From dsandras at seconix.com Fri Dec 1 09:06:13 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 01 Dec 2006 10:06:13 +0100 Subject: [Ekiga-list] STUN registration In-Reply-To: <200611292254.15814.Wolfram.Wagner@web.de> References: <200611292254.15814.Wolfram.Wagner@web.de> Message-ID: <1164963973.3570.10.camel@golgoth01> Hi, Le mercredi 29 novembre 2006 ? 22:54 +0100, Wolfram Wagner a ?crit : > Hello, > I ran into problems which could not be solved by myself... Maybe you > know quick answers. Manual, FAQ and Google have been checked > already ... > My setup: > I am connected to Internet via a Fritzbox Surf & Fon2+. It delivers > IP-Phone functions and blocks port forwarding to LAN of UDP 5060 to > 5063 because they are likely used by this device itself... > Not sure, but I would have thought a Fritzbox was able to play the role of a SIP outbound proxy. > I guess, this is one of my problems. > > But at first, I always get timeouts when I try to register. I double > checked my account and password on ekiga.net, then configured again and > sniffed the traffic, still finding a SIP 404 message (unknown user)... > A timeout is different from a 404. Please post a -d 4 output somewhere (pastebin.ca) so that we can analyze what the problem is. > A second problem is: I try to establish a connection to another ekiga in > standard setup. This works more or less as long as we use H.323. > Picture was fine, but voices have been heavily distorded. My partner is > sometimes reaching me in a Donald duck voice, high and much faster as > spoken and my voice comes in much slower and deeper... > We have already tried different codecs. If we turn of video, sound is > better most of the times. > Is this because bandwith is not high enough for audio? Restriction video > bandwith did not really help. It is most likely due to a problem with the ALSA libraries. Try to see on both sides if : arecord -D plughw:0,0 -c 1 -r 8000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE - and arecord -D plughw:0,0 -c 1 -r 16000 -f S16_LE - | aplay -D plughw:0,0 -c 1 -r 8000 -f S16_LE - Work as expected. If you are using the "Default" device in Ekiga, please try -D default instead of -D plughw:0,0 -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Fri Dec 1 09:06:38 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 01 Dec 2006 10:06:38 +0100 Subject: [Ekiga-list] Protocols and registering accounts In-Reply-To: <20061130173112.3a6100c1@localhost.localdomain> References: <200611301015.53042.cannewilson@tiscali.co.uk> <20061130173112.3a6100c1@localhost.localdomain> Message-ID: <1164963998.3570.12.camel@golgoth01> Le jeudi 30 novembre 2006 ? 17:31 +0100, Jan Schampera a ?crit : > On Thu, 30 Nov 2006 10:15:46 +0000 > Anne Wilson wrote: > > > I have registered an account at ekiga.net, which I intend to use to > > communicate with a friend using GnomeMeeting. However, I also want > > to communicate with a Win2K use, using NetMeeting. Will I need a > > separate h.323 account for this? If so, how do I get that? > > Regardless firewall nightmare: h323: > You can register to a so-called gatekeeper service, but I don't know a > public service in the dimensions of the common SIP services off from > head. > Maybe Damien knows one? No ;-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Fri Dec 1 09:07:21 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 01 Dec 2006 10:07:21 +0100 Subject: [Ekiga-list] Protocols and registering accounts In-Reply-To: <200611301709.21347.cannewilson@tiscali.co.uk> References: <200611301015.53042.cannewilson@tiscali.co.uk> <20061130173112.3a6100c1@localhost.localdomain> <200611301709.21347.cannewilson@tiscali.co.uk> Message-ID: <1164964041.3570.14.camel@golgoth01> Le jeudi 30 novembre 2006 ? 17:09 +0000, Anne Wilson a ?crit : > On Thursday 30 November 2006 16:31, Jan Schampera wrote: > > On Thu, 30 Nov 2006 10:15:46 +0000 > > > > Anne Wilson wrote: > > > I have registered an account at ekiga.net, which I intend to use to > > > communicate with a friend using GnomeMeeting. However, I also want > > > to communicate with a Win2K use, using NetMeeting. Will I need a > > > separate h.323 account for this? If so, how do I get that? > > > > Regardless firewall nightmare: > > I remember well that the main problem we had when we both used GnomeMeeting, > long ago, was a firewall problem. I'm not saying that I've got it right yet, > but I'm aware of it :-) > > > h323: > > That sounds easy enough. > > > You can register to a so-called gatekeeper service, > > > I don't realy understand where the gatekeeper service fits in. Any > recommended reading on that? > http://en.wikipedia.org/wiki/H.323_Gatekeeper -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Fri Dec 1 09:09:21 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 01 Dec 2006 10:09:21 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" In-Reply-To: <2c69e06d42064c579f22100d07aa6362@atlas.cz> References: <2c69e06d42064c579f22100d07aa6362@atlas.cz> Message-ID: <1164964161.3570.17.camel@golgoth01> Le jeudi 30 novembre 2006 ? 16:19 +0100, Roman Polach a ?crit : [..] > "ekiga -d 4" shows this: > > 2006/11/30 11:25:05.983 0:00.472 ekiga Detected audio plugins: ALSA > 2006/11/30 11:25:05.984 0:00.472 ekiga Detected video plugins: Picture,V4L,V4L2 > 2006/11/30 11:25:05.984 0:00.472 ekiga Detected audio plugins: ALSA > 2006/11/30 11:25:05.984 0:00.472 ekiga Detected video plugins: Picture,V4L,V4L2 > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following audio input devices: SB Live [Unknown],Default with plugin ALSA > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following audio output devices: SB Live [Unknown],Default with plugin ALSA > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following video input devices: StaticPicture,MovingLogo with plugin Picture > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following audio input devices: SB Live [Unknown],Default with plugin ALSA > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following audio output devices: SB Live [Unknown],Default with plugin ALSA > 2006/11/30 11:25:06.000 0:00.489 ekiga Detected the following video input devices: StaticPicture,MovingLogo with plugin Picture > > (ekiga:25369): gnome-vfs-modules-WARNING **: Could not initialize inotify > > 2006/11/30 11:25:06.917 0:01.406 ekiga Ekiga version 2.0.3 > 2006/11/30 11:25:06.926 0:01.415 ekiga OPAL version 2.2.3 > 2006/11/30 11:25:06.932 0:01.421 ekiga PWLIB version 1.10.2 > 2006/11/30 11:25:06.938 0:01.427 ekiga GNOME support enabled > 2006/11/30 11:25:06.944 0:01.432 ekiga Fullscreen support enabled > 2006/11/30 11:25:06.949 0:01.438 ekiga DBUS support enabled > 2006/11/30 11:25:06.960 0:01.449 ekiga Set TCP port range to 30000:30010 > 2006/11/30 11:25:06.968 0:01.457 ekiga Set RTP port range to 5000:5059 > 2006/11/30 11:25:06.976 0:01.465 ekiga Set UDP port range to 5060:5100 > > no other output is generated by the time message "Registration failed: Timeout" appears in statusbar of ekiga gui. It is unfortunately incomplete. There is a bug in the gentoo ebuild that prevents correct logging to operate, but we don't know which one. But are you sure that Ekiga is listening on the appropriate interface? Can you sniff the traffic on both routers and see what happens? Thanks, -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Fri Dec 1 09:22:05 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 01 Dec 2006 10:22:05 +0100 Subject: [Ekiga-list] =?iso-8859-1?q?=5BAnnounce=5D_=3A_Ekiga_Wins_the_=22?= =?iso-8859-1?q?Troph=E9es_du=09libre=22_Award?= Message-ID: <1164964925.3570.29.camel@golgoth01> Hello all, I am proud to announce that yesterday Ekiga won one of the Free Software Awards in Soissons. Ekiga was nominated in the "Multimedia" category. The jury appreciated the quality of the project and the fact that it was original (GnomeMeeting was the first Open Source GUI to support VoIP together with video and the H.323 standard on GNU/Linux in 2001). It is now the first Open Source application to support multiple VoIP protocols at the same time, again with audio and video. I would like to thank the organizers (http://www.cetril.org) for this award, and all the supporters and developers of the project. I would also like to thank my employer NOVACOM (http://www.novacom.be) for permitting me to work in the Open Source world. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From cannewilson at tiscali.co.uk Fri Dec 1 10:10:49 2006 From: cannewilson at tiscali.co.uk (Anne Wilson) Date: Fri, 1 Dec 2006 10:10:49 +0000 Subject: [Ekiga-list] Protocols and registering accounts In-Reply-To: <1164964041.3570.14.camel@golgoth01> References: <200611301015.53042.cannewilson@tiscali.co.uk> <200611301709.21347.cannewilson@tiscali.co.uk> <1164964041.3570.14.camel@golgoth01> Message-ID: <200612011010.49470.cannewilson@tiscali.co.uk> On Friday 01 December 2006 09:07, Damien Sandras wrote: > Le jeudi 30 novembre 2006 ? 17:09 +0000, Anne Wilson a ?crit : > > On Thursday 30 November 2006 16:31, Jan Schampera wrote: > > > On Thu, 30 Nov 2006 10:15:46 +0000 > > > > > > Anne Wilson wrote: > > > > I have registered an account at ekiga.net, which I intend to use to > > > > communicate with a friend using GnomeMeeting. However, I also want > > > > to communicate with a Win2K use, using NetMeeting. Will I need a > > > > separate h.323 account for this? If so, how do I get that? > > > > > > Regardless firewall nightmare: > > > > I remember well that the main problem we had when we both used > > GnomeMeeting, long ago, was a firewall problem. I'm not saying that I've > > got it right yet, but I'm aware of it :-) > > > > > h323: > > > > That sounds easy enough. > > > > > You can register to a so-called gatekeeper service, > > > > I don't realy understand where the gatekeeper service fits in. Any > > recommended reading on that? > > http://en.wikipedia.org/wiki/H.323_Gatekeeper Thanks for the link. Terminals which provide multimedia content using this protocol in the H.323 "zone" (e.g. Microsoft NetMeeting) are required to register "at the gate". The registration goes into effect, once the terminal provides its address. So, if I understand that correctly, the NetMeeting user will have to register with a gatekeeper, but not the Ekiga user calling him? The link gives an explanation of how it works, but once more there is no indication of who provides such a service. Since Damien says he doesn't know, I assume that I can forget it for now. Anne -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From dsandras at seconix.com Fri Dec 1 11:15:27 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 01 Dec 2006 12:15:27 +0100 Subject: [Ekiga-list] Protocols and registering accounts In-Reply-To: <200612011010.49470.cannewilson@tiscali.co.uk> References: <200611301015.53042.cannewilson@tiscali.co.uk> <200611301709.21347.cannewilson@tiscali.co.uk> <1164964041.3570.14.camel@golgoth01> <200612011010.49470.cannewilson@tiscali.co.uk> Message-ID: <1164971727.3570.51.camel@golgoth01> Le vendredi 01 d?cembre 2006 ? 10:10 +0000, Anne Wilson a ?crit : > > Thanks for the link. > > > Terminals which provide multimedia content using this protocol in the > H.323 "zone" (e.g. Microsoft NetMeeting) are required to register "at the > gate". The registration goes into effect, once the terminal provides its > address. > > > So, if I understand that correctly, the NetMeeting user will have to register > with a gatekeeper, but not the Ekiga user calling him? If you are using a gatekeeper, both of them will register to the gatekeeper and contact each other using the 'alias'. You have to add an H.323 account to register to a gatekeeper. If you are not using a gatekeeper, direct IP dialing is the only way to get in touch. You do not have to add an H.323 account if you are using direct IP dialing. > > The link gives an explanation of how it works, but once more there is no > indication of who provides such a service. Since Damien says he doesn't > know, I assume that I can forget it for now. > I guess so, I don't know any public service. Perhaps have a look on the excellent http://www.voxgratia.org, they were showing a Demo GK. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From bbagger at gmail.com Fri Dec 1 16:22:59 2006 From: bbagger at gmail.com (Bent Bagger) Date: Fri, 1 Dec 2006 17:22:59 +0100 Subject: [Ekiga-list] =?iso-8859-1?q?=5BAnnounce=5D_=3A_Ekiga_Wins_the_=22?= =?iso-8859-1?q?Troph=E9es_du_libre=22_Award?= In-Reply-To: <1164964925.3570.29.camel@golgoth01> References: <1164964925.3570.29.camel@golgoth01> Message-ID: <2e19719f0612010822j54d6f43bx9715d9b0638de7a5@mail.gmail.com> F?licitations! Vous l'avez bien m?rit?. Mes meilleures amiti?s, Bent From jan.schampera at web.de Fri Dec 1 17:27:06 2006 From: jan.schampera at web.de (Jan Schampera) Date: Fri, 1 Dec 2006 18:27:06 +0100 Subject: [Ekiga-list] =?iso-8859-15?q?=5BAnnounce=5D_=3A_Ekiga_Wins_the_?= =?iso-8859-15?q?=22Troph=E9es_du=09libre=22_Award?= In-Reply-To: <1164964925.3570.29.camel@golgoth01> References: <1164964925.3570.29.camel@golgoth01> Message-ID: <20061201182706.5ac9ffeb@localhost.localdomain> On Fri, 01 Dec 2006 10:22:05 +0100 Damien Sandras wrote: > I am proud to announce that yesterday Ekiga won one of the Free > Software Awards in Soissons. Ekiga was nominated in the "Multimedia" > category. > > The jury appreciated the quality of the project and the fact that it > was original (GnomeMeeting was the first Open Source GUI to support > VoIP together with video and the H.323 standard on GNU/Linux in > 2001). > > It is now the first Open Source application to support multiple VoIP > protocols at the same time, again with audio and video. > > I would like to thank the organizers (http://www.cetril.org) for this > award, and all the supporters and developers of the project. > > I would also like to thank my employer NOVACOM (http://www.novacom.be) > for permitting me to work in the Open Source world. Congratulations my friend! One more step to world domination ;-) J. -- Once you've got the perfect hammer, everything looks like a nail. From Wolfram.Wagner at web.de Fri Dec 1 19:57:00 2006 From: Wolfram.Wagner at web.de (Wolfram Wagner) Date: Fri, 1 Dec 2006 20:57:00 +0100 Subject: [Ekiga-list] STUN registration In-Reply-To: References: Message-ID: <200612012057.00659.Wolfram.Wagner@web.de> Hello Thanks for your quick answer! Am Freitag, 1. Dezember 2006 11:11 schrieb ekiga-list-request at gnome.org: > Message: 2 > Date: Fri, 01 Dec 2006 10:06:13 +0100 > From: Damien Sandras > Subject: Re: [Ekiga-list] STUN registration > To: Ekiga mailing list > Message-ID: <1164963973.3570.10.camel at golgoth01> > Content-Type: text/plain; charset=ISO-8859-15 > > Hi, > > Le mercredi 29 novembre 2006 ? 22:54 +0100, Wolfram Wagner a ?crit : > > Hello, > > I ran into problems which could not be solved by myself... Maybe you > > know quick answers. Manual, FAQ and Google have been checked > > already ... > > My setup: > > I am connected to Internet via a Fritzbox Surf & Fon2+. It delivers > > IP-Phone functions and blocks port forwarding to LAN of UDP 5060 to > > 5063 because they are likely used by this device itself... > > > > Not sure, but I would have thought a Fritzbox was able to play the role > of a SIP outbound proxy. > > > I guess, this is one of my problems. > > > > But at first, I always get timeouts when I try to register. I double > > checked my account and password on ekiga.net, then configured again and > > sniffed the traffic, still finding a SIP 404 message (unknown user)... > > > > A timeout is different from a 404. > > Please post a -d 4 output somewhere (pastebin.ca) so that we can analyze > what the problem is. I have posted it to http://pastebin.ca/263742 I see a 404 Error followed by a timeout when waitung for PDU. I have not enough insight to know what this means... Thanks for helping! Wolfram From flippolis at yahoo.com Fri Dec 1 20:57:52 2006 From: flippolis at yahoo.com (Fabrizio Lippolis) Date: Fri, 1 Dec 2006 20:57:52 +0000 (UTC) Subject: [Ekiga-list] calling phone with Ekiga using Voipbuster Message-ID: Hi list, I have found some simple instructions to register a Voipbuster account on your favourite softphone, I have tried with Ekiga and it works, though I still haven't tried to call anyone. Does anybody have experience in calling landline phones with Ekiga using Voipbuster? Thank you. Fabrizio From geboyd53 at comcast.net Sat Dec 2 03:29:46 2006 From: geboyd53 at comcast.net (George Boyd) Date: Fri, 01 Dec 2006 19:29:46 -0800 Subject: [Ekiga-list] calling phone with Ekiga using Voipbuster In-Reply-To: References: Message-ID: <1165030186.4173.3.camel@george> I use Ekiga with VoipBuster all the time and it works very well. I use it for "in country" (USA) as well as to foreign countries. I would like to use Diamond Card since they are associated with Ekiga, but unfortunately VoipBuster is less expensive. On Fri, 2006-12-01 at 20:57 +0000, Fabrizio Lippolis wrote: > Hi list, > > I have found some simple instructions to register a Voipbuster account on > your favourite softphone, I have tried with Ekiga and it works, though I > still haven't tried to call anyone. Does anybody have experience in > calling landline phones with Ekiga using Voipbuster? Thank you. > > Fabrizio > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From flippolis at yahoo.com Sat Dec 2 13:29:39 2006 From: flippolis at yahoo.com (Fabrizio Lippolis) Date: Sat, 2 Dec 2006 13:29:39 +0000 (UTC) Subject: [Ekiga-list] calling phone with Ekiga using Voipbuster References: <1165030186.4173.3.camel@george> Message-ID: Il Fri, 01 Dec 2006 19:29:46 -0800, George Boyd ha scritto: > I use Ekiga with VoipBuster all the time and it works very well. I use > it for "in country" (USA) as well as to foreign countries. To me it looks that Voipbuster is the less expensive provider I have found. Just not to go off topic, how do I call a phone with Ekiga using Voipbuster? Fabrizio From dsandras at seconix.com Sat Dec 2 13:40:15 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 02 Dec 2006 14:40:15 +0100 Subject: [Ekiga-list] STUN registration In-Reply-To: <200612012057.00659.Wolfram.Wagner@web.de> References: <200612012057.00659.Wolfram.Wagner@web.de> Message-ID: <1165066815.4817.5.camel@golgoth01> Le vendredi 01 d?cembre 2006 ? 20:57 +0100, Wolfram Wagner a ?crit : > I have posted it to http://pastebin.ca/263742 > > I see a 404 Error followed by a timeout when waitung for PDU. I have not > enough insight to know what this means... > The 404 is for the SUBSCRIBE (it is a normal behavior). The timeout is for the REGISTER. That means that : - the SUBSCRIBE reaches ekiga.net - the REGISTER, which is identical, doesn't reach ekiga.net OR the reply to the REGISTER doesn't reach your internal host Can you sniff the traffic on the routers to see what happens? I have the feeling that one of them is either dropping the REGISTER, or dropping the answer to the REGISTER or simply rewriting the REGISTER in such a way that the answer never reaches you... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From geboyd53 at comcast.net Sat Dec 2 14:44:00 2006 From: geboyd53 at comcast.net (George Boyd) Date: Sat, 02 Dec 2006 06:44:00 -0800 Subject: [Ekiga-list] calling phone with Ekiga using Voipbuster In-Reply-To: References: <1165030186.4173.3.camel@george> Message-ID: <1165070640.9553.46.camel@george> Just do the setup instructions that is on the Viopbusdter setup information. It you set voipbuster as your default account, then anytime you put in a telephone number in ekiga, it will default to using VoipBuster. If you use the voipbuster program for windoze the format is 0+country code+area code +number In the Us that would 001 for the country code. I discovered that if you use ekiga, you don't have to do all that, just put in the country code+area code +number. In my case it would just be 13606660349 with out the leading zeros. Ekiga somehow works it that way. And of course what ever other accounts you may have installed, you have to give it the full path, Ie: if you also have Diamong card or any other service accounts installed and VoipBuster is your default account, then you will have to give the full URl when you setup your phone book or enter it directly such as in my case with diamond card I can't just put the telephone number in because it would default to VoipBuster, so in that case I would have to enter +13606660349 at eugw.ast.diamondcard.us because it's not the default. The same principle applies to all of your accounts and if you are going to use sip, you would have to add "person"@ekiga .net. When you set an account as default, It's the same procedure whether it is Voipbuster or some thing else. It is very late here as I'm writing this, I hope I'm making enough sense that you will understand it. I'll be glad to help more if I can. Ekiga is the only program I have found that lets you cross over to so many different accounts. I f I'm not making any sense, please let me know and I'll try to explain it earlier in the day when my mind clearer and not so sleepy :) On Sat, 2006-12-02 at 13:29 +0000, Fabrizio Lippolis wrote: > Il Fri, 01 Dec 2006 19:29:46 -0800, George Boyd ha scritto: > > > I use Ekiga with VoipBuster all the time and it works very well. I use > > it for "in country" (USA) as well as to foreign countries. > > To me it looks that Voipbuster is the less expensive provider I have > found. Just not to go off topic, how do I call a phone with Ekiga using > Voipbuster? > > Fabrizio > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From cannewilson at tiscali.co.uk Sat Dec 2 18:51:54 2006 From: cannewilson at tiscali.co.uk (Anne Wilson) Date: Sat, 2 Dec 2006 18:51:54 +0000 Subject: [Ekiga-list] Protocols and registering accounts In-Reply-To: <1164971727.3570.51.camel@golgoth01> References: <200611301015.53042.cannewilson@tiscali.co.uk> <200612011010.49470.cannewilson@tiscali.co.uk> <1164971727.3570.51.camel@golgoth01> Message-ID: <200612021851.54469.cannewilson@tiscali.co.uk> On Friday 01 December 2006 11:15, Damien Sandras wrote: > Le vendredi 01 d?cembre 2006 ? 10:10 +0000, Anne Wilson a ?crit : > > Thanks for the link. > > > > > > Terminals which provide multimedia content using this protocol in the > > H.323 "zone" (e.g. Microsoft NetMeeting) are required to register "at the > > gate". The registration goes into effect, once the terminal provides its > > address. > > > > > > So, if I understand that correctly, the NetMeeting user will have to > > register with a gatekeeper, but not the Ekiga user calling him? > > If you are using a gatekeeper, both of them will register to the > gatekeeper and contact each other using the 'alias'. You have to add an > H.323 account to register to a gatekeeper. > > If you are not using a gatekeeper, direct IP dialing is the only way to > get in touch. You do not have to add an H.323 account if you are using > direct IP dialing. > > > The link gives an explanation of how it works, but once more there is no > > indication of who provides such a service. Since Damien says he doesn't > > know, I assume that I can forget it for now. > > I guess so, I don't know any public service. > Perhaps have a look on the excellent http://www.voxgratia.org, they were > showing a Demo GK. Thanks, Damien. I've bookmarked it for further study if it becomes necessary. Anne -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From frmas at free.fr Sun Dec 3 17:01:57 2006 From: frmas at free.fr (Francois Massonneau) Date: Sun, 3 Dec 2006 18:01:57 +0100 Subject: [Ekiga-list] Switch from FC5 to FC6 and my ekiga doesn't work anymore Message-ID: <200612031801.57512.frmas@free.fr> Hi, I've just switched from Fedora Core 5 to FC6, and now ekiga doesn't work anylonger. I've tried to find a version 2.03 for FC6 but I've not been successfull. Now when someone calls me, it rings, but after two or three rings, it hangs up as busy, and when I try to do the same, calling 500 at ekiga.net, it rings two or 3 times again, and it ends up as busy. I'm behind a router, but before FC6 it worked, and I didn't change anything in the router settings. Does someone have an idea ? Thank you in advance. Francois -- From dsandras at seconix.com Sun Dec 3 18:38:45 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 03 Dec 2006 19:38:45 +0100 Subject: [Ekiga-list] Switch from FC5 to FC6 and my ekiga doesn't work anymore In-Reply-To: <200612031801.57512.frmas@free.fr> References: <200612031801.57512.frmas@free.fr> Message-ID: <1165171125.3771.1.camel@golgoth01> Hi, Le dimanche 03 d?cembre 2006 ? 18:01 +0100, Francois Massonneau a ?crit : > Hi, > > I've just switched from Fedora Core 5 to FC6, and now ekiga doesn't work > anylonger. > I've tried to find a version 2.03 for FC6 but I've not been successfull. > Now when someone calls me, it rings, but after two or three rings, it hangs > up as busy, and when I try to do the same, calling 500 at ekiga.net, it rings > two or 3 times again, and it ends up as busy. > I'm behind a router, but before FC6 it worked, and I didn't change anything > in the router settings. > Does someone have an idea ? Thank you in advance. Francois > What does the -d 4 output tell? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From frmas at free.fr Sun Dec 3 18:40:13 2006 From: frmas at free.fr (Francois Massonneau) Date: Sun, 3 Dec 2006 19:40:13 +0100 Subject: [Ekiga-list] =?iso-8859-15?q?Switch_from_FC5_to_FC6_and_my_ekiga_?= =?iso-8859-15?q?doesn=27t_work=09anymore?= In-Reply-To: <1165171125.3771.1.camel@golgoth01> References: <200612031801.57512.frmas@free.fr> <1165171125.3771.1.camel@golgoth01> Message-ID: <200612031940.14961.frmas@free.fr> On Sunday 03 December 2006 19:38, Damien Sandras wrote: > Hi, > > Le dimanche 03 d?cembre 2006 ? 18:01 +0100, Francois Massonneau a > > ?crit : > > Hi, > > > > I've just switched from Fedora Core 5 to FC6, and now ekiga doesn't > > work anylonger. > > I've tried to find a version 2.03 for FC6 but I've not been > > successfull. Now when someone calls me, it rings, but after two or > > three rings, it hangs up as busy, and when I try to do the same, > > calling 500 at ekiga.net, it rings two or 3 times again, and it ends up as > > busy. > > I'm behind a router, but before FC6 it worked, and I didn't change > > anything in the router settings. > > Does someone have an idea ? Thank you in advance. Francois > > What does the -d 4 output tell? This is it : http://phpfi.com/181027 Francois -- From dsandras at seconix.com Sun Dec 3 18:48:09 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 03 Dec 2006 19:48:09 +0100 Subject: [Ekiga-list] Switch from FC5 to FC6 and my ekiga doesn't work anymore In-Reply-To: <200612031940.14961.frmas@free.fr> References: <200612031801.57512.frmas@free.fr> <1165171125.3771.1.camel@golgoth01> <200612031940.14961.frmas@free.fr> Message-ID: <1165171689.3771.3.camel@golgoth01> Le dimanche 03 d?cembre 2006 ? 19:40 +0100, Francois Massonneau a ?crit : > On Sunday 03 December 2006 19:38, Damien Sandras wrote: > > Hi, > > > > Le dimanche 03 d?cembre 2006 ? 18:01 +0100, Francois Massonneau a > > > > ?crit : > > > Hi, > > > > > > I've just switched from Fedora Core 5 to FC6, and now ekiga doesn't > > > work anylonger. > > > I've tried to find a version 2.03 for FC6 but I've not been > > > successfull. Now when someone calls me, it rings, but after two or > > > three rings, it hangs up as busy, and when I try to do the same, > > > calling 500 at ekiga.net, it rings two or 3 times again, and it ends up as > > > busy. > > > I'm behind a router, but before FC6 it worked, and I didn't change > > > anything in the router settings. > > > Does someone have an idea ? Thank you in advance. Francois > > > > What does the -d 4 output tell? > > This is it : > http://phpfi.com/181027 Asterisk was crashed on ekiga.net Can you try again? :) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From frmas at free.fr Sun Dec 3 19:18:53 2006 From: frmas at free.fr (Francois Massonneau) Date: Sun, 3 Dec 2006 20:18:53 +0100 Subject: [Ekiga-list] =?iso-8859-15?q?Switch_from_FC5_to_FC6_and_my_ekiga_?= =?iso-8859-15?q?doesn=27t=09work=09anymore?= In-Reply-To: <1165171689.3771.3.camel@golgoth01> References: <200612031801.57512.frmas@free.fr> <200612031940.14961.frmas@free.fr> <1165171689.3771.3.camel@golgoth01> Message-ID: <200612032018.53257.frmas@free.fr> On Sunday 03 December 2006 19:48, Damien Sandras wrote: > > This is it : > > http://phpfi.com/181027 > > Asterisk was crashed on ekiga.net > > Can you try again? :) :-) It works now Damien. I still have to find out why v4l2 crashes now when I want to turn on the webcam from ekiga. It worked fine when running FC5, but since FC6, it doesn't work. I saw messages from other people having the same pb. Thank you Damien for that great work. Francois -- From geboyd53 at comcast.net Mon Dec 4 01:52:31 2006 From: geboyd53 at comcast.net (George Boyd) Date: Sun, 03 Dec 2006 17:52:31 -0800 Subject: [Ekiga-list] Switch from FC5 to FC6 and my ekiga doesn't work anymore In-Reply-To: <200612032018.53257.frmas@free.fr> References: <200612031801.57512.frmas@free.fr> <200612031940.14961.frmas@free.fr> <1165171689.3771.3.camel@golgoth01> <200612032018.53257.frmas@free.fr> Message-ID: <1165197151.23856.1.camel@george> I don't know what web cam your running, but if you use PWC for your driver, don't rely on the PWC that comes with Core 6. Download the latest one and compile it for your kernel. If you install a new kernel, you will have to recompile it again. > I still have to find out why v4l2 crashes now when I want to turn on the > webcam from ekiga. It worked fine when running FC5, but since FC6, it > doesn't work. I saw messages from other people having the same pb. > Thank you Damien for that great work. Francois From rpolach at atlas.cz Mon Dec 4 19:01:29 2006 From: rpolach at atlas.cz (Roman Polach) Date: Mon, 04 Dec 2006 20:01:29 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" Message-ID: > Le jeudi 30 novembre 2006 a` 16:19 +0100, Roman Polach a ?crit : > > [..] > > > "ekiga -d 4" shows this: > > > > 2006/11/30 11:25:05.983 0:00.472 ekiga Detected audio plugins: ALSA > > 2006/11/30 11:25:05.984 0:00.472 ekiga Detected video plugins: Picture,V4L,V4L2 > > 2006/11/30 11:25:05.984 0:00.472 ekiga Detected audio plugins: ALSA > > 2006/11/30 11:25:05.984 0:00.472 ekiga Detected video plugins: Picture,V4L,V4L2 > > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following audio input devices: SB Live [Unknown],Default with plugin ALSA > > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following audio output devices: SB Live [Unknown],Default with plugin ALSA > > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following video input devices: StaticPicture,MovingLogo with plugin Picture > > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following audio input devices: SB Live [Unknown],Default with plugin ALSA > > 2006/11/30 11:25:06.000 0:00.488 ekiga Detected the following audio output devices: SB Live [Unknown],Default with plugin ALSA > > 2006/11/30 11:25:06.000 0:00.489 ekiga Detected the following video input devices: StaticPicture,MovingLogo with plugin Picture > > > > (ekiga:25369): gnome-vfs-modules-WARNING **: Could not initialize inotify > > > > 2006/11/30 11:25:06.917 0:01.406 ekiga Ekiga version 2.0.3 > > 2006/11/30 11:25:06.926 0:01.415 ekiga OPAL version 2.2.3 > > 2006/11/30 11:25:06.932 0:01.421 ekiga PWLIB version 1.10.2 > > 2006/11/30 11:25:06.938 0:01.427 ekiga GNOME support enabled > > 2006/11/30 11:25:06.944 0:01.432 ekiga Fullscreen support enabled > > 2006/11/30 11:25:06.949 0:01.438 ekiga DBUS support enabled > > 2006/11/30 11:25:06.960 0:01.449 ekiga Set TCP port range to 30000:30010 > > 2006/11/30 11:25:06.968 0:01.457 ekiga Set RTP port range to 5000:5059 > > 2006/11/30 11:25:06.976 0:01.465 ekiga Set UDP port range to 5060:5100 > > > > no other output is generated by the time message "Registration failed: Timeout" appears in statusbar of ekiga gui. > > > It is unfortunately incomplete. There is a bug in the gentoo ebuild that > prevents correct logging to operate, but we don't know which one. There is a gentoo bug related to this: http://bugs.gentoo.org/show_bug.cgi?id=55708 but I'm going to try to compile ekiga manually or modify the ebuild for me, but I don't know which configure options I need to enable to get logging-capable ekiga... > > But are you sure that Ekiga is listening on the appropriate interface? I see the correct local IP address in ekiga Preferences dialog and there is only one network interface: eth0 (and lo of course), so I hope, yes > Can you sniff the traffic on both routers and see what happens? How can I do that? Thanks, Roman Polach From frank.lynch at gmail.com Tue Dec 5 01:29:16 2006 From: frank.lynch at gmail.com (Frank Lynch) Date: Mon, 4 Dec 2006 20:29:16 -0500 Subject: [Ekiga-list] No video images from webcam in Ekiga for Windows Message-ID: <24fb4ebb0612041729o51249fd8l4f8535fabf47ab22@mail.gmail.com> >Le mardi 14 novembre 2006 ? 20:08 +0100, Jan Schampera a ?crit : >> On Tue, 14 Nov 2006 13:50:04 -0500 (EST) >> Robert Fraser wrote: >> >> > I used a shareware program called 263Set to test the webcam. This >> > program uses "Video for Windows/Microsoft WDM Image Capture (Win32)" >> > to capture images from a webcam like Ekiga does. The program >> > displayed images from the webcam. >> >> Maybe the cam doesn't send the required format or so. I have no >> expirience with that, just a sidenote. >> > >Same here. > >In other words, you are on your own :( >-- >Damien Sandras I'm in the same boat here, (tested with 2 different logitech webcams on both XP and win2k) and I get nothing but green :-( I understand that ekiga can interoperate with Windows Live messenger on XP, but I'm at a loss for w2k. If anyone knows of a windows 2000 compatible client that is capable of interoperating with ekiga (using video SIP, H.323 etc) I'd really appreciate a pointer/link. thanks & regards, --Frank From dsandras at seconix.com Tue Dec 5 08:31:35 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Dec 2006 09:31:35 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" In-Reply-To: References: Message-ID: <1165307495.3678.4.camel@golgoth01> Le lundi 04 d?cembre 2006 ? 20:01 +0100, Roman Polach a ?crit : > > > > > > But are you sure that Ekiga is listening on the appropriate interface? > > I see the correct local IP address in ekiga Preferences dialog and there is > only one network interface: eth0 (and lo of course), so I hope, yes > > > Can you sniff the traffic on both routers and see what happens? > > How can I do that? > Using tcpdump or ethereal (if they are Linux-based). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From geboyd53 at comcast.net Tue Dec 5 10:29:13 2006 From: geboyd53 at comcast.net (George Boyd) Date: Tue, 05 Dec 2006 02:29:13 -0800 Subject: [Ekiga-list] Alsa Weirdness Message-ID: <1165314553.11610.13.camel@george> Damien, I don't know whether this should be directed yo you or not. The problem I'm having is an annoyance with ALSA I can set Ekiga to use the default audio devices EXCEPT for the output device. I have to use the sound card directly. If I try to use the default for the output device, ALSA is very distorted and the jitter buffer goes berserk. I do have the /etc/asound.conf file setup (actually copied and pasted form The getting ALSA to work with several applications at once ( http://wiki.ekiga.org/index.php/Getting_several_applications_using_the_sound_card_at_the_same_time_%3F) website. I've tried to figure out how to fine tune ALSA to stop this problem, but I really don't understand how ALSA works to be able to change anything intelligently . If it is something that may be easy to resolve, then any help will be appreciated. If not, Ekiga runs fine with the way I have it set, but it does cause problems with some other audio programs. Thanks in Advance, George From cannewilson at tiscali.co.uk Tue Dec 5 07:45:36 2006 From: cannewilson at tiscali.co.uk (Anne Wilson) Date: Tue, 5 Dec 2006 07:45:36 +0000 Subject: [Ekiga-list] No video images from webcam in Ekiga for Windows In-Reply-To: <24fb4ebb0612041729o51249fd8l4f8535fabf47ab22@mail.gmail.com> References: <24fb4ebb0612041729o51249fd8l4f8535fabf47ab22@mail.gmail.com> Message-ID: <200612050745.37165.cannewilson@tiscali.co.uk> On Tuesday 05 December 2006 01:29, Frank Lynch wrote: > >Le mardi 14 novembre 2006 ? 20:08 +0100, Jan Schampera a ?crit : > >> On Tue, 14 Nov 2006 13:50:04 -0500 (EST) > >> > >> Robert Fraser wrote: > >> > I used a shareware program called 263Set to test the webcam. This > >> > program uses "Video for Windows/Microsoft WDM Image Capture (Win32)" > >> > to capture images from a webcam like Ekiga does. The program > >> > displayed images from the webcam. > >> > >> Maybe the cam doesn't send the required format or so. I have no > >> expirience with that, just a sidenote. > > > >Same here. > > > >In other words, you are on your own :( > >-- > >Damien Sandras > > I'm in the same boat here, (tested with 2 different logitech webcams > on both XP and win2k) and I get nothing but green :-( > > I understand that ekiga can interoperate with Windows Live messenger > on XP, but I'm at a loss for w2k. If anyone knows of a windows 2000 > compatible client that is capable of interoperating with ekiga (using > video SIP, H.323 etc) I'd really appreciate a pointer/link. > thanks & regards, Frank, I've only just started using Ekiga, but long ago I used GnomeMeeting, and found no problems (other than firewall problems) in communicating with a NetMeeting user. I understand that Ekiga can do exactly the same. HTH Anne -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From dsandras at seconix.com Tue Dec 5 10:52:52 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Dec 2006 11:52:52 +0100 Subject: [Ekiga-list] Alsa Weirdness In-Reply-To: <1165314553.11610.13.camel@george> References: <1165314553.11610.13.camel@george> Message-ID: <1165315972.3678.14.camel@golgoth01> Le mardi 05 d?cembre 2006 ? 02:29 -0800, George Boyd a ?crit : > Damien, I don't know whether this should be directed yo you or not. The > problem I'm having is an annoyance with ALSA > > I can set Ekiga to use the default audio devices EXCEPT for the output > device. I have to use the sound card directly. If I try to use the > default for the output device, ALSA is very distorted and the jitter > buffer goes berserk. > > I do have the /etc/asound.conf file setup (actually copied and pasted > form The getting ALSA to work with several applications at once ( > http://wiki.ekiga.org/index.php/Getting_several_applications_using_the_sound_card_at_the_same_time_%3F) website. > > I've tried to figure out how to fine tune ALSA to stop this problem, but > I really don't understand how ALSA works to be able to change anything > intelligently > . > If it is something that may be easy to resolve, then any help will be > appreciated. If not, Ekiga runs fine with the way I have it set, but it > does cause problems with some other audio programs. > Ekiga 2.0.4 will have a workaround for that problem. Unfortunately, we are waiting for some other bugs to be fixed in OPAL/PWLIB before the release. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From moneyloverxxx at yahoo.se Tue Dec 5 16:57:20 2006 From: moneyloverxxx at yahoo.se (Bill Dream) Date: Tue, 5 Dec 2006 17:57:20 +0100 (CET) Subject: [Ekiga-list] Settings Message-ID: <20061205165720.27075.qmail@web26102.mail.ukl.yahoo.com> Hi, I have received information about my @ekiga.net account. But I could not find in manual information about following: SIP Server: Outbound Proxy: Shall I use just stuff before xxxx at ekiga.net as SIP User ID and Authenticate ID? Thanks. --------------------------------- Stava r?tt! Stava l?tt! Yahoo! Mails stavkontroll tar hand om tryckfelen och mycket mer! F? den p? http://se.mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Dec 5 17:22:12 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 05 Dec 2006 18:22:12 +0100 Subject: [Ekiga-list] Settings In-Reply-To: <20061205165720.27075.qmail@web26102.mail.ukl.yahoo.com> References: <20061205165720.27075.qmail@web26102.mail.ukl.yahoo.com> Message-ID: <1165339332.3678.43.camel@golgoth01> Hi use the configuration assistant :) Le mardi 05 d?cembre 2006 ? 17:57 +0100, Bill Dream a ?crit : > Hi, > I have received information about my @ekiga.net account. But I could > not find in manual information about following: > SIP Server: > Outbound Proxy: > Shall I use just stuff before xxxx at ekiga.net as SIP User ID and > Authenticate ID? > > Thanks. > > ______________________________________________________________________ > > Stava r?tt! Stava l?tt! Yahoo! Mails stavkontroll tar hand om > tryckfelen och mycket mer! F? den p? http://se.mail.yahoo.com > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From rpolach at atlas.cz Tue Dec 5 19:11:56 2006 From: rpolach at atlas.cz (Roman Polach) Date: Tue, 05 Dec 2006 20:11:56 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" Message-ID: <74379b13f87442a39ea7dc9c5db59fac@atlas.cz> >Le lundi 04 d?cembre 2006 a 20:01 +0100, Roman Polach a ?crit : >> > >> > >> > But are you sure that Ekiga is listening on the appropriate interface? >> >> I see the correct local IP address in ekiga Preferences dialog and there is >> only one network interface: eth0 (and lo of course), so I hope, yes >> >> > Can you sniff the traffic on both routers and see what happens? >> >> How can I do that? >> > >Using tcpdump or ethereal (if they are Linux-based). I have saved some tcpdump logs here: http://artwine.wz.cz/secondary/log/tcpdump/wks_eth0.txt ... this is output of tcpdump on my desktop box http://artwine.wz.cz/secondary/log/tcpdump/rtr_eth0.txt ... this is output of tcpdump on inner router - inner interface http://artwine.wz.cz/secondary/log/tcpdump/rtr_wlan0.txt ... this is output of tcpdump on inner router - outer interface The outer router is an ADSL modem and I do not know how to get any information about data going through it... and I am still not able to get some logging information from ekiga :( From ram at tataelxsi.co.in Wed Dec 6 06:03:44 2006 From: ram at tataelxsi.co.in (Ramachandran M) Date: Wed, 6 Dec 2006 11:33:44 +0530 Subject: [Ekiga-list] ekiga call flow Message-ID: <000501c718fc$49d4da60$191c320a@telxsi.com> hi all i have some doubt in the SIP call flow.Please help me.... STEPS: 1.sender receives the 180 ringing, so onrecivedRinging() is to be called. void SIPConnection::OnReceivedRinging(SIP_PDU & /*response*/) { PTRACE(2, "SIP\tReceived Ringing response"); if (phase < AlertingPhase) { phase = AlertingPhase; OnAlerting(); } 2.In OnReceivedRinging() function,OnAlerting is also called. BOOL OpalCall::OnAlerting(OpalConnection & connection) { PTRACE(3, "Call\tOnAlerting " << connection); BOOL ok = FALSE; if (!LockReadWrite()) return FALSE; partyB = connection.GetRemotePartyName(); UnlockReadWrite(); BOOL hasMedia = connection.GetMediaStream(OpalMediaFormat::DefaultAudioSessionID, TRUE) != NULL; for (PSafePtr conn(connectionsActive, PSafeReadOnly); conn != NULL; ++conn) { if (conn != &connection) { if (conn->SetAlerting(connection.GetRemotePartyName(), hasMedia)) ok = TRUE; } } return ok; } 3. See this line in OnAlerting() function: conn->SetAlerting(connection.GetRemotePartyName(), hasMedia)) here we are calling setAlerting() 4.the setalerting() definition is given below: BOOL SIPConnection::SetAlerting(const PString & /*calleeName*/, BOOL /*withMedia*/) { if (IsOriginating()) { PTRACE(2, "SIP\tSetAlerting ignored on call we originated."); return TRUE; } PTRACE(2, "SIP\tSetAlerting"); if (phase != SetUpPhase) return FALSE; SIP_PDU response(*originalInvite, SIP_PDU::Information_Ringing); SendPDU(response, originalInvite->GetViaAddress(endpoint)); phase = AlertingPhase; return TRUE; } Here we are sending SIP_PDU::Information_Ringing to the "PartyB",why it is so? But actual flow i studied in SIP TUTORIAL is partyA has to send the invite, the partyB has to send the 180::Ringing,200::OK then PartyA has to send the ACK Can you clarify me? thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Wed Dec 6 09:34:49 2006 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 06 Dec 2006 10:34:49 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" In-Reply-To: <74379b13f87442a39ea7dc9c5db59fac@atlas.cz> References: <74379b13f87442a39ea7dc9c5db59fac@atlas.cz> Message-ID: <1165397689.3663.13.camel@golgoth01> Le mardi 05 d?cembre 2006 ? 20:11 +0100, Roman Polach a ?crit : > >Le lundi 04 d?cembre 2006 a 20:01 +0100, Roman Polach a ?crit : > >> > > >> > > >> > But are you sure that Ekiga is listening on the appropriate interface? > >> > >> I see the correct local IP address in ekiga Preferences dialog and there is > >> only one network interface: eth0 (and lo of course), so I hope, yes > >> > >> > Can you sniff the traffic on both routers and see what happens? > >> > >> How can I do that? > >> > > > >Using tcpdump or ethereal (if they are Linux-based). > > I have saved some tcpdump logs here: > http://artwine.wz.cz/secondary/log/tcpdump/wks_eth0.txt > ... this is output of tcpdump on my desktop box > http://artwine.wz.cz/secondary/log/tcpdump/rtr_eth0.txt > ... this is output of tcpdump on inner router - inner interface > http://artwine.wz.cz/secondary/log/tcpdump/rtr_wlan0.txt > ... this is output of tcpdump on inner router - outer interface > The outer router is an ADSL modem and I do not know how to get > any information about data going through it... > > and I am still not able to get some logging information from ekiga :( > > 11:22:01.514920 IP 10.0.0.204.5064 > ekiga.net.5060: SIP, length: 572 I see no answer. Are you sure your rtr_wlan0 is not rewriting the SIP PDU through the SIP conntracker module or similar? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Dec 6 09:35:44 2006 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 06 Dec 2006 10:35:44 +0100 Subject: [Ekiga-list] ekiga call flow In-Reply-To: <000501c718fc$49d4da60$191c320a@telxsi.com> References: <000501c718fc$49d4da60$191c320a@telxsi.com> Message-ID: <1165397744.3663.15.camel@golgoth01> Hi, This question should be addressed to openh323 at openh323.org, we have taken the decision to concentrate only on Ekiga help. Thanks, Le mercredi 06 d?cembre 2006 ? 11:33 +0530, Ramachandran M a ?crit : > hi all > > i have some doubt in the SIP call flow.Please help me.... > > STEPS: > 1.sender receives the 180 ringing, so onrecivedRinging() is to be > called. > > void SIPConnection::OnReceivedRinging(SIP_PDU & /*response*/) > { > PTRACE(2, "SIP\tReceived Ringing response"); > > if (phase < AlertingPhase) > { > phase = AlertingPhase; > OnAlerting(); > } > > 2.In OnReceivedRinging() function,OnAlerting is also called. > BOOL OpalCall::OnAlerting(OpalConnection & connection) > { > PTRACE(3, "Call\tOnAlerting " << connection); > > BOOL ok = FALSE; > > if (!LockReadWrite()) > return FALSE; > > partyB = connection.GetRemotePartyName(); > > UnlockReadWrite(); > > > BOOL hasMedia = > connection.GetMediaStream(OpalMediaFormat::DefaultAudioSessionID, > TRUE) != NULL; > > for (PSafePtr conn(connectionsActive, > PSafeReadOnly); conn != NULL; ++conn) { > if (conn != &connection) { > if (conn->SetAlerting(connection.GetRemotePartyName(), > hasMedia)) > ok = TRUE; > } > } > > return ok; > } > > 3. See this line in OnAlerting() function: > conn->SetAlerting(connection.GetRemotePartyName(), hasMedia)) > > > here we are calling setAlerting() > > > > 4.the setalerting() definition is given below: > > BOOL SIPConnection::SetAlerting(const PString & /*calleeName*/, > BOOL /*withMedia*/) > { > if (IsOriginating()) { > PTRACE(2, "SIP\tSetAlerting ignored on call we originated."); > return TRUE; > } > > PTRACE(2, "SIP\tSetAlerting"); > > if (phase != SetUpPhase) > return FALSE; > > SIP_PDU response(*originalInvite, SIP_PDU::Information_Ringing); > SendPDU(response, originalInvite->GetViaAddress(endpoint)); > phase = AlertingPhase; > > return TRUE; > } > > > > > Here we are sending SIP_PDU::Information_Ringing to the "PartyB",why > it is so? > > But actual flow i studied in SIP TUTORIAL is > partyA has to send the invite, > the partyB has to send the 180::Ringing,200::OK > then PartyA has to send the ACK > > > Can you clarify me? > > > thanks > > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From craigs at postincrement.com Wed Dec 6 10:01:46 2006 From: craigs at postincrement.com (Craig Southeren) Date: Wed, 06 Dec 2006 21:01:46 +1100 Subject: [Ekiga-list] ekiga call flow In-Reply-To: <000501c718fc$49d4da60$191c320a@telxsi.com> References: <000501c718fc$49d4da60$191c320a@telxsi.com> Message-ID: <20061206205807.D187.CRAIGS@postincrement.com> On Wed, 6 Dec 2006 11:33:44 +0530 Ramachandran M wrote: ..deleted > Here we are sending SIP_PDU::Information_Ringing to the "PartyB",why it is > so? > > But actual flow i studied in SIP TUTORIAL is > partyA has to send the invite, > the partyB has to send the 180::Ringing,200::OK > then PartyA has to send the ACK > > Can you clarify me? The call flow in OPAL is correct. Party A sends the INVITE, then party B sends a 180 Ringing, then party B sends a 200 OK, then party A sends an ACK. You'll need to look at the code more carefully. Also, OPAL specific questions should be directed to the mailing list at openh323 at openh32.org rather than the Ekiga list. Craig ----------------------------------------------------------------------- Craig Southeren Post Increment ? VoIP Consulting and Software craigs at postincrement.com.au www.postincrement.com.au Phone: +61 243654666 ICQ: #86852844 Fax: +61 243656905 MSN: craig_southeren at hotmail.com Mobile: +61 417231046 Jabber: craigs at jabber.org "It takes a man to suffer ignorance and smile. Be yourself, no matter what they say." Sting From dsandras at seconix.com Wed Dec 6 10:04:21 2006 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 06 Dec 2006 11:04:21 +0100 Subject: [Ekiga-list] ekiga call flow In-Reply-To: <20061206205807.D187.CRAIGS@postincrement.com> References: <000501c718fc$49d4da60$191c320a@telxsi.com> <20061206205807.D187.CRAIGS@postincrement.com> Message-ID: <1165399461.3663.46.camel@golgoth01> Le mercredi 06 d?cembre 2006 ? 21:01 +1100, Craig Southeren a ?crit : > On Wed, 6 Dec 2006 11:33:44 +0530 > Ramachandran M wrote: > > ..deleted > > > Here we are sending SIP_PDU::Information_Ringing to the "PartyB",why it is > > so? > > > > But actual flow i studied in SIP TUTORIAL is > > partyA has to send the invite, > > the partyB has to send the 180::Ringing,200::OK > > then PartyA has to send the ACK > > > > Can you clarify me? > > The call flow in OPAL is correct. > > Party A sends the INVITE, then party B sends a 180 Ringing, then party B > sends a 200 OK, then party A sends an ACK. > > You'll need to look at the code more carefully. > > Also, OPAL specific questions should be directed to the mailing list at > openh323 at openh32.org rather than the Ekiga list. Nice to see you are still answering (some) e-mails... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From rpolach at atlas.cz Wed Dec 6 14:23:11 2006 From: rpolach at atlas.cz (Roman Polach) Date: Wed, 06 Dec 2006 15:23:11 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" Message-ID: >> > >11:22:01.514920 IP 10.0.0.204.5064 > ekiga.net.5060: SIP, length: 572 > >I see no answer. > >Are you sure your rtr_wlan0 is not rewriting the SIP PDU through the SIP >conntracker module or similar? >-- No, the only conntracker module it uses is ftp_conntrack. Are there any other kernel options I could to check? (kernel 2.6.16-gentoo-r7) From dsandras at seconix.com Wed Dec 6 14:30:32 2006 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 06 Dec 2006 15:30:32 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" In-Reply-To: References: Message-ID: <1165415432.3663.73.camel@golgoth01> Le mercredi 06 d?cembre 2006 ? 15:23 +0100, Roman Polach a ?crit : > >> > > > >11:22:01.514920 IP 10.0.0.204.5064 > ekiga.net.5060: SIP, length: 572 > > > >I see no answer. > > > >Are you sure your rtr_wlan0 is not rewriting the SIP PDU through the SIP > >conntracker module or similar? > >-- > > No, the only conntracker module it uses is ftp_conntrack. > Are there any other kernel options I could to check? > (kernel 2.6.16-gentoo-r7) I don't know. I think you will have to investigate by yourself, sorry. The only thing I can confirm is that your router drops the answer, for one reason, or another. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From rpolach at atlas.cz Wed Dec 6 18:02:50 2006 From: rpolach at atlas.cz (Roman Polach) Date: Wed, 06 Dec 2006 19:02:50 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" Message-ID: <3c2838bd5df146cfbff2714c6da81634@atlas.cz> >> >> No, the only conntracker module it uses is ftp_conntrack. >> Are there any other kernel options I could to check? >> (kernel 2.6.16-gentoo-r7) > >I don't know. > >I think you will have to investigate by yourself, sorry. >The only thing I can confirm is that your router drops the answer, for >one reason, or another. do you mean that (gentoo) "rtr" router drops it or the ADSL router? From dsandras at seconix.com Wed Dec 6 19:00:46 2006 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 06 Dec 2006 20:00:46 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" In-Reply-To: <3c2838bd5df146cfbff2714c6da81634@atlas.cz> References: <3c2838bd5df146cfbff2714c6da81634@atlas.cz> Message-ID: <1165431646.3663.79.camel@golgoth01> Le mercredi 06 d?cembre 2006 ? 19:02 +0100, Roman Polach a ?crit : > >> > >> No, the only conntracker module it uses is ftp_conntrack. > >> Are there any other kernel options I could to check? > >> (kernel 2.6.16-gentoo-r7) > > > >I don't know. > > > >I think you will have to investigate by yourself, sorry. > >The only thing I can confirm is that your router drops the answer, for > >one reason, or another. > > do you mean that (gentoo) "rtr" router drops it or the ADSL router? I think the one connected to the WAN (perhaps the DSL router). Wouldn't there be a buggy SIP conntracker module on it? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Wed Dec 6 19:42:42 2006 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 06 Dec 2006 20:42:42 +0100 Subject: [Ekiga-list] French contributors Message-ID: <1165434162.3663.86.camel@golgoth01> Hello, If any of you feels like improving this "stub", it is welcome. http://gilo.idealx.com/index.php/Ekiga Thanks, -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From moneyloverxxx at yahoo.se Thu Dec 7 12:28:33 2006 From: moneyloverxxx at yahoo.se (Bill Dream) Date: Thu, 7 Dec 2006 13:28:33 +0100 (CET) Subject: [Ekiga-list] Configuration assistant In-Reply-To: Message-ID: <725154.82015.qm@web26104.mail.ukl.yahoo.com> Hi, Will you please tell me where I can find that "Ekiga configuration assistant"? I have tried but... :-( BD --------------------------------- Stava r?tt! Stava l?tt! Yahoo! Mails stavkontroll tar hand om tryckfelen och mycket mer! F? den p? http://se.mail.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: From stefano.sabatini-lala at poste.it Thu Dec 7 12:38:24 2006 From: stefano.sabatini-lala at poste.it (Stefano Sabatini) Date: Thu, 7 Dec 2006 13:38:24 +0100 Subject: [Ekiga-list] Configuration assistant In-Reply-To: <725154.82015.qm@web26104.mail.ukl.yahoo.com> References: <725154.82015.qm@web26104.mail.ukl.yahoo.com> Message-ID: <20061207123824.GA5952@santefisi.caos.org> On Thursday 2006-12-07 13:28:33 +0100, Bill Dream wrote: > Hi, > > Will you please tell me where I can find that "Ekiga configuration assistant"? In the menu bar of Ekiga (2.0.3): Edit --> Configuration Druid HTH From agustin.treceno at gmail.com Thu Dec 7 19:00:21 2006 From: agustin.treceno at gmail.com (=?ISO-8859-1?Q?Agust=EDn_Trece=F1o?=) Date: Thu, 7 Dec 2006 20:00:21 +0100 Subject: [Ekiga-list] How to use dialpad for sending letters Message-ID: Hi!. Just an easy question. How can i use de dialpad of ekiga for sending letters instead of numbers?. I need send letters to an asterisk pbx (for the directory application). Cheers! Agust?n T. -------------- next part -------------- An HTML attachment was scrubbed... URL: From mariofutire at googlemail.com Thu Dec 7 19:19:59 2006 From: mariofutire at googlemail.com (Mario Rossi) Date: Thu, 7 Dec 2006 19:19:59 +0000 Subject: [Ekiga-list] Alsa Weirdness Message-ID: <53d94280612071119te32d45h13674d4db9749386@mail.gmail.com> Reading ALSA documentation about dmix http://alsa.opensrc.org/DmixPlugin At the very bottom, there is this interesting info about dmix. Basically the suggestion is... to use JACK (???). Does anybody know whether it exists a dmix equivalent in JACK with better results? " Can dmix be used within a single program to effectively mix different "voices"? Does its latency permit scheduling with (at least) single-frame accuracy (e.g., I start VoiceA? and wish to setup and schedule VoiceB? to be "added to the mix" at a certain point)? If someone knows how to do this, some guidance or a nudge in the right direction would be greatly appreciated. --- Answer: Latency depends on period and buffer size. AFAIK dmix is not designed as sample-accurate (because it is usually not needed on general purpose audio system and will make the design quite complex). If you need sample-accurate and fully syncronized mixer/router, you should consider using the Jack http://jackaudio.org/. Large number of Linux audio applications, where sample-accurate mixing is needed, support Jack. On the other hand, overall latency of the audio system will still mostly depend on period size. As small as your period size can be, as low latecy you will get. Of course, low latency needs good task scheduler in kernel. If you start getting xruns on low latency audio setup, you should use some low-latency/realtime kernel patches. I reccomend Ingo Molnar's realtime preempt http://people.redhat.com/mingo/realtime-preempt/ or Con Colivas patch set http://members.optusnet.com.au/ckolivas/kernel/. " From jan.schampera at web.de Thu Dec 7 19:27:22 2006 From: jan.schampera at web.de (Jan Schampera) Date: Thu, 7 Dec 2006 20:27:22 +0100 Subject: [Ekiga-list] How to use dialpad for sending letters In-Reply-To: References: Message-ID: <20061207202722.7b5ddcc4@localhost.localdomain> On Thu, 7 Dec 2006 20:00:21 +0100 "Agust?n Trece?o" wrote: > Hi!. Just an easy question. How can i use de dialpad of ekiga for > sending letters instead of numbers?. I need send letters to an > asterisk pbx (for the directory application). Cheers! Depends how Asterisk interprets them, but if you have 2 - abc 3 - def 4 - ghi 5 - jkl and you want to "write" EKIGA, just press the number where the letter is on, then the number of that letter on this key. "B" would be the second letter on "2" key, so, 2-2. 3-2 5-2 4-3 4-1 2-1 E K I G A IF the target system interprets it like that... J. -- Der Mensch, der bereit ist, seine Freiheit aufzugeben, um Sicherheit zu gewinnen, wird beides verlieren. - Benjamin Franklin From dsandras at seconix.com Fri Dec 8 12:01:51 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 08 Dec 2006 13:01:51 +0100 Subject: [Ekiga-list] Alsa Weirdness In-Reply-To: <53d94280612071119te32d45h13674d4db9749386@mail.gmail.com> References: <53d94280612071119te32d45h13674d4db9749386@mail.gmail.com> Message-ID: <1165579311.29465.22.camel@golgoth01> Le jeudi 07 d?cembre 2006 ? 19:19 +0000, Mario Rossi a ?crit : > Reading ALSA documentation about dmix > > http://alsa.opensrc.org/DmixPlugin > > At the very bottom, there is this interesting info about dmix. > Basically the suggestion is... to use JACK (???). Does anybody know > whether it exists a dmix equivalent in JACK with better results? > > " > Can dmix be used within a single program to effectively mix different > "voices"? Does its latency permit scheduling with (at least) > single-frame accuracy (e.g., I start VoiceA? and wish to setup and > schedule VoiceB? to be "added to the mix" at a certain point)? If > someone knows how to do this, some guidance or a nudge in the right > direction would be greatly appreciated. I think you can configure ALSA to use Jack by default, but it is complicated. Sorry, I don't answer your question... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From sevmek at free.fr Fri Dec 8 17:45:47 2006 From: sevmek at free.fr (yannick) Date: Fri, 08 Dec 2006 18:45:47 +0100 Subject: [Ekiga-list] Alsa Weirdness In-Reply-To: <53d94280612071119te32d45h13674d4db9749386@mail.gmail.com> References: <53d94280612071119te32d45h13674d4db9749386@mail.gmail.com> Message-ID: <1165599947.9768.22.camel@achille> Le jeudi 07 d?cembre 2006 ? 19:19 +0000, Mario Rossi a ?crit : > Reading ALSA documentation about dmix > > http://alsa.opensrc.org/DmixPlugin > > At the very bottom, there is this interesting info about dmix. > Basically the suggestion is... to use JACK (???). Does anybody know > whether it exists a dmix equivalent in JACK with better results? > > " > Can dmix be used within a single program to effectively mix different > "voices"? Does its latency permit scheduling with (at least) > single-frame accuracy (e.g., I start VoiceA? and wish to setup and > schedule VoiceB? to be "added to the mix" at a certain point)? If > someone knows how to do this, some guidance or a nudge in the right > direction would be greatly appreciated. > > --- > > Answer: Latency depends on period and buffer size. AFAIK dmix is not > designed as sample-accurate (because it is usually not needed on > general purpose audio system and will make the design quite complex). > > If you need sample-accurate and fully syncronized mixer/router, you > should consider using the Jack http://jackaudio.org/. Large number of > Linux audio applications, where sample-accurate mixing is needed, > support Jack. > > On the other hand, overall latency of the audio system will still > mostly depend on period size. As small as your period size can be, as > low latecy you will get. > > Of course, low latency needs good task scheduler in kernel. If you > start getting xruns on low latency audio setup, you should use some > low-latency/realtime kernel patches. I reccomend Ingo Molnar's > realtime preempt http://people.redhat.com/mingo/realtime-preempt/ or > Con Colivas patch set http://members.optusnet.com.au/ckolivas/kernel/. > > " Hi, I've tried some time ago to use Ekiga with JACK, but without succes. Here is how I proceded : http://bugzilla.gnome.org/show_bug.cgi?id=335105 I hope this will help... Regards, Yannick > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From rpolach at atlas.cz Fri Dec 8 19:51:23 2006 From: rpolach at atlas.cz (Roman Polach) Date: Fri, 08 Dec 2006 20:51:23 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" Message-ID: >> >I don't know. >> > >> >I think you will have to investigate by yourself, sorry. >> >The only thing I can confirm is that your router drops the answer, for >> >one reason, or another. >> >> do you mean that (gentoo) "rtr" router drops it or the ADSL router? > >I think the one connected to the WAN (perhaps the DSL router). > >Wouldn't there be a buggy SIP conntracker module on it? > If it is not nonconfigurable-invisible-hardwired, I thing no. I see no such thing in its configuration. But I see strangle thing in tcpdump output: 20:47:10.931999 IP 192.168.1.101.5064 > ekiga.net.5060: SIP, length: 573 20:47:11.403812 IP 192.168.1.101.5063 > ekiga.net.5060: SIP, length: 495 20:47:11.432476 IP 192.168.1.101.5064 > ekiga.net.5060: SIP, length: 573 20:47:12.403881 IP 192.168.1.101.5063 > ekiga.net.5060: SIP, length: 495 20:47:12.435905 IP 192.168.1.101.5064 > ekiga.net.5060: SIP, length: 573 20:47:14.404006 IP 192.168.1.101.5063 > ekiga.net.5060: SIP, length: 495 20:47:14.436046 IP 192.168.1.101.5064 > ekiga.net.5060: SIP, length: 573 there are only few second until timeout regardless timeout settings (default 3600 or 360000 or 36000000) From post at svennielsen.de Sat Dec 9 00:17:54 2006 From: post at svennielsen.de (Sven Nielsen) Date: Sat, 09 Dec 2006 01:17:54 +0100 Subject: [Ekiga-list] simultaneous alsa access to sound card Message-ID: <457A00B2.4090204@svennielsen.de> hi, after fiddling around a bit with alsa setup on my system (debian testing) I could not get ekiga to access sound output while another sound application is also running. A few minutes ago I started up ffplay, mplayer, and amarok (using arts > alsa ), all playing simultaneously through alsa without problem, so I assume my sound card is capable of hardware mixing the sound streams (integrated AC97 Audio on nvidia2 controller board). I have also tried setting up dmix configuration in /etc/alsa/asound.conf (and /etc/asound.conf, forgot which one was the right directory), as follows: > cat /etc/alsa/asound.conf pcm.dsp0 { type plug slave.pcm "dmix" } ctl.mixer0 { type hw card 0 } So, why is it that ekiga reports: "Could not open audio channel for audio transmission" when a call comes in while I listen to some music? I am running asterisk on my home server (with a hard phone connected over hfc-s isdn card), and I would really like to take calls at my desktop PC so I won?t have to walk over to my other phone anymore. Any help appreciated, Thanks, Sven Nielsen From sevmek at free.fr Sat Dec 9 00:43:20 2006 From: sevmek at free.fr (yannick) Date: Sat, 09 Dec 2006 01:43:20 +0100 Subject: [Ekiga-list] simultaneous alsa access to sound card In-Reply-To: <457A00B2.4090204@svennielsen.de> References: <457A00B2.4090204@svennielsen.de> Message-ID: <1165625000.9768.29.camel@achille> Le samedi 09 d?cembre 2006 ? 01:17 +0100, Sven Nielsen a ?crit : > hi, > > after fiddling around a bit with alsa setup on my system (debian > testing) I could not get ekiga to access sound output while another > sound application is also running. > Hi, This may help you: http://wiki.ekiga.org/index.php/Getting_several_applications_using_the_sound_card_at_the_same_time_%3F Regards, Yannick > A few minutes ago I started up ffplay, mplayer, and amarok (using arts > > alsa ), all playing simultaneously through alsa without problem, so I > assume my sound card is capable of hardware mixing the sound streams > (integrated AC97 Audio on nvidia2 controller board). > > I have also tried setting up dmix configuration in /etc/alsa/asound.conf > (and /etc/asound.conf, forgot which one was the right directory), as > follows: > > > cat /etc/alsa/asound.conf > > pcm.dsp0 { > type plug > slave.pcm "dmix" > } > > ctl.mixer0 { > type hw > card 0 > } > > So, why is it that ekiga reports: > > "Could not open audio channel for audio transmission" > > when a call comes in while I listen to some music? > > I am running asterisk on my home server (with a hard phone connected > over hfc-s isdn card), and I would really like to take calls at my > desktop PC so I won?t have to walk over to my other phone anymore. > > Any help appreciated, > > Thanks, > Sven Nielsen > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From dsandras at seconix.com Sat Dec 9 10:24:03 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 09 Dec 2006 11:24:03 +0100 Subject: [Ekiga-list] Message "Registration failed: Timeout" In-Reply-To: References: Message-ID: <1165659843.4137.21.camel@golgoth01> Le vendredi 08 d?cembre 2006 ? 20:51 +0100, Roman Polach a ?crit : > >> >I don't know. > >> > > >> >I think you will have to investigate by yourself, sorry. > >> >The only thing I can confirm is that your router drops the answer, for > >> >one reason, or another. > >> > >> do you mean that (gentoo) "rtr" router drops it or the ADSL router? > > > >I think the one connected to the WAN (perhaps the DSL router). > > > >Wouldn't there be a buggy SIP conntracker module on it? > > > > If it is not nonconfigurable-invisible-hardwired, I thing no. > I see no such thing in its configuration. > > But I see strangle thing in tcpdump output: > > 20:47:10.931999 IP 192.168.1.101.5064 > ekiga.net.5060: SIP, length: 573 > 20:47:11.403812 IP 192.168.1.101.5063 > ekiga.net.5060: SIP, length: 495 > 20:47:11.432476 IP 192.168.1.101.5064 > ekiga.net.5060: SIP, length: 573 > 20:47:12.403881 IP 192.168.1.101.5063 > ekiga.net.5060: SIP, length: 495 > 20:47:12.435905 IP 192.168.1.101.5064 > ekiga.net.5060: SIP, length: 573 > 20:47:14.404006 IP 192.168.1.101.5063 > ekiga.net.5060: SIP, length: 495 > 20:47:14.436046 IP 192.168.1.101.5064 > ekiga.net.5060: SIP, length: 573 > > there are only few second until timeout regardless timeout settings > (default 3600 or 360000 or 36000000) That is normal. You can see 7 attempts to register in 4 seconds. You never receive an answer, so something is preventing that answer to come from the server. It must be a router problem, but I do not know which one unfortunately :( -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From leon.stringer at ntlworld.com Sun Dec 10 17:20:32 2006 From: leon.stringer at ntlworld.com (Leon Stringer) Date: Sun, 10 Dec 2006 17:20:32 +0000 Subject: [Ekiga-list] Hang during First Time druid Message-ID: <457C41E0.7060301@ntlworld.com> Hi, I'm trying to run Ekiga between two local computers. I've set one up OK, 2.0.2 on Fedora Core 5. The other is 2.0.3 on Fedora Core 6 (with "rawhide" updates). On the latter, Ekiga freezes at the Detecting NAT Type page of the First Time Configuration Assistant. I see the bouncing progress bar and then it just stops. My choices were: - I do not want to sign up for the ekiga.net free service - Connection type: ISDN The output from "-d 4" is below. Any idea what's causing this? Thanks, Leon... --- : : : 2006/12/10 17:13:04.517 0:01.165 Opal Listener:93bf480 Listen Started listening thread on tcp$192.168.0.3:1720 2006/12/10 17:13:04.517 0:01.165 Opal Listener:93bf480 Listen Waiting on socket accept on tcp$192.168.0.3:1720 2006/12/10 17:13:04.529 0:01.178 ekiga AVAHI Adding service Leon Stringer 2006/12/10 17:13:04.621 0:01.269 Opal Listener:93bfdd0 Listen Started listening thread on udp$192.168.0.3:5060 2006/12/10 17:13:04.621 0:01.269 Opal Listener:93bfdd0 Listen Waiting on UDP packet on udp$192.168.0.3:5060 2006/12/10 17:14:04.599 1:01.247 GMStunClient:094e13d8 OPAL STUN server "stun.ekiga.net" replies Symmetric NAT, external IP 86.20.158.114 ... Then nothing more From jpuydt at free.fr Sun Dec 10 18:31:19 2006 From: jpuydt at free.fr (Julien Puydt) Date: Sun, 10 Dec 2006 19:31:19 +0100 Subject: [Ekiga-list] Hang during First Time druid In-Reply-To: <457C41E0.7060301@ntlworld.com> References: <457C41E0.7060301@ntlworld.com> Message-ID: <457C5277.6070300@free.fr> Leon Stringer a ?crit : > On the latter, Ekiga freezes at the Detecting NAT Type page of the First > Time Configuration Assistant. I see the bouncing progress bar and then > it just stops. My choices were: Disable accessibility. It's buggy (doesn't handle threading well at all). Snark on #ekiga From leon.stringer at ntlworld.com Sun Dec 10 19:39:45 2006 From: leon.stringer at ntlworld.com (Leon Stringer) Date: Sun, 10 Dec 2006 19:39:45 +0000 Subject: [Ekiga-list] Hang during First Time druid In-Reply-To: <457C5277.6070300@free.fr> References: <457C41E0.7060301@ntlworld.com> <457C5277.6070300@free.fr> Message-ID: <457C6281.5080508@ntlworld.com> Julien Puydt wrote: > Leon Stringer a ?crit : >> On the latter, Ekiga freezes at the Detecting NAT Type page of the First >> Time Configuration Assistant. I see the bouncing progress bar and then >> it just stops. My choices were: > > Disable accessibility. It's buggy (doesn't handle threading well at all). Thanks Julien, that's fixed it! From brenwilliam at gmail.com Mon Dec 11 13:44:06 2006 From: brenwilliam at gmail.com (Brenda Lindsay Williams) Date: Mon, 11 Dec 2006 14:44:06 +0100 Subject: [Ekiga-list] ATM & VOIP Message-ID: Hi folks.I'm currently in the process of starting a project, this is the topic; Design and Evaluation of VOIP networks using ATM backbones.... I would really appreciate your help if you could give me some of your materials on the above topic as I am under a very strict deadline concerning the project...I have a couple of questions I wanna design an ATM protocol suite for a simulated VOIP network and then carry out performance evaluations against SIP and H.323 for VOIP networks on the following parameters using NS 2; bandwidth consumption packet loss packet delay(latency) jitter traffic thoroughput What can I use to design an ATM protocol? Could anyone pls point me to where I can get literature reviews on this topic? Can anyone pls link me up with people who work in the same or related areas? I could greatly appreciate the help cos this project will go a long way in helping me when I wanna go for my Doctorate in the same field.Also,if anyone has any information that might be beneficial to me and would like to share,pls do so.I eargely await your reply and I hope this is the start of a very good friendship.Thank you Best regards Brenda -------------- next part -------------- An HTML attachment was scrubbed... URL: From zebeej at gmail.com Tue Dec 12 08:13:04 2006 From: zebeej at gmail.com (Zebee Johnstone) Date: Tue, 12 Dec 2006 19:13:04 +1100 Subject: [Ekiga-list] website problems with opera Message-ID: I find that the ekiga website seems unusable with opera. Which is a shame, and not a great advert for the program either! Each time I try an FAQ link, or to download the program, I can't. Because I just get the page I was on, with # appended. I admit to being worried about what else isn't going to work if the site is that sensitive. Is there any other reason that I must use firefox or mozilla if I want to use ekiga? Zebee From dsandras at seconix.com Tue Dec 12 08:32:36 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 12 Dec 2006 09:32:36 +0100 Subject: [Ekiga-list] website problems with opera In-Reply-To: References: Message-ID: <1165912356.3814.7.camel@golgoth01> Le mardi 12 d?cembre 2006 ? 19:13 +1100, Zebee Johnstone a ?crit : > I find that the ekiga website seems unusable with opera. Which is a > shame, and not a great advert for the program either! > If you are able to do such shortcuts between an Open Source program and a website, while using a proprietary browser, I think it is not interesting for you to use Ekiga. > Each time I try an FAQ link, or to download the program, I can't. > Because I just get the page I was on, with # appended. > > I admit to being worried about what else isn't going to work if the > site is that sensitive. > > Is there any other reason that I must use firefox or mozilla if I want > to use ekiga? > Provide a patch for the website. We'll apply it! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From leon.stringer at ntlworld.com Tue Dec 12 12:29:11 2006 From: leon.stringer at ntlworld.com (Leon Stringer) Date: Tue, 12 Dec 2006 12:29:11 +0000 Subject: [Ekiga-list] website problems with opera Message-ID: <20061212122911.XVAP17393.aamtaout02-winn.ispmail.ntl.com@smtp.ntlworld.com> > From: Damien Sandras > Date: 2006/12/12 Tue AM 08:32:36 GMT > To: Ekiga mailing list > Subject: Re: [Ekiga-list] website problems with opera > > Le mardi 12 d?cembre 2006 ? 19:13 +1100, Zebee Johnstone a ?crit : > > Each time I try an FAQ link, or to download the program, I can't. > > Because I just get the page I was on, with # appended. > > > > Is there any other reason that I must use firefox or mozilla if I want > > to use ekiga? > > > > Provide a patch for the website. We'll apply it! Actually, have you tried this today? The FAQ doesn't seem to work with any browser I've tried (Netscape, Firefox, Opera, IE). So in Firefox if I click "Documentation & FAQ" at the top, then click the link "2. Ekiga Features" on the FAQ page, I still get the same page (i.e. page 1), exactly what Zebee reports. The reason I say have you tried this *today* is that I was looking through the FAQ at the weekend and it was working fine... ----------------------------------------- Email sent from www.ntlworld.com Virus-checked using McAfee(R) Software Visit www.ntlworld.com/security for more information From jan.schampera at web.de Tue Dec 12 14:36:45 2006 From: jan.schampera at web.de (Jan Schampera) Date: Tue, 12 Dec 2006 15:36:45 +0100 Subject: [Ekiga-list] website problems with opera In-Reply-To: <20061212122911.XVAP17393.aamtaout02-winn.ispmail.ntl.com@smtp.ntlworld.com> References: <20061212122911.XVAP17393.aamtaout02-winn.ispmail.ntl.com@smtp.ntlworld.com> Message-ID: <20061212153645.23435795@localhost.localdomain> On Tue, 12 Dec 2006 12:29:11 +0000 Leon Stringer wrote: > > Provide a patch for the website. We'll apply it! > > Actually, have you tried this today? The FAQ doesn't seem to work > with any browser I've tried (Netscape, Firefox, Opera, IE). So in > Firefox if I click "Documentation & FAQ" at the top, then click the > link "2. Ekiga Features" on the FAQ page, I still get the same page > (i.e. page 1), exactly what Zebee reports. > > The reason I say have you tried this *today* is that I was looking > through the FAQ at the weekend and it was working fine... Acknowledged. I had the very same problems with the FAQ-TOC-links yesterday. I thought it was my browser (recently updated). But it seems it's general. J. -- "One of the main causes of the fall of the Roman Empire was that, lacking zero, they had no way to indicate successful termination of their C programs" --Robert Firth From yochanon at localnet.com Tue Dec 12 15:18:26 2006 From: yochanon at localnet.com (John B) Date: Tue, 12 Dec 2006 09:18:26 -0600 Subject: [Ekiga-list] website problems with opera In-Reply-To: References: Message-ID: <200612120918.26639.yochanon@localnet.com> On Tuesday 12 December 2006 02:13, Zebee Johnstone wrote: > I find that the ekiga website seems unusable with opera. Which is a > shame, and not a great advert for the program either! > > Each time I try an FAQ link, or to download the program, I can't. > Because I just get the page I was on, with # appended. Working fine here on my Opera 9.02 on SuSE 9.3 -- Calling an illegal alien an 'undocumented workCalling an illegal alien an 'undocumented worker', is like calling a home intruder an 'unwanted houseguest'.er', is like calling a home intruder an 'unwanted houseguest'. From yochanon at localnet.com Tue Dec 12 15:21:49 2006 From: yochanon at localnet.com (John B) Date: Tue, 12 Dec 2006 09:21:49 -0600 Subject: [Ekiga-list] website problems with opera In-Reply-To: <20061212122911.XVAP17393.aamtaout02-winn.ispmail.ntl.com@smtp.ntlworld.com> References: <20061212122911.XVAP17393.aamtaout02-winn.ispmail.ntl.com@smtp.ntlworld.com> Message-ID: <200612120921.49393.yochanon@localnet.com> On Tuesday 12 December 2006 06:29, Leon Stringer wrote: > > From: Damien Sandras > > Date: 2006/12/12 Tue AM 08:32:36 GMT > > To: Ekiga mailing list > > Subject: Re: [Ekiga-list] website problems with opera > > > > Le mardi 12 d?cembre 2006 ? 19:13 +1100, Zebee Johnstone a ?crit : > > > Each time I try an FAQ link, or to download the program, I can't. > > > Because I just get the page I was on, with # appended. > > > > > > Is there any other reason that I must use firefox or mozilla if I want > > > to use ekiga? > > > > Provide a patch for the website. We'll apply it! > > Actually, have you tried this today? The FAQ doesn't seem to work with any > browser I've tried (Netscape, Firefox, Opera, IE). So in Firefox if I click > "Documentation & FAQ" at the top, then click the link "2. Ekiga Features" > on the FAQ page, I still get the same page (i.e. page 1), exactly what > Zebee reports. > > The reason I say have you tried this *today* is that I was looking through > the FAQ at the weekend and it was working fine... Oops...I spoke too soon. Doing the above that Leon did, did the same thing to me. -- Calling an illegal alien an 'undocumented worker', is like calling a home intruder an 'unwanted houseguest'. From dsandras at seconix.com Tue Dec 12 21:35:28 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 12 Dec 2006 22:35:28 +0100 Subject: [Ekiga-list] website problems with opera In-Reply-To: References: Message-ID: <1165959328.5858.37.camel@golgoth01> The admin had changed the configuration of the server without telling me. The problem is now fixed. Btw, the problem was not specific to OPERA. Le mardi 12 d?cembre 2006 ? 19:13 +1100, Zebee Johnstone a ?crit : > I find that the ekiga website seems unusable with opera. Which is a > shame, and not a great advert for the program either! > > Each time I try an FAQ link, or to download the program, I can't. > Because I just get the page I was on, with # appended. > > I admit to being worried about what else isn't going to work if the > site is that sensitive. > > Is there any other reason that I must use firefox or mozilla if I want > to use ekiga? > > Zebee > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From clement.jeanne at teamlog.com Tue Dec 12 08:42:41 2006 From: clement.jeanne at teamlog.com (teamlog) Date: Tue, 12 Dec 2006 00:42:41 -0800 (PST) Subject: [Ekiga-list] gatekeeper automatic discovery Message-ID: <7829386.post@talk.nabble.com> I'm a user of Gnomemeeting and I was using the automatic gatekeeper discovery which means the RAS message GatekeeperDiscovery to be broadcasted (255.255.255.255) to the network. It works perfect with gnomemeeting and gnugk and I'm able to move physicaly in a network and automatically register on the local gatekeeper. Why is this feature no more in Ekiga ? I've test Ekiga and it looks good but this is major problem that does not allow me to move to Ekiga... What can I do ? -- View this message in context: http://www.nabble.com/gatekeeper-automatic-discovery-tf2806239.html#a7829386 Sent from the Ekiga General mailing list archive at Nabble.com. From dsandras at seconix.com Thu Dec 14 14:12:34 2006 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 14 Dec 2006 15:12:34 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <7829386.post@talk.nabble.com> References: <7829386.post@talk.nabble.com> Message-ID: <1166105554.9401.0.camel@golgoth01> Le mardi 12 d?cembre 2006 ? 00:42 -0800, teamlog a ?crit : > I'm a user of Gnomemeeting and I was using the automatic gatekeeper discovery > which means the RAS message GatekeeperDiscovery to be broadcasted > (255.255.255.255) to the network. It works perfect with gnomemeeting and > gnugk and I'm able to move physicaly in a network and automatically register > on the local gatekeeper. > Why is this feature no more in Ekiga ? I've test Ekiga and it looks good but > this is major problem that does not allow me to move to Ekiga... > What can I do ? Ask for the gatekeeper settings to your administrator and add them in the Accounts Editor. It should work. But, yes, we have unfortunately removed "Automatic Discovery", but that shouldn't prevent you to register to the gatekeeper. Good luck! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From natali at poisson.phc.unipi.it Thu Dec 14 14:35:26 2006 From: natali at poisson.phc.unipi.it (fabio natali) Date: Thu, 14 Dec 2006 15:35:26 +0100 Subject: [Ekiga-list] voip + adsl contract Message-ID: <20061214143526.GA17005@poisson.phc.unipi.it> hi everybody, i can neither make nor receive phone calls with my ekiga sip account. i'm afraid this is due to tiscali, which provides me both with internet and telephone (voip) connection. i have been told by tiscali's guys that, due to their voip service, the following ports are unavailable to me: 1717, 1720, 10000-12000 and that i can't use any sip-based voip software. i'm wondering if there is some tricky way in order to let me use ekiga with my sip account, maybe with some ssh-tunneling or some kind of proxy. best regards, fabio. From clement.jeanne at teamlog.com Thu Dec 14 16:56:30 2006 From: clement.jeanne at teamlog.com (teamlog) Date: Thu, 14 Dec 2006 08:56:30 -0800 (PST) Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <1166105554.9401.0.camel@golgoth01> References: <7829386.post@talk.nabble.com> <1166105554.9401.0.camel@golgoth01> Message-ID: <7876453.post@talk.nabble.com> Damien Sandras wrote: > > Le mardi 12 d?cembre 2006 ? 00:42 -0800, teamlog a ?crit : >> I'm a user of Gnomemeeting and I was using the automatic gatekeeper >> discovery >> which means the RAS message GatekeeperDiscovery to be broadcasted >> (255.255.255.255) to the network. It works perfect with gnomemeeting and >> gnugk and I'm able to move physicaly in a network and automatically >> register >> on the local gatekeeper. >> Why is this feature no more in Ekiga ? I've test Ekiga and it looks good >> but >> this is major problem that does not allow me to move to Ekiga... >> What can I do ? > > Ask for the gatekeeper settings to your administrator and add them in > the Accounts Editor. It should work. > > But, yes, we have unfortunately removed "Automatic Discovery", but that > shouldn't prevent you to register to the gatekeeper. > > Good luck! > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > Thanks, no problem with the gatekeeper because I am the administrator as well. My last question is why "Automatic Discovery" has been removed ? security problem or something else ? Another question : how can I manage to get the same feature ? I mean, if my terminal move somewhere else in another network, get another IP address from DHCP and so on... how can I automatically register to the new local gatekeeper without seizing it's address ? I guess I can do something with an FQDN that can be resolved differently depending the place the terminal is, but I'm unsure. Or maybe the adresse of the local gatekeeper can be set by the DHCP process... Any idea ? -- View this message in context: http://www.nabble.com/gatekeeper-automatic-discovery-tf2806239.html#a7876453 Sent from the Ekiga General mailing list archive at Nabble.com. From dsandras at seconix.com Thu Dec 14 19:03:31 2006 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 14 Dec 2006 20:03:31 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <7876453.post@talk.nabble.com> References: <7829386.post@talk.nabble.com> <1166105554.9401.0.camel@golgoth01> <7876453.post@talk.nabble.com> Message-ID: <1166123011.3490.1.camel@golgoth01> Le jeudi 14 d?cembre 2006 ? 08:56 -0800, teamlog a ?crit : [...] > Thanks, > no problem with the gatekeeper because I am the administrator as well. > My last question is why "Automatic Discovery" has been removed ? security > problem or something else ? Just because I had no time to reimplement it yet :) Ekiga has migrated to a new stack, so much work was involved in SIP. > Another question : how can I manage to get the same feature ? I mean, if my > terminal move somewhere else in another network, get another IP address from > DHCP and so on... how can I automatically register to the new local > gatekeeper without seizing it's address ? I guess I can do something with an > FQDN that can be resolved differently depending the place the terminal is, > but I'm unsure. Or maybe the adresse of the local gatekeeper can be set by > the DHCP process... Any idea ? a VPN perhaps? It is the safest thing if you are always connecting to the same gatekeeper... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Dec 14 19:04:00 2006 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 14 Dec 2006 20:04:00 +0100 Subject: [Ekiga-list] voip + adsl contract In-Reply-To: <20061214143526.GA17005@poisson.phc.unipi.it> References: <20061214143526.GA17005@poisson.phc.unipi.it> Message-ID: <1166123040.3490.3.camel@golgoth01> Le jeudi 14 d?cembre 2006 ? 15:35 +0100, fabio natali a ?crit : > hi everybody, > > i can neither make nor receive phone calls with my ekiga sip account. > > i'm afraid this is due to tiscali, which provides me both with internet and > telephone (voip) connection. > > i have been told by tiscali's guys that, due to their voip service, the > following ports are unavailable to me: > > 1717, 1720, 10000-12000 > > and that i can't use any sip-based voip software. > > i'm wondering if there is some tricky way in order to let me use ekiga with > my sip account, maybe with some ssh-tunneling or some kind of proxy. > None that I know, unfortunately :( Perhaps try changing ports, but I fear the router is inspecting the SIP packets... -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From clement.jeanne at teamlog.com Fri Dec 15 09:27:36 2006 From: clement.jeanne at teamlog.com (teamlog) Date: Fri, 15 Dec 2006 01:27:36 -0800 (PST) Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <1166123011.3490.1.camel@golgoth01> References: <7829386.post@talk.nabble.com> <1166105554.9401.0.camel@golgoth01> <7876453.post@talk.nabble.com> <1166123011.3490.1.camel@golgoth01> Message-ID: <7888479.post@talk.nabble.com> Ok, you answered my main question. Is there a timetable for the "Automatic Discovery" to be reimplemented ? Or is this so much useless that the is much chance for it not to be reimplemented at anytime? Anyway, all my congratulations for the really great job you are doing. Regards Ps: I'm not allowed due to the architecture to register on the same gatekeeper each time. No VPN as well. But I'll try to investigate and let you know... Damien Sandras wrote: > > Le jeudi 14 d?cembre 2006 ? 08:56 -0800, teamlog a ?crit : > > [...] > >> Thanks, >> no problem with the gatekeeper because I am the administrator as well. >> My last question is why "Automatic Discovery" has been removed ? security >> problem or something else ? > > Just because I had no time to reimplement it yet :) > Ekiga has migrated to a new stack, so much work was involved in SIP. > >> Another question : how can I manage to get the same feature ? I mean, if >> my >> terminal move somewhere else in another network, get another IP address >> from >> DHCP and so on... how can I automatically register to the new local >> gatekeeper without seizing it's address ? I guess I can do something with >> an >> FQDN that can be resolved differently depending the place the terminal >> is, >> but I'm unsure. Or maybe the adresse of the local gatekeeper can be set >> by >> the DHCP process... Any idea ? > > a VPN perhaps? > > It is the safest thing if you are always connecting to the same > gatekeeper... > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -- View this message in context: http://www.nabble.com/gatekeeper-automatic-discovery-tf2806239.html#a7888479 Sent from the Ekiga General mailing list archive at Nabble.com. From jpuydt at free.fr Fri Dec 15 10:00:39 2006 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 15 Dec 2006 11:00:39 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <7888479.post@talk.nabble.com> References: <7829386.post@talk.nabble.com> <1166105554.9401.0.camel@golgoth01> <7876453.post@talk.nabble.com> <1166123011.3490.1.camel@golgoth01> <7888479.post@talk.nabble.com> Message-ID: <45827247.70500@free.fr> teamlog a ?crit : > Ok, you answered my main question. > Is there a timetable for the "Automatic Discovery" to be reimplemented ? Or > is this so much useless that the is much chance for it not to be > reimplemented at anytime? We have discovery of LAN contacts via avahi. Not sure if that's what you want. Snark From dsandras at seconix.com Fri Dec 15 12:21:58 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 15 Dec 2006 13:21:58 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <7888479.post@talk.nabble.com> References: <7829386.post@talk.nabble.com> <1166105554.9401.0.camel@golgoth01> <7876453.post@talk.nabble.com> <1166123011.3490.1.camel@golgoth01> <7888479.post@talk.nabble.com> Message-ID: <1166185318.3560.7.camel@golgoth01> Le vendredi 15 d?cembre 2006 ? 01:27 -0800, teamlog a ?crit : > Ok, you answered my main question. > Is there a timetable for the "Automatic Discovery" to be reimplemented ? Or > is this so much useless that the is much chance for it not to be > reimplemented at anytime? > Anyway, all my congratulations for the really great job you are doing. > I can not give a timetable unfortunately, but you can post a bug report in the bugtracker. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From craigs at postincrement.com Fri Dec 15 12:37:27 2006 From: craigs at postincrement.com (Craig Southeren) Date: Fri, 15 Dec 2006 23:37:27 +1100 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <7888479.post@talk.nabble.com> References: <1166123011.3490.1.camel@golgoth01> <7888479.post@talk.nabble.com> Message-ID: <20061215233620.A60D.CRAIGS@postincrement.com> On Fri, 15 Dec 2006 01:27:36 -0800 (PST) teamlog wrote: > > Ok, you answered my main question. Is there a timetable for the "Automatic Discovery" to be reimplemented ? Oris this so much useless that the is much chance for it not to bereimplemented at anytime? Anyway, all my congratulations for the really great job you are doing. > RegardsPs: I'm not allowed due to the architecture to register on the samegatekeeper each time. No VPN as well. But I'll try to investigate and letyou know... I'll add it to the ToDo list for OPAL :) Craig ----------------------------------------------------------------------- Craig Southeren Post Increment ? VoIP Consulting and Software craigs at postincrement.com.au www.postincrement.com.au Phone: +61 243654666 ICQ: #86852844 Fax: +61 243656905 MSN: craig_southeren at hotmail.com Mobile: +61 417231046 Jabber: craigs at jabber.org "It takes a man to suffer ignorance and smile. Be yourself, no matter what they say." Sting From craigs at postincrement.com Fri Dec 15 12:39:53 2006 From: craigs at postincrement.com (Craig Southeren) Date: Fri, 15 Dec 2006 23:39:53 +1100 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <45827247.70500@free.fr> References: <7888479.post@talk.nabble.com> <45827247.70500@free.fr> Message-ID: <20061215233801.A610.CRAIGS@postincrement.com> On Fri, 15 Dec 2006 11:00:39 +0100 Julien Puydt wrote: > teamlog a ?crit :> Ok, you answered my main question. > Is there a timetable for the "Automatic Discovery" to be reimplemented ? Or> is this so much useless that the is much chance for it not to be> reimplemented at anytime? > We have discovery of LAN contacts via avahi. > Not sure if that's what you want. H.323 has specific support for discovering gatekeepers using UDP broadcast. OpenH323 supports this mode, and it's relatively easy to implement except for the fact that Linux and Windows do UDP broadcast completely differently. Craig ----------------------------------------------------------------------- Craig Southeren Post Increment ? VoIP Consulting and Software craigs at postincrement.com.au www.postincrement.com.au Phone: +61 243654666 ICQ: #86852844 Fax: +61 243656905 MSN: craig_southeren at hotmail.com Mobile: +61 417231046 Jabber: craigs at jabber.org "It takes a man to suffer ignorance and smile. Be yourself, no matter what they say." Sting From isoster at hotmail.com Fri Dec 15 13:38:58 2006 From: isoster at hotmail.com (jos S) Date: Fri, 15 Dec 2006 14:38:58 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery Message-ID: hello i wont to get out off dis group how to do it thanks for all help but i doint wont no mail no more happie chrismus jos in liefde ---------------------------------------- > Date: Fri, 15 Dec 2006 01:27:36 -0800 > From: clement.jeanne at teamlog.com > To: ekiga-list at gnome.org > Subject: Re: [Ekiga-list] gatekeeper automatic discovery > > > Ok, you answered my main question. > Is there a timetable for the "Automatic Discovery" to be reimplemented ? Or > is this so much useless that the is much chance for it not to be > reimplemented at anytime? > Anyway, all my congratulations for the really great job you are doing. > > Regards > Ps: I'm not allowed due to the architecture to register on the same > gatekeeper each time. No VPN as well. But I'll try to investigate and let > you know... > > > Damien Sandras wrote: > > > > Le jeudi 14 d?cembre 2006 ? 08:56 -0800, teamlog a ?crit : > > > > [...] > > > >> Thanks, > >> no problem with the gatekeeper because I am the administrator as well. > >> My last question is why "Automatic Discovery" has been removed ? security > >> problem or something else ? > > > > Just because I had no time to reimplement it yet :) > > Ekiga has migrated to a new stack, so much work was involved in SIP. > > > >> Another question : how can I manage to get the same feature ? I mean, if > >> my > >> terminal move somewhere else in another network, get another IP address > >> from > >> DHCP and so on... how can I automatically register to the new local > >> gatekeeper without seizing it's address ? I guess I can do something with > >> an > >> FQDN that can be resolved differently depending the place the terminal > >> is, > >> but I'm unsure. Or maybe the adresse of the local gatekeeper can be set > >> by > >> the DHCP process... Any idea ? > > > > a VPN perhaps? > > > > It is the safest thing if you are always connecting to the same > > gatekeeper... > > -- > > _ Damien Sandras > > (o- > > //\ Ekiga Softphone : http://www.ekiga.org/ > > v_/_ NOVACOM : http://www.novacom.be/ > > FOSDEM : http://www.fosdem.org/ > > SIP Phone : sip:dsandras at ekiga.net > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > -- > View this message in context: http://www.nabble.com/gatekeeper-automatic-discovery-tf2806239.html#a7888479 > Sent from the Ekiga General mailing list archive at Nabble.com. > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list _________________________________________________________________ Probeer Live.com: je eigen persoonlijke opstartpagina met alleen de dingen die jij belangrijk vindt op ??n plek. http://www.live.com/getstarted From cannewilson at tiscali.co.uk Fri Dec 15 15:53:41 2006 From: cannewilson at tiscali.co.uk (Anne Wilson) Date: Fri, 15 Dec 2006 15:53:41 +0000 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: References: Message-ID: <200612151553.41267.cannewilson@tiscali.co.uk> On Friday 15 December 2006 13:38, jos S wrote: > hello i wont to get out off dis group how to do it > thanks for all help but i doint wont no mail no more > happie chrismus > Instructions are in the 'Full headers': List-Unsubscribe: , Anne From jpuydt at free.fr Fri Dec 15 16:27:01 2006 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 15 Dec 2006 17:27:01 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <200612151553.41267.cannewilson@tiscali.co.uk> References: <200612151553.41267.cannewilson@tiscali.co.uk> Message-ID: <4582CCD5.60108@free.fr> Anne Wilson a ?crit : > On Friday 15 December 2006 13:38, jos S wrote: >> hello i wont to get out off dis group how to do it >> thanks for all help but i doint wont no mail no more >> happie chrismus >> > Instructions are in the 'Full headers': There's also how each and every message ends : >___________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list I'm always impressed how people managed to subscribe, but cannot find the skills to unsubscribe for some reason... Snark From isoster at hotmail.com Fri Dec 15 16:28:56 2006 From: isoster at hotmail.com (jos S) Date: Fri, 15 Dec 2006 17:28:56 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery Message-ID: last paswordt to long ago help please jos in liefde ---------------------------------------- > Date: Fri, 15 Dec 2006 17:27:01 +0100 > From: jpuydt at free.fr > To: ekiga-list at gnome.org > Subject: Re: [Ekiga-list] gatekeeper automatic discovery > > Anne Wilson a ?crit : > > On Friday 15 December 2006 13:38, jos S wrote: > >> hello i wont to get out off dis group how to do it > >> thanks for all help but i doint wont no mail no more > >> happie chrismus > >> > > Instructions are in the 'Full headers': > > There's also how each and every message ends : > > >___________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > I'm always impressed how people managed to subscribe, but cannot find > the skills to unsubscribe for some reason... > > Snark > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list _________________________________________________________________ Leef je uit: ontwerp je startpagina precies zoals jij het wil hebben op Live.nl. http://www.live.com/getstarted From isoster at hotmail.com Fri Dec 15 16:37:02 2006 From: isoster at hotmail.com (jos S) Date: Fri, 15 Dec 2006 17:37:02 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery Message-ID: how to get my paswordt to unsubscribe dis is shit i wont to go out but doint no my fucking paswordt againg jos in liefde ---------------------------------------- > From: isoster at hotmail.com > To: ekiga-list at gnome.org > Date: Fri, 15 Dec 2006 17:28:56 +0100 > Subject: Re: [Ekiga-list] gatekeeper automatic discovery > > > last paswordt to long ago > help please > > jos in liefde > > ---------------------------------------- > > Date: Fri, 15 Dec 2006 17:27:01 +0100 > > From: jpuydt at free.fr > > To: ekiga-list at gnome.org > > Subject: Re: [Ekiga-list] gatekeeper automatic discovery > > > > Anne Wilson a ?crit : > > > On Friday 15 December 2006 13:38, jos S wrote: > > >> hello i wont to get out off dis group how to do it > > >> thanks for all help but i doint wont no mail no more > > >> happie chrismus > > >> > > > Instructions are in the 'Full headers': > > > > There's also how each and every message ends : > > > > >___________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > I'm always impressed how people managed to subscribe, but cannot find > > the skills to unsubscribe for some reason... > > > > Snark > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _________________________________________________________________ > Leef je uit: ontwerp je startpagina precies zoals jij het wil hebben op Live.nl. > http://www.live.com/getstarted > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list _________________________________________________________________ Leef je uit: ontwerp je startpagina precies zoals jij het wil hebben op Live.nl. http://www.live.com/getstarted From dsandras at seconix.com Fri Dec 15 16:51:39 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 15 Dec 2006 17:51:39 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: References: Message-ID: <1166201499.8078.2.camel@golgoth01> Le vendredi 15 d?cembre 2006 ? 17:37 +0100, jos S a ?crit : > how to get my paswordt to unsubscribe dis is shit i wont to go out but doint no my fucking paswordt againg > > To get out of this shit, and get back your fucking password, you need to visit this URL : > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list At the bottom of the page, you will see : "To unsubscribe from ekiga-list, get a password reminder, or change your subscription options enter your subscription email address:" Is that so complicated? We already told you twice the same thing. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From cannewilson at tiscali.co.uk Fri Dec 15 16:53:53 2006 From: cannewilson at tiscali.co.uk (Anne Wilson) Date: Fri, 15 Dec 2006 16:53:53 +0000 Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: References: Message-ID: <200612151653.59161.cannewilson@tiscali.co.uk> On Friday 15 December 2006 16:37, jos S wrote: > how to get my paswordt to unsubscribe dis is shit i wont to go out but > doint no my fucking paswordt againg > Moderate your language, please. Go to this link: > http://mail.gnome.org/mailman/listinfo/ekiga-list Then click the bottom button - Unsubscribe or edit options. At the bottom of the resulting page is a button for requesting a reminder of your password. Anne -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From k035056 at kyoto-wu.ac.jp Fri Dec 15 17:18:46 2006 From: k035056 at kyoto-wu.ac.jp (Manami Ozaki) Date: Sat, 16 Dec 2006 02:18:46 +0900 (JST) Subject: [Ekiga-list] Bandwidth over 100kbps? Message-ID: <20061216021846.49BA0884@kyoto-wu.ac.jp> Hi, I want to use bandwidth over 100kbps. How can I do that? Thanks in advance. *************** Manami Ozaki From isoster at hotmail.com Fri Dec 15 19:10:45 2006 From: isoster at hotmail.com (jos S) Date: Fri, 15 Dec 2006 20:10:45 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery Message-ID: sorry did dis like 10000 times nothing works jos in liefde ---------------------------------------- > From: dsandras at seconix.com > To: ekiga-list at gnome.org > Date: Fri, 15 Dec 2006 17:51:39 +0100 > Subject: Re: [Ekiga-list] gatekeeper automatic discovery > > Le vendredi 15 d?cembre 2006 ? 17:37 +0100, jos S a ?crit : > > how to get my paswordt to unsubscribe dis is shit i wont to go out but doint no my fucking paswordt againg > > > > > > To get out of this shit, and get back your fucking password, you need to > visit this URL : > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > At the bottom of the page, you will see : > "To unsubscribe from ekiga-list, get a password reminder, or change your > subscription options enter your subscription email address:" > > Is that so complicated? > > We already told you twice the same thing. > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list _________________________________________________________________ Probeer Live.com: jouw leven online met nieuws, sport, weer en nog veel meer. http://www.live.com/getstarted From isoster at hotmail.com Fri Dec 15 19:13:32 2006 From: isoster at hotmail.com (jos S) Date: Fri, 15 Dec 2006 20:13:32 +0100 Subject: [Ekiga-list] gatekeeper automatic discovery Message-ID: A reminder of your password has been emailed to you.ekiga-list list: member options for user isoster at hotmail.com but doint see nothing sorry i did all like you told my to do jos in liefde ---------------------------------------- > From: isoster at hotmail.com > To: ekiga-list at gnome.org > Date: Fri, 15 Dec 2006 20:10:45 +0100 > Subject: Re: [Ekiga-list] gatekeeper automatic discovery > > > sorry did dis like 10000 times nothing works > > > jos in liefde > > ---------------------------------------- > > From: dsandras at seconix.com > > To: ekiga-list at gnome.org > > Date: Fri, 15 Dec 2006 17:51:39 +0100 > > Subject: Re: [Ekiga-list] gatekeeper automatic discovery > > > > Le vendredi 15 d?cembre 2006 ? 17:37 +0100, jos S a ?crit : > > > how to get my paswordt to unsubscribe dis is shit i wont to go out but doint no my fucking paswordt againg > > > > > > > > > > To get out of this shit, and get back your fucking password, you need to > > visit this URL : > > > > > _______________________________________________ > > > ekiga-list mailing list > > > ekiga-list at gnome.org > > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > At the bottom of the page, you will see : > > "To unsubscribe from ekiga-list, get a password reminder, or change your > > subscription options enter your subscription email address:" > > > > Is that so complicated? > > > > We already told you twice the same thing. > > -- > > _ Damien Sandras > > (o- > > //\ Ekiga Softphone : http://www.ekiga.org/ > > v_/_ NOVACOM : http://www.novacom.be/ > > FOSDEM : http://www.fosdem.org/ > > SIP Phone : sip:dsandras at ekiga.net > > > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _________________________________________________________________ > Probeer Live.com: jouw leven online met nieuws, sport, weer en nog veel meer. > http://www.live.com/getstarted > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list _________________________________________________________________ Leef je uit: ontwerp je startpagina precies zoals jij het wil hebben op Live.nl. http://www.live.com/getstarted From franz.fuder at ifaz.de Fri Dec 15 23:56:18 2006 From: franz.fuder at ifaz.de (franz.fuder at ifaz.de) Date: Sat, 16 Dec 2006 00:56:18 +0100 (CET) Subject: [Ekiga-list] No audio plungin found on X64 Message-ID: <41242.86.129.127.132.1166226978.squirrel@webmail.kamp-dsl.de> There is a problem in the pwlib and opal buid. In opal there is no check for the X64 libs and in pwlib the check does not chance the lib to /usr/lib64. I tried to fix this but I have no glue how the opal build system works, so I can't fix it. My workaround is make a symbolic link from /usr/lib/pwlib to /usr/lib64/pwlib. I suppose this is a worse hack. However ekiga runs now on my x64 machine. Hopefully this info helps. Franz From james at fsck.co.uk Sat Dec 16 01:02:20 2006 From: james at fsck.co.uk (A. James Lewis) Date: Sat, 16 Dec 2006 01:02:20 +0000 Subject: [Ekiga-list] No audio plungin found on X64 In-Reply-To: <41242.86.129.127.132.1166226978.squirrel@webmail.kamp-dsl.de> References: <41242.86.129.127.132.1166226978.squirrel@webmail.kamp-dsl.de> Message-ID: <1166230940.5017.8.camel@trinity.fsck.co.uk> I also found that ekiga doesn't try very hard to find pwlib... since pwlib isn't really a "library" as the OS understands it, it will not help to add it to ld.so.conf... it looks only where hard coded to look, /lib... I hope this could be a bit more flexable at runtime... ekiga could either look at the config, ld.so.conf or allow the pwlib location to be configured... I've not tried with a 64 bit machine, but this can also be an issue on 32 bits. On Sat, 2006-12-16 at 00:56 +0100, franz.fuder at ifaz.de wrote: > There is a problem in the pwlib and opal buid. In opal there is no check > for the X64 libs and in pwlib the check does not chance the lib to > /usr/lib64. > > I tried to fix this but I have no glue how the opal build system works, so > I can't fix it. > > My workaround is make a symbolic link from /usr/lib/pwlib to > /usr/lib64/pwlib. I suppose this is a worse hack. However ekiga runs now > on my x64 machine. > > Hopefully this info helps. > > Franz > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From jan.schampera at web.de Sat Dec 16 09:44:51 2006 From: jan.schampera at web.de (Jan Schampera) Date: Sat, 16 Dec 2006 10:44:51 +0100 Subject: [Ekiga-list] No audio plungin found on X64 In-Reply-To: <1166230940.5017.8.camel@trinity.fsck.co.uk> References: <41242.86.129.127.132.1166226978.squirrel@webmail.kamp-dsl.de> <1166230940.5017.8.camel@trinity.fsck.co.uk> Message-ID: <20061216104451.0baf003e@localhost.localdomain> On Sat, 16 Dec 2006 01:02:20 +0000 "A. James Lewis" wrote: > I also found that ekiga doesn't try very hard to find pwlib... since > pwlib isn't really a "library" as the OS understands it, it will not > help to add it to ld.so.conf... it looks only where hard coded to > look, /lib... I hope this could be a bit more flexable at > runtime... ekiga could either look at the config, ld.so.conf or allow > the pwlib location to be configured... I've not tried with a 64 bit > machine, but this can also be an issue on 32 bits. True for the plugins in some way. But PWLib itself is searched and found by the dynamic linker, it IS a "normal" library. J. -- Once you've got the perfect hammer, everything looks like a nail. From dsandras at seconix.com Sat Dec 16 10:36:40 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 16 Dec 2006 11:36:40 +0100 Subject: [Ekiga-list] Bandwidth over 100kbps? In-Reply-To: <20061216021846.49BA0884@kyoto-wu.ac.jp> References: <20061216021846.49BA0884@kyoto-wu.ac.jp> Message-ID: <1166265400.3530.5.camel@golgoth01> Hi, You need to unlock the value in the C++ code. Le samedi 16 d?cembre 2006 ? 02:18 +0900, Manami Ozaki a ?crit : > Hi, > > I want to use bandwidth over 100kbps. > How can I do that? > > Thanks in advance. > > *************** > Manami Ozaki > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From james at fsck.co.uk Sat Dec 16 10:37:08 2006 From: james at fsck.co.uk (A. James Lewis) Date: Sat, 16 Dec 2006 10:37:08 +0000 Subject: [Ekiga-list] No audio plungin found on X64 In-Reply-To: <20061216104451.0baf003e@localhost.localdomain> References: <41242.86.129.127.132.1166226978.squirrel@webmail.kamp-dsl.de> <1166230940.5017.8.camel@trinity.fsck.co.uk> <20061216104451.0baf003e@localhost.localdomain> Message-ID: <1166265428.5017.14.camel@trinity.fsck.co.uk> On Sat, 2006-12-16 at 10:44 +0100, Jan Schampera wrote: > On Sat, 16 Dec 2006 01:02:20 +0000 > "A. James Lewis" wrote: > > > I also found that ekiga doesn't try very hard to find pwlib... since > > pwlib isn't really a "library" as the OS understands it, it will not > > help to add it to ld.so.conf... it looks only where hard coded to > > look, /lib... I hope this could be a bit more flexable at > > runtime... ekiga could either look at the config, ld.so.conf or allow > > the pwlib location to be configured... I've not tried with a 64 bit > > machine, but this can also be an issue on 32 bits. > > True for the plugins in some way. But PWLib itself is searched and found > by the dynamic linker, it IS a "normal" library. > I found that a version of ekiga installed in /usr/local, will not find its pwlib codecs in /usr/lib... I think that mabe there is an arguement for having a few fallback locations if the compile time option is not available.... /usr/lib, /usr/local/lib and the 64 bit equivalents would be a good start... Is there any reason not to do this? > J. > From dsandras at seconix.com Sat Dec 16 10:53:43 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 16 Dec 2006 11:53:43 +0100 Subject: [Ekiga-list] No audio plungin found on X64 In-Reply-To: <1166265428.5017.14.camel@trinity.fsck.co.uk> References: <41242.86.129.127.132.1166226978.squirrel@webmail.kamp-dsl.de> <1166230940.5017.8.camel@trinity.fsck.co.uk> <20061216104451.0baf003e@localhost.localdomain> <1166265428.5017.14.camel@trinity.fsck.co.uk> Message-ID: <1166266423.3530.12.camel@golgoth01> Le samedi 16 d?cembre 2006 ? 10:37 +0000, A. James Lewis a ?crit : > On Sat, 2006-12-16 at 10:44 +0100, Jan Schampera wrote: > > On Sat, 16 Dec 2006 01:02:20 +0000 > > "A. James Lewis" wrote: > > > > > I also found that ekiga doesn't try very hard to find pwlib... since > > > pwlib isn't really a "library" as the OS understands it, it will not > > > help to add it to ld.so.conf... it looks only where hard coded to > > > look, /lib... I hope this could be a bit more flexable at > > > runtime... ekiga could either look at the config, ld.so.conf or allow > > > the pwlib location to be configured... I've not tried with a 64 bit > > > machine, but this can also be an issue on 32 bits. > > > > True for the plugins in some way. But PWLib itself is searched and found > > by the dynamic linker, it IS a "normal" library. > > > I found that a version of ekiga installed in /usr/local, will not find > its pwlib codecs in /usr/lib... I think that mabe there is an arguement > for having a few fallback locations if the compile time option is not > available.... /usr/lib, /usr/local/lib and the 64 bit equivalents would > be a good start... Is there any reason not to do this? > Ekiga does not look for the plugins itself, but PWLIB is doing it, independently of the location from which Ekiga is executed. When you compile PWLIB, you give a --prefix option (defaults to /usr/local/), that option determines where plugins will be installed, and where it should look for them. If it doesn't find the plugins, it means that : - you have not run make install - you have conflicting versions installed and the process is not linked to the version of the library you expect it to be linked -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From franz.fuder at ifaz.de Sat Dec 16 11:48:51 2006 From: franz.fuder at ifaz.de (franz.fuder at ifaz.de) Date: Sat, 16 Dec 2006 12:48:51 +0100 (CET) Subject: [Ekiga-list] No audio plungin found on X64 In-Reply-To: <1166266423.3530.12.camel@golgoth01> References: <41242.86.129.127.132.1166226978.squirrel@webmail.kamp-dsl.de> <1166230940.5017.8.camel@trinity.fsck.co.uk> <20061216104451.0baf003e@localhost.localdomain> <1166265428.5017.14.camel@trinity.fsck.co.uk> <1166266423.3530.12.camel@golgoth01> Message-ID: <50930.86.129.127.132.1166269731.squirrel@webmail.kamp-dsl.de> Am Sa, 16.12.2006, 11:53, schrieb Damien Sandras: > Le samedi 16 d?cembre 2006 ? 10:37 +0000, A. James Lewis a ?crit : > >> On Sat, 2006-12-16 at 10:44 +0100, Jan Schampera wrote: >> >>> On Sat, 16 Dec 2006 01:02:20 +0000 >>> "A. James Lewis" wrote: >>> >>> >>>> I also found that ekiga doesn't try very hard to find pwlib... >>>> since pwlib isn't really a "library" as the OS understands it, it >>>> will not help to add it to ld.so.conf... it looks only where hard >>>> coded to look, /lib... I hope this could be a bit more >>>> flexable at runtime... ekiga could either look at the config, >>>> ld.so.conf or allow the pwlib location to be configured... I've not >>>> tried with a 64 bit machine, but this can also be an issue on 32 >>>> bits. >>> >>> True for the plugins in some way. But PWLib itself is searched and >>> found by the dynamic linker, it IS a "normal" library. >>> >> I found that a version of ekiga installed in /usr/local, will not find >> its pwlib codecs in /usr/lib... I think that mabe there is an arguement >> for having a few fallback locations if the compile time option is not >> available.... /usr/lib, /usr/local/lib and the 64 bit equivalents would >> be a good start... Is there any reason not to do this? >> > > Ekiga does not look for the plugins itself, but PWLIB is doing it, > independently of the location from which Ekiga is executed. > > When you compile PWLIB, you give a --prefix option (defaults > to /usr/local/), that option determines where plugins will be installed, > and where it should look for them. > > If it doesn't find the plugins, it means that : > - you have not run make install > - you have conflicting versions installed and the process is not linked > to the version of the library you expect it to be linked -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : > http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > > _______________________________________________ > ekiga-list mailing list ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > My experience is different. I installed with checkinstall and prefix /usr. All the staff end then in /usr/lib below /usr which is in one sense correct. However, ekiga is searching the plugins (audio and vidio) in /usr/lib64. It is easy to see this, I made just a symbolic link from /usr/lib/pwlib to /usr/lib64 and this fixes the problem. For me this is fine, but I suppose a lot of other x64 user will have problems. Pwlib and opal has different build systems. Pwlib is taking care of diffrent OS and machtype but opal did not even look at this. Unfourtunatelly I do not understand enough, if I would I would fix it. I did it succesfully for pwib but opal donsn't work. so it make no sense to send the patch. Checkinstall works fine, I run it also on a 32 bit system and everything worked fine without any problems, so it is not due to checkinstall it is a problem with opal and pwlib I guess Franz From isoster at hotmail.com Sat Dec 16 12:41:49 2006 From: isoster at hotmail.com (jos S) Date: Sat, 16 Dec 2006 13:41:49 +0100 Subject: [Ekiga-list] No audio plungin found on X64 Message-ID: please doint send my mails no more dis un do shit dus not work jos in liefde ---------------------------------------- > Date: Sat, 16 Dec 2006 10:44:51 +0100 > From: jan.schampera at web.de > To: ekiga-list at gnome.org > Subject: Re: [Ekiga-list] No audio plungin found on X64 > > On Sat, 16 Dec 2006 01:02:20 +0000 > "A. James Lewis" wrote: > > > I also found that ekiga doesn't try very hard to find pwlib... since > > pwlib isn't really a "library" as the OS understands it, it will not > > help to add it to ld.so.conf... it looks only where hard coded to > > look, /lib... I hope this could be a bit more flexable at > > runtime... ekiga could either look at the config, ld.so.conf or allow > > the pwlib location to be configured... I've not tried with a 64 bit > > machine, but this can also be an issue on 32 bits. > > True for the plugins in some way. But PWLib itself is searched and found > by the dynamic linker, it IS a "normal" library. > > J. > > -- > Once you've got the perfect hammer, everything looks like a nail. > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list _________________________________________________________________ Probeer Live.com: je eigen persoonlijke opstartpagina met alleen de dingen die jij belangrijk vindt op ??n plek. http://www.live.com/getstarted From jpuydt at free.fr Sat Dec 16 14:31:25 2006 From: jpuydt at free.fr (Julien Puydt) Date: Sat, 16 Dec 2006 15:31:25 +0100 Subject: [Ekiga-list] No audio plungin found on X64 In-Reply-To: References: Message-ID: <4584033D.5090405@free.fr> jos S a ?crit : > please doint send my mails no more dis un do shit dus not work Get a brain. You subscribed, you unsubscribe. We won't stop using the list because some lamer is unable to unsubscribe. Snark From martin at swift.is Sat Dec 16 21:09:00 2006 From: martin at swift.is (Martin Swift) Date: Sat, 16 Dec 2006 21:09:00 +0000 Subject: [Ekiga-list] Security check failed Message-ID: <20061216210900.GD28740@swift.is> Dear Ekiga community, Today, I have been trying to get Ekiga to work on my machine (Gentoo Linux x86). It took a little while to get an understanding of how some of the pieces fit together, but with the help of a few resources I think I've got it down. Still, one problem eludes me which I'm hoping someone here might be able to help me with. When trying to make a call, I get the error Security check failed in the status line at the bottom of the main GUI window. The "General History" ( Tools > General History ) tool logs 20:36:18 Calling sip:004989xxxxxxxx at eugw.ast.diamondcard.us 20:36:19 Security check failed [x-es inserted for privacy]. This actually happened before when I hadn't learnt how to properly register my PC-to-Phone Account properly. Currently, I have the following settings: In "PC-To-Phone Settings" ( Tools > PC-To-Phone Account ) I have "Account number" and "Password" set to the "Account ID" and "PIN code", respectively, as listed on my Diamondcard (diamondcard.us) account "Home" page. After registering with Diamondcard and charging the account, applying these settings seemed to connect me properly to Diamondcard according to the "General History": 19:28:36 Registered to eugw.ast.diamondcard.us I have two accounts registered in the "Accounts" ( Edit > Accounts ) dialog, * ekiga.net SIP Service: set according to my ekiga.net account * Ekiga PC-To-Phone: set according to my diamondcard.us account as described in the previous paragraph. The latter I set to default. Everything seems to be set up correctly according to the Documentation and FAQ, but connecting still results in the "Security check" failure. Does anyone have any suggestions as to where my problem may lie? Just in case the error might be misleading me, I've tried connecting to all of sip:004989xxxxxxxx sip:4989xxxxxxxx 004989xxxxxxxx 4989xxxxxxxx sip:004989xxxxxxxx at eugw.ast.diamondcard.us without any difference. Sincerely, Martin Swift -- \u270C From dsandras at seconix.com Sun Dec 17 10:39:50 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 17 Dec 2006 11:39:50 +0100 Subject: [Ekiga-list] Security check failed In-Reply-To: <20061216210900.GD28740@swift.is> References: <20061216210900.GD28740@swift.is> Message-ID: <1166351990.3520.0.camel@golgoth01> Hi, can you post the output of ekiga -d 4 when the problem occurs somewhere? Thanks, Le samedi 16 d?cembre 2006 ? 21:09 +0000, Martin Swift a ?crit : > Dear Ekiga community, > > Today, I have been trying to get Ekiga to work on my machine (Gentoo > Linux x86). It took a little while to get an understanding of how some > of the pieces fit together, but with the help of a few resources I > think I've got it down. > > Still, one problem eludes me which I'm hoping someone here might be > able to help me with. When trying to make a call, I get the error > Security check failed > in the status line at the bottom of the main GUI window. The "General > History" ( Tools > General History ) tool logs > 20:36:18 Calling sip:004989xxxxxxxx at eugw.ast.diamondcard.us > 20:36:19 Security check failed > [x-es inserted for privacy]. > > This actually happened before when I hadn't learnt how to properly > register my PC-to-Phone Account properly. Currently, I have the > following settings: > > In "PC-To-Phone Settings" ( Tools > PC-To-Phone Account ) I have > "Account number" and "Password" set to the "Account ID" and "PIN > code", respectively, as listed on my Diamondcard (diamondcard.us) > account "Home" page. After registering with Diamondcard and charging > the account, applying these settings seemed to connect me properly to > Diamondcard according to the "General History": > 19:28:36 Registered to eugw.ast.diamondcard.us > > I have two accounts registered in the "Accounts" ( Edit > Accounts ) > dialog, > * ekiga.net SIP Service: set according to my ekiga.net account > * Ekiga PC-To-Phone: set according to my diamondcard.us account as > described in the previous paragraph. > The latter I set to default. > > Everything seems to be set up correctly according to the Documentation > and FAQ, but connecting still results in the "Security check" failure. > Does anyone have any suggestions as to where my problem may lie? > > Just in case the error might be misleading me, I've tried connecting > to all of > sip:004989xxxxxxxx > sip:4989xxxxxxxx > 004989xxxxxxxx > 4989xxxxxxxx > sip:004989xxxxxxxx at eugw.ast.diamondcard.us > without any difference. > > Sincerely, > Martin Swift > -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From martin at swift.is Sun Dec 17 15:01:58 2006 From: martin at swift.is (Martin Swift) Date: Sun, 17 Dec 2006 15:01:58 +0000 Subject: [Ekiga-list] Security check failed In-Reply-To: <1166351990.3520.0.camel@golgoth01> References: <20061216210900.GD28740@swift.is> <1166351990.3520.0.camel@golgoth01> Message-ID: <20061217150158.GE28740@swift.is> On Sun, Dec 17, 2006 at 11:39:50AM +0100, Damien Sandras wrote: > Hi, > > can you post the output of ekiga -d 4 when the problem occurs somewhere? No, because I just tried and Ekiga worked without a hitch. :-) Sound was a bit shaky, but the connection is there. Sorry to bother you and thanks for the reply! Cheers, Martin -- \u270C From dsandras at seconix.com Sun Dec 17 22:48:02 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 17 Dec 2006 23:48:02 +0100 Subject: [Ekiga-list] No audio plungin found on X64 In-Reply-To: <50930.86.129.127.132.1166269731.squirrel@webmail.kamp-dsl.de> References: <41242.86.129.127.132.1166226978.squirrel@webmail.kamp-dsl.de> <1166230940.5017.8.camel@trinity.fsck.co.uk> <20061216104451.0baf003e@localhost.localdomain> <1166265428.5017.14.camel@trinity.fsck.co.uk> <1166266423.3530.12.camel@golgoth01> <50930.86.129.127.132.1166269731.squirrel@webmail.kamp-dsl.de> Message-ID: <1166395682.9072.16.camel@golgoth01> Le samedi 16 d?cembre 2006 ? 12:48 +0100, franz.fuder at ifaz.de a ?crit : > My experience is different. I installed with checkinstall and prefix /usr. > All the staff end then in /usr/lib below /usr which is in one sense > correct. However, ekiga is searching the plugins (audio and vidio) in > /usr/lib64. > It is easy to see this, I made just a symbolic link from /usr/lib/pwlib to > /usr/lib64 and this fixes the problem. > > For me this is fine, but I suppose a lot of other x64 user will have > problems. Pwlib and opal has different build systems. Pwlib is taking care > of diffrent OS and machtype but opal did not even look at this. > > Unfourtunatelly I do not understand enough, if I would I would fix it. I > did it succesfully for pwib but opal donsn't work. so it make no sense to > send the patch. > > Checkinstall works fine, I run it also on a 32 bit system and everything > worked fine without any problems, so it is not due to checkinstall it is a > problem with opal and pwlib I guess Can you report a bug here in the OPAL bugtracker: http://sourceforge.net/projects/openh323/ (Follow Tracker->Bugs) Thanks, -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From clement.jeanne at teamlog.com Mon Dec 18 08:59:07 2006 From: clement.jeanne at teamlog.com (teamlog) Date: Mon, 18 Dec 2006 00:59:07 -0800 (PST) Subject: [Ekiga-list] gatekeeper automatic discovery In-Reply-To: <1166185318.3560.7.camel@golgoth01> References: <7829386.post@talk.nabble.com> <1166105554.9401.0.camel@golgoth01> <7876453.post@talk.nabble.com> <1166123011.3490.1.camel@golgoth01> <7888479.post@talk.nabble.com> <1166185318.3560.7.camel@golgoth01> Message-ID: <7925404.post@talk.nabble.com> Thanks everybody for answering my questions. I'll look after every future version of Ekiga. Regards Damien Sandras wrote: > > Le vendredi 15 d?cembre 2006 ? 01:27 -0800, teamlog a ?crit : >> Ok, you answered my main question. >> Is there a timetable for the "Automatic Discovery" to be reimplemented ? >> Or >> is this so much useless that the is much chance for it not to be >> reimplemented at anytime? >> Anyway, all my congratulations for the really great job you are doing. >> > > I can not give a timetable unfortunately, but you can post a bug report > in the bugtracker. > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > -- View this message in context: http://www.nabble.com/gatekeeper-automatic-discovery-tf2806239.html#a7925404 Sent from the Ekiga General mailing list archive at Nabble.com. From spluque at gmail.com Mon Dec 18 21:01:47 2006 From: spluque at gmail.com (Seb) Date: Mon, 18 Dec 2006 15:01:47 -0600 Subject: [Ekiga-list] webcam "no space left on device" error Message-ID: <87psagex50.fsf@patagonia.sebmags.homelinux.org> Hi (apologies if this has been read in the debian amd64 ng, where this was first posted, but without any followups), Details on my webcam and where I have it attached are: ,-----[ lsusb ] | Bus 002 Device 001: ID 0000:0000 | Bus 001 Device 005: ID 0461:4d16 Primax Electronics, Ltd | Bus 001 Device 003: ID 045e:00db Microsoft Corp. | Bus 001 Device 004: ID 058f:9360 Alcor Micro Corp. | Bus 001 Device 006: ID 0c45:6029 Microdia Triplex i-mini PC Camera | Bus 001 Device 002: ID 04e8:324c Samsung Electronics Co., Ltd ML-1740 Printer | Bus 001 Device 001: ID 0000:0000 `----- Standard video conference software, e.g. kopete, ekiga, cannot communicate with this webcam and show a "no device found" message (ekiga), but no other useful error messages. I was able to get something with the program sn-webcam (http://sourceforge.net/project/showfiles.php?group_id=132181), but all I got was a "no space left on device" message. Googling for this, it seemed it had to do with the bus device being saturated by the other usb devices. So I tried plugging the webcam to one of the ports in the front panel of my desktop or the back, without success -- I think Bus 001 above is the back one, while Bus 002 is the front one. If I unplug the webcam from the bus shown above, dmesg gives some lines with errors: ,-----[ dmesg | tail ] | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a370 (#81) state 2 | usb 1-8: usb_submit_urb() failed, error -28 | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a3c0 (#81) state 2 | usb 1-8: usb_submit_urb() failed, error -28 | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a410 (#81) state 2 | usb 1-8: usb_submit_urb() failed, error -28 | usb 1-8: USB disconnect, address 6 | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a460 (#81) state 2 | usb 1-8: Disconnecting SN9C10x PC Camera... | usb 1-8: V4L2 device /dev/video0 deregistered `----- and reconnecting causes the system to freeze completely. This camera uses the sn9c102 driver and it does seem to be loaded: ,-----[ lsmod | grep 'sn9c' ] | sn9c102 94732 0 | videodev 29696 1 sn9c102 | v4l2_common 28672 2 sn9c102,videodev `----- Is anybody having similar problems? Any pointers? Thanks in advance. Cheers, -- Seb From ubuntu at kurtkraut.net Mon Dec 18 23:14:56 2006 From: ubuntu at kurtkraut.net (Kurt Kraut) Date: Mon, 18 Dec 2006 21:14:56 -0200 Subject: [Ekiga-list] How can I record an Ekiga conversation ? Message-ID: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> Hi, Most current podcasts about Free Software uses Skype to keep a conversation between different hosts/interviewers in different locations. But sounds not correct to me to talk about Free Software using a proprietary plataform. So, anyone could give me any hint or recipe to me telling how I could record Ekiga conversations ? I'm currently using an Ubuntu system. Thanks in advance, Kurt Kraut From yohann.martineau at nexcom.fr Tue Dec 19 08:06:03 2006 From: yohann.martineau at nexcom.fr (Yohann Martineau) Date: Tue, 19 Dec 2006 09:06:03 +0100 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> Message-ID: <45879D6B.1000508@nexcom.fr> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Kurt Kraut a ?crit : > Hi, > > Most current podcasts about Free Software uses Skype to keep a > conversation between different hosts/interviewers in different > locations. But sounds not correct to me to talk about Free Software > using a proprietary plataform. > > So, anyone could give me any hint or recipe to me telling how I could > record Ekiga conversations ? I'm currently using an Ubuntu system. > > Thanks in advance, > > > > Kurt Kraut > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > Hello Kurt, I think you can use wireshark, the network analyzer to record your conversations. It is probably not the most user-friendly way to do it. But it should do the job if you use G711 A-law or G711 U-law codec. You use Statistics > RTP > Show All Streams, you select the corresponding stream. And then, Save as, and you can choose .au format for your file. Regards, yohann -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFh51rxmS+8VWoXdURAn/SAJ0fqY/LHsZmVUfAkjknORoZpg+DrwCgmdet k5W1eTLJ37Kn5Yy5GD6ZrCQ= =d6WJ -----END PGP SIGNATURE----- From michel.memeteau at gmail.com Tue Dec 19 08:25:28 2006 From: michel.memeteau at gmail.com (michel memeteau) Date: Tue, 19 Dec 2006 09:25:28 +0100 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <45879D6B.1000508@nexcom.fr> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> <45879D6B.1000508@nexcom.fr> Message-ID: I woud say even if Gizmo if not free software , since few months , you can use your own SIP account as a second one, and then record a conversation. Gizmo kinda respects standard, so why not .. , and as long as there is no free software , I guess it might be the easiest way , till some of us code it .. :-) Maybe the openwengo project are working on it ? On 12/19/06, Yohann Martineau wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Kurt Kraut a ?crit : > > Hi, > > > > Most current podcasts about Free Software uses Skype to keep a > > conversation between different hosts/interviewers in different > > locations. But sounds not correct to me to talk about Free Software > > using a proprietary plataform. > > > > So, anyone could give me any hint or recipe to me telling how I could > > record Ekiga conversations ? I'm currently using an Ubuntu system. > > > > Thanks in advance, > > > > > > > > Kurt Kraut > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > > > > > Hello Kurt, > > I think you can use wireshark, the network analyzer to record your > conversations. It is probably not the most user-friendly way to do it. > But it should do the job if you use G711 A-law or G711 U-law codec. > > You use Statistics > RTP > Show All Streams, you select the > corresponding stream. And then, Save as, and you can choose .au format > for your file. > > Regards, > > yohann > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.5 (MingW32) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFFh51rxmS+8VWoXdURAn/SAJ0fqY/LHsZmVUfAkjknORoZpg+DrwCgmdet > k5W1eTLJ37Kn5Yy5GD6ZrCQ= > =d6WJ > -----END PGP SIGNATURE----- > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- %<------------------------------------------------------->% Michel memeteau VOIP: sip:17476005010 at proxy01.sipphone.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Dec 19 09:21:55 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 19 Dec 2006 10:21:55 +0100 Subject: [Ekiga-list] webcam "no space left on device" error In-Reply-To: <87psagex50.fsf@patagonia.sebmags.homelinux.org> References: <87psagex50.fsf@patagonia.sebmags.homelinux.org> Message-ID: <1166520115.3557.8.camel@golgoth01> Hi, I think you should contact the author of the driver, he is the best person to help you on that problem. We are not kernel experts, and to be honest I have no idea what that problem can be... Le lundi 18 d?cembre 2006 ? 15:01 -0600, Seb a ?crit : > Hi (apologies if this has been read in the debian amd64 ng, where this was > first posted, but without any followups), > > Details on my webcam and where I have it attached are: > > > ,-----[ lsusb ] > | Bus 002 Device 001: ID 0000:0000 > | Bus 001 Device 005: ID 0461:4d16 Primax Electronics, Ltd > | Bus 001 Device 003: ID 045e:00db Microsoft Corp. > | Bus 001 Device 004: ID 058f:9360 Alcor Micro Corp. > | Bus 001 Device 006: ID 0c45:6029 Microdia Triplex i-mini PC Camera > | Bus 001 Device 002: ID 04e8:324c Samsung Electronics Co., Ltd ML-1740 Printer > | Bus 001 Device 001: ID 0000:0000 > `----- > > > Standard video conference software, e.g. kopete, ekiga, cannot communicate > with this webcam and show a "no device found" message (ekiga), but no > other useful error messages. I was able to get something with the program > sn-webcam (http://sourceforge.net/project/showfiles.php?group_id=132181), > but all I got was a "no space left on device" message. Googling for this, > it seemed it had to do with the bus device being saturated by the other > usb devices. So I tried plugging the webcam to one of the ports in the > front panel of my desktop or the back, without success -- I think Bus 001 > above is the back one, while Bus 002 is the front one. > > If I unplug the webcam from the bus shown above, dmesg gives some lines > with errors: > > > ,-----[ dmesg | tail ] > | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a370 (#81) state 2 > | usb 1-8: usb_submit_urb() failed, error -28 > | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a3c0 (#81) state 2 > | usb 1-8: usb_submit_urb() failed, error -28 > | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a410 (#81) state 2 > | usb 1-8: usb_submit_urb() failed, error -28 > | usb 1-8: USB disconnect, address 6 > | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a460 (#81) state 2 > | usb 1-8: Disconnecting SN9C10x PC Camera... > | usb 1-8: V4L2 device /dev/video0 deregistered > `----- > > > and reconnecting causes the system to freeze completely. This camera uses > the sn9c102 driver and it does seem to be loaded: > > > ,-----[ lsmod | grep 'sn9c' ] > | sn9c102 94732 0 > | videodev 29696 1 sn9c102 > | v4l2_common 28672 2 sn9c102,videodev > `----- > > > Is anybody having similar problems? Any pointers? Thanks in advance. > > > Cheers, > -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Tue Dec 19 09:23:16 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 19 Dec 2006 10:23:16 +0100 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> Message-ID: <1166520196.3557.10.camel@golgoth01> Le lundi 18 d?cembre 2006 ? 21:14 -0200, Kurt Kraut a ?crit : > Hi, > > Most current podcasts about Free Software uses Skype to keep a > conversation between different hosts/interviewers in different > locations. But sounds not correct to me to talk about Free Software > using a proprietary plataform. > > So, anyone could give me any hint or recipe to me telling how I could > record Ekiga conversations ? I'm currently using an Ubuntu system. > I think using Asterisk together with Ekiga is the best way to allow this. People using Skype or Gizmo are just too lazy to configure properly a free software system ;-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From michel.memeteau at gmail.com Tue Dec 19 10:01:43 2006 From: michel.memeteau at gmail.com (michel memeteau) Date: Tue, 19 Dec 2006 11:01:43 +0100 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <1166520196.3557.10.camel@golgoth01> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> <1166520196.3557.10.camel@golgoth01> Message-ID: On 12/19/06, Damien Sandras wrote: > > > People using Skype or Gizmo are just too lazy to configure properly a > free software system ;-) Agree , But comparing installing a server and a client software isn't fair :-) For Wengo they talk about it last february http://dev.openwengo.com/trac/openwengo/trac.cgi/wiki/OWEP_Recording -- %<------------------------------------------------------->% Michel memeteau VOIP: sip:17476005010 at proxy01.sipphone.com 0491886375 0624808051 jabber/GoogleTalk : freechelmi at jabber.fr -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Tue Dec 19 10:08:28 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 19 Dec 2006 11:08:28 +0100 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> <1166520196.3557.10.camel@golgoth01> Message-ID: <1166522908.3557.15.camel@golgoth01> Le mardi 19 d?cembre 2006 ? 11:01 +0100, michel memeteau a ?crit : > On 12/19/06, Damien Sandras wrote: > > People using Skype or Gizmo are just too lazy to configure > properly a > free software system ;-) > > Agree , But comparing installing a server and a client software > isn't fair :-) > > For Wengo they talk about it last february > > http://dev.openwengo.com/trac/openwengo/trac.cgi/wiki/OWEP_Recording Well, then we can advise using Wengo! -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From craigs at postincrement.com Tue Dec 19 10:27:21 2006 From: craigs at postincrement.com (Craig Southeren) Date: Tue, 19 Dec 2006 21:27:21 +1100 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <1166520196.3557.10.camel@golgoth01> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> <1166520196.3557.10.camel@golgoth01> Message-ID: <20061219212559.5CBB.CRAIGS@postincrement.com> On Tue, 19 Dec 2006 10:23:16 +0100 Damien Sandras wrote: ..deleted > > So, anyone could give me any hint or recipe to me telling how I could > > record Ekiga conversations ? I'm currently using an Ubuntu system. > > > > I think using Asterisk together with Ekiga is the best way to allow > this. That's a complicated solution to a rather simple problem. Adding call recording to OPAL should be quite simple. Let's see what Santa brings Ekiga for Christmas :) Craig ----------------------------------------------------------------------- Craig Southeren Post Increment ? VoIP Consulting and Software craigs at postincrement.com.au www.postincrement.com.au Phone: +61 243654666 ICQ: #86852844 Fax: +61 243656905 MSN: craig_southeren at hotmail.com Mobile: +61 417231046 Jabber: craigs at jabber.org "It takes a man to suffer ignorance and smile. Be yourself, no matter what they say." Sting From carles at pina.cat Tue Dec 19 12:27:28 2006 From: carles at pina.cat (Carles Pina i Estany) Date: Tue, 19 Dec 2006 13:27:28 +0100 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <20061219212559.5CBB.CRAIGS@postincrement.com> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> <1166520196.3557.10.camel@golgoth01> <20061219212559.5CBB.CRAIGS@postincrement.com> Message-ID: <20061219122728.GA27732@pinux.info> Hi, On Dec/19/2006, Craig Southeren wrote: > On Tue, 19 Dec 2006 10:23:16 +0100 > Damien Sandras wrote: > > ..deleted > > > > So, anyone could give me any hint or recipe to me telling how I could > > > record Ekiga conversations ? I'm currently using an Ubuntu system. > > > > > > > I think using Asterisk together with Ekiga is the best way to allow > > this. > > That's a complicated solution to a rather simple problem. easier way: using Alsa. Read the thread: http://tech.groups.yahoo.com/group/twinklephone/message/790 It is for Twinkle but it should be possible to do the same using Ekiga. Is so easy. Also read: http://tech.groups.yahoo.com/group/twinklephone/message/792 to join the channels, etc. -- Carles Pina i Estany GPG id: 0x8CBDAE64 http://pinux.info From simon at mungewell.org Tue Dec 19 16:19:12 2006 From: simon at mungewell.org (Simon Wood) Date: Tue, 19 Dec 2006 09:19:12 -0700 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> Message-ID: <20061219091912.be0a3372.simon@mungewell.org> Just to add more applications to the list, which are a little easy than ethereal/wireshark Vomit Voipong I've seen a system which is aimed more a call centre operation, but I can't find the link... :-( There's also a script here for recording skype which may be able to be adjusted, which uses some Alsa magic - warning that it automatically overwrites previous recordings. http://blog.andrlik.org/2006/02/17/howto-record-skype-conversations-in-linux/ Of course if 'Santa' can bring us one button recording that would be great :-) Simon From dsandras at seconix.com Tue Dec 19 19:27:40 2006 From: dsandras at seconix.com (Damien Sandras) Date: Tue, 19 Dec 2006 20:27:40 +0100 Subject: [Ekiga-list] Perturbations Message-ID: <1166556460.3611.11.camel@golgoth01> Hello, I am moving the data from my server located at OVH to the new server located @ neuftelecom.fr (easyneuf.fr). More information later about this (already a big thank you to the guys at easyneuf.fr and to Luc!), however, I want to inform you that all services could be affected by the migration this week. Sorry for the inconvenience, -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ph.l at libertysurf.fr Tue Dec 19 21:38:58 2006 From: ph.l at libertysurf.fr (Philippe Lefevre) Date: Tue, 19 Dec 2006 22:38:58 +0100 Subject: [Ekiga-list] My ToUcam PRO II is broken ! Message-ID: <45885BF2.2000206@libertysurf.fr> Hi all, This message is not directly related to Ekiga but my camera falls down from my terminal some weeks ago and I had to open it in order to unlock the lens tuning. When I did that, the different optical parts felt too and I don't know how to replace it. I wrote to the Philips customer service but I didn't get any answer till now. So the only solution I can see now is to ask if somebody, having the same camera, know how her/his own camera lens assembly is. In advance, I apologize to use this channel for this subject but I'm afraid it's the only place were I could reach some potential ToUcam users. The camera model is ToUcam PRO II ref PCVC 840K/00 If ever you have to disassemble the optical equipment, this is not difficult: just unscrew the front part but anyway take care about lens which are just behind as they are very free. (may be this is due to the shock when mine falls down ? I don't know) Thank you for any info Please, contact me directly instead of using the list. PhiL From ubuntu at kurtkraut.net Tue Dec 19 21:01:06 2006 From: ubuntu at kurtkraut.net (Kurt Kraut) Date: Tue, 19 Dec 2006 19:01:06 -0200 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <20061219091912.be0a3372.simon@mungewell.org> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> <20061219091912.be0a3372.simon@mungewell.org> Message-ID: <26c783fe0612191301m36a8fd9bm2b0cacdd3b9454ee@mail.gmail.com> Aloha, Thanks for all suggestions. But it seems to me that all options envolves som much hacking that this must be added as a feature. Even regular cellphones are able to record conversation. why a softphone with a big hard disk shouldn't record ? I will try each way of recording later but considering the complexity of the proceedings, I'm not expecting any kind of success :( Thanks for the quick replies, Kurt Kraut On 12/19/06, Simon Wood wrote: > Just to add more applications to the list, which are a little easy than ethereal/wireshark > Vomit > Voipong > > I've seen a system which is aimed more a call centre operation, but I can't find the link... :-( > > There's also a script here for recording skype which may be able to be > adjusted, which uses some Alsa magic - warning that it automatically overwrites previous recordings. > > http://blog.andrlik.org/2006/02/17/howto-record-skype-conversations-in-linux/ > > Of course if 'Santa' can bring us one button recording that would be great :-) > Simon > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From carles at pina.cat Tue Dec 19 21:13:13 2006 From: carles at pina.cat (Carles Pina i Estany) Date: Tue, 19 Dec 2006 23:13:13 +0200 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <26c783fe0612191301m36a8fd9bm2b0cacdd3b9454ee@mail.gmail.com> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> <20061219091912.be0a3372.simon@mungewell.org> <26c783fe0612191301m36a8fd9bm2b0cacdd3b9454ee@mail.gmail.com> Message-ID: <20061219211313.GA11118@pinux.info> Hi, On Dec/19/2006, Kurt Kraut wrote: > Thanks for all suggestions. But it seems to me that all options > envolves som much hacking that this must be added as a feature. Even I haven't tried, but maybe Alsa option is easy. I don't remember if, to use tee thing is needed to install something (I don't think so). It looks esoteric, but maybe works and is easy to test (sorry, I am not using any softphone now...) -- Carles Pina i Estany GPG id: 0x8CBDAE64 http://pinux.info Manresa - Barcelona From jtd at mtnl.net.in Wed Dec 20 05:38:47 2006 From: jtd at mtnl.net.in (jtd) Date: Wed, 20 Dec 2006 11:08:47 +0530 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <26c783fe0612191301m36a8fd9bm2b0cacdd3b9454ee@mail.gmail.com> References: <26c783fe0612181514q618ef2a7v687038c824fb32a8@mail.gmail.com> <20061219091912.be0a3372.simon@mungewell.org> <26c783fe0612191301m36a8fd9bm2b0cacdd3b9454ee@mail.gmail.com> Message-ID: <200612201108.48049.jtd@sparc.net> On Wednesday 20 December 2006 02:31, Kurt Kraut wrote: rd disk shouldn't record ? > > I will try each way of recording later but considering the > complexity of the proceedings, I'm not expecting any kind of > success :( simple method ive been using for some time now. Add an el cheapo sound card and make neccessary connections. Very simple and flexible. afair a minor change was made to gnomemeeting to start recording on connect. -- Rgds JTD From prakashb at tataelxsi.co.in Wed Dec 20 08:44:31 2006 From: prakashb at tataelxsi.co.in (Prakash B) Date: Wed, 20 Dec 2006 14:14:31 +0530 (IST) Subject: [Ekiga-list] Is possible to run Ekiga from command line Message-ID: <20061220141431.CDN23838@mail.tataelxsi.co.in> I want to get Ekiga without the GUI. Can i operate ekiga from the command line without the help of the GUI? (i.e) I need ekiga only for audio conferencing not any other applications. Is it possible ? help me pls. Thanks in advance. - prakash From dsandras at seconix.com Wed Dec 20 13:09:47 2006 From: dsandras at seconix.com (Damien Sandras) Date: Wed, 20 Dec 2006 14:09:47 +0100 Subject: [Ekiga-list] Is possible to run Ekiga from command line In-Reply-To: <20061220141431.CDN23838@mail.tataelxsi.co.in> References: <20061220141431.CDN23838@mail.tataelxsi.co.in> Message-ID: <1166620187.8075.8.camel@golgoth01> Le mercredi 20 d?cembre 2006 ? 14:14 +0530, Prakash B a ?crit : > I want to get Ekiga without the GUI. Can i operate ekiga from the command line without the help of the GUI? (i.e) I need ekiga only for audio conferencing not any other applications. > > Is it possible ? > Sure, you can even control it through DBUS. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From prakashb at tataelxsi.co.in Wed Dec 20 15:06:05 2006 From: prakashb at tataelxsi.co.in (Prakash B) Date: Wed, 20 Dec 2006 20:36:05 +0530 Subject: [Ekiga-list] Is possible to run Ekiga from command line In-Reply-To: <1166620187.8075.8.camel@golgoth01> Message-ID: <000201c72448$5f9fc560$54a9c5cb@telxsi.com> Thanks for reply. Can u please give me some information about the procedure to follow to run ekiga without the use of GUI. ThankYou - Prakash -----Original Message----- From: ekiga-list-bounces at gnome.org [mailto:ekiga-list-bounces at gnome.org]On Behalf Of Damien Sandras Sent: Wednesday, December 20, 2006 6:40 PM To: Ekiga mailing list Subject: Re: [Ekiga-list] Is possible to run Ekiga from command line Le mercredi 20 d?cembre 2006 ? 14:14 +0530, Prakash B a ?crit : > I want to get Ekiga without the GUI. Can i operate ekiga from the command line without the help of the GUI? (i.e) I need ekiga only for audio conferencing not any other applications. > > Is it possible ? > Sure, you can even control it through DBUS. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net _______________________________________________ ekiga-list mailing list ekiga-list at gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list From fabrice at alphonso.dyndns.org Wed Dec 20 16:30:35 2006 From: fabrice at alphonso.dyndns.org (ALPHONSO Fabrice) Date: Wed, 20 Dec 2006 17:30:35 +0100 (CET) Subject: [Ekiga-list] Is possible to run Ekiga from command line In-Reply-To: <000201c72448$5f9fc560$54a9c5cb@telxsi.com> References: <000201c72448$5f9fc560$54a9c5cb@telxsi.com> Message-ID: <49271.83.206.226.2.1166632235.squirrel@alphonso.dyndns.org> On Wed, December 20, 2006 4:06 pm, Prakash B wrote: > Thanks for reply. > > Can u please give me some information about the procedure to follow to > run > ekiga without the use of GUI. As far as I remember, for a command line point of view, a 'ekiga -c ' should start the call. But I guess that you will still need an X environment as ekiga is a graphic app, and I think cannot be run without a graphical display. About the DBUS control of the app, I don't know. > > ThankYou > - Prakash > Hope that helps, Fabrice > > > -----Original Message----- > From: ekiga-list-bounces at gnome.org > [mailto:ekiga-list-bounces at gnome.org]On Behalf Of Damien Sandras > Sent: Wednesday, December 20, 2006 6:40 PM > To: Ekiga mailing list > Subject: Re: [Ekiga-list] Is possible to run Ekiga from command line > > > Le mercredi 20 d?cembre 2006 ? 14:14 +0530, Prakash B a ?crit : >> I want to get Ekiga without the GUI. Can i operate ekiga from the >> command > line without the help of the GUI? (i.e) I need ekiga only for audio > conferencing not any other applications. >> >> Is it possible ? >> > > Sure, you can even control it through DBUS. > > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From mariofutire at googlemail.com Wed Dec 20 16:58:05 2006 From: mariofutire at googlemail.com (Mario Rossi) Date: Wed, 20 Dec 2006 16:58:05 +0000 Subject: [Ekiga-list] How can I record an Ekiga conversation ? Message-ID: <53d94280612200858p484bd91avfd64f32f58c09607@mail.gmail.com> >easier way: using Alsa. Read the thread: >http://tech.groups.yahoo.com/group/twinklephone/message/790 Since Ekiga does not let the user choose the device, I've managed to create a .asoundrc for this purpose (I'm not sure about the difference between "file" and "tee") pcm.input_raw { type file slave.pcm "hw:0,0" file "/tmp/input.raw" } pcm.output_raw { type file slave.pcm "hw:0,0" file "/tmp/output.raw" } pcm.playback { type plug slave { pcm "output_raw" # format S16_LE # channels 2 # rate 48000 } } pcm.capture { type plug slave { pcm "input_raw" # format S16_LE # channels 2 # rate 48000 } } pcm.!default { type asym playback.pcm "playback" capture.pcm "capture" } Then, choosing DEFAULT everything is recorded. To play those files aplay -f S16_LE -r8000 -c 2 XXXX.raw It would be good to force a format, so that one has not to guess what has been used (I imagine it depends on the codec used). But it does not work for Ekiga. From carles at pina.cat Wed Dec 20 17:21:52 2006 From: carles at pina.cat (Carles Pina i Estany) Date: Wed, 20 Dec 2006 19:21:52 +0200 Subject: [Ekiga-list] How can I record an Ekiga conversation ? In-Reply-To: <53d94280612200858p484bd91avfd64f32f58c09607@mail.gmail.com> References: <53d94280612200858p484bd91avfd64f32f58c09607@mail.gmail.com> Message-ID: <20061220172152.GD6802@pinux.info> Hi, On Dec/20/2006, Mario Rossi wrote: > >easier way: using Alsa. Read the thread: > >http://tech.groups.yahoo.com/group/twinklephone/message/790 > > Since Ekiga does not let the user choose the device, I've managed to > create a .asoundrc for this purpose (I'm not sure about the difference > between "file" and "tee") (I have no idea) Maybe file sends the sound only to file without reproduce or capture it. And tee sends to file and reproduce/capture it. Like tee command in bash... > Then, choosing DEFAULT everything is recorded. > To play those files > > aplay -f S16_LE -r8000 -c 2 XXXX.raw > > It would be good to force a format, so that one has not to guess what > has been used (I imagine it depends on the codec used). But it does > not work for Ekiga. file XXXX.raw should do the trick... You say that doesn't work with Ekiga? and other bi-directional applications? using alsa? maybe somebody can help it more. Not me: I haven't done it... -- Carles Pina i Estany GPG id: 0x8CBDAE64 http://pinux.info Manresa - Barcelona From mariofutire at googlemail.com Wed Dec 20 17:25:20 2006 From: mariofutire at googlemail.com (Mario Rossi) Date: Wed, 20 Dec 2006 17:25:20 +0000 Subject: [Ekiga-list] How can I record an Ekiga conversation ? Message-ID: <53d94280612200925p16d6f495s578bced896fad2c2@mail.gmail.com> >> not work for Ekiga. >file XXXX.raw should do the trick... >You say that doesn't work with Ekiga? and other bi-directional >applications? using alsa? maybe somebody can help it more. Not me: I >haven't done it... Sorry, I meant, the format does not work properly in ekiga. I have to take the default. If I remove the comment sign from pcm.playback { type plug slave { pcm "output_raw" # format S16_LE # channels 2 # rate 48000 } } then Ekiga prints a lot of ALSA warnings, while other applications (aplay and kaffeine) generate a file in the required format. The problem is that I can play the files in ekiga via aplay -f S16_LE -r8000 -c 2 XXXX.raw but I had to try various settings until I found the right "rate" and "channels", otherwise the sound is too fast, too slow, or just bad. But other than that, it works fine. From richard.ibbotson at gmail.com Wed Dec 20 19:57:54 2006 From: richard.ibbotson at gmail.com (Richard Ibbotson) Date: Wed, 20 Dec 2006 19:57:54 +0000 Subject: [Ekiga-list] Ubuntu/Kubuntu 6.10 and Ekiga 2.0.3 bug Message-ID: <200612201958.01305.richard.ibbotson@gmail.com> Hi I'm trying to work out why Ekiga won't work on my Kubuntu/Ubuntu desktop. After using the configuration druid I find that sound works fine from my USB based Logitech 4000 Pro webcam. The druid detects everything and the video window opens in Ekiga and tries to show a picture. However, what I can see is just a mid-gray colour and nothing else. No picutres. Nothing there. I have tried Xawtv and that says ... $ xawtv This is xawtv-3.95, running on Linux/i686 (2.6.17-10-386) Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct Warning: Unable to load any usable ISO8859 font Warning: Unable to load any usable ISO8859 font Error: Aborting: no font found So, that's no help either. Can anyone suggest what to do next to troubleshoot the problem ? -- Richard www.sheflug.org.uk From fabrice at alphonso.dyndns.org Wed Dec 20 20:14:20 2006 From: fabrice at alphonso.dyndns.org (Fabrice ALPHONSO) Date: Wed, 20 Dec 2006 21:14:20 +0100 Subject: [Ekiga-list] Ubuntu/Kubuntu 6.10 and Ekiga 2.0.3 bug In-Reply-To: <200612201958.01305.richard.ibbotson@gmail.com> References: <200612201958.01305.richard.ibbotson@gmail.com> Message-ID: <1166645662.6009.2.camel@balder.walhalla> On mer, 2006-12-20 at 19:57 +0000, Richard Ibbotson wrote: > Hi > > I'm trying to work out why Ekiga won't work on my Kubuntu/Ubuntu > desktop. After using the configuration druid I find that sound works > fine from my USB based Logitech 4000 Pro webcam. The druid detects > everything and the video window opens in Ekiga and tries to show a > picture. However, what I can see is just a mid-gray colour and > nothing else. No picutres. Nothing there. I have tried Xawtv and > that says ... If i remember correctly i think there is problem with the pwc kernel module provided with ubuntu (and perhaps some other distributions). A solution is to recompile the pwc module from source. This was suggested in a mail to this mailing-list in October : http://mail.gnome.org/archives/ekiga-list/2006-October/msg00075.html Hope that helps > > $ xawtv > This is xawtv-3.95, running on Linux/i686 (2.6.17-10-386) > Warning: Cannot convert > string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct > Warning: Unable to load any usable ISO8859 font > Warning: Unable to load any usable ISO8859 font > Error: Aborting: no font found > > So, that's no help either. Can anyone suggest what to do next to > troubleshoot the problem ? > > Fabrice -- Fabrice ALPHONSO From sevmek at free.fr Wed Dec 20 20:39:00 2006 From: sevmek at free.fr (yannick) Date: Wed, 20 Dec 2006 21:39:00 +0100 Subject: [Ekiga-list] Ubuntu/Kubuntu 6.10 and Ekiga 2.0.3 bug In-Reply-To: <200612201958.01305.richard.ibbotson@gmail.com> References: <200612201958.01305.richard.ibbotson@gmail.com> Message-ID: <1166647140.8056.0.camel@achille> Le mercredi 20 d?cembre 2006 ? 19:57 +0000, Richard Ibbotson a ?crit : > Hi > > I'm trying to work out why Ekiga won't work on my Kubuntu/Ubuntu > desktop. After using the configuration druid I find that sound works > fine from my USB based Logitech 4000 Pro webcam. The druid detects > everything and the video window opens in Ekiga and tries to show a > picture. However, what I can see is just a mid-gray colour and > nothing else. No picutres. Nothing there. I have tried Xawtv and > that says ... > https://help.ubuntu.com/community/Ekiga#head-8362944fd3a8d7f4fc4c60d31579a7bafdd6dfdc Regards, Yannick > $ xawtv > This is xawtv-3.95, running on Linux/i686 (2.6.17-10-386) > Warning: Cannot convert > string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct > Warning: Unable to load any usable ISO8859 font > Warning: Unable to load any usable ISO8859 font > Error: Aborting: no font found > > So, that's no help either. Can anyone suggest what to do next to > troubleshoot the problem ? > > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From richard.ibbotson at gmail.com Wed Dec 20 20:57:12 2006 From: richard.ibbotson at gmail.com (Richard Ibbotson) Date: Wed, 20 Dec 2006 20:57:12 +0000 Subject: [Ekiga-list] Ubuntu/Kubuntu 6.10 and Ekiga 2.0.3 bug In-Reply-To: <1166647140.8056.0.camel@achille> References: <200612201958.01305.richard.ibbotson@gmail.com> <1166647140.8056.0.camel@achille> Message-ID: <200612202057.15852.richard.ibbotson@gmail.com> Yannick > https://help.ubuntu.com/community/Ekiga#head-8362944fd3a8d7f4fc4c60 >d31579a7bafdd6dfdc Oh right... I'll have a go.. Thanks very much :) -- Richard From jh+ekiga at daria.co.uk Wed Dec 20 22:30:07 2006 From: jh+ekiga at daria.co.uk (Jonathan Hudson) Date: Wed, 20 Dec 2006 22:30:07 +0000 Subject: [Ekiga-list] Testing snapshots with 'old' configuration Message-ID: <20061220223007.7f115eab@eeyore.daria.co.uk> Hi, I'd like to be able to use my existing ekiga configuration with the snapshots, but when I run a snapshot, I'm presented with the first-time druid and have to redo the configuration and address book. Is there any way to migrate the settings ? -jonathan From lurch at gmx.li Wed Dec 20 23:14:28 2006 From: lurch at gmx.li (Stefan Bruens) Date: Thu, 21 Dec 2006 00:14:28 +0100 Subject: [Ekiga-list] Ubuntu/Kubuntu 6.10 and Ekiga 2.0.3 bug In-Reply-To: <1166647140.8056.0.camel@achille> References: <200612201958.01305.richard.ibbotson@gmail.com> <1166647140.8056.0.camel@achille> Message-ID: <200612210014.34521.lurch@gmx.li> Am Mittwoch, 20. Dezember 2006 21:39 schrieb yannick: > Le mercredi 20 d?cembre 2006 ? 19:57 +0000, Richard Ibbotson a ?crit : > > Hi > > > > I'm trying to work out why Ekiga won't work on my Kubuntu/Ubuntu > > desktop. After using the configuration druid I find that sound works > > fine from my USB based Logitech 4000 Pro webcam. The druid detects > > everything and the video window opens in Ekiga and tries to show a > > picture. However, what I can see is just a mid-gray colour and > > nothing else. No picutres. Nothing there. I have tried Xawtv and > > that says ... > > https://help.ubuntu.com/community/Ekiga#head-8362944fd3a8d7f4fc4c60d31579a7 >bafdd6dfdc if you just want to have it working, create a file named eg "video" in "/etc/modprobe.d/" and put the following line there ---- options pwc compression=0 ---- As ekiga atm only uses qcif, and qcif can be transferred uncompressed over usb, this works quite fine, and saves you a lot of trouble Just remember to rmmod and modprobe the pwc module after the change. Greetings, Lurchi -- Stefan Br?ns / Kastanienweg 6 - Zimmer 1206 / 52074 Aachen mailto:lurch at gmx.li http://www.kawo1.rwth-aachen.de/~lurchi/ phone: +49 241 169-4206 mobile: +49 160 3797725 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From sevmek at free.fr Thu Dec 21 01:23:34 2006 From: sevmek at free.fr (yannick) Date: Thu, 21 Dec 2006 02:23:34 +0100 Subject: [Ekiga-list] My ToUcam PRO II is broken ! In-Reply-To: <45885BF2.2000206@libertysurf.fr> References: <45885BF2.2000206@libertysurf.fr> Message-ID: <1166664214.8056.4.camel@achille> Le mardi 19 d?cembre 2006 ? 22:38 +0100, Philippe Lefevre a ?crit : > Hi all, > > This message is not directly related to Ekiga but my camera falls down > from my terminal some weeks ago and I had to open it in order to unlock > the lens tuning. When I did that, the different optical parts felt too > and I don't know how to replace it. I wrote to the Philips customer > service but I didn't get any answer till now. So the only solution I can > see now is to ask if somebody, having the same camera, know how her/his > own camera lens assembly is. > Well... I remember some tuto I read about turning a webcam to see at night (using UV). This kind of tutorial on internet may help... This should be at last 2 parts : the lens and an UV filter. Regards, Yannick > In advance, I apologize to use this channel for this subject but I'm > afraid it's the only place were I could reach some potential ToUcam users. > > The camera model is ToUcam PRO II ref PCVC 840K/00 > If ever you have to disassemble the optical equipment, this is not > difficult: just unscrew the front part but anyway take care about lens > which are just behind as they are very free. (may be this is due to the > shock when mine falls down ? I don't know) > > Thank you for any info > Please, contact me directly instead of using the list. > > PhiL > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From dsandras at seconix.com Thu Dec 21 08:29:43 2006 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 21 Dec 2006 09:29:43 +0100 Subject: [Ekiga-list] Testing snapshots with 'old' configuration In-Reply-To: <20061220223007.7f115eab@eeyore.daria.co.uk> References: <20061220223007.7f115eab@eeyore.daria.co.uk> Message-ID: <1166689783.3563.0.camel@golgoth01> Le mercredi 20 d?cembre 2006 ? 22:30 +0000, Jonathan Hudson a ?crit : > Hi, > > I'd like to be able to use my existing ekiga configuration with the > snapshots, but when I run a snapshot, I'm presented with the first-time > druid and have to redo the configuration and address book. > > Is there any way to migrate the settings ? > The configuration assistant is presented on each new release. However, settings are being migrated. (except if it is a separate namespace, I don't remember if it is the case or not with all snaps). -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Thu Dec 21 21:30:46 2006 From: dsandras at seconix.com (Damien Sandras) Date: Thu, 21 Dec 2006 22:30:46 +0100 Subject: [Ekiga-list] Test Message-ID: <1166736646.5055.0.camel@golgoth01> Hi, This is a test, please ignore and sorry for the noise. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From alan.ezust at gmail.com Fri Dec 22 00:19:41 2006 From: alan.ezust at gmail.com (Alan Ezust) Date: Thu, 21 Dec 2006 16:19:41 -0800 Subject: [Ekiga-list] hyperlinks from pc-to-phone settings dialog do nothing in KDE Message-ID: Hi - i'm using kanotix / kde / gnomemeeting, and I tried to click on the links from the pc-to-phone dialog but they don't work. I could not right-click and copy the URL either. How to configure what browser it uses from KDE? Could someone please send me the URLs that are there so I can register manually instead of from inside the gnomemeeting app? Why aren't there links from the gnomemeeting website? From lurch at gmx.li Fri Dec 22 00:43:25 2006 From: lurch at gmx.li (Stefan Bruens) Date: Fri, 22 Dec 2006 01:43:25 +0100 Subject: [Ekiga-list] =?iso-8859-1?q?hyperlinks_from_pc-to-phone_settings_?= =?iso-8859-1?q?dialog_do_nothing=09in_KDE?= In-Reply-To: References: Message-ID: <200612220143.35140.lurch@gmx.li> Am Freitag, 22. Dezember 2006 01:19 schrieb Alan Ezust: > Hi - i'm using kanotix / kde / gnomemeeting, and I tried to click on > the links from > the pc-to-phone dialog but they don't work. I could not right-click > and copy the URL either. How to configure what browser it uses from > KDE? This question has been asked and answered on the 13.08.2006 already. Greetings, Stefan -- Stefan Br?ns / Kastanienweg 6 - Zimmer 1206 / 52074 Aachen mailto:lurch at gmx.li http://www.kawo1.rwth-aachen.de/~lurchi/ phone: +49 241 169-4206 mobile: +49 160 3797725 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: From gh at gregor-horvath.com Fri Dec 22 06:51:44 2006 From: gh at gregor-horvath.com (Gregor Horvath) Date: Fri, 22 Dec 2006 07:51:44 +0100 Subject: [Ekiga-list] Sipcall and Ekiga Message-ID: <458B8080.9070803@gregor-horvath.com> Hi, I have an account at Sipcall.at and it works with sjphone but not with Ekiga. It does connect, but a call to a normal telephone fails with an authentifaction error. I have exactly the same issues as found in this thread: http://www.mail-archive.com/gnomemeeting-list at gnome.org/msg03567.html Any news on this? If needed I can send the debug output. -- Gregor From alan.ezust at gmail.com Fri Dec 22 19:55:37 2006 From: alan.ezust at gmail.com (Alan Ezust) Date: Fri, 22 Dec 2006 11:55:37 -0800 Subject: [Ekiga-list] invalid gatekeeper settings cause gnomemeeting to crash Message-ID: Problems with GnomeMeeting 1.2.3 (debian kanotix unstable) I put a particular setting into the "gatekeeper settings", and as soon as I hit apply, gnomemeeting crashed. "quit unexpectedly" - quit or restart? ad infinitum. No way to get back into the preferences to clear that. What is the configuration file that it saves gatekeeper settings to? I'd like to do a "clean setup" again, but I don't know what file to delete. Tried building gnomemeeting from source. using a debian system. apt-get build-dep gnomemeeting installed a bunch of -dev libraries, but after that, I run configure and it still tells me I'm missing dependencies: checking for PWLib version... configure: error: Sorry but the recommended PWLib version is 1.8.7 I have libpt version 1.10. I checked http://www.ekiga.org/index.php?rub=5&path=debian/sid-i386 but couldn't find libPW version 1.8.7. Is there a mistake in the config script? From jpuydt at free.fr Fri Dec 22 20:18:47 2006 From: jpuydt at free.fr (Julien Puydt) Date: Fri, 22 Dec 2006 21:18:47 +0100 Subject: [Ekiga-list] invalid gatekeeper settings cause gnomemeeting to crash In-Reply-To: References: Message-ID: <458C3DA7.4040300@free.fr> Alan Ezust a ?crit : > Problems with GnomeMeeting 1.2.3 (debian kanotix unstable) Upgrade. Snark From seandarcy2 at gmail.com Fri Dec 22 23:42:27 2006 From: seandarcy2 at gmail.com (sean) Date: Fri, 22 Dec 2006 18:42:27 -0500 Subject: [Ekiga-list] Ekiga <> Netmeeting In-Reply-To: <200606040114.03906.conrad_videokonferenz@gmx.de> References: <1149314920.4349.3.camel@george-wp2elrkq> <200606040114.03906.conrad_videokonferenz@gmx.de> Message-ID: Conrad wrote: > Am Samstag, 3. Juni 2006 08:08 schrieb George Boyd: >> I read somewhere that there was a "minor" change to get Ekiga and >> netmeeting to talk with each other. But somewhere along the way I missed >> what that change is. >> >> Could someone enlighten me please? > You probably mean the Netmeeting GSM codec? Otherwise you would use 64kbit/s > for voice (as Ekiga lacks patented voice codecs such as G723 Microsoft is so > fond to) Get it from the Gnomemeeting/Ekiga page and install it. You'll then > be able to use the GSM codec (while sound quality is nuts) > > Greetings > Conrad I looked at the gnomemeeting.org and ekiga.org sites ( they seem copies). I don't see any downloads other than pwlib, opal and ekiga. ??? sean From law_ence.dev at ntlworld.com Fri Dec 22 23:43:31 2006 From: law_ence.dev at ntlworld.com (ael) Date: Fri, 22 Dec 2006 23:43:31 +0000 Subject: [Ekiga-list] Suggestion: a front end hook for ekiga Message-ID: <458C6DA3.6010808@ntlworld.com> My sound card is rather complex as viewed by ALSA. To use ekiga, I need to launch alsamixer or one of its variants and set at least 4 different controls which are not very memorable. Instead I have used alsactl to store the configuration in a special "ekiga-alsa.cfg" file. Then I can use alsactl -f /path/ekiga-alsa.cfg restore ; ekiga & In fact, I just wrap that up as a tiny little bash script called ekiga_go. I would probably forget that path = /usr/local/etc/ otherwise :-) This is probably re-inventing the wheel, but should ekiga have a facility to run a custom sound set-up script at start up? Or have I missed the documentation? A E Lawrence From dsandras at seconix.com Sat Dec 23 10:34:17 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 23 Dec 2006 11:34:17 +0100 Subject: [Ekiga-list] Suggestion: a front end hook for ekiga In-Reply-To: <458C6DA3.6010808@ntlworld.com> References: <458C6DA3.6010808@ntlworld.com> Message-ID: <1166870057.3522.9.camel@golgoth01> Le vendredi 22 d?cembre 2006 ? 23:43 +0000, ael a ?crit : > My sound card is rather complex as viewed by ALSA. To use ekiga, I need > to launch alsamixer or one of its variants and set at least 4 different > controls which are not very memorable. > > Instead I have used alsactl to store the configuration in a special > "ekiga-alsa.cfg" file. Then I can use > alsactl -f /path/ekiga-alsa.cfg restore ; ekiga & > > In fact, I just wrap that up as a tiny little bash script called > ekiga_go. I would probably forget that path = /usr/local/etc/ otherwise :-) > > This is probably re-inventing the wheel, but should ekiga have a > facility to run a custom sound set-up script at start up? Or have I > missed the documentation? The real question is : why do you have to do that? Mixer settings should be remembered accross reboots, and should not be changed while you are logged. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sat Dec 23 10:34:39 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 23 Dec 2006 11:34:39 +0100 Subject: [Ekiga-list] Sipcall and Ekiga In-Reply-To: <458B8080.9070803@gregor-horvath.com> References: <458B8080.9070803@gregor-horvath.com> Message-ID: <1166870079.3522.11.camel@golgoth01> Le vendredi 22 d?cembre 2006 ? 07:51 +0100, Gregor Horvath a ?crit : > Hi, > > I have an account at Sipcall.at and it works with sjphone but not with > Ekiga. It does connect, but a call to a normal telephone fails with an > authentifaction error. > > I have exactly the same issues as found in this thread: > > http://www.mail-archive.com/gnomemeeting-list at gnome.org/msg03567.html > > Any news on this? > > If needed I can send the debug output. Please post a -d 4 output somewhere. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From gh at gregor-horvath.com Sat Dec 23 11:44:55 2006 From: gh at gregor-horvath.com (Gregor Horvath) Date: Sat, 23 Dec 2006 12:44:55 +0100 Subject: [Ekiga-list] Sipcall and Ekiga In-Reply-To: <1166870079.3522.11.camel@golgoth01> References: <458B8080.9070803@gregor-horvath.com> <1166870079.3522.11.camel@golgoth01> Message-ID: <458D16B7.70903@gregor-horvath.com> Damien Sandras schrieb: > > Please post a -d 4 output somewhere. http://gregor-horvath.com/output.txt.bz2 Thanks for your help -- Gregor From dsandras at seconix.com Sat Dec 23 13:05:56 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 23 Dec 2006 14:05:56 +0100 Subject: [Ekiga-list] Sipcall and Ekiga In-Reply-To: <458D16B7.70903@gregor-horvath.com> References: <458B8080.9070803@gregor-horvath.com> <1166870079.3522.11.camel@golgoth01> <458D16B7.70903@gregor-horvath.com> Message-ID: <1166879156.3522.15.camel@golgoth01> Their realm is first advertised as : voipgateway.org then as : 212.117.200.148 Which explains the problem. Can you try setting 212.117.200.148 as realm when registering? Le samedi 23 d?cembre 2006 ? 12:44 +0100, Gregor Horvath a ?crit : > Damien Sandras schrieb: > > > > > Please post a -d 4 output somewhere. > > > http://gregor-horvath.com/output.txt.bz2 > > > Thanks for your help > > -- > Gregor > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Damien Sandras From law_ence.dev at ntlworld.com Sat Dec 23 16:16:14 2006 From: law_ence.dev at ntlworld.com (ael) Date: Sat, 23 Dec 2006 16:16:14 +0000 Subject: [Ekiga-list] Suggestion: a front end hook for ekiga In-Reply-To: <1166870057.3522.9.camel@golgoth01> References: <458C6DA3.6010808@ntlworld.com> <1166870057.3522.9.camel@golgoth01> Message-ID: <458D564E.7080005@ntlworld.com> Damien Sandras wrote: > Le vendredi 22 d?cembre 2006 ? 23:43 +0000, ael a ?crit : > >>My sound card is rather complex as viewed by ALSA. To use ekiga, I need >>to launch alsamixer or one of its variants and set at least 4 different >>controls which are not very memorable. >> >>Instead I have used alsactl to store the configuration in a special >>"ekiga-alsa.cfg" file. Then I can use >>alsactl -f /path/ekiga-alsa.cfg restore ; ekiga & >> >>In fact, I just wrap that up as a tiny little bash script called >>ekiga_go. I would probably forget that path = /usr/local/etc/ otherwise :-) >> >>This is probably re-inventing the wheel, but should ekiga have a >>facility to run a custom sound set-up script at start up? Or have I >>missed the documentation? > > > > The real question is : why do you have to do that? Mixer settings should > be remembered accross reboots, and should not be changed while you are > logged. > 1) I don't want a microphone active when I am not using it. Also possible security issues there. 2) I find that I need to adjust PCM, FM and master volume levels among others to suit various applications. Some are otherwise just too quiet, others deafen me. 3) Capture selection/setting also needs adjusting for various applications. When I install ekiga on a new machine, I often think the microphone is not working until I remember that it must be in Capture mode for ekiga. I have been caught by that several times :-) 4) If I start ekiga with my default mixer setting ekiga does not work: no microphone input, and very quiet output. So I find that I freqently need to adjust mixer settings depending on which application I am running. mplayer, realplayer [spit], aplay, timidity, aplaymidi, ekiga and so on... A E Lawrence From gh at gregor-horvath.com Sat Dec 23 16:48:03 2006 From: gh at gregor-horvath.com (Gregor Horvath) Date: Sat, 23 Dec 2006 17:48:03 +0100 Subject: [Ekiga-list] Sipcall and Ekiga In-Reply-To: <1166879156.3522.15.camel@golgoth01> References: <458B8080.9070803@gregor-horvath.com> <1166870079.3522.11.camel@golgoth01> <458D16B7.70903@gregor-horvath.com> <1166879156.3522.15.camel@golgoth01> Message-ID: <458D5DC3.4020101@gregor-horvath.com> Damien Sandras schrieb: > Their realm is first advertised as : > voipgateway.org > then as : > 212.117.200.148 > > Which explains the problem. > > Can you try setting 212.117.200.148 as realm when registering? Thank's. I have tried and there is some progress. Now the called mobile phone rings one time but then the connection is closed and ekiga says connection was terminated because of an error. Here's the log: http://gregor-horvath.com/output2.txt -- Gregor From Wolfram.Wagner at web.de Sat Dec 23 20:01:47 2006 From: Wolfram.Wagner at web.de (Wolfram Wagner) Date: Sat, 23 Dec 2006 21:01:47 +0100 Subject: [Ekiga-list] STUN registration In-Reply-To: References: Message-ID: <200612232101.47419.Wolfram.Wagner@web.de> Hello Damien, Thanks for your reply. It took a while until I had time again. Please remember, I have problems with registration and get a 404 not found message. Last time you answered me, that I should sniff a bit. So I did. I found out, that registration at STUN server is done maybe by using a wrong IP. My current IP is 84.159.48.129. In STUN Registration I see contact binding: URI: Then my client sends SUBSCRIBE using the same wrong IP Address. Next I get a 404 Error (not found) telling me Sent-by Address: 84.159.61.31 Sent-by port: 5074 ... RPort: 5074 Received: 84.159.48.129 ... Warning: 392 192.168.70.52:5060 "Noisy feedback tells: pid=16986 req_src_ip=84.159.48.129 req_src_port=5074 in_uri=sip:wolfram.wagner at ekiga.net out_uri=sip:wolfram.wagner at ekiga.net via_cnt==1" So I wonder where this IP 84.159.61.31 comes from. I checked it and it is one of the dynamic addresses used by my provider. The check via ekiga.net/ip returnes the correct ip. After three more Register retries it gives up. Might it be possible that this wrong ip address makes problems in registration. Maybe the answer packages are sent to this machine. Thanks and Have a very nice Christmas! Wolfram Your last answer: Le vendredi 01 d?cembre 2006 ? 20:57 +0100, Wolfram Wagner a ?crit : > I have posted it to ?http://pastebin.ca/263742 > > I see a 404 Error followed by a timeout when waitung for PDU. I have not > enough insight to know what this means... > The 404 is for the SUBSCRIBE (it is a normal behavior). The timeout is for the REGISTER. That means that : - the SUBSCRIBE reaches ekiga.net - the REGISTER, which is identical, doesn't reach ekiga.net OR the reply to the REGISTER doesn't reach your internal host Can you sniff the traffic on the routers to see what happens? I have the feeling that one of them is either dropping the REGISTER, or dropping the answer to the REGISTER or simply rewriting the REGISTER in such a way that the answer never reaches you... From dsandras at seconix.com Sat Dec 23 20:40:30 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 23 Dec 2006 21:40:30 +0100 Subject: [Ekiga-list] Suggestion: a front end hook for ekiga In-Reply-To: <458D564E.7080005@ntlworld.com> References: <458C6DA3.6010808@ntlworld.com> <1166870057.3522.9.camel@golgoth01> <458D564E.7080005@ntlworld.com> Message-ID: <1166906430.6738.24.camel@golgoth01> Le samedi 23 d?cembre 2006 ? 16:16 +0000, ael a ?crit : > > > > The real question is : why do you have to do that? Mixer settings should > > be remembered accross reboots, and should not be changed while you are > > logged. > > > > 1) I don't want a microphone active when I am not using it. Also > possible security issues there. > > 2) I find that I need to adjust PCM, FM and master volume levels among > others to suit various applications. Some are otherwise just too quiet, > others deafen me. > > 3) Capture selection/setting also needs adjusting for various > applications. When I install ekiga on a new machine, I often think the > microphone is not working until I remember that it must be in Capture > mode for ekiga. I have been caught by that several times :-) > > 4) If I start ekiga with my default mixer setting ekiga does not work: > no microphone input, and very quiet output. > > So I find that I freqently need to adjust mixer settings depending on > which application I am running. mplayer, realplayer [spit], aplay, > timidity, aplaymidi, ekiga and so on... That's a good justification :-) -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sat Dec 23 20:46:13 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 23 Dec 2006 21:46:13 +0100 Subject: [Ekiga-list] Sipcall and Ekiga In-Reply-To: <458D5DC3.4020101@gregor-horvath.com> References: <458B8080.9070803@gregor-horvath.com> <1166870079.3522.11.camel@golgoth01> <458D16B7.70903@gregor-horvath.com> <1166879156.3522.15.camel@golgoth01> <458D5DC3.4020101@gregor-horvath.com> Message-ID: <1166906773.6738.26.camel@golgoth01> Le samedi 23 d?cembre 2006 ? 17:48 +0100, Gregor Horvath a ?crit : > Damien Sandras schrieb: > > Their realm is first advertised as : > > voipgateway.org > > then as : > > 212.117.200.148 > > > > Which explains the problem. > > > > Can you try setting 212.117.200.148 as realm when registering? > > Thank's. I have tried and there is some progress. Now the called mobile > phone rings one time but then the connection is closed and ekiga says > connection was terminated because of an error. > Here's the log: > > http://gregor-horvath.com/output2.txt > Can you try without video? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sat Dec 23 20:49:56 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 23 Dec 2006 21:49:56 +0100 Subject: [Ekiga-list] STUN registration In-Reply-To: <200612232101.47419.Wolfram.Wagner@web.de> References: <200612232101.47419.Wolfram.Wagner@web.de> Message-ID: <1166906996.6738.31.camel@golgoth01> Hi Wolfgram, Le samedi 23 d?cembre 2006 ? 21:01 +0100, Wolfram Wagner a ?crit : > Thanks for your reply. It took a while until I had time again. > > Please remember, I have problems with registration and get a 404 not > found message. > Last time you answered me, that I should sniff a bit. So I did. > > I found out, that registration at STUN server is done maybe by using a > wrong IP. My current IP is 84.159.48.129. > > > In STUN Registration I see contact binding: > URI: > > Then my client sends SUBSCRIBE using the same wrong IP Address. > > Next I get a 404 Error (not found) telling me > Sent-by Address: 84.159.61.31 > Sent-by port: 5074 > ... > RPort: 5074 > Received: 84.159.48.129 > ... > Warning: 392 192.168.70.52:5060 "Noisy feedback tells: pid=16986 > req_src_ip=84.159.48.129 req_src_port=5074 > in_uri=sip:wolfram.wagner at ekiga.net > out_uri=sip:wolfram.wagner at ekiga.net via_cnt==1" > > > So I wonder where this IP 84.159.61.31 comes from. I checked it and it > is one of the dynamic addresses used by my provider. The check via > ekiga.net/ip returnes the correct ip. > > After three more Register retries it gives up. > > > Might it be possible that this wrong ip address makes problems in > registration. Maybe the answer packages are sent to this machine. > Most probably. Either STUN is unable to determine the correct public IP address because of complex NAT mechanisms. Or something in between is rewriting the SIP packets. But I must admit I'm a bit lost. Try comparing the packets sent by Ekiga with those that you are able to snif, if they are different, then one of the routers is changing the packets. > Thanks and Have a very nice Christmas! > Thanks, you too!!! > Wolfram > > Your last answer: > Le vendredi 01 d?cembre 2006 ? 20:57 +0100, Wolfram Wagner a ?crit : > > > I have posted it to http://pastebin.ca/263742 > > > > I see a 404 Error followed by a timeout when waitung for PDU. I have > not > > enough insight to know what this means... > > > > The 404 is for the SUBSCRIBE (it is a normal behavior). The timeout is > for the REGISTER. > > That means that : > - the SUBSCRIBE reaches ekiga.net > - the REGISTER, which is identical, doesn't reach ekiga.net OR the reply > to the REGISTER doesn't reach your internal host > > Can you sniff the traffic on the routers to see what happens? > > I have the feeling that one of them is either dropping the REGISTER, or > dropping the answer to the REGISTER or simply rewriting the REGISTER in > such a way that the answer never reaches you... > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From ebi5 at ozob.net Sat Dec 23 20:49:19 2006 From: ebi5 at ozob.net (Gene Imes) Date: Sat, 23 Dec 2006 14:49:19 -0600 Subject: [Ekiga-list] uvc cam and green video Message-ID: <458D964F.20304@ozob.net> I have a uvc cam which is a ProScopeHR. I works with luvcview nicely however with ekiga the image is green with every other scan line missing. Is there some setting I can set to change the type of video? With luvcview I must start it like so to work: luvcview -d /dev/video0 -f yuv Thanks for any help at all, -- Gene Imes ============================= ozob.net From ebi5 at ozob.net Sat Dec 23 20:50:21 2006 From: ebi5 at ozob.net (Gene Imes) Date: Sat, 23 Dec 2006 14:50:21 -0600 Subject: [Ekiga-list] ekiga help system Message-ID: <458D968D.80609@ozob.net> I use gentoo which has an automatic installer. What must I do to get ekiga help to work? Thanks, -- Gene Imes ============================= ozob.net From law_ence.dev at ntlworld.com Sat Dec 23 21:55:47 2006 From: law_ence.dev at ntlworld.com (ael) Date: Sat, 23 Dec 2006 21:55:47 +0000 Subject: [Ekiga-list] Suggestion: a front end hook for ekiga In-Reply-To: <1166906430.6738.24.camel@golgoth01> References: <458C6DA3.6010808@ntlworld.com> <1166870057.3522.9.camel@golgoth01> <458D564E.7080005@ntlworld.com> <1166906430.6738.24.camel@golgoth01> Message-ID: <458DA5E3.5040508@ntlworld.com> Damien Sandras wrote: > Le samedi 23 d?cembre 2006 ? 16:16 +0000, ael a ?crit : > >>>The real question is : why do you have to do that? Mixer settings should >>>be remembered accross reboots, and should not be changed while you are >>>logged. >>> >> >>1) I don't want a microphone active when I am not using it. Also >>possible security issues there. >> >>2) I find that I need to adjust PCM, FM and master volume levels among >>others to suit various applications. Some are otherwise just too quiet, >>others deafen me. >> >>3) Capture selection/setting also needs adjusting for various >>applications. When I install ekiga on a new machine, I often think the >>microphone is not working until I remember that it must be in Capture >>mode for ekiga. I have been caught by that several times :-) >> >>4) If I start ekiga with my default mixer setting ekiga does not work: >>no microphone input, and very quiet output. >> >>So I find that I freqently need to adjust mixer settings depending on >>which application I am running. mplayer, realplayer [spit], aplay, >>timidity, aplaymidi, ekiga and so on... > > > That's a good justification :-) :-) And I forgot one of the most important:- 5) If I am running another sound application and a call comes in to ekiga, I don't have time to launch a mixer control program, and fiddle with the settings before answering in ekiga... My current bash script does the job, but I wonder why other people don't (apparently) have the same problem. A E Lawrence From sevmek at free.fr Sat Dec 23 22:25:37 2006 From: sevmek at free.fr (yannick) Date: Sat, 23 Dec 2006 23:25:37 +0100 Subject: [Ekiga-list] ekiga help system In-Reply-To: <458D968D.80609@ozob.net> References: <458D968D.80609@ozob.net> Message-ID: <1166912738.8056.17.camel@achille> Le samedi 23 d?cembre 2006 ? 14:50 -0600, Gene Imes a ?crit : > I use gentoo which has an automatic installer. What must I do to get > ekiga help to work? You need the gnome help reader : "yelp" Regards, Yannick > > Thanks, > > -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From dsandras at seconix.com Sat Dec 23 22:30:27 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 23 Dec 2006 23:30:27 +0100 Subject: [Ekiga-list] Ekiga.net SIP Server Moved Message-ID: <1166913027.6738.42.camel@golgoth01> Hello to all, I have moved the Ekiga.net SIP server and associated services to its new host. I have updated the IP address of the server, the DNS server should shortly make ekiga.net point to 86.64.162.35. If it doesn't, then it means you are still registering to the old server. The consequences are the following : - you can not reach users registered to the new server - users registered to the new server can not reach you - if the old server had sent you an e-mail so that you can confirm your account, it will not be possible to confirm it on the old server. You will have to wait for your DNS server to point to the new server in order to be able to confirm the account. The new server also has a new module for audio conferencing, using the same numbers. I will make an official announcement later. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Sun Dec 24 12:56:41 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sun, 24 Dec 2006 13:56:41 +0100 Subject: [Ekiga-list] Peering with SIPBroker enabled Message-ID: <1166965001.3525.7.camel@golgoth01> Hello to all, While migrating Ekiga.net to the new server, I enabled peering with SIPBroker. What does that mean? That means that while being registered to Ekiga.net, you can reach users registered to other networks. For example, sip:613 at fwd.pulver.com is an echo test. Formerly, you were registering to Ekiga.net, and were calling : - sip:500 at ekiga.net or - sip:613 at fwd.pulver.com Now, you can still do things that way, but you can also check the following prefixes table : http://www.sipbroker.com/sipbroker/action/providerWhitePages You see that the prefix for pulver.com is *393, and you can simply dial : - sip:*393613 at ekiga.net to be connected to sip:613 at fwd.pulver.com If Ekiga.net is the "default" SIP service, you do not even need to specify the @ekiga.net part. Simply call sip:*393613 just like if you were calling sip:500. Enjoy, -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From gh at gregor-horvath.com Mon Dec 25 11:15:57 2006 From: gh at gregor-horvath.com (Gregor Horvath) Date: Mon, 25 Dec 2006 12:15:57 +0100 Subject: [Ekiga-list] Sipcall and Ekiga In-Reply-To: <1166906773.6738.26.camel@golgoth01> References: <458B8080.9070803@gregor-horvath.com> <1166870079.3522.11.camel@golgoth01> <458D16B7.70903@gregor-horvath.com> <1166879156.3522.15.camel@golgoth01> <458D5DC3.4020101@gregor-horvath.com> <1166906773.6738.26.camel@golgoth01> Message-ID: <458FB2ED.8030109@gregor-horvath.com> Damien Sandras schrieb: > Le samedi 23 d?cembre 2006 ? 17:48 +0100, Gregor Horvath a ?crit : >> Thank's. I have tried and there is some progress. Now the called mobile >> phone rings one time but then the connection is closed and ekiga says >> connection was terminated because of an error. >> Here's the log: >> >> http://gregor-horvath.com/output2.txt >> > > Can you try without video? yes now It seems to work, altough I still have some sound issues on my laptop, but these seems to be unrelated to this problem. Is Sipcall doing something wrong by advertising the wrong name/ip address or is it a problem with ekiga? Many thank's for your help. -- Gregor From encompass at gmail.com Mon Dec 25 11:35:24 2006 From: encompass at gmail.com (Jason (spot) Brower) Date: Mon, 25 Dec 2006 13:35:24 +0200 Subject: [Ekiga-list] When placing any call I get bad sound.... Message-ID: <1eb1f6fa0612250335u8760bfem9b6b45bbd72a7f87@mail.gmail.com> I am trying to call my family in america but there voice sounds bad. As if they were cutting in an out very very fast. Or like they were talking into a fan. (You know you have done it! :P) Any ideas on how to make it work properly? MP3 playback is fine. I can't also do a test call with the same results as above. I have a snd-hda-intel driver with ubuntu 6.10 and ekiga 2.0.3. Any ideas or pointers? -- Jason Brower Gmail has over 2.7gb of storage space and it is growing? What does your web mail have? -------------- next part -------------- An HTML attachment was scrubbed... URL: From dsandras at seconix.com Mon Dec 25 17:30:15 2006 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 25 Dec 2006 18:30:15 +0100 Subject: [Ekiga-list] When placing any call I get bad sound.... In-Reply-To: <1eb1f6fa0612250335u8760bfem9b6b45bbd72a7f87@mail.gmail.com> References: <1eb1f6fa0612250335u8760bfem9b6b45bbd72a7f87@mail.gmail.com> Message-ID: <1167067815.11659.7.camel@golgoth01> Le lundi 25 d?cembre 2006 ? 13:35 +0200, Jason (spot) Brower a ?crit : > I am trying to call my family in america but there voice sounds bad. > As if they were cutting in an out very very fast. Or like they were > talking into a fan. (You know you have done it! :P) Wouldn't they be using the internal mic of a laptop or something similar? > Any ideas on how to make it work properly? > MP3 playback is fine. I can't also do a test call with the same > results as above. > I have a snd-hda-intel driver with ubuntu 6.10 and ekiga 2.0.3. > Any ideas or pointers? -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Mon Dec 25 17:30:48 2006 From: dsandras at seconix.com (Damien Sandras) Date: Mon, 25 Dec 2006 18:30:48 +0100 Subject: [Ekiga-list] Sipcall and Ekiga In-Reply-To: <458FB2ED.8030109@gregor-horvath.com> References: <458B8080.9070803@gregor-horvath.com> <1166870079.3522.11.camel@golgoth01> <458D16B7.70903@gregor-horvath.com> <1166879156.3522.15.camel@golgoth01> <458D5DC3.4020101@gregor-horvath.com> <1166906773.6738.26.camel@golgoth01> <458FB2ED.8030109@gregor-horvath.com> Message-ID: <1167067848.11659.9.camel@golgoth01> Le lundi 25 d?cembre 2006 ? 12:15 +0100, Gregor Horvath a ?crit : > Damien Sandras schrieb: > > Le samedi 23 d?cembre 2006 ? 17:48 +0100, Gregor Horvath a ?crit : > > > >> Thank's. I have tried and there is some progress. Now the called mobile > >> phone rings one time but then the connection is closed and ekiga says > >> connection was terminated because of an error. > >> Here's the log: > >> > >> http://gregor-horvath.com/output2.txt > >> > > > > Can you try without video? > > yes now It seems to work, altough I still have some sound issues on my > laptop, but these seems to be unrelated to this problem. > > Is Sipcall doing something wrong by advertising the wrong name/ip > address or is it a problem with ekiga? > I have no idea. I can not reproduce a problem here. That's weird. > Many thank's for your help. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From encompass at gmail.com Mon Dec 25 19:26:23 2006 From: encompass at gmail.com (Jason (spot) Brower) Date: Mon, 25 Dec 2006 21:26:23 +0200 Subject: [Ekiga-list] When placing any call I get bad sound.... In-Reply-To: <1167067815.11659.7.camel@golgoth01> References: <1eb1f6fa0612250335u8760bfem9b6b45bbd72a7f87@mail.gmail.com> <1167067815.11659.7.camel@golgoth01> Message-ID: <1eb1f6fa0612251126hda2d195v1e33b91d34b61a6c@mail.gmail.com> I, finally, found a nice wiki from ekiga that solved the issue. my card as new as it is... doesn't support that many tracks... running dmix fixes the problem perfectly. To bad my card can't jsut do it on it's own. Thanks for the help though. On 12/25/06, Damien Sandras wrote: > > Le lundi 25 d?cembre 2006 ? 13:35 +0200, Jason (spot) Brower a ?crit : > > I am trying to call my family in america but there voice sounds bad. > > As if they were cutting in an out very very fast. Or like they were > > talking into a fan. (You know you have done it! :P) > > > Wouldn't they be using the internal mic of a laptop or something > similar? > > > Any ideas on how to make it work properly? > > MP3 playback is fine. I can't also do a test call with the same > > results as above. > > I have a snd-hda-intel driver with ubuntu 6.10 and ekiga 2.0.3. > > Any ideas or pointers? > > -- > _ Damien Sandras > (o- > //\ Ekiga Softphone : http://www.ekiga.org/ > v_/_ NOVACOM : http://www.novacom.be/ > FOSDEM : http://www.fosdem.org/ > SIP Phone : sip:dsandras at ekiga.net > > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > -- Jason Brower Gmail has over 2.7gb of storage space and it is growing? What does your web mail have? -------------- next part -------------- An HTML attachment was scrubbed... URL: From bbagger at gmail.com Mon Dec 25 20:22:27 2006 From: bbagger at gmail.com (Bent Bagger) Date: Mon, 25 Dec 2006 21:22:27 +0100 Subject: [Ekiga-list] Peering with SIPBroker enabled In-Reply-To: <1166965001.3525.7.camel@golgoth01> References: <1166965001.3525.7.camel@golgoth01> Message-ID: <2e19719f0612251222l61bd2552j2f4a869fbffcd176@mail.gmail.com> Hi Damien 2006/12/24, Damien Sandras : > > While migrating Ekiga.net to the new server, I enabled peering with > SIPBroker. > What is the prefix to get from ekiga.net to SIPBroker? > > You see that the prefix for pulver.com is *393, and you can simply > dial : > - sip:*393613 at ekiga.net to be connected to sip:613 at fwd.pulver.com > I have tried this (through my Asterisk) and I get a busy signal back from ekiga.net. '*' apparently isn't enough of a prefix for ekiga.net Merry Chrisymas to all. Bent From typhoon at aanet.com.au Mon Dec 25 20:26:59 2006 From: typhoon at aanet.com.au (Typhoon) Date: Tue, 26 Dec 2006 07:26:59 +1100 Subject: [Ekiga-list] Peering with SIPBroker enabled In-Reply-To: <2e19719f0612251222l61bd2552j2f4a869fbffcd176@mail.gmail.com> References: <1166965001.3525.7.camel@golgoth01> <2e19719f0612251222l61bd2552j2f4a869fbffcd176@mail.gmail.com> Message-ID: <20061226072659.b4e2e70a.typhoon@aanet.com.au> On Mon, 25 Dec 2006 21:22:27 +0100 "Bent Bagger" wrote: > Hi Damien > > 2006/12/24, Damien Sandras : > > > > While migrating Ekiga.net to the new server, I enabled peering with > > SIPBroker. > > > > What is the prefix to get from ekiga.net to SIPBroker? > > > > > You see that the prefix for pulver.com is *393, and you can simply > > dial : > > - sip:*393613 at ekiga.net to be connected to sip:613 at fwd.pulver.com > > > I have tried this (through my Asterisk) and I get a busy signal back > from ekiga.net. '*' apparently isn't enough of a prefix for ekiga.net I just tried it through Ekiga - no problem. And also no problem using *393613 alone when having Ekiga set as the default account. Nice going Damien!! > > Merry Chrisymas to all. > > Bent > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list > From sevmek at free.fr Mon Dec 25 21:33:47 2006 From: sevmek at free.fr (yannick) Date: Mon, 25 Dec 2006 22:33:47 +0100 Subject: [Ekiga-list] Peering with SIPBroker enabled In-Reply-To: <20061226072659.b4e2e70a.typhoon@aanet.com.au> References: <1166965001.3525.7.camel@golgoth01> <2e19719f0612251222l61bd2552j2f4a869fbffcd176@mail.gmail.com> <20061226072659.b4e2e70a.typhoon@aanet.com.au> Message-ID: <1167082428.1724.18.camel@achille> Le mardi 26 d?cembre 2006 ? 07:26 +1100, Typhoon a ?crit : > I just tried it through Ekiga - no problem. And also no problem using > *393613 alone when having Ekiga set as the default account. Nice going > Damien!! > Same here, nice job! :) Regards, Yannick -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From sevmek at free.fr Tue Dec 26 19:29:12 2006 From: sevmek at free.fr (yannick) Date: Tue, 26 Dec 2006 20:29:12 +0100 Subject: [Ekiga-list] Peering with SIPBroker enabled In-Reply-To: <1167082428.1724.18.camel@achille> References: <1166965001.3525.7.camel@golgoth01> <2e19719f0612251222l61bd2552j2f4a869fbffcd176@mail.gmail.com> <20061226072659.b4e2e70a.typhoon@aanet.com.au> <1167082428.1724.18.camel@achille> Message-ID: <1167161352.1724.24.camel@achille> Le lundi 25 d?cembre 2006 ? 22:33 +0100, yannick a ?crit : > Le mardi 26 d?cembre 2006 ? 07:26 +1100, Typhoon a ?crit : > > I just tried it through Ekiga - no problem. And also no problem using > > *393613 alone when having Ekiga set as the default account. Nice going > > Damien!! After a quick search a found some echo tests or conference rooms numbers working fine using an ekiga.net account: http://wiki.ekiga.org/index.php/Fun_Numbers Feel free to add more ;) Regards, Yannick > > > > Same here, nice job! :) > > Regards, > Yannick > > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From bbagger at gmail.com Wed Dec 27 16:07:39 2006 From: bbagger at gmail.com (Bent Bagger) Date: Wed, 27 Dec 2006 17:07:39 +0100 Subject: [Ekiga-list] Peering with SIPBroker enabled In-Reply-To: <1167161352.1724.24.camel@achille> References: <1166965001.3525.7.camel@golgoth01> <2e19719f0612251222l61bd2552j2f4a869fbffcd176@mail.gmail.com> <20061226072659.b4e2e70a.typhoon@aanet.com.au> <1167082428.1724.18.camel@achille> <1167161352.1724.24.camel@achille> Message-ID: <2e19719f0612270807n724477dfq729bbe802117045a@mail.gmail.com> Maybe I should make myself a little more clearer: When I try to call *393613 at ekiga.net I get a 'not found' response back. Here is the short version of an Ethereal trace: 1 0.000000 83.73.254.57 -> 213.186.62.145 SIP/SDP Request: INVITE sip:*393613 at ekiga.net, with session description 2 0.083174 213.186.62.145 -> 83.73.254.57 SIP Status: 404 Not found 3 0.083930 83.73.254.57 -> 213.186.62.145 SIP Request: ACK sip:*393613 at ekiga.net When I call 500 at ekiga.net, I am connected and get this: 1 0.000000 83.73.254.57 -> 213.186.62.145 SIP/SDP Request: INVITE sip:500 at ekiga.net, with session description 2 0.083229 213.186.62.145 -> 83.73.254.57 SIP Status: 407 Proxy Authentication Required 3 0.084030 83.73.254.57 -> 213.186.62.145 SIP Request: ACK sip:500 at ekiga.net 4 0.085204 83.73.254.57 -> 213.186.62.145 SIP/SDP Request: INVITE sip:500 at ekiga.net, with session description 5 0.177261 213.186.62.145 -> 83.73.254.57 SIP Status: 100 trying -- your call is important to us 6 0.179952 213.186.62.145 -> 83.73.254.57 SIP/SDP Status: 200 OK, with session description 7 0.182308 83.73.254.57 -> 213.186.62.145 SIP Request: ACK sip:500 at 213.186.62.145:5080 8 7.404837 83.73.254.57 -> 213.186.62.145 SIP Request: BYE sip:500 at 213.186.62.145:5080 9 7.482955 213.186.62.145 -> 83.73.254.57 SIP Status: 200 OK The difference is obvious, but why??? Any help will be much appreciated. The full traces are available if desired. Kind regards, Bent From seandarcy2 at gmail.com Wed Dec 27 21:16:24 2006 From: seandarcy2 at gmail.com (sean) Date: Wed, 27 Dec 2006 16:16:24 -0500 Subject: [Ekiga-list] Ekiga.net SIP Server Moved In-Reply-To: <1166913027.6738.42.camel@golgoth01> References: <1166913027.6738.42.camel@golgoth01> Message-ID: Damien Sandras wrote: > Hello to all, > > > I have moved the Ekiga.net SIP server and associated services to its new > host. > > I have updated the IP address of the server, the DNS server should > shortly make ekiga.net point to 86.64.162.35. > > If it doesn't, then it means you are still registering to the old > server. The consequences are the following : > - you can not reach users registered to the new server > - users registered to the new server can not reach you > - if the old server had sent you an e-mail so that you can confirm your > account, it will not be possible to confirm it on the old server. You > will have to wait for your DNS server to point to the new server in > order to be able to confirm the account. > > The new server also has a new module for audio conferencing, using the > same numbers. > > I will make an official announcement later. Using asterisk I get: [Dec 27 14:12:00] NOTICE[20088]: chan_sip.c:7087 sip_reg_timeout: -- Registration for 'xxx at ekiga.net' timed out, trying again (Attempt #41) -- Got SIP response 406 "Not Acceptable" back from 86.64.162.35 Here's the ekiga portion of sip.conf: register => xxxxx:@ekiga.net [ekiga] type=user host=ekiga.net fromuser=xxx at ekiga.net username=xxx at ekiga.net secret= fromdomain=ekiga.net qualify=yes disallow=all allow=speex allow=ulaw allow=alaw allow=gsm ;dtmfmode=rfc2833 canreinvite=no context=incoming insecure=port,invite nat=yes I've logged into the new ekiga.net with my user name and password - secret. That worked. This used to work last week. sean From seandarcy2 at gmail.com Thu Dec 28 02:11:06 2006 From: seandarcy2 at gmail.com (sean) Date: Wed, 27 Dec 2006 21:11:06 -0500 Subject: [Ekiga-list] Ekiga.net SIP Server Moved In-Reply-To: References: <1166913027.6738.42.camel@golgoth01> Message-ID: sean wrote: > Damien Sandras wrote: >> Hello to all, >> >> >> I have moved the Ekiga.net SIP server and associated services to its new >> host. >> >> I have updated the IP address of the server, the DNS server should >> shortly make ekiga.net point to 86.64.162.35. >> >> If it doesn't, then it means you are still registering to the old >> server. The consequences are the following : >> - you can not reach users registered to the new server >> - users registered to the new server can not reach you >> - if the old server had sent you an e-mail so that you can confirm your >> account, it will not be possible to confirm it on the old server. You >> will have to wait for your DNS server to point to the new server in >> order to be able to confirm the account. >> >> The new server also has a new module for audio conferencing, using the >> same numbers. >> >> I will make an official announcement later. > > Using asterisk I get: > > [Dec 27 14:12:00] NOTICE[20088]: chan_sip.c:7087 > sip_reg_timeout: -- Registration for 'xxx at ekiga.net' > timed out, trying again (Attempt #41) > -- Got SIP response 406 "Not Acceptable" back from > 86.64.162.35 > > Here's the ekiga portion of sip.conf: > > register => xxxxx:@ekiga.net > > [ekiga] > type=user > host=ekiga.net > fromuser=xxx at ekiga.net > username=xxx at ekiga.net > secret= > fromdomain=ekiga.net > qualify=yes > disallow=all > allow=speex > allow=ulaw > allow=alaw > allow=gsm > ;dtmfmode=rfc2833 > canreinvite=no > context=incoming > insecure=port,invite > nat=yes > > I've logged into the new ekiga.net with my user name and > password - secret. That worked. > > This used to work last week. > > sean I can register from ekiga itself. sean From sevmek at free.fr Fri Dec 29 00:15:08 2006 From: sevmek at free.fr (yannick) Date: Fri, 29 Dec 2006 01:15:08 +0100 Subject: [Ekiga-list] [wiki] Peering, Enum, Fun numbers... In-Reply-To: <1166965001.3525.7.camel@golgoth01> References: <1166965001.3525.7.camel@golgoth01> Message-ID: <1167351308.1724.36.camel@achille> Hi, Twen (mostly) and I have worked on the wiki for those topics : peering, Enum and fun numbers using the previous work of Simon. Here is the result: http://wiki.ekiga.org/index.php/Main_Page http://wiki.ekiga.org/index.php/Peering http://wiki.ekiga.org/index.php/Enum http://wiki.ekiga.org/index.php/Fun_Numbers Review of our work is of course welcome. Regards, Yannick Le dimanche 24 d?cembre 2006 ? 13:56 +0100, Damien Sandras a ?crit : > Hello to all, > > > While migrating Ekiga.net to the new server, I enabled peering with > SIPBroker. > > What does that mean? > > That means that while being registered to Ekiga.net, you can reach users > registered to other networks. > > For example, sip:613 at fwd.pulver.com is an echo test. Formerly, you were > registering to Ekiga.net, and were calling : > - sip:500 at ekiga.net > or > - sip:613 at fwd.pulver.com > > Now, you can still do things that way, but you can also check the > following prefixes table : > http://www.sipbroker.com/sipbroker/action/providerWhitePages > > You see that the prefix for pulver.com is *393, and you can simply > dial : > - sip:*393613 at ekiga.net to be connected to sip:613 at fwd.pulver.com > > If Ekiga.net is the "default" SIP service, you do not even need to > specify the @ekiga.net part. Simply call sip:*393613 just like if you > were calling sip:500. > > Enjoy, -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From simon at mungewell.org Fri Dec 29 04:59:24 2006 From: simon at mungewell.org (Simon Wood) Date: Thu, 28 Dec 2006 21:59:24 -0700 Subject: [Ekiga-list] [wiki] Peering, Enum, Fun numbers... In-Reply-To: <1167351308.1724.36.camel@achille> References: <1166965001.3525.7.camel@golgoth01> <1167351308.1724.36.camel@achille> Message-ID: <20061228215924.cbbffc77.simon@mungewell.org> Hi Yannick, Fantastic work! I've been in and made some minor alterations to ENUM and Peering. I didn't want change Peering too much, but I believe that the example using international format numbers is a little confusing as not all providers provide a 'full' number. For example FWD numbers are only 6 digit and have no geological basis, so the peering example to FWD would be a little more simple with something like '*393 123456'. It's truely progressing that some European countries are allocating area codes to represent VoIP providers. Here in North America there doesn't appear to be that 'intellegence' (or maybe there aren't enough area codes left). Numbers are allocated on a per-number basis as the whole backbone in digital anyhow. I am unaware of PSTN and Cell providers which peer with other networks, I believe that it is just a VoIP thing. If they do, surely they do it automatically and no prefix is required.... Anyway, good job. Simon. From geboyd53 at comcast.net Fri Dec 29 10:04:28 2006 From: geboyd53 at comcast.net (George Boyd) Date: Fri, 29 Dec 2006 02:04:28 -0800 Subject: [Ekiga-list] [wiki] Peering, Enum, Fun numbers... In-Reply-To: <1167351308.1724.36.camel@achille> References: <1166965001.3525.7.camel@golgoth01> <1167351308.1724.36.camel@achille> Message-ID: <1167386668.1613.32.camel@george> I read the info on the sites given below. I've tried to set an enum account for use with Ekiga. I registered with e164.org. I got the return verification call that gave me my pin number. However when I try to call using ENUM (to my own number) with the directions provided, it says user does not exist. Another strange thing was that it wouldn't let me put my username at ekiga.net or my alias#@ekiga.net. It said the weren't registered. But it did accept my PSTN number and was able to call me back to give me my pin number. Help Please !!! George On Fri, 2006-12-29 at 01:15 +0100, yannick wrote: > Hi, > > Twen (mostly) and I have worked on the wiki for those topics : peering, > Enum and fun numbers using the previous work of Simon. > > Here is the result: > http://wiki.ekiga.org/index.php/Main_Page > http://wiki.ekiga.org/index.php/Peering > http://wiki.ekiga.org/index.php/Enum > http://wiki.ekiga.org/index.php/Fun_Numbers > Review of our work is of course welcome. > > Regards, > Yannick > > Le dimanche 24 d?cembre 2006 ? 13:56 +0100, Damien Sandras a ?crit : > > Hello to all, > > > > > > While migrating Ekiga.net to the new server, I enabled peering with > > SIPBroker. > > > > What does that mean? > > > > That means that while being registered to Ekiga.net, you can reach users > > registered to other networks. > > > > For example, sip:613 at fwd.pulver.com is an echo test. Formerly, you were > > registering to Ekiga.net, and were calling : > > - sip:500 at ekiga.net > > or > > - sip:613 at fwd.pulver.com > > > > Now, you can still do things that way, but you can also check the > > following prefixes table : > > http://www.sipbroker.com/sipbroker/action/providerWhitePages > > > > You see that the prefix for pulver.com is *393, and you can simply > > dial : > > - sip:*393613 at ekiga.net to be connected to sip:613 at fwd.pulver.com > > > > If Ekiga.net is the "default" SIP service, you do not even need to > > specify the @ekiga.net part. Simply call sip:*393613 just like if you > > were calling sip:500. > > > > Enjoy, > -- > Me joindre en t?l?phonie IP / vid?oconf?rence ? > sip:yannick at ekiga.net > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list From sevmek at free.fr Fri Dec 29 11:40:42 2006 From: sevmek at free.fr (yannick) Date: Fri, 29 Dec 2006 12:40:42 +0100 Subject: [Ekiga-list] [wiki] How to check your Enum registration ? In-Reply-To: <1167386668.1613.32.camel@george> References: <1166965001.3525.7.camel@golgoth01> <1167351308.1724.36.camel@achille> <1167386668.1613.32.camel@george> Message-ID: <1167392442.31794.6.camel@achille> Hi, Le vendredi 29 d?cembre 2006 ? 02:04 -0800, George Boyd a ?crit : > I read the info on the sites given below. I've tried to set an enum > account for use with Ekiga. I registered with e164.org. I got the return > verification call that gave me my pin number. > I've not tried myself this option, I do not know if the process is complet. > However when I try to call using ENUM (to my own number) with the > directions provided, it says user does not exist. You can test is you are registered: In the Fun numbers page you have this number which you can dial using an ekiga.net account: *013 17853950049 at ekiga.net Kansas State University Test Phone Number Since *013 is the peering prefix to SipBroker Enum server, the Enum number is 17853950049 Using the SipBroker web interface with this number like this : http://www.sipbroker.com/enum/17853950049 You'll get back an XML file like this one: 17853950049 e164.arpa. 17853950049 e164.org. sip:17853950049 at star.telecom.ksu.edu 17853950049 e164.info. 17853950049 e164.televolution.net. 17853950049 enum.org. Where you can see this number is registered using e164.org. as root Enum, the sip URI is sip:17853950049 at star.telecom.ksu.edu You can do the same with your Enum number to verify it is registered and point to the right sip URI. Regards, Yannick > > Another strange thing was that it wouldn't let me put my > username at ekiga.net or my alias#@ekiga.net. It said the weren't > registered. But it did accept my PSTN number and was able to call me > back to give me my pin number. > > Help Please !!! > George > > > On Fri, 2006-12-29 at 01:15 +0100, yannick wrote: > > Hi, > > > > Twen (mostly) and I have worked on the wiki for those topics : peering, > > Enum and fun numbers using the previous work of Simon. > > > > Here is the result: > > http://wiki.ekiga.org/index.php/Main_Page > > http://wiki.ekiga.org/index.php/Peering > > http://wiki.ekiga.org/index.php/Enum > > http://wiki.ekiga.org/index.php/Fun_Numbers > > Review of our work is of course welcome. > > > > Regards, > > Yannick > > > > Le dimanche 24 d?cembre 2006 ? 13:56 +0100, Damien Sandras a ?crit : > > > Hello to all, > > > > > > > > > While migrating Ekiga.net to the new server, I enabled peering with > > > SIPBroker. > > > > > > What does that mean? > > > > > > That means that while being registered to Ekiga.net, you can reach users > > > registered to other networks. > > > > > > For example, sip:613 at fwd.pulver.com is an echo test. Formerly, you were > > > registering to Ekiga.net, and were calling : > > > - sip:500 at ekiga.net > > > or > > > - sip:613 at fwd.pulver.com > > > > > > Now, you can still do things that way, but you can also check the > > > following prefixes table : > > > http://www.sipbroker.com/sipbroker/action/providerWhitePages > > > > > > You see that the prefix for pulver.com is *393, and you can simply > > > dial : > > > - sip:*393613 at ekiga.net to be connected to sip:613 at fwd.pulver.com > > > > > > If Ekiga.net is the "default" SIP service, you do not even need to > > > specify the @ekiga.net part. Simply call sip:*393613 just like if you > > > were calling sip:500. > > > > > > Enjoy, > > -- > > Me joindre en t?l?phonie IP / vid?oconf?rence ? > > sip:yannick at ekiga.net > > > > _______________________________________________ > > ekiga-list mailing list > > ekiga-list at gnome.org > > http://mail.gnome.org/mailman/listinfo/ekiga-list > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- Me joindre en t?l?phonie IP / vid?oconf?rence ? sip:yannick at ekiga.net From dsandras at seconix.com Fri Dec 29 11:53:53 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 29 Dec 2006 12:53:53 +0100 Subject: [Ekiga-list] Ekiga.net SIP Server Moved In-Reply-To: References: <1166913027.6738.42.camel@golgoth01> Message-ID: <1167393233.4383.2.camel@golgoth01> Le mercredi 27 d?cembre 2006 ? 16:16 -0500, sean a ?crit : > Damien Sandras wrote: > > Hello to all, > > > > > > I have moved the Ekiga.net SIP server and associated services to its new > > host. > > > > I have updated the IP address of the server, the DNS server should > > shortly make ekiga.net point to 86.64.162.35. > > > > If it doesn't, then it means you are still registering to the old > > server. The consequences are the following : > > - you can not reach users registered to the new server > > - users registered to the new server can not reach you > > - if the old server had sent you an e-mail so that you can confirm your > > account, it will not be possible to confirm it on the old server. You > > will have to wait for your DNS server to point to the new server in > > order to be able to confirm the account. > > > > The new server also has a new module for audio conferencing, using the > > same numbers. > > > > I will make an official announcement later. > > Using asterisk I get: > > [Dec 27 14:12:00] NOTICE[20088]: chan_sip.c:7087 > sip_reg_timeout: -- Registration for 'xxx at ekiga.net' > timed out, trying again (Attempt #41) > -- Got SIP response 406 "Not Acceptable" back from > 86.64.162.35 > > Here's the ekiga portion of sip.conf: > > register => xxxxx:@ekiga.net > > [ekiga] > type=user > host=ekiga.net > fromuser=xxx at ekiga.net > username=xxx at ekiga.net > secret= > fromdomain=ekiga.net > qualify=yes > disallow=all > allow=speex > allow=ulaw > allow=alaw > allow=gsm > ;dtmfmode=rfc2833 > canreinvite=no > context=incoming > insecure=port,invite > nat=yes > > I've logged into the new ekiga.net with my user name and > password - secret. That worked. > > This used to work last week. This is not due to the server migration. It is due to the fact that you are trying to register a private IP address. -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From dsandras at seconix.com Fri Dec 29 11:55:18 2006 From: dsandras at seconix.com (Damien Sandras) Date: Fri, 29 Dec 2006 12:55:18 +0100 Subject: [Ekiga-list] Peering with SIPBroker enabled In-Reply-To: <2e19719f0612270807n724477dfq729bbe802117045a@mail.gmail.com> References: <1166965001.3525.7.camel@golgoth01> <2e19719f0612251222l61bd2552j2f4a869fbffcd176@mail.gmail.com> <20061226072659.b4e2e70a.typhoon@aanet.com.au> <1167082428.1724.18.camel@achille> <1167161352.1724.24.camel@achille> <2e19719f0612270807n724477dfq729bbe802117045a@mail.gmail.com> Message-ID: <1167393318.4383.4.camel@golgoth01> Hi, Does it work with Ekiga? If it works with Ekiga, then it is an Asterisk setup issue... Le mercredi 27 d?cembre 2006 ? 17:07 +0100, Bent Bagger a ?crit : > Maybe I should make myself a little more clearer: When I try to call > *393613 at ekiga.net I get a 'not found' response back. Here is the short > version of an Ethereal trace: > > 1 0.000000 83.73.254.57 -> 213.186.62.145 SIP/SDP Request: INVITE > sip:*393613 at ekiga.net, with session description > 2 0.083174 213.186.62.145 -> 83.73.254.57 SIP Status: 404 Not found > 3 0.083930 83.73.254.57 -> 213.186.62.145 SIP Request: ACK > sip:*393613 at ekiga.net > > When I call 500 at ekiga.net, I am connected and get this: > > 1 0.000000 83.73.254.57 -> 213.186.62.145 SIP/SDP Request: INVITE > sip:500 at ekiga.net, with session description > 2 0.083229 213.186.62.145 -> 83.73.254.57 SIP Status: 407 Proxy > Authentication Required > 3 0.084030 83.73.254.57 -> 213.186.62.145 SIP Request: ACK sip:500 at ekiga.net > 4 0.085204 83.73.254.57 -> 213.186.62.145 SIP/SDP Request: INVITE > sip:500 at ekiga.net, with session description > 5 0.177261 213.186.62.145 -> 83.73.254.57 SIP Status: 100 trying > -- your call is important to us > 6 0.179952 213.186.62.145 -> 83.73.254.57 SIP/SDP Status: 200 OK, > with session description > 7 0.182308 83.73.254.57 -> 213.186.62.145 SIP Request: ACK > sip:500 at 213.186.62.145:5080 > 8 7.404837 83.73.254.57 -> 213.186.62.145 SIP Request: BYE > sip:500 at 213.186.62.145:5080 > 9 7.482955 213.186.62.145 -> 83.73.254.57 SIP Status: 200 OK > > The difference is obvious, but why??? Any help will be much appreciated. > > The full traces are available if desired. > > Kind regards, > Bent > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From bbagger at gmail.com Fri Dec 29 15:05:49 2006 From: bbagger at gmail.com (Bent Bagger) Date: Fri, 29 Dec 2006 16:05:49 +0100 Subject: [Ekiga-list] Peering with SIPBroker enabled In-Reply-To: <1167393318.4383.4.camel@golgoth01> References: <1166965001.3525.7.camel@golgoth01> <2e19719f0612251222l61bd2552j2f4a869fbffcd176@mail.gmail.com> <20061226072659.b4e2e70a.typhoon@aanet.com.au> <1167082428.1724.18.camel@achille> <1167161352.1724.24.camel@achille> <2e19719f0612270807n724477dfq729bbe802117045a@mail.gmail.com> <1167393318.4383.4.camel@golgoth01> Message-ID: <2e19719f0612290705o19a53c40y9b473a18025dce2d@mail.gmail.com> Hi Damien Once again, you were right on! 2006/12/29, Damien Sandras : > > Does it work with Ekiga? > Yes. > If it works with Ekiga, then it is an Asterisk setup issue... > It was an Asterisk issue. I had not restarted it, so it was still registered with the old Ekiga.net address (213.186.62.145). Now it is registered with the new one (86.64.162.35) and everything is OK. BTW It was the trace which Ekiga makes with the '-d 4' option that gave me the hint. It is a formidable tool. Thanks for your help. Kind regards, Bent From simon at mungewell.org Fri Dec 29 17:02:50 2006 From: simon at mungewell.org (Simon Wood) Date: Fri, 29 Dec 2006 10:02:50 -0700 Subject: [Ekiga-list] [wiki] Peering, Enum, Fun numbers... In-Reply-To: <1167386668.1613.32.camel@george> References: <1166965001.3525.7.camel@golgoth01> <1167351308.1724.36.camel@achille> <1167386668.1613.32.camel@george> Message-ID: <20061229100250.5c6156fb.simon@mungewell.org> Hi George, >From what you said you completed the authentication process, right? But I think that you have failed to connect a SIP account to the registered PSTN number. Once you have an account registered, add a PSTN number and verify (which it sound like you have done). Then add/connect a VoIP/SIP account to that PSTN number (under the 'Phone Numbers' tab, click 'ENUM records'). For example: Register account - Big_Fred Add Phone Number - '+1-123-555-4567' and authenticate. Connect SIP account - add '987654 at VoIP-provider' to ENUM record. You can also set 'White Pages' entry and 'Do Not Call'. You should now be able to call the PSTN number and get connected to the SIP account. You can check ENUM availability via a online lookup: http://nona.net/features/enum/ You enter the PSTN number and it searches for a match. If a match is found it will display it under the appropriate registra. They even have a Firefox search plugin. Cheers, Simon. From flippolis at yahoo.com Sat Dec 30 12:14:02 2006 From: flippolis at yahoo.com (Fabrizio Lippolis) Date: Sat, 30 Dec 2006 12:14:02 +0000 (UTC) Subject: [Ekiga-list] receiver complains doesn't hear me much Message-ID: Hi list, I have started using Ekiga to log into Voipstunt and call landline phones. The receiver complains often doesn't hear me much though I have raised the microphone slider in the audio tab in Ekiga and in the volume settings in Gnome. I have to talk with the microphone on my mouth and loud voice to be at least accettable. When I call Ekiga uses the GSM codec, maybe I should try something different? Anything else I could check? With Skype they can hear me fine but I would like not to use it. Best regards and wishes for 2007. Fabrizio From dsandras at seconix.com Sat Dec 30 13:11:30 2006 From: dsandras at seconix.com (Damien Sandras) Date: Sat, 30 Dec 2006 14:11:30 +0100 Subject: [Ekiga-list] receiver complains doesn't hear me much In-Reply-To: References: Message-ID: <1167484290.3799.4.camel@golgoth01> Hi, Le samedi 30 d?cembre 2006 ? 12:14 +0000, Fabrizio Lippolis a ?crit : > Hi list, > > I have started using Ekiga to log into Voipstunt and call landline phones. > The receiver complains often doesn't hear me much though I have raised the > microphone slider in the audio tab in Ekiga and in the volume settings in > Gnome. I have to talk with the microphone on my mouth and loud voice to be > at least accettable. When I call Ekiga uses the GSM codec, maybe I should > try something different? Anything else I could check? With Skype they can > hear me fine but I would like not to use it. > You are right not to use Skype. You could use another codec like G.711 (PCMU), perhaps that voipstunt is loosing some "audio gain" when converting audio. Also, you should open a sound mixer (the GNOME one or another one) and check if you have "Mic Boost" enabled. > Best regards and wishes for 2007. > > Fabrizio > > _______________________________________________ > ekiga-list mailing list > ekiga-list at gnome.org > http://mail.gnome.org/mailman/listinfo/ekiga-list -- _ Damien Sandras (o- //\ Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:dsandras at ekiga.net From law_ence.dev at ntlworld.com Sat Dec 30 15:08:04 2006 From: law_ence.dev at ntlworld.com (ael) Date: Sat, 30 Dec 2006 15:08:04 +0000 Subject: [Ekiga-list] receiver complains doesn't hear me much In-Reply-To: <1167484290.3799.4.camel@golgoth01> References: <1167484290.3799.4.camel@golgoth01> Message-ID: <459680D4.8000904@ntlworld.com> > Le samedi 30 d?cembre 2006 ? 12:14 +0000, Fabrizio Lippolis a ?crit : >>The receiver complains often doesn't hear me much though I have raised the >>microphone slider in the audio tab in Ekiga and in the volume settings in >>Gnome. I have to talk with the microphone on my mouth and loud voice to be >>at least accettable. [..snip..] > Also, you should open a sound mixer (the GNOME one or another one) and > check if you have "Mic Boost" enabled. And in addition to what Damien says, if you are using alsa, it would be a good idea to use amixer (and then alsamixer) to examine the controls beyond just "Mic boost" on your sound card. These are often highly non intuitive: I gather that alsa just reads firmware labels from the hardware and uses those names which are often bizarre. You may need to experiment a good deal to find out what does what. I had just the sort of problem that you are describing on more than one machine with different models of sound cards: in each case exploration of the sound card controls as above solved the problem. Don't overlook the "capture" controls. A Lawrence From frank.lynch at gmail.com Sun Dec 31 20:18:46 2006 From: frank.lynch at gmail.com (Frank Lynch) Date: Sun, 31 Dec 2006 15:18:46 -0500 Subject: [Ekiga-list] gconf errors on win32? Message-ID: <24fb4ebb0612311218m37707e61xc51f30a7acb326b0@mail.gmail.com> Hi, I'm trying to get ekiga up and running on a windows xp box. This box once had ekiga working, however it was uninstalled and are now after I re-installing gtk+, and ekiga I'm getting the attached error re gconf. The faq doesn't really address how gconf works on windows, so I'm looking for tips on how to debug/correct this. Any links on how ekiga works with gconf or even how gconf itself works on windows would be appreciated. thanks & happy new year!, --Frank -------------- next part -------------- A non-text attachment was scrubbed... Name: error.gif Type: image/gif Size: 7327 bytes Desc: not available URL: