" is nothing essential you need to work with. If you don't need it, then don't use it. Ther are many free SIP providers around, the application Ekiga is *not* bound to any of them, even if the druid ("ekiga.net" as provider) or some extra window ("diamondcard.us" as provider) help to configure it. Where's your actual problem? If you need help in "not clicking something you do not need", then this is the wrong address to ask for. If you know a SIP provider that routes calls to PSTN, without taking one cent for it, then other users may be interested in and you could announce it on some mailinglist. Summary of the above: Ekiga (the application) itself is a normal configurable softphone and doesn't care at all which SIP providers you configure there. It is not bound to any specific provider. Please direct possible further notes about Ekiga to the Ekiga user mailing list, the email address you just wrote to is a technical support address for ekiga.net (a SIP provider), not for Ekiga (the application). I'll CC the list. -- Best regards, Jan Schampera Ekiga.net accounts team -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From sevmek at free.fr Mon Jul 30 10:25:17 2007 From: sevmek at free.fr (yannick) Date: Mon, 30 Jul 2007 12:25:17 +0200 Subject: [Ekiga-list] Ekiga and freephonie.net (free.fr SIP service) Message-ID: <1185791117.6152.8.camel@achille> Hi, As some french users may already know, the french ISP free.fr has a SIP service builtin and lately added some new protection feature breaking the SIP standard, thus rendering Ekiga unusable. This has been worked by the dev and thanks to them, Ekiga is now again compatible with this service: I just tested last development snapshot of Ekiga and I've been able to place a call to a landline phone. I also tested the last stable release 2.0.9 and it didn't work. Thus I pretty sure I have the problem and the SVN version solve it :) Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net Logiciel de VoIP Ekiga : http://www.ekiga.org http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F From ddouxcha at is.naist.jp Tue Jul 31 09:36:46 2007 From: ddouxcha at is.naist.jp (Damien Douxchamps) Date: Tue, 31 Jul 2007 18:36:46 +0900 Subject: [Ekiga-list] BUG: Cropped video with Logitec camera Message-ID: <1185874606.5505.21.camel@spiff> Hi all, First post, so I have to start by thanking the developers for Ekiga! Then my little bug... I'm trying to use Ekiga with a Logitec camera but I can only see a centered crop of the full image. effectv works and display 320x240. Xawtv works too, but returns an error before displaying the video: ioctl: VIDIOCMCAPTURE(frame=0;height=144;width=176;format=7): Invalid argument So my guess is that my camera does not support 144x176. The FAQ says that in that case Ekiga falls back to a higher resolution and scales down, but what I observe is a crop. More information about my system: Webcam: Logitec Qcam for Notebook Distro: Ubuntu Feisty, up to date. Kernel: Linux spiff 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux lsusb: Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 003: ID 046d:08d8 Logitech, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 If there's any information or test I should do please let me know. -- _ Damien ?? Douxchamps ('- Assistant Professor //\ Image Processing Laboratory, NAIST V_/_ http://damien.douxchamps.net/ From jpuydt at free.fr Tue Jul 31 11:31:15 2007 From: jpuydt at free.fr (Julien Puydt) Date: Tue, 31 Jul 2007 13:31:15 +0200 Subject: [Ekiga-list] BUG: Cropped video with Logitec camera In-Reply-To: <1185874606.5505.21.camel@spiff> References: <1185874606.5505.21.camel@spiff> Message-ID: <46AF1D83.9080307@free.fr> Damien Douxchamps a ?crit : > Hi all, > > First post, so I have to start by thanking the developers for Ekiga! > > Then my little bug... > > I'm trying to use Ekiga with a Logitec camera but I can only see a > centered crop of the full image. effectv works and display 320x240. > Xawtv works too, but returns an error before displaying the video: > > ioctl: VIDIOCMCAPTURE(frame=0;height=144;width=176;format=7): Invalid argument > > So my guess is that my camera does not support 144x176. The FAQ says > that in that case Ekiga falls back to a higher resolution and scales > down, but what I observe is a crop. > > More information about my system: This should be in the FAQ : Ekiga falls back to a higher resolution and scales down... but only if the driver returns an error code! If the driver doesn't support the resolution, but still returns it's ok, then crops... then ekiga has no way to know something wrong happens! So the bug is in the driver, which by not being honest, prevents ekiga from properly handling the situation. Snark on #ekiga From me at saurocesaretti.com Tue Jul 31 14:21:45 2007 From: me at saurocesaretti.com (Sauro Cesaretti) Date: Tue, 31 Jul 2007 16:21:45 +0200 Subject: [Ekiga-list] Information about ekiga Message-ID: <010f01c7d37e$1fc172a0$2101a8c0@sauro> Hello, I'm blind person and I'd like to use a softphone from text console without using gnome. Is there any version of ekiga that works in text mode? If no,can you give me advices to do that? thanks for all in advance best regards, Sauro -------------- next part -------------- An HTML attachment was scrubbed... URL: From jpuydt at free.fr Tue Jul 31 15:03:03 2007 From: jpuydt at free.fr (Julien Puydt) Date: Tue, 31 Jul 2007 17:03:03 +0200 Subject: [Ekiga-list] Information about ekiga In-Reply-To: <010f01c7d37e$1fc172a0$2101a8c0@sauro> References: <010f01c7d37e$1fc172a0$2101a8c0@sauro> Message-ID: <46AF4F27.1000700@free.fr> Sauro Cesaretti a ?crit : > I'm blind person and I'd like to use a softphone from text console without using gnome. > Is there any version of ekiga that works in text mode? Not yet. > If no,can you give me advices to do that? Here is a list of programs which work with ekiga -- perhaps one does what you want : http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F Snark on #ekiga From palos at post.sk Tue Jul 31 14:31:18 2007 From: palos at post.sk (Palo S.) Date: 31 Jul 2007 16:31:18 +0200 (CEST) Subject: [Ekiga-list] Information about ekiga Message-ID: <46AF47B6.000001.13922@kamasutra> Linphone (http://www.linphone.org/index.php/eng) should have command line interface called linphonec (manual at http://www.penguin-soft.com/penguin/man/1/linphonec.html). I don\'t use it regurarly but I tried it some 2-3 years ago and it worked. ----- Origin?lna Spr?va ----- Od: Julien Puydt Komu: Ekiga mailing list Poslan?: 31.07.2007 17:03 Predmet: Re: [Ekiga-list] Information about ekiga > Sauro Cesaretti a ?crit : > > I\'m blind person and I\'d like to use a softphone from text console without using gnome. > > Is there any version of ekiga that works in text mode? > > Not yet. > > > If no,can you give me advices to do that? > > Here is a list of programs which work with ekiga -- perhaps one does > what you want : > http://wiki.ekiga.org/index.php/Which_programs_work_with_Ekiga_%3F > > Snark on #ekiga > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > __________ Sprievodca hern?m svetom - http://hry.sme.sk/ From jpuydt at free.fr Tue Jul 31 19:34:21 2007 From: jpuydt at free.fr (Julien Puydt) Date: Tue, 31 Jul 2007 21:34:21 +0200 Subject: [Ekiga-list] Information about ekiga In-Reply-To: <46AF4F27.1000700@free.fr> References: <010f01c7d37e$1fc172a0$2101a8c0@sauro> <46AF4F27.1000700@free.fr> Message-ID: <46AF8EBD.8090300@free.fr> Julien Puydt a ?crit : > Sauro Cesaretti a ?crit : >> I'm blind person and I'd like to use a softphone from text console without using gnome. >> Is there any version of ekiga that works in text mode? > > Not yet. Let me tell more : ekiga is being refactored, which should make it easier to give it different user interfaces ; however, there is no direct plan to write a text interface -- nor different interfaces : the goal is to open the door for the future. That being said, are there known good and/or known bad text user interface libraries? For example, does CDK give good things ? Snark on #ekiga From pp at ieee.org Mon Jul 16 20:13:10 2007 From: pp at ieee.org (Paolo) Date: Mon, 16 Jul 2007 20:13:10 -0000 Subject: [Ekiga-list] problem with 120 Spacecam In-Reply-To: References: Message-ID: <20070716201232.GB3915@localhost> On Mon, Jul 16, 2007 at 11:29:58AM -0400, ekiga-list-request at gnome.org wrote: > Thanks for the speedy answer, David. I'm not really sure about the > relation between the spca5xx and the sn9c102 modules. Anway, I can give sn9c102 is 'the' driver for that chip, however spca5xx may be more updated and support more feat.s. > it a try. Is the best way to prevent it from loading to remove > sn9c102.ko from the lib/modules/2.6.18-4-686/modules.dep file? I think there are polite way of doing it, but I'm used to be rough here: # mv sn9c102.ko sn9c102.ko~ -- paolo From accounts at ekiga.net Mon Jul 30 07:42:40 2007 From: accounts at ekiga.net (Ekiga.net Accounts Team) Date: Mon, 30 Jul 2007 07:42:40 -0000 Subject: [Ekiga-list] Welcome to Ekiga.net! In-Reply-To: <44262.91664.qm@web50611.mail.re2.yahoo.com> References: <44262.91664.qm@web50611.mail.re2.yahoo.com> Message-ID: <20070730094227.6f131c85@mainserver.home.thebonsai.de> On Sun, 29 Jul 2007 21:18:16 -0700 (PDT) Najeeb Khawaja wrote: > Step 1: Open the PC-To-Phone configuration window from the Tools menu > and purchase an account. You absolutely need to purchase the account > from the PC-To-Phone configuration window or it won?t work. > ? Step 2: Wait for the mail that will give you a login and a PIN. > ? Step 3: Enter that login and PIN in the appropriate fields in the > window and enable the PC-To-Phone service. > > you are charging for a service that I can get for FREE! > > NO THANKS Then don't do it. I'm sure you read carefully and saw that the PC2Phone "feature" is nothing essential you need to work with. If you don't need it, then don't use it. Ther are many free SIP providers around, the application Ekiga is *not* bound to any of them, even if the druid ("ekiga.net" as provider) or some extra window ("diamondcard.us" as provider) help to configure it. Where's your actual problem? If you need help in "not clicking something you do not need", then this is the wrong address to ask for. If you know a SIP provider that routes calls to PSTN, without taking one cent for it, then other users may be interested in and you could announce it on some mailinglist. Summary of the above: Ekiga (the application) itself is a normal configurable softphone and doesn't care at all which SIP providers you configure there. It is not bound to any specific provider. Please direct possible further notes about Ekiga to the Ekiga user mailing list, the email address you just wrote to is a technical support address for ekiga.net (a SIP provider), not for Ekiga (the application). I'll CC the list. -- Best regards, Jan Schampera Ekiga.net accounts team From res3stockm at catalysis.at Mon Jul 9 12:49:40 2007 From: res3stockm at catalysis.at (Michael Stockenhuber) Date: Mon, 09 Jul 2007 12:49:40 -0000 Subject: [Ekiga-list] logitech messenger camera Message-ID: <24192593.251183985359235.OPEN-XCHANGE.WebMail.nobody@sam> Hi, I have got a logitech messenger webcam on debian testing (AMD64). I use the? gspca driver and the camera works fine using e.g., kopete. However, ekiga only shows a part of the picture. What I read this is a scaling problem (to get to lower resolution) and? the main web page? FAQ suggests to? post in the mailing list. Here we go......... Any help would be greatly appreciated. Cheers Michael Powered by Open-Xchange.com From res3stockm at catalysis.at Wed Jul 11 09:59:59 2007 From: res3stockm at catalysis.at (Michael Stockenhuber) Date: Wed, 11 Jul 2007 09:59:59 -0000 Subject: [Ekiga-list] logitech messenger camera In-Reply-To: <46949893.5040405@free.fr> References: <9144903.311184092416595.OPEN-XCHANGE.WebMail.nobody@sam> <41816.198.175.249.125.1184096993.squirrel@quetzal.cc> <46949893.5040405@free.fr> Message-ID: <4881910.331184147983947.OPEN-XCHANGE.WebMail.nobody@sam> Any suggestions on how to fix and/or get a different driver? Cheers Michael On Wed 11.07.2007 09:45, Julien Puydt wrote: >Steven R. Anderson a ?crit : >>On Tue, July 10, 2007 1:33 pm, Michael Stockenhuber wrote: > >>>I have got a logitech messenger webcam on debian testing (AMD64). I >>>use >>>the? gspca driver and the camera works fine using e.g., kopete. >>>However, >>>ekiga only shows a part of the picture. What I read this is a scaling >>>problem (to get to lower resolution) and? the main web page? FAQ >>>suggests to? post in the mailing list. > >>FYI, I have the same video problem when running Ekiga on Debian Etch - >>i386, using a 3-com HomeConnect USB camera. > >Kopete asks a width x height to the webcam's driver. >The webcam's driver is able to do that and replies "Ok". >Image is perfect! > >Ekiga asks another width x height to the driver. >The webcam's driver is unable to deliver that, so it should reply "I >can't", but instead, it replies "Ok". >Image is incorrect. > >Ekiga can't do anything : the driver has to be fixed not to lie : if >the >driver says "I can't", ekiga will try something else. > >Snark on #ekiga >_______________________________________________ >ekiga-list mailing list >ekiga-list at gnome.org >http://mail.gnome.org/mailman/listinfo/ekiga-list Powered by Open-Xchange.com From res3stockm at catalysis.at Sun Jul 22 06:34:50 2007 From: res3stockm at catalysis.at (Michael Stockenhuber) Date: Sun, 22 Jul 2007 06:34:50 -0000 Subject: [Ekiga-list] video comm test In-Reply-To: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> Message-ID: <13630585.401185086078141.OPEN-XCHANGE.WebMail.nobody@sam> What you see in the second window is your stream coming back from the server. It is just a little bit delayed. cheers Michael On Sun 22.07.2007 04:44, wo laoye wrote: >how to test video communication via 500 at ekiga.net? >In the View menu, I select Both(Side-by-Side). >I get two view, both from my camera only. > > > >-- >http://wlaoye.no-ip.biz Powered by Open-Xchange.com From oliver at are-b.org Mon Jul 23 01:42:11 2007 From: oliver at are-b.org (oliver) Date: Mon, 23 Jul 2007 01:42:11 -0000 Subject: [Ekiga-list] video comm test In-Reply-To: <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> Message-ID: <46A44FA9.2070500@are-b.org> and who would be on the other end? You could always pay someone i suppose to give you a strip show :p wo laoye wrote: > Thks, so it is a loop-back test. Why not have a camera at the other > end instead? > > > > On 7/22/07, *Michael Stockenhuber* < mcs1 at ntlworld.com > > wrote: > > What you see in the second window is your stream coming back from the > server. It is just a little bit delayed. > cheers > > Michael > > On Sun 22.07.2007 04:44, wo laoye wrote: > > >how to test video communication via 500 at ekiga.net > ? > >In the View menu, I select Both(Side-by-Side). > >I get two view, both from my camera only. > > > > > > > >-- > >http://wlaoye.no-ip.biz > Powered by Open-Xchange.com > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > -- > http://wlaoye.no-ip.biz > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From oliver at are-b.org Mon Jul 23 05:29:58 2007 From: oliver at are-b.org (oliver) Date: Mon, 23 Jul 2007 05:29:58 -0000 Subject: [Ekiga-list] video comm test In-Reply-To: <5007cebf0707222227t6ef3dc89r863c840a466e3c00@mail.gmail.com> References: <5007cebf0707212044h25d24017h2b17702d6e35b6e0@mail.gmail.com> <10140777.411185095576137.OPEN-XCHANGE.WebMail.nobody@sam> <5007cebf0707221835p4c79c8c8rc9ca97a944a5063@mail.gmail.com> <46A47E7A.2020601@schinagl.nl> <5007cebf0707222227t6ef3dc89r863c840a466e3c00@mail.gmail.com> Message-ID: <46A48510.5040807@are-b.org> the problem is, you' dhave to physically install a webcam on the server, which is usually run by a wbehosting provider (sourceforge) so that's impossible. Playing back a video would work, but wouldn't look 'as real'. Maybe overlay a video ontop of the received video before echoing back so you get your own image + something static. For money, I always strip! :p wo laoye wrote: > the camera can just be aimed at a still object, say, the ekiga logo. > This would be a form of advertisement for ekiga. > > or maybe a strip show by you Oliver? not necessary live, a recorded > one will do. :) > > > On 7/23/07, *Oliver Schinagl* > wrote: > > and who would be on the other end? > > You could always pay someone i suppose to give you a strip show :p > > wo laoye wrote: > > Thks, so it is a loop-back test. Why not have a camera at the other > > end instead? > > > > > > > > On 7/22/07, *Michael Stockenhuber* < mcs1 at ntlworld.com > > > >> wrote: > > > > What you see in the second window is your stream coming back > from the > > server. It is just a little bit delayed. > > cheers > > > > Michael > > > > On Sun 22.07.2007 04:44, wo laoye wrote: > > > > >how to test video communication via 500 at ekiga.net > > > >? > > >In the View menu, I select Both(Side-by-Side). > > >I get two view, both from my camera only. > > > > > > > > > > > >-- > > >http://wlaoye.no-ip.biz > > Powered by Open-Xchange.com > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > > > > > -- > > http://wlaoye.no-ip.biz > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > -- > http://wlaoye.no-ip.biz > ------------------------------------------------------------------------ > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list